1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2000 by Cisco Systems, Inc. All rights reserved. 23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 * 26 * iSCSI Software Initiator 27 */ 28 29 /* 30 * Framework interface routines for iSCSI 31 */ 32 33 #include "iscsi.h" /* main header */ 34 #include <sys/iscsi_protocol.h> /* protocol structs */ 35 #include <sys/scsi/adapters/iscsi_if.h> /* ioctl interfaces */ 36 #include "iscsi_targetparam.h" 37 #include "persistent.h" 38 #include <sys/scsi/adapters/iscsi_door.h> 39 #include <sys/dlpi.h> 40 #include <sys/utsname.h> 41 #include "isns_client.h" 42 #include "isns_protocol.h" 43 #include <sys/bootprops.h> 44 #include <sys/types.h> 45 #include <sys/bootconf.h> 46 47 #define ISCSI_NAME_VERSION "iSCSI Initiator v-1.55" 48 49 #define MAX_GET_NAME_SIZE 1024 50 #define MAX_NAME_PROP_SIZE 256 51 #define UNDEFINED -1 52 #define ISCSI_DISC_DELAY 2 /* seconds */ 53 54 /* 55 * +--------------------------------------------------------------------+ 56 * | iscsi globals | 57 * +--------------------------------------------------------------------+ 58 */ 59 void *iscsi_state; 60 kmutex_t iscsi_oid_mutex; 61 uint32_t iscsi_oid; 62 int iscsi_nop_delay = ISCSI_DEFAULT_NOP_DELAY; 63 int iscsi_rx_window = ISCSI_DEFAULT_RX_WINDOW; 64 int iscsi_rx_max_window = ISCSI_DEFAULT_RX_MAX_WINDOW; 65 boolean_t iscsi_logging = B_FALSE; 66 67 extern ib_boot_prop_t *iscsiboot_prop; 68 extern int modrootloaded; 69 extern struct bootobj rootfs; 70 71 /* 72 * +--------------------------------------------------------------------+ 73 * | iscsi.c prototypes | 74 * +--------------------------------------------------------------------+ 75 */ 76 static int iscsi_getinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, 77 void *arg, void **result); 78 static int iscsi_attach(dev_info_t *dip, ddi_attach_cmd_t cmd); 79 static int iscsi_detach(dev_info_t *dip, ddi_detach_cmd_t cmd); 80 81 /* scsi_tran prototypes */ 82 static int iscsi_tran_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 83 scsi_hba_tran_t *hba_tran, struct scsi_device *sd); 84 static int iscsi_tran_lun_probe(struct scsi_device *sd, int (*callback) ()); 85 static struct scsi_pkt *iscsi_tran_init_pkt(struct scsi_address *ap, 86 struct scsi_pkt *pkt, struct buf *bp, int cmdlen, int statuslen, 87 int tgtlen, int flags, int (*callback) (), caddr_t arg); 88 static void iscsi_tran_lun_free(dev_info_t *hba_dip, dev_info_t *lun_dip, 89 scsi_hba_tran_t *hba_tran, struct scsi_device *sd); 90 static int iscsi_tran_start(struct scsi_address *ap, struct scsi_pkt *pkt); 91 static int iscsi_tran_abort(struct scsi_address *ap, struct scsi_pkt *pkt); 92 static int iscsi_tran_reset(struct scsi_address *ap, int level); 93 static int iscsi_tran_getcap(struct scsi_address *ap, char *cap, int whom); 94 static int iscsi_tran_setcap(struct scsi_address *ap, char *cap, 95 int value, int whom); 96 static void iscsi_tran_destroy_pkt(struct scsi_address *ap, 97 struct scsi_pkt *pkt); 98 static void iscsi_tran_dmafree(struct scsi_address *ap, 99 struct scsi_pkt *pkt); 100 static void iscsi_tran_sync_pkt(struct scsi_address *ap, 101 struct scsi_pkt *pkt); 102 static void iscsi_tran_sync_pkt(struct scsi_address *ap, 103 struct scsi_pkt *pkt); 104 static int iscsi_tran_reset_notify(struct scsi_address *ap, int flag, 105 void (*callback) (caddr_t), caddr_t arg); 106 static int iscsi_tran_bus_config(dev_info_t *parent, uint_t flags, 107 ddi_bus_config_op_t op, void *arg, dev_info_t **childp); 108 static int iscsi_tran_bus_unconfig(dev_info_t *parent, uint_t flags, 109 ddi_bus_config_op_t op, void *arg); 110 static int iscsi_tran_get_name(struct scsi_device *sd, char *name, int len); 111 static int iscsi_tran_get_bus_addr(struct scsi_device *sd, char *name, int len); 112 113 /* bus_ops prototypes */ 114 /* LINTED E_STATIC_UNUSED */ 115 static ddi_intrspec_t iscsi_get_intrspec(dev_info_t *dip, dev_info_t *rdip, 116 uint_t inumber); 117 /* LINTED E_STATIC_UNUSED */ 118 static int iscsi_add_intrspec(dev_info_t *dip, dev_info_t *rdip, 119 ddi_intrspec_t intrspec, ddi_iblock_cookie_t *iblock_cookiep, 120 ddi_idevice_cookie_t *idevice_cookiep, uint_t (*int_handler)(caddr_t 121 int_handler_arg), caddr_t int_handler_arg, int kind); 122 /* LINTED E_STATIC_UNUSED */ 123 static void iscsi_remove_intrspec(dev_info_t *dip, dev_info_t *rdip, 124 ddi_intrspec_t intrspec, ddi_iblock_cookie_t iblock_cookie); 125 /* LINTED E_STATIC_UNUSED */ 126 static int iscsi_ctl(dev_info_t *dip, dev_info_t *rdip, ddi_ctl_enum_t ctlop, 127 void *arg, void *result); 128 129 /* cb_ops prototypes */ 130 static int iscsi_open(dev_t *devp, int flags, int otyp, cred_t *credp); 131 static int iscsi_close(dev_t dev, int flag, int otyp, cred_t *credp); 132 static int iscsi_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, 133 cred_t *credp, int *rvalp); 134 135 int iscsi_get_persisted_param(uchar_t *name, 136 iscsi_param_get_t *ipgp, 137 iscsi_login_params_t *params); 138 static void iscsi_override_target_default(iscsi_hba_t *ihp, 139 iscsi_param_get_t *ipg); 140 141 /* scsi_tran helpers */ 142 static int iscsi_virt_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 143 scsi_hba_tran_t *hba_tran, struct scsi_device *sd); 144 static int iscsi_phys_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 145 scsi_hba_tran_t *hba_tran, struct scsi_device *sd); 146 static int iscsi_i_commoncap(struct scsi_address *ap, char *cap, 147 int val, int lunonly, int doset); 148 static void iscsi_get_name_to_iqn(char *name, int name_max_len); 149 static void iscsi_get_name_from_iqn(char *name, int name_max_len); 150 static boolean_t iscsi_cmp_boot_sess_oid(iscsi_hba_t *ihp, uint32_t oid); 151 152 /* iscsi initiator service helpers */ 153 static boolean_t iscsi_enter_service_zone(iscsi_hba_t *ihp, uint32_t status); 154 static void iscsi_exit_service_zone(iscsi_hba_t *ihp, uint32_t status); 155 static void iscsi_check_miniroot(iscsi_hba_t *ihp); 156 static void iscsi_get_tunable_default(iscsi_tunable_object_t *param); 157 static int iscsi_get_persisted_tunable_param(uchar_t *name, 158 iscsi_tunable_object_t *tpsg); 159 static void iscsi_set_default_tunable_params(iscsi_tunable_params_t *params); 160 161 /* struct helpers prototypes */ 162 163 /* 164 * At this point this driver doesn't need this structure because nothing 165 * is done during the open, close or ioctl. Code put in place because 166 * some admin related work might be done in the ioctl routine. 167 */ 168 static struct cb_ops iscsi_cb_ops = { 169 iscsi_open, /* open */ 170 iscsi_close, /* close */ 171 nodev, /* strategy */ 172 nodev, /* print */ 173 nodev, /* dump */ 174 nodev, /* read */ 175 nodev, /* write */ 176 iscsi_ioctl, /* ioctl */ 177 nodev, /* devmap */ 178 nodev, /* mmap */ 179 nodev, /* segmap */ 180 nochpoll, /* poll */ 181 ddi_prop_op, /* prop_op */ 182 NULL, /* streamtab */ 183 D_NEW | D_MP | D_HOTPLUG, /* flags */ 184 CB_REV, /* cb_rev */ 185 nodev, /* aread */ 186 nodev, /* awrite */ 187 }; 188 189 static struct dev_ops iscsi_dev_ops = { 190 DEVO_REV, /* devo_rev */ 191 0, /* refcnt */ 192 iscsi_getinfo, /* getinfo */ 193 nulldev, /* identify */ 194 nulldev, /* probe */ 195 iscsi_attach, /* attach */ 196 iscsi_detach, /* detach */ 197 nodev, /* reset */ 198 &iscsi_cb_ops, /* driver operations */ 199 NULL, /* bus ops */ 200 NULL, /* power management */ 201 ddi_quiesce_not_needed, /* quiesce */ 202 }; 203 204 static struct modldrv modldrv = { 205 &mod_driverops, /* drv_modops */ 206 ISCSI_NAME_VERSION, /* drv_linkinfo */ 207 &iscsi_dev_ops /* drv_dev_ops */ 208 }; 209 210 static struct modlinkage modlinkage = { 211 MODREV_1, /* ml_rev */ 212 &modldrv, /* ml_linkage[] */ 213 NULL /* NULL termination */ 214 }; 215 216 /* 217 * This structure is bogus. scsi_hba_attach_setup() requires, as in the kernel 218 * will panic if you don't pass this in to the routine, this information. 219 * Need to determine what the actual impact to the system is by providing 220 * this information if any. Since dma allocation is done in pkt_init it may 221 * not have any impact. These values are straight from the Writing Device 222 * Driver manual. 223 */ 224 static ddi_dma_attr_t iscsi_dma_attr = { 225 DMA_ATTR_V0, /* ddi_dma_attr version */ 226 0, /* low address */ 227 0xffffffff, /* high address */ 228 0x00ffffff, /* counter upper bound */ 229 1, /* alignment requirements */ 230 0x3f, /* burst sizes */ 231 1, /* minimum DMA access */ 232 0xffffffff, /* maximum DMA access */ 233 (1 << 24) - 1, /* segment boundary restrictions */ 234 1, /* scater/gather list length */ 235 512, /* device granularity */ 236 0 /* DMA flags */ 237 }; 238 239 /* 240 * _init - General driver init entry 241 */ 242 int 243 _init(void) 244 { 245 int rval = 0; 246 247 iscsi_net_init(); 248 249 mutex_init(&iscsi_oid_mutex, NULL, MUTEX_DRIVER, NULL); 250 iscsi_oid = ISCSI_INITIATOR_OID; 251 252 /* 253 * Set up the soft state structures. If this driver is actually 254 * being attached to the system then we'll have at least one 255 * HBA/NIC used. 256 */ 257 rval = ddi_soft_state_init(&iscsi_state, 258 sizeof (iscsi_hba_t), 1); 259 if (rval != 0) { 260 iscsi_net_fini(); 261 goto init_done; 262 } 263 264 rval = scsi_hba_init(&modlinkage); 265 if (rval != 0) { 266 ddi_soft_state_fini(&iscsi_state); 267 iscsi_net_fini(); 268 goto init_done; 269 } 270 271 rval = mod_install(&modlinkage); 272 if (rval != 0) { 273 ddi_soft_state_fini(&iscsi_state); 274 scsi_hba_fini(&modlinkage); 275 iscsi_net_fini(); 276 goto init_done; 277 } 278 (void) iscsi_door_ini(); 279 280 init_done: 281 return (rval); 282 } 283 284 /* 285 * _fini - General driver destructor entry 286 */ 287 int 288 _fini(void) 289 { 290 int rval = 0; 291 292 rval = mod_remove(&modlinkage); 293 if (rval == 0) { 294 scsi_hba_fini(&modlinkage); 295 ddi_soft_state_fini(&iscsi_state); 296 mutex_destroy(&iscsi_oid_mutex); 297 (void) iscsi_door_term(); 298 iscsi_net_fini(); 299 } 300 return (rval); 301 } 302 303 /* 304 * _info - General driver info entry 305 */ 306 int 307 _info(struct modinfo *mp) 308 { 309 int rval = 0; 310 311 rval = mod_info(&modlinkage, mp); 312 313 return (rval); 314 } 315 316 317 /* 318 * +--------------------------------------------------------------------+ 319 * | Start of dev_ops routines | 320 * +--------------------------------------------------------------------+ 321 */ 322 323 /* 324 * iscsi_getinfo - returns general driver information 325 */ 326 /* ARGSUSED */ 327 static int 328 iscsi_getinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, 329 void *arg, void **result) 330 { 331 int rval = DDI_SUCCESS; 332 int instance = getminor((dev_t)arg); 333 iscsi_hba_t *ip; 334 335 switch (infocmd) { 336 case DDI_INFO_DEVT2DEVINFO: 337 if ((ip = ddi_get_soft_state(iscsi_state, instance)) == NULL) { 338 return (DDI_FAILURE); 339 } 340 *result = ip->hba_dip; 341 if (ip->hba_dip == NULL) 342 rval = DDI_FAILURE; 343 else 344 rval = DDI_SUCCESS; 345 break; 346 347 case DDI_INFO_DEVT2INSTANCE: 348 *result = (void *)(uintptr_t)instance; 349 rval = DDI_SUCCESS; 350 break; 351 352 default: 353 rval = DDI_FAILURE; 354 break; 355 } 356 return (rval); 357 } 358 359 360 /* 361 * iscsi_attach -- Attach instance of an iSCSI HBA. We 362 * will attempt to create our HBA and register it with 363 * scsi_vhci. If it's not possible to create the HBA 364 * or register with vhci we will fail the attach. 365 */ 366 static int 367 iscsi_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) 368 { 369 int rval = DDI_SUCCESS; 370 int instance = ddi_get_instance(dip); 371 iscsi_hba_t *ihp = NULL; 372 scsi_hba_tran_t *tran = NULL; 373 char init_port_name[MAX_NAME_PROP_SIZE]; 374 375 switch (cmd) { 376 case DDI_ATTACH: 377 /* create iSCSH HBA devctl device node */ 378 if (ddi_create_minor_node(dip, ISCSI_DEVCTL, S_IFCHR, 0, 379 DDI_PSEUDO, 0) == DDI_SUCCESS) { 380 381 /* allocate HBA soft state */ 382 if (ddi_soft_state_zalloc(iscsi_state, instance) != 383 DDI_SUCCESS) { 384 ddi_remove_minor_node(dip, NULL); 385 rval = DDI_FAILURE; 386 break; 387 } 388 389 /* get reference to soft state */ 390 if ((ihp = (iscsi_hba_t *)ddi_get_soft_state( 391 iscsi_state, instance)) == NULL) { 392 ddi_remove_minor_node(dip, NULL); 393 ddi_soft_state_free(iscsi_state, instance); 394 rval = DDI_FAILURE; 395 break; 396 } 397 398 /* init HBA mutex used to protect discovery events */ 399 mutex_init(&ihp->hba_discovery_events_mutex, NULL, 400 MUTEX_DRIVER, NULL); 401 402 /* Get LDI ident */ 403 rval = ldi_ident_from_dip(dip, &ihp->hba_li); 404 ASSERT(rval == 0); /* Failure indicates invalid arg */ 405 406 /* init HBA mutex used to protect service status */ 407 mutex_init(&ihp->hba_service_lock, NULL, 408 MUTEX_DRIVER, NULL); 409 cv_init(&ihp->hba_service_cv, NULL, CV_DRIVER, NULL); 410 411 /* 412 * init SendTargets semaphore that is used to allow 413 * only one operation at a time 414 */ 415 sema_init(&ihp->hba_sendtgts_semaphore, 1, NULL, 416 SEMA_DRIVER, NULL); 417 418 ihp->hba_sess_list = NULL; 419 rw_init(&ihp->hba_sess_list_rwlock, NULL, 420 RW_DRIVER, NULL); 421 422 /* allocate scsi_hba_tran */ 423 if ((tran = scsi_hba_tran_alloc(dip, SCSI_HBA_CANSLEEP)) 424 == NULL) { 425 ddi_remove_minor_node(dip, NULL); 426 goto iscsi_attach_failed2; 427 } 428 429 /* soft state setup */ 430 ihp->hba_sig = ISCSI_SIG_HBA; 431 ihp->hba_tran = tran; 432 ihp->hba_dip = dip; 433 if (iscsiboot_prop == NULL) { 434 ihp->hba_service_status = 435 ISCSI_SERVICE_DISABLED; 436 ihp->hba_service_status_overwrite = B_FALSE; 437 } else { 438 ihp->hba_service_status = 439 ISCSI_SERVICE_ENABLED; 440 ihp->hba_service_status_overwrite = B_TRUE; 441 } 442 ihp->hba_service_client_count = 0; 443 444 mutex_enter(&iscsi_oid_mutex); 445 ihp->hba_oid = iscsi_oid++; 446 mutex_exit(&iscsi_oid_mutex); 447 448 ihp->hba_name[0] = '\0'; 449 ihp->hba_name_length = 0; 450 ihp->hba_alias_length = 0; 451 ihp->hba_alias[0] = '\0'; 452 453 iscsi_net->tweaks.rcvbuf = ddi_prop_get_int( 454 DDI_DEV_T_ANY, ihp->hba_dip, 0, "so-rcvbuf", 455 ISCSI_SOCKET_RCVBUF_SIZE); 456 457 iscsi_net->tweaks.sndbuf = ddi_prop_get_int( 458 DDI_DEV_T_ANY, ihp->hba_dip, 0, "so-sndbuf", 459 ISCSI_SOCKET_SNDBUF_SIZE); 460 461 iscsi_net->tweaks.nodelay = ddi_prop_get_int( 462 DDI_DEV_T_ANY, ihp->hba_dip, 0, "tcp-nodelay", 463 ISCSI_TCP_NODELAY_DEFAULT); 464 465 iscsi_net->tweaks.conn_notify_threshold = 466 ddi_prop_get_int(DDI_DEV_T_ANY, 467 ihp->hba_dip, 0, "tcp-conn-notify-threshold", 468 ISCSI_TCP_CNOTIFY_THRESHOLD_DEFAULT); 469 470 iscsi_net->tweaks.conn_abort_threshold = 471 ddi_prop_get_int(DDI_DEV_T_ANY, ihp->hba_dip, 472 0, "tcp-conn-abort-threshold", 473 ISCSI_TCP_CABORT_THRESHOLD_DEFAULT); 474 475 iscsi_net->tweaks.abort_threshold = ddi_prop_get_int( 476 DDI_DEV_T_ANY, ihp->hba_dip, 0, 477 "tcp-abort-threshold", 478 ISCSI_TCP_ABORT_THRESHOLD_DEFAULT); 479 480 ihp->hba_config_storm_delay = ddi_prop_get_int( 481 DDI_DEV_T_ANY, ihp->hba_dip, 0, 482 "config-storm-delay", 483 ISCSI_CONFIG_STORM_DELAY_DEFAULT); 484 485 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 486 "so-rcvbuf", iscsi_net->tweaks.rcvbuf); 487 488 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 489 "so-sndbuf", iscsi_net->tweaks.sndbuf); 490 491 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 492 "tcp-nodelay", iscsi_net->tweaks.nodelay); 493 494 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 495 "tcp-conn-notify-threshold", 496 iscsi_net->tweaks.conn_notify_threshold); 497 498 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 499 "tcp-conn-abort-threshold", 500 iscsi_net->tweaks.conn_abort_threshold); 501 502 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 503 "tcp-abort-threshold", 504 iscsi_net->tweaks.abort_threshold); 505 506 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 507 "config-storm-delay", 508 ihp->hba_config_storm_delay); 509 510 /* setup hba defaults */ 511 iscsi_set_default_login_params(&ihp->hba_params); 512 iscsi_set_default_tunable_params( 513 &ihp->hba_tunable_params); 514 515 /* setup minimal initiator params */ 516 iscsid_set_default_initiator_node_settings(ihp, B_TRUE); 517 518 /* hba set up */ 519 tran->tran_hba_private = ihp; 520 tran->tran_tgt_private = NULL; 521 tran->tran_tgt_init = iscsi_tran_lun_init; 522 tran->tran_tgt_probe = iscsi_tran_lun_probe; 523 tran->tran_tgt_free = iscsi_tran_lun_free; 524 tran->tran_start = iscsi_tran_start; 525 tran->tran_abort = iscsi_tran_abort; 526 tran->tran_reset = iscsi_tran_reset; 527 tran->tran_getcap = iscsi_tran_getcap; 528 tran->tran_setcap = iscsi_tran_setcap; 529 tran->tran_init_pkt = iscsi_tran_init_pkt; 530 tran->tran_destroy_pkt = iscsi_tran_destroy_pkt; 531 tran->tran_dmafree = iscsi_tran_dmafree; 532 tran->tran_sync_pkt = iscsi_tran_sync_pkt; 533 tran->tran_reset_notify = iscsi_tran_reset_notify; 534 tran->tran_bus_config = iscsi_tran_bus_config; 535 tran->tran_bus_unconfig = iscsi_tran_bus_unconfig; 536 537 tran->tran_get_name = iscsi_tran_get_name; 538 tran->tran_get_bus_addr = iscsi_tran_get_bus_addr; 539 tran->tran_interconnect_type = INTERCONNECT_ISCSI; 540 541 /* register scsi hba with scsa */ 542 if (scsi_hba_attach_setup(dip, &iscsi_dma_attr, 543 tran, SCSI_HBA_TRAN_CLONE) != DDI_SUCCESS) { 544 goto iscsi_attach_failed1; 545 } 546 547 /* register scsi hba with mdi (MPxIO/vhci) */ 548 if (mdi_phci_register(MDI_HCI_CLASS_SCSI, dip, 0) != 549 MDI_SUCCESS) { 550 ihp->hba_mpxio_enabled = B_FALSE; 551 } else { 552 ihp->hba_mpxio_enabled = B_TRUE; 553 } 554 555 (void) iscsi_hba_kstat_init(ihp); 556 557 /* Initialize targetparam list */ 558 iscsi_targetparam_init(); 559 560 /* Initialize ISID */ 561 ihp->hba_isid[0] = ISCSI_SUN_ISID_0; 562 ihp->hba_isid[1] = ISCSI_SUN_ISID_1; 563 ihp->hba_isid[2] = ISCSI_SUN_ISID_2; 564 ihp->hba_isid[3] = ISCSI_SUN_ISID_3; 565 ihp->hba_isid[4] = ISCSI_SUN_ISID_4; 566 ihp->hba_isid[5] = ISCSI_SUN_ISID_5; 567 568 /* Setup iSNS transport services and client */ 569 isns_client_init(); 570 571 /* 572 * initialize persistent store, 573 * or boot target info in case of iscsi boot 574 */ 575 ihp->hba_persistent_loaded = B_FALSE; 576 if (iscsid_init(ihp) == B_FALSE) { 577 goto iscsi_attach_failed0; 578 } 579 580 /* Setup init_port_name for MPAPI */ 581 (void) snprintf(init_port_name, MAX_NAME_PROP_SIZE, 582 "%s,%02x%02x%02x%02x%02x%02x", 583 (char *)ihp->hba_name, ihp->hba_isid[0], 584 ihp->hba_isid[1], ihp->hba_isid[2], 585 ihp->hba_isid[3], ihp->hba_isid[4], 586 ihp->hba_isid[5]); 587 588 if (ddi_prop_update_string(DDI_DEV_T_NONE, dip, 589 SCSI_ADDR_PROP_INITIATOR_PORT, init_port_name) != 590 DDI_PROP_SUCCESS) { 591 cmn_err(CE_WARN, "iscsi_attach: Creating " 592 SCSI_ADDR_PROP_INITIATOR_PORT 593 " property on iSCSI " 594 "HBA(%s) with dip(%d) Failed", 595 (char *)ihp->hba_name, 596 ddi_get_instance(dip)); 597 } 598 599 ddi_report_dev(dip); 600 } else { 601 rval = DDI_FAILURE; 602 } 603 break; 604 605 iscsi_attach_failed0: 606 isns_client_cleanup(); 607 if (ihp->stats.ks) { 608 (void) iscsi_hba_kstat_term(ihp); 609 } 610 if (ihp->hba_mpxio_enabled == B_TRUE) { 611 (void) mdi_phci_unregister(dip, 0); 612 } 613 (void) scsi_hba_detach(ihp->hba_dip); 614 iscsi_attach_failed1: 615 ddi_remove_minor_node(dip, NULL); 616 ddi_prop_remove_all(ihp->hba_dip); 617 scsi_hba_tran_free(tran); 618 iscsi_attach_failed2: 619 cv_destroy(&ihp->hba_service_cv); 620 mutex_destroy(&ihp->hba_service_lock); 621 mutex_destroy(&ihp->hba_discovery_events_mutex); 622 sema_destroy(&ihp->hba_sendtgts_semaphore); 623 rw_destroy(&ihp->hba_sess_list_rwlock); 624 ddi_soft_state_free(iscsi_state, instance); 625 rval = DDI_FAILURE; 626 break; 627 628 case DDI_RESUME: 629 break; 630 631 default: 632 rval = DDI_FAILURE; 633 } 634 635 if (rval != DDI_SUCCESS) { 636 cmn_err(CE_WARN, "iscsi driver unable to attach " 637 "hba instance %d", instance); 638 } 639 640 return (rval); 641 } 642 643 /* 644 * iscsi_detach - called on unload of hba instance 645 */ 646 static int 647 iscsi_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) 648 { 649 int rval = DDI_SUCCESS; 650 scsi_hba_tran_t *tran = NULL; 651 iscsi_hba_t *ihp = NULL; 652 iscsi_hba_t *ihp_check = NULL; 653 int instance; 654 char *init_node_name; 655 656 instance = ddi_get_instance(dip); 657 658 switch (cmd) { 659 case DDI_DETACH: 660 if (!