1 /* 2 * Copyright 2017 Gary Mills 3 * Copyright 2010 Sun Microsystems, Inc. All rights reserved. 4 * Use is subject to license terms. 5 * Copyright 2019 Joyent, Inc. 6 */ 7 8 /* 9 * Copyright (c) 2007, 2008 10 * Damien Bergamini <damien.bergamini@free.fr> 11 * 12 * Permission to use, copy, modify, and distribute this software for any 13 * purpose with or without fee is hereby granted, provided that the above 14 * copyright notice and this permission notice appear in all copies. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 17 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 18 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 19 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 20 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 21 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 22 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 23 */ 24 25 /* 26 * Ralink Technology RT2860 chipset driver 27 * http://www.ralinktech.com/ 28 */ 29 30 #include <sys/types.h> 31 #include <sys/byteorder.h> 32 #include <sys/conf.h> 33 #include <sys/cmn_err.h> 34 #include <sys/stat.h> 35 #include <sys/ddi.h> 36 #include <sys/sunddi.h> 37 #include <sys/strsubr.h> 38 #include <inet/common.h> 39 #include <sys/note.h> 40 #include <sys/stream.h> 41 #include <sys/strsun.h> 42 #include <sys/modctl.h> 43 #include <sys/devops.h> 44 #include <sys/mac_provider.h> 45 #include <sys/mac_wifi.h> 46 #include <sys/net80211.h> 47 #include <sys/net80211_proto.h> 48 #include <sys/varargs.h> 49 #include <sys/pci.h> 50 #include <sys/crypto/common.h> 51 #include <sys/crypto/api.h> 52 #include <inet/wifi_ioctl.h> 53 54 #include "rt2860_reg.h" 55 #include "rt2860_var.h" 56 57 #define RT2860_DBG_80211 (1 << 0) 58 #define RT2860_DBG_DMA (1 << 1) 59 #define RT2860_DBG_EEPROM (1 << 2) 60 #define RT2860_DBG_FW (1 << 3) 61 #define RT2860_DBG_HW (1 << 4) 62 #define RT2860_DBG_INTR (1 << 5) 63 #define RT2860_DBG_RX (1 << 6) 64 #define RT2860_DBG_SCAN (1 << 7) 65 #define RT2860_DBG_TX (1 << 8) 66 #define RT2860_DBG_RADIO (1 << 9) 67 #define RT2860_DBG_RESUME (1 << 10) 68 #define RT2860_DBG_MSG (1 << 11) 69 70 uint32_t rt2860_dbg_flags = 0x0; 71 72 #ifdef DEBUG 73 #define RWN_DEBUG \ 74 rt2860_debug 75 #else 76 #define RWN_DEBUG(...) (void)(0) 77 #endif 78 79 static void *rt2860_soft_state_p = NULL; 80 static uint8_t rt2860_fw_bin [] = { 81 #include "fw-rt2860/rt2860.ucode" 82 }; 83 84 static const struct ieee80211_rateset rt2860_rateset_11b = 85 { 4, { 2, 4, 11, 22 } }; 86 87 static const struct ieee80211_rateset rt2860_rateset_11g = 88 { 12, { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 } }; 89 90 static const struct { 91 uint32_t reg; 92 uint32_t val; 93 } rt2860_def_mac[] = { 94 RT2860_DEF_MAC 95 }; 96 97 static const struct { 98 uint8_t reg; 99 uint8_t val; 100 } rt2860_def_bbp[] = { 101 RT2860_DEF_BBP 102 }; 103 104 static const struct rfprog { 105 uint8_t chan; 106 uint32_t r1, r2, r3, r4; 107 } rt2860_rf2850[] = { 108 RT2860_RF2850 109 }; 110 111 /* 112 * PIO access attributes for registers 113 */ 114 static ddi_device_acc_attr_t rwn_csr_accattr = { 115 DDI_DEVICE_ATTR_V0, 116 DDI_STRUCTURE_LE_ACC, 117 DDI_STRICTORDER_ACC 118 }; 119 120 /* 121 * DMA access attributes for descriptors: NOT to be byte swapped. 122 */ 123 static ddi_device_acc_attr_t rt2860_desc_accattr = { 124 DDI_DEVICE_ATTR_V0, 125 DDI_STRUCTURE_LE_ACC, 126 DDI_STRICTORDER_ACC 127 }; 128 129 static ddi_device_acc_attr_t rt2860_buf_accattr = { 130 DDI_DEVICE_ATTR_V0, 131 DDI_NEVERSWAP_ACC, 132 DDI_STRICTORDER_ACC, 133 DDI_DEFAULT_ACC 134 }; 135 136 /* 137 * Describes the chip's DMA engine 138 */ 139 static ddi_dma_attr_t rt2860_dma_attr = { 140 DMA_ATTR_V0, /* dma_attr version */ 141 0x0, /* dma_attr_addr_lo */ 142 0xffffffffU, /* dma_attr_addr_hi */ 143 0xffffffffU, /* dma_attr_count_max */ 144 16, /* dma_attr_align */ 145 0x00000fff, /* dma_attr_burstsizes */ 146 1, /* dma_attr_minxfer */ 147 0xffffffffU, /* dma_attr_maxxfer */ 148 0xffffffffU, /* dma_attr_seg */ 149 1, /* dma_attr_sgllen */ 150 1, /* dma_attr_granular */ 151 0 /* dma_attr_flags */ 152 }; 153 154 static uint16_t rt2860_eeprom_read(struct rt2860_softc *, uint8_t); 155 static int rt2860_read_eeprom(struct rt2860_softc *); 156 const char *rt2860_get_rf(uint8_t); 157 static int rt2860_alloc_dma_mem(dev_info_t *, ddi_dma_attr_t *, size_t, 158 ddi_device_acc_attr_t *, uint_t, uint_t, struct dma_area *); 159 static void rt2860_free_dma_mem(struct dma_area *); 160 static int rt2860_alloc_tx_ring(struct rt2860_softc *, 161 struct rt2860_tx_ring *); 162 static void rt2860_free_tx_ring(struct rt2860_softc *, 163 struct rt2860_tx_ring *); 164 static int rt2860_alloc_rx_ring(struct rt2860_softc *, 165 struct rt2860_rx_ring *); 166 static void rt2860_free_rx_ring(struct rt2860_softc *, 167 struct rt2860_rx_ring *); 168 static int rt2860_alloc_tx_pool(struct rt2860_softc *); 169 static void rt2860_free_tx_pool(struct rt2860_softc *); 170 static uint16_t rt2860_txtime(int, int, uint32_t); 171 static int rt2860_ack_rate(struct ieee80211com *, int); 172 static int rt2860_send(ieee80211com_t *, mblk_t *, uint8_t); 173 static uint8_t rt2860_maxrssi_chain(struct rt2860_softc *, 174 const struct rt2860_rxwi *); 175 static void rt2860_drain_stats_fifo(struct rt2860_softc *); 176 static void rt2860_tx_intr(struct rt2860_softc *, int); 177 static void rt2860_rx_intr(struct rt2860_softc *); 178 static uint_t rt2860_softintr(caddr_t); 179 static uint_t rt2860_intr(caddr_t); 180 static void rt2860_set_region_4(struct rt2860_softc *, 181 uint32_t, uint32_t, int); 182 static int rt2860_load_microcode(struct rt2860_softc *); 183 static void rt2860_set_macaddr(struct rt2860_softc *, const uint8_t *); 184 static int rt2860_bbp_init(struct rt2860_softc *); 185 static uint8_t rt2860_mcu_bbp_read(struct rt2860_softc *, uint8_t); 186 static void rt2860_mcu_bbp_write(struct rt2860_softc *, uint8_t, uint8_t); 187 static int rt2860_mcu_cmd(struct rt2860_softc *, uint8_t, uint16_t); 188 static void rt2860_rf_write(struct rt2860_softc *, uint8_t, uint32_t); 189 static void rt2860_select_chan_group(struct rt2860_softc *, int); 190 static void rt2860_set_chan(struct rt2860_softc *, 191 struct ieee80211_channel *); 192 static void rt2860_updateprot(struct ieee80211com *); 193 static void rt2860_set_leds(struct rt2860_softc *, uint16_t); 194 static void rt2860_next_scan(void *); 195 static void rt2860_iter_func(void *, struct ieee80211_node *); 196 static void rt2860_updateslot(struct rt2860_softc *); 197 static uint8_t rt2860_rate2mcs(uint8_t); 198 static void rt2860_enable_mrr(struct rt2860_softc *); 199 static void rt2860_set_txpreamble(struct rt2860_softc *); 200 static void rt2860_set_basicrates(struct rt2860_softc *); 201 static void rt2860_set_bssid(struct rt2860_softc *, const uint8_t *); 202 static void rt2860_amrr_node_init(const struct rt2860_amrr *, 203 struct rt2860_amrr_node *); 204 static void rt2860_amrr_choose(struct rt2860_amrr *, 205 struct ieee80211_node *, struct rt2860_amrr_node *); 206 static void rt2860_newassoc(struct ieee80211com *, struct ieee80211_node *, 207 int); 208 static void rt2860_enable_tsf_sync(struct rt2860_softc *); 209 static int rt2860_newstate(struct ieee80211com *, 210 enum ieee80211_state, int); 211 static int rt2860_init(struct rt2860_softc *); 212 static void rt2860_stop(struct rt2860_softc *); 213 static int rt2860_quiesce(dev_info_t *t); 214 215 /* 216 * device operations 217 */ 218 static int rt2860_attach(dev_info_t *, ddi_attach_cmd_t); 219 static int rt2860_detach(dev_info_t *, ddi_detach_cmd_t); 220 221 /* 222 * Module Loading Data & Entry Points 223 */ 224 DDI_DEFINE_STREAM_OPS(rwn_dev_ops, nulldev, nulldev, rt2860_attach, 225 rt2860_detach, nodev, NULL, D_MP, NULL, rt2860_quiesce); 226 227 static struct modldrv rwn_modldrv = { 228 &mod_driverops, /* Type of module. This one is a driver */ 229 "Ralink RT2700/2800 driver v1.2", /* short description */ 230 &rwn_dev_ops /* driver specific ops */ 231 }; 232 233 static struct modlinkage modlinkage = { 234 MODREV_1, 235 (void *)&rwn_modldrv, 236 NULL 237 }; 238 239 static int rt2860_m_stat(void *, uint_t, uint64_t *); 240 static int rt2860_m_start(void *); 241 static void rt2860_m_stop(void *); 242 static int rt2860_m_promisc(void *, boolean_t); 243 static int rt2860_m_multicst(void *, boolean_t, const uint8_t *); 244 static int rt2860_m_unicst(void *, const uint8_t *); 245 static mblk_t *rt2860_m_tx(void *, mblk_t *); 246 static void rt2860_m_ioctl(void *, queue_t *, mblk_t *); 247 static int rt2860_m_setprop(void *arg, const char *pr_name, 248 mac_prop_id_t wldp_pr_num, 249 uint_t wldp_length, const void *wldp_buf); 250 static void rt2860_m_propinfo(void *arg, const char *pr_name, 251 mac_prop_id_t wldp_pr_num, mac_prop_info_handle_t prh); 252 static int rt2860_m_getprop(void *arg, const char *pr_name, 253 mac_prop_id_t wldp_pr_num, uint_t wldp_length, 254 void *wldp_buf); 255 256 static mac_callbacks_t rt2860_m_callbacks = { 257 MC_IOCTL | MC_SETPROP | MC_GETPROP | MC_PROPINFO, 258 rt2860_m_stat, 259 rt2860_m_start, 260 rt2860_m_stop, 261 rt2860_m_promisc, 262 rt2860_m_multicst, 263 rt2860_m_unicst, 264 rt2860_m_tx, 265 NULL, 266 rt2860_m_ioctl, 267 NULL, 268 NULL, 269 NULL, 270 rt2860_m_setprop, 271 rt2860_m_getprop, 272 rt2860_m_propinfo 273 }; 274 275 #ifdef DEBUG 276 void 277 rt2860_debug(uint32_t dbg_flags, const int8_t *fmt, ...) 278 { 279 va_list args; 280 281 if (dbg_flags & rt2860_dbg_flags) { 282 va_start(args, fmt); 283 vcmn_err(CE_CONT, fmt, args); 284 va_end(args); 285 } 286 } 287 #endif 288 289 const char * 290 rt2860_get_rf(uint8_t rev) 291 { 292 switch (rev) { 293 case RT2860_RF_2820: return "RT2820"; 294 case RT2860_RF_2850: return "RT2850"; 295 case RT2860_RF_2720: return "RT2720"; 296 case RT2860_RF_2750: return "RT2750"; 297 default: return "unknown"; 298 } 299 } 300 301 /* 302 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46, 303 * 93C66 or 93C86). 304 */ 305 static uint16_t 306 rt2860_eeprom_read(struct rt2860_softc *sc, uint8_t addr) 307 { 308 int n; 309 uint16_t val; 310 uint32_t tmp; 311 312 /* clock C once before the first command */ 313 RT2860_EEPROM_CTL(sc, 0); 314 315 RT2860_EEPROM_CTL(sc, RT2860_S); 316 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C); 317 RT2860_EEPROM_CTL(sc, RT2860_S); 318 319 /* write start bit (1) */ 320 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D); 321 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D | RT2860_C); 322 323 /* write READ opcode (10) */ 324 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D); 325 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D | RT2860_C); 326 RT2860_EEPROM_CTL(sc, RT2860_S); 327 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C); 328 329 /* write address (A5-A0 or A7-A0) */ 330 n = ((RT2860_READ(sc, RT2860_PCI_EECTRL) & 0x30) == 0) ? 5 : 7; 331 for (; n >= 0; n--) { 332 RT2860_EEPROM_CTL(sc, RT2860_S | 333 (((addr >> n) & 1) << RT2860_SHIFT_D)); 334 RT2860_EEPROM_CTL(sc, RT2860_S | 335 (((addr >> n) & 1) << RT2860_SHIFT_D) | RT2860_C); 336 } 337 338 RT2860_EEPROM_CTL(sc, RT2860_S); 339 340 /* read data Q15-Q0 */ 341 val = 0; 342 for (n = 15; n >= 0; n--) { 343 RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C); 344 tmp = RT2860_READ(sc, RT2860_PCI_EECTRL); 345 val |= ((tmp & RT2860_Q) >> RT2860_SHIFT_Q) << n; 346 RT2860_EEPROM_CTL(sc, RT2860_S); 347 } 348 349 RT2860_EEPROM_CTL(sc, 0); 350 351 /* clear Chip Select and clock C */ 352 RT2860_EEPROM_CTL(sc, RT2860_S); 353 RT2860_EEPROM_CTL(sc, 0); 354 RT2860_EEPROM_CTL(sc, RT2860_C); 355 356 return (val); 357 } 358 359 /* 360 * Add `delta' (signed) to each 4-bit sub-word of a 32-bit word. 361 * Used to adjust per-rate Tx power registers. 