xref: /illumos-gate/usr/src/uts/common/sys/dcopy_device.h (revision 4eaa471005973e11a6110b69fe990530b3b95a38)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #ifndef _SYS_DCOPY_DEVICE_H
28 #define	_SYS_DCOPY_DEVICE_H
29 
30 #pragma ident	"%Z%%M%	%I%	%E% SMI"
31 
32 #ifdef __cplusplus
33 extern "C" {
34 #endif
35 
36 #include <sys/types.h>
37 #include <sys/dcopy.h>
38 
39 /*
40  * private command state. Space for this structure should be allocated during
41  * (*cb_cmd_alloc). The DMA driver must set dp_private in dcopy_cmd_t to point
42  * to the memory it allocated. Other than pr_device_cmd_private, the DMA driver
43  * should not touch any of the fields in this structure. pr_device_cmd_private
44  * is a private pointer for the DMA engine to use.
45  */
46 struct dcopy_cmd_priv_s {
47 	/*
48 	 * we only init the state used to track a command which blocks when it
49 	 * actually blocks. pr_block_init tells us when we need to clean it
50 	 * up during a cmd_free.
51 	 */
52 	boolean_t		pr_block_init;
53 
54 	/* dcopy_poll blocking state */
55 	list_node_t		pr_poll_list_node;
56 	volatile boolean_t	pr_wait;
57 	kmutex_t		pr_mutex;
58 	kcondvar_t		pr_cv;
59 
60 	/* back pointer to the command */
61 	dcopy_cmd_t		pr_cmd;
62 
63 	/* shortcut to the channel we're on */
64 	struct dcopy_channel_s	*pr_channel;
65 
66 	/* DMA driver private pointer */
67 	void			*pr_device_cmd_private;
68 };
69 
70 /* cb_version */
71 #define	DCOPY_DEVICECB_V0	0
72 
73 typedef struct dcopy_device_chaninfo_s {
74 	uint_t	di_chan_num;
75 } dcopy_device_chaninfo_t;
76 
77 typedef struct dcopy_device_cb_s {
78 	int	cb_version;
79 	int	cb_res1;
80 
81 	/* allocate/free a DMA channel. See dcopy.h for return status  */
82 	int	(*cb_channel_alloc)(void *device_private,
83 		    dcopy_handle_t handle, int flags, uint_t size,
84 		    dcopy_query_channel_t *info, void *channel_private);
85 	void	(*cb_channel_free)(void *channel_private);
86 
87 	/* allocate/free a command. See dcopy.h for return status  */
88 	int	(*cb_cmd_alloc)(void *channel_private, int flags,
89 		    dcopy_cmd_t *cmd);
90 	void	(*cb_cmd_free)(void *channel_private, dcopy_cmd_t *cmd);
91 
92 	/*
93 	 * post a command/poll for command status. See dcopy.h for return
94 	 * status
95 	 */
96 	int	(*cb_cmd_post)(void *channel_private, dcopy_cmd_t cmd);
97 	int	(*cb_cmd_poll)(void *channel_private, dcopy_cmd_t cmd);
98 
99 	/*
100 	 * if dcopy_device_unregister() returns DCOPY_PENDING, dcopy will
101 	 * call this routine when all the channels are no longer being
102 	 * used and have been free'd up. e.g. it's safe for the DMA driver
103 	 * to detach.
104 	 *   status = DCOPY_SUCCESS || DCOPY_FAILURE
105 	 */
106 	void	(*cb_unregister_complete)(void *device_private, int status);
107 } dcopy_device_cb_t;
108 
109 
110 typedef struct dcopy_device_info_s {
111 	dev_info_t		*di_dip;
112 	dcopy_device_cb_t	*di_cb; /* must be a static array */
113 	uint_t			di_num_dma;
114 	uint_t			di_maxxfer;
115 	uint_t			di_capabilities;
116 	uint64_t		di_id;
117 } dcopy_device_info_t;
118 
119 typedef struct dcopy_device_s *dcopy_device_handle_t;
120 
121 /* dcopy_device_notify() status */
122 #define	DCOPY_COMPLETION	0
123 
124 /*
125  * dcopy_device_register()
126  *   register the DMA device with dcopy.
127  *    return status => DCOPY_FAILURE, DCOPY_SUCCESS
128  */
129 int dcopy_device_register(void *device_private, dcopy_device_info_t *info,
130     dcopy_device_handle_t *handle);
131 
132 /*
133  * dcopy_device_unregister()
134  *   try to unregister the DMA device with dcopy. If the DMA engines are
135  *   still being used by upper layer modules, DCOPY_PENDING will be returned.
136  *    return status => DCOPY_FAILURE, DCOPY_SUCCESS, DCOPY_PENDING
137  *      if DCOPY_PENDING, (*cb_unregister_complete)() will be called when
138  *      completed.
139  */
140 int dcopy_device_unregister(dcopy_device_handle_t *handle);
141 
142 /*
143  * dcopy_device_channel_notify()
144  *   Notify dcopy of an event.
145  *     dcopy_handle_t handle => what was passed into (*cb_alloc)()
146  *     status => DCOPY_COMPLETION
147  */
148 void dcopy_device_channel_notify(dcopy_handle_t handle, int status);
149 
150 #ifdef __cplusplus
151 }
152 #endif
153 
154 #endif /* _SYS_DCOPY_DEVICE_H */
155