1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 1990, 2010, Oracle and/or its affiliates. All rights reserved. 24 */ 25 26 #ifndef _SYS_SCSI_GENERIC_COMMANDS_H 27 #define _SYS_SCSI_GENERIC_COMMANDS_H 28 29 #ifdef __cplusplus 30 extern "C" { 31 #endif 32 33 /* 34 * Standard SCSI Command Definitions 35 * 36 * Macros to determine known command sizes 37 */ 38 #define CDB_GROUPID(cmd) ((cmd >> 5) & 0x7) 39 #define CDB_GROUPID_0 0 40 #define CDB_GROUPID_1 1 41 #define CDB_GROUPID_2 2 42 #define CDB_GROUPID_3 3 43 #define CDB_GROUPID_4 4 44 #define CDB_GROUPID_5 5 45 #define CDB_GROUPID_6 6 46 #define CDB_GROUPID_7 7 47 48 #define CDB_GROUP0 6 /* 6-byte cdb's */ 49 #define CDB_GROUP1 10 /* 10-byte cdb's */ 50 #define CDB_GROUP2 10 /* 10-byte cdb's */ 51 #define CDB_GROUP3 0 /* reserved */ 52 #define CDB_GROUP4 16 /* 16-byte cdb's */ 53 #define CDB_GROUP5 12 /* 12-byte cdb's */ 54 #define CDB_GROUP6 0 /* reserved */ 55 #define CDB_GROUP7 0 /* reserved */ 56 57 /* 58 * Generic Command Definitions 59 * NOTE: CDROM commands are defined in cdio.h 60 */ 61 62 /* 63 * Group 0 Commands (CDB range 0x00 - 0x1F) 64 */ 65 #define SCMD_GROUP0 0x00 66 67 /* 68 * Group 0 commands, All Devices 69 */ 70 #define SCMD_TEST_UNIT_READY 0x00 71 #define SCMD_REQUEST_SENSE 0x03 72 #define SCMD_INQUIRY 0x12 73 #define SCMD_COPY 0x18 74 #define SCMD_GDIAG 0x1C /* receive diagnostic results */ 75 #define SCMD_SDIAG 0x1D /* send diagnostic results */ 76 77 /* 78 * Group 0 commands, Direct Access Devices 79 */ 80 /* SCMD_TEST_UNIT_READY 0x00 */ 81 #define SCMD_REZERO_UNIT 0x01 82 /* SCMD_REQUEST_SENSE 0x03 */ 83 #define SCMD_FORMAT 0x04 84 #define SCMD_REASSIGN_BLOCK 0x07 85 #define SCMD_READ 0x08 86 #define SCMD_WRITE 0x0a 87 #define SCMD_SEEK 0x0b 88 /* SCMD_INQUIRY 0x12 */ 89 #define SCMD_MODE_SELECT 0x15 90 #define SCMD_RESERVE 0x16 91 #define SCMD_RELEASE 0x17 92 /* SCMD_COPY 0x18 */ 93 #define SCMD_MODE_SENSE 0x1a 94 #define SCMD_START_STOP 0x1b 95 /* SCMD_GDIAG 0x1C */ 96 /* SCMD_SDIAG 0x1D */ 97 #define SCMD_DOORLOCK 0x1E /* Prevent/Allow Medium Removal */ 98 99 /* 100 * Group 0 commands, Sequential Access Devices 101 */ 102 /* SCMD_TEST_UNIT_READY 0x00 */ 103 #define SCMD_REWIND 0x01 /* Note similarity to SCMD_REZERO */ 104 /* SCMD_REQUEST_SENSE 0x03 */ 105 #define SCMD_READ_BLKLIM 0x05 106 /* SCMD_READ 0x08 */ 107 /* SCMD_WRITE 0x0a */ 108 #define SCMD_TRK_SEL 0x0b /* Note similarity to SCMD_SEEK */ 109 #define SCMD_READ_REVERSE 0x0f 110 #define SCMD_WRITE_FILE_MARK 0x10 111 #define SCMD_SPACE 0x11 112 /* SCMD_INQUIRY 0x12 */ 113 #define SCMD_VERIFY_G0 0x13 114 #define SCMD_RECOVER_BUF 0x14 115 /* SCMD_MODE_SELECT 0x15 */ 116 /* SCMD_RESERVE 0x16 */ 117 /* SCMD_RELEASE 0x17 */ 118 /* SCMD_COPY 0x18 */ 119 #define SCMD_ERASE 0x19 120 /* SCMD_MODE_SENSE 0x1a */ 121 #define SCMD_LOAD 0x1b /* Note similarity to SCMD_START_STOP */ 122 /* SCMD_GDIAG 0x1c */ 123 /* SCMD_SDIAG 0x1d */ 124 /* SCMD_DOORLOCK 0x1e */ 125 126 127 /* 128 * Group 0 commands, Printer Devices 129 */ 130 /* SCMD_TEST_UNIT_READY 0x00 */ 131 /* SCMD_REQUEST_SENSE 0x03 */ 132 /* SCMD_FORMAT 0x04 */ 133 #define SCMD_PRINT 0x0a /* Note similarity to SCMD_WRITE */ 134 #define SCMD_SLEW_PRINT 0x0b /* ? similar to SCMD_SEEK ? */ 135 #define SCMD_FLUSH_PRINT_BUF 0x10 /* ? similar to SCMD_WRITE_FILE_MARK */ 136 /* SCMD_INQUIRY 0x12 */ 137 /* SCMD_RECOVER_BUF 0x14 */ 138 /* SCMD_MODE_SELECT 0x15 */ 139 /* SCMD_RESERVE 0x16 */ 140 /* SCMD_RELEASE 0x17 */ 141 /* SCMD_COPY 0x18 */ 142 /* SCMD_MODE_SENSE 0x1a */ 143 #define SCMD_STOP_PRINT 0x1b /* Note similarity to SCMD_START_STOP */ 144 /* SCMD_GDIAG 0x1c */ 145 /* SCMD_SDIAG 0x1d */ 146 147 /* 148 * Group 0 commands, Processor Devices 149 */ 150 /* SCMD_TEST_UNIT_READY 0x00 */ 151 /* SCMD_REQUEST_SENSE 0x03 */ 152 #define SCMD_RECEIVE 0x08 /* Note similarity to SCMD_READ */ 153 #define SCMD_SEND 0x0a /* Note similarity to SCMD_WRITE */ 154 /* SCMD_INQUIRY 0x12 */ 155 /* SCMD_COPY 0x18 */ 156 /* SCMD_MODE_SENSE 0x1a */ 157 /* SCMD_GDIAG 0x1c */ 158 /* SCMD_SDIAG 0x1d */ 159 160 /* 161 * Group 0 commands, WORM Devices 162 */ 163 /* SCMD_TEST_UNIT_READY 0x00 */ 164 /* SCMD_REZERO_UNIT 0x01 */ 165 /* SCMD_REQUEST_SENSE 0x03 */ 166 /* SCMD_REASSIGN_BLOCK 0x07 */ 167 /* SCMD_READ 0x08 */ 168 /* SCMD_WRITE 0x0a */ 169 /* SCMD_SEEK 0x0b */ 170 /* SCMD_INQUIRY 0x12 */ 171 /* SCMD_MODE_SELECT 0x15 */ 172 /* SCMD_RESERVE 0x16 */ 173 /* SCMD_RELEASE 0x17 */ 174 /* SCMD_COPY 0x18 */ 175 /* SCMD_MODE_SENSE 0x1a */ 176 /* SCMD_START_STOP 0x1b */ 177 /* SCMD_GDIAG 0x1C */ 178 /* SCMD_SDIAG 0x1D */ 179 /* SCMD_DOORLOCK 0x1E */ 180 181 /* 182 * Group 0 commands, Read Only Devices 183 */ 184 /* SCMD_TEST_UNIT_READY 0x00 */ 185 /* SCMD_REZERO_UNIT 0x01 */ 186 /* SCMD_REQUEST_SENSE 0x03 */ 187 /* SCMD_REASSIGN_BLOCK 0x07 */ 188 /* SCMD_READ 0x08 */ 189 /* SCMD_SEEK 0x0b */ 190 /* SCMD_INQUIRY 0x12 */ 191 /* SCMD_MODE_SELECT 0x15 */ 192 /* SCMD_RESERVE 0x16 */ 193 /* SCMD_RELEASE 0x17 */ 194 /* SCMD_COPY 0x18 */ 195 /* SCMD_MODE_SENSE 0x1a */ 196 /* SCMD_START_STOP 0x1b */ 197 /* SCMD_GDIAG 0x1C */ 198 /* SCMD_SDIAG 0x1D */ 199 /* SCMD_DOORLOCK 0x1E */ 200 201 /* 202 * Group 1 Commands (CDB range 0x20 - 0x3F) 203 */ 204 #define SCMD_GROUP1 0x20 205 206 /* 207 * Group 1 Commands, All Devices 208 */ 209 #define SCMD_COMPARE 0x39 210 #define SCMD_COPY_VERIFY 0x3A 