(tran = (scsi_hba_tran_t *)ddi_get_driver_private(dip))) { 661 rval = DDI_SUCCESS; 662 break; 663 } 664 665 if ((ihp = (iscsi_hba_t *)tran->tran_hba_private) == NULL) { 666 rval = DDI_FAILURE; 667 break; 668 } 669 670 /* 671 * Validate that what is stored by the DDI framework is still 672 * the same state structure referenced by the SCSI framework 673 */ 674 ihp_check = ddi_get_soft_state(iscsi_state, instance); 675 if (ihp_check != ihp) { 676 rval = DDI_FAILURE; 677 break; 678 } 679 680 /* If a session exists we can't safely detach */ 681 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 682 if (ihp->hba_sess_list != NULL) { 683 rw_exit(&ihp->hba_sess_list_rwlock); 684 rval = DDI_FAILURE; 685 break; 686 } 687 rw_exit(&ihp->hba_sess_list_rwlock); 688 689 /* Disable all discovery services */ 690 if (iscsid_disable_discovery(ihp, 691 ISCSI_ALL_DISCOVERY_METHODS) == B_FALSE) { 692 /* Disable failed. Fail detach */ 693 rval = DDI_FAILURE; 694 break; 695 } 696 697 /* Deregister from iSNS server(s). */ 698 init_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 699 if (persistent_initiator_name_get(init_node_name, 700 ISCSI_MAX_NAME_LEN) == B_TRUE) { 701 if (strlen(init_node_name) > 0) { 702 (void) isns_dereg(ihp->hba_isid, 703 (uint8_t *)init_node_name); 704 } 705 } 706 kmem_free(init_node_name, ISCSI_MAX_NAME_LEN); 707 init_node_name = NULL; 708 709 /* Cleanup iSNS Client */ 710 isns_client_cleanup(); 711 712 iscsi_targetparam_cleanup(); 713 714 /* Cleanup iscsid resources */ 715 iscsid_fini(); 716 717 if (rval != DDI_SUCCESS) { 718 break; 719 } 720 /* kstat hba. destroy */ 721 KSTAT_DEC_HBA_CNTR_SESS(ihp); 722 723 if (ihp->hba_mpxio_enabled == B_TRUE) { 724 (void) mdi_phci_unregister(dip, 0); 725 } 726 ddi_remove_minor_node(dip, NULL); 727 728 ddi_prop_remove_all(ihp->hba_dip); 729 730 ldi_ident_release(ihp->hba_li); 731 732 cv_destroy(&ihp->hba_service_cv); 733 mutex_destroy(&ihp->hba_service_lock); 734 mutex_destroy(&ihp->hba_discovery_events_mutex); 735 rw_destroy(&ihp->hba_sess_list_rwlock); 736 (void) iscsi_hba_kstat_term(ihp); 737 738 (void) scsi_hba_detach(dip); 739 if (tran != NULL) { 740 scsi_hba_tran_free(tran); 741 } 742 ddi_soft_state_free(iscsi_state, instance); 743 break; 744 default: 745 break; 746 } 747 748 if (rval != DDI_SUCCESS) { 749 cmn_err(CE_WARN, "iscsi driver unable to " 750 "detach hba instance %d", instance); 751 } 752 753 return (rval); 754 } 755 756 /* 757 * +--------------------------------------------------------------------+ 758 * | End of dev_ops routines | 759 * +--------------------------------------------------------------------+ 760 */ 761 762 /* 763 * +--------------------------------------------------------------------+ 764 * | scsi_tran(9E) routines | 765 * +--------------------------------------------------------------------+ 766 */ 767 768 /* 769 * iscsi_tran_lun_init - Find target device based on SCSI device 770 * Based on the information given (SCSI device, target dev_info) find 771 * the target iSCSI device and put a pointer to that information in 772 * the scsi_hba_tran_t structure. 773 */ 774 static int 775 iscsi_tran_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 776 scsi_hba_tran_t *hba_tran, struct scsi_device *sd) 777 { 778 int rval = 0; 779 int type = 0; 780 781 ASSERT(hba_tran->tran_hba_private != NULL); 782 783 /* 784 * Child node is getting initialized. Look at the mpxio component 785 * type on the child device to see if this device is mpxio managed 786 * or not. 787 */ 788 type = mdi_get_component_type(lun_dip); 789 if (type != MDI_COMPONENT_CLIENT) { 790 rval = iscsi_phys_lun_init(hba_dip, lun_dip, hba_tran, sd); 791 } else { 792 rval = iscsi_virt_lun_init(hba_dip, lun_dip, hba_tran, sd); 793 } 794 795 return (rval); 796 } 797 798 /* 799 * iscsi_tran_lun_probe - This function didn't need to be implemented. 800 * We could have left NULL in the tran table. Since this isn't a 801 * performance path this seems safe. We are just wrappering the 802 * function so we can see the call go through if we have debugging 803 * enabled. 804 */ 805 static int 806 iscsi_tran_lun_probe(struct scsi_device *sd, int (*callback) ()) 807 { 808 int rval = 0; 809 810 rval = scsi_hba_probe(sd, callback); 811 812 return (rval); 813 } 814 815 /* 816 * iscsi_init_pkt - Allocate SCSI packet and fill in required info. 817 */ 818 /* ARGSUSED */ 819 static struct scsi_pkt * 820 iscsi_tran_init_pkt(struct scsi_address *ap, struct scsi_pkt *pkt, 821 struct buf *bp, int cmdlen, int statuslen, int tgtlen, int flags, 822 int (*callback) (), caddr_t arg) 823 { 824 iscsi_lun_t *ilp; 825 iscsi_cmd_t *icmdp; 826 827 ASSERT(ap != NULL); 828 ASSERT(callback == NULL_FUNC || callback == SLEEP_FUNC); 829 830 /* 831 * The software stack doesn't have DMA which means the iSCSI 832 * protocol layer will be doing a bcopy from bp to outgoing 833 * streams buffers. Make sure that the buffer is mapped in 834 * so that the copy won't panic the system. 835 */ 836 if (bp && (bp->b_bcount != 0) && 837 bp_mapin_common(bp, (callback == NULL_FUNC) ? 838 VM_NOSLEEP : VM_SLEEP) == NULL) { 839 return (NULL); 840 } 841 842 ilp = (iscsi_lun_t *)ap->a_hba_tran->tran_tgt_private; 843 ASSERT(ilp != NULL); 844 845 if (pkt == NULL) { 846 pkt = scsi_hba_pkt_alloc(ilp->lun_sess->sess_hba->hba_dip, 847 ap, cmdlen, statuslen, tgtlen, sizeof (iscsi_cmd_t), 848 callback, arg); 849 if (pkt == NULL) { 850 return (NULL); 851 } 852 icmdp = (iscsi_cmd_t *)pkt->pkt_ha_private; 853 icmdp->cmd_sig = ISCSI_SIG_CMD; 854 icmdp->cmd_state = ISCSI_CMD_STATE_FREE; 855 icmdp->cmd_lun = ilp; 856 icmdp->cmd_type = ISCSI_CMD_TYPE_SCSI; 857 /* add the report lun addressing type on to the lun */ 858 icmdp->cmd_un.scsi.lun = ilp->lun_addr_type << 14; 859 icmdp->cmd_un.scsi.lun = icmdp->cmd_un.scsi.lun | 860 ilp->lun_num; 861 icmdp->cmd_un.scsi.pkt = pkt; 862 icmdp->cmd_un.scsi.bp = bp; 863 icmdp->cmd_un.scsi.cmdlen = cmdlen; 864 icmdp->cmd_un.scsi.statuslen = statuslen; 865 icmdp->cmd_crc_error_seen = B_FALSE; 866 icmdp->cmd_misc_flags = 0; 867 if (flags & PKT_XARQ) { 868 icmdp->cmd_misc_flags |= ISCSI_CMD_MISCFLAG_XARQ; 869 } 870 871 872 idm_sm_audit_init(&icmdp->cmd_state_audit); 873 874 mutex_init(&icmdp->cmd_mutex, NULL, MUTEX_DRIVER, NULL); 875 cv_init(&icmdp->cmd_completion, NULL, CV_DRIVER, NULL); 876 877 pkt->pkt_address = *ap; 878 pkt->pkt_comp = (void (*)())NULL; 879 pkt->pkt_flags = 0; 880 pkt->pkt_time = 0; 881 pkt->pkt_resid = 0; 882 pkt->pkt_statistics = 0; 883 pkt->pkt_reason = 0; 884 } 885 return (pkt); 886 } 887 888 /* 889 * iscsi_tran_lun_free - Free a SCSI LUN 890 */ 891 static void 892 iscsi_tran_lun_free(dev_info_t *hba_dip, dev_info_t *lun_dip, 893 scsi_hba_tran_t *hba_tran, struct scsi_device *sd) 894 { 895 iscsi_lun_t *ilp = NULL; 896 897 ASSERT(hba_dip != NULL); 898 ASSERT(lun_dip != NULL); 899 ASSERT(hba_tran != NULL); 900 ASSERT(sd != NULL); 901 ilp = (iscsi_lun_t *)hba_tran->tran_tgt_private; 902 ASSERT(ilp != NULL); 903 904 (void) mdi_prop_remove(ilp->lun_pip, NULL); 905 } 906 907 /* 908 * iscsi_start -- Start a SCSI transaction based on the packet 909 * This will attempt to add the icmdp to the pending queue 910 * for the connection and kick the queue. If the enqueue 911 * fails that means the queue is full. 912 */ 913 static int 914 iscsi_tran_start(struct scsi_address *ap, struct scsi_pkt *pkt) 915 { 916 iscsi_lun_t *ilp = NULL; 917 iscsi_sess_t *isp = NULL; 918 iscsi_cmd_t *icmdp = NULL; 919 uint_t flags; 920 921 ASSERT(ap != NULL); 922 ASSERT(pkt != NULL); 923 ilp = (iscsi_lun_t *)ap->a_hba_tran->tran_tgt_private; 924 isp = (iscsi_sess_t *)ilp->lun_sess; 925 icmdp = (iscsi_cmd_t *)pkt->pkt_ha_private; 926 flags = pkt->pkt_flags; 927 ASSERT(ilp != NULL); 928 ASSERT(isp != NULL); 929 ASSERT(icmdp != NULL); 930 931 /* 932 * If the session is in the FREE state then 933 * all connections are down and retries have 934 * been exhausted. Fail command with fatal error. 935 */ 936 mutex_enter(&isp->sess_state_mutex); 937 if (isp->sess_state == ISCSI_SESS_STATE_FREE) { 938 mutex_exit(&isp->sess_state_mutex); 939 return (TRAN_FATAL_ERROR); 940 } 941 942 /* 943 * If the session is not in LOGGED_IN then we have 944 * no connections LOGGED_IN, but we haven't exhuasted 945 * our retries. Fail the command with busy so the 946 * caller might try again later. Once retries are 947 * exhausted the state machine will move us to FREE. 948 */ 949 if (isp->sess_state != ISCSI_SESS_STATE_LOGGED_IN) { 950 mutex_exit(&isp->sess_state_mutex); 951 return (TRAN_BUSY); 952 } 953 954 /* 955 * If we haven't received data from the target in the 956 * max specified period something is wrong with the 957 * transport. Fail IO with FATAL_ERROR. 958 */ 959 if (isp->sess_rx_lbolt + SEC_TO_TICK(iscsi_rx_max_window) < 960 ddi_get_lbolt()) { 961 mutex_exit(&isp->sess_state_mutex); 962 return (TRAN_FATAL_ERROR); 963 } 964 965 /* 966 * If we haven't received data from the target in the 967 * specified period something is probably wrong with 968 * the transport. Just return back BUSY until either 969 * the problem is resolved of the transport fails. 970 */ 971 if (isp->sess_rx_lbolt + SEC_TO_TICK(iscsi_rx_window) < 972 ddi_get_lbolt()) { 973 mutex_exit(&isp->sess_state_mutex); 974 return (TRAN_BUSY); 975 } 976 977 978 /* reset cmd values in case upper level driver is retrying cmd */ 979 icmdp->cmd_prev = icmdp->cmd_next = NULL; 980 icmdp->cmd_crc_error_seen = B_FALSE; 981 icmdp->cmd_lbolt_pending = icmdp->cmd_lbolt_active = 982 icmdp->cmd_lbolt_aborting = icmdp->cmd_lbolt_timeout = 983 (clock_t)NULL; 984 icmdp->cmd_itt = icmdp->cmd_ttt = 0; 985 icmdp->cmd_un.scsi.abort_icmdp = NULL; 986 987 mutex_enter(&isp->sess_queue_pending.mutex); 988 iscsi_cmd_state_machine(icmdp, ISCSI_CMD_EVENT_E1, isp); 989 mutex_exit(&isp->sess_queue_pending.mutex); 990 mutex_exit(&isp->sess_state_mutex); 991 992 /* 993 * If this packet doesn't have FLAG_NOINTR set, it could have 994 * already run to completion (and the memory freed) at this 995 * point, so check our local copy of pkt_flags. Otherwise we 996 * have to wait for completion before returning to the caller. 997 */ 998 if (flags & FLAG_NOINTR) { 999 mutex_enter(&icmdp->cmd_mutex); 1000 while ((icmdp->cmd_state != ISCSI_CMD_STATE_COMPLETED) || 1001 (icmdp->cmd_un.scsi.r2t_icmdp != NULL) || 1002 (icmdp->cmd_un.scsi.abort_icmdp != NULL) || 1003 (icmdp->cmd_un.scsi.r2t_more == B_TRUE)) { 1004 cv_wait(&icmdp->cmd_completion, &icmdp->cmd_mutex); 1005 } 1006 icmdp->cmd_state = ISCSI_CMD_STATE_FREE; 1007 mutex_exit(&icmdp->cmd_mutex); 1008 } 1009 1010 return (TRAN_ACCEPT); 1011 } 1012 1013 /* 1014 * iscsi_tran_abort - Called when an upper level application 1015 * or driver wants to kill a scsi_pkt that was already sent to 1016 * this driver. 1017 */ 1018 /* ARGSUSED */ 1019 static int 1020 iscsi_tran_abort(struct scsi_address *ap, struct scsi_pkt *pkt) 1021 { 1022 return (0); 1023 } 1024 1025 /* 1026 * iscsi_tran_reset - Reset target at either BUS, TARGET, or LUN 1027 * level. This will require the issuing of a task management 1028 * command down to the target/lun. 1029 */ 1030 static int 1031 iscsi_tran_reset(struct scsi_address *ap, int level) 1032 { 1033 int rval = ISCSI_STATUS_INTERNAL_ERROR; 1034 iscsi_sess_t *isp = NULL; 1035 iscsi_lun_t *ilp = NULL; 1036 1037 ilp = (iscsi_lun_t *)ap->a_hba_tran->tran_tgt_private; 1038 ASSERT(ilp != NULL); 1039 isp = ilp->lun_sess; 1040 ASSERT(isp != NULL); 1041 1042 switch (level) { 1043 case RESET_LUN: 1044 /* reset attempt will block until attempt is complete */ 1045 rval = iscsi_handle_reset(isp, level, ilp); 1046 break; 1047 case RESET_BUS: 1048 /* 1049 * What are we going to realy reset the ethernet 1050 * network!? Just fall through to a target reset. 1051 */ 1052 case RESET_TARGET: 1053 /* reset attempt will block until attempt is complete */ 1054 rval = iscsi_handle_reset(isp, level, NULL); 1055 break; 1056 case RESET_ALL: 1057 default: 1058 break; 1059 } 1060 1061 return (ISCSI_SUCCESS(rval) ? 1 : 0); 1062 } 1063 1064 /* 1065 * iscsi_tran_getcap - Get target/lun capabilities. 1066 */ 1067 static int 1068 iscsi_tran_getcap(struct scsi_address *ap, char *cap, int whom) 1069 { 1070 return (iscsi_i_commoncap(ap, cap, 0, whom, 0)); 1071 } 1072 1073 1074 /* 1075 * iscsi_tran_setcap - Set target/lun capabilities. 1076 */ 1077 /* ARGSUSED */ 1078 static int 1079 iscsi_tran_setcap(struct scsi_address *ap, char *cap, int value, int whom) 1080 { 1081 return (iscsi_i_commoncap(ap, cap, value, whom, 1)); 1082 } 1083 1084 1085 /* 1086 * iscsi_tran_destroy_pkt - Clean up packet 1087 */ 1088 static void 1089 iscsi_tran_destroy_pkt(struct scsi_address *ap, struct scsi_pkt *pkt) 1090 { 1091 iscsi_cmd_t *icmdp; 1092 1093 icmdp = (iscsi_cmd_t *)pkt->pkt_ha_private; 1094 1095 ASSERT(icmdp != NULL); 1096 ASSERT(icmdp->cmd_sig == ISCSI_SIG_CMD); 1097 ASSERT(icmdp->cmd_state == ISCSI_CMD_STATE_FREE); 1098 1099 mutex_destroy(&icmdp->cmd_mutex); 1100 cv_destroy(&icmdp->cmd_completion); 1101 scsi_hba_pkt_free(ap, pkt); 1102 } 1103 1104 /* 1105 * iscsi_tran_dmafree - This is a software driver, NO DMA 1106 */ 1107 /* ARGSUSED */ 1108 static void 1109 iscsi_tran_dmafree(struct scsi_address *ap, struct scsi_pkt *pkt) 1110 { 1111 /* 1112 * The iSCSI interface doesn't deal with DMA 1113 */ 1114 } 1115 1116 /* 1117 * iscsi_tran_sync_pkt - This is a software driver, NO DMA 1118 */ 1119 /* ARGSUSED */ 1120 static void 1121 iscsi_tran_sync_pkt(struct scsi_address *ap, struct scsi_pkt *pkt) 1122 { 1123 /* 1124 * The iSCSI interface doesn't deal with DMA 1125 */ 1126 } 1127 1128 /* 1129 * iscsi_tran_reset_notify - We don't support BUS_RESET so there 1130 * is no point in support callback. 1131 */ 1132 /* ARGSUSED */ 1133 static int 1134 iscsi_tran_reset_notify(struct scsi_address *ap, int flag, 1135 void (*callback) (caddr_t), caddr_t arg) 1136 { 1137 1138 /* 1139 * We never do BUS_RESETS so allowing this call 1140 * back to register has no point? 1141 */ 1142 return (DDI_SUCCESS); 1143 } 1144 1145 1146 /* 1147 * iscsi_tran_bus_config - on demand device configuration 1148 * 1149 * iscsi_tran_bus_config is called by the NDI layer at the completion 1150 * of a dev_node creation. There are two primary cases defined in this 1151 * function. The first is BUS_CONFIG_ALL. In this case the NDI is trying 1152 * to identify that targets/luns are available configured at that point 1153 * in time. It is safe to just complete the process succcessfully. The 1154 * second case is a new case that was defined in S10 for devfs. BUS_CONFIG_ONE 1155 * this is to help driver the top down discovery instead of bottom up. If 1156 * we receive a BUS_CONFIG_ONE we should check to see if the <addr> exists 1157 * if so complete successfull processing. Otherwise we should call the 1158 * deamon and see if we can plumb the <addr>. If it is possible to plumb the 1159 * <addr> block until plumbing is complete. In both cases of being able to 1160 * plumb <addr> or not continue with successfull processing. 1161 */ 1162 static int 1163 iscsi_tran_bus_config(dev_info_t *parent, uint_t flags, 1164 ddi_bus_config_op_t op, void *arg, dev_info_t **childp) 1165 { 1166 int rval = NDI_SUCCESS; 1167 iscsi_hba_t *ihp = NULL; 1168 int iflags = flags; 1169 char *name = NULL; 1170 char *ptr = NULL; 1171 boolean_t config_root = B_FALSE; 1172 1173 /* get reference to soft state */ 1174 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state, 1175 ddi_get_instance(parent)); 1176 if (ihp == NULL) { 1177 return (NDI_FAILURE); 1178 } 1179 1180 iscsi_check_miniroot(ihp); 1181 if ((modrootloaded == 0) && (iscsiboot_prop != NULL)) { 1182 config_root = B_TRUE; 1183 } 1184 1185 if (config_root == B_FALSE) { 1186 if (iscsi_client_request_service(ihp) == B_FALSE) { 1187 return (NDI_FAILURE); 1188 } 1189 } 1190 1191 /* lock so only one config operation occrs */ 1192 sema_p(&iscsid_config_semaphore); 1193 1194 switch (op) { 1195 case BUS_CONFIG_ONE: 1196 /* parse target name out of name given */ 1197 if ((ptr = strchr((char *)arg, '@')) == NULL) { 1198 rval = NDI_FAILURE; 1199 break; 1200 } 1201 ptr++; /* move past '@' */ 1202 name = kmem_zalloc(MAX_GET_NAME_SIZE, KM_SLEEP); 1203 (void) strncpy(name, ptr, MAX_GET_NAME_SIZE); 1204 /* We need to strip the LUN */ 1205 if ((ptr = strchr(name, ',')) == NULL) { 1206 rval = NDI_FAILURE; 1207 kmem_free(name, MAX_GET_NAME_SIZE); 1208 name = NULL; 1209 break; 1210 } 1211 /* We also need to strip the 4 bytes of hex TPGT */ 1212 ptr -= 4; 1213 if (ptr <= name) { 1214 rval = NDI_FAILURE; 1215 kmem_free(name, MAX_GET_NAME_SIZE); 1216 name = NULL; 1217 break; 1218 } 1219 *ptr = '\0'; /* NULL terminate */ 1220 1221 /* translate name back to original iSCSI name */ 1222 iscsi_get_name_to_iqn(name, MAX_GET_NAME_SIZE); 1223 1224 /* configure target, skip 4 byte ISID */ 1225 iscsid_config_one(ihp, (name+4), B_TRUE); 1226 1227 kmem_free(name, MAX_GET_NAME_SIZE); 1228 name = NULL; 1229 1230 /* 1231 * DDI group instructed us to use this flag. 1232 */ 1233 iflags |= NDI_MDI_FALLBACK; 1234 break; 1235 case BUS_CONFIG_DRIVER: 1236 /* FALLTHRU */ 1237 case BUS_CONFIG_ALL: 1238 iscsid_config_all(ihp, B_TRUE); 1239 break; 1240 default: 1241 rval = NDI_FAILURE; 1242 break; 1243 } 1244 1245 if (rval == NDI_SUCCESS) { 1246 rval = ndi_busop_bus_config(parent, iflags, 1247 op, arg, childp, 0); 1248 } 1249 sema_v(&iscsid_config_semaphore); 1250 1251 if (config_root == B_FALSE) { 1252 iscsi_client_release_service(ihp); 1253 } 1254 1255 return (rval); 1256 } 1257 1258 /* 1259 * iscsi_tran_bus_unconfig - on demand device unconfiguration 1260 * 1261 * Called by the os framework under low resource situations. 1262 * It will attempt to unload our minor nodes (logical units 1263 * ndi/mdi nodes). 1264 */ 1265 static int 1266 iscsi_tran_bus_unconfig(dev_info_t *parent, uint_t flag, 1267 ddi_bus_config_op_t op, void *arg) 1268 { 1269 int rval = NDI_SUCCESS; 1270 iscsi_hba_t *ihp = NULL; 1271 1272 /* get reference to soft state */ 1273 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state, 1274 ddi_get_instance(parent)); 1275 if (ihp == NULL) { 1276 return (NDI_FAILURE); 1277 } 1278 1279 if (iscsi_client_request_service(ihp) == B_FALSE) { 1280 return (NDI_FAILURE); 1281 } 1282 1283 rval = ndi_busop_bus_unconfig(parent, flag, op, arg); 1284 1285 iscsi_client_release_service(ihp); 1286 1287 return (rval); 1288 } 1289 1290 1291 /* 1292 * iscsi_tran_get_name - create private /devices name for LUN 1293 * 1294 * This creates the <addr> in /devices/iscsi/<driver>@<addr> 1295 * path. For this <addr> we return the <session/target_name>,<lun num> 1296 * Where <target_name> is an <iqn/eui/...