xref: /illumos-gate/usr/src/uts/common/io/ptm.c (revision 63f91fbc3c024870d86dc3332a4a0080fb29bc40)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright (c) 1988, 2010, Oracle and/or its affiliates. All rights reserved.
23  */
24 /*	Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T	*/
25 /*	  All Rights Reserved	*/
26 
27 /*
28  * Copyright 2020 OmniOS Community Edition (OmniOSce) Association.
29  * Copyright 2021 Oxide Computer Company
30  */
31 
32 /*
33  * PSEUDO-TERMINAL MANAGER DRIVER (PTM)
34  *
35  * The pseudo-terminal subsystem simulates a terminal connection, where the
36  * manager side represents the terminal and the subsidiary represents the user
37  * process's special device end point.  The manager device is set up as a
38  * cloned device where its major device number is the major for the clone
39  * device and its minor device number is the major for the ptm driver.  There
40  * are no nodes in the file system for manager devices.  The manager pseudo
41  * driver is opened using the open(2) system call with /dev/ptmx as the device
42  * parameter.  The clone open finds the next available minor device for the ptm
43  * major device.
44  *
45  * A manager device is available only if it and its corresponding subsidiary
46  * device are not already open.  When the manager device is opened, the
47  * corresponding subsidiary device is automatically locked out.  Only one open
48  * is allowed on a manager device.  Multiple opens are allowed on the
49  * subsidiary device.  After both the manager and subsidiary have been opened,
50  * the user has two file descriptors which are the end points of a full duplex
51  * connection composed of two streams which are automatically connected at the
52  * manager and subsidiary drivers.  The user may then push modules onto either
53  * side of the stream pair.
54  *
55  * The manager and subsidiary drivers pass all messages to their adjacent
56  * queues.  Only the M_FLUSH needs some processing.  Because the read queue of
57  * one side is connected to the write queue of the other, the FLUSHR flag is
58  * changed to the FLUSHW flag and vice versa.  When the manager device is
59  * closed an M_HANGUP message is sent to the subsidiary device which will
60  * render the device unusable.  The process on the subsidiary side gets an EIO
61  * error when attempting to write on that stream but it will be able to read
62  * any data remaining on the stream head read queue.  When all the data has
63  * been read, read() returns 0 indicating that the stream can no longer be
64  * used.  On the last close of the subsidiary device, a 0-length message is
65  * sent to the manager device.  When the application on the manager side issues
66  * a read() or getmsg() and 0 is returned, the user of the manager device
67  * decides whether to issue a close() that dismantles the pseudo-terminal
68  * subsystem.  If the manager device is not closed, the pseudo-terminal
69  * subsystem will be available to another user to open the subsidiary device.
70  *
71  * If O_NONBLOCK or O_NDELAY is set, read on the manager side returns -1 with
72  * errno set to EAGAIN if no data is available, and write returns -1 with errno
73  * set to EAGAIN if there is internal flow control.
74  *
75  *
76  * IOCTLS
77  *
78  *	ISPTM
79  *		Determines whether the file descriptor is that of an open
80  *		manager device.  Return code of zero indicates that the file
81  *		descriptor represents a manager device.
82  *
83  *	UNLKPT
84  *		Unlocks the manager and subsidiary devices.  It returns 0 on
85  *		success. On failure, the errno is set to EINVAL indicating that
86  *		the manager device is not open.
87  *
88  *	ZONEPT
89  *		Sets the zone membership of the associated subsidiary device.
90  *
91  *	GRPPT
92  *		Sets the group owner of the associated subsidiary device.
93  *
94  *
95  * SYNCHRONIZATION
96  *
97  * All global data synchronization between ptm/pts is done via global ptms_lock
98  * mutex which is initialized at system boot time from ptms_initspace (called
99  * from space.c).
100  *
101  * Individual fields of pt_ttys structure (except ptm_rdq, pts_rdq and
102  * pt_nullmsg) are protected by pt_ttys.pt_lock mutex.
103  *
104  * PT_ENTER_READ/PT_ENTER_WRITE are reference counter based read-write locks
105  * which allow reader locks to be reacquired by the same thread (usual
106  * reader/writer locks can't be used for that purpose since it is illegal for a
107  * thread to acquire a lock it already holds, even as a reader). The sole
108  * purpose of these macros is to guarantee that the peer queue will not
109  * disappear (due to closing peer) while it is used. It is safe to use
110  * PT_ENTER_READ/PT_EXIT_READ brackets across calls like putq/putnext (since
111  * they are not real locks but reference counts).
