xref: /illumos-gate/usr/src/uts/common/os/priv_defs (revision bbf215553c7233fbab8a0afdf1fac74c44781867)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved.
 * Copyright 2015, Joyent, Inc. All rights reserved.
 *
INSERT COMMENT
 */

#
# Privileges can be added to this file at any location, not
# necessarily at the end.  For patches, it is probably best to
# add the new privilege at the end; for ordinary releases privileges
# should be ordered alphabetically.
#

privilege PRIV_CONTRACT_EVENT

	Allows a process to request critical events without limitation.
	Allows a process to request reliable delivery of all events on
	any event queue.

privilege PRIV_CONTRACT_IDENTITY

	Allows a process to set the service FMRI value of a process
	contract template.

privilege PRIV_CONTRACT_OBSERVER

	Allows a process to observe contract events generated by
	contracts created and owned by users other than the process's
	effective user ID.
	Allows a process to open contract event endpoints belonging to
	contracts created and owned by users other than the process's
	effective user ID.

privilege PRIV_CPC_CPU

	Allow a process to access per-CPU hardware performance counters.

privilege PRIV_DTRACE_KERNEL

	Allows DTrace kernel-level tracing.

privilege PRIV_DTRACE_PROC

	Allows DTrace process-level tracing.
	Allows process-level tracing probes to be placed and enabled in
	processes to which the user has permissions.

privilege PRIV_DTRACE_USER

	Allows DTrace user-level tracing.
	Allows use of the syscall and profile DTrace providers to
	examine processes to which the user has permissions.

privilege PRIV_FILE_CHOWN

	Allows a process to change a file's owner user ID.
	Allows a process to change a file's group ID to one other than
	the process' effective group ID or one of the process'
	supplemental group IDs.

privilege PRIV_FILE_CHOWN_SELF

	Allows a process to give away its files; a process with this
	privilege will run as if {_POSIX_CHOWN_RESTRICTED} is not
	in effect.

privilege PRIV_FILE_DAC_EXECUTE

	Allows a process to execute an executable file whose permission
	bits or ACL do not allow the process execute permission.

privilege PRIV_FILE_DAC_READ

	Allows a process to read a file or directory whose permission
	bits or ACL do not allow the process read permission.

privilege PRIV_FILE_DAC_SEARCH

	Allows a process to search a directory whose permission bits or
	ACL do not allow the process search permission.

privilege PRIV_FILE_DAC_WRITE

	Allows a process to write a file or directory whose permission
	bits or ACL do not allow the process write permission.
	In order to write files owned by uid 0 in the absence of an
	effective uid of 0 ALL privileges are required.

privilege PRIV_FILE_DOWNGRADE_SL

	Allows a process to set the sensitivity label of a file or
	directory to a sensitivity label that does not dominate the
	existing sensitivity label.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_FILE_FLAG_SET

	Allows a process to set immutable, nounlink or appendonly
	file attributes.

basic privilege PRIV_FILE_LINK_ANY

	Allows a process to create hardlinks to files owned by a uid
	different from the process' effective uid.

privilege PRIV_FILE_OWNER

	Allows a process which is not the owner of a file or directory
	to perform the following operations that are normally permitted
	only for the file owner: modify that file's access and
	modification times; remove or rename a file or directory whose
	parent directory has the ``save text image after execution''
	(sticky) bit set; mount a ``namefs'' upon a file; modify
	permission bits or ACL except for the set-uid and set-gid
	bits.

basic privilege PRIV_FILE_READ

	Allows a process to read objects in the filesystem.

privilege PRIV_FILE_SETID

	Allows a process to change the ownership of a file or write to
	a file without the set-user-ID and set-group-ID bits being
	cleared.
	Allows a process to set the set-group-ID bit on a file or
	directory whose group is not the process' effective group or
	one of the process' supplemental groups.
	Allows a process to set the set-user-ID bit on a file with
	different ownership in the presence of PRIV_FILE_OWNER.
	Additional restrictions apply when creating or modifying a
	set-uid 0 file.

privilege PRIV_FILE_UPGRADE_SL

	Allows a process to set the sensitivity label of a file or
	directory to a sensitivity label that dominates the existing
	sensitivity label.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

basic privilege PRIV_FILE_WRITE

	Allows a process to modify objects in the filesystem.

privilege PRIV_GRAPHICS_ACCESS

	Allows a process to make privileged ioctls to graphics devices.
	Typically only xserver process needs to have this privilege.
	A process with this privilege is also allowed to perform
	privileged graphics device mappings.