362 */ 363 static inline uint32_t 364 b4inc(uint32_t b32, int8_t delta) 365 { 366 int8_t i, b4; 367 368 for (i = 0; i < 8; i++) { 369 b4 = b32 & 0xf; 370 b4 += delta; 371 if (b4 < 0) 372 b4 = 0; 373 else if (b4 > 0xf) 374 b4 = 0xf; 375 b32 = b32 >> 4 | b4 << 28; 376 } 377 return (b32); 378 } 379 380 static int 381 rt2860_read_eeprom(struct rt2860_softc *sc) 382 { 383 struct ieee80211com *ic = &sc->sc_ic; 384 int ridx, ant, i; 385 int8_t delta_2ghz, delta_5ghz; 386 uint16_t val; 387 388 /* read EEPROM version */ 389 val = rt2860_eeprom_read(sc, RT2860_EEPROM_VERSION); 390 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 391 "EEPROM rev=%d, FAE=%d\n", 392 val & 0xff, val >> 8); 393 394 /* read MAC address */ 395 val = rt2860_eeprom_read(sc, RT2860_EEPROM_MAC01); 396 ic->ic_macaddr[0] = val & 0xff; 397 ic->ic_macaddr[1] = val >> 8; 398 val = rt2860_eeprom_read(sc, RT2860_EEPROM_MAC23); 399 ic->ic_macaddr[2] = val & 0xff; 400 ic->ic_macaddr[3] = val >> 8; 401 val = rt2860_eeprom_read(sc, RT2860_EEPROM_MAC45); 402 ic->ic_macaddr[4] = val & 0xff; 403 ic->ic_macaddr[5] = val >> 8; 404 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 405 "MAC address is: %x:%x:%x:%x:%x:%x\n", 406 ic->ic_macaddr[0], ic->ic_macaddr[1], 407 ic->ic_macaddr[2], ic->ic_macaddr[3], 408 ic->ic_macaddr[4], ic->ic_macaddr[5]); 409 410 /* read country code */ 411 val = rt2860_eeprom_read(sc, RT2860_EEPROM_COUNTRY); 412 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 413 "EEPROM region code=0x%04x\n", val); 414 415 /* read default BBP settings */ 416 for (i = 0; i < 8; i++) { 417 val = rt2860_eeprom_read(sc, RT2860_EEPROM_BBP_BASE + i); 418 sc->bbp[i].val = val & 0xff; 419 sc->bbp[i].reg = val >> 8; 420 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 421 "BBP%d=0x%02x\n", 422 sc->bbp[i].reg, sc->bbp[i].val); 423 } 424 425 /* read RF frequency offset from EEPROM */ 426 val = rt2860_eeprom_read(sc, RT2860_EEPROM_FREQ_LEDS); 427 sc->freq = ((val & 0xff) != 0xff) ? val & 0xff : 0; 428 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 429 "EEPROM freq offset %d\n", sc->freq & 0xff); 430 431 if ((sc->leds = val >> 8) != 0xff) { 432 /* read LEDs operating mode */ 433 sc->led[0] = rt2860_eeprom_read(sc, RT2860_EEPROM_LED1); 434 sc->led[1] = rt2860_eeprom_read(sc, RT2860_EEPROM_LED2); 435 sc->led[2] = rt2860_eeprom_read(sc, RT2860_EEPROM_LED3); 436 } else { 437 /* broken EEPROM, use default settings */ 438 sc->leds = 0x01; 439 sc->led[0] = 0x5555; 440 sc->led[1] = 0x2221; 441 sc->led[2] = 0xa9f8; 442 } 443 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 444 "EEPROM LED mode=0x%02x, LEDs=0x%04x/0x%04x/0x%04x\n", 445 sc->leds, sc->led[0], sc->led[1], sc->led[2]); 446 447 /* read RF information */ 448 val = rt2860_eeprom_read(sc, RT2860_EEPROM_ANTENNA); 449 if (val == 0xffff) { 450 /* broken EEPROM, default to RF2820 1T2R */ 451 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 452 "invalid EEPROM antenna info, using default\n"); 453 sc->rf_rev = RT2860_RF_2820; 454 sc->ntxchains = 1; 455 sc->nrxchains = 2; 456 } else { 457 sc->rf_rev = (val >> 8) & 0xf; 458 sc->ntxchains = (val >> 4) & 0xf; 459 sc->nrxchains = val & 0xf; 460 } 461 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 462 "EEPROM RF rev=0x%02x chains=%dT%dR\n", 463 sc->rf_rev, sc->ntxchains, sc->nrxchains); 464 465 /* check if RF supports automatic Tx access gain control */ 466 val = rt2860_eeprom_read(sc, RT2860_EEPROM_CONFIG); 467 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 468 "EEPROM CFG 0x%04x\n", val); 469 if ((val & 0xff) != 0xff) 470 sc->calib_2ghz = sc->calib_5ghz = 0; /* XXX (val >> 1) & 1 */; 471 472 if (sc->sc_flags & RT2860_ADVANCED_PS) { 473 /* read PCIe power save level */ 474 val = rt2860_eeprom_read(sc, RT2860_EEPROM_PCIE_PSLEVEL); 475 if ((val & 0xff) != 0xff) { 476 sc->pslevel = val & 0x3; 477 val = rt2860_eeprom_read(sc, RT2860_EEPROM_REV); 478 if (val >> 8 != 0x92 || !(val & 0x80)) 479 sc->pslevel = MIN(sc->pslevel, 1); 480 RWN_DEBUG(RT2860_DBG_EEPROM, 481 "rwn: rt2860_read_eeprom(): " 482 "EEPROM PCIe PS Level=%d\n", 483 sc->pslevel); 484 } 485 } 486 /* read power settings for 2GHz channels */ 487 for (i = 0; i < 14; i += 2) { 488 val = rt2860_eeprom_read(sc, 489 RT2860_EEPROM_PWR2GHZ_BASE1 + i / 2); 490 sc->txpow1[i + 0] = (int8_t)(val & 0xff); 491 sc->txpow1[i + 1] = (int8_t)(val >> 8); 492 493 val = rt2860_eeprom_read(sc, 494 RT2860_EEPROM_PWR2GHZ_BASE2 + i / 2); 495 sc->txpow2[i + 0] = (int8_t)(val & 0xff); 496 sc->txpow2[i + 1] = (int8_t)(val >> 8); 497 } 498 /* fix broken Tx power entries */ 499 for (i = 0; i < 14; i++) { 500 if (sc->txpow1[i] < 0 || sc->txpow1[i] > 31) 501 sc->txpow1[i] = 5; 502 if (sc->txpow2[i] < 0 || sc->txpow2[i] > 31) 503 sc->txpow2[i] = 5; 504 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 505 "chan %d: power1=%d, power2=%d\n", 506 rt2860_rf2850[i].chan, sc->txpow1[i], sc->txpow2[i]); 507 } 508 /* read power settings for 5GHz channels */ 509 for (i = 0; i < 36; i += 2) { 510 val = rt2860_eeprom_read(sc, 511 RT2860_EEPROM_PWR5GHZ_BASE1 + i / 2); 512 sc->txpow1[i + 14] = (int8_t)(val & 0xff); 513 sc->txpow1[i + 15] = (int8_t)(val >> 8); 514 515 val = rt2860_eeprom_read(sc, 516 RT2860_EEPROM_PWR5GHZ_BASE2 + i / 2); 517 sc->txpow2[i + 14] = (int8_t)(val & 0xff); 518 sc->txpow2[i + 15] = (int8_t)(val >> 8); 519 } 520 /* fix broken Tx power entries */ 521 for (i = 0; i < 35; i++) { 522 if (sc->txpow1[14 + i] < -7 || sc->txpow1[14 + i] > 15) 523 sc->txpow1[14 + i] = 5; 524 if (sc->txpow2[14 + i] < -7 || sc->txpow2[14 + i] > 15) 525 sc->txpow2[14 + i] = 5; 526 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 527 "chan %d: power1=%d, power2=%d\n", 528 rt2860_rf2850[14 + i].chan, sc->txpow1[14 + i], 529 sc->txpow2[14 + i]); 530 } 531 532 /* read Tx power compensation for each Tx rate */ 533 val = rt2860_eeprom_read(sc, RT2860_EEPROM_DELTAPWR); 534 delta_2ghz = delta_5ghz = 0; 535 if ((val & 0xff) != 0xff && (val & 0x80)) { 536 delta_2ghz = val & 0xf; 537 if (!(val & 0x40)) /* negative number */ 538 delta_2ghz = -delta_2ghz; 539 } 540 val >>= 8; 541 if ((val & 0xff) != 0xff && (val & 0x80)) { 542 delta_5ghz = val & 0xf; 543 if (!(val & 0x40)) /* negative number */ 544 delta_5ghz = -delta_5ghz; 545 } 546 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 547 "power compensation=%d (2GHz), %d (5GHz) \n", 548 delta_2ghz, delta_5ghz); 549 550 for (ridx = 0; ridx < 5; ridx++) { 551 uint32_t reg; 552 553 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RPWR + ridx); 554 reg = (uint32_t)val << 16; 555 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RPWR + ridx + 1); 556 reg |= val; 557 558 sc->txpow20mhz[ridx] = reg; 559 sc->txpow40mhz_2ghz[ridx] = b4inc(reg, delta_2ghz); 560 sc->txpow40mhz_5ghz[ridx] = b4inc(reg, delta_5ghz); 561 562 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 563 "ridx %d: power 20MHz=0x%08x, 40MHz/2GHz=0x%08x, " 564 "40MHz/5GHz=0x%08x\n", ridx, sc->txpow20mhz[ridx], 565 sc->txpow40mhz_2ghz[ridx], sc->txpow40mhz_5ghz[ridx]); 566 } 567 568 /* read factory-calibrated samples for temperature compensation */ 569 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI1_2GHZ); 570 sc->tssi_2ghz[0] = val & 0xff; /* [-4] */ 571 sc->tssi_2ghz[1] = val >> 8; /* [-3] */ 572 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI2_2GHZ); 573 sc->tssi_2ghz[2] = val & 0xff; /* [-2] */ 574 sc->tssi_2ghz[3] = val >> 8; /* [-1] */ 575 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI3_2GHZ); 576 sc->tssi_2ghz[4] = val & 0xff; /* [+0] */ 577 sc->tssi_2ghz[5] = val >> 8; /* [+1] */ 578 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI4_2GHZ); 579 sc->tssi_2ghz[6] = val & 0xff; /* [+2] */ 580 sc->tssi_2ghz[7] = val >> 8; /* [+3] */ 581 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI5_2GHZ); 582 sc->tssi_2ghz[8] = val & 0xff; /* [+4] */ 583 sc->step_2ghz = val >> 8; 584 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 585 "TSSI 2GHz: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x " 586 "0x%02x 0x%02x step=%d\n", sc->tssi_2ghz[0], sc->tssi_2ghz[1], 587 sc->tssi_2ghz[2], sc->tssi_2ghz[3], sc->tssi_2ghz[4], 588 sc->tssi_2ghz[5], sc->tssi_2ghz[6], sc->tssi_2ghz[7], 589 sc->tssi_2ghz[8], sc->step_2ghz); 590 /* check that ref value is correct, otherwise disable calibration */ 591 if (sc->tssi_2ghz[4] == 0xff) 592 sc->calib_2ghz = 0; 593 594 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI1_5GHZ); 595 sc->tssi_5ghz[0] = val & 0xff; /* [-4] */ 596 sc->tssi_5ghz[1] = val >> 8; /* [-3] */ 597 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI2_5GHZ); 598 sc->tssi_5ghz[2] = val & 0xff; /* [-2] */ 599 sc->tssi_5ghz[3] = val >> 8; /* [-1] */ 600 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI3_5GHZ); 601 sc->tssi_5ghz[4] = val & 0xff; /* [+0] */ 602 sc->tssi_5ghz[5] = val >> 8; /* [+1] */ 603 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI4_5GHZ); 604 sc->tssi_5ghz[6] = val & 0xff; /* [+2] */ 605 sc->tssi_5ghz[7] = val >> 8; /* [+3] */ 606 val = rt2860_eeprom_read(sc, RT2860_EEPROM_TSSI5_5GHZ); 607 sc->tssi_5ghz[8] = val & 0xff; /* [+4] */ 608 sc->step_5ghz = val >> 8; 609 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 610 "TSSI 5GHz: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x " 611 "0x%02x 0x%02x step=%d\n", sc->tssi_5ghz[0], sc->tssi_5ghz[1], 612 sc->tssi_5ghz[2], sc->tssi_5ghz[3], sc->tssi_5ghz[4], 613 sc->tssi_5ghz[5], sc->tssi_5ghz[6], sc->tssi_5ghz[7], 614 sc->tssi_5ghz[8], sc->step_5ghz); 615 /* check that ref value is correct, otherwise disable calibration */ 616 if (sc->tssi_5ghz[4] == 0xff) 617 sc->calib_5ghz = 0; 618 619 /* read RSSI offsets and LNA gains from EEPROM */ 620 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RSSI1_2GHZ); 621 sc->rssi_2ghz[0] = val & 0xff; /* Ant A */ 622 sc->rssi_2ghz[1] = val >> 8; /* Ant B */ 623 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RSSI2_2GHZ); 624 sc->rssi_2ghz[2] = val & 0xff; /* Ant C */ 625 sc->lna[2] = val >> 8; /* channel group 2 */ 626 627 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RSSI1_5GHZ); 628 sc->rssi_5ghz[0] = val & 0xff; /* Ant A */ 629 sc->rssi_5ghz[1] = val >> 8; /* Ant B */ 630 val = rt2860_eeprom_read(sc, RT2860_EEPROM_RSSI2_5GHZ); 631 sc->rssi_5ghz[2] = val & 0xff; /* Ant C */ 632 sc->lna[3] = val >> 8; /* channel group 3 */ 633 634 val = rt2860_eeprom_read(sc, RT2860_EEPROM_LNA); 635 sc->lna[0] = val & 0xff; /* channel group 0 */ 636 sc->lna[1] = val >> 8; /* channel group 1 */ 637 638 /* fix broken 5GHz LNA entries */ 639 if (sc->lna[2] == 0 || sc->lna[2] == 0xff) { 640 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 641 "invalid LNA for channel group %d\n", 2); 642 sc->lna[2] = sc->lna[1]; 643 } 644 if (sc->lna[3] == 0 || sc->lna[3] == 0xff) { 645 RWN_DEBUG(RT2860_DBG_EEPROM, "rwn: rt2860_read_eeprom(): " 646 "invalid LNA for channel group %d\n", 3); 647 sc->lna[3] = sc->lna[1]; 648 } 649 650 /* fix broken RSSI offset entries */ 651 for (ant = 0; ant < 3; ant++) { 652 if (sc->rssi_2ghz[ant] < -10 || sc->rssi_2ghz[ant] > 10) { 653 RWN_DEBUG(RT2860_DBG_EEPROM, 654 "rwn: rt2860_read_eeprom(): " 655 "invalid RSSI%d offset: %d (2GHz)\n", 656 ant + 1, sc->rssi_2ghz[ant]); 657 sc->rssi_2ghz[ant] = 0; 658 } 659 if (sc->rssi_5ghz[ant] < -10 || sc->rssi_5ghz[ant] > 10) { 660 RWN_DEBUG(RT2860_DBG_EEPROM, 661 "rwn: rt2860_read_eeprom(): " 662 "invalid RSSI%d offset: %d (2GHz)\n", 663 ant + 1, sc->rssi_5ghz[ant]); 664 sc->rssi_5ghz[ant] = 0; 665 } 666 } 667 668 return (RT2860_SUCCESS); 669 } 670 671 /* 672 * Allocate an DMA memory and a DMA handle for accessing it 673 */ 674 static int 675 rt2860_alloc_dma_mem(dev_info_t *devinfo, ddi_dma_attr_t *dma_attr, 676 size_t memsize, ddi_device_acc_attr_t *attr_p, uint_t alloc_flags, 677 uint_t bind_flags, struct dma_area *dma_p) 678 { 679 int err; 680 681 /* 682 * Allocate handle 683 */ 684 err = ddi_dma_alloc_handle(devinfo, dma_attr, 685 DDI_DMA_SLEEP, NULL, &dma_p->dma_hdl); 686 if (err != DDI_SUCCESS) { 687 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rwn_allo_dma_mem(): " 688 "failed to alloc handle\n"); 689 goto fail1; 690 } 691 692 /* 693 * Allocate memory 694 */ 695 err = ddi_dma_mem_alloc(dma_p->dma_hdl, memsize, attr_p, 696 alloc_flags, DDI_DMA_SLEEP, NULL, &dma_p->mem_va, 697 &dma_p->alength, &dma_p->acc_hdl); 698 if (err != DDI_SUCCESS) { 699 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rwn_alloc_dma_mem(): " 