112  *
113  * PT_ENTER_WRITE/PT_EXIT_WRITE brackets are used ONLY in manager/subsidiary
114  * open/close paths to modify ptm_rdq and pts_rdq fields. These fields should
115  * be set to appropriate queues *after* qprocson() is called during open (to
116  * prevent peer from accessing the queue with incomplete plumbing) and set to
117  * NULL before qprocsoff() is called during close.
118  *
119  * The pt_nullmsg field is only used in open/close routines and it is also
120  * protected by PT_ENTER_WRITE/PT_EXIT_WRITE brackets to avoid extra mutex
121  * holds.
122  *
123  *
124  * LOCK ORDERING
125  *
126  * If both ptms_lock and per-pty lock should be held, ptms_lock should always
127  * be entered first, followed by per-pty lock.
128  *
129  * See ptms.h, pts.c, and ptms_conf.c for more information.
130  */
131 
132 #include <sys/types.h>
133 #include <sys/param.h>
134 #include <sys/file.h>
135 #include <sys/sysmacros.h>
136 #include <sys/stream.h>
137 #include <sys/stropts.h>
138 #include <sys/proc.h>
139 #include <sys/errno.h>
140 #include <sys/debug.h>
141 #include <sys/cmn_err.h>
142 #include <sys/ptms.h>
143 #include <sys/stat.h>
144 #include <sys/strsun.h>
145 #include <sys/systm.h>
146 #include <sys/modctl.h>
147 #include <sys/conf.h>
148 #include <sys/ddi.h>
149 #include <sys/sunddi.h>
150 #include <sys/zone.h>
151 
152 #ifdef DEBUG
153 int ptm_debug = 0;
154 #define	DBG(a)	 if (ptm_debug) cmn_err(CE_NOTE, a)
155 #else
156 #define	DBG(a)
157 #endif
158 
159 static int ptmopen(queue_t *, dev_t *, int, int, cred_t *);
160 static int ptmclose(queue_t *, int, cred_t *);
161 static int ptmwput(queue_t *, mblk_t *);
162 static int ptmrsrv(queue_t *);
163 static int ptmwsrv(queue_t *);
164 
165 static struct module_info ptm_info = {
166 	0xdead,
167 	"ptm",
168 	0,
169 	512,
170 	512,
171 	128
172 };
173 
174 static struct qinit ptmrint = {
175 	NULL,
176 	ptmrsrv,
177 	ptmopen,
178 	ptmclose,
179 	NULL,
180 	&ptm_info,
181 	NULL
182 };
183 
184 static struct qinit ptmwint = {
185 	ptmwput,
186 	ptmwsrv,
187 	NULL,
188 	NULL,
189 	NULL,
190 	&ptm_info,
191 	NULL
192 };
193 
194 static struct streamtab ptminfo = {
195 	&ptmrint,
196 	&ptmwint,
197 	NULL,
198 	NULL
199 };
200 
201 static int ptm_attach(dev_info_t *, ddi_attach_cmd_t);
202 static int ptm_detach(dev_info_t *, ddi_detach_cmd_t);
203 static int ptm_devinfo(dev_info_t *, ddi_info_cmd_t, void *, void **);
204 
205 static dev_info_t	*ptm_dip;		/* private devinfo pointer */
206 
207 /*
208  * this will define (struct cb_ops cb_ptm_ops) and (struct dev_ops ptm_ops)
209  */
210 DDI_DEFINE_STREAM_OPS(ptm_ops, nulldev, nulldev, ptm_attach, ptm_detach,
211     nodev, ptm_devinfo, D_MP, &ptminfo, ddi_quiesce_not_supported);
212 
213 /*
214  * Module linkage information for the kernel.
