1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2006 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #pragma ident "%Z%%M% %I% %E% SMI" 28 29 /* 30 * Human Interface Device driver (HID) 31 * 32 * The HID driver is a software driver which acts as a class 33 * driver for USB human input devices like keyboard, mouse, 34 * joystick etc and provides the class-specific interfaces 35 * between these client driver modules and the Universal Serial 36 * Bus Driver(USBA). 37 * 38 * NOTE: This driver is not DDI compliant in that it uses undocumented 39 * functions for logging (USB_DPRINTF_L*, usb_alloc_log_hdl, usb_free_log_hdl). 40 * 41 * Undocumented functions may go away in a future Solaris OS release. 42 * 43 * Please see the DDK for sample code of these functions, and for the usbskel 44 * skeleton template driver which contains scaled-down versions of these 45 * functions written in a DDI-compliant way. 46 */ 47 48 #define USBDRV_MAJOR_VER 2 49 #define USBDRV_MINOR_VER 0 50 51 #include <sys/usb/usba.h> 52 #include <sys/usb/usba/genconsole.h> 53 #include <sys/usb/clients/hid/hid.h> 54 #include <sys/usb/clients/hid/hid_polled.h> 55 #include <sys/usb/clients/hidparser/hidparser.h> 56 #include <sys/usb/clients/hid/hidvar.h> 57 #include <sys/usb/clients/hid/hidminor.h> 58 #include <sys/usb/clients/hidparser/hid_parser_driver.h> 59 #include <sys/stropts.h> 60 #include <sys/sunddi.h> 61 62 extern int ddi_create_internal_pathname(dev_info_t *, char *, int, minor_t); 63 extern void consconfig_link(major_t major, minor_t minor); 64 extern int consconfig_unlink(major_t major, minor_t minor); 65 66 static void hid_consconfig_relink(void *); 67 68 /* Debugging support */ 69 uint_t hid_errmask = (uint_t)PRINT_MASK_ALL; 70 uint_t hid_errlevel = USB_LOG_L4; 71 uint_t hid_instance_debug = (uint_t)-1; 72 73 /* tunables */ 74 int hid_default_pipe_drain_timeout = HID_DEFAULT_PIPE_DRAIN_TIMEOUT; 75 int hid_pm_mouse = 0; 76 77 /* soft state structures */ 78 #define HID_INITIAL_SOFT_SPACE 4 79 static void *hid_statep; 80 81 /* Callbacks */ 82 static void hid_interrupt_pipe_callback(usb_pipe_handle_t, 83 usb_intr_req_t *); 84 static void hid_default_pipe_callback(usb_pipe_handle_t, usb_ctrl_req_t *); 85 static void hid_interrupt_pipe_exception_callback(usb_pipe_handle_t, 86 usb_intr_req_t *); 87 static void hid_default_pipe_exception_callback(usb_pipe_handle_t, 88 usb_ctrl_req_t *); 89 static int hid_restore_state_event_callback(dev_info_t *); 90 static int hid_disconnect_event_callback(dev_info_t *); 91 static int hid_cpr_suspend(hid_state_t *hidp); 92 static void hid_cpr_resume(hid_state_t *hidp); 93 static void hid_power_change_callback(void *arg, int rval); 94 95 /* Supporting routines */ 96 static size_t hid_parse_hid_descr(usb_hid_descr_t *, size_t, 97 usb_alt_if_data_t *, usb_ep_data_t *); 98 static int hid_parse_hid_descr_failure(hid_state_t *); 99 static int hid_handle_report_descriptor(hid_state_t *, int); 100 static void hid_set_idle(hid_state_t *); 101 static void hid_set_protocol(hid_state_t *, int); 102 static void hid_detach_cleanup(dev_info_t *, hid_state_t *); 103 104 static int hid_start_intr_polling(hid_state_t *); 105 static void hid_close_intr_pipe(hid_state_t *); 106 static int hid_mctl_execute_cmd(hid_state_t *, int, hid_req_t *, mblk_t *); 107 static int hid_mctl_receive(queue_t *, mblk_t *); 108 static int hid_send_async_ctrl_request(hid_state_t *, hid_req_t *, 109 uchar_t, int, ushort_t, hid_default_pipe_arg_t *); 110 static void hid_ioctl(queue_t *, mblk_t *); 111 112 static void hid_create_pm_components(dev_info_t *, hid_state_t *); 113 static int hid_is_pm_enabled(dev_info_t *); 114 static void hid_restore_device_state(dev_info_t *, hid_state_t *); 115 static void hid_save_device_state(hid_state_t *); 116 117 static void hid_qreply_merror(queue_t *, mblk_t *, uchar_t); 118 static mblk_t *hid_data2mblk(uchar_t *, int); 119 static void hid_flush(queue_t *); 120 121 static int hid_pwrlvl0(hid_state_t *); 122 static int hid_pwrlvl1(hid_state_t *); 123 static int hid_pwrlvl2(hid_state_t *); 124 static int hid_pwrlvl3(hid_state_t *); 125 static void hid_pm_busy_component(hid_state_t *); 126 static void hid_pm_idle_component(hid_state_t *); 127 128 static int hid_polled_read(hid_polled_handle_t, uchar_t **); 129 static int hid_polled_input_enter(hid_polled_handle_t); 130 static int hid_polled_input_exit(hid_polled_handle_t); 131 static int hid_polled_input_init(hid_state_t *); 132 static int hid_polled_input_fini(hid_state_t *); 133 134 /* Streams entry points */ 135 static int hid_open(queue_t *, dev_t *, int, int, cred_t *); 136 static int hid_close(queue_t *, int, cred_t *); 137 static int hid_wput(queue_t *, mblk_t *); 138 static int hid_wsrv(queue_t *); 139 140 /* dev_ops entry points */ 141 static int hid_info(dev_info_t *, ddi_info_cmd_t, void *, void **); 142 static int hid_attach(dev_info_t *, ddi_attach_cmd_t); 143 static int hid_detach(dev_info_t *, ddi_detach_cmd_t); 144 static int hid_power(dev_info_t *, int, int); 145 146 /* 147 * Warlock is not aware of the automatic locking mechanisms for 148 * streams drivers. The hid streams enter points are protected by 149 * a per module perimeter. If the locking in hid is a bottleneck 150 * per queue pair or per queue locking may be used. Since warlock 151 * is not aware of the streams perimeters, these notes have been added. 152 * 153 * Note that the perimeters do not protect the driver from callbacks 154 * happening while a streams entry point is executing. So, the hid_mutex 155 * has been created to protect the data. 156 */ 157 _NOTE(SCHEME_PROTECTS_DATA("unique per call", iocblk)) 158 _NOTE(SCHEME_PROTECTS_DATA("unique per call", datab)) 159 _NOTE(SCHEME_PROTECTS_DATA("unique per call", msgb)) 160 _NOTE(SCHEME_PROTECTS_DATA("unique per call", queue)) 161 _NOTE(SCHEME_PROTECTS_DATA("unique per call", usb_ctrl_req)) 162 _NOTE(SCHEME_PROTECTS_DATA("unique per call", usb_intr_req)) 163 164 /* module information */ 165 static struct module_info hid_mod_info = { 166 0x0ffff, /* module id number */ 167 "hid", /* module name */ 168 0, /* min packet size accepted */ 169 INFPSZ, /* max packet size accepted */ 170 512, /* hi-water mark */ 171 128 /* lo-water mark */ 172 }; 173 174 /* read queue information structure */ 175 static struct qinit rinit = { 176 NULL, /* put procedure not needed */ 177 NULL, /* service procedure not needed */ 178 hid_open, /* called on startup */ 179 hid_close, /* called on finish */ 180 NULL, /* for future use */ 181 &hid_mod_info, /* module information structure */ 182 NULL /* module statistics structure */ 183 }; 184 185 /* write queue information structure */ 186 static struct qinit winit = { 187 hid_wput, /* put procedure */ 188 hid_wsrv, /* service procedure */ 189 NULL, /* open not used on write side */ 190 NULL, /* close not used on write side */ 191 NULL, /* for future use */ 192 &hid_mod_info, /* module information structure */ 193 NULL /* module statistics structure */ 194 }; 195 196 struct streamtab hid_streamtab = { 197 &rinit, 198 &winit, 199 NULL, /* not a MUX */ 200 NULL /* not a MUX */ 201 }; 202 203 struct cb_ops hid_cb_ops = { 204 nulldev, /* open */ 205 nulldev, /* close */ 206 nulldev, /* strategy */ 207 nulldev, /* print */ 208 nulldev, /* dump */ 209 nulldev, /* read */ 210 nulldev, /* write */ 211 nulldev, /* ioctl */ 212 nulldev, /* devmap */ 213 nulldev, /* mmap */ 214 nulldev, /* segmap */ 215 nochpoll, /* poll */ 216 ddi_prop_op, /* cb_prop_op */ 217 &hid_streamtab, /* streamtab */ 218 D_MP | D_MTPERQ 219 }; 220 221 222 static struct dev_ops hid_ops = { 223 DEVO_REV, /* devo_rev, */ 224 0, /* refcnt */ 225 hid_info, /* info */ 226 nulldev, /* identify */ 227 nulldev, /* probe */ 228 hid_attach, /* attach */ 229 hid_detach, /* detach */ 230 nodev, /* reset */ 231 &hid_cb_ops, /* driver operations */ 232 NULL, /* bus operations */ 233 hid_power /* power */ 234 }; 235 236 static struct modldrv hidmodldrv = { 237 &mod_driverops, 238 "USB HID Client Driver %I%", 239 &hid_ops /* driver ops */ 240 }; 241 242 static struct modlinkage modlinkage = { 243 MODREV_1, 244 &hidmodldrv, 245 NULL, 246 }; 247 248 static usb_event_t hid_events = { 249 hid_disconnect_event_callback, 250 hid_restore_state_event_callback, 251 NULL, 252 NULL, 253 }; 254 255 256 int 257 _init(void) 258 { 259 int rval; 260 261 if (((rval = ddi_soft_state_init(&hid_statep, sizeof (hid_state_t), 262 HID_INITIAL_SOFT_SPACE)) != 0)) { 263 264 return (rval); 265 } 266 267 if ((rval = mod_install(&modlinkage)) != 0) { 268 ddi_soft_state_fini(&hid_statep); 269 } 270 271 return (rval); 272 } 273 274 275 int 276 _fini(void) 277 { 278 int rval; 279 280 if ((rval = mod_remove(&modlinkage)) != 0) { 281 282 return (rval); 283 } 284 285 ddi_soft_state_fini(&hid_statep); 286 287 return (rval); 288 } 289 290 291 int 292 _info(struct modinfo *modinfop) 293 { 294 return (mod_info(&modlinkage, modinfop)); 295 } 296 297 298 /* 299 * hid_info : 300 * Get minor number, soft state structure etc. 301 */ 302 /*ARGSUSED*/ 303 static int 304 hid_info(dev_info_t *dip, ddi_info_cmd_t infocmd, 305 void *arg, void **result) 306 { 307 hid_state_t *hidp = NULL; 308 int error = DDI_FAILURE; 309 minor_t minor = getminor((dev_t)arg); 310 int instance = HID_MINOR_TO_INSTANCE(minor); 311 312 switch (infocmd) { 313 case DDI_INFO_DEVT2DEVINFO: 314 if ((hidp = ddi_get_soft_state(hid_statep, instance)) != NULL) { 315 *result = hidp->hid_dip; 316 if (*result != NULL) { 317 error = DDI_SUCCESS; 318 } 319 } else 320 *result = NULL; 321 break; 322 case DDI_INFO_DEVT2INSTANCE: 323 *result = (void *)(uintptr_t)instance; 324 error = DDI_SUCCESS; 325 break; 326 default: 327 break; 328 } 329 330 return (error); 331 } 332 333 334 /* 335 * hid_attach : 336 * Gets called at the time of attach. Do allocation, 337 * and initialization of the software structure. 338 * Get all the descriptors, setup the 339 * report descriptor tree by calling hidparser 340 * function. 341 */ 342 static int 343 hid_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) 344 { 345 346 int instance = ddi_get_instance(dip); 347 int parse_hid_descr_error = 0; 348 hid_state_t *hidp = NULL; 349 uint32_t usage_page; 350 uint32_t usage; 351 usb_client_dev_data_t *dev_data; 352 usb_alt_if_data_t *altif_data; 353 char minor_name[HID_MINOR_NAME_LEN]; 354 usb_ep_data_t *ep_data; 355 356 switch (cmd) { 357 case DDI_ATTACH: 358 break; 359 case DDI_RESUME: 360 hidp = ddi_get_soft_state(hid_statep, instance); 361 hid_cpr_resume(hidp); 362 return (DDI_SUCCESS); 363 default: 364 365 return (DDI_FAILURE); 366 } 367 368 /* 369 * Allocate softstate information and get softstate pointer 370 */ 371 if (ddi_soft_state_zalloc(hid_statep, instance) == DDI_SUCCESS) { 372 hidp = ddi_get_soft_state(hid_statep, instance); 373 } 374 if (hidp == NULL) { 375 376 goto fail; 377 } 378 379 hidp->hid_log_handle = usb_alloc_log_hdl(dip, NULL, &hid_errlevel, 380 &hid_errmask, &hid_instance_debug, 0); 381 382 hidp->hid_instance = instance; 383 hidp->hid_dip = dip; 384 385 /* 386 * Register with USBA. Just retrieve interface descriptor 387 */ 388 if (usb_client_attach(dip, USBDRV_VERSION, 0) != USB_SUCCESS) { 389 USB_DPRINTF_L2(PRINT_MASK_ATTA, hidp->hid_log_handle, 390 "hid_attach: client attach failed"); 391 392 goto fail; 393 } 394 395 if (usb_get_dev_data(dip, &dev_data, USB_PARSE_LVL_IF, 0) != 396 USB_SUCCESS) { 397 398 USB_DPRINTF_L2(PRINT_MASK_ATTA, hidp->hid_log_handle, 399 "hid_attach: usb_get_dev_data() failed"); 400 401 goto fail; 402 } 403 404 /* initialize mutex */ 405 mutex_init(&hidp->hid_mutex, NULL, MUTEX_DRIVER, 406 dev_data->dev_iblock_cookie); 407 408 hidp->hid_attach_flags |= HID_LOCK_INIT; 409 410 /* get interface data for alternate 0 */ 411 altif_data = &dev_data->dev_curr_cfg-> 412 cfg_if[dev_data->dev_curr_if].if_alt[0]; 413 414 mutex_enter(&hidp->hid_mutex); 415 hidp->hid_dev_data = dev_data; 416 hidp->hid_dev_descr = dev_data->dev_descr; 417 hidp->hid_interfaceno = dev_data->dev_curr_if; 418 hidp->hid_if_descr = altif_data->altif_descr; 419 /* 420 * Make sure that the bInterfaceProtocol only has meaning to 421 * Boot Interface Subclass. 