1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #include <sys/note.h> 27 28 /* 29 * Generic SCSI Host Bus Adapter interface implementation 30 */ 31 #include <sys/scsi/scsi.h> 32 #include <sys/file.h> 33 #include <sys/ddi_impldefs.h> 34 #include <sys/ndi_impldefs.h> 35 #include <sys/ddi.h> 36 #include <sys/epm.h> 37 38 extern struct scsi_pkt *scsi_init_cache_pkt(struct scsi_address *, 39 struct scsi_pkt *, struct buf *, int, int, int, int, 40 int (*)(caddr_t), caddr_t); 41 extern void scsi_free_cache_pkt(struct scsi_address *, 42 struct scsi_pkt *); 43 extern void scsi_cache_dmafree(struct scsi_address *, 44 struct scsi_pkt *); 45 extern void scsi_sync_cache_pkt(struct scsi_address *, 46 struct scsi_pkt *); 47 48 /* 49 * Round up all allocations so that we can guarantee 50 * long-long alignment. This is the same alignment 51 * provided by kmem_alloc(). 52 */ 53 #define ROUNDUP(x) (((x) + 0x07) & ~0x07) 54 55 /* Magic number to track correct allocations in wrappers */ 56 #define PKT_WRAPPER_MAGIC 0xa110ced /* alloced correctly */ 57 58 kmutex_t scsi_flag_nointr_mutex; 59 kcondvar_t scsi_flag_nointr_cv; 60 kmutex_t scsi_log_mutex; 61 62 /* 63 * Prototypes for static functions 64 */ 65 static int scsi_hba_bus_ctl( 66 dev_info_t *self, 67 dev_info_t *child, 68 ddi_ctl_enum_t op, 69 void *arg, 70 void *result); 71 72 static int scsi_hba_map_fault( 73 dev_info_t *self, 74 dev_info_t *child, 75 struct hat *hat, 76 struct seg *seg, 77 caddr_t addr, 78 struct devpage *dp, 79 pfn_t pfn, 80 uint_t prot, 81 uint_t lock); 82 83 static int scsi_hba_get_eventcookie( 84 dev_info_t *self, 85 dev_info_t *child, 86 char *name, 87 ddi_eventcookie_t *eventp); 88 89 static int scsi_hba_add_eventcall( 90 dev_info_t *self, 91 dev_info_t *child, 92 ddi_eventcookie_t event, 93 void (*callback)( 94 dev_info_t *dip, 95 ddi_eventcookie_t event, 96 void *arg, 97 void *bus_impldata), 98 void *arg, 99 ddi_callback_id_t *cb_id); 100 101 static int scsi_hba_remove_eventcall( 102 dev_info_t *self, 103 ddi_callback_id_t id); 104 105 static int scsi_hba_post_event( 106 dev_info_t *self, 107 dev_info_t *child, 108 ddi_eventcookie_t event, 109 void *bus_impldata); 110 111 static int scsi_hba_info( 112 dev_info_t *self, 113 ddi_info_cmd_t infocmd, 114 void *arg, 115 void **result); 116 117 static int scsi_hba_bus_config( 118 dev_info_t *self, 119 uint_t flags, 120 ddi_bus_config_op_t op, 121 void *arg, 122 dev_info_t **childp); 123 124 static int scsi_hba_bus_unconfig( 125 dev_info_t *self, 126 uint_t flags, 127 ddi_bus_config_op_t op, 128 void *arg); 129 130 static int scsi_hba_fm_init_child( 131 dev_info_t *self, 132 dev_info_t *child, 133 int cap, 134 ddi_iblock_cookie_t *ibc); 135 136 static int scsi_hba_bus_power( 137 dev_info_t *self, 138 void *impl_arg, 139 pm_bus_power_op_t op, 140 void *arg, 141 void *result); 142 143 /* busops vector for SCSI HBA's. */ 144 static struct bus_ops scsi_hba_busops = { 145 BUSO_REV, 146 nullbusmap, /* bus_map */ 147 NULL, /* bus_get_intrspec */ 148 NULL, /* bus_add_intrspec */ 149 NULL, /* bus_remove_intrspec */ 150 scsi_hba_map_fault, /* bus_map_fault */ 151 ddi_dma_map, /* bus_dma_map */ 152 ddi_dma_allochdl, /* bus_dma_allochdl */ 153 ddi_dma_freehdl, /* bus_dma_freehdl */ 154 ddi_dma_bindhdl, /* bus_dma_bindhdl */ 155 ddi_dma_unbindhdl, /* bus_unbindhdl */ 156 ddi_dma_flush, /* bus_dma_flush */ 157 ddi_dma_win, /* bus_dma_win */ 158 ddi_dma_mctl, /* bus_dma_ctl */ 159 scsi_hba_bus_ctl, /* bus_ctl */ 160 ddi_bus_prop_op, /* bus_prop_op */ 161 scsi_hba_get_eventcookie, /* bus_get_eventcookie */ 162 scsi_hba_add_eventcall, /* bus_add_eventcall */ 163 scsi_hba_remove_eventcall, /* bus_remove_eventcall */ 164 scsi_hba_post_event, /* bus_post_event */ 165 NULL, /* bus_intr_ctl */ 166 scsi_hba_bus_config, /* bus_config */ 167 scsi_hba_bus_unconfig, /* bus_unconfig */ 168 scsi_hba_fm_init_child, /* bus_fm_init */ 169 NULL, /* bus_fm_fini */ 170 NULL, /* bus_fm_access_enter */ 171 NULL, /* bus_fm_access_exit */ 172 scsi_hba_bus_power /* bus_power */ 173 }; 174 175 /* cb_ops for hotplug :devctl and :scsi support */ 176 static struct cb_ops scsi_hba_cbops = { 177 scsi_hba_open, 178 scsi_hba_close, 179 nodev, /* strategy */ 180 nodev, /* print */ 181 nodev, /* dump */ 182 nodev, /* read */ 183 nodev, /* write */ 184 scsi_hba_ioctl, /* ioctl */ 185 nodev, /* devmap */ 186 nodev, /* mmap */ 187 nodev, /* segmap */ 188 nochpoll, /* poll */ 189 ddi_prop_op, /* prop_op */ 190 NULL, /* stream */ 191 D_NEW|D_MP|D_HOTPLUG, /* cb_flag */ 192 CB_REV, /* rev */ 193 nodev, /* int (*cb_aread)() */ 194 nodev /* int (*cb_awrite)() */ 195 }; 196 197 /* 198 * SCSI_HBA_LOG is used for all messages. Both a logging level and a component 199 * are specified when generating a message. Some levels correspond directly to 200 * cmn_err levels, the others are associated with increasing levels diagnostic. 201 * The component is used to identify groups of messages by utility, typically 202 * the entry point. Filtering is provided for both the level and component. 203 * Messages with cmn_err levels or not associated with a component 204 * (SCSI_HBA_LOG_NC) are never filtered. 205 * 206 * For debugging, more complete information can be displayed with each message 207 * (full device path and pointer values). 208 */ 209 /* logging levels */ 210 #define SCSI_HBA_LOGCONT CE_CONT 211 #define SCSI_HBA_LOGNOTE CE_NOTE 212 #define SCSI_HBA_LOGWARN CE_WARN 213 #define SCSI_HBA_LOGPANIC CE_PANIC 214 #define SCSI_HBA_LOGIGNORE CE_IGNORE 215 #define SCSI_HBA_LOG_CE_MASK 0x0000000F /* no filter */ 216 #define SCSI_HBA_LOGDIAG1 0x00000010 217 #define SCSI_HBA_LOGDIAG2 0x00000020 218 #define SCSI_HBA_LOGDIAG3 0x00000040 219 #define SCSI_HBA_LOGDIAG4 0x00000080 220 #define SCSI_HBA_LOGTRACE 0x00000100 221 #if (CE_CONT | CE_NOTE | CE_WARN | CE_PANIC | CE_IGNORE) > SCSI_HBA_LOG_CE_MASK 222 Error, problem with CE_ definitions 223 #endif 224 225 /* logging components */ 226 #define SCSI_HBA_LOG_NC 0x00000000 /* no filter */ 227 #define SCSI_HBA_LOG_INITIALIZE_HBA_INTERFACE 0x00000001 228 #define SCSI_HBA_LOG_ATTACH_SETUP 0x00000002 229 #define SCSI_HBA_LOG_BUS_CTL 0x00000004 230 231 #define SCSI_HBA_LOG_BUS_CONFIG 0x00000010 232 #define SCSI_HBA_LOG_BUS_CONFIGONE 0x00000020 233 #define SCSI_HBA_LOG_BUS_CONFIGALL_SPI 0x00000040 234 #define SCSI_HBA_LOG_ENUM_LUNS_ON_TGT 0x00000080 235 236 #define SCSI_HBA_LOG_DEVICE_REPORTLUNS 0x00000100 237 #define SCSI_HBA_LOG_DEVICE_CONFIG 0x00000200 238 #define SCSI_HBA_LOG_DEVICE_CONFIGCHILD 0x00000400 239 #define SCSI_HBA_LOG_DEVICE_CREATECHILD 0x00000800 240 241 #define SCSI_HBA_LOG_DEVICE_INITCHILD 0x00001000 242 243 #define SCSI_HBA_LOG_BUS_UNCONFIG 0x00010000 244 #define SCSI_HBA_LOG_BUS_UNCONFIGONE 0x00020000 245 #define SCSI_HBA_LOG_BUS_UNCONFIGALL_SPI 0x00040000 246 #define SCSI_HBA_LOG_DEVICE_UNINITCHILD 0x00080000 247 248 #define SCSI_HBA_LOG_REMOVE_NODE 0x00100000 249 250 #define SCSI_HBA_LOG_MSCSI_BUS_CONFIG_PORT 0x01000000 251 #define SCSI_HBA_LOG_MSCSI_DEFINE_PORT 0x02000000 252 253 #define SCSI_HBA_LOG_BADLUN 0x10000000 254 #define SCSI_HBA_LOG_PKT_ALLOC 0x20000000 255 #define SCSI_HBA_LOG_DEVI_FIND 0x40000000 256 257 258 #define SCSI_HBA_LOG_ASCII { \ 259 "scsi_hba_initialize_hba_interface", \ 260 "scsi_hba_attach_setup", \ 261 "scsi_hba_bus_ctl", \ 262 "-", \ 263 \ 264 "scsi_hba_bus_config", \ 265 "scsi_hba_bus_configone", \ 266 "scsi_hba_bus_configall_spi", \ 267 "scsi_hba_enum_luns_on_tgt", \ 268 \ 269 "scsi_hba_device_reportluns", \ 270 "scsi_hba_device_config", \ 271 "scsi_hba_device_configchild", \ 272 "scsi_hba_device_createchild", \ 273 \ 274 "scsi_busctl_initchild", \ 275 "-", \ 276 "-", \ 277 "-", \ 278 \ 279 "scsi_hba_bus_unconfig", \ 280 "scsi_hba_bus_unconfigone", \ 281 "scsi_hba_bus_unconfigall_spi", \ 282 "scsi_busctl_uninitchild", \ 283 \ 284 "scsi_hba_remove_node", \ 285 "-", \ 286 "-", \ 287 "-", \ 288 \ 289 "scsi_hba_mscsi_bus_config_port", \ 290 "scsi_hba_mscsi_define_port", \ 291 "-", \ 292 "-", \ 293 \ 294 "scsi_hba_badlun", \ 295 "scsi_hba_pkt_alloc", \ 296 "scsi_hba_devi_find", \ 297 NULL } 298 299 /* 300 * Tunable log message augmentation and filters: filters do not apply to 301 * SCSI_HBA_LOG_CE_MASK level or SCSI_HBA_LOG_NC component messages. 302 * 303 * An example set of /etc/system tunings to debug a SCSA HBA driver called 304 * "fp" might be: 305 * echo "set scsi:scsi_hba_log_filter_level=0xff" >> /etc/system 306 * echo "set scsi:scsi_hba_log_filter_hba=\"fp\"" >> /etc/system 307 * echo "set scsi:scsi_hba_log_info=0x5" >> /etc/system 308 * echo "set scsi:scsi_hba_log_mt_disable=0x6" >> /etc/system 309 */ 310 int scsi_hba_log_filter_level = 311 SCSI_HBA_LOGDIAG1 | 312 0; 313 int scsi_hba_log_filter_component = 314 -1; /* all components */ 315 char *scsi_hba_log_filter_hba = "\0\0\0\0\0\0\0\0\0\0\0\0"; 316 int scsi_hba_log_info = /* augmentation: extra info to print */ 317 (0 << 0) | /* 0x0001: process information */ 318 (0 << 1) | /* 0x0002: full devices path */ 319 (0 << 2); /* 0x0004: devinfo pointer */ 320 int scsi_hba_log_mt_disable = 321 /* SCSI_ENUMERATION_MT_LUN_DISABLE | */ 322 /* SCSI_ENUMERATION_MT_TARGET_DISABLE | */ 323 0; 324 325 /* static data for HBA logging subsystem */ 326 static kmutex_t scsi_hba_log_mutex; 327 static char scsi_hba_log_i[512]; 328 static char scsi_hba_log_buf[512]; 329 static char scsi_hba_fmt[64]; 330 static char *scsi_hba_log_lab[] = SCSI_HBA_LOG_ASCII; 331 332 /* Macros to use in source code */ 333 #define _LOG(level, component) SCSI_HBA_LOG##level, SCSI_HBA_LOG_##component 334 #define SCSI_HBA_LOG(x) scsi_hba_log x 335 336 /*PRINTFLIKE5*/ 337 void 338 scsi_hba_log(int level, int component, 339 dev_info_t *self, dev_info_t *child, const char *fmt, ...) 340 { 341 va_list ap; 342 int clevel; 343 char *info; 344 char *clabel; 345 char *f; 346 int i; 347 348 /* derive self from child's parent */ 349 if ((self == NULL) && child) 350 self = ddi_get_parent(child); 351 352 /* always allow filtering on TRACE calls */ 353 if ((level & SCSI_HBA_LOGTRACE) && 354 ((scsi_hba_log_filter_level & SCSI_HBA_LOGTRACE) == 0)) 355 return; 356 357 /* no filtering of SCSI_HBA_LOG_CE_MASK or NC messages */ 358 if (((level & SCSI_HBA_LOG_CE_MASK) != level) && 359 (component != SCSI_HBA_LOG_NC)) { 360 /* filter on level */ 361 if ((level & scsi_hba_log_filter_level) == 0) 362 return; 363 364 /* filter on component */ 365 if ((component & scsi_hba_log_filter_component) == 0) 366 return; 367 368 /* filter on self */ 369 if (self && scsi_hba_log_filter_hba && 370 *scsi_hba_log_filter_hba && 371 ((ddi_driver_name(self) == NULL) || 372 strcmp(ddi_driver_name(self), scsi_hba_log_filter_hba))) 373 return; 374 } 375 376 377 /* determine the cmn_err form */ 378 clevel = ((level & SCSI_HBA_LOG_CE_MASK) == level) ? level : CE_CONT; 379 380 /* determine the component label, SCSI_HBA_LOG_NC has none */ 381 clabel = NULL; 382 for (i = 0; scsi_hba_log_lab[i]; i++) { 383 if (component & (1 << i)) { 384 clabel = scsi_hba_log_lab[i]; 385 break; 386 } 387 } 388 389 if ((clabel == NULL) && (level & SCSI_HBA_LOGTRACE)) 390 clabel = "trace"; 391 392 mutex_enter(&scsi_hba_log_mutex); 393 394 /* skip special first characters, we add them back below */ 395 f = (char *)fmt; 396 if (*f && strchr("^!?", *f)) 397 f++; 398 va_start(ap, fmt); 399 (void) vsprintf(scsi_hba_log_buf, f, ap); 400 va_end(ap); 401 402 /* augment message */ 403 info = scsi_hba_log_i; 404 *info = '\0'; 405 if ((scsi_hba_log_info & 0x0001) && curproc && PTOU(curproc)->u_comm) { 406 (void) sprintf(info, "%s[%d]%p ", 407 PTOU(curproc)->u_comm, curproc->p_pid, (void *)curthread); 408 info += strlen(info); 409 } 410 if (self) { 411 if ((scsi_hba_log_info & 0x0004) && (child || self)) { 412 (void) sprintf(info, "%p ", 413 (void *)(child ? child : self)); 414 info += strlen(info); 415 } 416 if (scsi_hba_log_info & 0x0002) { 417 (void) ddi_pathname(child ? child : self, info); 418 (void) strcat(info, " "); 419 info += strlen(info); 420 } else { 421 (void) sprintf(info, "%s%d: ", 422 ddi_driver_name(self), ddi_get_instance(self)); 423 info += strlen(info); 424 if (child) { 425 if (i_ddi_node_state(child) < DS_INITIALIZED) 426 (void) sprintf(info, "%s ", 427 ddi_node_name(child)); 428 else 429 (void) sprintf(info, "%s@%s ", 430 ddi_node_name(child), 431 ddi_get_name_addr(child)); 432 info += strlen(info); 433 } 434 } 435 } 436 437 /* special first characters must be in format string itself */ 438 f = scsi_hba_fmt; 439 if (fmt[0] && strchr("^!?", fmt[0])) 440 *f++ = fmt[0]; 441 (void) sprintf(f, "%s", clabel ? "%s: %s%s%s" : "%s%s%s"); 442 if (clabel) 443 