xref: /illumos-gate/usr/src/uts/common/io/nxge/nxge_virtual.c (revision 7247f8883be6bcac5fe4735b6f87f873387dbbef)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 #include <sys/nxge/nxge_impl.h>
29 #include <sys/nxge/nxge_mac.h>
30 
31 static void nxge_get_niu_property(dev_info_t *, niu_type_t *);
32 static nxge_status_t nxge_get_mac_addr_properties(p_nxge_t);
33 static nxge_status_t nxge_use_cfg_n2niu_properties(p_nxge_t);
34 static void nxge_use_cfg_neptune_properties(p_nxge_t);
35 static void nxge_use_cfg_dma_config(p_nxge_t);
36 static void nxge_use_cfg_vlan_class_config(p_nxge_t);
37 static void nxge_use_cfg_mac_class_config(p_nxge_t);
38 static void nxge_use_cfg_class_config(p_nxge_t);
39 static void nxge_use_cfg_link_cfg(p_nxge_t);
40 static void nxge_set_hw_dma_config(p_nxge_t);
41 static void nxge_set_hw_vlan_class_config(p_nxge_t);
42 static void nxge_set_hw_mac_class_config(p_nxge_t);
43 static void nxge_set_hw_class_config(p_nxge_t);
44 static nxge_status_t nxge_use_default_dma_config_n2(p_nxge_t);
45 static void nxge_ldgv_setup(p_nxge_ldg_t *, p_nxge_ldv_t *, uint8_t,
46 	uint8_t, int *);
47 static void nxge_init_mmac(p_nxge_t);
48 
49 uint32_t nxge_use_hw_property = 1;
50 uint32_t nxge_groups_per_port = 2;
51 
52 extern uint32_t nxge_use_partition;
53 extern uint32_t nxge_dma_obp_props_only;
54 
55 extern uint16_t nxge_rcr_timeout;
56 extern uint16_t nxge_rcr_threshold;
57 
58 extern uint_t nxge_rx_intr(void *, void *);
59 extern uint_t nxge_tx_intr(void *, void *);
60 extern uint_t nxge_mif_intr(void *, void *);
61 extern uint_t nxge_mac_intr(void *, void *);
62 extern uint_t nxge_syserr_intr(void *, void *);
63 extern void *nxge_list;
64 
65 #define	NXGE_SHARED_REG_SW_SIM
66 
67 #ifdef NXGE_SHARED_REG_SW_SIM
68 uint64_t global_dev_ctrl = 0;
69 #endif
70 
71 #define	MAX_SIBLINGS	NXGE_MAX_PORTS
72 
73 extern uint32_t nxge_rbr_size;
74 extern uint32_t nxge_rcr_size;
75 extern uint32_t nxge_tx_ring_size;
76 extern uint32_t nxge_rbr_spare_size;
77 
78 extern npi_status_t npi_mac_altaddr_disable(npi_handle_t, uint8_t, uint8_t);
79 
80 static uint8_t p2_tx_fair[2] = {12, 12};
81 static uint8_t p2_tx_equal[2] = {12, 12};
82 static uint8_t p4_tx_fair[4] = {6, 6, 6, 6};
83 static uint8_t p4_tx_equal[4] = {6, 6, 6, 6};
84 static uint8_t p2_rx_fair[2] = {8, 8};
85 static uint8_t p2_rx_equal[2] = {8, 8};
86 
87 static uint8_t p4_rx_fair[4] = {4, 4, 4, 4};
88 static uint8_t p4_rx_equal[4] = {4, 4, 4, 4};
89 
90 static uint8_t p2_rdcgrp_fair[2] = {4, 4};
91 static uint8_t p2_rdcgrp_equal[2] = {4, 4};
92 static uint8_t p4_rdcgrp_fair[4] = {2, 2, 1, 1};
93 static uint8_t p4_rdcgrp_equal[4] = {2, 2, 2, 2};
94 static uint8_t p2_rdcgrp_cls[2] = {1, 1};
95 static uint8_t p4_rdcgrp_cls[4] = {1, 1, 1, 1};
96 
97 typedef enum {
98 	DEFAULT = 0,
99 	EQUAL,
100 	FAIR,
101 	CUSTOM,
102 	CLASSIFY,
103 	L2_CLASSIFY,
104 	L3_DISTRIBUTE,
105 	L3_CLASSIFY,
106 	L3_TCAM,
107 	CONFIG_TOKEN_NONE
108 } config_token_t;
109 
110 static char *token_names[] = {
111 	"default",
112 	"equal",
113 	"fair",
114 	"custom",
115 	"classify",
116 	"l2_classify",
117 	"l3_distribute",
118 	"l3_classify",
119 	"l3_tcam",
120 	"none",
121 };
122 
123 void nxge_virint_regs_dump(p_nxge_t nxgep);
124 
125 void
126 nxge_virint_regs_dump(p_nxge_t nxgep)
127 {
128 	npi_handle_t handle;
129 
130 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_virint_regs_dump"));
131 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
132 	(void) npi_vir_dump_pio_fzc_regs_one(handle);
133 	(void) npi_vir_dump_ldgnum(handle);
134 	(void) npi_vir_dump_ldsv(handle);
135 	(void) npi_vir_dump_imask0(handle);
136 	(void) npi_vir_dump_sid(handle);
137 	(void) npi_mac_dump_regs(handle, nxgep->function_num);
138 	(void) npi_ipp_dump_regs(handle, nxgep->function_num);
139 	(void) npi_fflp_dump_regs(handle);
140 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_virint_regs_dump"));
141 }
142 
143 /*
144  * For now: we hard coded the DMA configurations.
145  *	    and assume for one partition only.
146  *
147  *       OBP. Then OBP will pass this partition's
148  *	 Neptune configurations to fcode to create
149  *	 properties for them.
150  *
151  *	Since Neptune(PCI-E) and NIU (Niagara-2) has
152  *	different bus interfaces, the driver needs
153  *	to know which bus it is connected to.
154  *  	Ravinder suggested: create a device property.
155  *	In partitioning environment, we cannot
156  *	use .conf file (need to check). If conf changes,
157  *	need to reboot the system.
158  *	The following function assumes that we will
159  *	retrieve its properties from a virtualized nexus driver.
160  */
161 
162 nxge_status_t
163 nxge_cntlops(dev_info_t *dip, nxge_ctl_enum_t ctlop, void *arg, void *result)
164 {
165 	nxge_status_t status = NXGE_OK;
166 	int instance;
167 	p_nxge_t nxgep;
168 
169 #ifndef NXGE_SHARED_REG_SW_SIM
170 	npi_handle_t handle;
171 	uint16_t sr16, cr16;
172 #endif
173 	instance = ddi_get_instance(dip);
174 	NXGE_DEBUG_MSG((NULL, VIR_CTL, "Instance %d ", instance));
175 
176 	if (nxge_list == NULL) {
177 		NXGE_ERROR_MSG((NULL, NXGE_ERR_CTL,
178 				"nxge_cntlops: nxge_list null"));
179 		return (NXGE_ERROR);
180 	}
181 	nxgep = (p_nxge_t)ddi_get_soft_state(nxge_list, instance);
182 	if (nxgep == NULL) {
183 		NXGE_ERROR_MSG((NULL, NXGE_ERR_CTL,
184 				"nxge_cntlops: nxgep null"));
185 		return (NXGE_ERROR);
186 	}
187 #ifndef NXGE_SHARED_REG_SW_SIM
188 	handle = nxgep->npi_reg_handle;
189 #endif
190 	switch (ctlop) {
191 	case NXGE_CTLOPS_NIUTYPE:
192 		nxge_get_niu_property(dip, (niu_type_t *)result);
193 		return (status);
194 
195 	case NXGE_CTLOPS_GET_SHARED_REG:
196 #ifdef NXGE_SHARED_REG_SW_SIM
197 		*(uint64_t *)result = global_dev_ctrl;
198 		return (0);
199 #else
200 		status = npi_dev_func_sr_sr_get(handle, &sr16);
201 		*(uint16_t *)result = sr16;
202 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
203 			"nxge_cntlops: NXGE_CTLOPS_GET_SHARED_REG"));
204 		return (0);
205 #endif
206 
207 	case NXGE_CTLOPS_SET_SHARED_REG_LOCK:
208 #ifdef NXGE_SHARED_REG_SW_SIM
209 		global_dev_ctrl = *(uint64_t *)arg;
210 		return (0);
211 #else
212 		status = NPI_FAILURE;
213 		while (status != NPI_SUCCESS)
214 			status = npi_dev_func_sr_lock_enter(handle);
215 
216 		sr16 = *(uint16_t *)arg;
217 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
218 		status = npi_dev_func_sr_lock_free(handle);
219 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
220 			"nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
221 		return (0);
222 #endif
223 
224 	case NXGE_CTLOPS_UPDATE_SHARED_REG:
225 #ifdef NXGE_SHARED_REG_SW_SIM
226 		global_dev_ctrl |= *(uint64_t *)arg;
227 		return (0);
228 #else
229 		status = NPI_FAILURE;
230 		while (status != NPI_SUCCESS)
231 			status = npi_dev_func_sr_lock_enter(handle);
232 		status = npi_dev_func_sr_sr_get(handle, &sr16);
233 		sr16 |= *(uint16_t *)arg;
234 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
235 		status = npi_dev_func_sr_lock_free(handle);
236 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
237 			"nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
238 		return (0);
239 #endif
240 
241 	case NXGE_CTLOPS_CLEAR_BIT_SHARED_REG_UL:
242 #ifdef NXGE_SHARED_REG_SW_SIM
243 		global_dev_ctrl |= *(uint64_t *)arg;
244 		return (0);
245 #else
246 		status = npi_dev_func_sr_sr_get(handle, &sr16);
247 		cr16 = *(uint16_t *)arg;
248 		sr16 &= ~cr16;
249 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
250 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
251 			"nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
252 		return (0);
253 #endif
254 
255 	case NXGE_CTLOPS_CLEAR_BIT_SHARED_REG:
256 #ifdef NXGE_SHARED_REG_SW_SIM
257 		global_dev_ctrl |= *(uint64_t *)arg;
258 		return (0);
259 #else
260 		status = NPI_FAILURE;
261 		while (status != NPI_SUCCESS)
262 			status = npi_dev_func_sr_lock_enter(handle);
263 		status = npi_dev_func_sr_sr_get(handle, &sr16);
264 		cr16 = *(uint16_t *)arg;
265 		sr16 &= ~cr16;
266 		status = npi_dev_func_sr_sr_set_only(handle, &sr16);
267 		status = npi_dev_func_sr_lock_free(handle);
268 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
269 			"nxge_cntlops: NXGE_CTLOPS_SET_SHARED_REG"));
270 		return (0);
271 #endif
272 
273 	case NXGE_CTLOPS_GET_LOCK_BLOCK:
274 #ifdef NXGE_SHARED_REG_SW_SIM
275 		global_dev_ctrl |= *(uint64_t *)arg;
276 		return (0);
277 #else
278 		status = NPI_FAILURE;
279 		while (status != NPI_SUCCESS)
280 			status = npi_dev_func_sr_lock_enter(handle);
281 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
282 			"nxge_cntlops: NXGE_CTLOPS_GET_LOCK_BLOCK"));
283 		return (0);
284 #endif
285 	case NXGE_CTLOPS_GET_LOCK_TRY:
286 #ifdef NXGE_SHARED_REG_SW_SIM
287 		global_dev_ctrl |= *(uint64_t *)arg;
288 		return (0);
289 #else
290 		status = npi_dev_func_sr_lock_enter(handle);
291 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
292 			"nxge_cntlops: NXGE_CTLOPS_GET_LOCK_TRY"));
293 		if (status == NPI_SUCCESS)
294 			return (NXGE_OK);
295 		else
296 			return (NXGE_ERROR);
297 #endif
298 	case NXGE_CTLOPS_FREE_LOCK:
299 #ifdef NXGE_SHARED_REG_SW_SIM
300 		global_dev_ctrl |= *(uint64_t *)arg;
301 		return (0);
302 #else
303 		status = npi_dev_func_sr_lock_free(handle);
304 		NXGE_DEBUG_MSG((NULL, VIR_CTL,
305 			"nxge_cntlops: NXGE_CTLOPS_GET_LOCK_FREE"));
306 		if (status == NPI_SUCCESS)
307 			return (NXGE_OK);
308 		else
309 			return (NXGE_ERROR);
310 #endif
311 
312 	default:
313 		status = NXGE_ERROR;
314 	}
315 
316 	return (status);
317 }
318 
319 void
320 nxge_common_lock_get(p_nxge_t nxgep)
321 {
322 	uint32_t status = NPI_FAILURE;
323 	npi_handle_t handle;
324 
325 #if	defined(NXGE_SHARE_REG_SW_SIM)
326 	return;
327 #endif
328 	handle = nxgep->npi_reg_handle;
329 	while (status != NPI_SUCCESS)
330 		status = npi_dev_func_sr_lock_enter(handle);
331 }
332 
333 void
334 nxge_common_lock_free(p_nxge_t nxgep)
335 {
336 	npi_handle_t handle;
337 
338 #if	defined(NXGE_SHARE_REG_SW_SIM)
339 	return;
340 #endif
341 	handle = nxgep->npi_reg_handle;
342 	(void) npi_dev_func_sr_lock_free(handle);
343 }
344 
345 
346 static void
347 nxge_get_niu_property(dev_info_t *dip, niu_type_t *niu_type)
348 {
349 	uchar_t *prop_val;
350 	uint_t prop_len;
351 
352 	*niu_type = NEPTUNE;
353 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0,
354 			"niu-type", (uchar_t **)&prop_val,
355 			&prop_len) == DDI_PROP_SUCCESS) {
356 		if (strncmp("niu", (caddr_t)prop_val, (size_t)prop_len) == 0) {
357 			*niu_type = N2_NIU;
358 		}
359 		ddi_prop_free(prop_val);
360 	}
361 }
362 
363 static config_token_t
364 nxge_get_config_token(char *prop)
365 {
366 	config_token_t token = DEFAULT;
367 
368 	while (token < CONFIG_TOKEN_NONE) {
369 		if (strncmp(prop, token_names[token], 4) == 0)
370 			break;
371 		token++;
372 	}
373 	return (token);
374 }
375 
376 /* per port */
377 
378 static nxge_status_t
379 nxge_update_rxdma_grp_properties(p_nxge_t nxgep, config_token_t token,
380 	dev_info_t *s_dip[])
381 {
382 	nxge_status_t status = NXGE_OK;
383 	int ddi_status;
384 	int num_ports = nxgep->nports;
385 	int port, bits, j;
386 	uint8_t start_grp = 0, num_grps = 0;
387 	p_nxge_param_t param_arr;
388 	uint32_t grp_bitmap[MAX_SIBLINGS];
389 	int custom_start_grp[MAX_SIBLINGS];
390 	int custom_num_grp[MAX_SIBLINGS];
391 	uint8_t bad_config = B_FALSE;
392 	char *start_prop, *num_prop, *cfg_prop;
393 
394 	start_grp = 0;
395 	param_arr = nxgep->param_arr;
396 	start_prop = param_arr[param_rdc_grps_start].fcode_name;
397 	num_prop = param_arr[param_rx_rdc_grps].fcode_name;
398 
399 	switch (token) {
400 	case FAIR:
401 		cfg_prop = "fair";
402 		for (port = 0; port < num_ports; port++) {
403 			custom_num_grp[port] =
404 				(num_ports == 4) ?
405 				p4_rdcgrp_fair[port] :
406 				p2_rdcgrp_fair[port];
407 			custom_start_grp[port] = start_grp;
408 			start_grp += custom_num_grp[port];
409 		}
410 		break;
411 
412 	case EQUAL:
413 		cfg_prop = "equal";
414 		for (port = 0; port < num_ports; port++) {
415 			custom_num_grp[port] =
416 				(num_ports == 4) ?
417 				p4_rdcgrp_equal[port] :
418 				p2_rdcgrp_equal[port];
419 			custom_start_grp[port] = start_grp;
420 			start_grp += custom_num_grp[port];
421 		}
422 		break;
423 
424 
425 	case CLASSIFY:
426 		cfg_prop = "classify";
427 		for (port = 0; port < num_ports; port++) {
428 			custom_num_grp[port] = (num_ports == 4) ?
429 				p4_rdcgrp_cls[port] : p2_rdcgrp_cls[port];
430 			custom_start_grp[port] = start_grp;
431 			start_grp += custom_num_grp[port];
432 		}
433 		break;
434 
435 	case CUSTOM:
436 		cfg_prop = "custom";
437 		/* See if it is good config */
438 		num_grps = 0;
439 		for (port = 0; port < num_ports; port++) {
440 			custom_start_grp[port] =
441 				ddi_prop_get_int(DDI_DEV_T_NONE, s_dip[port],
442 				DDI_PROP_DONTPASS, start_prop, -1);
443 			if ((custom_start_grp[port] == -1) ||
444 				(custom_start_grp[port] >=
445 					NXGE_MAX_RDC_GRPS)) {
446 				bad_config = B_TRUE;
447 				break;
448 			}
449 			custom_num_grp[port] = ddi_prop_get_int(
450 				DDI_DEV_T_NONE,
451 				s_dip[port],
452 				DDI_PROP_DONTPASS,
453 				num_prop, -1);
454 
455 			if ((custom_num_grp[port] == -1) ||
456 				(custom_num_grp[port] >
457 					NXGE_MAX_RDC_GRPS) ||
458 				((custom_num_grp[port] +
459 						custom_start_grp[port]) >=
460 					NXGE_MAX_RDC_GRPS)) {
461 				bad_config = B_TRUE;
462 				break;
463 			}
464 			num_grps += custom_num_grp[port];
465 			if (num_grps > NXGE_MAX_RDC_GRPS) {
466 				bad_config = B_TRUE;
467 				break;
468 			}
469 			grp_bitmap[port] = 0;
470 			for (bits = 0;
471 				bits < custom_num_grp[port];
472 				bits++) {
473 				grp_bitmap[port] |=
474 					(1 << (bits + custom_start_grp[port]));
475 			}
476 
477 		}
478 
479 		if (bad_config == B_FALSE) {
480 			/* check for overlap */
481 			for (port = 0; port < num_ports - 1; port++) {
482 				for (j = port + 1; j < num_ports; j++) {
483 					if (grp_bitmap[port] &
484 						grp_bitmap[j]) {
485 						bad_config = B_TRUE;
486 						break;
487 					}
488 				}
489 				if (bad_config == B_TRUE)
490 					break;
491 			}
492 		}
493 		if (bad_config == B_TRUE) {
494 			/* use default config */
495 			for (port = 0; port < num_ports; port++) {
496 				custom_num_grp[port] =
497 					(num_ports == 4) ?
498 					p4_rx_fair[port] : p2_rx_fair[port];
499 				custom_start_grp[port] = start_grp;
500 				start_grp += custom_num_grp[port];
501 			}
502 		}
503 		break;
504 
505 	default:
506 		/* use default config */
507 		cfg_prop = "fair";
508 		for (port = 0; port < num_ports; port++) {
509 			custom_num_grp[port] = (num_ports == 4) ?
