1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (c) 1988, 2010, Oracle and/or its affiliates. All rights reserved. 23 */ 24 /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */ 25 /* All Rights Reserved */ 26 27 28 29 /* 30 * Pseudo Terminal Master Driver. 31 * 32 * The pseudo-tty subsystem simulates a terminal connection, where the master 33 * side represents the terminal and the slave represents the user process's 34 * special device end point. The master device is set up as a cloned device 35 * where its major device number is the major for the clone device and its minor 36 * device number is the major for the ptm driver. There are no nodes in the file 37 * system for master devices. The master pseudo driver is opened using the 38 * open(2) system call with /dev/ptmx as the device parameter. The clone open 39 * finds the next available minor device for the ptm major device. 40 * 41 * A master device is available only if it and its corresponding slave device 42 * are not already open. When the master device is opened, the corresponding 43 * slave device is automatically locked out. Only one open is allowed on a 44 * master device. Multiple opens are allowed on the slave device. After both 45 * the master and slave have been opened, the user has two file descriptors 46 * which are the end points of a full duplex connection composed of two streams 47 * which are automatically connected at the master and slave drivers. The user 48 * may then push modules onto either side of the stream pair. 49 * 50 * The master and slave drivers pass all messages to their adjacent queues. 51 * Only the M_FLUSH needs some processing. Because the read queue of one side 52 * is connected to the write queue of the other, the FLUSHR flag is changed to 53 * the FLUSHW flag and vice versa. When the master device is closed an M_HANGUP 54 * message is sent to the slave device which will render the device 55 * unusable. The process on the slave side gets the EIO when attempting to write 56 * on that stream but it will be able to read any data remaining on the stream 57 * head read queue. When all the data has been read, read() returns 0 58 * indicating that the stream can no longer be used. On the last close of the 59 * slave device, a 0-length message is sent to the master device. When the 60 * application on the master side issues a read() or getmsg() and 0 is returned, 61 * the user of the master device decides whether to issue a close() that 62 * dismantles the pseudo-terminal subsystem. If the master device is not closed, 63 * the pseudo-tty subsystem will be available to another user to open the slave 64 * device. 65 * 66 * If O_NONBLOCK or O_NDELAY is set, read on the master side returns -1 with 67 * errno set to EAGAIN if no data is available, and write returns -1 with errno 68 * set to EAGAIN if there is internal flow control. 69 * 70 * IOCTLS: 71 * 72 * ISPTM: determines whether the file descriptor is that of an open master 73 * device. Return code of zero indicates that the file descriptor 74 * represents master device. 75 * 76 * UNLKPT: unlocks the master and slave devices. It returns 0 on success. On 77 * failure, the errno is set to EINVAL indicating that the master 78 * device is not open. 79 * 80 * ZONEPT: sets the zone membership of the associated pts device. 