cmn_err(clevel, scsi_hba_fmt, clabel, scsi_hba_log_i, 444 scsi_hba_log_buf, clevel == CE_CONT ? "\n" : ""); 445 else 446 cmn_err(clevel, scsi_hba_fmt, scsi_hba_log_i, 447 scsi_hba_log_buf, clevel == CE_CONT ? "\n" : ""); 448 mutex_exit(&scsi_hba_log_mutex); 449 } 450 451 /* 452 * Called from _init() when loading "scsi" module 453 */ 454 void 455 scsi_initialize_hba_interface() 456 { 457 SCSI_HBA_LOG((_LOG(TRACE, NC), NULL, NULL, 458 "scsi_initialize_hba_interface")); 459 460 mutex_init(&scsi_log_mutex, NULL, MUTEX_DRIVER, NULL); 461 mutex_init(&scsi_flag_nointr_mutex, NULL, MUTEX_DRIVER, NULL); 462 cv_init(&scsi_flag_nointr_cv, NULL, CV_DRIVER, NULL); 463 mutex_init(&scsi_hba_log_mutex, NULL, MUTEX_DRIVER, NULL); 464 } 465 466 int 467 scsi_hba_pkt_constructor(void *buf, void *arg, int kmflag) 468 { 469 struct scsi_pkt_cache_wrapper *pktw; 470 struct scsi_pkt *pkt; 471 scsi_hba_tran_t *tran = (scsi_hba_tran_t *)arg; 472 int pkt_len; 473 char *ptr; 474 475 /* 476 * allocate a chunk of memory for the following: 477 * scsi_pkt 478 * pcw_* fields 479 * pkt_ha_private 480 * pkt_cdbp, if needed 481 * (pkt_private always null) 482 * pkt_scbp, if needed 483 */ 484 pkt_len = tran->tran_hba_len + sizeof (struct scsi_pkt_cache_wrapper); 485 if (tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) 486 pkt_len += DEFAULT_CDBLEN; 487 if (tran->tran_hba_flags & SCSI_HBA_TRAN_SCB) 488 pkt_len += DEFAULT_SCBLEN; 489 bzero(buf, pkt_len); 490 491 ptr = buf; 492 pktw = buf; 493 ptr += sizeof (struct scsi_pkt_cache_wrapper); 494 pkt = &(pktw->pcw_pkt); 495 pkt->pkt_ha_private = (opaque_t)ptr; 496 497 pktw->pcw_magic = PKT_WRAPPER_MAGIC; /* alloced correctly */ 498 /* 499 * keep track of the granularity at the time this handle was 500 * allocated 501 */ 502 pktw->pcw_granular = tran->tran_dma_attr.dma_attr_granular; 503 504 if (ddi_dma_alloc_handle(tran->tran_hba_dip, 505 &tran->tran_dma_attr, 506 kmflag == KM_SLEEP ? SLEEP_FUNC: NULL_FUNC, NULL, 507 &pkt->pkt_handle) != DDI_SUCCESS) { 508 509 return (-1); 510 } 511 ptr += tran->tran_hba_len; 512 if (tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) { 513 pkt->pkt_cdbp = (opaque_t)ptr; 514 ptr += DEFAULT_CDBLEN; 515 } 516 pkt->pkt_private = NULL; 517 if (tran->tran_hba_flags & SCSI_HBA_TRAN_SCB) 518 pkt->pkt_scbp = (opaque_t)ptr; 519 if (tran->tran_pkt_constructor) 520 return ((*tran->tran_pkt_constructor)(pkt, arg, kmflag)); 521 else 522 return (0); 523 } 524 525 #define P_TO_TRAN(pkt) ((pkt)->pkt_address.a_hba_tran) 526 527 void 528 scsi_hba_pkt_destructor(void *buf, void *arg) 529 { 530 struct scsi_pkt_cache_wrapper *pktw = buf; 531 struct scsi_pkt *pkt = &(pktw->pcw_pkt); 532 scsi_hba_tran_t *tran = (scsi_hba_tran_t *)arg; 533 534 ASSERT(pktw->pcw_magic == PKT_WRAPPER_MAGIC); 535 ASSERT((pktw->pcw_flags & PCW_BOUND) == 0); 536 if (tran->tran_pkt_destructor) 537 (*tran->tran_pkt_destructor)(pkt, arg); 538 539 /* make sure nobody messed with our pointers */ 540 ASSERT(pkt->pkt_ha_private == (opaque_t)((char *)pkt + 541 sizeof (struct scsi_pkt_cache_wrapper))); 542 ASSERT(((tran->tran_hba_flags & SCSI_HBA_TRAN_SCB) == 0) || 543 (pkt->pkt_scbp == (opaque_t)((char *)pkt + 544 tran->tran_hba_len + 545 (((tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) == 0) ? 546 0 : DEFAULT_CDBLEN) + 547 DEFAULT_PRIVLEN + sizeof (struct scsi_pkt_cache_wrapper)))); 548 ASSERT(((tran->tran_hba_flags & SCSI_HBA_TRAN_CDB) == 0) || 549 (pkt->pkt_cdbp == (opaque_t)((char *)pkt + 550 tran->tran_hba_len + 551 sizeof (struct scsi_pkt_cache_wrapper)))); 552 ASSERT(pkt->pkt_handle); 553 ddi_dma_free_handle(&pkt->pkt_handle); 554 pkt->pkt_handle = NULL; 555 pkt->pkt_numcookies = 0; 556 pktw->pcw_total_xfer = 0; 557 pktw->pcw_totalwin = 0; 558 pktw->pcw_curwin = 0; 559 } 560 561 /* 562 * Called by an HBA from _init() to plumb in common SCSA bus_ops and 563 * cb_ops for the HBA's :devctl and :scsi minor nodes. 564 */ 565 int 566 scsi_hba_init(struct modlinkage *modlp) 567 { 568 struct dev_ops *hba_dev_ops; 569 570 SCSI_HBA_LOG((_LOG(TRACE, NC), NULL, NULL, "scsi_hba_init")); 571 572 /* 573 * Get a pointer to the dev_ops structure of the HBA and plumb our 574 * bus_ops vector into the HBA's dev_ops structure. 575 */ 576 hba_dev_ops = ((struct modldrv *)(modlp->ml_linkage[0]))->drv_dev_ops; 577 ASSERT(hba_dev_ops->devo_bus_ops == NULL); 578 hba_dev_ops->devo_bus_ops = &scsi_hba_busops; 579 580 /* 581 * Plumb our cb_ops vector into the HBA's dev_ops structure to 582 * provide getinfo and hotplugging ioctl support if the HBA driver 583 * does not already provide this support. 584 */ 585 if (hba_dev_ops->devo_cb_ops == NULL) { 586 hba_dev_ops->devo_cb_ops = &scsi_hba_cbops; 587 } 588 if (hba_dev_ops->devo_cb_ops->cb_open == scsi_hba_open) { 589 ASSERT(hba_dev_ops->devo_cb_ops->cb_close == scsi_hba_close); 590 hba_dev_ops->devo_getinfo = scsi_hba_info; 591 } 592 return (0); 593 } 594 595 /* 596 * Called by an HBA attach(9E) to allocate a scsi_hba_tran structure. An HBA 597 * driver will then initialize the structure and then call 598 * scsi_hba_attach_setup. 599 */ 600 /*ARGSUSED*/ 601 scsi_hba_tran_t * 602 scsi_hba_tran_alloc( 603 dev_info_t *self, 604 int flags) 605 { 606 scsi_hba_tran_t *tran; 607 608 SCSI_HBA_LOG((_LOG(TRACE, NC), self, NULL, "scsi_hba_tran_alloc")); 609 610 tran = kmem_zalloc(sizeof (scsi_hba_tran_t), 611 (flags & SCSI_HBA_CANSLEEP) ? KM_SLEEP : KM_NOSLEEP); 612 613 tran->tran_interconnect_type = INTERCONNECT_PARALLEL; 614 tran->tran_hba_flags |= SCSI_HBA_TRAN_ALLOC; 615 616 return (tran); 617 } 618 619 /* 620 * Called by an HBA to free a scsi_hba_tran structure 621 */ 622 void 623 scsi_hba_tran_free( 624 scsi_hba_tran_t *tran) 625 { 626 SCSI_HBA_LOG((_LOG(TRACE, NC), NULL, NULL, "scsi_hba_tran_free")); 627 628 kmem_free(tran, sizeof (scsi_hba_tran_t)); 629 } 630 631 int 632 scsi_tran_ext_alloc( 633 scsi_hba_tran_t *tran, 634 size_t length, 635 int flags) 636 { 637 void *tran_ext; 638 int ret = DDI_FAILURE; 639 640 tran_ext = kmem_zalloc(length, 641 (flags & SCSI_HBA_CANSLEEP) ? KM_SLEEP : KM_NOSLEEP); 642 if (tran_ext != NULL) { 643 tran->tran_extension = tran_ext; 644 ret = DDI_SUCCESS; 645 } 646 return (ret); 647 } 648 649 void 650 scsi_tran_ext_free( 651 scsi_hba_tran_t *tran, 652 size_t length) 653 { 654 if (tran->tran_extension != NULL) { 655 kmem_free(tran->tran_extension, length); 656 tran->tran_extension = NULL; 657 } 658 } 659 660 /* 661 * Obsolete: Called by an HBA to attach an instance of the driver 662 * Implement this older interface in terms of the new. 663 */ 664 /*ARGSUSED*/ 665 int 666 scsi_hba_attach( 667 dev_info_t *self, 668 ddi_dma_lim_t *hba_lim, 669 scsi_hba_tran_t *tran, 670 int flags, 671 void *hba_options) 672 { 673 ddi_dma_attr_t hba_dma_attr; 674 675 bzero(&hba_dma_attr, sizeof (ddi_dma_attr_t)); 676 677 hba_dma_attr.dma_attr_burstsizes = hba_lim->dlim_burstsizes; 678 hba_dma_attr.dma_attr_minxfer = hba_lim->dlim_minxfer; 679 680 return (scsi_hba_attach_setup(self, &hba_dma_attr, tran, flags)); 681 } 682 683 /* 684 * Called by an HBA to attach an instance of the driver. 685 */ 686 int 687 scsi_hba_attach_setup( 688 dev_info_t *self, 689 ddi_dma_attr_t *hba_dma_attr, 690 scsi_hba_tran_t *tran, 691 int flags) 692 { 693 struct dev_ops *hba_dev_ops; 694 int id; 695 int capable; 696 static const char *interconnect[] = INTERCONNECT_TYPE_ASCII; 697 698 SCSI_HBA_LOG((_LOG(TRACE, NC), self, NULL, "scsi_hba_attach_setup")); 699 700 /* 701 * Verify correct scsi_hba_tran_t form: 702 * o both or none of tran_get_name/tran_get_addr. 703 */ 704 if ((tran->tran_get_name == NULL) ^ 705 (tran->tran_get_bus_addr == NULL)) { 706 SCSI_HBA_LOG((_LOG(WARN, ATTACH_SETUP), self, NULL, 707 "should support both or neither: " 708 "tran_get_name, tran_get_bus_addr")); 709 return (DDI_FAILURE); 710 } 711 712 /* 713 * Save all the important HBA information that must be accessed 714 * later by scsi_hba_bus_ctl(), and scsi_hba_map(). 715 */ 716 tran->tran_hba_dip = self; 717 tran->tran_hba_flags &= SCSI_HBA_TRAN_ALLOC; 718 tran->tran_hba_flags |= (flags & ~SCSI_HBA_TRAN_ALLOC); 719 720 /* 721 * Note: we only need dma_attr_minxfer and dma_attr_burstsizes 722 * from the DMA attributes. scsi_hba_attach(9f) only 723 * guarantees that these two fields are initialized properly. 724 * If this changes, be sure to revisit the implementation 725 * of scsi_hba_attach(9F). 726 */ 727 (void) memcpy(&tran->tran_dma_attr, hba_dma_attr, 728 sizeof (ddi_dma_attr_t)); 729 730 /* create kmem_cache, if needed */ 731 if (tran->tran_setup_pkt) { 732 char tmp[96]; 733 int hbalen; 734 int cmdlen = 0; 735 int statuslen = 0; 736 737 ASSERT(tran->tran_init_pkt == NULL); 738 ASSERT(tran->tran_destroy_pkt == NULL); 739 740 tran->tran_init_pkt = scsi_init_cache_pkt; 741 tran->tran_destroy_pkt = scsi_free_cache_pkt; 742 tran->tran_sync_pkt = scsi_sync_cache_pkt; 743 tran->tran_dmafree = scsi_cache_dmafree; 744 745 hbalen = ROUNDUP(tran->tran_hba_len); 746 if (flags & SCSI_HBA_TRAN_CDB) 747 cmdlen = ROUNDUP(DEFAULT_CDBLEN); 748 if (flags & SCSI_HBA_TRAN_SCB) 749 statuslen = ROUNDUP(DEFAULT_SCBLEN); 750 751 (void) snprintf(tmp, sizeof (tmp), "pkt_cache_%s_%d", 752 ddi_driver_name(self), ddi_get_instance(self)); 753 tran->tran_pkt_cache_ptr = kmem_cache_create(tmp, 754 sizeof (struct scsi_pkt_cache_wrapper) + 755 hbalen + cmdlen + statuslen, 8, 756 scsi_hba_pkt_constructor, scsi_hba_pkt_destructor, 757 NULL, tran, NULL, 0); 758 } 759 760 /* 761 * If the property does not already exist on self then see if we can 762 * pull it from further up the tree and define it on self. If the 763 * property does not exist above (including options.conf) then use the 764 * default value specified (global variable). 765 */ 766 #define CONFIG_INT_PROP(s, p, dv) { \ 767 if ((ddi_prop_exists(DDI_DEV_T_ANY, s, \ 768 DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, p) == 0) && \ 769 (ndi_prop_update_int(DDI_DEV_T_NONE, s, p, \ 770 ddi_prop_get_int(DDI_DEV_T_ANY, ddi_get_parent(s), \ 771 DDI_PROP_NOTPROM, p, dv)) != DDI_PROP_SUCCESS)) \ 772 SCSI_HBA_LOG((_LOG(WARN, ATTACH_SETUP), NULL, s, \ 773 "cannot create property '%s'", p)); \ 774 } 775 776 /* 777 * Attach scsi configuration property parameters not already defined 778 * via driver.conf to this instance of the HBA using global variable 779 * value. Pulling things down from above us to use 780 * "DDI_PROP_NOTPROM | DDI_PROP_DONTPASS" for faster access. 781 */ 782 CONFIG_INT_PROP(self, "scsi-options", scsi_options); 783 CONFIG_INT_PROP(self, "scsi-reset-delay", scsi_reset_delay); 784 CONFIG_INT_PROP(self, "scsi-tag-age-limit", scsi_tag_age_limit); 785 CONFIG_INT_PROP(self, "scsi-watchdog-tick", scsi_watchdog_tick); 786 CONFIG_INT_PROP(self, "scsi-selection-timeout", scsi_selection_timeout); 787 788 /* 789 * cache the scsi-initiator-id as a property defined further up 790 * the tree or defined by OBP on the HBA node so can use 791 * "DDI_PROP_NOTPROM | DDI_PROP_DONTPASS" during enumeration. 792 * We perform the same type of operation that an HBA driver would 793 * use to obtain the 'initiator-id' capability. 794 */ 795 id = ddi_prop_get_int(DDI_DEV_T_ANY, self, 0, "initiator-id", -1); 796 if (id == -1) 797 id = ddi_prop_get_int(DDI_DEV_T_ANY, self, 0, 798 "scsi-initiator-id", -1); 799 if (id != -1) 800 CONFIG_INT_PROP(self, "scsi-initiator-id", id); 801 802 /* Establish 'initiator-interconnect-type' */ 803 if ((tran->tran_hba_flags & SCSI_HBA_TRAN_ALLOC) && 804 (tran->tran_interconnect_type > 0) && 805 (tran->tran_interconnect_type < INTERCONNECT_MAX)) { 806 if (ndi_prop_update_string(DDI_DEV_T_NONE, self, 807 "initiator-interconnect-type", 808 (char *)interconnect[tran->tran_interconnect_type]) 809 != DDI_PROP_SUCCESS) { 810 SCSI_HBA_LOG((_LOG(WARN, ATTACH_SETUP), NULL, self, 811 "failed to establish " 812 "'initiator-interconnect-type'")); 813 return (DDI_FAILURE); 814 } 815 } 816 817 /* SCSA iport driver_private (devi_driver_data) points to tran */ 818 ddi_set_driver_private(self, tran); 819 820 /* 821 * Create :devctl and :scsi minor nodes unless driver supplied its own 822 * open/close entry points 823 */ 824 hba_dev_ops = ddi_get_driver(self); 825 ASSERT(hba_dev_ops != NULL); 826 if (hba_dev_ops == NULL) 827 return (DDI_FAILURE); 828 if (hba_dev_ops->devo_cb_ops->cb_open == scsi_hba_open) { 829 /* 830 * Make sure that instance number doesn't overflow 831 * when forming minor numbers. 