1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2000 by Cisco Systems, Inc. All rights reserved. 23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 * 26 * iSCSI Software Initiator 27 */ 28 29 /* 30 * Framework interface routines for iSCSI 31 */ 32 33 #include "iscsi.h" /* main header */ 34 #include <sys/iscsi_protocol.h> /* protocol structs */ 35 #include <sys/scsi/adapters/iscsi_if.h> /* ioctl interfaces */ 36 #include "iscsi_targetparam.h" 37 #include "persistent.h" 38 #include <sys/scsi/adapters/iscsi_door.h> 39 #include <sys/dlpi.h> 40 #include <sys/utsname.h> 41 #include "isns_client.h" 42 #include "isns_protocol.h" 43 #include <sys/bootprops.h> 44 #include <sys/types.h> 45 #include <sys/bootconf.h> 46 47 #define ISCSI_NAME_VERSION "iSCSI Initiator v-1.55" 48 49 #define MAX_GET_NAME_SIZE 1024 50 #define MAX_NAME_PROP_SIZE 256 51 #define UNDEFINED -1 52 53 /* 54 * +--------------------------------------------------------------------+ 55 * | iscsi globals | 56 * +--------------------------------------------------------------------+ 57 */ 58 void *iscsi_state; 59 kmutex_t iscsi_oid_mutex; 60 uint32_t iscsi_oid; 61 int iscsi_nop_delay = ISCSI_DEFAULT_NOP_DELAY; 62 int iscsi_rx_window = ISCSI_DEFAULT_RX_WINDOW; 63 int iscsi_rx_max_window = ISCSI_DEFAULT_RX_MAX_WINDOW; 64 boolean_t iscsi_logging = B_FALSE; 65 66 extern ib_boot_prop_t *iscsiboot_prop; 67 extern int modrootloaded; 68 extern struct bootobj rootfs; 69 70 /* 71 * +--------------------------------------------------------------------+ 72 * | iscsi.c prototypes | 73 * +--------------------------------------------------------------------+ 74 */ 75 static int iscsi_getinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, 76 void *arg, void **result); 77 static int iscsi_attach(dev_info_t *dip, ddi_attach_cmd_t cmd); 78 static int iscsi_detach(dev_info_t *dip, ddi_detach_cmd_t cmd); 79 80 /* scsi_tran prototypes */ 81 static int iscsi_tran_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 82 scsi_hba_tran_t *hba_tran, struct scsi_device *sd); 83 static int iscsi_tran_lun_probe(struct scsi_device *sd, int (*callback) ()); 84 static struct scsi_pkt *iscsi_tran_init_pkt(struct scsi_address *ap, 85 struct scsi_pkt *pkt, struct buf *bp, int cmdlen, int statuslen, 86 int tgtlen, int flags, int (*callback) (), caddr_t arg); 87 static void iscsi_tran_lun_free(dev_info_t *hba_dip, dev_info_t *lun_dip, 88 scsi_hba_tran_t *hba_tran, struct scsi_device *sd); 89 static int iscsi_tran_start(struct scsi_address *ap, struct scsi_pkt *pkt); 90 static int iscsi_tran_abort(struct scsi_address *ap, struct scsi_pkt *pkt); 91 static int iscsi_tran_reset(struct scsi_address *ap, int level); 92 static int iscsi_tran_getcap(struct scsi_address *ap, char *cap, int whom); 93 static int iscsi_tran_setcap(struct scsi_address *ap, char *cap, 94 int value, int whom); 95 static void iscsi_tran_destroy_pkt(struct scsi_address *ap, 96 struct scsi_pkt *pkt); 97 static void iscsi_tran_dmafree(struct scsi_address *ap, 98 struct scsi_pkt *pkt); 99 static void iscsi_tran_sync_pkt(struct scsi_address *ap, 100 struct scsi_pkt *pkt); 101 static void iscsi_tran_sync_pkt(struct scsi_address *ap, 102 struct scsi_pkt *pkt); 103 static int iscsi_tran_reset_notify(struct scsi_address *ap, int flag, 104 void (*callback) (caddr_t), caddr_t arg); 105 static int iscsi_tran_bus_config(dev_info_t *parent, uint_t flags, 106 ddi_bus_config_op_t op, void *arg, dev_info_t **childp); 107 static int iscsi_tran_bus_unconfig(dev_info_t *parent, uint_t flags, 108 ddi_bus_config_op_t op, void *arg); 109 static int iscsi_tran_get_name(struct scsi_device *sd, char *name, int len); 110 static int iscsi_tran_get_bus_addr(struct scsi_device *sd, char *name, int len); 111 112 /* bus_ops prototypes */ 113 /* LINTED E_STATIC_UNUSED */ 114 static ddi_intrspec_t iscsi_get_intrspec(dev_info_t *dip, dev_info_t *rdip, 115 uint_t inumber); 116 /* LINTED E_STATIC_UNUSED */ 117 static int iscsi_add_intrspec(dev_info_t *dip, dev_info_t *rdip, 118 ddi_intrspec_t intrspec, ddi_iblock_cookie_t *iblock_cookiep, 119 ddi_idevice_cookie_t *idevice_cookiep, uint_t (*int_handler)(caddr_t 120 int_handler_arg), caddr_t int_handler_arg, int kind); 121 /* LINTED E_STATIC_UNUSED */ 122 static void iscsi_remove_intrspec(dev_info_t *dip, dev_info_t *rdip, 123 ddi_intrspec_t intrspec, ddi_iblock_cookie_t iblock_cookie); 124 /* LINTED E_STATIC_UNUSED */ 125 static int iscsi_ctl(dev_info_t *dip, dev_info_t *rdip, ddi_ctl_enum_t ctlop, 126 void *arg, void *result); 127 128 /* cb_ops prototypes */ 129 static int iscsi_open(dev_t *devp, int flags, int otyp, cred_t *credp); 130 static int iscsi_close(dev_t dev, int flag, int otyp, cred_t *credp); 131 static int iscsi_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, 132 cred_t *credp, int *rvalp); 133 134 int iscsi_get_persisted_param(uchar_t *name, 135 iscsi_param_get_t *ipgp, 136 iscsi_login_params_t *params); 137 static void iscsi_override_target_default(iscsi_hba_t *ihp, 138 iscsi_param_get_t *ipg); 139 140 /* scsi_tran helpers */ 141 static int iscsi_virt_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 142 scsi_hba_tran_t *hba_tran, struct scsi_device *sd); 143 static int iscsi_phys_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 144 scsi_hba_tran_t *hba_tran, struct scsi_device *sd); 145 static int iscsi_i_commoncap(struct scsi_address *ap, char *cap, 146 int val, int lunonly, int doset); 147 static void iscsi_get_name_to_iqn(char *name, int name_max_len); 148 static void iscsi_get_name_from_iqn(char *name, int name_max_len); 149 static boolean_t iscsi_cmp_boot_sess_oid(iscsi_hba_t *ihp, uint32_t oid); 150 151 /* iscsi initiator service helpers */ 152 static boolean_t iscsi_enter_service_zone(iscsi_hba_t *ihp, uint32_t status); 153 static void iscsi_exit_service_zone(iscsi_hba_t *ihp, uint32_t status); 154 static void iscsi_check_miniroot(iscsi_hba_t *ihp); 155 156 /* struct helpers prototypes */ 157 158 /* 159 * At this point this driver doesn't need this structure because nothing 160 * is done during the open, close or ioctl. Code put in place because 161 * some admin related work might be done in the ioctl routine. 162 */ 163 static struct cb_ops iscsi_cb_ops = { 164 iscsi_open, /* open */ 165 iscsi_close, /* close */ 166 nodev, /* strategy */ 167 nodev, /* print */ 168 nodev, /* dump */ 169 nodev, /* read */ 170 nodev, /* write */ 171 iscsi_ioctl, /* ioctl */ 172 nodev, /* devmap */ 173 nodev, /* mmap */ 174 nodev, /* segmap */ 175 nochpoll, /* poll */ 176 ddi_prop_op, /* prop_op */ 177 NULL, /* streamtab */ 178 D_NEW | D_MP | D_HOTPLUG, /* flags */ 179 CB_REV, /* cb_rev */ 180 nodev, /* aread */ 181 nodev, /* awrite */ 182 }; 183 184 static struct dev_ops iscsi_dev_ops = { 185 DEVO_REV, /* devo_rev */ 186 0, /* refcnt */ 187 iscsi_getinfo, /* getinfo */ 188 nulldev, /* identify */ 189 nulldev, /* probe */ 190 iscsi_attach, /* attach */ 191 iscsi_detach, /* detach */ 192 nodev, /* reset */ 193 &iscsi_cb_ops, /* driver operations */ 194 NULL, /* bus ops */ 195 NULL, /* power management */ 196 ddi_quiesce_not_needed, /* quiesce */ 197 }; 198 199 static struct modldrv modldrv = { 200 &mod_driverops, /* drv_modops */ 201 ISCSI_NAME_VERSION, /* drv_linkinfo */ 202 &iscsi_dev_ops /* drv_dev_ops */ 203 }; 204 205 static struct modlinkage modlinkage = { 206 MODREV_1, /* ml_rev */ 207 &modldrv, /* ml_linkage[] */ 208 NULL /* NULL termination */ 209 }; 210 211 /* 212 * This structure is bogus. scsi_hba_attach_setup() requires, as in the kernel 213 * will panic if you don't pass this in to the routine, this information. 214 * Need to determine what the actual impact to the system is by providing 215 * this information if any. Since dma allocation is done in pkt_init it may 216 * not have any impact. These values are straight from the Writing Device 217 * Driver manual. 218 */ 219 static ddi_dma_attr_t iscsi_dma_attr = { 220 DMA_ATTR_V0, /* ddi_dma_attr version */ 221 0, /* low address */ 222 0xffffffff, /* high address */ 223 0x00ffffff, /* counter upper bound */ 224 1, /* alignment requirements */ 225 0x3f, /* burst sizes */ 226 1, /* minimum DMA access */ 227 0xffffffff, /* maximum DMA access */ 228 (1 << 24) - 1, /* segment boundary restrictions */ 229 1, /* scater/gather list length */ 230 512, /* device granularity */ 231 0 /* DMA flags */ 232 }; 233 234 /* 235 * _init - General driver init entry 236 */ 237 int 238 _init(void) 239 { 240 int rval = 0; 241 242 iscsi_net_init(); 243 244 mutex_init(&iscsi_oid_mutex, NULL, MUTEX_DRIVER, NULL); 245 iscsi_oid = ISCSI_INITIATOR_OID; 246 247 /* 248 * Set up the soft state structures. If this driver is actually 249 * being attached to the system then we'll have at least one 250 * HBA/NIC used. 251 */ 252 rval = ddi_soft_state_init(&iscsi_state, 253 sizeof (iscsi_hba_t), 1); 254 if (rval != 0) { 255 iscsi_net_fini(); 256 goto init_done; 257 } 258 259 rval = scsi_hba_init(&modlinkage); 260 if (rval != 0) { 261 ddi_soft_state_fini(&iscsi_state); 262 iscsi_net_fini(); 263 goto init_done; 264 } 265 266 rval = mod_install(&modlinkage); 267 if (rval != 0) { 268 ddi_soft_state_fini(&iscsi_state); 269 scsi_hba_fini(&modlinkage); 270 iscsi_net_fini(); 271 goto init_done; 272 } 273 (void) iscsi_door_ini(); 274 275 init_done: 276 return (rval); 277 } 278 279 /* 280 * _fini - General driver destructor entry 281 */ 282 int 283 _fini(void) 284 { 285 int rval = 0; 286 287 rval = mod_remove(&modlinkage); 288 if (rval == 0) { 289 scsi_hba_fini(&modlinkage); 290 ddi_soft_state_fini(&iscsi_state); 291 mutex_destroy(&iscsi_oid_mutex); 292 (void) iscsi_door_term(); 293 iscsi_net_fini(); 294 } 295 return (rval); 296 } 297 298 /* 299 * _info - General driver info entry 300 */ 301 int 302 _info(struct modinfo *mp) 303 { 304 int rval = 0; 305 306 rval = mod_info(&modlinkage, mp); 307 308 return (rval); 309 } 310 311 312 /* 313 * +--------------------------------------------------------------------+ 314 * | Start of dev_ops routines | 315 * +--------------------------------------------------------------------+ 316 */ 317 318 /* 319 * iscsi_getinfo - returns general driver information 320 */ 321 /* ARGSUSED */ 322 static int 323 iscsi_getinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, 324 void *arg, void **result) 325 { 326 int rval = DDI_SUCCESS; 327 int instance = getminor((dev_t)arg); 328 iscsi_hba_t *ip; 329 330 switch (infocmd) { 331 case DDI_INFO_DEVT2DEVINFO: 332 if ((ip = ddi_get_soft_state(iscsi_state, instance)) == NULL) { 333 return (DDI_FAILURE); 334 } 335 *result = ip->hba_dip; 336 if (ip->hba_dip == NULL) 337 rval = DDI_FAILURE; 338 else 339 rval = DDI_SUCCESS; 340 break; 341 342 case DDI_INFO_DEVT2INSTANCE: 343 *result = (void *)(uintptr_t)instance; 344 rval = DDI_SUCCESS; 345 break; 346 347 default: 348 rval = DDI_FAILURE; 349 break; 350 } 351 return (rval); 352 } 353 354 355 /* 356 * iscsi_attach -- Attach instance of an iSCSI HBA. We 357 * will attempt to create our HBA and register it with 358 * scsi_vhci. If it's not possible to create the HBA 359 * or register with vhci we will fail the attach. 360 */ 361 static int 362 iscsi_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) 363 { 364 int rval = DDI_SUCCESS; 365 int instance = ddi_get_instance(dip); 366 iscsi_hba_t *ihp = NULL; 367 scsi_hba_tran_t *tran = NULL; 368 char init_port_name[MAX_NAME_PROP_SIZE]; 369 370 switch (cmd) { 371 case DDI_ATTACH: 372 /* create iSCSH HBA devctl device node */ 373 if (ddi_create_minor_node(dip, ISCSI_DEVCTL, S_IFCHR, 0, 374 DDI_PSEUDO, 0) == DDI_SUCCESS) { 375 376 /* allocate HBA soft state */ 377 if (ddi_soft_state_zalloc(iscsi_state, instance) != 378 DDI_SUCCESS) { 379 ddi_remove_minor_node(dip, NULL); 380 rval = DDI_FAILURE; 381 break; 382 } 383 384 /* get reference to soft state */ 385 if ((ihp = (iscsi_hba_t *)ddi_get_soft_state( 386 iscsi_state, instance)) == NULL) { 387 ddi_remove_minor_node(dip, NULL); 388 ddi_soft_state_free(iscsi_state, instance); 389 rval = DDI_FAILURE; 390 break; 391 } 392 393 /* init HBA mutex used to protect discovery events */ 394 mutex_init(&ihp->hba_discovery_events_mutex, NULL, 395 MUTEX_DRIVER, NULL); 396 397 /* Get LDI ident */ 398 rval = ldi_ident_from_dip(dip, &ihp->hba_li); 399 ASSERT(rval == 0); /* Failure indicates invalid arg */ 400 401 /* init HBA mutex used to protect service status */ 402 mutex_init(&ihp->hba_service_lock, NULL, 403 MUTEX_DRIVER, NULL); 404 cv_init(&ihp->hba_service_cv, NULL, CV_DRIVER, NULL); 405 406 /* 407 * init SendTargets semaphore that is used to allow 408 * only one operation at a time 409 */ 410 sema_init(&ihp->hba_sendtgts_semaphore, 1, NULL, 411 SEMA_DRIVER, NULL); 412 413 ihp->hba_sess_list = NULL; 414 rw_init(&ihp->hba_sess_list_rwlock, NULL, 415 RW_DRIVER, NULL); 416 417 /* allocate scsi_hba_tran */ 418 if ((tran = scsi_hba_tran_alloc(dip, SCSI_HBA_CANSLEEP)) 419 == NULL) { 420 ddi_remove_minor_node(dip, NULL); 421 goto iscsi_attach_failed2; 422 } 423 424 /* soft state setup */ 425 ihp->hba_sig = ISCSI_SIG_HBA; 426 ihp->hba_tran = tran; 427 ihp->hba_dip = dip; 428 if (iscsiboot_prop == NULL) { 429 ihp->hba_service_status = 430 ISCSI_SERVICE_DISABLED; 431 } else { 432 ihp->hba_service_status = 433 ISCSI_SERVICE_ENABLED; 434 } 435 ihp->hba_service_client_count = 0; 436 437 mutex_enter(&iscsi_oid_mutex); 438 ihp->hba_oid = iscsi_oid++; 439 mutex_exit(&iscsi_oid_mutex); 440 441 ihp->hba_name[0] = '\0'; 442 ihp->hba_name_length = 0; 443 ihp->hba_alias_length = 0; 444 ihp->hba_alias[0] = '\0'; 445 446 iscsi_net->tweaks.rcvbuf = ddi_prop_get_int( 447 DDI_DEV_T_ANY, ihp->hba_dip, 0, "so-rcvbuf", 448 ISCSI_SOCKET_RCVBUF_SIZE); 449 450 iscsi_net->tweaks.sndbuf = ddi_prop_get_int( 451 DDI_DEV_T_ANY, ihp->hba_dip, 0, "so-sndbuf", 452 ISCSI_SOCKET_SNDBUF_SIZE); 453 454 iscsi_net->tweaks.nodelay = ddi_prop_get_int( 455 DDI_DEV_T_ANY, ihp->hba_dip, 0, "tcp-nodelay", 456 ISCSI_TCP_NODELAY_DEFAULT); 457 458 iscsi_net->tweaks.conn_notify_threshold = 459 ddi_prop_get_int(DDI_DEV_T_ANY, 460 ihp->hba_dip, 0, "tcp-conn-notify-threshold", 461 ISCSI_TCP_CNOTIFY_THRESHOLD_DEFAULT); 462 463 iscsi_net->tweaks.conn_abort_threshold = 464 ddi_prop_get_int(DDI_DEV_T_ANY, ihp->hba_dip, 465 0, "tcp-conn-abort-threshold", 466 ISCSI_TCP_CABORT_THRESHOLD_DEFAULT); 467 468 iscsi_net->tweaks.abort_threshold = ddi_prop_get_int( 469 DDI_DEV_T_ANY, ihp->hba_dip, 0, 470 "tcp-abort-threshold", 471 ISCSI_TCP_ABORT_THRESHOLD_DEFAULT); 472 473 ihp->hba_config_storm_delay = ddi_prop_get_int( 474 DDI_DEV_T_ANY, ihp->hba_dip, 0, 475 "config-storm-delay", 476 ISCSI_CONFIG_STORM_DELAY_DEFAULT); 477 478 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 479 "so-rcvbuf", iscsi_net->tweaks.rcvbuf); 480 481 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 482 "so-sndbuf", iscsi_net->tweaks.sndbuf); 483 484 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 485 "tcp-nodelay", iscsi_net->tweaks.nodelay); 486 487 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 488 "tcp-conn-notify-threshold", 489 iscsi_net->tweaks.conn_notify_threshold); 490 491 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 492 "tcp-conn-abort-threshold", 493 iscsi_net->tweaks.conn_abort_threshold); 494 495 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 496 "tcp-abort-threshold", 497 iscsi_net->tweaks.abort_threshold); 498 499 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip, 500 "config-storm-delay", 501 ihp->hba_config_storm_delay); 502 503 /* setup hba defaults */ 504 iscsi_set_default_login_params(&ihp->hba_params); 505 506 /* setup minimal initiator params */ 507 iscsid_set_default_initiator_node_settings(ihp, B_TRUE); 508 509 /* hba set up */ 510 tran->tran_hba_private = ihp; 511 tran->tran_tgt_private = NULL; 512 tran->tran_tgt_init = iscsi_tran_lun_init; 513 tran->tran_tgt_probe = iscsi_tran_lun_probe; 514 tran->tran_tgt_free = iscsi_tran_lun_free; 515 tran->tran_start = iscsi_tran_start; 516 tran->tran_abort = iscsi_tran_abort; 517 tran->tran_reset = iscsi_tran_reset; 518 tran->tran_getcap = iscsi_tran_getcap; 519 tran->tran_setcap = iscsi_tran_setcap; 520 tran->tran_init_pkt = iscsi_tran_init_pkt; 521 tran->tran_destroy_pkt = iscsi_tran_destroy_pkt; 522 tran->tran_dmafree = iscsi_tran_dmafree; 523 tran->tran_sync_pkt = iscsi_tran_sync_pkt; 524 tran->tran_reset_notify = iscsi_tran_reset_notify; 525 tran->tran_bus_config = iscsi_tran_bus_config; 526 tran->tran_bus_unconfig = iscsi_tran_bus_unconfig; 527 528 tran->tran_get_name = iscsi_tran_get_name; 529 tran->tran_get_bus_addr = iscsi_tran_get_bus_addr; 530 tran->tran_interconnect_type = INTERCONNECT_ISCSI; 531 532 /* register scsi hba with scsa */ 533 if (scsi_hba_attach_setup(dip, &iscsi_dma_attr, 534 tran, SCSI_HBA_TRAN_CLONE) != DDI_SUCCESS) { 535 goto iscsi_attach_failed1; 536 } 537 538 /* register scsi hba with mdi (MPxIO/vhci) */ 539 if (mdi_phci_register(MDI_HCI_CLASS_SCSI, dip, 0) != 540 MDI_SUCCESS) { 541 ihp->hba_mpxio_enabled = B_FALSE; 542 } else { 543 ihp->hba_mpxio_enabled = B_TRUE; 544 } 545 546 (void) iscsi_hba_kstat_init(ihp); 547 548 /* Initialize targetparam list */ 549 iscsi_targetparam_init(); 550 551 /* Initialize ISID */ 552 ihp->hba_isid[0] = ISCSI_SUN_ISID_0; 553 ihp->hba_isid[1] = ISCSI_SUN_ISID_1; 554 ihp->hba_isid[2] = ISCSI_SUN_ISID_2; 555 ihp->hba_isid[3] = ISCSI_SUN_ISID_3; 556 ihp->hba_isid[4] = ISCSI_SUN_ISID_4; 557 ihp->hba_isid[5] = ISCSI_SUN_ISID_5; 558 559 /* Setup iSNS transport services and client */ 560 isns_client_init(); 561 562 /* 563 * initialize persistent store, 564 * or boot target info in case of iscsi boot 565 */ 566 ihp->hba_persistent_loaded = B_FALSE; 567 if (iscsid_init(ihp) == B_FALSE) { 568 goto iscsi_attach_failed0; 569 } 570 571 /* Setup init_port_name for MPAPI */ 572 (void) snprintf(init_port_name, MAX_NAME_PROP_SIZE, 573 "%s,%02x%02x%02x%02x%02x%02x", 574 (char *)ihp->hba_name, ihp->hba_isid[0], 575 ihp->hba_isid[1], ihp->hba_isid[2], 576 ihp->hba_isid[3], ihp->hba_isid[4], 577 ihp->hba_isid[5]); 578 579 if (ddi_prop_update_string(DDI_DEV_T_NONE, dip, 580 "initiator-port", init_port_name) != 581 DDI_PROP_SUCCESS) { 582 cmn_err(CE_WARN, "iscsi_attach: Creating " 583 "initiator-port property on iSCSI " 584 "HBA(%s) with dip(%d) Failed", 585 (char *)ihp->hba_name, 586 ddi_get_instance(dip)); 587 } 588 589 ddi_report_dev(dip); 590 } else { 591 rval = DDI_FAILURE; 592 } 593 break; 594 595 iscsi_attach_failed0: 596 isns_client_cleanup(); 597 if (ihp->stats.ks) { 598 (void) iscsi_hba_kstat_term(ihp); 599 } 600 if (ihp->hba_mpxio_enabled == B_TRUE) { 601 (void) mdi_phci_unregister(dip, 0); 602 } 603 (void) scsi_hba_detach(ihp->hba_dip); 604 iscsi_attach_failed1: 605 ddi_remove_minor_node(dip, NULL); 606 ddi_prop_remove_all(ihp->hba_dip); 607 scsi_hba_tran_free(tran); 608 iscsi_attach_failed2: 609 cv_destroy(&ihp->hba_service_cv); 610 mutex_destroy(&ihp->hba_service_lock); 611 mutex_destroy(&ihp->hba_discovery_events_mutex); 612 sema_destroy(&ihp->hba_sendtgts_semaphore); 613 rw_destroy(&ihp->hba_sess_list_rwlock); 614 ddi_soft_state_free(iscsi_state, instance); 615 rval = DDI_FAILURE; 616 break; 617 618 case DDI_RESUME: 619 break; 620 621 default: 622 rval = DDI_FAILURE; 623 } 624 625 if (rval != DDI_SUCCESS) { 626 cmn_err(CE_WARN, "iscsi driver unable to attach " 627 "hba instance %d", instance); 628 } 629 630 return (rval); 631 } 632 633 /* 634 * iscsi_detach - called on unload of hba instance 635 */ 636 static int 637 iscsi_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) 638 { 639 int rval = DDI_SUCCESS; 640 scsi_hba_tran_t *tran = NULL; 641 iscsi_hba_t *ihp = NULL; 642 iscsi_hba_t *ihp_check = NULL; 643 int instance; 644 char *init_node_name; 645 646 instance = ddi_get_instance(dip); 647 648 switch (cmd) { 649 case DDI_DETACH: 650 if (!