422 */ 423 if (hidp->hid_if_descr.bInterfaceSubClass != BOOT_INTERFACE) 424 hidp->hid_if_descr.bInterfaceProtocol = NONE_PROTOCOL; 425 mutex_exit(&hidp->hid_mutex); 426 427 if ((ep_data = usb_lookup_ep_data(dip, dev_data, 428 hidp->hid_interfaceno, 0, 0, 429 (uint_t)USB_EP_ATTR_INTR, (uint_t)USB_EP_DIR_IN)) == NULL) { 430 431 USB_DPRINTF_L2(PRINT_MASK_ATTA, hidp->hid_log_handle, 432 "no interrupt IN endpoint found"); 433 434 goto fail; 435 } 436 437 mutex_enter(&hidp->hid_mutex); 438 hidp->hid_ep_intr_descr = ep_data->ep_descr; 439 440 /* 441 * Attempt to find the hid descriptor, it could be after interface 442 * or after endpoint descriptors 443 */ 444 if (hid_parse_hid_descr(&hidp->hid_hid_descr, USB_HID_DESCR_SIZE, 445 altif_data, ep_data) != USB_HID_DESCR_SIZE) { 446 /* 447 * If parsing of hid descriptor failed and 448 * the device is a keyboard or mouse, use predefined 449 * length and packet size. 450 */ 451 if (hid_parse_hid_descr_failure(hidp) == USB_FAILURE) { 452 mutex_exit(&hidp->hid_mutex); 453 454 goto fail; 455 } 456 457 /* 458 * hid descriptor was bad but since 459 * the device is a keyboard or mouse, 460 * we will use the default length 461 * and packet size. 462 */ 463 parse_hid_descr_error = HID_BAD_DESCR; 464 } else { 465 /* Parse hid descriptor successful */ 466 467 USB_DPRINTF_L3(PRINT_MASK_ATTA, hidp->hid_log_handle, 468 "Hid descriptor:\n\t" 469 "bLength = 0x%x bDescriptorType = 0x%x " 470 "bcdHID = 0x%x\n\t" 471 "bCountryCode = 0x%x bNumDescriptors = 0x%x\n\t" 472 "bReportDescriptorType = 0x%x\n\t" 473 "wReportDescriptorLength = 0x%x", 474 hidp->hid_hid_descr.bLength, 475 hidp->hid_hid_descr.bDescriptorType, 476 hidp->hid_hid_descr.bcdHID, 477 hidp->hid_hid_descr.bCountryCode, 478 hidp->hid_hid_descr.bNumDescriptors, 479 hidp->hid_hid_descr.bReportDescriptorType, 480 hidp->hid_hid_descr.wReportDescriptorLength); 481 } 482 483 /* 484 * Save a copy of the default pipe for easy reference 485 */ 486 hidp->hid_default_pipe = hidp->hid_dev_data->dev_default_ph; 487 488 /* we copied the descriptors we need, free the dev_data */ 489 usb_free_dev_data(dip, dev_data); 490 hidp->hid_dev_data = NULL; 491 492 /* 493 * Don't get the report descriptor if parsing hid descriptor earlier 494 * failed since device probably won't return valid report descriptor 495 * either. Though parsing of hid descriptor failed, we have reached 496 * this point because the device has been identified as a 497 * keyboard or a mouse successfully and the default packet 498 * size and layout(in case of keyboard only) will be used, so it 499 * is ok to go ahead even if parsing of hid descriptor failed and 500 * we will not try to get the report descriptor. 501 */ 502 if (parse_hid_descr_error != HID_BAD_DESCR) { 503 /* 504 * Sun mouse rev 105 is a bit slow in responding to this 505 * request and requires multiple retries 506 */ 507 int retry; 508 509 /* 510 * Get and parse the report descriptor. 511 * Set the packet size if parsing is successful. 512 * Note that we start retry at 1 to have a delay 513 * in the first iteration. 514 */ 515 mutex_exit(&hidp->hid_mutex); 516 for (retry = 1; retry < HID_RETRY; retry++) { 517 if (hid_handle_report_descriptor(hidp, 518 hidp->hid_interfaceno) == USB_SUCCESS) { 519 break; 520 } 521 delay(retry * drv_usectohz(1000)); 522 } 523 if (retry >= HID_RETRY) { 524 525 goto fail; 526 } 527 mutex_enter(&hidp->hid_mutex); 528 529 /* 530 * If packet size is zero, but the device is identified 531 * as a mouse or a keyboard, use predefined packet 532 * size. 533 */ 534 if (hidp->hid_packet_size == 0) { 535 if (hidp->hid_if_descr.bInterfaceProtocol == 536 KEYBOARD_PROTOCOL) { 537 /* device is a keyboard */ 538 hidp->hid_packet_size = USBKPSZ; 539 } else if (hidp-> 540 hid_if_descr.bInterfaceProtocol == 541 MOUSE_PROTOCOL) { 542 /* device is a mouse */ 543 hidp->hid_packet_size = USBMSSZ; 544 } else { 545 USB_DPRINTF_L2(PRINT_MASK_ATTA, 546 hidp->hid_log_handle, 547 "Failed to find hid packet size"); 548 mutex_exit(&hidp->hid_mutex); 549 550 goto fail; 551 } 552 } 553 } 554 555 /* 556 * initialize the pipe policy for the interrupt pipe. 557 */ 558 hidp->hid_intr_pipe_policy.pp_max_async_reqs = 1; 559 560 /* 561 * Make a clas specific request to SET_IDLE 562 * In this case send no reports if state has not changed. 563 * See HID 7.2.4. 564 */ 565 mutex_exit(&hidp->hid_mutex); 566 hid_set_idle(hidp); 567 568 /* always initialize to report protocol */ 569 hid_set_protocol(hidp, SET_REPORT_PROTOCOL); 570 mutex_enter(&hidp->hid_mutex); 571 572 /* 573 * Create minor node based on information from the 574 * descriptors 575 */ 576 switch (hidp->hid_if_descr.bInterfaceProtocol) { 577 case KEYBOARD_PROTOCOL: 578 (void) strcpy(minor_name, "keyboard"); 579 580 break; 581 case MOUSE_PROTOCOL: 582 (void) strcpy(minor_name, "mouse"); 583 584 break; 585 default: 586 if (hidparser_get_top_level_collection_usage( 587 hidp->hid_report_descr, &usage_page, &usage) != 588 HIDPARSER_FAILURE) { 589 switch (usage_page) { 590 case HID_CONSUMER: 591 switch (usage) { 592 case HID_CONSUMER_CONTROL: 593 (void) strcpy(minor_name, 594 "consumer_control"); 595 596 break; 597 default: 598 (void) sprintf(minor_name, 599 "hid_%d_%d", usage_page, usage); 600 601 break; 602 } 603 604 break; 605 case HID_GENERIC_DESKTOP: 606 switch (usage) { 607 case HID_GD_POINTER: 608 (void) strcpy(minor_name, 609 "pointer"); 610 611 break; 612 case HID_GD_MOUSE: 613 (void) strcpy(minor_name, 614 "mouse"); 615 616 break; 617 case HID_GD_KEYBOARD: 618 (void) strcpy(minor_name, 619 "keyboard"); 620 621 break; 622 default: 623 (void) sprintf(minor_name, 624 "hid_%d_%d", usage_page, usage); 625 626 break; 627 } 628 629 break; 630 default: 631 (void) sprintf(minor_name, 632 "hid_%d_%d", usage_page, usage); 633 634 break; 635 } 636 } else { 637 USB_DPRINTF_L1(PRINT_MASK_ATTA, hidp->hid_log_handle, 638 "hid_attach: Unsupported HID device"); 639 mutex_exit(&hidp->hid_mutex); 640 641 goto fail; 642 } 643 644 break; 645 } 646 647 mutex_exit(&hidp->hid_mutex); 648 649 if ((ddi_create_minor_node(dip, minor_name, S_IFCHR, 650 HID_CONSTRUCT_EXTERNAL_MINOR(instance), 651 DDI_PSEUDO, 0)) != DDI_SUCCESS) { 652 USB_DPRINTF_L2(PRINT_MASK_ATTA, hidp->hid_log_handle, 653 "hid_attach: Could not create minor node"); 654 655 goto fail; 656 } 657 658 hidp->hid_km = B_FALSE; 659 660 /* create internal path for virtual */ 661 if (strcmp(minor_name, "mouse") == 0) { 662 hidp->hid_km = B_TRUE; /* mouse */ 663 if (ddi_create_internal_pathname(dip, "internal_mouse", S_IFCHR, 664 HID_CONSTRUCT_INTERNAL_MINOR(instance)) != DDI_SUCCESS) { 665 666 goto fail; 667 } 668 } 669 670 if (strcmp(minor_name, "keyboard") == 0) { 671 hidp->hid_km = B_TRUE; /* keyboard */ 672 if (ddi_create_internal_pathname(dip, "internal_keyboard", 673 S_IFCHR, HID_CONSTRUCT_INTERNAL_MINOR(instance)) != 674 DDI_SUCCESS) { 675 676 goto fail; 677 } 678 } 679 680 mutex_enter(&hidp->hid_mutex); 681 hidp->hid_attach_flags |= HID_MINOR_NODES; 682 hidp->hid_dev_state = USB_DEV_ONLINE; 683 mutex_exit(&hidp->hid_mutex); 684 685 /* register for all events */ 686 if (usb_register_event_cbs(dip, &hid_events, 0) != USB_SUCCESS) { 687 USB_DPRINTF_L2(PRINT_MASK_ATTA, hidp->hid_log_handle, 688 "usb_register_event_cbs failed"); 689 690 goto fail; 691 } 692 693 /* now create components to power manage this device */ 694 hid_create_pm_components(dip, hidp); 695 hid_pm_busy_component(hidp); 696 (void) pm_raise_power(dip, 0, USB_DEV_OS_FULL_PWR); 697 hid_pm_idle_component(hidp); 698 699 /* 700 * report device 701 */ 702 ddi_report_dev(dip); 703 704 USB_DPRINTF_L4(PRINT_MASK_ATTA, hidp->hid_log_handle, 705 "hid_attach: End"); 706 707 return (DDI_SUCCESS); 708 709 fail: 710 if (hidp) { 711 USB_DPRINTF_L2(PRINT_MASK_ATTA, hidp->hid_log_handle, 712 "hid_attach: fail"); 713 hid_detach_cleanup(dip, hidp); 714 } 715 716 return (DDI_FAILURE); 717 } 718 719 720 /* 721 * hid_detach : 722 * Gets called at the time of detach. 723 */ 724 static int 725 hid_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) 726 { 727 int instance = ddi_get_instance(dip); 728 hid_state_t *hidp; 729 int rval = DDI_FAILURE; 730 731 hidp = ddi_get_soft_state(hid_statep, instance); 732 733 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, "hid_detach"); 734 735 switch (cmd) { 736 case DDI_DETACH: 737 /* 738 * Undo what we did in client_attach, freeing resources 739 * and removing things we installed. The system 740 * framework guarantees we are not active with this devinfo 741 * node in any other entry points at this time. 742 */ 743 hid_detach_cleanup(dip, hidp); 744 745 return (DDI_SUCCESS); 746 case DDI_SUSPEND: 747 rval = hid_cpr_suspend(hidp); 748 749 return (rval == USB_SUCCESS ? DDI_SUCCESS : DDI_FAILURE); 750 default: 751 break; 752 } 753 754 return (rval); 755 } 756 757 758 /* 759 * hid_open : 760 * Open entry point: Opens the interrupt pipe. Sets up queues. 761 */ 762 /*ARGSUSED*/ 763 static int 764 hid_open(queue_t *q, dev_t *devp, int flag, int sflag, cred_t *credp) 765 { 766 int no_of_ep = 0; 767 int rval; 768 int instance; 769 hid_state_t *hidp; 770 ddi_taskq_t *taskq; 771 char taskqname[32]; 772 minor_t minor = getminor(*devp); 773 774 instance = HID_MINOR_TO_INSTANCE(minor); 775 776 hidp = ddi_get_soft_state(hid_statep, instance); 777 if (hidp == NULL) { 778 779 return (ENXIO); 780 } 781 782 USB_DPRINTF_L4(PRINT_MASK_OPEN, hidp->hid_log_handle, 783 "hid_open: Begin"); 784 785 if (sflag) { 786 /* clone open NOT supported here */ 787 788 return (ENXIO); 789 } 790 791 mutex_enter(&hidp->hid_mutex); 792 793 /* 794 * This is a workaround: 795 * Currently, if we open an already disconnected device, and send 796 * a CONSOPENPOLL ioctl to it, the system will panic, please refer 797 * to the processing HID_OPEN_POLLED_INPUT ioctl in the routine 798 * hid_mctl_receive(). 799 * The consconfig_dacf module need this interface to detect if the 800 * device is already disconnnected. 