1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 * 21 * Copyright (c) 2002-2006 Neterion, Inc. 22 */ 23 24 #include "xgehal-ring.h" 25 #include "xgehal-device.h" 26 27 #if defined(XGE_OS_DMA_REQUIRES_SYNC) && defined(XGE_HAL_DMA_DTR_STREAMING) 28 static ptrdiff_t 29 __hal_ring_item_dma_offset(xge_hal_mempool_h mempoolh, 30 void *item) 31 { 32 int memblock_idx; 33 void *memblock; 34 35 /* get owner memblock index */ 36 memblock_idx = __hal_ring_block_memblock_idx(item); 37 38 /* get owner memblock by memblock index */ 39 memblock = __hal_mempool_memblock(mempoolh, memblock_idx); 40 41 return (char*)item - (char*)memblock; 42 } 43 #endif 44 45 static dma_addr_t 46 __hal_ring_item_dma_addr(xge_hal_mempool_h mempoolh, void *item, 47 pci_dma_h *dma_handle) 48 { 49 int memblock_idx; 50 void *memblock; 51 xge_hal_mempool_dma_t *memblock_dma_object; 52 ptrdiff_t dma_item_offset; 53 54 /* get owner memblock index */ 55 memblock_idx = __hal_ring_block_memblock_idx((xge_hal_ring_block_t *) item); 56 57 /* get owner memblock by memblock index */ 58 memblock = __hal_mempool_memblock((xge_hal_mempool_t *) mempoolh, 59 memblock_idx); 60 61 /* get memblock DMA object by memblock index */ 62 memblock_dma_object = 63 __hal_mempool_memblock_dma((xge_hal_mempool_t *) mempoolh, 64 memblock_idx); 65 66 /* calculate offset in the memblock of this item */ 67 dma_item_offset = (char*)item - (char*)memblock; 68 69 *dma_handle = memblock_dma_object->handle; 70 71 return memblock_dma_object->addr + dma_item_offset; 72 } 73 74 static void 75 __hal_ring_rxdblock_link(xge_hal_mempool_h mempoolh, 76 xge_hal_ring_t *ring, int from, int to) 77 { 78 xge_hal_ring_block_t *to_item, *from_item; 79 dma_addr_t to_dma, from_dma; 80 pci_dma_h to_dma_handle, from_dma_handle; 81 82 /* get "from" RxD block */ 83 from_item = (xge_hal_ring_block_t *) 84 __hal_mempool_item((xge_hal_mempool_t *) mempoolh, from); 85 xge_assert(from_item); 86 87 /* get "to" RxD block */ 88 to_item = (xge_hal_ring_block_t *) 89 __hal_mempool_item((xge_hal_mempool_t *) mempoolh, to); 90 xge_assert(to_item); 91 92 /* return address of the beginning of previous RxD block */ 93 to_dma = __hal_ring_item_dma_addr(mempoolh, to_item, &to_dma_handle); 94 95 /* set next pointer for this RxD block to point on 96 * previous item's DMA start address */ 97 __hal_ring_block_next_pointer_set(from_item, to_dma); 98 99 /* return "from" RxD block's DMA start address */ 100 from_dma = 101 __hal_ring_item_dma_addr(mempoolh, from_item, &from_dma_handle); 102 103 #if defined(XGE_OS_DMA_REQUIRES_SYNC) && defined(XGE_HAL_DMA_DTR_STREAMING) 104 /* we must sync "from" RxD block, so hardware will see it */ 105 xge_os_dma_sync(ring->channel.pdev, 106 from_dma_handle, 107 from_dma + XGE_HAL_RING_NEXT_BLOCK_POINTER_OFFSET, 108 __hal_ring_item_dma_offset(mempoolh, from_item) + 109 XGE_HAL_RING_NEXT_BLOCK_POINTER_OFFSET, 110 sizeof(u64), 111 XGE_OS_DMA_DIR_TODEVICE); 112 #endif 113 114 