700 "failed to alloc mem\n"); 701 goto fail2; 702 } 703 704 /* 705 * Bind the two together 706 */ 707 err = ddi_dma_addr_bind_handle(dma_p->dma_hdl, NULL, 708 dma_p->mem_va, dma_p->alength, bind_flags, 709 DDI_DMA_SLEEP, NULL, &dma_p->cookie, &dma_p->ncookies); 710 if (err != DDI_DMA_MAPPED) { 711 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rwn_alloc_dma_mem(): " 712 "failed to bind handle\n"); 713 goto fail3; 714 } 715 716 if (dma_p->ncookies != 1) { 717 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rwn_alloc_dma_mem(): " 718 "failed to alloc cookies\n"); 719 goto fail4; 720 } 721 722 dma_p->nslots = ~0U; 723 dma_p->size = ~0U; 724 dma_p->token = ~0U; 725 dma_p->offset = 0; 726 return (DDI_SUCCESS); 727 728 fail4: 729 (void) ddi_dma_unbind_handle(dma_p->dma_hdl); 730 fail3: 731 ddi_dma_mem_free(&dma_p->acc_hdl); 732 fail2: 733 ddi_dma_free_handle(&dma_p->dma_hdl); 734 fail1: 735 return (err); 736 } 737 738 static void 739 rt2860_free_dma_mem(struct dma_area *dma_p) 740 { 741 if (dma_p->dma_hdl != NULL) { 742 (void) ddi_dma_unbind_handle(dma_p->dma_hdl); 743 if (dma_p->acc_hdl != NULL) { 744 ddi_dma_mem_free(&dma_p->acc_hdl); 745 dma_p->acc_hdl = NULL; 746 } 747 ddi_dma_free_handle(&dma_p->dma_hdl); 748 dma_p->ncookies = 0; 749 dma_p->dma_hdl = NULL; 750 } 751 } 752 753 /*ARGSUSED*/ 754 static int 755 rt2860_alloc_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring) 756 { 757 int size, err; 758 759 size = RT2860_TX_RING_COUNT * sizeof (struct rt2860_txd); 760 761 err = rt2860_alloc_dma_mem(sc->sc_dev, &rt2860_dma_attr, size, 762 &rt2860_desc_accattr, DDI_DMA_CONSISTENT, 763 DDI_DMA_RDWR | DDI_DMA_CONSISTENT, 764 &ring->txdesc_dma); 765 if (err != DDI_SUCCESS) { 766 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_alloc_tx_ring(): " 767 "failed to alloc dma mem\n"); 768 goto fail1; 769 } 770 771 ring->txd = (struct rt2860_txd *)ring->txdesc_dma.mem_va; 772 ring->paddr = ring->txdesc_dma.cookie.dmac_address; 773 774 ring->cur = 0; 775 ring->next = 0; 776 ring->queued = 0; 777 778 (void) bzero(ring->txd, size); 779 RT2860_DMA_SYNC(ring->txdesc_dma, DDI_DMA_SYNC_FORDEV); 780 return (DDI_SUCCESS); 781 fail1: 782 return (err); 783 } 784 785 void 786 rt2860_reset_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring) 787 { 788 struct rt2860_tx_data *data; 789 int i; 790 791 for (i = 0; i < RT2860_TX_RING_COUNT; i++) { 792 ring->txd[i].sdl0 &= ~LE_16(RT2860_TX_DDONE); 793 794 if ((data = ring->data[i]) == NULL) 795 continue; /* nothing mapped in this slot */ 796 797 /* by pass if it's quiesced */ 798 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 799 RT2860_DMA_SYNC(data->txbuf_dma, DDI_DMA_SYNC_FORDEV); 800 801 if (data->ni != NULL) { 802 ieee80211_free_node(data->ni); 803 data->ni = NULL; /* node already freed */ 804 } 805 806 SLIST_INSERT_HEAD(&sc->data_pool, data, next); 807 ring->data[i] = NULL; 808 } 809 810 /* by pass if it's quiesced */ 811 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 812 RT2860_DMA_SYNC(ring->txdesc_dma, DDI_DMA_SYNC_FORDEV); 813 814 ring->queued = 0; 815 ring->cur = ring->next = 0; 816 } 817 818 /*ARGSUSED*/ 819 static void 820 rt2860_free_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring) 821 { 822 if (ring->txd != NULL) { 823 rt2860_free_dma_mem(&ring->txdesc_dma); 824 } 825 } 826 827 static int 828 rt2860_alloc_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring) 829 { 830 struct rt2860_rx_data *data; 831 struct rt2860_rxd *rxd; 832 int i, err, size, datalen; 833 834 size = RT2860_RX_RING_COUNT * sizeof (struct rt2860_rxd); 835 836 err = rt2860_alloc_dma_mem(sc->sc_dev, &rt2860_dma_attr, size, 837 &rt2860_desc_accattr, DDI_DMA_CONSISTENT, 838 DDI_DMA_RDWR | DDI_DMA_CONSISTENT, 839 &ring->rxdesc_dma); 840 if (err != DDI_SUCCESS) { 841 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_alloc_rx_ring(): " 842 "failed to alloc dma mem\n"); 843 goto fail1; 844 } 845 846 ring->rxd = (struct rt2860_rxd *)ring->rxdesc_dma.mem_va; 847 ring->paddr = ring->rxdesc_dma.cookie.dmac_address; 848 bzero(ring->rxd, size); 849 850 /* 851 * Pre-allocate Rx buffers and populate Rx ring. 852 */ 853 datalen = RT2860_RX_RING_COUNT * sizeof (struct rt2860_rx_data); 854 bzero(ring->data, datalen); 855 for (i = 0; i < RT2860_RX_RING_COUNT; i++) { 856 rxd = &ring->rxd[i]; 857 data = &ring->data[i]; 858 /* alloc DMA memory */ 859 (void) rt2860_alloc_dma_mem(sc->sc_dev, &rt2860_dma_attr, 860 sc->sc_dmabuf_size, 861 &rt2860_buf_accattr, 862 DDI_DMA_STREAMING, 863 DDI_DMA_READ | DDI_DMA_STREAMING, 864 &data->rxbuf_dma); 865 rxd->sdp0 = LE_32(data->rxbuf_dma.cookie.dmac_address); 866 rxd->sdl0 = LE_16(sc->sc_dmabuf_size); 867 } 868 869 ring->cur = 0; 870 871 RT2860_DMA_SYNC(ring->rxdesc_dma, DDI_DMA_SYNC_FORDEV); 872 return (DDI_SUCCESS); 873 fail2: 874 rt2860_free_dma_mem(&ring->rxdesc_dma); 875 fail1: 876 return (err); 877 } 878 879 /*ARGSUSED*/ 880 void 881 rt2860_reset_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring) 882 { 883 int i; 884 885 for (i = 0; i < RT2860_RX_RING_COUNT; i++) 886 ring->rxd[i].sdl0 &= ~LE_16(RT2860_RX_DDONE); 887 888 RT2860_DMA_SYNC(ring->rxdesc_dma, DDI_DMA_SYNC_FORDEV); 889 890 ring->cur = 0; 891 } 892 893 /*ARGSUSED*/ 894 static void 895 rt2860_free_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring) 896 { 897 struct rt2860_rx_data *data; 898 int i, count; 899 900 if (ring->rxd != NULL) 901 rt2860_free_dma_mem(&ring->rxdesc_dma); 902 903 count = RT2860_RX_RING_COUNT; 904 905 for (i = 0; i < count; i++) { 906 data = &ring->data[i]; 907 rt2860_free_dma_mem(&data->rxbuf_dma); 908 } 909 } 910 911 static int 912 rt2860_alloc_tx_pool(struct rt2860_softc *sc) 913 { 914 struct rt2860_tx_data *data; 915 int i, err, size; 916 917 size = RT2860_TX_POOL_COUNT * sizeof (struct rt2860_txwi); 918 919 /* init data_pool early in case of failure.. */ 920 SLIST_INIT(&sc->data_pool); 921 922 err = rt2860_alloc_dma_mem(sc->sc_dev, &rt2860_dma_attr, size, 923 &rt2860_desc_accattr, DDI_DMA_CONSISTENT, 924 DDI_DMA_RDWR | DDI_DMA_CONSISTENT, 925 &sc->txpool_dma); 926 if (err != DDI_SUCCESS) { 927 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_alloc_tx_pool(): " 928 "failed to alloc dma mem\n"); 929 goto fail1; 930 } 931 932 sc->txwi = (struct rt2860_txwi *)sc->txpool_dma.mem_va; 933 (void) bzero(sc->txwi, size); 934 RT2860_DMA_SYNC(sc->txpool_dma, DDI_DMA_SYNC_FORDEV); 935 936 for (i = 0; i < RT2860_TX_POOL_COUNT; i++) { 937 data = &sc->data[i]; 938 939 err = rt2860_alloc_dma_mem(sc->sc_dev, &rt2860_dma_attr, 940 sc->sc_dmabuf_size, 941 &rt2860_buf_accattr, DDI_DMA_CONSISTENT, 942 DDI_DMA_RDWR | DDI_DMA_CONSISTENT, 943 &data->txbuf_dma); 944 if (err != DDI_SUCCESS) { 945 RWN_DEBUG(RT2860_DBG_DMA, 946 "rwn: rt2860_alloc_tx_pool(): " 947 "failed to alloc dma mem\n"); 948 goto fail2; 949 } 950 data->txwi = &sc->txwi[i]; 951 data->paddr = sc->txpool_dma.cookie.dmac_address + 952 i * sizeof (struct rt2860_txwi); 953 954 SLIST_INSERT_HEAD(&sc->data_pool, data, next); 955 } 956 return (DDI_SUCCESS); 957 fail2: 958 rt2860_free_dma_mem(&sc->txpool_dma); 959 fail1: 960 return (err); 961 } 962 963 static void 964 rt2860_free_tx_pool(struct rt2860_softc *sc) 965 { 966 struct rt2860_tx_data *data; 967 int i; 968 969 if (sc->txwi != NULL) { 970 rt2860_free_dma_mem(&sc->txpool_dma); 971 } 972 973 for (i = 0; i < RT2860_TX_POOL_COUNT; i++) { 974 data = &sc->data[i]; 975 rt2860_free_dma_mem(&data->txbuf_dma); 976 } 977 } 978 979 /* quickly determine if a given rate is CCK or OFDM */ 980 #define RT2860_RATE_IS_OFDM(rate) ((rate) >= 12 && (rate) != 22) 981 982 #define RT2860_ACK_SIZE 14 /* 10 + 4(FCS) */ 983 #define RT2860_SIFS_TIME 10 984 985 static uint8_t 986 rt2860_rate2mcs(uint8_t rate) 987 { 988 switch (rate) { 989 /* CCK rates */ 990 case 2: 991 return (0); 992 case 4: 993 return (1); 994 case 11: 995 return (2); 996 case 22: 997 return (3); 998 /* OFDM rates */ 999 case 12: 1000 return (0); 1001 case 18: 1002 return (1); 1003 case 24: 1004 return (2); 1005 case 36: 1006 return (3); 1007 case 48: 1008 return (4); 1009 case 72: 1010 return (5); 1011 case 96: 1012 return (6); 1013 case 108: 1014 return (7); 1015 } 1016 1017 return (0); /* shouldn't get there */ 1018 } 1019 1020 /* 1021 * Return the expected ack rate for a frame transmitted at rate `rate'. 1022 */ 1023 static int 1024 rt2860_ack_rate(struct ieee80211com *ic, int rate) 1025 { 1026 switch (rate) { 1027 /* CCK rates */ 1028 case 2: 1029 return (2); 1030 case 4: 1031 case 11: 1032 case 22: 1033 return ((ic->ic_curmode == IEEE80211_MODE_11B) ? 4 : rate); 1034 1035 /* OFDM rates */ 1036 case 12: 1037 case 18: 1038 return (12); 1039 case 24: 1040 case 36: 1041 return (24); 1042 case 48: 1043 case 72: 1044 case 96: 1045 case 108: 1046 return (48); 1047 } 1048 1049 /* default to 1Mbps */ 1050 return (2); 1051 } 1052 1053 1054 /* 1055 * Compute the duration (in us) needed to transmit `len' bytes at rate `rate'. 1056 * The function automatically determines the operating mode depending on the 1057 * given rate. `flags' indicates whether short preamble is in use or not. 1058 */ 1059 static uint16_t 1060 rt2860_txtime(int len, int rate, uint32_t flags) 1061 { 1062 uint16_t txtime; 1063 1064 if (RT2860_RATE_IS_OFDM(rate)) { 1065 /* IEEE Std 802.11g-2003, pp. 44 */ 1066 txtime = (8 + 4 * len + 3 + rate - 1) / rate; 1067 txtime = 16 + 4 + 4 * txtime + 6; 1068 } else { 1069 /* IEEE Std 802.11b-1999, pp. 28 */ 1070 txtime = (16 * len + rate - 1) / rate; 1071 if (rate != 2 && (flags & IEEE80211_F_SHPREAMBLE)) 1072 txtime += 72 + 24; 1073 else 1074 txtime += 144 + 48; 1075 } 1076 return (txtime); 1077 } 1078 1079 static int 1080 rt2860_send(ieee80211com_t *ic, mblk_t *mp, uint8_t type) 1081 { 1082 struct rt2860_softc *sc = (struct rt2860_softc *)ic; 1083 struct rt2860_tx_ring *ring; 1084 struct rt2860_tx_data *data; 1085 struct rt2860_txd *txd; 1086 struct rt2860_txwi *txwi; 1087 struct ieee80211_frame *wh; 1088 struct ieee80211_node *ni; 1089 int qid, off, rate, err; 1090 int mblen, pktlen; 1091 uint_t hdrlen; 1092 uint8_t mcs, pid, qsel; 1093 uint16_t dur; 1094 mblk_t *m, *m0; 1095 1096 err = DDI_SUCCESS; 1097 1098 mutex_enter(&sc->sc_txlock); 1099 if (RT2860_IS_SUSPEND(sc)) { 1100 err = ENXIO; 1101 goto fail1; 1102 } 1103 1104 if ((type & IEEE80211_FC0_TYPE_MASK) != 1105 IEEE80211_FC0_TYPE_DATA) 1106 qid = sc->mgtqid; 1107 else 1108 qid = EDCA_AC_BE; 1109 ring = &sc->txq[qid]; 1110 1111 if (SLIST_EMPTY(&sc->data_pool) || (ring->queued > 15)) { 1112 sc->sc_need_sched = 1; 1113 sc->sc_tx_nobuf++; 1114 err = ENOMEM; 1115 goto fail1; 1116 } 1117 1118 /* the data pool contains at least one element, pick the first */ 1119 data = SLIST_FIRST(&sc->data_pool); 1120 1121 m = allocb(msgdsize(mp) + 32, BPRI_MED); 1122 if (m == NULL) { 1123 RWN_DEBUG(RT2860_DBG_TX, "rwn: rt2860_send():" 1124 "rt2860_mgmt_send: can't alloc mblk.\n"); 1125 err = DDI_FAILURE; 1126 goto fail1; 1127 } 1128 1129 for (off = 0, m0 = mp; m0 != NULL; m0 = m0->b_cont) { 1130 mblen = MBLKL(m0); 1131 (void) bcopy(m0->b_rptr, m->b_rptr + off, mblen); 1132 off += mblen; 1133 } 1134 m->b_wptr += off; 1135 1136 wh = (struct ieee80211_frame *)m->b_rptr; 1137 ni = ieee80211_find_txnode(ic, wh->i_addr1); 1138 if (ni == NULL) { 1139 err = DDI_FAILURE; 1140 sc->sc_tx_err++; 1141 goto fail2; 1142 } 1143 1144 if ((type & IEEE80211_FC0_TYPE_MASK) == 1145 IEEE80211_FC0_TYPE_DATA) 1146 (void) ieee80211_encap(ic, m, ni); 1147 1148 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1149 struct ieee80211_key *k; 1150 k = ieee80211_crypto_encap(ic, m); 1151 if (k == NULL) { 1152 sc->sc_tx_err++; 1153 err = DDI_FAILURE; 1154 goto fail3; 1155 } 1156 /* packet header may have moved, reset our local pointer */ 1157 wh = (struct ieee80211_frame *)m->b_rptr; 1158 } 1159 pktlen = msgdsize(m); 1160 hdrlen = sizeof (*wh); 1161 1162 /* pickup a rate */ 1163 if (IEEE80211_IS_MULTICAST(wh->i_addr1) || 1164 ((type & IEEE80211_FC0_TYPE_MASK) != 1165 IEEE80211_FC0_TYPE_DATA)) 1166 rate = ni->in_rates.ir_rates[0]; 1167 else { 1168 if (ic->ic_fixed_rate != IEEE80211_FIXED_RATE_NONE) 1169 rate = ic->ic_fixed_rate; 1170 else 1171 rate = ni->in_rates.ir_rates[ni->in_txrate]; 1172 } 1173 rate &= IEEE80211_RATE_VAL; 1174 1175 /* get MCS code from rate */ 1176 mcs = rt2860_rate2mcs(rate); 1177 1178 /* setup TX Wireless Information */ 1179 txwi = data->txwi; 1180 (void) bzero(txwi, sizeof (struct rt2860_txwi)); 1181 txwi->wcid = (type == IEEE80211_FC0_TYPE_DATA) ? 