801 */ 802 if (HID_IS_INTERNAL_OPEN(minor) && 803 (hidp->hid_dev_state == USB_DEV_DISCONNECTED)) { 804 mutex_exit(&hidp->hid_mutex); 805 806 return (ENODEV); 807 } 808 809 if (q->q_ptr || (hidp->hid_streams_flags == HID_STREAMS_OPEN)) { 810 /* 811 * Exit if the same minor node is already open 812 */ 813 if (!hidp->hid_km || hidp->hid_minor == minor) { 814 mutex_exit(&hidp->hid_mutex); 815 816 return (0); 817 } 818 819 /* 820 * Check whether it is switch between physical and virtual 821 * 822 * Opening from virtual while the device is being physically 823 * opened by an application should not happen. So we ASSERT 824 * this in DEBUG version, and return error in the non-DEBUG 825 * case. 826 */ 827 ASSERT(!HID_IS_INTERNAL_OPEN(minor)); 828 829 if (HID_IS_INTERNAL_OPEN(minor)) { 830 mutex_exit(&hidp->hid_mutex); 831 832 return (EINVAL); 833 } 834 835 /* 836 * Opening the physical one while it is being underneath 837 * the virtual one. 838 * 839 * consconfig_unlink is called to unlink this device from 840 * the virtual one, thus the old stream serving for this 841 * device under the virtual one is closed, and then the 842 * lower driver's close routine (here is hid_close) is also 843 * called to accomplish the whole stream close. Here we have 844 * to drop the lock because hid_close also needs the lock. 845 * 846 * For keyboard, the old stream is: 847 * conskbd->["pushmod"->]"kbd_vp driver" 848 * For mouse, the old stream is: 849 * consms->["pushmod"->]"mouse_vp driver" 850 * 851 * After the consconfig_unlink returns, the old stream is closed 852 * and we grab the lock again to reopen this device as normal. 853 */ 854 mutex_exit(&hidp->hid_mutex); 855 856 /* 857 * We create a taskq with one thread, which will be used at the 858 * time of closing physical keyboard, refer to hid_close(). 859 */ 860 (void) sprintf(taskqname, "hid_taskq_%d", instance); 861 taskq = ddi_taskq_create(hidp->hid_dip, taskqname, 1, 862 TASKQ_DEFAULTPRI, 0); 863 864 if (!taskq) { 865 USB_DPRINTF_L3(PRINT_MASK_ALL, hidp->hid_log_handle, 866 "hid_open: device is temporarily unavailable," 867 " try it later"); 868 869 return (EAGAIN); 870 } 871 872 /* 873 * If unlink fails, fail the physical open. 874 */ 875 if ((rval = consconfig_unlink(ddi_driver_major(hidp->hid_dip), 876 HID_MINOR_MAKE_INTERNAL(minor))) != 0) { 877 ddi_taskq_destroy(taskq); 878 879 return (rval); 880 } 881 882 mutex_enter(&hidp->hid_mutex); 883 884 ASSERT(!hidp->hid_taskq); 885 hidp->hid_taskq = taskq; 886 } 887 888 /* Initialize the queue pointers */ 889 q->q_ptr = hidp; 890 WR(q)->q_ptr = hidp; 891 892 hidp->hid_rq_ptr = q; 893 hidp->hid_wq_ptr = WR(q); 894 895 if (flag & FREAD) { 896 hidp->hid_interrupt_pipe = NULL; 897 no_of_ep = hidp->hid_if_descr.bNumEndpoints; 898 899 /* Check if interrupt endpoint exists */ 900 if (no_of_ep > 0) { 901 /* Open the interrupt pipe */ 902 mutex_exit(&hidp->hid_mutex); 903 904 if (usb_pipe_open(hidp->hid_dip, 905 &hidp->hid_ep_intr_descr, 906 &hidp->hid_intr_pipe_policy, USB_FLAGS_SLEEP, 907 &hidp->hid_interrupt_pipe) != 908 USB_SUCCESS) { 909 910 return (EIO); 911 } 912 mutex_enter(&hidp->hid_mutex); 913 } 914 } else { 915 /* NOT FREAD */ 916 mutex_exit(&hidp->hid_mutex); 917 918 return (EIO); 919 } 920 mutex_exit(&hidp->hid_mutex); 921 922 hid_pm_busy_component(hidp); 923 (void) pm_raise_power(hidp->hid_dip, 0, USB_DEV_OS_FULL_PWR); 924 925 mutex_enter(&hidp->hid_mutex); 926 hidp->hid_streams_flags = HID_STREAMS_OPEN; 927 mutex_exit(&hidp->hid_mutex); 928 929 qprocson(q); 930 931 mutex_enter(&hidp->hid_mutex); 932 933 if ((rval = hid_start_intr_polling(hidp)) != USB_SUCCESS) { 934 USB_DPRINTF_L2(PRINT_MASK_OPEN, hidp->hid_log_handle, 935 "unable to start intr pipe polling. rval = %d", rval); 936 937 hidp->hid_streams_flags = HID_STREAMS_DISMANTLING; 938 mutex_exit(&hidp->hid_mutex); 939 940 usb_pipe_close(hidp->hid_dip, hidp->hid_interrupt_pipe, 941 USB_FLAGS_SLEEP, NULL, NULL); 942 943 mutex_enter(&hidp->hid_mutex); 944 hidp->hid_interrupt_pipe = NULL; 945 mutex_exit(&hidp->hid_mutex); 946 947 qprocsoff(q); 948 hid_pm_idle_component(hidp); 949 950 return (EIO); 951 } 952 hidp->hid_minor = minor; 953 mutex_exit(&hidp->hid_mutex); 954 955 USB_DPRINTF_L4(PRINT_MASK_OPEN, hidp->hid_log_handle, "hid_open: End"); 956 957 /* 958 * Keyboard and mouse is Power managed by device activity. 959 * All other devices go busy on open and idle on close. 960 */ 961 switch (hidp->hid_pm->hid_pm_strategy) { 962 case HID_PM_ACTIVITY: 963 hid_pm_idle_component(hidp); 964 965 break; 966 default: 967 968 break; 969 } 970 971 return (0); 972 } 973 974 975 /* 976 * hid_close : 977 * Close entry point. 978 */ 979 /*ARGSUSED*/ 980 static int 981 hid_close(queue_t *q, int flag, cred_t *credp) 982 { 983 hid_state_t *hidp = q->q_ptr; 984 ddi_taskq_t *taskq; 985 queue_t *wq; 986 mblk_t *mp; 987 988 USB_DPRINTF_L4(PRINT_MASK_CLOSE, hidp->hid_log_handle, "hid_close:"); 989 990 mutex_enter(&hidp->hid_mutex); 991 hidp->hid_streams_flags = HID_STREAMS_DISMANTLING; 992 hid_close_intr_pipe(hidp); 993 mutex_exit(&hidp->hid_mutex); 994 995 /* 996 * In case there are any outstanding requests on 997 * the default pipe, wait forever for them to complete. 998 */ 999 (void) usb_pipe_drain_reqs(hidp->hid_dip, 1000 hidp->hid_default_pipe, 0, USB_FLAGS_SLEEP, NULL, 0); 1001 1002 /* drain any M_CTLS on the WQ */ 1003 mutex_enter(&hidp->hid_mutex); 1004 wq = hidp->hid_wq_ptr; 1005 while (mp = getq(wq)) { 1006 hid_qreply_merror(wq, mp, EIO); 1007 mutex_exit(&hidp->hid_mutex); 1008 hid_pm_idle_component(hidp); 1009 mutex_enter(&hidp->hid_mutex); 1010 } 1011 mutex_exit(&hidp->hid_mutex); 1012 1013 qprocsoff(q); 1014 q->q_ptr = NULL; 1015 1016 /* 1017 * Devices other than keyboard/mouse go idle on close. 1018 */ 1019 switch (hidp->hid_pm->hid_pm_strategy) { 1020 case HID_PM_ACTIVITY: 1021 1022 break; 1023 default: 1024 hid_pm_idle_component(hidp); 1025 1026 break; 1027 } 1028 USB_DPRINTF_L4(PRINT_MASK_CLOSE, hidp->hid_log_handle, 1029 "hid_close: End"); 1030 1031 if (hidp->hid_km && !HID_IS_INTERNAL_OPEN(hidp->hid_minor)) { 1032 /* 1033 * Closing physical keyboard/mouse 1034 * 1035 * Link it back to virtual keyboard/mouse, 1036 * and hid_open will be called as a result 1037 * of the consconfig_link call. 1038 * 1039 * If linking back fails, this specific device 1040 * will not be available underneath the virtual 1041 * one, and can only be accessed via physical 1042 * open. 1043 * 1044 * Up to now, we have been running in a thread context 1045 * which has corresponding LWP and proc context. This 1046 * thread represents a user thread executing in kernel 1047 * mode. The action of linking current keyboard to virtual 1048 * keyboard is completely a kernel action. It should not 1049 * be executed in a user thread context. So, we start a 1050 * new kernel thread to relink the keyboard to virtual 1051 * keyboard. 1052 */ 1053 mutex_enter(&hidp->hid_mutex); 1054 taskq = hidp->hid_taskq; 1055 hidp->hid_taskq = NULL; 1056 mutex_exit(&hidp->hid_mutex); 1057 (void) ddi_taskq_dispatch(taskq, hid_consconfig_relink, 1058 hidp, DDI_SLEEP); 1059 ddi_taskq_wait(taskq); 1060 ddi_taskq_destroy(taskq); 1061 } 1062 1063 return (0); 1064 } 1065 1066 1067 /* 1068 * hid_wput : 1069 * write put routine for the hid module 1070 */ 1071 static int 1072 hid_wput(queue_t *q, mblk_t *mp) 1073 { 1074 int error = USB_SUCCESS; 1075 hid_state_t *hidp = (hid_state_t *)q->q_ptr; 1076 1077 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 1078 "hid_wput: Begin"); 1079 1080 /* See if the upper module is passing the right thing */ 1081 ASSERT(mp != NULL); 1082 ASSERT(mp->b_datap != NULL); 1083 1084 switch (mp->b_datap->db_type) { 1085 case M_FLUSH: /* Canonical flush handling */ 1086 if (*mp->b_rptr & FLUSHW) { 1087 flushq(q, FLUSHDATA); 1088 } 1089 1090 /* read queue not used so just send up */ 1091 if (*mp->b_rptr & FLUSHR) { 1092 *mp->b_rptr &= ~FLUSHW; 1093 qreply(q, mp); 1094 } else { 1095 freemsg(mp); 1096 } 1097 1098 break; 1099 case M_IOCTL: 1100 hid_ioctl(q, mp); 1101 1102 break; 1103 case M_CTL: 1104 /* we are busy now */ 1105 hid_pm_busy_component(hidp); 1106 1107 if (q->q_first) { 1108 (void) putq(q, mp); 1109 } else { 1110 error = hid_mctl_receive(q, mp); 1111 switch (error) { 1112 case HID_ENQUEUE: 1113 /* 1114 * put this mblk on the WQ for the wsrv to 1115 * process 1116 */ 1117 (void) putq(q, mp); 1118 1119 break; 1120 case HID_INPROGRESS: 1121 /* request has been queued to the device */ 1122 1123 break; 1124 case HID_SUCCESS: 1125 /* 1126 * returned by M_CTLS that are processed 1127 * immediately 1128 */ 1129 1130 /* FALLTHRU */ 1131 case HID_FAILURE: 1132 default: 1133 hid_pm_idle_component(hidp); 1134 break; 1135 } 1136 } 1137 break; 1138 default: 1139 hid_qreply_merror(q, mp, EINVAL); 1140 error = USB_FAILURE; 1141 break; 1142 } 1143 1144 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 1145 "hid_wput: End"); 1146 1147 return (DDI_SUCCESS); 1148 } 1149 1150 1151 /* 1152 * hid_wsrv : 1153 * Write service routine for hid. When a message arrives through 1154 * hid_wput(), it is kept in write queue to be serviced later. 1155 */ 1156 static int 1157 hid_wsrv(queue_t *q) 1158 { 1159 int error; 1160 mblk_t *mp; 1161 hid_state_t *hidp = (hid_state_t *)q->q_ptr; 1162 1163 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 1164 "hid_wsrv: Begin"); 1165 1166 mutex_enter(&hidp->hid_mutex); 1167 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 1168 "hid_wsrv: dev_state: %s", 1169 usb_str_dev_state(hidp->hid_dev_state)); 1170 1171 /* 1172 * raise power if we are powered down. It is OK to block here since 1173 * we have a separate thread to process this STREAM 1174 */ 1175 if (hidp->hid_dev_state == USB_DEV_PWRED_DOWN) { 1176 mutex_exit(&hidp->hid_mutex); 1177 (void) pm_raise_power(hidp->hid_dip, 0, USB_DEV_OS_FULL_PWR); 1178 mutex_enter(&hidp->hid_mutex); 1179 } 1180 1181 /* 1182 * continue servicing all the M_CTL's till the queue is empty 1183 * or the device gets disconnected or till a hid_close() 1184 */ 1185 while ((hidp->hid_dev_state == USB_DEV_ONLINE) && 1186 (hidp->hid_streams_flags != HID_STREAMS_DISMANTLING) && 1187 ((mp = getq(q)) != NULL)) { 1188 1189 /* Send a message down */ 1190 mutex_exit(&hidp->hid_mutex); 1191 error = hid_mctl_receive(q, mp); 1192 switch (error) { 1193 case HID_ENQUEUE: 1194 /* put this mblk back on q to preserve order */ 1195 (void) putbq(q, mp); 1196 1197 break; 1198 case HID_INPROGRESS: 1199 /* request has been queued to the device */ 1200 1201 break; 1202 case HID_SUCCESS: 1203 case HID_FAILURE: 1204 default: 1205 hid_pm_idle_component(hidp); 1206 1207 break; 1208 } 1209 mutex_enter(&hidp->hid_mutex); 1210 } 1211 mutex_exit(&hidp->hid_mutex); 1212 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 1213 "hid_wsrv: End"); 1214 1215 return (DDI_SUCCESS); 1216 } 1217 1218 1219 /* 1220 * hid_power: 1221 * power entry point 1222 */ 1223 static int 1224 hid_power(dev_info_t *dip, int comp, int level) 1225 { 1226 int instance = ddi_get_instance(dip); 1227 hid_state_t *hidp; 1228 hid_power_t *hidpm; 1229 int retval; 1230 1231 hidp = ddi_get_soft_state(hid_statep, instance); 1232 1233 USB_DPRINTF_L3(PRINT_MASK_PM, hidp->hid_log_handle, "hid_power:" 1234 " hid_state: comp=%d level=%d", comp, level); 1235 1236 /* check if we are