1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (c) 1990, 2010, Oracle and/or its affiliates. All rights reserved. 23 * Copyright 2014 Garrett D'Amore <garrett@damore.org> 24 */ 25 26 #ifndef _SYS_SCSI_IMPL_TRANSPORT_H 27 #define _SYS_SCSI_IMPL_TRANSPORT_H 28 29 /* 30 * Include the loadable module wrapper. 31 */ 32 #include <sys/modctl.h> 33 #include <sys/note.h> 34 35 #ifdef __cplusplus 36 extern "C" { 37 #endif 38 39 #ifdef _KERNEL 40 41 /* 42 * Opaque handles to address maps 43 */ 44 typedef struct __scsi_iportmap scsi_hba_iportmap_t; 45 typedef struct __scsi_tgtmap scsi_hba_tgtmap_t; 46 47 /* 48 * SCSI transport structures 49 * 50 * As each Host Adapter makes itself known to the system, 51 * it will create and register with the library the structure 52 * described below. This is so that the library knows how to route 53 * packets, resource control requests, and capability requests 54 * for any particular host adapter. The 'a_hba_tran' field of a 55 * scsi_address structure made known to a Target driver will 56 * point to one of these transport structures. 57 */ 58 59 typedef struct scsi_hba_tran scsi_hba_tran_t; 60 61 struct scsi_hba_tran { 62 /* 63 * Ptr to the device info structure for this particular HBA. If a SCSA 64 * HBA driver separates initiator port function from HBA function, 65 * this field still refers to the HBA and is used to manage DMA. 66 */ 67 dev_info_t *tran_hba_dip; 68 69 /* 70 * Private fields for use by the HBA itself. 71 */ 72 void *tran_hba_private; /* HBA softstate */ 73 74 /* 75 * The following two fields are only used in the deprecated 76 * SCSI_HBA_TRAN_CLONE case. Use SCSI_HBA_ADDR_COMPLEX instead. 77 */ 78 void *tran_tgt_private; 79 struct scsi_device *tran_sd; 80 81 /* 82 * Vectors to point to specific HBA entry points 83 */ 84 int (*tran_tgt_init)( 85 dev_info_t *hba_dip, 86 dev_info_t *tgt_dip, 87 scsi_hba_tran_t *tran, 88 struct scsi_device *sd); 89 90 int (*tran_tgt_probe)( 91 struct scsi_device *sd, 92 int (*callback)( 93 void)); 94 void (*tran_tgt_free)( 95 dev_info_t *hba_dip, 96 dev_info_t *tgt_dip, 97 scsi_hba_tran_t *tran, 98 struct scsi_device *sd); 99 100 int (*tran_start)( 101 struct scsi_address *ap, 102 struct scsi_pkt *pkt); 103 104 int (*tran_reset)( 105 struct scsi_address *ap, 106 int level); 107 108 int (*tran_abort)( 109 struct scsi_address *ap, 110 struct scsi_pkt *pkt); 111 112 int (*tran_getcap)( 113 struct scsi_address *ap, 114 char *cap, 115 int whom); 116 117 int (*tran_setcap)( 118 struct scsi_address *ap, 119 char *cap, 120 int value, 121 int whom); 122 123 struct scsi_pkt *(*tran_init_pkt)( 124 struct scsi_address *ap, 125 struct scsi_pkt *pkt, 126 struct buf *bp, 127 int cmdlen, 128 int statuslen, 129 int tgtlen, 130 int flags, 131 int (*callback)( 132 caddr_t arg), 133 caddr_t callback_arg); 134 135 void (*tran_destroy_pkt)( 136 struct