(tran = (scsi_hba_tran_t *)ddi_get_driver_private(dip))) { 651 rval = DDI_SUCCESS; 652 break; 653 } 654 655 if ((ihp = (iscsi_hba_t *)tran->tran_hba_private) == NULL) { 656 rval = DDI_FAILURE; 657 break; 658 } 659 660 /* 661 * Validate that what is stored by the DDI framework is still 662 * the same state structure referenced by the SCSI framework 663 */ 664 ihp_check = ddi_get_soft_state(iscsi_state, instance); 665 if (ihp_check != ihp) { 666 rval = DDI_FAILURE; 667 break; 668 } 669 670 /* If a session exists we can't safely detach */ 671 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 672 if (ihp->hba_sess_list != NULL) { 673 rw_exit(&ihp->hba_sess_list_rwlock); 674 rval = DDI_FAILURE; 675 break; 676 } 677 rw_exit(&ihp->hba_sess_list_rwlock); 678 679 /* Disable all discovery services */ 680 if (iscsid_disable_discovery(ihp, 681 ISCSI_ALL_DISCOVERY_METHODS) == B_FALSE) { 682 /* Disable failed. Fail detach */ 683 rval = DDI_FAILURE; 684 break; 685 } 686 687 /* Deregister from iSNS server(s). */ 688 init_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 689 if (persistent_initiator_name_get(init_node_name, 690 ISCSI_MAX_NAME_LEN) == B_TRUE) { 691 if (strlen(init_node_name) > 0) { 692 (void) isns_dereg(ihp->hba_isid, 693 (uint8_t *)init_node_name); 694 } 695 } 696 kmem_free(init_node_name, ISCSI_MAX_NAME_LEN); 697 init_node_name = NULL; 698 699 /* Cleanup iSNS Client */ 700 isns_client_cleanup(); 701 702 iscsi_targetparam_cleanup(); 703 704 /* Cleanup iscsid resources */ 705 iscsid_fini(); 706 707 if (rval != DDI_SUCCESS) { 708 break; 709 } 710 /* kstat hba. destroy */ 711 KSTAT_DEC_HBA_CNTR_SESS(ihp); 712 713 if (ihp->hba_mpxio_enabled == B_TRUE) { 714 (void) mdi_phci_unregister(dip, 0); 715 } 716 ddi_remove_minor_node(dip, NULL); 717 718 ddi_prop_remove_all(ihp->hba_dip); 719 720 ldi_ident_release(ihp->hba_li); 721 722 cv_destroy(&ihp->hba_service_cv); 723 mutex_destroy(&ihp->hba_service_lock); 724 mutex_destroy(&ihp->hba_discovery_events_mutex); 725 rw_destroy(&ihp->hba_sess_list_rwlock); 726 (void) iscsi_hba_kstat_term(ihp); 727 728 (void) scsi_hba_detach(dip); 729 if (tran != NULL) { 730 scsi_hba_tran_free(tran); 731 } 732 ddi_soft_state_free(iscsi_state, instance); 733 break; 734 default: 735 break; 736 } 737 738 if (rval != DDI_SUCCESS) { 739 cmn_err(CE_WARN, "iscsi driver unable to " 740 "detach hba instance %d", instance); 741 } 742 743 return (rval); 744 } 745 746 /* 747 * +--------------------------------------------------------------------+ 748 * | End of dev_ops routines | 749 * +--------------------------------------------------------------------+ 750 */ 751 752 /* 753 * +--------------------------------------------------------------------+ 754 * | scsi_tran(9E) routines | 755 * +--------------------------------------------------------------------+ 756 */ 757 758 /* 759 * iscsi_tran_lun_init - Find target device based on SCSI device 760 * Based on the information given (SCSI device, target dev_info) find 761 * the target iSCSI device and put a pointer to that information in 762 * the scsi_hba_tran_t structure. 763 */ 764 static int 765 iscsi_tran_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 766 scsi_hba_tran_t *hba_tran, struct scsi_device *sd) 767 { 768 int rval = 0; 769 int type = 0; 770 771 ASSERT(hba_tran->tran_hba_private != NULL); 772 773 /* 774 * Child node is getting initialized. Look at the mpxio component 775 * type on the child device to see if this device is mpxio managed 776 * or not. 777 */ 778 type = mdi_get_component_type(lun_dip); 779 if (type != MDI_COMPONENT_CLIENT) { 780 rval = iscsi_phys_lun_init(hba_dip, lun_dip, hba_tran, sd); 781 } else { 782 rval = iscsi_virt_lun_init(hba_dip, lun_dip, hba_tran, sd); 783 } 784 785 return (rval); 786 } 787 788 /* 789 * iscsi_tran_lun_probe - This function didn't need to be implemented. 790 * We could have left NULL in the tran table. Since this isn't a 791 * performance path this seems safe. We are just wrappering the 792 * function so we can see the call go through if we have debugging 793 * enabled. 794 */ 795 static int 796 iscsi_tran_lun_probe(struct scsi_device *sd, int (*callback) ()) 797 { 798 int rval = 0; 799 800 rval = scsi_hba_probe(sd, callback); 801 802 return (rval); 803 } 804 805 /* 806 * iscsi_init_pkt - Allocate SCSI packet and fill in required info. 807 */ 808 /* ARGSUSED */ 809 static struct scsi_pkt * 810 iscsi_tran_init_pkt(struct scsi_address *ap, struct scsi_pkt *pkt, 811 struct buf *bp, int cmdlen, int statuslen, int tgtlen, int flags, 812 int (*callback) (), caddr_t arg) 813 { 814 iscsi_lun_t *ilp; 815 iscsi_cmd_t *icmdp; 816 817 ASSERT(ap != NULL); 818 ASSERT(callback == NULL_FUNC || callback == SLEEP_FUNC); 819 820 /* 821 * The software stack doesn't have DMA which means the iSCSI 822 * protocol layer will be doing a bcopy from bp to outgoing 823 * streams buffers. Make sure that the buffer is mapped in 824 * so that the copy won't panic the system. 825 */ 826 if (bp && (bp->b_bcount != 0) && 827 bp_mapin_common(bp, (callback == NULL_FUNC) ? 828 VM_NOSLEEP : VM_SLEEP) == NULL) { 829 return (NULL); 830 } 831 832 ilp = (iscsi_lun_t *)ap->a_hba_tran->tran_tgt_private; 833 ASSERT(ilp != NULL); 834 835 if (pkt == NULL) { 836 pkt = scsi_hba_pkt_alloc(ilp->lun_sess->sess_hba->hba_dip, 837 ap, cmdlen, statuslen, tgtlen, sizeof (iscsi_cmd_t), 838 callback, arg); 839 if (pkt == NULL) { 840 return (NULL); 841 } 842 icmdp = (iscsi_cmd_t *)pkt->pkt_ha_private; 843 icmdp->cmd_sig = ISCSI_SIG_CMD; 844 icmdp->cmd_state = ISCSI_CMD_STATE_FREE; 845 icmdp->cmd_lun = ilp; 846 icmdp->cmd_type = ISCSI_CMD_TYPE_SCSI; 847 /* add the report lun addressing type on to the lun */ 848 icmdp->cmd_un.scsi.lun = ilp->lun_addr_type << 14; 849 icmdp->cmd_un.scsi.lun = icmdp->cmd_un.scsi.lun | 850 ilp->lun_num; 851 icmdp->cmd_un.scsi.pkt = pkt; 852 icmdp->cmd_un.scsi.bp = bp; 853 icmdp->cmd_un.scsi.cmdlen = cmdlen; 854 icmdp->cmd_un.scsi.statuslen = statuslen; 855 icmdp->cmd_crc_error_seen = B_FALSE; 856 icmdp->cmd_misc_flags = 0; 857 if (flags & PKT_XARQ) { 858 icmdp->cmd_misc_flags |= ISCSI_CMD_MISCFLAG_XARQ; 859 } 860 861 862 idm_sm_audit_init(&icmdp->cmd_state_audit); 863 864 mutex_init(&icmdp->cmd_mutex, NULL, MUTEX_DRIVER, NULL); 865 cv_init(&icmdp->cmd_completion, NULL, CV_DRIVER, NULL); 866 867 pkt->pkt_address = *ap; 868 pkt->pkt_comp = (void (*)())NULL; 869 pkt->pkt_flags = 0; 870 pkt->pkt_time = 0; 871 pkt->pkt_resid = 0; 872 pkt->pkt_statistics = 0; 873 pkt->pkt_reason = 0; 874 } 875 return (pkt); 876 } 877 878 /* 879 * iscsi_tran_lun_free - Free a SCSI LUN 880 */ 881 static void 882 iscsi_tran_lun_free(dev_info_t *hba_dip, dev_info_t *lun_dip, 883 scsi_hba_tran_t *hba_tran, struct scsi_device *sd) 884 { 885 iscsi_lun_t *ilp = NULL; 886 887 ASSERT(hba_dip != NULL); 888 ASSERT(lun_dip != NULL); 889 ASSERT(hba_tran != NULL); 890 ASSERT(sd != NULL); 891 ilp = (iscsi_lun_t *)hba_tran->tran_tgt_private; 892 ASSERT(ilp != NULL); 893 894 (void) mdi_prop_remove(ilp->lun_pip, NULL); 895 } 896 897 /* 898 * iscsi_start -- Start a SCSI transaction based on the packet 899 * This will attempt to add the icmdp to the pending queue 900 * for the connection and kick the queue. If the enqueue 901 * fails that means the queue is full. 902 */ 903 static int 904 iscsi_tran_start(struct scsi_address *ap, struct scsi_pkt *pkt) 905 { 906 iscsi_lun_t *ilp = NULL; 907 iscsi_sess_t *isp = NULL; 908 iscsi_cmd_t *icmdp = NULL; 909 uint_t flags; 910 911 ASSERT(ap != NULL); 912 ASSERT(pkt != NULL); 913 ilp = (iscsi_lun_t *)ap->a_hba_tran->tran_tgt_private; 914 isp = (iscsi_sess_t *)ilp->lun_sess; 915 icmdp = (iscsi_cmd_t *)pkt->pkt_ha_private; 916 flags = pkt->pkt_flags; 917 ASSERT(ilp != NULL); 918 ASSERT(isp != NULL); 919 ASSERT(icmdp != NULL); 920 921 /* 922 * If the session is in the FREE state then 923 * all connections are down and retries have 924 * been exhausted. Fail command with fatal error. 925 */ 926 mutex_enter(&isp->sess_state_mutex); 927 if (isp->sess_state == ISCSI_SESS_STATE_FREE) { 928 mutex_exit(&isp->sess_state_mutex); 929 return (TRAN_FATAL_ERROR); 930 } 931 932 /* 933 * If the session is not in LOGGED_IN then we have 934 * no connections LOGGED_IN, but we haven't exhuasted 935 * our retries. Fail the command with busy so the 936 * caller might try again later. Once retries are 937 * exhausted the state machine will move us to FREE. 938 */ 939 if (isp->sess_state != ISCSI_SESS_STATE_LOGGED_IN) { 940 mutex_exit(&isp->sess_state_mutex); 941 return (TRAN_BUSY); 942 } 943 944 /* 945 * If we haven't received data from the target in the 946 * max specified period something is wrong with the 947 * transport. Fail IO with FATAL_ERROR. 948 */ 949 if (isp->sess_rx_lbolt + SEC_TO_TICK(iscsi_rx_max_window) < 950 ddi_get_lbolt()) { 951 mutex_exit(&isp->sess_state_mutex); 952 return (TRAN_FATAL_ERROR); 953 } 954 955 /* 956 * If we haven't received data from the target in the 957 * specified period something is probably wrong with 958 * the transport. Just return back BUSY until either 959 * the problem is resolved of the transport fails. 960 */ 961 if (isp->sess_rx_lbolt + SEC_TO_TICK(iscsi_rx_window) < 962 ddi_get_lbolt()) { 963 mutex_exit(&isp->sess_state_mutex); 964 return (TRAN_BUSY); 965 } 966 967 968 /* reset cmd values in case upper level driver is retrying cmd */ 969 icmdp->cmd_prev = icmdp->cmd_next = NULL; 970 icmdp->cmd_crc_error_seen = B_FALSE; 971 icmdp->cmd_lbolt_pending = icmdp->cmd_lbolt_active = 972 icmdp->cmd_lbolt_aborting = icmdp->cmd_lbolt_timeout = 973 (clock_t)NULL; 974 icmdp->cmd_itt = icmdp->cmd_ttt = 0; 975 icmdp->cmd_un.scsi.abort_icmdp = NULL; 976 977 mutex_enter(&isp->sess_queue_pending.mutex); 978 iscsi_cmd_state_machine(icmdp, ISCSI_CMD_EVENT_E1, isp); 979 mutex_exit(&isp->sess_queue_pending.mutex); 980 mutex_exit(&isp->sess_state_mutex); 981 982 /* 983 * If this packet doesn't have FLAG_NOINTR set, it could have 984 * already run to completion (and the memory freed) at this 985 * point, so check our local copy of pkt_flags. Otherwise we 986 * have to wait for completion before returning to the caller. 987 */ 988 if (flags & FLAG_NOINTR) { 989 mutex_enter(&icmdp->cmd_mutex); 990 while ((icmdp->cmd_state != ISCSI_CMD_STATE_COMPLETED) || 991 (icmdp->cmd_un.scsi.r2t_icmdp != NULL) || 992 (icmdp->cmd_un.scsi.abort_icmdp != NULL) || 993 (icmdp->cmd_un.scsi.r2t_more == B_TRUE)) { 994 cv_wait(&icmdp->cmd_completion, &icmdp->cmd_mutex); 995 } 996 icmdp->cmd_state = ISCSI_CMD_STATE_FREE; 997 mutex_exit(&icmdp->cmd_mutex); 998 } 999 1000 return (TRAN_ACCEPT); 1001 } 1002 1003 /* 1004 * iscsi_tran_abort - Called when an upper level application 1005 * or driver wants to kill a scsi_pkt that was already sent to 1006 * this driver. 1007 */ 1008 /* ARGSUSED */ 1009 static int 1010 iscsi_tran_abort(struct scsi_address *ap, struct scsi_pkt *pkt) 1011 { 1012 return (0); 1013 } 1014 1015 /* 1016 * iscsi_tran_reset - Reset target at either BUS, TARGET, or LUN 1017 * level. This will require the issuing of a task management 1018 * command down to the target/lun. 1019 */ 1020 static int 1021 iscsi_tran_reset(struct scsi_address *ap, int level) 1022 { 1023 int rval = ISCSI_STATUS_INTERNAL_ERROR; 1024 iscsi_sess_t *isp = NULL; 1025 iscsi_lun_t *ilp = NULL; 1026 1027 ilp = (iscsi_lun_t *)ap->a_hba_tran->tran_tgt_private; 1028 ASSERT(ilp != NULL); 1029 isp = ilp->lun_sess; 1030 ASSERT(isp != NULL); 1031 1032 switch (level) { 1033 case RESET_LUN: 1034 /* reset attempt will block until attempt is complete */ 1035 rval = iscsi_handle_reset(isp, level, ilp); 1036 break; 1037 case RESET_BUS: 1038 /* 1039 * What are we going to realy reset the ethernet 1040 * network!? Just fall through to a target reset. 1041 */ 1042 case RESET_TARGET: 1043 /* reset attempt will block until attempt is complete */ 1044 rval = iscsi_handle_reset(isp, level, NULL); 1045 break; 1046 case RESET_ALL: 1047 default: 1048 break; 1049 } 1050 1051 return (ISCSI_SUCCESS(rval) ? 1 : 0); 1052 } 1053 1054 /* 1055 * iscsi_tran_getcap - Get target/lun capabilities. 1056 */ 1057 static int 1058 iscsi_tran_getcap(struct scsi_address *ap, char *cap, int whom) 1059 { 1060 return (iscsi_i_commoncap(ap, cap, 0, whom, 0)); 1061 } 1062 1063 1064 /* 1065 * iscsi_tran_setcap - Set target/lun capabilities. 1066 */ 1067 /* ARGSUSED */ 1068 static int 1069 iscsi_tran_setcap(struct scsi_address *ap, char *cap, int value, int whom) 1070 { 1071 return (iscsi_i_commoncap(ap, cap, value, whom, 1)); 1072 } 1073 1074 1075 /* 1076 * iscsi_tran_destroy_pkt - Clean up packet 1077 */ 1078 static void 1079 iscsi_tran_destroy_pkt(struct scsi_address *ap, struct scsi_pkt *pkt) 1080 { 1081 iscsi_cmd_t *icmdp; 1082 1083 icmdp = (iscsi_cmd_t *)pkt->pkt_ha_private; 1084 1085 ASSERT(icmdp != NULL); 1086 ASSERT(icmdp->cmd_sig == ISCSI_SIG_CMD); 1087 ASSERT(icmdp->cmd_state == ISCSI_CMD_STATE_FREE); 1088 1089 mutex_destroy(&icmdp->cmd_mutex); 1090 cv_destroy(&icmdp->cmd_completion); 1091 scsi_hba_pkt_free(ap, pkt); 1092 } 1093 1094 /* 1095 * iscsi_tran_dmafree - This is a software driver, NO DMA 1096 */ 1097 /* ARGSUSED */ 1098 static void 1099 iscsi_tran_dmafree(struct scsi_address *ap, struct scsi_pkt *pkt) 1100 { 1101 /* 1102 * The iSCSI interface doesn't deal with DMA 1103 */ 1104 } 1105 1106 /* 1107 * iscsi_tran_sync_pkt - This is a software driver, NO DMA 1108 */ 1109 /* ARGSUSED */ 1110 static void 1111 iscsi_tran_sync_pkt(struct scsi_address *ap, struct scsi_pkt *pkt) 1112 { 1113 /* 1114 * The iSCSI interface doesn't deal with DMA 1115 */ 1116 } 1117 1118 /* 1119 * iscsi_tran_reset_notify - We don't support BUS_RESET so there 1120 * is no point in support callback. 1121 */ 1122 /* ARGSUSED */ 1123 static int 1124 iscsi_tran_reset_notify(struct scsi_address *ap, int flag, 1125 void (*callback) (caddr_t), caddr_t arg) 1126 { 1127 1128 /* 1129 * We never do BUS_RESETS so allowing this call 1130 * back to register has no point? 1131 */ 1132 return (DDI_SUCCESS); 1133 } 1134 1135 1136 /* 1137 * iscsi_tran_bus_config - on demand device configuration 1138 * 1139 * iscsi_tran_bus_config is called by the NDI layer at the completion 1140 * of a dev_node creation. There are two primary cases defined in this 1141 * function. The first is BUS_CONFIG_ALL. In this case the NDI is trying 1142 * to identify that targets/luns are available configured at that point 1143 * in time. It is safe to just complete the process succcessfully. The 1144 * second case is a new case that was defined in S10 for devfs. BUS_CONFIG_ONE 1145 * this is to help driver the top down discovery instead of bottom up. If 1146 * we receive a BUS_CONFIG_ONE we should check to see if the <addr> exists 1147 * if so complete successfull processing. Otherwise we should call the 1148 * deamon and see if we can plumb the <addr>. If it is possible to plumb the 1149 * <addr> block until plumbing is complete. In both cases of being able to 1150 * plumb <addr> or not continue with successfull processing. 1151 */ 1152 static int 1153 iscsi_tran_bus_config(dev_info_t *parent, uint_t flags, 1154 ddi_bus_config_op_t op, void *arg, dev_info_t **childp) 1155 { 1156 int rval = NDI_SUCCESS; 1157 iscsi_hba_t *ihp = NULL; 1158 int iflags = flags; 1159 char *name = NULL; 1160 char *ptr = NULL; 1161 boolean_t config_root = B_FALSE; 1162 1163 /* get reference to soft state */ 1164 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state, 1165 ddi_get_instance(parent)); 1166 if (ihp == NULL) { 1167 return (NDI_FAILURE); 1168 } 1169 1170 iscsi_check_miniroot(ihp); 1171 if ((modrootloaded == 0) && (iscsiboot_prop != NULL)) { 1172 config_root = B_TRUE; 1173 } 1174 1175 if (config_root == B_FALSE) { 1176 if (iscsi_client_request_service(ihp) == B_FALSE) { 1177 return (NDI_FAILURE); 1178 } 1179 } 1180 1181 /* lock so only one config operation occrs */ 1182 sema_p(&iscsid_config_semaphore); 1183 1184 switch (op) { 1185 case BUS_CONFIG_ONE: 1186 /* parse target name out of name given */ 1187 if ((ptr = strchr((char *)arg, '@')) == NULL) { 1188 rval = NDI_FAILURE; 1189 break; 1190 } 1191 ptr++; /* move past '@' */ 1192 name = kmem_zalloc(MAX_GET_NAME_SIZE, KM_SLEEP); 1193 (void) strncpy(name, ptr, MAX_GET_NAME_SIZE); 1194 /* We need to strip the LUN */ 1195 if ((ptr = strchr(name, ',')) == NULL) { 1196 rval = NDI_FAILURE; 1197 kmem_free(name, MAX_GET_NAME_SIZE); 1198 name = NULL; 1199 break; 1200 } 1201 /* We also need to strip the 4 bytes of hex TPGT */ 1202 ptr -= 4; 1203 if (ptr <= name) { 1204 rval = NDI_FAILURE; 1205 kmem_free(name, MAX_GET_NAME_SIZE); 1206 name = NULL; 1207 break; 1208 } 1209 *ptr = '\0'; /* NULL terminate */ 1210 1211 /* translate name back to original iSCSI name */ 1212 iscsi_get_name_to_iqn(name, MAX_GET_NAME_SIZE); 1213 1214 /* configure target, skip 4 byte ISID */ 1215 iscsid_config_one(ihp, (name+4), B_TRUE); 1216 1217 kmem_free(name, MAX_GET_NAME_SIZE); 1218 name = NULL; 1219 1220 /* 1221 * DDI group instructed us to use this flag. 1222 */ 1223 iflags |= NDI_MDI_FALLBACK; 1224 break; 1225 case BUS_CONFIG_DRIVER: 1226 /* FALLTHRU */ 1227 case BUS_CONFIG_ALL: 1228 iscsid_config_all(ihp, B_TRUE); 1229 break; 1230 default: 1231 rval = NDI_FAILURE; 1232 break; 1233 } 1234 1235 if (rval == NDI_SUCCESS) { 1236 rval = ndi_busop_bus_config(parent, iflags, 1237 op, arg, childp, 0); 1238 } 1239 sema_v(&iscsid_config_semaphore); 1240 1241 if (config_root == B_FALSE) { 1242 iscsi_client_release_service(ihp); 1243 } 1244 1245 return (rval); 1246 } 1247 1248 /* 1249 * iscsi_tran_bus_unconfig - on demand device unconfiguration 1250 * 1251 * Called by the os framework under low resource situations. 