1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 /* 28 * hermon.c 29 * Hermon (InfiniBand) HCA Driver attach/detach Routines 30 * 31 * Implements all the routines necessary for the attach, setup, 32 * initialization (and subsequent possible teardown and detach) of the 33 * Hermon InfiniBand HCA driver. 34 */ 35 36 #include <sys/types.h> 37 #include <sys/file.h> 38 #include <sys/open.h> 39 #include <sys/conf.h> 40 #include <sys/ddi.h> 41 #include <sys/sunddi.h> 42 #include <sys/modctl.h> 43 #include <sys/stat.h> 44 #include <sys/pci.h> 45 #include <sys/pci_cap.h> 46 #include <sys/bitmap.h> 47 #include <sys/policy.h> 48 49 #include <sys/ib/adapters/hermon/hermon.h> 50 51 /* The following works around a problem in pre-2_7_000 firmware. */ 52 #define HERMON_FW_WORKAROUND 53 54 int hermon_verbose = 0; 55 56 /* Hermon HCA State Pointer */ 57 void *hermon_statep; 58 59 int debug_vpd = 0; 60 61 /* Disable the internal error-check polling thread */ 62 int hermon_no_inter_err_chk = 0; 63 64 /* 65 * The Hermon "userland resource database" is common to instances of the 66 * Hermon HCA driver. This structure "hermon_userland_rsrc_db" contains all 67 * the necessary information to maintain it. 68 */ 69 hermon_umap_db_t hermon_userland_rsrc_db; 70 71 static int hermon_attach(dev_info_t *, ddi_attach_cmd_t); 72 static int hermon_detach(dev_info_t *, ddi_detach_cmd_t); 73 static int hermon_open(dev_t *, int, int, cred_t *); 74 static int hermon_close(dev_t, int, int, cred_t *); 75 static int hermon_getinfo(dev_info_t *, ddi_info_cmd_t, void *, void **); 76 77 static int hermon_drv_init(hermon_state_t *state, dev_info_t *dip, 78 int instance); 79 static void hermon_drv_fini(hermon_state_t *state); 80 static void hermon_drv_fini2(hermon_state_t *state); 81 static int hermon_isr_init(hermon_state_t *state); 82 static void hermon_isr_fini(hermon_state_t *state); 83 84 static int hermon_hw_init(hermon_state_t *state); 85 86 static void hermon_hw_fini(hermon_state_t *state, 87 hermon_drv_cleanup_level_t cleanup); 88 static int hermon_soft_state_init(hermon_state_t *state); 89 static void hermon_soft_state_fini(hermon_state_t *state); 90 static int hermon_icm_config_setup(hermon_state_t *state, 91 hermon_hw_initqueryhca_t *inithca); 92 static void hermon_icm_tables_init(hermon_state_t *state); 93 static void hermon_icm_tables_fini(hermon_state_t *state); 94 static int hermon_icm_dma_init(hermon_state_t *state); 95 static void hermon_icm_dma_fini(hermon_state_t *state); 96 static void hermon_inithca_set(hermon_state_t *state, 97 hermon_hw_initqueryhca_t *inithca); 98 static int hermon_hca_port_init(hermon_state_t *state); 99 static int hermon_hca_ports_shutdown(hermon_state_t *state, uint_t num_init); 100 static int hermon_internal_uarpg_init(hermon_state_t *state); 101 static void hermon_internal_uarpg_fini(hermon_state_t *state); 102 static int hermon_special_qp_contexts_reserve(hermon_state_t *state); 103 static void hermon_special_qp_contexts_unreserve(hermon_state_t *state); 104 static int hermon_sw_reset(hermon_state_t *state); 105 static int hermon_mcg_init(hermon_state_t *state); 106 static void hermon_mcg_fini(hermon_state_t *state); 107 static int hermon_fw_version_check(hermon_state_t *state); 108 static void hermon_device_info_report(hermon_state_t *state); 109 static int hermon_pci_capability_list(hermon_state_t *state, 110 ddi_acc_handle_t hdl); 111 static void hermon_pci_capability_vpd(hermon_state_t *state, 112 ddi_acc_handle_t hdl, uint_t offset); 113 static int hermon_pci_read_vpd(ddi_acc_handle_t hdl, uint_t offset, 114 uint32_t