transitioning to a legal power level */ 1237 mutex_enter(&hidp->hid_mutex); 1238 hidpm = hidp->hid_pm; 1239 1240 if (USB_DEV_PWRSTATE_OK(hidpm->hid_pwr_states, level)) { 1241 1242 USB_DPRINTF_L2(PRINT_MASK_PM, hidp->hid_log_handle, 1243 "hid_power: illegal level=%d hid_pwr_states=%d", 1244 level, hidpm->hid_pwr_states); 1245 1246 mutex_exit(&hidp->hid_mutex); 1247 1248 return (DDI_FAILURE); 1249 } 1250 1251 switch (level) { 1252 case USB_DEV_OS_PWR_OFF: 1253 retval = hid_pwrlvl0(hidp); 1254 break; 1255 case USB_DEV_OS_PWR_1: 1256 retval = hid_pwrlvl1(hidp); 1257 break; 1258 case USB_DEV_OS_PWR_2: 1259 retval = hid_pwrlvl2(hidp); 1260 break; 1261 case USB_DEV_OS_FULL_PWR: 1262 retval = hid_pwrlvl3(hidp); 1263 break; 1264 default: 1265 retval = USB_FAILURE; 1266 break; 1267 } 1268 1269 mutex_exit(&hidp->hid_mutex); 1270 1271 return ((retval == USB_SUCCESS) ? DDI_SUCCESS : DDI_FAILURE); 1272 } 1273 1274 1275 /* 1276 * hid_interrupt_pipe_callback: 1277 * Callback function for the hid intr pipe. This function is called by 1278 * USBA when a buffer has been filled. This driver does not cook the data, 1279 * it just sends the message up. 1280 */ 1281 static void 1282 hid_interrupt_pipe_callback(usb_pipe_handle_t pipe, usb_intr_req_t *req) 1283 { 1284 hid_state_t *hidp = (hid_state_t *)req->intr_client_private; 1285 queue_t *q; 1286 1287 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 1288 "hid_interrupt_pipe_callback: ph = 0x%p req = 0x%p", pipe, req); 1289 1290 hid_pm_busy_component(hidp); 1291 1292 mutex_enter(&hidp->hid_mutex); 1293 1294 /* 1295 * If hid_close() is in progress, we shouldn't try accessing queue 1296 * Otherwise indicate that a putnext is going to happen, so 1297 * if close after this, that should wait for the putnext to finish. 1298 */ 1299 if (hidp->hid_streams_flags != HID_STREAMS_DISMANTLING) { 1300 /* 1301 * Check if data can be put to the next queue. 1302 */ 1303 if (!canputnext(hidp->hid_rq_ptr)) { 1304 USB_DPRINTF_L2(PRINT_MASK_ALL, hidp->hid_log_handle, 1305 "Buffer flushed when overflowed."); 1306 1307 /* Flush the queue above */ 1308 hid_flush(hidp->hid_rq_ptr); 1309 mutex_exit(&hidp->hid_mutex); 1310 } else { 1311 q = hidp->hid_rq_ptr; 1312 mutex_exit(&hidp->hid_mutex); 1313 1314 /* Put data upstream */ 1315 putnext(q, req->intr_data); 1316 1317 /* usb_free_intr_req should not free data */ 1318 req->intr_data = NULL; 1319 } 1320 } else { 1321 mutex_exit(&hidp->hid_mutex); 1322 } 1323 1324 /* free request and data */ 1325 usb_free_intr_req(req); 1326 hid_pm_idle_component(hidp); 1327 } 1328 1329 1330 /* 1331 * hid_default_pipe_callback : 1332 * Callback routine for the asynchronous control transfer 1333 * Called from hid_send_async_ctrl_request() where we open 1334 * the pipe in exclusive mode 1335 */ 1336 static void 1337 hid_default_pipe_callback(usb_pipe_handle_t pipe, usb_ctrl_req_t *req) 1338 { 1339 hid_default_pipe_arg_t *hid_default_pipe_arg = 1340 (hid_default_pipe_arg_t *)req->ctrl_client_private; 1341 hid_state_t *hidp = hid_default_pipe_arg->hid_default_pipe_arg_hidp; 1342 mblk_t *mctl_mp; 1343 mblk_t *data = NULL; 1344 queue_t *q; 1345 1346 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 1347 "hid_default_pipe_callback: " 1348 "ph = 0x%p, req = 0x%p, data= 0x%p", pipe, req, data); 1349 1350 ASSERT((req->ctrl_cb_flags & USB_CB_INTR_CONTEXT) == 0); 1351 1352 if (req->ctrl_data) { 1353 data = req->ctrl_data; 1354 req->ctrl_data = NULL; 1355 } 1356 1357 /* 1358 * Free the b_cont of the original message that was sent down. 1359 */ 1360 mctl_mp = hid_default_pipe_arg->hid_default_pipe_arg_mblk; 1361 freemsg(mctl_mp->b_cont); 1362 1363 /* chain the mblk received to the original & send it up */ 1364 mctl_mp->b_cont = data; 1365 mutex_enter(&hidp->hid_mutex); 1366 q = hidp->hid_rq_ptr; 1367 mutex_exit(&hidp->hid_mutex); 1368 if (canputnext(q)) { 1369 putnext(q, mctl_mp); 1370 } else { 1371 freemsg(mctl_mp); /* avoid leak */ 1372 } 1373 1374 /* 1375 * Free the argument for the asynchronous callback 1376 */ 1377 kmem_free(hid_default_pipe_arg, sizeof (hid_default_pipe_arg_t)); 1378 1379 /* 1380 * Free the control pipe request structure. 1381 */ 1382 usb_free_ctrl_req(req); 1383 1384 mutex_enter(&hidp->hid_mutex); 1385 hidp->hid_default_pipe_req--; 1386 ASSERT(hidp->hid_default_pipe_req >= 0); 1387 mutex_exit(&hidp->hid_mutex); 1388 1389 hid_pm_idle_component(hidp); 1390 qenable(hidp->hid_wq_ptr); 1391 } 1392 1393 1394 /* 1395 * hid_interrupt_pipe_exception_callback: 1396 * Exception callback routine for interrupt pipe. If there is any data, 1397 * destroy it. No threads are waiting for the exception callback. 1398 */ 1399 /*ARGSUSED*/ 1400 static void 1401 hid_interrupt_pipe_exception_callback(usb_pipe_handle_t pipe, 1402 usb_intr_req_t *req) 1403 { 1404 hid_state_t *hidp = (hid_state_t *)req->intr_client_private; 1405 mblk_t *data = req->intr_data; 1406 usb_cb_flags_t flags = req->intr_cb_flags; 1407 int rval; 1408 1409 USB_DPRINTF_L2(PRINT_MASK_ALL, hidp->hid_log_handle, 1410 "hid_interrupt_pipe_exception_callback: " 1411 "completion_reason = 0x%x, data = 0x%p, flag = 0x%x", 1412 req->intr_completion_reason, (void *)data, req->intr_cb_flags); 1413 1414 ASSERT((req->intr_cb_flags & USB_CB_INTR_CONTEXT) == 0); 1415 1416 if (((flags & USB_CB_FUNCTIONAL_STALL) != 0) && 1417 ((flags & USB_CB_STALL_CLEARED) == 0)) { 1418 USB_DPRINTF_L2(PRINT_MASK_ALL, 1419 hidp->hid_log_handle, 1420 "hid_interrupt_pipe_exception_callback: " 1421 "unable to clear stall. flags = 0x%x", 1422 req->intr_cb_flags); 1423 } 1424 1425 mutex_enter(&hidp->hid_mutex); 1426 1427 switch (req->intr_completion_reason) { 1428 case USB_CR_STOPPED_POLLING: 1429 case USB_CR_PIPE_CLOSING: 1430 default: 1431 1432 break; 1433 case USB_CR_PIPE_RESET: 1434 case USB_CR_NO_RESOURCES: 1435 if ((hidp->hid_dev_state == USB_DEV_ONLINE) && 1436 ((rval = hid_start_intr_polling(hidp)) != 1437 USB_SUCCESS)) { 1438 USB_DPRINTF_L2(PRINT_MASK_ALL, hidp->hid_log_handle, 1439 "unable to restart interrupt poll. rval = %d", 1440 rval); 1441 } 1442 1443 break; 1444 } 1445 1446 mutex_exit(&hidp->hid_mutex); 1447 1448 usb_free_intr_req(req); 1449 } 1450 1451 1452 /* 1453 * hid_default_pipe_exception_callback: 1454 * Exception callback routine for default pipe. 1455 */ 1456 /*ARGSUSED*/ 1457 static void 1458 hid_default_pipe_exception_callback(usb_pipe_handle_t pipe, 1459 usb_ctrl_req_t *req) 1460 { 1461 hid_default_pipe_arg_t *hid_default_pipe_arg = 1462 (hid_default_pipe_arg_t *)req->ctrl_client_private; 1463 1464 hid_state_t *hidp = hid_default_pipe_arg->hid_default_pipe_arg_hidp; 1465 mblk_t *data = NULL; 1466 usb_cr_t ctrl_completion_reason = req->ctrl_completion_reason; 1467 mblk_t *mp; 1468 queue_t *q; 1469 1470 USB_DPRINTF_L2(PRINT_MASK_ALL, hidp->hid_log_handle, 1471 "hid_default_pipe_exception_callback: " 1472 "completion_reason = 0x%x, data = 0x%p, flag = 0x%x", 1473 ctrl_completion_reason, (void *)data, req->ctrl_cb_flags); 1474 1475 ASSERT((req->ctrl_cb_flags & USB_CB_INTR_CONTEXT) == 0); 1476 1477 /* 1478 * This is an exception callback, no need to pass data up 1479 */ 1480 q = hidp->hid_rq_ptr; 1481 1482 /* 1483 * Pass an error message up. Reuse existing mblk. 1484 */ 1485 if (canputnext(q)) { 1486 mp = hid_default_pipe_arg->hid_default_pipe_arg_mblk; 1487 mp->b_datap->db_type = M_ERROR; 1488 mp->b_rptr = mp->b_datap->db_base; 1489 mp->b_wptr = mp->b_rptr + sizeof (char); 1490 *mp->b_rptr = EIO; 1491 putnext(q, mp); 1492 } else { 1493 freemsg(hid_default_pipe_arg->hid_default_pipe_arg_mblk); 1494 } 1495 kmem_free(hid_default_pipe_arg, sizeof (hid_default_pipe_arg_t)); 1496 1497 mutex_enter(&hidp->hid_mutex); 1498 hidp->hid_default_pipe_req--; 1499 ASSERT(hidp->hid_default_pipe_req >= 0); 1500 mutex_exit(&hidp->hid_mutex); 1501 1502 qenable(hidp->hid_wq_ptr); 1503 usb_free_ctrl_req(req); 1504 hid_pm_idle_component(hidp); 1505 } 1506 1507 1508 /* 1509 * event handling: 1510 * 1511 * hid_reconnect_event_callback: 1512 * the device was disconnected but this instance not detached, probably 1513 * because the device was busy 1514 * 1515 * If the same device, continue with restoring state 1516 */ 1517 static int 1518 hid_restore_state_event_callback(dev_info_t *dip) 1519 { 1520 hid_state_t *hidp = (hid_state_t *)ddi_get_soft_state(hid_statep, 1521 ddi_get_instance(dip)); 1522 1523 ASSERT(hidp != NULL); 1524 1525 USB_DPRINTF_L3(PRINT_MASK_EVENTS, hidp->hid_log_handle, 1526 "hid_restore_state_event_callback: dip=0x%p", dip); 1527 1528 hid_restore_device_state(dip, hidp); 1529 1530 return (USB_SUCCESS); 1531 } 1532 1533 1534 /* 1535 * hid_cpr_suspend 1536 * Fail suspend if we can't finish outstanding i/o activity. 1537 */ 1538 static int 1539 hid_cpr_suspend(hid_state_t *hidp) 1540 { 1541 int rval, prev_state; 1542 int retval = USB_FAILURE; 1543 1544 USB_DPRINTF_L4(PRINT_MASK_EVENTS, hidp->hid_log_handle, 1545 "hid_cpr_suspend: dip=0x%p", hidp->hid_dip); 1546 1547 mutex_enter(&hidp->hid_mutex); 1548 switch (hidp->hid_dev_state) { 1549 case USB_DEV_ONLINE: 1550 case USB_DEV_PWRED_DOWN: 1551 case USB_DEV_DISCONNECTED: 1552 prev_state = hidp->hid_dev_state; 1553 hidp->hid_dev_state = USB_DEV_SUSPENDED; 1554 mutex_exit(&hidp->hid_mutex); 1555 1556 /* drain all request outstanding on the default control pipe */ 1557 rval = usb_pipe_drain_reqs(hidp->hid_dip, 1558 hidp->hid_default_pipe, hid_default_pipe_drain_timeout, 1559 USB_FLAGS_SLEEP, NULL, 0); 1560 1561 /* fail checkpoint if we haven't finished the job yet */ 1562 mutex_enter(&hidp->hid_mutex); 1563 if ((rval != USB_SUCCESS) || (hidp->hid_default_pipe_req > 0)) { 1564 USB_DPRINTF_L2(PRINT_MASK_EVENTS, hidp->hid_log_handle, 1565 "hid_cpr_suspend: " 1566 "device busy - can't checkpoint"); 1567 1568 /* fall back to previous state */ 1569 hidp->hid_dev_state = prev_state; 1570 } else { 1571 retval = USB_SUCCESS; 1572 hid_save_device_state(hidp); 1573 } 1574 1575 break; 1576 case USB_DEV_SUSPENDED: 1577 default: 1578 USB_DPRINTF_L2(PRINT_MASK_EVENTS, hidp->hid_log_handle, 1579 "hid_cpr_suspend: Illegal dev state: %d", 1580 hidp->hid_dev_state); 1581 1582 break; 1583 } 1584 mutex_exit(&hidp->hid_mutex); 1585 1586 return (retval); 1587 } 1588 1589 1590 static void 1591 hid_cpr_resume(hid_state_t *hidp) 1592 { 1593 USB_DPRINTF_L4(PRINT_MASK_EVENTS, hidp->hid_log_handle, 1594 "hid_cpr_resume: dip=0x%p", hidp->hid_dip); 1595 1596 hid_restore_device_state(hidp->hid_dip, hidp); 1597 } 1598 1599 1600 /* 1601 * hid_disconnect_event_callback: 1602 * The device has been disconnected. We either wait for 1603 * detach or a reconnect event. Close all pipes and timeouts. 