xref: /illumos-gate/usr/src/uts/common/io/ib/ibtl/ibtl_qp.c (revision aedf2b3bb56b025fcaf87b49ec6c8aeea07f16d7)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #include <sys/ib/ibtl/impl/ibtl.h>
27 #include <sys/ib/ibtl/impl/ibtl_cm.h>
28 
29 /*
30  * ibtl_qp.c
31  *	These routines implement (most of) the verbs related to
32  *	Queue Pairs.
33  */
34 
35 /* Globals. */
36 static char ibtf_qp[] = "ibtl";
37 
38 /* This table indirectly initializes the ibt_cep_next_state[] table. */
39 typedef struct ibt_cep_next_state_s {
40 	ibt_cep_state_t		next_state;
41 	ibt_cep_modify_flags_t	modify_flags;
42 } ibt_cep_next_state_t;
43 
44 struct	{
45 	ibt_cep_state_t		current_state;
46 	ibt_cep_state_t		next_state;
47 	ibt_cep_modify_flags_t	modify_flags;
48 } ibt_cep_next_state_inits[] = {
49 	{ IBT_STATE_RESET, IBT_STATE_INIT, IBT_CEP_SET_RESET_INIT},
50 	{ IBT_STATE_INIT, IBT_STATE_RTR, IBT_CEP_SET_INIT_RTR},
51 	{ IBT_STATE_RTR, IBT_STATE_RTS, IBT_CEP_SET_RTR_RTS}
52 };
53 
54 ibt_cep_next_state_t ibt_cep_next_state[IBT_STATE_NUM];
55 
56 _NOTE(SCHEME_PROTECTS_DATA("unique", ibt_cep_next_state))
57 
58 /* The following data and functions can increase system stability. */
59 
60 int ibtl_qp_calls_curr;
61 int ibtl_qp_calls_max = 128;	/* limit on # of simultaneous QP verb calls */
62 kmutex_t ibtl_qp_mutex;
63 kcondvar_t ibtl_qp_cv;
64 
65 void
66 ibtl_qp_flow_control_enter(void)
67 {
68 	mutex_enter(&ibtl_qp_mutex);
69 	while (ibtl_qp_calls_curr >= ibtl_qp_calls_max) {
70 		cv_wait(&ibtl_qp_cv, &ibtl_qp_mutex);
71 	}
72 	++ibtl_qp_calls_curr;
73 	mutex_exit(&ibtl_qp_mutex);
74 }
75 
76 void
77 ibtl_qp_flow_control_exit(void)
78 {
79 	mutex_enter(&ibtl_qp_mutex);
80 	cv_signal(&ibtl_qp_cv);
81 	--ibtl_qp_calls_curr;
82 	mutex_exit(&ibtl_qp_mutex);
83 }
84 
85 /*
86  * Function:
87  *	ibt_alloc_qp
88  * Input:
89  *	hca_hdl		HCA Handle.
90  *	type		Specifies the type of QP to alloc in ibt_alloc_qp()
91  *	qp_attrp	Specifies the ibt_qp_alloc_attr_t that are needed to
92  *			allocate a QP and transition it to the RTS state for
93  *			UDs and INIT state for all other QPs.
94  * Output:
95  *	queue_sizes_p	Returned sizes for SQ, RQ, SQ WR SGL elements & RQ
96  *			WR SGL elements.
97  *	qpn_p		Returned QP Number of the allocated QP.
98  *	ibt_qp_p	The ibt_qp_hdl_t of the allocated QP.
99  * Returns:
100  *	IBT_SUCCESS
101  * Description:
102  *	Allocate a QP with specified attributes.
103  */
104 ibt_status_t
105 ibt_alloc_qp(ibt_hca_hdl_t hca_hdl, ibt_qp_type_t type,
106     ibt_qp_alloc_attr_t *qp_attrp, ibt_chan_sizes_t *queue_sizes_p,
107     ib_qpn_t *qpn_p, ibt_qp_hdl_t *ibt_qp_p)
108 {
109 	ibt_status_t		retval;
110 	ibtl_channel_t		*chanp;
111 	ibt_tran_srv_t		qp_type;
112 
113 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_alloc_qp(%p, %d, %p, %p, %p, %p) ",
114 	    hca_hdl, type, qp_attrp, queue_sizes_p, qpn_p, ibt_qp_p);
115 
116 	switch (type) {
117 	case IBT_UD_RQP:
118 		qp_type = IBT_UD_SRV;
119 		break;
120 	case IBT_RC_RQP:
121 		qp_type = IBT_RC_SRV;
122 		break;
123 	case IBT_UC_RQP:
124 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_alloc_qp: Unreliable Connected "
125 		    "Transport Type is not supported.");
126 		*ibt_qp_p = NULL;
127 		return (IBT_NOT_SUPPORTED);
128 	case IBT_RD_RQP:
129 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_alloc_qp: Reliable Datagram "
130 		    "Transport Type is not supported.");
131 		*ibt_qp_p = NULL;
132 		return (IBT_NOT_SUPPORTED);
133 	default:
134 		/* shouldn't happen ILLEGAL Type */
135 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_alloc_qp: Illegal Transport Type "
136 		    "%d", type);
137 		*ibt_qp_p = NULL;
138 		return (IBT_QP_SRV_TYPE_INVALID);
139 	}
140 
141 	/* Get CI CQ handles */
142 	if ((qp_attrp->qp_scq_hdl == NULL) || (qp_attrp->qp_rcq_hdl == NULL)) {
143 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_alloc_qp: Invalid CQ Handle");
144 		*ibt_qp_p = NULL;
145 		return (IBT_CQ_HDL_INVALID);
146 	}
147 	qp_attrp->qp_ibc_scq_hdl = qp_attrp->qp_scq_hdl->cq_ibc_cq_hdl;
148 	qp_attrp->qp_ibc_rcq_hdl = qp_attrp->qp_rcq_hdl->cq_ibc_cq_hdl;
149 
150 	if ((qp_attrp->qp_alloc_flags & IBT_QP_USES_SRQ) &&
151 	    (qp_attrp->qp_srq_hdl != NULL))
152 		qp_attrp->qp_ibc_srq_hdl =
153 		    qp_attrp->qp_srq_hdl->srq_ibc_srq_hdl;
154 	else
155 		qp_attrp->qp_ibc_srq_hdl = NULL;
156 
157 	/* Allocate Channel structure */
158 	chanp = kmem_zalloc(sizeof (*chanp), KM_SLEEP);
159 
160 	ibtl_qp_flow_control_enter();
161 	retval = (IBTL_HCA2CIHCAOPS_P(hca_hdl)->ibc_alloc_qp)(
162 	    IBTL_HCA2CIHCA(hca_hdl), &chanp->ch_qp, type, qp_attrp,
163 	    queue_sizes_p, qpn_p, &chanp->ch_qp.qp_ibc_qp_hdl);
164 	ibtl_qp_flow_control_exit();
165 	if (retval != IBT_SUCCESS) {
166 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_alloc_qp: "
167 		    "Failed to allocate QP: %d", retval);
168 		kmem_free(chanp, sizeof (*chanp));
169 		*ibt_qp_p = NULL;
170 		return (retval);
171 	}
172 
173 	/* Initialize the internal QP struct. */
174 	chanp->ch_qp.qp_type = qp_type;
175 	chanp->ch_qp.qp_hca = hca_hdl;
176 	chanp->ch_qp.qp_send_cq = qp_attrp->qp_scq_hdl;
177 	chanp->ch_qp.qp_recv_cq = qp_attrp->qp_rcq_hdl;
178 	chanp->ch_current_state = IBT_STATE_RESET;
179 	/*
180 	 * The IBTA spec does not include the signal type or PD on a QP
181 	 * query operation. In order to implement the "CLONE" feature
182 	 * we need to cache these values.  Mostly used by TI client.