xge_debug_ring(XGE_TRACE, "block%d:0x"XGE_OS_LLXFMT" => block%d:0x"XGE_OS_LLXFMT, 115 from, (unsigned long long)from_dma, to, 116 (unsigned long long)to_dma); 117 } 118 119 static xge_hal_status_e 120 __hal_ring_mempool_item_alloc(xge_hal_mempool_h mempoolh, 121 void *memblock, 122 int memblock_index, 123 xge_hal_mempool_dma_t *dma_object, 124 void *item, 125 int index, 126 int is_last, 127 void *userdata) 128 { 129 int i; 130 xge_hal_ring_t *ring = (xge_hal_ring_t *)userdata; 131 132 xge_assert(item); 133 xge_assert(ring); 134 135 136 /* format rxds array */ 137 for (i=ring->rxds_per_block-1; i>=0; i--) { 138 void *rxdblock_priv; 139 xge_hal_ring_rxd_priv_t *rxd_priv; 140 xge_hal_ring_rxd_1_t *rxdp; 141 int reserve_index = index * ring->rxds_per_block + i; 142 int memblock_item_idx; 143 144 ring->reserved_rxds_arr[reserve_index] = (char *)item + 145 (ring->rxds_per_block - 1 - i) * ring->rxd_size; 146 147 /* Note: memblock_item_idx is index of the item within 148 * the memblock. For instance, in case of three RxD-blocks 149 * per memblock this value can be 0,1 or 2. */ 150 rxdblock_priv = 151 __hal_mempool_item_priv((xge_hal_mempool_t *) mempoolh, 152 memblock_index, item, 153 &memblock_item_idx); 154 rxdp = (xge_hal_ring_rxd_1_t *) 155 ring->reserved_rxds_arr[reserve_index]; 156 rxd_priv = (xge_hal_ring_rxd_priv_t *) (void *) 157 ((char*)rxdblock_priv + ring->rxd_priv_size * i); 158 159 /* pre-format per-RxD Ring's private */ 160 rxd_priv->dma_offset = (char*)rxdp - (char*)memblock; 161 rxd_priv->dma_addr = dma_object->addr + rxd_priv->dma_offset; 162 rxd_priv->dma_handle = dma_object->handle; 163 #ifdef XGE_DEBUG_ASSERT 164 rxd_priv->dma_object = dma_object; 165 #endif 166 167 /* pre-format Host_Control */ 168 #if defined(XGE_HAL_USE_5B_MODE) 169 if (ring->buffer_mode == XGE_HAL_RING_QUEUE_BUFFER_MODE_5) { 170 xge_hal_ring_rxd_5_t *rxdp_5 = (xge_hal_ring_rxd_5_t *)rxdp; 171 #if defined(XGE_OS_PLATFORM_64BIT) 172 xge_assert(memblock_index <= 0xFFFF); 173 xge_assert(i <= 0xFFFF); 174 /* store memblock's index */ 175 rxdp_5->host_control = (u32)memblock_index << 16; 176 /* store index of memblock's private */ 177 rxdp_5->host_control |= (u32)(memblock_item_idx * 178 ring->rxds_per_block + i); 179 #else 180 /* 32-bit case */ 181 rxdp_5->host_control = (u32)rxd_priv; 182 #endif 183 } else { 184 /* 1b and 3b modes */ 185 rxdp->host_control = (u64)(ulong_t)rxd_priv; 186 } 187 #else 188 /* 1b and 3b modes */ 189 rxdp->host_control = (u64)(ulong_t)rxd_priv; 190 #endif 191 } 192 193 __hal_ring_block_memblock_idx_set((xge_hal_ring_block_t *) item, memblock_index); 194 195 if (is_last) { 196 /* link last one with first one */ 197 __hal_ring_rxdblock_link(mempoolh, ring, 0, index); 198 } 199 200 if (index > 0 ) { 201 /* link this RxD block with previous one */ 202 __hal_ring_rxdblock_link(mempoolh, ring, index, index-1); 203 } 204 205 return XGE_HAL_OK; 206 } 207 208 xge_hal_status_e 209 __hal_ring_initial_replenish(xge_hal_channel_t *channel, 210 