81 * 82 * GRPPT: sets the group owner of the associated pts device. 83 * 84 * Synchronization: 85 * 86 * All global data synchronization between ptm/pts is done via global 87 * ptms_lock mutex which is initialized at system boot time from 88 * ptms_initspace (called from space.c). 89 * 90 * Individual fields of pt_ttys structure (except ptm_rdq, pts_rdq and 91 * pt_nullmsg) are protected by pt_ttys.pt_lock mutex. 92 * 93 * PT_ENTER_READ/PT_ENTER_WRITE are reference counter based read-write locks 94 * which allow reader locks to be reacquired by the same thread (usual 95 * reader/writer locks can't be used for that purpose since it is illegal for 96 * a thread to acquire a lock it already holds, even as a reader). The sole 97 * purpose of these macros is to guarantee that the peer queue will not 98 * disappear (due to closing peer) while it is used. It is safe to use 99 * PT_ENTER_READ/PT_EXIT_READ brackets across calls like putq/putnext (since 100 * they are not real locks but reference counts). 101 * 102 * PT_ENTER_WRITE/PT_EXIT_WRITE brackets are used ONLY in master/slave 103 * open/close paths to modify ptm_rdq and pts_rdq fields. These fields should 104 * be set to appropriate queues *after* qprocson() is called during open (to 105 * prevent peer from accessing the queue with incomplete plumbing) and set to 106 * NULL before qprocsoff() is called during close. 107 * 108 * The pt_nullmsg field is only used in open/close routines and it is also 109 * protected by PT_ENTER_WRITE/PT_EXIT_WRITE brackets to avoid extra mutex 110 * holds. 111 * 112 * Lock Ordering: 113 * 114 * If both ptms_lock and per-pty lock should be held, ptms_lock should always 115 * be entered first, followed by per-pty lock. 116 * 117 * See ptms.h, pts.c and ptms_conf.c for more information. 118 */ 119 120 #include <sys/types.h> 121 #include <sys/param.h> 122 #include <sys/file.h> 123 #include <sys/sysmacros.h> 124 #include <sys/stream.h> 125 #include <sys/stropts.h> 126 #include <sys/proc.h> 127 #include <sys/errno.h> 128 #include <sys/debug.h> 129 #include <sys/cmn_err.h> 130 #include <sys/ptms.h> 131 #include <sys/stat.h> 132 #include <sys/strsun.h> 133 #include <sys/systm.h> 134 #include <sys/modctl.h> 135 #include <sys/conf.h> 136 #include <sys/ddi.h> 137 #include <sys/sunddi.h> 138 #include <sys/zone.h> 139 140 #ifdef DEBUG 141 int ptm_debug = 0; 142 #define DBG(a) if (ptm_debug) cmn_err(CE_NOTE, a) 143 #else 144 #define DBG(a) 145 #endif 146 147 static int ptmopen(queue_t *, dev_t *, int, int, cred_t *); 148 static int ptmclose(queue_t *, int, cred_t *); 149 static void ptmwput(queue_t *, mblk_t *); 150 static void ptmrsrv(queue_t *); 151 static void ptmwsrv(queue_t *); 152 153 /* 154 * Master Stream Pseudo Terminal Module: stream data structure definitions 155 */ 156 157 static struct module_info ptm_info = { 158 0xdead, 159 "ptm", 160 0, 161 512, 162 512, 163 128 164 }; 165 166 static struct qinit ptmrint = { 167 NULL, 168 (int (*)()) ptmrsrv, 169 ptmopen, 170 ptmclose, 171 NULL, 172 &ptm_info, 173 NULL 174 }; 175 176 static struct qinit ptmwint = { 