1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_SCSI_SCSI_ADDRESS_H 27 #define _SYS_SCSI_SCSI_ADDRESS_H 28 29 #include <sys/scsi/scsi_types.h> 30 31 #ifdef __cplusplus 32 extern "C" { 33 #endif 34 35 /* 36 * SCSI address definition. 37 * 38 * A scsi_address(9S) structure stores the host adapter routing and 39 * scsi_device(9S) unit-address routing information necessary to reference 40 * a specific SCSI target device logical unit function. 41 * 42 * Host adapter routing information is stored in the scsi_hba_tran(9S) 43 * structure, pointed to by the scsi_address(9S) 'a_hba_tran' field. 44 * 45 * The scsi_device(9S) unit-address routing information (i.e. SCSA's 46 * representation of leaf disk/tape driver's "@unit-address" portion of 47 * a /devices path) is maintained in three different forms: 48 * 49 * SCSI_HBA_ADDR_SPI: In SCSI_HBA_ADDR_SPI mode (default), the SCSA 50 * framework, during initialization, places unit-address property 51 * information, converted to numeric form, directly into the 52 * 'a_target' and 'a_lun' fields of the scsi_address(9S) structure 53 * (embedded in the scsi_device(9S) structure). To maintain 54 * per-scsi_device(9S) state, host adapter drivers often use 55 * 'a_target' and 'a_lun' to index into a large fixed array 56 * (limited by the drivers idea of maximum supported target and 57 * lun). 58 * 59 * NOTE: a_sublun is reserved for internal use only and has never 60 * been part of DDI scsi_address(9S). 61 * 62 * SCSI_HBA_ADDR_COMPLEX: The host adapter driver will maintain 63 * per-unit-address/per-scsi_device(9S) HBA private state by using 64 * scsi_device_hba_private_set(9F) during tran_tgt_init(9E) (using 65 * property interfaces to obtain/convert unit-address information into 66 * a host adapter private form). In SCSI_HBA_ADDR_COMPLEX mode, the SCSA 67 * framework, prior to tran_tgt_init(9E), places a pointer to the 68 * scsi_device(9S) in the 'a.a_sd' scsi_address(9S) field, and uses 69 * 'sd_hba_private' to store per-scsi_device hba private data. 70 * 71 * SCSI_HBA_TRAN_CLONE: SCSI_HBA_TRAN_CLONE is an older method for 72 * supporting devices with non-SPI unit-address. It is still 73 * supported, but its use is discouraged. From a unit-address 74 * perspective, operation is similar to SCSI_HBA_ADDR_COMPLEX, but 75 * per-scsi_device(9S) state is supported via 'cloning' of the 76 * scsi_hba_tran(9S) structure (to provide a per-scsi_device(9S) 77 * version of 'tran_tgt_private'/'tran_sd' accessible via 78 * 'a_hba_tran'). 79 * 80 * NOTE: Compatible evolution of SCSA is constrained by the fact that the 81 * scsi_address(9S) structure is embedded at the base of the scsi_device(9S) 82 * structure, and is structure copied into the base of each allocated 83 * scsi_pkt(9S) structure. 84 * 85 * In general, device unit-address information is used exclusively by 86 * the host adapter driver (the exception being target drivers 87 * communicating with SCSI Parallel Interconnect (SPI) SCSI-1 devices 88 * that embed SCSI logical unit addressing in the CDB). Target drivers 89 * which need to communicate with SPI SCSI-1 devices that embed logical 90 * unit addresses in the CDB must obtain target and logical unit 91 * addresses from the device's properties (SCSI_ADDR_PROP_TARGET and 92 * SCSI_ADDR_PROP_LUN). 93 */ 94 struct scsi_address { 95 struct scsi_hba_tran *a_hba_tran; /* Transport vector */ 96 union { 97 struct { /* SPI: */ 98 ushort_t a_target; /* ua target */ 99 uchar_t a_lun; /* ua lun on target */ 100 uchar_t _a_sublun; /* (private) */ 101 } spi; 102 struct scsi_device *a_sd; /* COMPLEX: (private) */ 103 } a; /* device unit-adddress info */ 104 }; 105 #define a_target a.spi.a_target 106 #define a_lun a.spi.a_lun 107 #define a_sublun a.spi._a_sublun 108 109 /* Device unit-address property names */ 110 #define SCSI_ADDR_PROP_TARGET "target" /* int */ 111 #define SCSI_ADDR_PROP_LUN "lun" /* int */ 112 113 #define SCSI_ADDR_PROP_TARGET_PORT "target-port" /* string */ 114 #define SCSI_ADDR_PROP_LUN64 "lun64" /* int64 */ 115 #define SCSI_ADDR_PROP_SFUNC "sfunc" /* int */ 116 117 /* 118 * Addressing property names, values are in string form compatible 119 * with the SCSI_ADDR_PROP_TARGET_PORT part of the related 120 * IEEE-1275 OpenFirmware binding unit-address string. 121 */ 122 #define SCSI_ADDR_PROP_INITIATOR_PORT "initiator-port" 123 #define SCSI_ADDR_PROP_ATTACHED_PORT "attached-port" 124 #define SCSI_ADDR_PROP_BRIDGE_PORT "bridge-port" 125 126 /* 127 * Normalized representation of a scsi_lun (with SCSI-2 lun positioned 128 * for compatibility). 129 */ 130 typedef uint64_t scsi_lun64_t; 131 #define PRIlun64 PRIx64 132 #ifdef _LP64 133 #define SCSI_LUN64_ILLEGAL (-1L) 134 #else /* _LP64 */ 135 #define SCSI_LUN64_ILLEGAL (-1LL) 136 #endif /* _LP64 */ 137 138 /* Structure of a 64-bit SCSI LUN per SCSI standard */ 139 typedef struct scsi_lun { 140 uchar_t sl_lun1_msb; /* format */ 141 uchar_t sl_lun1_lsb; /* first level */ 142 uchar_t sl_lun2_msb; 143 uchar_t sl_lun2_lsb; /* second level */ 144 uchar_t sl_lun3_msb; 145 uchar_t sl_lun3_lsb; /* third level */ 146 uchar_t sl_lun4_msb; 147 uchar_t sl_lun4_lsb; /* fourth level */ 148 } scsi_lun_t; 149 150 #ifdef __cplusplus 151 } 152 #endif 153 154 #endif /* _SYS_SCSI_SCSI_ADDRESS_H */ 155