xge_hal_channel_reopen_e reopen) 211 { 212 xge_hal_dtr_h dtr = NULL; 213 214 while (xge_hal_channel_dtr_count(channel) > 0) { 215 xge_hal_status_e status; 216 217 status = xge_hal_ring_dtr_reserve(channel, &dtr); 218 xge_assert(status == XGE_HAL_OK); 219 220 if (channel->dtr_init) { 221 status = channel->dtr_init(channel, 222 dtr, channel->reserve_length, 223 channel->userdata, 224 reopen); 225 if (status != XGE_HAL_OK) { 226 xge_hal_ring_dtr_free(channel, dtr); 227 xge_hal_channel_abort(channel, 228 XGE_HAL_CHANNEL_OC_NORMAL); 229 return status; 230 } 231 } 232 233 xge_hal_ring_dtr_post(channel, dtr); 234 } 235 236 return XGE_HAL_OK; 237 } 238 239 xge_hal_status_e 240 __hal_ring_open(xge_hal_channel_h channelh, xge_hal_channel_attr_t *attr) 241 { 242 xge_hal_status_e status; 243 xge_hal_device_t *hldev; 244 xge_hal_ring_t *ring = (xge_hal_ring_t *)channelh; 245 xge_hal_ring_queue_t *queue; 246 247 248 /* Note: at this point we have channel.devh and channel.pdev 249 * pre-set only! */ 250 251 hldev = (xge_hal_device_t *)ring->channel.devh; 252 ring->config = &hldev->config.ring; 253 queue = &ring->config->queue[attr->post_qid]; 254 ring->indicate_max_pkts = queue->indicate_max_pkts; 255 ring->buffer_mode = queue->buffer_mode; 256 257 xge_assert(queue->configured); 258 259 #if defined(XGE_HAL_RX_MULTI_RESERVE) 260 xge_os_spin_lock_init(&ring->channel.reserve_lock, hldev->pdev); 261 #elif defined(XGE_HAL_RX_MULTI_RESERVE_IRQ) 262 xge_os_spin_lock_init_irq(&ring->channel.reserve_lock, hldev->irqh); 263 #endif 264 #if defined(XGE_HAL_RX_MULTI_POST) 265 xge_os_spin_lock_init(&ring->channel.post_lock, hldev->pdev); 266 #elif defined(XGE_HAL_RX_MULTI_POST_IRQ) 267 xge_os_spin_lock_init_irq(&ring->channel.post_lock, hldev->irqh); 268 #endif 269 270 ring->rxd_size = XGE_HAL_RING_RXD_SIZEOF(queue->buffer_mode); 271 ring->rxd_priv_size = 272 sizeof(xge_hal_ring_rxd_priv_t) + attr->per_dtr_space; 273 274 /* how many RxDs can fit into one block. Depends on configured 275 * buffer_mode. */ 276 ring->rxds_per_block = XGE_HAL_RING_RXDS_PER_BLOCK(queue->buffer_mode); 277 278 /* calculate actual RxD block private size */ 279 ring->rxdblock_priv_size = ring->rxd_priv_size * ring->rxds_per_block; 280 281 ring->reserved_rxds_arr = (void **) xge_os_malloc(ring->channel.pdev, 282 sizeof(void*) * queue->max * ring->rxds_per_block); 283 284 if (ring->reserved_rxds_arr == NULL) { 285 __hal_ring_close(channelh); 286 return XGE_HAL_ERR_OUT_OF_MEMORY; 287 } 288 289 ring->mempool = __hal_mempool_create( 290 hldev->pdev, 291 ring->config->memblock_size, 292 XGE_HAL_RING_RXDBLOCK_SIZE, 293 ring->rxdblock_priv_size, 294 queue->initial, queue->max, 295 __hal_ring_mempool_item_alloc, 296 NULL, /* nothing to free */ 297 ring); 298 if (ring->mempool == NULL) { 299 __hal_ring_close(channelh); 300 return XGE_HAL_ERR_OUT_OF_MEMORY; 301 } 302 303 status = __hal_channel_initialize(channelh, 304 attr, 305 ring->reserved_rxds_arr, 306 queue->initial * ring->rxds_per_block, 