scsi_address *ap, 137 struct scsi_pkt *pkt); 138 139 void (*tran_dmafree)( 140 struct scsi_address *ap, 141 struct scsi_pkt *pkt); 142 143 void (*tran_sync_pkt)( 144 struct scsi_address *ap, 145 struct scsi_pkt *pkt); 146 147 int (*tran_reset_notify)( 148 struct scsi_address *ap, 149 int flag, 150 void (*callback)(caddr_t), 151 caddr_t arg); 152 153 int (*tran_get_bus_addr)( 154 struct scsi_device *sd, 155 char *name, 156 int len); 157 158 int (*tran_get_name)( 159 struct scsi_device *sd, 160 char *name, 161 int len); 162 163 int (*tran_clear_aca)( 164 struct scsi_address *ap); 165 166 int (*tran_clear_task_set)( 167 struct scsi_address *ap); 168 169 int (*tran_terminate_task)( 170 struct scsi_address *ap, 171 struct scsi_pkt *pkt); 172 173 int (*tran_get_eventcookie)( 174 dev_info_t *hba_dip, 175 dev_info_t *tgt_dip, 176 char *name, 177 ddi_eventcookie_t *eventp); 178 179 int (*tran_add_eventcall)( 180 dev_info_t *hba_dip, 181 dev_info_t *tgt_dip, 182 ddi_eventcookie_t event, 183 void (*callback)( 184 dev_info_t *tgt_dip, 185 ddi_eventcookie_t event, 186 void *arg, 187 void *bus_impldata), 188 void *arg, 189 ddi_callback_id_t *cb_id); 190 191 int (*tran_remove_eventcall)(dev_info_t *devi, 192 ddi_callback_id_t cb_id); 193 194 int (*tran_post_event)( 195 dev_info_t *hba_dip, 196 dev_info_t *tgt_dip, 197 ddi_eventcookie_t event, 198 void *bus_impldata); 199 200 int (*tran_quiesce)( 201 dev_info_t *hba_dip); 202 203 int (*tran_unquiesce)( 204 dev_info_t *hba_dip); 205 206 int (*tran_bus_reset)( 207 dev_info_t *hba_dip, 208 int level); 209 210 /* 211 * Implementation-private specifics. 212 * No HBA should refer to any of the fields below. 213 * This information can and will change. 214 */ 215 int tran_hba_flags; /* flag options */ 216 217 uint_t tran_obs1; 218 uchar_t tran_obs2; 219 uchar_t tran_obs3; 220 221 /* 222 * open_lock: protect tran_minor_isopen 223 * open_flag: bit field indicating which minor nodes are open. 224 * 0 = closed, 1 = shared open, all bits 1 = excl open. 225 * 226 * NOTE: Unused if HBA driver implements its own open(9e) entry point. 227 */ 228 kmutex_t tran_open_lock; 229 uint64_t tran_open_flag; 230 231 /* 232 * bus_config vectors - ON Consolidation Private 233 * These interfaces are subject to change. 234 */ 235 int (*tran_bus_config)( 236 dev_info_t *hba_dip, 237 uint_t flag, 238 ddi_bus_config_op_t op, 239 void *arg, 240 dev_info_t **tgt_dipp); 241 242 int (*tran_bus_unconfig)( 243 dev_info_t *hba_dip, 244 uint_t flag, 245 ddi_bus_config_op_t op, 246 void *arg); 247 248 int (*tran_bus_power)( 249 dev_info_t *dip, 250 void *impl_arg, 251 pm_bus_power_op_t op, 252 void *arg, 253 void *result); 254 255 /* 256 * Inter-Connect type of transport as defined in 257 * usr/src/uts/common/sys/scsi/impl/services.h 258 */ 259 int tran_interconnect_type; 260 261 /* tran_setup_pkt(9E) related