addr, uint32_t *data); 115 static int hermon_intr_or_msi_init(hermon_state_t *state); 116 static int hermon_add_intrs(hermon_state_t *state, int intr_type); 117 static int hermon_intr_or_msi_fini(hermon_state_t *state); 118 void hermon_pci_capability_msix(hermon_state_t *state, ddi_acc_handle_t hdl, 119 uint_t offset); 120 121 static uint64_t hermon_size_icm(hermon_state_t *state); 122 123 /* X86 fastreboot support */ 124 static ushort_t get_msix_ctrl(dev_info_t *); 125 static size_t get_msix_tbl_size(dev_info_t *); 126 static size_t get_msix_pba_size(dev_info_t *); 127 static void hermon_set_msix_info(hermon_state_t *); 128 static int hermon_intr_disable(hermon_state_t *); 129 static int hermon_quiesce(dev_info_t *); 130 131 132 /* Character/Block Operations */ 133 static struct cb_ops hermon_cb_ops = { 134 hermon_open, /* open */ 135 hermon_close, /* close */ 136 nodev, /* strategy (block) */ 137 nodev, /* print (block) */ 138 nodev, /* dump (block) */ 139 nodev, /* read */ 140 nodev, /* write */ 141 hermon_ioctl, /* ioctl */ 142 hermon_devmap, /* devmap */ 143 NULL, /* mmap */ 144 nodev, /* segmap */ 145 nochpoll, /* chpoll */ 146 ddi_prop_op, /* prop_op */ 147 NULL, /* streams */ 148 D_NEW | D_MP | 149 D_64BIT | /* D_HOTPLUG | */ 150 D_DEVMAP, /* flags */ 151 CB_REV /* rev */ 152 }; 153 154 /* Driver Operations */ 155 static struct dev_ops hermon_ops = { 156 DEVO_REV, /* struct rev */ 157 0, /* refcnt */ 158 hermon_getinfo, /* getinfo */ 159 nulldev, /* identify */ 160 nulldev, /* probe */ 161 hermon_attach, /* attach */ 162 hermon_detach, /* detach */ 163 nodev, /* reset */ 164 &hermon_cb_ops, /* cb_ops */ 165 NULL, /* bus_ops */ 166 nodev, /* power */ 167 hermon_quiesce, /* devo_quiesce */ 168 }; 169 170 /* Module Driver Info */ 171 static struct modldrv hermon_modldrv = { 172 &mod_driverops, 173 "ConnectX IB Driver", 174 &hermon_ops 175 }; 176 177 /* Module Linkage */ 178 static struct modlinkage hermon_modlinkage = { 179 MODREV_1, 180 &hermon_modldrv, 181 NULL 182 }; 183 184 /* 185 * This extern refers to the ibc_operations_t function vector that is defined 186 * in the hermon_ci.c file. 187 */ 188 extern ibc_operations_t hermon_ibc_ops; 189 190 /* 191 * _init() 192 */ 193 int 194 _init() 195 { 196 int status; 197 198 status = ddi_soft_state_init(&hermon_statep, sizeof (hermon_state_t), 199 (size_t)HERMON_INITIAL_STATES); 200 if (status != 0) { 201 return (status); 202 } 203 204 status = ibc_init(&hermon_modlinkage); 205 if (status != 0) { 206 ddi_soft_state_fini(&hermon_statep); 207 return (status); 208 } 209 210 status = mod_install(&hermon_modlinkage); 211 if (status != 0) { 212 ibc_fini(&hermon_modlinkage); 213 ddi_soft_state_fini(&hermon_statep); 214 return (status); 215 } 216 217 /* Initialize the Hermon "userland resources database" */ 218 hermon_umap_db_init(); 219 220 return (status); 221 } 222 223 224 /* 225 * _info() 226 */ 227 int 228 _info(struct modinfo *modinfop) 229 { 230 int status; 231 232 status = mod_info(&hermon_modlinkage, modinfop); 233 return (status); 234 } 235 236 237 /* 238 * _fini() 239 */ 240 int 241 _fini() 242 { 243 int status; 244 245 status = mod_remove(&hermon_modlinkage); 246 if (status != 0) { 247 return (status); 248 } 249 250 /* Destroy the Hermon "userland resources database" */ 251 hermon_umap_db_fini(); 252 253 ibc_fini(&hermon_modlinkage); 254 ddi_soft_state_fini(&hermon_statep); 255 256 return (status); 257 } 258 259 260 /* 261 * hermon_getinfo() 262 */ 263 /* ARGSUSED */ 264 static int 265 hermon_getinfo(dev_info_t *dip, ddi_info_cmd_t cmd, void *arg, void **result) 266 { 267 dev_t