1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * Copyright 2004 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #pragma ident "%Z%%M% %I% %E% SMI" 28 29 /* 30 * Kernel protection serializers: general purpose synchronization mechanism. 31 * 32 * Serializers provide a simple way to serialize access to some resource. They 33 * can be used as an alternative to locks or STREAMS perimeters. They scale 34 * much better than STREAMS outer serializers. 35 * 36 * Serializer is an abstraction that guarantees that all functions executed 37 * within the serializer are serialized: they are executed in the order they 38 * entered serializer one at a time. 39 * 40 * INTERFACES: 41 * 42 * serializer_t *serializer_create(flags); 43 * 44 * Create a serializer. The flags may be either SER_SLEEP or SER_NOSLEEP 45 * which are the same as KM_SLEEP and KM_NOSLEEP respectively. 46 * 47 * serializer_enter(serializer, proc, mblk, arg); 48 * 49 * Execute 'proc(mblk, arg)' within the serializer. 50 * 51 * serializer_wait(serializer); 52 * 53 * Wait for pending serializer jobs to complete. This function should never 54 * be called within the serializer or it will deadlock. 55 * 56 * serializer_destroy(serializer); 57 * 58 * Destroy serializer. 59 * 60 * Serializers export three DTrace SDT probes: 61 * 62 * serializer-enqueue(serializer, mblk, arg, proc) 63 * 64 * The probe triggers when serializer is busy and the request is 65 * queued. 66 * 67 * serializer-exec-start(serializer, mblk, arg, proc) 68 * 69 * The probe triggers before the request is executed 70 * 71 * serializer-exec-end(serializer, mblk, arg, proc) 72 * 73 * The probe triggers after the request is executed 74 * 75 * 76 * IMPLEMENTATION. 77 * 78 * Serializer consists of a "owner" and a list of queued jobs. The first thread 79 * entering serializer sets the owner and executes its job directly without 80 * context switch. Then it processes jobs which may have been enqueued while it 81 * was executing a job and drops the owner, leaving the serializer empty. Any 82 * thread entering an owned serializer enqueues its job and returns immediately. 83 * 84 * Serializer data structure holds several fields used for debugging only. They 85 * are not relevant for the proper serializer functioning. 86 * 87 * When new requests arrive faster then they are processed it is possible that a 88 * thread that started processing serializer will continue doing so for a long 89 * time. To avoid such pathological behavior the amount of requests drained by 90 * serializer_enter() is limited by `serializer_credit' value. After the credit 91 * is expired serializer_enter() schedules a taskq request to continue draining. 92 * The taskq thread draining is not limited by serializer_credit. Note that it 93 * is possible that another serializer_enter() will drain the serializer before 94 * a taskq thread will get to it. 95 */ 96 97 #include <sys/types.h> 98 #include <sys/kmem.h> 99 #include <sys/thread.h> 100 #include <sys/mutex.h> 101 #include <sys/systm.h> 102 #include <sys/debug.h> 103 #include <sys/taskq.h> 104 #include <sys/sdt.h> 105 #include <sys/serializer.h> 106 107 #define SERIALIZER_NAMELEN 31 108 109 /* 110 * Serializer abstraction. 111 * Fields marked (D) are used for debugging purposes only. 112 */ 113 struct serializer_s { 114 kmutex_t ser_lock; /* Protects state and the list */ 115 kthread_t *ser_owner; /* Thread executing serializer */ 116 ushort_t ser_taskq; /* Serializer scheduled for taskq */ 117 kcondvar_t ser_cv; /* For serializer-wait */ 118 uint_t ser_count; /* # of queued requests (D) */ 119 mblk_t *ser_first; /* First message in the queue */ 120 mblk_t *ser_last; /* Last message in the queue */ 121 srproc_t *ser_proc; /* Currently executing proc (D) */ 122 mblk_t *ser_curr; /* Currently executing msg (D) */ 123 void *ser_arg; /* Currently executing arg (D) */ 124 }; 125 126 static kmem_cache_t *serializer_cache; 127 128 /* 129 * How many drains are allowed before we switch to taskq processing. 