211 #define SCMD_PERSISTENT_RESERVE_IN 0x5E 212 #define SCMD_PERSISTENT_RESERVE_OUT 0x5F 213 #define SCMD_PRIN SCMD_PERSISTENT_RESERVE_IN 214 #define SCMD_PROUT SCMD_PERSISTENT_RESERVE_OUT 215 216 /* 217 * Group 1 Commands, Direct Access Devices 218 */ 219 #define SCMD_READ_FORMAT_CAP 0x23 220 #define SCMD_READ_CAPACITY 0x25 221 #define SCMD_READ_G1 0x28 /* Note that only the group changed */ 222 #define SCMD_WRITE_G1 0x2a /* Note that only the group changed */ 223 #define SCMD_SEEK_G1 0x2b /* Note that only the group changed */ 224 #define SCMD_WRITE_VERIFY 0x2e 225 #define SCMD_VERIFY 0x2f 226 #define SCMD_SEARCH_HIGH 0x30 227 #define SCMD_SEARCH_EQUAL 0x31 228 #define SCMD_SEARCH_LOW 0x32 229 #define SCMD_SET_LIMITS 0x33 230 #define SCMD_SYNCHRONIZE_CACHE 0x35 231 #define SCMD_READ_DEFECT_LIST 0x37 232 #define SCMD_WRITE_BUFFER 0x3B 233 #define SCMD_READ_BUFFER 0x3c 234 #define SCMD_READ_LONG 0x3E 235 #define SCMD_WRITE_LONG 0x3F 236 #define SCMD_RESERVE_G1 0x56 237 #define SCMD_RELEASE_G1 0x57 238 #define SCMD_MODE_SELECT_G1 0x55 239 #define SCMD_MODE_SENSE_G1 0x5A 240 #define SCMD_GET_CONFIGURATION 0x46 241 #define SCMD_LOG_SELECT_G1 0x4C 242 #define SCMD_LOG_SENSE_G1 0x4d 243 244 245 /* 246 * Group 1 Commands, Sequential Access Devices 247 */ 248 #define SCMD_LOCATE 0x2B /* Note similarity to SCMD_SEEK_G1 */ 249 #define SCMD_READ_POSITION 0x34 250 #define SCMD_REPORT_DENSITIES 0x44 251 252 /* 253 * Group 1 Commands, Printer Devices 254 */ 255 /* (None Defined) */ 256 257 /* 258 * Group 1 Commands, Processor Devices 259 */ 260 /* (None Defined) */ 261 262 /* 263 * Group 1 Commands, WORM Devices 264 */ 265 /* SCMD_READ_CAPACITY 0x25 */ 266 /* SCMD_READ_G1 0x28 */ 267 /* SCMD_WRITE_G1 0x2a */ 268 /* SCMD_SEEK_G1 0x2b */ 269 /* SCMD_WRITE_VERIFY 0x2e */ 270 /* SCMD_VERIFY 0x2f */ 271 /* SCMD_SEARCH_HIGH 0x30 */ 272 /* SCMD_SEARCH_EQUAL 0x31 */ 273 /* SCMD_SEARCH_LOW 0x32 */ 274 /* SCMD_SET_LIMITS 0x33 */ 275 276 /* 277 * Group 1 Commands, Read Only Devices 278 */ 279 /* SCMD_READ_CAPACITY 0x25 */ 280 /* SCMD_READ_G1 0x28 */ 281 /* SCMD_SEEK_G1 0x2b */ 282 /* SCMD_VERIFY 0x2f */ 283 /* SCMD_SEARCH_HIGH 0x30 */ 284 /* SCMD_SEARCH_EQUAL 0x31 */ 285 /* SCMD_SEARCH_LOW 0x32 */ 286 /* SCMD_SET_LIMITS 0x33 */ 287 288 /* 289 * Group 1 Commands, MMC Devices 290 */ 291 292 /* GET EVENT STATUS NOTIFICATION, MMC-3 5.6 */ 293 #define SCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a 294 295 /* event header */ 296 #define SD_GESN_HEADER_LEN 4 297 #define SD_GESN_HEADER_NEA 0x80 /* byte 2 */ 298 #define SD_GESN_HEADER_CLASS 0x07 /* byte 2 */ 299 300 /* media class event class and event data that follows the header */ 301 #define SD_GESN_MEDIA_CLASS 4 302 303 #define SD_GESN_MEDIA_DATA_LEN 4 304 #define SD_GESN_MEDIA_EVENT_CODE 0x0f /* byte 0 */ 305 #define SD_GESN_MEDIA_EVENT_STATUS_PRESENT 0x02 /* byte 1 */ 306 #define SD_GESN_MEDIA_EVENT_STATUS_TRAY_OPEN 0x01 /* byte 1 */ 307 308 /* media event code */ 309 #define SD_GESN_MEDIA_EVENT_NOCHG 0 310 #define SD_GESN_MEDIA_EVENT_EJECTREQUEST 1 311 #define SD_GESN_MEDIA_EVENT_NEWMEDIA 2 312 #define SD_GESN_MEDIA_EVENT_MEDIAREMOVAL 3 313 #define SD_GESN_MEDIA_EVENT_MEDIACHANGED 4 314 #define SD_GESN_MEDIA_EVENT_BGFORMATCOMPLETED 5 315 #define SD_GESN_MEDIA_EVENT_BGFORMATRESTARTED 6 316 317 318 /* 319 * Group 3 Commands 320 */ 321 #define SCMD_VAR_LEN 0x7f 322 323 /* 324 * Group 4 Commands, All Devices 325 */ 326 #define SCMD_GROUP4 0x80 327 #define SCMD_EXTENDED_COPY 0x83 328 #define SCMD_VERIFY_G4 0x8f 329 330 /* 331 * Group 4 Commands, Direct Access Devices 332 */ 333 #define SCMD_READ_G4 0x88 334 #define SCMD_WRITE_G4 0x8a 335 #define SCMD_WRITE_VERIFY_G4 0x8e 336 #define SCMD_SVC_ACTION_IN_G4 0x9e 337 #define SCMD_SVC_ACTION_OUT_G4 0x9f 338 339 /* 340 * Group 4 Service Actions for Service Action In (16) 341 */ 342 #define SSVC_ACTION_READ_CAPACITY_G4 0x10 343 #define SSVC_ACTION_READ_LONG_G4 0x11 344 345 /* 346 * Group 4 Service Actions for Service Action Out (16) 347 */ 348 #define SSVC_ACTION_WRITE_LONG_G4 0x11 349 350 /* 351 * Group 4 Commands, Sequential Access Devics 352 */ 353 #define SCMD_WRITE_FILE_MARK_G4 0x80 354 #define SCMD_READ_REVERSE_G4 0x81 355 #define SCMD_READ_ATTRIBUTE 0x8c 356 #define SCMD_WRITE_ATTRIBUTE 0x8d 357 #define SCMD_SPACE_G4 0x91 358 #define SCMD_LOCATE_G4 0x92 359 360 /* 361 * Group 5 commands. 362 */ 363 #define SCMD_GROUP5 0xA0 364 #define SCMD_REPORT_LUNS 0xA0 365 #define SCMD_SECURITY_PROTO_IN 0xA2 366 #define SCMD_MAINTENANCE_IN 0xA3 367 #define SCMD_MAINTENANCE_OUT 0xA4 368 #define SCMD_READ_G5 0xA8 369 #define SCMD_WRITE_G5 0xAA 370 #define SCMD_SVC_ACTION_OUT_G5 0xA9 371 #define SCMD_SVC_ACTION_IN_G5 0xAB 372 #define SCMD_GET_PERFORMANCE 0xAC 373 #define SCMD_WRITE_VERIFY_G5 0xAE 374 #define SCMD_VERIFY_G5 0xAF 375 #define SCMD_SECURITY_PROTO_OUT 0xB5 376 377 /* 378 * Group 5 Service Actions for Maintenance In (12) 379 */ 380 #define SSVC_ACTION_GET_TARGET_PORT_GROUPS 0x0a 381 #define SSVC_ACTION_GET_SUPPORTED_OPERATIONS 0x0c 382 #define SSVC_SCTION_GET_SUPPORTED_MANAGEMENT 0x0d 383 #define SSVC_ACTION_GET_TIMESTAMP 0x0f 384 385 /* 386 * Group 5 Service Actions for Maintenance Out (12) 387 */ 388 #define SSVC_ACTION_SET_DEVICE_IDENTIFIER 0x06 389 #define SSVC_ACTION_SET_PRIORITY 0x0e 390 #define SSVC_ACTION_SET_TARGET_PORT_GROUPS 0x0a 391 #define SSVC_ACTION_SET_TIMESTAMP 0x0f 392 393 /* 394 * Group 5 Service Actions for Service Action In (12) 395 */ 396 #define SSVC_ACTION_READ_MEDIA_SERIAL 0x01 397 /* 398 * scsi_key_strings for SCMD_ definitions 399 * NOTE: see SCSI_CMDS_KEY_STRINGS_CDIO in cdio.h for additional 400 * command-to-string translations. 