> as defined by the iSCSI 1297 * specification. We do modify the name slightly so that it still 1298 * complies with the IEEE <addr> naming scheme. This means that we 1299 * will substitute out the ':', '@', ... and other reserved characters 1300 * defined in the IEEE definition with '%<hex value of special char>' 1301 * This routine is indirectly called by iscsi_lun_create_xxx. These 1302 * calling routines must prevent the session and lun lists from changing 1303 * during this routine. 1304 */ 1305 static int 1306 iscsi_tran_get_name(struct scsi_device *sd, char *name, int len) 1307 { 1308 int target = 0; 1309 int lun = 0; 1310 iscsi_hba_t *ihp = NULL; 1311 iscsi_sess_t *isp = NULL; 1312 iscsi_lun_t *ilp = NULL; 1313 dev_info_t *lun_dip = NULL; 1314 1315 ASSERT(sd != NULL); 1316 ASSERT(name != NULL); 1317 lun_dip = sd->sd_dev; 1318 ASSERT(lun_dip != NULL); 1319 1320 /* get reference to soft state */ 1321 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state, 1322 ddi_get_instance(ddi_get_parent(lun_dip))); 1323 if (ihp == NULL) { 1324 name[0] = '\0'; 1325 return (0); 1326 } 1327 1328 /* Get the target num */ 1329 target = ddi_prop_get_int(DDI_DEV_T_ANY, sd->sd_dev, 1330 DDI_PROP_DONTPASS, TARGET_PROP, 0); 1331 1332 /* Get the target num */ 1333 lun = ddi_prop_get_int(DDI_DEV_T_ANY, sd->sd_dev, 1334 DDI_PROP_DONTPASS, LUN_PROP, 0); 1335 1336 /* 1337 * Now we need to find our ilp by walking the lists 1338 * off the ihp and isp. 1339 */ 1340 /* See if we already created this session */ 1341 1342 /* Walk the HBA's session list */ 1343 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) { 1344 /* compare target name as the unique identifier */ 1345 if (target == isp->sess_oid) { 1346 /* found match */ 1347 break; 1348 } 1349 } 1350 1351 /* If we found matching session continue searching for tgt */ 1352 if (isp == NULL) { 1353 /* sess not found */ 1354 name[0] = '\0'; 1355 return (0); 1356 } 1357 1358 /* 1359 * Search for the matching iscsi lun structure. We don't 1360 * need to hold the READER for the lun list at this point. 1361 * because the tran_get_name is being called from the online 1362 * function which is already holding a reader on the lun 1363 * list. 1364 */ 1365 for (ilp = isp->sess_lun_list; ilp; ilp = ilp->lun_next) { 1366 if (lun == ilp->lun_num) { 1367 /* found match */ 1368 break; 1369 } 1370 } 1371 1372 if (ilp == NULL) { 1373 /* tgt not found */ 1374 name[0] = '\0'; 1375 return (0); 1376 } 1377 1378 /* Ensure enough space for lun_addr is available */ 1379 ASSERT(ilp->lun_addr != NULL); 1380 if ((strlen(ilp->lun_addr) + 1) > len) { 1381 return (0); 1382 } 1383 1384 /* copy lun_addr name */ 1385 (void) strcpy(name, ilp->lun_addr); 1386 1387 /* 1388 * Based on IEEE-1275 we can't have any ':', ' ', '@', or '/' 1389 * characters in our naming. So replace all those characters 1390 * with '-' 1391 */ 1392 iscsi_get_name_from_iqn(name, len); 1393 1394 return (1); 1395 } 1396 1397 /* 1398 * iscsi_tran_get_bus_addr - This returns a human readable string 1399 * for the bus address. Examining most other drivers fcp, etc. They 1400 * all just return the same string as tran_get_name. In our case 1401 * our tran get name is already some what usable so leave alone. 1402 */ 1403 static int 1404 iscsi_tran_get_bus_addr(struct scsi_device *sd, char *name, int len) 1405 { 1406 return (iscsi_tran_get_name(sd, name, len)); 1407 } 1408 1409 1410 /* 1411 * +--------------------------------------------------------------------+ 1412 * | End of scsi_tran routines | 1413 * +--------------------------------------------------------------------+ 1414 */ 1415 1416 /* 1417 * +--------------------------------------------------------------------+ 1418 * | Start of cb_ops routines | 1419 * +--------------------------------------------------------------------+ 1420 */ 1421 1422 /* 1423 * iscsi_open - Driver should be made IOCTL MT safe. Otherwise 1424 * this function needs updated. 1425 */ 1426 /* ARGSUSED */ 1427 static int 1428 iscsi_open(dev_t *devp, int flags, int otyp, cred_t *credp) 1429 { 1430 return (0); 1431 } 1432 1433 /* 1434 * iscsi_close - 1435 */ 1436 /* ARGSUSED */ 1437 static int 1438 iscsi_close(dev_t dev, int flags, int otyp, cred_t *credp) 1439 { 1440 return (0); 1441 } 1442 1443 /* 1444 * iscsi_ioctl - 1445 */ 1446 /* ARGSUSED */ 1447 static int 1448 iscsi_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, 1449 cred_t *credp, int *rvalp) 1450 { 1451 int rtn = 0; 1452 int instance = 0; 1453 int list_space = 0; 1454 int lun_sz = 0; 1455 int did; 1456 int retry; 1457 iscsi_hba_t *ihp = NULL; 1458 iscsi_sess_t *isp = NULL; 1459 iscsi_conn_t *icp = NULL; 1460 iscsi_login_params_t *params = NULL; 1461 iscsi_login_params_t *tmpParams = NULL; 1462 uchar_t *name = NULL; 1463 dev_info_t *lun_dip = NULL; 1464 1465 entry_t e; 1466 iscsi_oid_t oid; 1467 iscsi_property_t *ipp; 1468 iscsi_static_property_t *ispp; 1469 iscsi_param_get_t *ilg; 1470 iscsi_param_set_t *ils; 1471 iscsi_target_list_t idl, *idlp = NULL; 1472 iscsi_addr_list_t ial, *ialp = NULL; 1473 iscsi_chap_props_t *chap = NULL; 1474 iscsi_radius_props_t *radius = NULL; 1475 iscsi_auth_props_t *auth = NULL; 1476 iscsi_lun_list_t *ll, *llp = NULL; 1477 iscsi_lun_props_t *lun = NULL; 1478 iscsi_lun_t *ilp = NULL; 1479 iSCSIDiscoveryMethod_t method; 1480 iSCSIDiscoveryProperties_t discovery_props; 1481 iscsi_uscsi_t iu; 1482 iscsi_uscsi_t iu_caller; 1483 #ifdef _MULTI_DATAMODEL 1484 /* For use when a 32 bit app makes a call into a 64 bit ioctl */ 1485 iscsi_uscsi32_t iu32_caller; 1486 model_t model; 1487 #endif /* _MULTI_DATAMODEL */ 1488 void *void_p; 1489 iscsi_sendtgts_list_t *stl_hdr; 1490 iscsi_sendtgts_list_t *istl; 1491 int stl_sz; 1492 iscsi_target_entry_t *target; 1493 uint32_t old_oid; 1494 uint32_t target_oid; 1495 iscsi_targetparam_entry_t *curr_entry; 1496 char *initiator_node_name; 1497 char *initiator_node_alias; 1498 isns_portal_group_list_t *pg_list = NULL; 1499 isns_server_portal_group_list_t *server_pg_list_hdr = NULL; 1500 isns_server_portal_group_list_t *server_pg_list = NULL; 1501 int pg_list_sz, pg_sz_copy_out, server_pg_list_sz; 1502 iscsi_config_sess_t *ics; 1503 int size; 1504 boolean_t rval; 1505 char init_port_name[MAX_NAME_PROP_SIZE]; 1506 iscsi_sockaddr_t addr_dsc; 1507 iscsi_boot_property_t *bootProp; 1508 boolean_t discovered = B_TRUE; 1509 iscsi_tunable_object_t *tpsg; 1510 iscsi_tunable_object_t *tpss; 1511 1512 instance = getminor(dev); 1513 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state, instance); 1514 if (ihp == NULL) 1515 return (EFAULT); 1516 1517 iscsi_check_miniroot(ihp); 1518 if ((cmd != ISCSI_SMF_ONLINE) && (cmd != ISCSI_SMF_OFFLINE) && 1519 (cmd != ISCSI_SMF_GET)) { 1520 /* other cmd needs to acquire the service */ 1521 if (iscsi_client_request_service(ihp) == B_FALSE) { 1522 return (EFAULT); 1523 } 1524 } 1525 1526 switch (cmd) { 1527 /* 1528 * ISCSI_CREATE_OID - Create a Object IDentifier for a TargetName 1529 */ 1530 case ISCSI_CREATE_OID: 1531 if (ddi_copyin((caddr_t)arg, &oid, sizeof (oid), mode)) { 1532 rtn = EFAULT; 1533 break; 1534 } 1535 if (oid.o_vers != ISCSI_INTERFACE_VERSION) { 1536 rtn = EINVAL; 1537 break; 1538 } 1539 1540 /* Set the target that this session is associated with */ 1541 oid.o_oid = iscsi_targetparam_get_oid(oid.o_name); 1542 1543 if (ddi_copyout(&oid, (caddr_t)arg, sizeof (oid), mode)) { 1544 rtn = EFAULT; 1545 break; 1546 } 1547 break; 1548 /* 1549 * ISCSI_PARAM_GET - Get param for specified 1550 * connection/session. 1551 */ 1552 case ISCSI_PARAM_GET: 1553 /* copyin user args */ 1554 ilg = (iscsi_param_get_t *)kmem_alloc(sizeof (*ilg), KM_SLEEP); 1555 if (ddi_copyin((caddr_t)arg, ilg, sizeof (*ilg), mode)) { 1556 rtn = EFAULT; 1557 kmem_free(ilg, sizeof (*ilg)); 1558 break; 1559 } 1560 1561 if (ilg->g_vers != ISCSI_INTERFACE_VERSION) { 1562 rtn = EINVAL; 1563 kmem_free(ilg, sizeof (*ilg)); 1564 break; 1565 } 1566 1567 /* handle special case for Initiator name */ 1568 if (ilg->g_param == ISCSI_LOGIN_PARAM_INITIATOR_NAME) { 1569 (void) strlcpy((char *)ilg->g_value.v_name, 1570 (char *)ihp->hba_name, ISCSI_MAX_NAME_LEN); 1571 } else if (ilg->g_param == ISCSI_LOGIN_PARAM_INITIATOR_ALIAS) { 1572 if (ihp->hba_alias_length == 0) { 1573 rtn = EINVAL; 1574 } else { 1575 (void) strlcpy((char *)ilg->g_value.v_name, 1576 (char *)ihp->hba_alias, ISCSI_MAX_NAME_LEN); 1577 } 1578 } else { 1579 /* To describe the validity of the requested param */ 1580 boolean_t valid_flag = B_TRUE; 1581 1582 name = NULL; 1583 1584 /* 1585 * switch login based if looking for initiator 1586 * params 1587 */ 1588 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 1589 if (ilg->g_oid == ihp->hba_oid) { 1590 /* initiator */ 1591 params = &ihp->hba_params; 1592 name = ihp->hba_name; 1593 if (iscsi_get_persisted_param(name, 1594 ilg, params) != 0) { 1595 valid_flag = B_FALSE; 1596 } 1597 } else { 1598 /* 1599 * If the oid does represent a session check 1600 * to see if it is a target oid. If so, 1601 * return the target's associated session. 1602 */ 1603 rtn = iscsi_sess_get(ilg->g_oid, ihp, &isp); 1604 if (rtn != 0) { 1605 rtn = iscsi_sess_get_by_target( 1606 ilg->g_oid, ihp, &isp); 1607 } 1608 1609 /* 1610 * If rtn is zero then we have found an 1611 * existing session. Use the session name to 1612 * do param lookup. If rtn is non-zero then 1613 * create a targetparam object and use its name 1614 * for param lookup. 1615 */ 1616 if (rtn == 0) { 1617 name = isp->sess_name; 1618 params = &isp->sess_params; 1619 } else { 1620 name = 1621 iscsi_targetparam_get_name( 1622 ilg->g_oid); 1623 if (ilg->g_param_type == 1624 ISCSI_SESS_PARAM) { 1625 tmpParams = 1626 (iscsi_login_params_t *) 1627 kmem_alloc( 1628 sizeof (*tmpParams), 1629 KM_SLEEP); 1630 params = tmpParams; 1631 } 1632 rtn = 0; 1633 } 1634 1635 if (name == NULL) { 1636 rw_exit( 1637 &ihp->hba_sess_list_rwlock); 1638 rtn = EFAULT; 1639 kmem_free(ilg, sizeof (*ilg)); 1640 if (tmpParams != NULL) 1641 kmem_free(tmpParams, 1642 sizeof (*tmpParams)); 1643 1644 break; 1645 } 1646 1647 if (ilg->g_param_type == ISCSI_SESS_PARAM) { 1648 /* session */ 1649 /* 1650 * Update sess_params with the 1651 * latest params from the 1652 * persistent store. 1653 */ 1654 if (iscsi_get_persisted_param(name, 1655 ilg, params) != 0) { 1656 /* 1657 * If the parameter in 1658 * question is not 1659 * overriden, no effect 1660 * on existing session 1661 * parameters. However, 1662 * the parameter is 1663 * marked invalid 1664 * (from the standpoint 1665 * of whether it is 1666 * overriden). 1667 */ 1668 valid_flag = B_FALSE; 1669 } 1670 } else if (ilg->g_param_type == 1671 ISCSI_CONN_PARAM && isp != NULL) { 1672 /* connection */ 1673 rw_enter(&isp->sess_conn_list_rwlock, 1674 RW_READER); 1675 /* Assuming 1 conn per sess. */ 1676 /* 1677 * MC/S - Need to be modified to 1678 * take g_conn_cid into account when 1679 * we go multi-connection. 1680 */ 1681 if ((isp->sess_conn_act != NULL) && 1682 (isp->sess_conn_act->conn_state == 1683 ISCSI_CONN_STATE_LOGGED_IN)) { 1684 params = &(isp-> 1685 sess_conn_act-> 1686 conn_params); 1687 } else { 1688 valid_flag = B_FALSE; 1689 } 1690 rw_exit(&isp->sess_conn_list_rwlock); 1691 } 1692 } 1693 1694 /* make sure we have params to get info from */ 1695 if (params) { 1696 rtn = iscsi_get_param(params, valid_flag, ilg); 1697 1698 /* 1699 * for target parameters, check if any 1700 * parameters were overridden at the initiator 1701 * level. If so, then change the default value 1702 * to the initiator's overridden value 1703 */ 1704 if ((rtn == 0) && 1705 (ilg->g_oid != ihp->hba_oid)) { 1706 iscsi_override_target_default(ihp, 1707 ilg); 1708 } 1709 } 1710 rw_exit(&ihp->hba_sess_list_rwlock); 1711 } 1712 1713 if (rtn == 0) { 1714 rtn = ddi_copyout(ilg, (caddr_t)arg, 1715 sizeof (iscsi_param_get_t), mode); 1716 } 1717 kmem_free(ilg, sizeof (*ilg)); 1718 if (tmpParams != NULL) 1719 kmem_free(tmpParams, sizeof (*tmpParams)); 1720 break; 1721 1722 /* 1723 * ISCSI_INIT_NODE_NAME_SET - Change the initiator-node name for 1724 * the specified connection/session. 1725 */ 1726 case ISCSI_INIT_NODE_NAME_SET: 1727 /* copyin user args */ 1728 ils = (iscsi_param_set_t *)kmem_alloc(sizeof (*ils), KM_SLEEP); 1729 if (ddi_copyin((caddr_t)arg, ils, sizeof (*ils), mode)) { 1730 rtn = EFAULT; 1731 kmem_free(ils, sizeof (*ils)); 1732 break; 1733 } 1734 1735 if (ils->s_vers != ISCSI_INTERFACE_VERSION) { 1736 rtn = EINVAL; 1737 kmem_free(ils, sizeof (*ils)); 1738 break; 1739 } 1740 1741 /* saving off the old initiator-node name */ 1742 initiator_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 1743 rval = persistent_initiator_name_get(initiator_node_name, 1744 ISCSI_MAX_NAME_LEN); 1745 1746 rtn = iscsi_set_params(ils, ihp, B_TRUE); 1747 kmem_free(ils, sizeof (*ils)); 1748 if (rtn != 0) { 1749 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 1750 initiator_node_name = NULL; 1751 break; 1752 } 1753 1754 (void) snprintf(init_port_name, MAX_NAME_PROP_SIZE, 1755 "%s,%02x%02x%02x%02x%02x%02x", 1756 (char *)ihp->hba_name, ihp->hba_isid[0], 1757 ihp->hba_isid[1], ihp->hba_isid[2], 1758 ihp->hba_isid[3], ihp->hba_isid[4], 1759 ihp->hba_isid[5]); 1760 1761 if (ddi_prop_update_string(DDI_DEV_T_NONE, 1762 ihp->hba_dip, SCSI_ADDR_PROP_INITIATOR_PORT, 1763 init_port_name) != DDI_PROP_SUCCESS) { 1764 cmn_err(CE_WARN, "iscsi_ioctl: Updating " 1765 SCSI_ADDR_PROP_INITIATOR_PORT " property on iSCSI " 1766 "HBA(%s) with dip(%d) Failed", 1767 (char *)ihp->hba_name, 1768 ddi_get_instance(ihp->hba_dip)); 1769 } 1770 1771 /* 1772 * Deregister the old initiator-node name from the iSNS 1773 * server 1774 * Register the new initiator-node name with the iSNS server 1775 */ 1776 method = persistent_disc_meth_get(); 1777 if (method & iSCSIDiscoveryMethodISNS) { 1778 if (rval == B_TRUE) { 1779 if (strlen(initiator_node_name) > 0) { 1780 /* 1781 * we will attempt to offline the targets. 1782 * if logouts fail, we will still continue 1783 */ 1784 #define STRING_INNO "initiator-node name - Offline " 1785 #define STRING_FFOMD "failed for one or more devices" 1786 if ((iscsid_del( 1787 ihp, NULL, method, NULL)) 1788 != B_TRUE) { 1789 cmn_err(CE_NOTE, 1790 "Attempting to change " 1791 STRING_INNO 1792 STRING_FFOMD); 1793 } 1794 (void) isns_dereg(ihp->hba_isid, 1795 (uint8_t *)initiator_node_name); 1796 #undef STRING_INNO 1797 #undef STRING_FFOMD 1798 } 1799 } 1800 if (persistent_initiator_name_get(initiator_node_name, 1801 ISCSI_MAX_NAME_LEN) != B_TRUE) { 1802 kmem_free(initiator_node_name, 1803 ISCSI_MAX_NAME_LEN); 1804 initiator_node_name = NULL; 1805 rtn = EIO; 1806 break; 1807 } 1808 if (strlen(initiator_node_name) == 0) { 1809 kmem_free(initiator_node_name, 1810 ISCSI_MAX_NAME_LEN); 1811 initiator_node_name = NULL; 1812 rtn = EIO; 1813 break; 1814 } 1815 1816 initiator_node_alias = kmem_zalloc(ISCSI_MAX_NAME_LEN, 1817 KM_SLEEP); 1818 if (persistent_alias_name_get(initiator_node_alias, 1819 ISCSI_MAX_NAME_LEN) != B_TRUE) { 1820 initiator_node_alias[0] = '\0'; 1821 } 1822 1823 (void) isns_reg(ihp->hba_isid, 1824 (uint8_t *)initiator_node_name, 1825 ISCSI_MAX_NAME_LEN, 1826 (uint8_t *)initiator_node_alias, 1827 ISCSI_MAX_NAME_LEN, 1828 ISNS_INITIATOR_NODE_TYPE, 1829 isns_scn_callback); 1830 iscsid_do_isns_query(ihp); 1831 1832 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN); 1833 initiator_node_alias = NULL; 1834 } 1835 1836 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 1837 initiator_node_name = NULL; 1838 break; 1839 1840 /* 1841 * ISCSI_PARAM_SET - Set param for specified connection/session. 1842 */ 1843 case ISCSI_PARAM_SET: 1844 /* copyin user args */ 1845 ils = (iscsi_param_set_t *)kmem_alloc(sizeof (*ils), KM_SLEEP); 1846 if (ddi_copyin((caddr_t)arg, ils, sizeof (*ils), mode)) { 1847 rtn = EFAULT; 1848 kmem_free(ils, sizeof (*ils)); 1849 break; 1850 } 1851 1852 if (ils->s_vers != ISCSI_INTERFACE_VERSION) { 1853 rtn = EINVAL; 1854 kmem_free(ils, sizeof (*ils)); 1855 break; 1856 } 1857 rtn = iscsi_set_params(ils, ihp, B_TRUE); 1858 if (iscsiboot_prop) { 1859 if (iscsi_cmp_boot_sess_oid(ihp, ils->s_oid)) { 1860 /* 1861 * found active session for this object 1862 * or this is initiator's object 1863 * with mpxio enabled 1864 */ 1865 if (!iscsi_reconfig_boot_sess(ihp)) { 1866 rtn = EINVAL; 1867 kmem_free(ils, sizeof (*ils)); 1868 break; 1869 } 1870 } 1871 } 1872 kmem_free(ils, sizeof (*ils)); 1873 break; 1874 1875 /* 1876 * ISCSI_TARGET_PARAM_CLEAR 1877 * - remove custom parameter settings for a target. 1878 */ 1879 case ISCSI_TARGET_PARAM_CLEAR: 1880 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 1881 rtn = EFAULT; 1882 break; 1883 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 1884 rtn = EINVAL; 1885 break; 1886 } 1887 1888 if ((e.e_oid != ihp->hba_oid) && 1889 (e.e_oid != ISCSI_OID_NOTSET)) { 1890 boolean_t rval1, rval2, rval3; 1891 uchar_t *t_name; 1892 iscsi_sess_t *t_isp; 1893 boolean_t t_rtn = B_TRUE; 1894 persistent_param_t t_param; 1895 iscsi_config_sess_t t_ics; 1896 persistent_tunable_param_t t_tpsg; 1897 1898 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 1899 /* 1900 * If the oid does represent a session check to see 1901 * if it is a target oid. If so, return the target's 1902 * associated session. 1903 */ 1904 rtn = iscsi_sess_get(e.e_oid, ihp, &isp); 1905 if (rtn != 0) { 1906 rtn = iscsi_sess_get_by_target(e.e_oid, ihp, 1907 &isp); 1908 } 1909 1910 /* 1911 * If rtn is zero then we have found an 1912 * existing session. Use the session name to 1913 * do param lookup. If rtn is non-zero then 1914 * create a targetparam object and use its name 1915 * for param lookup. 1916 */ 1917 if (rtn == 0) { 1918 t_name = isp->sess_name; 1919 } else { 1920 t_name = iscsi_targetparam_get_name(e.e_oid); 1921 rtn = 0; 1922 } 1923 1924 if (t_name == NULL) { 1925 rw_exit(&ihp->hba_sess_list_rwlock); 1926 rtn = EFAULT; 1927 break; 1928 } 1929 1930 name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 1931 (void) strncpy((char *)name, (char *)t_name, 1932 ISCSI_MAX_NAME_LEN); 1933 1934 t_ics.ics_in = 1; 1935 rval1 = persistent_param_get((char *)name, &t_param); 1936 rval2 = persistent_get_config_session((char *)name, 1937 &t_ics); 1938 rval3 = persistent_get_tunable_param((char *)name, 1939 &t_tpsg); 1940 1941 if ((rval1 == B_FALSE) && (rval2 == B_FALSE) && 1942 (rval3 == B_FALSE)) { 1943 /* no any target parameters get */ 1944 kmem_free(name, ISCSI_MAX_NAME_LEN); 1945 rw_exit(&ihp->hba_sess_list_rwlock); 1946 rtn = EIO; 1947 break; 1948 } 1949 1950 if (persistent_param_clear((char *)name) == B_FALSE) { 1951 kmem_free(name, ISCSI_MAX_NAME_LEN); 1952 rw_exit(&ihp->hba_sess_list_rwlock); 1953 rtn = EIO; 1954 break; 1955 } 1956 1957 ics = kmem_zalloc(sizeof (*ics), KM_SLEEP); 1958 ics->ics_ver = ISCSI_INTERFACE_VERSION; 1959 ics->ics_oid = ISCSI_INITIATOR_OID; 1960 ics->ics_in = 1; 1961 1962 /* 1963 * We may have multiple sessions with different 1964 * tpgt values. So we need to loop through 1965 * the sessions and update all sessions. 1966 */ 1967 for (isp = ihp->hba_sess_list; isp; 1968 isp = t_isp) { 1969 t_isp = isp->sess_next; 1970 1971 if (strncmp((char *)isp->sess_name, 1972 (char *)name, ISCSI_MAX_NAME_LEN) == 0) { 1973 /* 1974 * When removing target-params we need 1975 * slightly different actions depending 1976 * on if the session should still exist. 1977 * Get the initiator-node value for 1978 * MS/T. If there is no initiator 1979 * value then assume the default value 1980 * of 1. If the initiator value is 1981 * less than this ISID then we need to 1982 * destroy the session. Otherwise 1983 * update the session information and 1984 * resync (N7 event). 