xref: /illumos-gate/usr/src/uts/common/sys/fibre-channel/fca/qlc/exioct.h (revision aedf2b3bb56b025fcaf87b49ec6c8aeea07f16d7)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /* Copyright 2009 QLogic Corporation */
23 
24 /*
25  * File Name: exioct.h
26  *
27  * San/Device Management Ioctl Header
28  * File is created to adhere to Solaris requirement using 8-space tabs.
29  *
30  * !!!!! PLEASE DO NOT REMOVE THE TABS !!!!!
31  * !!!!! PLEASE NO SINGLE LINE COMMENTS: // !!!!!
32  * !!!!! PLEASE NO MORE THAN 80 CHARS PER LINE !!!!!
33  *
34  * ***********************************************************************
35  * *                                                                    **
36  * *                            NOTICE                                  **
37  * *            COPYRIGHT (C) 2000-2009 QLOGIC CORPORATION              **
38  * *                    ALL RIGHTS RESERVED                             **
39  * *                                                                    **
40  * ***********************************************************************
41  */
42 
43 #ifndef	_EXIOCT_H
44 #define	_EXIOCT_H
45 
46 #ifdef	__cplusplus
47 extern "C" {
48 #endif
49 
50 #include <exioctso.h>
51 
52 /*
53  * NOTE: the following version defines must be updated each time the
54  *	 changes made may affect the backward compatibility of the
55  *	 input/output relations of the SDM IOCTL functions.
56  */
57 #define	EXT_VERSION				5
58 
59 /*
60  * OS independent General definitions
61  */
62 #define	EXT_DEF_SIGNATURE_SIZE			8
63 #define	EXT_DEF_WWN_NAME_SIZE			8
64 #define	EXT_DEF_WWP_NAME_SIZE			8
65 #define	EXT_DEF_SERIAL_NUM_SIZE			4
66 #define	EXT_DEF_PORTID_SIZE			4
67 #define	EXT_DEF_PORTID_SIZE_ACTUAL		3
68 #define	EXT_DEF_MAX_STR_SIZE			128
69 #define	EXT_DEF_SCSI_PASSTHRU_CDB_LENGTH	12
70 #define	EXT_DEF_MAC_ADDRESS_SIZE		6
71 
72 #define	EXT_DEF_ADDR_MODE_32			1
73 #define	EXT_DEF_ADDR_MODE_64			2
74 
75 /*
76  * ***********************************************************************
77  * OS dependent General configuration defines
78  * ***********************************************************************
79  */
80 #define	EXT_DEF_MAX_HBA			EXT_DEF_MAX_HBA_OS
81 #define	EXT_DEF_MAX_BUS			EXT_DEF_MAX_BUS_OS
82 #define	EXT_DEF_MAX_TARGET		EXT_DEF_MAX_TARGET_OS
83 #define	EXT_DEF_MAX_LUN			EXT_DEF_MAX_LUN_OS
84 #define	EXT_DEF_NON_SCSI3_MAX_LUN	EXT_DEF_NON_SCSI3_MAX_LUN_OS
85 
86 /*
87  * ***********************************************************************
88  * Common header struct definitions for San/Device Mgmt
89  * ***********************************************************************
90  */
91 typedef struct {
92 	UINT64	Signature;			/* 8 chars string */
93 	UINT64	RequestAdr;			/* 8  */
94 	UINT64	ResponseAdr;			/* 8  */
95 	UINT64	VendorSpecificData;		/* 8 chars string */
96 	UINT32	Status;				/* 4  */
97 	UINT32	DetailStatus;			/* 4  */
98 	UINT32	Reserved1;			/* 4  */
99 	UINT32	RequestLen;			/* 4  */
100 	UINT32	ResponseLen;			/* 4  */
101 	UINT16	AddrMode;			/* 2  */
102 	UINT16	Version;			/* 2  */
103 	UINT16	SubCode;			/* 2  */
104 	UINT16	Instance;			/* 2  */
105 	UINT16	HbaSelect;			/* 2  */
106 	UINT16	VendorSpecificStatus[11];	/* 22 */
107 } EXT_IOCTL, *PEXT_IOCTL;			/* size = 84 / 0x54 */
108 
109 typedef union _ext_signature {
110 	UINT64	Signature;
111 	char	bytes[EXT_DEF_SIGNATURE_SIZE];
112 } ext_sig_t;
113 
114 /*
115  * Addressing mode used by the user application
116  */
117 #define	EXT_ADDR_MODE	EXT_ADDR_MODE_OS
118 
119 /*
120  * Status.  These macros are being used for setting Status field in
121  * EXT_IOCTL structure.
122  */
123 #define	EXT_STATUS_OK			0
124 #define	EXT_STATUS_ERR			1
125 #define	EXT_STATUS_BUSY			2
126 #define	EXT_STATUS_PENDING		3
127 #define	EXT_STATUS_SUSPENDED		4
128 #define	EXT_STATUS_RETRY_PENDING	5
129 #define	EXT_STATUS_INVALID_PARAM	6
130 #define	EXT_STATUS_DATA_OVERRUN		7
131 #define	EXT_STATUS_DATA_UNDERRUN	8
132 #define	EXT_STATUS_DEV_NOT_FOUND	9
133 #define	EXT_STATUS_COPY_ERR		10
134 #define	EXT_STATUS_MAILBOX		11
135 #define	EXT_STATUS_UNSUPPORTED_SUBCODE	12
136 #define	EXT_STATUS_UNSUPPORTED_VERSION	13
137 #define	EXT_STATUS_MS_NO_RESPONSE	14
138 #define	EXT_STATUS_SCSI_STATUS		15
139 #define	EXT_STATUS_BUFFER_TOO_SMALL	16
140 #define	EXT_STATUS_NO_MEMORY		17
141 #define	EXT_STATUS_UNKNOWN		18
142 #define	EXT_STATUS_UNKNOWN_DSTATUS	19
143 #define	EXT_STATUS_INVALID_REQUEST	20
144 #define	EXT_STATUS_DEVICE_NOT_READY	21
145 #define	EXT_STATUS_DEVICE_OFFLINE	22
146 #define	EXT_STATUS_HBA_NOT_READY	23
147 #define	EXT_STATUS_HBA_QUEUE_FULL	24
148 #define	EXT_STATUS_INVALID_VPINDEX	25
149 
150 /*
151  * Detail Status contains the SCSI bus status codes.