1182 RT2860_AID2WCID(ni->in_associd) : 0xff; 1183 txwi->len = LE_16(pktlen); 1184 if (!RT2860_RATE_IS_OFDM(rate)) { 1185 txwi->phy = LE_16(RT2860_PHY_CCK); 1186 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1187 mcs |= RT2860_PHY_SHPRE; 1188 } else 1189 txwi->phy = LE_16(RT2860_PHY_OFDM); 1190 txwi->phy |= LE_16(mcs); 1191 1192 /* 1193 * We store the MCS code into the driver-private PacketID field. 1194 * The PacketID is latched into TX_STAT_FIFO when Tx completes so 1195 * that we know at which initial rate the frame was transmitted. 1196 * We add 1 to the MCS code because setting the PacketID field to 1197 * 0 means that we don't want feedback in TX_STAT_FIFO. 1198 */ 1199 pid = (mcs + 1) & 0xf; 1200 txwi->len |= LE_16(pid << RT2860_TX_PID_SHIFT); 1201 1202 /* check if RTS/CTS or CTS-to-self protection is required */ 1203 if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && 1204 (pktlen + IEEE80211_CRC_LEN > ic->ic_rtsthreshold || 1205 ((ic->ic_flags & 1206 IEEE80211_F_USEPROT) && RT2860_RATE_IS_OFDM(rate)))) 1207 txwi->txop = RT2860_TX_TXOP_HT; 1208 else 1209 txwi->txop = RT2860_TX_TXOP_BACKOFF; 1210 1211 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1212 txwi->xflags |= RT2860_TX_ACK; 1213 1214 dur = rt2860_txtime(RT2860_ACK_SIZE, rt2860_ack_rate(ic, rate), 1215 ic->ic_flags) + sc->sifs; 1216 *(uint16_t *)wh->i_dur = LE_16(dur); 1217 } 1218 1219 /* copy and trim 802.11 header */ 1220 bcopy(wh, &txwi->wh, hdrlen); 1221 m->b_rptr += hdrlen; 1222 bcopy(m->b_rptr, data->txbuf_dma.mem_va, pktlen - hdrlen); 1223 1224 qsel = (qid < EDCA_NUM_AC) ? RT2860_TX_QSEL_EDCA : RT2860_TX_QSEL_MGMT; 1225 1226 /* first segment is TXWI + 802.11 header */ 1227 txd = &ring->txd[ring->cur]; 1228 txd->sdp0 = LE_32(data->paddr); 1229 txd->sdl0 = LE_16(16 + hdrlen); 1230 txd->flags = qsel; 1231 1232 /* finalize last segment */ 1233 txd->sdp1 = LE_32(data->txbuf_dma.cookie.dmac_address); 1234 txd->sdl1 = LE_16(pktlen - hdrlen | RT2860_TX_LS1); 1235 1236 /* remove from the free pool and link it into the SW Tx slot */ 1237 SLIST_REMOVE_HEAD(&sc->data_pool, next); 1238 data->ni = ieee80211_ref_node(ni); 1239 ring->data[ring->cur] = data; 1240 1241 (void) ddi_dma_sync(sc->txpool_dma.dma_hdl, 1242 _PTRDIFF(txwi, sc->txwi), 1243 (hdrlen + 16 + 2), 1244 DDI_DMA_SYNC_FORDEV); 1245 RT2860_DMA_SYNC(data->txbuf_dma, DDI_DMA_SYNC_FORDEV); 1246 RT2860_DMA_SYNC(ring->txdesc_dma, DDI_DMA_SYNC_FORDEV); 1247 1248 RWN_DEBUG(RT2860_DBG_TX, "rwn: rt2860_send():" 1249 "sending frame qid=%d wcid=%d rate=%d cur = %x\n", 1250 qid, txwi->wcid, rate, ring->cur); 1251 1252 ring->queued++; 1253 ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT; 1254 1255 /* kick Tx */ 1256 RT2860_WRITE(sc, RT2860_TX_CTX_IDX(qid), ring->cur); 1257 1258 sc->sc_tx_timer = 5; 1259 1260 ic->ic_stats.is_tx_frags++; 1261 ic->ic_stats.is_tx_bytes += pktlen; 1262 1263 fail3: 1264 ieee80211_free_node(ni); 1265 fail2: 1266 freemsg(m); 1267 fail1: 1268 if ((type & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_DATA || 1269 err == DDI_SUCCESS) 1270 freemsg(mp); 1271 mutex_exit(&sc->sc_txlock); 1272 return (err); 1273 } 1274 1275 /* 1276 * This function is called periodically (every 200ms) during scanning to 1277 * switch from one channel to another. 1278 */ 1279 static void 1280 rt2860_next_scan(void *arg) 1281 { 1282 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 1283 struct ieee80211com *ic = &sc->sc_ic; 1284 1285 if (ic->ic_state == IEEE80211_S_SCAN) 1286 (void) ieee80211_next_scan(ic); 1287 } 1288 1289 static void 1290 rt2860_updateslot(struct rt2860_softc *sc) 1291 { 1292 struct ieee80211com *ic = &sc->sc_ic; 1293 uint32_t tmp; 1294 1295 tmp = RT2860_READ(sc, RT2860_BKOFF_SLOT_CFG); 1296 tmp &= ~0xff; 1297 tmp |= (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20; 1298 RT2860_WRITE(sc, RT2860_BKOFF_SLOT_CFG, tmp); 1299 } 1300 1301 static void 1302 rt2860_iter_func(void *arg, struct ieee80211_node *ni) 1303 { 1304 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 1305 uint8_t wcid; 1306 1307 wcid = RT2860_AID2WCID(ni->in_associd); 1308 rt2860_amrr_choose(&sc->amrr, ni, &sc->amn[wcid]); 1309 } 1310 1311 static void 1312 rt2860_updatestats(void *arg) 1313 { 1314 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 1315 struct ieee80211com *ic = &sc->sc_ic; 1316 1317 if (ic->ic_opmode == IEEE80211_M_STA) 1318 rt2860_iter_func(sc, ic->ic_bss); 1319 else 1320 ieee80211_iterate_nodes(&ic->ic_sta, rt2860_iter_func, arg); 1321 1322 sc->sc_rssadapt_id = timeout(rt2860_updatestats, (void *)sc, 1323 drv_usectohz(500 * 1000)); 1324 } 1325 1326 static void 1327 rt2860_enable_mrr(struct rt2860_softc *sc) 1328 { 1329 #define CCK(mcs) (mcs) 1330 #define OFDM(mcs) ((uint32_t)1 << 3 | (mcs)) 1331 RT2860_WRITE(sc, RT2860_LG_FBK_CFG0, 1332 OFDM(6) << 28 | /* 54->48 */ 1333 OFDM(5) << 24 | /* 48->36 */ 1334 OFDM(4) << 20 | /* 36->24 */ 1335 OFDM(3) << 16 | /* 24->18 */ 1336 OFDM(2) << 12 | /* 18->12 */ 1337 OFDM(1) << 8 | /* 12-> 9 */ 1338 OFDM(0) << 4 | /* 9-> 6 */ 1339 OFDM(0)); /* 6-> 6 */ 1340 1341 RT2860_WRITE(sc, RT2860_LG_FBK_CFG1, 1342 CCK(2) << 12 | /* 11->5.5 */ 1343 CCK(1) << 8 | /* 5.5-> 2 */ 1344 CCK(0) << 4 | /* 2-> 1 */ 1345 CCK(0)); /* 1-> 1 */ 1346 #undef OFDM 1347 #undef CCK 1348 } 1349 1350 static void 1351 rt2860_set_txpreamble(struct rt2860_softc *sc) 1352 { 1353 uint32_t tmp; 1354 1355 tmp = RT2860_READ(sc, RT2860_AUTO_RSP_CFG); 1356 tmp &= ~RT2860_CCK_SHORT_EN; 1357 if (sc->sc_ic.ic_flags & IEEE80211_F_SHPREAMBLE) 1358 tmp |= RT2860_CCK_SHORT_EN; 1359 RT2860_WRITE(sc, RT2860_AUTO_RSP_CFG, tmp); 1360 } 1361 1362 static void 1363 rt2860_set_bssid(struct rt2860_softc *sc, const uint8_t *bssid) 1364 { 1365 RT2860_WRITE(sc, RT2860_MAC_BSSID_DW0, 1366 bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24); 1367 RT2860_WRITE(sc, RT2860_MAC_BSSID_DW1, 1368 bssid[4] | bssid[5] << 8); 1369 } 1370 1371 static void 1372 rt2860_set_basicrates(struct rt2860_softc *sc) 1373 { 1374 struct ieee80211com *ic = &sc->sc_ic; 1375 1376 /* set basic rates mask */ 1377 if (ic->ic_curmode == IEEE80211_MODE_11B) 1378 RT2860_WRITE(sc, RT2860_LEGACY_BASIC_RATE, 0x003); 1379 else if (ic->ic_curmode == IEEE80211_MODE_11A) 1380 RT2860_WRITE(sc, RT2860_LEGACY_BASIC_RATE, 0x150); 1381 else /* 11g */ 1382 RT2860_WRITE(sc, RT2860_LEGACY_BASIC_RATE, 0x15f); 1383 } 1384 1385 static void 1386 rt2860_amrr_node_init(const struct rt2860_amrr *amrr, 1387 struct rt2860_amrr_node *amn) 1388 { 1389 amn->amn_success = 0; 1390 amn->amn_recovery = 0; 1391 amn->amn_txcnt = amn->amn_retrycnt = 0; 1392 amn->amn_success_threshold = amrr->amrr_min_success_threshold; 1393 } 1394 1395 static void 1396 rt2860_amrr_choose(struct rt2860_amrr *amrr, struct ieee80211_node *ni, 1397 struct rt2860_amrr_node *amn) 1398 { 1399 #define RV(rate) ((rate) & IEEE80211_RATE_VAL) 1400 #define is_success(amn) \ 1401 ((amn)->amn_retrycnt < (amn)->amn_txcnt / 10) 1402 #define is_failure(amn) \ 1403 ((amn)->amn_retrycnt > (amn)->amn_txcnt / 3) 1404 #define is_enough(amn) \ 1405 ((amn)->amn_txcnt > 10) 1406 #define is_min_rate(ni) \ 1407 ((ni)->in_txrate == 0) 1408 #define is_max_rate(ni) \ 1409 ((ni)->in_txrate == (ni)->in_rates.ir_nrates - 1) 1410 #define increase_rate(ni) \ 1411 ((ni)->in_txrate++) 1412 #define decrease_rate(ni) \ 1413 ((ni)->in_txrate--) 1414 #define reset_cnt(amn) \ 1415 { (amn)->amn_txcnt = (amn)->amn_retrycnt = 0; } 1416 1417 int need_change = 0; 1418 1419 if (is_success(amn) && is_enough(amn)) { 1420 amn->amn_success++; 1421 if (amn->amn_success >= amn->amn_success_threshold && 1422 !is_max_rate(ni)) { 1423 amn->amn_recovery = 1; 1424 amn->amn_success = 0; 1425 increase_rate(ni); 1426 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_amrr_choose(): " 1427 "increase rate = %d, #tx = %d, #retries = %d\n", 1428 RV(ni->in_rates.ir_rates[ni->in_txrate]), 1429 amn->amn_txcnt, amn->amn_retrycnt); 1430 need_change = 1; 1431 } else { 1432 amn->amn_recovery = 0; 1433 } 1434 } else if (is_failure(amn)) { 1435 amn->amn_success = 0; 1436 if (!is_min_rate(ni)) { 1437 if (amn->amn_recovery) { 1438 amn->amn_success_threshold *= 2; 1439 if (amn->amn_success_threshold > 1440 amrr->amrr_max_success_threshold) 1441 amn->amn_success_threshold = 1442 amrr->amrr_max_success_threshold; 1443 } else { 1444 amn->amn_success_threshold = 1445 amrr->amrr_min_success_threshold; 1446 } 1447 decrease_rate(ni); 1448 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_amrr_choose(): " 1449 "decrease rate = %d, #tx = %d, #retries = %d\n", 1450 RV(ni->in_rates.ir_rates[ni->in_txrate]), 1451 amn->amn_txcnt, amn->amn_retrycnt); 1452 need_change = 1; 1453 } 1454 amn->amn_recovery = 0; 1455 } 1456 1457 if (is_enough(amn) || need_change) 1458 reset_cnt(amn); 1459 #undef RV 1460 } 1461 1462 static void 1463 rt2860_newassoc(struct ieee80211com *ic, struct ieee80211_node *in, int isnew) 1464 { 1465 struct rt2860_softc *sc = (struct rt2860_softc *)ic; 1466 uint32_t off; 1467 uint8_t *fptr, wcid = 0; 1468 int i; 1469 1470 if (isnew && in->in_associd != 0) { 1471 /* only interested in true associations */ 1472 wcid = RT2860_AID2WCID(in->in_associd); 1473 1474 /* init WCID table entry */ 1475 off = RT2860_WCID_ENTRY(wcid); 1476 fptr = in->in_macaddr; 1477 for (i = 0; i < IEEE80211_ADDR_LEN; i++) 1478 rt2860_mem_write1(sc, off++, *fptr++); 1479 } 1480 rt2860_amrr_node_init(&sc->amrr, &sc->amn[wcid]); 1481 1482 /* set rate to some reasonable initial value */ 1483 i = in->in_rates.ir_nrates - 1; 1484 for (; i > 0 && (in->in_rates.ir_rates[i] & IEEE80211_RATE_VAL) > 72; ) 1485 i--; 1486 in->in_txrate = i; 1487 1488 RWN_DEBUG(RT2860_DBG_80211, "rwn: rt2860_newassoc(): " 1489 "new assoc isnew=%d WCID=%d, initial rate=%d\n", 1490 isnew, wcid, 1491 in->in_rates.ir_rates[i] & IEEE80211_RATE_VAL); 1492 RWN_DEBUG(RT2860_DBG_80211, "rwn: rt2860_newassoc(): " 1493 "addr=%x:%x:%x:%x:%x:%x\n", 1494 in->in_macaddr[0], in->in_macaddr[1], in->in_macaddr[2], 1495 in->in_macaddr[3], in->in_macaddr[4], in->in_macaddr[5]); 1496 } 1497 1498 void 1499 rt2860_enable_tsf_sync(struct rt2860_softc *sc) 1500 { 1501 struct ieee80211com *ic = &sc->sc_ic; 1502 uint32_t tmp; 1503 1504 tmp = RT2860_READ(sc, RT2860_BCN_TIME_CFG); 1505 1506 tmp &= ~0x1fffff; 1507 tmp |= ic->ic_bss->in_intval * 16; 1508 tmp |= RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN; 1509 if (ic->ic_opmode == IEEE80211_M_STA) { 1510 /* 1511 * Local TSF is always updated with remote TSF on beacon 1512 * reception. 1513 */ 1514 tmp |= 1 << RT2860_TSF_SYNC_MODE_SHIFT; 1515 } 1516 1517 RT2860_WRITE(sc, RT2860_BCN_TIME_CFG, tmp); 1518 } 1519 1520 static int 1521 rt2860_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) 1522 { 1523 struct rt2860_softc *sc = (struct rt2860_softc *)ic; 1524 enum ieee80211_state ostate; 1525 int err; 1526 uint32_t tmp; 1527 1528 ostate = ic->ic_state; 1529 RWN_DEBUG(RT2860_DBG_80211, "rwn: rt2860_newstate(): " 1530 "%x -> %x!