xref: /illumos-gate/usr/src/uts/common/sys/sdcard/sda.h (revision 4f364e7c95ee7fd9d5bbeddc1940e92405bb0e72)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
23  */
24 
25 #ifndef	_SYS_SDCARD_SDA_H
26 #define	_SYS_SDCARD_SDA_H
27 
28 #include <sys/types.h>
29 #include <sys/note.h>
30 
31 #ifdef	__cplusplus
32 extern "C" {
33 #endif
34 
35 /*
36  * SD card common framework.  This module provides most of the common
37  * functionality so that SecureDigital host adapters and client devices
38  * (such as the sdmem driver) can share common code.
39  */
40 
41 /*
42  * SD Commands.  Commmand format is 48-bits as follows:
43  *
44  * bits		value		desc
45  * -------------------------------------------
46  * 47		0		start bit
47  * 46		1		transmission bit
48  * 45:40	cmd		command index (see values listed below)
49  * 39:8		arg		32-bit command argument
50  * 7:1		crc7		crc7 check value
51  * 0		1		end bit
52  * -------------------------------------------
53  */
54 typedef enum {
55 	CMD_GO_IDLE = 0,
56 	CMD_SEND_OCR = 1,		/* MMC only */
57 	CMD_BCAST_CID = 2,
58 	CMD_SEND_RCA = 3,
59 	CMD_SET_DSR = 4,
60 	CMD_IO_SEND_OCR = 5,		/* SDIO only */
61 	CMD_SWITCH_FUNC = 6,
62 	CMD_SELECT_CARD = 7,
63 	CMD_SEND_IF_COND = 8,
64 	CMD_SEND_CSD = 9,
65 	CMD_SEND_CID = 10,
66 	CMD_STOP_TRANSMIT = 12,
67 	CMD_SEND_STATUS = 13,
68 	CMD_GO_INACTIVE = 15,
69 	CMD_SET_BLOCKLEN = 16,
70 	CMD_READ_SINGLE = 17,
71 	CMD_READ_MULTI = 18,
72 	CMD_WRITE_SINGLE = 24,
73 	CMD_WRITE_MULTI = 25,
74 	CMD_PROGRAM_CSD = 27,
75 	CMD_SET_WRITE_PROT = 28,
76 	CMD_CLR_WRITE_PROT = 29,
77 	CMD_SEND_WRITE_PROT = 30,
78 	CMD_ERASE_START = 32,
79 	CMD_ERASE_END = 33,
80 	CMD_ERASE = 38,
81 	CMD_LOCK = 42,
82 	CMD_IO_RW_DIRECT = 52,
83 	CMD_IO_RW_EXTENDED = 53,
84 	CMD_APP_CMD = 55,
85 	CMD_GEN_CMD = 56,
86 	/* APP CMD values, send ACMD first */
87 	ACMD_SET_BUS_WIDTH = 6,
88 	ACMD_SD_STATUS = 13,
89 	ACMD_SEND_NUM_WR_BLKS = 22,
90 	ACMD_SET_WR_BLK_ERASE_COUNT = 23,
91 	ACMD_SD_SEND_OCR = 41,
92 	ACMD_SET_CLR_CARD_DETECT = 42,
93 	ACMD_SEND_SCR = 51
94 } sda_index_t;
95 
96 /*
97  * Classes of response type.  Note that we encode the "busy bit" as
98  * value 0x10.
99  */
100 typedef enum {
101 	R0 = 0,
102 	R1 = 1,
103 	R2 = 2,
104 	R3 = 3,
105 	R4 = 4,
106 	R5 = 5,
107 	R6 = 6,
108 	R7 = 7,
109 	Rb = 0x10,
110 	R1b = 0x11,
111 	R5b = 0x15
112 } sda_rtype_t;
113 
114 /*
115  * R1 status bits.
116  */
117 #define	R1_OUT_OF_RANGE		(1U << 31)
118 #define	R1_ADDRESS_ERROR	(1U << 30)
119 #define	R1_BLOCK_LEN_ERROR	(1U << 29)
120 #define	R1_ERASE_SEQ_ERROR	(1U << 28)
121 #define	R1_ERASE_PARAM		(1U << 27)
122 #define	R1_WP_VIOLATION		(1U << 26)
123 #define	R1_CARD_IS_LOCKED	(1U << 25)
124 #define	R1_LOCK_FAILED		(1U << 24)
125 #define	R1_COM_CRC_ERROR	(1U << 23)
126 #define	R1_ILLEGAL_COMMAND	(1U << 22)
127 #define	R1_CARD_ECC_FAILED	(1U << 21)
128 #define	R1_CC_ERROR		(1U << 20)
129 #define	R1_ERROR		(1U << 19)
130 #define	R1_CSD_OVERWRITE	(1U << 16)
131 #define	R1_WP_ERASE_SKIP	(1U << 15)
132 #define	R1_CARD_ECC_DIS		(1U << 14)
133 #define	R1_ERASE_RESET		(1U << 13)
134 #define	R1_READY_FOR_DATA	(1U << 8)
135 #define	R1_APP_CMD		(1U << 5)
136 #define	R1_AKE_SEQ_ERROR	(1U << 3)
137 
138 /*
139  * Note that R1_COM_CRC_ERR, R1_ILLEGAL_COMMAND, R1_ERASE_SEQ_ERROR, and
140  * R1_AKE_SEQ_ERROR errors are delayed error bits reported on the next
141  * command.  So we don't list them here.