dev; 268 hermon_state_t *state; 269 minor_t instance; 270 271 switch (cmd) { 272 case DDI_INFO_DEVT2DEVINFO: 273 dev = (dev_t)arg; 274 instance = HERMON_DEV_INSTANCE(dev); 275 state = ddi_get_soft_state(hermon_statep, instance); 276 if (state == NULL) { 277 return (DDI_FAILURE); 278 } 279 *result = (void *)state->hs_dip; 280 return (DDI_SUCCESS); 281 282 case DDI_INFO_DEVT2INSTANCE: 283 dev = (dev_t)arg; 284 instance = HERMON_DEV_INSTANCE(dev); 285 *result = (void *)(uintptr_t)instance; 286 return (DDI_SUCCESS); 287 288 default: 289 break; 290 } 291 292 return (DDI_FAILURE); 293 } 294 295 296 /* 297 * hermon_open() 298 */ 299 /* ARGSUSED */ 300 static int 301 hermon_open(dev_t *devp, int flag, int otyp, cred_t *credp) 302 { 303 hermon_state_t *state; 304 hermon_rsrc_t *rsrcp; 305 hermon_umap_db_entry_t *umapdb, *umapdb2; 306 minor_t instance; 307 uint64_t key, value; 308 uint_t hr_indx; 309 dev_t dev; 310 int status; 311 312 instance = HERMON_DEV_INSTANCE(*devp); 313 state = ddi_get_soft_state(hermon_statep, instance); 314 if (state == NULL) { 315 return (ENXIO); 316 } 317 318 /* 319 * Only allow driver to be opened for character access, and verify 320 * whether exclusive access is allowed. 321 */ 322 if ((otyp != OTYP_CHR) || ((flag & FEXCL) && 323 secpolicy_excl_open(credp) != 0)) { 324 return (EINVAL); 325 } 326 327 /* 328 * Search for the current process PID in the "userland resources 329 * database". If it is not found, then attempt to allocate a UAR 330 * page and add the ("key", "value") pair to the database. 331 * Note: As a last step we always return a devp appropriate for 332 * the open. Either we return a new minor number (based on the 333 * instance and the UAR page index) or we return the current minor 334 * number for the given client process. 335 * 336 * We also add an entry to the database to allow for lookup from 337 * "dev_t" to the current process PID. This is necessary because, 338 * under certain circumstance, the process PID that calls the Hermon 339 * close() entry point may not be the same as the one who called 340 * open(). Specifically, this can happen if a child process calls 341 * the Hermon's open() entry point, gets a UAR page, maps it out (using 342 * mmap()), and then exits without calling munmap(). Because mmap() 343 * adds a reference to the file descriptor, at the exit of the child 344 * process the file descriptor is "inherited" by the parent (and will 345 * be close()'d by the parent's PID only when it exits). 346 * 347 * Note: We use the hermon_umap_db_find_nolock() and 348 * hermon_umap_db_add_nolock() database access routines below (with 349 * an explicit mutex_enter of the database lock - "hdl_umapdb_lock") 350 * to ensure that the multiple accesses (in this case searching for, 351 * and then adding _two_ database entries) can be done atomically. 352 */ 353 key = ddi_get_pid(); 354 mutex_enter(&hermon_userland_rsrc_db.hdl_umapdb_lock); 355 status = hermon_umap_db_find_nolock(instance, key, 356 MLNX_UMAP_UARPG_RSRC, &value, 0, NULL); 357 if (status != DDI_SUCCESS) { 358 /* 359 * If we are in 'maintenance mode', we cannot alloc a UAR page. 360 * But we still need some rsrcp value, and a mostly unique 361 * hr_indx value. So we set rsrcp to NULL for maintenance 362 * mode, and use a rolling count for hr_indx. The field 363 * 'hs_open_hr_indx' is used only in this maintenance mode 364 * condition. 365 * 366 * Otherwise, if we are in operational mode then we allocate 367 * the UAR page as normal, and use the rsrcp value and tr_indx 368 * value from that allocation. 