xref: /illumos-gate/usr/src/uts/common/io/ixgbe/core/ixgbe_82598.c (revision 9b6224883056ca9db111541974efeb6a4de0c074)
1 /******************************************************************************
2   SPDX-License-Identifier: BSD-3-Clause
3 
4   Copyright (c) 2001-2017, Intel Corporation
5   All rights reserved.
6 
7   Redistribution and use in source and binary forms, with or without
8   modification, are permitted provided that the following conditions are met:
9 
10    1. Redistributions of source code must retain the above copyright notice,
11       this list of conditions and the following disclaimer.
12 
13    2. Redistributions in binary form must reproduce the above copyright
14       notice, this list of conditions and the following disclaimer in the
15       documentation and/or other materials provided with the distribution.
16 
17    3. Neither the name of the Intel Corporation nor the names of its
18       contributors may be used to endorse or promote products derived from
19       this software without specific prior written permission.
20 
21   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
22   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24   ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
25   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31   POSSIBILITY OF SUCH DAMAGE.
32 
33 ******************************************************************************/
34 /*$FreeBSD$*/
35 
36 #include "ixgbe_type.h"
37 #include "ixgbe_82598.h"
38 #include "ixgbe_api.h"
39 #include "ixgbe_common.h"
40 #include "ixgbe_phy.h"
41 
42 #define IXGBE_82598_MAX_TX_QUEUES 32
43 #define IXGBE_82598_MAX_RX_QUEUES 64
44 #define IXGBE_82598_RAR_ENTRIES   16
45 #define IXGBE_82598_MC_TBL_SIZE  128
46 #define IXGBE_82598_VFT_TBL_SIZE 128
47 #define IXGBE_82598_RX_PB_SIZE   512
48 
49 static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
50 					     ixgbe_link_speed *speed,
51 					     bool *autoneg);
52 static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw);
53 static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
54 				      bool autoneg_wait_to_complete);
55 static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
56 				      ixgbe_link_speed *speed, bool *link_up,
57 				      bool link_up_wait_to_complete);
58 static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
59 				      ixgbe_link_speed speed,
60 				      bool autoneg_wait_to_complete);
61 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
62 					 ixgbe_link_speed speed,
63 					 bool autoneg_wait_to_complete);
64 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw);
65 static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
66 static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw);
67 static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
68 				  u32 headroom, int strategy);
69 static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
70 					u8 *sff8472_data);
71 /**
72  *  ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
73  *  @hw: pointer to the HW structure
74  *
75  *  The defaults for 82598 should be in the range of 50us to 50ms,
76  *  however the hardware default for these parts is 500us to 1ms which is less
77  *  than the 10ms recommended by the pci-e spec.  To address this we need to
78  *  increase the value to either 10ms to 250ms for capability version 1 config,
79  *  or 16ms to 55ms for version 2.
80  **/
ixgbe_set_pcie_completion_timeout(struct ixgbe_hw * hw)81 void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
82 {
83 	u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
84 	u16 pcie_devctl2;
85 
86 	/* only take action if timeout value is defaulted to 0 */
87 	if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
88 		goto out;
89 
90 	/*
91 	 * if capababilities version is type 1 we can write the
92 	 * timeout of 10ms to 250ms through the GCR register
93 	 */
94 	if (!(gcr & IXGBE_GCR_CAP_VER2)) {
95 		gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
96 		goto out;
97 	}
98 
99 	/*
100 	 * for version 2 capabilities we need to write the config space
101 	 * directly in order to set the completion timeout value for
102 	 * 16ms to 55ms
103 	 */
104 	pcie_devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2);
105 	pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
106 	IXGBE_WRITE_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
107 out:
108 	/* disable completion timeout resend */
109 	gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
110 	IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
111 }
112 
113 /**
114  *  ixgbe_init_ops_82598 - Inits func ptrs and MAC type
115  *  @hw: pointer to hardware structure
116  *
117  *  Initialize the function pointers and assign the MAC type for 82598.
118  *  Does not touch the hardware.
119  **/
ixgbe_init_ops_82598(struct ixgbe_hw * hw)120 s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw)
121 {
122 	struct ixgbe_mac_info *mac = &hw->mac;
123 	struct ixgbe_phy_info *phy = &hw->phy;
124 	s32 ret_val;
125 
126 	DEBUGFUNC("ixgbe_init_ops_82598");
127 
128 	ret_val = ixgbe_init_phy_ops_generic(hw);
129 	ret_val = ixgbe_init_ops_generic(hw);
130 
131 	/* PHY */
132 	phy->ops.init = ixgbe_init_phy_ops_82598;
133 
134 	/* MAC */
135 	mac->ops.start_hw = ixgbe_start_hw_82598;
136 	mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_82598;
137 	mac->ops.reset_hw = ixgbe_reset_hw_82598;
138 	mac->ops.get_media_type = ixgbe_get_media_type_82598;
139 	mac->ops.get_supported_physical_layer =
140 				ixgbe_get_supported_physical_layer_82598;
141 	mac->ops.read_analog_reg8 = ixgbe_read_analog_reg8_82598;
142 	mac->ops.write_analog_reg8 = ixgbe_write_analog_reg8_82598;
143 	mac->ops.set_lan_id = ixgbe_set_lan_id_multi_port_pcie_82598;
144 	mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_82598;
145 
146 	/* RAR, Multicast, VLAN */
147 	mac->ops.set_vmdq = ixgbe_set_vmdq_82598;
148 	mac->ops.clear_vmdq = ixgbe_clear_vmdq_82598;
149 	mac->ops.set_vfta = ixgbe_set_vfta_82598;
150 	mac->ops.set_vlvf = NULL;
151 	mac->ops.clear_vfta = ixgbe_clear_vfta_82598;
152 
153 	/* Flow Control */
154 	mac->ops.fc_enable = ixgbe_fc_enable_82598;
155 
156 	mac->mcft_size		= IXGBE_82598_MC_TBL_SIZE;
157 	mac->vft_size		= IXGBE_82598_VFT_TBL_SIZE;
158 	mac->num_rar_entries	= IXGBE_82598_RAR_ENTRIES;
159 	mac->rx_pb_size		= IXGBE_82598_RX_PB_SIZE;
160 	mac->max_rx_queues	= IXGBE_82598_MAX_RX_QUEUES;
161 	mac->max_tx_queues	= IXGBE_82598_MAX_TX_QUEUES;
162 	mac->max_msix_vectors	= ixgbe_get_pcie_msix_count_generic(hw);
163 
164 	/* SFP+ Module */
165 	phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_82598;
166 	phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_82598;
167 
168 	/* Link */
169 	mac->ops.check_link = ixgbe_check_mac_link_82598;
170 	mac->ops.setup_link = ixgbe_setup_mac_link_82598;
171 	mac->ops.flap_tx_laser = NULL;
172 	mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_82598;
173 	mac->ops.setup_rxpba = ixgbe_set_rxpba_82598;
174 
175 	/* Manageability interface */
176 	mac->ops.set_fw_drv_ver = NULL;
177 
178 	mac->ops.get_rtrup2tc = NULL;
179 
180 	return ret_val;
181 }
182 
183 /**
184  *  ixgbe_init_phy_ops_82598 - PHY/SFP specific init
185  *  @hw: pointer to hardware structure
186  *
187  *  Initialize any function pointers that were not able to be
188  *  set during init_shared_code because the PHY/SFP type was
189  *  not known.  Perform the SFP init if necessary.