\n", ostate, nstate); 1531 1532 RT2860_GLOCK(sc); 1533 if (sc->sc_scan_id != 0) { 1534 (void) untimeout(sc->sc_scan_id); 1535 sc->sc_scan_id = 0; 1536 } 1537 if (sc->sc_rssadapt_id != 0) { 1538 (void) untimeout(sc->sc_rssadapt_id); 1539 sc->sc_rssadapt_id = 0; 1540 } 1541 if (ostate == IEEE80211_S_RUN) { 1542 /* turn link LED off */ 1543 rt2860_set_leds(sc, RT2860_LED_RADIO); 1544 } 1545 1546 switch (nstate) { 1547 case IEEE80211_S_INIT: 1548 if (ostate == IEEE80211_S_RUN) { 1549 /* abort TSF synchronization */ 1550 tmp = RT2860_READ(sc, RT2860_BCN_TIME_CFG); 1551 RT2860_WRITE(sc, RT2860_BCN_TIME_CFG, 1552 tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN | 1553 RT2860_TBTT_TIMER_EN)); 1554 } 1555 break; 1556 1557 case IEEE80211_S_SCAN: 1558 rt2860_set_chan(sc, ic->ic_curchan); 1559 sc->sc_scan_id = timeout(rt2860_next_scan, (void *)sc, 1560 drv_usectohz(200000)); 1561 break; 1562 1563 case IEEE80211_S_AUTH: 1564 case IEEE80211_S_ASSOC: 1565 rt2860_set_chan(sc, ic->ic_curchan); 1566 break; 1567 1568 case IEEE80211_S_RUN: 1569 rt2860_set_chan(sc, ic->ic_curchan); 1570 1571 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 1572 rt2860_updateslot(sc); 1573 rt2860_enable_mrr(sc); 1574 rt2860_set_txpreamble(sc); 1575 rt2860_set_basicrates(sc); 1576 rt2860_set_bssid(sc, ic->ic_bss->in_bssid); 1577 } 1578 if (ic->ic_opmode == IEEE80211_M_STA) { 1579 /* fake a join to init the tx rate */ 1580 rt2860_newassoc(ic, ic->ic_bss, 1); 1581 } 1582 1583 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 1584 rt2860_enable_tsf_sync(sc); 1585 sc->sc_rssadapt_id = timeout(rt2860_updatestats, 1586 (void *)sc, drv_usectohz(500 * 1000)); 1587 } 1588 1589 /* turn link LED on */ 1590 rt2860_set_leds(sc, RT2860_LED_RADIO | 1591 (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan) ? 1592 RT2860_LED_LINK_2GHZ : RT2860_LED_LINK_5GHZ)); 1593 break; 1594 } 1595 1596 RT2860_GUNLOCK(sc); 1597 1598 err = sc->sc_newstate(ic, nstate, arg); 1599 1600 return (err); 1601 } 1602 1603 /* 1604 * Return the Rx chain with the highest RSSI for a given frame. 1605 */ 1606 static uint8_t 1607 rt2860_maxrssi_chain(struct rt2860_softc *sc, const struct rt2860_rxwi *rxwi) 1608 { 1609 uint8_t rxchain = 0; 1610 1611 if (sc->nrxchains > 1) 1612 if (rxwi->rssi[1] > rxwi->rssi[rxchain]) 1613 rxchain = 1; 1614 if (sc->nrxchains > 2) 1615 if (rxwi->rssi[2] > rxwi->rssi[rxchain]) 1616 rxchain = 2; 1617 1618 return (rxchain); 1619 } 1620 1621 static void 1622 rt2860_drain_stats_fifo(struct rt2860_softc *sc) 1623 { 1624 struct rt2860_amrr_node *amn; 1625 uint32_t stat; 1626 uint8_t wcid, mcs, pid; 1627 1628 /* drain Tx status FIFO (maxsize = 16) */ 1629 while ((stat = RT2860_READ(sc, RT2860_TX_STAT_FIFO)) & RT2860_TXQ_VLD) { 1630 RWN_DEBUG(RT2860_DBG_TX, "rwn: rt2860_drain_stats_fifo(): " 1631 "tx stat 0x%08\n", stat); 1632 1633 wcid = (stat >> 8) & 0xff; 1634 1635 /* if no ACK was requested, no feedback is available */ 1636 if (!(stat & RT2860_TXQ_ACKREQ) || wcid == 0xff) 1637 continue; 1638 /* update per-STA AMRR stats */ 1639 amn = &sc->amn[wcid]; 1640 amn->amn_txcnt++; 1641 if (stat & RT2860_TXQ_OK) { 1642 /* 1643 * Check if there were retries, ie if the Tx success 1644 * rate is different from the requested rate. Note 1645 * that it works only because we do not allow rate 1646 * fallback from OFDM to CCK. 1647 */ 1648 mcs = (stat >> RT2860_TXQ_MCS_SHIFT) & 0x7f; 1649 pid = (stat >> RT2860_TXQ_PID_SHIFT) & 0xf; 1650 if (mcs + 1 != pid) 1651 amn->amn_retrycnt++; 1652 } else 1653 amn->amn_retrycnt++; 1654 } 1655 } 1656 1657 /*ARGSUSED*/ 1658 static void 1659 rt2860_tx_intr(struct rt2860_softc *sc, int qid) 1660 { 1661 struct rt2860_tx_ring *ring = &sc->txq[qid]; 1662 struct ieee80211com *ic = &sc->sc_ic; 1663 uint32_t hw; 1664 1665 rt2860_drain_stats_fifo(sc); 1666 1667 mutex_enter(&sc->sc_txlock); 1668 hw = RT2860_READ(sc, RT2860_TX_DTX_IDX(qid)); 1669 RWN_DEBUG(RT2860_DBG_TX, "rwn: rwn_tx_intr():" 1670 "hw = %x, ring->next = %x, queued = %d\n", 1671 hw, ring->next, ring->queued); 1672 while (ring->next != hw) { 1673 struct rt2860_txd *txd = &ring->txd[ring->next]; 1674 struct rt2860_tx_data *data = ring->data[ring->next]; 1675 1676 if (data != NULL) { 1677 RT2860_DMA_SYNC(data->txbuf_dma, DDI_DMA_SYNC_FORDEV); 1678 if (data->ni != NULL) { 1679 ieee80211_free_node(data->ni); 1680 data->ni = NULL; 1681 } 1682 SLIST_INSERT_HEAD(&sc->data_pool, data, next); 1683 ring->data[ring->next] = NULL; 1684 } 1685 1686 txd->sdl0 &= ~LE_16(RT2860_TX_DDONE); 1687 1688 (void) ddi_dma_sync(ring->txdesc_dma.dma_hdl, 1689 ring->next * sizeof (struct rt2860_txd), 1690 sizeof (struct rt2860_txd), 1691 DDI_DMA_SYNC_FORDEV); 1692 1693 ring->queued--; 1694 ring->next = (ring->next + 1) % RT2860_TX_RING_COUNT; 1695 1696 if (sc->sc_need_sched && 1697 (ring->queued < RT2860_TX_RING_COUNT)) { 1698 sc->sc_need_sched = 0; 1699 mac_tx_update(ic->ic_mach); 1700 } 1701 } 1702 sc->sc_tx_timer = 0; 1703 mutex_exit(&sc->sc_txlock); 1704 } 1705 1706 static void 1707 rt2860_rx_intr(struct rt2860_softc *sc) 1708 { 1709 struct ieee80211com *ic = &sc->sc_ic; 1710 struct ieee80211_node *ni; 1711 struct ieee80211_frame *wh; 1712 int pktlen; 1713 uint8_t ant, rssi, *rxbuf; 1714 mblk_t *mp0; 1715 1716 mutex_enter(&sc->sc_rxlock); 1717 for (;;) { 1718 struct rt2860_rx_data *data = &sc->rxq.data[sc->rxq.cur]; 1719 struct rt2860_rxd *rxd = &sc->rxq.rxd[sc->rxq.cur]; 1720 struct rt2860_rxwi *rxwi; 1721 1722 (void) ddi_dma_sync(sc->rxq.rxdesc_dma.dma_hdl, 1723 sc->rxq.cur * sizeof (struct rt2860_rxd), 1724 sizeof (struct rt2860_rxd), 1725 DDI_DMA_SYNC_FORKERNEL); 1726 1727 if (!(rxd->sdl0 & LE_16(RT2860_RX_DDONE))) { 1728 RWN_DEBUG(RT2860_DBG_RX, "rwn: rt2860_rx_intr(): " 1729 "rx done!\n"); 1730 break; 1731 } 1732 1733 if (rxd->flags & 1734 LE_32(RT2860_RX_CRCERR | RT2860_RX_ICVERR)) { 1735 RWN_DEBUG(RT2860_DBG_RX, "rwn: rt2860_rx_intr(): " 1736 "rx crc error & rx icv error!\n"); 1737 sc->sc_rx_err++; 1738 goto skip; 1739 } 1740 1741 if (rxd->flags & LE_32(RT2860_RX_MICERR)) { 1742 RWN_DEBUG(RT2860_DBG_RX, "rwn: rt2860_rx_intr(): " 1743 "rx mic error!\n"); 1744 sc->sc_rx_err++; 1745 goto skip; 1746 } 1747 1748 (void) ddi_dma_sync(data->rxbuf_dma.dma_hdl, 1749 data->rxbuf_dma.offset, 1750 data->rxbuf_dma.alength, 1751 DDI_DMA_SYNC_FORCPU); 1752 1753 rxbuf = (uint8_t *)data->rxbuf_dma.mem_va; 1754 rxd->sdp0 = LE_32(data->rxbuf_dma.cookie.dmac_address); 1755 rxwi = (struct rt2860_rxwi *)rxbuf; 1756 rxbuf = (uint8_t *)(rxwi + 1); 1757 pktlen = LE_16(rxwi->len) & 0xfff; 1758 1759 mp0 = allocb(sc->sc_dmabuf_size, BPRI_MED); 1760 if (mp0 == NULL) { 1761 RWN_DEBUG(RT2860_DBG_RX, "rwn: rt2860_rx_intr():" 1762 "alloc mblk error\n"); 1763 sc->sc_rx_nobuf++; 1764 goto skip; 1765 } 1766 bcopy(rxbuf, mp0->b_rptr, pktlen); 1767 mp0->b_wptr += pktlen; 1768 1769 wh = (struct ieee80211_frame *)mp0->b_rptr; 1770 1771 /* HW may insert 2 padding bytes after 802.11 header */ 1772 if (rxd->flags & LE_32(RT2860_RX_L2PAD)) { 1773 RWN_DEBUG(RT2860_DBG_RX, "rwn: rt2860_rx_intr():" 1774 "2 padding bytes after 80211 header!\n"); 1775 } 1776 1777 ant = rt2860_maxrssi_chain(sc, rxwi); 1778 rssi = RT2860_RSSI_OFFSET - rxwi->rssi[ant]; 1779 /* grab a reference to the source node */ 1780 ni = ieee80211_find_rxnode(ic, wh); 1781 1782 (void) ieee80211_input(ic, mp0, ni, rssi, 0); 1783 1784 /* node is no longer needed */ 1785 ieee80211_free_node(ni); 1786 skip: 1787 rxd->sdl0 &= ~LE_16(RT2860_RX_DDONE); 1788 1789 (void) ddi_dma_sync(sc->rxq.rxdesc_dma.dma_hdl, 1790 sc->rxq.cur * sizeof (struct rt2860_rxd), 1791 sizeof (struct rt2860_rxd), 1792 DDI_DMA_SYNC_FORDEV); 1793 1794 sc->rxq.cur = (sc->rxq.cur + 1) % RT2860_RX_RING_COUNT; 1795 } 1796 mutex_exit(&sc->sc_rxlock); 1797 1798 /* tell HW what we have processed */ 1799 RT2860_WRITE(sc, RT2860_RX_CALC_IDX, 1800 (sc->rxq.cur - 1) % RT2860_RX_RING_COUNT); 1801 } 1802 1803 static uint_t 1804 rt2860_softintr(caddr_t data) 1805 { 1806 struct rt2860_softc *sc = (struct rt2860_softc *)data; 1807 1808 /* 1809 * Check if the soft interrupt is triggered by another 1810 * driver at the same level. 1811 */ 1812 RT2860_GLOCK(sc); 1813 if (sc->sc_rx_pend) { 1814 sc->sc_rx_pend = 0; 1815 RT2860_GUNLOCK(sc); 1816 rt2860_rx_intr(sc); 1817 return (DDI_INTR_CLAIMED); 1818 } 1819 RT2860_GUNLOCK(sc); 1820 1821 return (DDI_INTR_UNCLAIMED); 1822 } 1823 1824 static uint_t 1825 rt2860_intr(caddr_t arg) 1826 { 1827 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 1828 uint32_t r; 1829 1830 RT2860_GLOCK(sc); 1831 1832 if ((!RT2860_IS_RUNNING(sc)) || RT2860_IS_SUSPEND(sc)) { 1833 /* 1834 * The hardware is not ready/present, don't touch anything. 1835 * Note this can happen early on if the IRQ is shared. 1836 */ 1837 RT2860_GUNLOCK(sc); 1838 return (DDI_INTR_UNCLAIMED); 1839 } 1840 1841 r = RT2860_READ(sc, RT2860_INT_STATUS); 1842 if (r == 0xffffffff) { 1843 RT2860_GUNLOCK(sc); 1844 return (DDI_INTR_UNCLAIMED); 1845 } 1846 if (r == 0) { 1847 RT2860_GUNLOCK(sc); 1848 return (DDI_INTR_UNCLAIMED); 1849 } 1850 1851 /* acknowledge interrupts */ 1852 RT2860_WRITE(sc, RT2860_INT_STATUS, r); 1853 1854 if (r & RT2860_TX_COHERENT) 1855 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr()" 1856 "RT2860_TX_COHERENT\n"); 1857 1858 if (r & RT2860_RX_COHERENT) 1859 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr()" 1860 "RT2860_RX_COHERENT\n"); 1861 1862 if (r & RT2860_MAC_INT_2) { 1863 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1864 "RT2860_MAC_INT_2\n"); 1865 rt2860_drain_stats_fifo(sc); 1866 } 1867 1868 if (r & RT2860_TX_DONE_INT5) { 1869 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1870 "RT2860_TX_DONE_INT5\n"); 1871 rt2860_tx_intr(sc, 5); 1872 } 1873 1874 if (r & RT2860_RX_DONE_INT) { 1875 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr()" 1876 "RT2860_RX_INT\n"); 1877 sc->sc_rx_pend = 1; 1878 ddi_trigger_softintr(sc->sc_softintr_hdl); 1879 } 1880 1881 if (r & RT2860_TX_DONE_INT4) { 1882 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1883 "RT2860_TX_DONE_INT4\n"); 1884 rt2860_tx_intr(sc, 4); 1885 } 1886 1887 if (r & RT2860_TX_DONE_INT3) { 1888 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1889 "RT2860_TX_DONE_INT3\n"); 1890 rt2860_tx_intr(sc, 3); 1891 } 1892 1893 if (r & RT2860_TX_DONE_INT2) { 1894 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1895 "RT2860_TX_DONE_INT2\n"); 1896 rt2860_tx_intr(sc, 2); 1897 } 1898 1899 if (r & RT2860_TX_DONE_INT1) { 1900 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1901 "RT2860_TX_DONE_INT1\n"); 1902 rt2860_tx_intr(sc, 1); 1903 } 1904 1905 if (r & RT2860_TX_DONE_INT0) { 1906 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1907 "RT2860_TX_DONE_INT0\n"); 1908 rt2860_tx_intr(sc, 0); 1909 } 1910 1911 if (r & RT2860_MAC_INT_0) { 1912 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1913 "RT2860_MAC_INT_0\n"); 1914 struct ieee80211com *ic = &sc->sc_ic; 1915 /* check if protection mode has changed */ 1916 if ((sc->sc_ic_flags ^ ic->ic_flags) & IEEE80211_F_USEPROT) { 1917 rt2860_updateprot(ic); 1918 sc->sc_ic_flags = ic->ic_flags; 1919 } 1920 } 1921 1922 if (r & RT2860_MAC_INT_3) 1923 RWN_DEBUG(RT2860_DBG_INTR, "rwn: rt2860_intr(): " 1924 "RT2860_MAC_INT_3\n"); 1925 1926 RT2860_GUNLOCK(sc); 1927 1928 return (DDI_INTR_CLAIMED); 1929 } 1930 1931 static void 1932 rt2860_set_region_4(struct rt2860_softc *sc, 1933 uint32_t addr, uint32_t data, int size) 1934 { 1935 for (; size > 0; size--, data++, addr += 4) 1936 ddi_put32((sc)->sc_io_handle, 1937 (uint32_t *)((uintptr_t)(sc)->sc_io_base + addr), data); 1938 } 1939 1940 static int 1941 rt2860_load_microcode(struct rt2860_softc *sc) 1942 { 1943 int ntries; 1944 size_t size; 1945 uint8_t *ucode, *fptr; 1946 uint32_t off, i; 1947 1948 ucode = rt2860_fw_bin; 1949 size = sizeof (rt2860_fw_bin); 1950 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_load_microcode(): " 1951 "The size of ucode is: %x\n", size); 1952 1953 /* set "host program ram write selection" bit */ 1954 RT2860_WRITE(sc, RT2860_SYS_CTRL, RT2860_HST_PM_SEL); 1955 /* write microcode image */ 1956 fptr = ucode; 1957 off = RT2860_FW_BASE; 1958 for (i = 0; i < size; i++) { 1959 rt2860_mem_write1(sc, off++, *fptr++); 1960 } 1961 /* kick microcontroller unit */ 1962 RT2860_WRITE(sc, RT2860_SYS_CTRL, 0); 1963 RT2860_WRITE(sc, RT2860_SYS_CTRL, RT2860_MCU_RESET); 1964 1965 RT2860_WRITE(sc, RT2860_H2M_BBPAGENT, 0); 1966 RT2860_WRITE(sc, RT2860_H2M_MAILBOX, 0); 1967 1968 /* wait until microcontroller is ready */ 1969 for (ntries = 0; ntries < 1000; ntries++) { 1970 if (RT2860_READ(sc, RT2860_SYS_CTRL) & RT2860_MCU_READY) 1971 break; 1972 DELAY(1000); 1973 } 1974 if (ntries == 1000) { 1975 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_load_microcode(): " 1976 "timeout waiting for MCU to initialie\n"); 1977 return (ETIMEDOUT); 1978 } 1979 1980 return (0); 1981 } 1982 1983 static void 1984 rt2860_set_macaddr(struct rt2860_softc *sc, const uint8_t *addr) 1985 { 1986 RT2860_WRITE(sc, RT2860_MAC_ADDR_DW0, 1987 addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24); 1988 RT2860_WRITE(sc, RT2860_MAC_ADDR_DW1, 1989 addr[4] | addr[5] << 8); 1990 } 1991 1992 /* 1993 * Send a command to the 8051 microcontroller unit. 1994 */ 1995 static int 1996 rt2860_mcu_cmd(struct rt2860_softc *sc, uint8_t cmd, uint16_t arg) 1997 { 1998 int ntries; 1999 2000 for (ntries = 0; ntries < 100; ntries++) { 2001 if (!