152  */
153 
154 #define	EXT_DSTATUS_GOOD			0x00
155 #define	EXT_DSTATUS_CHECK_CONDITION		0x02
156 #define	EXT_DSTATUS_CONDITION_MET		0x04
157 #define	EXT_DSTATUS_BUSY			0x08
158 #define	EXT_DSTATUS_INTERMEDIATE		0x10
159 #define	EXT_DSTATUS_INTERMEDIATE_COND_MET	0x14
160 #define	EXT_DSTATUS_RESERVATION_CONFLICT	0x18
161 #define	EXT_DSTATUS_COMMAND_TERMINATED		0x22
162 #define	EXT_DSTATUS_QUEUE_FULL			0x28
163 
164 /*
165  * Detail Status contains the needed Response buffer space(bytes)
166  * when Status = EXT_STATUS_BUFFER_TOO_SMALL
167  */
168 
169 
170 /*
171  * Detail Status contains one of the following codes
172  * when Status = EXT_STATUS_INVALID_PARAM or
173  *             = EXT_STATUS_DEV_NOT_FOUND
174  */
175 #define	EXT_DSTATUS_NOADNL_INFO			0x00
176 #define	EXT_DSTATUS_HBA_INST			0x01
177 #define	EXT_DSTATUS_TARGET			0x02
178 #define	EXT_DSTATUS_LUN				0x03
179 #define	EXT_DSTATUS_REQUEST_LEN			0x04
180 #define	EXT_DSTATUS_PATH_INDEX			0x05
181 
182 /*
183  * Currently supported DeviceControl / ioctl command codes
184  */
185 #define	EXT_CC_QUERY			EXT_CC_QUERY_OS
186 #define	EXT_CC_SEND_FCCT_PASSTHRU	EXT_CC_SEND_FCCT_PASSTHRU_OS
187 #define	EXT_CC_REG_AEN			EXT_CC_REG_AEN_OS
188 #define	EXT_CC_GET_AEN			EXT_CC_GET_AEN_OS
189 #define	EXT_CC_SEND_ELS_RNID		EXT_CC_SEND_ELS_RNID_OS
190 #define	EXT_CC_SEND_SCSI_PASSTHRU	EXT_CC_SCSI_PASSTHRU_OS
191 #define	EXT_CC_READ_HOST_PARAMS		EXT_CC_READ_HOST_PARAMS_OS
192 #define	EXT_CC_READ_RISC_PARAMS		EXT_CC_READ_RISC_PARAMS_OS
193 #define	EXT_CC_UPDATE_HOST_PARAMS	EXT_CC_UPDATE_HOST_PARAMS_OS
194 #define	EXT_CC_UPDATE_RISC_PARAMS	EXT_CC_UPDATE_RISC_PARAMS_OS
195 #define	EXT_CC_READ_NVRAM		EXT_CC_READ_NVRAM_OS
196 #define	EXT_CC_UPDATE_NVRAM		EXT_CC_UPDATE_NVRAM_OS
197 #define	EXT_CC_HOST_IDX			EXT_CC_HOST_IDX_OS
198 #define	EXT_CC_LOOPBACK			EXT_CC_LOOPBACK_OS
199 #define	EXT_CC_READ_OPTION_ROM		EXT_CC_READ_OPTION_ROM_OS
200 #define	EXT_CC_READ_OPTION_ROM_EX	EXT_CC_READ_OPTION_ROM_EX_OS
201 #define	EXT_CC_UPDATE_OPTION_ROM	EXT_CC_UPDATE_OPTION_ROM_OS
202 #define	EXT_CC_UPDATE_OPTION_ROM_EX	EXT_CC_UPDATE_OPTION_ROM_EX_OS
203 #define	EXT_CC_GET_VPD			EXT_CC_GET_VPD_OS
204 #define	EXT_CC_SET_VPD			EXT_CC_SET_VPD_OS
205 #define	EXT_CC_GET_FCACHE		EXT_CC_GET_FCACHE_OS
206 #define	EXT_CC_GET_FCACHE_EX		EXT_CC_GET_FCACHE_EX_OS
207 #define	EXT_CC_HOST_DRVNAME		EXT_CC_HOST_DRVNAME_OS
208 #define	EXT_CC_GET_SFP_DATA		EXT_CC_GET_SFP_DATA_OS
209 #define	EXT_CC_WWPN_TO_SCSIADDR		EXT_CC_WWPN_TO_SCSIADDR_OS
210 #define	EXT_CC_PORT_PARAM		EXT_CC_PORT_PARAM_OS
211 #define	EXT_CC_GET_PCI_DATA		EXT_CC_GET_PCI_DATA_OS
212 #define	EXT_CC_GET_FWEXTTRACE		EXT_CC_GET_FWEXTTRACE_OS
213 #define	EXT_CC_GET_FWFCETRACE		EXT_CC_GET_FWFCETRACE_OS
214 #define	EXT_CC_GET_VP_CNT_ID		EXT_CC_GET_VP_CNT_ID_OS
215 #define	EXT_CC_VPORT_CMD		EXT_CC_VPORT_CMD_OS
216 #define	EXT_CC_ACCESS_FLASH		EXT_CC_ACCESS_FLASH_OS
217 #define	EXT_CC_RESET_FW			EXT_CC_RESET_FW_OS
218 
219 /*
220  * HBA port operations
221  */
222 #define	EXT_CC_GET_DATA		EXT_CC_GET_DATA_OS
223 #define	EXT_CC_SET_DATA		EXT_CC_SET_DATA_OS
224 
225 /*
226  * The following DeviceControl / ioctl command codes currently are not
227  * supported.
228  */
229 #define	EXT_CC_SEND_ELS_RTIN	EXT_CC_SEND_ELS_RTIN_OS
230 
231 
232 /*
233  * ***********************************************************************
234  * EXT_IOCTL SubCode definition.
235  * These macros are being used for setting SubCode field in EXT_IOCTL
236  * structure.
237  * ***********************************************************************
238  */
239 
240 /*
241  * Query.
242  * Uses with EXT_QUERY as the ioctl code.
243  */
244 #define	EXT_SC_QUERY_HBA_NODE	1
245 #define	EXT_SC_QUERY_HBA_PORT	2
246 #define	EXT_SC_QUERY_DISC_PORT	3
247 #define	EXT_SC_QUERY_DISC_TGT	4
248 #define	EXT_SC_QUERY_DISC_LUN	5	/* Currently Not Supported */
249 #define	EXT_SC_QUERY_DRIVER	6
250 #define	EXT_SC_QUERY_FW		7
251 #define	EXT_SC_QUERY_CHIP	8
252 #define	EXT_SC_QUERY_CNA_PORT	9
253 
254 /*
255  * Get.
256  * Uses with EXT_GET_DATA as the ioctl code
257  */
258 /* 1 - 99 Common */
259 #define	EXT_SC_GET_SCSI_ADDR		1	/* Currently Not Supported */
260 #define	EXT_SC_GET_ERR_DETECTIONS	2	/* Currently Not Supported */
261 #define	EXT_SC_GET_STATISTICS		3
262 #define	EXT_SC_GET_BUS_MODE		4	/* Currently Not Supported */
263 #define	EXT_SC_GET_DR_DUMP_BUF		5	/* Currently Not Supported */
264 #define	EXT_SC_GET_RISC_CODE		6
265 #define	EXT_SC_GET_FLASH_RAM		7
266 #define	EXT_SC_GET_BEACON_STATE		8
267 #define	EXT_SC_GET_DCBX_PARAM		9
268 
269 /* 100 - 199 FC_INTF_TYPE */
270 #define	EXT_SC_GET_LINK_STATUS		101	/* Currently Not Supported */
271 #define	EXT_SC_GET_LOOP_ID		102	/* Currently Not Supported */
272 #define	EXT_SC_GET_LUN_BITMASK		103
273 #define	EXT_SC_GET_PORT_DATABASE	104	/* Currently Not Supported */
274 #define	EXT_SC_GET_PORT_DATABASE_MEM	105	/* Currently Not Supported */
275 #define	EXT_SC_GET_PORT_SUMMARY		106
276 #define	EXT_SC_GET_POSITION_MAP		107
277 #define	EXT_SC_GET_RETRY_CNT		108	/* Currently Not Supported */
278 #define	EXT_SC_GET_RNID			109
279 #define	EXT_SC_GET_RTIN			110	/* Currently Not Supported */
280 #define	EXT_SC_GET_FC_LUN_BITMASK	111
281 #define	EXT_SC_GET_FC_STATISTICS	112
282 #define	EXT_SC_GET_FC4_STATISTICS	113
283 #define	EXT_SC_GET_TARGET_ID		114
284 
285 
286 /* 200 - 299 SCSI_INTF_TYPE */
287 #define	EXT_SC_GET_SEL_TIMEOUT		201	/* Currently Not Supported */
288 
289 #define	EXT_DEF_DCBX_PARAM_BUF_SIZE	4096	/* Bytes */
290 
291 /*
292  * Set.