1985 */ 1986 rtn = iscsi_ioctl_get_config_sess( 1987 ihp, ics); 1988 if (((rtn != 0) && 1989 (isp->sess_isid[5] > 0)) || 1990 ((rtn == 0) && 1991 (ics->ics_out <= 1992 isp->sess_isid[5]))) { 1993 1994 /* 1995 * This session should no 1996 * longer exist. Remove 1997 * session. 1998 */ 1999 if (!ISCSI_SUCCESS( 2000 iscsi_sess_destroy(isp))) { 2001 t_rtn = B_FALSE; 2002 continue; 2003 } 2004 isp = ihp->hba_sess_list; 2005 } else { 2006 /* 2007 * Reset the session 2008 * parameters. 2009 */ 2010 bcopy(&(isp->sess_hba-> 2011 hba_params), 2012 &(isp->sess_params), 2013 sizeof (isp->sess_params)); 2014 if (iscsiboot_prop && 2015 isp->sess_boot) { 2016 /* 2017 * reconfig boot 2018 * session later 2019 */ 2020 continue; 2021 } 2022 /* 2023 * Notify the session that the 2024 * login parameters have 2025 * changed. 2026 */ 2027 mutex_enter(&isp-> 2028 sess_state_mutex); 2029 iscsi_sess_state_machine(isp, 2030 ISCSI_SESS_EVENT_N7); 2031 mutex_exit(&isp-> 2032 sess_state_mutex); 2033 } 2034 } 2035 } 2036 if (t_rtn == B_FALSE) { 2037 boolean_t t_rval = B_TRUE; 2038 /* Failure!, restore target's parameters */ 2039 if (rval1 == B_TRUE) { 2040 rval1 = persistent_param_set( 2041 (char *)name, &t_param); 2042 if (rval1 == B_FALSE) { 2043 t_rval = B_FALSE; 2044 } 2045 } 2046 if (rval2 == B_TRUE) { 2047 rval2 = persistent_set_config_session( 2048 (char *)name, &t_ics); 2049 if (rval2 == B_FALSE) { 2050 t_rval = B_FALSE; 2051 } 2052 } 2053 if (rval3 == B_TRUE) { 2054 rval3 = persistent_set_tunable_param( 2055 (char *)name, &t_tpsg); 2056 if (rval3 == B_FALSE) { 2057 t_rval = B_FALSE; 2058 } 2059 } 2060 if (t_rval == B_FALSE) { 2061 cmn_err(CE_WARN, "Failed to restore " 2062 "target's parameters after remove " 2063 "session related to target " 2064 "parameters failure."); 2065 } 2066 rtn = EBUSY; 2067 } 2068 kmem_free(ics, sizeof (*ics)); 2069 kmem_free(name, ISCSI_MAX_NAME_LEN); 2070 rw_exit(&ihp->hba_sess_list_rwlock); 2071 if (iscsiboot_prop) { 2072 if (iscsi_cmp_boot_sess_oid(ihp, e.e_oid)) { 2073 /* 2074 * found active session for this object 2075 * or this is initiator object 2076 * with mpxio enabled 2077 */ 2078 if (!iscsi_reconfig_boot_sess(ihp)) { 2079 rtn = EINVAL; 2080 break; 2081 } 2082 } 2083 } 2084 } 2085 break; 2086 2087 /* 2088 * ISCSI_TARGET_OID_LIST_GET - 2089 */ 2090 case ISCSI_TARGET_OID_LIST_GET: 2091 /* copyin user args */ 2092 if (ddi_copyin((caddr_t)arg, &idl, 2093 sizeof (idl), mode)) { 2094 rtn = EFAULT; 2095 break; 2096 } 2097 2098 if (idl.tl_vers != ISCSI_INTERFACE_VERSION) { 2099 rtn = EINVAL; 2100 break; 2101 } 2102 2103 list_space = sizeof (iscsi_target_list_t); 2104 if (idl.tl_in_cnt != 0) 2105 list_space += (sizeof (uint32_t) * 2106 (idl.tl_in_cnt - 1)); 2107 2108 idlp = kmem_zalloc(list_space, KM_SLEEP); 2109 bcopy(&idl, idlp, sizeof (idl)); 2110 idlp->tl_out_cnt = 0; 2111 2112 /* 2113 * If target list type is ISCSI_TGT_OID_LIST and discovery 2114 * has not been completed or in progress, poke the discovery 2115 * methods so target information is returned 2116 */ 2117 mutex_enter(&ihp->hba_discovery_events_mutex); 2118 method = ihp->hba_discovery_events; 2119 if ((idl.tl_tgt_list_type == ISCSI_TGT_OID_LIST) && 2120 (method != ISCSI_ALL_DISCOVERY_METHODS) && 2121 (ihp->hba_discovery_in_progress == B_FALSE)) { 2122 ihp->hba_discovery_in_progress = B_TRUE; 2123 mutex_exit(&ihp->hba_discovery_events_mutex); 2124 iscsid_poke_discovery(ihp, iSCSIDiscoveryMethodUnknown); 2125 mutex_enter(&ihp->hba_discovery_events_mutex); 2126 ihp->hba_discovery_in_progress = B_FALSE; 2127 } 2128 mutex_exit(&ihp->hba_discovery_events_mutex); 2129 2130 /* 2131 * Return the correct list information based on the type 2132 */ 2133 switch (idl.tl_tgt_list_type) { 2134 /* ISCSI_TGT_PARAM_OID_LIST - iscsiadm list target-params */ 2135 case ISCSI_TGT_PARAM_OID_LIST: 2136 /* get params from persistent store */ 2137 iscsi_targetparam_lock_list(RW_READER); 2138 curr_entry = iscsi_targetparam_get_next_entry(NULL); 2139 while (curr_entry != NULL) { 2140 if (idlp->tl_out_cnt < idlp->tl_in_cnt) { 2141 idlp->tl_oid_list[idlp->tl_out_cnt] = 2142 curr_entry->target_oid; 2143 } 2144 idlp->tl_out_cnt++; 2145 curr_entry = iscsi_targetparam_get_next_entry( 2146 curr_entry); 2147 } 2148 iscsi_targetparam_unlock_list(); 2149 break; 2150 2151 /* ISCSI_STATIC_TGT_OID_LIST - iscsiadm list static-config */ 2152 case ISCSI_STATIC_TGT_OID_LIST: 2153 { 2154 char *target_name = NULL; 2155 void *v = NULL; 2156 2157 /* get static-config from persistent store */ 2158 target_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 2159 persistent_static_addr_lock(); 2160 while (persistent_static_addr_next(&v, 2161 (char *)target_name, &e) == B_TRUE) { 2162 2163 if (idlp->tl_out_cnt < idlp->tl_in_cnt) { 2164 idlp->tl_oid_list[idlp->tl_out_cnt] = 2165 e.e_oid; 2166 } 2167 idlp->tl_out_cnt++; 2168 2169 } 2170 2171 persistent_static_addr_unlock(); 2172 kmem_free(target_name, ISCSI_MAX_NAME_LEN); 2173 break; 2174 } 2175 2176 /* ISCSI_TGT_OID_LIST - iscsiadm list target */ 2177 case ISCSI_TGT_OID_LIST: 2178 2179 /* get sessions from hba's session list */ 2180 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2181 for (isp = ihp->hba_sess_list; isp; 2182 isp = isp->sess_next) { 2183 2184 if (((isp->sess_state != 2185 ISCSI_SESS_STATE_FREE) || 2186 (isp->sess_discovered_by != 2187 iSCSIDiscoveryMethodUnknown)) && 2188 (isp->sess_type == 2189 ISCSI_SESS_TYPE_NORMAL)) { 2190 if (idlp->tl_out_cnt < 2191 idlp->tl_in_cnt) { 2192 idlp->tl_oid_list[ 2193 idlp->tl_out_cnt] = 2194 isp->sess_oid; 2195 } 2196 idlp->tl_out_cnt++; 2197 } 2198 2199 } 2200 rw_exit(&ihp->hba_sess_list_rwlock); 2201 break; 2202 2203 default: 2204 ASSERT(FALSE); 2205 } 2206 2207 rtn = ddi_copyout(idlp, (caddr_t)arg, list_space, mode); 2208 kmem_free(idlp, list_space); 2209 break; 2210 2211 /* 2212 * ISCSI_TARGET_PROPS_GET - 2213 */ 2214 case ISCSI_TARGET_PROPS_GET: 2215 /* ---- fall through sense the code is almost the same ---- */ 2216 2217 /* 2218 * ISCSI_TARGET_PROPS_SET - 2219 */ 2220 case ISCSI_TARGET_PROPS_SET: 2221 /* copyin user args */ 2222 ipp = (iscsi_property_t *)kmem_alloc(sizeof (*ipp), 2223 KM_SLEEP); 2224 if (ddi_copyin((caddr_t)arg, ipp, sizeof (*ipp), mode)) { 2225 rtn = EFAULT; 2226 kmem_free(ipp, sizeof (*ipp)); 2227 break; 2228 } 2229 2230 if (ipp->p_vers != ISCSI_INTERFACE_VERSION) { 2231 rtn = EINVAL; 2232 kmem_free(ipp, sizeof (*ipp)); 2233 break; 2234 } 2235 2236 rtn = iscsi_target_prop_mod(ihp, ipp, cmd); 2237 if (rtn == 0) 2238 rtn = ddi_copyout(ipp, (caddr_t)arg, 2239 sizeof (*ipp), mode); 2240 kmem_free(ipp, sizeof (*ipp)); 2241 break; 2242 2243 /* 2244 * ISCSI_TARGET_ADDRESS_GET - 2245 */ 2246 case ISCSI_TARGET_ADDRESS_GET: 2247 if (ddi_copyin((caddr_t)arg, &ial, sizeof (ial), mode)) { 2248 rtn = EFAULT; 2249 break; 2250 } 2251 2252 if (ial.al_vers != ISCSI_INTERFACE_VERSION) { 2253 rtn = EINVAL; 2254 break; 2255 } 2256 2257 /* 2258 * Find out how much space we need to malloc for the users 2259 * request. 2260 */ 2261 list_space = sizeof (iscsi_addr_list_t); 2262 if (ial.al_in_cnt != 0) { 2263 list_space += (sizeof (iscsi_addr_t) * 2264 (ial.al_in_cnt - 1)); 2265 } 2266 ialp = (iscsi_addr_list_t *)kmem_zalloc(list_space, KM_SLEEP); 2267 2268 /* Copy in the header portion */ 2269 bcopy(&ial, ialp, sizeof (ial)); 2270 2271 /* session */ 2272 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2273 rtn = iscsi_sess_get(ialp->al_oid, ihp, &isp); 2274 if (rtn != 0) { 2275 rw_exit(&ihp->hba_sess_list_rwlock); 2276 rtn = EFAULT; 2277 break; 2278 } 2279 2280 ialp->al_out_cnt = 0; 2281 ialp->al_tpgt = isp->sess_tpgt_conf; 2282 rw_enter(&isp->sess_conn_list_rwlock, RW_READER); 2283 for (icp = isp->sess_conn_list; icp; icp = icp->conn_next) { 2284 if (icp->conn_state != ISCSI_CONN_STATE_LOGGED_IN) { 2285 continue; 2286 } 2287 if (ialp->al_out_cnt < ialp->al_in_cnt) { 2288 iscsi_addr_t *ap; 2289 2290 ap = &ialp->al_addrs[ialp->al_out_cnt]; 2291 if (icp->conn_base_addr.sin.sa_family 2292 == AF_INET) { 2293 2294 struct sockaddr_in *addr_in = 2295 (struct sockaddr_in *)&icp-> 2296 conn_base_addr.sin4; 2297 ap->a_addr.i_insize = 2298 sizeof (struct in_addr); 2299 bcopy(&addr_in->sin_addr.s_addr, 2300 &ap->a_addr.i_addr.in4.s_addr, 2301 sizeof (struct in_addr)); 2302 ap->a_port = addr_in->sin_port; 2303 2304 } else { 2305 2306 struct sockaddr_in6 *addr_in6 = 2307 (struct sockaddr_in6 *)&icp-> 2308 conn_base_addr.sin6; 2309 ap->a_addr.i_insize = 2310 sizeof (struct in6_addr); 2311 bcopy(&addr_in6->sin6_addr.s6_addr, 2312 &ap->a_addr.i_addr.in6.s6_addr, 2313 sizeof (struct in6_addr)); 2314 ap->a_port = addr_in6->sin6_port; 2315 2316 } 2317 } 2318 ialp->al_out_cnt++; 2319 } 2320 rw_exit(&isp->sess_conn_list_rwlock); 2321 rw_exit(&ihp->hba_sess_list_rwlock); 2322 2323 rtn = ddi_copyout(ialp, (caddr_t)arg, list_space, mode); 2324 kmem_free(ialp, list_space); 2325 break; 2326 2327 /* 2328 * ISCSI_CHAP_SET - 2329 */ 2330 case ISCSI_CHAP_SET: 2331 chap = (iscsi_chap_props_t *)kmem_zalloc(sizeof (*chap), 2332 KM_SLEEP); 2333 if (ddi_copyin((caddr_t)arg, chap, sizeof (*chap), mode)) { 2334 rtn = EFAULT; 2335 kmem_free(chap, sizeof (*chap)); 2336 break; 2337 } else if (chap->c_vers != ISCSI_INTERFACE_VERSION) { 2338 rtn = EINVAL; 2339 kmem_free(chap, sizeof (*chap)); 2340 break; 2341 } 2342 2343 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2344 if (chap->c_oid == ihp->hba_oid) 2345 name = ihp->hba_name; 2346 else { 2347 rtn = iscsi_sess_get(chap->c_oid, ihp, &isp); 2348 if (rtn != 0) { 2349 rtn = iscsi_sess_get_by_target( 2350 chap->c_oid, ihp, &isp); 2351 } 2352 2353 /* 2354 * If rtn is zero then we have found an 2355 * existing session. Use the session name to 2356 * do param lookup. If rtn is non-zero then 2357 * create a targetparam object and use its name 2358 * for param lookup. 2359 */ 2360 if (rtn == 0) { 2361 name = isp->sess_name; 2362 } else { 2363 name = 2364 iscsi_targetparam_get_name(chap->c_oid); 2365 rtn = 0; 2366 } 2367 } 2368 2369 if (name == NULL) { 2370 rw_exit( 2371 &ihp->hba_sess_list_rwlock); 2372 rtn = EFAULT; 2373 kmem_free(chap, sizeof (*chap)); 2374 break; 2375 } 2376 2377 if (persistent_chap_set((char *)name, chap) == 2378 B_FALSE) { 2379 rtn = EIO; 2380 } 2381 rw_exit(&ihp->hba_sess_list_rwlock); 2382 kmem_free(chap, sizeof (*chap)); 2383 break; 2384 2385 /* 2386 * ISCSI_CHAP_GET - 2387 */ 2388 case ISCSI_CHAP_GET: 2389 chap = (iscsi_chap_props_t *)kmem_zalloc(sizeof (*chap), 2390 KM_SLEEP); 2391 if (ddi_copyin((caddr_t)arg, chap, sizeof (*chap), mode)) { 2392 kmem_free(chap, sizeof (*chap)); 2393 rtn = EFAULT; 2394 break; 2395 } else if (chap->c_vers != ISCSI_INTERFACE_VERSION) { 2396 kmem_free(chap, sizeof (*chap)); 2397 rtn = EINVAL; 2398 break; 2399 } 2400 2401 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2402 if (chap->c_oid == ihp->hba_oid) 2403 name = ihp->hba_name; 2404 else { 2405 rtn = iscsi_sess_get(chap->c_oid, ihp, &isp); 2406 if (rtn != 0) { 2407 rtn = iscsi_sess_get_by_target( 2408 chap->c_oid, ihp, &isp); 2409 } 2410 2411 /* 2412 * If rtn is zero then we have found an 2413 * existing session. Use the session name to 2414 * do param lookup. If rtn is non-zero then 2415 * create a targetparam object and use its name 2416 * for param lookup. 2417 */ 2418 if (rtn == 0) { 2419 name = isp->sess_name; 2420 } else { 2421 rtn = 0; 2422 name = 2423 iscsi_targetparam_get_name(chap->c_oid); 2424 } 2425 2426 if (name == NULL) { 2427 rw_exit(&ihp->hba_sess_list_rwlock); 2428 rtn = EFAULT; 2429 break; 2430 } 2431 /* 2432 * Initialize the target-side chap name to the 2433 * session name if no chap settings have been 2434 * saved for the current session. 2435 */ 2436 if (persistent_chap_get((char *)name, 2437 chap) == B_FALSE) { 2438 int name_len = strlen((char *)name); 2439 iscsi_chap_props_t *chap = NULL; 2440 chap = (iscsi_chap_props_t *)kmem_zalloc 2441 (sizeof (iscsi_chap_props_t), KM_SLEEP); 2442 bcopy((char *)name, chap->c_user, name_len); 2443 chap->c_user_len = name_len; 2444 (void) (persistent_chap_set((char *)name, 2445 chap)); 2446 kmem_free(chap, sizeof (*chap)); 2447 } 2448 } 2449 2450 if (name == NULL) { 2451 rw_exit( 2452 &ihp->hba_sess_list_rwlock); 2453 rtn = EFAULT; 2454 break; 2455 } 2456 2457 if (persistent_chap_get((char *)name, chap) == B_FALSE) { 2458 rw_exit(&ihp->hba_sess_list_rwlock); 2459 rtn = EIO; 2460 break; 2461 } 2462 rw_exit(&ihp->hba_sess_list_rwlock); 2463 2464 rtn = ddi_copyout(chap, (caddr_t)arg, sizeof (*chap), mode); 2465 kmem_free(chap, sizeof (*chap)); 2466 break; 2467 2468 /* 2469 * ISCSI_CHAP_CLEAR - 2470 */ 2471 case ISCSI_CHAP_CLEAR: 2472 chap = (iscsi_chap_props_t *)kmem_zalloc(sizeof (*chap), 2473 KM_SLEEP); 2474 if (ddi_copyin((caddr_t)arg, chap, sizeof (*chap), mode)) { 2475 rtn = EFAULT; 2476 kmem_free(chap, sizeof (*chap)); 2477 break; 2478 } else if (chap->c_vers != ISCSI_INTERFACE_VERSION) { 2479 rtn = EINVAL; 2480 kmem_free(chap, sizeof (*chap)); 2481 break; 2482 } 2483 2484 if (chap->c_oid == ihp->hba_oid) { 2485 iscsi_sess_t *sessp; 2486 2487 name = ihp->hba_name; 2488 2489 if (persistent_chap_clear( 2490 (char *)name) == B_FALSE) { 2491 rtn = EIO; 2492 } 2493 2494 /* 2495 * Loop through all sessions and memset their 2496 * (initiator's) passwords 2497 */ 2498 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2499 for (sessp = ihp->hba_sess_list; sessp; 2500 sessp = sessp->sess_next) { 2501 (void) memset(sessp->sess_auth.password, 2502 0, iscsiAuthStringMaxLength); 2503 sessp->sess_auth.password_length = 0; 2504 } 2505 rw_exit(&ihp->hba_sess_list_rwlock); 2506 2507 } else { 2508 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2509 /* 2510 * If the oid does represent a session check to see 2511 * if it is a target oid. If so, return the target's 2512 * associated session. 2513 */ 2514 rtn = iscsi_sess_get(chap->c_oid, ihp, &isp); 2515 if (rtn != 0) { 2516 rtn = iscsi_sess_get_by_target(chap->c_oid, 2517 ihp, &isp); 2518 } 2519 2520 rw_exit(&ihp->hba_sess_list_rwlock); 2521 2522 /* 2523 * If rtn is zero then we have found an 2524 * existing session. Use the session name to 2525 * do param lookup. If rtn is non-zero then 2526 * create a targetparam object and use its name 2527 * for param lookup. 2528 */ 2529 if (rtn == 0) { 2530 name = isp->sess_name; 2531 } else { 2532 name = 2533 iscsi_targetparam_get_name(chap->c_oid); 2534 rtn = 0; 2535 } 2536 2537 if (name == NULL) { 2538 rtn = EFAULT; 2539 break; 2540 } 2541 2542 if (persistent_chap_clear( 2543 (char *)name) == B_FALSE) { 2544 rtn = EIO; 2545 } 2546 2547 /* 2548 * Clear out session chap password if we found a 2549 * session above. 2550 */ 2551 if (isp != NULL) { 2552 (void) memset(isp->sess_auth.password_in, 2553 0, iscsiAuthStringMaxLength); 2554 isp->sess_auth.password_length_in = 0; 2555 } 2556 2557 } 2558 2559 kmem_free(chap, sizeof (*chap)); 2560 break; 2561 2562 /* 2563 * ISCSI_STATIC_GET - 2564 */ 2565 case ISCSI_STATIC_GET: 2566 ispp = (iscsi_static_property_t *)kmem_alloc( 2567 sizeof (*ispp), KM_SLEEP); 2568 2569 if (ddi_copyin((caddr_t)arg, ispp, sizeof (*ispp), mode)) { 2570 rtn = EFAULT; 2571 kmem_free(ispp, sizeof (*ispp)); 2572 break; 2573 } 2574 2575 if (ispp->p_vers != ISCSI_INTERFACE_VERSION) { 2576 rtn = EINVAL; 2577 kmem_free(ispp, sizeof (*ispp)); 2578 break; 2579 } 2580 2581 { 2582 void *v = NULL; 2583 boolean_t found = B_FALSE; 2584 2585 persistent_static_addr_lock(); 2586 while (persistent_static_addr_next(&v, 2587 (char *)ispp->p_name, &e) == B_TRUE) { 2588 2589 if (ispp->p_oid == e.e_oid) { 2590 /* 2591 * In case there are multiple 2592 * addresses associated with the 2593 * given target OID, pick the first 2594 * one. 2595 */ 2596 iscsi_addr_t *ap; 2597 2598 ap = &(ispp->p_addr_list.al_addrs[0]); 2599 ap->a_port = e.e_port; 2600 ap->a_addr.i_insize = e.e_insize; 2601 bcopy(e.e_u.u_in6.s6_addr, 2602 ap->a_addr.i_addr.in6.s6_addr, 2603 e.e_insize); 2604 ispp->p_name_len = 2605 strlen((char *)ispp->p_name); 2606 ispp->p_addr_list.al_tpgt = e.e_tpgt; 2607 ispp->p_addr_list.al_out_cnt = 1; 2608 2609 found = B_TRUE; 2610 break; 2611 } 2612 } 2613 persistent_static_addr_unlock(); 2614 2615 if (found == B_TRUE) { 2616 rtn = ddi_copyout(ispp, (caddr_t)arg, 2617 sizeof (*ispp), mode); 2618 } else { 2619 rtn = ENOENT; 2620 } 2621 } 2622 kmem_free(ispp, sizeof (*ispp)); 2623 2624 break; 2625 2626 /* 2627 * ISCSI_STATIC_SET - 2628 */ 2629 case ISCSI_STATIC_SET: 2630 target = iscsi_ioctl_copyin((caddr_t)arg, mode, 2631 sizeof (*target)); 2632 if (target == NULL) { 2633 rtn = EFAULT; 2634 break; 2635 } 2636 2637 if ((target->te_entry.e_vers != ISCSI_INTERFACE_VERSION) || 2638 (target->te_entry.e_insize == 0)) { 2639 kmem_free(target, sizeof (*target)); 2640 rtn = EINVAL; 2641 break; 2642 } 2643 2644 /* Check if the target's already been added */ 2645 { 2646 boolean_t static_target_found = B_FALSE; 2647 void *v = NULL; 2648 2649 name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 2650 persistent_static_addr_lock(); 2651 while (persistent_static_addr_next(&v, (char *)name, 2652 &e) == B_TRUE) { 2653 /* 2654 * MC/S - Need to check IP address and port 2655 * number as well when we support MC/S. 2656 */ 2657 if ((strncmp((char *)name, 2658 (char *)target->te_name, 2659 ISCSI_MAX_NAME_LEN) == 0) && 2660 (target->te_entry.e_tpgt == e.e_tpgt) && 2661 (target->te_entry.e_insize == e.e_insize) && 2662 (bcmp(&target->te_entry.e_u, &e.e_u, 2663 e.e_insize) == 0)) { 2664 /* 2665 * We don't allow MC/S for now but 2666 * we do allow adding the same target 2667 * with different TPGTs (hence, 2668 * different sessions). 