510 				p4_rx_fair[port] : p2_rx_fair[port];
511 			custom_start_grp[port] = start_grp;
512 			start_grp += custom_num_grp[port];
513 		}
514 		break;
515 	}
516 
517 	/* Now Update the rx properties */
518 	for (port = 0; port < num_ports; port++) {
519 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
520 			"rxdma-grp-cfg", cfg_prop);
521 		if (ddi_status != DDI_PROP_SUCCESS) {
522 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
523 					" property %s not updating",
524 					cfg_prop));
525 			status |= NXGE_DDI_FAILED;
526 		}
527 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
528 			num_prop, custom_num_grp[port]);
529 
530 		if (ddi_status != DDI_PROP_SUCCESS) {
531 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
532 					" property %s not updating",
533 					num_prop));
534 			status |= NXGE_DDI_FAILED;
535 		}
536 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
537 			start_prop, custom_start_grp[port]);
538 
539 		if (ddi_status != DDI_PROP_SUCCESS) {
540 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
541 					" property %s not updating",
542 					start_prop));
543 			status |= NXGE_DDI_FAILED;
544 		}
545 	}
546 	if (status & NXGE_DDI_FAILED)
547 		status |= NXGE_ERROR;
548 
549 	return (status);
550 }
551 
552 static nxge_status_t
553 nxge_update_rxdma_properties(p_nxge_t nxgep, config_token_t token,
554 	dev_info_t *s_dip[])
555 {
556 	nxge_status_t status = NXGE_OK;
557 	int ddi_status;
558 	int num_ports = nxgep->nports;
559 	int port, bits, j;
560 	uint8_t start_rdc = 0, num_rdc = 0;
561 	p_nxge_param_t param_arr;
562 	uint32_t rdc_bitmap[MAX_SIBLINGS];
563 	int custom_start_rdc[MAX_SIBLINGS];
564 	int custom_num_rdc[MAX_SIBLINGS];
565 	uint8_t bad_config = B_FALSE;
566 	int *prop_val;
567 	uint_t prop_len;
568 	char *start_rdc_prop, *num_rdc_prop, *cfg_prop;
569 
570 	start_rdc = 0;
571 	param_arr = nxgep->param_arr;
572 	start_rdc_prop = param_arr[param_rxdma_channels_begin].fcode_name;
573 	num_rdc_prop = param_arr[param_rxdma_channels].fcode_name;
574 
575 	switch (token) {
576 	case FAIR:
577 		cfg_prop = "fair";
578 		for (port = 0; port < num_ports; port++) {
579 			custom_num_rdc[port] = (num_ports == 4) ?
580 				p4_rx_fair[port] : p2_rx_fair[port];
581 			custom_start_rdc[port] = start_rdc;
582 			start_rdc += custom_num_rdc[port];
583 		}
584 		break;
585 
586 	case EQUAL:
587 		cfg_prop = "equal";
588 		for (port = 0; port < num_ports; port++) {
589 			custom_num_rdc[port] = (num_ports == 4) ?
590 				p4_rx_equal[port] :
591 				p2_rx_equal[port];
592 			custom_start_rdc[port] = start_rdc;
593 			start_rdc += custom_num_rdc[port];
594 		}
595 		break;
596 
597 	case CUSTOM:
598 		cfg_prop = "custom";
599 		/* See if it is good config */
600 		num_rdc = 0;
601 		for (port = 0; port < num_ports; port++) {
602 			ddi_status = ddi_prop_lookup_int_array(
603 				DDI_DEV_T_ANY,
604 				s_dip[port], 0,
605 				start_rdc_prop,
606 				&prop_val,
607 				&prop_len);
608 			if (ddi_status == DDI_SUCCESS)
609 				custom_start_rdc[port] = *prop_val;
610 			else {
611 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
612 						" %s custom start port %d"
613 						" read failed ",
614 						" rxdma-cfg", port));
615 				bad_config = B_TRUE;
616 				status |= NXGE_DDI_FAILED;
617 			}
618 			if ((custom_start_rdc[port] == -1) ||
619 				(custom_start_rdc[port] >=
620 					NXGE_MAX_RDCS)) {
621 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
622 						" %s custom start %d"
623 						" out of range %x ",
624 						" rxdma-cfg",
625 						port,
626 						custom_start_rdc[port]));
627 				bad_config = B_TRUE;
628 				break;
629 			}
630 			ddi_status = ddi_prop_lookup_int_array(
631 				DDI_DEV_T_ANY,
632 				s_dip[port],
633 				0,
634 				num_rdc_prop,
635 				&prop_val,
636 				&prop_len);
637 
638 			if (ddi_status == DDI_SUCCESS)
639 				custom_num_rdc[port] = *prop_val;
640 			else {
641 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
642 					" %s custom num port %d"
643 					" read failed ",
644 					"rxdma-cfg", port));
645 				bad_config = B_TRUE;
646 				status |= NXGE_DDI_FAILED;
647 			}
648 
649 			if ((custom_num_rdc[port] == -1) ||
650 					(custom_num_rdc[port] >
651 						NXGE_MAX_RDCS) ||
652 					((custom_num_rdc[port] +
653 						custom_start_rdc[port]) >
654 					NXGE_MAX_RDCS)) {
655 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
656 					" %s custom num %d"
657 					" out of range %x ",
658 					" rxdma-cfg",
659 					port, custom_num_rdc[port]));
660 				bad_config = B_TRUE;
661 				break;
662 			}
663 			num_rdc += custom_num_rdc[port];
664 			if (num_rdc > NXGE_MAX_RDCS) {
665 				bad_config = B_TRUE;
666 				break;
667 			}
668 			rdc_bitmap[port] = 0;
669 			for (bits = 0;
670 				bits < custom_num_rdc[port]; bits++) {
671 				rdc_bitmap[port] |=
672 					(1 << (bits + custom_start_rdc[port]));
673 			}
674 		}
675 
676 		if (bad_config == B_FALSE) {
677 			/* check for overlap */
678 			for (port = 0; port < num_ports - 1; port++) {
679 				for (j = port + 1; j < num_ports; j++) {
680 					if (rdc_bitmap[port] &
681 						rdc_bitmap[j]) {
682 						NXGE_DEBUG_MSG((nxgep,
683 							CFG_CTL,
684 							" rxdma-cfg"
685 							" property custom"
686 							" bit overlap"
687 							" %d %d ",
688 							port, j));
689 						bad_config = B_TRUE;
690 						break;
691 					}
692 				}
693 				if (bad_config == B_TRUE)
694 					break;
695 			}
696 		}
697 		if (bad_config == B_TRUE) {
698 			/* use default config */
699 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
700 				" rxdma-cfg property:"
701 				" bad custom config:"
702 				" use default"));
703 			for (port = 0; port < num_ports; port++) {
704 				custom_num_rdc[port] =
705 					(num_ports == 4) ?
706 					p4_rx_fair[port] :
707 					p2_rx_fair[port];
708 				custom_start_rdc[port] = start_rdc;
709 				start_rdc += custom_num_rdc[port];
710 			}
711 		}
712 		break;
713 
714 	default:
715 		/* use default config */
716 		cfg_prop = "fair";
717 		for (port = 0; port < num_ports; port++) {
718 			custom_num_rdc[port] = (num_ports == 4) ?
719 				p4_rx_fair[port] : p2_rx_fair[port];
720 			custom_start_rdc[port] = start_rdc;
721 			start_rdc += custom_num_rdc[port];
722 		}
723 		break;
724 	}
725 
726 	/* Now Update the rx properties */
727 	for (port = 0; port < num_ports; port++) {
728 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
729 			" update property rxdma-cfg with %s ", cfg_prop));
730 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
731 			"rxdma-cfg", cfg_prop);
732 		if (ddi_status != DDI_PROP_SUCCESS) {
733 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
734 				" property rxdma-cfg is not updating to %s",
735 				cfg_prop));
736 			status |= NXGE_DDI_FAILED;
737 		}
738 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
739 			num_rdc_prop, custom_num_rdc[port]));
740 
741 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
742 			num_rdc_prop, custom_num_rdc[port]);
743 
744 		if (ddi_status != DDI_PROP_SUCCESS) {
745 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
746 				" property %s not updating with %d",
747 				num_rdc_prop, custom_num_rdc[port]));
748 			status |= NXGE_DDI_FAILED;
749 		}
750 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
751 			start_rdc_prop, custom_start_rdc[port]));
752 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
753 			start_rdc_prop, custom_start_rdc[port]);
754 
755 		if (ddi_status != DDI_PROP_SUCCESS) {
756 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
757 				" property %s not updating with %d ",
758 				start_rdc_prop, custom_start_rdc[port]));
759 			status |= NXGE_DDI_FAILED;
760 		}
761 	}
762 	if (status & NXGE_DDI_FAILED)
763 		status |= NXGE_ERROR;
764 	return (status);
765 }
766 
767 static nxge_status_t
768 nxge_update_txdma_properties(p_nxge_t nxgep, config_token_t token,
769 	dev_info_t *s_dip[])
770 {
771 	nxge_status_t status = NXGE_OK;
772 	int ddi_status = DDI_SUCCESS;
773 	int num_ports = nxgep->nports;
774 	int port, bits, j;
775 	uint8_t start_tdc = 0, num_tdc = 0;
776 	p_nxge_param_t param_arr;
777 	uint32_t tdc_bitmap[MAX_SIBLINGS];
778 	int custom_start_tdc[MAX_SIBLINGS];
779 	int custom_num_tdc[MAX_SIBLINGS];
780 	uint8_t bad_config = B_FALSE;
781 	int *prop_val;
782 	uint_t prop_len;
783 	char *start_tdc_prop, *num_tdc_prop, *cfg_prop;
784 
785 	start_tdc = 0;
786 	param_arr = nxgep->param_arr;
787 	start_tdc_prop = param_arr[param_txdma_channels_begin].fcode_name;
788 	num_tdc_prop = param_arr[param_txdma_channels].fcode_name;
789 
790 	switch (token) {
791 	case FAIR:
792 		cfg_prop = "fair";
793 		for (port = 0; port < num_ports; port++) {
794 			custom_num_tdc[port] = (num_ports == 4) ?
795 				p4_tx_fair[port] : p2_tx_fair[port];
796 			custom_start_tdc[port] = start_tdc;
797 			start_tdc += custom_num_tdc[port];
798 		}
799 		break;
800 
801 	case EQUAL:
802 		cfg_prop = "equal";
803 		for (port = 0; port < num_ports; port++) {
804 			custom_num_tdc[port] = (num_ports == 4) ?
805 				p4_tx_equal[port] : p2_tx_equal[port];
806 			custom_start_tdc[port] = start_tdc;
807 			start_tdc += custom_num_tdc[port];
808 		}
809 		break;
810 
811 	case CUSTOM:
812 		cfg_prop = "custom";
813 		/* See if it is good config */
814 		num_tdc = 0;
815 		for (port = 0; port < num_ports; port++) {
816 			ddi_status = ddi_prop_lookup_int_array(
817 				DDI_DEV_T_ANY, s_dip[port], 0, start_tdc_prop,
818 				&prop_val, &prop_len);
819 			if (ddi_status == DDI_SUCCESS)
820 				custom_start_tdc[port] = *prop_val;
821 			else {
822 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
823 					" %s custom start port %d"
824 					" read failed ", " txdma-cfg", port));
825 				bad_config = B_TRUE;
826 				status |= NXGE_DDI_FAILED;
827 			}
828 
829 			if ((custom_start_tdc[port] == -1) ||
830 					(custom_start_tdc[port] >=
831 					NXGE_MAX_RDCS)) {
832 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
833 					" %s custom start %d"
834 					" out of range %x ", " txdma-cfg",
835 					port, custom_start_tdc[port]));
836 				bad_config = B_TRUE;
837 				break;
838 			}
839 
840 			ddi_status = ddi_prop_lookup_int_array(
841 				DDI_DEV_T_ANY, s_dip[port], 0, num_tdc_prop,
842 				&prop_val, &prop_len);
843 			if (ddi_status == DDI_SUCCESS)
844 				custom_num_tdc[port] = *prop_val;
845 			else {
846 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
847 					" %s custom num port %d"
848 					" read failed ", " txdma-cfg", port));
849 				bad_config = B_TRUE;
850 				status |= NXGE_DDI_FAILED;
851 			}
852 
853 			if ((custom_num_tdc[port] == -1) ||
854 					(custom_num_tdc[port] >
855 						NXGE_MAX_TDCS) ||
856 					((custom_num_tdc[port] +
857 						custom_start_tdc[port]) >
858 					NXGE_MAX_TDCS)) {
859 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
860 					" %s custom num %d"
861 					" out of range %x ", " rxdma-cfg",
862 					port, custom_num_tdc[port]));
863 				bad_config = B_TRUE;
864 				break;
865 			}
866 			num_tdc += custom_num_tdc[port];
867 			if (num_tdc > NXGE_MAX_TDCS) {
868 				bad_config = B_TRUE;
869 				break;
870 			}
871 			tdc_bitmap[port] = 0;
872 			for (bits = 0;
873 				bits < custom_num_tdc[port]; bits++) {
874 				tdc_bitmap[port] |=
875 					(1 <<
876 					(bits + custom_start_tdc[port]));
877 			}
878 
879 		}
880 
881 		if (bad_config == B_FALSE) {
882 			/* check for overlap */
883 			for (port = 0; port < num_ports - 1; port++) {
884 				for (j = port + 1; j < num_ports; j++) {
885 					if (tdc_bitmap[port] &
886 						tdc_bitmap[j]) {
887 						NXGE_DEBUG_MSG((nxgep, CFG_CTL,
888 							" rxdma-cfg"
889 							" property custom"
890 							" bit overlap"
891 							" %d %d ",
892 							port, j));
893 						bad_config = B_TRUE;
894 						break;
895 					}
896 				}
897 				if (bad_config == B_TRUE)
898 					break;
899 			}
900 		}
901 		if (bad_config == B_TRUE) {
902 			/* use default config */
903 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
904 				" txdma-cfg property:"
905 				" bad custom config:" " use default"));
906 
907 			for (port = 0; port < num_ports; port++) {
908 				custom_num_tdc[port] = (num_ports == 4) ?
909 					p4_tx_fair[port] : p2_tx_fair[port];
910 				custom_start_tdc[port] = start_tdc;
911 				start_tdc += custom_num_tdc[port];
912 			}
913 		}
914 		break;
915 
916 	default:
917 		/* use default config */
918 		cfg_prop = "fair";
919 		for (port = 0; port < num_ports; port++) {
920 			custom_num_tdc[port] = (num_ports == 4) ?
921 				p4_tx_fair[port] : p2_tx_fair[port];
922 			custom_start_tdc[port] = start_tdc;
923 			start_tdc += custom_num_tdc[port];
924 		}
925 		break;
926 	}
927 
928 	/* Now Update the tx properties */
929 	for (port = 0; port < num_ports; port++) {
930 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
931 			" update property txdma-cfg with %s ", cfg_prop));
932 		ddi_status = ddi_prop_update_string(DDI_DEV_T_NONE, s_dip[port],
933 			"txdma-cfg", cfg_prop);
934 		if (ddi_status != DDI_PROP_SUCCESS) {
935 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
936 				" property txdma-cfg is not updating to %s",
937 				cfg_prop));
938 			status |= NXGE_DDI_FAILED;
939 		}
940 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
941 			num_tdc_prop, custom_num_tdc[port]));
942 
943 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
944 			num_tdc_prop, custom_num_tdc[port]);
945 
946 		if (ddi_status != DDI_PROP_SUCCESS) {
947 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
948 				" property %s not updating with %d",
949 				num_tdc_prop,
950 				custom_num_tdc[port]));
951 			status |= NXGE_DDI_FAILED;
952 		}
953 
954 		NXGE_DEBUG_MSG((nxgep, CFG_CTL, " update property %s with %d ",
955 			start_tdc_prop, custom_start_tdc[port]));
956 
957 		ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, s_dip[port],
958 			start_tdc_prop, custom_start_tdc[port]);
959 		if (ddi_status != DDI_PROP_SUCCESS) {
960 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
961 				" property %s not updating with %d ",
962 				start_tdc_prop, custom_start_tdc[port]));
963 			status |= NXGE_DDI_FAILED;
964 		}
965 	}
966 	if (status & NXGE_DDI_FAILED)
967 		status |= NXGE_ERROR;
968 	return (status);
969 }
970 
971 static nxge_status_t
972 nxge_update_cfg_properties(p_nxge_t nxgep, uint32_t flags,
973 	config_token_t token, dev_info_t *s_dip[])
974 {
975 	nxge_status_t status = NXGE_OK;
976 
977 	switch (flags) {
978 	case COMMON_TXDMA_CFG:
979 		if (nxge_dma_obp_props_only == 0)
980 			status = nxge_update_txdma_properties(nxgep,
981 				token, s_dip);
982 		break;
983 	case COMMON_RXDMA_CFG:
984 		if (nxge_dma_obp_props_only == 0)
985 			status = nxge_update_rxdma_properties(nxgep,
986 				token, s_dip);
987 
988 		break;
989 	case COMMON_RXDMA_GRP_CFG:
990 		status = nxge_update_rxdma_grp_properties(nxgep,
991 			token, s_dip);
992 		break;
993 	default:
994 		return (NXGE_ERROR);
995 	}
996 	return (status);
997 }
998 
999 /*
1000  * verify consistence.
1001  * (May require publishing the properties on all the ports.
1002  *
1003  * What if properties are published on function 0 device only?
1004  *
1005  *
1006  * rxdma-cfg, txdma-cfg, rxdma-grp-cfg (required )
1007  * What about class configs?
1008  *
1009  * If consistent, update the property on all the siblings.
1010  * set  a flag on hardware shared register
1011  * The rest of the siblings will check the flag
1012  * if the flag is set, they will use the updated property
1013  * without doing any validation.