401 */ 402 #define SCSI_CMDS_KEY_STRINGS \ 403 /* 0x00 */ SCMD_TEST_UNIT_READY, "test_unit_ready", \ 404 /* 0x01 */ SCMD_REWIND | \ 405 SCMD_REZERO_UNIT, "rezero/rewind", \ 406 /* 0x03 */ SCMD_REQUEST_SENSE, "request_sense", \ 407 /* 0x04 */ SCMD_FORMAT, "format", \ 408 /* 0x05 */ SCMD_READ_BLKLIM, "read_block_limits", \ 409 /* 0x07 */ SCMD_REASSIGN_BLOCK, "reassign", \ 410 /* 0x08 */ SCMD_READ | \ 411 SCMD_RECEIVE, "read", \ 412 /* 0x0a */ SCMD_PRINT | \ 413 SCMD_SEND | \ 414 SCMD_WRITE, "write", \ 415 /* 0x0b */ SCMD_SEEK | \ 416 SCMD_SLEW_PRINT | \ 417 SCMD_TRK_SEL, "seek", \ 418 /* 0x0f */ SCMD_READ_REVERSE, "read_reverse", \ 419 /* 0x10 */ SCMD_WRITE_FILE_MARK | \ 420 SCMD_FLUSH_PRINT_BUF, "write_file_mark", \ 421 /* 0x11 */ SCMD_SPACE, "space", \ 422 /* 0x12 */ SCMD_INQUIRY, "inquiry", \ 423 /* 0x13 */ SCMD_VERIFY_G0, "verify", \ 424 /* 0x14 */ SCMD_RECOVER_BUF, "recover_buffer_data", \ 425 /* 0x15 */ SCMD_MODE_SELECT, "mode_select", \ 426 /* 0x16 */ SCMD_RESERVE, "reserve", \ 427 /* 0x17 */ SCMD_RELEASE, "release", \ 428 /* 0x18 */ SCMD_COPY, "copy", \ 429 /* 0x19 */ SCMD_ERASE, "erase_tape", \ 430 /* 0x1a */ SCMD_MODE_SENSE, "mode_sense", \ 431 /* 0x1b */ SCMD_LOAD | \ 432 SCMD_START_STOP | \ 433 SCMD_STOP_PRINT, "load/start/stop", \ 434 /* 0x1c */ SCMD_GDIAG, "get_diagnostic_results", \ 435 /* 0x1d */ SCMD_SDIAG, "send_diagnostic_command", \ 436 /* 0x1e */ SCMD_DOORLOCK, "door_lock", \ 437 /* 0x23 */ SCMD_READ_FORMAT_CAP, "read_format_capacity", \ 438 /* 0x25 */ SCMD_READ_CAPACITY, "read_capacity", \ 439 /* 0x28 */ SCMD_READ_G1, "read(10)", \ 440 /* 0x2a */ SCMD_WRITE_G1, "write(10)", \ 441 /* 0x2b */ SCMD_SEEK_G1 | \ 442 SCMD_LOCATE, "seek(10)", \ 443 /* 0x2e */ SCMD_WRITE_VERIFY, "write_verify", \ 444 /* 0x2f */ SCMD_VERIFY, "verify(10)", \ 445 /* 0x30 */ SCMD_SEARCH_HIGH, "search_data_high", \ 446 /* 0x31 */ SCMD_SEARCH_EQUAL, "search_data_equal", \ 447 /* 0x32 */ SCMD_SEARCH_LOW, "search_data_low", \ 448 /* 0x33 */ SCMD_SET_LIMITS, "set_limits", \ 449 /* 0x34 */ SCMD_READ_POSITION, "read_position", \ 450 /* 0x35 */ SCMD_SYNCHRONIZE_CACHE, "synchronize_cache", \ 451 /* 0x37 */ SCMD_READ_DEFECT_LIST, "read_defect_data", \ 452 /* 0x39 */ SCMD_COMPARE, "compare", \ 453 /* 0x3a */ SCMD_COPY_VERIFY, "copy_verify", \ 454 /* 0x3b */ SCMD_WRITE_BUFFER, "write_buffer", \ 455 /* 0x3c */ SCMD_READ_BUFFER, "read_buffer", \ 