scsi_pkt fields */ 262 int (*tran_pkt_constructor)( 263 struct scsi_pkt *pkt, 264 scsi_hba_tran_t *tran, 265 int kmflag); 266 void (*tran_pkt_destructor)( 267 struct scsi_pkt *pkt, 268 scsi_hba_tran_t *tran); 269 kmem_cache_t *tran_pkt_cache_ptr; 270 uint_t tran_hba_len; 271 int (*tran_setup_pkt)( 272 struct scsi_pkt *pkt, 273 int (*callback)( 274 caddr_t arg), 275 caddr_t callback_arg); 276 void (*tran_teardown_pkt)( 277 struct scsi_pkt *pkt); 278 ddi_dma_attr_t tran_dma_attr; 279 280 void *tran_extension; 281 282 /* 283 * An fm_capable HBA driver can set tran_fm_capable prior to 284 * scsi_hba_attach_setup(). If not set, SCSA provides a default 285 * implementation. 286 */ 287 int tran_fm_capable; 288 289 /* 290 * Ptr to the device info structure for initiator port. If a SCSA HBA 291 * driver separates initiator port function from HBA function, this 292 * field still refers to the initiator port. 293 */ 294 dev_info_t *tran_iport_dip; 295 296 /* 297 * map of initiator ports below HBA 298 */ 299 scsi_hba_iportmap_t *tran_iportmap; 300 301 /* 302 * map of targets below initiator 303 */ 304 scsi_hba_tgtmap_t *tran_tgtmap; 305 306 #ifdef SCSI_SIZE_CLEAN_VERIFY 307 /* 308 * Must be last: Building a driver with-and-without 309 * -DSCSI_SIZE_CLEAN_VERIFY, and checking driver modules for 310 * differences with a tools like 'wsdiff' allows a developer to verify 311 * that their driver has no dependencies on scsi*(9S) size. 312 */ 313 int _pad[8]; 314 #endif /* SCSI_SIZE_CLEAN_VERIFY */ 315 }; 316 size_t scsi_hba_tran_size(); /* private */ 317 318 #ifdef __lock_lint 319 _NOTE(SCHEME_PROTECTS_DATA("stable data", 320 scsi_hba_tran::tran_sd 321 scsi_hba_tran::tran_hba_dip 322 scsi_hba_tran::tran_hba_flags 323 scsi_hba_tran::tran_open_flag 324 scsi_hba_tran::tran_pkt_cache_ptr)) 325 /* 326 * we only modify the dma attributes (like dma_attr_granular) upon 327 * attach and in response to a setcap. It is also up to the target 328 * driver to not have any outstanding I/Os when it is changing the 329 * capabilities of the transport. 330 */ 331 _NOTE(SCHEME_PROTECTS_DATA("serialized by target driver", \ 332 scsi_hba_tran::tran_dma_attr.dma_attr_granular)) 333 #endif 334 335 /* 336 * Prototypes for SCSI HBA interface functions 337 * 338 * All these functions are public interfaces, with the 339 * exception of: 340 * interface called by 341 * scsi_initialize_hba_interface() _init() of scsi module 342 * scsi_uninitialize_hba_interface() _fini() of scsi module 343 */ 344 345 void scsi_initialize_hba_interface(void); 346 347 #ifdef NO_SCSI_FINI_YET 348 void scsi_uninitialize_hba_interface(void); 349 #endif /* NO_SCSI_FINI_YET */ 350 351 int scsi_hba_init( 352 struct modlinkage *modlp); 353 354 void scsi_hba_fini( 355 struct modlinkage *modlp); 356 357 int scsi_hba_attach_setup( 358 dev_info_t *hba_dip, 359 ddi_dma_attr_t *hba_dma_attr, 360 scsi_hba_tran_t *tran, 361 int flags); 362 363 int scsi_hba_detach( 364 dev_info_t *hba_dip); 365 366 scsi_hba_tran_t *scsi_hba_tran_alloc( 367 dev_info_t *hba_dip, 368 int flags); 369 370 int scsi_tran_ext_alloc( 371 scsi_hba_tran_t *tran, 372 size_t length, 373 int flags); 374 375 void scsi_tran_ext_free( 376 scsi_hba_tran_t *tran, 377 size_t length); 378 379 void scsi_hba_tran_free( 380 scsi_hba_tran_t *tran); 381 382 int scsi_hba_probe( 383 struct scsi_device *sd, 384 int (*callback)(void)); 385 386 int scsi_hba_probe_pi( 387 struct scsi_device *sd, 388 int (*callback)(void), 389 int pi); 390 391 int scsi_hba_ua_get_reportdev( 392 struct scsi_device *sd, 393 char *ba, 394 int len); 395 396 int scsi_hba_ua_get( 397 struct scsi_device *sd, 398 char *ua, 399 int len); 400 401 char *scsi_get_device_type_string( 402 char *prop_name, 403 dev_info_t *hba_dip, 404 struct scsi_device *sd); 405 406 int scsi_get_scsi_maxluns( 407 struct scsi_device *sd); 408 409 int scsi_get_scsi_options( 410 struct scsi_device *sd, 411 int default_scsi_options); 412 413 int scsi_get_device_type_scsi_options( 414 dev_info_t *hba_dip, 415 struct scsi_device *sd, 416 int default_scsi_options); 417 418 struct scsi_pkt *scsi_hba_pkt_alloc( 419 dev_info_t *hba_dip, 420 struct scsi_address *ap, 421 int cmdlen, 422 int statuslen, 423 int tgtlen, 424 int hbalen, 425 int (*callback)(caddr_t), 426 caddr_t arg); 427 428 void scsi_hba_pkt_free( 429 struct scsi_address *ap, 430 struct scsi_pkt *pkt); 431 432 433 int scsi_hba_lookup_capstr( 434 char *capstr); 435 436 int scsi_hba_in_panic(void); 437 438 int scsi_hba_open( 439 dev_t *devp, 440 int flags, 441 int otyp, 442 cred_t *credp); 443 444 int scsi_hba_close( 445 dev_t dev, 446 int flag, 447 int otyp, 448 cred_t *credp); 449 450 int scsi_hba_ioctl( 451 dev_t dev, 452 int cmd, 453 intptr_t arg, 454 int mode, 455 cred_t *credp, 456 int *rvalp); 457 458 void scsi_hba_nodename_compatible_get( 459 struct scsi_inquiry *inq, 460 char *binding_set, 461 int dtype_node, 462 char *compat0, 463 char **nodenamep, 464 char ***compatiblep, 465 int *ncompatiblep); 466 467 void scsi_hba_nodename_compatible_free( 468 char *nodename, 469 char **compatible); 470 471 int scsi_device_prop_update_inqstring( 472 struct scsi_device *sd, 473 char *name, 474 char *data, 475 size_t len); 476 477 void scsi_hba_pkt_comp( 478 struct scsi_pkt *pkt); 479 480 int scsi_device_identity( 481 struct scsi_device *sd, 482 int (*callback)(void)); 483 484 char *scsi_hba_iport_unit_address( 485 dev_info_t *dip); 486 487 int scsi_hba_iport_register( 488 dev_info_t *dip, 489 char *port); 490 491 int scsi_hba_iport_exist( 492 dev_info_t *dip); 493 494 dev_info_t *scsi_hba_iport_find( 495 dev_info_t *pdip, 496 char *portnm); 497 498 499 /* 500 * Flags for scsi_hba_attach 501 * 502 * SCSI_HBA_ADDR_SPI The host adapter driver wants the 503 * scsi_address(9S) structure to be maintained 504 * in legacy SPI 'a_target'/'a_lun' form (default). 