privilege PRIV_GRAPHICS_MAP

	Allows a process to perform privileged mappings through a
	graphics device.

privilege PRIV_IPC_DAC_READ

	Allows a process to read a System V IPC
	Message Queue, Semaphore Set, or Shared Memory Segment whose
	permission bits do not allow the process read permission.
	Allows a process to read remote shared memory whose
	permission bits do not allow the process read permission.

privilege PRIV_IPC_DAC_WRITE

	Allows a process to write a System V IPC
	Message Queue, Semaphore Set, or Shared Memory Segment whose
	permission bits do not allow the process write permission.
	Allows a process to read remote shared memory whose
	permission bits do not allow the process write permission.
	Additional restrictions apply if the owner of the object has uid 0
	and the effective uid of the current process is not 0.

privilege PRIV_IPC_OWNER

	Allows a process which is not the owner of a System
	V IPC Message Queue, Semaphore Set, or Shared Memory Segment to
	remove, change ownership of, or change permission bits of the
	Message Queue, Semaphore Set, or Shared Memory Segment.
	Additional restrictions apply if the owner of the object has uid 0
	and the effective uid of the current process is not 0.

basic privilege PRIV_NET_ACCESS

	Allows a process to open a TCP, UDP, SDP or SCTP network endpoint.

privilege PRIV_NET_BINDMLP

	Allow a process to bind to a port that is configured as a
	multi-level port(MLP) for the process's zone. This privilege
	applies to both shared address and zone-specific address MLPs.
	See tnzonecfg(5) from the Trusted Extensions manual pages for
	information on configuring MLP ports.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_NET_ICMPACCESS

	Allows a process to send and receive ICMP packets.

privilege PRIV_NET_MAC_AWARE

	Allows a process to set NET_MAC_AWARE process flag by using
	setpflags(2). This privilege also allows a process to set
	SO_MAC_EXEMPT socket option by using setsockopt(3SOCKET).
	The NET_MAC_AWARE process flag and the SO_MAC_EXEMPT socket
	option both allow a local process to communicate with an
	unlabeled peer if the local process' label dominates the
	peer's default label, or if the local process runs in the
	global zone.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_NET_MAC_IMPLICIT

	Allows a process to set SO_MAC_IMPLICIT option by using
	setsockopt(3SOCKET).  This allows a privileged process to
	transmit implicitly-labeled packets to a peer.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_NET_OBSERVABILITY

	Allows a process to access /dev/lo0 and the devices in /dev/ipnet/
	while not requiring them to need PRIV_NET_RAWACCESS.

privilege PRIV_NET_PRIVADDR

	Allows a process to bind to a privileged port
	number. The privilege port numbers are 1-1023 (the traditional
	UNIX privileged ports) as well as those ports marked as
	"udp/tcp_extra_priv_ports" with the exception of the ports
	reserved for use by NFS.

privilege PRIV_NET_RAWACCESS

	Allows a process to have direct access to the network layer.

unsafe privilege PRIV_PROC_AUDIT

	Allows a process to generate audit records.
	Allows a process to get its own audit pre-selection information.

privilege PRIV_PROC_CHROOT

	Allows a process to change its root directory.

privilege PRIV_PROC_CLOCK_HIGHRES

	Allows a process to use high resolution timers.

basic privilege PRIV_PROC_EXEC

	Allows a process to call execve().

basic privilege PRIV_PROC_FORK

	Allows a process to call fork1()/forkall()/vfork()

basic privilege PRIV_PROC_INFO

	Allows a process to examine the status of processes other
	than those it can send signals to.  Processes which cannot
	be examined cannot be seen in /proc and appear not to exist.

privilege PRIV_PROC_LOCK_MEMORY

	Allows a process to lock pages in physical memory.

privilege PRIV_PROC_MEMINFO

	Allows a process to access physical memory information.

privilege PRIV_PROC_OWNER

	Allows a process to send signals to other processes, inspect
	and modify process state to other processes regardless of
	ownership.  When modifying another process, additional
	restrictions apply:  the effective privilege set of the
	attaching process must be a superset of the target process'
	effective, permitted and inheritable sets; the limit set must
	be a superset of the target's limit set; if the target process
	has any uid set to 0 all privilege must be asserted unless the
	effective uid is 0.
	Allows a process to bind arbitrary processes to CPUs.

privilege PRIV_PROC_PRIOUP

	Allows a process to elevate its priority above its current level.