190  *
191  **/
ixgbe_init_phy_ops_82598(struct ixgbe_hw * hw)192 s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
193 {
194 	struct ixgbe_mac_info *mac = &hw->mac;
195 	struct ixgbe_phy_info *phy = &hw->phy;
196 	s32 ret_val = IXGBE_SUCCESS;
197 	u16 list_offset, data_offset;
198 
199 	DEBUGFUNC("ixgbe_init_phy_ops_82598");
200 
201 	/* Identify the PHY */
202 	phy->ops.identify(hw);
203 
204 	/* Overwrite the link function pointers if copper PHY */
205 	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
206 		mac->ops.setup_link = ixgbe_setup_copper_link_82598;
207 		mac->ops.get_link_capabilities =
208 				ixgbe_get_copper_link_capabilities_generic;
209 	}
210 
211 	switch (hw->phy.type) {
212 	case ixgbe_phy_tn:
213 		phy->ops.setup_link = ixgbe_setup_phy_link_tnx;
214 		phy->ops.check_link = ixgbe_check_phy_link_tnx;
215 		phy->ops.get_firmware_version =
216 					ixgbe_get_phy_firmware_version_tnx;
217 		break;
218 	case ixgbe_phy_nl:
219 		phy->ops.reset = ixgbe_reset_phy_nl;
220 
221 		/* Call SFP+ identify routine to get the SFP+ module type */
222 		ret_val = phy->ops.identify_sfp(hw);
223 		if (ret_val != IXGBE_SUCCESS)
224 			goto out;
225 		else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) {
226 			ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
227 			goto out;
228 		}
229 
230 		/* Check to see if SFP+ module is supported */
231 		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
232 							      &list_offset,
233 							      &data_offset);
234 		if (ret_val != IXGBE_SUCCESS) {
235 			ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
236 			goto out;
237 		}
238 		break;
239 	default:
240 		break;
241 	}
242 
243 out:
244 	return ret_val;
245 }
246 
247 /**
248  *  ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
249  *  @hw: pointer to hardware structure
250  *
251  *  Starts the hardware using the generic start_hw function.
252  *  Disables relaxed ordering Then set pcie completion timeout
253  *
254  **/
ixgbe_start_hw_82598(struct ixgbe_hw * hw)255 s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
256 {
257 	u32 regval;
258 	u32 i;
259 	s32 ret_val = IXGBE_SUCCESS;
260 
261 	DEBUGFUNC("ixgbe_start_hw_82598");
262 
263 	ret_val = ixgbe_start_hw_generic(hw);
264 	if (ret_val)
265 		return ret_val;
266 
267 	/* Disable relaxed ordering */
268 	for (i = 0; ((i < hw->mac.max_tx_queues) &&
269 	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
270 		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
271 		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
272 		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
273 	}
274 
275 	for (i = 0; ((i < hw->mac.max_rx_queues) &&
276 	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
277 		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
278 		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
279 			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
280 		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
281 	}
282 
283 	/* set the completion timeout for interface */
284 	ixgbe_set_pcie_completion_timeout(hw);
285 
286 	return ret_val;
287 }
288 
289 /**
290  *  ixgbe_get_link_capabilities_82598 - Determines link capabilities
291  *  @hw: pointer to hardware structure
292  *  @speed: pointer to link speed
293  *  @autoneg: boolean auto-negotiation value
294  *
295  *  Determines the link capabilities by reading the AUTOC register.
296  **/
ixgbe_get_link_capabilities_82598(struct ixgbe_hw * hw,ixgbe_link_speed * speed,bool * autoneg)297 static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
298 					     ixgbe_link_speed *speed,
299 					     bool *autoneg)
300 {
301 	s32 status = IXGBE_SUCCESS;
302 	u32 autoc = 0;
303 
304 	DEBUGFUNC("ixgbe_get_link_capabilities_82598");
305 
306 	/*
307 	 * Determine link capabilities based on the stored value of AUTOC,
308 	 * which represents EEPROM defaults.  If AUTOC value has not been
309 	 * stored, use the current register value.