1014  */
1015 
1016 nxge_status_t
1017 nxge_cfg_verify_set_classify_prop(p_nxge_t nxgep, char *prop,
1018 	uint64_t known_cfg, uint32_t override, dev_info_t *c_dip[])
1019 {
1020 	nxge_status_t status = NXGE_OK;
1021 	int ddi_status = DDI_SUCCESS;
1022 	int i = 0, found = 0, update_prop = B_TRUE;
1023 	int *cfg_val;
1024 	uint_t new_value, cfg_value[MAX_SIBLINGS];
1025 	uint_t prop_len;
1026 	uint_t known_cfg_value;
1027 
1028 	known_cfg_value = (uint_t)known_cfg;
1029 
1030 	if (override == B_TRUE) {
1031 		new_value = known_cfg_value;
1032 		for (i = 0; i < nxgep->nports; i++) {
1033 			ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE,
1034 				c_dip[i], prop, new_value);
1035 #ifdef NXGE_DEBUG_ERROR
1036 			if (ddi_status != DDI_PROP_SUCCESS)
1037 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1038 					" property %s failed update ", prop));
1039 #endif
1040 		}
1041 		if (ddi_status != DDI_PROP_SUCCESS)
1042 			return (NXGE_ERROR | NXGE_DDI_FAILED);
1043 	}
1044 	for (i = 0; i < nxgep->nports; i++) {
1045 		cfg_value[i] = known_cfg_value;
1046 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, c_dip[i], 0,
1047 				prop, &cfg_val,
1048 				&prop_len) == DDI_PROP_SUCCESS) {
1049 			cfg_value[i] = *cfg_val;
1050 			ddi_prop_free(cfg_val);
1051 			found++;
1052 		}
1053 	}
1054 
1055 	if (found != i) {
1056 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1057 			" property %s not specified on all ports", prop));
1058 		if (found == 0) {
1059 			/* not specified: Use default */
1060 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1061 				" property %s not specified on any port:"
1062 				" Using default", prop));
1063 			new_value = known_cfg_value;
1064 		} else {
1065 			/* specified on some */
1066 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1067 				" property %s not specified"
1068 				" on some ports: Using default", prop));
1069 			/* ? use p0 value instead ? */
1070 			new_value = known_cfg_value;
1071 		}
1072 	} else {
1073 		/* check type and consistence */
1074 		/* found on all devices */
1075 		for (i = 1; i < found; i++) {
1076 			if (cfg_value[i] != cfg_value[i - 1]) {
1077 				NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1078 					" property %s inconsistent:"
1079 					" Using default", prop));
1080 				new_value = known_cfg_value;
1081 				break;
1082 			}
1083 			/*
1084 			 * Found on all the ports and consistent. Nothing to
1085 			 * do.
1086 			 */
1087 			update_prop = B_FALSE;
1088 		}
1089 	}
1090 
1091 	if (update_prop == B_TRUE) {
1092 		for (i = 0; i < nxgep->nports; i++) {
1093 			ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE,
1094 				c_dip[i], prop, new_value);
1095 #ifdef NXGE_DEBUG_ERROR
1096 			if (ddi_status != DDI_SUCCESS)
1097 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1098 					" property %s not updating with %d"
1099 					" Using default",
1100 					prop, new_value));
1101 #endif
1102 			if (ddi_status != DDI_PROP_SUCCESS)
1103 				status |= NXGE_DDI_FAILED;
1104 		}
1105 	}
1106 	if (status & NXGE_DDI_FAILED)
1107 		status |= NXGE_ERROR;
1108 
1109 	return (status);
1110 }
1111 
1112 static uint64_t
1113 nxge_class_get_known_cfg(p_nxge_t nxgep, int class_prop, int rx_quick_cfg)
1114 {
1115 	int start_prop;
1116 	uint64_t cfg_value;
1117 	p_nxge_param_t param_arr;
1118 
1119 	param_arr = nxgep->param_arr;
1120 	cfg_value = param_arr[class_prop].value;
1121 	start_prop = param_h1_init_value;
1122 
1123 	/* update the properties per quick config */
1124 	switch (rx_quick_cfg) {
1125 	case CFG_L3_WEB:
1126 	case CFG_L3_DISTRIBUTE:
1127 		cfg_value = nxge_classify_get_cfg_value(nxgep,
1128 			rx_quick_cfg, class_prop - start_prop);
1129 		break;
1130 	default:
1131 		cfg_value = param_arr[class_prop].value;
1132 		break;
1133 	}
1134 	return (cfg_value);
1135 }
1136 
1137 static nxge_status_t
1138 nxge_cfg_verify_set_classify(p_nxge_t nxgep, dev_info_t *c_dip[])
1139 {
1140 	nxge_status_t status = NXGE_OK;
1141 	int rx_quick_cfg, class_prop, start_prop, end_prop;
1142 	char *prop_name;
1143 	int override = B_TRUE;
1144 	uint64_t cfg_value;
1145 	p_nxge_param_t param_arr;
1146 
1147 	param_arr = nxgep->param_arr;
1148 	rx_quick_cfg = param_arr[param_rx_quick_cfg].value;
1149 	start_prop = param_h1_init_value;
1150 	end_prop = param_class_opt_ipv6_sctp;
1151 
1152 	/* update the properties per quick config */
1153 	if (rx_quick_cfg == CFG_NOT_SPECIFIED)
1154 		override = B_FALSE;
1155 
1156 	/*
1157 	 * these parameter affect the classification outcome.
1158 	 * these parameters are used to configure the Flow key and
1159 	 * the TCAM key for each of the IP classes.
1160 	 * Included here are also the H1 and H2 initial values
1161 	 * which affect the distribution as well as final hash value
1162 	 * (hence the offset into RDC table and FCRAM bucket location)
1163 	 *
1164 	 */
1165 	for (class_prop = start_prop; class_prop <= end_prop; class_prop++) {
1166 		prop_name = param_arr[class_prop].fcode_name;
1167 		cfg_value = nxge_class_get_known_cfg(nxgep,
1168 			class_prop, rx_quick_cfg);
1169 		status = nxge_cfg_verify_set_classify_prop(nxgep, prop_name,
1170 			cfg_value, override, c_dip);
1171 	}
1172 
1173 	/*
1174 	 * these properties do not affect the actual classification outcome.
1175 	 * used to enable/disable or tune the fflp hardware
1176 	 *
1177 	 * fcram_access_ratio, tcam_access_ratio, tcam_enable, llc_snap_enable
1178 	 *
1179 	 */
1180 	override = B_FALSE;
1181 	for (class_prop = param_fcram_access_ratio;
1182 			class_prop <= param_llc_snap_enable; class_prop++) {
1183 		prop_name = param_arr[class_prop].fcode_name;
1184 		cfg_value = param_arr[class_prop].value;
1185 		status = nxge_cfg_verify_set_classify_prop(nxgep, prop_name,
1186 			cfg_value, override, c_dip);
1187 	}
1188 
1189 	return (status);
1190 }
1191 
1192 nxge_status_t
1193 nxge_cfg_verify_set(p_nxge_t nxgep, uint32_t flag)
1194 {
1195 	nxge_status_t status = NXGE_OK;
1196 	int i = 0, found = 0;
1197 	int num_siblings;
1198 	dev_info_t *c_dip[MAX_SIBLINGS + 1];
1199 	char *prop_val[MAX_SIBLINGS];
1200 	config_token_t c_token[MAX_SIBLINGS];
1201 	char *prop;
1202 
1203 	if (nxge_dma_obp_props_only)
1204 		return (NXGE_OK);
1205 
1206 	num_siblings = 0;
1207 	c_dip[num_siblings] = ddi_get_child(nxgep->p_dip);
1208 	while (c_dip[num_siblings]) {
1209 		c_dip[num_siblings + 1] =
1210 			ddi_get_next_sibling(c_dip[num_siblings]);
1211 		num_siblings++;
1212 	}
1213 
1214 	switch (flag) {
1215 	case COMMON_TXDMA_CFG:
1216 		prop = "txdma-cfg";
1217 		break;
1218 	case COMMON_RXDMA_CFG:
1219 		prop = "rxdma-cfg";
1220 		break;
1221 	case COMMON_RXDMA_GRP_CFG:
1222 		prop = "rxdma-grp-cfg";
1223 		break;
1224 	case COMMON_CLASS_CFG:
1225 		status = nxge_cfg_verify_set_classify(nxgep, c_dip);
1226 		return (status);
1227 	default:
1228 		return (NXGE_ERROR);
1229 	}
1230 
1231 	i = 0;
1232 	while (i < num_siblings) {
1233 		if (ddi_prop_lookup_string(DDI_DEV_T_ANY, c_dip[i], 0, prop,
1234 				(char **)&prop_val[i]) == DDI_PROP_SUCCESS) {
1235 			c_token[i] = nxge_get_config_token(prop_val[i]);
1236 			ddi_prop_free(prop_val[i]);
1237 			found++;
1238 		} else
1239 			c_token[i] = CONFIG_TOKEN_NONE;
1240 		i++;
1241 	}
1242 
1243 	if (found != i) {
1244 		if (found == 0) {
1245 			/* not specified: Use default */
1246 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1247 				" property %s not specified on any port:"
1248 					" Using default", prop));
1249 
1250 			status = nxge_update_cfg_properties(nxgep,
1251 				flag, FAIR, c_dip);
1252 			return (status);
1253 		} else {
1254 			/*
1255 			 * if  the convention is to use function 0 device then
1256 			 * populate the other devices with this configuration.
1257 			 *
1258 			 * The other alternative is to use the default config.
1259 			 */
1260 			/* not specified: Use default */
1261 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1262 				" property %s not specified on some ports:"
1263 				" Using default", prop));
1264 			status = nxge_update_cfg_properties(nxgep,
1265 				flag, FAIR, c_dip);
1266 			return (status);
1267 		}
1268 	}
1269 
1270 	/* check type and consistence */
1271 	/* found on all devices */
1272 	for (i = 1; i < found; i++) {
1273 		if (c_token[i] != c_token[i - 1]) {
1274 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1275 				" property %s inconsistent:"
1276 				" Using default", prop));
1277 			status = nxge_update_cfg_properties(nxgep,
1278 				flag, FAIR, c_dip);
1279 			return (status);
1280 		}
1281 	}
1282 
1283 	/*
1284 	 * Found on all the ports check if it is custom configuration. if
1285 	 * custom, then verify consistence
1286 	 *
1287 	 * finally create soft properties
1288 	 */
1289 	status = nxge_update_cfg_properties(nxgep, flag, c_token[0], c_dip);
1290 	return (status);
1291 }
1292 
1293 nxge_status_t
1294 nxge_cfg_verify_set_quick_config(p_nxge_t nxgep)
1295 {
1296 	nxge_status_t status = NXGE_OK;
1297 	int ddi_status = DDI_SUCCESS;
1298 	char *prop_val;
1299 	char *rx_prop;
1300 	char *prop;
1301 	uint32_t cfg_value = CFG_NOT_SPECIFIED;
1302 	p_nxge_param_t param_arr;
1303 
1304 	param_arr = nxgep->param_arr;
1305 	rx_prop = param_arr[param_rx_quick_cfg].fcode_name;
1306 
1307 	prop = "rx-quick-cfg";
1308 
1309 	/*
1310 	 * good value are
1311 	 *
1312 	 * "web-server" "generic-server" "l3-classify" "flow-classify"
1313 	 */
1314 	if (ddi_prop_lookup_string(DDI_DEV_T_ANY, nxgep->dip, 0,
1315 			prop, (char **)&prop_val) != DDI_PROP_SUCCESS) {
1316 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1317 			" property %s not specified: using default ", prop));
1318 		cfg_value = CFG_NOT_SPECIFIED;
1319 	} else {
1320 		cfg_value = CFG_L3_DISTRIBUTE;
1321 		if (strncmp("web-server", (caddr_t)prop_val, 8) == 0) {
1322 			cfg_value = CFG_L3_WEB;
1323 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1324 				" %s: web server ", prop));
1325 		}
1326 		if (strncmp("generic-server", (caddr_t)prop_val, 8) == 0) {
1327 			cfg_value = CFG_L3_DISTRIBUTE;
1328 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
1329 				" %s: distribute ", prop));
1330 		}
1331 		/* more */
1332 		ddi_prop_free(prop_val);
1333 	}
1334 
1335 	ddi_status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1336 		rx_prop, cfg_value);
1337 	if (ddi_status != DDI_PROP_SUCCESS)
1338 		status |= NXGE_DDI_FAILED;
1339 
1340 	/* now handle specified cases: */
1341 	if (status & NXGE_DDI_FAILED)
1342 		status |= NXGE_ERROR;
1343 	return (status);
1344 }
1345 
1346 static void
1347 nxge_use_cfg_link_cfg(p_nxge_t nxgep)
1348 {
1349 	int *prop_val;
1350 	uint_t prop_len;
1351 	dev_info_t *dip;
1352 	int speed;
1353 	int duplex;
1354 	int adv_autoneg_cap;
1355 	int adv_10gfdx_cap;
1356 	int adv_10ghdx_cap;
1357 	int adv_1000fdx_cap;
1358 	int adv_1000hdx_cap;
1359 	int adv_100fdx_cap;
1360 	int adv_100hdx_cap;
1361 	int adv_10fdx_cap;
1362 	int adv_10hdx_cap;
1363 	int status = DDI_SUCCESS;
1364 
1365 	dip = nxgep->dip;
1366 
1367 	/*
1368 	 * first find out the card type and the supported link speeds and
1369 	 * features
1370 	 */
1371 	/* add code for card type */
1372 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-autoneg-cap",
1373 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1374 		ddi_prop_free(prop_val);
1375 		return;
1376 	}
1377 
1378 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10gfdx-cap",
1379 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1380 		ddi_prop_free(prop_val);
1381 		return;
1382 	}
1383 
1384 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-1000hdx-cap",
1385 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1386 		ddi_prop_free(prop_val);
1387 		return;
1388 	}
1389 
1390 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-1000fdx-cap",
1391 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1392 		ddi_prop_free(prop_val);
1393 		return;
1394 	}
1395 
1396 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-100fdx-cap",
1397 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1398 		ddi_prop_free(prop_val);
1399 		return;
1400 	}
1401 
1402 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-100hdx-cap",
1403 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1404 		ddi_prop_free(prop_val);
1405 		return;
1406 	}
1407 
1408 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10fdx-cap",
1409 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1410 		ddi_prop_free(prop_val);
1411 		return;
1412 	}
1413 
1414 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, "adv-10hdx-cap",
1415 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1416 		ddi_prop_free(prop_val);
1417 		return;
1418 	}
1419 
1420 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0, "speed",
1421 			(uchar_t **)&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1422 		if (strncmp("10000", (caddr_t)prop_val,
1423 				(size_t)prop_len) == 0) {
1424 			speed = 10000;
1425 		} else if (strncmp("1000", (caddr_t)prop_val,
1426 				(size_t)prop_len) == 0) {
1427 			speed = 1000;
1428 		} else if (strncmp("100", (caddr_t)prop_val,
1429 				(size_t)prop_len) == 0) {
1430 			speed = 100;
1431 		} else if (strncmp("10", (caddr_t)prop_val,
1432 				(size_t)prop_len) == 0) {
1433 			speed = 10;
1434 		} else if (strncmp("auto", (caddr_t)prop_val,
1435 				(size_t)prop_len) == 0) {
1436 			speed = 0;
1437 		} else {
1438 			NXGE_ERROR_MSG((nxgep, NXGE_NOTE,
1439 				"speed property is invalid reverting to auto"));
1440 			speed = 0;
1441 		}
1442 		ddi_prop_free(prop_val);
1443 	} else
1444 		speed = 0;
1445 
1446 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, dip, 0, "duplex",
1447 			(uchar_t **)&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
1448 		if (strncmp("full", (caddr_t)prop_val,
1449 				(size_t)prop_len) == 0) {
1450 			duplex = 2;
1451 		} else if (strncmp("half", (caddr_t)prop_val,
1452 				(size_t)prop_len) == 0) {
1453 			duplex = 1;
1454 		} else if (strncmp("auto", (caddr_t)prop_val,
1455 				(size_t)prop_len) == 0) {
1456 			duplex = 0;
1457 		} else {
1458 			NXGE_ERROR_MSG((nxgep, NXGE_NOTE,
1459 				"duplex property is invalid"
1460 				" reverting to auto"));
1461 			duplex = 0;
1462 		}
1463 		ddi_prop_free(prop_val);
1464 	} else
1465 		duplex = 0;
1466 
1467 	adv_autoneg_cap = (speed == 0) || (duplex == 0);
1468 	if (adv_autoneg_cap == 0) {
1469 		adv_10gfdx_cap = ((speed == 10000) && (duplex == 2));
1470 		adv_10ghdx_cap = adv_10gfdx_cap;
1471 		adv_10ghdx_cap |= ((speed == 10000) && (duplex == 1));
1472 		adv_1000fdx_cap = adv_10ghdx_cap;
1473 		adv_1000fdx_cap |= ((speed == 1000) && (duplex == 2));
1474 		adv_1000hdx_cap = adv_1000fdx_cap;
1475 		adv_1000hdx_cap |= ((speed == 1000) && (duplex == 1));
1476 		adv_100fdx_cap = adv_1000hdx_cap;
1477 		adv_100fdx_cap |= ((speed == 100) && (duplex == 2));
1478 		adv_100hdx_cap = adv_100fdx_cap;
1479 		adv_100hdx_cap |= ((speed == 100) && (duplex == 1));
1480 		adv_10fdx_cap = adv_100hdx_cap;
1481 		adv_10fdx_cap |= ((speed == 10) && (duplex == 2));
1482 		adv_10hdx_cap = adv_10fdx_cap;
1483 		adv_10hdx_cap |= ((speed == 10) && (duplex == 1));
1484 	} else if (speed == 0) {
1485 		adv_10gfdx_cap = (duplex == 2);
1486 		adv_10ghdx_cap = (duplex == 1);
1487 		adv_1000fdx_cap = (duplex == 2);
1488 		adv_1000hdx_cap = (duplex == 1);
1489 		adv_100fdx_cap = (duplex == 2);
1490 		adv_100hdx_cap = (duplex == 1);
1491 		adv_10fdx_cap = (duplex == 2);
1492 		adv_10hdx_cap = (duplex == 1);
1493 	}
1494 	if (duplex == 0) {
1495 		adv_10gfdx_cap = (speed == 0);
1496 		adv_10gfdx_cap |= (speed == 10000);
1497 		adv_10ghdx_cap = adv_10gfdx_cap;
1498 		adv_10ghdx_cap |= (speed == 10000);
1499 		adv_1000fdx_cap = adv_10ghdx_cap;
1500 		adv_1000fdx_cap |= (speed == 1000);
1501 		adv_1000hdx_cap = adv_1000fdx_cap;
1502 		adv_1000hdx_cap |= (speed == 1000);
1503 		adv_100fdx_cap = adv_1000hdx_cap;
1504 		adv_100fdx_cap |= (speed == 100);
1505 		adv_100hdx_cap = adv_100fdx_cap;
1506 		adv_100hdx_cap |= (speed == 100);
1507 		adv_10fdx_cap = adv_100hdx_cap;
1508 		adv_10fdx_cap |= (speed == 10);
1509 		adv_10hdx_cap = adv_10fdx_cap;
1510 		adv_10hdx_cap |= (speed == 10);
1511 	}
1512 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1513 		"adv-autoneg-cap", &adv_autoneg_cap, 1);
1514 	if (status)
1515 		return;
1516 
1517 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1518 		"adv-10gfdx-cap", &adv_10gfdx_cap, 1);
1519 	if (status)
1520 		goto nxge_map_myargs_to_gmii_fail1;
1521 
1522 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1523 		"adv-10ghdx-cap", &adv_10ghdx_cap, 1);
1524 	if (status)
1525 		goto nxge_map_myargs_to_gmii_fail2;
1526 
1527 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1528 		"adv-1000fdx-cap", &adv_1000fdx_cap, 1);
1529 	if (status)
1530 		goto nxge_map_myargs_to_gmii_fail3;
1531 
1532 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1533 		"adv-1000hdx-cap", &adv_1000hdx_cap, 1);
1534 	if (status)
1535 		goto nxge_map_myargs_to_gmii_fail4;
1536 
1537 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1538 		"adv-100fdx-cap", &adv_100fdx_cap, 1);
1539 	if (status)
1540 		goto nxge_map_myargs_to_gmii_fail5;
1541 
1542 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1543 		"adv-100hdx-cap", &adv_100hdx_cap, 1);
1544 	if (status)
1545 		goto nxge_map_myargs_to_gmii_fail6;
1546 
1547 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1548 		"adv-10fdx-cap", &adv_10fdx_cap, 1);
1549 	if (status)
1550 		goto nxge_map_myargs_to_gmii_fail7;
1551 
1552 	status = ddi_prop_update_int_array(DDI_DEV_T_NONE, dip,
1553 		"adv-10hdx-cap", &adv_10hdx_cap, 1);
1554 	if (status)
1555 		goto nxge_map_myargs_to_gmii_fail8;
1556 
1557 	return;
1558 
1559 nxge_map_myargs_to_gmii_fail9:
1560 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10hdx-cap");
1561 
1562 nxge_map_myargs_to_gmii_fail8:
1563 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10fdx-cap");
1564 
1565 nxge_map_myargs_to_gmii_fail7:
1566 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-100hdx-cap");
1567 
1568 nxge_map_myargs_to_gmii_fail6:
1569 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-100fdx-cap");
1570 
1571 nxge_map_myargs_to_gmii_fail5:
1572 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-1000hdx-cap");
1573 
1574 nxge_map_myargs_to_gmii_fail4:
1575 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-1000fdx-cap");
1576 
1577 nxge_map_myargs_to_gmii_fail3:
1578 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10ghdx-cap");
1579 
1580 nxge_map_myargs_to_gmii_fail2:
1581 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-10gfdx-cap");
1582 
1583 nxge_map_myargs_to_gmii_fail1:
1584 	(void) ddi_prop_remove(DDI_DEV_T_NONE, dip, "adv-autoneg-cap");
1585 }
1586 
1587 nxge_status_t
1588 nxge_get_config_properties(p_nxge_t nxgep)
1589 {
1590 	nxge_status_t status = NXGE_OK;
1591 	p_nxge_hw_list_t hw_p;
1592 
1593 	NXGE_DEBUG_MSG((nxgep, VPD_CTL, " ==> nxge_get_config_properties"));
1594 
1595 	if ((hw_p = nxgep->nxge_hw_p) == NULL) {
1596 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1597 			" nxge_get_config_properties:"
1598 			" common hardware not set", nxgep->niu_type));
1599 		return (NXGE_ERROR);
1600 	}
1601 
1602 	/*
1603 	 * Get info on how many ports Neptune card has.