215  */
216 
217 static struct modldrv modldrv = {
218 	&mod_driverops,
219 	"Pseudo-Terminal Manager Driver",
220 	&ptm_ops,
221 };
222 
223 static struct modlinkage modlinkage = {
224 	MODREV_1,
225 	&modldrv,
226 	NULL
227 };
228 
229 int
230 _init(void)
231 {
232 	int rc;
233 
234 	if ((rc = mod_install(&modlinkage)) == 0)
235 		ptms_init();
236 	return (rc);
237 }
238 
239 int
240 _fini(void)
241 {
242 	return (mod_remove(&modlinkage));
243 }
244 
245 int
246 _info(struct modinfo *modinfop)
247 {
248 	return (mod_info(&modlinkage, modinfop));
249 }
250 
251 static int
252 ptm_attach(dev_info_t *devi, ddi_attach_cmd_t cmd)
253 {
254 	if (cmd != DDI_ATTACH)
255 		return (DDI_FAILURE);
256 
257 	if (ddi_create_minor_node(devi, "ptmajor", S_IFCHR,
258 	    0, DDI_PSEUDO, 0) == DDI_FAILURE) {
259 		ddi_remove_minor_node(devi, NULL);
260 		return (DDI_FAILURE);
261 	}
262 	if (ddi_create_minor_node(devi, "ptmx", S_IFCHR,
263 	    0, DDI_PSEUDO, CLONE_DEV) == DDI_FAILURE) {
264 		ddi_remove_minor_node(devi, NULL);
265 		return (DDI_FAILURE);
266 	}
267 	ptm_dip = devi;
268 
269 	return (DDI_SUCCESS);
270 }
271 
272 static int
273 ptm_detach(dev_info_t *devi, ddi_detach_cmd_t cmd)
274 {
275 	if (cmd != DDI_DETACH)
276 		return (DDI_FAILURE);
277 
278 	ddi_remove_minor_node(devi, NULL);
279 	return (DDI_SUCCESS);
280 }
281 
282 static int
283 ptm_devinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg,
284     void **result)
285 {
286 	int error;
287 
288 	switch (infocmd) {
289 	case DDI_INFO_DEVT2DEVINFO:
290 		if (ptm_dip == NULL) {
291 			error = DDI_FAILURE;
292 		} else {
293 			*result = (void *)ptm_dip;
294 			error = DDI_SUCCESS;
295 		}
296 		break;
297 	case DDI_INFO_DEVT2INSTANCE:
298 		*result = (void *)0;
299 		error = DDI_SUCCESS;
300 		break;
301 	default:
302 		error = DDI_FAILURE;
303 	}
304 	return (error);
305 }
306 
307 
308 /*
309  * Open a minor of the manager device. Store the write queue pointer and set
310  * the pt_state field to (PTMOPEN | PTLOCK).
311  * This code will work properly with both clone opens and direct opens of the
312  * manager device.
313  */
314 static int
315 ptmopen(
316 	queue_t *rqp,		/* pointer to the read side queue */
317 	dev_t   *devp,		/* pointer to stream tail's dev */
318 	int	oflag,		/* the user open(2) supplied flags */
319 	int	sflag,		/* open state flag */
320 	cred_t  *credp)		/* credentials */
321 {
322 	struct pt_ttys	*ptmp;
323 	mblk_t		*mop;		/* ptr to a setopts message block */
324 	struct stroptions *sop;
325 	minor_t		dminor = getminor(*devp);
326 
327 	/* Allow reopen */
328 	if (rqp->q_ptr != NULL)
329 		return (0);
330 
331 	if (sflag & MODOPEN)
332 		return (ENXIO);
333 
334 	if (!(sflag & CLONEOPEN) && dminor != 0) {
335 		/*
336 		 * This is a direct open to specific manager device through an
337 		 * artificially created entry with specific minor in
338 		 * /dev/directory.  Such behavior is not supported.
339 		 */
340 		return (ENXIO);
341 	}
342 
343 	/*
344 	 * The manager open requires that the subsidiary be attached before it
345 	 * returns so that attempts to open the subsidiary will succeeed
346 	 */
347 	if (ptms_attach_subsidiary() != 0) {
348 		return (ENXIO);
349 	}
350 
351 	mop = allocb(sizeof (struct stroptions), BPRI_MED);
352 	if (mop == NULL) {
353 		DDBG("ptmopen(): mop allocation failed\n", 0);
354 		return (ENOMEM);
355 	}
356 
357 	if ((ptmp = pt_ttys_alloc()) == NULL) {
358 		DDBG("ptmopen(): pty allocation failed\n", 0);
359 		freemsg(mop);
360 		return (ENOMEM);
361 	}
362 
363 	dminor = ptmp->pt_minor;
364 
365 	DDBGP("ptmopen(): allocated ptmp %p\n", (uintptr_t)ptmp);
366 	DDBG("ptmopen(): allocated minor %d\n", dminor);
367 
368 	WR(rqp)->q_ptr = rqp->q_ptr = ptmp;
369 
370 	qprocson(rqp);
371 
372 	/* Allow subsidiary to send messages to manager */
373 	PT_ENTER_WRITE(ptmp);
374 	ptmp->ptm_rdq = rqp;
375 	PT_EXIT_WRITE(ptmp);
376 
377 	/*
378 	 * set up hi/lo water marks on stream head read queue
379 	 * and add controlling tty if not set
380 	 */
381 	mop->b_datap->db_type = M_SETOPTS;
382 	mop->b_wptr += sizeof (struct stroptions);
383 	sop = (struct stroptions *)mop->b_rptr;
384 	if (oflag & FNOCTTY)
385 		sop->so_flags = SO_HIWAT | SO_LOWAT;
386 	else
387 		sop->so_flags = SO_HIWAT | SO_LOWAT | SO_ISTTY;
388 	sop->so_hiwat = _TTY_BUFSIZ;
389 	sop->so_lowat = 256;
390 	putnext(rqp, mop);
391 
392 	/*
393 	 * The input, devp, is a major device number, the output is put
394 	 * into the same parm as a major,minor pair.
