1# This file and its contents are supplied under the terms of the 2# Common Development and Distribution License ("CDDL"), version 1.0. 3# You may only use this file in accordance with the terms of version 4# 1.0 of the CDDL. 5# 6# A full copy of the text of the CDDL should have accompanied this 7# source. A copy of the CDDL is also available via the Internet at 8# http://www.illumos.org/license/CDDL. 9# 10# 11# Copyright 2016 Nexenta Systems, Inc. All rights reserved. 12# Copyright 2019 Western Digital Corporation 13# 14 15# 16# The driver was tested only against devices supporting v1.0 of the 17# NVMe specification. Uncomment this to be able to use devices conforming 18# to newer specifications. 19#strict-version=0; 20 21# 22# The driver does currently not support any vendor specific extension to the 23# specification. By default it will fault the device if it receives a vendor- 24# specific command status. Uncomment this to disable this behaviour. 25#ignore-unknown-vendor-status=1; 26 27# 28# The maximum length of the admin queue can be overridden here (16-4096). 29#admin-queue-len=256; 30 31# 32# The maximum length of the individual I/O submission queues can be 33# overriden here (16-65536). 34#io-squeue-len=1024; 35 36# 37# The maximum length of the individual I/O completion queues can be 38# overriden here (16-65536). 39#io-cqueue-len=2048; 40 41# 42# The number of submission queues can be configured here. The default is 43# to match submission queues 1 for 1 with completion queues. 44# The range is 1-65535. 45#max-submission-queues=65535; 46 47# 48# The number of completion queues can be configured here. The default is 49# one per interrupt vector. Should there be fewer completion queues than 50# vectors, the number of vectors is reduced. The number of completion 51# queues will also be limited to the number of submission queues. 52# The range is 1-65535. 53#max-completion-queues=65535; 54 55# 56# The maximum number of outstanding asynchronous event requests can 57# overridden here. 58#async-event-limit=10; 59 60# 61# Enable (1) or Disable (0) the volatile write cache, if present. 62# 63#volatile-write-cache-enable=1; 64 65# 66# The minimum physical block size to be reported to blkdev. This value must 67# be a power of 2 greater than or equal to 512. 68# 69#min-phys-block-size=512; 70