1604 	 */
1605 	switch (nxgep->niu_type) {
1606 	case N2_NIU:
1607 		nxgep->nports = 2;
1608 		nxgep->classifier.tcam_size = TCAM_NIU_TCAM_MAX_ENTRY;
1609 		if (nxgep->function_num > 1) {
1610 			return (NXGE_ERROR);
1611 		}
1612 		break;
1613 
1614 	case NEPTUNE_2:
1615 	case NEPTUNE:
1616 	default:
1617 
1618 		if ((nxgep->niu_type == NEPTUNE_2) &&
1619 				(nxgep->function_num > 1)) {
1620 			return (NXGE_ERROR);
1621 		}
1622 		if (!nxgep->vpd_info.ver_valid) {
1623 			status = nxge_espc_num_ports_get(nxgep);
1624 			if (status != NXGE_OK) {
1625 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1626 				    "EEPROM version [%s] invalid...please "
1627 				    "update", nxgep->vpd_info.ver));
1628 				return (status);
1629 			}
1630 			nxgep->classifier.tcam_size = TCAM_NXGE_TCAM_MAX_ENTRY;
1631 			break;
1632 		}
1633 		/*
1634 		 * First try to get the no. of ports from the info
1635 		 * in the VPD read off the EEPROM.
1636 		 */
1637 		if ((strncmp(nxgep->vpd_info.bd_model, NXGE_QGC_LP_BM_STR,
1638 		    strlen(NXGE_QGC_LP_BM_STR)) == 0) ||
1639 		    (strncmp(nxgep->vpd_info.bd_model, NXGE_QGC_PEM_BM_STR,
1640 		    strlen(NXGE_QGC_PEM_BM_STR)) == 0)) {
1641 			nxgep->nports = NXGE_NUM_OF_PORTS_QUAD;
1642 		} else if ((strncmp(nxgep->vpd_info.bd_model,
1643 		    NXGE_2XGF_LP_BM_STR, strlen(NXGE_2XGF_LP_BM_STR)) == 0) ||
1644 		    (strncmp(nxgep->vpd_info.bd_model, NXGE_2XGF_PEM_BM_STR,
1645 		    strlen(NXGE_2XGF_PEM_BM_STR)) == 0)) {
1646 			nxgep->nports = NXGE_NUM_OF_PORTS_DUAL;
1647 		} else {
1648 			NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1649 			    "nxge_get_config_properties: port num not set in"
1650 			    " EEPROM...Reading from SEEPROM"));
1651 			status = nxge_espc_num_ports_get(nxgep);
1652 			if (status != NXGE_OK)
1653 				return (status);
1654 		}
1655 		nxgep->classifier.tcam_size = TCAM_NXGE_TCAM_MAX_ENTRY;
1656 		break;
1657 	}
1658 
1659 	status = nxge_get_mac_addr_properties(nxgep);
1660 	if (status != NXGE_OK)
1661 		return (NXGE_ERROR);
1662 
1663 	/*
1664 	 * read the configuration type. If none is specified, used default.
1665 	 * Config types: equal: (default) DMA channels, RDC groups, TCAM, FCRAM
1666 	 * are shared equally across all the ports.
1667 	 *
1668 	 * Fair: DMA channels, RDC groups, TCAM, FCRAM are shared proportional
1669 	 * to the port speed.
1670 	 *
1671 	 *
1672 	 * custom: DMA channels, RDC groups, TCAM, FCRAM partition is
1673 	 * specified in nxge.conf. Need to read each parameter and set
1674 	 * up the parameters in nxge structures.
1675 	 *
1676 	 */
1677 	switch (nxgep->niu_type) {
1678 	case N2_NIU:
1679 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1680 			" ==> nxge_get_config_properties: N2"));
1681 		MUTEX_ENTER(&hw_p->nxge_cfg_lock);
1682 		if ((hw_p->flags & COMMON_CFG_VALID) !=
1683 			COMMON_CFG_VALID) {
1684 			status = nxge_cfg_verify_set(nxgep,
1685 				COMMON_RXDMA_GRP_CFG);
1686 			status = nxge_cfg_verify_set(nxgep,
1687 				COMMON_CLASS_CFG);
1688 			hw_p->flags |= COMMON_CFG_VALID;
1689 		}
1690 		MUTEX_EXIT(&hw_p->nxge_cfg_lock);
1691 		status = nxge_use_cfg_n2niu_properties(nxgep);
1692 		break;
1693 
1694 	case NEPTUNE:
1695 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1696 			" ==> nxge_get_config_properties: Neptune"));
1697 		status = nxge_cfg_verify_set_quick_config(nxgep);
1698 		MUTEX_ENTER(&hw_p->nxge_cfg_lock);
1699 		if ((hw_p->flags & COMMON_CFG_VALID) !=
1700 			COMMON_CFG_VALID) {
1701 			status = nxge_cfg_verify_set(nxgep,
1702 				COMMON_TXDMA_CFG);
1703 			status = nxge_cfg_verify_set(nxgep,
1704 				COMMON_RXDMA_CFG);
1705 			status = nxge_cfg_verify_set(nxgep,
1706 				COMMON_RXDMA_GRP_CFG);
1707 			status = nxge_cfg_verify_set(nxgep,
1708 				COMMON_CLASS_CFG);
1709 			hw_p->flags |= COMMON_CFG_VALID;
1710 		}
1711 		MUTEX_EXIT(&hw_p->nxge_cfg_lock);
1712 		nxge_use_cfg_neptune_properties(nxgep);
1713 		status = NXGE_OK;
1714 		break;
1715 
1716 	case NEPTUNE_2:
1717 		NXGE_DEBUG_MSG((nxgep, VPD_CTL,
1718 			" ==> nxge_get_config_properties: Neptune-2"));
1719 		if (nxgep->function_num > 1)
1720 			return (NXGE_ERROR);
1721 		status = nxge_cfg_verify_set_quick_config(nxgep);
1722 		MUTEX_ENTER(&hw_p->nxge_cfg_lock);
1723 
1724 		if ((hw_p->flags & COMMON_CFG_VALID) !=
1725 			COMMON_CFG_VALID) {
1726 			status = nxge_cfg_verify_set(nxgep,
1727 				COMMON_TXDMA_CFG);
1728 			status = nxge_cfg_verify_set(nxgep,
1729 				COMMON_RXDMA_CFG);
1730 			status = nxge_cfg_verify_set(nxgep,
1731 				COMMON_RXDMA_GRP_CFG);
1732 			status = nxge_cfg_verify_set(nxgep,
1733 				COMMON_CLASS_CFG);
1734 			hw_p->flags |= COMMON_CFG_VALID;
1735 		}
1736 		MUTEX_EXIT(&hw_p->nxge_cfg_lock);
1737 
1738 		nxge_use_cfg_neptune_properties(nxgep);
1739 		status = NXGE_OK;
1740 		break;
1741 
1742 	default:
1743 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1744 			" nxge_get_config_properties:"
1745 			" unknown NIU type %x", nxgep->niu_type));
1746 		return (NXGE_ERROR);
1747 	}
1748 
1749 	NXGE_DEBUG_MSG((nxgep, VPD_CTL, " <== nxge_get_config_properties"));
1750 	return (status);
1751 }
1752 
1753 static nxge_status_t
1754 nxge_use_cfg_n2niu_properties(p_nxge_t nxgep)
1755 {
1756 	nxge_status_t status = NXGE_OK;
1757 
1758 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_n2niu_properties"));
1759 
1760 	status = nxge_use_default_dma_config_n2(nxgep);
1761 	if (status != NXGE_OK) {
1762 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1763 			" ==> nxge_use_cfg_n2niu_properties (err 0x%x)",
1764 			status));
1765 		return (status | NXGE_ERROR);
1766 	}
1767 
1768 	(void) nxge_use_cfg_vlan_class_config(nxgep);
1769 	(void) nxge_use_cfg_mac_class_config(nxgep);
1770 	(void) nxge_use_cfg_class_config(nxgep);
1771 	(void) nxge_use_cfg_link_cfg(nxgep);
1772 
1773 	/*
1774 	 * Read in the hardware (fcode) properties. Use the ndd array to read
1775 	 * each property.
1776 	 */
1777 	(void) nxge_get_param_soft_properties(nxgep);
1778 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_n2niu_properties"));
1779 
1780 	return (status);
1781 }
1782 
1783 static void
1784 nxge_use_cfg_neptune_properties(p_nxge_t nxgep)
1785 {
1786 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_neptune_properties"));
1787 
1788 	(void) nxge_use_cfg_dma_config(nxgep);
1789 	(void) nxge_use_cfg_vlan_class_config(nxgep);
1790 	(void) nxge_use_cfg_mac_class_config(nxgep);
1791 	(void) nxge_use_cfg_class_config(nxgep);
1792 	(void) nxge_use_cfg_link_cfg(nxgep);
1793 
1794 	/*
1795 	 * Read in the hardware (fcode) properties. Use the ndd array to read
1796 	 * each property.
1797 	 */
1798 	(void) nxge_get_param_soft_properties(nxgep);
1799 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_neptune_properties"));
1800 }
1801 
1802 /*
1803  * FWARC 2006/556
1804  */
1805 
1806 static nxge_status_t
1807 nxge_use_default_dma_config_n2(p_nxge_t nxgep)
1808 {
1809 	int ndmas;
1810 	int nrxgp;
1811 	uint8_t func;
1812 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
1813 	p_nxge_hw_pt_cfg_t p_cfgp;
1814 	int *prop_val;
1815 	uint_t prop_len;
1816 	int i;
1817 	nxge_status_t status = NXGE_OK;
1818 
1819 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2"));
1820 
1821 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
1822 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
1823 
1824 	func = nxgep->function_num;
1825 	p_cfgp->function_number = func;
1826 	ndmas = NXGE_TDMA_PER_NIU_PORT;
1827 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1828 			"tx-dma-channels", (int **)&prop_val,
1829 			&prop_len) == DDI_PROP_SUCCESS) {
1830 		p_cfgp->start_tdc = prop_val[0];
1831 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1832 			"==> nxge_use_default_dma_config_n2: tdc starts %d "
1833 			"(#%d)", p_cfgp->start_tdc, prop_len));
1834 
1835 		ndmas = prop_val[1];
1836 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1837 			"==> nxge_use_default_dma_config_n2: #tdc %d (#%d)",
1838 			ndmas, prop_len));
1839 		ddi_prop_free(prop_val);
1840 	} else {
1841 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1842 			"==> nxge_use_default_dma_config_n2: "
1843 			"get tx-dma-channels failed"));
1844 		return (NXGE_DDI_FAILED);
1845 	}
1846 
1847 	p_cfgp->max_tdcs = nxgep->max_tdcs = ndmas;
1848 	nxgep->tdc_mask = (ndmas - 1);
1849 
1850 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1851 		"p_cfgp 0x%llx max_tdcs %d nxgep->max_tdcs %d start %d",
1852 		p_cfgp, p_cfgp->max_tdcs, nxgep->max_tdcs, p_cfgp->start_tdc));
1853 
1854 	/* Receive DMA */
1855 	ndmas = NXGE_RDMA_PER_NIU_PORT;
1856 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1857 			"rx-dma-channels", (int **)&prop_val,
1858 			&prop_len) == DDI_PROP_SUCCESS) {
1859 		p_cfgp->start_rdc = prop_val[0];
1860 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1861 			"==> nxge_use_default_dma_config_n2(obp): rdc start %d"
1862 			" (#%d)", p_cfgp->start_rdc, prop_len));
1863 		ndmas = prop_val[1];
1864 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1865 			"==> nxge_use_default_dma_config_n2(obp):#rdc %d (#%d)",
1866 			ndmas, prop_len));
1867 		ddi_prop_free(prop_val);
1868 	} else {
1869 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1870 			"==> nxge_use_default_dma_config_n2: "
1871 			"get rx-dma-channel failed"));
1872 		return (NXGE_DDI_FAILED);
1873 	}
1874 
1875 	p_cfgp->max_rdcs = nxgep->max_rdcs = ndmas;
1876 	nxgep->rdc_mask = (ndmas - 1);
1877 
1878 	/* Hypervisor: rdc # and group # use the same # !! */
1879 	p_cfgp->max_grpids = p_cfgp->max_rdcs + p_cfgp->max_tdcs;
1880 	p_cfgp->start_grpid = 0;
1881 	p_cfgp->mif_ldvid = p_cfgp->mac_ldvid = p_cfgp->ser_ldvid = 0;
1882 
1883 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0,
1884 			"interrupts", (int **)&prop_val,
1885 			&prop_len) == DDI_PROP_SUCCESS) {
1886 		/*
1887 		 * For each device assigned, the content of each interrupts
1888 		 * property is its logical device group.
1889 		 *
1890 		 * Assignment of interrupts property is in the the following
1891 		 * order:
1892 		 *
1893 		 * MAC MIF (if configured) SYSTEM ERROR (if configured) first
1894 		 * receive channel next channel...... last receive channel
1895 		 * first transmit channel next channel...... last transmit
1896 		 * channel
1897 		 *
1898 		 * prop_len should be at least for one mac and total # of rx and
1899 		 * tx channels. Function 0 owns MIF and ERROR
1900 		 */
1901 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1902 			"==> nxge_use_default_dma_config_n2(obp): "
1903 			"# interrupts %d", prop_len));
1904 
1905 		switch (func) {
1906 		case 0:
1907 			p_cfgp->ldg_chn_start = 3;
1908 			p_cfgp->mac_ldvid = NXGE_MAC_LD_PORT0;
1909 			p_cfgp->mif_ldvid = NXGE_MIF_LD;
1910 			p_cfgp->ser_ldvid = NXGE_SYS_ERROR_LD;
1911 
1912 			break;
1913 		case 1:
1914 			p_cfgp->ldg_chn_start = 1;
1915 			p_cfgp->mac_ldvid = NXGE_MAC_LD_PORT1;
1916 
1917 			break;
1918 		default:
1919 			status = NXGE_DDI_FAILED;
1920 			break;
1921 		}
1922 
1923 		if (status != NXGE_OK)
1924 			return (status);
1925 
1926 		for (i = 0; i < prop_len; i++) {
1927 			p_cfgp->ldg[i] = prop_val[i];
1928 			NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1929 				"==> nxge_use_default_dma_config_n2(obp): "
1930 				"interrupt #%d, ldg %d",
1931 				i, p_cfgp->ldg[i]));
1932 		}
1933 
1934 		p_cfgp->max_grpids = prop_len;
1935 		NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1936 			"==> nxge_use_default_dma_config_n2(obp): %d "
1937 			"(#%d) maxgrpids %d channel starts %d",
1938 			p_cfgp->mac_ldvid, i, p_cfgp->max_grpids,
1939 			p_cfgp->ldg_chn_start));
1940 		ddi_prop_free(prop_val);
1941 	} else {
1942 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
1943 			"==> nxge_use_default_dma_config_n2: "
1944 			"get interrupts failed"));
1945 		return (NXGE_DDI_FAILED);
1946 	}
1947 
1948 	p_cfgp->max_ldgs = p_cfgp->max_grpids;
1949 	NXGE_DEBUG_MSG((nxgep, OBP_CTL,
1950 		"==> nxge_use_default_dma_config_n2: "
1951 		"p_cfgp 0x%llx max_rdcs %d nxgep->max_rdcs %d max_grpids %d"
1952 		"start_grpid %d macid %d mifid %d serrid %d",
1953 		p_cfgp, p_cfgp->max_rdcs, nxgep->max_rdcs, p_cfgp->max_grpids,
1954 		p_cfgp->start_grpid,
1955 		p_cfgp->mac_ldvid, p_cfgp->mif_ldvid, p_cfgp->ser_ldvid));
1956 
1957 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1958 		"p_cfgp p%p start_ldg %d nxgep->max_ldgs %d",
1959 		p_cfgp, p_cfgp->start_ldg, p_cfgp->max_ldgs));
1960 
1961 	/*
1962 	 * RDC groups and the beginning RDC group assigned to this function.