142  */
143 #define	R1_ERRS	(\
144 	R1_ERROR | R1_OUT_OF_RANGE | R1_ADDRESS_ERROR | R1_BLOCK_LEN_ERROR | \
145 	R1_ERASE_PARAM | R1_WP_VIOLATION | R1_LOCK_FAILED | \
146 	R1_CARD_ECC_FAILED | R1_CC_ERROR | R1_CSD_OVERWRITE | \
147 	R1_WP_ERASE_SKIP)
148 
149 #define	R1_STATE(x)	(((x) & 0xf) >> 9)
150 
151 /*
152  * R5 status bits.
153  */
154 #define	R5_COM_CRC_ERROR	(1U << 7)
155 #define	R5_ILLEGAL_COMMAND	(1U << 6)
156 #define	R5_ERROR		(1U << 3)
157 #define	R5_RFU			(1U << 2)
158 #define	R5_FUNCTION_NUMBER	(1U << 1)
159 #define	R5_OUT_OF_RANGE		(1U << 0)
160 
161 #define	R5_ERRS	(R5_ERROR | R5_FUNCTION_NUMBER | R5_OUT_OF_RANGE)
162 
163 #define	R5_IO_STATE(x)	(((x) & 0x3) >> 4)
164 
165 /*
166  * R7 bits (CMD8).
167  */
168 #define	R7_VHS_27_36V		(1U << 8)
169 #define	R7_PATTERN		(0xAA)
170 
171 /*
172  * OCR bits.
173  */
174 #define	OCR_POWER_UP		(1U << 31)
175 #define	OCR_CCS			(1U << 30)
176 #define	OCR_FUNCS(x)		(((x) & 7) >> 28)	/* SDIO only */
177 #define	OCR_MEM_PRESENT		(1U << 27)		/* SDIO only */
178 #define	OCR_VOLTAGE_MASK	(0xffffffU)		/* (bits 0-23 */
179 #define	OCR_HI_MASK		(0xff8000U)		/* 2.7-3.6V */
180 #define	OCR_35_36V		(1U << 23)
181 #define	OCR_34_35V		(1U << 22)
182 #define	OCR_33_34V		(1U << 21)
183 #define	OCR_32_33V		(1U << 20)
184 #define	OCR_31_32V		(1U << 19)
185 #define	OCR_30_31V		(1U << 18)
186 #define	OCR_29_30V		(1U << 17)
187 #define	OCR_28_29V		(1U << 16)
188 #define	OCR_27_28V		(1U << 15)
189 #define	OCR_26_27V		(1U << 14)
190 #define	OCR_25_26V		(1U << 14)
191 #define	OCR_24_25V		(1U << 13)
192 #define	OCR_23_24V		(1U << 12)
193 #define	OCR_22_23V		(1U << 11)
194 #define	OCR_21_22V		(1U << 10)
195 #define	OCR_20_21V		(1U << 9)
196 #define	OCR_19_20V		(1U << 8)
197 #define	OCR_18_19V		(1U << 7)
198 #define	OCR_17_18V		(1U << 6)
199 
200 
201 /*
202  * Command structure.  Used internally by the framework, and by host
203  * drivers.  Note that it is forbidden to depend on the size of this
204  * structure.
205  */
206 typedef struct sda_cmd sda_cmd_t;
207 
208 struct sda_cmd {
209 	/*
210 	 * The ordering of these is done to maximize packing.
211 	 */
212 	sda_index_t		sc_index;	/* command name */
213 	sda_rtype_t		sc_rtype;	/* response type expected */
214 	uint16_t		sc_flags;
215 	uint32_t		sc_argument;	/* command argument */
216 
217 	uint32_t		sc_response[4];
218 
219 	uint16_t		sc_nblks;
220 	uint16_t		sc_blksz;
221 
222 	uint32_t		sc_resid;
223 
224 	ddi_dma_handle_t	sc_dmah;
225 	uint_t			sc_ndmac;	/* # DMA cookies */
226 	ddi_dma_cookie_t	sc_dmac;	/* actual DMA cookies */
227 	caddr_t			sc_kvaddr;	/* kernel virtual address */
228 
229 #define	SDA_CMDF_READ		0x0001		/* transfer direction */
230 #define	SDA_CMDF_WRITE		0x0002		/* transfer direction */
231 #define	SDA_CMDF_AUTO_CMD12	0x0004		/* cmd12 requested */
232 /* private flags .. not for driver consumption */
233 #define	SDA_CMDF_DAT		0x0100		/* data phase pending */
234 #define	SDA_CMDF_BUSY		0x0200		/* cmd in-flight or queued */
235 #define	SDA_CMDF_INIT		0x0400		/* initialization command */
236 #define	SDA_CMDF_MEM		0x0800		/* memory target command */
237 };
238 
239 /*
240  * The framework has two APIs.  The first API is for host controllers,
241  * and is referred to as SDHOST.  The second API is for target devices,
242  * and is referred to as SDCLIENT.  Please don't mix and match usage outside
243  * of the framework implementation itself!