395 	 */
396 	*devp = makedevice(getmajor(*devp), dminor);
397 
398 	return (0);
399 }
400 
401 
402 /*
403  * Find the address to private data identifying the subsidiary's write queue.
404  * Send a hang-up message up the subsidiary's read queue to designate the
405  * manager/subsidiary pair is tearing down. Uattach the manager and subsidiary
406  * by nulling out the write queue fields in the private data structure.
407  * Finally, unlock the manager/subsidiary pair and mark the manager as closed.
408  */
409 static int
410 ptmclose(queue_t *rqp, int flag, cred_t *credp)
411 {
412 	struct pt_ttys	*ptmp;
413 	queue_t *pts_rdq;
414 
415 	ASSERT(rqp->q_ptr);
416 
417 	ptmp = (struct pt_ttys *)rqp->q_ptr;
418 	PT_ENTER_READ(ptmp);
419 	if (ptmp->pts_rdq) {
420 		pts_rdq = ptmp->pts_rdq;
421 		if (pts_rdq->q_next) {
422 			DBG(("send hangup message to subsidiary\n"));
423 			(void) putnextctl(pts_rdq, M_HANGUP);
424 		}
425 	}
426 	PT_EXIT_READ(ptmp);
427 	/*
428 	 * ptm_rdq should be cleared before call to qprocsoff() to prevent pts
429 	 * write procedure to attempt using ptm_rdq after qprocsoff.
430 	 */
431 	PT_ENTER_WRITE(ptmp);
432 	ptmp->ptm_rdq = NULL;
433 	freemsg(ptmp->pt_nullmsg);
434 	ptmp->pt_nullmsg = NULL;
435 	/*
436 	 * qenable subsidiary side write queue so that it can flush
437 	 * its messages as manager's read queue is going away
438 	 */
439 	if (ptmp->pts_rdq)
440 		qenable(WR(ptmp->pts_rdq));
441 	PT_EXIT_WRITE(ptmp);
442 
443 	qprocsoff(rqp);
444 
445 	/* Finish the close */
446 	rqp->q_ptr = NULL;
447 	WR(rqp)->q_ptr = NULL;
448 
449 	ptms_close(ptmp, PTMOPEN | PTLOCK);
450 
451 	return (0);
452 }
453 
454 /*
455  * The wput procedure will only handle ioctl and flush messages.
456  */
457 static int
458 ptmwput(queue_t *qp, mblk_t *mp)
459 {
460 	struct pt_ttys	*ptmp;
461 	struct iocblk	*iocp;
462 
463 	DBG(("entering ptmwput\n"));
464 	ASSERT(qp->q_ptr);
465 
466 	ptmp = (struct pt_ttys *)qp->q_ptr;
467 	PT_ENTER_READ(ptmp);
468 
469 	switch (mp->b_datap->db_type) {
470 	/*
471 	 * If this is a write queue request, flush manager's write queue and
472 	 * send FLUSHR up subsidiary side.  If it is a read queue request,
473 	 * convert to FLUSHW and putnext().
474 	 */
475 	case M_FLUSH:
476 		{
477 			unsigned char flush_flg = 0;
478 
479 			DBG(("ptm got flush request\n"));
480 			if (*mp->b_rptr & FLUSHW) {
481 				DBG(("got FLUSHW, flush ptm write Q\n"));
482 				if (*mp->b_rptr & FLUSHBAND) {
483 					/*
484 					 * if it is a FLUSHBAND, do flushband.