1963 	 */
1964 	nrxgp = 2;
1965 	p_cfgp->max_rdc_grpids = nrxgp;
1966 	p_cfgp->start_rdc_grpid = (nxgep->function_num * nrxgp);
1967 
1968 	status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1969 		"rx-rdc-grps", nrxgp);
1970 	if (status) {
1971 		return (NXGE_DDI_FAILED);
1972 	}
1973 	status = ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
1974 		"rx-rdc-grps-begin", p_cfgp->start_rdc_grpid);
1975 	if (status) {
1976 		(void) ddi_prop_remove(DDI_DEV_T_NONE, nxgep->dip,
1977 			"rx-rdc-grps");
1978 		return (NXGE_DDI_FAILED);
1979 	}
1980 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "==> nxge_use_default_dma_config_n2: "
1981 		"p_cfgp $%p # rdc groups %d start rdc group id %d",
1982 		p_cfgp, p_cfgp->max_rdc_grpids,
1983 		p_cfgp->start_rdc_grpid));
1984 
1985 	nxge_set_hw_dma_config(nxgep);
1986 	NXGE_DEBUG_MSG((nxgep, OBP_CTL, "<== nxge_use_default_dma_config_n2"));
1987 	return (status);
1988 }
1989 
1990 static void
1991 nxge_use_cfg_dma_config(p_nxge_t nxgep)
1992 {
1993 	int tx_ndmas, rx_ndmas, nrxgp;
1994 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
1995 	p_nxge_hw_pt_cfg_t p_cfgp;
1996 	dev_info_t *dip;
1997 	p_nxge_param_t param_arr;
1998 	char *prop;
1999 	int *prop_val;
2000 	uint_t prop_len;
2001 
2002 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_dma_config"));
2003 	param_arr = nxgep->param_arr;
2004 
2005 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2006 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2007 	dip = nxgep->dip;
2008 	p_cfgp->function_number = nxgep->function_num;
2009 	prop = param_arr[param_txdma_channels_begin].fcode_name;
2010 
2011 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2012 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2013 		p_cfgp->start_tdc = *prop_val;
2014 		ddi_prop_free(prop_val);
2015 	} else {
2016 		if (nxgep->nports == 2) {
2017 			tx_ndmas = (nxgep->function_num * p2_tx_equal[0]);
2018 		} else {
2019 			tx_ndmas = (nxgep->function_num * p4_tx_equal[0]);
2020 		}
2021 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2022 			prop, tx_ndmas);
2023 		p_cfgp->start_tdc = tx_ndmas;
2024 	}
2025 
2026 	prop = param_arr[param_txdma_channels].fcode_name;
2027 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2028 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2029 		tx_ndmas = *prop_val;
2030 		ddi_prop_free(prop_val);
2031 	} else {
2032 		if (nxgep->nports == 2) {
2033 			tx_ndmas = p2_tx_equal[0];
2034 		} else {
2035 			tx_ndmas = p4_tx_equal[0];
2036 		}
2037 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2038 			prop, tx_ndmas);
2039 	}
2040 
2041 	p_cfgp->max_tdcs = nxgep->max_tdcs = tx_ndmas;
2042 	nxgep->tdc_mask = (tx_ndmas - 1);
2043 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_dma_config: "
2044 		"p_cfgp 0x%llx max_tdcs %d nxgep->max_tdcs %d",
2045 		p_cfgp, p_cfgp->max_tdcs, nxgep->max_tdcs));
2046 
2047 	prop = param_arr[param_rxdma_channels_begin].fcode_name;
2048 
2049 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2050 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2051 		p_cfgp->start_rdc = *prop_val;
2052 		ddi_prop_free(prop_val);
2053 	} else {
2054 		if (nxgep->nports == 2) {
2055 			rx_ndmas = (nxgep->function_num * p2_rx_equal[0]);
2056 		} else {
2057 			rx_ndmas = (nxgep->function_num * p4_rx_equal[0]);
2058 		}
2059 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2060 			prop, rx_ndmas);
2061 		p_cfgp->start_rdc = rx_ndmas;
2062 	}
2063 
2064 	prop = param_arr[param_rxdma_channels].fcode_name;
2065 
2066 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2067 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2068 		rx_ndmas = *prop_val;
2069 		ddi_prop_free(prop_val);
2070 	} else {
2071 		if (nxgep->nports == 2) {
2072 			rx_ndmas = p2_rx_equal[0];
2073 		} else {
2074 			rx_ndmas = p4_rx_equal[0];
2075 		}
2076 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2077 			prop, rx_ndmas);
2078 	}
2079 
2080 	p_cfgp->max_rdcs = nxgep->max_rdcs = rx_ndmas;
2081 
2082 	prop = param_arr[param_rdc_grps_start].fcode_name;
2083 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2084 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2085 		p_cfgp->start_rdc_grpid = *prop_val;
2086 		ddi_prop_free(prop_val);
2087 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2088 			"==> nxge_use_default_dma_config: "
2089 			"use property " "start_grpid %d ",
2090 			p_cfgp->start_grpid));
2091 	} else {
2092 		p_cfgp->start_rdc_grpid = nxgep->function_num;
2093 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2094 			prop, p_cfgp->start_rdc_grpid);
2095 
2096 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2097 			"==> nxge_use_default_dma_config: "
2098 			"use default "
2099 			"start_grpid %d (same as function #)",
2100 			p_cfgp->start_grpid));
2101 	}
2102 
2103 	prop = param_arr[param_rx_rdc_grps].fcode_name;
2104 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2105 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2106 		nrxgp = *prop_val;
2107 		ddi_prop_free(prop_val);
2108 	} else {
2109 		nrxgp = 1;
2110 		(void) ddi_prop_update_int(DDI_DEV_T_NONE, nxgep->dip,
2111 			prop, nrxgp);
2112 		NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2113 			"==> nxge_use_default_dma_config: "
2114 			"num_rdc_grpid not found: use def:# of "
2115 			"rdc groups %d\n", nrxgp));
2116 	}
2117 
2118 	p_cfgp->max_rdc_grpids = nrxgp;
2119 
2120 	/*
2121 	 * 2/4 ports have the same hard-wired logical groups assigned.
2122 	 */
2123 	p_cfgp->start_ldg = nxgep->function_num * NXGE_LDGRP_PER_4PORTS;
2124 	p_cfgp->max_ldgs = NXGE_LDGRP_PER_4PORTS;
2125 
2126 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_default_dma_config: "
2127 		"p_cfgp 0x%llx max_rdcs %d nxgep->max_rdcs %d max_grpids %d"
2128 		"start_grpid %d",
2129 		p_cfgp, p_cfgp->max_rdcs, nxgep->max_rdcs, p_cfgp->max_grpids,
2130 		p_cfgp->start_grpid));
2131 
2132 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_dma_config: "
2133 		"p_cfgp 0x%016llx start_ldg %d nxgep->max_ldgs %d "
2134 		"start_rdc_grpid %d",
2135 		p_cfgp, p_cfgp->start_ldg, p_cfgp->max_ldgs,
2136 		p_cfgp->start_rdc_grpid));
2137 
2138 	prop = param_arr[param_rxdma_intr_time].fcode_name;
2139 
2140 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2141 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2142 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2143 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2144 				nxgep->dip, prop, prop_val, prop_len);
2145 		}
2146 		ddi_prop_free(prop_val);
2147 	}
2148 	prop = param_arr[param_rxdma_intr_pkts].fcode_name;
2149 
2150 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, dip, 0, prop,
2151 			&prop_val, &prop_len) == DDI_PROP_SUCCESS) {
2152 		if ((prop_len > 0) && (prop_len <= p_cfgp->max_rdcs)) {
2153 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2154 				nxgep->dip, prop, prop_val, prop_len);
2155 		}
2156 		ddi_prop_free(prop_val);
2157 	}
2158 	nxge_set_hw_dma_config(nxgep);
2159 
2160 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_use_cfg_dma_config"));
2161 }
2162 
2163 static void
2164 nxge_use_cfg_vlan_class_config(p_nxge_t nxgep)
2165 {
2166 	uint_t vlan_cnt;
2167 	int *vlan_cfg_val;
2168 	int status;
2169 	p_nxge_param_t param_arr;
2170 	char *prop;
2171 
2172 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_use_cfg_vlan_config"));
2173 	param_arr = nxgep->param_arr;
2174 	prop = param_arr[param_vlan_2rdc_grp].fcode_name;
2175 
2176 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2177 		&vlan_cfg_val, &vlan_cnt);
2178 	if (status == DDI_PROP_SUCCESS) {
2179 		status = ddi_prop_update_int_array(DDI_DEV_T_NONE,
2180 			nxgep->dip, prop, vlan_cfg_val, vlan_cnt);
2181 		ddi_prop_free(vlan_cfg_val);
2182 	}
2183 	nxge_set_hw_vlan_class_config(nxgep);
2184 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_vlan_config"));
2185 }
2186 
2187 static void
2188 nxge_use_cfg_mac_class_config(p_nxge_t nxgep)
2189 {
2190 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2191 	p_nxge_hw_pt_cfg_t p_cfgp;
2192 	uint_t mac_cnt;
2193 	int *mac_cfg_val;
2194 	int status;
2195 	p_nxge_param_t param_arr;
2196 	char *prop;
2197 
2198 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_use_cfg_mac_class_config"));
2199 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2200 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2201 	p_cfgp->start_mac_entry = 0;
2202 	param_arr = nxgep->param_arr;
2203 	prop = param_arr[param_mac_2rdc_grp].fcode_name;
2204 
2205 	switch (nxgep->function_num) {
2206 	case 0:
2207 	case 1:
2208 		/* 10G ports */
2209 		p_cfgp->max_macs = NXGE_MAX_MACS_XMACS;
2210 		break;
2211 	case 2:
2212 	case 3:
2213 		/* 1G ports */
2214 	default:
2215 		p_cfgp->max_macs = NXGE_MAX_MACS_BMACS;
2216 		break;
2217 	}
2218 
2219 	p_cfgp->mac_pref = 1;
2220 	p_cfgp->def_mac_rxdma_grpid = p_cfgp->start_rdc_grpid;
2221 
2222 	NXGE_DEBUG_MSG((nxgep, OBP_CTL,
2223 		"== nxge_use_cfg_mac_class_config: "
2224 		" mac_pref bit set def_mac_rxdma_grpid %d",
2225 		p_cfgp->def_mac_rxdma_grpid));
2226 
2227 	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2228 		&mac_cfg_val, &mac_cnt);
2229 	if (status == DDI_PROP_SUCCESS) {
2230 		if (mac_cnt <= p_cfgp->max_macs)
2231 			status = ddi_prop_update_int_array(DDI_DEV_T_NONE,
2232 				nxgep->dip, prop, mac_cfg_val, mac_cnt);
2233 		ddi_prop_free(mac_cfg_val);
2234 	}
2235 	nxge_set_hw_mac_class_config(nxgep);
2236 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_use_cfg_mac_class_config"));
2237 }
2238 
2239 static void
2240 nxge_use_cfg_class_config(p_nxge_t nxgep)
2241 {
2242 	nxge_set_hw_class_config(nxgep);
2243 }
2244 
2245 static void
2246 nxge_set_rdc_intr_property(p_nxge_t nxgep)
2247 {
2248 	int i;
2249 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2250 
2251 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_rdc_intr_property"));
2252 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2253 
2254 	for (i = 0; i < NXGE_MAX_RDCS; i++) {
2255 		p_dma_cfgp->rcr_timeout[i] = nxge_rcr_timeout;
2256 		p_dma_cfgp->rcr_threshold[i] = nxge_rcr_threshold;
2257 	}
2258 
2259 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_rdc_intr_property"));
2260 }
2261 
2262 static void
2263 nxge_set_hw_dma_config(p_nxge_t nxgep)
2264 {
2265 	int i, j, rdc, ndmas, ngrps, bitmap, end, st_rdc;
2266 	int32_t status;
2267 	uint8_t rdcs_per_grp;
2268 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2269 	p_nxge_hw_pt_cfg_t p_cfgp;
2270 	p_nxge_rdc_grp_t rdc_grp_p;
2271 	int rdcgrp_cfg = CFG_NOT_SPECIFIED, rx_quick_cfg;
2272 	char *prop, *prop_val;
2273 	p_nxge_param_t param_arr;
2274 	config_token_t token;
2275 
2276 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_set_hw_dma_config"));
2277 
2278 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2279 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2280 	rdc_grp_p = p_dma_cfgp->rdc_grps;
2281 
2282 	/* Transmit DMA Channels */
2283 	bitmap = 0;
2284 	end = p_cfgp->start_tdc + p_cfgp->max_tdcs;
2285 	nxgep->ntdc = p_cfgp->max_tdcs;
2286 	p_dma_cfgp->tx_dma_map = 0;
2287 	for (i = p_cfgp->start_tdc; i < end; i++) {
2288 		bitmap |= (1 << i);
2289 		nxgep->tdc[i - p_cfgp->start_tdc] = (uint8_t)i;
2290 	}
2291 
2292 	p_dma_cfgp->tx_dma_map = bitmap;
2293 	param_arr = nxgep->param_arr;
2294 
2295 	/* Assume RDCs are evenly distributed */
2296 	rx_quick_cfg = param_arr[param_rx_quick_cfg].value;
2297 	switch (rx_quick_cfg) {
2298 	case CFG_NOT_SPECIFIED:
2299 		prop = "rxdma-grp-cfg";
2300 		status = ddi_prop_lookup_string(DDI_DEV_T_NONE,
2301 			nxgep->dip, 0, prop, (char **)&prop_val);
2302 		if (status != DDI_PROP_SUCCESS) {
2303 			NXGE_DEBUG_MSG((nxgep, CFG_CTL,
2304 				" property %s not found", prop));
2305 			rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2306 		} else {
2307 			token = nxge_get_config_token(prop_val);
2308 			switch (token) {
2309 			case L2_CLASSIFY:
2310 				break;
2311 			case CLASSIFY:
2312 			case L3_CLASSIFY:
2313 			case L3_DISTRIBUTE:
2314 			case L3_TCAM:
2315 				rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2316 				break;
2317 			default:
2318 				rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2319 				break;
2320 			}
2321 			ddi_prop_free(prop_val);
2322 		}
2323 		break;
2324 	case CFG_L3_WEB:
2325 	case CFG_L3_DISTRIBUTE:
2326 	case CFG_L2_CLASSIFY:
2327 	case CFG_L3_TCAM:
2328 		rdcgrp_cfg = rx_quick_cfg;
2329 		break;
2330 	default:
2331 		rdcgrp_cfg = CFG_L3_DISTRIBUTE;
2332 		break;
2333 	}
2334 
2335 	/* Receive DMA Channels */
2336 	st_rdc = p_cfgp->start_rdc;
2337 	nxgep->nrdc = p_cfgp->max_rdcs;
2338 
2339 	for (i = 0; i < p_cfgp->max_rdcs; i++) {
2340 		nxgep->rdc[i] = i + p_cfgp->start_rdc;
2341 	}
2342 
2343 	switch (rdcgrp_cfg) {
2344 	case CFG_L3_DISTRIBUTE:
2345 	case CFG_L3_WEB:
2346 	case CFG_L3_TCAM:
2347 		ndmas = p_cfgp->max_rdcs;
2348 		ngrps = 1;
2349 		rdcs_per_grp = ndmas / ngrps;
2350 		break;
2351 	case CFG_L2_CLASSIFY:
2352 		ndmas = p_cfgp->max_rdcs / 2;
2353 		if (p_cfgp->max_rdcs < 2)
2354 			ndmas = 1;
2355 		ngrps = 1;
2356 		rdcs_per_grp = ndmas / ngrps;
2357 		break;
2358 	default:
2359 		ngrps = p_cfgp->max_rdc_grpids;
2360 		ndmas = p_cfgp->max_rdcs;
2361 		rdcs_per_grp = ndmas / ngrps;
2362 		break;
2363 	}
2364 
2365 	for (i = 0; i < ngrps; i++) {
2366 		rdc_grp_p = &p_dma_cfgp->rdc_grps[i];
2367 		rdc_grp_p->start_rdc = st_rdc + i * rdcs_per_grp;
2368 		rdc_grp_p->max_rdcs = rdcs_per_grp;
2369 
2370 		/* default to: 0, 1, 2, 3, ...., 0, 1, 2, 3.... */
2371 		rdc_grp_p->config_method = RDC_TABLE_ENTRY_METHOD_SEQ;
2372 		rdc = rdc_grp_p->start_rdc;
2373 		for (j = 0; j < NXGE_MAX_RDCS; j++) {
2374 			rdc_grp_p->rdc[j] = rdc++;
2375 			if (rdc == (rdc_grp_p->start_rdc + rdcs_per_grp)) {
2376 				rdc = rdc_grp_p->start_rdc;
2377 			}
2378 		}
2379 		rdc_grp_p->def_rdc = rdc_grp_p->rdc[0];
2380 		rdc_grp_p->flag = 1;	/* configured */
2381 	}
2382 
2383 	/* default RDC */
2384 	p_cfgp->def_rdc = p_cfgp->start_rdc;
2385 	nxgep->def_rdc = p_cfgp->start_rdc;
2386 
2387 	/* full 18 byte header ? */
2388 	p_dma_cfgp->rcr_full_header = NXGE_RCR_FULL_HEADER;
2389 	p_dma_cfgp->rx_drr_weight = PT_DRR_WT_DEFAULT_10G;
2390 	if (nxgep->function_num > 1)
2391 		p_dma_cfgp->rx_drr_weight = PT_DRR_WT_DEFAULT_1G;
2392 	p_dma_cfgp->rbr_size = nxge_rbr_size;
2393 	p_dma_cfgp->rcr_size = nxge_rcr_size;
2394 
2395 	nxge_set_rdc_intr_property(nxgep);
2396 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_hw_dma_config"));
2397 }
2398 
2399 boolean_t
2400 nxge_check_rxdma_port_member(p_nxge_t nxgep, uint8_t rdc)
2401 {
2402 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2403 	p_nxge_hw_pt_cfg_t p_cfgp;
2404 	int status = B_TRUE;
2405 
2406 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_rxdma_port_member"));
2407 
2408 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2409 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2410 
2411 	/* Receive DMA Channels */
2412 	if (rdc < p_cfgp->max_rdcs)
2413 		status = B_TRUE;
2414 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_rxdma_port_member"));
2415 	return (status);
2416 }
2417 
2418 boolean_t
2419 nxge_check_txdma_port_member(p_nxge_t nxgep, uint8_t tdc)
2420 {
2421 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2422 	p_nxge_hw_pt_cfg_t p_cfgp;
2423 	int status = B_FALSE;
2424 
2425 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_rxdma_port_member"));
2426 
2427 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2428 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2429 
2430 	/* Receive DMA Channels */
2431 	if (tdc < p_cfgp->max_tdcs)
2432 		status = B_TRUE;
2433 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_rxdma_port_member"));
2434 	return (status);
2435 }
2436 
2437 boolean_t