832 */ 833 ASSERT(ddi_get_instance(self) <= 834 (L_MAXMIN >> INST_MINOR_SHIFT)); 835 836 if ((ddi_create_minor_node(self, "devctl", S_IFCHR, 837 INST2DEVCTL(ddi_get_instance(self)), 838 DDI_NT_SCSI_NEXUS, 0) != DDI_SUCCESS) || 839 (ddi_create_minor_node(self, "scsi", S_IFCHR, 840 INST2SCSI(ddi_get_instance(self)), 841 DDI_NT_SCSI_ATTACHMENT_POINT, 0) != DDI_SUCCESS)) { 842 ddi_remove_minor_node(self, "devctl"); 843 ddi_remove_minor_node(self, "scsi"); 844 SCSI_HBA_LOG((_LOG(WARN, ATTACH_SETUP), self, NULL, 845 "cannot create devctl/scsi minor nodes")); 846 } 847 } 848 849 /* 850 * NOTE: SCSA maintains an 'fm-capable' domain, in tran_fm_capable, 851 * that is not dependent (limited by) the capabilities of its parents. 852 * For example a dip in a branch that is not DDI_FM_EREPORT_CAPABLE 853 * may report as capable, via tran_fm_capable, to its scsi_device 854 * children. 855 * 856 * Get 'fm-capable' property from driver.conf, if present. If not 857 * present, default to the scsi_fm_capable global (which has 858 * DDI_FM_EREPORT_CAPABLE set by default). 859 */ 860 if (tran->tran_fm_capable == DDI_FM_NOT_CAPABLE) 861 tran->tran_fm_capable = ddi_prop_get_int(DDI_DEV_T_ANY, self, 862 DDI_PROP_NOTPROM | DDI_PROP_DONTPASS, 863 "fm-capable", scsi_fm_capable); 864 865 /* 866 * If an HBA is *not* doing its own fma support by calling 867 * ddi_fm_init() prior to scsi_hba_attach_setup(), we provide a 868 * minimal common SCSA implementation so that scsi_device children 869 * can generate ereports via scsi_fm_ereport_post(). We use 870 * ddi_fm_capable() to detect an HBA calling ddi_fm_init() prior to 871 * scsi_hba_attach_setup(). 872 */ 873 if (tran->tran_fm_capable && 874 (ddi_fm_capable(self) == DDI_FM_NOT_CAPABLE)) { 875 /* 876 * We are capable of something, pass our capabilities up 877 * the tree, but use a local variable so our parent can't 878 * limit our capabilities (we don't want our parent to 879 * clear DDI_FM_EREPORT_CAPABLE). 880 * 881 * NOTE: iblock cookies are not important because scsi 882 * HBAs always interrupt below LOCK_LEVEL. 883 */ 884 capable = tran->tran_fm_capable; 885 ddi_fm_init(self, &capable, NULL); 886 887 /* 888 * Set SCSI_HBA_TRAN_FMSCSA bit to mark us as usiung the 889 * common minimal SCSA fm implementation - we called 890 * ddi_fm_init(), so we are responsible for calling 891 * ddi_fm_fini() in scsi_hba_detach(). 892 * NOTE: if ddi_fm_init fails in any reason, SKIP. 893 */ 894 if (DEVI(self)->devi_fmhdl) 895 tran->tran_hba_flags |= SCSI_HBA_TRAN_FMSCSA; 896 } 897 898 return (DDI_SUCCESS); 899 } 900 901 /* 902 * Called by an HBA to detach an instance of the driver 903 */ 904 int 905 scsi_hba_detach(dev_info_t *self) 906 { 907 struct dev_ops *hba_dev_ops; 908 scsi_hba_tran_t *tran; 909 910 SCSI_HBA_LOG((_LOG(TRACE, NC), self, NULL, "scsi_hba_detach")); 911 912 tran = ddi_get_driver_private(self); 913 ASSERT(tran); 914 if (tran == NULL) 915 return (DDI_FAILURE); 916 ASSERT(tran->tran_open_flag == 0); 917 if (tran->tran_open_flag) 918 return (DDI_FAILURE); 919 920 ddi_set_driver_private(self, NULL); 921 922 /* 923 * If we are taking care of mininal default fma implementation, 924 * call ddi_fm_fini(9F). 925 */ 926 if (tran->tran_hba_flags & SCSI_HBA_TRAN_FMSCSA) { 927 ddi_fm_fini(self); 928 } 929 930 hba_dev_ops = ddi_get_driver(self); 931 ASSERT(hba_dev_ops != NULL); 932 if (hba_dev_ops == NULL) 933 return (DDI_FAILURE); 934 if (hba_dev_ops->devo_cb_ops->cb_open == scsi_hba_open) { 935 ddi_remove_minor_node(self, "devctl"); 936 ddi_remove_minor_node(self, "scsi"); 937 } 938 939 940 /* 941 * XXX - scsi_transport.h states that these data fields should not be 942 * referenced by the HBA. However, to be consistent with 943 * scsi_hba_attach(), they are being reset. 944 */ 945 tran->tran_hba_dip = (dev_info_t *)NULL; 946 tran->tran_hba_flags = 0; 947 (void) memset(&tran->tran_dma_attr, 0, sizeof (ddi_dma_attr_t)); 948 949 if (tran->tran_pkt_cache_ptr != NULL) { 950 kmem_cache_destroy(tran->tran_pkt_cache_ptr); 951 tran->tran_pkt_cache_ptr = NULL; 952 } 953 954 return (DDI_SUCCESS); 955 } 956 957 /* 958 * Called by an HBA from _fini() 959 */ 960 void 961 scsi_hba_fini(struct modlinkage *modlp) 962 { 963 struct dev_ops *hba_dev_ops; 964 965 SCSI_HBA_LOG((_LOG(TRACE, NC), NULL, NULL, "scsi_hba_fini")); 966 967 /* Get the devops structure of this module and clear bus_ops vector. */ 968 hba_dev_ops = ((struct modldrv *)(modlp->ml_linkage[0]))->drv_dev_ops; 969 970 if (hba_dev_ops->devo_cb_ops == &scsi_hba_cbops) 971 hba_dev_ops->devo_cb_ops = NULL; 972 973 if (hba_dev_ops->devo_getinfo == scsi_hba_info) 974 hba_dev_ops->devo_getinfo = NULL; 975 976 hba_dev_ops->devo_bus_ops = (struct bus_ops *)NULL; 977 } 978 979 static int 980 smp_busctl_reportdev(dev_info_t *child) 981 { 982 dev_info_t *self = ddi_get_parent(child); 983 char *smp_wwn; 984 985 if (ddi_prop_lookup_string(DDI_DEV_T_ANY, child, 986 DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, 987 SMP_WWN, &smp_wwn) != DDI_SUCCESS) { 988 return (DDI_FAILURE); 989 } 990 cmn_err(CE_CONT, 991 "?%s%d at %s%d: wwn %s\n", 992 ddi_driver_name(child), ddi_get_instance(child), 993 ddi_driver_name(self), ddi_get_instance(self), 994 smp_wwn); 995 ddi_prop_free(smp_wwn); 996 return (DDI_SUCCESS); 997 } 998 999 static int 1000 smp_busctl_initchild(dev_info_t *child) 1001 { 1002 dev_info_t *self = ddi_get_parent(child); 1003 scsi_hba_tran_t *tran = ddi_get_driver_private(self); 1004 struct smp_device *smp; 1005 char addr[SCSI_MAXNAMELEN]; 1006 dev_info_t *ndip; 1007 char *smp_wwn; 1008 uint64_t wwn; 1009 1010 ASSERT(tran); 1011 if (tran == NULL) 1012 return (DDI_FAILURE); 1013 1014 /* 1015 * Clone transport structure if requested, so the HBA can maintain 1016 * target-specific info, if necessary. 1017 * 1018 * NOTE: when mpt is converted to SCSI_HBA_ADDR_COMPLEX (and 1019 * smp_hba_private is added to struct smp_device) then 1020 * smp support of SCSI_HBA_TRAN_CLONE can be removed (i.e. 1021 * we can ASSERT that drivers with smp children must be 1022 * SCSI_HBA_ADDR_COMPLEX). 1023 */ 1024 if (tran->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { 1025 scsi_hba_tran_t *clone = 1026 kmem_alloc(sizeof (scsi_hba_tran_t), KM_SLEEP); 1027 1028 bcopy(tran, clone, sizeof (scsi_hba_tran_t)); 1029 tran = clone; 1030 } 1031 1032 smp = kmem_zalloc(sizeof (struct smp_device), KM_SLEEP); 1033 smp->dip = child; 1034 smp->smp_addr.a_hba_tran = tran; 1035 1036 if (ddi_prop_lookup_string(DDI_DEV_T_ANY, child, 1037 DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, 1038 SMP_WWN, &smp_wwn) != DDI_SUCCESS) { 1039 return (DDI_FAILURE); 1040 } 1041 1042 if (ddi_devid_str_to_wwn(smp_wwn, &wwn)) { 1043 goto failure; 1044 } 1045 1046 bcopy(&wwn, smp->smp_addr.a_wwn, SAS_WWN_BYTE_SIZE); 1047 (void) snprintf(addr, SCSI_MAXNAMELEN, "w%s", smp_wwn); 1048 1049 /* Prevent duplicate nodes. */ 1050 ndip = ndi_devi_find(self, ddi_node_name(child), addr); 1051 if (ndip && (ndip != child)) { 1052 goto failure; 1053 } 1054 1055 ddi_set_name_addr(child, addr); 1056 ddi_set_driver_private(child, smp); 1057 ddi_prop_free(smp_wwn); 1058 return (DDI_SUCCESS); 1059 1060 failure: 1061 kmem_free(smp, sizeof (struct smp_device)); 1062 if (tran->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { 1063 kmem_free(tran, sizeof (scsi_hba_tran_t)); 1064 } 1065 ddi_prop_free(smp_wwn); 1066 return (DDI_FAILURE); 1067 } 1068 1069 static int 1070 smp_busctl_uninitchild(dev_info_t *child) 1071 { 1072 dev_info_t *self = ddi_get_parent(child); 1073 struct smp_device *smp = ddi_get_driver_private(child); 1074 scsi_hba_tran_t *tran = ddi_get_driver_private(self); 1075 1076 ASSERT(smp && tran); 1077 if ((smp == NULL) || (tran == NULL)) 1078 return (DDI_FAILURE); 1079 1080 if (tran->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { 1081 tran = smp->smp_addr.a_hba_tran; 1082 kmem_free(tran, sizeof (scsi_hba_tran_t)); 1083 } 1084 kmem_free(smp, sizeof (*smp)); 1085 1086 ddi_set_driver_private(child, NULL); 1087 ddi_set_name_addr(child, NULL); 1088 return (DDI_SUCCESS); 1089 } 1090 1091 /* 1092 * Wrapper to scsi_get_name which takes a devinfo argument instead of a 1093 * scsi_device structure. 1094 */ 1095 static int 1096 scsi_hba_name_child(dev_info_t *child, char *addr, int maxlen) 1097 { 1098 struct scsi_device *sd = ddi_get_driver_private(child); 1099 1100 /* nodes are named by tran_get_name or default "tgt,lun" */ 1101 if (sd && (scsi_get_name(sd, addr, maxlen) == 1)) 1102 return (DDI_SUCCESS); 1103 1104 return (DDI_FAILURE); 1105 } 1106 1107 static int 1108 scsi_busctl_reportdev(dev_info_t *child) 1109 { 1110 dev_info_t *self = ddi_get_parent(child); 1111 scsi_hba_tran_t *tran = ddi_get_driver_private(self); 1112 struct scsi_device *sd = ddi_get_driver_private(child); 1113 char ua[SCSI_MAXNAMELEN]; 1114 char ba[SCSI_MAXNAMELEN]; 1115 1116 SCSI_HBA_LOG((_LOG(TRACE, BUS_CTL), NULL, child, 1117 "scsi_hba_bus_ctl REPORTDEV")); 1118 1119 ASSERT(tran && sd); 1120 if ((tran == NULL) || (sd == NULL)) 1121 return (DDI_FAILURE); 1122 1123 /* get the unit_address and bus_addr information */ 1124 if ((scsi_get_name(sd, ua, sizeof (ua)) == 0) || 1125 (scsi_get_bus_addr(sd, ba, sizeof (ba)) == 0)) { 1126 SCSI_HBA_LOG((_LOG(DIAG1, BUS_CTL), 1127 NULL, child, "REPORTDEV failure")); 1128 return (DDI_FAILURE); 1129 } 1130 1131 if (tran->tran_get_name == NULL) 1132 SCSI_HBA_LOG((_LOG(CONT, NC), NULL, NULL, 1133 "?%s%d at %s%d: %s", 1134 ddi_driver_name(child), ddi_get_instance(child), 1135 ddi_driver_name(self), ddi_get_instance(self), ba)); 1136 else 1137 SCSI_HBA_LOG((_LOG(CONT, NC), NULL, NULL, 1138 "?%s%d at %s%d: name %s, bus address %s", 1139 ddi_driver_name(child), ddi_get_instance(child), 1140 ddi_driver_name(self), ddi_get_instance(self), 1141 ua, ba)); 1142 return (DDI_SUCCESS); 1143 } 1144 1145 /* 1146 * scsi_busctl_initchild is called to initialize the SCSA transport for 1147 * communication with a particular child scsi target device. Successful 1148 * initialization requires properties on the node which describe the address 1149 * of the target device. If the address of the target device can't be 1150 * determined from properties then DDI_NOT_WELL_FORMED is returned. Nodes that 1151 * are DDI_NOT_WELL_FORMED are considered an implementation artifact. 1152 * The child may be one of the following types of devinfo nodes: 1153 * 1154 * OBP node: 1155 * OBP does not enumerate target devices attached a SCSI bus. These 1156 * template/stub/wildcard nodes are a legacy artifact for support of old 1157 * driver loading methods. Since they have no properties, 1158 * DDI_NOT_WELL_FORMED will be returned. 1159 * 1160 * SID node: 1161 * The node may be either a: 1162 * o probe/barrier SID node 1163 * o a dynamic SID target node 1164 * o a dynamic SID mscsi node 1165 * 1166 * driver.conf node: The situation for this nexus is different than most. 1167 * Typically a driver.conf node definition is used to either define a 1168 * new child devinfo node or to further decorate (via merge) a SID 1169 * child with properties. In our case we use the nodes for *both* 1170 * purposes. 1171 * 1172 * In both the SID node and driver.conf node cases we must form the nodes 1173 * "@addr" from the well-known scsi(9P) device unit-address properties on 1174 * the node. 1175 * 1176 * For HBA drivers that implement the deprecated tran_get_name interface, 1177 * "@addr" construction involves having that driver interpret properties via 1178 * scsi_hba_name_child -> scsi_get_name -> tran_get_name: there is no 1179 * requiremnt for the property names to be well-known. 1180 */ 1181 static int 1182 scsi_busctl_initchild(dev_info_t *child) 1183 { 1184 dev_info_t *self = ddi_get_parent(child); 1185 dev_info_t *dup; 1186 scsi_hba_tran_t *tran; 1187 struct scsi_device *sd; 1188 scsi_hba_tran_t *tran_clone; 1189 int tgt = 0; 1190 int lun = 0; 1191 int sfunc = 0; 1192 int err = DDI_FAILURE; 1193 char addr[SCSI_MAXNAMELEN]; 1194 1195 ASSERT(DEVI_BUSY_OWNED(self)); 1196 SCSI_HBA_LOG((_LOG(DIAG4, DEVICE_INITCHILD), 1197 NULL, child, "begin initchild")); 1198 1199 /* 1200 * For a driver like fp with multiple upper-layer-protocols 1201 * it is possible for scsi_hba_init in _init to plumb SCSA 1202 * and have the load of fcp (which does scsi_hba_attach_setup) 1203 * to fail. In this case we may get here with a NULL hba. 1204 */ 1205 tran = ddi_get_driver_private(self); 1206 if (tran == NULL) 1207 return (DDI_NOT_WELL_FORMED); 1208 1209 /* 1210 * OBP may create template/stub/wildcard nodes for legacy driver 1211 * loading methods. These nodes have no properties, so we lack the 1212 * addressing properties to initchild them. Hide the node and return 1213 * DDI_NOT_WELL_FORMED. 1214 * 1215 * XXX need ndi_devi_has_properties(dip) type interface? 