1252 * It will attempt to unload our minor nodes (logical units 1253 * ndi/mdi nodes). 1254 */ 1255 static int 1256 iscsi_tran_bus_unconfig(dev_info_t *parent, uint_t flag, 1257 ddi_bus_config_op_t op, void *arg) 1258 { 1259 int rval = NDI_SUCCESS; 1260 iscsi_hba_t *ihp = NULL; 1261 1262 /* get reference to soft state */ 1263 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state, 1264 ddi_get_instance(parent)); 1265 if (ihp == NULL) { 1266 return (NDI_FAILURE); 1267 } 1268 1269 if (iscsi_client_request_service(ihp) == B_FALSE) { 1270 return (NDI_FAILURE); 1271 } 1272 1273 rval = ndi_busop_bus_unconfig(parent, flag, op, arg); 1274 1275 iscsi_client_release_service(ihp); 1276 1277 return (rval); 1278 } 1279 1280 1281 /* 1282 * iscsi_tran_get_name - create private /devices name for LUN 1283 * 1284 * This creates the <addr> in /devices/iscsi/<driver>@<addr> 1285 * path. For this <addr> we return the <session/target_name>,<lun num> 1286 * Where <target_name> is an <iqn/eui/...> as defined by the iSCSI 1287 * specification. We do modify the name slightly so that it still 1288 * complies with the IEEE <addr> naming scheme. This means that we 1289 * will substitute out the ':', '@', ... and other reserved characters 1290 * defined in the IEEE definition with '%<hex value of special char>' 1291 * This routine is indirectly called by iscsi_lun_create_xxx. These 1292 * calling routines must prevent the session and lun lists from changing 1293 * during this routine. 1294 */ 1295 static int 1296 iscsi_tran_get_name(struct scsi_device *sd, char *name, int len) 1297 { 1298 int target = 0; 1299 int lun = 0; 1300 iscsi_hba_t *ihp = NULL; 1301 iscsi_sess_t *isp = NULL; 1302 iscsi_lun_t *ilp = NULL; 1303 dev_info_t *lun_dip = NULL; 1304 1305 ASSERT(sd != NULL); 1306 ASSERT(name != NULL); 1307 lun_dip = sd->sd_dev; 1308 ASSERT(lun_dip != NULL); 1309 1310 /* get reference to soft state */ 1311 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state, 1312 ddi_get_instance(ddi_get_parent(lun_dip))); 1313 if (ihp == NULL) { 1314 name[0] = '\0'; 1315 return (0); 1316 } 1317 1318 /* Get the target num */ 1319 target = ddi_prop_get_int(DDI_DEV_T_ANY, sd->sd_dev, 1320 DDI_PROP_DONTPASS, TARGET_PROP, 0); 1321 1322 /* Get the target num */ 1323 lun = ddi_prop_get_int(DDI_DEV_T_ANY, sd->sd_dev, 1324 DDI_PROP_DONTPASS, LUN_PROP, 0); 1325 1326 /* 1327 * Now we need to find our ilp by walking the lists 1328 * off the ihp and isp. 1329 */ 1330 /* See if we already created this session */ 1331 1332 /* Walk the HBA's session list */ 1333 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) { 1334 /* compare target name as the unique identifier */ 1335 if (target == isp->sess_oid) { 1336 /* found match */ 1337 break; 1338 } 1339 } 1340 1341 /* If we found matching session continue searching for tgt */ 1342 if (isp == NULL) { 1343 /* sess not found */ 1344 name[0] = '\0'; 1345 return (0); 1346 } 1347 1348 /* 1349 * Search for the matching iscsi lun structure. We don't 1350 * need to hold the READER for the lun list at this point. 1351 * because the tran_get_name is being called from the online 1352 * function which is already holding a reader on the lun 1353 * list. 1354 */ 1355 for (ilp = isp->sess_lun_list; ilp; ilp = ilp->lun_next) { 1356 if (lun == ilp->lun_num) { 1357 /* found match */ 1358 break; 1359 } 1360 } 1361 1362 if (ilp == NULL) { 1363 /* tgt not found */ 1364 name[0] = '\0'; 1365 return (0); 1366 } 1367 1368 /* Ensure enough space for lun_addr is available */ 1369 ASSERT(ilp->lun_addr != NULL); 1370 if ((strlen(ilp->lun_addr) + 1) > len) { 1371 return (0); 1372 } 1373 1374 /* copy lun_addr name */ 1375 (void) strcpy(name, ilp->lun_addr); 1376 1377 /* 1378 * Based on IEEE-1275 we can't have any ':', ' ', '@', or '/' 1379 * characters in our naming. So replace all those characters 1380 * with '-' 1381 */ 1382 iscsi_get_name_from_iqn(name, len); 1383 1384 return (1); 1385 } 1386 1387 /* 1388 * iscsi_tran_get_bus_addr - This returns a human readable string 1389 * for the bus address. Examining most other drivers fcp, etc. They 1390 * all just return the same string as tran_get_name. In our case 1391 * our tran get name is already some what usable so leave alone. 1392 */ 1393 static int 1394 iscsi_tran_get_bus_addr(struct scsi_device *sd, char *name, int len) 1395 { 1396 return (iscsi_tran_get_name(sd, name, len)); 1397 } 1398 1399 1400 /* 1401 * +--------------------------------------------------------------------+ 1402 * | End of scsi_tran routines | 1403 * +--------------------------------------------------------------------+ 1404 */ 1405 1406 /* 1407 * +--------------------------------------------------------------------+ 1408 * | Start of cb_ops routines | 1409 * +--------------------------------------------------------------------+ 1410 */ 1411 1412 /* 1413 * iscsi_open - Driver should be made IOCTL MT safe. Otherwise 1414 * this function needs updated. 1415 */ 1416 /* ARGSUSED */ 1417 static int 1418 iscsi_open(dev_t *devp, int flags, int otyp, cred_t *credp) 1419 { 1420 return (0); 1421 } 1422 1423 /* 1424 * iscsi_close - 1425 */ 1426 /* ARGSUSED */ 1427 static int 1428 iscsi_close(dev_t dev, int flags, int otyp, cred_t *credp) 1429 { 1430 return (0); 1431 } 1432 1433 /* 1434 * iscsi_ioctl - 1435 */ 1436 /* ARGSUSED */ 1437 static int 1438 iscsi_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, 1439 cred_t *credp, int *rvalp) 1440 { 1441 int rtn = 0; 1442 int instance = 0; 1443 int list_space = 0; 1444 int lun_sz = 0; 1445 int did; 1446 int retry; 1447 iscsi_hba_t *ihp = NULL; 1448 iscsi_sess_t *isp = NULL; 1449 iscsi_conn_t *icp = NULL; 1450 iscsi_login_params_t *params = NULL; 1451 iscsi_login_params_t *tmpParams = NULL; 1452 uchar_t *name = NULL; 1453 dev_info_t *lun_dip = NULL; 1454 1455 entry_t e; 1456 iscsi_oid_t oid; 1457 iscsi_property_t *ipp; 1458 iscsi_static_property_t *ispp; 1459 iscsi_param_get_t *ilg; 1460 iscsi_param_set_t *ils; 1461 iscsi_target_list_t idl, *idlp = NULL; 1462 iscsi_addr_list_t ial, *ialp = NULL; 1463 iscsi_chap_props_t *chap = NULL; 1464 iscsi_radius_props_t *radius = NULL; 1465 iscsi_auth_props_t *auth = NULL; 1466 iscsi_lun_list_t *ll, *llp = NULL; 1467 iscsi_lun_props_t *lun = NULL; 1468 iscsi_lun_t *ilp = NULL; 1469 iSCSIDiscoveryMethod_t method; 1470 iSCSIDiscoveryProperties_t discovery_props; 1471 iscsi_uscsi_t iu; 1472 iscsi_uscsi_t iu_caller; 1473 #ifdef _MULTI_DATAMODEL 1474 /* For use when a 32 bit app makes a call into a 64 bit ioctl */ 1475 iscsi_uscsi32_t iu32_caller; 1476 model_t model; 1477 #endif /* _MULTI_DATAMODEL */ 1478 void *void_p; 1479 iscsi_sendtgts_list_t *stl_hdr; 1480 iscsi_sendtgts_list_t *istl; 1481 int stl_sz; 1482 iscsi_target_entry_t *target; 1483 uint32_t old_oid; 1484 uint32_t target_oid; 1485 iscsi_targetparam_entry_t *curr_entry; 1486 char *initiator_node_name; 1487 char *initiator_node_alias; 1488 isns_portal_group_list_t *pg_list = NULL; 1489 isns_server_portal_group_list_t *server_pg_list_hdr = NULL; 1490 isns_server_portal_group_list_t *server_pg_list = NULL; 1491 int pg_list_sz, pg_sz_copy_out, server_pg_list_sz; 1492 iscsi_config_sess_t *ics; 1493 int size; 1494 boolean_t rval; 1495 char init_port_name[MAX_NAME_PROP_SIZE]; 1496 iscsi_sockaddr_t addr_dsc; 1497 iscsi_boot_property_t *bootProp; 1498 boolean_t discovered = B_TRUE; 1499 1500 instance = getminor(dev); 1501 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state, instance); 1502 if (ihp == NULL) 1503 return (EFAULT); 1504 1505 iscsi_check_miniroot(ihp); 1506 if ((cmd != ISCSI_SMF_ONLINE) && (cmd != ISCSI_SMF_OFFLINE) && 1507 (cmd != ISCSI_SMF_GET)) { 1508 /* other cmd needs to acquire the service */ 1509 if (iscsi_client_request_service(ihp) == B_FALSE) { 1510 return (EFAULT); 1511 } 1512 } 1513 1514 switch (cmd) { 1515 /* 1516 * ISCSI_CREATE_OID - Create a Object IDentifier for a TargetName 1517 */ 1518 case ISCSI_CREATE_OID: 1519 if (ddi_copyin((caddr_t)arg, &oid, sizeof (oid), mode)) { 1520 rtn = EFAULT; 1521 break; 1522 } 1523 if (oid.o_vers != ISCSI_INTERFACE_VERSION) { 1524 rtn = EINVAL; 1525 break; 1526 } 1527 1528 /* Set the target that this session is associated with */ 1529 oid.o_oid = iscsi_targetparam_get_oid(oid.o_name); 1530 1531 if (ddi_copyout(&oid, (caddr_t)arg, sizeof (oid), mode)) { 1532 rtn = EFAULT; 1533 break; 1534 } 1535 break; 1536 /* 1537 * ISCSI_PARAM_GET - Get param for specified 1538 * connection/session. 1539 */ 1540 case ISCSI_PARAM_GET: 1541 /* copyin user args */ 1542 ilg = (iscsi_param_get_t *)kmem_alloc(sizeof (*ilg), KM_SLEEP); 1543 if (ddi_copyin((caddr_t)arg, ilg, sizeof (*ilg), mode)) { 1544 rtn = EFAULT; 1545 kmem_free(ilg, sizeof (*ilg)); 1546 break; 1547 } 1548 1549 if (ilg->g_vers != ISCSI_INTERFACE_VERSION) { 1550 rtn = EINVAL; 1551 kmem_free(ilg, sizeof (*ilg)); 1552 break; 1553 } 1554 1555 /* handle special case for Initiator name */ 1556 if (ilg->g_param == ISCSI_LOGIN_PARAM_INITIATOR_NAME) { 1557 (void) strlcpy((char *)ilg->g_value.v_name, 1558 (char *)ihp->hba_name, ISCSI_MAX_NAME_LEN); 1559 } else if (ilg->g_param == ISCSI_LOGIN_PARAM_INITIATOR_ALIAS) { 1560 if (ihp->hba_alias_length == 0) { 1561 rtn = EINVAL; 1562 } else { 1563 (void) strlcpy((char *)ilg->g_value.v_name, 1564 (char *)ihp->hba_alias, ISCSI_MAX_NAME_LEN); 1565 } 1566 } else { 1567 /* To describe the validity of the requested param */ 1568 boolean_t valid_flag = B_TRUE; 1569 1570 name = NULL; 1571 1572 /* 1573 * switch login based if looking for initiator 1574 * params 1575 */ 1576 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 1577 if (ilg->g_oid == ihp->hba_oid) { 1578 /* initiator */ 1579 params = &ihp->hba_params; 1580 name = ihp->hba_name; 1581 if (iscsi_get_persisted_param(name, 1582 ilg, params) != 0) { 1583 valid_flag = B_FALSE; 1584 } 1585 } else { 1586 /* 1587 * If the oid does represent a session check 1588 * to see if it is a target oid. If so, 1589 * return the target's associated session. 1590 */ 1591 rtn = iscsi_sess_get(ilg->g_oid, ihp, &isp); 1592 if (rtn != 0) { 1593 rtn = iscsi_sess_get_by_target( 1594 ilg->g_oid, ihp, &isp); 1595 } 1596 1597 /* 1598 * If rtn is zero then we have found an 1599 * existing session. Use the session name to 1600 * do param lookup. If rtn is non-zero then 1601 * create a targetparam object and use its name 1602 * for param lookup. 1603 */ 1604 if (rtn == 0) { 1605 name = isp->sess_name; 1606 params = &isp->sess_params; 1607 } else { 1608 name = 1609 iscsi_targetparam_get_name( 1610 ilg->g_oid); 1611 if (ilg->g_param_type == 1612 ISCSI_SESS_PARAM) { 1613 tmpParams = 1614 (iscsi_login_params_t *) 1615 kmem_alloc( 1616 sizeof (*tmpParams), 1617 KM_SLEEP); 1618 params = tmpParams; 1619 } 1620 rtn = 0; 1621 } 1622 1623 if (name == NULL) { 1624 rw_exit( 1625 &ihp->hba_sess_list_rwlock); 1626 rtn = EFAULT; 1627 kmem_free(ilg, sizeof (*ilg)); 1628 if (tmpParams != NULL) 1629 kmem_free(tmpParams, 1630 sizeof (*tmpParams)); 1631 1632 break; 1633 } 1634 1635 if (ilg->g_param_type == ISCSI_SESS_PARAM) { 1636 /* session */ 1637 /* 1638 * Update sess_params with the 1639 * latest params from the 1640 * persistent store. 1641 */ 1642 if (iscsi_get_persisted_param(name, 1643 ilg, params) != 0) { 1644 /* 1645 * If the parameter in 1646 * question is not 1647 * overriden, no effect 1648 * on existing session 1649 * parameters. However, 1650 * the parameter is 1651 * marked invalid 1652 * (from the standpoint 1653 * of whether it is 1654 * overriden). 1655 */ 1656 valid_flag = B_FALSE; 1657 } 1658 } else if (ilg->g_param_type == 1659 ISCSI_CONN_PARAM && isp != NULL) { 1660 /* connection */ 1661 rw_enter(&isp->sess_conn_list_rwlock, 1662 RW_READER); 1663 /* Assuming 1 conn per sess. */ 1664 /* 1665 * MC/S - Need to be modified to 1666 * take g_conn_cid into account when 1667 * we go multi-connection. 1668 */ 1669 if ((isp->sess_conn_act != NULL) && 1670 (isp->sess_conn_act->conn_state == 1671 ISCSI_CONN_STATE_LOGGED_IN)) { 1672 params = &(isp-> 1673 sess_conn_act-> 1674 conn_params); 1675 } else { 1676 valid_flag = B_FALSE; 1677 } 1678 rw_exit(&isp->sess_conn_list_rwlock); 1679 } 1680 } 1681 1682 /* make sure we have params to get info from */ 1683 if (params) { 1684 rtn = iscsi_get_param(params, valid_flag, ilg); 1685 1686 /* 1687 * for target parameters, check if any 1688 * parameters were overridden at the initiator 1689 * level. If so, then change the default value 1690 * to the initiator's overridden value 1691 */ 1692 if ((rtn == 0) && 1693 (ilg->g_oid != ihp->hba_oid)) { 1694 iscsi_override_target_default(ihp, 1695 ilg); 1696 } 1697 } 1698 rw_exit(&ihp->hba_sess_list_rwlock); 1699 } 1700 1701 if (rtn == 0) { 1702 rtn = ddi_copyout(ilg, (caddr_t)arg, 1703 sizeof (iscsi_param_get_t), mode); 1704 } 1705 kmem_free(ilg, sizeof (*ilg)); 1706 if (tmpParams != NULL) 1707 kmem_free(tmpParams, sizeof (*tmpParams)); 1708 break; 1709 1710 /* 1711 * ISCSI_INIT_NODE_NAME_SET - Change the initiator-node name for 1712 * the specified connection/session. 1713 */ 1714 case ISCSI_INIT_NODE_NAME_SET: 1715 /* copyin user args */ 1716 ils = (iscsi_param_set_t *)kmem_alloc(sizeof (*ils), KM_SLEEP); 1717 if (ddi_copyin((caddr_t)arg, ils, sizeof (*ils), mode)) { 1718 rtn = EFAULT; 1719 kmem_free(ils, sizeof (*ils)); 1720 break; 1721 } 1722 1723 if (ils->s_vers != ISCSI_INTERFACE_VERSION) { 1724 rtn = EINVAL; 1725 kmem_free(ils, sizeof (*ils)); 1726 break; 1727 } 1728 1729 /* saving off the old initiator-node name */ 1730 initiator_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 1731 rval = persistent_initiator_name_get(initiator_node_name, 1732 ISCSI_MAX_NAME_LEN); 1733 1734 rtn = iscsi_set_params(ils, ihp, B_TRUE); 1735 kmem_free(ils, sizeof (*ils)); 1736 if (rtn != 0) { 1737 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 1738 initiator_node_name = NULL; 1739 break; 1740 } 1741 1742 (void) snprintf(init_port_name, MAX_NAME_PROP_SIZE, 1743 "%s,%02x%02x%02x%02x%02x%02x", 1744 (char *)ihp->hba_name, ihp->hba_isid[0], 1745 ihp->hba_isid[1], ihp->hba_isid[2], 1746 ihp->hba_isid[3], ihp->hba_isid[4], 1747 ihp->hba_isid[5]); 1748 1749 if (ddi_prop_update_string(DDI_DEV_T_NONE, 1750 ihp->hba_dip, "initiator-port", 1751 init_port_name) != DDI_PROP_SUCCESS) { 1752 cmn_err(CE_WARN, "iscsi_ioctl: Updating " 1753 "initiator-port property on iSCSI " 1754 "HBA(%s) with dip(%d) Failed", 1755 (char *)ihp->hba_name, 1756 ddi_get_instance(ihp->hba_dip)); 1757 } 1758 1759 /* 1760 * Deregister the old initiator-node name from the iSNS 1761 * server 1762 * Register the new initiator-node name with the iSNS server 1763 */ 1764 method = persistent_disc_meth_get(); 1765 if (method & iSCSIDiscoveryMethodISNS) { 1766 if (rval == B_TRUE) { 1767 if (strlen(initiator_node_name) > 0) { 1768 /* 1769 * we will attempt to offline the targets. 1770 * if logouts fail, we will still continue 1771 */ 1772 #define STRING_INNO "initiator-node name - Offline " 1773 #define STRING_FFOMD "failed for one or more devices" 1774 if ((iscsid_del( 1775 ihp, NULL, method, NULL)) 1776 != B_TRUE) { 1777 cmn_err(CE_NOTE, 1778 "Attempting to change " 1779 STRING_INNO 1780 STRING_FFOMD); 1781 } 1782 (void) isns_dereg(ihp->hba_isid, 1783 (uint8_t *)initiator_node_name); 1784 #undef STRING_INNO 1785 #undef STRING_FFOMD 1786 } 1787 } 1788 if (persistent_initiator_name_get(initiator_node_name, 1789 ISCSI_MAX_NAME_LEN) != B_TRUE) { 1790 kmem_free(initiator_node_name, 1791 ISCSI_MAX_NAME_LEN); 1792 initiator_node_name = NULL; 1793 rtn = EIO; 1794 break; 1795 } 1796 if (strlen(initiator_node_name) == 0) { 1797 kmem_free(initiator_node_name, 1798 ISCSI_MAX_NAME_LEN); 1799 initiator_node_name = NULL; 1800 rtn = EIO; 1801 break; 1802 } 1803 1804 initiator_node_alias = kmem_zalloc(ISCSI_MAX_NAME_LEN, 1805 KM_SLEEP); 1806 if (persistent_alias_name_get(initiator_node_alias, 1807 ISCSI_MAX_NAME_LEN) != B_TRUE) { 1808 initiator_node_alias[0] = '\0'; 1809 } 1810 1811 (void) isns_reg(ihp->hba_isid, 1812 (uint8_t *)initiator_node_name, 1813 ISCSI_MAX_NAME_LEN, 1814 (uint8_t *)initiator_node_alias, 1815 ISCSI_MAX_NAME_LEN, 1816 ISNS_INITIATOR_NODE_TYPE, 1817 isns_scn_callback); 1818 iscsid_do_isns_query(ihp); 1819 1820 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN); 1821 initiator_node_alias = NULL; 1822 } 1823 1824 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 1825 initiator_node_name = NULL; 1826 break; 1827 1828 /* 1829 * ISCSI_PARAM_SET - Set param for specified connection/session. 1830 */ 1831 case ISCSI_PARAM_SET: 1832 /* copyin user args */ 1833 ils = (iscsi_param_set_t *)kmem_alloc(sizeof (*ils), KM_SLEEP); 1834 if (ddi_copyin((caddr_t)arg, ils, sizeof (*ils), mode)) { 1835 rtn = EFAULT; 1836 kmem_free(ils, sizeof (*ils)); 1837 break; 1838 } 1839 1840 if (ils->s_vers != ISCSI_INTERFACE_VERSION) { 1841 rtn = EINVAL; 1842 kmem_free(ils, sizeof (*ils)); 1843 break; 1844 } 1845 rtn = iscsi_set_params(ils, ihp, B_TRUE); 1846 if (iscsiboot_prop) { 1847 if (iscsi_cmp_boot_sess_oid(ihp, ils->s_oid)) { 1848 /* 1849 * found active session for this object 1850 * or this is initiator's object 1851 * with mpxio enabled 1852 */ 1853 if (!iscsi_reconfig_boot_sess(ihp)) { 1854 rtn = EINVAL; 1855 kmem_free(ils, sizeof (*ils)); 1856 break; 1857 } 1858 } 1859 } 1860 kmem_free(ils, sizeof (*ils)); 1861 break; 1862 1863 /* 1864 * ISCSI_TARGET_PARAM_CLEAR 1865 * - remove custom parameter settings for a target. 1866 */ 1867 case ISCSI_TARGET_PARAM_CLEAR: 1868 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 1869 rtn = EFAULT; 1870 break; 1871 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 1872 rtn = EINVAL; 1873 break; 1874 } 1875 1876 if ((e.e_oid != ihp->hba_oid) && 1877 (e.e_oid != ISCSI_OID_NOTSET)) { 1878 uchar_t *t_name; 1879 iscsi_sess_t *t_isp; 1880 1881 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 1882 /* 1883 * If the oid does represent a session check to see 1884 * if it is a target oid. If so, return the target's 1885 * associated session. 