2669 */ 2670 static_target_found = B_TRUE; 2671 break; 2672 } 2673 } 2674 persistent_static_addr_unlock(); 2675 kmem_free(name, ISCSI_MAX_NAME_LEN); 2676 2677 if (static_target_found == B_TRUE) { 2678 /* Duplicate entry */ 2679 kmem_free(target, sizeof (*target)); 2680 rtn = EEXIST; 2681 break; 2682 } 2683 } 2684 2685 if (target->te_entry.e_oid == ISCSI_OID_NOTSET) { 2686 mutex_enter(&iscsi_oid_mutex); 2687 target->te_entry.e_oid = iscsi_oid++; 2688 mutex_exit(&iscsi_oid_mutex); 2689 } 2690 2691 persistent_static_addr_lock(); 2692 if (persistent_static_addr_set((char *)target->te_name, 2693 &target->te_entry) == B_FALSE) { 2694 persistent_static_addr_unlock(); 2695 kmem_free(target, sizeof (*target)); 2696 rtn = EIO; 2697 break; 2698 } 2699 persistent_static_addr_unlock(); 2700 2701 /* 2702 * If Static Targets discovery is enabled, then add 2703 * target to discovery queue. Otherwise, just create 2704 * the session for potential future use. 2705 */ 2706 method = persistent_disc_meth_get(); 2707 if (method & iSCSIDiscoveryMethodStatic) { 2708 iscsid_poke_discovery(ihp, iSCSIDiscoveryMethodStatic); 2709 (void) iscsid_login_tgt(ihp, (char *)target->te_name, 2710 iSCSIDiscoveryMethodStatic, NULL); 2711 } 2712 2713 rtn = iscsi_ioctl_copyout(target, sizeof (*target), 2714 (caddr_t)arg, mode); 2715 break; 2716 2717 /* 2718 * ISCSI_STATIC_CLEAR - 2719 */ 2720 case ISCSI_STATIC_CLEAR: 2721 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 2722 rtn = EFAULT; 2723 break; 2724 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 2725 rtn = EINVAL; 2726 break; 2727 } 2728 2729 { 2730 boolean_t found = B_FALSE; 2731 void *v = NULL; 2732 entry_t tmp_e; 2733 char *name = NULL; 2734 2735 name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 2736 2737 /* Find name for matching static_tgt oid */ 2738 persistent_static_addr_lock(); 2739 while (persistent_static_addr_next(&v, 2740 (char *)name, &tmp_e) == B_TRUE) { 2741 if (e.e_oid == tmp_e.e_oid) { 2742 found = B_TRUE; 2743 break; 2744 } 2745 } 2746 2747 /* If static_tgt found logout and remove it */ 2748 if (found == B_TRUE) { 2749 2750 iscsid_addr_to_sockaddr(tmp_e.e_insize, 2751 &tmp_e.e_u, tmp_e.e_port, &addr_dsc.sin); 2752 2753 persistent_static_addr_unlock(); 2754 2755 /* 2756 * If discovery in progress, try few times 2757 * before return busy 2758 */ 2759 retry = 0; 2760 mutex_enter(&ihp->hba_discovery_events_mutex); 2761 while (ihp->hba_discovery_in_progress == 2762 B_TRUE) { 2763 if (++retry == 5) { 2764 rtn = EBUSY; 2765 break; 2766 } 2767 mutex_exit( 2768 &ihp->hba_discovery_events_mutex); 2769 delay(SEC_TO_TICK( 2770 ISCSI_DISC_DELAY)); 2771 mutex_enter( 2772 &ihp->hba_discovery_events_mutex); 2773 } 2774 /* remove from persistent store */ 2775 if (rtn == 0 && persistent_static_addr_clear( 2776 e.e_oid) == B_FALSE) { 2777 rtn = EIO; 2778 } 2779 mutex_exit(&ihp->hba_discovery_events_mutex); 2780 2781 if (rtn != 0) { 2782 kmem_free(name, ISCSI_MAX_NAME_LEN); 2783 break; 2784 } 2785 2786 /* Attempt to logout of target */ 2787 if (iscsid_del(ihp, (char *)name, 2788 iSCSIDiscoveryMethodStatic, &addr_dsc.sin) 2789 == B_FALSE) { 2790 persistent_static_addr_lock(); 2791 2792 /* 2793 * Restore static_tgt to 2794 * persistent store 2795 */ 2796 if (persistent_static_addr_set( 2797 (char *)name, 2798 &e) == B_FALSE) { 2799 cmn_err(CE_WARN, "Failed to " 2800 "restore static target " 2801 "address after logout " 2802 "target failure."); 2803 } 2804 persistent_static_addr_unlock(); 2805 rtn = EBUSY; 2806 } else { 2807 iscsid_poke_discovery(ihp, 2808 iSCSIDiscoveryMethodStatic); 2809 (void) iscsid_login_tgt(ihp, 2810 (char *)name, 2811 iSCSIDiscoveryMethodStatic, 2812 NULL); 2813 2814 } 2815 } else { 2816 persistent_static_addr_unlock(); 2817 rtn = EIO; 2818 } 2819 kmem_free(name, ISCSI_MAX_NAME_LEN); 2820 } 2821 break; 2822 2823 /* 2824 * ISCSI_ISNS_SERVER_ADDR_SET: 2825 */ 2826 case ISCSI_ISNS_SERVER_ADDR_SET: 2827 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 2828 rtn = EFAULT; 2829 break; 2830 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 2831 rtn = EINVAL; 2832 break; 2833 } 2834 2835 if (persistent_isns_addr_set(&e) == B_FALSE) { 2836 rtn = EIO; 2837 break; 2838 } 2839 2840 /* 2841 * If iSNS server discovery is enabled, then kickoff 2842 * discovery of the targets advertised by the recently 2843 * added iSNS server address. 2844 */ 2845 method = persistent_disc_meth_get(); 2846 if (method & iSCSIDiscoveryMethodISNS) { 2847 initiator_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, 2848 KM_SLEEP); 2849 if (persistent_initiator_name_get(initiator_node_name, 2850 ISCSI_MAX_NAME_LEN) != B_TRUE) { 2851 kmem_free(initiator_node_name, 2852 ISCSI_MAX_NAME_LEN); 2853 initiator_node_name = NULL; 2854 rtn = EIO; 2855 break; 2856 } 2857 if (strlen(initiator_node_name) == 0) { 2858 kmem_free(initiator_node_name, 2859 ISCSI_MAX_NAME_LEN); 2860 initiator_node_name = NULL; 2861 rtn = EIO; 2862 break; 2863 } 2864 2865 initiator_node_alias = kmem_zalloc(ISCSI_MAX_NAME_LEN, 2866 KM_SLEEP); 2867 if (persistent_alias_name_get(initiator_node_alias, 2868 ISCSI_MAX_NAME_LEN) != B_TRUE) { 2869 initiator_node_alias[0] = '\0'; 2870 } 2871 2872 /* 2873 * Register this initiator node against this iSNS 2874 * server. 2875 */ 2876 (void) isns_reg_one_server(&e, ihp->hba_isid, 2877 (uint8_t *)initiator_node_name, 2878 ISCSI_MAX_NAME_LEN, 2879 (uint8_t *)initiator_node_alias, 2880 ISCSI_MAX_NAME_LEN, 2881 ISNS_INITIATOR_NODE_TYPE, 2882 isns_scn_callback); 2883 2884 iscsid_do_isns_query_one_server(ihp, &e); 2885 2886 iscsid_addr_to_sockaddr(e.e_insize, 2887 &e.e_u, e.e_port, &addr_dsc.sin); 2888 2889 (void) iscsid_login_tgt(ihp, NULL, 2890 iSCSIDiscoveryMethodISNS, 2891 &addr_dsc.sin); 2892 2893 /* Done using the name and alias - free them. */ 2894 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 2895 initiator_node_name = NULL; 2896 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN); 2897 initiator_node_alias = NULL; 2898 } 2899 break; 2900 2901 /* 2902 * ISCSI_DISCOVERY_ADDR_SET: 2903 */ 2904 case ISCSI_DISCOVERY_ADDR_SET: 2905 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 2906 rtn = EFAULT; 2907 break; 2908 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 2909 rtn = EINVAL; 2910 break; 2911 } 2912 2913 if (e.e_oid == ISCSI_OID_NOTSET) { 2914 mutex_enter(&iscsi_oid_mutex); 2915 e.e_oid = iscsi_oid++; 2916 mutex_exit(&iscsi_oid_mutex); 2917 } 2918 2919 if (persistent_disc_addr_set(&e) == B_FALSE) { 2920 rtn = EIO; 2921 break; 2922 } 2923 2924 /* 2925 * If Send Targets discovery is enabled, then kickoff 2926 * discovery of the targets advertised by the recently 2927 * added discovery address. 2928 */ 2929 method = persistent_disc_meth_get(); 2930 if (method & iSCSIDiscoveryMethodSendTargets) { 2931 2932 iscsid_addr_to_sockaddr(e.e_insize, 2933 &e.e_u, e.e_port, &addr_dsc.sin); 2934 iscsid_do_sendtgts(&e); 2935 (void) iscsid_login_tgt(ihp, NULL, 2936 iSCSIDiscoveryMethodSendTargets, 2937 &addr_dsc.sin); 2938 2939 } 2940 break; 2941 2942 /* 2943 * ISCSI_DISCOVERY_ADDR_LIST_GET 2944 */ 2945 case ISCSI_DISCOVERY_ADDR_LIST_GET: 2946 /* copyin user args */ 2947 if (ddi_copyin((caddr_t)arg, &ial, sizeof (ial), mode)) { 2948 rtn = EFAULT; 2949 break; 2950 } 2951 2952 if (ial.al_vers != ISCSI_INTERFACE_VERSION) { 2953 rtn = EINVAL; 2954 break; 2955 } 2956 2957 list_space = sizeof (iscsi_addr_list_t); 2958 if (ial.al_in_cnt != 0) { 2959 list_space += (sizeof (iscsi_addr_t) * 2960 (ial.al_in_cnt - 1)); 2961 } 2962 2963 ialp = kmem_zalloc(list_space, KM_SLEEP); 2964 bcopy(&ial, ialp, sizeof (iscsi_addr_list_t)); 2965 2966 void_p = NULL; 2967 ialp->al_out_cnt = 0; 2968 persistent_disc_addr_lock(); 2969 while (persistent_disc_addr_next(&void_p, &e) == B_TRUE) { 2970 if (ialp->al_out_cnt < ialp->al_in_cnt) { 2971 int i = ialp->al_out_cnt; 2972 iscsi_addr_t *addr = &ialp->al_addrs[i]; 2973 2974 addr->a_port = e.e_port; 2975 addr->a_addr.i_insize = e.e_insize; 2976 addr->a_oid = e.e_oid; 2977 2978 if (e.e_insize == sizeof (struct in_addr)) { 2979 /* IPv4 */ 2980 addr->a_addr.i_addr.in4.s_addr = 2981 e.e_u.u_in4.s_addr; 2982 } else if (e.e_insize == 2983 sizeof (struct in6_addr)) { 2984 /* IPv6 */ 2985 bcopy(e.e_u.u_in6.s6_addr, 2986 addr->a_addr.i_addr.in6.s6_addr, 2987 16); 2988 } 2989 } 2990 ialp->al_out_cnt++; 2991 } 2992 persistent_disc_addr_unlock(); 2993 2994 rtn = ddi_copyout(ialp, (caddr_t)arg, list_space, mode); 2995 kmem_free(ialp, list_space); 2996 break; 2997 2998 /* 2999 * ISCSI_ISNS_SERVER_ADDR_LIST_GET 3000 */ 3001 case ISCSI_ISNS_SERVER_ADDR_LIST_GET: 3002 /* copyin user args */ 3003 if (ddi_copyin((caddr_t)arg, &ial, sizeof (ial), mode)) { 3004 rtn = EFAULT; 3005 break; 3006 } 3007 3008 if (ial.al_vers != ISCSI_INTERFACE_VERSION) { 3009 rtn = EINVAL; 3010 break; 3011 } 3012 3013 list_space = sizeof (iscsi_addr_list_t); 3014 if (ial.al_in_cnt != 0) { 3015 list_space += (sizeof (iscsi_addr_t) * 3016 (ial.al_in_cnt - 1)); 3017 } 3018 3019 ialp = kmem_zalloc(list_space, KM_SLEEP); 3020 bcopy(&ial, ialp, sizeof (iscsi_addr_list_t)); 3021 3022 void_p = NULL; 3023 ialp->al_out_cnt = 0; 3024 persistent_isns_addr_lock(); 3025 while (persistent_isns_addr_next(&void_p, &e) == B_TRUE) { 3026 if (ialp->al_out_cnt < ialp->al_in_cnt) { 3027 int i = ialp->al_out_cnt; 3028 iscsi_addr_t *addr = &ialp->al_addrs[i]; 3029 3030 addr->a_port = e.e_port; 3031 addr->a_addr.i_insize = e.e_insize; 3032 if (e.e_insize == sizeof (struct in_addr)) { 3033 /* IPv4 */ 3034 addr->a_addr.i_addr.in4.s_addr = 3035 e.e_u.u_in4.s_addr; 3036 } else if (e.e_insize == 3037 sizeof (struct in6_addr)) { 3038 /* IPv6 */ 3039 bcopy(e.e_u.u_in6.s6_addr, 3040 addr->a_addr.i_addr.in6.s6_addr, 3041 16); 3042 } 3043 } 3044 ialp->al_out_cnt++; 3045 } 3046 persistent_isns_addr_unlock(); 3047 3048 rtn = ddi_copyout(ialp, (caddr_t)arg, list_space, mode); 3049 kmem_free(ialp, list_space); 3050 break; 3051 3052 /* 3053 * ISCSI_DISCOVERY_ADDR_CLEAR: 3054 */ 3055 case ISCSI_DISCOVERY_ADDR_CLEAR: 3056 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 3057 rtn = EFAULT; 3058 break; 3059 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 3060 rtn = EINVAL; 3061 break; 3062 } 3063 3064 iscsid_addr_to_sockaddr(e.e_insize, 3065 &e.e_u, e.e_port, &addr_dsc.sin); 3066 3067 /* If discovery in progress, try few times before return busy */ 3068 retry = 0; 3069 mutex_enter(&ihp->hba_discovery_events_mutex); 3070 while (ihp->hba_discovery_in_progress == B_TRUE) { 3071 if (++retry == 5) { 3072 rtn = EBUSY; 3073 break; 3074 } 3075 mutex_exit(&ihp->hba_discovery_events_mutex); 3076 delay(SEC_TO_TICK(ISCSI_DISC_DELAY)); 3077 mutex_enter(&ihp->hba_discovery_events_mutex); 3078 } 3079 3080 /* 3081 * Clear discovery address first, so that any bus config 3082 * will ignore this discovery address 3083 */ 3084 if (rtn == 0 && persistent_disc_addr_clear(&e) == B_FALSE) { 3085 rtn = EIO; 3086 } 3087 mutex_exit(&ihp->hba_discovery_events_mutex); 3088 3089 if (rtn != 0) { 3090 break; 3091 } 3092 /* Attempt to logout of associated targets */ 3093 if (iscsid_del(ihp, NULL, 3094 iSCSIDiscoveryMethodSendTargets, &addr_dsc.sin) == 3095 B_FALSE) { 3096 /* Failure!, restore the discovery addr. */ 3097 if (persistent_disc_addr_set(&e) == B_FALSE) { 3098 cmn_err(CE_WARN, "Failed to restore sendtgt " 3099 "discovery address after logout associated " 3100 "targets failures."); 3101 } 3102 rtn = EBUSY; 3103 } 3104 break; 3105 3106 /* 3107 * ISCSI_ISNS_SERVER_CLEAR: 3108 */ 3109 case ISCSI_ISNS_SERVER_ADDR_CLEAR: 3110 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 3111 rtn = EFAULT; 3112 break; 3113 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 3114 rtn = EINVAL; 3115 break; 3116 } 3117 3118 iscsid_addr_to_sockaddr(e.e_insize, 3119 &e.e_u, e.e_port, &addr_dsc.sin); 3120 3121 /* If discovery in progress, try few times before return busy */ 3122 retry = 0; 3123 mutex_enter(&ihp->hba_discovery_events_mutex); 3124 while (ihp->hba_discovery_in_progress == B_TRUE) { 3125 if (++retry == 5) { 3126 rtn = EBUSY; 3127 break; 3128 } 3129 mutex_exit(&ihp->hba_discovery_events_mutex); 3130 delay(SEC_TO_TICK(ISCSI_DISC_DELAY)); 3131 mutex_enter(&ihp->hba_discovery_events_mutex); 3132 } 3133 3134 /* 3135 * Clear isns server address first, so that any bus config 3136 * will ignore any target registerd on this isns server 3137 */ 3138 if (rtn == 0 && persistent_isns_addr_clear(&e) == B_FALSE) { 3139 rtn = EIO; 3140 } 3141 mutex_exit(&ihp->hba_discovery_events_mutex); 3142 3143 if (rtn != 0) { 3144 break; 3145 } 3146 3147 /* Attempt logout of associated targets */ 3148 if (iscsid_del(ihp, NULL, iSCSIDiscoveryMethodISNS, 3149 &addr_dsc.sin) == B_FALSE) { 3150 /* Failure!, restore the isns server addr. */ 3151 3152 if (persistent_isns_addr_set(&e) == B_FALSE) { 3153 cmn_err(CE_WARN, "Failed to restore isns server" 3154 " address after logout associated targets" 3155 " failures."); 3156 } 3157 rtn = EBUSY; 3158 } else { 3159 method = persistent_disc_meth_get(); 3160 if (method & iSCSIDiscoveryMethodISNS) { 3161 boolean_t is_last_isns_server_b = 3162 B_FALSE; 3163 int isns_server_count = 0; 3164 void *void_p = NULL; 3165 3166 /* 3167 * Check if the last iSNS server's been 3168 * removed. 3169 */ 3170 { 3171 entry_t tmp_e; 3172 persistent_isns_addr_lock(); 3173 while (persistent_isns_addr_next( 3174 &void_p, &tmp_e) == B_TRUE) { 3175 isns_server_count++; 3176 } 3177 } 3178 persistent_isns_addr_unlock(); 3179 if (isns_server_count == 0) { 3180 is_last_isns_server_b = B_TRUE; 3181 } 3182 3183 /* 3184 * Deregister this node from this iSNS 3185 * server. 3186 */ 3187 initiator_node_name = kmem_zalloc( 3188 ISCSI_MAX_NAME_LEN, KM_SLEEP); 3189 if (persistent_initiator_name_get( 3190 initiator_node_name, 3191 ISCSI_MAX_NAME_LEN) == B_TRUE) { 3192 3193 if (strlen(initiator_node_name) > 0) { 3194 (void) isns_dereg_one_server( 3195 &e, (uint8_t *) 3196 initiator_node_name, 3197 is_last_isns_server_b); 3198 } 3199 } 3200 kmem_free(initiator_node_name, 3201 ISCSI_MAX_NAME_LEN); 3202 initiator_node_name = NULL; 3203 } 3204 } 3205 break; 3206 3207 /* 3208 * ISCSI_DISCOVERY_SET - 3209 */ 3210 case ISCSI_DISCOVERY_SET: 3211 if (ddi_copyin((caddr_t)arg, &method, sizeof (method), mode)) { 3212 rtn = EFAULT; 3213 break; 3214 } 3215 3216 if (persistent_disc_meth_set(method) == B_FALSE) { 3217 rtn = EIO; 3218 } else { 3219 (void) iscsid_enable_discovery(ihp, method, B_FALSE); 3220 iscsid_poke_discovery(ihp, method); 3221 (void) iscsid_login_tgt(ihp, NULL, method, NULL); 3222 } 3223 break; 3224 3225 /* 3226 * ISCSI_DISCOVERY_GET - 3227 */ 3228 case ISCSI_DISCOVERY_GET: 3229 method = persistent_disc_meth_get(); 3230 rtn = ddi_copyout(&method, (caddr_t)arg, 3231 sizeof (method), mode); 3232 break; 3233 3234 /* 3235 * ISCSI_DISCOVERY_CLEAR - 3236 */ 3237 case ISCSI_DISCOVERY_CLEAR: 3238 if (ddi_copyin((caddr_t)arg, &method, sizeof (method), mode)) { 3239 rtn = EFAULT; 3240 break; 3241 } 3242 3243 /* If discovery in progress, try few times before return busy */ 3244 retry = 0; 3245 mutex_enter(&ihp->hba_discovery_events_mutex); 3246 while (ihp->hba_discovery_in_progress == B_TRUE) { 3247 if (++retry == 5) { 3248 rtn = EBUSY; 3249 break; 3250 } 3251 mutex_exit(&ihp->hba_discovery_events_mutex); 3252 delay(SEC_TO_TICK(ISCSI_DISC_DELAY)); 3253 mutex_enter(&ihp->hba_discovery_events_mutex); 3254 } 3255 3256 /* 3257 * Clear discovery first, so that any bus config or 3258 * discovery requests will ignore this discovery method 3259 */ 3260 if (rtn == 0 && persistent_disc_meth_clear(method) == B_FALSE) { 3261 rtn = EIO; 3262 } 3263 mutex_exit(&ihp->hba_discovery_events_mutex); 3264 3265 if (rtn != 0) { 3266 break; 3267 } 3268 3269 /* Attempt to logout from all associated targets */ 3270 if (iscsid_disable_discovery(ihp, method) == B_FALSE) { 3271 /* Failure!, reset the discovery */ 3272 if (persistent_disc_meth_set(method) == B_FALSE) { 3273 cmn_err(CE_WARN, "Failed to reset discovery " 3274 "method after discovery disable failure."); 3275 } 3276 rtn = EBUSY; 3277 } 3278 break; 3279 3280 /* 3281 * ISCSI_DISCOVERY_PROPS - 3282 */ 3283 case ISCSI_DISCOVERY_PROPS: 3284 iscsid_props(&discovery_props); 3285 if (ddi_copyout(&discovery_props, (caddr_t)arg, 3286 sizeof (discovery_props), mode)) 3287 rtn = EFAULT; 3288 break; 3289 3290 /* 3291 * ISCSI_LUN_OID_LIST -- 3292 */ 3293 case ISCSI_LUN_OID_LIST_GET: 3294 ll = (iscsi_lun_list_t *)kmem_alloc(sizeof (*ll), KM_SLEEP); 3295 if (ddi_copyin((caddr_t)arg, ll, sizeof (*ll), mode)) { 3296 rtn = EFAULT; 3297 kmem_free(ll, sizeof (*ll)); 3298 break; 3299 } 3300 3301 if (ll->ll_vers != ISCSI_INTERFACE_VERSION) { 3302 rtn = EINVAL; 3303 kmem_free(ll, sizeof (*ll)); 3304 break; 3305 } 3306 3307 /* 3308 * Find out how much space the user has allocated in their 3309 * structure. Match the same space for our structure. 3310 */ 3311 lun_sz = sizeof (iscsi_lun_list_t); 3312 if (ll->ll_in_cnt > 0) { 3313 lun_sz += (ll->ll_in_cnt - 1) * sizeof (iscsi_if_lun_t); 3314 } 3315 3316 llp = kmem_zalloc(lun_sz, KM_SLEEP); 3317 bcopy(ll, llp, sizeof (*ll)); 3318 kmem_free(ll, sizeof (*ll)); 3319 3320 /* 3321 * Check to see if oid references a target-param oid. If so, 3322 * find the associated session oid before getting lu list. 3323 */ 3324 if (iscsi_targetparam_get_name(llp->ll_tgt_oid) != NULL) { 3325 for (isp = ihp->hba_sess_list; isp; 3326 isp = isp->sess_next) { 3327 if (isp->sess_target_oid == llp->ll_tgt_oid) { 3328 target_oid = isp->sess_oid; 3329 break; 3330 } 3331 } 3332 } else { 3333 target_oid = llp->ll_tgt_oid; 3334 } 3335 3336 3337 /* 3338 * Look at the LUNs attached to the specified target. If there 3339 * is space in the user structure save that information locally. 3340 * Always add up the count to the total. By always adding 3341 * the count this code can be used if ll_in_cnt == 0 and 3342 * the user just wishes to know the appropriate size to 3343 * allocate. 3344 */ 3345 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3346 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) { 3347 if ((llp->ll_all_tgts == B_FALSE) && 3348 (isp->sess_oid != target_oid)) { 3349 continue; 3350 } 3351 rw_enter(&isp->sess_lun_list_rwlock, RW_READER); 3352 for (ilp = isp->sess_lun_list; ilp; 3353 ilp = ilp->lun_next) { 3354 if ((ilp->lun_state & 3355 ISCSI_LUN_STATE_ONLINE) && 3356 !(ilp->lun_state & 3357 ISCSI_LUN_STATE_INVALID)) { 3358 if (llp->ll_out_cnt < 3359 llp->ll_in_cnt) { 3360 iscsi_if_lun_t *lp; 3361 lp = &llp->ll_luns[ 3362 llp->ll_out_cnt]; 3363 3364 lp->l_tgt_oid = 3365 isp->sess_oid; 3366 lp->l_oid = ilp->lun_oid; 3367 lp->l_num = ilp->lun_num; 3368 } 3369 llp->ll_out_cnt++; 3370 } 3371 } 3372 rw_exit(&isp->sess_lun_list_rwlock); 3373 } 3374 rw_exit(&ihp->hba_sess_list_rwlock); 3375 3376 if (ddi_copyout(llp, (caddr_t)arg, lun_sz, mode)) { 3377 rtn = EFAULT; 3378 } 3379 3380 kmem_free(llp, lun_sz); 3381 break; 3382 3383 /* 3384 * ISCSI_LUN_PROPS_GET -- 3385 */ 3386 case ISCSI_LUN_PROPS_GET: 3387 lun = (iscsi_lun_props_t *)kmem_zalloc(sizeof (*lun), KM_SLEEP); 3388 if (ddi_copyin((caddr_t)arg, lun, sizeof (*lun), mode)) { 3389 rtn = EFAULT; 3390 kmem_free(lun, sizeof (*lun)); 3391 break; 3392 } 3393 3394 if (lun->lp_vers != ISCSI_INTERFACE_VERSION) { 3395 rtn = EINVAL; 3396 kmem_free(lun, sizeof (*lun)); 3397 break; 3398 } 3399 3400 /* 3401 * For the target specified, find the LUN specified and 3402 * return its properties 3403 */ 3404 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3405 rtn = iscsi_sess_get(lun->lp_tgt_oid, ihp, &isp); 3406 if (rtn != 0) { 3407 rw_exit(&ihp->hba_sess_list_rwlock); 3408 rtn = EFAULT; 3409 kmem_free(lun, sizeof (*lun)); 3410 break; 3411 } 3412 rtn = EINVAL; /* Set bad rtn, correct only if found */ 3413 rw_enter(&isp->sess_lun_list_rwlock, RW_READER); 3414 for (ilp = isp->sess_lun_list; ilp; ilp = ilp->lun_next) { 3415 if (ilp->lun_oid == lun->lp_oid) { 3416 lun->lp_num = ilp->lun_num; 3417 lun->lp_status = LunValid; 3418 lun->lp_time_online = ilp->lun_time_online; 3419 3420 if (ilp->lun_pip != NULL) { 3421 lun_dip = mdi_pi_get_client( 3422 ilp->lun_pip); 3423 } else { 3424 lun_dip = ilp->lun_dip; 3425 } 3426 3427 if (lun_dip != NULL && 3428 ((i_ddi_devi_attached(lun_dip)) || 3429 (ddi_get_devstate(lun_dip) == 3430 DDI_DEVSTATE_UP))) { 3431 (void) ddi_pathname(lun_dip, 3432 lun->lp_pathname); 3433 } else { 3434 /* 3435 * The LUN is not exported to the 3436 * OS yet. It is in the process 3437 * of being added. 