183 	 */
184 	chanp->ch_qp.qp_flags = qp_attrp->qp_flags;
185 	chanp->ch_qp.qp_pd_hdl = qp_attrp->qp_pd_hdl;
186 	mutex_init(&chanp->ch_cm_mutex, NULL, MUTEX_DEFAULT, NULL);
187 	cv_init(&chanp->ch_cm_cv, NULL, CV_DEFAULT, NULL);
188 
189 	mutex_enter(&hca_hdl->ha_mutex);
190 	hca_hdl->ha_qp_cnt++;
191 	mutex_exit(&hca_hdl->ha_mutex);
192 
193 	IBTF_DPRINTF_L2(ibtf_qp, "ibt_alloc_qp: SUCCESS: qp %p owned by '%s'",
194 	    chanp, hca_hdl->ha_clnt_devp->clnt_name);
195 
196 	*ibt_qp_p = chanp;
197 
198 	return (retval);
199 }
200 
201 
202 /*
203  * Function:
204  *	ibt_initialize_qp
205  * Input:
206  *	ibt_qp		The previously allocated IBT QP Handle.
207  *	modify_attrp	Specifies the QP Modify attributes that to transition
208  *			the QP to the RTS state for UDs (including special QPs)
209  *			and INIT state for all other QPs.
210  * Output:
211  *	none.
212  * Returns:
213  *	IBT_SUCCESS
214  * Description:
215  *	Transition the QP to the RTS state for UDs (including special QPs)
216  *	and INIT state for all other QPs.
217  */
218 ibt_status_t
219 ibt_initialize_qp(ibt_qp_hdl_t ibt_qp, ibt_qp_info_t *modify_attrp)
220 {
221 	ibt_status_t		status;
222 	ibt_cep_state_t		state;
223 	ibc_hca_hdl_t		ibc_hca_hdl = IBTL_CHAN2CIHCA(ibt_qp);
224 	ibc_qp_hdl_t		ibc_qp_hdl = IBTL_CHAN2CIQP(ibt_qp);
225 	ibc_operations_t	*hca_ops_p = IBTL_CHAN2CIHCAOPS_P(ibt_qp);
226 	ibt_cep_modify_flags_t	modify_flags;
227 
228 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_initialize_qp(%p, %p)",
229 	    ibt_qp, modify_attrp);
230 
231 	/*
232 	 * Validate the QP Type from the channel with QP Type from the
233 	 * modify attribute struct.
234 	 */
235 	if (ibt_qp->ch_qp.qp_type != modify_attrp->qp_trans) {
236 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_initialize_qp: "
237 		    "QP Type mismatch: Chan QP Type<%d>, Modify QP Type<%d>",
238 		    ibt_qp->ch_qp.qp_type, modify_attrp->qp_trans);
239 		return (IBT_QP_SRV_TYPE_INVALID);
240 	}
241 	if (ibt_qp->ch_current_state != IBT_STATE_RESET) {
242 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_initialize_qp: "
243 		    "QP needs to be in RESET state: Chan QP State<%d>",
244 		    ibt_qp->ch_current_state);
245 		return (IBT_CHAN_STATE_INVALID);
246 	}
247 
248 	/*
249 	 * Initialize the QP to the RTS state for UDs
250 	 * and INIT state for all other QPs.
251 	 */
252 	switch (modify_attrp->qp_trans) {
253 	case IBT_UD_SRV:
254 
255 		/*
256 		 * Bring the QP to the RTS state.
257 		 */
258 		state = IBT_STATE_RESET;
259 		ibtl_qp_flow_control_enter();
260 		do {
261 			modify_attrp->qp_current_state = state;
262 			modify_flags = ibt_cep_next_state[state].modify_flags;
263 			modify_attrp->qp_state = state =
264 			    ibt_cep_next_state[state].next_state;
265 
266 			IBTF_DPRINTF_L3(ibtf_qp, "ibt_initialize_qp: "
267 			    "modifying qp state to 0x%x", state);
268 			status = (hca_ops_p->ibc_modify_qp)(ibc_hca_hdl,
269 			    ibc_qp_hdl, modify_flags, modify_attrp, NULL);
270 		} while ((state != IBT_STATE_RTS) && (status == IBT_SUCCESS));
271 		ibtl_qp_flow_control_exit();
272 
273 		if (status == IBT_SUCCESS) {
274 			ibt_qp->ch_current_state = state;
275 			ibt_qp->ch_transport.ud.ud_port_num =
276 			    modify_attrp->qp_transport.ud.ud_port;
277 			ibt_qp->ch_transport.ud.ud_qkey =
278 			    modify_attrp->qp_transport.ud.ud_qkey;
279 		}
280 		break;
281 	case IBT_UC_SRV:
282 	case IBT_RD_SRV:
283 	case IBT_RC_SRV:
284 
285 		/*
286 		 * Bring the QP to the INIT state.
287 		 */
288 		modify_attrp->qp_state = IBT_STATE_INIT;
289 
290 		ibtl_qp_flow_control_enter();
291 		status = (hca_ops_p->ibc_modify_qp)(ibc_hca_hdl, ibc_qp_hdl,
292 		    IBT_CEP_SET_RESET_INIT, modify_attrp, NULL);
293 		ibtl_qp_flow_control_exit();
294 		if (status == IBT_SUCCESS)
295 			ibt_qp->ch_current_state = IBT_STATE_INIT;
296 		break;
297 	default:
298 		/* shouldn't happen ILLEGAL Type */
299 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_initialize_qp: Illegal Type %d",
300 		    modify_attrp->qp_trans);
301 		return (IBT_QP_SRV_TYPE_INVALID);
302 	} /* End switch */
303 
304 	return (status);
305 }
306 
307 
308 /*
309  * Function:
310  *	ibt_alloc_special_qp
311  * Input:
312  *	hca_hdl		HCA Handle.
313  *	type		Specifies the type of Special QP to be allocated.
314  *	qp_attrp	Specifies the ibt_qp_alloc_attr_t that are needed to
315  *			allocate a special QP.
316  * Output:
317  *	queue_sizes_p	Returned sizes for SQ, RQ, SQ WR SGL elements & RQ
318  *			WR SGL elements.
319  *	qpn_p		Returned qpn of the allocated QP.
320  *	ibt_qp_p	The ibt_qp_hdl_t of the allocated QP.
321  * Returns:
322  *	IBT_SUCCESS
323  * Description:
324  *	Allocate a special QP with specified attributes.
325  */
326 ibt_status_t
327 ibt_alloc_special_qp(ibt_hca_hdl_t hca_hdl, uint8_t port, ibt_sqp_type_t type,
328     ibt_qp_alloc_attr_t *qp_attrp, ibt_chan_sizes_t *queue_sizes_p,
329     ibt_qp_hdl_t *ibt_qp_p)
330 {
331 	ibt_qp_hdl_t	chanp;
332 	ibt_status_t	retval;
333 	ibt_tran_srv_t	sqp_type;
334 
335 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_alloc_special_qp(%p, %d, %x, %p, %p, %p)",
336 	    hca_hdl, port, type, qp_attrp, queue_sizes_p, ibt_qp_p);
337 
338 	switch (type) {
339 	case IBT_SMI_SQP:
340 	case IBT_GSI_SQP:
341 		sqp_type = IBT_UD_SRV;
342 		break;
343 
344 	case IBT_RAWIP_SQP:
345 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_alloc_special_qp: Raw IP "
346 		    "Transport Type is not supported.");
347 		*ibt_qp_p = NULL;
348 		return (IBT_NOT_SUPPORTED);
349 
350 	case IBT_RAWETHER_SQP:
351 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_alloc_special_qp: Raw Ethernet "
352 		    "Transport Type is not supported.");
353 		*ibt_qp_p = NULL;
354 		return (IBT_NOT_SUPPORTED);
355 
356 	default:
357 		/* Shouldn't happen */
358 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_alloc_special_qp: "
359 		    "Illegal Type 0x%x", type);
360 		*ibt_qp_p = NULL;
361 		return (IBT_QP_SPECIAL_TYPE_INVALID);
362 	}
363 
364 	/* convert the CQ handles for the CI */
365 	qp_attrp->qp_ibc_scq_hdl = qp_attrp->qp_scq_hdl->cq_ibc_cq_hdl;
366 	qp_attrp->qp_ibc_rcq_hdl = qp_attrp->qp_rcq_hdl->cq_ibc_cq_hdl;
367 
368 	/* Allocate Channel structure */
369 	chanp = kmem_zalloc(sizeof (*chanp), KM_SLEEP);
370 
371 	ibtl_qp_flow_control_enter();
372 	retval = (IBTL_HCA2CIHCAOPS_P(hca_hdl)->ibc_alloc_special_qp)(
373 	    IBTL_HCA2CIHCA(hca_hdl), port, &chanp->ch_qp, type, qp_attrp,
374 	    queue_sizes_p, &chanp->ch_qp.qp_ibc_qp_hdl);
375 	ibtl_qp_flow_control_exit();
376 	if (retval != IBT_SUCCESS) {
377 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_alloc_special_qp: "
378 		    "Failed to allocate Special QP: %d", retval);
379 		kmem_free(chanp, sizeof (*chanp));
380 		*ibt_qp_p = NULL;
381 		return (retval);
382 	}
383 
384 	/* Initialize the internal QP struct. */
385 	chanp->ch_qp.qp_type = sqp_type;
386 	chanp->ch_qp.qp_hca = hca_hdl;
387 	chanp->ch_qp.qp_send_cq = qp_attrp->qp_scq_hdl;
388 	chanp->ch_qp.qp_recv_cq = qp_attrp->qp_rcq_hdl;
389 	chanp->ch_current_state = IBT_STATE_RESET;
390 	mutex_init(&chanp->ch_cm_mutex, NULL, MUTEX_DEFAULT, NULL);
391 	cv_init(&chanp->ch_cm_cv, NULL, CV_DEFAULT, NULL);
392 
393 	/* Updating these variable, so that debugger shows correct values. */
394 	chanp->ch_qp.qp_flags = qp_attrp->qp_flags;
395 	chanp->ch_qp.qp_pd_hdl = qp_attrp->qp_pd_hdl;
396 
397 	mutex_enter(&hca_hdl->ha_mutex);
398 	hca_hdl->ha_qp_cnt++;
399 	mutex_exit(&hca_hdl->ha_mutex);
400 
401 	*ibt_qp_p = chanp;
402 
403 	return (retval);
404 }
405 
406 
407 /*
408  * Function:
409  *	ibt_flush_qp
410  * Input:
411  *	ibtl_qp		Handle for QP that needs to be flushed.