1886 */ 1887 rtn = iscsi_sess_get(e.e_oid, ihp, &isp); 1888 if (rtn != 0) { 1889 rtn = iscsi_sess_get_by_target(e.e_oid, ihp, 1890 &isp); 1891 } 1892 1893 /* 1894 * If rtn is zero then we have found an 1895 * existing session. Use the session name to 1896 * do param lookup. If rtn is non-zero then 1897 * create a targetparam object and use its name 1898 * for param lookup. 1899 */ 1900 if (rtn == 0) { 1901 t_name = isp->sess_name; 1902 } else { 1903 t_name = iscsi_targetparam_get_name(e.e_oid); 1904 rtn = 0; 1905 } 1906 1907 if (t_name == NULL) { 1908 rw_exit(&ihp->hba_sess_list_rwlock); 1909 rtn = EFAULT; 1910 break; 1911 } 1912 1913 name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 1914 (void) strncpy((char *)name, (char *)t_name, 1915 ISCSI_MAX_NAME_LEN); 1916 1917 if (persistent_param_clear((char *)name) == B_FALSE) { 1918 kmem_free(name, ISCSI_MAX_NAME_LEN); 1919 rw_exit(&ihp->hba_sess_list_rwlock); 1920 rtn = EIO; 1921 break; 1922 } 1923 1924 ics = kmem_zalloc(sizeof (*ics), KM_SLEEP); 1925 ics->ics_ver = ISCSI_INTERFACE_VERSION; 1926 ics->ics_oid = ISCSI_INITIATOR_OID; 1927 ics->ics_in = 1; 1928 1929 /* 1930 * We may have multiple sessions with different 1931 * tpgt values. So we need to loop through 1932 * the sessions and update all sessions. 1933 */ 1934 for (isp = ihp->hba_sess_list; isp; 1935 isp = t_isp) { 1936 t_isp = isp->sess_next; 1937 1938 if (strncmp((char *)isp->sess_name, 1939 (char *)name, ISCSI_MAX_NAME_LEN) == 0) { 1940 /* 1941 * When removing target-params we need 1942 * slightly different actions depending 1943 * on if the session should still exist. 1944 * Get the initiator-node value for 1945 * MS/T. If there is no initiator 1946 * value then assume the default value 1947 * of 1. If the initiator value is 1948 * less than this ISID then we need to 1949 * destroy the session. Otherwise 1950 * update the session information and 1951 * resync (N7 event). 1952 */ 1953 rtn = iscsi_ioctl_get_config_sess( 1954 ihp, ics); 1955 if (((rtn != 0) && 1956 (isp->sess_isid[5] > 0)) || 1957 ((rtn == 0) && 1958 (ics->ics_out <= 1959 isp->sess_isid[5]))) { 1960 1961 /* 1962 * This session should no 1963 * longer exist. Remove 1964 * session. 1965 */ 1966 if (!ISCSI_SUCCESS( 1967 iscsi_sess_destroy(isp))) { 1968 kmem_free(ics, 1969 sizeof (*ics)); 1970 kmem_free(name, 1971 ISCSI_MAX_NAME_LEN); 1972 rw_exit(&ihp-> 1973 hba_sess_list_rwlock); 1974 rtn = EBUSY; 1975 break; 1976 } 1977 isp = ihp->hba_sess_list; 1978 } else { 1979 /* 1980 * Reset the session 1981 * parameters. 1982 */ 1983 bcopy(&(isp->sess_hba-> 1984 hba_params), 1985 &(isp->sess_params), 1986 sizeof (isp->sess_params)); 1987 if (iscsiboot_prop && 1988 isp->sess_boot) { 1989 /* 1990 * reconfig boot 1991 * session later 1992 */ 1993 continue; 1994 } 1995 /* 1996 * Notify the session that the 1997 * login parameters have 1998 * changed. 1999 */ 2000 mutex_enter(&isp-> 2001 sess_state_mutex); 2002 iscsi_sess_state_machine(isp, 2003 ISCSI_SESS_EVENT_N7); 2004 mutex_exit(&isp-> 2005 sess_state_mutex); 2006 } 2007 } 2008 } 2009 kmem_free(ics, sizeof (*ics)); 2010 kmem_free(name, ISCSI_MAX_NAME_LEN); 2011 rw_exit(&ihp->hba_sess_list_rwlock); 2012 if (iscsiboot_prop) { 2013 if (iscsi_cmp_boot_sess_oid(ihp, e.e_oid)) { 2014 /* 2015 * found active session for this object 2016 * or this is initiator object 2017 * with mpxio enabled 2018 */ 2019 if (!iscsi_reconfig_boot_sess(ihp)) { 2020 rtn = EINVAL; 2021 break; 2022 } 2023 } 2024 } 2025 } 2026 break; 2027 2028 /* 2029 * ISCSI_TARGET_OID_LIST_GET - 2030 */ 2031 case ISCSI_TARGET_OID_LIST_GET: 2032 /* copyin user args */ 2033 if (ddi_copyin((caddr_t)arg, &idl, 2034 sizeof (idl), mode)) { 2035 rtn = EFAULT; 2036 break; 2037 } 2038 2039 if (idl.tl_vers != ISCSI_INTERFACE_VERSION) { 2040 rtn = EINVAL; 2041 break; 2042 } 2043 2044 list_space = sizeof (iscsi_target_list_t); 2045 if (idl.tl_in_cnt != 0) 2046 list_space += (sizeof (uint32_t) * 2047 (idl.tl_in_cnt - 1)); 2048 2049 idlp = kmem_zalloc(list_space, KM_SLEEP); 2050 bcopy(&idl, idlp, sizeof (idl)); 2051 idlp->tl_out_cnt = 0; 2052 2053 /* 2054 * If target list type is ISCSI_TGT_OID_LIST and discovery 2055 * has not been completed or in progress, poke the discovery 2056 * methods so target information is returned 2057 */ 2058 mutex_enter(&ihp->hba_discovery_events_mutex); 2059 method = ihp->hba_discovery_events; 2060 if ((idl.tl_tgt_list_type == ISCSI_TGT_OID_LIST) && 2061 (method != ISCSI_ALL_DISCOVERY_METHODS) && 2062 (ihp->hba_discovery_in_progress == B_FALSE)) { 2063 ihp->hba_discovery_in_progress = B_TRUE; 2064 mutex_exit(&ihp->hba_discovery_events_mutex); 2065 iscsid_poke_discovery(ihp, iSCSIDiscoveryMethodUnknown); 2066 mutex_enter(&ihp->hba_discovery_events_mutex); 2067 ihp->hba_discovery_in_progress = B_FALSE; 2068 } 2069 mutex_exit(&ihp->hba_discovery_events_mutex); 2070 2071 /* 2072 * Return the correct list information based on the type 2073 */ 2074 switch (idl.tl_tgt_list_type) { 2075 /* ISCSI_TGT_PARAM_OID_LIST - iscsiadm list target-params */ 2076 case ISCSI_TGT_PARAM_OID_LIST: 2077 /* get params from persistent store */ 2078 iscsi_targetparam_lock_list(RW_READER); 2079 curr_entry = iscsi_targetparam_get_next_entry(NULL); 2080 while (curr_entry != NULL) { 2081 if (idlp->tl_out_cnt < idlp->tl_in_cnt) { 2082 idlp->tl_oid_list[idlp->tl_out_cnt] = 2083 curr_entry->target_oid; 2084 } 2085 idlp->tl_out_cnt++; 2086 curr_entry = iscsi_targetparam_get_next_entry( 2087 curr_entry); 2088 } 2089 iscsi_targetparam_unlock_list(); 2090 break; 2091 2092 /* ISCSI_STATIC_TGT_OID_LIST - iscsiadm list static-config */ 2093 case ISCSI_STATIC_TGT_OID_LIST: 2094 { 2095 char *target_name = NULL; 2096 void *v = NULL; 2097 2098 /* get static-config from persistent store */ 2099 target_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 2100 persistent_static_addr_lock(); 2101 while (persistent_static_addr_next(&v, 2102 (char *)target_name, &e) == B_TRUE) { 2103 2104 if (idlp->tl_out_cnt < idlp->tl_in_cnt) { 2105 idlp->tl_oid_list[idlp->tl_out_cnt] = 2106 e.e_oid; 2107 } 2108 idlp->tl_out_cnt++; 2109 2110 } 2111 2112 persistent_static_addr_unlock(); 2113 kmem_free(target_name, ISCSI_MAX_NAME_LEN); 2114 break; 2115 } 2116 2117 /* ISCSI_TGT_OID_LIST - iscsiadm list target */ 2118 case ISCSI_TGT_OID_LIST: 2119 2120 /* get sessions from hba's session list */ 2121 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2122 for (isp = ihp->hba_sess_list; isp; 2123 isp = isp->sess_next) { 2124 2125 if (((isp->sess_state != 2126 ISCSI_SESS_STATE_FREE) || 2127 (isp->sess_discovered_by != 2128 iSCSIDiscoveryMethodUnknown)) && 2129 (isp->sess_type == 2130 ISCSI_SESS_TYPE_NORMAL)) { 2131 if (idlp->tl_out_cnt < 2132 idlp->tl_in_cnt) { 2133 idlp->tl_oid_list[ 2134 idlp->tl_out_cnt] = 2135 isp->sess_oid; 2136 } 2137 idlp->tl_out_cnt++; 2138 } 2139 2140 } 2141 rw_exit(&ihp->hba_sess_list_rwlock); 2142 break; 2143 2144 default: 2145 ASSERT(FALSE); 2146 } 2147 2148 rtn = ddi_copyout(idlp, (caddr_t)arg, list_space, mode); 2149 kmem_free(idlp, list_space); 2150 break; 2151 2152 /* 2153 * ISCSI_TARGET_PROPS_GET - 2154 */ 2155 case ISCSI_TARGET_PROPS_GET: 2156 /* ---- fall through sense the code is almost the same ---- */ 2157 2158 /* 2159 * ISCSI_TARGET_PROPS_SET - 2160 */ 2161 case ISCSI_TARGET_PROPS_SET: 2162 /* copyin user args */ 2163 ipp = (iscsi_property_t *)kmem_alloc(sizeof (*ipp), 2164 KM_SLEEP); 2165 if (ddi_copyin((caddr_t)arg, ipp, sizeof (*ipp), mode)) { 2166 rtn = EFAULT; 2167 kmem_free(ipp, sizeof (*ipp)); 2168 break; 2169 } 2170 2171 if (ipp->p_vers != ISCSI_INTERFACE_VERSION) { 2172 rtn = EINVAL; 2173 kmem_free(ipp, sizeof (*ipp)); 2174 break; 2175 } 2176 2177 rtn = iscsi_target_prop_mod(ihp, ipp, cmd); 2178 if (rtn == 0) 2179 rtn = ddi_copyout(ipp, (caddr_t)arg, 2180 sizeof (*ipp), mode); 2181 kmem_free(ipp, sizeof (*ipp)); 2182 break; 2183 2184 /* 2185 * ISCSI_TARGET_ADDRESS_GET - 2186 */ 2187 case ISCSI_TARGET_ADDRESS_GET: 2188 if (ddi_copyin((caddr_t)arg, &ial, sizeof (ial), mode)) { 2189 rtn = EFAULT; 2190 break; 2191 } 2192 2193 if (ial.al_vers != ISCSI_INTERFACE_VERSION) { 2194 rtn = EINVAL; 2195 break; 2196 } 2197 2198 /* 2199 * Find out how much space we need to malloc for the users 2200 * request. 2201 */ 2202 list_space = sizeof (iscsi_addr_list_t); 2203 if (ial.al_in_cnt != 0) { 2204 list_space += (sizeof (iscsi_addr_t) * 2205 (ial.al_in_cnt - 1)); 2206 } 2207 ialp = (iscsi_addr_list_t *)kmem_zalloc(list_space, KM_SLEEP); 2208 2209 /* Copy in the header portion */ 2210 bcopy(&ial, ialp, sizeof (ial)); 2211 2212 /* session */ 2213 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2214 rtn = iscsi_sess_get(ialp->al_oid, ihp, &isp); 2215 if (rtn != 0) { 2216 rw_exit(&ihp->hba_sess_list_rwlock); 2217 rtn = EFAULT; 2218 break; 2219 } 2220 2221 ialp->al_out_cnt = 0; 2222 ialp->al_tpgt = isp->sess_tpgt_conf; 2223 rw_enter(&isp->sess_conn_list_rwlock, RW_READER); 2224 for (icp = isp->sess_conn_list; icp; icp = icp->conn_next) { 2225 if (icp->conn_state != ISCSI_CONN_STATE_LOGGED_IN) { 2226 continue; 2227 } 2228 if (ialp->al_out_cnt < ialp->al_in_cnt) { 2229 iscsi_addr_t *ap; 2230 2231 ap = &ialp->al_addrs[ialp->al_out_cnt]; 2232 if (icp->conn_base_addr.sin.sa_family 2233 == AF_INET) { 2234 2235 struct sockaddr_in *addr_in = 2236 (struct sockaddr_in *)&icp-> 2237 conn_base_addr.sin4; 2238 ap->a_addr.i_insize = 2239 sizeof (struct in_addr); 2240 bcopy(&addr_in->sin_addr.s_addr, 2241 &ap->a_addr.i_addr.in4.s_addr, 2242 sizeof (struct in_addr)); 2243 ap->a_port = addr_in->sin_port; 2244 2245 } else { 2246 2247 struct sockaddr_in6 *addr_in6 = 2248 (struct sockaddr_in6 *)&icp-> 2249 conn_base_addr.sin6; 2250 ap->a_addr.i_insize = 2251 sizeof (struct in6_addr); 2252 bcopy(&addr_in6->sin6_addr.s6_addr, 2253 &ap->a_addr.i_addr.in6.s6_addr, 2254 sizeof (struct in6_addr)); 2255 ap->a_port = addr_in6->sin6_port; 2256 2257 } 2258 } 2259 ialp->al_out_cnt++; 2260 } 2261 rw_exit(&isp->sess_conn_list_rwlock); 2262 rw_exit(&ihp->hba_sess_list_rwlock); 2263 2264 rtn = ddi_copyout(ialp, (caddr_t)arg, list_space, mode); 2265 kmem_free(ialp, list_space); 2266 break; 2267 2268 /* 2269 * ISCSI_CHAP_SET - 2270 */ 2271 case ISCSI_CHAP_SET: 2272 chap = (iscsi_chap_props_t *)kmem_zalloc(sizeof (*chap), 2273 KM_SLEEP); 2274 if (ddi_copyin((caddr_t)arg, chap, sizeof (*chap), mode)) { 2275 rtn = EFAULT; 2276 kmem_free(chap, sizeof (*chap)); 2277 break; 2278 } else if (chap->c_vers != ISCSI_INTERFACE_VERSION) { 2279 rtn = EINVAL; 2280 kmem_free(chap, sizeof (*chap)); 2281 break; 2282 } 2283 2284 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2285 if (chap->c_oid == ihp->hba_oid) 2286 name = ihp->hba_name; 2287 else { 2288 rtn = iscsi_sess_get(chap->c_oid, ihp, &isp); 2289 if (rtn != 0) { 2290 rtn = iscsi_sess_get_by_target( 2291 chap->c_oid, ihp, &isp); 2292 } 2293 2294 /* 2295 * If rtn is zero then we have found an 2296 * existing session. Use the session name to 2297 * do param lookup. If rtn is non-zero then 2298 * create a targetparam object and use its name 2299 * for param lookup. 2300 */ 2301 if (rtn == 0) { 2302 name = isp->sess_name; 2303 } else { 2304 name = 2305 iscsi_targetparam_get_name(chap->c_oid); 2306 rtn = 0; 2307 } 2308 } 2309 2310 if (name == NULL) { 2311 rw_exit( 2312 &ihp->hba_sess_list_rwlock); 2313 rtn = EFAULT; 2314 kmem_free(chap, sizeof (*chap)); 2315 break; 2316 } 2317 2318 if (persistent_chap_set((char *)name, chap) == 2319 B_FALSE) { 2320 rtn = EIO; 2321 } 2322 rw_exit(&ihp->hba_sess_list_rwlock); 2323 kmem_free(chap, sizeof (*chap)); 2324 break; 2325 2326 /* 2327 * ISCSI_CHAP_GET - 2328 */ 2329 case ISCSI_CHAP_GET: 2330 chap = (iscsi_chap_props_t *)kmem_zalloc(sizeof (*chap), 2331 KM_SLEEP); 2332 if (ddi_copyin((caddr_t)arg, chap, sizeof (*chap), mode)) { 2333 kmem_free(chap, sizeof (*chap)); 2334 rtn = EFAULT; 2335 break; 2336 } else if (chap->c_vers != ISCSI_INTERFACE_VERSION) { 2337 kmem_free(chap, sizeof (*chap)); 2338 rtn = EINVAL; 2339 break; 2340 } 2341 2342 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2343 if (chap->c_oid == ihp->hba_oid) 2344 name = ihp->hba_name; 2345 else { 2346 rtn = iscsi_sess_get(chap->c_oid, ihp, &isp); 2347 if (rtn != 0) { 2348 rtn = iscsi_sess_get_by_target( 2349 chap->c_oid, ihp, &isp); 2350 } 2351 2352 /* 2353 * If rtn is zero then we have found an 2354 * existing session. Use the session name to 2355 * do param lookup. If rtn is non-zero then 2356 * create a targetparam object and use its name 2357 * for param lookup. 2358 */ 2359 if (rtn == 0) { 2360 name = isp->sess_name; 2361 } else { 2362 rtn = 0; 2363 name = 2364 iscsi_targetparam_get_name(chap->c_oid); 2365 } 2366 2367 if (name == NULL) { 2368 rw_exit(&ihp->hba_sess_list_rwlock); 2369 rtn = EFAULT; 2370 break; 2371 } 2372 /* 2373 * Initialize the target-side chap name to the 2374 * session name if no chap settings have been 2375 * saved for the current session. 2376 */ 2377 if (persistent_chap_get((char *)name, 2378 chap) == B_FALSE) { 2379 int name_len = strlen((char *)name); 2380 iscsi_chap_props_t *chap = NULL; 2381 chap = (iscsi_chap_props_t *)kmem_zalloc 2382 (sizeof (iscsi_chap_props_t), KM_SLEEP); 2383 bcopy((char *)name, chap->c_user, name_len); 2384 chap->c_user_len = name_len; 2385 (void) (persistent_chap_set((char *)name, 2386 chap)); 2387 kmem_free(chap, sizeof (*chap)); 2388 } 2389 } 2390 2391 if (name == NULL) { 2392 rw_exit( 2393 &ihp->hba_sess_list_rwlock); 2394 rtn = EFAULT; 2395 break; 2396 } 2397 2398 if (persistent_chap_get((char *)name, chap) == B_FALSE) { 2399 rw_exit(&ihp->hba_sess_list_rwlock); 2400 rtn = EIO; 2401 break; 2402 } 2403 rw_exit(&ihp->hba_sess_list_rwlock); 2404 2405 rtn = ddi_copyout(chap, (caddr_t)arg, sizeof (*chap), mode); 2406 kmem_free(chap, sizeof (*chap)); 2407 break; 2408 2409 /* 2410 * ISCSI_CHAP_CLEAR - 2411 */ 2412 case ISCSI_CHAP_CLEAR: 2413 chap = (iscsi_chap_props_t *)kmem_zalloc(sizeof (*chap), 2414 KM_SLEEP); 2415 if (ddi_copyin((caddr_t)arg, chap, sizeof (*chap), mode)) { 2416 rtn = EFAULT; 2417 kmem_free(chap, sizeof (*chap)); 2418 break; 2419 } else if (chap->c_vers != ISCSI_INTERFACE_VERSION) { 2420 rtn = EINVAL; 2421 kmem_free(chap, sizeof (*chap)); 2422 break; 2423 } 2424 2425 if (chap->c_oid == ihp->hba_oid) { 2426 iscsi_sess_t *sessp; 2427 2428 name = ihp->hba_name; 2429 2430 if (persistent_chap_clear( 2431 (char *)name) == B_FALSE) { 2432 rtn = EIO; 2433 } 2434 2435 /* 2436 * Loop through all sessions and memset their 2437 * (initiator's) passwords 2438 */ 2439 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2440 for (sessp = ihp->hba_sess_list; sessp; 2441 sessp = sessp->sess_next) { 2442 (void) memset(sessp->sess_auth.password, 2443 0, iscsiAuthStringMaxLength); 2444 sessp->sess_auth.password_length = 0; 2445 } 2446 rw_exit(&ihp->hba_sess_list_rwlock); 2447 2448 } else { 2449 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 2450 /* 2451 * If the oid does represent a session check to see 2452 * if it is a target oid. If so, return the target's 2453 * associated session. 2454 */ 2455 rtn = iscsi_sess_get(chap->c_oid, ihp, &isp); 2456 if (rtn != 0) { 2457 rtn = iscsi_sess_get_by_target(chap->c_oid, 2458 ihp, &isp); 2459 } 2460 2461 rw_exit(&ihp->hba_sess_list_rwlock); 2462 2463 /* 2464 * If rtn is zero then we have found an 2465 * existing session. Use the session name to 2466 * do param lookup. If rtn is non-zero then 2467 * create a targetparam object and use its name 2468 * for param lookup. 2469 */ 2470 if (rtn == 0) { 2471 name = isp->sess_name; 2472 } else { 2473 name = 2474 iscsi_targetparam_get_name(chap->c_oid); 2475 rtn = 0; 2476 } 2477 2478 if (name == NULL) { 2479 rw_exit( 2480 &ihp->hba_sess_list_rwlock); 2481 rtn = EFAULT; 2482 break; 2483 } 2484 2485 if (persistent_chap_clear( 2486 (char *)name) == B_FALSE) { 2487 rtn = EIO; 2488 } 2489 2490 /* 2491 * Clear out session chap password if we found a 2492 * session above. 2493 */ 2494 if (isp != NULL) { 2495 (void) memset(isp->sess_auth.password_in, 2496 0, iscsiAuthStringMaxLength); 2497 isp->sess_auth.password_length_in = 0; 2498 } 2499 2500 } 2501 2502 kmem_free(chap, sizeof (*chap)); 2503 break; 2504 2505 /* 2506 * ISCSI_STATIC_GET - 2507 */ 2508 case ISCSI_STATIC_GET: 2509 ispp = (iscsi_static_property_t *)kmem_alloc( 2510 sizeof (*ispp), KM_SLEEP); 2511 2512 if (ddi_copyin((caddr_t)arg, ispp, sizeof (*ispp), mode)) { 2513 rtn = EFAULT; 2514 kmem_free(ispp, sizeof (*ispp)); 2515 break; 2516 } 2517 2518 if (ispp->p_vers != ISCSI_INTERFACE_VERSION) { 2519 rtn = EINVAL; 2520 kmem_free(ispp, sizeof (*ispp)); 2521 break; 2522 } 2523 2524 { 2525 void *v = NULL; 2526 boolean_t found = B_FALSE; 2527 2528 persistent_static_addr_lock(); 2529 while (persistent_static_addr_next(&v, 2530 (char *)ispp->p_name, &e) == B_TRUE) { 2531 2532 if (ispp->p_oid == e.e_oid) { 2533 /* 2534 * In case there are multiple 2535 * addresses associated with the 2536 * given target OID, pick the first 2537 * one. 2538 */ 2539 iscsi_addr_t *ap; 2540 2541 ap = &(ispp->p_addr_list.al_addrs[0]); 2542 ap->a_port = e.e_port; 2543 ap->a_addr.i_insize = e.e_insize; 2544 bcopy(e.e_u.u_in6.s6_addr, 2545 ap->a_addr.i_addr.in6.s6_addr, 2546 e.e_insize); 2547 ispp->p_name_len = 2548 strlen((char *)ispp->p_name); 2549 ispp->p_addr_list.al_tpgt = e.e_tpgt; 2550 ispp->p_addr_list.al_out_cnt = 1; 2551 2552 found = B_TRUE; 2553 break; 2554 } 2555 } 2556 persistent_static_addr_unlock(); 2557 2558 if (found == B_TRUE) { 2559 rtn = ddi_copyout(ispp, (caddr_t)arg, 2560 sizeof (*ispp), mode); 2561 } else { 2562 rtn = ENOENT; 2563 } 2564 } 2565 kmem_free(ispp, sizeof (*ispp)); 2566 2567 break; 2568 2569 /* 2570 * ISCSI_STATIC_SET - 2571 */ 2572 case ISCSI_STATIC_SET: 2573 target = iscsi_ioctl_copyin((caddr_t)arg, mode, 2574 sizeof (*target)); 2575 if (target == NULL) { 2576 rtn = EFAULT; 2577 break; 2578 } 2579 2580 if (target->te_entry.e_vers != ISCSI_INTERFACE_VERSION) { 2581 kmem_free(target, sizeof (*target)); 2582 rtn = EINVAL; 2583 break; 2584 } 2585 2586 /* Check if the target's already been added */ 2587 { 2588 boolean_t static_target_found = B_FALSE; 2589 void *v = NULL; 2590 2591 name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 2592 persistent_static_addr_lock(); 2593 while (persistent_static_addr_next(&v, (char *)name, 2594 &e) == B_TRUE) { 2595 /* 2596 * MC/S - Need to check IP address and port 2597 * number as well when we support MC/S. 2598 */ 2599 if ((strncmp((char *)name, 2600 (char *)target->te_name, 2601 ISCSI_MAX_NAME_LEN) == 0) && 2602 (target->te_entry.e_tpgt == e.e_tpgt) && 2603 (target->te_entry.e_insize == e.e_insize) && 2604 (bcmp(&target->te_entry.e_u, &e.e_u, 2605 e.e_insize) == 0)) { 2606 /* 2607 * We don't allow MC/S for now but 2608 * we do allow adding the same target 2609 * with different TPGTs (hence, 2610 * different sessions). 