293  * Uses with EXT_SET_DATA as the ioctl code
294  */
295 /* 1 - 99 Common */
296 #define	EXT_SC_RST_STATISTICS		3
297 #define	EXT_SC_SET_BUS_MODE		4	/* Currently Not Supported */
298 #define	EXT_SC_SET_DR_DUMP_BUF		5	/* Currently Not Supported */
299 #define	EXT_SC_SET_RISC_CODE		6
300 #define	EXT_SC_SET_FLASH_RAM		7
301 #define	EXT_SC_SET_BEACON_STATE		8
302 
303 /* special types (non snia) */
304 #define	EXT_SC_SET_PARMS		99	/* dpb */
305 
306 /* 100 - 199 FC_INTF_TYPE */
307 #define	EXT_SC_SET_LUN_BITMASK		103
308 #define	EXT_SC_SET_RETRY_CNT		108	/* Currently Not Supported */
309 #define	EXT_SC_SET_RNID			109
310 #define	EXT_SC_SET_RTIN			110	/* Currently Not Supported */
311 #define	EXT_SC_SET_FC_LUN_BITMASK	111
312 #define	EXT_SC_ADD_TARGET_DEVICE	112
313 #define	EXT_SC_SWAP_TARGET_DEVICE	113
314 
315 /* 200 - 299 SCSI_INTF_TYPE */
316 #define	EXT_SC_SET_SEL_TIMEOUT		201	/* Currently Not Supported */
317 
318 /* SCSI passthrough */
319 #define	EXT_SC_SEND_SCSI_PASSTHRU	0
320 #define	EXT_SC_SEND_FC_SCSI_PASSTHRU	1
321 
322 /* NVRAM */
323 #define	EXT_SC_NVRAM_HARDWARE		0	/* Save */
324 #define	EXT_SC_NVRAM_DRIVER		1	/* Driver (Apply) */
325 #define	EXT_SC_NVRAM_ALL		2	/* NVRAM/Driver (Save+Apply) */
326 
327 /*
328  * Vport functions
329  * Used with EXT_CC_VPORT_CMD as the ioctl code.
330  */
331 #define	EXT_VF_SC_VPORT_GETINFO		1
332 #define	EXT_VF_SC_VPORT_DELETE		2
333 #define	EXT_VF_SC_VPORT_MODIFY		3
334 #define	EXT_VF_SC_VPORT_CREATE		4
335 
336 /*
337  * Flash access sub codes
338  * Used with EXT_CC_ACCESS_FLASH as the ioctl code.
339  */
340 #define	EXT_SC_FLASH_READ	0
341 #define	EXT_SC_FLASH_WRITE	1
342 
343 /*
344  * Reset FW subcodes for Schultz
345  * Used with EXT_CC_RESET_FW as the ioctl code.
346  */
347 #define	EXT_SC_RESET_FC_FW	1
348 #define	EXT_SC_RESET_MPI_FW	2
349 
350 /* Read */
351 
352 /* Write */
353 
354 /* Reset */
355 
356 /* Request struct */
357 
358 
359 /*
360  * Response struct
361  */
362 typedef struct _EXT_HBA_NODE {
363 	UINT32	DriverAttr;				/* 4 */
364 	UINT32	FWAttr;					/* 4 */
365 	UINT16	PortCount;				/* 2; 1 */
366 	UINT16	InterfaceType;				/* 2; FC/SCSI */
367 	UINT8	WWNN[EXT_DEF_WWN_NAME_SIZE];		/* 8 */
368 	UINT8	Manufacturer[EXT_DEF_MAX_STR_SIZE];	/* 128; "QLOGIC" */
369 	UINT8	Model[EXT_DEF_MAX_STR_SIZE];		/* 128; "QLA2200" */
370 	UINT8	SerialNum[EXT_DEF_SERIAL_NUM_SIZE];	/* 4;  123  */
371 	UINT8	DriverVersion[EXT_DEF_MAX_STR_SIZE];	/* 128; "7.4.3" */
372 	UINT8	FWVersion[EXT_DEF_MAX_STR_SIZE];	/* 128; "2.1.6" */
373 	UINT8	OptRomVersion[EXT_DEF_MAX_STR_SIZE];	/* 128; "1.44" */
374 	UINT8	Reserved[32];				/* 32 */
375 } EXT_HBA_NODE, *PEXT_HBA_NODE;				/* 696 */
376 
377 /* HBA node query interface type */
378 #define	EXT_DEF_FC_INTF_TYPE			1
379 #define	EXT_DEF_SCSI_INTF_TYPE			2
380 #define	EXT_DEF_VIRTUAL_FC_INTF_TYPE		3
381 
382 typedef struct _EXT_HBA_PORT {
383 	UINT64	Target;				/* 8 */
384 	UINT32	PortSupportedSpeed;		/* 4 */
385 	UINT32	PortSpeed;			/* 4 */
386 	UINT16	Type;				/* 2; Port Type */
387 	UINT16	State;				/* 2; Port State */
388 	UINT16	Mode;				/* 2 */
389 	UINT16	DiscPortCount;			/* 2 */
390 	UINT16	DiscPortNameType;		/* 2; USE_NODE_NAME or */
391 						/* USE_PORT_NAME */
392 	UINT16	DiscTargetCount;		/* 2 */
393 	UINT16	Bus;				/* 2 */
394 	UINT16	Lun;				/* 2 */
395 	UINT8	WWPN[EXT_DEF_WWN_NAME_SIZE];	/* 8 */
396 	UINT8	Id[EXT_DEF_PORTID_SIZE];	/* 4; 3 bytes valid Port Id. */
397 	UINT8	PortSupportedFC4Types;		/* 1 */
398 	UINT8	PortActiveFC4Types;		/* 1 */
399 	UINT8	FabricName[EXT_DEF_WWN_NAME_SIZE];	/* 8 */
400 	UINT16	LinkState2;			/* 2; sfp status */
401 	UINT16	LinkState3;			/* 2; reserved field */
402 	UINT8	Reserved[6];			/* 6 */
403 } EXT_HBA_PORT, *PEXT_HBA_PORT;			/* 64 */
404 
405 /* FC-4 Instrumentation */
406 typedef struct _EXT_HBA_FC4Statistics {
407 	INT64	InputRequests;			/* 8  */
408 	INT64	OutputRequests;			/* 8  */
409 	INT64	ControlRequests;		/* 8  */
410 	INT64	InputMegabytes;			/* 8  */
411 	INT64	OutputMegabytes;		/* 8  */
412 	UINT64	Reserved[6];			/* 48 */
413 } EXT_HBA_FC4STATISTICS, *PEXT_HBA_FC4STATISTICS;	/* 88 */
414 
415 typedef struct _EXT_LOOPBACK_REQ {
416 	UINT32	TransferCount;
417 	UINT32	IterationCount;
418 	UINT32	BufferAddress;
419 	UINT32	BufferLength;
420 	UINT16	Options;
421 	UINT8	Reserved[18];
422 } EXT_LOOPBACK_REQ, *PEXT_LOOPBACK_REQ;