3438 */ 3439 lun->lp_status = LunDoesNotExist; 3440 } 3441 bcopy(ilp->lun_vid, lun->lp_vid, 3442 sizeof (lun->lp_vid)); 3443 bcopy(ilp->lun_pid, lun->lp_pid, 3444 sizeof (lun->lp_pid)); 3445 rtn = ddi_copyout(lun, (caddr_t)arg, 3446 sizeof (*lun), mode); 3447 if (rtn == -1) { 3448 rtn = EFAULT; 3449 } 3450 break; 3451 } 3452 } 3453 rw_exit(&isp->sess_lun_list_rwlock); 3454 rw_exit(&ihp->hba_sess_list_rwlock); 3455 3456 kmem_free(lun, sizeof (*lun)); 3457 break; 3458 3459 /* 3460 * ISCSI_CONN_OID_LIST_GET -- 3461 */ 3462 #define ISCSIIOCOLGC iscsi_ioctl_conn_oid_list_get_copyout 3463 case ISCSI_CONN_OID_LIST_GET: 3464 { 3465 iscsi_conn_list_t *cl; 3466 3467 /* Asuume the worst */ 3468 rtn = EFAULT; 3469 3470 /* Copy the input argument into kernel world. */ 3471 cl = iscsi_ioctl_conn_oid_list_get_copyin( 3472 (caddr_t)arg, 3473 mode); 3474 if (cl != NULL) { 3475 if (iscsi_ioctl_conn_oid_list_get(ihp, cl) == 3476 B_TRUE) { 3477 rtn = 3478 ISCSIIOCOLGC( 3479 cl, (caddr_t)arg, mode); 3480 } 3481 } 3482 break; 3483 } 3484 #undef ISCSIIOCOLGC 3485 /* 3486 * ISCSI_CONN_OID_LIST_GET -- 3487 */ 3488 case ISCSI_CONN_PROPS_GET: 3489 { 3490 iscsi_conn_props_t *cp; 3491 3492 /* Asuume the worst */ 3493 rtn = EFAULT; 3494 3495 /* Copy the input argument into kernel world. */ 3496 cp = iscsi_ioctl_copyin( 3497 (caddr_t)arg, 3498 mode, 3499 sizeof (iscsi_conn_props_t)); 3500 3501 if (cp != NULL) { 3502 /* Get the propereties. */ 3503 if (iscsi_ioctl_conn_props_get(ihp, cp) == 3504 B_TRUE) { 3505 rtn = 3506 iscsi_ioctl_copyout( 3507 cp, 3508 sizeof (*cp), 3509 (caddr_t)arg, 3510 mode); 3511 } else { 3512 kmem_free(cp, sizeof (*cp)); 3513 cp = NULL; 3514 } 3515 } 3516 break; 3517 } 3518 3519 /* 3520 * ISCSI_RADIUS_GET - 3521 */ 3522 case ISCSI_RADIUS_GET: 3523 { 3524 iscsi_nvfile_status_t status; 3525 3526 radius = (iscsi_radius_props_t *)kmem_zalloc(sizeof (*radius), 3527 KM_SLEEP); 3528 if (ddi_copyin((caddr_t)arg, radius, sizeof (*radius), mode)) { 3529 kmem_free(radius, sizeof (*radius)); 3530 rtn = EFAULT; 3531 break; 3532 } else if (radius->r_vers != ISCSI_INTERFACE_VERSION) { 3533 kmem_free(radius, sizeof (*radius)); 3534 rtn = EINVAL; 3535 break; 3536 } 3537 3538 old_oid = radius->r_oid; 3539 3540 if (radius->r_oid == ihp->hba_oid) { 3541 name = ihp->hba_name; 3542 } else { 3543 /* 3544 * RADIUS configuration should be done on a per 3545 * initiator basis. 3546 */ 3547 kmem_free(radius, sizeof (*radius)); 3548 rtn = EINVAL; 3549 break; 3550 } 3551 3552 status = persistent_radius_get(radius); 3553 if (status == ISCSI_NVFILE_SUCCESS) { 3554 /* 3555 * Restore the value for overridden (and bogus) oid. 3556 */ 3557 radius->r_oid = old_oid; 3558 rtn = ddi_copyout(radius, (caddr_t)arg, 3559 sizeof (*radius), mode); 3560 } else if (status == ISCSI_NVFILE_NAMEVAL_NOT_FOUND) { 3561 rtn = ENOENT; 3562 } else { 3563 rtn = EIO; 3564 } 3565 kmem_free(radius, sizeof (*radius)); 3566 break; 3567 } 3568 3569 /* 3570 * ISCSI_RADIUS_SET - 3571 */ 3572 case ISCSI_RADIUS_SET: 3573 radius = (iscsi_radius_props_t *)kmem_zalloc(sizeof (*radius), 3574 KM_SLEEP); 3575 if (ddi_copyin((caddr_t)arg, radius, sizeof (*radius), mode)) { 3576 rtn = EFAULT; 3577 kmem_free(radius, sizeof (*radius)); 3578 break; 3579 } else if (radius->r_vers != ISCSI_INTERFACE_VERSION) { 3580 rtn = EINVAL; 3581 kmem_free(radius, sizeof (*radius)); 3582 break; 3583 } 3584 3585 if (radius->r_oid == ihp->hba_oid) { 3586 name = ihp->hba_name; 3587 } else { 3588 /* 3589 * RADIUS configuration should be done on a per 3590 * initiator basis. 3591 */ 3592 kmem_free(radius, sizeof (*radius)); 3593 rtn = EINVAL; 3594 break; 3595 } 3596 3597 if (persistent_radius_set(radius) == B_FALSE) { 3598 rtn = EIO; 3599 } 3600 3601 kmem_free(radius, sizeof (*radius)); 3602 break; 3603 3604 /* 3605 * ISCSI_AUTH_GET - 3606 */ 3607 case ISCSI_AUTH_GET: 3608 auth = (iscsi_auth_props_t *)kmem_zalloc(sizeof (*auth), 3609 KM_SLEEP); 3610 if (ddi_copyin((caddr_t)arg, auth, sizeof (*auth), mode)) { 3611 kmem_free(auth, sizeof (*auth)); 3612 rtn = EFAULT; 3613 break; 3614 } else if (auth->a_vers != ISCSI_INTERFACE_VERSION) { 3615 kmem_free(auth, sizeof (*auth)); 3616 rtn = EINVAL; 3617 break; 3618 } 3619 3620 old_oid = auth->a_oid; 3621 3622 if (auth->a_oid == ihp->hba_oid) { 3623 name = ihp->hba_name; 3624 } else { 3625 3626 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3627 /* 3628 * If the oid does represent a session check to see 3629 * if it is a target oid. If so, return the target's 3630 * associated session. 3631 */ 3632 rtn = iscsi_sess_get(auth->a_oid, ihp, &isp); 3633 if (rtn != 0) { 3634 rtn = iscsi_sess_get_by_target(auth->a_oid, 3635 ihp, &isp); 3636 } 3637 rw_exit(&ihp->hba_sess_list_rwlock); 3638 3639 /* 3640 * If rtn is zero then we have found an 3641 * existing session. Use the session name to 3642 * do param lookup. If rtn is non-zero then 3643 * create a targetparam object and use its name 3644 * for param lookup. 3645 */ 3646 if (rtn == 0) { 3647 name = isp->sess_name; 3648 } else { 3649 name = 3650 iscsi_targetparam_get_name(auth->a_oid); 3651 } 3652 } 3653 3654 if (name == NULL) { 3655 rtn = EFAULT; 3656 break; 3657 } 3658 3659 if (persistent_auth_get((char *)name, auth) == B_TRUE) { 3660 /* 3661 * Restore the value for overridden (and bogus) oid. 3662 */ 3663 auth->a_oid = old_oid; 3664 rtn = ddi_copyout(auth, (caddr_t)arg, 3665 sizeof (*auth), mode); 3666 } else { 3667 rtn = EIO; 3668 } 3669 3670 kmem_free(auth, sizeof (*auth)); 3671 break; 3672 3673 /* 3674 * ISCSI_AUTH_SET - 3675 */ 3676 case ISCSI_AUTH_SET: 3677 auth = (iscsi_auth_props_t *)kmem_zalloc(sizeof (*auth), 3678 KM_SLEEP); 3679 if (ddi_copyin((caddr_t)arg, auth, sizeof (*auth), mode)) { 3680 kmem_free(auth, sizeof (*auth)); 3681 rtn = EFAULT; 3682 break; 3683 } else if (auth->a_vers != ISCSI_INTERFACE_VERSION) { 3684 kmem_free(auth, sizeof (*auth)); 3685 rtn = EINVAL; 3686 break; 3687 } 3688 3689 if (auth->a_oid == ihp->hba_oid) { 3690 name = ihp->hba_name; 3691 } else { 3692 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3693 /* 3694 * If the oid does represent a session check to see 3695 * if it is a target oid. If so, return the target's 3696 * associated session. 3697 */ 3698 rtn = iscsi_sess_get(auth->a_oid, ihp, &isp); 3699 if (rtn != 0) { 3700 rtn = iscsi_sess_get_by_target(auth->a_oid, 3701 ihp, &isp); 3702 } 3703 rw_exit(&ihp->hba_sess_list_rwlock); 3704 3705 /* 3706 * If rtn is zero then we have found an 3707 * existing session. Use the session name to 3708 * do param lookup. If rtn is non-zero then 3709 * create a targetparam object and use its name 3710 * for param lookup. 3711 */ 3712 if (rtn == 0) { 3713 name = isp->sess_name; 3714 } else { 3715 name = 3716 iscsi_targetparam_get_name(auth->a_oid); 3717 rtn = 0; 3718 } 3719 } 3720 3721 if (name == NULL) { 3722 rtn = EFAULT; 3723 } else if (persistent_auth_set((char *)name, auth) 3724 == B_FALSE) { 3725 rtn = EIO; 3726 } 3727 3728 kmem_free(auth, sizeof (*auth)); 3729 break; 3730 3731 /* 3732 * ISCSI_AUTH_CLEAR - 3733 */ 3734 case ISCSI_AUTH_CLEAR: 3735 auth = (iscsi_auth_props_t *)kmem_alloc(sizeof (*auth), 3736 KM_SLEEP); 3737 if (ddi_copyin((caddr_t)arg, auth, sizeof (*auth), mode)) { 3738 kmem_free(auth, sizeof (*auth)); 3739 rtn = EFAULT; 3740 break; 3741 } else if (auth->a_vers != ISCSI_INTERFACE_VERSION) { 3742 kmem_free(auth, sizeof (*auth)); 3743 rtn = EINVAL; 3744 break; 3745 } 3746 3747 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3748 /* 3749 * If the oid does represent a session check to see 3750 * if it is a target oid. If so, return the target's 3751 * associated session. 3752 */ 3753 rtn = iscsi_sess_get(auth->a_oid, ihp, &isp); 3754 if (rtn != 0) { 3755 rtn = iscsi_sess_get_by_target(auth->a_oid, ihp, &isp); 3756 } 3757 rw_exit(&ihp->hba_sess_list_rwlock); 3758 3759 /* 3760 * If rtn is zero then we have found an 3761 * existing session. Use the session name to 3762 * do param lookup. If rtn is non-zero then 3763 * create a targetparam object and use its name 3764 * for param lookup. 3765 */ 3766 if (rtn == 0) { 3767 name = isp->sess_name; 3768 } else { 3769 name = 3770 iscsi_targetparam_get_name(auth->a_oid); 3771 rtn = 0; 3772 discovered = B_FALSE; 3773 } 3774 3775 if (name == NULL) { 3776 rtn = EFAULT; 3777 break; 3778 } 3779 3780 if (persistent_auth_clear((char *)name) == B_FALSE) { 3781 rtn = EIO; 3782 } 3783 3784 /* 3785 * ISCSI_TARGET_PARAM_CLEAR, ISCSI_CHAP_CLEAR and 3786 * ISCSI_AUTH_CLEAR ioctl are called sequentially to remove 3787 * target parameters. Here, the target that is not discovered 3788 * by initiator should be removed from the iscsi_targets list 3789 * residing in the memory. 3790 */ 3791 if (discovered == B_FALSE) { 3792 (void) iscsi_targetparam_remove_target(auth->a_oid); 3793 } 3794 3795 kmem_free(auth, sizeof (*auth)); 3796 break; 3797 3798 /* 3799 * ISCSI_DB_DUMP - 3800 */ 3801 case ISCSI_DB_DUMP: 3802 persistent_dump_data(); 3803 break; 3804 3805 case ISCSI_USCSI: 3806 3807 #ifdef _MULTI_DATAMODEL 3808 model = ddi_model_convert_from(mode & FMODELS); 3809 switch (model) { 3810 case DDI_MODEL_ILP32: 3811 3812 if (ddi_copyin((caddr_t)arg, &iu32_caller, 3813 sizeof (iscsi_uscsi32_t), mode)) { 3814 rtn = EFAULT; 3815 break; 3816 } 3817 3818 /* perform conversion from 32 -> 64 */ 3819 iu_caller.iu_vers = iu32_caller.iu_vers; 3820 iu_caller.iu_oid = iu32_caller.iu_oid; 3821 iu_caller.iu_tpgt = iu32_caller.iu_tpgt; 3822 iu_caller.iu_len = iu32_caller.iu_len; 3823 iu_caller.iu_lun = iu32_caller.iu_lun; 3824 uscsi_cmd32touscsi_cmd((&iu32_caller.iu_ucmd), 3825 (&iu_caller.iu_ucmd)); 3826 3827 break; 3828 case DDI_MODEL_NONE: 3829 if (ddi_copyin((caddr_t)arg, &iu_caller, 3830 sizeof (iscsi_uscsi_t), mode)) { 3831 rtn = EFAULT; 3832 break; 3833 } 3834 break; 3835 default: 3836 ASSERT(FALSE); 3837 rtn = EINVAL; 3838 break; 3839 } 3840 #endif /* _MULTI_DATAMODEL */ 3841 3842 /* If failures earlier break */ 3843 if (rtn != 0) { 3844 break; 3845 } 3846 3847 /* copy from caller to internel cmd */ 3848 bcopy(&iu_caller, &iu, sizeof (iu)); 3849 3850 if (iu.iu_vers != ISCSI_INTERFACE_VERSION) { 3851 rtn = EINVAL; 3852 break; 3853 } 3854 /* 3855 * Check to see if oid references a target-param oid. If so, 3856 * find the associated session oid before getting lu list. 3857 */ 3858 if (iscsi_targetparam_get_name(iu.iu_oid) != NULL) { 3859 for (isp = ihp->hba_sess_list; isp; isp = 3860 isp->sess_next) { 3861 if (isp->sess_target_oid == iu.iu_oid) { 3862 target_oid = isp->sess_oid; 3863 break; 3864 } 3865 } 3866 } else { 3867 target_oid = iu.iu_oid; 3868 } 3869 3870 /* make sure we have a matching session for this command */ 3871 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3872 rtn = iscsi_sess_get(target_oid, ihp, &isp); 3873 if (rtn != 0) { 3874 rtn = iscsi_sess_get_by_target(target_oid, ihp, 3875 &isp); 3876 if (rtn != 0) { 3877 rw_exit(&ihp->hba_sess_list_rwlock); 3878 rtn = EFAULT; 3879 break; 3880 } 3881 } 3882 /* 3883 * If a caller buffer is present allocate duplicate 3884 * kernel space and copyin caller memory. 3885 */ 3886 if (iu.iu_ucmd.uscsi_buflen > 0) { 3887 iu.iu_ucmd.uscsi_bufaddr = (caddr_t)kmem_alloc( 3888 iu.iu_ucmd.uscsi_buflen, KM_SLEEP); 3889 if (ddi_copyin(iu_caller.iu_ucmd.uscsi_bufaddr, 3890 iu.iu_ucmd.uscsi_bufaddr, 3891 iu.iu_ucmd.uscsi_buflen, mode)) { 3892 rw_exit(&ihp->hba_sess_list_rwlock); 3893 rtn = EFAULT; 3894 break; 3895 } 3896 } 3897 3898 /* 3899 * If a caller cdb is present allocate duplicate 3900 * kernel space and copyin caller memory. 3901 */ 3902 if (iu.iu_ucmd.uscsi_cdblen > 0) { 3903 iu.iu_ucmd.uscsi_cdb = (caddr_t)kmem_alloc( 3904 iu_caller.iu_ucmd.uscsi_cdblen, KM_SLEEP); 3905 if (ddi_copyin(iu_caller.iu_ucmd.uscsi_cdb, 3906 iu.iu_ucmd.uscsi_cdb, 3907 iu.iu_ucmd.uscsi_cdblen, mode)) { 3908 if (iu.iu_ucmd.uscsi_buflen > 0) { 3909 kmem_free(iu.iu_ucmd.uscsi_bufaddr, 3910 iu_caller.iu_ucmd.uscsi_buflen); 3911 } 3912 rw_exit(&ihp->hba_sess_list_rwlock); 3913 rtn = EFAULT; 3914 break; 3915 } 3916 } 3917 3918 /* 3919 * If a caller request sense is present allocate 3920 * duplicate kernel space. No need to copyin. 3921 */ 3922 if (iu.iu_ucmd.uscsi_rqlen > 0) { 3923 iu.iu_ucmd.uscsi_rqbuf = (caddr_t)kmem_alloc( 3924 iu.iu_ucmd.uscsi_rqlen, KM_SLEEP); 3925 } 3926 3927 /* issue passthru to io path handler */ 3928 rtn = iscsi_handle_passthru(isp, iu.iu_lun, &iu.iu_ucmd); 3929 if (rtn != 0) { 3930 rtn = EFAULT; 3931 } 3932 3933 /* 3934 * If the caller had a buf we need to do a copyout 3935 * and free the kernel memory 3936 */ 3937 if (iu.iu_ucmd.uscsi_buflen > 0) { 3938 if (ddi_copyout(iu.iu_ucmd.uscsi_bufaddr, 3939 iu_caller.iu_ucmd.uscsi_bufaddr, 3940 iu.iu_ucmd.uscsi_buflen, mode) != 0) { 3941 rtn = EFAULT; 3942 } 3943 kmem_free(iu.iu_ucmd.uscsi_bufaddr, 3944 iu.iu_ucmd.uscsi_buflen); 3945 } 3946 3947 /* We need to free kernel cdb, no need to copyout */ 3948 if (iu.iu_ucmd.uscsi_cdblen > 0) { 3949 kmem_free(iu.iu_ucmd.uscsi_cdb, 3950 iu.iu_ucmd.uscsi_cdblen); 3951 } 3952 3953 /* 3954 * If the caller had a request sense we need to 3955 * do a copyout and free the kernel memory 3956 */ 3957 if (iu.iu_ucmd.uscsi_rqlen > 0) { 3958 if (ddi_copyout(iu.iu_ucmd.uscsi_rqbuf, 3959 iu_caller.iu_ucmd.uscsi_rqbuf, 3960 iu.iu_ucmd.uscsi_rqlen, mode) != 0) { 3961 rtn = EFAULT; 3962 } 3963 kmem_free(iu.iu_ucmd.uscsi_rqbuf, 3964 iu.iu_ucmd.uscsi_rqlen); 3965 } 3966 3967 #ifdef _MULTI_DATAMODEL 3968 if (iu.iu_ucmd.uscsi_status != 0) { 3969 switch (model = ddi_model_convert_from( 3970 mode & FMODELS)) { 3971 case DDI_MODEL_ILP32: 3972 iu32_caller.iu_ucmd.uscsi_status = 3973 iu.iu_ucmd.uscsi_status; 3974 if (ddi_copyout((void *)&iu32_caller, 3975 (caddr_t)arg, sizeof (iscsi_uscsi32_t), 3976 mode) != 0) { 3977 rtn = EFAULT; 3978 } 3979 break; 3980 case DDI_MODEL_NONE: 3981 iu_caller.iu_ucmd.uscsi_status = 3982 iu.iu_ucmd.uscsi_status; 3983 if (ddi_copyout((void *)&iu_caller, 3984 (caddr_t)arg, sizeof (iscsi_uscsi_t), 3985 mode) != 0) { 3986 rtn = EFAULT; 3987 } 3988 break; 3989 default: 3990 ASSERT(FALSE); 3991 } 3992 } 3993 #endif /* _MULTI_DATAMODEL */ 3994 rw_exit(&ihp->hba_sess_list_rwlock); 3995 break; 3996 3997 case ISCSI_SMF_ONLINE: 3998 if (ddi_copyin((caddr_t)arg, &did, sizeof (int), mode) != 0) { 3999 rtn = EFAULT; 4000 break; 4001 } 4002 /* just a theoretical case */ 4003 if (ihp->hba_persistent_loaded == B_FALSE) { 4004 rtn = EFAULT; 4005 break; 4006 } 4007 4008 /* doesn't need to overwrite the status anymore */ 4009 mutex_enter(&ihp->hba_service_lock); 4010 if (ihp->hba_service_status_overwrite == B_TRUE) { 4011 ihp->hba_service_status = ISCSI_SERVICE_DISABLED; 4012 ihp->hba_service_status_overwrite = B_FALSE; 4013 } 4014 mutex_exit(&ihp->hba_service_lock); 4015 4016 if (iscsi_enter_service_zone(ihp, ISCSI_SERVICE_ENABLED) == 4017 B_FALSE) { 4018 break; 4019 } 4020 4021 rval = iscsi_door_bind(did); 4022 if (rval == B_TRUE) { 4023 rval = iscsid_start(ihp); 4024 if (rval == B_FALSE) { 4025 iscsi_door_unbind(); 4026 } 4027 } 4028 4029 if (rval == B_TRUE) { 4030 iscsi_exit_service_zone(ihp, ISCSI_SERVICE_ENABLED); 4031 } else { 4032 iscsi_exit_service_zone(ihp, ISCSI_SERVICE_DISABLED); 4033 rtn = EFAULT; 4034 } 4035 4036 break; 4037 4038 case ISCSI_SMF_OFFLINE: 4039 if (iscsi_enter_service_zone(ihp, ISCSI_SERVICE_DISABLED) 4040 == B_FALSE) { 4041 break; 4042 } 4043 4044 rval = iscsid_stop(ihp); 4045 4046 if (rval == B_TRUE) { 4047 iscsi_exit_service_zone(ihp, ISCSI_SERVICE_DISABLED); 4048 iscsi_door_unbind(); 4049 } else { 4050 iscsi_exit_service_zone(ihp, ISCSI_SERVICE_ENABLED); 4051 rtn = EFAULT; 4052 } 4053 break; 4054 4055 case ISCSI_SMF_GET: 4056 mutex_enter(&ihp->hba_service_lock); 4057 while (ihp->hba_service_status == 4058 ISCSI_SERVICE_TRANSITION) { 4059 cv_wait(&ihp->hba_service_cv, 4060 &ihp->hba_service_lock); 4061 } 4062 if (ddi_copyout((void *)&ihp->hba_service_status, 4063 (caddr_t)arg, sizeof (boolean_t), mode) != 0) { 4064 rtn = EFAULT; 4065 } 4066 mutex_exit(&ihp->hba_service_lock); 4067 break; 4068 4069 case ISCSI_DISCOVERY_EVENTS: 4070 /* 4071 * If discovery has not been completed and not in progress, 4072 * poke the discovery methods 4073 */ 4074 mutex_enter(&ihp->hba_discovery_events_mutex); 4075 method = ihp->hba_discovery_events; 4076 if ((method != ISCSI_ALL_DISCOVERY_METHODS) && 4077 (ihp->hba_discovery_in_progress == B_FALSE)) { 4078 ihp->hba_discovery_in_progress = B_TRUE; 4079 mutex_exit(&ihp->hba_discovery_events_mutex); 4080 iscsid_poke_discovery(ihp, iSCSIDiscoveryMethodUnknown); 4081 mutex_enter(&ihp->hba_discovery_events_mutex); 4082 ihp->hba_discovery_in_progress = B_FALSE; 4083 method = ihp->hba_discovery_events; 4084 } 4085 mutex_exit(&ihp->hba_discovery_events_mutex); 4086 4087 if (ddi_copyout((void *)&method, (caddr_t)arg, 4088 sizeof (method), mode) != 0) 4089 rtn = EFAULT; 4090 break; 4091 4092 /* 4093 * ISCSI_SENDTGTS_GET -- 4094 */ 4095 case ISCSI_SENDTGTS_GET: 4096 stl_hdr = iscsi_ioctl_copyin((caddr_t)arg, mode, 4097 sizeof (*stl_hdr)); 4098 if (stl_hdr == NULL) { 4099 rtn = EFAULT; 4100 break; 4101 } 4102 4103 if (stl_hdr->stl_entry.e_vers != ISCSI_INTERFACE_VERSION) { 4104 rtn = EINVAL; 4105 kmem_free(stl_hdr, sizeof (*stl_hdr)); 4106 break; 4107 } 4108 4109 /* calculate how much memory user allocated for SendTgts */ 4110 stl_sz = sizeof (*stl_hdr); 4111 if (stl_hdr->stl_in_cnt > 0) { 4112 stl_sz += ((stl_hdr->stl_in_cnt - 1) * 4113 sizeof (iscsi_sendtgts_entry_t)); 4114 } 4115 4116 /* allocate local SendTgts list of the same size */ 4117 istl = kmem_zalloc(stl_sz, KM_SLEEP); 4118 bcopy(stl_hdr, istl, sizeof (*stl_hdr)); 4119 kmem_free(stl_hdr, sizeof (*stl_hdr)); 4120 4121 /* lock interface so only one SendTargets operation occurs */ 4122 sema_p(&ihp->hba_sendtgts_semaphore); 4123 4124 rtn = iscsi_ioctl_sendtgts_get(ihp, istl); 4125 4126 if (rtn == 0) { 4127 rtn = iscsi_ioctl_copyout(istl, stl_sz, 4128 (caddr_t)arg, mode); 4129 } 4130 4131 /* release lock to allow another SendTargets discovery */ 4132 sema_v(&ihp->hba_sendtgts_semaphore); 4133 4134 break; 4135 4136 /* 4137 * ISCSI_ISNS_SERVER_GET -- 4138 */ 4139 case ISCSI_ISNS_SERVER_GET: 4140 server_pg_list_hdr = iscsi_ioctl_copyin((caddr_t)arg, mode, 4141 sizeof (*server_pg_list_hdr)); 4142 if (server_pg_list_hdr == NULL) { 4143 rtn = EFAULT; 4144 break; 4145 } 4146 4147 /* If iSNS discovery mode is not set, return with zero entry */ 4148 method = persistent_disc_meth_get(); 4149 if ((method & iSCSIDiscoveryMethodISNS) == 0) { 4150 kmem_free(server_pg_list_hdr, 4151 sizeof (*server_pg_list_hdr)); 4152 server_pg_list_hdr = NULL; 4153 rtn = EACCES; 4154 break; 4155 } 4156 4157 initiator_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 4158 if (persistent_initiator_name_get(initiator_node_name, 4159 ISCSI_MAX_NAME_LEN) != B_TRUE) { 4160 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 4161 initiator_node_name = NULL; 4162 kmem_free(server_pg_list_hdr, 4163 sizeof (*server_pg_list_hdr)); 4164 server_pg_list_hdr = NULL; 4165 rtn = EIO; 4166 break; 4167 } 4168 if (strlen(initiator_node_name) == 0) { 4169 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 4170 initiator_node_name = NULL; 4171 kmem_free(server_pg_list_hdr, 4172 sizeof (*server_pg_list_hdr)); 4173 server_pg_list_hdr = NULL; 4174 rtn = EIO; 4175 break; 4176 } 4177 4178 initiator_node_alias = kmem_zalloc( 4179 ISCSI_MAX_NAME_LEN, KM_SLEEP); 4180 if (persistent_alias_name_get(initiator_node_alias, 4181 ISCSI_MAX_NAME_LEN) != B_TRUE) { 4182 initiator_node_alias[0] = '\0'; 4183 } 4184 rtn = isns_query_one_server(&(server_pg_list_hdr->addr), 4185 ihp->hba_isid, 4186 (uint8_t *)initiator_node_name, 4187 (uint8_t *)initiator_node_alias, 4188 ISNS_INITIATOR_NODE_TYPE, 4189 &pg_list); 4190 if (rtn != isns_ok || pg_list == NULL) { 4191 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 4192 initiator_node_name = NULL; 4193 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN); 4194 initiator_node_alias = NULL; 4195 kmem_free(server_pg_list_hdr, 4196 sizeof (*server_pg_list_hdr)); 4197 server_pg_list_hdr = NULL; 4198 rtn = EIO; 4199 break; 4200 } 4201 4202 /* 4203 * pg_list_sz is the size of the pg_list returned from the 4204 * isns_query_all 4205 * 4206 * pg_sz_copy_out is the size of the pg_list we are going to 4207 * return back to the caller 4208 * 4209 * server_pg_list_sz is total amount of data we are returning 4210 * back to the caller 4211 */ 4212 pg_list->pg_in_cnt = 4213 server_pg_list_hdr->addr_port_list.pg_in_cnt; 4214 pg_list_sz = sizeof (isns_portal_group_list_t); 4215 if (pg_list->pg_out_cnt > 0) { 4216 pg_list_sz += (pg_list->pg_out_cnt - 1) * 4217 sizeof (isns_portal_group_t); 4218 } 4219 /* 4220 * check if caller passed in a buffer with enough space 4221 * if there isn't enough space, fill the caller's buffer with 4222 * as much information as possible. 