1216 * 1217 * XXX It would be nice if we could delete these ill formed nodes by 1218 * implementing a DDI_NOT_WELL_FORMED_DELETE return code. This can't 1219 * be done until leadville debug code removes its dependencies 1220 * on the devinfo still being present after a failed ndi_devi_online. 1221 */ 1222 if ((DEVI(child)->devi_hw_prop_ptr == NULL) && 1223 (DEVI(child)->devi_drv_prop_ptr == NULL) && 1224 (DEVI(child)->devi_sys_prop_ptr == NULL)) { 1225 SCSI_HBA_LOG((_LOG(DIAG4, DEVICE_INITCHILD), 1226 NULL, child, "no properties")); 1227 return (DDI_NOT_WELL_FORMED); 1228 } 1229 1230 /* get legacy SPI addressing properties */ 1231 sfunc = ddi_prop_get_int(DDI_DEV_T_ANY, child, 1232 DDI_PROP_NOTPROM | DDI_PROP_DONTPASS, SCSI_ADDR_PROP_SFUNC, -1); 1233 lun = ddi_prop_get_int(DDI_DEV_T_ANY, child, 1234 DDI_PROP_NOTPROM | DDI_PROP_DONTPASS, SCSI_ADDR_PROP_LUN, 0); 1235 if ((tgt = ddi_prop_get_int(DDI_DEV_T_ANY, child, 1236 DDI_PROP_NOTPROM | DDI_PROP_DONTPASS, 1237 SCSI_ADDR_PROP_TARGET, -1)) == -1) { 1238 tgt = 0; 1239 /* 1240 * A driver.conf node for merging always has a target= property, 1241 * even if it is just a dummy that does not contain the real 1242 * target address. However drivers that register devids may 1243 * create stub driver.conf nodes without a target= property so 1244 * that pathological devid resolution works. 1245 */ 1246 if (ndi_dev_is_persistent_node(child) == 0) { 1247 SCSI_HBA_LOG((_LOG(DIAG4, DEVICE_INITCHILD), 1248 NULL, child, "stub driver.conf node")); 1249 return (DDI_NOT_WELL_FORMED); 1250 } 1251 } 1252 1253 /* 1254 * The scsi_address structure may not specify all the addressing 1255 * information. For an old HBA that doesn't support tran_get_name 1256 * (most pre-SCSI-3 HBAs) the scsi_address structure is still used, 1257 * so the target property must exist and the LUN must be < 256. 1258 */ 1259 if ((tran->tran_get_name == NULL) && 1260 ((tgt >= USHRT_MAX) || (lun >= 256))) { 1261 SCSI_HBA_LOG((_LOG(DIAG1, DEVICE_INITCHILD), 1262 NULL, child, "illegal or missing addressing properties")); 1263 return (DDI_NOT_WELL_FORMED); 1264 } 1265 1266 /* 1267 * We need to initialize a fair amount of our environment to invoke 1268 * tran_get_name (via scsi_hba_name_child and scsi_get_name) to 1269 * produce the "@addr" name from addressing properties. Allocate and 1270 * initialize scsi device structure. 1271 */ 1272 sd = kmem_zalloc(sizeof (struct scsi_device), KM_SLEEP); 1273 mutex_init(&sd->sd_mutex, NULL, MUTEX_DRIVER, NULL); 1274 sd->sd_dev = child; 1275 sd->sd_pathinfo = NULL; 1276 ddi_set_driver_private(child, sd); 1277 1278 if (tran->tran_hba_flags & SCSI_HBA_ADDR_COMPLEX) { 1279 /* 1280 * For a SCSI_HBA_ADDR_COMPLEX transport we store a pointer to 1281 * scsi_device in the scsi_address structure. This allows an 1282 * HBA driver to find its per-scsi_device private data 1283 * (accessable to the HBA given just the scsi_address by using 1284 * scsi_address_device(9F)/scsi_device_hba_private_get(9F)). 1285 */ 1286 sd->sd_address.a.a_sd = sd; 1287 tran_clone = NULL; 1288 } else { 1289 /* 1290 * Initialize the scsi_address so that a SCSI-2 target driver 1291 * talking to a SCSI-2 device on a SCSI-3 bus (spi) continues 1292 * to work. We skew the secondary function value so that we 1293 * can tell from the address structure if we are processing 1294 * a secondary function request. 1295 */ 1296 sd->sd_address.a_target = (ushort_t)tgt; 1297 sd->sd_address.a_lun = (uchar_t)lun; 1298 if (sfunc == -1) 1299 sd->sd_address.a_sublun = (uchar_t)0; 1300 else 1301 sd->sd_address.a_sublun = (uchar_t)sfunc + 1; 1302 1303 /* 1304 * XXX TODO: apply target/lun limitation logic for SPI 1305 * binding_set. If spi this is based on scsi_options WIDE 1306 * NLUNS some forms of lun limitation are based on the 1307 * device @lun 0 1308 */ 1309 1310 /* 1311 * Deprecated: Use SCSI_HBA_ADDR_COMPLEX: 1312 * Clone transport structure if requested. Cloning allows 1313 * an HBA to maintain target-specific information if 1314 * necessary, such as target addressing information that 1315 * does not adhere to the scsi_address structure format. 1316 */ 1317 if (tran->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { 1318 tran_clone = kmem_alloc( 1319 sizeof (scsi_hba_tran_t), KM_SLEEP); 1320 bcopy((caddr_t)tran, 1321 (caddr_t)tran_clone, sizeof (scsi_hba_tran_t)); 1322 tran = tran_clone; 1323 tran->tran_sd = sd; 1324 } else { 1325 tran_clone = NULL; 1326 ASSERT(tran->tran_sd == NULL); 1327 } 1328 } 1329 1330 /* establish scsi_address pointer to the HBA's tran structure */ 1331 sd->sd_address.a_hba_tran = tran; 1332 1333 /* 1334 * This is a grotty hack that allows direct-access (non-scsa) drivers 1335 * (like chs, ata, and mlx which all make cmdk children) to put its 1336 * own vector in the 'a_hba_tran' field. When all the drivers that do 1337 * this are fixed, please remove this hack. 1338 * 1339 * NOTE: This hack is also shows up in the DEVP_TO_TRAN implementation 1340 * in scsi_confsubr.c. 1341 */ 1342 sd->sd_tran_safe = tran; 1343 1344 /* Establish the @addr name of the child. */ 1345 *addr = '\0'; 1346 if (scsi_hba_name_child(child, addr, SCSI_MAXNAMELEN) != DDI_SUCCESS) { 1347 /* 1348 * Some driver.conf files add bogus target properties (relative 1349 * to their nexus representation of target) to their stub 1350 * nodes, causing the check above to not filter them. 1351 */ 1352 SCSI_HBA_LOG((_LOG(DIAG3, DEVICE_INITCHILD), 1353 NULL, child, "failed name_child")); 1354 err = DDI_NOT_WELL_FORMED; 1355 goto failure; 1356 } 1357 if (*addr == '\0') { 1358 SCSI_HBA_LOG((_LOG(DIAG2, DEVICE_INITCHILD), 1359 NULL, child, "failed to establish @addr")); 1360 err = DDI_NOT_WELL_FORMED; 1361 goto failure; 1362 } 1363 1364 /* set the node @addr string */ 1365 ddi_set_name_addr(child, addr); 1366 1367 /* prevent sibling duplicates */ 1368 dup = ndi_devi_find(self, ddi_node_name(child), addr); 1369 if (dup && (dup != child)) { 1370 SCSI_HBA_LOG((_LOG(DIAG4, DEVICE_INITCHILD), 1371 NULL, child, "@%s duplicate %p", addr, (void *)dup)); 1372 goto failure; 1373 } 1374 1375 /* call HBA's target init entry point if it exists */ 1376 if (tran->tran_tgt_init != NULL) { 1377 if ((*tran->tran_tgt_init) 1378 (self, child, tran, sd) != DDI_SUCCESS) { 1379 SCSI_HBA_LOG((_LOG(DIAG2, DEVICE_INITCHILD), 1380 NULL, child, "@%s failed tran_tgt_init", addr)); 1381 goto failure; 1382 } 1383 } 1384 1385 SCSI_HBA_LOG((_LOG(DIAG3, DEVICE_INITCHILD), 1386 NULL, child, "@%s ok", addr)); 1387 return (DDI_SUCCESS); 1388 1389 failure: 1390 if (tran_clone) 1391 kmem_free(tran_clone, sizeof (scsi_hba_tran_t)); 1392 mutex_destroy(&sd->sd_mutex); 1393 kmem_free(sd, sizeof (*sd)); 1394 ddi_set_driver_private(child, NULL); 1395 ddi_set_name_addr(child, NULL); 1396 1397 return (err); /* remove the node */ 1398 } 1399 1400 static int 1401 scsi_busctl_uninitchild(dev_info_t *child) 1402 { 1403 dev_info_t *self = ddi_get_parent(child); 1404 scsi_hba_tran_t *tran = ddi_get_driver_private(self); 1405 struct scsi_device *sd = ddi_get_driver_private(child); 1406 scsi_hba_tran_t *tran_clone; 1407 1408 ASSERT(DEVI_BUSY_OWNED(self)); 1409 1410 ASSERT(tran && sd); 1411 if ((tran == NULL) || (sd == NULL)) 1412 return (DDI_FAILURE); 1413 1414 SCSI_HBA_LOG((_LOG(DIAG3, DEVICE_UNINITCHILD), 1415 NULL, child, "uninitchild %d %s@%s", i_ddi_node_state(child), 1416 ddi_node_name(child), 1417 ddi_get_name_addr(child) ? ddi_get_name_addr(child) : "XXX")); 1418 1419 if (tran->tran_hba_flags & SCSI_HBA_TRAN_CLONE) { 1420 tran_clone = sd->sd_address.a_hba_tran; 1421 1422 /* ... grotty hack, involving sd_tran_safe, continued. */ 1423 if (tran_clone != sd->sd_tran_safe) { 1424 tran_clone = sd->sd_tran_safe; 1425 #ifdef DEBUG 1426 /* 1427 * Complain so things get fixed and hack can, at 1428 * some point in time, be removed. 1429 */ 1430 cmn_err(CE_WARN, "scsi_busctl_uninitchild: '%s' is " 1431 "corrupting a_hba_tran", 1432 sd->sd_dev ? ddi_driver_name(sd->sd_dev) : 1433 "unknown_driver"); 1434 #endif /* DEBUG */ 1435 } 1436 1437 ASSERT(tran_clone->tran_hba_flags & SCSI_HBA_TRAN_CLONE); 1438 ASSERT(tran_clone->tran_sd == sd); 1439 tran = tran_clone; 1440 } else { 1441 tran_clone = NULL; 1442 ASSERT(tran->tran_sd == NULL); 1443 } 1444 1445 /* 1446 * To simplify host adapter drivers we guarantee that multiple 1447 * tran_tgt_init(9E) calls of the same unit address are never 1448 * active at the same time. 1449 */ 1450 if (tran->tran_tgt_free) 1451 (*tran->tran_tgt_free) (self, child, tran, sd); 1452 1453 /* 1454 * If a inquiry data is still allocated (by scsi_probe()) we 1455 * free the allocation here. This keeps scsi_inq valid for the 1456 * same duration as the corresponding inquiry properties. It 1457 * also allows a tran_tgt_init() implementation that establishes 1458 * sd_inq (common/io/dktp/controller/ata/ata_disk.c) to deal 1459 * with deallocation in its tran_tgt_free (setting sd_inq back 1460 * to NULL) without upsetting the framework. 1461 */ 1462 if (sd->sd_inq) { 1463 kmem_free(sd->sd_inq, SUN_INQSIZE); 1464 sd->sd_inq = (struct scsi_inquiry *)NULL; 1465 } 1466 1467 mutex_destroy(&sd->sd_mutex); 1468 if (tran_clone) 1469 kmem_free(tran_clone, sizeof (scsi_hba_tran_t)); 1470 kmem_free(sd, sizeof (*sd)); 1471 1472 ddi_set_driver_private(child, NULL); 1473 SCSI_HBA_LOG((_LOG(DIAG3, DEVICE_UNINITCHILD), 1474 NULL, child, "complete")); 1475 ddi_set_name_addr(child, NULL); 1476 return (DDI_SUCCESS); 1477 } 1478 1479 /* 1480 * Generic bus_ctl operations for SCSI HBA's, 1481 * hiding the busctl interface from the HBA. 1482 */ 1483 /*ARGSUSED*/ 1484 static int 1485 scsi_hba_bus_ctl( 1486 dev_info_t *self, 1487 dev_info_t *child, 1488 ddi_ctl_enum_t op, 1489 void *arg, 1490 void *result) 1491 { 1492 int child_flavor_smp = 0; 1493 int val; 1494 ddi_dma_attr_t *attr; 1495 scsi_hba_tran_t *tran; 1496 1497 /* For some ops, child is 'arg'. */ 1498 if ((op == DDI_CTLOPS_INITCHILD) || (op == DDI_CTLOPS_UNINITCHILD)) 1499 child = (dev_info_t *)arg; 1500 1501 /* Determine the flavor of the child: smp .vs. scsi */ 1502 if (ddi_prop_exists(DDI_DEV_T_ANY, child, 1503 DDI_PROP_DONTPASS | DDI_PROP_NOTPROM, SMP_PROP)) 1504 child_flavor_smp = 1; 1505 1506 switch (op) { 1507 case DDI_CTLOPS_INITCHILD: 1508 if (child_flavor_smp) 1509 return (smp_busctl_initchild(child)); 1510 else 1511 return (scsi_busctl_initchild(child)); 1512 1513 case DDI_CTLOPS_UNINITCHILD: 1514 if (child_flavor_smp) 1515 return (smp_busctl_uninitchild(child)); 1516 else 1517 return (scsi_busctl_uninitchild(child)); 1518 1519 case DDI_CTLOPS_REPORTDEV: 1520 if (child_flavor_smp) 1521 return (smp_busctl_reportdev(child)); 1522 else 1523 return (scsi_busctl_reportdev(child)); 1524 1525 case DDI_CTLOPS_IOMIN: 1526 tran = ddi_get_driver_private(self); 1527 ASSERT(tran); 1528 if (tran == NULL) 1529 return (DDI_FAILURE); 1530 1531 /* 1532 * The 'arg' value of nonzero indicates 'streaming' 1533 * mode. If in streaming mode, pick the largest 1534 * of our burstsizes available and say that that 1535 * is our minimum value (modulo what minxfer is). 1536 */ 1537 attr = &tran->tran_dma_attr; 1538 val = *((int *)result); 1539 val = maxbit(val, attr->dma_attr_minxfer); 1540 *((int *)result) = maxbit(val, ((intptr_t)arg ? 1541 (1<<ddi_ffs(attr->dma_attr_burstsizes)-1) : 1542 (1<<(ddi_fls(attr->dma_attr_burstsizes)-1)))); 1543 1544 return (ddi_ctlops(self, child, op, arg, result)); 1545 1546 case DDI_CTLOPS_SIDDEV: 1547 return (ndi_dev_is_persistent_node(child) ? 1548 DDI_SUCCESS : DDI_FAILURE); 1549 1550 /* XXX these should be handled */ 1551 case DDI_CTLOPS_POWER: 1552 case DDI_CTLOPS_ATTACH: /* DDI_PRE / DDI_POST attach */ 1553 case DDI_CTLOPS_DETACH: /* DDI_PRE / DDI_POST detach */ 1554 return (DDI_SUCCESS); 1555 1556 /* 1557 * These ops correspond to functions that "shouldn't" be called 1558 * by a SCSI target driver. So we whine when we're called. 