2611 */ 2612 static_target_found = B_TRUE; 2613 break; 2614 } 2615 } 2616 persistent_static_addr_unlock(); 2617 kmem_free(name, ISCSI_MAX_NAME_LEN); 2618 2619 if (static_target_found == B_TRUE) { 2620 /* Duplicate entry */ 2621 kmem_free(target, sizeof (*target)); 2622 rtn = EEXIST; 2623 break; 2624 } 2625 } 2626 2627 if (target->te_entry.e_oid == ISCSI_OID_NOTSET) { 2628 mutex_enter(&iscsi_oid_mutex); 2629 target->te_entry.e_oid = iscsi_oid++; 2630 mutex_exit(&iscsi_oid_mutex); 2631 } 2632 2633 persistent_static_addr_lock(); 2634 if (persistent_static_addr_set((char *)target->te_name, 2635 &target->te_entry) == B_FALSE) { 2636 persistent_static_addr_unlock(); 2637 kmem_free(target, sizeof (*target)); 2638 rtn = EIO; 2639 break; 2640 } 2641 persistent_static_addr_unlock(); 2642 2643 /* 2644 * If Static Targets discovery is enabled, then add 2645 * target to discovery queue. Otherwise, just create 2646 * the session for potential future use. 2647 */ 2648 method = persistent_disc_meth_get(); 2649 if (method & iSCSIDiscoveryMethodStatic) { 2650 iscsid_poke_discovery(ihp, iSCSIDiscoveryMethodStatic); 2651 (void) iscsid_login_tgt(ihp, (char *)target->te_name, 2652 iSCSIDiscoveryMethodStatic, NULL); 2653 } 2654 2655 rtn = iscsi_ioctl_copyout(target, sizeof (*target), 2656 (caddr_t)arg, mode); 2657 break; 2658 2659 /* 2660 * ISCSI_STATIC_CLEAR - 2661 */ 2662 case ISCSI_STATIC_CLEAR: 2663 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 2664 rtn = EFAULT; 2665 break; 2666 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 2667 rtn = EINVAL; 2668 break; 2669 } 2670 2671 { 2672 boolean_t found = B_FALSE; 2673 void *v = NULL; 2674 entry_t tmp_e; 2675 char *name = NULL; 2676 2677 name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 2678 2679 /* Find name for matching static_tgt oid */ 2680 persistent_static_addr_lock(); 2681 while (persistent_static_addr_next(&v, 2682 (char *)name, &tmp_e) == B_TRUE) { 2683 if (e.e_oid == tmp_e.e_oid) { 2684 found = B_TRUE; 2685 break; 2686 } 2687 } 2688 2689 /* If static_tgt found logout and remove it */ 2690 if (found == B_TRUE) { 2691 2692 iscsid_addr_to_sockaddr(tmp_e.e_insize, 2693 &tmp_e.e_u, tmp_e.e_port, &addr_dsc.sin); 2694 2695 /* Attempt to logout of target */ 2696 if (iscsid_del(ihp, (char *)name, 2697 iSCSIDiscoveryMethodStatic, &addr_dsc.sin) 2698 == B_TRUE) { 2699 persistent_static_addr_unlock(); 2700 2701 /* remove from persistent store */ 2702 if (persistent_static_addr_clear( 2703 e.e_oid) == B_FALSE) { 2704 rtn = EIO; 2705 } 2706 2707 iscsid_poke_discovery(ihp, 2708 iSCSIDiscoveryMethodStatic); 2709 (void) iscsid_login_tgt(ihp, 2710 (char *)name, 2711 iSCSIDiscoveryMethodStatic, 2712 NULL); 2713 2714 } else { 2715 persistent_static_addr_unlock(); 2716 rtn = EBUSY; 2717 } 2718 } else { 2719 persistent_static_addr_unlock(); 2720 rtn = EIO; 2721 } 2722 kmem_free(name, ISCSI_MAX_NAME_LEN); 2723 } 2724 break; 2725 2726 /* 2727 * ISCSI_ISNS_SERVER_ADDR_SET: 2728 */ 2729 case ISCSI_ISNS_SERVER_ADDR_SET: 2730 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 2731 rtn = EFAULT; 2732 break; 2733 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 2734 rtn = EINVAL; 2735 break; 2736 } 2737 2738 if (persistent_isns_addr_set(&e) == B_FALSE) { 2739 rtn = EIO; 2740 break; 2741 } 2742 2743 /* 2744 * If iSNS server discovery is enabled, then kickoff 2745 * discovery of the targets advertised by the recently 2746 * added iSNS server address. 2747 */ 2748 method = persistent_disc_meth_get(); 2749 if (method & iSCSIDiscoveryMethodISNS) { 2750 initiator_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, 2751 KM_SLEEP); 2752 if (persistent_initiator_name_get(initiator_node_name, 2753 ISCSI_MAX_NAME_LEN) != B_TRUE) { 2754 kmem_free(initiator_node_name, 2755 ISCSI_MAX_NAME_LEN); 2756 initiator_node_name = NULL; 2757 rtn = EIO; 2758 break; 2759 } 2760 if (strlen(initiator_node_name) == 0) { 2761 kmem_free(initiator_node_name, 2762 ISCSI_MAX_NAME_LEN); 2763 initiator_node_name = NULL; 2764 rtn = EIO; 2765 break; 2766 } 2767 2768 initiator_node_alias = kmem_zalloc(ISCSI_MAX_NAME_LEN, 2769 KM_SLEEP); 2770 if (persistent_alias_name_get(initiator_node_alias, 2771 ISCSI_MAX_NAME_LEN) != B_TRUE) { 2772 initiator_node_alias[0] = '\0'; 2773 } 2774 2775 /* 2776 * Register this initiator node against this iSNS 2777 * server. 2778 */ 2779 (void) isns_reg_one_server(&e, ihp->hba_isid, 2780 (uint8_t *)initiator_node_name, 2781 ISCSI_MAX_NAME_LEN, 2782 (uint8_t *)initiator_node_alias, 2783 ISCSI_MAX_NAME_LEN, 2784 ISNS_INITIATOR_NODE_TYPE, 2785 isns_scn_callback); 2786 2787 iscsid_do_isns_query_one_server(ihp, &e); 2788 2789 iscsid_addr_to_sockaddr(e.e_insize, 2790 &e.e_u, e.e_port, &addr_dsc.sin); 2791 2792 (void) iscsid_login_tgt(ihp, NULL, 2793 iSCSIDiscoveryMethodISNS, 2794 &addr_dsc.sin); 2795 2796 /* Done using the name and alias - free them. */ 2797 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 2798 initiator_node_name = NULL; 2799 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN); 2800 initiator_node_alias = NULL; 2801 } 2802 break; 2803 2804 /* 2805 * ISCSI_DISCOVERY_ADDR_SET: 2806 */ 2807 case ISCSI_DISCOVERY_ADDR_SET: 2808 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 2809 rtn = EFAULT; 2810 break; 2811 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 2812 rtn = EINVAL; 2813 break; 2814 } 2815 2816 if (e.e_oid == ISCSI_OID_NOTSET) { 2817 mutex_enter(&iscsi_oid_mutex); 2818 e.e_oid = iscsi_oid++; 2819 mutex_exit(&iscsi_oid_mutex); 2820 } 2821 2822 if (persistent_disc_addr_set(&e) == B_FALSE) { 2823 rtn = EIO; 2824 break; 2825 } 2826 2827 /* 2828 * If Send Targets discovery is enabled, then kickoff 2829 * discovery of the targets advertised by the recently 2830 * added discovery address. 2831 */ 2832 method = persistent_disc_meth_get(); 2833 if (method & iSCSIDiscoveryMethodSendTargets) { 2834 2835 iscsid_addr_to_sockaddr(e.e_insize, 2836 &e.e_u, e.e_port, &addr_dsc.sin); 2837 iscsid_do_sendtgts(&e); 2838 (void) iscsid_login_tgt(ihp, NULL, 2839 iSCSIDiscoveryMethodSendTargets, 2840 &addr_dsc.sin); 2841 2842 } 2843 break; 2844 2845 /* 2846 * ISCSI_DISCOVERY_ADDR_LIST_GET 2847 */ 2848 case ISCSI_DISCOVERY_ADDR_LIST_GET: 2849 /* copyin user args */ 2850 if (ddi_copyin((caddr_t)arg, &ial, sizeof (ial), mode)) { 2851 rtn = EFAULT; 2852 break; 2853 } 2854 2855 if (ial.al_vers != ISCSI_INTERFACE_VERSION) { 2856 rtn = EINVAL; 2857 break; 2858 } 2859 2860 list_space = sizeof (iscsi_addr_list_t); 2861 if (ial.al_in_cnt != 0) { 2862 list_space += (sizeof (iscsi_addr_t) * 2863 (ial.al_in_cnt - 1)); 2864 } 2865 2866 ialp = kmem_zalloc(list_space, KM_SLEEP); 2867 bcopy(&ial, ialp, sizeof (iscsi_addr_list_t)); 2868 2869 void_p = NULL; 2870 ialp->al_out_cnt = 0; 2871 persistent_disc_addr_lock(); 2872 while (persistent_disc_addr_next(&void_p, &e) == B_TRUE) { 2873 if (ialp->al_out_cnt < ialp->al_in_cnt) { 2874 int i = ialp->al_out_cnt; 2875 iscsi_addr_t *addr = &ialp->al_addrs[i]; 2876 2877 addr->a_port = e.e_port; 2878 addr->a_addr.i_insize = e.e_insize; 2879 addr->a_oid = e.e_oid; 2880 2881 if (e.e_insize == sizeof (struct in_addr)) { 2882 /* IPv4 */ 2883 addr->a_addr.i_addr.in4.s_addr = 2884 e.e_u.u_in4.s_addr; 2885 } else if (e.e_insize == 2886 sizeof (struct in6_addr)) { 2887 /* IPv6 */ 2888 bcopy(e.e_u.u_in6.s6_addr, 2889 addr->a_addr.i_addr.in6.s6_addr, 2890 16); 2891 } 2892 } 2893 ialp->al_out_cnt++; 2894 } 2895 persistent_disc_addr_unlock(); 2896 2897 rtn = ddi_copyout(ialp, (caddr_t)arg, list_space, mode); 2898 kmem_free(ialp, list_space); 2899 break; 2900 2901 /* 2902 * ISCSI_ISNS_SERVER_ADDR_LIST_GET 2903 */ 2904 case ISCSI_ISNS_SERVER_ADDR_LIST_GET: 2905 /* copyin user args */ 2906 if (ddi_copyin((caddr_t)arg, &ial, sizeof (ial), mode)) { 2907 rtn = EFAULT; 2908 break; 2909 } 2910 2911 if (ial.al_vers != ISCSI_INTERFACE_VERSION) { 2912 rtn = EINVAL; 2913 break; 2914 } 2915 2916 list_space = sizeof (iscsi_addr_list_t); 2917 if (ial.al_in_cnt != 0) { 2918 list_space += (sizeof (iscsi_addr_t) * 2919 (ial.al_in_cnt - 1)); 2920 } 2921 2922 ialp = kmem_zalloc(list_space, KM_SLEEP); 2923 bcopy(&ial, ialp, sizeof (iscsi_addr_list_t)); 2924 2925 void_p = NULL; 2926 ialp->al_out_cnt = 0; 2927 persistent_isns_addr_lock(); 2928 while (persistent_isns_addr_next(&void_p, &e) == B_TRUE) { 2929 if (ialp->al_out_cnt < ialp->al_in_cnt) { 2930 int i = ialp->al_out_cnt; 2931 iscsi_addr_t *addr = &ialp->al_addrs[i]; 2932 2933 addr->a_port = e.e_port; 2934 addr->a_addr.i_insize = e.e_insize; 2935 if (e.e_insize == sizeof (struct in_addr)) { 2936 /* IPv4 */ 2937 addr->a_addr.i_addr.in4.s_addr = 2938 e.e_u.u_in4.s_addr; 2939 } else if (e.e_insize == 2940 sizeof (struct in6_addr)) { 2941 /* IPv6 */ 2942 bcopy(e.e_u.u_in6.s6_addr, 2943 addr->a_addr.i_addr.in6.s6_addr, 2944 16); 2945 } 2946 } 2947 ialp->al_out_cnt++; 2948 } 2949 persistent_isns_addr_unlock(); 2950 2951 rtn = ddi_copyout(ialp, (caddr_t)arg, list_space, mode); 2952 kmem_free(ialp, list_space); 2953 break; 2954 2955 /* 2956 * ISCSI_DISCOVERY_ADDR_CLEAR: 2957 */ 2958 case ISCSI_DISCOVERY_ADDR_CLEAR: 2959 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 2960 rtn = EFAULT; 2961 break; 2962 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 2963 rtn = EINVAL; 2964 break; 2965 } 2966 2967 iscsid_addr_to_sockaddr(e.e_insize, 2968 &e.e_u, e.e_port, &addr_dsc.sin); 2969 2970 /* Attempt to logout of associated targets */ 2971 if (iscsid_del(ihp, NULL, 2972 iSCSIDiscoveryMethodSendTargets, &addr_dsc.sin) == 2973 B_TRUE) { 2974 /* Logout successful remove disc. addr. */ 2975 if (persistent_disc_addr_clear(&e) == B_FALSE) { 2976 rtn = EIO; 2977 } 2978 } else { 2979 rtn = EBUSY; 2980 } 2981 break; 2982 2983 /* 2984 * ISCSI_ISNS_SERVER_CLEAR: 2985 */ 2986 case ISCSI_ISNS_SERVER_ADDR_CLEAR: 2987 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) { 2988 rtn = EFAULT; 2989 break; 2990 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) { 2991 rtn = EINVAL; 2992 break; 2993 } 2994 2995 iscsid_addr_to_sockaddr(e.e_insize, 2996 &e.e_u, e.e_port, &addr_dsc.sin); 2997 2998 /* Attempt logout of associated targets */ 2999 if (iscsid_del(ihp, NULL, iSCSIDiscoveryMethodISNS, 3000 &addr_dsc.sin) == B_TRUE) { 3001 /* Logout successful */ 3002 3003 if (persistent_isns_addr_clear(&e) == B_FALSE) { 3004 rtn = EIO; 3005 break; 3006 } 3007 3008 method = persistent_disc_meth_get(); 3009 if (method & iSCSIDiscoveryMethodISNS) { 3010 boolean_t is_last_isns_server_b = 3011 B_FALSE; 3012 int isns_server_count = 0; 3013 void *void_p = NULL; 3014 3015 /* 3016 * Check if the last iSNS server's been 3017 * removed. 3018 */ 3019 { 3020 entry_t tmp_e; 3021 persistent_isns_addr_lock(); 3022 while (persistent_isns_addr_next( 3023 &void_p, &tmp_e) == B_TRUE) { 3024 isns_server_count++; 3025 } 3026 } 3027 persistent_isns_addr_unlock(); 3028 if (isns_server_count == 0) { 3029 is_last_isns_server_b = B_TRUE; 3030 } 3031 3032 /* 3033 * Deregister this node from this iSNS 3034 * server. 3035 */ 3036 initiator_node_name = kmem_zalloc( 3037 ISCSI_MAX_NAME_LEN, KM_SLEEP); 3038 if (persistent_initiator_name_get( 3039 initiator_node_name, 3040 ISCSI_MAX_NAME_LEN) == B_TRUE) { 3041 3042 if (strlen(initiator_node_name) > 0) { 3043 (void) isns_dereg_one_server( 3044 &e, (uint8_t *) 3045 initiator_node_name, 3046 is_last_isns_server_b); 3047 } 3048 } 3049 kmem_free(initiator_node_name, 3050 ISCSI_MAX_NAME_LEN); 3051 initiator_node_name = NULL; 3052 } 3053 } else { 3054 rtn = EBUSY; 3055 } 3056 break; 3057 3058 /* 3059 * ISCSI_DISCOVERY_SET - 3060 */ 3061 case ISCSI_DISCOVERY_SET: 3062 if (ddi_copyin((caddr_t)arg, &method, sizeof (method), mode)) { 3063 rtn = EFAULT; 3064 break; 3065 } 3066 3067 if (persistent_disc_meth_set(method) == B_FALSE) { 3068 rtn = EIO; 3069 } else { 3070 (void) iscsid_enable_discovery(ihp, method, B_FALSE); 3071 iscsid_poke_discovery(ihp, method); 3072 (void) iscsid_login_tgt(ihp, NULL, method, NULL); 3073 } 3074 break; 3075 3076 /* 3077 * ISCSI_DISCOVERY_GET - 3078 */ 3079 case ISCSI_DISCOVERY_GET: 3080 method = persistent_disc_meth_get(); 3081 rtn = ddi_copyout(&method, (caddr_t)arg, 3082 sizeof (method), mode); 3083 break; 3084 3085 /* 3086 * ISCSI_DISCOVERY_CLEAR - 3087 */ 3088 #define ISCSI_DISCOVERY_DELAY 2 /* seconds */ 3089 case ISCSI_DISCOVERY_CLEAR: 3090 if (ddi_copyin((caddr_t)arg, &method, sizeof (method), mode)) { 3091 rtn = EFAULT; 3092 break; 3093 } 3094 3095 /* If discovery in progress, try few times before return busy */ 3096 retry = 0; 3097 mutex_enter(&ihp->hba_discovery_events_mutex); 3098 while (ihp->hba_discovery_in_progress == B_TRUE) { 3099 if (++retry == 5) { 3100 rtn = EBUSY; 3101 break; 3102 } 3103 mutex_exit(&ihp->hba_discovery_events_mutex); 3104 delay(SEC_TO_TICK(ISCSI_DISCOVERY_DELAY)); 3105 mutex_enter(&ihp->hba_discovery_events_mutex); 3106 } 3107 #undef ISCSI_DISCOVERY_DELAY 3108 3109 /* 3110 * Clear discovery first, so that any bus config or 3111 * discovery requests will ignore this discovery method 3112 */ 3113 if (rtn == 0 && persistent_disc_meth_clear(method) == B_FALSE) { 3114 rtn = EIO; 3115 } 3116 mutex_exit(&ihp->hba_discovery_events_mutex); 3117 3118 if (rtn != 0) { 3119 break; 3120 } 3121 3122 /* Attempt to logout from all associated targets */ 3123 if (iscsid_disable_discovery(ihp, method) == B_FALSE) { 3124 /* Failure!, reset the discovery */ 3125 if (persistent_disc_meth_set(method) == B_FALSE) { 3126 cmn_err(CE_WARN, "Failed to reset discovery " 3127 "method after discovery disable failure."); 3128 } 3129 rtn = EBUSY; 3130 } 3131 break; 3132 3133 /* 3134 * ISCSI_DISCOVERY_PROPS - 3135 */ 3136 case ISCSI_DISCOVERY_PROPS: 3137 iscsid_props(&discovery_props); 3138 if (ddi_copyout(&discovery_props, (caddr_t)arg, 3139 sizeof (discovery_props), mode)) 3140 rtn = EFAULT; 3141 break; 3142 3143 /* 3144 * ISCSI_LUN_OID_LIST -- 3145 */ 3146 case ISCSI_LUN_OID_LIST_GET: 3147 ll = (iscsi_lun_list_t *)kmem_alloc(sizeof (*ll), KM_SLEEP); 3148 if (ddi_copyin((caddr_t)arg, ll, sizeof (*ll), mode)) { 3149 rtn = EFAULT; 3150 kmem_free(ll, sizeof (*ll)); 3151 break; 3152 } 3153 3154 if (ll->ll_vers != ISCSI_INTERFACE_VERSION) { 3155 rtn = EINVAL; 3156 kmem_free(ll, sizeof (*ll)); 3157 break; 3158 } 3159 3160 /* 3161 * Find out how much space the user has allocated in their 3162 * structure. Match the same space for our structure. 3163 */ 3164 lun_sz = sizeof (iscsi_lun_list_t); 3165 if (ll->ll_in_cnt > 0) { 3166 lun_sz += (ll->ll_in_cnt - 1) * sizeof (iscsi_if_lun_t); 3167 } 3168 3169 llp = kmem_zalloc(lun_sz, KM_SLEEP); 3170 bcopy(ll, llp, sizeof (*ll)); 3171 kmem_free(ll, sizeof (*ll)); 3172 3173 /* 3174 * Check to see if oid references a target-param oid. If so, 3175 * find the associated session oid before getting lu list. 3176 */ 3177 if (iscsi_targetparam_get_name(llp->ll_tgt_oid) != NULL) { 3178 for (isp = ihp->hba_sess_list; isp; 3179 isp = isp->sess_next) { 3180 if (isp->sess_target_oid == llp->ll_tgt_oid) { 3181 target_oid = isp->sess_oid; 3182 break; 3183 } 3184 } 3185 } else { 3186 target_oid = llp->ll_tgt_oid; 3187 } 3188 3189 3190 /* 3191 * Look at the LUNs attached to the specified target. If there 3192 * is space in the user structure save that information locally. 3193 * Always add up the count to the total. By always adding 3194 * the count this code can be used if ll_in_cnt == 0 and 3195 * the user just wishes to know the appropriate size to 3196 * allocate. 3197 */ 3198 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3199 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) { 3200 if ((llp->ll_all_tgts == B_FALSE) && 3201 (isp->sess_oid != target_oid)) { 3202 continue; 3203 } 3204 rw_enter(&isp->sess_lun_list_rwlock, RW_READER); 3205 for (ilp = isp->sess_lun_list; ilp; 3206 ilp = ilp->lun_next) { 3207 if ((ilp->lun_state & 3208 ISCSI_LUN_STATE_ONLINE) && 3209 !(ilp->lun_state & 3210 ISCSI_LUN_STATE_INVALID)) { 3211 if (llp->ll_out_cnt < 3212 llp->ll_in_cnt) { 3213 iscsi_if_lun_t *lp; 3214 lp = &llp->ll_luns[ 3215 llp->ll_out_cnt]; 3216 3217 lp->l_tgt_oid = 3218 isp->sess_oid; 3219 lp->l_oid = ilp->lun_oid; 3220 lp->l_num = ilp->lun_num; 3221 } 3222 llp->ll_out_cnt++; 3223 } 3224 } 3225 rw_exit(&isp->sess_lun_list_rwlock); 3226 } 3227 rw_exit(&ihp->hba_sess_list_rwlock); 3228 3229 if (ddi_copyout(llp, (caddr_t)arg, lun_sz, mode)) { 3230 rtn = EFAULT; 3231 } 3232 3233 kmem_free(llp, lun_sz); 3234 break; 3235 3236 /* 3237 * ISCSI_LUN_PROPS_GET -- 3238 */ 3239 case ISCSI_LUN_PROPS_GET: 3240 lun = (iscsi_lun_props_t *)kmem_zalloc(sizeof (*lun), KM_SLEEP); 3241 if (ddi_copyin((caddr_t)arg, lun, sizeof (*lun), mode)) { 3242 rtn = EFAULT; 3243 kmem_free(lun, sizeof (*lun)); 3244 break; 3245 } 3246 3247 if (lun->lp_vers != ISCSI_INTERFACE_VERSION) { 3248 rtn = EINVAL; 3249 kmem_free(lun, sizeof (*lun)); 3250 break; 3251 } 3252 3253 /* 3254 * For the target specified, find the LUN specified and 3255 * return its properties 3256 */ 3257 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3258 rtn = iscsi_sess_get(lun->lp_tgt_oid, ihp, &isp); 3259 if (rtn != 0) { 3260 rw_exit(&ihp->hba_sess_list_rwlock); 3261 rtn = EFAULT; 3262 kmem_free(lun, sizeof (*lun)); 3263 break; 3264 } 3265 rtn = EINVAL; /* Set bad rtn, correct only if found */ 3266 rw_enter(&isp->sess_lun_list_rwlock, RW_READER); 3267 for (ilp = isp->sess_lun_list; ilp; ilp = ilp->lun_next) { 3268 if (ilp->lun_oid == lun->lp_oid) { 3269 lun->lp_num = ilp->lun_num; 3270 lun->lp_status = LunValid; 3271 lun->lp_time_online = ilp->lun_time_online; 3272 3273 if (ilp->lun_pip != NULL) { 3274 lun_dip = mdi_pi_get_client( 3275 ilp->lun_pip); 3276 } else { 3277 lun_dip = ilp->lun_dip; 3278 } 3279 3280 if (lun_dip != NULL && 3281 ((i_ddi_devi_attached(lun_dip)) || 3282 (ddi_get_devstate(lun_dip) == 3283 DDI_DEVSTATE_UP))) { 3284 (void) ddi_pathname(lun_dip, 3285 lun->lp_pathname); 3286 } else { 3287 /* 3288 * The LUN is not exported to the 3289 * OS yet. It is in the process 3290 * of being added. 