130 */ 131 #define SERIALIZER_CREDIT 10 132 static int serializer_credit = SERIALIZER_CREDIT; 133 134 /* Statistics for debugging */ 135 static int perim_context_swtch = 0; 136 137 static int serializer_constructor(void *, void *, int); 138 static void serializer_destructor(void *, void *); 139 static void serializer_exec(serializer_t *, srproc_t, mblk_t *, void *); 140 static void serializer_enqueue(serializer_t *, srproc_t, mblk_t *, void *); 141 static void serializer_drain(serializer_t *, int); 142 static void serializer_drain_completely(serializer_t *); 143 144 /* 145 * SERIALIZER Implementation. 146 */ 147 148 /* 149 * Record debugging information and execute single request. 150 */ 151 static void 152 serializer_exec(serializer_t *s, srproc_t proc, mblk_t *mp, void *arg) 153 { 154 ASSERT(MUTEX_NOT_HELD(&s->ser_lock)); 155 ASSERT(s->ser_owner == curthread); 156 157 ASSERT(proc != NULL); 158 ASSERT(mp != NULL); 159 160 s->ser_curr = mp; 161 s->ser_arg = arg; 162 s->ser_proc = proc; 163 proc(mp, arg); 164 } 165 166 /* 167 * Enqueue a single request on serializer. 168 */ 169 static void 170 serializer_enqueue(serializer_t *s, srproc_t proc, mblk_t *mp, void *arg) 171 { 172 ASSERT(MUTEX_HELD(&s->ser_lock)); 173 174 DTRACE_PROBE4(serializer__enqueue, serializer_t *, s, 175 mblk_t *, mp, void *, arg, srproc_t, proc); 176 s->ser_count++; 177 mp->b_queue = (queue_t *)proc; 178 mp->b_prev = (mblk_t *)arg; 179 if (s->ser_last != NULL) 180 s->ser_last->b_next = mp; 181 else 182 s->ser_first = mp; 183 s->ser_last = mp; 184 } 185 186 /* 187 * Drain serializer, limiting drain to `credit' requests at most. 188 */ 189 static void 190 serializer_drain(serializer_t *s, int credit) 191 { 192 mblk_t *mp = s->ser_first; 193 194 ASSERT(MUTEX_HELD(&s->ser_lock)); 195 ASSERT(s->ser_owner == curthread); 196 197 for (; mp != NULL && credit-- != 0; mp = s->ser_first) { 198 srproc_t *proc = (srproc_t *)mp->b_queue; 199 void *arg = mp->b_prev; 200 201 if ((s->ser_first = s->ser_first->b_next) == NULL) { 202 s->ser_last = NULL; 203 } else { 204 mp->b_next = NULL; 205 } 206 ASSERT(s->ser_count != 0); 207 s->ser_count--; 208 mp->b_queue = NULL; 209 mp->b_prev = NULL; 210 mutex_exit(&s->ser_lock); 211 212 DTRACE_PROBE4(serializer__exec__start, serializer_t *, s, 213 mblk_t *, mp, void *, arg, srproc_t, proc); 214 serializer_exec(s, proc, mp, arg); 215 DTRACE_PROBE4(serializer__exec__end, serializer_t *, s, 216 mblk_t *, mp, void *, arg, srproc_t, proc); 217 218 mutex_enter(&s->ser_lock); 219 } 220 } 221 222 /* 223 * Drain serializer completely if serializer is free. 224 */ 225 static void 226 serializer_drain_completely(serializer_t *s) 227 { 228 mutex_enter(&s->ser_lock); 229 ASSERT(s->ser_taskq); 230 if (s->ser_owner == NULL) { 231 s->ser_owner = curthread; 232 while (s->ser_first != NULL) 233 serializer_drain(s, INT_MAX); 234 s->ser_owner = NULL; 235 s->ser_curr = NULL; 236 s->ser_proc = NULL; 237 s->ser_arg = NULL; 238 } 239 s->ser_taskq = B_FALSE; 240 /* 241 * Wake up serializer_wait(). 242 */ 243 cv_signal(&s->ser_cv); 244 mutex_exit(&s->ser_lock); 245 } 246 247 /* 248 * Call proc(mp, arg) within serializer. 249 * 250 * If serializer is empty and not owned, proc(mp, arg) is called right 251 * away. Otherwise the request is queued. 252 */ 253 void 254 serializer_enter(serializer_t *s, srproc_t proc, mblk_t *mp, void *arg) 255 { 256 ASSERT(proc != NULL); 257 ASSERT(mp != NULL); 258 ASSERT(mp->b_next == NULL); 259 ASSERT(mp->b_prev == NULL); 260 261 ASSERT(MUTEX_NOT_HELD(&s->ser_lock)); 262 263 mutex_enter(&s->ser_lock); 264 if (s->ser_owner != NULL) { 265 /* 266 * Serializer is owned. Enqueue and return. 