1559 */ 1560 case DDI_CTLOPS_DMAPMAPC: 1561 case DDI_CTLOPS_REPORTINT: 1562 case DDI_CTLOPS_REGSIZE: 1563 case DDI_CTLOPS_NREGS: 1564 case DDI_CTLOPS_SLAVEONLY: 1565 case DDI_CTLOPS_AFFINITY: 1566 case DDI_CTLOPS_POKE: 1567 case DDI_CTLOPS_PEEK: 1568 SCSI_HBA_LOG((_LOG(WARN, BUS_CTL), NULL, child, 1569 "invalid op (%d)", op)); 1570 return (DDI_FAILURE); 1571 1572 /* Everything else we pass up */ 1573 case DDI_CTLOPS_PTOB: 1574 case DDI_CTLOPS_BTOP: 1575 case DDI_CTLOPS_BTOPR: 1576 case DDI_CTLOPS_DVMAPAGESIZE: 1577 default: 1578 return (ddi_ctlops(self, child, op, arg, result)); 1579 } 1580 } 1581 1582 /* 1583 * Private wrapper for scsi_pkt's allocated via scsi_hba_pkt_alloc() 1584 */ 1585 struct scsi_pkt_wrapper { 1586 struct scsi_pkt scsi_pkt; 1587 int pkt_wrapper_magic; 1588 int pkt_wrapper_len; 1589 }; 1590 1591 #if !defined(lint) 1592 _NOTE(SCHEME_PROTECTS_DATA("unique per thread", scsi_pkt_wrapper)) 1593 _NOTE(SCHEME_PROTECTS_DATA("Unshared Data", dev_ops)) 1594 #endif 1595 1596 /* 1597 * Called by an HBA to allocate a scsi_pkt 1598 */ 1599 /*ARGSUSED*/ 1600 struct scsi_pkt * 1601 scsi_hba_pkt_alloc( 1602 dev_info_t *dip, 1603 struct scsi_address *ap, 1604 int cmdlen, 1605 int statuslen, 1606 int tgtlen, 1607 int hbalen, 1608 int (*callback)(caddr_t arg), 1609 caddr_t arg) 1610 { 1611 struct scsi_pkt *pkt; 1612 struct scsi_pkt_wrapper *hba_pkt; 1613 caddr_t p; 1614 int acmdlen, astatuslen, atgtlen, ahbalen; 1615 int pktlen; 1616 1617 /* Sanity check */ 1618 if (callback != SLEEP_FUNC && callback != NULL_FUNC) 1619 SCSI_HBA_LOG((_LOG(WARN, PKT_ALLOC), dip, NULL, 1620 "callback must be either SLEEP_FUNC or NULL_FUNC")); 1621 1622 /* 1623 * Round up so everything gets allocated on long-word boundaries 1624 */ 1625 acmdlen = ROUNDUP(cmdlen); 1626 astatuslen = ROUNDUP(statuslen); 1627 atgtlen = ROUNDUP(tgtlen); 1628 ahbalen = ROUNDUP(hbalen); 1629 pktlen = sizeof (struct scsi_pkt_wrapper) + 1630 acmdlen + astatuslen + atgtlen + ahbalen; 1631 1632 hba_pkt = kmem_zalloc(pktlen, 1633 (callback == SLEEP_FUNC) ? KM_SLEEP : KM_NOSLEEP); 1634 if (hba_pkt == NULL) { 1635 ASSERT(callback == NULL_FUNC); 1636 return (NULL); 1637 } 1638 1639 /* 1640 * Set up our private info on this pkt 1641 */ 1642 hba_pkt->pkt_wrapper_len = pktlen; 1643 hba_pkt->pkt_wrapper_magic = PKT_WRAPPER_MAGIC; /* alloced correctly */ 1644 pkt = &hba_pkt->scsi_pkt; 1645 1646 /* 1647 * Set up pointers to private data areas, cdb, and status. 1648 */ 1649 p = (caddr_t)(hba_pkt + 1); 1650 if (hbalen > 0) { 1651 pkt->pkt_ha_private = (opaque_t)p; 1652 p += ahbalen; 1653 } 1654 if (tgtlen > 0) { 1655 pkt->pkt_private = (opaque_t)p; 1656 p += atgtlen; 1657 } 1658 if (statuslen > 0) { 1659 pkt->pkt_scbp = (uchar_t *)p; 1660 p += astatuslen; 1661 } 1662 if (cmdlen > 0) { 1663 pkt->pkt_cdbp = (uchar_t *)p; 1664 } 1665 1666 /* 1667 * Initialize the pkt's scsi_address 1668 */ 1669 pkt->pkt_address = *ap; 1670 1671 /* 1672 * NB: It may not be safe for drivers, esp target drivers, to depend 1673 * on the following fields being set until all the scsi_pkt 1674 * allocation violations discussed in scsi_pkt.h are all resolved. 1675 */ 1676 pkt->pkt_cdblen = cmdlen; 1677 pkt->pkt_tgtlen = tgtlen; 1678 pkt->pkt_scblen = statuslen; 1679 1680 return (pkt); 1681 } 1682 1683 /* 1684 * Called by an HBA to free a scsi_pkt 1685 */ 1686 /*ARGSUSED*/ 1687 void 1688 scsi_hba_pkt_free( 1689 struct scsi_address *ap, 1690 struct scsi_pkt *pkt) 1691 { 1692 kmem_free(pkt, ((struct scsi_pkt_wrapper *)pkt)->pkt_wrapper_len); 1693 } 1694 1695 /* 1696 * Return 1 if the scsi_pkt used a proper allocator. 1697 * 1698 * The DDI does not allow a driver to allocate it's own scsi_pkt(9S), a 1699 * driver should not have *any* compiled in dependencies on "sizeof (struct 1700 * scsi_pkt)". While this has been the case for many years, a number of 1701 * drivers have still not been fixed. This function can be used to detect 1702 * improperly allocated scsi_pkt structures, and produce messages identifying 1703 * drivers that need to be fixed. 1704 * 1705 * While drivers in violation are being fixed, this function can also 1706 * be used by the framework to detect packets that violated allocation 1707 * rules. 1708 * 1709 * NB: It is possible, but very unlikely, for this code to return a false 1710 * positive (finding correct magic, but for wrong reasons). Careful 1711 * consideration is needed for callers using this interface to condition 1712 * access to newer scsi_pkt fields (those after pkt_reason). 1713 * 1714 * NB: As an aid to minimizing the amount of work involved in 'fixing' legacy 1715 * drivers that violate scsi_*(9S) allocation rules, private 1716 * scsi_pkt_size()/scsi_size_clean() functions are available (see their 1717 * implementation for details). 1718 * 1719 * *** Non-legacy use of scsi_pkt_size() is discouraged. *** 1720 * 1721 * NB: When supporting broken HBA drivers is not longer a concern, this 1722 * code should be removed. 1723 */ 1724 int 1725 scsi_pkt_allocated_correctly(struct scsi_pkt *pkt) 1726 { 1727 struct scsi_pkt_wrapper *hba_pkt = (struct scsi_pkt_wrapper *)pkt; 1728 int magic; 1729 major_t major; 1730 #ifdef DEBUG 1731 int *pspwm, *pspcwm; 1732 1733 /* 1734 * We are getting scsi packets from two 'correct' wrapper schemes, 1735 * make sure we are looking at the same place in both to detect 1736 * proper allocation. 1737 */ 1738 pspwm = &((struct scsi_pkt_wrapper *)0)->pkt_wrapper_magic; 1739 pspcwm = &((struct scsi_pkt_cache_wrapper *)0)->pcw_magic; 1740 ASSERT(pspwm == pspcwm); 1741 #endif /* DEBUG */ 1742 1743 1744 /* 1745 * Check to see if driver is scsi_size_clean(), assume it 1746 * is using the scsi_pkt_size() interface everywhere it needs to 1747 * if the driver indicates it is scsi_size_clean(). 1748 */ 1749 major = ddi_driver_major(P_TO_TRAN(pkt)->tran_hba_dip); 1750 if (devnamesp[major].dn_flags & DN_SCSI_SIZE_CLEAN) 1751 return (1); /* ok */ 1752 1753 /* 1754 * Special case crossing a page boundary. If the scsi_pkt was not 1755 * allocated correctly, then accross a page boundary we have a 1756 * fault hazzard. 1757 */ 1758 if ((((uintptr_t)(&hba_pkt->scsi_pkt)) & MMU_PAGEMASK) == 1759 (((uintptr_t)(&hba_pkt->pkt_wrapper_magic)) & MMU_PAGEMASK)) { 1760 /* fastpath, no cross-page hazzard */ 1761 magic = hba_pkt->pkt_wrapper_magic; 1762 } else { 1763 /* add protection for cross-page hazzard */ 1764 if (ddi_peek32((dev_info_t *)NULL, 1765 &hba_pkt->pkt_wrapper_magic, &magic) == DDI_FAILURE) { 1766 return (0); /* violation */ 1767 } 1768 } 1769 1770 /* properly allocated packet always has correct magic */ 1771 return ((magic == PKT_WRAPPER_MAGIC) ? 1 : 0); 1772 } 1773 1774 /* 1775 * Private interfaces to simplify conversion of legacy drivers so they don't 1776 * depend on scsi_*(9S) size. Instead of using these private interface, HBA 1777 * drivers should use DDI sanctioned allocation methods: 1778 * 1779 * scsi_pkt Use scsi_hba_pkt_alloc(9F), or implement 1780 * tran_setup_pkt(9E). 1781 * 1782 * scsi_device You are doing something strange/special, a scsi_device 1783 * structure should only be allocated by scsi_hba.c 1784 * initchild code or scsi_vhci.c code. 1785 * 1786 * scsi_hba_tran Use scsi_hba_tran_alloc(9F). 1787 */ 1788 size_t 1789 scsi_pkt_size() 1790 { 1791 return (sizeof (struct scsi_pkt)); 1792 } 1793 1794 size_t 1795 scsi_hba_tran_size() 1796 { 1797 return (sizeof (scsi_hba_tran_t)); 1798 } 1799 1800 size_t 1801 scsi_device_size() 1802 { 1803 return (sizeof (struct scsi_device)); 1804 } 1805 1806 /* 1807 * Legacy compliance to scsi_pkt(9S) allocation rules through use of 1808 * scsi_pkt_size() is detected by the 'scsi-size-clean' driver.conf property 1809 * or an HBA driver calling to scsi_size_clean() from attach(9E). A driver 1810 * developer should only indicate that a legacy driver is clean after using 1811 * SCSI_SIZE_CLEAN_VERIFY to ensure compliance (see scsi_pkt.h). 1812 */ 1813 void 1814 scsi_size_clean(dev_info_t *dip) 1815 { 1816 major_t major; 1817 struct devnames *dnp; 1818 1819 ASSERT(dip); 1820 major = ddi_driver_major(dip); 1821 ASSERT(major < devcnt); 1822 if (major >= devcnt) { 1823 cmn_err(CE_WARN, "scsi_pkt_size: bogus major: %d", major); 1824 return; 1825 } 1826 1827 /* Set DN_SCSI_SIZE_CLEAN flag in dn_flags. */ 1828 dnp = &devnamesp[major]; 1829 if ((dnp->dn_flags & DN_SCSI_SIZE_CLEAN) == 0) { 1830 LOCK_DEV_OPS(&dnp->dn_lock); 1831 dnp->dn_flags |= DN_SCSI_SIZE_CLEAN; 1832 UNLOCK_DEV_OPS(&dnp->dn_lock); 1833 } 1834 } 1835 1836 1837 /* 1838 * Called by an HBA to map strings to capability indices 1839 */ 1840 int 1841 scsi_hba_lookup_capstr( 1842 char *capstr) 1843 { 1844 /* 1845 * Capability strings: only add entries to mask the legacy 1846 * '_' vs. '-' misery. All new capabilities should use '-', 1847 * and be captured be added to SCSI_CAP_ASCII. 1848 */ 1849 static struct cap_strings { 1850 char *cap_string; 1851 int cap_index; 1852 } cap_strings[] = { 1853 { "dma_max", SCSI_CAP_DMA_MAX }, 1854 { "msg_out", SCSI_CAP_MSG_OUT }, 1855 { "wide_xfer", SCSI_CAP_WIDE_XFER }, 1856 { NULL, 0 } 1857 }; 1858 static char *cap_ascii[] = SCSI_CAP_ASCII; 1859 char **cap; 1860 int i; 1861 struct cap_strings *cp; 1862 1863 for (cap = cap_ascii, i = 0; *cap != NULL; cap++, i++) 1864 if (strcmp(*cap, capstr) == 0) 1865 return (i); 1866 1867 for (cp = cap_strings; cp->cap_string != NULL; cp++) 1868 if (strcmp(cp->cap_string, capstr) == 0) 1869 return (cp->cap_index); 1870 1871 return (-1); 1872 } 1873 1874 /* 1875 * Called by an HBA to determine if the system is in 'panic' state. 1876 */ 1877 int 1878 scsi_hba_in_panic() 1879 { 1880 return (panicstr != NULL); 1881 } 1882 1883 /* 1884 * If a SCSI target driver attempts to mmap memory, 1885 * the buck stops here. 1886 */ 1887 /*ARGSUSED*/ 1888 static int 1889 scsi_hba_map_fault( 1890 dev_info_t *dip, 1891 dev_info_t *child, 1892 struct hat *hat, 1893 struct seg *seg, 1894 caddr_t addr, 1895 struct devpage *dp, 1896 pfn_t pfn, 1897 uint_t prot, 1898 uint_t lock) 1899 { 1900 return (DDI_FAILURE); 1901 } 1902 1903 static int 1904 scsi_hba_get_eventcookie( 1905 dev_info_t *self, 1906 dev_info_t *child, 1907 char *name, 1908 ddi_eventcookie_t *eventp) 1909 { 1910 scsi_hba_tran_t *tran; 1911 1912 tran = ddi_get_driver_private(self); 1913 if (tran->tran_get_eventcookie && 1914 ((*tran->tran_get_eventcookie)(self, 1915 child, name, eventp) == DDI_SUCCESS)) { 1916 return (DDI_SUCCESS); 1917 } 1918 1919 return (ndi_busop_get_eventcookie(self, child, name, eventp)); 1920 } 1921 1922 static int 1923 scsi_hba_add_eventcall( 1924 dev_info_t *self, 1925 dev_info_t *child, 1926 ddi_eventcookie_t event, 1927 void (*callback)( 1928 dev_info_t *self, 1929 ddi_eventcookie_t event, 1930 void *arg, 1931 void *bus_impldata), 1932 void *arg, 1933 ddi_callback_id_t *cb_id) 1934 { 1935 scsi_hba_tran_t *tran; 1936 1937 tran = ddi_get_driver_private(self); 1938 if (tran->tran_add_eventcall && 1939 ((*tran->tran_add_eventcall)(self, child, 1940 event, callback, arg, cb_id) == DDI_SUCCESS)) { 1941 return (DDI_SUCCESS); 1942 } 1943 1944 return (DDI_FAILURE); 1945 } 1946 1947 static int 1948 scsi_hba_remove_eventcall(dev_info_t *self, ddi_callback_id_t cb_id) 1949 { 1950 scsi_hba_tran_t *tran; 1951 ASSERT(cb_id); 1952 1953 tran = ddi_get_driver_private(self); 1954 if (tran->tran_remove_eventcall && 1955 ((*tran->tran_remove_eventcall)( 1956 self, cb_id) == DDI_SUCCESS)) { 1957 return (DDI_SUCCESS); 1958 } 1959 1960 return (DDI_FAILURE); 1961 } 1962 1963 static int 1964 scsi_hba_post_event( 1965 dev_info_t *self, 1966 dev_info_t *child, 1967 ddi_eventcookie_t event, 1968 void *bus_impldata) 1969 { 1970 scsi_hba_tran_t *tran; 1971 1972 tran = ddi_get_driver_private(self); 1973 if (tran->tran_post_event && 1974 ((*tran->tran_post_event)(self, 1975 child, event, bus_impldata) == DDI_SUCCESS)) { 1976 return (DDI_SUCCESS); 1977 } 1978 1979 return (DDI_FAILURE); 1980 } 1981 1982 /* 1983 * Default getinfo(9e) for scsi_hba 1984 */ 1985 /* ARGSUSED */ 1986 static int 1987 scsi_hba_info(dev_info_t *self, ddi_info_cmd_t infocmd, void *arg, 1988 void **result) 1989 { 1990 int error = DDI_SUCCESS; 1991 1992 switch (infocmd) { 1993 case DDI_INFO_DEVT2INSTANCE: 1994 *result = (void *)(intptr_t)(MINOR2INST(getminor((dev_t)arg))); 1995 break; 1996 default: 1997 error = DDI_FAILURE; 1998 } 1999 return (error); 2000 } 2001 2002 /* 2003 * Default open and close routine for scsi_hba 2004 */ 2005 /* ARGSUSED */ 2006 int 2007 scsi_hba_open(dev_t *devp, int flags, int otyp, cred_t *credp) 2008 { 2009 dev_info_t *self; 2010 scsi_hba_tran_t *tran; 2011 int rv = 0; 2012 2013 if (otyp != OTYP_CHR) 2014 return (EINVAL); 2015 2016 if ((self = e_ddi_hold_devi_by_dev(*devp, 0)) == NULL) 2017 return (ENXIO); 2018 2019 tran = ddi_get_driver_private(self); 2020 if (tran == NULL) { 2021 ddi_release_devi(self); 2022 return (ENXIO); 2023 } 2024 2025 /* 2026 * tran_open_flag bit field: 2027 * 0: closed 2028 * 1: shared open by minor at bit position 2029 * 1 at 31st bit: exclusive open 2030 */ 2031 mutex_enter(&(tran->tran_open_lock)); 2032 if (flags & FEXCL) { 2033 if (tran->tran_open_flag != 0) { 2034 rv = EBUSY; /* already open */ 2035 } else { 2036 tran->tran_open_flag = TRAN_OPEN_EXCL; 2037 } 2038 } else { 2039 if (tran->tran_open_flag == TRAN_OPEN_EXCL) { 2040 rv = EBUSY; /* already excl. open */ 2041 } else { 2042 int minor = getminor(*devp) & TRAN_MINOR_MASK; 2043 tran->tran_open_flag |= (1 << minor); 2044 /* 2045 * Ensure that the last framework reserved minor 2046 * is unused. Otherwise, the exclusive open 2047 * mechanism may break. 