(RT2860_READ(sc, RT2860_H2M_MAILBOX) & RT2860_H2M_BUSY)) 2002 break; 2003 DELAY(2); 2004 } 2005 if (ntries == 100) 2006 return (EIO); 2007 2008 RT2860_WRITE(sc, RT2860_H2M_MAILBOX, 2009 RT2860_H2M_BUSY | RT2860_TOKEN_NO_INTR << 16 | arg); 2010 RT2860_WRITE(sc, RT2860_HOST_CMD, cmd); 2011 2012 return (RT2860_SUCCESS); 2013 } 2014 2015 /* 2016 * Reading and writing from/to the BBP is different from RT2560 and RT2661. 2017 * We access the BBP through the 8051 microcontroller unit which means that 2018 * the microcode must be loaded first. 2019 */ 2020 static uint8_t 2021 rt2860_mcu_bbp_read(struct rt2860_softc *sc, uint8_t reg) 2022 { 2023 uint32_t val; 2024 int ntries; 2025 2026 for (ntries = 0; ntries < 100; ntries++) { 2027 if (!(RT2860_READ(sc, 2028 RT2860_H2M_BBPAGENT) & RT2860_BBP_CSR_KICK)) 2029 break; 2030 DELAY(1); 2031 } 2032 if (ntries == 100) { 2033 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_mcu_bbp_read():" 2034 "could not read from BBP through MCU\n"); 2035 return (0); 2036 } 2037 2038 RT2860_WRITE(sc, RT2860_H2M_BBPAGENT, RT2860_BBP_RW_PARALLEL | 2039 RT2860_BBP_CSR_KICK | RT2860_BBP_CSR_READ | reg << 8); 2040 2041 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BBP, 0); 2042 DELAY(1000); 2043 2044 for (ntries = 0; ntries < 100; ntries++) { 2045 val = RT2860_READ(sc, RT2860_H2M_BBPAGENT); 2046 if (!(val & RT2860_BBP_CSR_KICK)) 2047 return (val & 0xff); 2048 DELAY(1); 2049 } 2050 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_mcu_bbp_read():" 2051 "could not read from BBP through MCU\n"); 2052 2053 return (0); 2054 } 2055 2056 static void 2057 rt2860_mcu_bbp_write(struct rt2860_softc *sc, uint8_t reg, uint8_t val) 2058 { 2059 int ntries; 2060 2061 for (ntries = 0; ntries < 100; ntries++) { 2062 if (!(RT2860_READ(sc, 2063 RT2860_H2M_BBPAGENT) & RT2860_BBP_CSR_KICK)) 2064 break; 2065 DELAY(1); 2066 } 2067 if (ntries == 100) { 2068 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_mcu_bbp_write():" 2069 "could not write to BBP through MCU\n"); 2070 return; 2071 } 2072 2073 RT2860_WRITE(sc, RT2860_H2M_BBPAGENT, RT2860_BBP_RW_PARALLEL | 2074 RT2860_BBP_CSR_KICK | reg << 8 | val); 2075 2076 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BBP, 0); 2077 DELAY(1000); 2078 } 2079 2080 static int 2081 rt2860_bbp_init(struct rt2860_softc *sc) 2082 { 2083 int i, ntries; 2084 2085 /* wait for BBP to wake up */ 2086 for (ntries = 0; ntries < 20; ntries++) { 2087 uint8_t bbp0 = rt2860_mcu_bbp_read(sc, 0); 2088 if (bbp0 != 0 && bbp0 != 0xff) 2089 break; 2090 } 2091 if (ntries == 20) { 2092 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_bbp_init():" 2093 "timeout waiting for BBP to wake up\n"); 2094 return (ETIMEDOUT); 2095 } 2096 2097 /* initialize BBP registers to default values */ 2098 for (i = 0; i < 12; i++) { 2099 rt2860_mcu_bbp_write(sc, rt2860_def_bbp[i].reg, 2100 rt2860_def_bbp[i].val); 2101 } 2102 2103 /* fix BBP69 and BBP73 for RT2860C */ 2104 if (sc->mac_rev == 0x28600100) { 2105 rt2860_mcu_bbp_write(sc, 69, 0x16); 2106 rt2860_mcu_bbp_write(sc, 73, 0x12); 2107 } 2108 2109 return (0); 2110 } 2111 2112 static void 2113 rt2860_rf_write(struct rt2860_softc *sc, uint8_t reg, uint32_t val) 2114 { 2115 uint32_t tmp; 2116 int ntries; 2117 2118 for (ntries = 0; ntries < 100; ntries++) { 2119 if (!(RT2860_READ(sc, RT2860_RF_CSR_CFG0) & RT2860_RF_REG_CTRL)) 2120 break; 2121 DELAY(1); 2122 } 2123 if (ntries == 100) { 2124 RWN_DEBUG(RT2860_DBG_FW, "rwn: rwn_init()" 2125 "could not write to RF\n"); 2126 return; 2127 } 2128 2129 /* RF registers are 24-bit on the RT2860 */ 2130 tmp = RT2860_RF_REG_CTRL | 24 << RT2860_RF_REG_WIDTH_SHIFT | 2131 (val & 0x3fffff) << 2 | (reg & 3); 2132 RT2860_WRITE(sc, RT2860_RF_CSR_CFG0, tmp); 2133 } 2134 2135 static void 2136 rt2860_select_chan_group(struct rt2860_softc *sc, int group) 2137 { 2138 uint32_t tmp; 2139 2140 rt2860_mcu_bbp_write(sc, 62, 0x37 - sc->lna[group]); 2141 rt2860_mcu_bbp_write(sc, 63, 0x37 - sc->lna[group]); 2142 rt2860_mcu_bbp_write(sc, 64, 0x37 - sc->lna[group]); 2143 rt2860_mcu_bbp_write(sc, 82, (group == 0) ? 0x62 : 0xf2); 2144 2145 tmp = RT2860_READ(sc, RT2860_TX_BAND_CFG); 2146 tmp &= ~(RT2860_5G_BAND_SEL_N | RT2860_5G_BAND_SEL_P); 2147 tmp |= (group == 0) ? RT2860_5G_BAND_SEL_N : RT2860_5G_BAND_SEL_P; 2148 RT2860_WRITE(sc, RT2860_TX_BAND_CFG, tmp); 2149 2150 /* enable appropriate Power Amplifiers and Low Noise Amplifiers */ 2151 tmp = RT2860_RFTR_EN | RT2860_TRSW_EN; 2152 if (group == 0) { /* 2GHz */ 2153 tmp |= RT2860_PA_PE_G0_EN | RT2860_LNA_PE_G0_EN; 2154 if (sc->ntxchains > 1) 2155 tmp |= RT2860_PA_PE_G1_EN; 2156 if (sc->nrxchains > 1) 2157 tmp |= RT2860_LNA_PE_G1_EN; 2158 } else { /* 5GHz */ 2159 tmp |= RT2860_PA_PE_A0_EN | RT2860_LNA_PE_A0_EN; 2160 if (sc->ntxchains > 1) 2161 tmp |= RT2860_PA_PE_A1_EN; 2162 if (sc->nrxchains > 1) 2163 tmp |= RT2860_LNA_PE_A1_EN; 2164 } 2165 RT2860_WRITE(sc, RT2860_TX_PIN_CFG, tmp); 2166 2167 rt2860_mcu_bbp_write(sc, 66, 0x2e + sc->lna[group]); 2168 } 2169 static void 2170 rt2860_set_chan(struct rt2860_softc *sc, struct ieee80211_channel *c) 2171 { 2172 struct ieee80211com *ic = &sc->sc_ic; 2173 const struct rfprog *rfprog = rt2860_rf2850; 2174 uint_t i, chan, group; 2175 uint8_t txpow1, txpow2; 2176 uint32_t r2, r3, r4; 2177 2178 chan = ieee80211_chan2ieee(ic, c); 2179 if (chan == 0 || chan == IEEE80211_CHAN_ANY) { 2180 RWN_DEBUG(RT2860_DBG_FW, "Unkonwn channel!\n"); 2181 return; 2182 } 2183 2184 /* find the settings for this channel (we know it exists) */ 2185 for (i = 0; rfprog[i].chan != chan; ) 2186 i++; 2187 2188 r2 = rfprog[i].r2; 2189 if (sc->ntxchains == 1) 2190 r2 |= 1 << 12; /* 1T: disable Tx chain 2 */ 2191 if (sc->nrxchains == 1) 2192 r2 |= 1 << 15 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ 2193 else if (sc->nrxchains == 2) 2194 r2 |= 1 << 4; /* 2R: disable Rx chain 3 */ 2195 2196 /* use Tx power values from EEPROM */ 2197 txpow1 = sc->txpow1[i]; 2198 txpow2 = sc->txpow2[i]; 2199 if (IEEE80211_IS_CHAN_5GHZ(c)) { 2200 txpow1 = txpow1 << 1 | 1; 2201 txpow2 = txpow2 << 1 | 1; 2202 } 2203 r3 = rfprog[i].r3 | txpow1 << 7; 2204 r4 = rfprog[i].r4 | sc->freq << 13 | txpow2 << 4; 2205 2206 rt2860_rf_write(sc, RAL_RF1, rfprog[i].r1); 2207 rt2860_rf_write(sc, RAL_RF2, r2); 2208 rt2860_rf_write(sc, RAL_RF3, r3); 2209 rt2860_rf_write(sc, RAL_RF4, r4); 2210 2211 DELAY(200); 2212 2213 rt2860_rf_write(sc, RAL_RF1, rfprog[i].r1); 2214 rt2860_rf_write(sc, RAL_RF2, r2); 2215 rt2860_rf_write(sc, RAL_RF3, r3 | 1); 2216 rt2860_rf_write(sc, RAL_RF4, r4); 2217 2218 DELAY(200); 2219 2220 rt2860_rf_write(sc, RAL_RF1, rfprog[i].r1); 2221 rt2860_rf_write(sc, RAL_RF2, r2); 2222 rt2860_rf_write(sc, RAL_RF3, r3); 2223 rt2860_rf_write(sc, RAL_RF4, r4); 2224 2225 /* 802.11a uses a 16 microseconds short interframe space */ 2226 sc->sifs = IEEE80211_IS_CHAN_5GHZ(c) ? 16 : 10; 2227 2228 /* determine channel group */ 2229 if (chan <= 14) 2230 group = 0; 2231 else if (chan <= 64) 2232 group = 1; 2233 else if (chan <= 128) 2234 group = 2; 2235 else 2236 group = 3; 2237 2238 /* XXX necessary only when group has changed! */ 2239 rt2860_select_chan_group(sc, group); 2240 2241 DELAY(1000); 2242 } 2243 2244 static void 2245 rt2860_updateprot(struct ieee80211com *ic) 2246 { 2247 struct rt2860_softc *sc = (struct rt2860_softc *)ic; 2248 uint32_t tmp; 2249 2250 tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT | RT2860_TXOP_ALLOW_ALL; 2251 /* setup protection frame rate (MCS code) */ 2252 tmp |= (ic->ic_curmode == IEEE80211_MODE_11A) ? 0 : 3; 2253 2254 /* CCK frames don't require protection */ 2255 RT2860_WRITE(sc, RT2860_CCK_PROT_CFG, tmp); 2256 2257 if (ic->ic_flags & IEEE80211_F_USEPROT) { 2258 if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) 2259 tmp |= RT2860_PROT_CTRL_RTS_CTS; 2260 else if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) 2261 tmp |= RT2860_PROT_CTRL_CTS; 2262 } 2263 RT2860_WRITE(sc, RT2860_OFDM_PROT_CFG, tmp); 2264 } 2265 2266 static void 2267 rt2860_set_leds(struct rt2860_softc *sc, uint16_t which) 2268 { 2269 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LEDS, 2270 which | (sc->leds & 0x7f)); 2271 } 2272 2273 static int 2274 rt2860_init(struct rt2860_softc *sc) 2275 { 2276 #define N(a) (sizeof (a) / sizeof ((a)[0])) 2277 struct ieee80211com *ic; 2278 int i, err, qid, ridx, ntries; 2279 uint8_t bbp1, bbp3; 2280 uint32_t tmp; 2281 2282 ic = &sc->sc_ic; 2283 2284 rt2860_stop(sc); 2285 tmp = RT2860_READ(sc, RT2860_WPDMA_GLO_CFG); 2286 tmp &= 0xff0; 2287 RT2860_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp | RT2860_TX_WB_DDONE); 2288 2289 RT2860_WRITE(sc, RT2860_WPDMA_RST_IDX, 0xffffffff); 2290 2291 /* PBF hardware reset */ 2292 RT2860_WRITE(sc, RT2860_SYS_CTRL, 0xe1f); 2293 RT2860_WRITE(sc, RT2860_SYS_CTRL, 0xe00); 2294 2295 if (!(sc->sc_flags & RT2860_FWLOADED)) { 2296 if ((err = rt2860_load_microcode(sc)) != 0) { 2297 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_init(): " 2298 "could not load 8051 microcode\n"); 2299 rt2860_stop(sc); 2300 return (err); 2301 } 2302 RT2860_GLOCK(sc); 2303 sc->sc_flags |= RT2860_FWLOADED; 2304 RT2860_GUNLOCK(sc); 2305 } 2306 2307 rt2860_set_macaddr(sc, ic->ic_macaddr); 2308 2309 /* init Tx power for all Tx rates (from EEPROM) */ 2310 for (ridx = 0; ridx < 5; ridx++) { 2311 if (sc->txpow20mhz[ridx] == 0xffffffff) 2312 continue; 2313 RT2860_WRITE(sc, RT2860_TX_PWR_CFG(ridx), sc->txpow20mhz[ridx]); 2314 } 2315 2316 for (ntries = 0; ntries < 100; ntries++) { 2317 tmp = RT2860_READ(sc, RT2860_WPDMA_GLO_CFG); 2318 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 2319 break; 2320 DELAY(1000); 2321 } 2322 if (ntries == 100) { 2323 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_init():" 2324 "timeout waiting for DMA engine\n"); 2325 rt2860_stop(sc); 2326 return (ETIMEDOUT); 2327 } 2328 tmp &= 0xff0; 2329 RT2860_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp | RT2860_TX_WB_DDONE); 2330 2331 /* reset Rx ring and all 6 Tx rings */ 2332 RT2860_WRITE(sc, RT2860_WPDMA_RST_IDX, 0x1003f); 2333 2334 /* PBF hardware reset */ 2335 RT2860_WRITE(sc, RT2860_SYS_CTRL, 0xe1f); 2336 RT2860_WRITE(sc, RT2860_SYS_CTRL, 0xe00); 2337 2338 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, 2339 RT2860_BBP_HRST | RT2860_MAC_SRST); 2340 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, 0); 2341 2342 for (i = 0; i < N(rt2860_def_mac); i++) 2343 RT2860_WRITE(sc, rt2860_def_mac[i].reg, rt2860_def_mac[i].val); 2344 2345 /* wait while MAC is busy */ 2346 for (ntries = 0; ntries < 100; ntries++) { 2347 if (!