310 	 */
311 	if (hw->mac.orig_link_settings_stored)
312 		autoc = hw->mac.orig_autoc;
313 	else
314 		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
315 
316 	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
317 	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
318 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
319 		*autoneg = FALSE;
320 		break;
321 
322 	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
323 		*speed = IXGBE_LINK_SPEED_10GB_FULL;
324 		*autoneg = FALSE;
325 		break;
326 
327 	case IXGBE_AUTOC_LMS_1G_AN:
328 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
329 		*autoneg = TRUE;
330 		break;
331 
332 	case IXGBE_AUTOC_LMS_KX4_AN:
333 	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
334 		*speed = IXGBE_LINK_SPEED_UNKNOWN;
335 		if (autoc & IXGBE_AUTOC_KX4_SUPP)
336 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
337 		if (autoc & IXGBE_AUTOC_KX_SUPP)
338 			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
339 		*autoneg = TRUE;
340 		break;
341 
342 	default:
343 		status = IXGBE_ERR_LINK_SETUP;
344 		break;
345 	}
346 
347 	return status;
348 }
349 
350 /**
351  *  ixgbe_get_media_type_82598 - Determines media type
352  *  @hw: pointer to hardware structure
353  *
354  *  Returns the media type (fiber, copper, backplane)
355  **/
ixgbe_get_media_type_82598(struct ixgbe_hw * hw)356 static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
357 {
358 	enum ixgbe_media_type media_type;
359 
360 	DEBUGFUNC("ixgbe_get_media_type_82598");
361 
362 	/* Detect if there is a copper PHY attached. */
363 	switch (hw->phy.type) {
364 	case ixgbe_phy_cu_unknown:
365 	case ixgbe_phy_tn:
366 		media_type = ixgbe_media_type_copper;
367 		goto out;
368 	default:
369 		break;
370 	}
371 
372 	/* Media type for I82598 is based on device ID */
373 	switch (hw->device_id) {
374 	case IXGBE_DEV_ID_82598:
375 	case IXGBE_DEV_ID_82598_BX:
376 		/* Default device ID is mezzanine card KX/KX4 */
377 		media_type = ixgbe_media_type_backplane;
378 		break;
379 	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
380 	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
381 	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
382 	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
383 	case IXGBE_DEV_ID_82598EB_XF_LR:
384 	case IXGBE_DEV_ID_82598EB_SFP_LOM:
385 		media_type = ixgbe_media_type_fiber;
386 		break;
387 	case IXGBE_DEV_ID_82598EB_CX4:
388 	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
389 		media_type = ixgbe_media_type_cx4;
390 		break;
391 	case IXGBE_DEV_ID_82598AT:
392 	case IXGBE_DEV_ID_82598AT2:
393 		media_type = ixgbe_media_type_copper;
394 		break;
395 	default:
396 		media_type = ixgbe_media_type_unknown;
397 		break;
398 	}
399 out:
400 	return media_type;
401 }
402 
403 /**
404  *  ixgbe_fc_enable_82598 - Enable flow control
405  *  @hw: pointer to hardware structure
406  *
407  *  Enable flow control according to the current settings.
408  **/
ixgbe_fc_enable_82598(struct ixgbe_hw * hw)409 s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
410 {
411 	s32 ret_val = IXGBE_SUCCESS;
412 	u32 fctrl_reg;
413 	u32 rmcs_reg;
414 	u32 reg;
415 	u32 fcrtl, fcrth;
416 	u32 link_speed = 0;
417 	int i;
418 	bool link_up;
419 
420 	DEBUGFUNC("ixgbe_fc_enable_82598");
421 
422 	/* Validate the water mark configuration */
423 	if (!hw->fc.pause_time) {
424 		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
425 		goto out;
426 	}
427 
428 	/* Low water mark of zero causes XOFF floods */
429 	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
430 		if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
431 		    hw->fc.high_water[i]) {
432 			if (!hw->fc.low_water[i] ||
433 			    hw->fc.low_water[i] >= hw->fc.high_water[i]) {
434 				DEBUGOUT("Invalid water mark configuration\n");
435 				ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
436 				goto out;
437 			}
438 		}
439 	}
440 
441 	/*
442 	 * On 82598 having Rx FC on causes resets while doing 1G
443 	 * so if it's on turn it off once we know link_speed. For
444 	 * more details see 82598 Specification update.
445 	 */
446 	hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE);
447 	if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
448 		switch (hw->fc.requested_mode) {
449 		case ixgbe_fc_full:
450 			hw->fc.requested_mode = ixgbe_fc_tx_pause;
451 			break;
452 		case ixgbe_fc_rx_pause:
453 			hw->fc.requested_mode = ixgbe_fc_none;
454 			break;
455 		default:
456 			/* no change */
457 			break;
458 		}
459 	}
460 
461 	/* Negotiate the fc mode to use */
462 	ixgbe_fc_autoneg(hw);
463 
464 	/* Disable any previous flow control settings */
465 	fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
466 	fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
467 
468 	rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
469 	rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
470 
471 	/*
472 	 * The possible values of fc.current_mode are:
473 	 * 0: Flow control is completely disabled
474 	 * 1: Rx flow control is enabled (we can receive pause frames,
475 	 *    but not send pause frames).
476 	 * 2: Tx flow control is enabled (we can send pause frames but
477 	 *     we do not support receiving pause frames).
478 	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
479 	 * other: Invalid.
480 	 */
481 	switch (hw->fc.current_mode) {
482 	case ixgbe_fc_none:
483 		/*
484 		 * Flow control is disabled by software override or autoneg.
485 		 * The code below will actually disable it in the HW.
486 		 */
487 		break;
488 	case ixgbe_fc_rx_pause:
489 		/*
490 		 * Rx Flow control is enabled and Tx Flow control is
491 		 * disabled by software override. Since there really
492 		 * isn't a way to advertise that we are capable of RX
493 		 * Pause ONLY, we will advertise that we support both
494 		 * symmetric and asymmetric Rx PAUSE.  Later, we will
495 		 * disable the adapter's ability to send PAUSE frames.
496 		 */
497 		fctrl_reg |= IXGBE_FCTRL_RFCE;
498 		break;
499 	case ixgbe_fc_tx_pause:
500 		/*
501 		 * Tx Flow control is enabled, and Rx Flow control is
502 		 * disabled by software override.