505 * 506 * SCSI_HBA_ADDR_COMPLEX The host adapter has a complex unit-address 507 * space, and the HBA driver wants to maintain 508 * per-scsi_device(9S) HBA private data using 509 * scsi_address_device(9F) and 510 * scsi_device_hba_private_[gs]et(9F). The HBA 511 * driver must maintain a private representation 512 * of the scsi_device(9S) unit-address - typically 513 * established during tran_tgt_init(9F) based on 514 * property values. 515 * 516 * SCSI_HBA_TRAN_PHCI The host adapter is an mpxio/scsi_vhci pHCI. 517 * The framework should take care of 518 * mdi_phci_register() stuff. 519 * 520 * SCSI_HBA_HBA The host adapter node (associated with a PCI 521 * function) is just an HBA, all SCSI initiator 522 * port function is provided by separate 'iport' 523 * children of the host adapter node. These iport 524 * children bind to the same driver as the host 525 * adapter node. Both nodes are managed by the 526 * same driver. The driver can distinguish context 527 * by calling scsi_hba_iport_unit_address(). 528 * 529 * ::SCSI_HBA_TRAN_CLONE Deprecated: use SCSI_HBA_ADDR_COMPLEX instead. 530 * SCSI_HBA_TRAN_CLONE was a KLUDGE to address 531 * limitations of the scsi_address(9S) structure 532 * via duplication of scsi_hba_tran(9S) and 533 * use of tran_tgt_private. 534 * 535 */ 536 #define SCSI_HBA_TRAN_CLONE 0x01 /* Deprecated */ 537 #define SCSI_HBA_TRAN_PHCI 0x02 /* treat HBA as mpxio 'pHCI' */ 538 #define SCSI_HBA_TRAN_CDB 0x04 /* allocate cdb */ 539 #define SCSI_HBA_TRAN_SCB 0x08 /* allocate sense */ 540 #define SCSI_HBA_HBA 0x10 /* all HBA children are iports */ 541 542 #define SCSI_HBA_ADDR_SPI 0x20 /* scsi_address in SPI form */ 543 #define SCSI_HBA_ADDR_COMPLEX 0x40 /* scsi_address is COMPLEX */ 544 545 /* upper bits used to record SCSA configuration state */ 546 #define SCSI_HBA_SCSA_PHCI 0x10000 /* need mdi_phci_unregister */ 547 #define SCSI_HBA_SCSA_TA 0x20000 /* scsi_hba_tran_alloc used */ 548 #define SCSI_HBA_SCSA_FM 0x40000 /* using common ddi_fm_* */ 549 550 /* 551 * Flags for scsi_hba allocation functions 552 */ 553 #define SCSI_HBA_CANSLEEP 0x01 /* can sleep */ 554 555 /* 556 * Support extra flavors for SCSA children 557 */ 558 #define SCSA_FLAVOR_SCSI_DEVICE NDI_FLAVOR_VANILLA 559 #define SCSA_FLAVOR_SMP 1 560 #define SCSA_FLAVOR_IPORT 2 561 #define SCSA_NFLAVORS 3 562 563 /* 564 * Maximum number of iport nodes under PCI function 565 */ 566 #define SCSI_HBA_MAX_IPORTS 32 567 568 /* 569 * SCSI iport map interfaces 570 */ 571 int scsi_hba_iportmap_create( 572 dev_info_t *hba_dip, 573 int csync_usec, 574 int stable_usec, 575 scsi_hba_iportmap_t **iportmapp); 576 577 int scsi_hba_iportmap_iport_add( 578 scsi_hba_iportmap_t *iportmap, 579 char *iport_addr, 580 void *iport_priv); 