456 /* 0x3e */ SCMD_READ_LONG, "read_long", \ 457 /* 0x3f */ SCMD_WRITE_LONG, "write_long", \ 458 /* 0x44 */ SCMD_REPORT_DENSITIES | \ 459 /* SCMD_READ_HEADER (from cdio.h) | */ \ 460 0, "report_densities/read_header", \ 461 /* 0x4c */ SCMD_LOG_SELECT_G1, "log_select", \ 462 /* 0x4d */ SCMD_LOG_SENSE_G1, "log_sense", \ 463 /* 0x55 */ SCMD_MODE_SELECT_G1, "mode_select(10)", \ 464 /* 0x56 */ SCMD_RESERVE_G1, "reserve(10)", \ 465 /* 0x57 */ SCMD_RELEASE_G1, "release(10)", \ 466 /* 0x5a */ SCMD_MODE_SENSE_G1, "mode_sense(10)", \ 467 /* 0x5e */ SCMD_PERSISTENT_RESERVE_IN, "persistent_reserve_in", \ 468 /* 0x5f */ SCMD_PERSISTENT_RESERVE_OUT, "persistent_reserve_out", \ 469 /* 0x80 */ SCMD_WRITE_FILE_MARK_G4, "write_file_mark(16)", \ 470 /* 0x81 */ SCMD_READ_REVERSE_G4, "read_reverse(16)", \ 471 /* 0x83 */ SCMD_EXTENDED_COPY, "extended_copy", \ 472 /* 0x88 */ SCMD_READ_G4, "read(16)", \ 473 /* 0x8a */ SCMD_WRITE_G4, "write(16)", \ 474 /* 0x8c */ SCMD_READ_ATTRIBUTE, "read_attribute", \ 475 /* 0x8d */ SCMD_WRITE_ATTRIBUTE, "write_attribute", \ 476 /* 0x8e */ SCMD_WRITE_VERIFY_G4, "write_verify(16)", \ 477 /* 0x8f */ SCMD_VERIFY_G4, "verify(16)", \ 478 /* 0x91 */ SCMD_SPACE_G4, "space(16)", \ 479 /* 0x92 */ SCMD_LOCATE_G4, "locate(16)", \ 480 /* 0x9e */ SCMD_SVC_ACTION_IN_G4, "service_action_in(16)", \ 481 /* 0x9f */ SCMD_SVC_ACTION_OUT_G4, "service_action_out(16)", \ 482 /* 0xa0 */ SCMD_REPORT_LUNS, "report_luns", \ 483 /* 0xa2 */ SCMD_SECURITY_PROTO_IN, "security_protocol_in", \ 484 /* 0xa3 */ SCMD_MAINTENANCE_IN, "maintenance_in", \ 485 /* 0xa4 */ SCMD_MAINTENANCE_OUT, "maintenance_out", \ 486 /* 0xa8 */ SCMD_READ_G5, "read(12)", \ 487 /* 0xa9 */ SCMD_SVC_ACTION_OUT_G5, "service_action_out(12)", \ 488 /* 0xaa */ SCMD_WRITE_G5, "write(12)", \ 489 /* 0xab */ SCMD_SVC_ACTION_IN_G5, "service_action_in(12)", \ 490 /* 0xac */ SCMD_GET_PERFORMANCE, "get_performance", \ 491 /* 0xAE */ SCMD_WRITE_VERIFY_G5, "write_verify(12)", \ 492 /* 0xAF */ SCMD_VERIFY_G5, "verify(12)", \ 493 /* 0xb5 */ SCMD_SECURITY_PROTO_OUT, "security_protocol_out" \ 494 /* see cdio.h for additional command-to-string translations */ 495 496 /* XXX not a command code, does not belong here */ 497 #define ATAPI_CAPABILITIES 0x2A 498 499 #ifdef __cplusplus 500 } 501 #endif 502 503 /* 504 * Below are inclusions of files describing various command structures 505 * of interest. 506 */ 507 #include <sys/scsi/generic/inquiry.h> 508 #include <sys/scsi/generic/sense.h> 509 510 /* 511 * Private Vendor Unique Commands - Each implementation provides this. 512 */ 513 #include <sys/scsi/impl/commands.h> 514 515 #endif /* _SYS_SCSI_GENERIC_COMMANDS_H */ 516