503 		 */
504 		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
505 		break;
506 	case ixgbe_fc_full:
507 		/* Flow control (both Rx and Tx) is enabled by SW override. */
508 		fctrl_reg |= IXGBE_FCTRL_RFCE;
509 		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
510 		break;
511 	default:
512 		DEBUGOUT("Flow control param set incorrectly\n");
513 		ret_val = IXGBE_ERR_CONFIG;
514 		goto out;
515 		break;
516 	}
517 
518 	/* Set 802.3x based flow control settings. */
519 	fctrl_reg |= IXGBE_FCTRL_DPF;
520 	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
521 	IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
522 
523 	/* Set up and enable Rx high/low water mark thresholds, enable XON. */
524 	for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
525 		if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
526 		    hw->fc.high_water[i]) {
527 			fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
528 			fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
529 			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
530 			IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth);
531 		} else {
532 			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
533 			IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
534 		}
535 
536 	}
537 
538 	/* Configure pause time (2 TCs per register) */
539 	reg = hw->fc.pause_time * 0x00010001;
540 	for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++)
541 		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
542 
543 	/* Configure flow control refresh threshold value */
544 	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
545 
546 out:
547 	return ret_val;
548 }
549 
550 /**
551  *  ixgbe_start_mac_link_82598 - Configures MAC link settings
552  *  @hw: pointer to hardware structure
553  *  @autoneg_wait_to_complete: TRUE when waiting for completion is needed
554  *
555  *  Configures link settings based on values in the ixgbe_hw struct.
556  *  Restarts the link.  Performs autonegotiation if needed.
557  **/
ixgbe_start_mac_link_82598(struct ixgbe_hw * hw,bool autoneg_wait_to_complete)558 static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
559 				      bool autoneg_wait_to_complete)
560 {
561 	u32 autoc_reg;
562 	u32 links_reg;
563 	u32 i;
564 	s32 status = IXGBE_SUCCESS;
565 
566 	DEBUGFUNC("ixgbe_start_mac_link_82598");
567 
568 	/* Restart link */
569 	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
570 	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
571 	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
572 
573 	/* Only poll for autoneg to complete if specified to do so */
574 	if (autoneg_wait_to_complete) {
575 		if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
576 		     IXGBE_AUTOC_LMS_KX4_AN ||
577 		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
578 		     IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
579 			links_reg = 0; /* Just in case Autoneg time = 0 */
580 			for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
581 				links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
582 				if (links_reg & IXGBE_LINKS_KX_AN_COMP)
583 					break;
584 				msec_delay(100);
585 			}
586 			if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
587 				status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
588 				DEBUGOUT("Autonegotiation did not complete.\n");
589 			}
590 		}
591 	}
592 
593 	/* Add delay to filter out noises during initial link setup */
594 	msec_delay(50);
595 
596 	return status;
597 }
598 
599 /**
600  *  ixgbe_validate_link_ready - Function looks for phy link
601  *  @hw: pointer to hardware structure
602  *
603  *  Function indicates success when phy link is available. If phy is not ready
604  *  within 5 seconds of MAC indicating link, the function returns error.
605  **/
ixgbe_validate_link_ready(struct ixgbe_hw * hw)606 static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
607 {
608 	u32 timeout;
609 	u16 an_reg;
610 
611 	if (hw->device_id != IXGBE_DEV_ID_82598AT2)
612 		return IXGBE_SUCCESS;
613 
614 	for (timeout = 0;
615 	     timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) {
616 		hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
617 				     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &an_reg);
618 
619 		if ((an_reg & IXGBE_MII_AUTONEG_COMPLETE) &&
620 		    (an_reg & IXGBE_MII_AUTONEG_LINK_UP))
621 			break;
622 
623 		msec_delay(100);
624 	}
625 
626 	if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) {
627 		DEBUGOUT("Link was indicated but link is down\n");
628 		return IXGBE_ERR_LINK_SETUP;
629 	}
630 
631 	return IXGBE_SUCCESS;
632 }
633 
634 /**
635  *  ixgbe_check_mac_link_82598 - Get link/speed status
636  *  @hw: pointer to hardware structure
637  *  @speed: pointer to link speed
638  *  @link_up: TRUE is link is up, FALSE otherwise
639  *  @link_up_wait_to_complete: bool used to wait for link up or not
640  *
641  *  Reads the links register to determine if link is up and the current speed
642  **/
ixgbe_check_mac_link_82598(struct ixgbe_hw * hw,ixgbe_link_speed * speed,bool * link_up,bool link_up_wait_to_complete)643 static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
644 				      ixgbe_link_speed *speed, bool *link_up,
645 				      bool link_up_wait_to_complete)
646 {
647 	u32 links_reg;
648 	u32 i;
649 	u16 link_reg, adapt_comp_reg;
650 
651 	DEBUGFUNC("ixgbe_check_mac_link_82598");
652 
653 	/*
654 	 * SERDES PHY requires us to read link status from undocumented
655 	 * register 0xC79F.  Bit 0 set indicates link is up/ready; clear
656 	 * indicates link down.  OxC00C is read to check that the XAUI lanes
657 	 * are active.  Bit 0 clear indicates active; set indicates inactive.
658 	 */
659 	if (hw->phy.type == ixgbe_phy_nl) {
660 		hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
661 		hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
662 		hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV,
663 				     &adapt_comp_reg);
664 		if (link_up_wait_to_complete) {
665 			for (i = 0; i < hw->mac.max_link_up_time; i++) {
666 				if ((link_reg & 1) &&
667 				    ((adapt_comp_reg & 1) == 0)) {
668 					*link_up = TRUE;
669 					break;
670 				} else {
671 					*link_up = FALSE;
672 				}
673 				msec_delay(100);
674 				hw->phy.ops.read_reg(hw, 0xC79F,
675 						     IXGBE_TWINAX_DEV,
676 						     &link_reg);
677 				hw->phy.ops.read_reg(hw, 0xC00C,
678 						     IXGBE_TWINAX_DEV,
679 						     &adapt_comp_reg);
680 			}
681 		} else {
682 			if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0))
683 				*link_up = TRUE;
684 			else
685 				*link_up = FALSE;
686 		}
687 
688 		if (*link_up == FALSE)
689 			goto out;
690 	}
691 
692 	links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
693 	if (link_up_wait_to_complete) {
694 		for (i = 0; i < hw->mac.max_link_up_time; i++) {
695 			if (links_reg & IXGBE_LINKS_UP) {
696 				*link_up = TRUE;
697 				break;
698 			} else {
699 				*link_up = FALSE;
700 			}
701 			msec_delay(100);
702 			links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
703 		}
704 	} else {
705 		if (links_reg & IXGBE_LINKS_UP)
706 			*link_up = TRUE;
707 		else
708 			*link_up = FALSE;
709 	}
710 
711 	if (links_reg & IXGBE_LINKS_SPEED)
712 		*speed = IXGBE_LINK_SPEED_10GB_FULL;
713 	else
714 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
715 
716 	if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == TRUE) &&
717 	    (ixgbe_validate_link_ready(hw) != IXGBE_SUCCESS))
718 		*link_up = FALSE;
719 
720 out:
721 	return IXGBE_SUCCESS;
722 }
723 
724 /**
725  *  ixgbe_setup_mac_link_82598 - Set MAC link speed
726  *  @hw: pointer to hardware structure
727  *  @speed: new link speed
728  *  @autoneg_wait_to_complete: TRUE when waiting for completion is needed
729  *
730  *  Set the link speed in the AUTOC register and restarts link.