581 582 int scsi_hba_iportmap_iport_remove( 583 scsi_hba_iportmap_t *iportmap, 584 char *iport_addr); 585 586 void scsi_hba_iportmap_destroy(scsi_hba_iportmap_t *iportmap); 587 588 /* 589 * SCSI target map interfaces 590 */ 591 typedef enum { 592 SCSI_TM_FULLSET = 0, 593 SCSI_TM_PERADDR 594 } scsi_tgtmap_mode_t; 595 596 typedef enum { 597 SCSI_TGT_SCSI_DEVICE = 0, 598 SCSI_TGT_SMP_DEVICE, 599 SCSI_TGT_NTYPES 600 } scsi_tgtmap_tgt_type_t; 601 602 typedef enum { 603 SCSI_TGT_DEACT_RSN_GONE = 0, 604 SCSI_TGT_DEACT_RSN_CFG_FAIL, 605 SCSI_TGT_DEACT_RSN_UNSTBL 606 } scsi_tgtmap_deact_rsn_t; 607 608 typedef void (*scsi_tgt_activate_cb_t)( 609 void *tgtmap_priv, 610 char *tgt_addr, 611 scsi_tgtmap_tgt_type_t tgt_type, 612 void **tgt_privp); 613 typedef boolean_t (*scsi_tgt_deactivate_cb_t)( 614 void *tgtmap_priv, 615 char *tgt_addr, 616 scsi_tgtmap_tgt_type_t tgt_type, 617 void *tgt_priv, 618 scsi_tgtmap_deact_rsn_t tgt_deact_rsn); 619 int scsi_hba_tgtmap_create( 620 dev_info_t *iport_dip, 621 scsi_tgtmap_mode_t rpt_mode, 622 int csync_usec, 623 int stable_usec, 624 void *tgtmap_priv, 625 scsi_tgt_activate_cb_t activate_cb, 626 scsi_tgt_deactivate_cb_t deactivate_cb, 627 scsi_hba_tgtmap_t **tgtmapp); 628 629 int scsi_hba_tgtmap_set_begin(scsi_hba_tgtmap_t *tgtmap); 630 631 int scsi_hba_tgtmap_set_add( 632 scsi_hba_tgtmap_t *tgtmap, 633 scsi_tgtmap_tgt_type_t tgt_type, 634 char *tgt_addr, 635 void *tgt_priv); 636 637 int scsi_hba_tgtmap_set_end( 638 scsi_hba_tgtmap_t *tgtmap, 639 uint_t flags); 640 641 int scsi_hba_tgtmap_set_flush(scsi_hba_tgtmap_t *tgtmap); 642 643 int scsi_hba_tgtmap_tgt_add( 644 scsi_hba_tgtmap_t *tgtmap, 645 scsi_tgtmap_tgt_type_t tgt_type, 646 char *tgt_addr, 647 void *tgt_priv); 648 649 int scsi_hba_tgtmap_tgt_remove( 650 scsi_hba_tgtmap_t *tgtmap, 651 scsi_tgtmap_tgt_type_t tgt_type, 652 char *tgt_addr); 653 654 void scsi_hba_tgtmap_destroy(scsi_hba_tgtmap_t *tgt_map); 655 656 657 /* 658 * For minor nodes created by the SCSA framework, minor numbers are 659 * formed by left-shifting instance by INST_MINOR_SHIFT and OR in a 660 * number less than 64. 661 * 662 * - Numbers 0 - 31 are reserved by the framework, part of the range are 663 * in use, as defined below. 664 * 665 * - Numbers 32 - 63 are available for HBA driver use. 666 */ 667 #define INST_MINOR_SHIFT 6 668 #define TRAN_MINOR_MASK ((1 << INST_MINOR_SHIFT) - 1) 669 #define TRAN_OPEN_EXCL (uint64_t)-1 670 671 #define DEVCTL_MINOR 0 672 #define SCSI_MINOR 1 673 674 #define INST2DEVCTL(x) (((x) << INST_MINOR_SHIFT) | DEVCTL_MINOR) 675 #define INST2SCSI(x) (((x) << INST_MINOR_SHIFT) | SCSI_MINOR) 676 #define MINOR2INST(x) ((x) >> INST_MINOR_SHIFT) 677 678 #define SCSI_HBA_PROP_RECEPTACLE_LABEL "receptacle-label" 679 680 #endif /* _KERNEL */ 681 682 #ifdef __cplusplus 683 } 684 #endif 685 686 #endif /* _SYS_SCSI_IMPL_TRANSPORT_H */ 687