177 (int (*)()) ptmwput, 178 (int (*)()) ptmwsrv, 179 NULL, 180 NULL, 181 NULL, 182 &ptm_info, 183 NULL 184 }; 185 186 static struct streamtab ptminfo = { 187 &ptmrint, 188 &ptmwint, 189 NULL, 190 NULL 191 }; 192 193 static int ptm_attach(dev_info_t *, ddi_attach_cmd_t); 194 static int ptm_detach(dev_info_t *, ddi_detach_cmd_t); 195 static int ptm_devinfo(dev_info_t *, ddi_info_cmd_t, void *, void **); 196 197 static dev_info_t *ptm_dip; /* private devinfo pointer */ 198 199 /* 200 * this will define (struct cb_ops cb_ptm_ops) and (struct dev_ops ptm_ops) 201 */ 202 DDI_DEFINE_STREAM_OPS(ptm_ops, nulldev, nulldev, ptm_attach, ptm_detach, 203 nodev, ptm_devinfo, D_MP, &ptminfo, ddi_quiesce_not_supported); 204 205 /* 206 * Module linkage information for the kernel. 207 */ 208 209 static struct modldrv modldrv = { 210 &mod_driverops, /* Type of module. This one is a pseudo driver */ 211 "Master streams driver 'ptm'", 212 &ptm_ops, /* driver ops */ 213 }; 214 215 static struct modlinkage modlinkage = { 216 MODREV_1, 217 &modldrv, 218 NULL 219 }; 220 221 int 222 _init(void) 223 { 224 int rc; 225 226 if ((rc = mod_install(&modlinkage)) == 0) 227 ptms_init(); 228 return (rc); 229 } 230 231 int 232 _fini(void) 233 { 234 return (mod_remove(&modlinkage)); 235 } 236 237 int 238 _info(struct modinfo *modinfop) 239 { 240 return (mod_info(&modlinkage, modinfop)); 241 } 242 243 static int 244 ptm_attach(dev_info_t *devi, ddi_attach_cmd_t cmd) 245 { 246 if (cmd != DDI_ATTACH) 247 return (DDI_FAILURE); 248 249 if (ddi_create_minor_node(devi, "ptmajor", S_IFCHR, 250 0, DDI_PSEUDO, NULL) == DDI_FAILURE) { 251 ddi_remove_minor_node(devi, NULL); 252 return (DDI_FAILURE); 253 } 254 if (ddi_create_minor_node(devi, "ptmx", S_IFCHR, 255 0, DDI_PSEUDO, CLONE_DEV) == DDI_FAILURE) { 256 ddi_remove_minor_node(devi, NULL); 257 return (DDI_FAILURE); 258 } 259 ptm_dip = devi; 260 261 return (DDI_SUCCESS); 262 } 263 264 static int 265 ptm_detach(dev_info_t *devi, ddi_detach_cmd_t cmd) 266 { 267 if (cmd != DDI_DETACH) 268 return (DDI_FAILURE); 269 270 ddi_remove_minor_node(devi, NULL); 271 return (DDI_SUCCESS); 272 } 273 274 /*ARGSUSED*/ 275 static int 276 ptm_devinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, 277 void **result) 278 { 279 int error; 280 281 switch (infocmd) { 282 case DDI_INFO_DEVT2DEVINFO: 283 if (ptm_dip == NULL) { 284 error = DDI_FAILURE; 285 } else { 286 *result = (void *)ptm_dip; 287 error = DDI_SUCCESS; 288 } 289 break; 290 case DDI_INFO_DEVT2INSTANCE: 291 *result = (void *)0; 292 error = DDI_SUCCESS; 293 break; 294 default: 295 error = DDI_FAILURE; 296 } 297 return (error); 298 } 299 300 301 /* ARGSUSED */ 302 /* 303 * Open a minor of the master device. Store the write queue pointer and set the 304 * pt_state field to (PTMOPEN | PTLOCK). 305 * This code will work properly with both clone opens and direct opens of the 306 * master device. 307 */ 308 static int 309 ptmopen( 310 queue_t *rqp, /* pointer to the read side queue */ 311 dev_t *devp, /* pointer to stream tail's dev */ 312 int oflag, /* the user open(2) supplied flags */ 313 int sflag, /* open state flag */ 314 cred_t *credp) /* credentials */ 315 { 316 struct pt_ttys *ptmp; 317 mblk_t *mop; /* ptr to a setopts message block */ 318 struct stroptions *sop; 319 minor_t dminor = getminor(*devp); 320 321 /* Allow reopen */ 322 if (rqp->q_ptr != NULL) 323 return (0); 324 325 if (sflag & MODOPEN) 326 return (ENXIO); 327 328 if (!