(RT2860_READ(sc, RT2860_MAC_STATUS_REG) & 2348 (RT2860_RX_STATUS_BUSY | RT2860_TX_STATUS_BUSY))) 2349 break; 2350 DELAY(1000); 2351 } 2352 if (ntries == 100) { 2353 RWN_DEBUG(RT2860_DBG_FW, "rwn: rt2860_init():" 2354 "timeout waiting for MAC\n"); 2355 rt2860_stop(sc); 2356 return (ETIMEDOUT); 2357 } 2358 2359 /* clear Host to MCU mailbox */ 2360 RT2860_WRITE(sc, RT2860_H2M_BBPAGENT, 0); 2361 RT2860_WRITE(sc, RT2860_H2M_MAILBOX, 0); 2362 2363 if ((err = rt2860_bbp_init(sc)) != 0) { 2364 rt2860_stop(sc); 2365 return (err); 2366 } 2367 2368 /* init Tx rings (4 EDCAs + HCCA + Mgt) */ 2369 for (qid = 0; qid < 6; qid++) { 2370 RT2860_WRITE(sc, RT2860_TX_BASE_PTR(qid), sc->txq[qid].paddr); 2371 RT2860_WRITE(sc, RT2860_TX_MAX_CNT(qid), RT2860_TX_RING_COUNT); 2372 RT2860_WRITE(sc, RT2860_TX_CTX_IDX(qid), 0); 2373 } 2374 2375 /* init Rx ring */ 2376 RT2860_WRITE(sc, RT2860_RX_BASE_PTR, sc->rxq.paddr); 2377 RT2860_WRITE(sc, RT2860_RX_MAX_CNT, RT2860_RX_RING_COUNT); 2378 RT2860_WRITE(sc, RT2860_RX_CALC_IDX, RT2860_RX_RING_COUNT - 1); 2379 2380 /* setup maximum buffer sizes */ 2381 RT2860_WRITE(sc, RT2860_MAX_LEN_CFG, 1 << 12 | 2382 (sc->sc_dmabuf_size - sizeof (struct rt2860_rxwi) - 2)); 2383 2384 for (ntries = 0; ntries < 100; ntries++) { 2385 tmp = RT2860_READ(sc, RT2860_WPDMA_GLO_CFG); 2386 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 2387 break; 2388 DELAY(1000); 2389 } 2390 if (ntries == 100) { 2391 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_init():" 2392 "timeout waiting for DMA engine\n"); 2393 rt2860_stop(sc); 2394 return (ETIMEDOUT); 2395 } 2396 tmp &= 0xff0; 2397 RT2860_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp | RT2860_TX_WB_DDONE); 2398 2399 /* disable interrupts mitigation */ 2400 RT2860_WRITE(sc, RT2860_DELAY_INT_CFG, 0); 2401 2402 /* write vendor-specific BBP values (from EEPROM) */ 2403 for (i = 0; i < 8; i++) { 2404 if (sc->bbp[i].reg == 0 || sc->bbp[i].reg == 0xff) 2405 continue; 2406 rt2860_mcu_bbp_write(sc, sc->bbp[i].reg, sc->bbp[i].val); 2407 } 2408 2409 /* send LEDs operating mode to microcontroller */ 2410 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED1, sc->led[0]); 2411 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED2, sc->led[1]); 2412 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED3, sc->led[2]); 2413 2414 /* disable non-existing Rx chains */ 2415 bbp3 = rt2860_mcu_bbp_read(sc, 3); 2416 bbp3 &= ~(1 << 3 | 1 << 4); 2417 if (sc->nrxchains == 2) 2418 bbp3 |= 1 << 3; 2419 else if (sc->nrxchains == 3) 2420 bbp3 |= 1 << 4; 2421 rt2860_mcu_bbp_write(sc, 3, bbp3); 2422 2423 /* disable non-existing Tx chains */ 2424 bbp1 = rt2860_mcu_bbp_read(sc, 1); 2425 if (sc->ntxchains == 1) 2426 bbp1 &= ~(1 << 3 | 1 << 4); 2427 rt2860_mcu_bbp_write(sc, 1, bbp1); 2428 2429 /* select default channel */ 2430 rt2860_set_chan(sc, ic->ic_curchan); 2431 2432 /* XXX not clear what the following 8051 command does.. */ 2433 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BOOT, 0); 2434 2435 /* set RTS threshold */ 2436 tmp = RT2860_READ(sc, RT2860_TX_RTS_CFG); 2437 tmp &= ~0xffff00; 2438 tmp |= ic->ic_rtsthreshold << 8; 2439 2440 /* setup initial protection mode */ 2441 sc->sc_ic_flags = ic->ic_flags; 2442 rt2860_updateprot(ic); 2443 2444 /* enable Tx/Rx DMA engine */ 2445 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_TX_EN); 2446 for (ntries = 0; ntries < 200; ntries++) { 2447 tmp = RT2860_READ(sc, RT2860_WPDMA_GLO_CFG); 2448 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 2449 break; 2450 DELAY(1000); 2451 } 2452 if (ntries == 200) { 2453 RWN_DEBUG(RT2860_DBG_DMA, "rwn: rt2860_int():" 2454 "timeout waiting for DMA engine\n"); 2455 rt2860_stop(sc); 2456 return (ETIMEDOUT); 2457 } 2458 2459 DELAY(50); 2460 2461 tmp |= RT2860_TX_WB_DDONE | RT2860_RX_DMA_EN | RT2860_TX_DMA_EN | 2462 RT2860_WPDMA_BT_SIZE64 << RT2860_WPDMA_BT_SIZE_SHIFT; 2463 RT2860_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp); 2464 2465 /* turn radio LED on */ 2466 rt2860_set_leds(sc, RT2860_LED_RADIO); 2467 2468 /* set Rx filter */ 2469 tmp = RT2860_DROP_CRC_ERR | RT2860_DROP_PHY_ERR; 2470 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2471 tmp |= RT2860_DROP_UC_NOME | RT2860_DROP_DUPL | 2472 RT2860_DROP_CTS | RT2860_DROP_BA | RT2860_DROP_ACK | 2473 RT2860_DROP_VER_ERR | RT2860_DROP_CTRL_RSV | 2474 RT2860_DROP_CFACK | RT2860_DROP_CFEND; 2475 if (ic->ic_opmode == IEEE80211_M_STA) 2476 tmp |= RT2860_DROP_RTS | RT2860_DROP_PSPOLL; 2477 } 2478 RT2860_WRITE(sc, RT2860_RX_FILTR_CFG, tmp); 2479 2480 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, 2481 RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 2482 2483 /* clear pending interrupts */ 2484 RT2860_WRITE(sc, RT2860_INT_STATUS, 0xffffffff); 2485 /* enable interrupts */ 2486 RT2860_WRITE(sc, RT2860_INT_MASK, 0x3fffc); 2487 2488 if (sc->sc_flags & RT2860_ADVANCED_PS) 2489 (void) rt2860_mcu_cmd(sc, RT2860_MCU_CMD_PSLEVEL, sc->pslevel); 2490 2491 return (DDI_SUCCESS); 2492 } 2493 2494 static int 2495 rt2860_quiesce(dev_info_t *dip) 2496 { 2497 struct rt2860_softc *sc; 2498 2499 sc = ddi_get_soft_state(rt2860_soft_state_p, ddi_get_instance(dip)); 2500 if (sc == NULL) 2501 return (DDI_FAILURE); 2502 2503 #ifdef DEBUG 2504 rt2860_dbg_flags = 0; 2505 #endif 2506 2507 /* 2508 * No more blocking is allowed while we are in quiesce(9E) entry point 2509 */ 2510 sc->sc_flags |= RT2860_F_QUIESCE; 2511 2512 /* 2513 * Disable and mask all interrupts 2514 */ 2515 rt2860_stop(sc); 2516 return (DDI_SUCCESS); 2517 } 2518 2519 static void 2520 rt2860_stop(struct rt2860_softc *sc) 2521 { 2522 int qid; 2523 uint32_t tmp; 2524 2525 /* by pass if it's quiesced */ 2526 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 2527 RT2860_GLOCK(sc); 2528 if (sc->sc_flags == RT2860_F_RUNNING) 2529 rt2860_set_leds(sc, 0); /* turn all LEDs off */ 2530 sc->sc_tx_timer = 0; 2531 /* by pass if it's quiesced */ 2532 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 2533 RT2860_GUNLOCK(sc); 2534 2535 /* clear RX WCID search table */ 2536 rt2860_set_region_4(sc, RT2860_WCID_ENTRY(0), 0, 512); 2537 /* clear pairwise key table */ 2538 rt2860_set_region_4(sc, RT2860_PKEY(0), 0, 2048); 2539 /* clear IV/EIV table */ 2540 rt2860_set_region_4(sc, RT2860_IVEIV(0), 0, 512); 2541 /* clear WCID attribute table */ 2542 rt2860_set_region_4(sc, RT2860_WCID_ATTR(0), 0, 256); 2543 /* clear shared key table */ 2544 rt2860_set_region_4(sc, RT2860_SKEY(0, 0), 0, 8 * 32); 2545 /* clear shared key mode */ 2546 rt2860_set_region_4(sc, RT2860_SKEY_MODE_0_7, 0, 4); 2547 2548 /* disable interrupts */ 2549 RT2860_WRITE(sc, RT2860_INT_MASK, 0); 2550 2551 /* disable Rx */ 2552 tmp = RT2860_READ(sc, RT2860_MAC_SYS_CTRL); 2553 tmp &= ~(RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 2554 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, tmp); 2555 2556 /* reset adapter */ 2557 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, 2558 RT2860_BBP_HRST | RT2860_MAC_SRST); 2559 RT2860_WRITE(sc, RT2860_MAC_SYS_CTRL, 0); 2560 2561 /* reset Tx and Rx rings (and reclaim TXWIs) */ 2562 for (qid = 0; qid < 6; qid++) 2563 rt2860_reset_tx_ring(sc, &sc->txq[qid]); 2564 rt2860_reset_rx_ring(sc, &sc->rxq); 2565 2566 /* by pass if it's quiesced */ 2567 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 2568 RT2860_GLOCK(sc); 2569 sc->sc_flags &= ~RT2860_UPD_BEACON; 2570 /* by pass if it's quiesced */ 2571 if (!(sc->sc_flags & RT2860_F_QUIESCE)) 2572 RT2860_GUNLOCK(sc); 2573 } 2574 2575 static int 2576 rt2860_m_start(void *arg) 2577 { 2578 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2579 struct ieee80211com *ic = &sc->sc_ic; 2580 int err; 2581 2582 err = rt2860_init(sc); 2583 if (err != DDI_SUCCESS) { 2584 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_m_start():" 2585 "Hardware initialization failed\n"); 2586 goto fail1; 2587 } 2588 2589 ieee80211_new_state(ic, IEEE80211_S_INIT, -1); 2590 2591 RT2860_GLOCK(sc); 2592 sc->sc_flags |= RT2860_F_RUNNING; 2593 RT2860_GUNLOCK(sc); 2594 2595 return (err); 2596 fail1: 2597 rt2860_stop(sc); 2598 return (err); 2599 } 2600 2601 static void 2602 rt2860_m_stop(void *arg) 2603 { 2604 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2605 2606 (void) rt2860_stop(sc); 2607 2608 ieee80211_new_state(&sc->sc_ic, IEEE80211_S_INIT, -1); 2609 2610 RT2860_GLOCK(sc); 2611 sc->sc_flags &= ~RT2860_F_RUNNING; 2612 RT2860_GUNLOCK(sc); 2613 } 2614 2615 static void 2616 rt2860_m_ioctl(void* arg, queue_t *wq, mblk_t *mp) 2617 { 2618 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2619 struct ieee80211com *ic = &sc->sc_ic; 2620 int err; 2621 2622 err = ieee80211_ioctl(ic, wq, mp); 2623 RT2860_GLOCK(sc); 2624 if (err == ENETRESET) { 2625 if (ic->ic_des_esslen) { 2626 if (RT2860_IS_RUNNING(sc)) { 2627 RT2860_GUNLOCK(sc); 2628 (void) rt2860_init(sc); 2629 (void) ieee80211_new_state(ic, 2630 IEEE80211_S_SCAN, -1); 2631 RT2860_GLOCK(sc); 2632 } 2633 } 2634 } 2635 RT2860_GUNLOCK(sc); 2636 } 2637 2638 /* 2639 * Call back function for get/set proporty 2640 */ 2641 static int 2642 rt2860_m_getprop(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, 2643 uint_t wldp_length, void *wldp_buf) 2644 { 2645 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2646 int err = 0; 2647 2648 err = ieee80211_getprop(&sc->sc_ic, pr_name, wldp_pr_num, 2649 wldp_length, wldp_buf); 2650 2651 return (err); 2652 } 2653 2654 static void 2655 rt2860_m_propinfo(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, 2656 mac_prop_info_handle_t prh) 2657 { 2658 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2659 2660 ieee80211_propinfo(&sc->sc_ic, pr_name, wldp_pr_num, prh); 2661 } 2662 2663 static int 2664 rt2860_m_setprop(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, 2665 uint_t wldp_length, const void *wldp_buf) 2666 { 2667 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2668 ieee80211com_t *ic = &sc->sc_ic; 2669 int err; 2670 2671 err = ieee80211_setprop(ic, pr_name, wldp_pr_num, wldp_length, 2672 wldp_buf); 2673 RT2860_GLOCK(sc); 2674 if (err == ENETRESET) { 2675 if (ic->ic_des_esslen) { 2676 if (RT2860_IS_RUNNING(sc)) { 2677 RT2860_GUNLOCK(sc); 2678 (void) rt2860_init(sc); 2679 (void) ieee80211_new_state(ic, 2680 IEEE80211_S_SCAN, -1); 2681 RT2860_GLOCK(sc); 2682 } 2683 } 2684 err = 0; 2685 } 2686 RT2860_GUNLOCK(sc); 2687 return (err); 2688 } 2689 2690 static mblk_t * 2691 rt2860_m_tx(void *arg, mblk_t *mp) 2692 { 2693 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2694 struct ieee80211com *ic = &sc->sc_ic; 2695 mblk_t *next; 2696 2697 if (RT2860_IS_SUSPEND(sc)) { 2698 freemsgchain(mp); 2699 return (NULL); 2700 } 2701 2702 /* 2703 * No data frames go out unless we're associated; this 2704 * should not happen as the 802.11 layer does not enable 2705 * the xmit queue until we enter the RUN state. 2706 */ 2707 if (ic->ic_state != IEEE80211_S_RUN) { 2708 RWN_DEBUG(RT2860_DBG_TX, "rwn: rt2860_tx_data(): " 2709 "discard, state %u\n", ic->ic_state); 2710 freemsgchain(mp); 2711 return (NULL); 2712 } 2713 2714 while (mp != NULL) { 2715 next = mp->b_next; 2716 mp->b_next = NULL; 2717 if (rt2860_send(ic, mp, IEEE80211_FC0_TYPE_DATA) != 2718 DDI_SUCCESS) { 2719 mp->b_next = next; 2720 break; 2721 } 2722 mp = next; 2723 } 2724 return (mp); 2725 } 2726 2727 /*ARGSUSED*/ 2728 static int 2729 rt2860_m_unicst(void *arg, const uint8_t *macaddr) 2730 { 2731 return (ENOTSUP); 2732 } 2733 2734 /*ARGSUSED*/ 2735 static int 2736 rt2860_m_multicst(void *arg, boolean_t add, const uint8_t *mca) 2737 { 2738 return (ENOTSUP); 2739 } 2740 2741 /*ARGSUSED*/ 2742 static int 2743 rt2860_m_promisc(void *arg, boolean_t on) 2744 { 2745 return (0); 2746 } 2747 2748 static int 2749 rt2860_m_stat(void *arg, uint_t stat, uint64_t *val) 2750 { 2751 struct rt2860_softc *sc = (struct rt2860_softc *)arg; 2752 ieee80211com_t *ic = &sc->sc_ic; 2753 ieee80211_node_t *ni = ic->ic_bss; 2754 struct ieee80211_rateset *rs = &ni->in_rates; 2755 2756 RT2860_GLOCK(sc); 2757 switch (stat) { 2758 case MAC_STAT_IFSPEED: 2759 *val = ((ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE) ? 