731  **/
ixgbe_setup_mac_link_82598(struct ixgbe_hw * hw,ixgbe_link_speed speed,bool autoneg_wait_to_complete)732 static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
733 				      ixgbe_link_speed speed,
734 				      bool autoneg_wait_to_complete)
735 {
736 	bool autoneg = FALSE;
737 	s32 status = IXGBE_SUCCESS;
738 	ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
739 	u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
740 	u32 autoc = curr_autoc;
741 	u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
742 
743 	DEBUGFUNC("ixgbe_setup_mac_link_82598");
744 
745 	/* Check to see if speed passed in is supported. */
746 	ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg);
747 	speed &= link_capabilities;
748 
749 	if (speed == IXGBE_LINK_SPEED_UNKNOWN)
750 		status = IXGBE_ERR_LINK_SETUP;
751 
752 	/* Set KX4/KX support according to speed requested */
753 	else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
754 		 link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
755 		autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK;
756 		if (speed & IXGBE_LINK_SPEED_10GB_FULL)
757 			autoc |= IXGBE_AUTOC_KX4_SUPP;
758 		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
759 			autoc |= IXGBE_AUTOC_KX_SUPP;
760 		if (autoc != curr_autoc)
761 			IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
762 	}
763 
764 	if (status == IXGBE_SUCCESS) {
765 		/*
766 		 * Setup and restart the link based on the new values in
767 		 * ixgbe_hw This will write the AUTOC register based on the new
768 		 * stored values
769 		 */
770 		status = ixgbe_start_mac_link_82598(hw,
771 						    autoneg_wait_to_complete);
772 	}
773 
774 	return status;
775 }
776 
777 
778 /**
779  *  ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
780  *  @hw: pointer to hardware structure
781  *  @speed: new link speed
782  *  @autoneg_wait_to_complete: TRUE if waiting is needed to complete
783  *
784  *  Sets the link speed in the AUTOC register in the MAC and restarts link.
785  **/
ixgbe_setup_copper_link_82598(struct ixgbe_hw * hw,ixgbe_link_speed speed,bool autoneg_wait_to_complete)786 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
787 					 ixgbe_link_speed speed,
788 					 bool autoneg_wait_to_complete)
789 {
790 	s32 status;
791 
792 	DEBUGFUNC("ixgbe_setup_copper_link_82598");
793 
794 	/* Setup the PHY according to input speed */
795 	status = hw->phy.ops.setup_link_speed(hw, speed,
796 					      autoneg_wait_to_complete);
797 	/* Set up MAC */
798 	ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
799 
800 	return status;
801 }
802 
803 /**
804  *  ixgbe_reset_hw_82598 - Performs hardware reset
805  *  @hw: pointer to hardware structure
806  *
807  *  Resets the hardware by resetting the transmit and receive units, masks and
808  *  clears all interrupts, performing a PHY reset, and performing a link (MAC)
809  *  reset.
810  **/
ixgbe_reset_hw_82598(struct ixgbe_hw * hw)811 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
812 {
813 	s32 status = IXGBE_SUCCESS;
814 	s32 phy_status = IXGBE_SUCCESS;
815 	u32 ctrl;
816 	u32 gheccr;
817 	u32 i;
818 	u32 autoc;
819 	u8  analog_val;
820 
821 	DEBUGFUNC("ixgbe_reset_hw_82598");
822 
823 	/* Call adapter stop to disable tx/rx and clear interrupts */
824 	status = hw->mac.ops.stop_adapter(hw);
825 	if (status != IXGBE_SUCCESS)
826 		goto reset_hw_out;
827 
828 	/*
829 	 * Power up the Atlas Tx lanes if they are currently powered down.
830 	 * Atlas Tx lanes are powered down for MAC loopback tests, but
831 	 * they are not automatically restored on reset.
832 	 */
833 	hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
834 	if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
835 		/* Enable Tx Atlas so packets can be transmitted again */
836 		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
837 					     &analog_val);
838 		analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
839 		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
840 					      analog_val);
841 
842 		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
843 					     &analog_val);
844 		analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
845 		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
846 					      analog_val);
847 
848 		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
849 					     &analog_val);
850 		analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
851 		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
852 					      analog_val);
853 
854 		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
855 					     &analog_val);
856 		analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
857 		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
858 					      analog_val);
859 	}
860 
861 	/* Reset PHY */
862 	if (hw->phy.reset_disable == FALSE) {
863 		/* PHY ops must be identified and initialized prior to reset */
864 
865 		/* Init PHY and function pointers, perform SFP setup */
866 		phy_status = hw->phy.ops.init(hw);
867 		if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
868 			goto reset_hw_out;
869 		if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
870 			goto mac_reset_top;
871 
872 		hw->phy.ops.reset(hw);
873 	}
874 
875 mac_reset_top:
876 	/*
877 	 * Issue global reset to the MAC.  This needs to be a SW reset.
878 	 * If link reset is used, it might reset the MAC when mng is using it
879 	 */
880 	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST;
881 	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
882 	IXGBE_WRITE_FLUSH(hw);
883 
884 	/* Poll for reset bit to self-clear indicating reset is complete */
885 	for (i = 0; i < 10; i++) {
886 		usec_delay(1);
887 		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
888 		if (!(ctrl & IXGBE_CTRL_RST))
889 			break;
890 	}
891 	if (ctrl & IXGBE_CTRL_RST) {
892 		status = IXGBE_ERR_RESET_FAILED;
893 		DEBUGOUT("Reset polling failed to complete.\n");
894 	}
895 
896 	msec_delay(50);
897 
898 	/*
899 	 * Double resets are required for recovery from certain error
900 	 * conditions.  Between resets, it is necessary to stall to allow time
901 	 * for any pending HW events to complete.