1604 */ 1605 static int 1606 hid_disconnect_event_callback(dev_info_t *dip) 1607 { 1608 hid_state_t *hidp; 1609 1610 hidp = (hid_state_t *)ddi_get_soft_state(hid_statep, 1611 ddi_get_instance(dip)); 1612 ASSERT(hidp != NULL); 1613 1614 USB_DPRINTF_L4(PRINT_MASK_EVENTS, hidp->hid_log_handle, 1615 "hid_disconnect_event_callback: dip=0x%p", dip); 1616 1617 mutex_enter(&hidp->hid_mutex); 1618 switch (hidp->hid_dev_state) { 1619 case USB_DEV_ONLINE: 1620 case USB_DEV_PWRED_DOWN: 1621 hidp->hid_dev_state = USB_DEV_DISCONNECTED; 1622 if (hidp->hid_streams_flags == HID_STREAMS_OPEN) { 1623 1624 USB_DPRINTF_L2(PRINT_MASK_EVENTS, hidp->hid_log_handle, 1625 "busy device has been disconnected"); 1626 } 1627 hid_save_device_state(hidp); 1628 1629 break; 1630 case USB_DEV_SUSPENDED: 1631 /* we remain suspended */ 1632 1633 break; 1634 default: 1635 USB_DPRINTF_L2(PRINT_MASK_EVENTS, hidp->hid_log_handle, 1636 "hid_disconnect_event_callback: Illegal dev state: %d", 1637 hidp->hid_dev_state); 1638 1639 break; 1640 } 1641 mutex_exit(&hidp->hid_mutex); 1642 1643 return (USB_SUCCESS); 1644 } 1645 1646 1647 /* 1648 * hid_power_change_callback: 1649 * Async callback function to notify pm_raise_power completion 1650 * after hid_power entry point is called. 1651 */ 1652 static void 1653 hid_power_change_callback(void *arg, int rval) 1654 { 1655 hid_state_t *hidp; 1656 queue_t *wq; 1657 1658 hidp = (hid_state_t *)arg; 1659 1660 USB_DPRINTF_L4(PRINT_MASK_PM, hidp->hid_log_handle, 1661 "hid_power_change_callback - rval: %d", rval); 1662 1663 mutex_enter(&hidp->hid_mutex); 1664 hidp->hid_pm->hid_raise_power = B_FALSE; 1665 1666 if (hidp->hid_dev_state == USB_DEV_ONLINE) { 1667 wq = hidp->hid_wq_ptr; 1668 mutex_exit(&hidp->hid_mutex); 1669 1670 qenable(wq); 1671 1672 } else { 1673 mutex_exit(&hidp->hid_mutex); 1674 } 1675 } 1676 1677 1678 /* 1679 * hid_parse_hid_descr: 1680 * Parse the hid descriptor, check after interface and after 1681 * endpoint descriptor 1682 */ 1683 static size_t 1684 hid_parse_hid_descr( 1685 usb_hid_descr_t *ret_descr, 1686 size_t ret_buf_len, 1687 usb_alt_if_data_t *altif_data, 1688 usb_ep_data_t *ep_data) 1689 { 1690 usb_cvs_data_t *cvs; 1691 int which_cvs; 1692 1693 for (which_cvs = 0; which_cvs < altif_data->altif_n_cvs; which_cvs++) { 1694 cvs = &altif_data->altif_cvs[which_cvs]; 1695 if (cvs->cvs_buf == NULL) { 1696 continue; 1697 } 1698 if (cvs->cvs_buf[1] == USB_DESCR_TYPE_HID) { 1699 return (usb_parse_data("ccscccs", 1700 cvs->cvs_buf, cvs->cvs_buf_len, 1701 (void *)ret_descr, 1702 (size_t)ret_buf_len)); 1703 } 1704 } 1705 1706 /* now try after endpoint */ 1707 for (which_cvs = 0; which_cvs < ep_data->ep_n_cvs; which_cvs++) { 1708 cvs = &ep_data->ep_cvs[which_cvs]; 1709 if (cvs->cvs_buf == NULL) { 1710 continue; 1711 } 1712 if (cvs->cvs_buf[1] == USB_DESCR_TYPE_HID) { 1713 return (usb_parse_data("ccscccs", 1714 cvs->cvs_buf, cvs->cvs_buf_len, 1715 (void *)ret_descr, 1716 (size_t)ret_buf_len)); 1717 } 1718 } 1719 1720 return (USB_PARSE_ERROR); 1721 } 1722 1723 1724 /* 1725 * hid_parse_hid_descr_failure: 1726 * If parsing of hid descriptor failed and the device is 1727 * a keyboard or mouse, use predefined length and packet size. 1728 */ 1729 static int 1730 hid_parse_hid_descr_failure(hid_state_t *hidp) 1731 { 1732 /* 1733 * Parsing hid descriptor failed, probably because the 1734 * device did not return a valid hid descriptor. Check to 1735 * see if this is a keyboard or mouse. If so, use the 1736 * predefined hid descriptor length and packet size. 1737 * Otherwise, detach and return failure. 1738 */ 1739 USB_DPRINTF_L1(PRINT_MASK_ATTA, hidp->hid_log_handle, 1740 "Parsing of hid descriptor failed"); 1741 1742 if (hidp->hid_if_descr.bInterfaceProtocol == KEYBOARD_PROTOCOL) { 1743 USB_DPRINTF_L2(PRINT_MASK_ATTA, hidp->hid_log_handle, 1744 "Set hid descriptor length to predefined " 1745 "USB_KB_HID_DESCR_LENGTH for keyboard."); 1746 1747 /* device is a keyboard */ 1748 hidp->hid_hid_descr.wReportDescriptorLength = 1749 USB_KB_HID_DESCR_LENGTH; 1750 1751 hidp->hid_packet_size = USBKPSZ; 1752 1753 } else if (hidp->hid_if_descr.bInterfaceProtocol == 1754 MOUSE_PROTOCOL) { 1755 USB_DPRINTF_L2(PRINT_MASK_ATTA, hidp->hid_log_handle, 1756 "Set hid descriptor length to predefined " 1757 "USB_MS_HID_DESCR_LENGTH for mouse."); 1758 1759 /* device is a mouse */ 1760 hidp->hid_hid_descr.wReportDescriptorLength = 1761 USB_MS_HID_DESCR_LENGTH; 1762 1763 hidp->hid_packet_size = USBMSSZ; 1764 } else { 1765 1766 return (USB_FAILURE); 1767 } 1768 1769 return (USB_SUCCESS); 1770 } 1771 1772 1773 /* 1774 * hid_handle_report_descriptor: 1775 * Get the report descriptor, call hidparser routine to parse 1776 * it and query the hidparser tree to get the packet size 1777 */ 1778 static int 1779 hid_handle_report_descriptor(hid_state_t *hidp, 1780 int interface) 1781 { 1782 usb_cr_t completion_reason; 1783 usb_cb_flags_t cb_flags; 1784 mblk_t *data = NULL; 1785 hidparser_packet_info_t hpack; 1786 int i; 1787 usb_ctrl_setup_t setup = { 1788 USB_DEV_REQ_DEV_TO_HOST | /* bmRequestType */ 1789 USB_DEV_REQ_RCPT_IF, 1790 USB_REQ_GET_DESCR, /* bRequest */ 1791 USB_CLASS_DESCR_TYPE_REPORT, /* wValue */ 1792 0, /* wIndex: interface, fill in later */ 1793 0, /* wLength, fill in later */ 1794 0 /* attributes */ 1795 }; 1796 1797 /* 1798 * Parsing hid desciptor was successful earlier. 1799 * Get Report Descriptor 1800 */ 1801 setup.wIndex = (uint16_t)interface; 1802 setup.wLength = hidp->hid_hid_descr.wReportDescriptorLength; 1803 if (usb_pipe_ctrl_xfer_wait(hidp->hid_default_pipe, 1804 &setup, 1805 &data, /* data */ 1806 &completion_reason, &cb_flags, 0) != USB_SUCCESS) { 1807 1808 USB_DPRINTF_L2(PRINT_MASK_ATTA, hidp->hid_log_handle, 1809 "Failed to receive the Report Descriptor"); 1810 freemsg(data); 1811 1812 return (USB_FAILURE); 1813 1814 } else { 1815 int n = hidp->hid_hid_descr.wReportDescriptorLength; 1816 1817 ASSERT(data); 1818 1819 /* Print the report descriptor */ 1820 for (i = 0; i < n; i++) { 1821 USB_DPRINTF_L3(PRINT_MASK_ATTA, hidp->hid_log_handle, 1822 "Index = %d\tvalue =0x%x", i, 1823 (int)(data->b_rptr[i])); 1824 } 1825 1826 /* Get Report Descriptor was successful */ 1827 if (hidparser_parse_report_descriptor( 1828 data->b_rptr, 1829 hidp->hid_hid_descr.wReportDescriptorLength, 1830 &hidp->hid_hid_descr, 1831 &hidp->hid_report_descr) == HIDPARSER_SUCCESS) { 1832 1833 /* find max intr-in xfer length */ 1834 hidparser_find_max_packet_size_from_report_descriptor( 1835 hidp->hid_report_descr, &hpack); 1836 /* round up to the nearest byte */ 1837 hidp->hid_packet_size = (hpack.max_packet_size + 7) / 8; 1838 1839 /* if report id is used, add more more byte for it */ 1840 if (hpack.report_id != HID_REPORT_ID_UNDEFINED) { 1841 hidp->hid_packet_size++; 1842 } 1843 } else { 1844 USB_DPRINTF_L1(PRINT_MASK_ATTA, hidp->hid_log_handle, 1845 "Invalid Report Descriptor"); 1846 freemsg(data); 1847 1848 return (USB_FAILURE); 1849 } 1850 1851 freemsg(data); 1852 1853 return (USB_SUCCESS); 1854 } 1855 } 1856 1857 1858 /* 1859 * hid_set_idle: 1860 * Make a clas specific request to SET_IDLE. 1861 * In this case send no reports if state has not changed. 1862 * See HID 7.2.4. 1863 */ 1864 /*ARGSUSED*/ 1865 static void 1866 hid_set_idle(hid_state_t *hidp) 1867 { 1868 usb_cr_t completion_reason; 1869 usb_cb_flags_t cb_flags; 1870 usb_ctrl_setup_t setup = { 1871 USB_DEV_REQ_HOST_TO_DEV | /* bmRequestType */ 1872 USB_DEV_REQ_TYPE_CLASS | 1873 USB_DEV_REQ_RCPT_IF, 1874 SET_IDLE, /* bRequest */ 1875 DURATION, /* wValue */ 1876 0, /* wIndex: interface, fill in later */ 1877 0, /* wLength */ 1878 0 /* attributes */ 1879 }; 1880 1881 USB_DPRINTF_L4(PRINT_MASK_ATTA, hidp->hid_log_handle, 1882 "hid_set_idle: Begin"); 1883 1884 setup.wIndex = hidp->hid_if_descr.bInterfaceNumber; 1885 if (usb_pipe_ctrl_xfer_wait( 1886 hidp->hid_default_pipe, 1887 &setup, 1888 NULL, /* no data to send. */ 1889 &completion_reason, &cb_flags, 0) != USB_SUCCESS) { 1890 1891 USB_DPRINTF_L2(PRINT_MASK_ATTA, hidp->hid_log_handle, 1892 "Failed while trying to set idle," 1893 "cr = %d, cb_flags = 0x%x\n", 1894 completion_reason, cb_flags); 1895 } 1896 USB_DPRINTF_L4(PRINT_MASK_ATTA, hidp->hid_log_handle, 1897 "hid_set_idle: End"); 1898 } 1899 1900 1901 /* 1902 * hid_set_protocol: 1903 * Initialize the device to set the preferred protocol 1904 */ 1905 /*ARGSUSED*/ 1906 static void 1907 hid_set_protocol(hid_state_t *hidp, int protocol) 1908 { 1909 usb_cr_t completion_reason; 1910 usb_cb_flags_t cb_flags; 1911 usb_ctrl_setup_t setup; 1912 1913 USB_DPRINTF_L4(PRINT_MASK_ATTA, hidp->hid_log_handle, 1914 "hid_set_protocol(%d): Begin", protocol); 1915 1916 /* initialize the setup request */ 1917 setup.bmRequestType = USB_DEV_REQ_HOST_TO_DEV | 1918 USB_DEV_REQ_TYPE_CLASS | USB_DEV_REQ_RCPT_IF; 1919 setup.bRequest = SET_PROTOCOL; 1920 setup.wValue = protocol; 1921 setup.wIndex = hidp->hid_if_descr.bInterfaceNumber; 1922 setup.wLength = 0; 1923 setup.attrs = 0; 1924 if (usb_pipe_ctrl_xfer_wait( 1925 hidp->hid_default_pipe, /* bmRequestType */ 1926 &setup, 1927 NULL, /* no data to send */ 1928 &completion_reason, &cb_flags, 0) != USB_SUCCESS) { 1929 /* 1930 * Some devices fail to follow the specification 1931 * and instead of STALLing, they continously 1932 * NAK the SET_IDLE command. We need to reset 1933 * the pipe then, so that ohci doesn't panic. 1934 */ 1935 USB_DPRINTF_L2(PRINT_MASK_ATTA, hidp->hid_log_handle, 1936 "Failed while trying to set protocol:%d," 1937 "cr = %d cb_flags = 0x%x\n", 1938 completion_reason, cb_flags, protocol); 1939 } 1940 1941 USB_DPRINTF_L4(PRINT_MASK_ATTA, hidp->hid_log_handle, 1942 "hid_set_protocol: End"); 1943 } 1944 1945 1946 /* 1947 * hid_detach_cleanup: 1948 * called by attach and detach for cleanup. 1949 */ 1950 static void 1951 hid_detach_cleanup(dev_info_t *dip, hid_state_t *hidp) 1952 { 1953 int flags = hidp->hid_attach_flags; 1954 int rval; 1955 hid_power_t *hidpm; 1956 1957 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 1958 "hid_detach_cleanup: Begin"); 1959 1960 if ((hidp->hid_attach_flags & HID_LOCK_INIT) == 0) { 1961 1962 goto done; 1963 } 1964 1965 /* 1966 * Disable the event callbacks first, after this point, event 1967 * callbacks will never get called. Note we shouldn't hold 1968 * mutex while unregistering events because there may be a 1969 * competing event callback thread. Event callbacks are done 1970 * with ndi mutex held and this can cause a potential deadlock. 1971 */ 1972 usb_unregister_event_cbs(dip, &hid_events); 1973 1974 mutex_enter(&hidp->hid_mutex); 1975 1976 hidpm = hidp->hid_pm; 1977 1978 USB_DPRINTF_L2(PRINT_MASK_ALL, hidp->hid_log_handle, 1979 "hid_detach_cleanup: hidpm=0x%p", hidpm); 1980 1981 if (hidpm && (hidp->hid_dev_state != USB_DEV_DISCONNECTED)) { 1982 1983 mutex_exit(&hidp->hid_mutex); 1984 hid_pm_busy_component(hidp); 1985 if (hid_is_pm_enabled(dip) == USB_SUCCESS) { 1986 1987 if (hidpm->hid_wakeup_enabled) { 1988 1989 /* First bring the device to full power */ 1990 (void) pm_raise_power(dip, 0, 1991 USB_DEV_OS_FULL_PWR); 1992 1993 /* Disable remote wakeup */ 1994 rval = usb_handle_remote_wakeup(dip, 1995 USB_REMOTE_WAKEUP_DISABLE); 1996 1997 if (rval != DDI_SUCCESS) { 1998 USB_DPRINTF_L2(PRINT_MASK_ALL, 1999 hidp->hid_log_handle, 2000 "hid_detach_cleanup: " 2001 "disble remote wakeup failed, " 2002 "rval= %d", rval); 2003 } 2004 } 2005 2006 (void) pm_lower_power(dip, 0, USB_DEV_OS_PWR_OFF); 2007 } 2008 hid_pm_idle_component(hidp); 2009 mutex_enter(&hidp->hid_mutex); 2010 } 2011 2012 if (hidpm) { 2013 freemsg(hidpm->hid_pm_pwrup); 2014 kmem_free(hidpm, sizeof (hid_power_t)); 2015 hidp->hid_pm = NULL; 2016 } 2017 2018 mutex_exit(&hidp->hid_mutex); 2019 2020 if (hidp->hid_report_descr != NULL) { 2021 (void) hidparser_free_report_descriptor_handle( 2022 hidp->hid_report_descr); 2023 } 2024 2025 if (flags & HID_MINOR_NODES) { 2026 ddi_remove_minor_node(dip, NULL); 2027 } 2028 2029 mutex_destroy(&hidp->hid_mutex); 2030 2031 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 2032 "hid_detach_cleanup: End"); 2033 2034 done: 2035 usb_client_detach(dip, hidp->hid_dev_data); 2036 usb_free_log_hdl(hidp->hid_log_handle); 2037 ddi_soft_state_free(hid_statep, hidp->hid_instance); 2038 2039 ddi_prop_remove_all(dip); 2040 } 2041 2042 2043 /* 2044 * hid_start_intr_polling: 2045 * Allocate an interrupt request structure, initialize, 2046 * and start interrupt transfers. 