423 
424 typedef struct _EXT_LOOPBACK_RSP {
425 	UINT64	BufferAddress;
426 	UINT32	BufferLength;
427 	UINT32	IterationCountLastError;
428 	UINT16	CompletionStatus;
429 	UINT16	CrcErrorCount;
430 	UINT16	DisparityErrorCount;
431 	UINT16	FrameLengthErrorCount;
432 	UINT8	CommandSent;
433 	UINT8	Reserved[15];
434 } EXT_LOOPBACK_RSP, *PEXT_LOOPBACK_RSP;
435 
436 /* used with loopback response CommandSent */
437 #define	INT_DEF_LB_LOOPBACK_CMD		0
438 #define	INT_DEF_LB_ECHO_CMD		1
439 
440 /* definition for interpreting CompletionStatus values */
441 #define	EXT_DEF_LB_COMPLETE	0x4000
442 #define	EXT_DEF_LB_PARAM_ERR	0x4006
443 #define	EXT_DEF_LB_LOOP_DOWN	0x400b
444 #define	EXT_DEF_LB_CMD_ERROR	0x400c
445 
446 /* port type */
447 #define	EXT_DEF_INITIATOR_DEV	0x1
448 #define	EXT_DEF_TARGET_DEV	0x2
449 #define	EXT_DEF_TAPE_DEV	0x4
450 #define	EXT_DEF_FABRIC_DEV	0x8
451 
452 
453 /* HBA port state */
454 #define	EXT_DEF_HBA_OK		0
455 #define	EXT_DEF_HBA_SUSPENDED	1
456 #define	EXT_DEF_HBA_LOOP_DOWN	2
457 
458 /* Connection mode */
459 #define	EXT_DEF_UNKNOWN_MODE	0
460 #define	EXT_DEF_P2P_MODE	1
461 #define	EXT_DEF_LOOP_MODE	2
462 #define	EXT_DEF_FL_MODE		3
463 #define	EXT_DEF_N_MODE		4
464 
465 /* Valid name type for Disc. port/target */
466 #define	EXT_DEF_USE_NODE_NAME	1
467 #define	EXT_DEF_USE_PORT_NAME	2
468 
469 /* FC4 type values */
470 #define	EXT_DEF_FC4_TYPE_SCSI	0x1
471 #define	EXT_DEF_FC4_TYPE_IP	0x2
472 #define	EXT_DEF_FC4_TYPE_SCTP	0x4
473 #define	EXT_DEF_FC4_TYPE_VI	0x8
474 
475 /* IIDMA rate values */
476 #define	IIDMA_RATE_1GB		0x0
477 #define	IIDMA_RATE_2GB		0x1
478 #define	IIDMA_RATE_4GB		0x3
479 #define	IIDMA_RATE_8GB		0x4
480 #define	IIDMA_RATE_10GB		0x13
481 #define	IIDMA_RATE_UNKNOWN	0xffff
482 
483 /* IIDMA Mode values */
484 #define	IIDMA_MODE_0		0
485 #define	IIDMA_MODE_1		1
486 #define	IIDMA_MODE_2		2
487 #define	IIDMA_MODE_3		3
488 
489 /* Port Speed values */
490 #define	EXT_DEF_PORTSPEED_UNKNOWN 	0x0
491 #define	EXT_DEF_PORTSPEED_1GBIT		0x1
492 #define	EXT_DEF_PORTSPEED_2GBIT		0x2
493 #define	EXT_DEF_PORTSPEED_4GBIT		0x4
494 #define	EXT_DEF_PORTSPEED_8GBIT		0x8
495 #define	EXT_DEF_PORTSPEED_10GBIT	0x10
496 #define	EXT_PORTSPEED_NOT_NEGOTIATED	(1<<15)	/* Speed not established */
497 
498 typedef struct _EXT_DISC_PORT {
499 	UINT64	TargetId;		/* 8 */
500 	UINT16	Type;			/* 2; Port Type */
501 	UINT16	Status;			/* 2; Port Status */
502 	UINT16	Bus;			/* 2; n/a for Solaris */
503 	UINT16	LoopID;			/* 2; Loop ID */
504 	UINT8	WWNN[EXT_DEF_WWN_NAME_SIZE];	/* 8 */
505 	UINT8	WWPN[EXT_DEF_WWN_NAME_SIZE];	/* 8 */
506 	UINT8	Id[EXT_DEF_PORTID_SIZE];	/* 4; 3 bytes used big endian */
507 	UINT8	Local;			/* 1; Local or Remote */
508 	UINT8	Reserved[27];		/* 27 */
509 } EXT_DISC_PORT, *PEXT_DISC_PORT;	/* 64 */
510 
511 typedef struct _EXT_DISC_TARGET {
512 	UINT64	TargetId;		/* 8 */
513 	UINT16	Type;			/* 2; Target Type */
514 	UINT16	Status;			/* 2; Target Status */
515 	UINT16	Bus;			/* 2; n/a for Solaris */
516 	UINT16	LunCount;		/* 2; n/a for nt */
517 	UINT16	LoopID;			/* 2; Loop ID */
518 	UINT8	WWNN[EXT_DEF_WWN_NAME_SIZE];	/* 8 */
519 	UINT8	WWPN[EXT_DEF_WWN_NAME_SIZE];	/* 8 */
520 	UINT8	Id[EXT_DEF_PORTID_SIZE];	/* 4; 3 bytes used big endian */
521 	UINT8	Local;			/* 1; Local or Remote */
522 	UINT8	Reserved[25];		/* 25 */
523 } EXT_DISC_TARGET, *PEXT_DISC_TARGET;	/* 64 */
524 
525 /* The following command is not supported */
526 typedef struct _EXT_DISC_LUN {	/* n/a for nt */
527 	UINT16	Id;		/* 2 */
528 	UINT16	State;		/* 2 */
529 	UINT16	IoCount;	/* 2 */
530 	UINT8	Reserved[30];	/* 30 */
531 } EXT_DISC_LUN, *PEXT_DISC_LUN;	/* 36 */
532 
533 
534 /* SCSI address */
535 typedef struct _EXT_SCSI_ADDR {
536 	UINT64	Target;			/* 8 */
537 	UINT16	Bus;			/* 2 */
538 	UINT16	Lun;			/* 2 */
539 	UINT8	Padding[12];		/* 12 */
540 } EXT_SCSI_ADDR, *PEXT_SCSI_ADDR;	/* 24 */
541 
542 
543 /* Fibre Channel address */
544 typedef struct _EXT_FC_ADDR {
545 	UINT16	Type;					/* 2 */
546 	union {
547 		UINT8	WWNN[EXT_DEF_WWN_NAME_SIZE];	/* 8 */
548 		UINT8	WWPN[EXT_DEF_WWN_NAME_SIZE];	/* 8 */
549 		UINT8	Id[EXT_DEF_PORTID_SIZE];	/* 4 */
550 	} FcAddr;
551 	UINT8	Padding[4];				/* 4 */
552 } EXT_FC_ADDR, *PEXT_FC_ADDR;				/* 14 */
553 
554 #define	EXT_DEF_TYPE_WWNN	1
555 #define	EXT_DEF_TYPE_WWPN	2
556 #define	EXT_DEF_TYPE_PORTID	3
557 #define	EXT_DEF_TYPE_FABRIC	4