902 	 */
903 	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
904 		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
905 		goto mac_reset_top;
906 	}
907 
908 	gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
909 	gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
910 	IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
911 
912 	/*
913 	 * Store the original AUTOC value if it has not been
914 	 * stored off yet.  Otherwise restore the stored original
915 	 * AUTOC value since the reset operation sets back to defaults.
916 	 */
917 	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
918 	if (hw->mac.orig_link_settings_stored == FALSE) {
919 		hw->mac.orig_autoc = autoc;
920 		hw->mac.orig_link_settings_stored = TRUE;
921 	} else if (autoc != hw->mac.orig_autoc) {
922 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
923 	}
924 
925 	/* Store the permanent mac address */
926 	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
927 
928 	/*
929 	 * Store MAC address from RAR0, clear receive address registers, and
930 	 * clear the multicast table
931 	 */
932 	hw->mac.ops.init_rx_addrs(hw);
933 
934 reset_hw_out:
935 	if (phy_status != IXGBE_SUCCESS)
936 		status = phy_status;
937 
938 	return status;
939 }
940 
941 /**
942  *  ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
943  *  @hw: pointer to hardware struct
944  *  @rar: receive address register index to associate with a VMDq index
945  *  @vmdq: VMDq set index
946  **/
ixgbe_set_vmdq_82598(struct ixgbe_hw * hw,u32 rar,u32 vmdq)947 s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
948 {
949 	u32 rar_high;
950 	u32 rar_entries = hw->mac.num_rar_entries;
951 
952 	DEBUGFUNC("ixgbe_set_vmdq_82598");
953 
954 	/* Make sure we are using a valid rar index range */
955 	if (rar >= rar_entries) {
956 		DEBUGOUT1("RAR index %d is out of range.\n", rar);
957 		return IXGBE_ERR_INVALID_ARGUMENT;
958 	}
959 
960 	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
961 	rar_high &= ~IXGBE_RAH_VIND_MASK;
962 	rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
963 	IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
964 	return IXGBE_SUCCESS;
965 }
966 
967 /**
968  *  ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
969  *  @hw: pointer to hardware struct
970  *  @rar: receive address register index to associate with a VMDq index
971  *  @vmdq: VMDq clear index (not used in 82598, but elsewhere)
972  **/
ixgbe_clear_vmdq_82598(struct ixgbe_hw * hw,u32 rar,u32 vmdq)973 static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
974 {
975 	u32 rar_high;
976 	u32 rar_entries = hw->mac.num_rar_entries;
977 
978 	UNREFERENCED_1PARAMETER(vmdq);
979 
980 	/* Make sure we are using a valid rar index range */
981 	if (rar >= rar_entries) {
982 		DEBUGOUT1("RAR index %d is out of range.\n", rar);
983 		return IXGBE_ERR_INVALID_ARGUMENT;
984 	}
985 
986 	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
987 	if (rar_high & IXGBE_RAH_VIND_MASK) {
988 		rar_high &= ~IXGBE_RAH_VIND_MASK;
989 		IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
990 	}
991 
992 	return IXGBE_SUCCESS;
993 }
994 
995 /**
996  *  ixgbe_set_vfta_82598 - Set VLAN filter table
997  *  @hw: pointer to hardware structure
998  *  @vlan: VLAN id to write to VLAN filter
999  *  @vind: VMDq output index that maps queue to VLAN id in VFTA
1000  *  @vlan_on: boolean flag to turn on/off VLAN in VFTA
1001  *  @vlvf_bypass: boolean flag - unused
1002  *
1003  *  Turn on/off specified VLAN in the VLAN filter table.
1004  **/
ixgbe_set_vfta_82598(struct ixgbe_hw * hw,u32 vlan,u32 vind,bool vlan_on,bool vlvf_bypass)1005 s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
1006 			 bool vlan_on, bool vlvf_bypass)
1007 {
1008 	u32 regindex;
1009 	u32 bitindex;
1010 	u32 bits;
1011 	u32 vftabyte;
1012 
1013 	UNREFERENCED_1PARAMETER(vlvf_bypass);
1014 
1015 	DEBUGFUNC("ixgbe_set_vfta_82598");
1016 
1017 	if (vlan > 4095)
1018 		return IXGBE_ERR_PARAM;
1019 
1020 	/* Determine 32-bit word position in array */
1021 	regindex = (vlan >> 5) & 0x7F;   /* upper seven bits */
1022 
1023 	/* Determine the location of the (VMD) queue index */
1024 	vftabyte =  ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
1025 	bitindex = (vlan & 0x7) << 2;    /* lower 3 bits indicate nibble */
1026 
1027 	/* Set the nibble for VMD queue index */
1028 	bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex));
1029 	bits &= (~(0x0F << bitindex));
1030 	bits |= (vind << bitindex);
1031 	IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits);
1032 
1033 	/* Determine the location of the bit for this VLAN id */
1034 	bitindex = vlan & 0x1F;   /* lower five bits */
1035 
1036 	bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
1037 	if (vlan_on)
1038 		/* Turn on this VLAN id */
1039 		bits |= (1 << bitindex);
1040 	else
1041 		/* Turn off this VLAN id */
1042 		bits &= ~(1 << bitindex);
1043 	IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
1044 
1045 	return IXGBE_SUCCESS;
1046 }
1047 
1048 /**
1049  *  ixgbe_clear_vfta_82598 - Clear VLAN filter table
1050  *  @hw: pointer to hardware structure
1051  *
1052  *  Clears the VLAN filer table, and the VMDq index associated with the filter
1053  **/
ixgbe_clear_vfta_82598(struct ixgbe_hw * hw)1054 static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
1055 {
1056 	u32 offset;
1057 	u32 vlanbyte;
1058 
1059 	DEBUGFUNC("ixgbe_clear_vfta_82598");
1060 
1061 	for (offset = 0; offset < hw->mac.vft_size; offset++)
1062 		IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
1063 
1064 	for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
1065 		for (offset = 0; offset < hw->mac.vft_size; offset++)
1066 			IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
1067 					0);
1068 
1069 	return IXGBE_SUCCESS;
1070 }
1071 
1072 /**
1073  *  ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
1074  *  @hw: pointer to hardware structure
1075  *  @reg: analog register to read
1076  *  @val: read value
1077  *
1078  *  Performs read operation to Atlas analog register specified.