2047 */ 2048 static int 2049 hid_start_intr_polling(hid_state_t *hidp) 2050 { 2051 usb_intr_req_t *req; 2052 int rval = USB_SUCCESS; 2053 2054 USB_DPRINTF_L4(PRINT_MASK_PM, hidp->hid_log_handle, 2055 "hid_start_intr_polling: " 2056 "dev_state=%s str_flags=%d ph=0x%p", 2057 usb_str_dev_state(hidp->hid_dev_state), hidp->hid_streams_flags, 2058 hidp->hid_interrupt_pipe); 2059 2060 if ((hidp->hid_streams_flags == HID_STREAMS_OPEN) && 2061 (hidp->hid_interrupt_pipe != NULL)) { 2062 /* 2063 * initialize interrupt pipe request structure 2064 */ 2065 req = usb_alloc_intr_req(hidp->hid_dip, 0, USB_FLAGS_SLEEP); 2066 req->intr_client_private = (usb_opaque_t)hidp; 2067 req->intr_attributes = USB_ATTRS_SHORT_XFER_OK | 2068 USB_ATTRS_AUTOCLEARING; 2069 req->intr_len = hidp->hid_packet_size; 2070 req->intr_cb = hid_interrupt_pipe_callback; 2071 req->intr_exc_cb = hid_interrupt_pipe_exception_callback; 2072 2073 /* 2074 * Start polling on the interrupt pipe. 2075 */ 2076 mutex_exit(&hidp->hid_mutex); 2077 2078 if ((rval = usb_pipe_intr_xfer(hidp->hid_interrupt_pipe, req, 2079 USB_FLAGS_SLEEP)) != USB_SUCCESS) { 2080 USB_DPRINTF_L2(PRINT_MASK_PM, hidp->hid_log_handle, 2081 "hid_start_intr_polling failed: rval = %d", 2082 rval); 2083 usb_free_intr_req(req); 2084 } 2085 2086 mutex_enter(&hidp->hid_mutex); 2087 } 2088 2089 USB_DPRINTF_L4(PRINT_MASK_PM, hidp->hid_log_handle, 2090 "hid_start_intr_polling: done, rval = %d", rval); 2091 2092 return (rval); 2093 } 2094 2095 2096 /* 2097 * hid_close_intr_pipe: 2098 * close the interrupt pipe after draining all callbacks 2099 */ 2100 static void 2101 hid_close_intr_pipe(hid_state_t *hidp) 2102 { 2103 USB_DPRINTF_L4(PRINT_MASK_CLOSE, hidp->hid_log_handle, 2104 "hid_close_intr_pipe: Begin"); 2105 2106 if (hidp->hid_interrupt_pipe) { 2107 /* 2108 * Close the interrupt pipe 2109 */ 2110 mutex_exit(&hidp->hid_mutex); 2111 usb_pipe_close(hidp->hid_dip, hidp->hid_interrupt_pipe, 2112 USB_FLAGS_SLEEP, NULL, NULL); 2113 mutex_enter(&hidp->hid_mutex); 2114 hidp->hid_interrupt_pipe = NULL; 2115 } 2116 USB_DPRINTF_L4(PRINT_MASK_CLOSE, hidp->hid_log_handle, 2117 "hid_close_intr_pipe: End"); 2118 } 2119 2120 2121 /* 2122 * hid_mctl_receive: 2123 * Handle M_CTL messages from upper stream. If 2124 * we don't understand the command, free message. 2125 */ 2126 static int 2127 hid_mctl_receive(register queue_t *q, register mblk_t *mp) 2128 { 2129 hid_state_t *hidp = (hid_state_t *)q->q_ptr; 2130 struct iocblk *iocp; 2131 int error = HID_FAILURE; 2132 uchar_t request_type; 2133 hid_req_t *hid_req_data = NULL; 2134 hid_polled_input_callback_t hid_polled_input; 2135 hid_vid_pid_t hid_vid_pid; 2136 2137 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 2138 "hid_mctl_receive"); 2139 2140 iocp = (struct iocblk *)mp->b_rptr; 2141 2142 switch (iocp->ioc_cmd) { 2143 case HID_SET_REPORT: 2144 /* FALLTHRU */ 2145 case HID_SET_IDLE: 2146 /* FALLTHRU */ 2147 case HID_SET_PROTOCOL: 2148 request_type = USB_DEV_REQ_HOST_TO_DEV | 2149 USB_DEV_REQ_RCPT_IF | USB_DEV_REQ_TYPE_CLASS; 2150 2151 break; 2152 case HID_GET_REPORT: 2153 /* FALLTHRU */ 2154 case HID_GET_IDLE: 2155 /* FALLTHRU */ 2156 case HID_GET_PROTOCOL: 2157 request_type = USB_DEV_REQ_DEV_TO_HOST | 2158 USB_DEV_REQ_RCPT_IF | USB_DEV_REQ_TYPE_CLASS; 2159 2160 break; 2161 case HID_GET_PARSER_HANDLE: 2162 if (canputnext(RD(q))) { 2163 freemsg(mp->b_cont); 2164 mp->b_cont = hid_data2mblk( 2165 (uchar_t *)&hidp->hid_report_descr, 2166 sizeof (hidp->hid_report_descr)); 2167 if (mp->b_cont == NULL) { 2168 /* 2169 * can't allocate mblk, indicate 2170 * that nothing is returned 2171 */ 2172 iocp->ioc_count = 0; 2173 } else { 2174 iocp->ioc_count = 2175 sizeof (hidp->hid_report_descr); 2176 } 2177 qreply(q, mp); 2178 2179 return (HID_SUCCESS); 2180 } else { 2181 2182 /* retry */ 2183 return (HID_ENQUEUE); 2184 } 2185 case HID_GET_VID_PID: 2186 if (canputnext(RD(q))) { 2187 freemsg(mp->b_cont); 2188 2189 hid_vid_pid.VendorId = 2190 hidp->hid_dev_descr->idVendor; 2191 hid_vid_pid.ProductId = 2192 hidp->hid_dev_descr->idProduct; 2193 2194 mp->b_cont = hid_data2mblk( 2195 (uchar_t *)&hid_vid_pid, sizeof (hid_vid_pid_t)); 2196 if (mp->b_cont == NULL) { 2197 /* 2198 * can't allocate mblk, indicate that nothing 2199 * is being returned. 2200 */ 2201 iocp->ioc_count = 0; 2202 } else { 2203 iocp->ioc_count = 2204 sizeof (hid_vid_pid_t); 2205 } 2206 qreply(q, mp); 2207 2208 return (HID_SUCCESS); 2209 } else { 2210 2211 /* retry */ 2212 return (HID_ENQUEUE); 2213 } 2214 case HID_OPEN_POLLED_INPUT: 2215 if (canputnext(RD(q))) { 2216 freemsg(mp->b_cont); 2217 2218 /* Initialize the structure */ 2219 hid_polled_input.hid_polled_version = 2220 HID_POLLED_INPUT_V0; 2221 hid_polled_input.hid_polled_read = hid_polled_read; 2222 hid_polled_input.hid_polled_input_enter = 2223 hid_polled_input_enter; 2224 hid_polled_input.hid_polled_input_exit = 2225 hid_polled_input_exit; 2226 hid_polled_input.hid_polled_input_handle = 2227 (hid_polled_handle_t)hidp; 2228 2229 mp->b_cont = hid_data2mblk( 2230 (uchar_t *)&hid_polled_input, 2231 sizeof (hid_polled_input_callback_t)); 2232 if (mp->b_cont == NULL) { 2233 /* 2234 * can't allocate mblk, indicate that nothing 2235 * is being returned. 2236 */ 2237 iocp->ioc_count = 0; 2238 } else { 2239 /* Call down into USBA */ 2240 (void) hid_polled_input_init(hidp); 2241 2242 iocp->ioc_count = 2243 sizeof (hid_polled_input_callback_t); 2244 } 2245 qreply(q, mp); 2246 2247 return (HID_SUCCESS); 2248 } else { 2249 2250 /* retry */ 2251 return (HID_ENQUEUE); 2252 } 2253 case HID_CLOSE_POLLED_INPUT: 2254 /* Call down into USBA */ 2255 (void) hid_polled_input_fini(hidp); 2256 2257 iocp->ioc_count = 0; 2258 qreply(q, mp); 2259 2260 return (HID_SUCCESS); 2261 default: 2262 hid_qreply_merror(q, mp, EINVAL); 2263 2264 return (HID_FAILURE); 2265 } 2266 2267 /* 2268 * These (device executable) commands require a hid_req_t. 2269 * Make sure one is present 2270 */ 2271 if (mp->b_cont == NULL) { 2272 hid_qreply_merror(q, mp, EINVAL); 2273 2274 return (error); 2275 } else { 2276 hid_req_data = (hid_req_t *)mp->b_cont->b_rptr; 2277 if ((iocp->ioc_cmd == HID_SET_REPORT) && 2278 (hid_req_data->hid_req_wLength == 0)) { 2279 hid_qreply_merror(q, mp, EINVAL); 2280 2281 return (error); 2282 } 2283 } 2284 2285 /* 2286 * Check is version no. is correct. This 2287 * is coming from the user 2288 */ 2289 if (hid_req_data->hid_req_version_no != HID_VERSION_V_0) { 2290 hid_qreply_merror(q, mp, EINVAL); 2291 2292 return (error); 2293 } 2294 2295 mutex_enter(&hidp->hid_mutex); 2296 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 2297 "hid_mctl_receive: dev_state=%s", 2298 usb_str_dev_state(hidp->hid_dev_state)); 2299 2300 switch (hidp->hid_dev_state) { 2301 case USB_DEV_PWRED_DOWN: 2302 /* 2303 * get the device full powered. We get a callback 2304 * which enables the WQ and kicks off IO 2305 */ 2306 hidp->hid_dev_state = USB_DEV_HID_POWER_CHANGE; 2307 mutex_exit(&hidp->hid_mutex); 2308 if (usb_req_raise_power(hidp->hid_dip, 0, 2309 USB_DEV_OS_FULL_PWR, hid_power_change_callback, 2310 hidp, 0) != USB_SUCCESS) { 2311 /* we retry raising power in wsrv */ 2312 mutex_enter(&hidp->hid_mutex); 2313 hidp->hid_dev_state = USB_DEV_PWRED_DOWN; 2314 mutex_exit(&hidp->hid_mutex); 2315 } 2316 error = HID_ENQUEUE; 2317 2318 break; 2319 case USB_DEV_HID_POWER_CHANGE: 2320 mutex_exit(&hidp->hid_mutex); 2321 error = HID_ENQUEUE; 2322 2323 break; 2324 case USB_DEV_ONLINE: 2325 if (hidp->hid_streams_flags != HID_STREAMS_DISMANTLING) { 2326 /* Send a message down */ 2327 mutex_exit(&hidp->hid_mutex); 2328 error = hid_mctl_execute_cmd(hidp, request_type, 2329 hid_req_data, mp); 2330 if (error == HID_FAILURE) { 2331 hid_qreply_merror(q, mp, EIO); 2332 } 2333 } else { 2334 mutex_exit(&hidp->hid_mutex); 2335 hid_qreply_merror(q, mp, EIO); 2336 } 2337 2338 break; 2339 default: 2340 mutex_exit(&hidp->hid_mutex); 2341 hid_qreply_merror(q, mp, EIO); 2342 2343 break; 2344 } 2345 2346 return (error); 2347 } 2348 2349 2350 /* 2351 * hid_mctl_execute_cmd: 2352 * Send the command to the device. 2353 */ 2354 static int 2355 hid_mctl_execute_cmd(hid_state_t *hidp, int request_type, 2356 hid_req_t *hid_req_data, mblk_t *mp) 2357 { 2358 int request_index; 2359 struct iocblk *iocp; 2360 hid_default_pipe_arg_t *def_pipe_arg; 2361 2362 iocp = (struct iocblk *)mp->b_rptr; 2363 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 2364 "hid_mctl_execute_cmd: iocp=0x%p", iocp); 2365 2366 request_index = hidp->hid_if_descr.bInterfaceNumber; 2367 2368 /* 2369 * Set up the argument to be passed back to hid 2370 * when the asynchronous control callback is 2371 * executed. 2372 */ 2373 def_pipe_arg = kmem_zalloc(sizeof (hid_default_pipe_arg_t), 0); 2374 2375 if (def_pipe_arg == NULL) { 2376 2377 return (HID_FAILURE); 2378 } 2379 2380 def_pipe_arg->hid_default_pipe_arg_mctlmsg.ioc_cmd = iocp->ioc_cmd; 2381 def_pipe_arg->hid_default_pipe_arg_mctlmsg.ioc_count = 0; 2382 def_pipe_arg->hid_default_pipe_arg_hidp = hidp; 2383 def_pipe_arg->hid_default_pipe_arg_mblk = mp; 2384 2385 /* 2386 * Send the command down to USBA through default 2387 * pipe. 2388 */ 2389 if (hid_send_async_ctrl_request(hidp, hid_req_data, 2390 request_type, iocp->ioc_cmd, 2391 request_index, def_pipe_arg) != USB_SUCCESS) { 2392 2393 kmem_free(def_pipe_arg, sizeof (hid_default_pipe_arg_t)); 2394 2395 return (HID_FAILURE); 2396 } 2397 2398 return (HID_INPROGRESS); 2399 } 2400 2401 2402 /* 2403 * hid_send_async_ctrl_request: 2404 * Send an asynchronous control request to USBA. Since hid is a STREAMS 2405 * driver, it is not allowed to wait in its entry points except for the 2406 * open and close entry points. Therefore, hid must use the asynchronous 2407 * USBA calls. 