412  * Output:
413  *	none.
414  * Returns:
415  *	IBT_SUCCESS
416  *	IBT_QP_HDL_INVALID
417  * Description:
418  *	Put the QP into error state to flush out work requests.
419  */
420 ibt_status_t
421 ibt_flush_qp(ibt_qp_hdl_t ibt_qp)
422 {
423 	ibt_qp_info_t		modify_attr;
424 	ibt_status_t		retval;
425 
426 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_flush_qp(%p)", ibt_qp);
427 
428 	if (ibt_qp->ch_qp.qp_type == IBT_RC_SRV) {
429 		mutex_enter(&ibtl_free_qp_mutex);
430 		if ((ibt_qp->ch_transport.rc.rc_free_flags &
431 		    (IBTL_RC_QP_CONNECTED | IBTL_RC_QP_CLOSING)) ==
432 		    IBTL_RC_QP_CONNECTED) {
433 			mutex_exit(&ibtl_free_qp_mutex);
434 			IBTF_DPRINTF_L2(ibtf_qp, "ibt_flush_qp(%p): "
435 			    "called with a connected RC QP", ibt_qp);
436 			return (IBT_CHAN_STATE_INVALID);
437 		}
438 		mutex_exit(&ibtl_free_qp_mutex);
439 	}
440 
441 	bzero(&modify_attr, sizeof (ibt_qp_info_t));
442 
443 	/*
444 	 * Set the QP state to error to flush any uncompleted WRs.
445 	 */
446 	modify_attr.qp_state = IBT_STATE_ERROR;
447 	modify_attr.qp_trans = ibt_qp->ch_qp.qp_type;
448 
449 	retval = ibt_modify_qp(ibt_qp, IBT_CEP_SET_STATE, &modify_attr, NULL);
450 
451 	if (retval != IBT_SUCCESS) {
452 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_flush_qp: "
453 		    "failed on chan %p: %d", ibt_qp, retval);
454 	}
455 	return (retval);
456 }
457 
458 
459 /*
460  * ibtl_cm_chan_is_open()
461  *
462  *	Inform IBTL that the connection has been established on this
463  *	channel so that a later call to ibtl_cm_chan_is_closed()
464  *	will be required to free the QPN used by this channel.
465  *
466  *	chan	Channel Handle
467  */
468 void
469 ibtl_cm_chan_is_open(ibt_channel_hdl_t chan)
470 {
471 	IBTF_DPRINTF_L3(ibtf_qp, "ibtl_cm_chan_is_open(%p)", chan);
472 	ASSERT(chan->ch_qp.qp_type == IBT_RC_SRV);
473 	mutex_enter(&ibtl_free_qp_mutex);
474 	ASSERT(chan->ch_transport.rc.rc_free_flags == 0);
475 	chan->ch_transport.rc.rc_free_flags |= IBTL_RC_QP_CONNECTED;
476 	mutex_exit(&ibtl_free_qp_mutex);
477 }
478 
479 /*
480  * ibtl_cm_is_chan_closing()
481  *
482  *	Returns 1, if the connection that has been
483  *	started for this channel has moved to TIMEWAIT
484  *	If not, returns 0
485  *
486  *	chan	Channel Handle
487  */
488 int
489 ibtl_cm_is_chan_closing(ibt_channel_hdl_t chan)
490 {
491 	IBTF_DPRINTF_L3(ibtf_qp, "ibtl_cm_is_chan_closing(%p)", chan);
492 	ASSERT(chan->ch_qp.qp_type == IBT_RC_SRV);
493 	mutex_enter(&ibtl_free_qp_mutex);
494 	if (chan->ch_transport.rc.rc_free_flags & IBTL_RC_QP_CLOSING) {
495 		mutex_exit(&ibtl_free_qp_mutex);
496 		return (1);
497 	}
498 	mutex_exit(&ibtl_free_qp_mutex);
499 	return (0);
500 }
501 
502 /*
503  * ibtl_cm_is_chan_closed()
504  *
505  *	Returns 1, if the connection that has been
506  *	started for this channel has completed TIMEWAIT
507  *	If not, returns 0
508  *
509  *	chan	Channel Handle
510  */
511 int
512 ibtl_cm_is_chan_closed(ibt_channel_hdl_t chan)
513 {
514 	IBTF_DPRINTF_L3(ibtf_qp, "ibtl_cm_is_chan_closed(%p)", chan);
515 	ASSERT(chan->ch_qp.qp_type == IBT_RC_SRV);
516 	mutex_enter(&ibtl_free_qp_mutex);
517 	if (chan->ch_transport.rc.rc_free_flags & IBTL_RC_QP_CLOSED) {
518 		mutex_exit(&ibtl_free_qp_mutex);
519 		return (1);
520 	}
521 	mutex_exit(&ibtl_free_qp_mutex);
522 	return (0);
523 }
524 /*
525  * ibtl_cm_chan_is_closing()
526  *
527  *	Inform IBTL that the TIMEWAIT delay for the connection has been
528  *	started for this channel so that the QP can be freed.
529  *
530  *	chan	Channel Handle
531  */
532 void
533 ibtl_cm_chan_is_closing(ibt_channel_hdl_t chan)
534 {
535 	IBTF_DPRINTF_L3(ibtf_qp, "ibtl_cm_chan_is_closing(%p)", chan);
536 	ASSERT(chan->ch_qp.qp_type == IBT_RC_SRV);
537 	mutex_enter(&ibtl_free_qp_mutex);
538 	ASSERT(chan->ch_transport.rc.rc_free_flags == IBTL_RC_QP_CONNECTED);
539 	chan->ch_transport.rc.rc_free_flags |= IBTL_RC_QP_CLOSING;
540 	mutex_exit(&ibtl_free_qp_mutex);
541 }
542 /*
543  * ibtl_cm_chan_is_closed()
544  *
545  *	Inform IBTL that the TIMEWAIT delay for the connection has been
546  *	reached for this channel so that the QPN can be reused.