(sflag & CLONEOPEN) && dminor != 0) { 329 /* 330 * This is a direct open to specific master device through an 331 * artificially created entry with specific minor in 332 * /dev/directory. Such behavior is not supported. 333 */ 334 return (ENXIO); 335 } 336 337 /* 338 * The master open requires that the slave be attached 339 * before it returns so that attempts to open the slave will 340 * succeeed 341 */ 342 if (ptms_attach_slave() != 0) { 343 return (ENXIO); 344 } 345 346 mop = allocb(sizeof (struct stroptions), BPRI_MED); 347 if (mop == NULL) { 348 DDBG("ptmopen(): mop allocation failed\n", 0); 349 return (ENOMEM); 350 } 351 352 if ((ptmp = pt_ttys_alloc()) == NULL) { 353 DDBG("ptmopen(): pty allocation failed\n", 0); 354 freemsg(mop); 355 return (ENOMEM); 356 } 357 358 dminor = ptmp->pt_minor; 359 360 DDBGP("ptmopen(): allocated ptmp %p\n", (uintptr_t)ptmp); 361 DDBG("ptmopen(): allocated minor %d\n", dminor); 362 363 WR(rqp)->q_ptr = rqp->q_ptr = ptmp; 364 365 qprocson(rqp); 366 367 /* Allow slave to send messages to master */ 368 PT_ENTER_WRITE(ptmp); 369 ptmp->ptm_rdq = rqp; 370 PT_EXIT_WRITE(ptmp); 371 372 /* 373 * set up hi/lo water marks on stream head read queue 374 * and add controlling tty if not set 375 */ 376 mop->b_datap->db_type = M_SETOPTS; 377 mop->b_wptr += sizeof (struct stroptions); 378 sop = (struct stroptions *)mop->b_rptr; 379 if (oflag & FNOCTTY) 380 sop->so_flags = SO_HIWAT | SO_LOWAT; 381 else 382 sop->so_flags = SO_HIWAT | SO_LOWAT | SO_ISTTY; 383 sop->so_hiwat = _TTY_BUFSIZ; 384 sop->so_lowat = 256; 385 putnext(rqp, mop); 386 387 /* 388 * The input, devp, is a major device number, the output is put 389 * into the same parm as a major,minor pair. 390 */ 391 *devp = makedevice(getmajor(*devp), dminor); 392 393 return (0); 394 } 395 396 397 /* 398 * Find the address to private data identifying the slave's write queue. 399 * Send a hang-up message up the slave's read queue to designate the 400 * master/slave pair is tearing down. Uattach the master and slave by 401 * nulling out the write queue fields in the private data structure. 402 * Finally, unlock the master/slave pair and mark the master as closed. 403 */ 404 /*ARGSUSED1*/ 405 static int 406 ptmclose(queue_t *rqp, int flag, cred_t *credp) 407 { 408 struct pt_ttys *ptmp; 409 queue_t *pts_rdq; 410 411 ASSERT(rqp->q_ptr); 412 413 ptmp = (struct pt_ttys *)rqp->q_ptr; 414 PT_ENTER_READ(ptmp); 415 if (ptmp->pts_rdq) { 416 pts_rdq = ptmp->pts_rdq; 417 if (pts_rdq->q_next) { 418 DBG(("send hangup message to slave\n")); 419 (void) putnextctl(pts_rdq, M_HANGUP); 420 } 421 } 422 PT_EXIT_READ(ptmp); 423 /* 424 * ptm_rdq should be cleared before call to qprocsoff() to prevent pts 425 * write procedure to attempt using ptm_rdq after qprocsoff. 