3291 */ 3292 lun->lp_status = LunDoesNotExist; 3293 } 3294 bcopy(ilp->lun_vid, lun->lp_vid, 3295 sizeof (lun->lp_vid)); 3296 bcopy(ilp->lun_pid, lun->lp_pid, 3297 sizeof (lun->lp_pid)); 3298 rtn = ddi_copyout(lun, (caddr_t)arg, 3299 sizeof (*lun), mode); 3300 if (rtn == -1) { 3301 rtn = EFAULT; 3302 } 3303 break; 3304 } 3305 } 3306 rw_exit(&isp->sess_lun_list_rwlock); 3307 rw_exit(&ihp->hba_sess_list_rwlock); 3308 3309 kmem_free(lun, sizeof (*lun)); 3310 break; 3311 3312 /* 3313 * ISCSI_CONN_OID_LIST_GET -- 3314 */ 3315 #define ISCSIIOCOLGC iscsi_ioctl_conn_oid_list_get_copyout 3316 case ISCSI_CONN_OID_LIST_GET: 3317 { 3318 iscsi_conn_list_t *cl; 3319 3320 /* Asuume the worst */ 3321 rtn = EFAULT; 3322 3323 /* Copy the input argument into kernel world. */ 3324 cl = iscsi_ioctl_conn_oid_list_get_copyin( 3325 (caddr_t)arg, 3326 mode); 3327 if (cl != NULL) { 3328 if (iscsi_ioctl_conn_oid_list_get(ihp, cl) == 3329 B_TRUE) { 3330 rtn = 3331 ISCSIIOCOLGC( 3332 cl, (caddr_t)arg, mode); 3333 } 3334 } 3335 break; 3336 } 3337 #undef ISCSIIOCOLGC 3338 /* 3339 * ISCSI_CONN_OID_LIST_GET -- 3340 */ 3341 case ISCSI_CONN_PROPS_GET: 3342 { 3343 iscsi_conn_props_t *cp; 3344 3345 /* Asuume the worst */ 3346 rtn = EFAULT; 3347 3348 /* Copy the input argument into kernel world. */ 3349 cp = iscsi_ioctl_copyin( 3350 (caddr_t)arg, 3351 mode, 3352 sizeof (iscsi_conn_props_t)); 3353 3354 if (cp != NULL) { 3355 /* Get the propereties. */ 3356 if (iscsi_ioctl_conn_props_get(ihp, cp) == 3357 B_TRUE) { 3358 rtn = 3359 iscsi_ioctl_copyout( 3360 cp, 3361 sizeof (*cp), 3362 (caddr_t)arg, 3363 mode); 3364 } else { 3365 kmem_free(cp, sizeof (*cp)); 3366 cp = NULL; 3367 } 3368 } 3369 break; 3370 } 3371 3372 /* 3373 * ISCSI_RADIUS_GET - 3374 */ 3375 case ISCSI_RADIUS_GET: 3376 { 3377 iscsi_nvfile_status_t status; 3378 3379 radius = (iscsi_radius_props_t *)kmem_zalloc(sizeof (*radius), 3380 KM_SLEEP); 3381 if (ddi_copyin((caddr_t)arg, radius, sizeof (*radius), mode)) { 3382 kmem_free(radius, sizeof (*radius)); 3383 rtn = EFAULT; 3384 break; 3385 } else if (radius->r_vers != ISCSI_INTERFACE_VERSION) { 3386 kmem_free(radius, sizeof (*radius)); 3387 rtn = EINVAL; 3388 break; 3389 } 3390 3391 old_oid = radius->r_oid; 3392 3393 if (radius->r_oid == ihp->hba_oid) { 3394 name = ihp->hba_name; 3395 } else { 3396 /* 3397 * RADIUS configuration should be done on a per 3398 * initiator basis. 3399 */ 3400 kmem_free(radius, sizeof (*radius)); 3401 rtn = EINVAL; 3402 break; 3403 } 3404 3405 status = persistent_radius_get(radius); 3406 if (status == ISCSI_NVFILE_SUCCESS) { 3407 /* 3408 * Restore the value for overridden (and bogus) oid. 3409 */ 3410 radius->r_oid = old_oid; 3411 rtn = ddi_copyout(radius, (caddr_t)arg, 3412 sizeof (*radius), mode); 3413 } else if (status == ISCSI_NVFILE_NAMEVAL_NOT_FOUND) { 3414 rtn = ENOENT; 3415 } else { 3416 rtn = EIO; 3417 } 3418 kmem_free(radius, sizeof (*radius)); 3419 break; 3420 } 3421 3422 /* 3423 * ISCSI_RADIUS_SET - 3424 */ 3425 case ISCSI_RADIUS_SET: 3426 radius = (iscsi_radius_props_t *)kmem_zalloc(sizeof (*radius), 3427 KM_SLEEP); 3428 if (ddi_copyin((caddr_t)arg, radius, sizeof (*radius), mode)) { 3429 rtn = EFAULT; 3430 kmem_free(radius, sizeof (*radius)); 3431 break; 3432 } else if (radius->r_vers != ISCSI_INTERFACE_VERSION) { 3433 rtn = EINVAL; 3434 kmem_free(radius, sizeof (*radius)); 3435 break; 3436 } 3437 3438 if (radius->r_oid == ihp->hba_oid) { 3439 name = ihp->hba_name; 3440 } else { 3441 /* 3442 * RADIUS configuration should be done on a per 3443 * initiator basis. 3444 */ 3445 kmem_free(radius, sizeof (*radius)); 3446 rtn = EINVAL; 3447 break; 3448 } 3449 3450 if (persistent_radius_set(radius) == B_FALSE) { 3451 rtn = EIO; 3452 } 3453 3454 kmem_free(radius, sizeof (*radius)); 3455 break; 3456 3457 /* 3458 * ISCSI_AUTH_GET - 3459 */ 3460 case ISCSI_AUTH_GET: 3461 auth = (iscsi_auth_props_t *)kmem_zalloc(sizeof (*auth), 3462 KM_SLEEP); 3463 if (ddi_copyin((caddr_t)arg, auth, sizeof (*auth), mode)) { 3464 kmem_free(auth, sizeof (*auth)); 3465 rtn = EFAULT; 3466 break; 3467 } else if (auth->a_vers != ISCSI_INTERFACE_VERSION) { 3468 kmem_free(auth, sizeof (*auth)); 3469 rtn = EINVAL; 3470 break; 3471 } 3472 3473 old_oid = auth->a_oid; 3474 3475 if (auth->a_oid == ihp->hba_oid) { 3476 name = ihp->hba_name; 3477 } else { 3478 3479 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3480 /* 3481 * If the oid does represent a session check to see 3482 * if it is a target oid. If so, return the target's 3483 * associated session. 3484 */ 3485 rtn = iscsi_sess_get(auth->a_oid, ihp, &isp); 3486 if (rtn != 0) { 3487 rtn = iscsi_sess_get_by_target(auth->a_oid, 3488 ihp, &isp); 3489 } 3490 rw_exit(&ihp->hba_sess_list_rwlock); 3491 3492 /* 3493 * If rtn is zero then we have found an 3494 * existing session. Use the session name to 3495 * do param lookup. If rtn is non-zero then 3496 * create a targetparam object and use its name 3497 * for param lookup. 3498 */ 3499 if (rtn == 0) { 3500 name = isp->sess_name; 3501 } else { 3502 name = 3503 iscsi_targetparam_get_name(auth->a_oid); 3504 } 3505 } 3506 3507 if (name == NULL) { 3508 rw_exit( 3509 &ihp->hba_sess_list_rwlock); 3510 rtn = EFAULT; 3511 break; 3512 } 3513 3514 if (persistent_auth_get((char *)name, auth) == B_TRUE) { 3515 /* 3516 * Restore the value for overridden (and bogus) oid. 3517 */ 3518 auth->a_oid = old_oid; 3519 rtn = ddi_copyout(auth, (caddr_t)arg, 3520 sizeof (*auth), mode); 3521 } else { 3522 rtn = EIO; 3523 } 3524 3525 kmem_free(auth, sizeof (*auth)); 3526 break; 3527 3528 /* 3529 * ISCSI_AUTH_SET - 3530 */ 3531 case ISCSI_AUTH_SET: 3532 auth = (iscsi_auth_props_t *)kmem_zalloc(sizeof (*auth), 3533 KM_SLEEP); 3534 if (ddi_copyin((caddr_t)arg, auth, sizeof (*auth), mode)) { 3535 kmem_free(auth, sizeof (*auth)); 3536 rtn = EFAULT; 3537 break; 3538 } else if (auth->a_vers != ISCSI_INTERFACE_VERSION) { 3539 kmem_free(auth, sizeof (*auth)); 3540 rtn = EINVAL; 3541 break; 3542 } 3543 3544 if (auth->a_oid == ihp->hba_oid) { 3545 name = ihp->hba_name; 3546 } else { 3547 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3548 /* 3549 * If the oid does represent a session check to see 3550 * if it is a target oid. If so, return the target's 3551 * associated session. 3552 */ 3553 rtn = iscsi_sess_get(auth->a_oid, ihp, &isp); 3554 if (rtn != 0) { 3555 rtn = iscsi_sess_get_by_target(auth->a_oid, 3556 ihp, &isp); 3557 } 3558 rw_exit(&ihp->hba_sess_list_rwlock); 3559 3560 /* 3561 * If rtn is zero then we have found an 3562 * existing session. Use the session name to 3563 * do param lookup. If rtn is non-zero then 3564 * create a targetparam object and use its name 3565 * for param lookup. 3566 */ 3567 if (rtn == 0) { 3568 name = isp->sess_name; 3569 } else { 3570 name = 3571 iscsi_targetparam_get_name(auth->a_oid); 3572 rtn = 0; 3573 } 3574 } 3575 3576 if (name == NULL) { 3577 rtn = EFAULT; 3578 } else if (persistent_auth_set((char *)name, auth) 3579 == B_FALSE) { 3580 rtn = EIO; 3581 } 3582 3583 kmem_free(auth, sizeof (*auth)); 3584 break; 3585 3586 /* 3587 * ISCSI_AUTH_CLEAR - 3588 */ 3589 case ISCSI_AUTH_CLEAR: 3590 auth = (iscsi_auth_props_t *)kmem_alloc(sizeof (*auth), 3591 KM_SLEEP); 3592 if (ddi_copyin((caddr_t)arg, auth, sizeof (*auth), mode)) { 3593 kmem_free(auth, sizeof (*auth)); 3594 rtn = EFAULT; 3595 break; 3596 } else if (auth->a_vers != ISCSI_INTERFACE_VERSION) { 3597 kmem_free(auth, sizeof (*auth)); 3598 rtn = EINVAL; 3599 break; 3600 } 3601 3602 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3603 /* 3604 * If the oid does represent a session check to see 3605 * if it is a target oid. If so, return the target's 3606 * associated session. 3607 */ 3608 rtn = iscsi_sess_get(auth->a_oid, ihp, &isp); 3609 if (rtn != 0) { 3610 rtn = iscsi_sess_get_by_target(auth->a_oid, ihp, &isp); 3611 } 3612 rw_exit(&ihp->hba_sess_list_rwlock); 3613 3614 /* 3615 * If rtn is zero then we have found an 3616 * existing session. Use the session name to 3617 * do param lookup. If rtn is non-zero then 3618 * create a targetparam object and use its name 3619 * for param lookup. 3620 */ 3621 if (rtn == 0) { 3622 name = isp->sess_name; 3623 } else { 3624 name = 3625 iscsi_targetparam_get_name(auth->a_oid); 3626 rtn = 0; 3627 discovered = B_FALSE; 3628 } 3629 3630 if (name == NULL) { 3631 rw_exit( 3632 &ihp->hba_sess_list_rwlock); 3633 rtn = EFAULT; 3634 break; 3635 } 3636 3637 if (persistent_auth_clear((char *)name) == B_FALSE) { 3638 rtn = EIO; 3639 } 3640 3641 /* 3642 * ISCSI_TARGET_PARAM_CLEAR, ISCSI_CHAP_CLEAR and 3643 * ISCSI_AUTH_CLEAR ioctl are called sequentially to remove 3644 * target parameters. Here, the target that is not discovered 3645 * by initiator should be removed from the iscsi_targets list 3646 * residing in the memory. 3647 */ 3648 if (discovered == B_FALSE) { 3649 (void) iscsi_targetparam_remove_target(auth->a_oid); 3650 } 3651 3652 kmem_free(auth, sizeof (*auth)); 3653 break; 3654 3655 /* 3656 * ISCSI_DB_DUMP - 3657 */ 3658 case ISCSI_DB_DUMP: 3659 persistent_dump_data(); 3660 break; 3661 3662 case ISCSI_USCSI: 3663 3664 #ifdef _MULTI_DATAMODEL 3665 model = ddi_model_convert_from(mode & FMODELS); 3666 switch (model) { 3667 case DDI_MODEL_ILP32: 3668 3669 if (ddi_copyin((caddr_t)arg, &iu32_caller, 3670 sizeof (iscsi_uscsi32_t), mode)) { 3671 rtn = EFAULT; 3672 break; 3673 } 3674 3675 /* perform conversion from 32 -> 64 */ 3676 iu_caller.iu_vers = iu32_caller.iu_vers; 3677 iu_caller.iu_oid = iu32_caller.iu_oid; 3678 iu_caller.iu_tpgt = iu32_caller.iu_tpgt; 3679 iu_caller.iu_len = iu32_caller.iu_len; 3680 iu_caller.iu_lun = iu32_caller.iu_lun; 3681 uscsi_cmd32touscsi_cmd((&iu32_caller.iu_ucmd), 3682 (&iu_caller.iu_ucmd)); 3683 3684 break; 3685 case DDI_MODEL_NONE: 3686 if (ddi_copyin((caddr_t)arg, &iu_caller, 3687 sizeof (iscsi_uscsi_t), mode)) { 3688 rtn = EFAULT; 3689 break; 3690 } 3691 break; 3692 default: 3693 ASSERT(FALSE); 3694 rtn = EINVAL; 3695 break; 3696 } 3697 #endif /* _MULTI_DATAMODEL */ 3698 3699 /* If failures earlier break */ 3700 if (rtn != 0) { 3701 break; 3702 } 3703 3704 /* copy from caller to internel cmd */ 3705 bcopy(&iu_caller, &iu, sizeof (iu)); 3706 3707 if (iu.iu_vers != ISCSI_INTERFACE_VERSION) { 3708 rtn = EINVAL; 3709 break; 3710 } 3711 /* 3712 * Check to see if oid references a target-param oid. If so, 3713 * find the associated session oid before getting lu list. 3714 */ 3715 if (iscsi_targetparam_get_name(iu.iu_oid) != NULL) { 3716 for (isp = ihp->hba_sess_list; isp; isp = 3717 isp->sess_next) { 3718 if (isp->sess_target_oid == iu.iu_oid) { 3719 target_oid = isp->sess_oid; 3720 break; 3721 } 3722 } 3723 } else { 3724 target_oid = iu.iu_oid; 3725 } 3726 3727 /* make sure we have a matching session for this command */ 3728 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER); 3729 rtn = iscsi_sess_get(target_oid, ihp, &isp); 3730 if (rtn != 0) { 3731 rtn = iscsi_sess_get_by_target(target_oid, ihp, 3732 &isp); 3733 if (rtn != 0) { 3734 rw_exit(&ihp->hba_sess_list_rwlock); 3735 rtn = EFAULT; 3736 break; 3737 } 3738 } 3739 /* 3740 * If a caller buffer is present allocate duplicate 3741 * kernel space and copyin caller memory. 3742 */ 3743 if (iu.iu_ucmd.uscsi_buflen > 0) { 3744 iu.iu_ucmd.uscsi_bufaddr = (caddr_t)kmem_alloc( 3745 iu.iu_ucmd.uscsi_buflen, KM_SLEEP); 3746 if (ddi_copyin(iu_caller.iu_ucmd.uscsi_bufaddr, 3747 iu.iu_ucmd.uscsi_bufaddr, 3748 iu.iu_ucmd.uscsi_buflen, mode)) { 3749 rw_exit(&ihp->hba_sess_list_rwlock); 3750 rtn = EFAULT; 3751 break; 3752 } 3753 } 3754 3755 /* 3756 * If a caller cdb is present allocate duplicate 3757 * kernel space and copyin caller memory. 3758 */ 3759 if (iu.iu_ucmd.uscsi_cdblen > 0) { 3760 iu.iu_ucmd.uscsi_cdb = (caddr_t)kmem_alloc( 3761 iu_caller.iu_ucmd.uscsi_cdblen, KM_SLEEP); 3762 if (ddi_copyin(iu_caller.iu_ucmd.uscsi_cdb, 3763 iu.iu_ucmd.uscsi_cdb, 3764 iu.iu_ucmd.uscsi_cdblen, mode)) { 3765 if (iu.iu_ucmd.uscsi_buflen > 0) { 3766 kmem_free(iu.iu_ucmd.uscsi_bufaddr, 3767 iu_caller.iu_ucmd.uscsi_buflen); 3768 } 3769 rw_exit(&ihp->hba_sess_list_rwlock); 3770 rtn = EFAULT; 3771 break; 3772 } 3773 } 3774 3775 /* 3776 * If a caller request sense is present allocate 3777 * duplicate kernel space. No need to copyin. 3778 */ 3779 if (iu.iu_ucmd.uscsi_rqlen > 0) { 3780 iu.iu_ucmd.uscsi_rqbuf = (caddr_t)kmem_alloc( 3781 iu.iu_ucmd.uscsi_rqlen, KM_SLEEP); 3782 } 3783 3784 /* issue passthru to io path handler */ 3785 rtn = iscsi_handle_passthru(isp, iu.iu_lun, &iu.iu_ucmd); 3786 if (rtn != 0) { 3787 rtn = EFAULT; 3788 } 3789 3790 /* 3791 * If the caller had a buf we need to do a copyout 3792 * and free the kernel memory 3793 */ 3794 if (iu.iu_ucmd.uscsi_buflen > 0) { 3795 if (ddi_copyout(iu.iu_ucmd.uscsi_bufaddr, 3796 iu_caller.iu_ucmd.uscsi_bufaddr, 3797 iu.iu_ucmd.uscsi_buflen, mode) != 0) { 3798 rtn = EFAULT; 3799 } 3800 kmem_free(iu.iu_ucmd.uscsi_bufaddr, 3801 iu.iu_ucmd.uscsi_buflen); 3802 } 3803 3804 /* We need to free kernel cdb, no need to copyout */ 3805 if (iu.iu_ucmd.uscsi_cdblen > 0) { 3806 kmem_free(iu.iu_ucmd.uscsi_cdb, 3807 iu.iu_ucmd.uscsi_cdblen); 3808 } 3809 3810 /* 3811 * If the caller had a request sense we need to 3812 * do a copyout and free the kernel memory 3813 */ 3814 if (iu.iu_ucmd.uscsi_rqlen > 0) { 3815 if (ddi_copyout(iu.iu_ucmd.uscsi_rqbuf, 3816 iu_caller.iu_ucmd.uscsi_rqbuf, 3817 iu.iu_ucmd.uscsi_rqlen, mode) != 0) { 3818 rtn = EFAULT; 3819 } 3820 kmem_free(iu.iu_ucmd.uscsi_rqbuf, 3821 iu.iu_ucmd.uscsi_rqlen); 3822 } 3823 3824 #ifdef _MULTI_DATAMODEL 3825 if (iu.iu_ucmd.uscsi_status != 0) { 3826 switch (model = ddi_model_convert_from( 3827 mode & FMODELS)) { 3828 case DDI_MODEL_ILP32: 3829 iu32_caller.iu_ucmd.uscsi_status = 3830 iu.iu_ucmd.uscsi_status; 3831 if (ddi_copyout((void *)&iu32_caller, 3832 (caddr_t)arg, sizeof (iscsi_uscsi32_t), 3833 mode) != 0) { 3834 rtn = EFAULT; 3835 } 3836 break; 3837 case DDI_MODEL_NONE: 3838 iu_caller.iu_ucmd.uscsi_status = 3839 iu.iu_ucmd.uscsi_status; 3840 if (ddi_copyout((void *)&iu_caller, 3841 (caddr_t)arg, sizeof (iscsi_uscsi_t), 3842 mode) != 0) { 3843 rtn = EFAULT; 3844 } 3845 break; 3846 default: 3847 ASSERT(FALSE); 3848 } 3849 } 3850 #endif /* _MULTI_DATAMODEL */ 3851 rw_exit(&ihp->hba_sess_list_rwlock); 3852 break; 3853 3854 case ISCSI_SMF_ONLINE: 3855 if (ddi_copyin((caddr_t)arg, &did, sizeof (int), mode) != 0) { 3856 rtn = EFAULT; 3857 break; 3858 } 3859 /* just a theoretical case */ 3860 if (ihp->hba_persistent_loaded == B_FALSE) { 3861 rtn = EFAULT; 3862 break; 3863 } 3864 3865 if (iscsi_enter_service_zone(ihp, ISCSI_SERVICE_ENABLED) == 3866 B_FALSE) { 3867 break; 3868 } 3869 3870 rval = iscsi_door_bind(did); 3871 if (rval == B_TRUE) { 3872 rval = iscsid_start(ihp); 3873 if (rval == B_FALSE) { 3874 iscsi_door_unbind(); 3875 } 3876 } 3877 3878 if (rval == B_TRUE) { 3879 iscsi_exit_service_zone(ihp, ISCSI_SERVICE_ENABLED); 3880 } else { 3881 iscsi_exit_service_zone(ihp, ISCSI_SERVICE_DISABLED); 3882 rtn = EFAULT; 3883 } 3884 3885 break; 3886 3887 case ISCSI_SMF_OFFLINE: 3888 if (iscsi_enter_service_zone(ihp, ISCSI_SERVICE_DISABLED) 3889 == B_FALSE) { 3890 break; 3891 } 3892 3893 rval = iscsid_stop(ihp); 3894 3895 if (rval == B_TRUE) { 3896 iscsi_exit_service_zone(ihp, ISCSI_SERVICE_DISABLED); 3897 iscsi_door_unbind(); 3898 } else { 3899 iscsi_exit_service_zone(ihp, ISCSI_SERVICE_ENABLED); 3900 rtn = EFAULT; 3901 } 3902 break; 3903 3904 case ISCSI_SMF_GET: 3905 mutex_enter(&ihp->hba_service_lock); 3906 while (ihp->hba_service_status == 3907 ISCSI_SERVICE_TRANSITION) { 3908 cv_wait(&ihp->hba_service_cv, 3909 &ihp->hba_service_lock); 3910 } 3911 if (ddi_copyout((void *)&ihp->hba_service_status, 3912 (caddr_t)arg, sizeof (boolean_t), mode) != 0) { 3913 rtn = EFAULT; 3914 } 3915 mutex_exit(&ihp->hba_service_lock); 3916 break; 3917 3918 case ISCSI_DISCOVERY_EVENTS: 3919 /* 3920 * If discovery has not been completed and not in progress, 3921 * poke the discovery methods 3922 */ 3923 mutex_enter(&ihp->hba_discovery_events_mutex); 3924 method = ihp->hba_discovery_events; 3925 if ((method != ISCSI_ALL_DISCOVERY_METHODS) && 3926 (ihp->hba_discovery_in_progress == B_FALSE)) { 3927 ihp->hba_discovery_in_progress = B_TRUE; 3928 mutex_exit(&ihp->hba_discovery_events_mutex); 3929 iscsid_poke_discovery(ihp, iSCSIDiscoveryMethodUnknown); 3930 mutex_enter(&ihp->hba_discovery_events_mutex); 3931 ihp->hba_discovery_in_progress = B_FALSE; 3932 method = ihp->hba_discovery_events; 3933 } 3934 mutex_exit(&ihp->hba_discovery_events_mutex); 3935 3936 if (ddi_copyout((void *)&method, (caddr_t)arg, 3937 sizeof (method), mode) != 0) 3938 rtn = EFAULT; 3939 break; 3940 3941 /* 3942 * ISCSI_SENDTGTS_GET -- 3943 */ 3944 case ISCSI_SENDTGTS_GET: 3945 stl_hdr = iscsi_ioctl_copyin((caddr_t)arg, mode, 3946 sizeof (*stl_hdr)); 3947 if (stl_hdr == NULL) { 3948 rtn = EFAULT; 3949 break; 3950 } 3951 3952 if (stl_hdr->stl_entry.e_vers != ISCSI_INTERFACE_VERSION) { 3953 rtn = EINVAL; 3954 kmem_free(stl_hdr, sizeof (*stl_hdr)); 3955 break; 3956 } 3957 3958 /* calculate how much memory user allocated for SendTgts */ 3959 stl_sz = sizeof (*stl_hdr); 3960 if (stl_hdr->stl_in_cnt > 0) { 3961 stl_sz += ((stl_hdr->stl_in_cnt - 1) * 3962 sizeof (iscsi_sendtgts_entry_t)); 3963 } 3964 3965 /* allocate local SendTgts list of the same size */ 3966 istl = kmem_zalloc(stl_sz, KM_SLEEP); 3967 bcopy(stl_hdr, istl, sizeof (*stl_hdr)); 3968 kmem_free(stl_hdr, sizeof (*stl_hdr)); 3969 3970 /* lock interface so only one SendTargets operation occurs */ 3971 sema_p(&ihp->hba_sendtgts_semaphore); 3972 3973 rtn = iscsi_ioctl_sendtgts_get(ihp, istl); 3974 3975 if (rtn == 0) { 3976 rtn = iscsi_ioctl_copyout(istl, stl_sz, 3977 (caddr_t)arg, mode); 3978 } 3979 3980 /* release lock to allow another SendTargets discovery */ 3981 sema_v(&ihp->hba_sendtgts_semaphore); 3982 3983 break; 3984 3985 /* 3986 * ISCSI_ISNS_SERVER_GET -- 3987 */ 3988 case ISCSI_ISNS_SERVER_GET: 3989 server_pg_list_hdr = iscsi_ioctl_copyin((caddr_t)arg, mode, 3990 sizeof (*server_pg_list_hdr)); 3991 if (server_pg_list_hdr == NULL) { 3992 rtn = EFAULT; 3993 break; 3994 } 3995 3996 /* If iSNS discovery mode is not set, return with zero entry */ 3997 method = persistent_disc_meth_get(); 3998 if ((method & iSCSIDiscoveryMethodISNS) == 0) { 3999 kmem_free(server_pg_list_hdr, 4000 sizeof (*server_pg_list_hdr)); 4001 server_pg_list_hdr = NULL; 4002 rtn = EACCES; 4003 break; 4004 } 4005 4006 initiator_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP); 4007 if (persistent_initiator_name_get(initiator_node_name, 4008 ISCSI_MAX_NAME_LEN) != B_TRUE) { 4009 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 4010 initiator_node_name = NULL; 4011 kmem_free(server_pg_list_hdr, 4012 sizeof (*server_pg_list_hdr)); 4013 server_pg_list_hdr = NULL; 4014 rtn = EIO; 4015 break; 4016 } 4017 if (strlen(initiator_node_name) == 0) { 4018 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 4019 initiator_node_name = NULL; 4020 kmem_free(server_pg_list_hdr, 4021 sizeof (*server_pg_list_hdr)); 4022 server_pg_list_hdr = NULL; 4023 rtn = EIO; 4024 break; 4025 } 4026 4027 initiator_node_alias = kmem_zalloc( 4028 ISCSI_MAX_NAME_LEN, KM_SLEEP); 4029 if (persistent_alias_name_get(initiator_node_alias, 4030 ISCSI_MAX_NAME_LEN) != B_TRUE) { 4031 initiator_node_alias[0] = '\0'; 4032 } 4033 rtn = isns_query_one_server(&(server_pg_list_hdr->addr), 4034 ihp->hba_isid, 4035 (uint8_t *)initiator_node_name, 4036 (uint8_t *)initiator_node_alias, 4037 ISNS_INITIATOR_NODE_TYPE, 4038 &pg_list); 4039 if (rtn != isns_ok || pg_list == NULL) { 4040 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 4041 initiator_node_name = NULL; 4042 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN); 4043 initiator_node_alias = NULL; 4044 kmem_free(server_pg_list_hdr, 4045 sizeof (*server_pg_list_hdr)); 4046 server_pg_list_hdr = NULL; 4047 rtn = EIO; 4048 break; 4049 } 4050 4051 /* 4052 * pg_list_sz is the size of the pg_list returned from the 4053 * isns_query_all 4054 * 4055 * pg_sz_copy_out is the size of the pg_list we are going to 4056 * return back to the caller 4057 * 4058 * server_pg_list_sz is total amount of data we are returning 4059 * back to the caller 4060 */ 4061 pg_list->pg_in_cnt = 4062 server_pg_list_hdr->addr_port_list.pg_in_cnt; 4063 pg_list_sz = sizeof (isns_portal_group_list_t); 4064 if (pg_list->pg_out_cnt > 0) { 4065 pg_list_sz += (pg_list->pg_out_cnt - 1) * 4066 sizeof (isns_portal_group_t); 4067 } 4068 /* 4069 * check if caller passed in a buffer with enough space 4070 * if there isn't enough space, fill the caller's buffer with 4071 * as much information as possible. 