2048 */ 2049 ASSERT(minor != 31); 2050 } 2051 } 2052 mutex_exit(&(tran->tran_open_lock)); 2053 2054 ddi_release_devi(self); 2055 return (rv); 2056 } 2057 2058 /* ARGSUSED */ 2059 int 2060 scsi_hba_close(dev_t dev, int flag, int otyp, cred_t *credp) 2061 { 2062 dev_info_t *self; 2063 scsi_hba_tran_t *tran; 2064 2065 if (otyp != OTYP_CHR) 2066 return (EINVAL); 2067 2068 if ((self = e_ddi_hold_devi_by_dev(dev, 0)) == NULL) 2069 return (ENXIO); 2070 2071 tran = ddi_get_driver_private(self); 2072 if (tran == NULL) { 2073 ddi_release_devi(self); 2074 return (ENXIO); 2075 } 2076 2077 mutex_enter(&(tran->tran_open_lock)); 2078 if (tran->tran_open_flag == TRAN_OPEN_EXCL) { 2079 tran->tran_open_flag = 0; 2080 } else { 2081 int minor = getminor(dev) & TRAN_MINOR_MASK; 2082 tran->tran_open_flag &= ~(1 << minor); 2083 } 2084 mutex_exit(&(tran->tran_open_lock)); 2085 2086 ddi_release_devi(self); 2087 return (0); 2088 } 2089 2090 /* 2091 * standard ioctl commands for SCSI hotplugging 2092 */ 2093 /* ARGSUSED */ 2094 int 2095 scsi_hba_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *credp, 2096 int *rvalp) 2097 { 2098 dev_info_t *self; 2099 struct devctl_iocdata *dcp = NULL; 2100 dev_info_t *child = NULL; 2101 struct scsi_device *sd; 2102 scsi_hba_tran_t *tran; 2103 uint_t bus_state; 2104 int rv = 0; 2105 int circ; 2106 2107 if ((self = e_ddi_hold_devi_by_dev(dev, 0)) == NULL) { 2108 rv = ENXIO; 2109 goto out; 2110 } 2111 2112 if ((tran = ddi_get_driver_private(self)) == NULL) { 2113 rv = ENXIO; 2114 goto out; 2115 } 2116 2117 /* Ioctls for which the generic implementation suffices. */ 2118 switch (cmd) { 2119 case DEVCTL_DEVICE_GETSTATE: 2120 case DEVCTL_DEVICE_ONLINE: 2121 case DEVCTL_DEVICE_OFFLINE: 2122 case DEVCTL_DEVICE_REMOVE: 2123 case DEVCTL_BUS_GETSTATE: 2124 rv = ndi_devctl_ioctl(self, cmd, arg, mode, 0); 2125 goto out; 2126 } 2127 2128 /* read devctl ioctl data */ 2129 if (ndi_dc_allochdl((void *)arg, &dcp) != NDI_SUCCESS) { 2130 rv = EFAULT; 2131 goto out; 2132 } 2133 2134 /* Ioctls that require child identification */ 2135 switch (cmd) { 2136 case DEVCTL_DEVICE_RESET: 2137 /* child identification from unit-address */ 2138 if (ndi_dc_getname(dcp) == NULL || 2139 ndi_dc_getaddr(dcp) == NULL) { 2140 rv = EINVAL; 2141 goto out; 2142 } 2143 2144 ndi_devi_enter(self, &circ); 2145 child = ndi_devi_find(self, 2146 ndi_dc_getname(dcp), ndi_dc_getaddr(dcp)); 2147 if (child == NULL) { 2148 ndi_devi_exit(self, circ); 2149 rv = ENXIO; 2150 goto out; 2151 } 2152 ndi_hold_devi(child); 2153 ndi_devi_exit(self, circ); 2154 break; 2155 2156 case DEVCTL_BUS_RESETALL: 2157 /* 2158 * Find a child's scsi_address so we can invoke tran_reset 2159 * below. 2160 * 2161 * XXX If no child exists, one may to able to fake a child. 2162 * This will be a enhancement for the future. 2163 * For now, we fall back to BUS_RESET. 2164 * XXX We sould be looking at node state to get one 2165 * that is initialized... 2166 */ 2167 ndi_devi_enter(self, &circ); 2168 child = ddi_get_child(self); 2169 sd = NULL; 2170 while (child) { 2171 /* XXX verify scsi_device 'flavor' of child */ 2172 if ((sd = ddi_get_driver_private(child)) != NULL) { 2173 ndi_hold_devi(child); 2174 break; 2175 } 2176 child = ddi_get_next_sibling(child); 2177 } 2178 ndi_devi_exit(self, circ); 2179 break; 2180 } 2181 2182 switch (cmd) { 2183 case DEVCTL_DEVICE_RESET: 2184 ASSERT(child); 2185 if (tran->tran_reset == NULL) 2186 rv = ENOTSUP; 2187 else { 2188 sd = ddi_get_driver_private(child); 2189 /* XXX verify scsi_device 'flavor' of child */ 2190 if ((sd == NULL) || 2191 (tran->tran_reset(&sd->sd_address, 2192 RESET_TARGET) != 1)) 2193 rv = EIO; 2194 } 2195 break; 2196 2197 case DEVCTL_BUS_QUIESCE: 2198 if ((ndi_get_bus_state(self, &bus_state) == NDI_SUCCESS) && 2199 (bus_state == BUS_QUIESCED)) 2200 rv = EALREADY; 2201 else if (tran->tran_quiesce == NULL) 2202 rv = ENOTSUP; 2203 else if ((*tran->tran_quiesce)(self) != 0) 2204 rv = EIO; 2205 else 2206 (void) ndi_set_bus_state(self, BUS_QUIESCED); 2207 break; 2208 2209 case DEVCTL_BUS_UNQUIESCE: 2210 if ((ndi_get_bus_state(self, &bus_state) == NDI_SUCCESS) && 2211 (bus_state == BUS_ACTIVE)) 2212 rv = EALREADY; 2213 else if (tran->tran_unquiesce == NULL) 2214 rv = ENOTSUP; 2215 else if ((*tran->tran_unquiesce)(self) != 0) 2216 rv = EIO; 2217 else 2218 (void) ndi_set_bus_state(self, BUS_ACTIVE); 2219 break; 2220 2221 case DEVCTL_BUS_RESET: 2222 if (tran->tran_bus_reset == NULL) 2223 rv = ENOTSUP; 2224 else if ((*tran->tran_bus_reset)(self, RESET_BUS) != 1) 2225 rv = EIO; 2226 break; 2227 2228 case DEVCTL_BUS_RESETALL: 2229 if (tran->tran_reset == NULL) { 2230 rv = ENOTSUP; 2231 } else { 2232 if (sd) { 2233 if ((*tran->tran_reset) 2234 (&sd->sd_address, RESET_ALL) != 1) 2235 rv = EIO; 2236 } else { 2237 if ((tran->tran_bus_reset == NULL) || 2238 ((*tran->tran_bus_reset) 2239 (self, RESET_BUS) != 1)) 2240 rv = EIO; 2241 } 2242 } 2243 break; 2244 2245 case DEVCTL_BUS_CONFIGURE: 2246 if (ndi_devi_config(self, NDI_DEVFS_CLEAN| 2247 NDI_DEVI_PERSIST|NDI_CONFIG_REPROBE) != NDI_SUCCESS) { 2248 rv = EIO; 2249 } 2250 break; 2251 2252 case DEVCTL_BUS_UNCONFIGURE: 2253 if (ndi_devi_unconfig(self, 2254 NDI_DEVI_REMOVE|NDI_DEVFS_CLEAN) != NDI_SUCCESS) { 2255 rv = EBUSY; 2256 } 2257 break; 2258 2259 default: 2260 rv = ENOTTY; 2261 } 2262 2263 out: if (child) 2264 ndi_rele_devi(child); 2265 if (dcp) 2266 ndi_dc_freehdl(dcp); 2267 if (self) 2268 ddi_release_devi(self); 2269 return (rv); 2270 } 2271 2272 /*ARGSUSED*/ 2273 static int 2274 scsi_hba_fm_init_child(dev_info_t *self, dev_info_t *child, int cap, 2275 ddi_iblock_cookie_t *ibc) 2276 { 2277 scsi_hba_tran_t *tran = ddi_get_driver_private(self); 2278 2279 return (tran ? tran->tran_fm_capable : scsi_fm_capable); 2280 } 2281 2282 static int 2283 scsi_hba_bus_power(dev_info_t *self, void *impl_arg, pm_bus_power_op_t op, 2284 void *arg, void *result) 2285 { 2286 scsi_hba_tran_t *tran; 2287 2288 tran = ddi_get_driver_private(self); 2289 if (tran && tran->tran_bus_power) { 2290 return (tran->tran_bus_power(self, impl_arg, 2291 op, arg, result)); 2292 } 2293 2294 return (pm_busop_bus_power(self, impl_arg, op, arg, result)); 2295 } 2296 2297 /* 2298 * Convert between normalized (SCSI-3) LUN format, as described by 2299 * scsi_lun_t, and a normalized lun64_t representation. The normalized 2300 * representation maps in a compatible way to SCSI-2 LUNs. 2301 * 2302 * SCSI-3 LUNs are 64 bits. SCSI-2 LUNs are 3 bits (up to 5 bits in 2303 * some non-compliant implementations). SCSI-3 will pass a (64-bit) 2304 * scsi_lun_t, but we need a representation from which we can for example, 2305 * make device names. For compatibility we represent 64-bit LUN numbers 2306 * in such a way that they appear like they would have under SCSI-2. 2307 * This means that the single level LUN number is in the lowest byte with 2308 * the second, third, and fourth level LUNs represented in successively 2309 * higher bytes. In particular, if (and only if) the first byte of a 64 2310 * bit LUN is zero, denoting "Peripheral Device Addressing Method" and 2311 * "Bus Identifier" zero, then the target implements LUNs compatible in 2312 * spirit with SCSI-2 LUNs (although under SCSI-3 there may be up to 2313 * 256 of them). Under SCSI-3 rules, a target is *required* to use 2314 * this format if it contains 256 or fewer Logical Units, none of which 2315 * are dependent logical units. 2316 * 2317 * These routines have knowledge of the structure and size of a scsi_lun_t. 2318 * 2319 * XXX Should these function be rewritten to take the scsi_lun_t *? 2320 */ 2321 scsi_lun64_t 2322 scsi_lun_to_lun64(scsi_lun_t lun) 2323 { 2324 scsi_lun64_t lun64; 2325 2326 /* check address method and bus identifier */ 2327 if (lun.sl_lun1_msb == 0) { 2328 /* single-level LUN */ 2329 lun64 = lun.sl_lun1_lsb; /* extract the 8-bit LUN */ 2330 2331 /* Ensure rest of LUN is zero, which it is supposed to be */ 2332 if ((lun.sl_lun2_msb == 0) && (lun.sl_lun2_lsb == 0) && 2333 (lun.sl_lun3_msb == 0) && (lun.sl_lun3_lsb == 0) && 2334 (lun.sl_lun4_msb == 0) && (lun.sl_lun4_lsb == 0)) { 2335 return (lun64); 2336 } 2337 2338 /* Oops, we got a bad scsi_lun_t. Leave it in 64-bit form */ 2339 SCSI_HBA_LOG((_LOG(DIAG1, BADLUN), NULL, NULL, 2340 "lun_to_lun64 bad lun %" PRIx64, *(scsi_lun64_t *)&lun)); 2341 } 2342 2343 /* 2344 * We have a big LUN that is not backward compatible. 2345 * Construct a 64 bit number using the right byte order. 2346 */ 2347 lun64 = 2348 ((scsi_lun64_t)lun.sl_lun1_msb << 56) | 2349 ((scsi_lun64_t)lun.sl_lun1_lsb << 48) | 2350 ((scsi_lun64_t)lun.sl_lun2_msb << 40) | 2351 ((scsi_lun64_t)lun.sl_lun2_lsb << 32) | 2352 ((scsi_lun64_t)lun.sl_lun3_msb << 24) | 2353 ((scsi_lun64_t)lun.sl_lun3_lsb << 16) | 2354 ((scsi_lun64_t)lun.sl_lun4_msb << 8) | 2355 (scsi_lun64_t)lun.sl_lun4_lsb; 2356 return (lun64); 2357 } 2358 2359 scsi_lun_t 2360 scsi_lun64_to_lun(scsi_lun64_t lun64) 2361 { 2362 scsi_lun_t lun; 2363 2364 if (lun64 < 256) { 2365 /* This LUN is in compatibility format */ 2366 lun.sl_lun1_msb = 0; 2367 lun.sl_lun1_lsb = (uchar_t)lun64; 2368 lun.sl_lun2_msb = 0; 2369 lun.sl_lun2_lsb = 0; 2370 lun.sl_lun3_msb = 0; 2371 lun.sl_lun3_lsb = 0; 2372 lun.sl_lun4_msb = 0; 2373 lun.sl_lun4_lsb = 0; 2374 } else { 2375 /* This in full 64 bit LUN format */ 2376 lun.sl_lun1_msb = (uchar_t)(lun64 >> 56); 2377 lun.sl_lun1_lsb = (uchar_t)(lun64 >> 48); 2378 lun.sl_lun2_msb = (uchar_t)(lun64 >> 40); 2379 lun.sl_lun2_lsb = (uchar_t)(lun64 >> 32); 2380 lun.sl_lun3_msb = (uchar_t)(lun64 >> 24); 2381 lun.sl_lun3_lsb = (uchar_t)(lun64 >> 16); 2382 lun.sl_lun4_msb = (uchar_t)(lun64 >> 8); 2383 lun.sl_lun4_lsb = (uchar_t)(lun64); 2384 2385 /* Oops, bad LUN -- this is required to be nonzero */ 2386 if (lun.sl_lun1_msb == 0) 2387 SCSI_HBA_LOG((_LOG(DIAG1, BADLUN), NULL, NULL, 2388 "lun64_to_lun bad lun %" PRIlun64, lun64)); 2389 } 2390 return (lun); 2391 } 2392 2393 /* 2394 * Return the lun from an address string. Either the lun is after the 2395 * first ',' or the entire addr is the lun. Return SCSI_LUN64_ILLEGAL 2396 * if the format is incorrect. 2397 * 2398 * If the addr specified has incorrect syntax (busconfig one of 2399 * bogus /devices path) then scsi_addr_to_lun64 can return SCSI_LUN64_ILLEGAL. 2400 */ 2401 scsi_lun64_t 2402 scsi_addr_to_lun64(char *addr) 2403 { 2404 scsi_lun64_t lun64; 2405 char *s; 2406 int i; 2407 2408 if (addr) { 2409 s = strchr(addr, ','); /* "addr,lun[,sfunc]" */ 2410 if (s) 2411 s++; /* skip ',' */ 2412 else 2413 s = addr; /* "lun" */ 2414 2415 for (lun64 = 0, i = 0; *s && (i < 16); s++, i++) { 2416 if (*s >= '0' && *s <= '9') 2417 lun64 = (lun64 << 4) + (*s - '0'); 2418 else if (*s >= 'A' && *s <= 'F') 2419 lun64 = (lun64 << 4) + 10 + (*s - 'A'); 2420 else if (*s >= 'a' && *s <= 'f') 2421 lun64 = (lun64 << 4) + 10 + (*s - 'a'); 2422 else 2423 break; 2424 } 2425 if (*s && (*s != ',')) /* addr,lun[,sfunc] is OK */ 2426 lun64 = SCSI_LUN64_ILLEGAL; 2427 } else 2428 lun64 = SCSI_LUN64_ILLEGAL; 2429 2430 if (lun64 == SCSI_LUN64_ILLEGAL) 2431 SCSI_HBA_LOG((_LOG(DIAG2, BADLUN), NULL, NULL, 2432 "addr_to_lun64 %s lun %" PRIlun64, 2433 addr ? addr : "NULL", lun64)); 2434 return (lun64); 2435 } 2436 2437 /* 2438 * Convert scsi ascii string data to NULL terminated (semi) legal IEEE 1275 2439 * "compatible" (name) property form. 2440 * 2441 * For ASCII INQUIRY data, a one-way conversion algorithm is needed to take 2442 * SCSI_ASCII (20h - 7Eh) to a 1275-like compatible form. The 1275 spec allows 2443 * letters, digits, one ",", and ". _ + -", all limited by a maximum 31 2444 * character length. Since ", ." are used as separators in the compatible 2445 * string itself, they are converted to "_". All SCSI_ASCII characters that 2446 * are illegal in 1275, as well as any illegal SCSI_ASCII characters 2447 * encountered, are converted to "_". To reduce length, trailing blanks are 2448 * trimmed from SCSI_ASCII fields prior to conversion. 