558 
559 /* Destination address */
560 typedef struct _EXT_DEST_ADDR {
561 	union {
562 		struct {
563 			UINT64	Target;			/* 8 */
564 			UINT16	Bus;			/* 2 */
565 			UINT8	pad[6];			/* 6 */
566 		} ScsiAddr;
567 		UINT8	WWNN[EXT_DEF_WWN_NAME_SIZE];	/* 8 */
568 		UINT8	WWPN[EXT_DEF_WWN_NAME_SIZE];	/* 8 */
569 		UINT8	Id[EXT_DEF_PORTID_SIZE];	/* 4 */
570 	} DestAddr;
571 	UINT16	DestType;				/* 2 */
572 	UINT16	Lun;					/* 2 */
573 	UINT8	Padding[4];				/* 4 */
574 } EXT_DEST_ADDR, *PEXT_DEST_ADDR;			/* 24 */
575 
576 
577 #define	EXT_DEF_DESTTYPE_WWNN		1
578 #define	EXT_DEF_DESTTYPE_WWPN		2
579 #define	EXT_DEF_DESTTYPE_PORTID		3
580 #define	EXT_DEF_DESTTYPE_FABRIC		4
581 #define	EXT_DEF_DESTTYPE_SCSI		5
582 
583 /* Statistic */
584 typedef struct _EXT_HBA_PORT_STAT {
585 	UINT32	ControllerErrorCount;		/* 4 */
586 	UINT32	DeviceErrorCount;		/* 4 */
587 	UINT32	IoCount;			/* 4 */
588 	UINT32	MBytesCount;			/* 4; MB of data processed */
589 	UINT32	LipResetCount;			/* 4; Total no. of LIP Reset */
590 	UINT32	InterruptCount;			/* 4; Total no. of Interrupts */
591 	UINT32	LinkFailureCount;		/* 4 */
592 	UINT32	LossOfSyncCount;		/* 4 */
593 	UINT32	LossOfSignalsCount;		/* 4 */
594 	UINT32	PrimitiveSeqProtocolErrorCount;	/* 4 */
595 	UINT32	InvalidTransmissionWordCount;	/* 4 */
596 	UINT32	InvalidCRCCount;		/* 4 */
597 	UINT8	Reserved[64];			/* 64 */
598 } EXT_HBA_PORT_STAT, *PEXT_HBA_PORT_STAT;	/* 112 */
599 
600 
601 /* Driver property */
602 typedef struct _EXT_DRIVER {
603 	UINT32	MaxTransferLen;			/* 4 */
604 	UINT32	MaxDataSegments;		/* 4 */
605 	UINT32	Attrib;				/* 4 */
606 	UINT32	InternalFlags[4];		/* 16 */
607 	UINT16	NumOfBus;			/* 2; Port Type */
608 	UINT16	TargetsPerBus;			/* 2; Port Status */
609 	UINT16	LunsPerTarget;			/* 2 */
610 	UINT16	DmaBitAddresses;		/* 2 */
611 	UINT16	IoMapType;			/* 2 */
612 	UINT8	Version[EXT_DEF_MAX_STR_SIZE];	/* 128 */
613 	UINT8	Reserved[32];			/* 32 */
614 } EXT_DRIVER, *PEXT_DRIVER;			/* 198 */
615 
616 
617 /* Firmware property */
618 typedef struct _EXT_FW {
619 	UINT32	Attrib;				/* 4 */
620 	UINT8	Version[EXT_DEF_MAX_STR_SIZE];	/* 128 */
621 	UINT8	Reserved[66];			/* 66 */
622 } EXT_FW, *PEXT_FW;				/* 198 */
623 
624 /* ISP/Chip property */
625 typedef struct _EXT_CHIP {
626 	UINT32	IoAddr;		/* 4 */
627 	UINT32	IoAddrLen;	/* 4 */
628 	UINT32	MemAddr;	/* 4 */
629 	UINT32	MemAddrLen;	/* 4 */
630 	UINT16	VendorId;	/* 2 */
631 	UINT16	DeviceId;	/* 2 */
632 	UINT16	SubVendorId;	/* 2 */
633 	UINT16	SubSystemId;	/* 2 */
634 	UINT16	PciBusNumber;	/* 2 */
635 	UINT16	PciSlotNumber;	/* 2 */
636 	UINT16	ChipType;	/* 2 */
637 	UINT16	InterruptLevel;	/* 2 */
638 	UINT16	OutMbx[8];	/* 16 */
639 	UINT16	FuncNo;		/* 2 */
640 	UINT8	Reserved[29];	/* 29 */
641 	UINT8	ChipRevID;	/* 1 */
642 } EXT_CHIP, *PEXT_CHIP;		/* 80 */
643 
644 /* CNA properties */
645 typedef struct _EXT_CNA_PORT {
646 	UINT16	VLanId;						/* 2 */
647 	UINT8	VNPortMACAddress[EXT_DEF_MAC_ADDRESS_SIZE];	/* 6 */
648 	UINT16	FabricParam;					/* 2 */
649 	UINT16	Reserved0;					/* 2 */
650 	UINT32	Reserved[29];					/* 116 */
651 } EXT_CNA_PORT, *PEXT_CNA_PORT;					/* 128 */
652 
653 /* Fabric Parameters */
654 #define	EXT_DEF_MAC_ADDR_MODE_FPMA	0x8000
655 
656 /* Request Buffer for RNID */
657 typedef struct _EXT_RNID_REQ {
658 	EXT_FC_ADDR	Addr;				/* 14 */
659 	UINT8		DataFormat;			/* 1 */
660 	UINT8		Pad;				/* 1 */
661 	UINT8		OptWWN[EXT_DEF_WWN_NAME_SIZE];	/* 8 */
662 	UINT8		OptPortId[EXT_DEF_PORTID_SIZE];	/* 4 */
663 	UINT8		Reserved[51];			/* 51 */
664 } EXT_RNID_REQ, *PEXT_RNID_REQ;				/* 79 */
665 
666 #define	EXT_DEF_RNID_DFORMAT_NONE	0
667 #define	EXT_DEF_RNID_DFORMAT_TOPO_DISC	0xDF
668 
669 /* Request Buffer for Set RNID */
670 typedef struct _EXT_SET_RNID_REQ {
671 	UINT8	IPVersion[2];		/*  2 */
672 	UINT8	UDPPortNumber[2];	/*  2 */
673 	UINT8	IPAddress[16];		/* 16 */
674 	UINT8	Reserved[64];		/* 64 */
675 } EXT_SET_RNID_REQ, *PEXT_SET_RNID_REQ; /* 84 */
676 
677 /* RNID definition and data struct */
678 #define	SEND_RNID_RSP_SIZE  72
679 
680 typedef struct _RNID_DATA
681 {
682 	UINT32	UnitType;		/* 4 */
683 	UINT32	NumOfAttachedNodes;	/* 4 */
684 	UINT16	TopoDiscFlags;		/* 2 */
685 	UINT16	Reserved;		/* 2 */
686 	UINT8	WWN[16];		/* 16 */
687 	UINT8	PortId[4];		/* 4 */
688 	UINT8	IPVersion[2];		/* 2 */
689 	UINT8	UDPPortNumber[2];	/* 2 */
690 	UINT8	IPAddress[16];		/* 16 */