244  */
245 
246 typedef struct sda_host sda_host_t;
247 
248 typedef enum {
249 	SDA_PROP_INSERTED = 	1,	/* R: is card inserted? */
250 	SDA_PROP_WPROTECT =	2,	/* R: is card write protected */
251 	SDA_PROP_LED =		3,	/* W: LED */
252 	SDA_PROP_CLOCK =	4,	/* R: frequency, Hz */
253 	SDA_PROP_BUSWIDTH =	5,	/* W: bus width */
254 	SDA_PROP_OCR =		6,	/* RW: ocr R: supported, W: set curr */
255 	SDA_PROP_CAP_4BITS =	7,	/* R: 4 bit data bus? */
256 	SDA_PROP_CAP_8BITS =	8,	/* R: MMC future expansion */
257 	SDA_PROP_CAP_HISPEED =	9,	/* R: fast bus rates (> 25MHz) */
258 	SDA_PROP_CAP_INTR =	10,	/* R: SDIO interrupt support */
259 	SDA_PROP_CAP_NOPIO =	11,	/* R: Never needs bp_mapin */
260 	SDA_PROP_HISPEED =	12	/* W: high speed (>25MHz) */
261 } sda_prop_t;
262 
263 typedef enum {
264 	SDA_FAULT_NONE =	0,	/* No failure */
265 	SDA_FAULT_ACMD12 =	1,	/* Auto CMD12 failure */
266 	SDA_FAULT_CRC7 =	2,	/* CRC7 failure on CMD/DAT line */
267 	SDA_FAULT_PROTO =	3,	/* SD/MMC protocol error */
268 	SDA_FAULT_CURRENT =	4,	/* Current overlimit detected */
269 	SDA_FAULT_INIT =	5,	/* Card initialization failure */
270 	SDA_FAULT_TIMEOUT =	6,	/* Unexpected timeout failure */
271 	SDA_FAULT_HOST =	7,	/* Internal host or slot failure */
272 	SDA_FAULT_RESET =	8,	/* Slot failed to reset */
273 } sda_fault_t;
274 
275 typedef enum {
276 	SDA_EOK =		0,	/* Success */
277 	SDA_ECRC7 =		1,	/* CRC7 failure */
278 	SDA_EPROTO =		2,	/* SD/MMC protocol error */
279 	SDA_EINVAL =		3,	/* Invalid argument */
280 	SDA_ETIME =		4,	/* Timeout */
281 	SDA_ECMD12 =		5,	/* Failed during stop cmd */
282 	SDA_ENOTSUP =		6,	/* Setting/property not supported */
283 	SDA_ERESID =		7,	/* Incomplete transfer */
284 	SDA_EFAULT =		8,	/* Previous fault condition present */
285 	SDA_ENOMEM =		9,	/* Memory exhausted */
286 	SDA_EWPROTECT =		10,	/* Media is write protected */
287 	SDA_ENODEV =		11,	/* Card removed */
288 	SDA_ERESET =		12,	/* Memory card reset */
289 	SDA_EABORT =		13,	/* Memory command aborted */
290 	SDA_EIO =		14,	/* Other generic error */
291 	SDA_ESUSPENDED =	15,	/* Slot has been suspended */
292 } sda_err_t;
293 
294 typedef struct sda_ops {
295 	int	so_version;
296 #define	SDA_OPS_VERSION	1
297 	sda_err_t	(*so_cmd)(void *, sda_cmd_t *);
298 	sda_err_t	(*so_getprop)(void *, sda_prop_t, uint32_t *);
299 	sda_err_t	(*so_setprop)(void *, sda_prop_t, uint32_t);
300 	sda_err_t	(*so_poll)(void *);
301 	sda_err_t	(*so_reset)(void *);
302 	sda_err_t	(*so_halt)(void *);
303 } sda_ops_t;
304 
305 /*
306  * Host operations.
307  */
308 void sda_host_init_ops(struct dev_ops *);
309 void sda_host_fini_ops(struct dev_ops *);
310 sda_host_t *sda_host_alloc(dev_info_t *, int, sda_ops_t *, ddi_dma_attr_t *);
311 void sda_host_free(sda_host_t *);
312 void sda_host_set_private(sda_host_t *, int, void *);
313 int sda_host_attach(sda_host_t *);
314 void sda_host_detach(sda_host_t *);
315 void sda_host_suspend(sda_host_t *);
316 void sda_host_resume(sda_host_t *);
317 void sda_host_detect(sda_host_t *, int);
318 void sda_host_fault(sda_host_t *, int, sda_fault_t);
319 void sda_host_transfer(sda_host_t *, int, sda_err_t);
320 /*PRINTFLIKE3*/
321 void sda_host_log(sda_host_t *, int, const char *, ...);
322 
323 #ifdef	__cplusplus
324 }
325 #endif
326 
327 #endif	/* _SYS_SDCARD_SDA_H */
328