547  *
548  *	chan	Channel Handle
549  */
550 void
551 ibtl_cm_chan_is_closed(ibt_channel_hdl_t chan)
552 {
553 	ibt_status_t status;
554 	ibtl_hca_t *ibtl_hca = chan->ch_qp.qp_hca;
555 
556 	IBTF_DPRINTF_L3(ibtf_qp, "ibtl_cm_chan_is_closed(%p)", chan);
557 	ASSERT(chan->ch_qp.qp_type == IBT_RC_SRV);
558 	mutex_enter(&ibtl_free_qp_mutex);
559 	ASSERT((chan->ch_transport.rc.rc_free_flags &
560 	    (IBTL_RC_QP_CONNECTED | IBTL_RC_QP_CLOSING)) ==
561 	    (IBTL_RC_QP_CONNECTED | IBTL_RC_QP_CLOSING));
562 
563 	chan->ch_transport.rc.rc_free_flags &= ~IBTL_RC_QP_CONNECTED;
564 	chan->ch_transport.rc.rc_free_flags &= ~IBTL_RC_QP_CLOSING;
565 	chan->ch_transport.rc.rc_free_flags |= IBTL_RC_QP_CLOSED;
566 
567 	ibtl_cm_set_chan_private(chan, NULL);
568 
569 	if ((chan->ch_transport.rc.rc_free_flags & IBTL_RC_QP_FREED) == 0) {
570 		mutex_exit(&ibtl_free_qp_mutex);
571 		return;
572 	}
573 	mutex_exit(&ibtl_free_qp_mutex);
574 	ibtl_qp_flow_control_enter();
575 	if ((status = (IBTL_CHAN2CIHCAOPS_P(chan)->ibc_release_qpn)
576 	    (IBTL_CHAN2CIHCA(chan), chan->ch_transport.rc.rc_qpn_hdl)) ==
577 	    IBT_SUCCESS) {
578 		/* effectively, this is kmem_free(chan); */
579 		ibtl_free_qp_async_check(&chan->ch_qp);
580 
581 		/* decrement ha_qpn_cnt and check for close in progress */
582 		ibtl_close_hca_check(ibtl_hca);
583 	} else
584 		IBTF_DPRINTF_L2(ibtf_qp, "ibtl_cm_chan_is_closed: "
585 		    "ibc_release_qpn failed: status = %d\n", status);
586 	ibtl_qp_flow_control_exit();
587 }
588 
589 /*
590  * ibtl_cm_chan_is_reused()
591  *
592  *	Inform IBTL that the channel is going to be re-used
593  *	chan	Channel Handle
594  */
595 void
596 ibtl_cm_chan_is_reused(ibt_channel_hdl_t chan)
597 {
598 	IBTF_DPRINTF_L3(ibtf_qp, "ibtl_cm_chan_is_reused(%p)", chan);
599 	ASSERT(chan->ch_qp.qp_type == IBT_RC_SRV);
600 	mutex_enter(&ibtl_free_qp_mutex);
601 	ASSERT(((chan->ch_transport.rc.rc_free_flags & IBTL_RC_QP_CONNECTED) !=
602 	    IBTL_RC_QP_CONNECTED));
603 
604 	/* channel is no longer in closed state, shall be re-used */
605 	chan->ch_transport.rc.rc_free_flags = 0;
606 
607 	mutex_exit(&ibtl_free_qp_mutex);
608 
609 }
610 
611 /*
612  * Function:	ibt_free_qp()
613  *
614  * Input:	ibt_qp		Handle for Channel(QP) that needs to be freed.
615  *
616  * Output:	NONE.
617  *
618  * Returns:	IBT_SUCCESS
619  *		IBT_QP_STATE_INVALID
620  *		IBT_QP_HDL_INVALID
621  *
622  * Description:
623  *		Free a previously allocated QP.
624  */
625 ibt_status_t
626 ibt_free_qp(ibt_qp_hdl_t ibt_qp)
627 {
628 	ibt_status_t		status;
629 	ibtl_hca_t		*ibtl_hca = ibt_qp->ch_qp.qp_hca;
630 
631 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_free_qp(%p)", ibt_qp);
632 
633 	if (ibt_qp->ch_qp.qp_type == IBT_RC_SRV) {
634 		ibtl_qp_flow_control_enter();
635 		mutex_enter(&ibtl_free_qp_mutex);
636 		if (ibt_qp->ch_transport.rc.rc_free_flags &
637 		    IBTL_RC_QP_CONNECTED) {
638 			if ((ibt_qp->ch_transport.rc.rc_free_flags &
639 			    IBTL_RC_QP_CLOSING) == 0) {
640 				IBTF_DPRINTF_L2(ibtf_qp, "ibt_free_qp: ERROR - "
641 				    "need to call ibt_close_rc_channel");
642 				mutex_exit(&ibtl_free_qp_mutex);
643 				ibtl_qp_flow_control_exit();
644 				return (IBT_CHAN_STATE_INVALID);
645 			}
646 			ibt_qp->ch_transport.rc.rc_free_flags |=
647 			    IBTL_RC_QP_FREED;
648 			status = (IBTL_CHAN2CIHCAOPS_P(ibt_qp)->ibc_free_qp)
649 			    (IBTL_CHAN2CIHCA(ibt_qp), IBTL_CHAN2CIQP(ibt_qp),
650 			    IBC_FREE_QP_ONLY,
651 			    &ibt_qp->ch_transport.rc.rc_qpn_hdl);
652 			mutex_exit(&ibtl_free_qp_mutex);
653 			ibtl_qp_flow_control_exit();
654 
655 			if (status == IBT_SUCCESS) {
656 				mutex_enter(&ibtl_clnt_list_mutex);
657 				ibtl_hca->ha_qpn_cnt++;
658 				mutex_exit(&ibtl_clnt_list_mutex);
659 				mutex_enter(&ibtl_hca->ha_mutex);
660 				ibtl_hca->ha_qp_cnt--;
661 				mutex_exit(&ibtl_hca->ha_mutex);
662 				IBTF_DPRINTF_L3(ibtf_qp, "ibt_free_qp(%p) - "
663 				    "SUCCESS", ibt_qp);
664 			} else
665 				IBTF_DPRINTF_L2(ibtf_qp, "ibt_free_qp: "
666 				    "ibc_free_qp failed: status = %d", status);
667 			return (status);
668 		}
669 		mutex_exit(&ibtl_free_qp_mutex);
670 	} else
671 		ibtl_qp_flow_control_enter();
672 
673 	status = (IBTL_CHAN2CIHCAOPS_P(ibt_qp)->ibc_free_qp)
674 	    (IBTL_CHAN2CIHCA(ibt_qp), IBTL_CHAN2CIQP(ibt_qp),
675 	    IBC_FREE_QP_AND_QPN, NULL);
676 	ibtl_qp_flow_control_exit();
677 
678 	if (status == IBT_SUCCESS) {
679 		/* effectively, this is kmem_free(ibt_qp); */
680 		ibtl_free_qp_async_check(&ibt_qp->ch_qp);
681 
682 		mutex_enter(&ibtl_hca->ha_mutex);
683 		ibtl_hca->ha_qp_cnt--;
684 		mutex_exit(&ibtl_hca->ha_mutex);
685 		IBTF_DPRINTF_L3(ibtf_qp, "ibt_free_qp(%p) - SUCCESS", ibt_qp);
686 	} else {
687 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_free_qp: "
688 		    "ibc_free_qp failed with error %d", status);
689 	}
690 
691 	return (status);
692 }
693 
694 
695 /* helper function for ibt_query_qp */
696 static void
697 ibtl_fillin_sgid(ibt_cep_path_t *pathp, ibtl_hca_devinfo_t *hca_devp)
698 {
699 	uint8_t port;
700 	uint32_t sgid_ix;
701 	ib_gid_t *sgidp;
702 
703 	port = pathp->cep_hca_port_num;
704 	sgid_ix = pathp->cep_adds_vect.av_sgid_ix;
705 	if (port == 0 || port > hca_devp->hd_hca_attr->hca_nports ||
706 	    sgid_ix >= IBTL_HDIP2SGIDTBLSZ(hca_devp)) {
707 		pathp->cep_adds_vect.av_sgid.gid_prefix = 0;
708 		pathp->cep_adds_vect.av_sgid.gid_guid = 0;
709 	} else {
710 		mutex_enter(&ibtl_clnt_list_mutex);
711 		sgidp = hca_devp->hd_portinfop[port-1].p_sgid_tbl;
712 		pathp->cep_adds_vect.av_sgid = sgidp[sgid_ix];
713 		mutex_exit(&ibtl_clnt_list_mutex);
714 	}
715 }
716 
717 
718 /*
719  * Function:	ibt_query_qp
720  *
721  * Input:	ibt_qp 			- The IBT QP Handle.