privilege PRIV_PROC_PRIOCNTL

	Allows all that PRIV_PROC_PRIOUP allows.
	Allows a process to change its scheduling class to any scheduling class,
	including the RT class.

basic privilege PRIV_PROC_SECFLAGS

	Allows a process to manipulate the secflags of processes (subject to,
	additionally, the ability to signal that process)

basic privilege PRIV_PROC_SESSION

	Allows a process to send signals or trace processes outside its
	session.

unsafe privilege PRIV_PROC_SETID

	Allows a process to set its uids at will.
	Assuming uid 0 requires all privileges to be asserted.

privilege PRIV_PROC_TASKID

	Allows a process to assign a new task ID to the calling process.

privilege PRIV_PROC_ZONE

	Allows a process to trace or send signals to processes in
	other zones.

privilege PRIV_SYS_ACCT

	Allows a process to enable and disable and manage accounting through
	acct(2), getacct(2), putacct(2) and wracct(2).

privilege PRIV_SYS_ADMIN

	Allows a process to perform system administration tasks such
	as setting node and domain name and specifying nscd and coreadm
	settings.

privilege PRIV_SYS_AUDIT

	Allows a process to start the (kernel) audit daemon.
	Allows a process to view and set audit state (audit user ID,
	audit terminal ID, audit sessions ID, audit pre-selection mask).
	Allows a process to turn off and on auditing.
	Allows a process to configure the audit parameters (cache and
	queue sizes, event to class mappings, policy options).

privilege PRIV_SYS_CONFIG

	Allows a process to perform various system configuration tasks.
	Allows a process to add and remove swap devices; when adding a swap
	device, a process must also have sufficient privileges to read from
	and write to the swap device.

privilege PRIV_SYS_DEVICES

	Allows a process to successfully call a kernel module that
	calls the kernel drv_priv(9F) function to check for allowed
	access.
	Allows a process to open the real console device directly.
	Allows a process to open devices that have been exclusively opened.

privilege PRIV_SYS_IPC_CONFIG

	Allows a process to increase the size of a System V IPC Message
	Queue buffer.

privilege PRIV_SYS_LINKDIR

	Allows a process to unlink and link directories.

privilege PRIV_SYS_MOUNT

	Allows filesystem specific administrative procedures, such as
	filesystem configuration ioctls, quota calls and creation/deletion
	of snapshots.
	Allows a process to mount and unmount filesystems which would
	otherwise be restricted (i.e., most filesystems except
	namefs).
	A process performing a mount operation needs to have
	appropriate access to the device being mounted (read-write for
	"rw" mounts, read for "ro" mounts).
	A process performing any of the aforementioned
	filesystem operations needs to have read/write/owner
	access to the mount point.
	Only regular files and directories can serve as mount points
	for processes which do not have all zone privileges asserted.
	Unless a process has all zone privileges, the mount(2)
	system call will force the "nosuid" and "restrict" options, the
	latter only for autofs mountpoints.
	Regardless of privileges, a process running in a non-global zone may
	only control mounts performed from within said zone.
	Outside the global zone, the "nodevices" option is always forced.

privilege PRIV_SYS_IPTUN_CONFIG

	Allows a process to configure IP tunnel links.

privilege PRIV_SYS_DL_CONFIG

	Allows a process to configure all classes of datalinks, including
	configuration allowed by PRIV_SYS_IPTUN_CONFIG.

privilege PRIV_SYS_IP_CONFIG

	Allows a process to configure a system's IP interfaces and routes.
	Allows a process to configure network parameters using ndd.
	Allows a process access to otherwise restricted information using ndd.
	Allows a process to configure IPsec.
	Allows a process to pop anchored STREAMs modules with matching zoneid.

privilege PRIV_SYS_NET_CONFIG

	Allows all that PRIV_SYS_IP_CONFIG, PRIV_SYS_DL_CONFIG, and
	PRIV_SYS_PPP_CONFIG allow.
	Allows a process to push the rpcmod STREAMs module.
	Allows a process to INSERT/REMOVE STREAMs modules on locations other
	than the top of the module stack.

privilege PRIV_SYS_NFS

	Allows a process to perform Sun private NFS specific system calls.
	Allows a process to bind to ports reserved by NFS: ports 2049 (nfs)
	and port 4045 (lockd).

privilege PRIV_SYS_PPP_CONFIG

	Allows a process to create and destroy PPP (sppp) interfaces.
	Allows a process to configure PPP tunnels (sppptun).

privilege PRIV_SYS_RES_BIND

	Allows a process to bind processes to processor sets.