307 queue->max * ring->rxds_per_block, 308 0 /* no threshold for ring! */); 309 if (status != XGE_HAL_OK) { 310 __hal_ring_close(channelh); 311 return status; 312 } 313 314 /* sanity check that everything formatted ok */ 315 xge_assert(ring->reserved_rxds_arr[0] == 316 (char *)ring->mempool->items_arr[0] + 317 (ring->rxds_per_block * ring->rxd_size - ring->rxd_size)); 318 319 /* Note: 320 * Specifying dtr_init callback means two things: 321 * 1) dtrs need to be initialized by ULD at channel-open time; 322 * 2) dtrs need to be posted at channel-open time 323 * (that's what the initial_replenish() below does) 324 * Currently we don't have a case when the 1) is done without the 2). 325 */ 326 if (ring->channel.dtr_init) { 327 if ((status = __hal_ring_initial_replenish ( 328 (xge_hal_channel_t *) channelh, 329 XGE_HAL_CHANNEL_OC_NORMAL) ) 330 != XGE_HAL_OK) { 331 __hal_ring_close(channelh); 332 return status; 333 } 334 } 335 336 /* initial replenish will increment the counter in its post() routine, 337 * we have to reset it */ 338 ring->channel.usage_cnt = 0; 339 340 return XGE_HAL_OK; 341 } 342 343 void 344 __hal_ring_close(xge_hal_channel_h channelh) 345 { 346 xge_hal_ring_t *ring = (xge_hal_ring_t *)channelh; 347 xge_hal_ring_queue_t *queue; 348 #if defined(XGE_HAL_RX_MULTI_RESERVE)||defined(XGE_HAL_RX_MULTI_RESERVE_IRQ)||\ 349 defined(XGE_HAL_RX_MULTI_POST) || defined(XGE_HAL_RX_MULTI_POST_IRQ) 350 xge_hal_device_t *hldev = (xge_hal_device_t *)ring->channel.devh; 351 #endif 352 353 xge_assert(ring->channel.pdev); 354 355 queue = &ring->config->queue[ring->channel.post_qid]; 356 357 if (ring->mempool) { 358 __hal_mempool_destroy(ring->mempool); 359 } 360 361 if (ring->reserved_rxds_arr) { 362 xge_os_free(ring->channel.pdev, 363 ring->reserved_rxds_arr, 364 sizeof(void*) * queue->max * ring->rxds_per_block); 365 } 366 367 __hal_channel_terminate(channelh); 368 369 #if defined(XGE_HAL_RX_MULTI_RESERVE) 370 xge_os_spin_lock_destroy(&ring->channel.reserve_lock, hldev->pdev); 371 #elif defined(XGE_HAL_RX_MULTI_RESERVE_IRQ) 372 xge_os_spin_lock_destroy_irq(&ring->channel.reserve_lock, hldev->pdev); 373 #endif 374 #if defined(XGE_HAL_RX_MULTI_POST) 375 xge_os_spin_lock_destroy(&ring->channel.post_lock, hldev->pdev); 376 #elif defined(XGE_HAL_RX_MULTI_POST_IRQ) 377 xge_os_spin_lock_destroy_irq(&ring->channel.post_lock, hldev->pdev); 378 #endif 379 } 380 381 void 382 __hal_ring_prc_enable(xge_hal_channel_h channelh) 383 { 384 xge_hal_ring_t *ring = (xge_hal_ring_t *)channelh; 385 xge_hal_device_t *hldev = (xge_hal_device_t *)ring->channel.devh; 386 xge_hal_pci_bar0_t *bar0; 387 u64 val64; 388 void *first_block; 389 int block_num; 390 xge_hal_ring_queue_t *queue; 391 pci_dma_h dma_handle; 392 393 xge_assert(ring); 394 xge_assert(ring->channel.pdev); 395 bar0 = (xge_hal_pci_bar0_t *) (void *) 396 ((xge_hal_device_t *)ring->channel.devh)->bar0; 397 398 queue = &ring->config->queue[ring->channel.post_qid]; 399 xge_assert(queue->buffer_mode == 1 || 400 queue->buffer_mode == 3 || 401 queue->buffer_mode == 5); 402 403 /* last block in fact becomes first. This is just the way it 404 * is filled up and linked by item_alloc() */ 405 406 block_num = queue->initial; 407 first_block = __hal_mempool_item(ring->mempool, block_num - 1); 408 val64 = __hal_ring_item_dma_addr(ring->mempool, 409 first_block, &dma_handle); 410 xge_os_pio_mem_write64(ring->channel.pdev, ring->channel.regh0, 411 val64, &bar0->prc_rxd0_n[ring->channel.post_qid]); 412 413 xge_debug_ring(XGE_TRACE, "ring%d PRC DMA addr 0x"XGE_OS_LLXFMT" initialized", 414 ring->channel.post_qid, (unsigned long long)val64); 415 416 val64 = xge_os_pio_mem_read64(ring->channel.pdev, 417 ring->channel.regh0, &bar0->prc_ctrl_n[ring->channel.post_qid]); 418 if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC && 419 !queue->rth_en) { 420 val64 |= XGE_HAL_PRC_CTRL_RTH_DISABLE; 421 } 422 val64 |= XGE_HAL_PRC_CTRL_RC_ENABLED; 423 424 val64 |= vBIT((queue->buffer_mode >> 1),14,2);/* 1,3 or 5 => 0,1 or 2 */ 425 val64 &= ~XGE_HAL_PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF); 426 val64 |= XGE_HAL_PRC_CTRL_RXD_BACKOFF_INTERVAL( 427 (hldev->config.pci_freq_mherz * queue->backoff_interval_us)); 428 429 /* Beware: no snoop by the bridge if (no_snoop_bits) */ 430 val64 |= XGE_HAL_PRC_CTRL_NO_SNOOP(queue->no_snoop_bits); 431 432 /* Herc: always use group_reads */ 433 if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) 434 val64 |= XGE_HAL_PRC_CTRL_GROUP_READS; 435 436 if (hldev->config.bimodal_interrupts) 437 if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) 438 val64 |= XGE_HAL_PRC_CTRL_BIMODAL_INTERRUPT; 439 440 xge_os_pio_mem_write64(ring->channel.pdev, ring->channel.regh0, 441 val64, &bar0->prc_ctrl_n[ring->channel.post_qid]); 442 443 /* Configure Receive Protocol Assist */ 444 val64 = xge_os_pio_mem_read64(ring->channel.pdev, 445 ring->channel.regh0, &bar0->rx_pa_cfg); 446 val64 |= XGE_HAL_RX_PA_CFG_SCATTER_MODE(ring->config->scatter_mode); 447 val64 |= (XGE_HAL_RX_PA_CFG_IGNORE_SNAP_OUI | XGE_HAL_RX_PA_CFG_IGNORE_LLC_CTRL); 448 /* Clean STRIP_VLAN_TAG bit and set as config from upper layer */ 449 val64 &= ~XGE_HAL_RX_PA_CFG_STRIP_VLAN_TAG_MODE(1); 450 val64 |= XGE_HAL_RX_PA_CFG_STRIP_VLAN_TAG_MODE(ring->config->strip_vlan_tag); 451 452 xge_os_pio_mem_write64(ring->channel.pdev, ring->channel.regh0, 453 val64, &bar0->rx_pa_cfg); 454 455 xge_debug_ring(XGE_TRACE, "ring%d enabled in buffer_mode %d", 456 ring->channel.post_qid, queue->buffer_mode); 457 } 458 459 void 460 __hal_ring_prc_disable(xge_hal_channel_h channelh) 461 { 462 xge_hal_ring_t *ring = (xge_hal_ring_t *)channelh; 463 xge_hal_pci_bar0_t *bar0; 464 u64 val64; 465 466 xge_assert(ring); 467 xge_assert(ring->channel.pdev); 468 bar0 = (xge_hal_pci_bar0_t *) (void *) 469 ((xge_hal_device_t *)ring->channel.devh)->bar0; 470 471 val64 = xge_os_pio_mem_read64(ring->channel.pdev, 472 ring->channel.regh0, 473 &bar0->prc_ctrl_n[ring->channel.post_qid]); 474 val64 &= ~((u64) XGE_HAL_PRC_CTRL_RC_ENABLED); 475 xge_os_pio_mem_write64(ring->channel.pdev, ring->channel.regh0, 476 val64, &bar0->prc_ctrl_n[ring->channel.post_qid]); 477 } 478 479 void 480 __hal_ring_hw_initialize(xge_hal_device_h devh) 481 { 482 xge_hal_device_t *hldev = (xge_hal_device_t *)devh; 483 xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0; 484 u64 val64; 485 int i, j; 486 487 /* Rx DMA intialization. */ 488 489 val64 = 0; 490 for (i = 0; i < XGE_HAL_MAX_RING_NUM; i++) { 491 if (!hldev->config.ring.queue[i].configured) 492 continue; 493 val64 |= vBIT(hldev->config.ring.queue[i].priority, 494 (5 + (i * 8)), 3); 495 } 496 xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, 497 &bar0->rx_queue_priority); 498 xge_debug_ring(XGE_TRACE, "Rings priority configured to 0x"XGE_OS_LLXFMT, 499 (unsigned long long)val64); 500 501 /* Configuring ring queues according to per-ring configuration */ 502 val64 = 0; 503 for (i = 0; i < XGE_HAL_MAX_RING_NUM; i++) { 504 if (!hldev->config.ring.queue[i].configured) 505 continue; 506 val64 |= vBIT(hldev->config.ring.queue[i].dram_size_mb,(i*8),8); 507 } 508 xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, 509 &bar0->rx_queue_cfg); 510 xge_debug_ring(XGE_TRACE, "DRAM configured to 0x"XGE_OS_LLXFMT, 511 (unsigned long long)val64); 512 513 if (!hldev->config.rts_qos_en && 514 !hldev->config.rts_port_en && 515 !hldev->config.rts_mac_en) { 516 517 /* 518 * Activate default (QoS-based) Rx steering 519 */ 520 521 val64 = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0, 522 &bar0->rts_qos_steering); 523 for (j = 0; j < 8 /* QoS max */; j++) 524 { 525 for (i = 0; i < XGE_HAL_MAX_RING_NUM; i++) 526 { 527 if (!hldev->config.ring.queue[i].configured) 528 continue; 529 if (!hldev->config.ring.queue[i].rth_en) 530 val64 |= (BIT(i) >> (j*8)); 531 } 532 } 533 xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, 534 &bar0->rts_qos_steering); 535 xge_debug_ring(XGE_TRACE, "QoS steering configured to 0x"XGE_OS_LLXFMT, 536 (unsigned long long)val64); 537 538 } 539 540 /* Note: If a queue does not exist, it should be assigned a maximum 541 * length of zero. Otherwise, packet loss could occur. 542 * P. 4-4 User guide. 543 * 544 * All configured rings will be properly set at device open time 545 * by utilizing device_mtu_set() API call. */ 546 for (i = 0; i < XGE_HAL_MAX_RING_NUM; i++) { 547 if (hldev->config.ring.queue[i].configured) 548 continue; 549 xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, 0ULL, 550 &bar0->rts_frm_len_n[i]); 551 } 552 553 #ifdef XGE_HAL_HERC_EMULATION 554 val64 = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0, 555 ((u8 *)bar0 + 0x2e60)); /* mc_rldram_mrs_herc */ 556 val64 |= 0x0000000000010000; 557 xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, 558 ((u8 *)bar0 + 0x2e60)); 559 560 val64 |= 0x003a000000000000; 561 xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, 562 ((u8 *)bar0 + 