1079  **/
ixgbe_read_analog_reg8_82598(struct ixgbe_hw * hw,u32 reg,u8 * val)1080 s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
1081 {
1082 	u32  atlas_ctl;
1083 
1084 	DEBUGFUNC("ixgbe_read_analog_reg8_82598");
1085 
1086 	IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
1087 			IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
1088 	IXGBE_WRITE_FLUSH(hw);
1089 	usec_delay(10);
1090 	atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
1091 	*val = (u8)atlas_ctl;
1092 
1093 	return IXGBE_SUCCESS;
1094 }
1095 
1096 /**
1097  *  ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
1098  *  @hw: pointer to hardware structure
1099  *  @reg: atlas register to write
1100  *  @val: value to write
1101  *
1102  *  Performs write operation to Atlas analog register specified.
1103  **/
ixgbe_write_analog_reg8_82598(struct ixgbe_hw * hw,u32 reg,u8 val)1104 s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
1105 {
1106 	u32  atlas_ctl;
1107 
1108 	DEBUGFUNC("ixgbe_write_analog_reg8_82598");
1109 
1110 	atlas_ctl = (reg << 8) | val;
1111 	IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
1112 	IXGBE_WRITE_FLUSH(hw);
1113 	usec_delay(10);
1114 
1115 	return IXGBE_SUCCESS;
1116 }
1117 
1118 /**
1119  *  ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface.
1120  *  @hw: pointer to hardware structure
1121  *  @dev_addr: address to read from
1122  *  @byte_offset: byte offset to read from dev_addr
1123  *  @eeprom_data: value read
1124  *
1125  *  Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
1126  **/
ixgbe_read_i2c_phy_82598(struct ixgbe_hw * hw,u8 dev_addr,u8 byte_offset,u8 * eeprom_data)1127 static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr,
1128 				    u8 byte_offset, u8 *eeprom_data)
1129 {
1130 	s32 status = IXGBE_SUCCESS;
1131 	u16 sfp_addr = 0;
1132 	u16 sfp_data = 0;
1133 	u16 sfp_stat = 0;
1134 	u16 gssr;
1135 	u32 i;
1136 
1137 	DEBUGFUNC("ixgbe_read_i2c_phy_82598");
1138 
1139 	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
1140 		gssr = IXGBE_GSSR_PHY1_SM;
1141 	else
1142 		gssr = IXGBE_GSSR_PHY0_SM;
1143 
1144 	if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS)
1145 		return IXGBE_ERR_SWFW_SYNC;
1146 
1147 	if (hw->phy.type == ixgbe_phy_nl) {
1148 		/*
1149 		 * NetLogic phy SDA/SCL registers are at addresses 0xC30A to
1150 		 * 0xC30D. These registers are used to talk to the SFP+
1151 		 * module's EEPROM through the SDA/SCL (I2C) interface.
1152 		 */
1153 		sfp_addr = (dev_addr << 8) + byte_offset;
1154 		sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
1155 		hw->phy.ops.write_reg_mdi(hw,
1156 					  IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
1157 					  IXGBE_MDIO_PMA_PMD_DEV_TYPE,
1158 					  sfp_addr);
1159 
1160 		/* Poll status */
1161 		for (i = 0; i < 100; i++) {
1162 			hw->phy.ops.read_reg_mdi(hw,
1163 						IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
1164 						IXGBE_MDIO_PMA_PMD_DEV_TYPE,
1165 						&sfp_stat);
1166 			sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
1167 			if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
1168 				break;
1169 			msec_delay(10);
1170 		}
1171 
1172 		if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
1173 			DEBUGOUT("EEPROM read did not pass.\n");
1174 			status = IXGBE_ERR_SFP_NOT_PRESENT;
1175 			goto out;
1176 		}
1177 
1178 		/* Read data */
1179 		hw->phy.ops.read_reg_mdi(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
1180 					IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data);
1181 
1182 		*eeprom_data = (u8)(sfp_data >> 8);
1183 	} else {
1184 		status = IXGBE_ERR_PHY;
1185 	}
1186 
1187 out:
1188 	hw->mac.ops.release_swfw_sync(hw, gssr);
1189 	return status;
1190 }
1191 
1192 /**
1193  *  ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
1194  *  @hw: pointer to hardware structure
1195  *  @byte_offset: EEPROM byte offset to read
1196  *  @eeprom_data: value read
1197  *
1198  *  Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
1199  **/
ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw * hw,u8 byte_offset,u8 * eeprom_data)1200 s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
1201 				u8 *eeprom_data)
1202 {
1203 	return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR,
1204 					byte_offset, eeprom_data);
1205 }
1206 
1207 /**
1208  *  ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface.
1209  *  @hw: pointer to hardware structure
1210  *  @byte_offset: byte offset at address 0xA2
1211  *  @sff8472_data: value read
1212  *
1213  *  Performs 8 byte read operation to SFP module's SFF-8472 data over I2C
1214  **/
ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw * hw,u8 byte_offset,u8 * sff8472_data)1215 static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
1216 					u8 *sff8472_data)
1217 {
1218 	return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2,
1219 					byte_offset, sff8472_data);
1220 }
1221 
1222 /**
1223  *  ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
1224  *  @hw: pointer to hardware structure
1225  *
1226  *  Determines physical layer capabilities of the current configuration.