426 */ 427 PT_ENTER_WRITE(ptmp); 428 ptmp->ptm_rdq = NULL; 429 freemsg(ptmp->pt_nullmsg); 430 ptmp->pt_nullmsg = NULL; 431 /* 432 * qenable slave side write queue so that it can flush 433 * its messages as master's read queue is going away 434 */ 435 if (ptmp->pts_rdq) 436 qenable(WR(ptmp->pts_rdq)); 437 PT_EXIT_WRITE(ptmp); 438 439 qprocsoff(rqp); 440 441 /* Finish the close */ 442 rqp->q_ptr = NULL; 443 WR(rqp)->q_ptr = NULL; 444 445 ptms_close(ptmp, PTMOPEN | PTLOCK); 446 447 return (0); 448 } 449 450 /* 451 * The wput procedure will only handle ioctl and flush messages. 452 */ 453 static void 454 ptmwput(queue_t *qp, mblk_t *mp) 455 { 456 struct pt_ttys *ptmp; 457 struct iocblk *iocp; 458 459 DBG(("entering ptmwput\n")); 460 ASSERT(qp->q_ptr); 461 462 ptmp = (struct pt_ttys *)qp->q_ptr; 463 PT_ENTER_READ(ptmp); 464 465 switch (mp->b_datap->db_type) { 466 /* 467 * if write queue request, flush master's write 468 * queue and send FLUSHR up slave side. If read 469 * queue request, convert to FLUSHW and putnext(). 470 */ 471 case M_FLUSH: 472 { 473 unsigned char flush_flg = 0; 474 475 DBG(("ptm got flush request\n")); 476 if (*mp->b_rptr & FLUSHW) { 477 DBG(("got FLUSHW, flush ptm write Q\n")); 478 if (*mp->b_rptr & FLUSHBAND) 479 /* 480 * if it is a FLUSHBAND, do flushband. 481 */ 482 flushband(qp, *(mp->b_rptr + 1), 483 FLUSHDATA); 484 else 485 flushq(qp, FLUSHDATA); 486 flush_flg = (*mp->b_rptr & ~FLUSHW) | FLUSHR; 487 } 488 if (*mp->b_rptr & FLUSHR) { 489 DBG(("got FLUSHR, set FLUSHW\n")); 490 flush_flg |= (*mp->b_rptr & ~FLUSHR) | FLUSHW; 491 } 492 if (flush_flg != 0 && ptmp->pts_rdq && 493 !(ptmp->pt_state & PTLOCK)) { 494 DBG(("putnext to pts\n")); 495 *mp->b_rptr = flush_flg; 496 putnext(ptmp->pts_rdq, mp); 497 } else 498 freemsg(mp); 499 break; 500 } 501 502 case M_IOCTL: 503 iocp = (struct iocblk *)mp->b_rptr; 504 switch (iocp->ioc_cmd) { 505 default: 506 if ((ptmp->pt_state & PTLOCK) || 507 (ptmp->pts_rdq == NULL)) { 508 DBG(("got M_IOCTL but no slave\n")); 509 miocnak(qp, mp, 0, EINVAL); 510 PT_EXIT_READ(ptmp); 511 return; 512 } 513 (void) putq(qp, mp); 514 break; 515 case UNLKPT: 516 mutex_enter(&ptmp->pt_lock); 517 ptmp->pt_state &= ~PTLOCK; 518 mutex_exit(&ptmp->pt_lock); 519 /*FALLTHROUGH*/ 520 case ISPTM: 521 DBG(("ack the UNLKPT/ISPTM\n")); 522 miocack(qp, mp, 0, 0); 523 break; 524 case ZONEPT: 525 { 526 zoneid_t z; 527 int error; 528 529 if ((error = drv_priv(iocp->ioc_cr)) != 0) { 530 miocnak(qp, mp, 0, error); 531 break; 532 } 533 if ((error = miocpullup(mp, sizeof (zoneid_t))) != 0) { 534 miocnak(qp, mp, 0, error); 535 break; 536 } 537 z = *((zoneid_t *)mp->b_cont->b_rptr); 538 if (z < MIN_ZONEID || z > MAX_ZONEID) { 539 miocnak(qp, mp, 0, EINVAL); 540 break; 541 } 542 543 mutex_enter(&ptmp->pt_lock); 544 ptmp->pt_zoneid = z; 545 mutex_exit(&ptmp->pt_lock); 546 miocack(qp, mp, 0, 0); 547 break; 548 } 549 case OWNERPT: 550 { 551 pt_own_t *ptop; 552 int error; 553 zone_t *zone; 554 555 if ((error = miocpullup(mp, sizeof (pt_own_t))) != 0) { 556 miocnak(qp, mp, 0, error); 557 break; 558 } 559 560 zone = zone_find_by_id(ptmp->pt_zoneid); 561 ptop = (pt_own_t *)mp->b_cont->b_rptr; 562 563 if (!VALID_UID(ptop->pto_ruid, zone) || 564 !VALID_GID(ptop->pto_rgid, zone)) { 565 zone_rele(zone); 566 miocnak(qp, mp, 0, EINVAL); 567 break; 568 } 569 zone_rele(zone); 570 mutex_enter(&ptmp->pt_lock); 571 ptmp->pt_ruid = ptop->pto_ruid; 