4072 * 4073 * if pg_out_cnt > pg_in_cnt, pg_out_cnt will be returned with 4074 * the total number of targets found 4075 * 4076 * if pg_out_cnt < pg_in_cnt, pg_out_cnt will be the number 4077 * of targets returned 4078 */ 4079 if (pg_list->pg_in_cnt < pg_list->pg_out_cnt) { 4080 pg_sz_copy_out = sizeof (isns_portal_group_list_t); 4081 if (pg_list->pg_in_cnt > 0) { 4082 pg_sz_copy_out += (pg_list->pg_in_cnt - 1) * 4083 sizeof (isns_portal_group_t); 4084 } 4085 server_pg_list_sz = 4086 sizeof (isns_server_portal_group_list_t); 4087 if (pg_list->pg_in_cnt > 0) { 4088 server_pg_list_sz += (pg_list->pg_in_cnt - 1) * 4089 sizeof (isns_portal_group_t); 4090 } 4091 } else { 4092 pg_sz_copy_out = pg_list_sz; 4093 server_pg_list_sz = 4094 sizeof (isns_server_portal_group_list_t); 4095 if (pg_list->pg_out_cnt > 0) { 4096 server_pg_list_sz += (pg_list->pg_out_cnt - 1) * 4097 sizeof (isns_portal_group_t); 4098 } 4099 } 4100 4101 server_pg_list = (isns_server_portal_group_list_t *)kmem_zalloc( 4102 server_pg_list_sz, KM_SLEEP); 4103 4104 bcopy(&(server_pg_list_hdr->addr), &(server_pg_list->addr), 4105 sizeof (server_pg_list->addr)); 4106 bcopy(pg_list, &server_pg_list->addr_port_list, pg_sz_copy_out); 4107 4108 if (ddi_copyout(server_pg_list, (caddr_t)arg, server_pg_list_sz, 4109 mode) != 0) { 4110 rtn = EFAULT; 4111 } 4112 DTRACE_PROBE1(iscsi_ioctl_iscsi_isns_server_get_pg_sz, 4113 int, pg_list_sz); 4114 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN); 4115 initiator_node_name = NULL; 4116 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN); 4117 initiator_node_alias = NULL; 4118 kmem_free(pg_list, pg_list_sz); 4119 pg_list = NULL; 4120 kmem_free(server_pg_list, server_pg_list_sz); 4121 server_pg_list = NULL; 4122 kmem_free(server_pg_list_hdr, sizeof (*server_pg_list_hdr)); 4123 server_pg_list_hdr = NULL; 4124 break; 4125 4126 /* 4127 * ISCSI_GET_CONFIG_SESSIONS -- 4128 */ 4129 case ISCSI_GET_CONFIG_SESSIONS: 4130 /* FALLTHRU */ 4131 4132 case ISCSI_SET_CONFIG_SESSIONS: 4133 size = sizeof (*ics); 4134 ics = iscsi_ioctl_copyin((caddr_t)arg, mode, size); 4135 if (ics == NULL) { 4136 rtn = EFAULT; 4137 break; 4138 } 4139 4140 /* verify version infomration */ 4141 if (ics->ics_ver != ISCSI_INTERFACE_VERSION) { 4142 rtn = EINVAL; 4143 kmem_free(ics, size); 4144 ics = NULL; 4145 break; 4146 } 4147 4148 /* Check to see if we need to copy in more memory */ 4149 if (ics->ics_in > 1) { 4150 /* record correct size */ 4151 size = ISCSI_SESSION_CONFIG_SIZE(ics->ics_in); 4152 /* free old buffer */ 4153 kmem_free(ics, sizeof (*ics)); 4154 4155 /* copy in complete buffer size */ 4156 ics = iscsi_ioctl_copyin((caddr_t)arg, mode, size); 4157 if (ics == NULL) { 4158 rtn = EFAULT; 4159 break; 4160 } 4161 } 4162 4163 /* switch action based on get or set */ 4164 if (cmd == ISCSI_GET_CONFIG_SESSIONS) { 4165 /* get */ 4166 rtn = iscsi_ioctl_get_config_sess(ihp, ics); 4167 if (rtn == 0) { 4168 /* copyout data for gets */ 4169 rtn = iscsi_ioctl_copyout(ics, size, 4170 (caddr_t)arg, mode); 4171 } else { 4172 kmem_free(ics, size); 4173 ics = NULL; 4174 } 4175 } else { 4176 /* set */ 4177 rtn = iscsi_ioctl_set_config_sess(ihp, ics); 4178 if (iscsiboot_prop) { 4179 if (iscsi_cmp_boot_sess_oid(ihp, 4180 ics->ics_oid)) { 4181 /* 4182 * found active session for this object 4183 * or this is initiator object 4184 * with mpxio enabled 4185 */ 4186 if (!iscsi_reconfig_boot_sess(ihp)) { 4187 kmem_free(ics, size); 4188 ics = NULL; 4189 rtn = EINVAL; 4190 break; 4191 } 4192 } 4193 } 4194 kmem_free(ics, size); 4195 ics = NULL; 4196 } 4197 break; 4198 4199 case ISCSI_IS_ACTIVE: 4200 /* 4201 * dhcpagent calls here to check if there are 4202 * active iSCSI sessions 4203 */ 4204 instance = 0; 4205 if (iscsiboot_prop) { 4206 instance = 1; 4207 } 4208 if (!instance) { 4209 rw_enter(&ihp->hba_sess_list_rwlock, 4210 RW_READER); 4211 for (isp = ihp->hba_sess_list; isp; 4212 isp = isp->sess_next) { 4213 if ((isp->sess_state == 4214 ISCSI_SESS_STATE_LOGGED_IN) && 4215 (isp->sess_lun_list != 4216 NULL)) { 4217 instance = 1; 4218 break; 4219 } 4220 } 4221 rw_exit(&ihp->hba_sess_list_rwlock); 4222 } 4223 size = sizeof (instance); 4224 if (ddi_copyout(&instance, (caddr_t)arg, size, 4225 mode) != 0) { 4226 rtn = EFAULT; 4227 } 4228 break; 4229 4230 case ISCSI_BOOTPROP_GET: 4231 size = sizeof (*bootProp); 4232 bootProp = iscsi_ioctl_copyin((caddr_t)arg, mode, size); 4233 if (bootProp == NULL) { 4234 rtn = EFAULT; 4235 break; 4236 } 4237 bootProp->hba_mpxio_enabled = 4238 iscsi_chk_bootlun_mpxio(ihp); 4239 if (iscsiboot_prop == NULL) { 4240 bootProp->iscsiboot = 0; 4241 rtn = iscsi_ioctl_copyout(bootProp, size, 4242 (caddr_t)arg, mode); 4243 break; 4244 } else { 4245 bootProp->iscsiboot = 1; 4246 } 4247 4248 if (iscsiboot_prop->boot_init.ini_name != NULL) { 4249 (void) strncpy((char *)bootProp->ini_name.n_name, 4250 (char *)iscsiboot_prop->boot_init.ini_name, 4251 ISCSI_MAX_NAME_LEN); 4252 } 4253 if (iscsiboot_prop->boot_init.ini_chap_name != NULL) { 4254 bootProp->auth.a_auth_method = authMethodCHAP; 4255 (void) strncpy((char *)bootProp->ini_chap.c_user, 4256 (char *)iscsiboot_prop->boot_init.ini_chap_name, 4257 ISCSI_MAX_NAME_LEN); 4258 (void) strncpy((char *)bootProp->ini_chap.c_secret, 4259 (char *)iscsiboot_prop->boot_init.ini_chap_sec, 4260 ISCSI_CHAP_SECRET_LEN); 4261 if (iscsiboot_prop->boot_tgt.tgt_chap_name != 4262 NULL) { 4263 bootProp->auth.a_bi_auth = B_TRUE; 4264 } else { 4265 bootProp->auth.a_bi_auth = B_FALSE; 4266 } 4267 } 4268 if (iscsiboot_prop->boot_tgt.tgt_name != NULL) { 4269 (void) strncpy((char *)bootProp->tgt_name.n_name, 4270 (char *)iscsiboot_prop->boot_tgt.tgt_name, 4271 ISCSI_MAX_NAME_LEN); 4272 } 4273 if (iscsiboot_prop->boot_tgt.tgt_chap_name != NULL) { 4274 (void) strncpy((char *)bootProp->tgt_chap.c_user, 4275 (char *)iscsiboot_prop->boot_tgt.tgt_chap_name, 4276 ISCSI_MAX_NAME_LEN); 4277 (void) strncpy((char *)bootProp->tgt_chap.c_secret, 4278 (char *)iscsiboot_prop->boot_tgt.tgt_chap_sec, 4279 ISCSI_CHAP_SECRET_LEN); 4280 } 4281 4282 rtn = iscsi_ioctl_copyout(bootProp, size, (caddr_t)arg, mode); 4283 break; 4284 4285 default: 4286 rtn = ENOTTY; 4287 cmn_err(CE_NOTE, "unrecognized ioctl 0x%x", cmd); 4288 } /* end of ioctl type switch/cases */ 4289 4290 if ((cmd != ISCSI_SMF_ONLINE) && (cmd != ISCSI_SMF_OFFLINE) && 4291 (cmd != ISCSI_SMF_GET)) { 4292 /* other cmds need to release the service */ 4293 iscsi_client_release_service(ihp); 4294 } 4295 4296 return (rtn); 4297 } 4298 4299 /* 4300 * +--------------------------------------------------------------------+ 4301 * | End of cb_ops routines | 4302 * +--------------------------------------------------------------------+ 4303 */ 4304 4305 4306 /* 4307 * +--------------------------------------------------------------------+ 4308 * | Common scsi_tran support routines | 4309 * +--------------------------------------------------------------------+ 4310 */ 4311 4312 /* 4313 * iscsi_i_commoncap -- SCSA host adapter get/set capability routines. 4314 * 4315 * Need to determine if any of these can be determined through the iSCSI 4316 * protocol. For now just return error on most. 4317 */ 4318 /* ARGSUSED */ 4319 static int 4320 iscsi_i_commoncap(struct scsi_address *ap, char *cap, int val, 4321 int tgtonly, int doset) 4322 { 4323 int rtn; 4324 int cidx; 4325 iscsi_lun_t *ilp; 4326 4327 ASSERT((ap)->a_hba_tran->tran_hba_private != NULL); 4328 ilp = (iscsi_lun_t *)((ap)->a_hba_tran->tran_tgt_private); 4329 ASSERT(ilp != NULL); 4330 4331 if (cap == (char *)0) { 4332 return (FALSE); 4333 } 4334 4335 cidx = scsi_hba_lookup_capstr(cap); 4336 if (cidx == -1) { 4337 return (cidx); 4338 } 4339 4340 /* 4341 * Process setcap request. 4342 */ 4343 if (doset) { 4344 /* 4345 * At present, we can only set binary (0/1) values 4346 */ 4347 switch (cidx) { 4348 case SCSI_CAP_LUN_RESET: 4349 if (val) { 4350 ilp->lun_cap |= ISCSI_LUN_CAP_RESET; 4351 } else { 4352 ilp->lun_cap &= ~ISCSI_LUN_CAP_RESET; 4353 } 4354 rtn = TRUE; 4355 break; 4356 default: 4357 /* 4358 * None of these are settable via 4359 * the capability interface. 4360 */ 4361 rtn = FALSE; 4362 break; 4363 } 4364 4365 /* 4366 * Process getcap request. 4367 */ 4368 } else { 4369 switch (cidx) { 4370 case SCSI_CAP_DMA_MAX: 4371 /* no DMA, Psuedo value */ 4372 rtn = INT32_MAX; 4373 break; 4374 case SCSI_CAP_INITIATOR_ID: 4375 rtn = 7; 4376 break; 4377 case SCSI_CAP_ARQ: 4378 case SCSI_CAP_RESET_NOTIFICATION: 4379 case SCSI_CAP_TAGGED_QING: 4380 rtn = TRUE; 4381 break; 4382 case SCSI_CAP_SCSI_VERSION: 4383 rtn = SCSI_VERSION_3; 4384 break; 4385 case SCSI_CAP_INTERCONNECT_TYPE: 4386 rtn = INTERCONNECT_FABRIC; 4387 break; 4388 case SCSI_CAP_LUN_RESET: 4389 rtn = ((ilp->lun_cap & ISCSI_LUN_CAP_RESET) != 0) ? 4390 TRUE : FALSE; 4391 break; 4392 case SCSI_CAP_CDB_LEN: 4393 /* 4394 * iSCSI RFC 3720 defines a default 16 byte 4395 * CDB as part of the Basic Header Segment 4396 * (BHS) (10.2.1) and allows for an Additional 4397 * Header Segment (AHS) Length of 255 * 4 4398 * (10.2.1.5). The AHS length can be used 4399 * for different purposes two of which are 4400 * Extended CDB ADS (10.2.2.3) and Bidirectional 4401 * Expected Read-Data Length AHS (10.2.2.4). 4402 * The largest header of these consumes is 4403 * 32 bytes. So the total Max CDB Length is 4404 * 16 + ((255 * 4 ) - 32) = 1004. 4405 */ 4406 rtn = 1004; 4407 break; 4408 default: 4409 rtn = UNDEFINED; 4410 break; 4411 } 4412 } 4413 return (rtn); 4414 } 4415 4416 /* 4417 * iscsi_virt_lun_init - attempts to complete a mdi/scsi_vhci binding 4418 * 4419 * This routine is used to associate the tran_tgt_private to our ilp 4420 * structure. This function is indirectly called from our 4421 * iscsi_lun_create_xxx routines. These routines must prevent 4422 * the session and lun lists from changing during this call. 4423 */ 4424 /* ARGSUSED */ 4425 static int 4426 iscsi_virt_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 4427 scsi_hba_tran_t *hba_tran, struct scsi_device *sd) 4428 { 4429 iscsi_lun_t *ilp = NULL; 4430 iscsi_lun_t *ilp_check = NULL; 4431 iscsi_sess_t *isp = NULL; 4432 char *lun_guid = NULL; 4433 mdi_pathinfo_t *pip = NULL; 4434 iscsi_hba_t *ihp = (iscsi_hba_t *)hba_tran->tran_hba_private; 4435 char target_port_name[MAX_NAME_PROP_SIZE]; 4436 4437 /* 4438 * Here's a nice little piece of undocumented stuff. 4439 */ 4440 if ((pip = (mdi_pathinfo_t *)sd->sd_private) == NULL) { 4441 /* 4442 * Very bad news if this occurs. Somehow SCSI_vhci has 4443 * lost the pathinfo node for this target. 4444 */ 4445 return (DDI_NOT_WELL_FORMED); 4446 } 4447 4448 ilp = (iscsi_lun_t *)mdi_pi_get_phci_private(pip); 4449 4450 /* 4451 * +----------------------------------------------------+ 4452 * | Looking to find the target device via the property | 4453 * | is not required since the driver can easily get | 4454 * | this information from the mdi_phci_get_private() | 4455 * | call above. This is just a consistency check | 4456 * | which can be removed. | 4457 */ 4458 if (mdi_prop_lookup_string(pip, MDI_GUID, &lun_guid) != 4459 DDI_PROP_SUCCESS) { 4460 return (DDI_NOT_WELL_FORMED); 4461 } 4462 4463 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) { 4464 4465 /* If this isn't the matching session continue */ 4466 if (ilp->lun_sess != isp) { 4467 continue; 4468 } 4469 4470 /* 4471 * We are already holding the lun list rwlock 4472 * for this thread on the callers side of mdi_pi_online 4473 * or ndi_devi_online. Which lead to this functions 4474 * call. 4475 */ 4476 for (ilp_check = isp->sess_lun_list; ilp_check; 4477 ilp_check = ilp_check->lun_next) { 4478 4479 /* 4480 * If this is the matching LUN and contains 4481 * the same LUN GUID then break we found our 4482 * match. 4483 */ 4484 if ((ilp == ilp_check) && 4485 (strcmp(lun_guid, ilp_check->lun_guid) == 0)) { 4486 break; 4487 } 4488 } 4489 if (ilp_check != NULL) { 4490 break; 4491 } 4492 } 4493 4494 /* 4495 * Free resource that's no longer required. 4496 */ 4497 if (lun_guid != NULL) 4498 (void) mdi_prop_free(lun_guid); 4499 4500 if (ilp_check == NULL) { 4501 /* 4502 * Failed to find iSCSI LUN in HBA chain based 4503 * on the GUID that was stored as a property on 4504 * the pathinfo node. 4505 */ 4506 return (DDI_NOT_WELL_FORMED); 4507 } 4508 4509 if (ilp != ilp_check) { 4510 /* 4511 * The iSCSI target that we found on the HBA link is 4512 * different than the iSCSI target that was stored as 4513 * private data on the pathinfo node. 4514 */ 4515 return (DDI_NOT_WELL_FORMED); 4516 } 4517 /* 4518 * | End of consistency check | 4519 * +----------------------------------------------------+ 4520 */ 4521 4522 hba_tran->tran_tgt_private = ilp; 4523 4524 target_port_name[0] = '\0'; 4525 if (ilp->lun_sess->sess_tpgt_conf == ISCSI_DEFAULT_TPGT) { 4526 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE, 4527 "%02x%02x%02x%02x%02x%02x,%s", 4528 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1], 4529 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3], 4530 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5], 4531 ilp->lun_sess->sess_name); 4532 } else { 4533 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE, 4534 "%02x%02x%02x%02x%02x%02x,%s,%d", 4535 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1], 4536 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3], 4537 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5], 4538 ilp->lun_sess->sess_name, ilp->lun_sess->sess_tpgt_conf); 4539 } 4540 4541 if (mdi_prop_update_string(pip, "target-port", 4542 target_port_name) != DDI_PROP_SUCCESS) { 4543 cmn_err(CE_WARN, "iscsi_virt_lun_init: Creating 'target-port' " 4544 "property on Path(%p) for Target(%s), Lun(%d) Failed", 4545 (void *)pip, ilp->lun_sess->sess_name, ilp->lun_num); 4546 } 4547 4548 return (DDI_SUCCESS); 4549 } 4550 4551 /* 4552 * iscsi_phys_lun_init - attempts to complete a ndi binding 4553 * 4554 * This routine is used to associate the tran_tgt_private to our 4555 * ilp structure. This function is indirectly called from our 4556 * iscsi_lun_create_xxx routines. These routines must prevent 4557 * the session and lun lists from changing during this call. 4558 */ 4559 static int 4560 iscsi_phys_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip, 4561 scsi_hba_tran_t *hba_tran, struct scsi_device *sd) 4562 { 4563 int rtn = DDI_SUCCESS; 4564 iscsi_hba_t *ihp = NULL; 4565 iscsi_sess_t *isp = NULL; 4566 iscsi_lun_t *ilp = NULL; 4567 char target_port_name[MAX_NAME_PROP_SIZE]; 4568 int *words = NULL; 4569 uint_t nwords = 0; 4570 4571 ASSERT(hba_dip); 4572 ASSERT(lun_dip); 4573 ASSERT(hba_tran); 4574 ASSERT(sd); 4575 ihp = (iscsi_hba_t *)hba_tran->tran_hba_private; 4576 ASSERT(ihp); 4577 4578 if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, lun_dip, 4579 DDI_PROP_DONTPASS, LUN_PROP, &words, &nwords) != DDI_PROP_SUCCESS) { 4580 cmn_err(CE_WARN, "iscsi_phys_lun_init: Returning DDI_FAILURE:" 4581 "lun for %s (instance %d)", ddi_get_name(lun_dip), 4582 ddi_get_instance(lun_dip)); 4583 return (DDI_FAILURE); 4584 } 4585 4586 if (nwords == 0) { 4587 ddi_prop_free(words); 4588 return (DDI_FAILURE); 4589 } 4590 4591 ASSERT(words != NULL); 4592 4593 /* See if we already created this session */ 4594 4595 /* Walk the HBA's session list */ 4596 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) { 4597 /* compare target name as the unique identifier */ 4598 if (sd->sd_address.a_target == isp->sess_oid) { 4599 /* found match */ 4600 break; 4601 } 4602 } 4603 4604 /* If we found matching session continue searching for tgt */ 4605 if (isp != NULL) { 4606 /* 4607 * Search for the matching iscsi lun structure. We don't 4608 * need to hold the READER for the lun list at this point. 