691 } EXT_RNID_DATA, *PEXT_RNID_DATA;	/* 52 */
692 
693 
694 /* SCSI pass-through */
695 typedef struct _EXT_SCSI_PASSTHRU {
696 	EXT_SCSI_ADDR	TargetAddr;
697 	UINT8		Direction;
698 	UINT8		CdbLength;
699 	UINT8		Cdb[EXT_DEF_SCSI_PASSTHRU_CDB_LENGTH];
700 	UINT8		Reserved[66];
701 	UINT8		SenseData[256];
702 } EXT_SCSI_PASSTHRU, *PEXT_SCSI_PASSTHRU;
703 
704 /* FC SCSI pass-through */
705 typedef struct _EXT_FC_SCSI_PASSTHRU {
706 	EXT_DEST_ADDR	FCScsiAddr;
707 	UINT8		Direction;
708 	UINT8		CdbLength;
709 	UINT8		Cdb[EXT_DEF_SCSI_PASSTHRU_CDB_LENGTH];
710 	UINT8		Reserved[64];
711 	UINT8		SenseData[256];
712 } EXT_FC_SCSI_PASSTHRU, *PEXT_FC_SCSI_PASSTHRU;
713 
714 /* SCSI pass-through direction */
715 #define	EXT_DEF_SCSI_PASSTHRU_DATA_IN		1
716 #define	EXT_DEF_SCSI_PASSTHRU_DATA_OUT		2
717 
718 
719 /* EXT_REG_AEN Request struct */
720 typedef struct _EXT_REG_AEN {
721 	UINT32	Enable;		/* 4; non-0 to enable, 0 to disable. */
722 	UINT8	Reserved[4];	/* 4 */
723 } EXT_REG_AEN, *PEXT_REG_AEN;	/* 8 */
724 
725 /* EXT_GET_AEN Response struct */
726 typedef struct _EXT_ASYNC_EVENT {
727 	UINT32	AsyncEventCode;		/* 4 */
728 	union {
729 		struct {
730 			UINT8 RSCNInfo[EXT_DEF_PORTID_SIZE_ACTUAL]; /* 3 BE */
731 			UINT8 AddrFormat;			/* 1 */
732 			UINT8 Rsvd_1[8];			/* 8 */
733 		} RSCN;
734 
735 		UINT8	Reserved[12];	/* 12 */
736 	} Payload;
737 } EXT_ASYNC_EVENT, *PEXT_ASYNC_EVENT;	/* 16 */
738 
739 
740 /* Asynchronous Event Codes */
741 #define	EXT_DEF_LIP_OCCURRED	0x8010
742 #define	EXT_DEF_LINK_UP		0x8011
743 #define	EXT_DEF_LINK_DOWN	0x8012
744 #define	EXT_DEF_LIP_RESET	0x8013
745 #define	EXT_DEF_RSCN		0x8015
746 #define	EXT_DEF_DEVICE_UPDATE	0x8014
747 
748 /* LED state information */
749 #define	EXT_DEF_GRN_BLINK_OFF	0x00
750 #define	EXT_DEF_GRN_BLINK_ON	0x01
751 
752 typedef struct _EXT_BEACON_CONTROL {
753 	UINT32	State;				/* 4  */
754 	UINT8	Reserved[12];			/* 12 */
755 } EXT_BEACON_CONTROL, *PEXT_BEACON_CONTROL;	/* 16 */
756 
757 /* Required # of entries in the queue buffer allocated. */
758 #define	EXT_DEF_MAX_AEN_QUEUE	EXT_DEF_MAX_AEN_QUEUE_OS
759 
760 /*
761  * LUN BitMask structure definition, array of 8bit bytes,
762  * 1 bit per lun.  When bit == 1, the lun is masked.
763  * Most significant bit of mask[0] is lun 0.
764  * Least significant bit of mask[0] is lun 7.
765  */
766 typedef struct _EXT_LUN_BIT_MASK {
767 #if ((EXT_DEF_NON_SCSI3_MAX_LUN & 0x7) == 0)
768 	UINT8	mask[EXT_DEF_NON_SCSI3_MAX_LUN >> 3];
769 #else
770 	UINT8	mask[(EXT_DEF_NON_SCSI3_MAX_LUN + 8) >> 3 ];
771 #endif
772 } EXT_LUN_BIT_MASK, *PEXT_LUN_BIT_MASK;
773 
774 /* Device type to get for EXT_SC_GET_PORT_SUMMARY */
775 #define	EXT_DEF_GET_KNOWN_DEVICE	0x1
776 #define	EXT_DEF_GET_VISIBLE_DEVICE	0x2
777 #define	EXT_DEF_GET_HIDDEN_DEVICE	0x4
778 #define	EXT_DEF_GET_FABRIC_DEVICE	0x8
779 #define	EXT_DEF_GET_LOOP_DEVICE		0x10
780 
781 /* Each entry in device database */
782 typedef struct _EXT_DEVICEDATAENTRY
783 {
784 	EXT_SCSI_ADDR	TargetAddress;	/* scsi address */
785 	UINT32		DeviceFlags;	/* Flags for device */
786 	UINT16		LoopID;		/* Loop ID */
787 	UINT16		BaseLunNumber;
788 	UINT8		NodeWWN[8];	/* Node World Wide Name for device */
789 	UINT8		PortWWN[8];	/* Port World Wide Name for device */
790 	UINT8		PortID[3];	/* Current PortId for device */
791 	UINT8		ControlFlags;	/* Control flag */
792 	UINT8		Reserved[132];
793 } EXT_DEVICEDATAENTRY, *PEXT_DEVICEDATAENTRY;
794 
795 #define	EXT_DEF_EXTERNAL_LUN_COUNT		2048
796 #define	EXT_DEF_EXTERNAL_LUN_BITMASK_BYTES	(EXT_DEF_EXTERNAL_LUN_COUNT / 8)
797 
798 /* Structure as used in the IOCTL. */
799 
800 typedef struct _EXT_EXTERNAL_LUN_BITMASK_ENTRY
801 {
802 	UINT8	NodeName[EXT_DEF_WWN_NAME_SIZE];
803 	UINT8	PortName[EXT_DEF_WWN_NAME_SIZE];
804 	UINT8	Reserved1[16];		/* Pad to 32-byte header */
805 	UINT8	Bitmask[EXT_DEF_EXTERNAL_LUN_BITMASK_BYTES];
806 } EXT_EXTERNAL_LUN_BITMASK_ENTRY, *PEXT_EXTERNAL_LUN_BITMASK_ENTRY;
807 
808 
809 /* Structure as it is stored in the NT registry */
810 
811 typedef struct _LUN_BITMASK_LIST
812 {
813 	UINT16	Version;	/* Should be LUN_BITMASK_REGISTRY_VERSION */
814 	UINT16	EntryCount;	/* Count of variable entries following */
815 	UINT8	Reserved[28];	/* Pad to 32-byte header */
816 
817 	EXT_EXTERNAL_LUN_BITMASK_ENTRY
818 		BitmaskEntry[1]; /* Var-length data */