2438 nxge_check_rxdma_rdcgrp_member(p_nxge_t nxgep, uint8_t rdc_grp, uint8_t rdc)
2439 {
2440 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2441 	int status = B_TRUE;
2442 	p_nxge_rdc_grp_t rdc_grp_p;
2443 
2444 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2445 		" ==> nxge_check_rxdma_rdcgrp_member"));
2446 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "  nxge_check_rxdma_rdcgrp_member"
2447 		" rdc  %d group %d", rdc, rdc_grp));
2448 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2449 
2450 	rdc_grp_p = &p_dma_cfgp->rdc_grps[rdc_grp];
2451 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "  max  %d ", rdc_grp_p->max_rdcs));
2452 	if (rdc >= rdc_grp_p->max_rdcs) {
2453 		status = B_FALSE;
2454 	}
2455 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2456 		" <== nxge_check_rxdma_rdcgrp_member"));
2457 	return (status);
2458 }
2459 
2460 boolean_t
2461 nxge_check_rdcgrp_port_member(p_nxge_t nxgep, uint8_t rdc_grp)
2462 {
2463 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2464 	p_nxge_hw_pt_cfg_t p_cfgp;
2465 	int status = B_TRUE;
2466 
2467 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, "==> nxge_check_rdcgrp_port_member"));
2468 
2469 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2470 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2471 
2472 	if (rdc_grp >= p_cfgp->max_rdc_grpids)
2473 		status = B_FALSE;
2474 	NXGE_DEBUG_MSG((nxgep, CFG2_CTL, " <== nxge_check_rdcgrp_port_member"));
2475 	return (status);
2476 }
2477 
2478 static void
2479 nxge_set_hw_vlan_class_config(p_nxge_t nxgep)
2480 {
2481 	int i;
2482 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2483 	p_nxge_hw_pt_cfg_t p_cfgp;
2484 	p_nxge_param_t param_arr;
2485 	uint_t vlan_cnt;
2486 	int *vlan_cfg_val;
2487 	nxge_param_map_t *vmap;
2488 	char *prop;
2489 	p_nxge_class_pt_cfg_t p_class_cfgp;
2490 	uint32_t good_cfg[32];
2491 	int good_count = 0;
2492 	nxge_mv_cfg_t *vlan_tbl;
2493 
2494 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_hw_vlan_config"));
2495 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2496 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2497 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2498 
2499 	param_arr = nxgep->param_arr;
2500 	prop = param_arr[param_vlan_2rdc_grp].fcode_name;
2501 
2502 	/*
2503 	 * By default, VLAN to RDC group mapping is disabled Need to read HW or
2504 	 * .conf properties to find out if mapping is required
2505 	 *
2506 	 * Format
2507 	 *
2508 	 * uint32_t array, each array entry specifying the VLAN id and the
2509 	 * mapping
2510 	 *
2511 	 * bit[30] = add bit[29] = remove bit[28]  = preference bits[23-16] =
2512 	 * rdcgrp bits[15-0] = VLAN ID ( )
2513 	 */
2514 
2515 	for (i = 0; i < NXGE_MAX_VLANS; i++) {
2516 		p_class_cfgp->vlan_tbl[i].flag = 0;
2517 	}
2518 
2519 	vlan_tbl = (nxge_mv_cfg_t *)&p_class_cfgp->vlan_tbl[0];
2520 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2521 			&vlan_cfg_val, &vlan_cnt) == DDI_PROP_SUCCESS) {
2522 		for (i = 0; i < vlan_cnt; i++) {
2523 			vmap = (nxge_param_map_t *)&vlan_cfg_val[i];
2524 			if ((vmap->param_id) &&
2525 					(vmap->param_id < NXGE_MAX_VLANS) &&
2526 					(vmap->map_to <
2527 						p_cfgp->max_rdc_grpids) &&
2528 					(vmap->map_to >= (uint8_t)0)) {
2529 				NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2530 					" nxge_vlan_config mapping"
2531 					" id %d grp %d",
2532 					vmap->param_id, vmap->map_to));
2533 				good_cfg[good_count] = vlan_cfg_val[i];
2534 				if (vlan_tbl[vmap->param_id].flag == 0)
2535 					good_count++;
2536 				vlan_tbl[vmap->param_id].flag = 1;
2537 				vlan_tbl[vmap->param_id].rdctbl =
2538 					vmap->map_to + p_cfgp->start_rdc_grpid;
2539 				vlan_tbl[vmap->param_id].mpr_npr = vmap->pref;
2540 			}
2541 		}
2542 		ddi_prop_free(vlan_cfg_val);
2543 		if (good_count != vlan_cnt) {
2544 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2545 				nxgep->dip, prop, (int *)good_cfg, good_count);
2546 		}
2547 	}
2548 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_set_hw_vlan_config"));
2549 }
2550 
2551 static void
2552 nxge_set_hw_mac_class_config(p_nxge_t nxgep)
2553 {
2554 	int i;
2555 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2556 	p_nxge_hw_pt_cfg_t p_cfgp;
2557 	p_nxge_param_t param_arr;
2558 	uint_t mac_cnt;
2559 	int *mac_cfg_val;
2560 	nxge_param_map_t *mac_map;
2561 	char *prop;
2562 	p_nxge_class_pt_cfg_t p_class_cfgp;
2563 	int good_count = 0;
2564 	int good_cfg[NXGE_MAX_MACS];
2565 	nxge_mv_cfg_t *mac_host_info;
2566 
2567 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "==> nxge_set_hw_mac_config"));
2568 
2569 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2570 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2571 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2572 	mac_host_info = (nxge_mv_cfg_t *)&p_class_cfgp->mac_host_info[0];
2573 
2574 	param_arr = nxgep->param_arr;
2575 	prop = param_arr[param_mac_2rdc_grp].fcode_name;
2576 
2577 	for (i = 0; i < NXGE_MAX_MACS; i++) {
2578 		p_class_cfgp->mac_host_info[i].flag = 0;
2579 		p_class_cfgp->mac_host_info[i].rdctbl =
2580 		    p_cfgp->def_mac_rxdma_grpid;
2581 	}
2582 
2583 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2584 			&mac_cfg_val, &mac_cnt) == DDI_PROP_SUCCESS) {
2585 		for (i = 0; i < mac_cnt; i++) {
2586 			mac_map = (nxge_param_map_t *)&mac_cfg_val[i];
2587 			if ((mac_map->param_id < p_cfgp->max_macs) &&
2588 					(mac_map->map_to <
2589 						p_cfgp->max_rdc_grpids) &&
2590 					(mac_map->map_to >= (uint8_t)0)) {
2591 				NXGE_DEBUG_MSG((nxgep, CFG2_CTL,
2592 					" nxge_mac_config mapping"
2593 					" id %d grp %d",
2594 					mac_map->param_id, mac_map->map_to));
2595 				mac_host_info[mac_map->param_id].mpr_npr =
2596 					mac_map->pref;
2597 				mac_host_info[mac_map->param_id].rdctbl =
2598 					mac_map->map_to +
2599 					p_cfgp->start_rdc_grpid;
2600 				good_cfg[good_count] = mac_cfg_val[i];
2601 				if (mac_host_info[mac_map->param_id].flag == 0)
2602 					good_count++;
2603 				mac_host_info[mac_map->param_id].flag = 1;
2604 			}
2605 		}
2606 		ddi_prop_free(mac_cfg_val);
2607 		if (good_count != mac_cnt) {
2608 			(void) ddi_prop_update_int_array(DDI_DEV_T_NONE,
2609 				nxgep->dip, prop, good_cfg, good_count);
2610 		}
2611 	}
2612 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, "<== nxge_set_hw_mac_config"));
2613 }
2614 
2615 static void
2616 nxge_set_hw_class_config(p_nxge_t nxgep)
2617 {
2618 	int i;
2619 	p_nxge_param_t param_arr;
2620 	int *int_prop_val;
2621 	uint32_t cfg_value;
2622 	char *prop;
2623 	p_nxge_class_pt_cfg_t p_class_cfgp;
2624 	int start_prop, end_prop;
2625 	uint_t prop_cnt;
2626 
2627 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " ==> nxge_set_hw_class_config"));
2628 
2629 	p_class_cfgp = (p_nxge_class_pt_cfg_t)&nxgep->class_config;
2630 	param_arr = nxgep->param_arr;
2631 	start_prop = param_class_opt_ip_usr4;
2632 	end_prop = param_class_opt_ipv6_sctp;
2633 
2634 	for (i = start_prop; i <= end_prop; i++) {
2635 		prop = param_arr[i].fcode_name;
2636 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip,
2637 				0, prop, &int_prop_val,
2638 				&prop_cnt) == DDI_PROP_SUCCESS) {
2639 			cfg_value = (uint32_t)*int_prop_val;
2640 			ddi_prop_free(int_prop_val);
2641 		} else {
2642 			cfg_value = (uint32_t)param_arr[i].value;
2643 		}
2644 		p_class_cfgp->class_cfg[i - start_prop] = cfg_value;
2645 	}
2646 
2647 	prop = param_arr[param_h1_init_value].fcode_name;
2648 
2649 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2650 			&int_prop_val, &prop_cnt) == DDI_PROP_SUCCESS) {
2651 		cfg_value = (uint32_t)*int_prop_val;
2652 		ddi_prop_free(int_prop_val);
2653 	} else {
2654 		cfg_value = (uint32_t)param_arr[param_h1_init_value].value;
2655 	}
2656 
2657 	p_class_cfgp->init_h1 = (uint32_t)cfg_value;
2658 	prop = param_arr[param_h2_init_value].fcode_name;
2659 
2660 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, nxgep->dip, 0, prop,
2661 			&int_prop_val, &prop_cnt) == DDI_PROP_SUCCESS) {
2662 		cfg_value = (uint32_t)*int_prop_val;
2663 		ddi_prop_free(int_prop_val);
2664 	} else {
2665 		cfg_value = (uint32_t)param_arr[param_h2_init_value].value;
2666 	}
2667 
2668 	p_class_cfgp->init_h2 = (uint16_t)cfg_value;
2669 	NXGE_DEBUG_MSG((nxgep, CFG_CTL, " <== nxge_set_hw_class_config"));
2670 }
2671 
2672 nxge_status_t
2673 nxge_ldgv_init_n2(p_nxge_t nxgep, int *navail_p, int *nrequired_p)
2674 {
2675 	int i, maxldvs, maxldgs, start, end, nldvs;
2676 	int ldv, endldg;
2677 	uint8_t func;
2678 	uint8_t channel;
2679 	uint8_t chn_start;
2680 	boolean_t own_sys_err = B_FALSE, own_fzc = B_FALSE;
2681 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2682 	p_nxge_hw_pt_cfg_t p_cfgp;
2683 	p_nxge_ldgv_t ldgvp;
2684 	p_nxge_ldg_t ldgp, ptr;
2685 	p_nxge_ldv_t ldvp;
2686 	nxge_status_t status = NXGE_OK;
2687 
2688 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2"));
2689 	if (!*navail_p) {
2690 		*nrequired_p = 0;
2691 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2692 			"<== nxge_ldgv_init:no avail"));
2693 		return (NXGE_ERROR);
2694 	}
2695 	/*
2696 	 * N2/NIU: one logical device owns one logical group. and each
2697 	 * device/group will be assigned one vector by Hypervisor.
2698 	 */
2699 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2700 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2701 	maxldgs = p_cfgp->max_ldgs;
2702 	if (!maxldgs) {
2703 		/* No devices configured. */
2704 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_init_n2: "
2705 			"no logical groups configured."));
2706 		return (NXGE_ERROR);
2707 	} else {
2708 		maxldvs = maxldgs + 1;
2709 	}
2710 
2711 	/*
2712 	 * If function zero instance, it needs to handle the system and MIF
2713 	 * error interrupts. MIF interrupt may not be needed for N2/NIU.
2714 	 */
2715 	func = nxgep->function_num;
2716 	if (func == 0) {
2717 		own_sys_err = B_TRUE;
2718 		if (!p_cfgp->ser_ldvid) {
2719 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2720 				"nxge_ldgv_init_n2: func 0, ERR ID not set!"));
2721 		}
2722 		/* MIF interrupt */
2723 		if (!p_cfgp->mif_ldvid) {
2724 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2725 				"nxge_ldgv_init_n2: func 0, MIF ID not set!"));
2726 		}
2727 	}
2728 
2729 	/*
2730 	 * Assume single partition, each function owns mac.
2731 	 */
2732 	if (!nxge_use_partition)
2733 		own_fzc = B_TRUE;
2734 
2735 	ldgvp = nxgep->ldgvp;
2736 	if (ldgvp == NULL) {
2737 		ldgvp = KMEM_ZALLOC(sizeof (nxge_ldgv_t), KM_SLEEP);
2738 		nxgep->ldgvp = ldgvp;
2739 		ldgvp->maxldgs = (uint8_t)maxldgs;
2740 		ldgvp->maxldvs = (uint8_t)maxldvs;
2741 		ldgp = ldgvp->ldgp = KMEM_ZALLOC(sizeof (nxge_ldg_t) * maxldgs,
2742 			KM_SLEEP);
2743 		ldvp = ldgvp->ldvp = KMEM_ZALLOC(sizeof (nxge_ldv_t) * maxldvs,
2744 			KM_SLEEP);
2745 	} else {
2746 		ldgp = ldgvp->ldgp;
2747 		ldvp = ldgvp->ldvp;
2748 	}
2749 
2750 	ldgvp->ndma_ldvs = p_cfgp->max_tdcs + p_cfgp->max_rdcs;
2751 	ldgvp->tmres = NXGE_TIMER_RESO;
2752 
2753 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
2754 		"==> nxge_ldgv_init_n2: maxldvs %d maxldgs %d",
2755 		maxldvs, maxldgs));
2756 
2757 	/* logical start_ldg is ldv */
2758 	ptr = ldgp;
2759 	for (i = 0; i < maxldgs; i++) {
2760 		ptr->func = func;
2761 		ptr->arm = B_TRUE;
2762 		ptr->vldg_index = (uint8_t)i;
2763 		ptr->ldg_timer = NXGE_TIMER_LDG;
2764 		ptr->ldg = p_cfgp->ldg[i];
2765 		ptr->sys_intr_handler = nxge_intr;
2766 		ptr->nldvs = 0;
2767 		ptr->ldvp = NULL;
2768 		ptr->nxgep = nxgep;
2769 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2770 			"==> nxge_ldgv_init_n2: maxldvs %d maxldgs %d "
2771 			"ldg %d ldgptr $%p",
2772 			maxldvs, maxldgs, ptr->ldg, ptr));
2773 		ptr++;
2774 	}
2775 
2776 	endldg = NXGE_INT_MAX_LDG;
2777 	nldvs = 0;
2778 	ldgvp->nldvs = 0;
2779 	ldgp->ldvp = NULL;
2780 	*nrequired_p = 0;
2781 
2782 	/*
2783 	 * logical device group table is organized in the following order (same
2784 	 * as what interrupt property has). function 0: owns MAC, MIF, error,
2785 	 * rx, tx. function 1: owns MAC, rx, tx.
2786 	 */
2787 
2788 	if (own_fzc && p_cfgp->mac_ldvid) {
2789 		/* Each function should own MAC interrupt */
2790 		ldv = p_cfgp->mac_ldvid;
2791 		ldvp->ldv = (uint8_t)ldv;
2792 		ldvp->is_mac = B_TRUE;
2793 		ldvp->ldv_intr_handler = nxge_mac_intr;
2794 		ldvp->ldv_ldf_masks = 0;
2795 		ldvp->nxgep = nxgep;
2796 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2797 			"==> nxge_ldgv_init_n2(mac): maxldvs %d ldv %d "
2798 			"ldg %d ldgptr $%p ldvptr $%p",
2799 			maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
2800 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
2801 		nldvs++;
2802 	}
2803 
2804 	if (own_fzc && p_cfgp->mif_ldvid) {
2805 		ldv = p_cfgp->mif_ldvid;
2806 		ldvp->ldv = (uint8_t)ldv;
2807 		ldvp->is_mif = B_TRUE;
2808 		ldvp->ldv_intr_handler = nxge_mif_intr;
2809 		ldvp->ldv_ldf_masks = 0;
2810 		ldvp->nxgep = nxgep;
2811 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2812 			"==> nxge_ldgv_init_n2(mif): maxldvs %d ldv %d "
2813 			"ldg %d ldgptr $%p ldvptr $%p",
2814 			maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
2815 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
2816 		nldvs++;
2817 	}
2818 
2819 	ldv = NXGE_SYS_ERROR_LD;
2820 	ldvp->use_timer = B_TRUE;
2821 	if (own_sys_err && p_cfgp->ser_ldvid) {
2822 		ldv = p_cfgp->ser_ldvid;
2823 		/*
2824 		 * Unmask the system interrupt states.
2825 		 */
2826 		(void) nxge_fzc_sys_err_mask_set(nxgep, SYS_ERR_SMX_MASK |
2827 			SYS_ERR_IPP_MASK | SYS_ERR_TXC_MASK |
2828 			SYS_ERR_ZCP_MASK);
2829 	}
2830 	ldvp->ldv = (uint8_t)ldv;
2831 	ldvp->is_syserr = B_TRUE;
2832 	ldvp->ldv_intr_handler = nxge_syserr_intr;
2833 	ldvp->ldv_ldf_masks = 0;
2834 	ldvp->nxgep = nxgep;
2835 	ldgvp->ldvp_syserr = ldvp;
2836 
2837 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
2838 		"==> nxge_ldgv_init_n2(syserr): maxldvs %d ldv %d "
2839 		"ldg %d ldgptr $%p ldvptr p%p",
2840 		maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
2841 
2842 	if (own_sys_err && p_cfgp->ser_ldvid) {
2843 		(void) nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
2844 	} else {
2845 		ldvp++;
2846 	}
2847 
2848 	nldvs++;
2849 
2850 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
2851 		"(before rx) func %d nldvs %d navail %d nrequired %d",
2852 		func, nldvs, *navail_p, *nrequired_p));
2853 
2854 	/*
2855 	 * Receive DMA channels.
2856 	 */
2857 	channel = p_cfgp->start_rdc;
2858 	start = p_cfgp->start_rdc + NXGE_RDMA_LD_START;
2859 	end = start + p_cfgp->max_rdcs;
2860 	chn_start = p_cfgp->ldg_chn_start;
2861 	/*
2862 	 * Start with RDC to configure logical devices for each group.
2863 	 */
2864 	for (i = 0, ldv = start; ldv < end; i++, ldv++, chn_start++) {
2865 		ldvp->is_rxdma = B_TRUE;
2866 		ldvp->ldv = (uint8_t)ldv;
2867 		ldvp->channel = channel++;
2868 		ldvp->vdma_index = (uint8_t)i;
2869 		ldvp->ldv_intr_handler = nxge_rx_intr;
2870 		ldvp->ldv_ldf_masks = 0;
2871 		ldvp->nxgep = nxgep;
2872 		ldgp->ldg = p_cfgp->ldg[chn_start];
2873 
2874 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2875 			"==> nxge_ldgv_init_n2(rx%d): maxldvs %d ldv %d "
2876 			"ldg %d ldgptr 0x%016llx ldvptr 0x%016llx",
2877 			i, maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
2878 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
2879 		nldvs++;
2880 	}
2881 
2882 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
2883 		"func %d nldvs %d navail %d nrequired %d",
2884 		func, nldvs, *navail_p, *nrequired_p));
2885 
2886 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
2887 		"func %d nldvs %d navail %d nrequired %d ldgp 0x%llx "
2888 		"ldvp 0x%llx",
2889 		func, nldvs, *navail_p, *nrequired_p, ldgp, ldvp));
2890 	/*
2891 	 * Transmit DMA channels.