722  *
723  * Output:	ibt_qp_query_attrp 	- Points to a ibt_qp_query_attr_t
724  *					  that on return contains all the
725  *					  attributes of the specified qp.
726  *
727  * Returns:	IBT_SUCCESS
728  *		IBT_QP_HDL_INVALID
729  *
730  * Description:
731  *		Query QP attributes
732  *
733  */
734 ibt_status_t
735 ibt_query_qp(ibt_qp_hdl_t ibt_qp, ibt_qp_query_attr_t *qp_query_attrp)
736 {
737 	ibt_status_t		retval;
738 	ibtl_hca_devinfo_t	*hca_devp;
739 	ibt_qp_info_t		*qp_infop;
740 
741 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_query_qp(%p, %p)",
742 	    ibt_qp, qp_query_attrp);
743 
744 	ibtl_qp_flow_control_enter();
745 	retval = (IBTL_CHAN2CIHCAOPS_P(ibt_qp)->ibc_query_qp(
746 	    IBTL_CHAN2CIHCA(ibt_qp), IBTL_CHAN2CIQP(ibt_qp), qp_query_attrp));
747 	ibtl_qp_flow_control_exit();
748 	if (retval == IBT_SUCCESS) {
749 		ibt_qp->ch_current_state = qp_query_attrp->qp_info.qp_state;
750 
751 		/* need to fill in sgid from port and sgid_ix for RC and UC */
752 		hca_devp = ibt_qp->ch_qp.qp_hca->ha_hca_devp;
753 		qp_infop = &qp_query_attrp->qp_info;
754 
755 		switch (qp_infop->qp_trans) {
756 		case IBT_RC_SRV:
757 			ibtl_fillin_sgid(&qp_infop->qp_transport.rc.rc_path,
758 			    hca_devp);
759 			ibtl_fillin_sgid(&qp_infop->qp_transport.rc.rc_alt_path,
760 			    hca_devp);
761 			break;
762 		case IBT_UC_SRV:
763 			ibtl_fillin_sgid(&qp_infop->qp_transport.uc.uc_path,
764 			    hca_devp);
765 			ibtl_fillin_sgid(&qp_infop->qp_transport.uc.uc_alt_path,
766 			    hca_devp);
767 			break;
768 		}
769 	} else {
770 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_query_qp: "
771 		    "failed on chan %p: %d", ibt_qp, retval);
772 	}
773 
774 	return (retval);
775 }
776 
777 
778 /*
779  * Function:
780  *	ibt_modify_qp
781  * Input:
782  *	ibt_qp		The IBT QP Handle.
783  *	flags		Specifies which attributes in ibt_qp_mod_attr_t
784  *			are to be modified.
785  *	qp_attrp	Points to an ibt_qp_mod_attr_t struct that contains all
786  *			the attributes of the specified QP that a client is
787  *			allowed to modify after a QP has been allocated
788  * Output:
789  *	actual_sz	Returned actual queue sizes.
790  * Returns:
791  *	IBT_SUCCESS
792  * Description:
793  *	Modify the attributes of an existing QP.
794  */
795 ibt_status_t
796 ibt_modify_qp(ibt_qp_hdl_t ibt_qp, ibt_cep_modify_flags_t flags,
797     ibt_qp_info_t *modify_attrp, ibt_queue_sizes_t *actual_sz)
798 {
799 	ibt_status_t		retval;
800 
801 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_modify_qp(%p, %d, %p, %p)",
802 	    ibt_qp, flags, modify_attrp, actual_sz);
803 
804 	ibtl_qp_flow_control_enter();
805 	retval = (IBTL_CHAN2CIHCAOPS_P(ibt_qp)->ibc_modify_qp)(
806 	    IBTL_CHAN2CIHCA(ibt_qp), IBTL_CHAN2CIQP(ibt_qp), flags,
807 	    modify_attrp, actual_sz);
808 	ibtl_qp_flow_control_exit();
809 	if (retval == IBT_SUCCESS) {
810 		ibt_qp->ch_current_state = modify_attrp->qp_state;
811 		if (ibt_qp->ch_qp.qp_type == IBT_UD_SRV) {
812 			if (flags & (IBT_CEP_SET_PORT | IBT_CEP_SET_RESET_INIT))
813 				ibt_qp->ch_transport.ud.ud_port_num =
814 				    modify_attrp->qp_transport.ud.ud_port;
815 			if (flags & (IBT_CEP_SET_QKEY | IBT_CEP_SET_RESET_INIT))
816 				ibt_qp->ch_transport.ud.ud_qkey =
817 				    modify_attrp->qp_transport.ud.ud_qkey;
818 		}
819 	} else {
820 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_modify_qp: failed on chan %p: %d",
821 		    ibt_qp, retval);
822 
823 		if (retval == IBT_CHAN_STATE_INVALID) {
824 			/* That means our cache had invalid QP state value. */
825 			ibt_qp_query_attr_t	qp_attr;
826 
827 			/* Query the channel (QP) */
828 			if (ibt_query_qp(ibt_qp, &qp_attr) == IBT_SUCCESS)
829 				ibt_qp->ch_current_state =
830 				    qp_attr.qp_info.qp_state;
831 		}
832 	}
833 	return (retval);
834 }
835 
836 
837 /*
838  * Function:
839  *	ibt_migrate_path
840  * Input:
841  *	rc_chan		A previously allocated RC channel handle.
842  * Output:
843  *	none.
844  * Returns:
845  *	IBT_SUCCESS on Success else appropriate error.
846  * Description:
847  *	Force the CI to use the alternate path. The alternate path becomes
848  *	the primary path. A new alternate path should be loaded and enabled.
849  *	Assumes that the given channel is in RTS/SQD state
850  */
851 ibt_status_t
852 ibt_migrate_path(ibt_channel_hdl_t rc_chan)
853 {
854 	ibt_status_t		retval;
855 	ibt_qp_info_t		qp_info;
856 	ibt_qp_query_attr_t	qp_attr;
857 	ibt_cep_modify_flags_t	cep_flags;
858 	int			retries = 1;
859 
860 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_migrate_path: channel %p", rc_chan);
861 
862 	if (rc_chan->ch_qp.qp_type != IBT_RC_SRV) {
863 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_migrate_path: "
864 		    "Invalid Channel type: Applicable only to RC Channel");
865 		return (IBT_CHAN_SRV_TYPE_INVALID);
866 	}
867 
868 	if (rc_chan->ch_current_state != IBT_STATE_RTS &&
869 	    rc_chan->ch_current_state != IBT_STATE_SQD) {
870 		if (ibt_query_qp(rc_chan, &qp_attr) == IBT_SUCCESS) {
871 			/* ch_current_state is fixed by ibt_query_qp */
872 			if (rc_chan->ch_current_state != IBT_STATE_RTS &&
873 			    rc_chan->ch_current_state != IBT_STATE_SQD)
874 				return (IBT_CHAN_STATE_INVALID);
875 			retries = 0;
876 		} else /* query_qp should never really fail */
877 			return (IBT_CHAN_STATE_INVALID);
878 	}
879 
880 retry:
881 	/* Call modify_qp */
882 	cep_flags = IBT_CEP_SET_MIG | IBT_CEP_SET_STATE;
883 	qp_info.qp_state = rc_chan->ch_current_state;
884 	qp_info.qp_current_state = rc_chan->ch_current_state;
885 	qp_info.qp_trans = IBT_RC_SRV;
886 	qp_info.qp_transport.rc.rc_mig_state = IBT_STATE_MIGRATED;
887 	retval = ibt_modify_qp(rc_chan, cep_flags, &qp_info, NULL);
888 
889 	if (retval != IBT_SUCCESS) {
890 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_migrate_path:"
891 		    " ibt_modify_qp() returned = %d", retval);
892 		if (rc_chan->ch_current_state != qp_info.qp_state &&
893 		    --retries >= 0) {
894 			/*
895 			 * That means our cached 'state' was invalid.