4609 * because the tran_get_name is being called from the online 4610 * function which is already holding a reader on the lun 4611 * list. 4612 */ 4613 for (ilp = isp->sess_lun_list; ilp; ilp = ilp->lun_next) { 4614 if (*words == ilp->lun_num) { 4615 /* found match */ 4616 break; 4617 } 4618 } 4619 4620 if (ilp != NULL) { 4621 /* 4622 * tgt found path it to the tran_lun_private 4623 * this is used later for fast access on 4624 * init_pkt and start 4625 */ 4626 hba_tran->tran_tgt_private = ilp; 4627 } else { 4628 /* tgt not found */ 4629 ddi_prop_free(words); 4630 return (DDI_FAILURE); 4631 } 4632 } else { 4633 /* sess not found */ 4634 ddi_prop_free(words); 4635 return (DDI_FAILURE); 4636 } 4637 ddi_prop_free(words); 4638 4639 target_port_name[0] = '\0'; 4640 if (ilp->lun_sess->sess_tpgt_conf == ISCSI_DEFAULT_TPGT) { 4641 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE, 4642 "%02x%02x%02x%02x%02x%02x,%s", 4643 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1], 4644 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3], 4645 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5], 4646 ilp->lun_sess->sess_name); 4647 } else { 4648 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE, 4649 "%02x%02x%02x%02x%02x%02x,%s,%d", 4650 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1], 4651 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3], 4652 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5], 4653 ilp->lun_sess->sess_name, ilp->lun_sess->sess_tpgt_conf); 4654 } 4655 4656 if (ddi_prop_update_string(DDI_DEV_T_NONE, lun_dip, 4657 "target-port", target_port_name) != DDI_PROP_SUCCESS) { 4658 cmn_err(CE_WARN, "iscsi_phys_lun_init: Creating 'target-port' " 4659 "property on Target(%s), Lun(%d) Failed", 4660 ilp->lun_sess->sess_name, ilp->lun_num); 4661 } 4662 4663 return (rtn); 4664 } 4665 4666 /* 4667 * +--------------------------------------------------------------------+ 4668 * | End of scsi_tran support routines | 4669 * +--------------------------------------------------------------------+ 4670 */ 4671 4672 /* 4673 * +--------------------------------------------------------------------+ 4674 * | Begin of struct utility routines | 4675 * +--------------------------------------------------------------------+ 4676 */ 4677 4678 4679 /* 4680 * iscsi_set_default_login_params - This function sets the 4681 * driver default login params. This is using during the 4682 * creation of our iSCSI HBA structure initialization by 4683 * could be used at other times to reset back to the defaults. 4684 */ 4685 void 4686 iscsi_set_default_login_params(iscsi_login_params_t *params) 4687 { 4688 params->immediate_data = ISCSI_DEFAULT_IMMEDIATE_DATA; 4689 params->initial_r2t = ISCSI_DEFAULT_INITIALR2T; 4690 params->first_burst_length = ISCSI_DEFAULT_FIRST_BURST_LENGTH; 4691 params->max_burst_length = ISCSI_DEFAULT_MAX_BURST_LENGTH; 4692 params->data_pdu_in_order = ISCSI_DEFAULT_DATA_PDU_IN_ORDER; 4693 params->data_sequence_in_order = ISCSI_DEFAULT_DATA_SEQUENCE_IN_ORDER; 4694 params->default_time_to_wait = ISCSI_DEFAULT_TIME_TO_WAIT; 4695 params->default_time_to_retain = ISCSI_DEFAULT_TIME_TO_RETAIN; 4696 params->header_digest = ISCSI_DEFAULT_HEADER_DIGEST; 4697 params->data_digest = ISCSI_DEFAULT_DATA_DIGEST; 4698 params->max_recv_data_seg_len = ISCSI_DEFAULT_MAX_RECV_SEG_LEN; 4699 params->max_xmit_data_seg_len = ISCSI_DEFAULT_MAX_XMIT_SEG_LEN; 4700 params->max_connections = ISCSI_DEFAULT_MAX_CONNECTIONS; 4701 params->max_outstanding_r2t = ISCSI_DEFAULT_MAX_OUT_R2T; 4702 params->error_recovery_level = ISCSI_DEFAULT_ERROR_RECOVERY_LEVEL; 4703 params->ifmarker = ISCSI_DEFAULT_IFMARKER; 4704 params->ofmarker = ISCSI_DEFAULT_OFMARKER; 4705 } 4706 4707 4708 /* 4709 * +--------------------------------------------------------------------+ 4710 * | End of struct utility routines | 4711 * +--------------------------------------------------------------------+ 4712 */ 4713 4714 /* 4715 * +--------------------------------------------------------------------+ 4716 * | Begin of ioctl utility routines | 4717 * +--------------------------------------------------------------------+ 4718 */ 4719 4720 /* 4721 * iscsi_get_param - This function is a helper to ISCSI_GET_PARAM 4722 * IOCTL 4723 */ 4724 int 4725 iscsi_get_param(iscsi_login_params_t *params, boolean_t valid_flag, 4726 iscsi_param_get_t *ipgp) { 4727 int rtn = 0; 4728 4729 /* ---- Default to settable, possibly changed later ---- */ 4730 ipgp->g_value.v_valid = valid_flag; 4731 ipgp->g_value.v_settable = B_TRUE; 4732 4733 switch (ipgp->g_param) { 4734 /* 4735 * Boolean parameters 4736 */ 4737 case ISCSI_LOGIN_PARAM_DATA_SEQUENCE_IN_ORDER: 4738 ipgp->g_value.v_bool.b_current = 4739 params->data_sequence_in_order; 4740 ipgp->g_value.v_bool.b_default = 4741 ISCSI_DEFAULT_DATA_SEQUENCE_IN_ORDER; 4742 break; 4743 case ISCSI_LOGIN_PARAM_IMMEDIATE_DATA: 4744 ipgp->g_value.v_bool.b_current = 4745 params->immediate_data; 4746 ipgp->g_value.v_bool.b_default = 4747 ISCSI_DEFAULT_IMMEDIATE_DATA; 4748 break; 4749 case ISCSI_LOGIN_PARAM_INITIAL_R2T: 4750 ipgp->g_value.v_bool.b_current = 4751 params->initial_r2t; 4752 ipgp->g_value.v_bool.b_default = 4753 ISCSI_DEFAULT_IMMEDIATE_DATA; 4754 break; 4755 case ISCSI_LOGIN_PARAM_DATA_PDU_IN_ORDER: 4756 ipgp->g_value.v_bool.b_current = 4757 params->data_pdu_in_order; 4758 ipgp->g_value.v_bool.b_default = 4759 ISCSI_DEFAULT_DATA_PDU_IN_ORDER; 4760 break; 4761 4762 /* 4763 * Integer parameters 4764 */ 4765 case ISCSI_LOGIN_PARAM_HEADER_DIGEST: 4766 ipgp->g_value.v_integer.i_current = params->header_digest; 4767 ipgp->g_value.v_integer.i_default = ISCSI_DEFAULT_HEADER_DIGEST; 4768 ipgp->g_value.v_integer.i_min = 0; 4769 ipgp->g_value.v_integer.i_max = ISCSI_MAX_HEADER_DIGEST; 4770 ipgp->g_value.v_integer.i_incr = 1; 4771 break; 4772 case ISCSI_LOGIN_PARAM_DATA_DIGEST: 4773 ipgp->g_value.v_integer.i_current = params->data_digest; 4774 ipgp->g_value.v_integer.i_default = ISCSI_DEFAULT_DATA_DIGEST; 4775 ipgp->g_value.v_integer.i_min = 0; 4776 ipgp->g_value.v_integer.i_max = ISCSI_MAX_DATA_DIGEST; 4777 ipgp->g_value.v_integer.i_incr = 1; 4778 break; 4779 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_RETAIN: 4780 ipgp->g_value.v_integer.i_current = 4781 params->default_time_to_retain; 4782 ipgp->g_value.v_integer.i_default = 4783 ISCSI_DEFAULT_TIME_TO_RETAIN; 4784 ipgp->g_value.v_integer.i_min = 0; 4785 ipgp->g_value.v_integer.i_max = ISCSI_MAX_TIME2RETAIN; 4786 ipgp->g_value.v_integer.i_incr = 1; 4787 break; 4788 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_WAIT: 4789 ipgp->g_value.v_integer.i_current = 4790 params->default_time_to_wait; 4791 ipgp->g_value.v_integer.i_default = 4792 ISCSI_DEFAULT_TIME_TO_WAIT; 4793 ipgp->g_value.v_integer.i_min = 0; 4794 ipgp->g_value.v_integer.i_max = ISCSI_MAX_TIME2WAIT; 4795 ipgp->g_value.v_integer.i_incr = 1; 4796 break; 4797 case ISCSI_LOGIN_PARAM_ERROR_RECOVERY_LEVEL: 4798 ipgp->g_value.v_integer.i_current = 4799 params->error_recovery_level; 4800 ipgp->g_value.v_integer.i_default = 4801 ISCSI_DEFAULT_ERROR_RECOVERY_LEVEL; 4802 ipgp->g_value.v_integer.i_min = 0; 4803 ipgp->g_value.v_integer.i_max = ISCSI_MAX_ERROR_RECOVERY_LEVEL; 4804 ipgp->g_value.v_integer.i_incr = 1; 4805 ipgp->g_value.v_settable = B_FALSE; 4806 break; 4807 case ISCSI_LOGIN_PARAM_FIRST_BURST_LENGTH: 4808 ipgp->g_value.v_integer.i_current = 4809 params->first_burst_length; 4810 ipgp->g_value.v_integer.i_default = 4811 ISCSI_DEFAULT_FIRST_BURST_LENGTH; 4812 ipgp->g_value.v_integer.i_min = 512; 4813 ipgp->g_value.v_integer.i_max = ISCSI_MAX_FIRST_BURST_LENGTH; 4814 ipgp->g_value.v_integer.i_incr = 1; 4815 break; 4816 case ISCSI_LOGIN_PARAM_MAX_BURST_LENGTH: 4817 ipgp->g_value.v_integer.i_current = 4818 params->max_burst_length; 4819 ipgp->g_value.v_integer.i_default = 4820 ISCSI_DEFAULT_MAX_BURST_LENGTH; 4821 ipgp->g_value.v_integer.i_min = 512; 4822 ipgp->g_value.v_integer.i_max = ISCSI_MAX_BURST_LENGTH; 4823 ipgp->g_value.v_integer.i_incr = 1; 4824 break; 4825 case ISCSI_LOGIN_PARAM_MAX_CONNECTIONS: 4826 ipgp->g_value.v_integer.i_current = 4827 params->max_connections; 4828 ipgp->g_value.v_settable = B_FALSE; 4829 ipgp->g_value.v_integer.i_default = 4830 ISCSI_DEFAULT_MAX_CONNECTIONS; 4831 ipgp->g_value.v_integer.i_min = 1; 4832 ipgp->g_value.v_integer.i_max = ISCSI_MAX_CONNECTIONS; 4833 ipgp->g_value.v_integer.i_incr = 1; 4834 break; 4835 case ISCSI_LOGIN_PARAM_OUTSTANDING_R2T: 4836 ipgp->g_value.v_integer.i_current = 4837 params->max_outstanding_r2t; 4838 ipgp->g_value.v_settable = B_FALSE; 4839 ipgp->g_value.v_integer.i_default = 4840 ISCSI_DEFAULT_MAX_OUT_R2T; 4841 ipgp->g_value.v_integer.i_min = 1; 4842 ipgp->g_value.v_integer.i_max = ISCSI_MAX_OUTSTANDING_R2T; 4843 ipgp->g_value.v_integer.i_incr = 1; 4844 break; 4845 case ISCSI_LOGIN_PARAM_MAX_RECV_DATA_SEGMENT_LENGTH: 4846 ipgp->g_value.v_integer.i_current = 4847 params->max_recv_data_seg_len; 4848 ipgp->g_value.v_integer.i_default = 4849 ISCSI_DEFAULT_MAX_RECV_SEG_LEN; 4850 ipgp->g_value.v_integer.i_min = 512; 4851 ipgp->g_value.v_integer.i_max = 4852 ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH; 4853 ipgp->g_value.v_integer.i_incr = 1; 4854 break; 4855 default: 4856 rtn = EINVAL; 4857 } 4858 4859 return (rtn); 4860 } 4861 4862 /* 4863 * +--------------------------------------------------------------------+ 4864 * | End of ioctl utility routines | 4865 * +--------------------------------------------------------------------+ 4866 */ 4867 4868 /* 4869 * iscsi_get_name_from_iqn - Translates a normal iqn/eui into a 4870 * IEEE safe address. IEEE addresses have a number of characters 4871 * set aside as reserved. 4872 */ 4873 static void 4874 iscsi_get_name_from_iqn(char *name, int name_max_len) 4875 { 4876 char *tmp = NULL; 4877 char *oldch = NULL; 4878 char *newch = NULL; 4879 4880 tmp = kmem_zalloc(MAX_GET_NAME_SIZE, KM_SLEEP); 4881 4882 for (oldch = &name[0], newch = &tmp[0]; *oldch != '\0'; 4883 oldch++, newch++) { 4884 switch (*oldch) { 4885 case ':': 4886 *newch++ = '%'; 4887 *newch++ = '3'; 4888 *newch = 'A'; 4889 break; 4890 case ' ': 4891 *newch++ = '%'; 4892 *newch++ = '2'; 4893 *newch = '0'; 4894 break; 4895 case '@': 4896 *newch++ = '%'; 4897 *newch++ = '4'; 4898 *newch = '0'; 4899 break; 4900 case '/': 4901 *newch++ = '%'; 4902 *newch++ = '2'; 4903 *newch = 'F'; 4904 break; 4905 default: 4906 *newch = *oldch; 4907 } 4908 } 4909 (void) strncpy(name, tmp, name_max_len); 4910 kmem_free(tmp, MAX_GET_NAME_SIZE); 4911 } 4912 4913 /* 4914 * iscsi_get_name_to_iqn - Converts IEEE safe address back 4915 * into a iscsi iqn/eui. 4916 */ 4917 static void 4918 iscsi_get_name_to_iqn(char *name, int name_max_len) 4919 { 4920 char *tmp = NULL; 4921 char *oldch = NULL; 4922 char *newch = NULL; 4923 4924 tmp = kmem_zalloc(MAX_GET_NAME_SIZE, KM_SLEEP); 4925 4926 for (oldch = &name[0], newch = &tmp[0]; *oldch != '\0'; 4927 oldch++, newch++) { 4928 if (*oldch == '%') { 4929 switch (*(oldch+1)) { 4930 case '2': 4931 if (*(oldch+2) == '0') { 4932 *newch = ' '; 4933 oldch += 2; 4934 } else if (*(oldch+2) == 'F') { 4935 *newch = '/'; 4936 oldch += 2; 4937 } else { 4938 *newch = *oldch; 4939 } 4940 break; 4941 case '3': 4942 if (*(oldch+2) == 'A') { 4943 *newch = ':'; 4944 oldch += 2; 4945 } else { 4946 *newch = *oldch; 4947 } 4948 break; 4949 case '4': 4950 if (*(oldch+2) == '0') { 4951 *newch = '@'; 4952 oldch += 2; 4953 } else { 4954 *newch = *oldch; 4955 } 4956 break; 4957 default: 4958 *newch = *oldch; 4959 } 4960 } else { 4961 *newch = *oldch; 4962 } 4963 } 4964 (void) strncpy(name, tmp, name_max_len); 4965 kmem_free(tmp, MAX_GET_NAME_SIZE); 4966 } 4967 4968 /* 4969 * iscsi_get_persisted_param * - a helper to ISCSI_GET_PARAM ioctl 4970 * 4971 * On return 0 means persisted parameter found 4972 */ 4973 int 4974 iscsi_get_persisted_param(uchar_t *name, iscsi_param_get_t *ipgp, 4975 iscsi_login_params_t *params) 4976 { 4977 int rtn = 1; 4978 persistent_param_t *pparam; 4979 4980 if (name == NULL || strlen((char *)name) == 0) { 4981 return (rtn); 4982 } 4983 4984 pparam = (persistent_param_t *)kmem_zalloc(sizeof (*pparam), KM_SLEEP); 4985 4986 if (persistent_param_get((char *)name, pparam) == B_TRUE) { 4987 if (pparam->p_bitmap & (1 << ipgp->g_param)) { 4988 /* Found configured parameter. */ 4989 bcopy(&pparam->p_params, params, sizeof (*params)); 4990 rtn = 0; 4991 } 4992 } 4993 4994 kmem_free(pparam, sizeof (*pparam)); 4995 4996 return (rtn); 4997 } 4998 4999 /* 5000 * iscsi_override_target_default - helper function set the target's default 5001 * login parameter if there is a configured initiator parameter. 5002 * 5003 */ 5004 static void 5005 iscsi_override_target_default(iscsi_hba_t *ihp, iscsi_param_get_t *ipg) 5006 { 5007 persistent_param_t *pp; 5008 iscsi_login_params_t *params; 5009 5010 pp = (persistent_param_t *)kmem_zalloc(sizeof (*pp), KM_SLEEP); 5011 if (persistent_param_get((char *)ihp->hba_name, pp) == B_TRUE) { 5012 if (pp->p_bitmap & (1 << ipg->g_param)) { 5013 params = &pp->p_params; 5014 switch (ipg->g_param) { 5015 case ISCSI_LOGIN_PARAM_DATA_SEQUENCE_IN_ORDER: 5016 ipg->g_value.v_bool.b_default = 5017 params->data_sequence_in_order; 5018 break; 5019 case ISCSI_LOGIN_PARAM_IMMEDIATE_DATA: 5020 ipg->g_value.v_bool.b_default = 5021 params->immediate_data; 5022 break; 5023 case ISCSI_LOGIN_PARAM_INITIAL_R2T: 5024 ipg->g_value.v_bool.b_default = 5025 params->initial_r2t; 5026 break; 5027 case ISCSI_LOGIN_PARAM_DATA_PDU_IN_ORDER: 5028 ipg->g_value.v_bool.b_default = 5029 params->data_pdu_in_order; 5030 break; 5031 case ISCSI_LOGIN_PARAM_HEADER_DIGEST: 5032 ipg->g_value.v_integer.i_default = 5033 params->header_digest; 5034 break; 5035 case ISCSI_LOGIN_PARAM_DATA_DIGEST: 5036 ipg->g_value.v_integer.i_default = 5037 params->data_digest; 5038 break; 5039 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_RETAIN: 5040 ipg->g_value.v_integer.i_default = 5041 params->default_time_to_retain; 5042 break; 5043 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_WAIT: 5044 ipg->g_value.v_integer.i_default = 5045 params->default_time_to_wait; 5046 break; 5047 case ISCSI_LOGIN_PARAM_ERROR_RECOVERY_LEVEL: 5048 ipg->g_value.v_integer.i_default = 5049 params->error_recovery_level; 5050 break; 5051 case ISCSI_LOGIN_PARAM_FIRST_BURST_LENGTH: 5052 ipg->g_value.v_integer.i_default = 5053 params->first_burst_length; 5054 break; 5055 case ISCSI_LOGIN_PARAM_MAX_BURST_LENGTH: 5056 ipg->g_value.v_integer.i_default = 5057 params->max_burst_length; 5058 break; 5059 case ISCSI_LOGIN_PARAM_MAX_CONNECTIONS: 5060 ipg->g_value.v_integer.i_default = 5061 params->max_connections; 5062 break; 5063 case ISCSI_LOGIN_PARAM_OUTSTANDING_R2T: 5064 ipg->g_value.v_integer.i_default = 5065 params->max_outstanding_r2t; 5066 break; 5067 case ISCSI_LOGIN_PARAM_MAX_RECV_DATA_SEGMENT_LENGTH: 5068 ipg->g_value.v_integer.i_default = 5069 params->max_xmit_data_seg_len; 5070 break; 5071 default: 5072 break; 5073 } 5074 } 5075 } 5076 kmem_free(pp, sizeof (*pp)); 5077 } 5078 5079 static boolean_t 5080 iscsi_cmp_boot_sess_oid(iscsi_hba_t *ihp, uint32_t oid) 5081 { 5082 iscsi_sess_t *isp = NULL; 5083 5084 if (iscsi_chk_bootlun_mpxio(ihp)) { 5085 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) { 5086 if ((isp->sess_oid == oid) && isp->sess_boot) { 5087 /* oid is session object */ 5088 break; 5089 } 5090 if ((isp->sess_target_oid == oid) && isp->sess_boot) { 5091 /* 5092 * oid is target object while 5093 * this session is boot session 5094 */ 5095 break; 5096 } 5097 } 5098 if (oid == ihp->hba_oid) { 5099 /* oid is initiator object id */ 5100 return (B_TRUE); 5101 } else if ((isp != NULL) && (isp->sess_boot)) { 5102 /* oid is boot session object id */ 5103 return (B_TRUE); 5104 } 5105 } 5106 return (B_FALSE); 5107 } 5108 5109 /* 5110 * iscsi_client_request_service - request the iSCSI service 5111 * returns true if the service is enabled and increases the count 5112 * returns false if the service is disabled 5113 * blocks until the service status is either enabled or disabled 5114 */ 5115 boolean_t 5116 iscsi_client_request_service(iscsi_hba_t *ihp) { 5117 boolean_t rval = B_TRUE; 5118 5119 mutex_enter(&ihp->hba_service_lock); 5120 while ((ihp->hba_service_status == ISCSI_SERVICE_TRANSITION) || 5121 (ihp->hba_service_client_count == UINT_MAX)) { 5122 cv_wait(&ihp->hba_service_cv, &ihp->hba_service_lock); 5123 } 5124 if (ihp->hba_service_status == ISCSI_SERVICE_ENABLED) { 5125 ihp->hba_service_client_count++; 5126 } else { 5127 rval = B_FALSE; 5128 } 5129 mutex_exit(&ihp->hba_service_lock); 5130 5131 return (rval); 5132 } 5133 5134 /* 5135 * iscsi_client_release_service - decrease the count and wake up 5136 * blocking threads if the count reaches zero 5137 */ 5138 void 5139 iscsi_client_release_service(iscsi_hba_t *ihp) { 5140 mutex_enter(&ihp->hba_service_lock); 5141 ASSERT(ihp->hba_service_client_count > 0); 5142 ihp->hba_service_client_count--; 5143 if (ihp->hba_service_client_count == 0) { 5144 cv_broadcast(&ihp->hba_service_cv); 5145 } 5146 mutex_exit(&ihp->hba_service_lock); 5147 } 5148 5149 /* 5150 * iscsi_enter_service_zone - enter the service zone, should be called 5151 * before doing any modifications to the service status 5152 * return TRUE if the zone is entered 5153 * FALSE if no need to enter the zone 5154 */ 5155 static boolean_t 5156 iscsi_enter_service_zone(iscsi_hba_t *ihp, uint32_t status) { 5157 if ((status != ISCSI_SERVICE_ENABLED) && 5158 (status != ISCSI_SERVICE_DISABLED)) { 5159 return (B_FALSE); 5160 } 5161 5162 mutex_enter(&ihp->hba_service_lock); 5163 while (ihp->hba_service_status == ISCSI_SERVICE_TRANSITION) { 5164 cv_wait(&ihp->hba_service_cv, &ihp->hba_service_lock); 5165 } 5166 if (ihp->hba_service_status == status) { 5167 mutex_exit(&ihp->hba_service_lock); 5168 return (B_FALSE); 5169 } 5170 ihp->hba_service_status = ISCSI_SERVICE_TRANSITION; 5171 while (ihp->hba_service_client_count > 0) { 5172 cv_wait(&ihp->hba_service_cv, &ihp->hba_service_lock); 5173 } 5174 mutex_exit(&ihp->hba_service_lock); 5175 return (B_TRUE); 5176 } 5177 5178 /* 5179 * iscsi_exit_service_zone - exits the service zone and wakes up waiters 5180 */ 5181 static void 5182 iscsi_exit_service_zone(iscsi_hba_t *ihp, uint32_t status) { 5183 if ((status != ISCSI_SERVICE_ENABLED) && 5184 (status != ISCSI_SERVICE_DISABLED)) { 5185 return; 5186 } 5187 5188 mutex_enter(&ihp->hba_service_lock); 5189 ASSERT(ihp->hba_service_status == ISCSI_SERVICE_TRANSITION); 5190 ihp->hba_service_status = status; 5191 cv_broadcast(&ihp->hba_service_cv); 5192 mutex_exit(&ihp->hba_service_lock); 5193 } 5194 5195 static void 5196 iscsi_check_miniroot(iscsi_hba_t *ihp) { 5197 if (strncmp(rootfs.bo_name, "/ramdisk", 8) == 0) { 5198 /* 5199 * in miniroot we don't have the persistent store 5200 * so just to need to ensure an enabled status 5201 */ 5202 ihp->hba_service_status = ISCSI_SERVICE_ENABLED; 5203 } 5204 } 5205