2892 	 */
2893 	channel = p_cfgp->start_tdc;
2894 	start = p_cfgp->start_tdc + NXGE_TDMA_LD_START;
2895 	end = start + p_cfgp->max_tdcs;
2896 	for (i = 0, ldv = start; ldv < end; i++, ldv++, chn_start++) {
2897 		ldvp->is_txdma = B_TRUE;
2898 		ldvp->ldv = (uint8_t)ldv;
2899 		ldvp->channel = channel++;
2900 		ldvp->vdma_index = (uint8_t)i;
2901 		ldvp->ldv_intr_handler = nxge_tx_intr;
2902 		ldvp->ldv_ldf_masks = 0;
2903 		ldgp->ldg = p_cfgp->ldg[chn_start];
2904 		ldvp->nxgep = nxgep;
2905 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
2906 			"==> nxge_ldgv_init_n2(tx%d): maxldvs %d ldv %d "
2907 			"ldg %d ldgptr 0x%016llx ldvptr 0x%016llx",
2908 			i, maxldvs, ldv, ldgp->ldg, ldgp, ldvp));
2909 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
2910 		nldvs++;
2911 	}
2912 
2913 	ldgvp->ldg_intrs = *nrequired_p;
2914 	ldgvp->nldvs = (uint8_t)nldvs;
2915 
2916 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init_n2: "
2917 		"func %d nldvs %d maxgrps %d navail %d nrequired %d",
2918 		func, nldvs, maxldgs, *navail_p, *nrequired_p));
2919 
2920 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_init_n2"));
2921 	return (status);
2922 }
2923 
2924 /*
2925  * Interrupts related interface functions.
2926  */
2927 
2928 nxge_status_t
2929 nxge_ldgv_init(p_nxge_t nxgep, int *navail_p, int *nrequired_p)
2930 {
2931 	int i, maxldvs, maxldgs, start, end, nldvs;
2932 	int ldv, ldg, endldg, ngrps;
2933 	uint8_t func;
2934 	uint8_t channel;
2935 	boolean_t own_sys_err = B_FALSE, own_fzc = B_FALSE;
2936 	p_nxge_dma_pt_cfg_t p_dma_cfgp;
2937 	p_nxge_hw_pt_cfg_t p_cfgp;
2938 	p_nxge_ldgv_t ldgvp;
2939 	p_nxge_ldg_t ldgp, ptr;
2940 	p_nxge_ldv_t ldvp;
2941 	nxge_status_t status = NXGE_OK;
2942 
2943 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init"));
2944 	if (!*navail_p) {
2945 		*nrequired_p = 0;
2946 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
2947 			"<== nxge_ldgv_init:no avail"));
2948 		return (NXGE_ERROR);
2949 	}
2950 	p_dma_cfgp = (p_nxge_dma_pt_cfg_t)&nxgep->pt_config;
2951 	p_cfgp = (p_nxge_hw_pt_cfg_t)&p_dma_cfgp->hw_config;
2952 
2953 	nldvs = p_cfgp->max_tdcs + p_cfgp->max_rdcs;
2954 
2955 	/*
2956 	 * If function zero instance, it needs to handle the system error
2957 	 * interrupts.
2958 	 */
2959 	func = nxgep->function_num;
2960 	if (func == 0) {
2961 		nldvs++;
2962 		own_sys_err = B_TRUE;
2963 	} else {
2964 		/* use timer */
2965 		nldvs++;
2966 	}
2967 
2968 	/*
2969 	 * Assume single partition, each function owns mac.
2970 	 */
2971 	if (!nxge_use_partition) {
2972 		/* mac */
2973 		nldvs++;
2974 		/* MIF */
2975 		nldvs++;
2976 		own_fzc = B_TRUE;
2977 	}
2978 	maxldvs = nldvs;
2979 	maxldgs = p_cfgp->max_ldgs;
2980 	if (!maxldvs || !maxldgs) {
2981 		/* No devices configured. */
2982 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_init: "
2983 			"no logical devices or groups configured."));
2984 		return (NXGE_ERROR);
2985 	}
2986 	ldgvp = nxgep->ldgvp;
2987 	if (ldgvp == NULL) {
2988 		ldgvp = KMEM_ZALLOC(sizeof (nxge_ldgv_t), KM_SLEEP);
2989 		nxgep->ldgvp = ldgvp;
2990 		ldgvp->maxldgs = (uint8_t)maxldgs;
2991 		ldgvp->maxldvs = (uint8_t)maxldvs;
2992 		ldgp = ldgvp->ldgp = KMEM_ZALLOC(sizeof (nxge_ldg_t) * maxldgs,
2993 			KM_SLEEP);
2994 		ldvp = ldgvp->ldvp = KMEM_ZALLOC(sizeof (nxge_ldv_t) * maxldvs,
2995 			KM_SLEEP);
2996 	}
2997 	ldgvp->ndma_ldvs = p_cfgp->max_tdcs + p_cfgp->max_rdcs;
2998 	ldgvp->tmres = NXGE_TIMER_RESO;
2999 
3000 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3001 		"==> nxge_ldgv_init: maxldvs %d maxldgs %d nldvs %d",
3002 		maxldvs, maxldgs, nldvs));
3003 	ldg = p_cfgp->start_ldg;
3004 	ptr = ldgp;
3005 	for (i = 0; i < maxldgs; i++) {
3006 		ptr->func = func;
3007 		ptr->arm = B_TRUE;
3008 		ptr->vldg_index = (uint8_t)i;
3009 		ptr->ldg_timer = NXGE_TIMER_LDG;
3010 		ptr->ldg = ldg++;
3011 		ptr->sys_intr_handler = nxge_intr;
3012 		ptr->nldvs = 0;
3013 		ptr->nxgep = nxgep;
3014 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3015 			"==> nxge_ldgv_init: maxldvs %d maxldgs %d ldg %d",
3016 			maxldvs, maxldgs, ptr->ldg));
3017 		ptr++;
3018 	}
3019 
3020 	ldg = p_cfgp->start_ldg;
3021 	if (maxldgs > *navail_p) {
3022 		ngrps = *navail_p;
3023 	} else {
3024 		ngrps = maxldgs;
3025 	}
3026 	endldg = ldg + ngrps;
3027 
3028 	/*
3029 	 * Receive DMA channels.
3030 	 */
3031 	channel = p_cfgp->start_rdc;
3032 	start = p_cfgp->start_rdc + NXGE_RDMA_LD_START;
3033 	end = start + p_cfgp->max_rdcs;
3034 	nldvs = 0;
3035 	ldgvp->nldvs = 0;
3036 	ldgp->ldvp = NULL;
3037 	*nrequired_p = 0;
3038 
3039 	/*
3040 	 * Start with RDC to configure logical devices for each group.
3041 	 */
3042 	for (i = 0, ldv = start; ldv < end; i++, ldv++) {
3043 		ldvp->is_rxdma = B_TRUE;
3044 		ldvp->ldv = (uint8_t)ldv;
3045 		/* If non-seq needs to change the following code */
3046 		ldvp->channel = channel++;
3047 		ldvp->vdma_index = (uint8_t)i;
3048 		ldvp->ldv_intr_handler = nxge_rx_intr;
3049 		ldvp->ldv_ldf_masks = 0;
3050 		ldvp->use_timer = B_FALSE;
3051 		ldvp->nxgep = nxgep;
3052 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3053 		nldvs++;
3054 	}
3055 
3056 	/*
3057 	 * Transmit DMA channels.
3058 	 */
3059 	channel = p_cfgp->start_tdc;
3060 	start = p_cfgp->start_tdc + NXGE_TDMA_LD_START;
3061 	end = start + p_cfgp->max_tdcs;
3062 	for (i = 0, ldv = start; ldv < end; i++, ldv++) {
3063 		ldvp->is_txdma = B_TRUE;
3064 		ldvp->ldv = (uint8_t)ldv;
3065 		ldvp->channel = channel++;
3066 		ldvp->vdma_index = (uint8_t)i;
3067 		ldvp->ldv_intr_handler = nxge_tx_intr;
3068 		ldvp->ldv_ldf_masks = 0;
3069 		ldvp->use_timer = B_FALSE;
3070 		ldvp->nxgep = nxgep;
3071 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3072 		nldvs++;
3073 	}
3074 
3075 	if (own_fzc) {
3076 		ldv = NXGE_MIF_LD;
3077 		ldvp->ldv = (uint8_t)ldv;
3078 		ldvp->is_mif = B_TRUE;
3079 		ldvp->ldv_intr_handler = nxge_mif_intr;
3080 		ldvp->ldv_ldf_masks = 0;
3081 		ldvp->use_timer = B_FALSE;
3082 		ldvp->nxgep = nxgep;
3083 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3084 		nldvs++;
3085 	}
3086 	/*
3087 	 * MAC port (function zero control)
3088 	 */
3089 	if (own_fzc) {
3090 		ldvp->is_mac = B_TRUE;
3091 		ldvp->ldv_intr_handler = nxge_mac_intr;
3092 		ldvp->ldv_ldf_masks = 0;
3093 		ldv = func + NXGE_MAC_LD_START;
3094 		ldvp->ldv = (uint8_t)ldv;
3095 		ldvp->use_timer = B_FALSE;
3096 		ldvp->nxgep = nxgep;
3097 		nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3098 		nldvs++;
3099 	}
3100 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init: "
3101 		"func %d nldvs %d navail %d nrequired %d",
3102 		func, nldvs, *navail_p, *nrequired_p));
3103 	/*
3104 	 * Function 0 owns system error interrupts.
3105 	 */
3106 	ldvp->use_timer = B_TRUE;
3107 	if (own_sys_err) {
3108 		ldv = NXGE_SYS_ERROR_LD;
3109 		ldvp->ldv = (uint8_t)ldv;
3110 		ldvp->is_syserr = B_TRUE;
3111 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3112 		ldvp->ldv_ldf_masks = 0;
3113 		ldvp->nxgep = nxgep;
3114 		ldgvp->ldvp_syserr = ldvp;
3115 		/*
3116 		 * Unmask the system interrupt states.
3117 		 */
3118 		(void) nxge_fzc_sys_err_mask_set(nxgep, SYS_ERR_SMX_MASK |
3119 			SYS_ERR_IPP_MASK | SYS_ERR_TXC_MASK |
3120 			SYS_ERR_ZCP_MASK);
3121 
3122 		(void) nxge_ldgv_setup(&ldgp, &ldvp, ldv, endldg, nrequired_p);
3123 		nldvs++;
3124 	} else {
3125 		ldv = NXGE_SYS_ERROR_LD;
3126 		ldvp->ldv = (uint8_t)ldv;
3127 		ldvp->is_syserr = B_TRUE;
3128 		ldvp->ldv_intr_handler = nxge_syserr_intr;
3129 		ldvp->nxgep = nxgep;
3130 		ldvp->ldv_ldf_masks = 0;
3131 		ldgvp->ldvp_syserr = ldvp;
3132 	}
3133 
3134 	ldgvp->ldg_intrs = *nrequired_p;
3135 
3136 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_init: "
3137 		"func %d nldvs %d navail %d nrequired %d",
3138 		func, nldvs, *navail_p, *nrequired_p));
3139 
3140 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_init"));
3141 	return (status);
3142 }
3143 
3144 nxge_status_t
3145 nxge_ldgv_uninit(p_nxge_t nxgep)
3146 {
3147 	p_nxge_ldgv_t ldgvp;
3148 
3149 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_ldgv_uninit"));
3150 	ldgvp = nxgep->ldgvp;
3151 	if (ldgvp == NULL) {
3152 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "<== nxge_ldgv_uninit: "
3153 				"no logical group configured."));
3154 		return (NXGE_OK);
3155 	}
3156 	if (ldgvp->ldgp) {
3157 		KMEM_FREE(ldgvp->ldgp, sizeof (nxge_ldg_t) * ldgvp->maxldgs);
3158 	}
3159 	if (ldgvp->ldvp) {
3160 		KMEM_FREE(ldgvp->ldvp, sizeof (nxge_ldv_t) * ldgvp->maxldvs);
3161 	}
3162 	KMEM_FREE(ldgvp, sizeof (nxge_ldgv_t));
3163 	nxgep->ldgvp = NULL;
3164 
3165 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_ldgv_uninit"));
3166 	return (NXGE_OK);
3167 }
3168 
3169 nxge_status_t
3170 nxge_intr_ldgv_init(p_nxge_t nxgep)
3171 {
3172 	nxge_status_t status = NXGE_OK;
3173 
3174 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_intr_ldgv_init"));
3175 	/*
3176 	 * Configure the logical device group numbers, state vectors and
3177 	 * interrupt masks for each logical device.
3178 	 */
3179 	status = nxge_fzc_intr_init(nxgep);
3180 
3181 	/*
3182 	 * Configure logical device masks and timers.
3183 	 */
3184 	status = nxge_intr_mask_mgmt(nxgep);
3185 
3186 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_intr_ldgv_init"));
3187 	return (status);
3188 }
3189 
3190 nxge_status_t
3191 nxge_intr_mask_mgmt(p_nxge_t nxgep)
3192 {
3193 	p_nxge_ldgv_t ldgvp;
3194 	p_nxge_ldg_t ldgp;
3195 	p_nxge_ldv_t ldvp;
3196 	npi_handle_t handle;
3197 	int i, j;
3198 	npi_status_t rs = NPI_SUCCESS;
3199 
3200 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "==> nxge_intr_mask_mgmt"));
3201 
3202 	if ((ldgvp = nxgep->ldgvp) == NULL) {
3203 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3204 			"<== nxge_intr_mask_mgmt: Null ldgvp"));
3205 		return (NXGE_ERROR);
3206 	}
3207 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
3208 	ldgp = ldgvp->ldgp;
3209 	ldvp = ldgvp->ldvp;
3210 	if (ldgp == NULL || ldvp == NULL) {
3211 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3212 			"<== nxge_intr_mask_mgmt: Null ldgp or ldvp"));
3213 		return (NXGE_ERROR);
3214 	}
3215 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3216 		"==> nxge_intr_mask_mgmt: # of intrs %d ", ldgvp->ldg_intrs));
3217 	/* Initialize masks. */
3218 	if (nxgep->niu_type != N2_NIU) {
3219 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3220 			"==> nxge_intr_mask_mgmt(Neptune): # intrs %d ",
3221 			ldgvp->ldg_intrs));
3222 		for (i = 0; i < ldgvp->ldg_intrs; i++, ldgp++) {
3223 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3224 				"==> nxge_intr_mask_mgmt(Neptune): # ldv %d "
3225 				"in group %d", ldgp->nldvs, ldgp->ldg));
3226 			for (j = 0; j < ldgp->nldvs; j++, ldvp++) {
3227 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3228 					"==> nxge_intr_mask_mgmt: set ldv # %d "
3229 					"for ldg %d", ldvp->ldv, ldgp->ldg));
3230 				rs = npi_intr_mask_set(handle, ldvp->ldv,
3231 					ldvp->ldv_ldf_masks);
3232 				if (rs != NPI_SUCCESS) {
3233 					NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3234 						"<== nxge_intr_mask_mgmt: "
3235 						"set mask failed "
3236 						" rs 0x%x ldv %d mask 0x%x",
3237 						rs, ldvp->ldv,
3238 						ldvp->ldv_ldf_masks));
3239 					return (NXGE_ERROR | rs);
3240 				}
3241 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3242 					"==> nxge_intr_mask_mgmt: "
3243 					"set mask OK "
3244 					" rs 0x%x ldv %d mask 0x%x",
3245 					rs, ldvp->ldv,
3246 					ldvp->ldv_ldf_masks));
3247 			}
3248 		}
3249 	}
3250 	ldgp = ldgvp->ldgp;
3251 	/* Configure timer and arm bit */
3252 	for (i = 0; i < nxgep->ldgvp->ldg_intrs; i++, ldgp++) {
3253 		rs = npi_intr_ldg_mgmt_set(handle, ldgp->ldg,
3254 			ldgp->arm, ldgp->ldg_timer);
3255 		if (rs != NPI_SUCCESS) {
3256 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3257 				"<== nxge_intr_mask_mgmt: "
3258 				"set timer failed "
3259 				" rs 0x%x dg %d timer 0x%x",
3260 				rs, ldgp->ldg, ldgp->ldg_timer));
3261 			return (NXGE_ERROR | rs);
3262 		}
3263 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3264 			"==> nxge_intr_mask_mgmt: "
3265 			"set timer OK "
3266 			" rs 0x%x ldg %d timer 0x%x",
3267 			rs, ldgp->ldg, ldgp->ldg_timer));
3268 	}
3269 
3270 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_fzc_intr_mask_mgmt"));
3271 	return (NXGE_OK);
3272 }
3273 
3274 nxge_status_t
3275 nxge_intr_mask_mgmt_set(p_nxge_t nxgep, boolean_t on)
3276 {
3277 	p_nxge_ldgv_t ldgvp;
3278 	p_nxge_ldg_t ldgp;
3279 	p_nxge_ldv_t ldvp;
3280 	npi_handle_t handle;
3281 	int i, j;
3282 	npi_status_t rs = NPI_SUCCESS;
3283 
3284 	NXGE_DEBUG_MSG((nxgep, INT_CTL,
3285 		"==> nxge_intr_mask_mgmt_set (%d)", on));
3286 
3287 	if (nxgep->niu_type == N2_NIU) {
3288 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3289 			"<== nxge_intr_mask_mgmt_set (%d) not set (N2/NIU)",
3290 			on));
3291 		return (NXGE_ERROR);
3292 	}
3293 
3294 	if ((ldgvp = nxgep->ldgvp) == NULL) {
3295 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3296 			"==> nxge_intr_mask_mgmt_set: Null ldgvp"));
3297 		return (NXGE_ERROR);
3298 	}
3299 
3300 	handle = NXGE_DEV_NPI_HANDLE(nxgep);
3301 	ldgp = ldgvp->ldgp;
3302 	ldvp = ldgvp->ldvp;
3303 	if (ldgp == NULL || ldvp == NULL) {
3304 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3305 			"<== nxge_intr_mask_mgmt_set: Null ldgp or ldvp"));
3306 		return (NXGE_ERROR);
3307 	}
3308 	/* set masks. */
3309 	for (i = 0; i < ldgvp->ldg_intrs; i++, ldgp++) {
3310 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3311 			"==> nxge_intr_mask_mgmt_set: flag %d ldg %d"
3312 			"set mask nldvs %d", on, ldgp->ldg, ldgp->nldvs));
3313 		for (j = 0; j < ldgp->nldvs; j++, ldvp++) {
3314 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3315 				"==> nxge_intr_mask_mgmt_set: "
3316 				"for %d %d flag %d", i, j, on));
3317 			if (on) {
3318 				ldvp->ldv_ldf_masks = 0;
3319 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3320 					"==> nxge_intr_mask_mgmt_set: "
3321 					"ON mask off"));
3322 			} else if (!on) {
3323 				ldvp->ldv_ldf_masks = (uint8_t)LD_IM1_MASK;
3324 				NXGE_DEBUG_MSG((nxgep, INT_CTL,
3325 					"==> nxge_intr_mask_mgmt_set:mask on"));
3326 			}
3327 			rs = npi_intr_mask_set(handle, ldvp->ldv,
3328 				ldvp->ldv_ldf_masks);
3329 			if (rs != NPI_SUCCESS) {
3330 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3331 					"==> nxge_intr_mask_mgmt_set: "
3332 					"set mask failed "
3333 					" rs 0x%x ldv %d mask 0x%x",
3334 					rs, ldvp->ldv, ldvp->ldv_ldf_masks));
3335 				return (NXGE_ERROR | rs);
3336 			}
3337 			NXGE_DEBUG_MSG((nxgep, INT_CTL,
3338 				"==> nxge_intr_mask_mgmt_set: flag %d"
3339 				"set mask OK "
3340 				" ldv %d mask 0x%x",
3341 				on, ldvp->ldv, ldvp->ldv_ldf_masks));
3342 		}
3343 	}
3344 
3345 	ldgp = ldgvp->ldgp;
3346 	/* set the arm bit */
3347 	for (i = 0; i < nxgep->ldgvp->ldg_intrs; i++, ldgp++) {
3348 		if (on && !ldgp->arm) {
3349 			ldgp->arm = B_TRUE;
3350 		} else if (!on && ldgp->arm) {
3351 			ldgp->arm = B_FALSE;
3352 		}
3353 		rs = npi_intr_ldg_mgmt_set(handle, ldgp->ldg,
3354 			ldgp->arm, ldgp->ldg_timer);
3355 		if (rs != NPI_SUCCESS) {
3356 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3357 				"<== nxge_intr_mask_mgmt_set: "
3358 				"set timer failed "
3359 				" rs 0x%x ldg %d timer 0x%x",
3360 				rs, ldgp->ldg, ldgp->ldg_timer));
3361 			return (NXGE_ERROR | rs);
3362 		}
3363 		NXGE_DEBUG_MSG((nxgep, INT_CTL,
3364 			"==> nxge_intr_mask_mgmt_set: OK (flag %d) "
3365 			"set timer "
3366 			" ldg %d timer 0x%x",
3367 			on, ldgp->ldg, ldgp->ldg_timer));
3368 	}
3369 
3370 	NXGE_DEBUG_MSG((nxgep, INT_CTL, "<== nxge_intr_mask_mgmt_set"));
3371 	return (NXGE_OK);
3372 }
3373 
3374 static nxge_status_t
3375 nxge_get_mac_addr_properties(p_nxge_t nxgep)
3376 {
3377 	uchar_t *prop_val;
3378 	uint_t prop_len;
3379 	uint_t i;
3380 	uint8_t func_num;
3381 	uint8_t total_factory_macs;
3382 
3383 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "==> nxge_get_mac_addr_properties "));
3384 
3385 #if defined(_BIG_ENDIAN)
3386 	/*
3387 	 * Get the ethernet address.