1227  **/
ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw * hw)1228 u64 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
1229 {
1230 	u64 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
1231 	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
1232 	u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
1233 	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
1234 	u16 ext_ability = 0;
1235 
1236 	DEBUGFUNC("ixgbe_get_supported_physical_layer_82598");
1237 
1238 	hw->phy.ops.identify(hw);
1239 
1240 	/* Copper PHY must be checked before AUTOC LMS to determine correct
1241 	 * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
1242 	switch (hw->phy.type) {
1243 	case ixgbe_phy_tn:
1244 	case ixgbe_phy_cu_unknown:
1245 		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
1246 		IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
1247 		if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
1248 			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
1249 		if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
1250 			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
1251 		if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
1252 			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
1253 		goto out;
1254 	default:
1255 		break;
1256 	}
1257 
1258 	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
1259 	case IXGBE_AUTOC_LMS_1G_AN:
1260 	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
1261 		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
1262 			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
1263 		else
1264 			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
1265 		break;
1266 	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
1267 		if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
1268 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
1269 		else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
1270 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
1271 		else /* XAUI */
1272 			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
1273 		break;
1274 	case IXGBE_AUTOC_LMS_KX4_AN:
1275 	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
1276 		if (autoc & IXGBE_AUTOC_KX_SUPP)
1277 			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
1278 		if (autoc & IXGBE_AUTOC_KX4_SUPP)
1279 			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
1280 		break;
1281 	default:
1282 		break;
1283 	}
1284 
1285 	if (hw->phy.type == ixgbe_phy_nl) {
1286 		hw->phy.ops.identify_sfp(hw);
1287 
1288 		switch (hw->phy.sfp_type) {
1289 		case ixgbe_sfp_type_da_cu:
1290 			physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
1291 			break;
1292 		case ixgbe_sfp_type_sr:
1293 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
1294 			break;
1295 		case ixgbe_sfp_type_lr:
1296 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
1297 			break;
1298 		default:
1299 			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
1300 			break;
1301 		}
1302 	}
1303 
1304 	switch (hw->device_id) {
1305 	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
1306 		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
1307 		break;
1308 	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
1309 	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
1310 	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
1311 		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
1312 		break;
1313 	case IXGBE_DEV_ID_82598EB_XF_LR:
1314 		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
1315 		break;
1316 	default:
1317 		break;
1318 	}
1319 
1320 out:
1321 	return physical_layer;
1322 }
1323 
1324 /**
1325  *  ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
1326  *  port devices.
1327  *  @hw: pointer to the HW structure
1328  *
1329  *  Calls common function and corrects issue with some single port devices
1330  *  that enable LAN1 but not LAN0.
1331  **/
ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw * hw)1332 void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
1333 {
1334 	struct ixgbe_bus_info *bus = &hw->bus;
1335 	u16 pci_gen = 0;
1336 	u16 pci_ctrl2 = 0;
1337 
1338 	DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie_82598");
1339 
1340 	ixgbe_set_lan_id_multi_port_pcie(hw);
1341 
1342 	/* check if LAN0 is disabled */
1343 	hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen);
1344 	if ((pci_gen != 0) && (pci_gen != 0xFFFF)) {
1345 
1346 		hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2);
1347 
1348 		/* if LAN0 is completely disabled force function to 0 */
1349 		if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) &&
1350 		    !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) &&
1351 		    !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) {
1352 
1353 			bus->func = 0;
1354 		}
1355 	}
1356 }
1357 
1358 /**
1359  *  ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering
1360  *  @hw: pointer to hardware structure
1361  *
1362  **/
ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw * hw)1363 void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw)
1364 {
1365 	u32 regval;
1366 	u32 i;
1367 
1368 	DEBUGFUNC("ixgbe_enable_relaxed_ordering_82598");
1369 
1370 	/* Enable relaxed ordering */
1371 	for (i = 0; ((i < hw->mac.max_tx_queues) &&
1372 	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
1373 		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
1374 		regval |= IXGBE_DCA_TXCTRL_DESC_WRO_EN;
1375 		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
1376 	}
1377 
1378 	for (i = 0; ((i < hw->mac.max_rx_queues) &&
1379 	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
1380 		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
1381 		regval |= IXGBE_DCA_RXCTRL_DATA_WRO_EN |
1382 			  IXGBE_DCA_RXCTRL_HEAD_WRO_EN;
1383 		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
1384 	}
1385 
1386 }
1387 
1388 /**
1389  * ixgbe_set_rxpba_82598 - Initialize RX packet buffer
1390  * @hw: pointer to hardware structure
1391  * @num_pb: number of packet buffers to allocate
1392  * @headroom: reserve n KB of headroom
1393  * @strategy: packet buffer allocation strategy
1394  **/
ixgbe_set_rxpba_82598(struct ixgbe_hw * hw,int num_pb,u32 headroom,int strategy)1395 static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
1396 				  u32 headroom, int strategy)
1397 {
1398 	u32 rxpktsize = IXGBE_RXPBSIZE_64KB;
1399 	u8 i = 0;
1400 	UNREFERENCED_1PARAMETER(headroom);
1401 
1402 	if (!num_pb)
1403 		return;
1404 
1405 	/* Setup Rx packet buffer sizes */
1406 	switch (strategy) {
1407 	case PBA_STRATEGY_WEIGHTED:
1408 		/* Setup the first four at 80KB */
1409 		rxpktsize = IXGBE_RXPBSIZE_80KB;
1410 		for (; i < 4; i++)
1411 			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
1412 		/* Setup the last four at 48KB...don't re-init i */
1413 		rxpktsize = IXGBE_RXPBSIZE_48KB;
1414 		/* Fall Through */
1415 	case PBA_STRATEGY_EQUAL:
1416 	default:
1417 		/* Divide the remaining Rx packet buffer evenly among the TCs */
1418 		for (; i < IXGBE_MAX_PACKET_BUFFERS; i++)
1419 			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
1420 		break;
1421 	}
1422 
1423 	/* Setup Tx packet buffer sizes */
1424 	for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++)
1425 		IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB);
1426 }
1427 
1428 /**
1429  *  ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit
1430  *  @hw: pointer to hardware structure
1431  *  @regval: register value to write to RXCTRL
1432  *
1433  *  Enables the Rx DMA unit
1434  **/
ixgbe_enable_rx_dma_82598(struct ixgbe_hw * hw,u32 regval)1435 s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval)
1436 {
1437 	DEBUGFUNC("ixgbe_enable_rx_dma_82598");
1438 
1439 	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
1440 
1441 	return IXGBE_SUCCESS;
1442 }
1443