896 			 * We know ibt_modify_qp() fixed it up, so it
897 			 * might be worth retrying.
898 			 */
899 			if (rc_chan->ch_current_state != IBT_STATE_RTS &&
900 			    rc_chan->ch_current_state != IBT_STATE_SQD)
901 				return (IBT_CHAN_STATE_INVALID);
902 			IBTF_DPRINTF_L2(ibtf_qp, "ibt_migrate_path:"
903 			    " retrying after 'state' fixed");
904 			goto retry;
905 		}
906 	}
907 	return (retval);
908 }
909 
910 
911 /*
912  * Function:
913  *	ibt_set_qp_private
914  * Input:
915  *	ibt_qp		The ibt_qp_hdl_t of the allocated QP.
916  *	clnt_private	The client private data.
917  * Output:
918  *	none.
919  * Returns:
920  *	none.
921  * Description:
922  *	Set the client private data.
923  */
924 void
925 ibt_set_qp_private(ibt_qp_hdl_t ibt_qp, void *clnt_private)
926 {
927 	ibt_qp->ch_clnt_private = clnt_private;
928 }
929 
930 
931 /*
932  * Function:
933  *	ibt_get_qp_private
934  * Input:
935  *	ibt_qp		The ibt_qp_hdl_t of the allocated QP.
936  * Output:
937  *	none.
938  * Returns:
939  *	The client private data.
940  * Description:
941  *	Get the client private data.
942  */
943 void *
944 ibt_get_qp_private(ibt_qp_hdl_t ibt_qp)
945 {
946 	return (ibt_qp->ch_clnt_private);
947 }
948 
949 
950 /*
951  * Function:
952  *	ibt_qp_to_hca_guid
953  * Input:
954  *	ibt_qp		The ibt_qp_hdl_t of the allocated QP.
955  * Output:
956  *	none.
957  * Returns:
958  *	hca_guid	Returned HCA GUID on which the specified QP is
959  *			allocated. Valid if it is non-NULL on return.
960  * Description:
961  *	A helper function to retrieve HCA GUID for the specified QP.
962  */
963 ib_guid_t
964 ibt_qp_to_hca_guid(ibt_qp_hdl_t ibt_qp)
965 {
966 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_qp_to_hca_guid(%p)", ibt_qp);
967 
968 	return (IBTL_HCA2HCAGUID(IBTL_CHAN2HCA(ibt_qp)));
969 }
970 
971 
972 /*
973  * Function:
974  *	ibt_recover_ud_qp
975  * Input:
976  *	ibt_qp		An QP Handle which is in SQError state.
977  * Output:
978  *	none.
979  * Returns:
980  *	IBT_SUCCESS
981  *	IBT_QP_SRV_TYPE_INVALID
982  *	IBT_QP_STATE_INVALID.
983  * Description:
984  *	Recover an UD QP which has transitioned to SQ Error state. The
985  *	ibt_recover_ud_qp() transitions the QP from SQ Error state to
986  *	Ready-To-Send QP state.
987  *
988  *	If a work request posted to a UD QP's send queue completes with an
989  *	error (see ibt_wc_status_t), the QP gets transitioned to SQ Error state.
990  *	In order to reuse this QP, ibt_recover_ud_qp() can be used to recover
991  *	the QP to a usable (Ready-to-Send) state.
992  */
993 ibt_status_t
994 ibt_recover_ud_qp(ibt_qp_hdl_t ibt_qp)
995 {
996 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_recover_ud_qp(%p)", ibt_qp);
997 
998 	return (ibt_recover_ud_channel(IBTL_QP2CHAN(ibt_qp)));
999 }
1000 
1001 
1002 /*
1003  * Function:
1004  *	ibt_recycle_ud
1005  * Input:
1006  *	ud_chan		The IBT UD QP Handle.
1007  *	various attributes
1008  *
1009  * Output:
1010  *	none
1011  * Returns:
1012  *	IBT_SUCCESS
1013  *	IBT_CHAN_SRV_TYPE_INVALID
1014  *	IBT_CHAN_STATE_INVALID
1015  *
1016  * Description:
1017  *	Revert the UD QP back to a usable state.
1018  */
1019 ibt_status_t
1020 ibt_recycle_ud(ibt_channel_hdl_t ud_chan, uint8_t hca_port_num,
1021     uint16_t pkey_ix, ib_qkey_t qkey)
1022 {
1023 	ibt_qp_query_attr_t	qp_attr;
1024 	ibt_status_t		retval;
1025 
1026 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_recycle_ud(%p, %d, %x, %x): ",
1027 	    ud_chan, hca_port_num, pkey_ix, qkey);
1028 
1029 	if (ud_chan->ch_qp.qp_type != IBT_UD_SRV) {
1030 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_recycle_ud: "
1031 		    "chan %p is not a UD channel", ud_chan);
1032 		return (IBT_CHAN_SRV_TYPE_INVALID);
1033 	}
1034 
1035 	retval = ibt_query_qp(ud_chan, &qp_attr);
1036 	if (retval != IBT_SUCCESS) {
1037 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_recycle_ud: "
1038 		    "ibt_query_qp failed on chan %p: %d", ud_chan, retval);
1039 		return (retval);
1040 	}
1041 	if (qp_attr.qp_info.qp_state != IBT_STATE_ERROR) {
1042 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_recycle_ud: "
1043 		    "chan %p is in state %d (not in ERROR state)",
1044 		    ud_chan, qp_attr.qp_info.qp_state);
1045 		ud_chan->ch_current_state = qp_attr.qp_info.qp_state;
1046 		return (IBT_CHAN_STATE_INVALID);
1047 	}
1048 
1049 	/* transition the QP from ERROR to RESET */
1050 	qp_attr.qp_info.qp_state = IBT_STATE_RESET;
1051 	qp_attr.qp_info.qp_trans = ud_chan->ch_qp.qp_type;
1052 	retval = ibt_modify_qp(ud_chan, IBT_CEP_SET_STATE, &qp_attr.qp_info,
1053 	    NULL);
1054 	if (retval != IBT_SUCCESS) {
1055 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_recycle_ud: "
1056 		    "ibt_modify_qp(ERROR=>RESET) failed on chan %p: %d",
1057 		    ud_chan, retval);
1058 		return (retval);
1059 	}
1060 	ud_chan->ch_current_state = IBT_STATE_RESET;
1061 
1062 	/* transition the QP back to RTS */
1063 	qp_attr.qp_info.qp_transport.ud.ud_port = hca_port_num;
1064 	qp_attr.qp_info.qp_transport.ud.ud_qkey = qkey;
1065 	qp_attr.qp_info.qp_transport.ud.ud_pkey_ix = pkey_ix;
1066 	retval = ibt_initialize_qp(ud_chan, &qp_attr.qp_info);
1067 	if (retval != IBT_SUCCESS) {
1068 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_recycle_ud: "
1069 		    "ibt_initialize_qp failed on chan %p: %d", ud_chan, retval);
1070 		/* the man page says the QP should be left in ERROR state */
1071 		(void) ibt_flush_qp(ud_chan);
1072 	}
1073 	return (retval);
1074 }
1075 
1076 /*
1077  * Function:
1078  *	ibt_pause_sendq
1079  * Input:
1080  *	chan		The IBT QP Handle.
1081  *	modify_flags	IBT_CEP_SET_NOTHING or IBT_CEP_SET_SQD_EVENT
1082  *
1083  * Output:
1084  *	none.
1085  * Returns:
1086  *	IBT_SUCCESS
1087  *	IBT_CHAN_HDL_INVALID
1088  *	IBT_CHAN_STATE_INVALID
1089  *	IBT_INVALID_PARAM
1090  *
1091  * Description:
1092  *	Place the send queue of the specified channel into the send queue
1093  *	drained (SQD) state.
1094  *
1095  */
1096 ibt_status_t
1097 ibt_pause_sendq(ibt_channel_hdl_t chan, ibt_cep_modify_flags_t modify_flags)
1098 {
1099 	ibt_qp_info_t		modify_attr;
1100 	ibt_status_t		retval;
1101 
1102 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_pause_sendq(%p, %x)", chan, modify_flags);
1103 
1104 	modify_flags &= IBT_CEP_SET_SQD_EVENT;	/* ignore other bits */
1105 	modify_flags |= IBT_CEP_SET_STATE;
1106 
1107 	bzero(&modify_attr, sizeof (ibt_qp_info_t));
1108 	/*
1109 	 * Set the QP state to SQD.