819 } EXT_LUN_BITMASK_LIST, *PEXT_LUN_BITMASK_LIST;
820 
821 
822 /* Device database information */
823 typedef struct _EXT_DEVICEDATA
824 {
825 	UINT32	TotalDevices;		/* Set to total number of device */
826 	UINT32	ReturnListEntryCount;	/* Set to number of device entries */
827 					/* returned in list. */
828 
829 	EXT_DEVICEDATAENTRY  EntryList[1]; /* Variable length */
830 } EXT_DEVICEDATA, *PEXT_DEVICEDATA;
831 
832 
833 /* Swap Target Device Data structure */
834 typedef struct _EXT_SWAPTARGETDEVICE
835 {
836 	EXT_DEVICEDATAENTRY	CurrentExistDevice;
837 	EXT_DEVICEDATAENTRY	NewDevice;
838 } EXT_SWAPTARGETDEVICE, *PEXT_SWAPTARGETDEVICE;
839 
840 #define	EXT_DEF_LUN_BITMASK_LIST_MIN_ENTRIES	1
841 #define	EXT_DEF_LUN_BITMASK_LIST_MAX_ENTRIES	256
842 
843 #ifdef _WIN64
844 #define	EXT_DEF_LUN_BITMASK_LIST_HEADER_SIZE	32
845 #else
846 #define	EXT_DEF_LUN_BITMASK_LIST_HEADER_SIZE \
847     offsetof(LUN_BITMASK_LIST_BUFFER, asBitmaskEntry)
848 #endif
849 
850 #define	EXT_DEF_LUN_BITMASK_LIST_MIN_SIZE   \
851 	(EXT_DEF_LUN_BITMASK_LIST_HEADER_SIZE + \
852 	(sizeof (EXT_EXTERNAL_LUN_BITMASK_ENTRY) * \
853 	EXT_DEF_LUN_BITMASK_LIST_MIN_ENTRIES))
854 #define	EXT_DEF_LUN_BITMASK_LIST_MAX_SIZE   \
855 	(EXT_DEF_LUN_BITMASK_LIST_HEADER_SIZE + \
856 	(sizeof (EXT_EXTERNAL_LUN_BITMASK_ENTRY) * \
857 	EXT_DEF_LUN_BITMASK_LIST_MAX_ENTRIES))
858 /*
859  * LUN mask bit manipulation macros
860  *
861  *   P = Pointer to an EXT_LUN_BIT_MASK union.
862  *   L = LUN number.
863  */
864 #define	EXT_IS_LUN_BIT_SET(P, L) \
865 	(((P)->mask[L / 8] & (0x80 >> (L % 8))) ? 1 : 0)
866 
867 #define	EXT_SET_LUN_BIT(P, L) \
868 	((P)->mask[L / 8] |= (0x80 >> (L % 8)))
869 
870 #define	EXT_CLR_LUN_BIT(P, L) \
871 	((P)->mask[L / 8] &= ~(0x80 >> (L % 8)))
872 
873 typedef struct _EXT_PORT_PARAM {
874 	EXT_DEST_ADDR	FCScsiAddr;
875 	UINT16		Mode;
876 	UINT16		Speed;
877 } EXT_PORT_PARAM, *PEXT_PORT_PARAM;
878 
879 #define	EXT_IIDMA_MODE_GET	0
880 #define	EXT_IIDMA_MODE_SET	1
881 
882 /*
883  * PCI header structure definitions.
884  */
885 
886 typedef struct _PCI_HEADER_T {
887 	UINT8	signature[2];
888 	UINT8	reserved[0x16];
889 	UINT8	dataoffset[2];
890 	UINT8	pad[6];
891 } PCI_HEADER_T, *PPCI_HEADER_T;
892 
893 /*
894  * PCI data structure definitions.
895  */
896 typedef struct _PCI_DATA_T {
897 	UINT8	signature[4];
898 	UINT8	vid[2];
899 	UINT8	did[2];
900 	UINT8	reserved0[2];
901 	UINT8	pcidatalen[2];
902 	UINT8	pcidatarev;
903 	UINT8	classcode[3];
904 	UINT8	imagelength[2];   /* In sectors */
905 	UINT8	revisionlevel[2];
906 	UINT8	codetype;
907 	UINT8	indicator;
908 	UINT8	reserved1[2];
909 	UINT8	pad[8];
910 } PCI_DATA_T, *PPCI_DATA_T;
911 
912 /*
913  * Mercury/Menlo
914  */
915 
916 #define	MENLO_RESET_FLAG_ENABLE_DIAG_FW	1
917 
918 typedef struct _EXT_MENLO_RESET {
919 	UINT16	Flags;
920 	UINT16	Reserved;
921 } EXT_MENLO_RESET, *PEXT_MENLO_RESET;
922 
923 typedef struct _EXT_MENLO_GET_FW_VERSION {
924 	UINT32	FwVersion;
925 } EXT_MENLO_GET_FW_VERSION, *PEXT_MENLO_GET_FW_VERSION;
926 
927 #define	MENLO_UPDATE_FW_FLAG_DIAG_FW	0x0008  /* if flag is cleared then */
928 						/* it must be an fw op */
929 typedef struct _EXT_MENLO_UPDATE_FW {
930 	UINT64	pFwDataBytes;
931 	UINT32	TotalByteCount;
932 	UINT16	Flags;
933 	UINT16	Reserved;
934 } EXT_MENLO_UPDATE_FW, *PEXT_MENLO_UPDATE_FW;
935 
936 #define	CONFIG_PARAM_ID_RESERVED	1
937 #define	CONFIG_PARAM_ID_UIF		2
938 #define	CONFIG_PARAM_ID_FCOE_COS	3
939 #define	CONFIG_PARAM_ID_PAUSE_TYPE	4
940 #define	CONFIG_PARAM_ID_TIMEOUTS	5
941 
942 #define	INFO_DATA_TYPE_CONFIG_LOG_DATA	1	/* Fetch Config Log Data */
943 #define	INFO_DATA_TYPE_LOG_DATA		2	/* Fetch Log Data */
944 #define	INFO_DATA_TYPE_PORT_STATISTICS	3	/* Fetch Port Statistics */
945 #define	INFO_DATA_TYPE_LIF_STATISTICS	4	/* Fetch LIF Statistics */
946 #define	INFO_DATA_TYPE_ASIC_STATISTICS	5	/* Fetch ASIC Statistics */
947 #define	INFO_DATA_TYPE_CONFIG_PARAMETERS 6	/* Fetch Config Parameters */
948 #define	INFO_DATA_TYPE_PANIC_LOG	7	/* Fetch Panic Log */
949 
950 /*
951  * InfoContext defines for INFO_DATA_TYPE_LOG_DATA
952  */
953 #define	IC_LOG_DATA_LOG_ID_DEBUG_LOG			0
954 #define	IC_LOG_DATA_LOG_ID_LEARN_LOG			1
955 #define	IC_LOG_DATA_LOG_ID_FC_ACL_INGRESS_LOG		2
956 #define	IC_LOG_DATA_LOG_ID_FC_ACL_EGRESS_LOG		3
957 #define	IC_LOG_DATA_LOG_ID_ETHERNET_ACL_INGRESS_LOG	4