3388 	 */
3389 	(void) localetheraddr((struct ether_addr *)NULL, &nxgep->ouraddr);
3390 
3391 	/*
3392 	 * Check if it is an adapter with its own local mac address If it is
3393 	 * present, override the system mac address.
3394 	 */
3395 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3396 			"local-mac-address", &prop_val,
3397 			&prop_len) == DDI_PROP_SUCCESS) {
3398 		if (prop_len == ETHERADDRL) {
3399 			nxgep->factaddr = *(p_ether_addr_t)prop_val;
3400 			NXGE_DEBUG_MSG((nxgep, DDI_CTL, "Local mac address = "
3401 				"%02x:%02x:%02x:%02x:%02x:%02x",
3402 				prop_val[0], prop_val[1], prop_val[2],
3403 				prop_val[3], prop_val[4], prop_val[5]));
3404 		}
3405 		ddi_prop_free(prop_val);
3406 	}
3407 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3408 			"local-mac-address?", &prop_val,
3409 			&prop_len) == DDI_PROP_SUCCESS) {
3410 		if (strncmp("true", (caddr_t)prop_val, (size_t)prop_len) == 0) {
3411 			nxgep->ouraddr = nxgep->factaddr;
3412 			NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3413 				"Using local MAC address"));
3414 		}
3415 		ddi_prop_free(prop_val);
3416 	} else {
3417 		nxgep->ouraddr = nxgep->factaddr;
3418 	}
3419 
3420 	if ((nxgep->niu_type == N2_NIU) ||
3421 	    nxge_is_valid_local_mac(nxgep->factaddr))
3422 		goto got_mac_addr;
3423 
3424 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "nxge_get_mac_addr_properties: "
3425 	    "MAC address from properties is not valid...reading from PROM"));
3426 
3427 #endif
3428 	if (!nxgep->vpd_info.ver_valid) {
3429 		(void) nxge_espc_mac_addrs_get(nxgep);
3430 		if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3431 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "EEPROM version "
3432 			    "[%s] invalid...please update",
3433 			    nxgep->vpd_info.ver));
3434 			return (NXGE_ERROR);
3435 		}
3436 		nxgep->ouraddr = nxgep->factaddr;
3437 		goto got_mac_addr;
3438 	}
3439 	/*
3440 	 * First get the MAC address from the info in the VPD data read
3441 	 * from the EEPROM.
3442 	 */
3443 	nxge_espc_get_next_mac_addr(nxgep->vpd_info.mac_addr,
3444 	    nxgep->mac.portnum, &nxgep->factaddr);
3445 
3446 	if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3447 		NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3448 		    "nxge_get_mac_addr_properties: "
3449 		    "MAC address in EEPROM VPD data not valid"
3450 		    "...reading from NCR registers"));
3451 		(void) nxge_espc_mac_addrs_get(nxgep);
3452 		if (!nxge_is_valid_local_mac(nxgep->factaddr)) {
3453 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL, "EEPROM version "
3454 			    "[%s] invalid...please update",
3455 			    nxgep->vpd_info.ver));
3456 			return (NXGE_ERROR);
3457 		}
3458 	}
3459 
3460 	nxgep->ouraddr = nxgep->factaddr;
3461 
3462 got_mac_addr:
3463 	func_num = nxgep->function_num;
3464 
3465 	/*
3466 	 * total_factory_macs is the total number of MACs the factory assigned
3467 	 * to the whole Neptune device.  NIU does not need this parameter
3468 	 * because it derives the number of factory MACs for each port from
3469 	 * the device properties.
3470 	 */
3471 	if (nxgep->niu_type == NEPTUNE || nxgep->niu_type == NEPTUNE_2) {
3472 		/* First get VPD data from EEPROM */
3473 		if (nxgep->vpd_info.ver_valid && nxgep->vpd_info.num_macs) {
3474 			nxgep->nxge_mmac_info.total_factory_macs =
3475 			    nxgep->vpd_info.num_macs;
3476 		} else {
3477 			NXGE_DEBUG_MSG((nxgep, DDI_CTL,
3478 			    "nxge_get_mac_addr_properties: Number of MAC "
3479 			    "addresses in EEPROM VPD data not valid"
3480 			    "...reading from NCR registers"));
3481 			if (nxge_espc_num_macs_get(nxgep,
3482 			    &total_factory_macs) == NXGE_OK) {
3483 				nxgep->nxge_mmac_info.total_factory_macs =
3484 					total_factory_macs;
3485 			} else {
3486 				NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3487 				    "EEPROM version [%s] invalid...please "
3488 				    "update", nxgep->vpd_info.ver));
3489 				return (NXGE_ERROR);
3490 			}
3491 		}
3492 	}
3493 
3494 	/*
3495 	 * Note: mac-addresses of n2-niu is the list of mac addresses for a
3496 	 * port. #mac-addresses stored in Neptune's SEEPROM is the total number
3497 	 * of MAC addresses allocated for a board.
3498 	 */
3499 	if (nxgep->niu_type == N2_NIU) {
3500 		if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3501 				"mac-addresses", &prop_val, &prop_len) ==
3502 			DDI_PROP_SUCCESS) {
3503 			/*
3504 			 * XAUI may have up to 18 MACs, more than the XMAC can
3505 			 * use (1 unique MAC plus 16 alternate MACs)
3506 			 */
3507 			nxgep->nxge_mmac_info.num_factory_mmac
3508 			    = prop_len / ETHERADDRL - 1;
3509 			if (nxgep->nxge_mmac_info.num_factory_mmac >
3510 				XMAC_MAX_ALT_ADDR_ENTRY) {
3511 				nxgep->nxge_mmac_info.num_factory_mmac =
3512 					XMAC_MAX_ALT_ADDR_ENTRY;
3513 			}
3514 			ddi_prop_free(prop_val);
3515 		}
3516 	} else {
3517 		/*
3518 		 * total_factory_macs = 32
3519 		 * num_factory_mmac = (32 >> (nports/2)) - 1
3520 		 * So if nports = 4, then num_factory_mmac =  7
3521 		 *    if nports = 2, then num_factory_mmac = 15
3522 		 */
3523 		nxgep->nxge_mmac_info.num_factory_mmac
3524 			= ((nxgep->nxge_mmac_info.total_factory_macs >>
3525 			(nxgep->nports >> 1))) - 1;
3526 
3527 		if (nxgep->nxge_mmac_info.num_factory_mmac < 1) {
3528 			NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3529 			    "Invalid value [0x%x] for num_factory_mmac",
3530 			    nxgep->nxge_mmac_info.num_factory_mmac));
3531 			return (NXGE_ERROR);
3532 		}
3533 		if ((nxgep->function_num < 2) &&
3534 		    (nxgep->nxge_mmac_info.num_factory_mmac >
3535 		    XMAC_MAX_ALT_ADDR_ENTRY)) {
3536 			nxgep->nxge_mmac_info.num_factory_mmac =
3537 				XMAC_MAX_ALT_ADDR_ENTRY;
3538 		} else if ((nxgep->function_num > 1) &&
3539 		    (nxgep->nxge_mmac_info.num_factory_mmac >
3540 		    BMAC_MAX_ALT_ADDR_ENTRY)) {
3541 			nxgep->nxge_mmac_info.num_factory_mmac =
3542 				BMAC_MAX_ALT_ADDR_ENTRY;
3543 		}
3544 	}
3545 
3546 	if (nxgep->nxge_mmac_info.num_mmac < 1) {
3547 		NXGE_ERROR_MSG((nxgep, NXGE_ERR_CTL,
3548 		    "Invalid value [0x%x] for num_mmac",
3549 		    nxgep->nxge_mmac_info.num_mmac));
3550 		return (NXGE_ERROR);
3551 	}
3552 
3553 	for (i = 0; i <= nxgep->nxge_mmac_info.num_mmac; i++) {
3554 		(void) npi_mac_altaddr_disable(nxgep->npi_handle,
3555 			NXGE_GET_PORT_NUM(func_num), i);
3556 	}
3557 
3558 	(void) nxge_init_mmac(nxgep);
3559 	return (NXGE_OK);
3560 }
3561 
3562 void
3563 nxge_get_xcvr_properties(p_nxge_t nxgep)
3564 {
3565 	uchar_t *prop_val;
3566 	uint_t prop_len;
3567 
3568 	NXGE_DEBUG_MSG((nxgep, DDI_CTL, "==> nxge_get_xcvr_properties"));
3569 
3570 	/*
3571 	 * Read the type of physical layer interface being used.
3572 	 */
3573 	nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3574 	if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3575 			"phy-type", &prop_val, &prop_len) == DDI_PROP_SUCCESS) {
3576 		if (strncmp("pcs", (caddr_t)prop_val,
3577 				(size_t)prop_len) == 0) {
3578 			nxgep->statsp->mac_stats.xcvr_inuse = PCS_XCVR;
3579 		} else {
3580 			nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3581 		}
3582 		ddi_prop_free(prop_val);
3583 	} else if (ddi_prop_lookup_byte_array(DDI_DEV_T_ANY, nxgep->dip, 0,
3584 			"phy-interface", &prop_val,
3585 			&prop_len) == DDI_PROP_SUCCESS) {
3586 		if (strncmp("pcs", (caddr_t)prop_val, (size_t)prop_len) == 0) {
3587 			nxgep->statsp->mac_stats.xcvr_inuse = PCS_XCVR;
3588 		} else {
3589 			nxgep->statsp->mac_stats.xcvr_inuse = INT_MII_XCVR;
3590 		}
3591 		ddi_prop_free(prop_val);
3592 	}
3593 }
3594 
3595 /*
3596  * Static functions start here.
3597  */
3598 
3599 static void
3600 nxge_ldgv_setup(p_nxge_ldg_t *ldgp, p_nxge_ldv_t *ldvp, uint8_t ldv,
3601 	uint8_t endldg, int *ngrps)
3602 {
3603 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup"));
3604 	/* Assign the group number for each device. */
3605 	(*ldvp)->ldg_assigned = (*ldgp)->ldg;
3606 	(*ldvp)->ldgp = *ldgp;
3607 	(*ldvp)->ldv = ldv;
3608 
3609 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup: "
3610 		"ldv %d endldg %d ldg %d, ldvp $%p",
3611 		ldv, endldg, (*ldgp)->ldg, (*ldgp)->ldvp));
3612 
3613 	(*ldgp)->nldvs++;
3614 	if ((*ldgp)->ldg == (endldg - 1)) {
3615 		if ((*ldgp)->ldvp == NULL) {
3616 			(*ldgp)->ldvp = *ldvp;
3617 			*ngrps += 1;
3618 			NXGE_DEBUG_MSG((NULL, INT_CTL,
3619 				"==> nxge_ldgv_setup: ngrps %d", *ngrps));
3620 		}
3621 		NXGE_DEBUG_MSG((NULL, INT_CTL,
3622 			"==> nxge_ldgv_setup: ldvp $%p ngrps %d",
3623 			*ldvp, *ngrps));
3624 		++*ldvp;
3625 	} else {
3626 		(*ldgp)->ldvp = *ldvp;
3627 		*ngrps += 1;
3628 		NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup(done): "
3629 			"ldv %d endldg %d ldg %d, ldvp $%p",
3630 			ldv, endldg, (*ldgp)->ldg, (*ldgp)->ldvp));
3631 		(*ldvp) = ++*ldvp;
3632 		(*ldgp) = ++*ldgp;
3633 		NXGE_DEBUG_MSG((NULL, INT_CTL,
3634 			"==> nxge_ldgv_setup: new ngrps %d", *ngrps));
3635 	}
3636 
3637 	NXGE_DEBUG_MSG((NULL, INT_CTL, "==> nxge_ldgv_setup: "
3638 		"ldv %d ldvp $%p endldg %d ngrps %d",
3639 		ldv, ldvp, endldg, *ngrps));
3640 
3641 	NXGE_DEBUG_MSG((NULL, INT_CTL, "<== nxge_ldgv_setup"));
3642 }
3643 
3644 /*
3645  * Note: This function assumes the following distribution of mac
3646  * addresses among 4 ports in neptune:
3647  *
3648  *      -------------
3649  *    0|            |0 - local-mac-address for fn 0
3650  *      -------------
3651  *    1|            |1 - local-mac-address for fn 1
3652  *      -------------
3653  *    2|            |2 - local-mac-address for fn 2
3654  *      -------------
3655  *    3|            |3 - local-mac-address for fn 3
3656  *      -------------
3657  *     |            |4 - Start of alt. mac addr. for fn 0
3658  *     |            |
3659  *     |            |
3660  *     |            |10
3661  *     --------------
3662  *     |            |11 - Start of alt. mac addr. for fn 1
3663  *     |            |
3664  *     |            |
3665  *     |            |17
3666  *     --------------
3667  *     |            |18 - Start of alt. mac addr. for fn 2
3668  *     |            |
3669  *     |            |
3670  *     |            |24
3671  *     --------------
3672  *     |            |25 - Start of alt. mac addr. for fn 3
3673  *     |            |
3674  *     |            |
3675  *     |            |31
3676  *     --------------
3677  *
3678  * For N2/NIU the mac addresses is from XAUI card.
3679  */
3680 
3681 static void
3682 nxge_init_mmac(p_nxge_t nxgep)
3683 {
3684 	int slot;
3685 	uint8_t func_num;
3686 	uint16_t *base_mmac_addr;
3687 	uint32_t alt_mac_ls4b;
3688 	uint16_t *mmac_addr;
3689 	uint32_t base_mac_ls4b; /* least significant 4 bytes */
3690 	nxge_mmac_t *mmac_info;
3691 	npi_mac_addr_t mac_addr;
3692 
3693 	func_num = nxgep->function_num;
3694 	base_mmac_addr = (uint16_t *)&nxgep->factaddr;
3695 	mmac_info = (nxge_mmac_t *)&nxgep->nxge_mmac_info;
3696 
3697 	base_mac_ls4b = ((uint32_t)base_mmac_addr[1]) << 16 |
3698 		base_mmac_addr[2];
3699 
3700 	if (nxgep->niu_type == N2_NIU) {
3701 		alt_mac_ls4b = base_mac_ls4b + 1; /* ls4b of 1st altmac */
3702 	} else {			/* Neptune */
3703 		alt_mac_ls4b = base_mac_ls4b + (nxgep->nports - func_num)
3704 			+ (func_num * (mmac_info->num_factory_mmac));
3705 	}
3706 
3707 	/* Set flags for unique MAC */
3708 	mmac_info->mac_pool[0].flags |= MMAC_SLOT_USED | MMAC_VENDOR_ADDR;
3709 
3710 	/* Clear flags of all alternate MAC slots */
3711 	for (slot = 1; slot <= mmac_info->num_mmac; slot++) {
3712 		if (slot <= mmac_info->num_factory_mmac)
3713 			mmac_info->mac_pool[slot].flags = MMAC_VENDOR_ADDR;
3714 		else
3715 			mmac_info->mac_pool[slot].flags = 0;
3716 	}
3717 
3718 	/* Generate and store factory alternate MACs */
3719 	for (slot = 1; slot <= mmac_info->num_factory_mmac; slot++) {
3720 		mmac_addr = (uint16_t *)&mmac_info->factory_mac_pool[slot];
3721 		mmac_addr[0] = base_mmac_addr[0];
3722 		mac_addr.w2 = mmac_addr[0];
3723 
3724 		mmac_addr[1] = (alt_mac_ls4b >> 16) & 0x0FFFF;
3725 		mac_addr.w1 = mmac_addr[1];
3726 
3727 		mmac_addr[2] = alt_mac_ls4b & 0x0FFFF;
3728 		mac_addr.w0 = mmac_addr[2];
3729 		/*
3730 		 * slot minus 1 because npi_mac_alraddr_entry expects 0
3731 		 * for the first alternate mac address.
3732 		 */
3733 		(void) npi_mac_altaddr_entry(nxgep->npi_handle, OP_SET,
3734 			NXGE_GET_PORT_NUM(func_num), slot - 1, &mac_addr);
3735 
3736 		alt_mac_ls4b++;
3737 	}
3738 	/* Initialize the first two parameters for mmac kstat */
3739 	nxgep->statsp->mmac_stats.mmac_max_cnt = mmac_info->num_mmac;
3740 	nxgep->statsp->mmac_stats.mmac_avail_cnt = mmac_info->num_mmac;
3741 }
3742