1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * Copyright 2005 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _SYS_SCSI_SCSI_PKT_H 28 #define _SYS_SCSI_SCSI_PKT_H 29 30 #pragma ident "%Z%%M% %I% %E% SMI" 31 32 #include <sys/scsi/scsi_types.h> 33 34 #ifdef __cplusplus 35 extern "C" { 36 #endif 37 38 /* 39 * SCSI packet definition. 40 * 41 * This structure defines the packet which is allocated by a library 42 * function and handed to a target driver. The target driver fills 43 * in some information, and passes it to the library for transport 44 * to an addressed SCSI device. The host adapter found by 45 * the library fills in some other information as the command is 46 * processed. When the command completes (or can be taken no further) 47 * the function specified in the packet is called with a pointer to 48 * the packet as it argument. From fields within the packet, the target 49 * driver can determine the success or failure of the command. 50 */ 51 struct scsi_pkt { 52 opaque_t pkt_ha_private; /* private data for host adapter */ 53 struct scsi_address pkt_address; /* destination packet is for */ 54 opaque_t pkt_private; /* private data for target driver */ 55 void (*pkt_comp)(struct scsi_pkt *); /* completion routine */ 56 uint_t pkt_flags; /* flags */ 57 int pkt_time; /* time allotted to complete command */ 58 uchar_t *pkt_scbp; /* pointer to status block */ 59 uchar_t *pkt_cdbp; /* pointer to command block */ 60 ssize_t pkt_resid; /* data bytes not transferred */ 61 uint_t pkt_state; /* state of command */ 62 uint_t pkt_statistics; /* statistics */ 63 uchar_t pkt_reason; /* reason completion called */ 64 }; 65 66 /* 67 * Definitions for the pkt_flags field. 68 */ 69 70 /* 71 * Following defines are generic. 72 */ 73 #define FLAG_STAG 0x4000 /* Run command with Simple attribute */ 74 #define FLAG_OTAG 0x2000 /* Run command with Ordered attribute */ 75 #define FLAG_HTAG 0x1000 /* Run command with Head of Queue attribute */ 76 #define FLAG_TAGMASK (FLAG_HTAG|FLAG_OTAG|FLAG_STAG) 77 78 #define FLAG_ACA 0x0100 /* Run command with ACA attribute */ 79 #define FLAG_HEAD 0x8000 /* This cmd should be put at the head */ 80 /* of the HBA driver's queue */ 81 #define FLAG_SENSING 0x0400 /* Running request sense for failed pkt */ 82 #define FLAG_NOINTR 0x0001 /* Run command with no cmd completion */ 83 /* callback; command has been completed */ 84 /* upon return from scsi_transport(9F) */ 85 86 /* 87 * Following defines are appropriate for SCSI parallel bus. 88 */ 89 #define FLAG_NODISCON 0x0002 /* Run command without disconnects */ 90 #define FLAG_NOPARITY 0x0008 /* Run command without parity checking */ 91 #define FLAG_RENEGOTIATE_WIDE_SYNC \ 92 0x1000000 /* Do wide and sync renegotiation before */ 93 /* transporting this command to target */ 94 95 /* 96 * Following defines are internal i.e. not part of DDI. 97 */ 98 #define FLAG_SUBLUN 0x0004 /* Use the sublun field in pkt_address */ 99 #define FLAG_QUEHOLD 0x0200 /* Don't advance HA que until cmd completes */ 100 #define FLAG_IMMEDIATE_CB \ 101 0x0800 /* Immediate callback on command */ 102 /* completion, ie. do not defer */ 103 104 105 /* 106 * Following defines are for USCSI options. 107 */ 108 #define FLAG_SILENT 0x00010000 109 #define FLAG_DIAGNOSE 0x00020000 110 #define FLAG_ISOLATE 0x00040000 111 112 /* 113 * Following define is for scsi_vhci. 114 * If pHCI cannot transport the command to the device, do not queue the pkt 115 * in pHCI. Return immediately with TRAN_BUSY. 116 */ 117 #define FLAG_NOQUEUE 0x80000000 118 119 120 /* 121 * Definitions for the pkt_reason field. 122 */ 123 124 /* 125 * Following defines are generic. 