485 					 */
486 					flushband(qp, *(mp->b_rptr + 1),
487 					    FLUSHDATA);
488 				} else {
489 					flushq(qp, FLUSHDATA);
490 				}
491 				flush_flg = (*mp->b_rptr & ~FLUSHW) | FLUSHR;
492 			}
493 			if (*mp->b_rptr & FLUSHR) {
494 				DBG(("got FLUSHR, set FLUSHW\n"));
495 				flush_flg |= (*mp->b_rptr & ~FLUSHR) | FLUSHW;
496 			}
497 			if (flush_flg != 0 && ptmp->pts_rdq &&
498 			    !(ptmp->pt_state & PTLOCK)) {
499 				DBG(("putnext to pts\n"));
500 				*mp->b_rptr = flush_flg;
501 				putnext(ptmp->pts_rdq, mp);
502 			} else {
503 				freemsg(mp);
504 			}
505 			break;
506 		}
507 
508 	case M_IOCTL:
509 		iocp = (struct iocblk *)mp->b_rptr;
510 		switch (iocp->ioc_cmd) {
511 		default:
512 			if ((ptmp->pt_state & PTLOCK) ||
513 			    (ptmp->pts_rdq == NULL)) {
514 				DBG(("got M_IOCTL but no subsidiary\n"));
515 				miocnak(qp, mp, 0, EINVAL);
516 				PT_EXIT_READ(ptmp);
517 				return (0);
518 			}
519 			(void) putq(qp, mp);
520 			break;
521 		case UNLKPT:
522 			mutex_enter(&ptmp->pt_lock);
523 			ptmp->pt_state &= ~PTLOCK;
524 			mutex_exit(&ptmp->pt_lock);
525 			/*FALLTHROUGH*/
526 		case ISPTM:
527 			DBG(("ack the UNLKPT/ISPTM\n"));
528 			miocack(qp, mp, 0, 0);
529 			break;
530 		case PTSSTTY:
531 			mutex_enter(&ptmp->pt_lock);
532 			ptmp->pt_state |= PTSTTY;
533 			mutex_exit(&ptmp->pt_lock);
534 			DBG(("ack PTSSTTY\n"));
535 			miocack(qp, mp, 0, 0);
536 			break;
537 		case ZONEPT:
538 		{
539 			zoneid_t z;
540 			int error;
541 
542 			if ((error = drv_priv(iocp->ioc_cr)) != 0) {
543 				miocnak(qp, mp, 0, error);
544 				break;
545 			}
546 			if ((error = miocpullup(mp, sizeof (zoneid_t))) != 0) {
547 				miocnak(qp, mp, 0, error);
548 				break;
549 			}
550 			z = *((zoneid_t *)mp->b_cont->b_rptr);
551 			if (z < MIN_ZONEID || z > MAX_ZONEID) {
552 				miocnak(qp, mp, 0, EINVAL);
553 				break;
554 			}
555 
556 			mutex_enter(&ptmp->pt_lock);
557 			ptmp->pt_zoneid = z;
558 			mutex_exit(&ptmp->pt_lock);
559 			miocack(qp, mp, 0, 0);
560 			break;
561 		}
562 		case OWNERPT:
563 		{
564 			pt_own_t *ptop;
565 			int error;
566 			zone_t *zone;
567 
568 			if ((error = miocpullup(mp, sizeof (pt_own_t))) != 0) {
569 				miocnak(qp, mp, 0, error);
570 				break;
571 			}
572 
573 			zone = zone_find_by_id(ptmp->pt_zoneid);
574 			ptop = (pt_own_t *)mp->b_cont->b_rptr;
575 
576 			if (!VALID_UID(ptop->pto_ruid, zone) ||
577 			    !VALID_GID(ptop->pto_rgid, zone)) {
578 				zone_rele(zone);
579 				miocnak(qp, mp, 0, EINVAL);
580 				break;
581 			}
582 			zone_rele(zone);
583 			mutex_enter(&ptmp->pt_lock);
584 			ptmp->pt_ruid = ptop->pto_ruid;
585 			ptmp->pt_rgid = ptop->pto_rgid;
586 			mutex_exit(&ptmp->pt_lock);
587 			miocack(qp, mp, 0, 0);
588 			break;
589 		}
590 		}
591 		break;
592 
593 	case M_READ:
594 		/* Caused by ldterm - can not pass to subsidiary */
595 		freemsg(mp);
596 		break;
597 
598 	/*
599 	 * Send other messages to the subsidiary:
600 	 */
601 	default:
602 		if ((ptmp->pt_state & PTLOCK) || (ptmp->pts_rdq == NULL)) {
603 			DBG(("got msg. but no subsidiary\n"));
604 			mp = mexchange(NULL, mp, 2, M_ERROR, -1);
605 			if (mp != NULL) {
606 				mp->b_rptr[0] = NOERROR;
607 				mp->b_rptr[1] = EINVAL;
608 				qreply(qp, mp);
609 			}
610 			PT_EXIT_READ(ptmp);
611 			return (0);
612 		}
613 		DBG(("put msg on manager's write queue\n"));
614 		(void) putq(qp, mp);
615 		break;
616 	}
617 	DBG(("return from ptmwput()\n"));
618 	PT_EXIT_READ(ptmp);
619 	return (0);
620 }
621 
622 
623 /*
624  * Enable the write side of the subsidiary.  This triggers the subsidiary to
625  * send any messages queued on its write side to the read side of this manager.