1110 	 */
1111 	modify_attr.qp_state = IBT_STATE_SQD;
1112 	modify_attr.qp_trans = chan->ch_qp.qp_type;
1113 
1114 	retval = ibt_modify_qp(chan, modify_flags, &modify_attr, NULL);
1115 
1116 	if (retval != IBT_SUCCESS) {
1117 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_pause_sendq: "
1118 		    "failed on chan %p: %d", chan, retval);
1119 	}
1120 	return (retval);
1121 }
1122 
1123 
1124 /*
1125  * Function:
1126  *	ibt_unpause_sendq
1127  * Input:
1128  *	chan	The IBT Channel Handle.
1129  * Output:
1130  *	none.
1131  * Returns:
1132  *	IBT_SUCCESS
1133  *	IBT_CHAN_HDL_INVALID
1134  *	IBT_CHAN_STATE_INVALID
1135  * Description:
1136  *	Un-pauses the previously paused channel. This call will transition the
1137  *	QP from SQD to RTS state.
1138  */
1139 ibt_status_t
1140 ibt_unpause_sendq(ibt_channel_hdl_t chan)
1141 {
1142 	ibt_qp_info_t		modify_attr;
1143 	ibt_status_t		retval;
1144 
1145 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_unpause_sendq(%p)", chan);
1146 
1147 	bzero(&modify_attr, sizeof (ibt_qp_info_t));
1148 
1149 	/*
1150 	 * Set the QP state to RTS.
1151 	 */
1152 	modify_attr.qp_current_state = IBT_STATE_SQD;
1153 	modify_attr.qp_state = IBT_STATE_RTS;
1154 	modify_attr.qp_trans = chan->ch_qp.qp_type;
1155 
1156 	retval = ibt_modify_qp(chan, IBT_CEP_SET_STATE, &modify_attr, NULL);
1157 	if (retval != IBT_SUCCESS) {
1158 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_unpause_sendq: "
1159 		    "failed on chan %p: %d", chan, retval);
1160 	}
1161 	return (retval);
1162 }
1163 
1164 
1165 /*
1166  * Function:
1167  *	ibt_resize_queues
1168  * Input:
1169  *	chan		A previously allocated channel handle.
1170  *	flags		QP Flags
1171  *				IBT_SEND_Q
1172  *				IBT_RECV_Q
1173  *	request_sz	Requested new sizes.
1174  * Output:
1175  *	actual_sz	Returned actual sizes.
1176  * Returns:
1177  *	IBT_SUCCESS
1178  * Description:
1179  *	Resize the SendQ/RecvQ sizes of a channel. Can only be called on
1180  *	a previously opened channel.
1181  */
1182 ibt_status_t
1183 ibt_resize_queues(ibt_channel_hdl_t chan, ibt_qflags_t flags,
1184     ibt_queue_sizes_t *request_sz, ibt_queue_sizes_t *actual_sz)
1185 {
1186 	ibt_cep_modify_flags_t	modify_flags = IBT_CEP_SET_STATE;
1187 	ibt_qp_info_t		modify_attr;
1188 	ibt_status_t		retval;
1189 
1190 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_resize_queues(%p, 0x%X, %p, %p)",
1191 	    chan, flags, request_sz, actual_sz);
1192 
1193 	if ((flags & (IBT_SEND_Q | IBT_RECV_Q)) == 0)  {
1194 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_resize_queues: "
1195 		    "Flags <0x%X> not set", flags);
1196 		return (IBT_INVALID_PARAM);
1197 	}
1198 
1199 	bzero(&modify_attr, sizeof (ibt_qp_info_t));
1200 
1201 	modify_attr.qp_current_state = chan->ch_current_state;
1202 	modify_attr.qp_trans = chan->ch_qp.qp_type;
1203 	modify_attr.qp_state = chan->ch_current_state;
1204 
1205 	if (flags & IBT_SEND_Q) {
1206 		modify_attr.qp_sq_sz = request_sz->qs_sq;
1207 		modify_flags |= IBT_CEP_SET_SQ_SIZE;
1208 	}
1209 
1210 	if (flags & IBT_RECV_Q) {
1211 		modify_attr.qp_rq_sz = request_sz->qs_rq;
1212 		modify_flags |= IBT_CEP_SET_RQ_SIZE;
1213 	}
1214 
1215 	retval = ibt_modify_qp(chan, modify_flags, &modify_attr, actual_sz);
1216 	if (retval != IBT_SUCCESS) {
1217 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_resize_queues: "
1218 		    "failed on QP %p: %d", chan, retval);
1219 	}
1220 
1221 	return (retval);
1222 }
1223 
1224 
1225 /*
1226  * Function:
1227  *	ibt_query_queues
1228  * Input:
1229  *	chan		A previously allocated channel handle.
1230  * Output:
1231  *	actual_sz	Returned actual sizes.
1232  * Returns:
1233  *	IBT_SUCCESS
1234  * Description:
1235  *	Query the SendQ/RecvQ sizes of a channel.
1236  */
1237 ibt_status_t
1238 ibt_query_queues(ibt_channel_hdl_t chan, ibt_queue_sizes_t *actual_sz)
1239 {
1240 	ibt_status_t		retval;
1241 	ibt_qp_query_attr_t	qp_query_attr;
1242 
1243 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_query_queues(%p)", chan);
1244 
1245 	/* Perform Query QP and retrieve QP sizes. */
1246 	retval = ibt_query_qp(chan, &qp_query_attr);
1247 	if (retval != IBT_SUCCESS) {
1248 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_query_queues: "
1249 		    "ibt_query_qp failed: qp %p: %d", chan, retval);
1250 		return (retval);
1251 	}
1252 
1253 	_NOTE(NOW_INVISIBLE_TO_OTHER_THREADS(actual_sz->qs_rq,
1254 	    actual_sz->qs_sq))
1255 	actual_sz->qs_sq = qp_query_attr.qp_info.qp_sq_sz;
1256 	actual_sz->qs_rq = qp_query_attr.qp_info.qp_rq_sz;
1257 	_NOTE(NOW_VISIBLE_TO_OTHER_THREADS(actual_sz->qs_rq,
1258 	    actual_sz->qs_sq))
1259 	chan->ch_current_state = qp_query_attr.qp_info.qp_state;
1260 
1261 	return (retval);
1262 }
1263 
1264 
1265 /*
1266  * Function:
1267  *	ibt_modify_rdma
1268  * Input:
1269  *	rc_chan		A previously allocated channel handle.
1270  *
1271  *	modify_flags	Bitwise "or" of any of the following:
1272  *			IBT_CEP_SET_RDMA_R	Enable/Disable RDMA RD
1273  *			IBT_CEP_SET_RDMA_W	Enable/Disable RDMA WR
1274  *			IBT_CEP_SET_ATOMIC	Enable/Disable Atomics
1275  *
1276  *	flags		Channel End Point (CEP) Disable Flags (0 => enable).
1277  *			IBT_CEP_NO_RDMA_RD	Disable incoming RDMA RD's
1278  *			IBT_CEP_NO_RDMA_WR	Disable incoming RDMA WR's
1279  *			IBT_CEP_NO_ATOMIC	Disable incoming Atomics.
1280  * Output:
1281  *	none.
1282  * Returns:
1283  *	IBT_SUCCESS
1284  *	IBT_QP_SRV_TYPE_INVALID
1285  *	IBT_CHAN_HDL_INVALID
1286  *	IBT_CHAN_ATOMICS_NOT_SUPPORTED
1287  *	IBT_CHAN_STATE_INVALID
1288  * Description:
1289  *	Enable/disable RDMA operations. To enable an operation clear the
1290  *	"disable" flag. Can call this function when the channel is in
1291  *	INIT, RTS or SQD states. If called in any other state
1292  *	IBT_CHAN_STATE_INVALID is returned. When the operation completes the
1293  *	channel state is left unchanged.