126 */ 127 #define CMD_CMPLT 0 /* no transport errors- normal completion */ 128 #define CMD_INCOMPLETE 1 /* transport stopped with not normal state */ 129 #define CMD_DMA_DERR 2 /* dma direction error occurred */ 130 #define CMD_TRAN_ERR 3 /* unspecified transport error */ 131 #define CMD_RESET 4 /* Target completed hard reset sequence */ 132 #define CMD_ABORTED 5 /* Command transport aborted on request */ 133 #define CMD_TIMEOUT 6 /* Command timed out */ 134 #define CMD_DATA_OVR 7 /* Data Overrun */ 135 #define CMD_CMD_OVR 8 /* Command Overrun */ 136 #define CMD_STS_OVR 9 /* Status Overrun */ 137 #define CMD_TERMINATED 22 /* Command transport terminated on request */ 138 139 /* 140 * Following defines are appropriate for SCSI parallel bus. 141 */ 142 #define CMD_BADMSG 10 /* Message not Command Complete */ 143 #define CMD_NOMSGOUT 11 /* Target refused to go to Message Out phase */ 144 #define CMD_XID_FAIL 12 /* Extended Identify message rejected */ 145 #define CMD_IDE_FAIL 13 /* Initiator Detected Error message rejected */ 146 #define CMD_ABORT_FAIL 14 /* Abort message rejected */ 147 #define CMD_REJECT_FAIL 15 /* Reject message rejected */ 148 #define CMD_NOP_FAIL 16 /* No Operation message rejected */ 149 #define CMD_PER_FAIL 17 /* Message Parity Error message rejected */ 150 #define CMD_BDR_FAIL 18 /* Bus Device Reset message rejected */ 151 #define CMD_ID_FAIL 19 /* Identify message rejected */ 152 #define CMD_UNX_BUS_FREE 20 /* Unexpected Bus Free Phase occurred */ 153 #define CMD_TAG_REJECT 21 /* Target rejected our tag message */ 154 #define CMD_DEV_GONE 24 /* The device has been removed */ 155 156 /* Used by scsi_rname(9F) */ 157 #define CMD_REASON_ASCII { \ 158 "cmplt", "incomplete", "dma_derr", "tran_err", "reset", \ 159 "aborted", "timeout", "data_ovr", "cmd_ovr", "sts_ovr", \ 160 "badmsg", "nomsgout", "xid_fail", "ide_fail", "abort_fail", \ 161 "reject_fail", "nop_fail", "per_fail", "bdr_fail", "id_fail", \ 162 "unexpected_bus_free", "tag reject", "terminated", "", "gone", \ 163 NULL } 164 165 /* 166 * Definitions for the pkt_state field 167 */ 168 #define STATE_GOT_BUS 0x01 /* Success in getting SCSI bus */ 169 #define STATE_GOT_TARGET 0x02 /* Successfully connected with target */ 170 #define STATE_SENT_CMD 0x04 /* Command successfully sent */ 171 #define STATE_XFERRED_DATA 0x08 /* Data transfer took place */ 172 #define STATE_GOT_STATUS 0x10 /* SCSI status received */ 173 #define STATE_ARQ_DONE 0x20 /* auto rqsense took place */ 174 175 /* 176 * Definitions for the pkt_statistics field 177 */ 178 179 /* 180 * Following defines are generic. 181 */ 182 #define STAT_BUS_RESET 0x8 /* Reset operation on interconnect */ 183 #define STAT_DEV_RESET 0x10 /* Target completed hard reset sequence */ 184 #define STAT_ABORTED 0x20 /* Command was aborted */ 185 #define STAT_TERMINATED 0x80 /* Command was terminated */ 186 #define STAT_TIMEOUT 0x40 /* Command experienced a timeout */ 187 188 /* 189 * Following defines are appropriate for SCSI parallel bus. 190 */ 191 #define STAT_DISCON 0x1 /* Command experienced a disconnect */ 192 #define STAT_SYNC 0x2 /* Command did a synchronous data transfer */ 193 #define STAT_PERR 0x4 /* Command experienced a SCSI parity error */ 194 195 /* 196 * Definitions for what scsi_transport returns 197 */ 198 #define TRAN_ACCEPT 1 199 #define TRAN_BUSY 0 200 #define TRAN_BADPKT -1 201 #define TRAN_FATAL_ERROR -2 /* HBA cannot accept any pkts */ 202 203 #ifdef _KERNEL 204 /* 205 * Kernel function declarations 206 */ 207 int scsi_transport(struct scsi_pkt *pkt); 208 209 #define pkt_transport scsi_transport 210 211 #define SCSI_POLL_TIMEOUT 60 212 213 #endif /* _KERNEL */ 214 215 #ifdef __cplusplus 216 } 217 #endif 218 219 #endif /* _SYS_SCSI_SCSI_PKT_H */ 220