626  */
627 static int
628 ptmrsrv(queue_t *qp)
629 {
630 	struct pt_ttys	*ptmp;
631 
632 	DBG(("entering ptmrsrv\n"));
633 	ASSERT(qp->q_ptr);
634 
635 	ptmp = (struct pt_ttys *)qp->q_ptr;
636 	PT_ENTER_READ(ptmp);
637 	if (ptmp->pts_rdq) {
638 		qenable(WR(ptmp->pts_rdq));
639 	}
640 	PT_EXIT_READ(ptmp);
641 	DBG(("leaving ptmrsrv\n"));
642 	return (0);
643 }
644 
645 
646 /*
647  * If there are messages on this queue that can be sent to subsidiary, send
648  * them via putnext().  Otherwise, if queued messages cannot be sent, leave
649  * them on this queue.  If priority messages on this queue, send them to the
650  * subsidiary no matter what.
651  */
652 static int
653 ptmwsrv(queue_t *qp)
654 {
655 	struct pt_ttys	*ptmp;
656 	mblk_t		*mp;
657 
658 	DBG(("entering ptmwsrv\n"));
659 	ASSERT(qp->q_ptr);
660 
661 	ptmp = (struct pt_ttys *)qp->q_ptr;
662 
663 	if ((mp = getq(qp)) == NULL) {
664 		/* If there are no messages there's nothing to do. */
665 		DBG(("leaving ptmwsrv (no messages)\n"));
666 		return (0);
667 	}
668 
669 	PT_ENTER_READ(ptmp);
670 	if ((ptmp->pt_state  & PTLOCK) || (ptmp->pts_rdq == NULL)) {
671 		DBG(("in manager write srv proc but no subsidiary\n"));
672 		/*
673 		 * Free messages on the write queue and send
674 		 * NAK for any M_IOCTL type messages to wakeup
675 		 * the user process waiting for ACK/NAK from
676 		 * the ioctl invocation
677 		 */
678 		do {
679 			if (mp->b_datap->db_type == M_IOCTL)
680 				miocnak(qp, mp, 0, EINVAL);
681 			else
682 				freemsg(mp);
683 		} while ((mp = getq(qp)) != NULL);
684 		flushq(qp, FLUSHALL);
685 
686 		mp = mexchange(NULL, NULL, 2, M_ERROR, -1);
687 		if (mp != NULL) {
688 			mp->b_rptr[0] = NOERROR;
689 			mp->b_rptr[1] = EINVAL;
690 			qreply(qp, mp);
691 		}
692 		PT_EXIT_READ(ptmp);
693 		return (0);
694 	}
695 	/*
696 	 * While there are messages on this write queue...
697 	 */
698 	do {
699 		/*
700 		 * If this is not a control message, and we cannot put messages
701 		 * on the subsidiary's read queue, put it back on this queue.
702 		 */
703 		if (mp->b_datap->db_type <= QPCTL &&
704 		    !bcanputnext(ptmp->pts_rdq, mp->b_band)) {
705 			DBG(("put msg. back on queue\n"));
706 			(void) putbq(qp, mp);
707 			break;
708 		}
709 		/*
710 		 * Otherwise send the message up subsidiary's stream
711 		 */
712 		DBG(("send message to subsidiary\n"));
713 		putnext(ptmp->pts_rdq, mp);
714 	} while ((mp = getq(qp)) != NULL);
715 	DBG(("leaving ptmwsrv\n"));
716 	PT_EXIT_READ(ptmp);
717 	return (0);
718 }
719