267 */ 268 serializer_enqueue(s, proc, mp, arg); 269 } else { 270 taskqid_t tid = TASKQID_INVALID; 271 272 /* 273 * If the request list is empty, can process right away, 274 * otherwise enqueue and process. 275 */ 276 s->ser_owner = curthread; 277 278 if (s->ser_first != NULL) { 279 ASSERT(s->ser_count != 0); 280 serializer_enqueue(s, proc, mp, arg); 281 } else { 282 ASSERT(s->ser_count == 0); 283 mutex_exit(&s->ser_lock); 284 /* 285 * Execute request 286 */ 287 DTRACE_PROBE4(serializer__exec__start, 288 serializer_t *, s, mblk_t *, mp, 289 void *, arg, srproc_t, proc); 290 serializer_exec(s, proc, mp, arg); 291 DTRACE_PROBE4(serializer__exec__end, 292 serializer_t *, s, mblk_t *, mp, 293 void *, arg, srproc_t, proc); 294 mutex_enter(&s->ser_lock); 295 } 296 297 /* 298 * Drain whatever has arrived in the meantime. 299 * If we spend too much time draining, continue draining by the 300 * taskq thread. 301 */ 302 while ((s->ser_first != NULL) && (tid == 0)) { 303 serializer_drain(s, serializer_credit); 304 if (s->ser_first != NULL) { 305 perim_context_swtch++; 306 /* 307 * If there is a taskq pending for this 308 * serializer, no need to schedule a new one. 309 */ 310 if (s->ser_taskq) { 311 break; 312 } else { 313 tid = taskq_dispatch(system_taskq, 314 (task_func_t *) 315 serializer_drain_completely, 316 s, TQ_NOSLEEP | TQ_NOQUEUE); 317 if (tid != TASKQID_INVALID) 318 s->ser_taskq = B_TRUE; 319 } 320 } 321 } 322 s->ser_owner = NULL; 323 s->ser_curr = NULL; 324 s->ser_proc = NULL; 325 s->ser_arg = NULL; 326 } 327 /* 328 * Wakeup serializer_wait(). 329 */ 330 cv_signal(&s->ser_cv); 331 mutex_exit(&s->ser_lock); 332 } 333 334 /* 335 * Wait for pending serializer jobs to complete. This function should never be 336 * called within the serializer or it will deadlock. 337 */ 338 void 339 serializer_wait(serializer_t *s) 340 { 341 mutex_enter(&s->ser_lock); 342 343 ASSERT(s->ser_owner != curthread); 344 345 while ((s->ser_owner != NULL) || s->ser_taskq || (s->ser_first != NULL)) 346 cv_wait(&s->ser_cv, &s->ser_lock); 347 ASSERT((s->ser_first == NULL) && (s->ser_last == NULL)); 348 /* 349 * Wakeup other potential waiters. 350 */ 351 cv_signal(&s->ser_cv); 352 mutex_exit(&s->ser_lock); 353 } 354 355 /* 356 * Create a new serializer. 357 */ 358 serializer_t * 359 serializer_create(int flags) 360 { 361 return (kmem_cache_alloc(serializer_cache, flags)); 362 } 363 364 /* 365 * Wait for all pending entries to drain and then destroy serializer. 366 */ 367 void 368 serializer_destroy(serializer_t *s) 369 { 370 serializer_wait(s); 371 372 ASSERT(s->ser_owner == NULL); 373 ASSERT(s->ser_taskq == 0); 374 ASSERT(s->ser_count == 0); 375 ASSERT(s->ser_first == NULL); 376 ASSERT(s->ser_last == NULL); 377 378 kmem_cache_free(serializer_cache, s); 379 } 380 381 /*ARGSUSED*/ 382 static int 383 serializer_constructor(void *buf, void *cdrarg, int kmflags) 384 { 385 serializer_t *s = buf; 386 387 mutex_init(&s->ser_lock, NULL, MUTEX_DEFAULT, NULL); 388 cv_init(&s->ser_cv, NULL, CV_DEFAULT, NULL); 389 390 s->ser_taskq = 0; 391 s->ser_count = 0; 392 s->ser_first = s->ser_last = s->ser_curr = NULL; 393 s->ser_proc = NULL; 394 s->ser_arg = NULL; 395 s->ser_owner = NULL; 396 return (0); 397 } 398 399 /*ARGSUSED*/ 400 static void 401 serializer_destructor(void *buf, void *cdrarg) 402 { 403 serializer_t *s = buf; 404 405 mutex_destroy(&s->ser_lock); 406 cv_destroy(&s->ser_cv); 407 } 408 409 void 410 serializer_init(void) 411 { 412 serializer_cache = kmem_cache_create("serializer_cache", 413 sizeof (serializer_t), 0, serializer_constructor, 414 serializer_destructor, NULL, NULL, NULL, 0); 415 } 416