2449 * 2450 * Example: SCSI_ASCII "ST32550W SUN2.1G" -> "ST32550W_SUN2_1G" 2451 * 2452 * NOTE: the 1275 string form is always less than or equal to the scsi form. 2453 */ 2454 static char * 2455 string_scsi_to_1275(char *s_1275, char *s_scsi, int len) 2456 { 2457 (void) strncpy(s_1275, s_scsi, len); 2458 s_1275[len--] = '\0'; 2459 2460 while (len >= 0) { 2461 if (s_1275[len] == ' ') 2462 s_1275[len--] = '\0'; /* trim trailing " " */ 2463 else 2464 break; 2465 } 2466 2467 while (len >= 0) { 2468 if (((s_1275[len] >= 'a') && (s_1275[len] <= 'z')) || 2469 ((s_1275[len] >= 'A') && (s_1275[len] <= 'Z')) || 2470 ((s_1275[len] >= '0') && (s_1275[len] <= '9')) || 2471 (s_1275[len] == '_') || 2472 (s_1275[len] == '+') || 2473 (s_1275[len] == '-')) 2474 len--; /* legal 1275 */ 2475 else 2476 s_1275[len--] = '_'; /* illegal SCSI_ASCII | 1275 */ 2477 } 2478 2479 return (s_1275); 2480 } 2481 2482 /* 2483 * Given the inquiry data, binding_set, and dtype_node for a scsi device, 2484 * return the nodename and compatible property for the device. The "compatible" 2485 * concept comes from IEEE-1275. The compatible information is returned is in 2486 * the correct form for direct use defining the "compatible" string array 2487 * property. Internally, "compatible" is also used to determine the nodename 2488 * to return. 2489 * 2490 * This function is provided as a separate entry point for use by drivers that 2491 * currently issue their own non-SCSA inquiry command and perform their own 2492 * node creation based their own private compiled in tables. Converting these 2493 * drivers to use this interface provides a quick easy way of obtaining 2494 * consistency as well as the flexibility associated with the 1275 techniques. 2495 * 2496 * The dtype_node is passed as a separate argument (instead of having the 2497 * implementation use inq_dtype). It indicates that information about 2498 * a secondary function embedded service should be produced. 2499 * 2500 * Callers must always use scsi_hba_nodename_compatible_free, even if 2501 * *nodenamep is null, to free the nodename and compatible information 2502 * when done. 2503 * 2504 * If a nodename can't be determined then **compatiblep will point to a 2505 * diagnostic string containing all the compatible forms. 2506 * 2507 * NOTE: some compatible strings may violate the 31 character restriction 2508 * imposed by IEEE-1275. This is not a problem because Solaris does not care 2509 * about this 31 character limit. 2510 * 2511 * Each compatible form belongs to a form-group. The form-groups currently 2512 * defined are generic ("scsiclass"), binding-set ("scsa.b"), and failover 2513 * ("scsa.f"). 2514 * 2515 * The following compatible forms, in high to low precedence 2516 * order, are defined for SCSI target device nodes. 2517 * 2518 * scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (1 *1&2) 2519 * scsiclass,DDEE.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (2 *1) 2520 * scsiclass,DDFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (3 *2) 2521 * scsiclass,DD.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR (4) 2522 * scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP (5 *1&2) 2523 * scsiclass,DDEE.vVVVVVVVV.pPPPPPPPPPPPPPPPP (6 *1) 2524 * scsiclass,DDFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP (7 *2) 2525 * scsiclass,DD.vVVVVVVVV.pPPPPPPPPPPPPPPPP (8) 2526 * scsa,DD.bBBBBBBBB (8.5 *3) 2527 * scsiclass,DDEEFFF (9 *1&2) 2528 * scsiclass,DDEE (10 *1) 2529 * scsiclass,DDFFF (11 *2) 2530 * scsiclass,DD (12) 2531 * scsa.fFFF (12.5 *4) 2532 * scsiclass (13) 2533 * 2534 * *1 only produced on a secondary function node 2535 * *2 only produced when generic form-group flags exist. 2536 * *3 only produced when binding-set form-group legacy support is needed 2537 * *4 only produced when failover form-group flags exist. 2538 * 2539 * where: 2540 * 2541 * v is the letter 'v'. Denotest the 2542 * beginning of VVVVVVVV. 2543 * 2544 * VVVVVVVV Translated scsi_vendor. 2545 * 2546 * p is the letter 'p'. Denotes the 2547 * beginning of PPPPPPPPPPPPPPPP. 2548 * 2549 * PPPPPPPPPPPPPPPP Translated scsi_product. 2550 * 2551 * r is the letter 'r'. Denotes the 2552 * beginning of RRRR. 2553 * 2554 * RRRR Translated scsi_revision. 2555 * 2556 * DD is a two digit ASCII hexadecimal 2557 * number. The value of the two digits is 2558 * based one the SCSI "Peripheral device 2559 * type" command set associated with the 2560 * node. On a primary node this is the 2561 * scsi_dtype of the primary command set, 2562 * on a secondary node this is the 2563 * scsi_dtype associated with the embedded 2564 * function command set. 2565 * 2566 * EE Same encoding used for DD. This form is 2567 * only generated on secondary function 2568 * nodes. The DD function is embedded in 2569 * an EE device. 2570 * 2571 * FFF Concatenation, in alphabetical order, 2572 * of the flag characters within a form-group. 2573 * For a given form-group, the following 2574 * flags are defined. 2575 * 2576 * scsiclass: (generic form-group): 2577 * R Removable_Media: Used when 2578 * inq_rmb is set. 2579 * 2580 * scsa.f: (failover form-group): 2581 * E Explicit Target_Port_Group: Used 2582 * when inq_tpgse is set and 'G' is 2583 * alse present. 2584 * G GUID: Used when a GUID can be 2585 * generated for the device. 2586 * I Implicit Target_Port_Group: Used 2587 * when inq_tpgs is set and 'G' is 2588 * also present. 2589 * 2590 * Forms using FFF are only be generated 2591 * if there are applicable flag 2592 * characters. 2593 * 2594 * b is the letter 'b'. Denotes the 2595 * beginning of BBBBBBBB. 2596 * 2597 * BBBBBBBB Binding-set. Operating System Specific: 2598 * scsi-binding-set property of HBA. 2599 */ 2600 #define NCOMPAT (1 + (13 + 2) + 1) 2601 #define COMPAT_LONGEST (strlen( \ 2602 "scsiclass,DDEEFFF.vVVVVVVVV.pPPPPPPPPPPPPPPPP.rRRRR" + 1)) 2603 2604 /* 2605 * Private version with extra device 'identity' arguments to allow code 2606 * to determine GUID FFF support. 2607 */ 2608 static void 2609 scsi_hba_identity_nodename_compatible_get(struct scsi_inquiry *inq, 2610 uchar_t *inq80, size_t inq80len, uchar_t *inq83, size_t inq83len, 2611 char *binding_set, int dtype_node, char *compat0, 2612 char **nodenamep, char ***compatiblep, int *ncompatiblep) 2613 { 2614 char vid[sizeof (inq->inq_vid) + 1 ]; 2615 char pid[sizeof (inq->inq_pid) + 1]; 2616 char rev[sizeof (inq->inq_revision) + 1]; 2617 char gf[sizeof ("R\0")]; 2618 char ff[sizeof ("EGI\0")]; 2619 int dtype_device; 2620 int ncompat; /* number of compatible */ 2621 char **compatp; /* compatible ptrs */ 2622 int i; 2623 char *nname; /* nodename */ 2624 char *dname; /* driver name */ 2625 char **csp; 2626 char *p; 2627 int tlen; 2628 int len; 2629 major_t major; 2630 ddi_devid_t devid; 2631 char *guid; 2632 2633 /* 2634 * Nodename_aliases: This table was originally designed to be 2635 * implemented via a new nodename_aliases file - a peer to the 2636 * driver_aliases that selects a nodename based on compatible 2637 * forms in much the same say driver_aliases is used to select 2638 * driver bindings from compatible forms. Each compatible form 2639 * is an 'alias'. Until a more general need for a 2640 * nodename_aliases file exists, which may never occur, the 2641 * scsi mappings are described here via a compiled in table. 2642 * 2643 * This table contains nodename mappings for self-identifying 2644 * scsi devices enumerated by the Solaris kernel. For a given 2645 * device, the highest precedence "compatible" form with a 2646 * mapping is used to select the nodename for the device. This 2647 * will typically be a generic nodename, however in some legacy 2648 * compatibility cases a driver nodename mapping may be selected. 2649 * 2650 * Because of possible breakage associated with switching SCSI 2651 * target devices from driver nodenames to generic nodenames, 2652 * we are currently unable to support generic nodenames for all 2653 * SCSI devices (binding-sets). Although /devices paths are 2654 * defined as unstable, avoiding possible breakage is 2655 * important. Some of the newer SCSI transports (USB) already 2656 * use generic nodenames. All new SCSI transports and target 2657 * devices should use generic nodenames. At times this decision 2658 * may be architecture dependent (sparc .vs. intel) based on when 2659 * a transport was supported on a particular architecture. 2660 * 2661 * We provide a base set of generic nodename mappings based on 2662 * scsiclass dtype and higher-precedence driver nodename 2663 * mappings based on scsa "binding-set" to cover legacy 2664 * issues. The binding-set is typically associated with 2665 * "scsi-binding-set" property value of the HBA. The legacy 2666 * mappings are provided independent of whether the driver they 2667 * refer to is installed. This allows a correctly named node 2668 * be created at discovery time, and binding to occur when/if 2669 * an add_drv of the legacy driver occurs. 2670 * 2671 * We also have mappings for legacy SUN hardware that 2672 * misidentifies itself (enclosure services which identify 2673 * themselves as processors). All future hardware should use 2674 * the correct dtype. 2675 * 2676 * As SCSI HBAs are modified to use the SCSA interfaces for 2677 * self-identifying SCSI target devices (PSARC/2004/116) the 2678 * nodename_aliases table (PSARC/2004/420) should be augmented 2679 * with legacy mappings in order to maintain compatibility with 2680 * existing /devices paths, especially for devices that house 2681 * an OS. Failure to do this may cause upgrade problems. 2682 * Additions for new target devices or transports should not 2683 * add scsa binding-set compatible mappings. 2684 */ 2685 static struct nodename_aliases { 2686 char *na_nodename; /* nodename */ 2687 char *na_alias; /* compatible form match */ 2688 } na[] = { 2689 /* # mapping to generic nodenames based on scsi dtype */ 2690 {"disk", "scsiclass,00"}, 2691 {"tape", "scsiclass,01"}, 2692 {"printer", "scsiclass,02"}, 2693 {"processor", "scsiclass,03"}, 2694 {"worm", "scsiclass,04"}, 2695 {"cdrom", "scsiclass,05"}, 2696 {"scanner", "scsiclass,06"}, 2697 {"optical-disk", "scsiclass,07"}, 2698 {"medium-changer", "scsiclass,08"}, 2699 {"obsolete", "scsiclass,09"}, 2700 {"prepress-a", "scsiclass,0a"}, 2701 {"prepress-b", "scsiclass,0b"}, 2702 {"array-controller", "scsiclass,0c"}, 2703 {"enclosure", "scsiclass,0d"}, 2704 {"disk", "scsiclass,0e"}, 2705 {"card-reader", "scsiclass,0f"}, 2706 {"bridge", "scsiclass,10"}, 2707 {"object-store", "scsiclass,11"}, 2708 {"reserved", "scsiclass,12"}, 2709 {"reserved", "scsiclass,13"}, 2710 {"reserved", "scsiclass,14"}, 2711 {"reserved", "scsiclass,15"}, 2712 {"reserved", "scsiclass,16"}, 2713 {"reserved", "scsiclass,17"}, 2714 {"reserved", "scsiclass,18"}, 2715 {"reserved", "scsiclass,19"}, 2716 {"reserved", "scsiclass,1a"}, 2717 {"reserved", "scsiclass,1b"}, 2718 {"reserved", "scsiclass,1c"}, 2719 {"reserved", "scsiclass,1d"}, 2720 {"well-known-lun", "scsiclass,1e"}, 2721 {"unknown", "scsiclass,1f"}, 2722 2723 #ifdef sparc 2724 /* # legacy mapping to driver nodenames for fcp binding-set */ 2725 {"ssd", "scsa,00.bfcp"}, 2726 {"st", "scsa,01.bfcp"}, 2727 {"sgen", "scsa,08.bfcp"}, 2728 {"ses", "scsa,0d.bfcp"}, 2729 2730 /* # legacy mapping to driver nodenames for vhci binding-set */ 2731 {"ssd", "scsa,00.bvhci"}, 2732 {"st", "scsa,01.bvhci"}, 2733 {"sgen", "scsa,08.bvhci"}, 2734 {"ses", "scsa,0d.bvhci"}, 2735 #else /* sparc */ 2736 /* # for x86 fcp and vhci use generic nodenames */ 2737 #endif /* sparc */ 2738 2739 #ifdef notdef 2740 /* 2741 * The following binding-set specific mappings are not being 2742 * delivered at this time, but are listed here as an examples of 2743 * the type of mappings needed. 2744 */ 2745 2746 /* # legacy mapping to driver nodenames for spi binding-set */ 2747 {"sd", "scsa,00.bspi"}, 2748 {"sd", "scsa,05.bspi"}, 2749 {"sd", "scsa,07.bspi"}, 2750 {"st", "scsa,01.bspi"}, 2751 {"ses", "scsa,0d.bspi"}, 2752 2753 /* # SUN misidentified spi hardware */ 2754 {"ses", "scsiclass,03.vSUN.pD2"}, 2755 {"ses", "scsiclass,03.vSYMBIOS.pD1000"}, 2756 2757 /* # legacy mapping to driver nodenames for atapi binding-set */ 2758 {"sd", "scsa,00.batapi"}, 2759 {"sd", "scsa,05.batapi"}, 2760 {"sd", "scsa,07.batapi"}, 2761 {"st", "scsa,01.batapi"}, 2762 {"unknown", "scsa,0d.batapi"}, 2763 2764 /* # legacy mapping to generic nodenames for usb binding-set */ 2765 {"disk", "scsa,05.busb"}, 2766 {"disk", "scsa,07.busb"}, 2767 {"changer", "scsa,08.busb"}, 2768 {"comm", "scsa,09.busb"}, 2769 {"array_ctlr", "scsa,0c.busb"}, 2770 {"esi", "scsa,0d.busb"}, 2771 #endif /* notdef */ 2772 2773 /* 2774 * mapping nodenames for mpt based on scsi dtype 2775 * for being compatible with the original node names 2776 * under mpt controller 2777 */ 2778 {"sd", "scsa,00.bmpt"}, 2779 {"sd", "scsa,05.bmpt"}, 2780 {"sd", "scsa,07.bmpt"}, 2781 {"st", "scsa,01.bmpt"}, 2782 {"ses", "scsa,0d.bmpt"}, 2783 {"sgen", "scsa,08.bmpt"}, 2784 {NULL, NULL} 2785 }; 2786 struct nodename_aliases *nap; 2787 2788 ASSERT(nodenamep && compatiblep && ncompatiblep && 2789 (binding_set == NULL || (strlen(binding_set) <= 8))); 2790 if ((nodenamep == NULL) || (compatiblep == NULL) || 2791 (ncompatiblep == NULL)) 2792 return; 2793 2794 /* 2795 * In order to reduce runtime we allocate one block of memory that 2796 * contains both the NULL terminated array of pointers to compatible 2797 * forms and the individual compatible strings. This block is 2798 * somewhat larger than needed, but is short lived - it only exists 2799 * until the caller can transfer the information into the "compatible" 2800 * string array property and call scsi_hba_nodename_compatible_free. 2801 */ 2802 tlen = NCOMPAT * COMPAT_LONGEST; 2803 compatp = kmem_alloc((NCOMPAT * sizeof (char *)) + tlen, KM_SLEEP); 2804 2805 /* convert inquiry data from SCSI ASCII to 1275 string */ 2806 (void) string_scsi_to_1275(vid, inq->inq_vid, 2807 sizeof (inq->inq_vid)); 2808 (void) string_scsi_to_1275(pid, inq->inq_pid, 2809 sizeof (inq->inq_pid)); 2810 (void) string_scsi_to_1275(rev, inq->inq_revision, 2811 sizeof (inq->inq_revision)); 2812 ASSERT((strlen(vid) <= sizeof (inq->inq_vid)) && 2813 (strlen(pid) <= sizeof (inq->inq_pid)) && 2814 (strlen(rev) <= sizeof (inq->inq_revision))); 2815 2816 /* 2817 * Form flags in ***ALPHABETICAL*** order within form-group: 2818 * 2819 * NOTE: When adding a new flag to an existing form-group, carefull 2820 * consideration must be given to not breaking existing bindings 2821 * based on that form-group. 