4223 * 4224 * if pg_out_cnt > pg_in_cnt, pg_out_cnt will be returned with 4225 * the total number of targets found 4226 * 4227 * if pg_out_cnt < pg_in_cnt, pg_out_cnt will be the number 4228 * of targets returned 4229 */ 4230 if (pg_list->pg_in_cnt < pg_list->pg_out_cnt) { 4231 pg_sz_copy_out = sizeof (isns_portal_group_list_t); 4232 if (pg_list->pg_in_cnt > 0) { 4233 pg_sz_copy_out += (pg_list->pg_in_cnt - 1) * 4234 sizeof (isns_portal_group_t); 4235 } 4236 server_pg_list_sz = 4237 sizeof (isns_server_portal_group_list_t); 4238 if (pg_list->pg_in_cnt > 0) { 4239 server_pg_list_sz += (pg_list->pg_in_cnt - 1) * 4240 sizeof (isns_portal_group_t); 4241 } 4242 } else { 4243 pg_sz_copy_out = pg_list_sz; 4244 server_pg_list_sz = 4245 sizeof (isns_server_portal_group_list_t); 4246 if (pg_list->pg_out_cnt > 0) { 4247 server_pg_list_sz += (pg_list->pg_out_cnt - 1) * 4248 sizeof (isns_portal_group_t); 4249 } 4250 } 4251 4252 server_pg_list = (isns_server_portal_group_list_t *)kmem_zalloc( 4253 server_pg_list_sz, KM_SLEEP); 4254 4255 bcopy(&(server_pg_list_hdr->addr), &(server_pg_list->addr), 4256 sizeof (server_pg_list->addr)); 4257 bcopy(pg_list, &server_pg_list->addr_port_list, pg_sz_copy_out); 4258 4259 if (ddi_copyout(server_pg_list, (caddr_t)arg, server_pg_list_sz, 4260 mode) != 0) { 4261 rtn = EFAULT; 4262 } 4263 DTRACE_PROBE1(iscsi_ioctl_iscsi_isns_server_get_pg_sz, 4264 int, pg_list_sz); 4265 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 4266 initiator_node_name = NULL; 4267 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN); 4268 initiator_node_alias = NULL; 4269 kmem_free(pg_list, pg_list_sz); 4270 pg_list = NULL; 4271 kmem_free(server_pg_list, server_pg_list_sz); 4272 server_pg_list = NULL; 4273 kmem_free(server_pg_list_hdr, sizeof (*server_pg_list_hdr)); 4274 server_pg_list_hdr = NULL; 4275 break; 4276 4277 /* 4278 * ISCSI_GET_CONFIG_SESSIONS -- 4279 */ 4280 case ISCSI_GET_CONFIG_SESSIONS: 4281 /* FALLTHRU */ 4282 4283 case ISCSI_SET_CONFIG_SESSIONS: 4284 size = sizeof (*ics); 4285 ics = iscsi_ioctl_copyin((caddr_t)arg, mode, size); 4286 if (ics == NULL) { 4287 rtn = EFAULT; 4288 break; 4289 } 4290 4291 /* verify version infomration */ 4292 if (ics->ics_ver != ISCSI_INTERFACE_VERSION) { 4293 rtn = EINVAL; 4294 kmem_free(ics, size); 4295 ics = NULL; 4296 break; 4297 } 4298 4299 /* Check to see if we need to copy in more memory */ 4300 if (ics->ics_in > 1) { 4301 /* record correct size */ 4302 size = ISCSI_SESSION_CONFIG_SIZE(ics->ics_in); 4303 /* free old buffer */ 4304 kmem_free(ics, sizeof (*ics)); 4305 4306 /* copy in complete buffer size */ 4307 ics = iscsi_ioctl_copyin((caddr_t)arg, mode, size); 4308 if (ics == NULL) { 4309 rtn = EFAULT; 4310 break; 4311 } 4312 } 4313 4314 /* switch action based on get or set */ 4315 if (cmd == ISCSI_GET_CONFIG_SESSIONS) { 4316 /* get */ 4317 rtn = iscsi_ioctl_get_config_sess(ihp, ics); 4318 if (rtn == 0) { 4319 /* copyout data for gets */ 4320 rtn = iscsi_ioctl_copyout(ics, size, 4321 (caddr_t)arg, mode); 4322 } else { 4323 kmem_free(ics, size); 4324 ics = NULL; 4325 } 4326 } else { 4327 /* set */ 4328 rtn = iscsi_ioctl_set_config_sess(ihp, ics); 4329 if (iscsiboot_prop) { 4330 if (iscsi_cmp_boot_sess_oid(ihp, 4331 ics->ics_oid)) { 4332 /* 4333 * found active session for this object 4334 * or this is initiator object 4335 * with mpxio enabled 4336 */ 4337 if (!iscsi_reconfig_boot_sess(ihp)) { 4338 kmem_free(ics, size); 4339 ics = NULL; 4340 rtn = EINVAL; 4341 break; 4342 } 4343 } 4344 } 4345 kmem_free(ics, size); 4346 ics = NULL; 4347 } 4348 break; 4349 4350 case ISCSI_IS_ACTIVE: 4351 /* 4352 * dhcpagent calls here to check if there are 4353 * active iSCSI sessions 4354 */ 4355 instance = 0; 4356 if (iscsiboot_prop) { 4357 instance = 1; 4358 } 4359 if (!instance) { 4360 rw_enter(&ihp->hba_sess_list_rwlock, 4361 RW_READER); 4362 for (isp = ihp->hba_sess_list; isp; 4363 isp = isp->sess_next) { 4364 if ((isp->sess_state == 4365 ISCSI_SESS_STATE_LOGGED_IN) && 4366 (isp->sess_lun_list != 4367 NULL)) { 4368 instance = 1; 4369 break; 4370 } 4371 } 4372 rw_exit(&ihp->hba_sess_list_rwlock); 4373 } 4374 size = sizeof (instance); 4375 if (ddi_copyout(&instance, (caddr_t)arg, size, 4376 mode) != 0) { 4377 rtn = EFAULT; 4378 } 4379 break; 4380 4381 case ISCSI_BOOTPROP_GET: 4382 size = sizeof (*bootProp); 4383 bootProp = iscsi_ioctl_copyin((caddr_t)arg, mode, size); 4384 if (bootProp == NULL) { 4385 rtn = EFAULT; 4386 break; 4387 } 4388 bootProp->hba_mpxio_enabled = 4389 iscsi_chk_bootlun_mpxio(ihp); 4390 if (iscsiboot_prop == NULL) { 4391 bootProp->iscsiboot = 0; 4392 rtn = iscsi_ioctl_copyout(bootProp, size, 4393 (caddr_t)arg, mode); 4394 break; 4395 } else { 4396 bootProp->iscsiboot = 1; 4397 } 4398 4399 if (iscsiboot_prop->boot_init.ini_name != NULL) { 4400 (void) strncpy((char *)bootProp->ini_name.n_name, 4401 (char *)iscsiboot_prop->boot_init.ini_name, 4402 ISCSI_MAX_NAME_LEN); 4403 } 4404 if (iscsiboot_prop->boot_init.ini_chap_name != NULL) { 4405 bootProp->auth.a_auth_method = authMethodCHAP; 4406 (void) strncpy((char *)bootProp->ini_chap.c_user, 4407 (char *)iscsiboot_prop->boot_init.ini_chap_name, 4408 ISCSI_MAX_NAME_LEN); 4409 (void) strncpy((char *)bootProp->ini_chap.c_secret, 4410 (char *)iscsiboot_prop->boot_init.ini_chap_sec, 4411 ISCSI_CHAP_SECRET_LEN); 4412 if (iscsiboot_prop->boot_tgt.tgt_chap_name != 4413 NULL) { 4414 bootProp->auth.a_bi_auth = B_TRUE; 4415 } else { 4416 bootProp->auth.a_bi_auth = B_FALSE; 4417 } 4418 } 4419 if (iscsiboot_prop->boot_tgt.tgt_name != NULL) { 4420 (void) strncpy((char *)bootProp->tgt_name.n_name, 4421 (char *)iscsiboot_prop->boot_tgt.tgt_name, 4422 ISCSI_MAX_NAME_LEN); 4423 } 4424 if (iscsiboot_prop->boot_tgt.tgt_chap_name != NULL) { 4425 (void) strncpy((char *)bootProp->tgt_chap.c_user, 4426 (char *)iscsiboot_prop->boot_tgt.tgt_chap_name, 4427 ISCSI_MAX_NAME_LEN); 4428 (void) strncpy((char *)bootProp->tgt_chap.c_secret, 4429 (char *)iscsiboot_prop->boot_tgt.tgt_chap_sec, 4430 ISCSI_CHAP_SECRET_LEN); 4431 } 4432 4433 rtn = iscsi_ioctl_copyout(bootProp, size, (caddr_t)arg, mode); 4434 break; 4435 4436 case ISCSI_TUNABLE_PARAM_SET: 4437 tpss = (iscsi_tunable_object_t *)kmem_alloc(sizeof (*tpss), 4438 KM_SLEEP); 4439 if (ddi_copyin((caddr_t)arg, tpss, sizeof (*tpss), mode)) { 4440 rtn = EFAULT; 4441 kmem_free(tpss, sizeof (*tpss)); 4442 break; 4443 } 4444 rtn = iscsi_ioctl_set_tunable_param(ihp, tpss); 4445 kmem_free(tpss, sizeof (*tpss)); 4446 break; 4447 4448 case ISCSI_TUNABLE_PARAM_GET: 4449 tpsg = (iscsi_tunable_object_t *)kmem_alloc(sizeof (*tpsg), 4450 KM_SLEEP); 4451 if (ddi_copyin((caddr_t)arg, tpsg, sizeof (*tpsg), mode)) { 4452 rtn = EFAULT; 4453 kmem_free(tpsg, sizeof (*tpsg)); 4454 break; 4455 } 4456 if (tpsg->t_oid == ihp->hba_oid) { 4457 /* initiator */ 4458 name = ihp->hba_name; 4459 if (iscsi_get_persisted_tunable_param((uchar_t *)name, 4460 tpsg) == 1) { 4461 /* 4462 * no persisted tunable parameters found 4463 * for iscsi initiator, use default tunable 4464 * params for initiator node. 4465 */ 4466 iscsi_get_tunable_default(tpsg); 4467 } 4468 } else { 4469 /* check whether it is a target oid */ 4470 name = iscsi_targetparam_get_name(tpsg->t_oid); 4471 if (name == NULL) { 4472 /* invalid node name */ 4473 rtn = EINVAL; 4474 kmem_free(tpsg, sizeof (*tpsg)); 4475 break; 4476 } 4477 if (iscsi_get_persisted_tunable_param((uchar_t *)name, 4478 tpsg) == 1) { 4479 /* 4480 * no persisted tunable parameters found for 4481 * iscsi target, use initiator's configure. 4482 */ 4483 if (iscsi_get_persisted_tunable_param( 4484 (uchar_t *)ihp->hba_name, tpsg) == -1) { 4485 /* 4486 * No initiator tunable parameters set 4487 * use default value for target 4488 */ 4489 iscsi_get_tunable_default(tpsg); 4490 } 4491 } 4492 } 4493 4494 if (ddi_copyout(tpsg, (caddr_t)arg, 4495 sizeof (iscsi_tunable_object_t), mode) != 0) { 4496 rtn = EFAULT; 4497 } 4498 kmem_free(tpsg, sizeof (*tpsg)); 4499 break; 4500 4501 default: 4502 rtn = ENOTTY; 4503 cmn_err(CE_NOTE, "unrecognized ioctl 0x%x", cmd); 4504 } /* end of ioctl type switch/cases */ 4505 4506 if ((cmd != ISCSI_SMF_ONLINE) && (cmd != ISCSI_SMF_OFFLINE) && 4507 (cmd != ISCSI_SMF_GET)) { 4508 /* other cmds need to release the service */ 4509 iscsi_client_release_service(ihp); 4510 } 4511 4512 return (rtn); 4513 } 4514 4515 /* 4516 * +--------------------------------------------------------------------+ 4517 * | End of cb_ops routines | 4518 * +--------------------------------------------------------------------+ 4519 */ 4520 4521 4522 /* 4523 * +--------------------------------------------------------------------+ 4524 * | Common scsi_tran support routines | 4525 * +--------------------------------------------------------------------+ 4526 */ 4527 4528 /* 4529 * iscsi_i_commoncap -- SCSA host adapter get/set capability routines. 4530 * 4531 * Need to determine if any of these can be determined through the iSCSI 4532 * protocol. For now just return error on most. 4533 */ 4534 /* ARGSUSED */ 4535 static int 4536 iscsi_i_commoncap(struct scsi_address *ap, char *cap, int val, 4537 int tgtonly, int doset) 4538 { 4539 int rtn; 4540 int cidx; 4541 iscsi_lun_t *ilp; 4542 4543 ASSERT((ap)->a_hba_tran->tran_hba_private != NULL); 4544 ilp = (iscsi_lun_t *)((ap)->a_hba_tran->tran_tgt_private); 4545 ASSERT(ilp != NULL); 4546 4547 if (cap == (char *)0) { 4548 return (FALSE); 4549 } 4550 4551 cidx = scsi_hba_lookup_capstr(cap); 4552 if (cidx == -1) { 4553 return (cidx); 4554 } 4555 4556 /* 4557 * Process setcap request. 4558 */ 4559 if (doset) { 4560 /* 4561 * At present, we can only set binary (0/1) values 4562 */ 4563 switch (cidx) { 4564 case SCSI_CAP_LUN_RESET: 4565 if (val) { 4566 ilp->lun_cap |= ISCSI_LUN_CAP_RESET; 4567 } else { 4568 ilp->lun_cap &= ~ISCSI_LUN_CAP_RESET; 4569 } 4570 rtn = TRUE; 4571 break; 4572 default: 4573 /* 4574 * None of these are settable via 4575 * the capability interface. 4576 */ 4577 rtn = FALSE; 4578 break; 4579 } 4580 4581 /* 4582 * Process getcap request. 4583 */ 4584 } else { 4585 switch (cidx) { 4586 case SCSI_CAP_DMA_MAX: 4587 /* no DMA, Psuedo value */ 4588 rtn = INT32_MAX; 4589 break; 4590 case SCSI_CAP_INITIATOR_ID: 4591 rtn = 7; 4592 break; 4593 case SCSI_CAP_ARQ: 4594 case SCSI_CAP_RESET_NOTIFICATION: 4595 case SCSI_CAP_TAGGED_QING: 4596 rtn = TRUE; 4597 break; 4598 case SCSI_CAP_SCSI_VERSION: 4599 rtn = SCSI_VERSION_3; 4600 break; 4601 case SCSI_CAP_INTERCONNECT_TYPE: 4602 rtn = INTERCONNECT_FABRIC; 4603 break; 4604 case SCSI_CAP_LUN_RESET: 4605 rtn = ((ilp->lun_cap & ISCSI_LUN_CAP_RESET) != 0) ? 4606 TRUE : FALSE; 4607 break; 4608 case SCSI_CAP_CDB_LEN: 4609 /* 4610 * iSCSI RFC 3720 defines a default 16 byte 4611 * CDB as part of the Basic Header Segment 4612 * (BHS) (10.2.1) and allows for an Additional 4613 * Header Segment (AHS) Length of 255 * 4 4614 * (10.2.1.5). The AHS length can be used 4615 * for different purposes two of which are 4616 * Extended CDB ADS (10.2.2.3) and Bidirectional 4617 * Expected Read-Data Length AHS (10.2.2.4). 4618 * The largest header of these consumes is 4619 * 32 bytes. So the total Max CDB Length is 4620 * 16 + ((255 * 4 ) - 32) = 1004. 4621 */ 4622 rtn = 1004; 4623 break; 4624 default: 4625 rtn = UNDEFINED; 4626 break; 4627 } 4628 } 4629 return (rtn); 4630 } 4631 4632 /* 4633 * iscsi_virt_lun_init - attempts to complete a mdi/scsi_vhci binding 4634 * 4635 * This routine is used to associate the tran_tgt_private to our ilp 4636 * structure. This function is indirectly called from our 4637 * iscsi_lun_create_xxx routines. These routines must prevent 4638 * the session and lun lists from changing during this call. 4639 */ 4640 /* ARGSUSED */ 4641 static int 4642 iscsi_virt_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 4643 scsi_hba_tran_t *hba_tran, struct scsi_device *sd) 4644 { 4645 iscsi_lun_t *ilp = NULL; 4646 iscsi_lun_t *ilp_check = NULL; 4647 iscsi_sess_t *isp = NULL; 4648 char *lun_guid = NULL; 4649 mdi_pathinfo_t *pip = NULL; 4650 iscsi_hba_t *ihp = (iscsi_hba_t *)hba_tran->tran_hba_private; 4651 char target_port_name[MAX_NAME_PROP_SIZE]; 4652 4653 /* 4654 * Here's a nice little piece of undocumented stuff. 4655 */ 4656 if ((pip = (mdi_pathinfo_t *)sd->sd_private) == NULL) { 4657 /* 4658 * Very bad news if this occurs. Somehow SCSI_vhci has 4659 * lost the pathinfo node for this target. 4660 */ 4661 return (DDI_NOT_WELL_FORMED); 4662 } 4663 4664 ilp = (iscsi_lun_t *)mdi_pi_get_phci_private(pip); 4665 4666 /* 4667 * +----------------------------------------------------+ 4668 * | Looking to find the target device via the property | 4669 * | is not required since the driver can easily get | 4670 * | this information from the mdi_phci_get_private() | 4671 * | call above. This is just a consistency check | 4672 * | which can be removed. | 4673 */ 4674 if (mdi_prop_lookup_string(pip, MDI_GUID, &lun_guid) != 4675 DDI_PROP_SUCCESS) { 4676 return (DDI_NOT_WELL_FORMED); 4677 } 4678 4679 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) { 4680 4681 /* If this isn't the matching session continue */ 4682 if (ilp->lun_sess != isp) { 4683 continue; 4684 } 4685 4686 /* 4687 * We are already holding the lun list rwlock 4688 * for this thread on the callers side of mdi_pi_online 4689 * or ndi_devi_online. Which lead to this functions 4690 * call. 4691 */ 4692 for (ilp_check = isp->sess_lun_list; ilp_check; 4693 ilp_check = ilp_check->lun_next) { 4694 4695 /* 4696 * If this is the matching LUN and contains 4697 * the same LUN GUID then break we found our 4698 * match. 4699 */ 4700 if ((ilp == ilp_check) && 4701 (strcmp(lun_guid, ilp_check->lun_guid) == 0)) { 4702 break; 4703 } 4704 } 4705 if (ilp_check != NULL) { 4706 break; 4707 } 4708 } 4709 4710 /* 4711 * Free resource that's no longer required. 4712 */ 4713 if (lun_guid != NULL) 4714 (void) mdi_prop_free(lun_guid); 4715 4716 if (ilp_check == NULL) { 4717 /* 4718 * Failed to find iSCSI LUN in HBA chain based 4719 * on the GUID that was stored as a property on 4720 * the pathinfo node. 4721 */ 4722 return (DDI_NOT_WELL_FORMED); 4723 } 4724 4725 if (ilp != ilp_check) { 4726 /* 4727 * The iSCSI target that we found on the HBA link is 4728 * different than the iSCSI target that was stored as 4729 * private data on the pathinfo node. 4730 */ 4731 return (DDI_NOT_WELL_FORMED); 4732 } 4733 /* 4734 * | End of consistency check | 4735 * +----------------------------------------------------+ 4736 */ 4737 4738 hba_tran->tran_tgt_private = ilp; 4739 4740 target_port_name[0] = '\0'; 4741 if (ilp->lun_sess->sess_tpgt_conf == ISCSI_DEFAULT_TPGT) { 4742 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE, 4743 "%02x%02x%02x%02x%02x%02x,%s", 4744 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1], 4745 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3], 4746 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5], 4747 ilp->lun_sess->sess_name); 4748 } else { 4749 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE, 4750 "%02x%02x%02x%02x%02x%02x,%s,%d", 4751 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1], 4752 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3], 4753 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5], 4754 ilp->lun_sess->sess_name, ilp->lun_sess->sess_tpgt_conf); 4755 } 4756 4757 if (mdi_prop_update_string(pip, 4758 SCSI_ADDR_PROP_TARGET_PORT, target_port_name) != DDI_PROP_SUCCESS) { 4759 cmn_err(CE_WARN, "iscsi_virt_lun_init: Creating '" 4760 SCSI_ADDR_PROP_TARGET_PORT "' property on Path(%p) " 4761 "for Target(%s), Lun(%d) Failed", 4762 (void *)pip, ilp->lun_sess->sess_name, ilp->lun_num); 4763 } 4764 4765 return (DDI_SUCCESS); 4766 } 4767 4768 /* 4769 * iscsi_phys_lun_init - attempts to complete a ndi binding 4770 * 4771 * This routine is used to associate the tran_tgt_private to our 4772 * ilp structure. This function is indirectly called from our 4773 * iscsi_lun_create_xxx routines. These routines must prevent 4774 * the session and lun lists from changing during this call. 4775 */ 4776 static int 4777 iscsi_phys_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 4778 scsi_hba_tran_t *hba_tran, struct scsi_device *sd) 4779 { 4780 int rtn = DDI_SUCCESS; 4781 iscsi_hba_t *ihp = NULL; 4782 iscsi_sess_t *isp = NULL; 4783 iscsi_lun_t *ilp = NULL; 4784 char target_port_name[MAX_NAME_PROP_SIZE]; 4785 int *words = NULL; 4786 uint_t nwords = 0; 4787 4788 ASSERT(hba_dip); 4789 ASSERT(lun_dip); 4790 ASSERT(hba_tran); 4791 ASSERT(sd); 4792 ihp = (iscsi_hba_t *)hba_tran->tran_hba_private; 4793 ASSERT(ihp); 4794 4795 if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, lun_dip, 4796 DDI_PROP_DONTPASS, LUN_PROP, &words, &nwords) != DDI_PROP_SUCCESS) { 4797 cmn_err(CE_WARN, "iscsi_phys_lun_init: Returning DDI_FAILURE:" 4798 "lun for %s (instance %d)", ddi_get_name(lun_dip), 4799 ddi_get_instance(lun_dip)); 4800 return (DDI_FAILURE); 4801 } 4802 4803 if (nwords == 0) { 4804 ddi_prop_free(words); 4805 return (DDI_FAILURE); 4806 } 4807 4808 ASSERT(words != NULL); 4809 4810 /* See if we already created this session */ 4811 4812 /* Walk the HBA's session list */ 4813 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) { 4814 /* compare target name as the unique identifier */ 4815 if (sd->sd_address.a_target == isp->sess_oid) { 4816 /* found match */ 4817 break; 4818 } 4819 } 4820 4821 /* If we found matching session continue searching for tgt */ 4822 if (isp != NULL) { 4823 /* 4824 * Search for the matching iscsi lun structure. We don't 4825 * need to hold the READER for the lun list at this point. 4826 * because the tran_get_name is being called from the online 4827 * function which is already holding a reader on the lun 4828 * list. 4829 */ 4830 for (ilp = isp->sess_lun_list; ilp; ilp = ilp->lun_next) { 4831 if (*words == ilp->lun_num) { 4832 /* found match */ 4833 break; 4834 } 4835 } 4836 4837 if (ilp != NULL) { 4838 /* 4839 * tgt found path it to the tran_lun_private 4840 * this is used later for fast access on 4841 * init_pkt and start 4842 */ 4843 hba_tran->tran_tgt_private = ilp; 4844 } else { 4845 /* tgt not found */ 4846 ddi_prop_free(words); 4847 return (DDI_FAILURE); 4848 } 4849 } else { 4850 /* sess not found */ 4851 ddi_prop_free(words); 4852 return (DDI_FAILURE); 4853 } 4854 ddi_prop_free(words); 4855 4856 target_port_name[0] = '\0'; 4857 if (ilp->lun_sess->sess_tpgt_conf == ISCSI_DEFAULT_TPGT) { 4858 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE, 4859 "%02x%02x%02x%02x%02x%02x,%s", 4860 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1], 4861 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3], 4862 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5], 4863 ilp->lun_sess->sess_name); 4864 } else { 4865 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE, 4866 "%02x%02x%02x%02x%02x%02x,%s,%d", 4867 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1], 4868 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3], 4869 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5], 4870 ilp->lun_sess->sess_name, ilp->lun_sess->sess_tpgt_conf); 4871 } 4872 4873 if (ddi_prop_update_string(DDI_DEV_T_NONE, lun_dip, 4874 SCSI_ADDR_PROP_TARGET_PORT, target_port_name) != DDI_PROP_SUCCESS) { 4875 cmn_err(CE_WARN, "iscsi_phys_lun_init: Creating '" 4876 SCSI_ADDR_PROP_TARGET_PORT "' property on Target(%s), " 4877 "Lun(%d) Failed", ilp->lun_sess->sess_name, ilp->lun_num); 4878 } 4879 4880 return (rtn); 4881 } 4882 4883 /* 4884 * +--------------------------------------------------------------------+ 4885 * | End of scsi_tran support routines | 4886 * +--------------------------------------------------------------------+ 4887 */ 4888 4889 /* 4890 * +--------------------------------------------------------------------+ 4891 * | Begin of struct utility routines | 4892 * +--------------------------------------------------------------------+ 4893 */ 4894 4895 4896 /* 4897 * iscsi_set_default_login_params - This function sets the 4898 * driver default login params. This is using during the 4899 * creation of our iSCSI HBA structure initialization by 4900 * could be used at other times to reset back to the defaults. 