2760 (rs->ir_rates[ni->in_txrate] & IEEE80211_RATE_VAL) 2761 : ic->ic_fixed_rate) / 2 * 1000000; 2762 break; 2763 case MAC_STAT_NOXMTBUF: 2764 *val = sc->sc_tx_nobuf; 2765 break; 2766 case MAC_STAT_NORCVBUF: 2767 *val = sc->sc_rx_nobuf; 2768 break; 2769 case MAC_STAT_IERRORS: 2770 *val = sc->sc_rx_err; 2771 break; 2772 case MAC_STAT_RBYTES: 2773 *val = ic->ic_stats.is_rx_bytes; 2774 break; 2775 case MAC_STAT_IPACKETS: 2776 *val = ic->ic_stats.is_rx_frags; 2777 break; 2778 case MAC_STAT_OBYTES: 2779 *val = ic->ic_stats.is_tx_bytes; 2780 break; 2781 case MAC_STAT_OPACKETS: 2782 *val = ic->ic_stats.is_tx_frags; 2783 break; 2784 case MAC_STAT_OERRORS: 2785 case WIFI_STAT_TX_FAILED: 2786 *val = sc->sc_tx_err; 2787 break; 2788 case WIFI_STAT_TX_RETRANS: 2789 *val = sc->sc_tx_retries; 2790 break; 2791 case WIFI_STAT_FCS_ERRORS: 2792 case WIFI_STAT_WEP_ERRORS: 2793 case WIFI_STAT_TX_FRAGS: 2794 case WIFI_STAT_MCAST_TX: 2795 case WIFI_STAT_RTS_SUCCESS: 2796 case WIFI_STAT_RTS_FAILURE: 2797 case WIFI_STAT_ACK_FAILURE: 2798 case WIFI_STAT_RX_FRAGS: 2799 case WIFI_STAT_MCAST_RX: 2800 case WIFI_STAT_RX_DUPS: 2801 RT2860_GUNLOCK(sc); 2802 return (ieee80211_stat(ic, stat, val)); 2803 default: 2804 RT2860_GUNLOCK(sc); 2805 return (ENOTSUP); 2806 } 2807 RT2860_GUNLOCK(sc); 2808 2809 return (0); 2810 } 2811 2812 static int 2813 rt2860_attach(dev_info_t *devinfo, ddi_attach_cmd_t cmd) 2814 { 2815 struct rt2860_softc *sc; 2816 struct ieee80211com *ic; 2817 int i, err, qid, ntries, instance; 2818 uint8_t cachelsz; 2819 uint16_t command, vendor_id, device_id; 2820 char strbuf[32]; 2821 wifi_data_t wd = { 0 }; 2822 mac_register_t *macp; 2823 2824 switch (cmd) { 2825 case DDI_ATTACH: 2826 break; 2827 case DDI_RESUME: 2828 sc = ddi_get_soft_state(rt2860_soft_state_p, 2829 ddi_get_instance(devinfo)); 2830 ASSERT(sc != NULL); 2831 RT2860_GLOCK(sc); 2832 sc->sc_flags &= ~RT2860_F_SUSPEND; 2833 RT2860_GUNLOCK(sc); 2834 if (RT2860_IS_RUNNING(sc)) 2835 (void) rt2860_init(sc); 2836 RWN_DEBUG(RT2860_DBG_RESUME, "rwn: rt2860_attach(): " 2837 "resume now\n"); 2838 return (DDI_SUCCESS); 2839 default: 2840 return (DDI_FAILURE); 2841 } 2842 2843 instance = ddi_get_instance(devinfo); 2844 2845 err = ddi_soft_state_zalloc(rt2860_soft_state_p, instance); 2846 if (err != DDI_SUCCESS) { 2847 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2848 "unable to alloc soft_state_p\n"); 2849 return (err); 2850 } 2851 2852 sc = ddi_get_soft_state(rt2860_soft_state_p, instance); 2853 ic = (ieee80211com_t *)&sc->sc_ic; 2854 sc->sc_dev = devinfo; 2855 2856 /* pci configuration */ 2857 err = ddi_regs_map_setup(devinfo, 0, &sc->sc_cfg_base, 0, 0, 2858 &rwn_csr_accattr, &sc->sc_cfg_handle); 2859 if (err != DDI_SUCCESS) { 2860 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2861 "ddi_regs_map_setup() failed"); 2862 goto fail1; 2863 } 2864 2865 cachelsz = ddi_get8(sc->sc_cfg_handle, 2866 (uint8_t *)(sc->sc_cfg_base + PCI_CONF_CACHE_LINESZ)); 2867 if (cachelsz == 0) 2868 cachelsz = 0x10; 2869 sc->sc_cachelsz = cachelsz << 2; 2870 sc->sc_dmabuf_size = roundup(IEEE80211_MAX_LEN, sc->sc_cachelsz); 2871 2872 vendor_id = ddi_get16(sc->sc_cfg_handle, 2873 (uint16_t *)((uintptr_t)(sc->sc_cfg_base) + PCI_CONF_VENID)); 2874 device_id = ddi_get16(sc->sc_cfg_handle, 2875 (uint16_t *)((uintptr_t)(sc->sc_cfg_base) + PCI_CONF_DEVID)); 2876 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2877 "vendor 0x%x, device id 0x%x, cache size %d\n", 2878 vendor_id, device_id, cachelsz); 2879 2880 /* 2881 * Enable response to memory space accesses, 2882 * and enabe bus master. 2883 */ 2884 command = PCI_COMM_MAE | PCI_COMM_ME; 2885 ddi_put16(sc->sc_cfg_handle, 2886 (uint16_t *)((uintptr_t)(sc->sc_cfg_base) + PCI_CONF_COMM), 2887 command); 2888 ddi_put8(sc->sc_cfg_handle, 2889 (uint8_t *)(sc->sc_cfg_base + PCI_CONF_LATENCY_TIMER), 0xa8); 2890 ddi_put8(sc->sc_cfg_handle, 2891 (uint8_t *)(sc->sc_cfg_base + PCI_CONF_ILINE), 0x10); 2892 2893 /* pci i/o space */ 2894 err = ddi_regs_map_setup(devinfo, 1, 2895 &sc->sc_io_base, 0, 0, &rwn_csr_accattr, &sc->sc_io_handle); 2896 if (err != DDI_SUCCESS) { 2897 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2898 "ddi_regs_map_setup() failed"); 2899 goto fail2; 2900 } 2901 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2902 "PCI configuration is done successfully\n"); 2903 2904 sc->amrr.amrr_min_success_threshold = 1; 2905 sc->amrr.amrr_max_success_threshold = 15; 2906 2907 /* wait for NIC to initialize */ 2908 for (ntries = 0; ntries < 100; ntries++) { 2909 sc->mac_rev = RT2860_READ(sc, RT2860_ASIC_VER_ID); 2910 if (sc->mac_rev != 0 && sc->mac_rev != 0xffffffff) 2911 break; 2912 DELAY(10); 2913 } 2914 if (ntries == 100) { 2915 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2916 "timeout waiting for NIC initialize\n"); 2917 return (DDI_FAILURE); 2918 } 2919 2920 if ((sc->mac_rev >> 16) != 0x2860 && 2921 (device_id == PRODUCT_RALINK_RT2890 || 2922 device_id == PRODUCT_RALINK_RT2790 || 2923 device_id == PRODUCT_AWT_RT2890)) 2924 sc->sc_flags |= RT2860_ADVANCED_PS; 2925 2926 /* retrieve RF rev. no and various other things from EEPROM */ 2927 (void) rt2860_read_eeprom(sc); 2928 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2929 "MAC/BBP RT%X (rev 0x%04X), RF %s (%dT%dR)\n", 2930 sc->mac_rev >> 16, sc->mac_rev & 0xffff, 2931 rt2860_get_rf(sc->rf_rev), sc->ntxchains, sc->nrxchains); 2932 2933 /* 2934 * Allocate Tx (4 EDCAs + HCCA + Mgt) and Rx rings. 2935 */ 2936 for (qid = 0; qid < 6; qid++) { 2937 if ((err = rt2860_alloc_tx_ring(sc, &sc->txq[qid])) != 0) { 2938 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2939 "could not allocate Tx ring %d\n", qid); 2940 goto fail3; 2941 } 2942 } 2943 2944 if ((err = rt2860_alloc_rx_ring(sc, &sc->rxq)) != 0) { 2945 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2946 "could not allocte Rx ring\n"); 2947 goto fail4; 2948 } 2949 2950 if ((err = rt2860_alloc_tx_pool(sc)) != 0) { 2951 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 2952 "could not allocte Tx pool\n"); 2953 goto fail5; 2954 } 2955 2956 mutex_init(&sc->sc_genlock, NULL, MUTEX_DRIVER, NULL); 2957 mutex_init(&sc->sc_txlock, NULL, MUTEX_DRIVER, NULL); 2958 mutex_init(&sc->sc_rxlock, NULL, MUTEX_DRIVER, NULL); 2959 2960 /* mgmt ring is broken on RT2860C, use EDCA AC VO ring instead */ 2961 sc->mgtqid = (sc->mac_rev == 0x28600100) ? EDCA_AC_VO : 5; 2962 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach():" 2963 "mgtqid = %x\n", sc->mgtqid); 2964 2965 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 2966 ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ 2967 ic->ic_state = IEEE80211_S_INIT; 2968 2969 /* set device capabilities */ 2970 ic->ic_caps = 2971 IEEE80211_C_TXPMGT | /* tx power management */ 2972 IEEE80211_C_SHPREAMBLE | /* short preamble supported */ 2973 IEEE80211_C_SHSLOT; /* short slot time supported */ 2974 2975 /* WPA/WPA2 support */ 2976 ic->ic_caps |= IEEE80211_C_WPA; /* Support WPA/WPA2 */ 2977 2978 /* set supported .11b and .11g rates */ 2979 ic->ic_sup_rates[IEEE80211_MODE_11B] = rt2860_rateset_11b; 2980 ic->ic_sup_rates[IEEE80211_MODE_11G] = rt2860_rateset_11g; 2981 2982 /* set supported .11b and .11g channels (1 through 14) */ 2983 for (i = 1; i <= 14; i++) { 2984 ic->ic_sup_channels[i].ich_freq = 2985 ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ); 2986 ic->ic_sup_channels[i].ich_flags = 2987 IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | 2988 IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ; 2989 } 2990 2991 ic->ic_maxrssi = 63; 2992 ic->ic_xmit = rt2860_send; 2993 2994 ieee80211_attach(ic); 2995 2996 /* register WPA door */ 2997 ieee80211_register_door(ic, ddi_driver_name(devinfo), 2998 ddi_get_instance(devinfo)); 2999 3000 /* override state transition machine */ 3001 sc->sc_newstate = ic->ic_newstate; 3002 ic->ic_newstate = rt2860_newstate; 3003 ieee80211_media_init(ic); 3004 ic->ic_def_txkey = 0; 3005 3006 err = ddi_add_softintr(devinfo, DDI_SOFTINT_LOW, 3007 &sc->sc_softintr_hdl, NULL, 0, rt2860_softintr, (caddr_t)sc); 3008 if (err != DDI_SUCCESS) { 3009 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 3010 "ddi_add_softintr() failed"); 3011 goto fail8; 3012 } 3013 3014 err = ddi_get_iblock_cookie(devinfo, 0, &sc->sc_iblock); 3015 if (err != DDI_SUCCESS) { 3016 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 3017 "Can not get iblock cookie for INT\n"); 3018 goto fail7; 3019 } 3020 3021 err = ddi_add_intr(devinfo, 0, NULL, NULL, rt2860_intr, (caddr_t)sc); 3022 if (err != DDI_SUCCESS) { 3023 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 3024 "unable to add device interrupt handler\n"); 3025 goto fail7; 3026 } 3027 3028 /* 3029 * Provide initial settings for the WiFi plugin; whenever this 3030 * information changes, we need to call mac_plugindata_update() 3031 */ 3032 wd.wd_opmode = ic->ic_opmode; 3033 wd.wd_secalloc = WIFI_SEC_NONE; 3034 IEEE80211_ADDR_COPY(wd.wd_bssid, ic->ic_bss->in_bssid); 3035 3036 if ((macp = mac_alloc(MAC_VERSION)) == NULL) { 3037 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 3038 "MAC version mismatch\n"); 3039 goto fail9; 3040 } 3041 3042 macp->m_type_ident = MAC_PLUGIN_IDENT_WIFI; 3043 macp->m_driver = sc; 3044 macp->m_dip = devinfo; 3045 macp->m_src_addr = ic->ic_macaddr; 3046 macp->m_callbacks = &rt2860_m_callbacks; 3047 macp->m_min_sdu = 0; 3048 macp->m_max_sdu = IEEE80211_MTU; 3049 macp->m_pdata = &wd; 3050 macp->m_pdata_size = sizeof (wd); 3051 3052 err = mac_register(macp, &ic->ic_mach); 3053 mac_free(macp); 3054 if (err != 0) { 3055 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach(): " 3056 "mac_register err %x\n", err); 3057 goto fail9; 3058 } 3059 3060 /* 3061 * Create minor node of type DDI_NT_NET_WIFI 3062 */ 3063 (void) snprintf(strbuf, sizeof (strbuf), "%s%d", 3064 "rwn", instance); 3065 err = ddi_create_minor_node(devinfo, strbuf, S_IFCHR, 3066 instance + 1, DDI_NT_NET_WIFI, 0); 3067 3068 /* 3069 * Notify link is down now 3070 */ 3071 mac_link_update(ic->ic_mach, LINK_STATE_DOWN); 3072 3073 sc->sc_flags &= ~RT2860_F_RUNNING; 3074 3075 RWN_DEBUG(RT2860_DBG_MSG, "rwn: rt2860_attach() successfully.\n"); 3076 return (DDI_SUCCESS); 3077 fail9: 3078 ddi_remove_softintr(sc->sc_softintr_hdl); 3079 fail8: 3080 ddi_remove_intr(devinfo, 0, sc->sc_iblock); 3081 fail7: 3082 mutex_destroy(&sc->sc_genlock); 3083 mutex_destroy(&sc->sc_txlock); 3084 mutex_destroy(&sc->sc_rxlock); 3085 fail6: 3086 rt2860_free_tx_pool(sc); 3087 fail5: 3088 rt2860_free_rx_ring(sc, &sc->rxq); 3089 fail4: 3090 while (--qid >= 0) 3091 rt2860_free_tx_ring(sc, &sc->txq[qid]); 3092 fail3: 3093 ddi_regs_map_free(&sc->sc_io_handle); 3094 fail2: 3095 ddi_regs_map_free(&sc->sc_cfg_handle); 3096 fail1: 3097 return (err); 3098 } 3099 3100 static int 3101 rt2860_detach(dev_info_t *devinfo, ddi_detach_cmd_t cmd) 3102 { 3103 struct rt2860_softc *sc; 3104 int qid; 3105 3106 sc = ddi_get_soft_state(rt2860_soft_state_p, ddi_get_instance(devinfo)); 3107 3108 switch (cmd) { 3109 case DDI_DETACH: 3110 break; 3111 case DDI_SUSPEND: 3112 if (RT2860_IS_RUNNING(sc)) 3113 rt2860_stop(sc); 3114 RT2860_GLOCK(sc); 3115 sc->sc_flags &= ~RT2860_FWLOADED; 3116 sc->sc_flags |= RT2860_F_SUSPEND; 3117 RT2860_GUNLOCK(sc); 3118 RWN_DEBUG(RT2860_DBG_RESUME, "rwn: rt2860_detach(): " 3119 "suspend now\n"); 3120 return (DDI_SUCCESS); 3121 default: 3122 return (DDI_FAILURE); 3123 } 3124 3125 if (mac_disable(sc->sc_ic.ic_mach) != 0) 3126 return (DDI_FAILURE); 3127 3128 rt2860_stop(sc); 3129 3130 /* 3131 * Unregister from the MAC layer subsystem 3132 */ 3133 (void) mac_unregister(sc->sc_ic.ic_mach); 3134 3135 ddi_remove_intr(devinfo, 0, sc->sc_iblock); 3136 ddi_remove_softintr(sc->sc_softintr_hdl); 3137 3138 /* 3139 * detach ieee80211 layer 3140 */ 3141 ieee80211_detach(&sc->sc_ic); 3142 3143 rt2860_free_tx_pool(sc); 3144 rt2860_free_rx_ring(sc, &sc->rxq); 3145 for (qid = 0; qid < 6; qid++) 3146 rt2860_free_tx_ring(sc, &sc->txq[qid]); 3147 3148 ddi_regs_map_free(&sc->sc_io_handle); 3149 3150 mutex_destroy(&sc->sc_genlock); 3151 mutex_destroy(&sc->sc_txlock); 3152 mutex_destroy(&sc->sc_rxlock); 3153 3154 ddi_remove_minor_node(devinfo, NULL); 3155 ddi_soft_state_free(rt2860_soft_state_p, ddi_get_instance(devinfo)); 3156 3157 return (DDI_SUCCESS); 3158 } 3159 3160 int 3161 _info(struct modinfo *modinfop) 3162 { 3163 return (mod_info(&modlinkage, modinfop)); 3164 } 3165 3166 int 3167 _init(void) 3168 { 3169 int status; 3170 3171 status = ddi_soft_state_init(&rt2860_soft_state_p, 3172 sizeof (struct rt2860_softc), 1); 3173 if (status != 0) 3174 return (status); 3175 3176 mac_init_ops(&rwn_dev_ops, "rwn"); 3177 status = mod_install(&modlinkage); 3178 if (status != 0) { 3179 mac_fini_ops(&rwn_dev_ops); 3180 ddi_soft_state_fini(&rt2860_soft_state_p); 3181 } 3182 return (status); 3183 } 3184 3185 int 3186 _fini(void) 3187 { 3188 int status; 3189 3190 status = mod_remove(&modlinkage); 3191 if (status == 0) { 3192 mac_fini_ops(&rwn_dev_ops); 3193 ddi_soft_state_fini(&rt2860_soft_state_p); 3194 } 3195 return (status); 3196 } 3197