2822 */ 2823 2824 /* 2825 * generic form-group flags 2826 * R removable: 2827 * Set when inq_rmb is set and for well known scsi dtypes. For a 2828 * bus where the entire device is removable (like USB), we expect 2829 * the HBA to intercept the inquiry data and set inq_rmb. 2830 * Since OBP does not distinguish removable media in its generic 2831 * name selection we avoid setting the 'R' flag if the root is not 2832 * yet mounted. 2833 */ 2834 i = 0; 2835 dtype_device = inq->inq_dtype & DTYPE_MASK; 2836 if (rootvp && (inq->inq_rmb || 2837 (dtype_device == DTYPE_WORM) || 2838 (dtype_device == DTYPE_RODIRECT) || 2839 (dtype_device == DTYPE_OPTICAL))) 2840 gf[i++] = 'R'; /* removable */ 2841 gf[i] = '\0'; 2842 2843 /* 2844 * failover form-group flags 2845 * E Explicit Target_Port_Group_Supported: 2846 * Set for a device that has a GUID if inq_tpgse also set. 2847 * G GUID: 2848 * Set when we have identity information, can determine a devid 2849 * from the identity information, and can generate a guid from 2850 * that devid. 2851 * I Implicit Target_Port_Group_Supported: 2852 * Set for a device that has a GUID if inq_tpgs also set. 2853 */ 2854 i = 0; 2855 if ((inq80 || inq83) && 2856 (ddi_devid_scsi_encode(DEVID_SCSI_ENCODE_VERSION_LATEST, NULL, 2857 (uchar_t *)inq, sizeof (*inq), inq80, inq80len, inq83, inq83len, 2858 &devid) == DDI_SUCCESS)) { 2859 guid = ddi_devid_to_guid(devid); 2860 ddi_devid_free(devid); 2861 } else 2862 guid = NULL; 2863 if (guid && (inq->inq_tpgs & TPGS_FAILOVER_EXPLICIT)) 2864 ff[i++] = 'E'; /* EXPLICIT TPGS */ 2865 if (guid) 2866 ff[i++] = 'G'; /* GUID */ 2867 if (guid && (inq->inq_tpgs & TPGS_FAILOVER_IMPLICIT)) 2868 ff[i++] = 'I'; /* IMPLICIT TPGS */ 2869 ff[i] = '\0'; 2870 if (guid) 2871 ddi_devid_free_guid(guid); 2872 2873 /* 2874 * Construct all applicable compatible forms. See comment at the 2875 * head of the function for a description of the compatible forms. 2876 */ 2877 csp = compatp; 2878 p = (char *)(compatp + NCOMPAT); 2879 2880 /* ( 0) driver (optional, not documented in scsi(4)) */ 2881 if (compat0) { 2882 *csp++ = p; 2883 (void) snprintf(p, tlen, "%s", compat0); 2884 len = strlen(p) + 1; 2885 p += len; 2886 tlen -= len; 2887 } 2888 2889 /* ( 1) scsiclass,DDEEFFF.vV.pP.rR */ 2890 if ((dtype_device != dtype_node) && *gf && *vid && *pid && *rev) { 2891 *csp++ = p; 2892 (void) snprintf(p, tlen, "scsiclass,%02x%02x%s.v%s.p%s.r%s", 2893 dtype_node, dtype_device, gf, vid, pid, rev); 2894 len = strlen(p) + 1; 2895 p += len; 2896 tlen -= len; 2897 } 2898 2899 /* ( 2) scsiclass,DDEE.vV.pP.rR */ 2900 if ((dtype_device != dtype_node) && *vid && *pid && *rev) { 2901 *csp++ = p; 2902 (void) snprintf(p, tlen, "scsiclass,%02x%02x.v%s.p%s.r%s", 2903 dtype_node, dtype_device, vid, pid, rev); 2904 len = strlen(p) + 1; 2905 p += len; 2906 tlen -= len; 2907 } 2908 2909 /* ( 3) scsiclass,DDFFF.vV.pP.rR */ 2910 if (*gf && *vid && *pid && *rev) { 2911 *csp++ = p; 2912 (void) snprintf(p, tlen, "scsiclass,%02x%s.v%s.p%s.r%s", 2913 dtype_node, gf, vid, pid, rev); 2914 len = strlen(p) + 1; 2915 p += len; 2916 tlen -= len; 2917 } 2918 2919 /* ( 4) scsiclass,DD.vV.pP.rR */ 2920 if (*vid && *pid && rev) { 2921 *csp++ = p; 2922 (void) snprintf(p, tlen, "scsiclass,%02x.v%s.p%s.r%s", 2923 dtype_node, vid, pid, rev); 2924 len = strlen(p) + 1; 2925 p += len; 2926 tlen -= len; 2927 } 2928 2929 /* ( 5) scsiclass,DDEEFFF.vV.pP */ 2930 if ((dtype_device != dtype_node) && *gf && *vid && *pid) { 2931 *csp++ = p; 2932 (void) snprintf(p, tlen, "scsiclass,%02x%02x%s.v%s.p%s", 2933 dtype_node, dtype_device, gf, vid, pid); 2934 len = strlen(p) + 1; 2935 p += len; 2936 tlen -= len; 2937 } 2938 2939 /* ( 6) scsiclass,DDEE.vV.pP */ 2940 if ((dtype_device != dtype_node) && *vid && *pid) { 2941 *csp++ = p; 2942 (void) snprintf(p, tlen, "scsiclass,%02x%02x.v%s.p%s", 2943 dtype_node, dtype_device, vid, pid); 2944 len = strlen(p) + 1; 2945 p += len; 2946 tlen -= len; 2947 } 2948 2949 /* ( 7) scsiclass,DDFFF.vV.pP */ 2950 if (*gf && *vid && *pid) { 2951 *csp++ = p; 2952 (void) snprintf(p, tlen, "scsiclass,%02x%s.v%s.p%s", 2953 dtype_node, gf, vid, pid); 2954 len = strlen(p) + 1; 2955 p += len; 2956 tlen -= len; 2957 } 2958 2959 /* ( 8) scsiclass,DD.vV.pP */ 2960 if (*vid && *pid) { 2961 *csp++ = p; 2962 (void) snprintf(p, tlen, "scsiclass,%02x.v%s.p%s", 2963 dtype_node, vid, pid); 2964 len = strlen(p) + 1; 2965 p += len; 2966 tlen -= len; 2967 } 2968 2969 /* (8.5) scsa,DD.bB (not documented in scsi(4)) */ 2970 if (binding_set) { 2971 *csp++ = p; 2972 (void) snprintf(p, tlen, "scsa,%02x.b%s", 2973 dtype_node, binding_set); 2974 len = strlen(p) + 1; 2975 p += len; 2976 tlen -= len; 2977 } 2978 2979 /* ( 9) scsiclass,DDEEFFF */ 2980 if ((dtype_device != dtype_node) && *gf) { 2981 *csp++ = p; 2982 (void) snprintf(p, tlen, "scsiclass,%02x%02x%s", 2983 dtype_node, dtype_device, gf); 2984 len = strlen(p) + 1; 2985 p += len; 2986 tlen -= len; 2987 } 2988 2989 /* (10) scsiclass,DDEE */ 2990 if (dtype_device != dtype_node) { 2991 *csp++ = p; 2992 (void) snprintf(p, tlen, "scsiclass,%02x%02x", 2993 dtype_node, dtype_device); 2994 len = strlen(p) + 1; 2995 p += len; 2996 tlen -= len; 2997 } 2998 2999 /* (11) scsiclass,DDFFF */ 3000 if (*gf) { 3001 *csp++ = p; 3002 (void) snprintf(p, tlen, "scsiclass,%02x%s", 3003 dtype_node, gf); 3004 len = strlen(p) + 1; 3005 p += len; 3006 tlen -= len; 3007 } 3008 3009 /* (12) scsiclass,DD */ 3010 *csp++ = p; 3011 (void) snprintf(p, tlen, "scsiclass,%02x", dtype_node); 3012 len = strlen(p) + 1; 3013 p += len; 3014 tlen -= len; 3015 3016 /* (12.5) scsa.fFFF */ 3017 if (*ff) { 3018 *csp++ = p; 3019 (void) snprintf(p, tlen, "scsa.f%s", ff); 3020 len = strlen(p) + 1; 3021 p += len; 3022 tlen -= len; 3023 } 3024 3025 /* (13) scsiclass */ 3026 *csp++ = p; 3027 (void) snprintf(p, tlen, "scsiclass"); 3028 len = strlen(p) + 1; 3029 p += len; 3030 tlen -= len; 3031 ASSERT(tlen >= 0); 3032 3033 *csp = NULL; /* NULL terminate array of pointers */ 3034 ncompat = csp - compatp; 3035 3036 /* 3037 * When determining a nodename, a nodename_aliases specified 3038 * mapping has precedence over using a driver_aliases specified 3039 * driver binding as a nodename. 3040 * 3041 * See if any of the compatible forms have a nodename_aliases 3042 * specified nodename. These mappings are described by 3043 * nodename_aliases entries like: 3044 * 3045 * disk "scsiclass,00" 3046 * enclosure "scsiclass,03.vSYMBIOS.pD1000" 3047 * ssd "scsa,00.bfcp" 3048 * 3049 * All nodename_aliases mappings should idealy be to generic 3050 * names, however a higher precedence legacy mapping to a 3051 * driver name may exist. The highest precedence mapping 3052 * provides the nodename, so legacy driver nodename mappings 3053 * (if they exist) take precedence over generic nodename 3054 * mappings. 3055 */ 3056 for (nname = NULL, csp = compatp; (nname == NULL) && *csp; csp++) { 3057 for (nap = na; nap->na_nodename; nap++) { 3058 if (strcmp(*csp, nap->na_alias) == 0) { 3059 nname = nap->na_nodename; 3060 break; 3061 } 3062 } 3063 } 3064 3065 /* 3066 * If no nodename_aliases mapping exists then use the 3067 * driver_aliases specified driver binding as a nodename. 3068 * Determine the driver based on compatible (which may 3069 * have the passed in compat0 as the first item). The 3070 * driver_aliases file has entries like 3071 * 3072 * sd "scsiclass,00" 3073 * 3074 * that map compatible forms to specific drivers. These 3075 * entries are established by add_drv. We use the most specific 3076 * driver binding as the nodename. This matches the eventual 3077 * ddi_driver_compatible_major() binding that will be 3078 * established by bind_node() 3079 */ 3080 if (nname == NULL) { 3081 for (dname = NULL, csp = compatp; *csp; csp++) { 3082 major = ddi_name_to_major(*csp); 3083 if ((major == (major_t)-1) || 3084 (devnamesp[major].dn_flags & DN_DRIVER_REMOVED)) 3085 continue; 3086 if (dname = ddi_major_to_name(major)) 3087 break; 3088 } 3089 nname = dname; 3090 } 3091 3092 /* return results */ 3093 if (nname) { 3094 *nodenamep = kmem_alloc(strlen(nname) + 1, KM_SLEEP); 3095 (void) strcpy(*nodenamep, nname); 3096 } else { 3097 *nodenamep = NULL; 3098 3099 /* 3100 * If no nodename could be determined return a special 3101 * 'compatible' to be used for a diagnostic message. This 3102 * compatible contains all compatible forms concatenated 3103 * into a single string pointed to by the first element. 3104 */ 3105 if (nname == NULL) { 3106 for (csp = compatp; *(csp + 1); csp++) 3107 *((*csp) + strlen(*csp)) = ' '; 3108 *(compatp + 1) = NULL; 3109 ncompat = 1; 3110 } 3111 3112 } 3113 *compatiblep = compatp; 3114 *ncompatiblep = ncompat; 3115 } 3116 3117 void 3118 scsi_hba_nodename_compatible_get(struct scsi_inquiry *inq, 3119 char *binding_set, int dtype_node, char *compat0, 3120 char **nodenamep, char ***compatiblep, int *ncompatiblep) 3121 { 3122 scsi_hba_identity_nodename_compatible_get(inq, 3123 NULL, 0, NULL, 0, binding_set, dtype_node, compat0, nodenamep, 3124 compatiblep, ncompatiblep); 3125 } 3126 3127 /* 3128 * Free allocations associated with scsi_hba_nodename_compatible_get or 3129 * scsi_hba_identity_nodename_compatible_get use. 3130 */ 3131 void 3132 scsi_hba_nodename_compatible_free(char *nodename, char **compatible) 3133 { 3134 if (nodename) 3135 kmem_free(nodename, strlen(nodename) + 1); 3136 3137 if (compatible) 3138 kmem_free(compatible, (NCOMPAT * sizeof (char *)) + 3139 (NCOMPAT * COMPAT_LONGEST)); 3140 } 3141 3142 static int 3143 scsi_hba_bus_config(dev_info_t *self, uint_t flag, ddi_bus_config_op_t op, 3144 void *arg, dev_info_t **childp) 3145 { 3146 scsi_hba_tran_t *tran; 3147 3148 tran = ddi_get_driver_private(self); 3149 if (tran && tran->tran_bus_config) { 3150 return (tran->tran_bus_config(self, flag, op, arg, childp)); 3151 } 3152 3153 /* 3154 * Force reprobe for BUS_CONFIG_ONE or when manually reconfiguring 3155 * via devfsadm(1m) to emulate deferred attach. 3156 * Reprobe only discovers driver.conf enumerated nodes, more 3157 * dynamic implementations probably require their own bus_config. 3158 */ 3159 if ((op == BUS_CONFIG_ONE) || (flag & NDI_DRV_CONF_REPROBE)) 3160 flag |= NDI_CONFIG_REPROBE; 3161 3162 return (ndi_busop_bus_config(self, flag, op, arg, childp, 0)); 3163 } 3164 3165 static int 3166 scsi_hba_bus_unconfig(dev_info_t *self, uint_t flag, ddi_bus_config_op_t op, 3167 void *arg) 3168 { 3169 scsi_hba_tran_t *tran; 3170 3171 tran = ddi_get_driver_private(self); 3172 if (tran && tran->tran_bus_unconfig) { 3173 return (tran->tran_bus_unconfig(self, flag, op, arg)); 3174 } 3175 return (ndi_busop_bus_unconfig(self, flag, op, arg)); 3176 } 3177 3178 void 3179 scsi_hba_pkt_comp(struct scsi_pkt *pkt) 3180 { 3181 ASSERT(pkt); 3182 if (pkt->pkt_comp == NULL) 3183 return; 3184 3185 /* 3186 * For HBA drivers that implement tran_setup_pkt(9E), if we are 3187 * completing a 'consistent' mode DMA operation then we must 3188 * perform dma_sync prior to calling pkt_comp to ensure that 3189 * the target driver sees the correct data in memory. 3190 */ 3191 ASSERT((pkt->pkt_flags & FLAG_NOINTR) == 0); 3192 if (((pkt->pkt_dma_flags & DDI_DMA_CONSISTENT) && 3193 (pkt->pkt_dma_flags & DDI_DMA_READ)) && 3194 ((P_TO_TRAN(pkt)->tran_setup_pkt) != NULL)) { 3195 scsi_sync_pkt(pkt); 3196 } 3197 (*pkt->pkt_comp)(pkt); 3198 } 3199