572 ptmp->pt_rgid = ptop->pto_rgid; 573 mutex_exit(&ptmp->pt_lock); 574 miocack(qp, mp, 0, 0); 575 break; 576 } 577 } 578 break; 579 580 case M_READ: 581 /* Caused by ldterm - can not pass to slave */ 582 freemsg(mp); 583 break; 584 585 /* 586 * send other messages to slave 587 */ 588 default: 589 if ((ptmp->pt_state & PTLOCK) || (ptmp->pts_rdq == NULL)) { 590 DBG(("got msg. but no slave\n")); 591 mp = mexchange(NULL, mp, 2, M_ERROR, -1); 592 if (mp != NULL) { 593 mp->b_rptr[0] = NOERROR; 594 mp->b_rptr[1] = EINVAL; 595 qreply(qp, mp); 596 } 597 PT_EXIT_READ(ptmp); 598 return; 599 } 600 DBG(("put msg on master's write queue\n")); 601 (void) putq(qp, mp); 602 break; 603 } 604 DBG(("return from ptmwput()\n")); 605 PT_EXIT_READ(ptmp); 606 } 607 608 609 /* 610 * enable the write side of the slave. This triggers the 611 * slave to send any messages queued on its write side to 612 * the read side of this master. 613 */ 614 static void 615 ptmrsrv(queue_t *qp) 616 { 617 struct pt_ttys *ptmp; 618 619 DBG(("entering ptmrsrv\n")); 620 ASSERT(qp->q_ptr); 621 622 ptmp = (struct pt_ttys *)qp->q_ptr; 623 PT_ENTER_READ(ptmp); 624 if (ptmp->pts_rdq) { 625 qenable(WR(ptmp->pts_rdq)); 626 } 627 PT_EXIT_READ(ptmp); 628 DBG(("leaving ptmrsrv\n")); 629 } 630 631 632 /* 633 * If there are messages on this queue that can be sent to 634 * slave, send them via putnext(). Else, if queued messages 635 * cannot be sent, leave them on this queue. If priority 636 * messages on this queue, send them to slave no matter what. 637 */ 638 static void 639 ptmwsrv(queue_t *qp) 640 { 641 struct pt_ttys *ptmp; 642 mblk_t *mp; 643 644 DBG(("entering ptmwsrv\n")); 645 ASSERT(qp->q_ptr); 646 647 ptmp = (struct pt_ttys *)qp->q_ptr; 648 649 if ((mp = getq(qp)) == NULL) { 650 /* If there are no messages there's nothing to do. */ 651 DBG(("leaving ptmwsrv (no messages)\n")); 652 return; 653 } 654 655 PT_ENTER_READ(ptmp); 656 if ((ptmp->pt_state & PTLOCK) || (ptmp->pts_rdq == NULL)) { 657 DBG(("in master write srv proc but no slave\n")); 658 /* 659 * Free messages on the write queue and send 660 * NAK for any M_IOCTL type messages to wakeup 661 * the user process waiting for ACK/NAK from 662 * the ioctl invocation 663 */ 664 do { 665 if (mp->b_datap->db_type == M_IOCTL) 666 miocnak(qp, mp, 0, EINVAL); 667 else 668 freemsg(mp); 669 } while ((mp = getq(qp)) != NULL); 670 flushq(qp, FLUSHALL); 671 672 mp = mexchange(NULL, NULL, 2, M_ERROR, -1); 673 if (mp != NULL) { 674 mp->b_rptr[0] = NOERROR; 675 mp->b_rptr[1] = EINVAL; 676 qreply(qp, mp); 677 } 678 PT_EXIT_READ(ptmp); 679 return; 680 } 681 /* 682 * while there are messages on this write queue... 683 */ 684 do { 685 /* 686 * if don't have control message and cannot put 687 * msg. on slave's read queue, put it back on 688 * this queue. 689 */ 690 if (mp->b_datap->db_type <= QPCTL && 691 !bcanputnext(ptmp->pts_rdq, mp->b_band)) { 692 DBG(("put msg. back on queue\n")); 693 (void) putbq(qp, mp); 694 break; 695 } 696 /* 697 * else send the message up slave's stream 698 */ 699 DBG(("send message to slave\n")); 700 putnext(ptmp->pts_rdq, mp); 701 } while ((mp = getq(qp)) != NULL); 702 DBG(("leaving ptmwsrv\n")); 703 PT_EXIT_READ(ptmp); 704 } 705