privilege PRIV_SYS_RES_CONFIG

	Allows all that PRIV_SYS_RES_BIND allows.
	Allows a process to create and delete processor sets, assign
	CPUs to processor sets and override the PSET_NOESCAPE property.
	Allows a process to change the operational status of CPUs in
	the system using p_online(2).
	Allows a process to configure resource pools and to bind
	processes to pools

unsafe privilege PRIV_SYS_RESOURCE

	Allows a process to modify the resource limits specified
	by setrlimit(2) and setrctl(2) without restriction.
	Allows a process to exceed the per-user maximum number of
	processes.
	Allows a process to extend or create files on a filesystem that
	has less than minfree space in reserve.

privilege PRIV_SYS_SMB

	Allows a process to access the Sun private SMB kernel module.
	Allows a process to bind to ports reserved by NetBIOS and SMB:
	ports 137 (NBNS), 138 (NetBIOS Datagram Service), 139 (NetBIOS
	Session Service and SMB-over-NBT) and 445 (SMB-over-TCP).

privilege PRIV_SYS_SUSER_COMPAT

	Allows a process to successfully call a third party loadable module
	that calls the kernel suser() function to check for allowed access.
	This privilege exists only for third party loadable module
	compatibility and is not used by Solaris proper.

privilege PRIV_SYS_TIME

	Allows a process to manipulate system time using any of the
	appropriate system calls: stime, adjtime, ntp_adjtime and
	the IA specific RTC calls.

privilege PRIV_SYS_TRANS_LABEL

	Allows a process to translate labels that are not dominated
	by the process' sensitivity label to and from an external
	string form.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_VIRT_MANAGE

	Allows a process to manage virtualized environments such as
	xVM(7).

privilege PRIV_WIN_COLORMAP

	Allows a process to override colormap restrictions.
        Allows a process to install or remove colormaps.
        Allows a process to retrieve colormap cell entries allocated
	by other processes.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_WIN_CONFIG

	Allows a process to configure or destroy resources that are
	permanently retained by the X server.
        Allows a process to use SetScreenSaver to set the screen
	saver timeout value.
        Allows a process to use ChangeHosts to modify the display
	access control list.
        Allows a process to use GrabServer.
        Allows a process to use the SetCloseDownMode request which
	may retain window, pixmap, colormap, property, cursor, font,
	or graphic context resources.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_WIN_DAC_READ

	Allows a process to read from a window resource that it does
	not own (has a different user ID).
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_WIN_DAC_WRITE

	Allows a process to write to or create a window resource that
	it does not own (has a different user ID). A newly created
	window property is created with the window's user ID.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_WIN_DEVICES

	Allows a process to perform operations on window input devices.
        Allows a process to get and set keyboard and pointer controls.
        Allows a process to modify pointer button and key mappings.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_WIN_DGA

	Allows a process to use the direct graphics access (DGA) X protocol
	extensions. Direct process access to the frame buffer is still
	required. Thus the process must have MAC and DAC privileges that
	allow access to the frame buffer, or the frame buffer must be
        allocated to the process.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_WIN_DOWNGRADE_SL

	Allows a process to set the sensitivity label of a window resource
	to a sensitivity label that does not dominate the existing
	sensitivity label.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_WIN_FONTPATH

	Allows a process to set a font path.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_WIN_MAC_READ

	Allows a process to read from a window resource whose sensitivity
	label is not equal to the process sensitivity label.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_WIN_MAC_WRITE

	Allows a process to create a window resource whose sensitivity
	label is not equal to the process sensitivity label.
	A newly created window property is created with the window's
	sensitivity label.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_WIN_SELECTION

	Allows a process to request inter-window data moves without the
	intervention of the selection confirmer.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_WIN_UPGRADE_SL

	Allows a process to set the sensitivity label of a window
	resource to a sensitivity label that dominates the existing
	sensitivity label.
	This privilege is interpreted only if the system is configured
	with Trusted Extensions.

privilege PRIV_XVM_CONTROL

	Allows a process access to the xVM(7) control devices for
	managing guest domains and the hypervisor. This privilege is
	used only if booted into xVM on x86 platforms.

set PRIV_EFFECTIVE

	Set of privileges currently in effect.

set PRIV_INHERITABLE

	Set of privileges that comes into effect on exec.

set PRIV_PERMITTED

	Set of privileges that can be put into the effective set without
	restriction.

set PRIV_LIMIT

	Set of privileges that determines the absolute upper bound of
	privileges this process and its off-spring can obtain.