1294  */
1295 ibt_status_t
1296 ibt_modify_rdma(ibt_channel_hdl_t rc_chan,
1297     ibt_cep_modify_flags_t modify_flags, ibt_cep_flags_t flags)
1298 {
1299 	ibt_status_t		retval;
1300 	ibt_qp_info_t		modify_attr;
1301 
1302 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_modify_rdma(%p, 0x%x, 0x%x)",
1303 	    rc_chan, modify_flags, flags);
1304 
1305 	if (rc_chan->ch_qp.qp_type != IBT_RC_SRV) {
1306 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_modify_rdma: "
1307 		    "Invalid Channel type: 0x%X, Applicable only to RC Channel",
1308 		    rc_chan->ch_qp.qp_type);
1309 		return (IBT_QP_SRV_TYPE_INVALID);
1310 	}
1311 
1312 	bzero(&modify_attr, sizeof (ibt_qp_info_t));
1313 
1314 	/*
1315 	 * Can only call this function when the channel in INIT, RTS or SQD
1316 	 * states.
1317 	 */
1318 	if ((rc_chan->ch_current_state != IBT_STATE_INIT) &&
1319 	    (rc_chan->ch_current_state != IBT_STATE_RTS) &&
1320 	    (rc_chan->ch_current_state != IBT_STATE_SQD)) {
1321 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_modify_rdma: Invalid Channel "
1322 		    "state: 0x%X", rc_chan->ch_current_state);
1323 		return (IBT_CHAN_STATE_INVALID);
1324 	}
1325 
1326 	modify_attr.qp_state = modify_attr.qp_current_state =
1327 	    rc_chan->ch_current_state;
1328 	modify_attr.qp_trans = rc_chan->ch_qp.qp_type;
1329 	modify_attr.qp_flags = flags;
1330 
1331 	modify_flags &= (IBT_CEP_SET_RDMA_R | IBT_CEP_SET_RDMA_W |
1332 	    IBT_CEP_SET_ATOMIC);
1333 	modify_flags |= IBT_CEP_SET_STATE;
1334 
1335 	retval = ibt_modify_qp(rc_chan, modify_flags, &modify_attr, NULL);
1336 	if (retval != IBT_SUCCESS) {
1337 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_modify_rdma: "
1338 		    "failed on chan %p: %d", rc_chan, retval);
1339 	}
1340 	return (retval);
1341 }
1342 
1343 
1344 /*
1345  * Function:
1346  *	ibt_set_rdma_resource
1347  * Input:
1348  *	chan		A previously allocated RC channel handle.
1349  *	modify_flags	Bitwise "or" of any of the following:
1350  *			IBT_CEP_SET_RDMARA_OUT	Initiator depth (rdma_ra_out)
1351  *			IBT_CEP_SET_RDMARA_IN	Responder Resources
1352  *						(rdma_ra_in)
1353  *	rdma_ra_out	Outgoing RDMA Reads/Atomics
1354  *	rdma_ra_in	Incoming RDMA Reads/Atomics
1355  * Output:
1356  *	none.
1357  * Returns:
1358  *	IBT_SUCCESS
1359  * Description:
1360  *	Change the number of resources to be used for incoming and outgoing
1361  *	RDMA reads & Atomics. Can only be called on a previously opened
1362  *	RC channel.  Can only be called on a paused channel, and this will
1363  *	un-pause that channel.
1364  */
1365 ibt_status_t
1366 ibt_set_rdma_resource(ibt_channel_hdl_t chan,
1367     ibt_cep_modify_flags_t modify_flags, uint8_t rdma_ra_out,
1368     uint8_t resp_rdma_ra_out)
1369 {
1370 	ibt_qp_info_t		modify_attr;
1371 	ibt_status_t		retval;
1372 
1373 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_set_rdma_resource(%p, 0x%x, %d, %d)",
1374 	    chan, modify_flags, rdma_ra_out, resp_rdma_ra_out);
1375 
1376 	if (chan->ch_qp.qp_type != IBT_RC_SRV) {
1377 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_set_rdma_resource: "
1378 		    "Invalid Channel type: 0x%X, Applicable only to RC Channel",
1379 		    chan->ch_qp.qp_type);
1380 		return (IBT_CHAN_SRV_TYPE_INVALID);
1381 	}
1382 
1383 	bzero(&modify_attr, sizeof (ibt_qp_info_t));
1384 
1385 	modify_attr.qp_trans = chan->ch_qp.qp_type;
1386 	modify_attr.qp_state = IBT_STATE_SQD;
1387 
1388 	modify_attr.qp_transport.rc.rc_rdma_ra_out = rdma_ra_out;
1389 	modify_attr.qp_transport.rc.rc_rdma_ra_in = resp_rdma_ra_out;
1390 	modify_flags &= (IBT_CEP_SET_RDMARA_OUT | IBT_CEP_SET_RDMARA_IN);
1391 	modify_flags |= IBT_CEP_SET_STATE;
1392 
1393 	retval = ibt_modify_qp(chan, modify_flags, &modify_attr, NULL);
1394 	if (retval != IBT_SUCCESS) {
1395 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_set_rdma_resource: "
1396 		    "failed on chan %p: %d", chan, retval);
1397 	}
1398 	return (retval);
1399 }
1400 
1401 
1402 /*
1403  * Function:
1404  *	ibt_change_port
1405  * Input:
1406  *	rc_chan		A previously allocated RC channel handle.
1407  *	port_num	New HCA port.
1408  * Output:
1409  *	none.
1410  * Returns:
1411  *	IBT_SUCCESS
1412  * Description:
1413  *	Change the primary physical port of a channel. (This is done only if
1414  *	HCA supports this capability).
1415  */
1416 ibt_status_t
1417 ibt_change_port(ibt_channel_hdl_t chan, uint8_t port_num)
1418 {
1419 	ibt_cep_modify_flags_t	modify_flags;
1420 	ibt_qp_info_t		modify_attr;
1421 	ibt_status_t		retval;
1422 
1423 	IBTF_DPRINTF_L3(ibtf_qp, "ibt_change_port(%p, %d)", chan, port_num);
1424 
1425 	if (chan->ch_qp.qp_type != IBT_RC_SRV) {
1426 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_change_port: "
1427 		    "Invalid Channel type: 0x%X, Applicable only to RC Channel",
1428 		    chan->ch_qp.qp_type);
1429 		return (IBT_CHAN_SRV_TYPE_INVALID);
1430 	}
1431 	bzero(&modify_attr, sizeof (ibt_qp_info_t));
1432 
1433 	modify_attr.qp_state = IBT_STATE_SQD;
1434 	modify_attr.qp_trans = chan->ch_qp.qp_type;
1435 	modify_attr.qp_transport.rc.rc_path.cep_hca_port_num = port_num;
1436 
1437 	modify_flags = IBT_CEP_SET_STATE | IBT_CEP_SET_PORT;
1438 
1439 	retval = ibt_modify_qp(chan, modify_flags, &modify_attr, NULL);
1440 	if (retval != IBT_SUCCESS) {
1441 		IBTF_DPRINTF_L2(ibtf_qp, "ibt_change_port: "
1442 		    "failed on chan %p: %d", chan, retval);
1443 	}
1444 	return (retval);
1445 }
1446 
1447 
1448 void
1449 ibtl_init_cep_states(void)
1450 {
1451 	int	index;
1452 	int	ibt_nstate_inits;
1453 
1454 	IBTF_DPRINTF_L3(ibtf_qp, "ibtl_init_cep_states()");
1455 
1456 	ibt_nstate_inits = sizeof (ibt_cep_next_state_inits) /
1457 	    sizeof (ibt_cep_next_state_inits[0]);
1458 
1459 	/*
1460 	 * Initialize CEP next state table, using an indirect lookup table so
1461 	 * that this code isn't dependent on the ibt_cep_state_t enum values.
1462 	 */
1463 	for (index = 0; index < ibt_nstate_inits; index++) {
1464 		ibt_cep_state_t	state;
1465 
1466 		state = ibt_cep_next_state_inits[index].current_state;
1467 
1468 		ibt_cep_next_state[state].next_state =
1469 		    ibt_cep_next_state_inits[index].next_state;
1470 
1471 		ibt_cep_next_state[state].modify_flags =
1472 		    ibt_cep_next_state_inits[index].modify_flags;
1473 	}
1474 }
1475