2408 */ 2409 static int 2410 hid_send_async_ctrl_request(hid_state_t *hidp, hid_req_t *hid_request, 2411 uchar_t request_type, int request_request, 2412 ushort_t request_index, 2413 hid_default_pipe_arg_t *hid_default_pipe_arg) 2414 { 2415 usb_ctrl_req_t *ctrl_req; 2416 int rval; 2417 size_t length = 0; 2418 2419 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 2420 "hid_send_async_ctrl_request: " 2421 "rq_type=%d rq_rq=%d index=%d", 2422 request_type, request_request, request_index); 2423 2424 mutex_enter(&hidp->hid_mutex); 2425 hidp->hid_default_pipe_req++; 2426 mutex_exit(&hidp->hid_mutex); 2427 2428 /* 2429 * Note that ctrl_req->ctrl_data should be allocated by usba 2430 * only for IN requests. OUT request(e.g SET_REPORT) can have a 2431 * non-zero wLength value but ctrl_data would be allocated by 2432 * client for them. 2433 */ 2434 if (hid_request->hid_req_wLength >= MAX_REPORT_DATA) { 2435 USB_DPRINTF_L2(PRINT_MASK_ALL, hidp->hid_log_handle, 2436 "hid_req_wLength is exceeded"); 2437 return (USB_FAILURE); 2438 } 2439 if ((request_type & USB_DEV_REQ_DIR_MASK) == USB_DEV_REQ_DEV_TO_HOST) { 2440 length = hid_request->hid_req_wLength; 2441 } 2442 2443 if ((ctrl_req = usb_alloc_ctrl_req(hidp->hid_dip, length, 0)) == NULL) { 2444 USB_DPRINTF_L2(PRINT_MASK_ALL, hidp->hid_log_handle, 2445 "unable to alloc ctrl req. async trans failed"); 2446 mutex_enter(&hidp->hid_mutex); 2447 hidp->hid_default_pipe_req--; 2448 ASSERT(hidp->hid_default_pipe_req >= 0); 2449 mutex_exit(&hidp->hid_mutex); 2450 2451 return (USB_FAILURE); 2452 } 2453 2454 if ((request_type & USB_DEV_REQ_DIR_MASK) == USB_DEV_REQ_HOST_TO_DEV) { 2455 ASSERT((length == 0) && (ctrl_req->ctrl_data == NULL)); 2456 } 2457 2458 ctrl_req->ctrl_bmRequestType = request_type; 2459 ctrl_req->ctrl_bRequest = (uint8_t)request_request; 2460 ctrl_req->ctrl_wValue = hid_request->hid_req_wValue; 2461 ctrl_req->ctrl_wIndex = request_index; 2462 ctrl_req->ctrl_wLength = hid_request->hid_req_wLength; 2463 /* host to device: create a msg from hid_req_data */ 2464 if ((request_type & USB_DEV_REQ_DIR_MASK) == USB_DEV_REQ_HOST_TO_DEV) { 2465 mblk_t *pblk = allocb(hid_request->hid_req_wLength, BPRI_HI); 2466 if (pblk == NULL) { 2467 usb_free_ctrl_req(ctrl_req); 2468 return (USB_FAILURE); 2469 } 2470 bcopy(hid_request->hid_req_data, pblk->b_wptr, 2471 hid_request->hid_req_wLength); 2472 pblk->b_wptr += hid_request->hid_req_wLength; 2473 ctrl_req->ctrl_data = pblk; 2474 } 2475 ctrl_req->ctrl_attributes = USB_ATTRS_AUTOCLEARING; 2476 ctrl_req->ctrl_client_private = (usb_opaque_t)hid_default_pipe_arg; 2477 ctrl_req->ctrl_cb = hid_default_pipe_callback; 2478 ctrl_req->ctrl_exc_cb = hid_default_pipe_exception_callback; 2479 2480 if ((rval = usb_pipe_ctrl_xfer(hidp->hid_default_pipe, 2481 ctrl_req, 0)) != USB_SUCCESS) { 2482 mutex_enter(&hidp->hid_mutex); 2483 hidp->hid_default_pipe_req--; 2484 ASSERT(hidp->hid_default_pipe_req >= 0); 2485 mutex_exit(&hidp->hid_mutex); 2486 2487 usb_free_ctrl_req(ctrl_req); 2488 USB_DPRINTF_L2(PRINT_MASK_ALL, hidp->hid_log_handle, 2489 "usb_pipe_ctrl_xfer() failed. rval = %d", rval); 2490 2491 return (USB_FAILURE); 2492 } 2493 2494 return (USB_SUCCESS); 2495 } 2496 2497 2498 /* 2499 * hid_ioctl: 2500 * Hid currently doesn't handle any ioctls. NACK 2501 * the ioctl request. 2502 */ 2503 static void 2504 hid_ioctl(register queue_t *q, register mblk_t *mp) 2505 { 2506 register struct iocblk *iocp; 2507 2508 iocp = (struct iocblk *)mp->b_rptr; 2509 2510 iocp->ioc_rval = 0; 2511 2512 iocp->ioc_error = ENOTTY; 2513 2514 mp->b_datap->db_type = M_IOCNAK; 2515 2516 qreply(q, mp); 2517 } 2518 2519 2520 /* 2521 * hid_create_pm_components: 2522 * Create the pm components required for power management. 2523 * For keyboard/mouse, the components is created only if the device 2524 * supports a remote wakeup. 2525 * For other hid devices they are created unconditionally. 2526 */ 2527 static void 2528 hid_create_pm_components(dev_info_t *dip, hid_state_t *hidp) 2529 { 2530 hid_power_t *hidpm; 2531 uint_t pwr_states; 2532 2533 USB_DPRINTF_L4(PRINT_MASK_PM, hidp->hid_log_handle, 2534 "hid_create_pm_components: Begin"); 2535 2536 /* Allocate the state structure */ 2537 hidpm = kmem_zalloc(sizeof (hid_power_t), KM_SLEEP); 2538 hidp->hid_pm = hidpm; 2539 hidpm->hid_state = hidp; 2540 hidpm->hid_raise_power = B_FALSE; 2541 hidpm->hid_pm_capabilities = 0; 2542 hidpm->hid_current_power = USB_DEV_OS_FULL_PWR; 2543 2544 switch (hidp->hid_if_descr.bInterfaceProtocol) { 2545 case KEYBOARD_PROTOCOL: 2546 case MOUSE_PROTOCOL: 2547 hidpm->hid_pm_strategy = HID_PM_ACTIVITY; 2548 if ((hid_is_pm_enabled(dip) == USB_SUCCESS) && 2549 (usb_handle_remote_wakeup(dip, USB_REMOTE_WAKEUP_ENABLE) == 2550 USB_SUCCESS)) { 2551 2552 USB_DPRINTF_L3(PRINT_MASK_PM, hidp->hid_log_handle, 2553 "hid_create_pm_components: Remote Wakeup Enabled"); 2554 2555 if (usb_create_pm_components(dip, &pwr_states) == 2556 USB_SUCCESS) { 2557 hidpm->hid_wakeup_enabled = 1; 2558 hidpm->hid_pwr_states = (uint8_t)pwr_states; 2559 } 2560 } 2561 2562 break; 2563 default: 2564 hidpm->hid_pm_strategy = HID_PM_OPEN_CLOSE; 2565 if ((hid_is_pm_enabled(dip) == USB_SUCCESS) && 2566 (usb_create_pm_components(dip, &pwr_states) == 2567 USB_SUCCESS)) { 2568 hidpm->hid_wakeup_enabled = 0; 2569 hidpm->hid_pwr_states = (uint8_t)pwr_states; 2570 } 2571 2572 break; 2573 } 2574 2575 USB_DPRINTF_L4(PRINT_MASK_PM, hidp->hid_log_handle, 2576 "hid_create_pm_components: END"); 2577 } 2578 2579 2580 /* 2581 * hid_is_pm_enabled 2582 * Check if the device is pm enabled. Always enable 2583 * pm on the new SUN mouse 2584 */ 2585 static int 2586 hid_is_pm_enabled(dev_info_t *dip) 2587 { 2588 hid_state_t *hidp = ddi_get_soft_state(hid_statep, 2589 ddi_get_instance(dip)); 2590 2591 if (strcmp(ddi_node_name(dip), "mouse") == 0) { 2592 /* check for overrides first */ 2593 if (hid_pm_mouse || 2594 (ddi_prop_exists(DDI_DEV_T_ANY, dip, 2595 (DDI_PROP_DONTPASS | DDI_PROP_NOTPROM), 2596 "hid-mouse-pm-enable") == 1)) { 2597 2598 return (USB_SUCCESS); 2599 } 2600 2601 /* 2602 * Always enable PM for 1.05 or greater SUN mouse 2603 * hidp->hid_dev_descr won't be NULL. 2604 */ 2605 if ((hidp->hid_dev_descr->idVendor == 2606 HID_SUN_MOUSE_VENDOR_ID) && 2607 (hidp->hid_dev_descr->idProduct == 2608 HID_SUN_MOUSE_PROD_ID) && 2609 (hidp->hid_dev_descr->bcdDevice >= 2610 HID_SUN_MOUSE_BCDDEVICE)) { 2611 2612 return (USB_SUCCESS); 2613 } 2614 } else { 2615 2616 return (USB_SUCCESS); 2617 } 2618 2619 return (USB_FAILURE); 2620 } 2621 2622 2623 /* 2624 * hid_save_device_state 2625 * Save the current device/driver state. 2626 */ 2627 static void 2628 hid_save_device_state(hid_state_t *hidp) 2629 { 2630 struct iocblk *mctlmsg; 2631 mblk_t *mp; 2632 queue_t *q; 2633 2634 USB_DPRINTF_L4(PRINT_MASK_EVENTS, hidp->hid_log_handle, 2635 "hid_save_device_state"); 2636 2637 if (hidp->hid_streams_flags == HID_STREAMS_OPEN) { 2638 /* 2639 * Send an MCTL up indicating that 2640 * the device will loose its state 2641 */ 2642 q = hidp->hid_rq_ptr; 2643 mutex_exit(&hidp->hid_mutex); 2644 if (canputnext(q)) { 2645 mp = allocb(sizeof (struct iocblk), BPRI_HI); 2646 if (mp != NULL) { 2647 mp->b_datap->db_type = M_CTL; 2648 mctlmsg = (struct iocblk *)mp->b_datap->db_base; 2649 mctlmsg->ioc_cmd = HID_DISCONNECT_EVENT; 2650 mctlmsg->ioc_count = 0; 2651 putnext(q, mp); 2652 } 2653 } 2654 /* stop polling on the intr pipe */ 2655 usb_pipe_stop_intr_polling(hidp->hid_interrupt_pipe, 2656 USB_FLAGS_SLEEP); 2657 2658 mutex_enter(&hidp->hid_mutex); 2659 } 2660 } 2661 2662 2663 /* 2664 * hid_restore_device_state: 2665 * Set original configuration of the device. 2666 * Reopen intr pipe. 2667 * Enable wrq - this starts new transactions on the control pipe. 2668 */ 2669 static void 2670 hid_restore_device_state(dev_info_t *dip, hid_state_t *hidp) 2671 { 2672 int rval; 2673 queue_t *rdq, *wrq; 2674 hid_power_t *hidpm; 2675 struct iocblk *mctlmsg; 2676 mblk_t *mp; 2677 2678 hid_pm_busy_component(hidp); 2679 mutex_enter(&hidp->hid_mutex); 2680 2681 USB_DPRINTF_L4(PRINT_MASK_ATTA, hidp->hid_log_handle, 2682 "hid_restore_device_state: %s", 2683 usb_str_dev_state(hidp->hid_dev_state)); 2684 2685 hidpm = hidp->hid_pm; 2686 mutex_exit(&hidp->hid_mutex); 2687 2688 /* First bring the device to full power */ 2689 (void) pm_raise_power(dip, 0, USB_DEV_OS_FULL_PWR); 2690 2691 mutex_enter(&hidp->hid_mutex); 2692 if (hidp->hid_dev_state == USB_DEV_ONLINE) { 2693 /* 2694 * We failed the checkpoint, there is no need to restore 2695 * the device state 2696 */ 2697 mutex_exit(&hidp->hid_mutex); 2698 hid_pm_idle_component(hidp); 2699 2700 return; 2701 } 2702 mutex_exit(&hidp->hid_mutex); 2703 2704 2705 /* Check if we are talking to the same device */ 2706 if (usb_check_same_device(dip, hidp->hid_log_handle, USB_LOG_L2, 2707 PRINT_MASK_ALL, USB_CHK_BASIC|USB_CHK_CFG, NULL) != USB_SUCCESS) { 2708 2709 /* change the device state from suspended to disconnected */ 2710 mutex_enter(&hidp->hid_mutex); 2711 hidp->hid_dev_state = USB_DEV_DISCONNECTED; 2712 mutex_exit(&hidp->hid_mutex); 2713 hid_pm_idle_component(hidp); 2714 2715 return; 2716 } 2717 2718 hid_set_idle(hidp); 2719 hid_set_protocol(hidp, SET_REPORT_PROTOCOL); 2720 2721 mutex_enter(&hidp->hid_mutex); 2722 /* if the device had remote wakeup earlier, enable it again */ 2723 if (hidpm->hid_wakeup_enabled) { 2724 mutex_exit(&hidp->hid_mutex); 2725 2726 if ((rval = usb_handle_remote_wakeup(hidp->hid_dip, 2727 USB_REMOTE_WAKEUP_ENABLE)) != USB_SUCCESS) { 2728 USB_DPRINTF_L2(PRINT_MASK_ATTA, 2729 hidp->hid_log_handle, 2730 "usb_handle_remote_wakeup failed (%d)", rval); 2731 } 2732 2733 mutex_enter(&hidp->hid_mutex); 2734 } 2735 2736 /* 2737 * restart polling on the interrupt pipe only if the device 2738 * was previously operational (open) 2739 */ 2740 if (hidp->hid_streams_flags == HID_STREAMS_OPEN) { 2741 rdq = hidp->hid_rq_ptr; 2742 wrq = hidp->hid_wq_ptr; 2743 if ((rval = hid_start_intr_polling(hidp)) != USB_SUCCESS) { 2744 USB_DPRINTF_L3(PRINT_MASK_ATTA, hidp->hid_log_handle, 2745 "hid_restore_device_state:" 2746 "unable to restart intr pipe poll" 2747 " rval = %d ", rval); 2748 /* 2749 * change the device state from 2750 * suspended to disconnected 2751 */ 2752 hidp->hid_dev_state = USB_DEV_DISCONNECTED; 2753 mutex_exit(&hidp->hid_mutex); 2754 hid_pm_idle_component(hidp); 2755 2756 return; 2757 } 2758 2759 if (hidp->hid_dev_state == USB_DEV_DISCONNECTED) { 2760 USB_DPRINTF_L2(PRINT_MASK_EVENTS, hidp->hid_log_handle, 2761 "device is being re-connected"); 2762 } 2763 2764 /* set the device state ONLINE */ 2765 hidp->hid_dev_state = USB_DEV_ONLINE; 2766 mutex_exit(&hidp->hid_mutex); 2767 2768 /* inform upstream modules that the device is back */ 2769 if (canputnext(rdq)) { 2770 mp = allocb(sizeof (struct iocblk), BPRI_HI); 2771 if (mp != NULL) { 2772 mp->b_datap->db_type = M_CTL; 2773 mctlmsg = (struct iocblk *)mp->b_datap->db_base; 2774 mctlmsg->ioc_cmd = HID_CONNECT_EVENT; 2775 mctlmsg->ioc_count = 0; 2776 putnext(rdq, mp); 2777 } 2778 } 2779 /* enable write side q */ 2780 qenable(wrq); 2781 mutex_enter(&hidp->hid_mutex); 2782 } else { 2783 /* set the device state ONLINE */ 2784 hidp->hid_dev_state = USB_DEV_ONLINE; 2785 } 2786 2787 mutex_exit(&hidp->hid_mutex); 2788 hid_pm_idle_component(hidp); 2789 } 2790 2791 2792 /* 2793 * hid_qreply_merror: 2794 * Pass an error message up. 2795 */ 2796 static void 2797 hid_qreply_merror(queue_t *q, mblk_t *mp, uchar_t errval) 2798 { 2799 mp->b_datap->db_type = M_ERROR; 2800 if (mp->b_cont) { 2801 freemsg(mp->b_cont); 2802 mp->b_cont = NULL; 2803 } 2804 mp->b_rptr = mp->b_datap->db_base; 2805 mp->b_wptr = mp->b_rptr + sizeof (char); 2806 *mp->b_rptr = errval; 2807 2808 qreply(q, mp); 2809 } 2810 2811 2812 /* 2813 * hid_data2mblk: 2814 * Form an mblk from the given data 2815 */ 2816 static mblk_t * 2817 hid_data2mblk(uchar_t *buf, int len) 2818 { 2819 mblk_t *mp = NULL; 2820 2821 if (len >= 0) { 2822 mp = allocb(len, BPRI_HI); 2823 if (mp) { 2824 bcopy(buf, mp->b_datap->db_base, len); 2825 mp->b_wptr += len; 2826 } 2827 } 2828 2829 return (mp); 2830 } 2831 2832 2833 /* 2834 * hid_flush : 2835 * Flush data already sent upstreams to client module. 