0x2e40)); /* mc_rldram_ref_herc */ 563 xge_os_mdelay(2000); 564 #endif 565 566 /* now enabling MC-RLDRAM after setting MC_QUEUE sizes */ 567 val64 = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0, 568 &bar0->mc_rldram_mrs); 569 val64 |= XGE_HAL_MC_RLDRAM_QUEUE_SIZE_ENABLE | 570 XGE_HAL_MC_RLDRAM_MRS_ENABLE; 571 __hal_pio_mem_write32_upper(hldev->pdev, hldev->regh0, (u32)(val64>>32), 572 &bar0->mc_rldram_mrs); 573 xge_os_wmb(); 574 __hal_pio_mem_write32_lower(hldev->pdev, hldev->regh0, (u32)val64, 575 &bar0->mc_rldram_mrs); 576 577 /* RLDRAM initialization procedure require 500us to complete */ 578 xge_os_mdelay(1); 579 580 /* Temporary fixes for Herc RLDRAM */ 581 if (xge_hal_device_check_id(hldev) == XGE_HAL_CARD_HERC) { 582 val64 = XGE_HAL_MC_RLDRAM_SET_REF_PERIOD(0x0279); 583 xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, 584 &bar0->mc_rldram_ref_per_herc); 585 586 val64 = xge_os_pio_mem_read64(hldev->pdev, hldev->regh0, 587 &bar0->mc_rldram_mrs_herc); 588 xge_debug_ring(XGE_TRACE, "default mc_rldram_mrs_herc 0x"XGE_OS_LLXFMT, 589 (unsigned long long)val64); 590 591 val64 = 0x0003570003010300ULL; 592 xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, val64, 593 &bar0->mc_rldram_mrs_herc); 594 595 xge_os_mdelay(1); 596 } 597 598 if (hldev->config.intr_mode != XGE_HAL_INTR_MODE_MSIX) 599 return; 600 601 /* 602 * Assign MSI-X vectors 603 */ 604 for (i = 0; i < XGE_HAL_MAX_RING_NUM; i++) { 605 xge_list_t *item; 606 xge_hal_channel_t *channel = NULL; 607 608 if (!hldev->config.ring.queue[i].configured || 609 !hldev->config.ring.queue[i].intr_vector) 610 continue; 611 612 /* find channel */ 613 xge_list_for_each(item, &hldev->free_channels) { 614 xge_hal_channel_t *tmp; 615 tmp = xge_container_of(item, xge_hal_channel_t, 616 item); 617 if (tmp->type == XGE_HAL_CHANNEL_TYPE_RING && 618 tmp->post_qid == i) { 619 channel = tmp; 620 break; 621 } 622 } 623 624 if (channel) { 625 (void) xge_hal_channel_msix_set(channel, 626 hldev->config.ring.queue[i].intr_vector); 627 } 628 } 629 630 xge_debug_ring(XGE_TRACE, "%s", "ring channels initialized"); 631 } 632 633 void 634 __hal_ring_mtu_set(xge_hal_device_h devh, int new_frmlen) 635 { 636 int i; 637 xge_hal_device_t *hldev = (xge_hal_device_t *)devh; 638 xge_hal_pci_bar0_t *bar0 = (xge_hal_pci_bar0_t *)(void *)hldev->bar0; 639 640 for (i = 0; i < XGE_HAL_MAX_RING_NUM; i++) { 641 if (!hldev->config.ring.queue[i].configured) 642 continue; 643 if (hldev->config.ring.queue[i].max_frm_len != 644 XGE_HAL_RING_USE_MTU) { 645 xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, 646 XGE_HAL_MAC_RTS_FRM_LEN_SET( 647 hldev->config.ring.queue[i].max_frm_len), 648 &bar0->rts_frm_len_n[i]); 649 } else { 650 xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, 651 XGE_HAL_MAC_RTS_FRM_LEN_SET(new_frmlen), 652 &bar0->rts_frm_len_n[i]); 653 } 654 } 655 xge_os_pio_mem_write64(hldev->pdev, hldev->regh0, 656 XGE_HAL_RMAC_MAX_PYLD_LEN(new_frmlen), 657 &bar0->rmac_max_pyld_len); 658 } 659