4901 */ 4902 void 4903 iscsi_set_default_login_params(iscsi_login_params_t *params) 4904 { 4905 params->immediate_data = ISCSI_DEFAULT_IMMEDIATE_DATA; 4906 params->initial_r2t = ISCSI_DEFAULT_INITIALR2T; 4907 params->first_burst_length = ISCSI_DEFAULT_FIRST_BURST_LENGTH; 4908 params->max_burst_length = ISCSI_DEFAULT_MAX_BURST_LENGTH; 4909 params->data_pdu_in_order = ISCSI_DEFAULT_DATA_PDU_IN_ORDER; 4910 params->data_sequence_in_order = ISCSI_DEFAULT_DATA_SEQUENCE_IN_ORDER; 4911 params->default_time_to_wait = ISCSI_DEFAULT_TIME_TO_WAIT; 4912 params->default_time_to_retain = ISCSI_DEFAULT_TIME_TO_RETAIN; 4913 params->header_digest = ISCSI_DEFAULT_HEADER_DIGEST; 4914 params->data_digest = ISCSI_DEFAULT_DATA_DIGEST; 4915 params->max_recv_data_seg_len = ISCSI_DEFAULT_MAX_RECV_SEG_LEN; 4916 params->max_xmit_data_seg_len = ISCSI_DEFAULT_MAX_XMIT_SEG_LEN; 4917 params->max_connections = ISCSI_DEFAULT_MAX_CONNECTIONS; 4918 params->max_outstanding_r2t = ISCSI_DEFAULT_MAX_OUT_R2T; 4919 params->error_recovery_level = ISCSI_DEFAULT_ERROR_RECOVERY_LEVEL; 4920 params->ifmarker = ISCSI_DEFAULT_IFMARKER; 4921 params->ofmarker = ISCSI_DEFAULT_OFMARKER; 4922 } 4923 4924 /* Helper function to sets the driver default tunable parameters */ 4925 static void 4926 iscsi_set_default_tunable_params(iscsi_tunable_params_t *params) 4927 { 4928 params->recv_login_rsp_timeout = ISCSI_DEFAULT_RX_TIMEOUT_VALUE; 4929 params->conn_login_max = ISCSI_DEFAULT_CONN_DEFAULT_LOGIN_MAX; 4930 params->polling_login_delay = ISCSI_DEFAULT_LOGIN_POLLING_DELAY; 4931 } 4932 4933 /* 4934 * +--------------------------------------------------------------------+ 4935 * | End of struct utility routines | 4936 * +--------------------------------------------------------------------+ 4937 */ 4938 4939 /* 4940 * +--------------------------------------------------------------------+ 4941 * | Begin of ioctl utility routines | 4942 * +--------------------------------------------------------------------+ 4943 */ 4944 4945 /* 4946 * iscsi_get_param - This function is a helper to ISCSI_GET_PARAM 4947 * IOCTL 4948 */ 4949 int 4950 iscsi_get_param(iscsi_login_params_t *params, boolean_t valid_flag, 4951 iscsi_param_get_t *ipgp) { 4952 int rtn = 0; 4953 4954 /* ---- Default to settable, possibly changed later ---- */ 4955 ipgp->g_value.v_valid = valid_flag; 4956 ipgp->g_value.v_settable = B_TRUE; 4957 4958 switch (ipgp->g_param) { 4959 /* 4960 * Boolean parameters 4961 */ 4962 case ISCSI_LOGIN_PARAM_DATA_SEQUENCE_IN_ORDER: 4963 ipgp->g_value.v_bool.b_current = 4964 params->data_sequence_in_order; 4965 ipgp->g_value.v_bool.b_default = 4966 ISCSI_DEFAULT_DATA_SEQUENCE_IN_ORDER; 4967 break; 4968 case ISCSI_LOGIN_PARAM_IMMEDIATE_DATA: 4969 ipgp->g_value.v_bool.b_current = 4970 params->immediate_data; 4971 ipgp->g_value.v_bool.b_default = 4972 ISCSI_DEFAULT_IMMEDIATE_DATA; 4973 break; 4974 case ISCSI_LOGIN_PARAM_INITIAL_R2T: 4975 ipgp->g_value.v_bool.b_current = 4976 params->initial_r2t; 4977 ipgp->g_value.v_bool.b_default = 4978 ISCSI_DEFAULT_IMMEDIATE_DATA; 4979 break; 4980 case ISCSI_LOGIN_PARAM_DATA_PDU_IN_ORDER: 4981 ipgp->g_value.v_bool.b_current = 4982 params->data_pdu_in_order; 4983 ipgp->g_value.v_bool.b_default = 4984 ISCSI_DEFAULT_DATA_PDU_IN_ORDER; 4985 break; 4986 4987 /* 4988 * Integer parameters 4989 */ 4990 case ISCSI_LOGIN_PARAM_HEADER_DIGEST: 4991 ipgp->g_value.v_integer.i_current = params->header_digest; 4992 ipgp->g_value.v_integer.i_default = ISCSI_DEFAULT_HEADER_DIGEST; 4993 ipgp->g_value.v_integer.i_min = 0; 4994 ipgp->g_value.v_integer.i_max = ISCSI_MAX_HEADER_DIGEST; 4995 ipgp->g_value.v_integer.i_incr = 1; 4996 break; 4997 case ISCSI_LOGIN_PARAM_DATA_DIGEST: 4998 ipgp->g_value.v_integer.i_current = params->data_digest; 4999 ipgp->g_value.v_integer.i_default = ISCSI_DEFAULT_DATA_DIGEST; 5000 ipgp->g_value.v_integer.i_min = 0; 5001 ipgp->g_value.v_integer.i_max = ISCSI_MAX_DATA_DIGEST; 5002 ipgp->g_value.v_integer.i_incr = 1; 5003 break; 5004 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_RETAIN: 5005 ipgp->g_value.v_integer.i_current = 5006 params->default_time_to_retain; 5007 ipgp->g_value.v_integer.i_default = 5008 ISCSI_DEFAULT_TIME_TO_RETAIN; 5009 ipgp->g_value.v_integer.i_min = 0; 5010 ipgp->g_value.v_integer.i_max = ISCSI_MAX_TIME2RETAIN; 5011 ipgp->g_value.v_integer.i_incr = 1; 5012 break; 5013 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_WAIT: 5014 ipgp->g_value.v_integer.i_current = 5015 params->default_time_to_wait; 5016 ipgp->g_value.v_integer.i_default = 5017 ISCSI_DEFAULT_TIME_TO_WAIT; 5018 ipgp->g_value.v_integer.i_min = 0; 5019 ipgp->g_value.v_integer.i_max = ISCSI_MAX_TIME2WAIT; 5020 ipgp->g_value.v_integer.i_incr = 1; 5021 break; 5022 case ISCSI_LOGIN_PARAM_ERROR_RECOVERY_LEVEL: 5023 ipgp->g_value.v_integer.i_current = 5024 params->error_recovery_level; 5025 ipgp->g_value.v_integer.i_default = 5026 ISCSI_DEFAULT_ERROR_RECOVERY_LEVEL; 5027 ipgp->g_value.v_integer.i_min = 0; 5028 ipgp->g_value.v_integer.i_max = ISCSI_MAX_ERROR_RECOVERY_LEVEL; 5029 ipgp->g_value.v_integer.i_incr = 1; 5030 ipgp->g_value.v_settable = B_FALSE; 5031 break; 5032 case ISCSI_LOGIN_PARAM_FIRST_BURST_LENGTH: 5033 ipgp->g_value.v_integer.i_current = 5034 params->first_burst_length; 5035 ipgp->g_value.v_integer.i_default = 5036 ISCSI_DEFAULT_FIRST_BURST_LENGTH; 5037 ipgp->g_value.v_integer.i_min = 512; 5038 ipgp->g_value.v_integer.i_max = ISCSI_MAX_FIRST_BURST_LENGTH; 5039 ipgp->g_value.v_integer.i_incr = 1; 5040 break; 5041 case ISCSI_LOGIN_PARAM_MAX_BURST_LENGTH: 5042 ipgp->g_value.v_integer.i_current = 5043 params->max_burst_length; 5044 ipgp->g_value.v_integer.i_default = 5045 ISCSI_DEFAULT_MAX_BURST_LENGTH; 5046 ipgp->g_value.v_integer.i_min = 512; 5047 ipgp->g_value.v_integer.i_max = ISCSI_MAX_BURST_LENGTH; 5048 ipgp->g_value.v_integer.i_incr = 1; 5049 break; 5050 case ISCSI_LOGIN_PARAM_MAX_CONNECTIONS: 5051 ipgp->g_value.v_integer.i_current = 5052 params->max_connections; 5053 ipgp->g_value.v_settable = B_FALSE; 5054 ipgp->g_value.v_integer.i_default = 5055 ISCSI_DEFAULT_MAX_CONNECTIONS; 5056 ipgp->g_value.v_integer.i_min = 1; 5057 ipgp->g_value.v_integer.i_max = ISCSI_MAX_CONNECTIONS; 5058 ipgp->g_value.v_integer.i_incr = 1; 5059 break; 5060 case ISCSI_LOGIN_PARAM_OUTSTANDING_R2T: 5061 ipgp->g_value.v_integer.i_current = 5062 params->max_outstanding_r2t; 5063 ipgp->g_value.v_settable = B_FALSE; 5064 ipgp->g_value.v_integer.i_default = 5065 ISCSI_DEFAULT_MAX_OUT_R2T; 5066 ipgp->g_value.v_integer.i_min = 1; 5067 ipgp->g_value.v_integer.i_max = ISCSI_MAX_OUTSTANDING_R2T; 5068 ipgp->g_value.v_integer.i_incr = 1; 5069 break; 5070 case ISCSI_LOGIN_PARAM_MAX_RECV_DATA_SEGMENT_LENGTH: 5071 ipgp->g_value.v_integer.i_current = 5072 params->max_recv_data_seg_len; 5073 ipgp->g_value.v_integer.i_default = 5074 ISCSI_DEFAULT_MAX_RECV_SEG_LEN; 5075 ipgp->g_value.v_integer.i_min = 512; 5076 ipgp->g_value.v_integer.i_max = 5077 ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH; 5078 ipgp->g_value.v_integer.i_incr = 1; 5079 break; 5080 default: 5081 rtn = EINVAL; 5082 } 5083 5084 return (rtn); 5085 } 5086 5087 /* 5088 * +--------------------------------------------------------------------+ 5089 * | End of ioctl utility routines | 5090 * +--------------------------------------------------------------------+ 5091 */ 5092 5093 /* 5094 * iscsi_get_name_from_iqn - Translates a normal iqn/eui into a 5095 * IEEE safe address. IEEE addresses have a number of characters 5096 * set aside as reserved. 5097 */ 5098 static void 5099 iscsi_get_name_from_iqn(char *name, int name_max_len) 5100 { 5101 char *tmp = NULL; 5102 char *oldch = NULL; 5103 char *newch = NULL; 5104 5105 tmp = kmem_zalloc(MAX_GET_NAME_SIZE, KM_SLEEP); 5106 5107 for (oldch = &name[0], newch = &tmp[0]; *oldch != '\0'; 5108 oldch++, newch++) { 5109 switch (*oldch) { 5110 case ':': 5111 *newch++ = '%'; 5112 *newch++ = '3'; 5113 *newch = 'A'; 5114 break; 5115 case ' ': 5116 *newch++ = '%'; 5117 *newch++ = '2'; 5118 *newch = '0'; 5119 break; 5120 case '@': 5121 *newch++ = '%'; 5122 *newch++ = '4'; 5123 *newch = '0'; 5124 break; 5125 case '/': 5126 *newch++ = '%'; 5127 *newch++ = '2'; 5128 *newch = 'F'; 5129 break; 5130 default: 5131 *newch = *oldch; 5132 } 5133 } 5134 (void) strncpy(name, tmp, name_max_len); 5135 kmem_free(tmp, MAX_GET_NAME_SIZE); 5136 } 5137 5138 /* 5139 * iscsi_get_name_to_iqn - Converts IEEE safe address back 5140 * into a iscsi iqn/eui. 5141 */ 5142 static void 5143 iscsi_get_name_to_iqn(char *name, int name_max_len) 5144 { 5145 char *tmp = NULL; 5146 char *oldch = NULL; 5147 char *newch = NULL; 5148 5149 tmp = kmem_zalloc(MAX_GET_NAME_SIZE, KM_SLEEP); 5150 5151 for (oldch = &name[0], newch = &tmp[0]; *oldch != '\0'; 5152 oldch++, newch++) { 5153 if (*oldch == '%') { 5154 switch (*(oldch+1)) { 5155 case '2': 5156 if (*(oldch+2) == '0') { 5157 *newch = ' '; 5158 oldch += 2; 5159 } else if (*(oldch+2) == 'F') { 5160 *newch = '/'; 5161 oldch += 2; 5162 } else { 5163 *newch = *oldch; 5164 } 5165 break; 5166 case '3': 5167 if (*(oldch+2) == 'A') { 5168 *newch = ':'; 5169 oldch += 2; 5170 } else { 5171 *newch = *oldch; 5172 } 5173 break; 5174 case '4': 5175 if (*(oldch+2) == '0') { 5176 *newch = '@'; 5177 oldch += 2; 5178 } else { 5179 *newch = *oldch; 5180 } 5181 break; 5182 default: 5183 *newch = *oldch; 5184 } 5185 } else { 5186 *newch = *oldch; 5187 } 5188 } 5189 (void) strncpy(name, tmp, name_max_len); 5190 kmem_free(tmp, MAX_GET_NAME_SIZE); 5191 } 5192 5193 /* 5194 * iscsi_get_persisted_param * - a helper to ISCSI_GET_PARAM ioctl 5195 * 5196 * On return 0 means persisted parameter found 5197 */ 5198 int 5199 iscsi_get_persisted_param(uchar_t *name, iscsi_param_get_t *ipgp, 5200 iscsi_login_params_t *params) 5201 { 5202 int rtn = 1; 5203 persistent_param_t *pparam; 5204 5205 if (name == NULL || strlen((char *)name) == 0) { 5206 return (rtn); 5207 } 5208 5209 pparam = (persistent_param_t *)kmem_zalloc(sizeof (*pparam), KM_SLEEP); 5210 5211 if (persistent_param_get((char *)name, pparam) == B_TRUE) { 5212 if (pparam->p_bitmap & (1 << ipgp->g_param)) { 5213 /* Found configured parameter. */ 5214 bcopy(&pparam->p_params, params, sizeof (*params)); 5215 rtn = 0; 5216 } 5217 } 5218 5219 kmem_free(pparam, sizeof (*pparam)); 5220 5221 return (rtn); 5222 } 5223 5224 /* 5225 * iscsi_override_target_default - helper function set the target's default 5226 * login parameter if there is a configured initiator parameter. 5227 * 5228 */ 5229 static void 5230 iscsi_override_target_default(iscsi_hba_t *ihp, iscsi_param_get_t *ipg) 5231 { 5232 persistent_param_t *pp; 5233 iscsi_login_params_t *params; 5234 5235 pp = (persistent_param_t *)kmem_zalloc(sizeof (*pp), KM_SLEEP); 5236 if (persistent_param_get((char *)ihp->hba_name, pp) == B_TRUE) { 5237 if (pp->p_bitmap & (1 << ipg->g_param)) { 5238 params = &pp->p_params; 5239 switch (ipg->g_param) { 5240 case ISCSI_LOGIN_PARAM_DATA_SEQUENCE_IN_ORDER: 5241 ipg->g_value.v_bool.b_default = 5242 params->data_sequence_in_order; 5243 break; 5244 case ISCSI_LOGIN_PARAM_IMMEDIATE_DATA: 5245 ipg->g_value.v_bool.b_default = 5246 params->immediate_data; 5247 break; 5248 case ISCSI_LOGIN_PARAM_INITIAL_R2T: 5249 ipg->g_value.v_bool.b_default = 5250 params->initial_r2t; 5251 break; 5252 case ISCSI_LOGIN_PARAM_DATA_PDU_IN_ORDER: 5253 ipg->g_value.v_bool.b_default = 5254 params->data_pdu_in_order; 5255 break; 5256 case ISCSI_LOGIN_PARAM_HEADER_DIGEST: 5257 ipg->g_value.v_integer.i_default = 5258 params->header_digest; 5259 break; 5260 case ISCSI_LOGIN_PARAM_DATA_DIGEST: 5261 ipg->g_value.v_integer.i_default = 5262 params->data_digest; 5263 break; 5264 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_RETAIN: 5265 ipg->g_value.v_integer.i_default = 5266 params->default_time_to_retain; 5267 break; 5268 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_WAIT: 5269 ipg->g_value.v_integer.i_default = 5270 params->default_time_to_wait; 5271 break; 5272 case ISCSI_LOGIN_PARAM_ERROR_RECOVERY_LEVEL: 5273 ipg->g_value.v_integer.i_default = 5274 params->error_recovery_level; 5275 break; 5276 case ISCSI_LOGIN_PARAM_FIRST_BURST_LENGTH: 5277 ipg->g_value.v_integer.i_default = 5278 params->first_burst_length; 5279 break; 5280 case ISCSI_LOGIN_PARAM_MAX_BURST_LENGTH: 5281 ipg->g_value.v_integer.i_default = 5282 params->max_burst_length; 5283 break; 5284 case ISCSI_LOGIN_PARAM_MAX_CONNECTIONS: 5285 ipg->g_value.v_integer.i_default = 5286 params->max_connections; 5287 break; 5288 case ISCSI_LOGIN_PARAM_OUTSTANDING_R2T: 5289 ipg->g_value.v_integer.i_default = 5290 params->max_outstanding_r2t; 5291 break; 5292 case ISCSI_LOGIN_PARAM_MAX_RECV_DATA_SEGMENT_LENGTH: 5293 ipg->g_value.v_integer.i_default = 5294 params->max_xmit_data_seg_len; 5295 break; 5296 default: 5297 break; 5298 } 5299 } 5300 } 5301 kmem_free(pp, sizeof (*pp)); 5302 } 5303 5304 static boolean_t 5305 iscsi_cmp_boot_sess_oid(iscsi_hba_t *ihp, uint32_t oid) 5306 { 5307 iscsi_sess_t *isp = NULL; 5308 5309 if (iscsi_chk_bootlun_mpxio(ihp)) { 5310 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) { 5311 if ((isp->sess_oid == oid) && isp->sess_boot) { 5312 /* oid is session object */ 5313 break; 5314 } 5315 if ((isp->sess_target_oid == oid) && isp->sess_boot) { 5316 /* 5317 * oid is target object while 5318 * this session is boot session 5319 */ 5320 break; 5321 } 5322 } 5323 if (oid == ihp->hba_oid) { 5324 /* oid is initiator object id */ 5325 return (B_TRUE); 5326 } else if ((isp != NULL) && (isp->sess_boot)) { 5327 /* oid is boot session object id */ 5328 return (B_TRUE); 5329 } 5330 } 5331 return (B_FALSE); 5332 } 5333 5334 /* 5335 * iscsi_client_request_service - request the iSCSI service 5336 * returns true if the service is enabled and increases the count 5337 * returns false if the service is disabled 5338 * blocks until the service status is either enabled or disabled 5339 */ 5340 boolean_t 5341 iscsi_client_request_service(iscsi_hba_t *ihp) { 5342 boolean_t rval = B_TRUE; 5343 5344 mutex_enter(&ihp->hba_service_lock); 5345 while ((ihp->hba_service_status == ISCSI_SERVICE_TRANSITION) || 5346 (ihp->hba_service_client_count == UINT_MAX)) { 5347 cv_wait(&ihp->hba_service_cv, &ihp->hba_service_lock); 5348 } 5349 if (ihp->hba_service_status == ISCSI_SERVICE_ENABLED) { 5350 ihp->hba_service_client_count++; 5351 } else { 5352 rval = B_FALSE; 5353 } 5354 mutex_exit(&ihp->hba_service_lock); 5355 5356 return (rval); 5357 } 5358 5359 /* 5360 * iscsi_client_release_service - decrease the count and wake up 5361 * blocking threads if the count reaches zero 5362 */ 5363 void 5364 iscsi_client_release_service(iscsi_hba_t *ihp) { 5365 mutex_enter(&ihp->hba_service_lock); 5366 ASSERT(ihp->hba_service_client_count > 0); 5367 ihp->hba_service_client_count--; 5368 if (ihp->hba_service_client_count == 0) { 5369 cv_broadcast(&ihp->hba_service_cv); 5370 } 5371 mutex_exit(&ihp->hba_service_lock); 5372 } 5373 5374 /* 5375 * iscsi_enter_service_zone - enter the service zone, should be called 5376 * before doing any modifications to the service status 5377 * return TRUE if the zone is entered 5378 * FALSE if no need to enter the zone 5379 */ 5380 static boolean_t 5381 iscsi_enter_service_zone(iscsi_hba_t *ihp, uint32_t status) { 5382 if ((status != ISCSI_SERVICE_ENABLED) && 5383 (status != ISCSI_SERVICE_DISABLED)) { 5384 return (B_FALSE); 5385 } 5386 5387 mutex_enter(&ihp->hba_service_lock); 5388 while (ihp->hba_service_status == ISCSI_SERVICE_TRANSITION) { 5389 cv_wait(&ihp->hba_service_cv, &ihp->hba_service_lock); 5390 } 5391 if (ihp->hba_service_status == status) { 5392 mutex_exit(&ihp->hba_service_lock); 5393 return (B_FALSE); 5394 } 5395 ihp->hba_service_status = ISCSI_SERVICE_TRANSITION; 5396 while (ihp->hba_service_client_count > 0) { 5397 cv_wait(&ihp->hba_service_cv, &ihp->hba_service_lock); 5398 } 5399 mutex_exit(&ihp->hba_service_lock); 5400 return (B_TRUE); 5401 } 5402 5403 /* 5404 * iscsi_exit_service_zone - exits the service zone and wakes up waiters 5405 */ 5406 static void 5407 iscsi_exit_service_zone(iscsi_hba_t *ihp, uint32_t status) { 5408 if ((status != ISCSI_SERVICE_ENABLED) && 5409 (status != ISCSI_SERVICE_DISABLED)) { 5410 return; 5411 } 5412 5413 mutex_enter(&ihp->hba_service_lock); 5414 ASSERT(ihp->hba_service_status == ISCSI_SERVICE_TRANSITION); 5415 ihp->hba_service_status = status; 5416 cv_broadcast(&ihp->hba_service_cv); 5417 mutex_exit(&ihp->hba_service_lock); 5418 } 5419 5420 static void 5421 iscsi_check_miniroot(iscsi_hba_t *ihp) { 5422 if (strncmp(rootfs.bo_name, "/ramdisk", 8) == 0) { 5423 /* 5424 * in miniroot we don't have the persistent store 5425 * so just to need to ensure an enabled status 5426 */ 5427 ihp->hba_service_status = ISCSI_SERVICE_ENABLED; 5428 } 5429 } 5430 5431 static void 5432 iscsi_get_tunable_default(iscsi_tunable_object_t *param) { 5433 int param_id = 0; 5434 5435 param_id = 1 << (param->t_param - 1); 5436 param->t_set = B_FALSE; 5437 switch (param_id) { 5438 case ISCSI_TUNABLE_PARAM_RX_TIMEOUT_VALUE: 5439 param->t_value.v_integer = ISCSI_DEFAULT_RX_TIMEOUT_VALUE; 5440 break; 5441 case ISCSI_TUNABLE_PARAM_LOGIN_POLLING_DELAY: 5442 param->t_value.v_integer = ISCSI_DEFAULT_LOGIN_POLLING_DELAY; 5443 break; 5444 case ISCSI_TUNABLE_PARAM_CONN_LOGIN_MAX: 5445 param->t_value.v_integer = ISCSI_DEFAULT_CONN_DEFAULT_LOGIN_MAX; 5446 break; 5447 default: 5448 break; 5449 } 5450 } 5451 5452 /* 5453 * iscsi_get_persisted_tunable_param * - a helper to ISCSI_TUNABLE_PARAM_GET 5454 * ioctl 5455 * return: 5456 * 0 persisted tunable parameter found 5457 * 1 persisted tunable parameter not found 5458 */ 5459 static int 5460 iscsi_get_persisted_tunable_param(uchar_t *name, iscsi_tunable_object_t *tpsg) 5461 { 5462 int rtn = 1; 5463 int param_id = 0; 5464 persistent_tunable_param_t *pparam; 5465 5466 if ((name == NULL) || strlen((char *)name) == 0) { 5467 return (rtn); 5468 } 5469 5470 tpsg->t_set = B_FALSE; 5471 pparam = (persistent_tunable_param_t *)kmem_zalloc(sizeof (*pparam), 5472 KM_SLEEP); 5473 if (persistent_get_tunable_param((char *)name, pparam) == B_TRUE) { 5474 if (pparam->p_bitmap & (1 << (tpsg->t_param - 1))) { 5475 tpsg->t_set = B_TRUE; 5476 param_id = 1 << (tpsg->t_param - 1); 5477 switch (param_id) { 5478 case ISCSI_TUNABLE_PARAM_RX_TIMEOUT_VALUE: 5479 tpsg->t_value.v_integer = 5480 pparam->p_params.recv_login_rsp_timeout; 5481 break; 5482 case ISCSI_TUNABLE_PARAM_LOGIN_POLLING_DELAY: 5483 tpsg->t_value.v_integer = 5484 pparam->p_params.polling_login_delay; 5485 break; 5486 case ISCSI_TUNABLE_PARAM_CONN_LOGIN_MAX: 5487 tpsg->t_value.v_integer = 5488 pparam->p_params.conn_login_max; 5489 break; 5490 default: 5491 break; 5492 } 5493 rtn = 0; 5494 } 5495 } 5496 5497 kmem_free(pparam, sizeof (*pparam)); 5498 5499 return (rtn); 5500 } 5501