2836 */ 2837 static void 2838 hid_flush(queue_t *q) 2839 { 2840 /* 2841 * Flush pending data already sent upstream 2842 */ 2843 if ((q != NULL) && (q->q_next != NULL)) { 2844 (void) putnextctl1(q, M_FLUSH, FLUSHR); 2845 } 2846 } 2847 2848 2849 static void 2850 hid_pm_busy_component(hid_state_t *hid_statep) 2851 { 2852 ASSERT(!mutex_owned(&hid_statep->hid_mutex)); 2853 2854 if (hid_statep->hid_pm != NULL) { 2855 mutex_enter(&hid_statep->hid_mutex); 2856 hid_statep->hid_pm->hid_pm_busy++; 2857 2858 USB_DPRINTF_L4(PRINT_MASK_PM, hid_statep->hid_log_handle, 2859 "hid_pm_busy_component: %d", 2860 hid_statep->hid_pm->hid_pm_busy); 2861 2862 mutex_exit(&hid_statep->hid_mutex); 2863 if (pm_busy_component(hid_statep->hid_dip, 0) != DDI_SUCCESS) { 2864 mutex_enter(&hid_statep->hid_mutex); 2865 hid_statep->hid_pm->hid_pm_busy--; 2866 2867 USB_DPRINTF_L2(PRINT_MASK_PM, 2868 hid_statep->hid_log_handle, 2869 "hid_pm_busy_component failed: %d", 2870 hid_statep->hid_pm->hid_pm_busy); 2871 2872 mutex_exit(&hid_statep->hid_mutex); 2873 } 2874 2875 } 2876 } 2877 2878 2879 static void 2880 hid_pm_idle_component(hid_state_t *hid_statep) 2881 { 2882 ASSERT(!mutex_owned(&hid_statep->hid_mutex)); 2883 2884 if (hid_statep->hid_pm != NULL) { 2885 if (pm_idle_component(hid_statep->hid_dip, 0) == DDI_SUCCESS) { 2886 mutex_enter(&hid_statep->hid_mutex); 2887 ASSERT(hid_statep->hid_pm->hid_pm_busy > 0); 2888 hid_statep->hid_pm->hid_pm_busy--; 2889 2890 USB_DPRINTF_L4(PRINT_MASK_PM, 2891 hid_statep->hid_log_handle, 2892 "hid_pm_idle_component: %d", 2893 hid_statep->hid_pm->hid_pm_busy); 2894 2895 mutex_exit(&hid_statep->hid_mutex); 2896 } 2897 } 2898 } 2899 2900 2901 /* 2902 * hid_pwrlvl0: 2903 * Functions to handle power transition for various levels 2904 * These functions act as place holders to issue USB commands 2905 * to the devices to change their power levels 2906 */ 2907 static int 2908 hid_pwrlvl0(hid_state_t *hidp) 2909 { 2910 hid_power_t *hidpm; 2911 int rval; 2912 struct iocblk *mctlmsg; 2913 mblk_t *mp_lowpwr, *mp_fullpwr; 2914 queue_t *q; 2915 2916 hidpm = hidp->hid_pm; 2917 2918 switch (hidp->hid_dev_state) { 2919 case USB_DEV_ONLINE: 2920 /* Deny the powerdown request if the device is busy */ 2921 if (hidpm->hid_pm_busy != 0) { 2922 2923 return (USB_FAILURE); 2924 } 2925 2926 if (hidp->hid_streams_flags == HID_STREAMS_OPEN) { 2927 q = hidp->hid_rq_ptr; 2928 mutex_exit(&hidp->hid_mutex); 2929 if (canputnext(q)) { 2930 /* try to preallocate mblks */ 2931 mp_lowpwr = allocb( 2932 (int)sizeof (struct iocblk), BPRI_HI); 2933 mp_fullpwr = allocb( 2934 (int)sizeof (struct iocblk), BPRI_HI); 2935 if ((mp_lowpwr != NULL) && 2936 (mp_fullpwr != NULL)) { 2937 /* stop polling */ 2938 usb_pipe_stop_intr_polling( 2939 hidp->hid_interrupt_pipe, 2940 USB_FLAGS_SLEEP); 2941 2942 /* 2943 * Send an MCTL up indicating that 2944 * we are powering off 2945 */ 2946 mp_lowpwr->b_datap->db_type = M_CTL; 2947 mctlmsg = (struct iocblk *) 2948 mp_lowpwr->b_datap->db_base; 2949 mctlmsg->ioc_cmd = HID_POWER_OFF; 2950 mctlmsg->ioc_count = 0; 2951 putnext(q, mp_lowpwr); 2952 2953 /* save the full powr mblk */ 2954 mutex_enter(&hidp->hid_mutex); 2955 hidpm->hid_pm_pwrup = mp_fullpwr; 2956 } else { 2957 /* 2958 * Since we failed to allocate one 2959 * or more mblks, we fail attempt 2960 * to go into low power this time 2961 */ 2962 freemsg(mp_lowpwr); 2963 freemsg(mp_fullpwr); 2964 mutex_enter(&hidp->hid_mutex); 2965 2966 return (USB_FAILURE); 2967 } 2968 } else { 2969 /* 2970 * Since we can't send an mblk up, 2971 * we fail this attempt to go to low power 2972 */ 2973 mutex_enter(&hidp->hid_mutex); 2974 2975 return (USB_FAILURE); 2976 } 2977 } 2978 mutex_exit(&hidp->hid_mutex); 2979 /* Issue USB D3 command to the device here */ 2980 rval = usb_set_device_pwrlvl3(hidp->hid_dip); 2981 ASSERT(rval == USB_SUCCESS); 2982 2983 mutex_enter(&hidp->hid_mutex); 2984 hidp->hid_dev_state = USB_DEV_PWRED_DOWN; 2985 hidpm->hid_current_power = USB_DEV_OS_PWR_OFF; 2986 2987 /* FALLTHRU */ 2988 case USB_DEV_DISCONNECTED: 2989 case USB_DEV_SUSPENDED: 2990 case USB_DEV_PWRED_DOWN: 2991 default: 2992 break; 2993 } 2994 2995 return (USB_SUCCESS); 2996 } 2997 2998 2999 /* ARGSUSED */ 3000 static int 3001 hid_pwrlvl1(hid_state_t *hidp) 3002 { 3003 int rval; 3004 3005 /* Issue USB D2 command to the device here */ 3006 rval = usb_set_device_pwrlvl2(hidp->hid_dip); 3007 ASSERT(rval == USB_SUCCESS); 3008 3009 return (USB_FAILURE); 3010 } 3011 3012 3013 /* ARGSUSED */ 3014 static int 3015 hid_pwrlvl2(hid_state_t *hidp) 3016 { 3017 int rval; 3018 3019 rval = usb_set_device_pwrlvl1(hidp->hid_dip); 3020 ASSERT(rval == USB_SUCCESS); 3021 3022 return (USB_FAILURE); 3023 } 3024 3025 3026 static int 3027 hid_pwrlvl3(hid_state_t *hidp) 3028 { 3029 hid_power_t *hidpm; 3030 int rval; 3031 struct iocblk *mctlmsg; 3032 mblk_t *mp; 3033 queue_t *q; 3034 3035 hidpm = hidp->hid_pm; 3036 3037 switch (hidp->hid_dev_state) { 3038 case USB_DEV_HID_POWER_CHANGE: 3039 case USB_DEV_PWRED_DOWN: 3040 /* Issue USB D0 command to the device here */ 3041 rval = usb_set_device_pwrlvl0(hidp->hid_dip); 3042 ASSERT(rval == USB_SUCCESS); 3043 3044 if (hidp->hid_streams_flags == HID_STREAMS_OPEN) { 3045 /* restart polling on intr pipe */ 3046 rval = hid_start_intr_polling(hidp); 3047 if (rval != USB_SUCCESS) { 3048 USB_DPRINTF_L2(PRINT_MASK_EVENTS, 3049 hidp->hid_log_handle, 3050 "unable to restart intr polling rval = %d", 3051 rval); 3052 3053 return (USB_FAILURE); 3054 } 3055 3056 /* Send an MCTL up indicating device in full power */ 3057 q = hidp->hid_rq_ptr; 3058 mp = hidpm->hid_pm_pwrup; 3059 hidpm->hid_pm_pwrup = NULL; 3060 mutex_exit(&hidp->hid_mutex); 3061 if (canputnext(q)) { 3062 mp->b_datap->db_type = M_CTL; 3063 mctlmsg = (struct iocblk *)mp->b_datap->db_base; 3064 mctlmsg->ioc_cmd = HID_FULL_POWER; 3065 mctlmsg->ioc_count = 0; 3066 putnext(q, mp); 3067 } else { 3068 freemsg(mp); 3069 } 3070 mutex_enter(&hidp->hid_mutex); 3071 } 3072 hidp->hid_dev_state = USB_DEV_ONLINE; 3073 hidpm->hid_current_power = USB_DEV_OS_FULL_PWR; 3074 3075 /* FALLTHRU */ 3076 case USB_DEV_DISCONNECTED: 3077 case USB_DEV_SUSPENDED: 3078 case USB_DEV_ONLINE: 3079 3080 return (USB_SUCCESS); 3081 default: 3082 USB_DPRINTF_L2(PRINT_MASK_EVENTS, hidp->hid_log_handle, 3083 "hid_pwrlvl3: Improper State"); 3084 3085 return (USB_FAILURE); 3086 } 3087 } 3088 3089 3090 /* 3091 * hid_polled_input_init : 3092 * This routine calls down to the lower layers to initialize any state 3093 * information. This routine initializes the lower layers for input. 3094 */ 3095 static int 3096 hid_polled_input_init(hid_state_t *hidp) 3097 { 3098 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 3099 "hid_polled_input_init"); 3100 3101 /* 3102 * Call the lower layers to intialize any state information 3103 * that they will need to provide the polled characters. 3104 */ 3105 if (usb_console_input_init(hidp->hid_dip, hidp->hid_interrupt_pipe, 3106 &hidp->hid_polled_raw_buf, 3107 &hidp->hid_polled_console_info) != USB_SUCCESS) { 3108 /* 3109 * If for some reason the lower layers cannot initialized, then 3110 * bail. 3111 */ 3112 (void) hid_polled_input_fini(hidp); 3113 3114 return (USB_FAILURE); 3115 } 3116 3117 return (USB_SUCCESS); 3118 } 3119 3120 3121 /* 3122 * hid_polled_input_fini: 3123 * This routine is called when we are done using this device as an input 3124 * device. 3125 */ 3126 static int 3127 hid_polled_input_fini(hid_state_t *hidp) 3128 { 3129 USB_DPRINTF_L4(PRINT_MASK_ALL, hidp->hid_log_handle, 3130 "hid_polled_input_fini"); 3131 3132 /* 3133 * Call the lower layers to free any state information 3134 * only if polled input has been initialised. 3135 */ 3136 if ((hidp->hid_polled_console_info) && 3137 (usb_console_input_fini(hidp->hid_polled_console_info) != 3138 USB_SUCCESS)) { 3139 3140 return (USB_FAILURE); 3141 } 3142 hidp->hid_polled_console_info = NULL; 3143 3144 return (USB_SUCCESS); 3145 } 3146 3147 3148 /* 3149 * hid_polled_input_enter: 3150 * This is the routine that is called in polled mode to save the USB 3151 * state information before using the USB keyboard as an input device. 3152 * This routine, and all of the routines that it calls, are responsible 3153 * for saving any state information so that it can be restored when 3154 * polling mode is over. 3155 */ 3156 static int 3157 /* ARGSUSED */ 3158 hid_polled_input_enter(hid_polled_handle_t hid_polled_inputp) 3159 { 3160 hid_state_t *hidp = (hid_state_t *)hid_polled_inputp; 3161 3162 /* 3163 * Call the lower layers to tell them to save any state information. 3164 */ 3165 (void) usb_console_input_enter(hidp->hid_polled_console_info); 3166 3167 return (USB_SUCCESS); 3168 } 3169 3170 3171 /* 3172 * hid_polled_read : 3173 * This is the routine that is called in polled mode when it wants to read 3174 * a character. We will call to the lower layers to see if there is any 3175 * input data available. If there is USB scancodes available, we will 3176 * give them back. 3177 */ 3178 static int 3179 hid_polled_read(hid_polled_handle_t hid_polled_input, uchar_t **buffer) 3180 { 3181 hid_state_t *hidp = (hid_state_t *)hid_polled_input; 3182 uint_t num_bytes; 3183 3184 /* 3185 * Call the lower layers to get the character from the controller. 3186 * The lower layers will return the number of characters that 3187 * were put in the raw buffer. The address of the raw buffer 3188 * was passed down to the lower layers during hid_polled_init. 3189 */ 3190 if (usb_console_read(hidp->hid_polled_console_info, 3191 &num_bytes) != USB_SUCCESS) { 3192 3193 return (0); 3194 } 3195 3196 /*LINTED*/ 3197 _NOTE(NO_COMPETING_THREADS_NOW); 3198 3199 *buffer = hidp->hid_polled_raw_buf; 3200 3201 /*LINTED*/ 3202 _NOTE(COMPETING_THREADS_NOW); 3203 3204 /* 3205 * Return the number of characters that were copied into the 3206 * polled buffer. 3207 */ 3208 return (num_bytes); 3209 } 3210 3211 3212 /* 3213 * hid_polled_input_exit : 3214 * This is the routine that is called in polled mode when it is giving up 3215 * control of the USB keyboard. This routine, and the lower layer routines 3216 * that it calls, are responsible for restoring the controller state to the 3217 * state it was in before polled mode. 3218 */ 3219 static int 3220 hid_polled_input_exit(hid_polled_handle_t hid_polled_inputp) 3221 { 3222 hid_state_t *hidp = (hid_state_t *)hid_polled_inputp; 3223 3224 /* 3225 * Call the lower layers to restore any state information. 3226 */ 3227 (void) usb_console_input_exit(hidp->hid_polled_console_info); 3228 3229 return (0); 3230 } 3231 3232 static void 3233 hid_consconfig_relink(void *arg) 3234 { 3235 hid_state_t *hidp = (hid_state_t *)arg; 3236 3237 consconfig_link(ddi_driver_major(hidp->hid_dip), 3238 HID_MINOR_MAKE_INTERNAL(hidp->hid_minor)); 3239 } 3240