958 #define	IC_LOG_DATA_LOG_ID_ETHERNET_ACL_EGRESS_LOG	5
959 #define	IC_LOG_DATA_LOG_ID_MESSAGE_TRANSMIT_LOG		6
960 #define	IC_LOG_DATA_LOG_ID_MESSAGE_RECEIVE_LOG		7
961 #define	IC_LOG_DATA_LOG_ID_LINK_EVENT_LOG		8
962 #define	IC_LOG_DATA_LOG_ID_DCX_LOG			9
963 
964 /*
965  * InfoContext defines for INFO_DATA_TYPE_PORT_STATISTICS
966  */
967 #define	IC_PORT_STATISTICS_PORT_NUMBER_ETHERNET_PORT0	0
968 #define	IC_PORT_STATISTICS_PORT_NUMBER_ETHERNET_PORT1	1
969 #define	IC_PORT_STATISTICS_PORT_NUMBER_NSL_PORT0	2
970 #define	IC_PORT_STATISTICS_PORT_NUMBER_NSL_PORT1	3
971 #define	IC_PORT_STATISTICS_PORT_NUMBER_FC_PORT0		4
972 #define	IC_PORT_STATISTICS_PORT_NUMBER_FC_PORT1		5
973 
974 /*
975  * InfoContext defines for INFO_DATA_TYPE_LIF_STATISTICS
976  */
977 #define	IC_LIF_STATISTICS_LIF_NUMBER_ETHERNET_PORT0	0
978 #define	IC_LIF_STATISTICS_LIF_NUMBER_ETHERNET_PORT1	1
979 #define	IC_LIF_STATISTICS_LIF_NUMBER_FC_PORT0		2
980 #define	IC_LIF_STATISTICS_LIF_NUMBER_FC_PORT1		3
981 #define	IC_LIF_STATISTICS_LIF_NUMBER_CPU		6
982 
983 typedef struct _EXT_MENLO_ACCESS_PARAMETERS {
984 	union {
985 		struct {
986 			UINT32 StartingAddr;
987 			UINT32 Reserved2;
988 			UINT32 Reserved3;
989 		} MenloMemory;		/* For Read & Write Menlo Memory */
990 
991 		struct {
992 			UINT32 ConfigParamID;
993 			UINT32 ConfigParamData0;
994 			UINT32 ConfigParamData1;
995 		} MenloConfig;		/* For change Configuration */
996 
997 		struct {
998 			UINT32 InfoDataType;
999 			UINT32 InfoContext;
1000 			UINT32 Reserved;
1001 		} MenloInfo;		/* For fetch Menlo Info */
1002 	} ap;
1003 } EXT_MENLO_ACCESS_PARAMETERS, *PEXT_MENLO_ACCESS_PARAMETERS;
1004 
1005 #define	INFO_DATA_TYPE_LOG_CONFIG_TBC		((10*7)+1)*4
1006 #define	INFO_DATA_TYPE_PORT_STAT_ETH_TBC	0x194
1007 #define	INFO_DATA_TYPE_PORT_STAT_FC_TBC		0xC0
1008 #define	INFO_DATA_TYPE_LIF_STAT_TBC		0x40
1009 #define	INFO_DATA_TYPE_ASIC_STAT_TBC		0x5F8
1010 #define	INFO_DATA_TYPE_CONFIG_TBC		0x140
1011 
1012 #define	MENLO_OP_READ_MEM	0	/* Read Menlo Memory */
1013 #define	MENLO_OP_WRITE_MEM	1	/* Write Menlo Memory */
1014 #define	MENLO_OP_CHANGE_CONFIG	2	/* Change Configuration */
1015 #define	MENLO_OP_GET_INFO	3	/* Fetch Menlo Info (Logs, & */
1016 					/* Statistics, Configuration) */
1017 
1018 typedef struct _EXT_MENLO_MANAGE_INFO {
1019 	UINT64				pDataBytes;	/* 8 */
1020 	EXT_MENLO_ACCESS_PARAMETERS	Parameters;	/* 12 */
1021 	UINT32				TotalByteCount;	/* 4 */
1022 	UINT16				Operation;	/* 2 */
1023 	UINT16				Reserved;	/* 2 */
1024 	UINT16				Reserved1[2];	/* 4 */
1025 } EXT_MENLO_MANAGE_INFO, *PEXT_MENLO_MANAGE_INFO;
1026 
1027 #define	MENLO_FC_CHECKSUM_FAILURE	0x01
1028 #define	MENLO_FC_INVALID_LENGTH		0x02
1029 #define	MENLO_FC_INVALID_ADDRESS	0x04
1030 #define	MENLO_FC_INVALID_CONFIG_ID_TYPE	0x05
1031 #define	MENLO_FC_INVALID_CONFIG_DATA	0x06
1032 #define	MENLO_FC_INVALID_INFO_CONTEXT	0x07
1033 
1034 typedef struct _EXT_MENLO_MGT {
1035 	union {
1036 		EXT_MENLO_RESET			MenloReset;
1037 		EXT_MENLO_GET_FW_VERSION	MenloGetFwVer;
1038 		EXT_MENLO_UPDATE_FW		MenloUpdateFw;
1039 		EXT_MENLO_MANAGE_INFO		MenloManageInfo;
1040 	} sp;
1041 } EXT_MENLO_MGT, *PEXT_MENLO_MGT;
1042 
1043 /*
1044  * vport enum definations
1045  */
1046 typedef enum vport_options {
1047 	EXT_VPO_LOGIN_RETRY_ENABLE = 0,
1048 	EXT_VPO_PERSISTENT = 1,
1049 	EXT_VPO_QOS_BW = 2,
1050 	EXT_VPO_VFABRIC_ENABLE = 3
1051 } vport_options_t;
1052 
1053 /*
1054  * vport struct definations
1055  */
1056 #define	MAX_DEV_PATH			256
1057 #define	MAX_VP_ID			256
1058 #define	EXT_OLD_VPORT_ID_CNT_SIZE	260
1059 typedef struct _EXT_VPORT_ID_CNT {
1060 	UINT32	VpCnt;
1061 	UINT8	VpId[MAX_VP_ID];
1062 	UINT8	vp_path[MAX_VP_ID][MAX_DEV_PATH];
1063 	INT32	VpDrvInst[MAX_VP_ID];
1064 } EXT_VPORT_ID_CNT, *PEXT_VPORT_ID_CNT;
1065 
1066 typedef struct _EXT_VPORT_PARAMS {
1067 	UINT32		vp_id;
1068 	vport_options_t	options;
1069 	UINT8		wwpn[EXT_DEF_WWN_NAME_SIZE];
1070 	UINT8		wwnn[EXT_DEF_WWN_NAME_SIZE];
1071 } EXT_VPORT_PARAMS, *PEXT_VPORT_PARAMS;
1072 
1073 typedef struct _EXT_VPORT_INFO {
1074 	UINT32		free;
1075 	UINT32		used;
1076 	UINT32		id;
1077 	UINT32		state;
1078 	UINT32		bound;
1079 	UINT8		wwnn[EXT_DEF_WWN_NAME_SIZE];
1080 	UINT8		wwpn[EXT_DEF_WWN_NAME_SIZE];
1081 	UINT8		reserved[220];
1082 } EXT_VPORT_INFO, *PEXT_VPORT_INFO;
1083 
1084 #ifdef	__cplusplus
1085 }
1086 #endif
1087 
1088 #endif /* _EXIOCT_H */
1089