369 */ 370 if (!HERMON_IS_OPERATIONAL(state->hs_operational_mode)) { 371 rsrcp = NULL; 372 hr_indx = state->hs_open_ar_indx++; 373 } else { 374 /* Allocate a new UAR page for this process */ 375 status = hermon_rsrc_alloc(state, HERMON_UARPG, 1, 376 HERMON_NOSLEEP, &rsrcp); 377 if (status != DDI_SUCCESS) { 378 mutex_exit( 379 &hermon_userland_rsrc_db.hdl_umapdb_lock); 380 return (EAGAIN); 381 } 382 383 hr_indx = rsrcp->hr_indx; 384 } 385 386 /* 387 * Allocate an entry to track the UAR page resource in the 388 * "userland resources database". 389 */ 390 umapdb = hermon_umap_db_alloc(instance, key, 391 MLNX_UMAP_UARPG_RSRC, (uint64_t)(uintptr_t)rsrcp); 392 if (umapdb == NULL) { 393 mutex_exit(&hermon_userland_rsrc_db.hdl_umapdb_lock); 394 /* If in "maintenance mode", don't free the rsrc */ 395 if (HERMON_IS_OPERATIONAL(state->hs_operational_mode)) { 396 hermon_rsrc_free(state, &rsrcp); 397 } 398 return (EAGAIN); 399 } 400 401 /* 402 * Create a new device number. Minor number is a function of 403 * the UAR page index (15 bits) and the device instance number 404 * (3 bits). 405 */ 406 dev = makedevice(getmajor(*devp), (hr_indx << 407 HERMON_MINORNUM_SHIFT) | instance); 408 409 /* 410 * Allocate another entry in the "userland resources database" 411 * to track the association of the device number (above) to 412 * the current process ID (in "key"). 413 */ 414 umapdb2 = hermon_umap_db_alloc(instance, dev, 415 MLNX_UMAP_PID_RSRC, (uint64_t)key); 416 if (umapdb2 == NULL) { 417 mutex_exit(&hermon_userland_rsrc_db.hdl_umapdb_lock); 418 hermon_umap_db_free(umapdb); 419 /* If in "maintenance mode", don't free the rsrc */ 420 if (HERMON_IS_OPERATIONAL(state->hs_operational_mode)) { 421 hermon_rsrc_free(state, &rsrcp); 422 } 423 return (EAGAIN); 424 } 425 426 /* Add the entries to the database */ 427 hermon_umap_db_add_nolock(umapdb); 428 hermon_umap_db_add_nolock(umapdb2); 429 430 } else { 431 /* 432 * Return the same device number as on the original open() 433 * call. This was calculated as a function of the UAR page 434 * index (top 16 bits) and the device instance number 435 */ 436 rsrcp = (hermon_rsrc_t *)(uintptr_t)value; 437 dev = makedevice(getmajor(*devp), (rsrcp->hr_indx << 438 HERMON_MINORNUM_SHIFT) | instance); 439 } 440 mutex_exit(&hermon_userland_rsrc_db.hdl_umapdb_lock); 441 442 *devp = dev; 443 444 return (0); 445 } 446 447 448 /* 449 * hermon_close() 450 */ 451 /* ARGSUSED */ 452 static int 453 hermon_close(dev_t dev, int flag, int otyp, cred_t *credp) 454 { 455 hermon_state_t *state; 456 hermon_rsrc_t *rsrcp; 457 hermon_umap_db_entry_t *umapdb; 458 hermon_umap_db_priv_t *priv; 459 minor_t instance; 460 uint64_t key, value; 461 int status, reset_status = 0; 462 463 instance = HERMON_DEV_INSTANCE(dev); 464 state = ddi_get_soft_state(hermon_statep, instance); 465 if (state == NULL) { 466 return (ENXIO); 467 } 468 469 /* 470 * Search for "dev_t" in the "userland resources database". As 471 * explained above in hermon_open(), we can't depend on using the 472 * current process ID here to do the lookup because the process 473 * that ultimately closes may not be the same one who opened 474 * (because of inheritance). 475 * So we lookup the "dev_t" (which points to the PID of the process 476 * that opened), and we remove the entry from the database (and free 477 * it up). Then we do another query based on the PID value. And when 478 * we find that database entry, we free it up too and then free the 479 * Hermon UAR page resource. 480 * 481 * Note: We use the hermon_umap_db_find_nolock() database access 482 * routine below (with an explicit mutex_enter of the database lock) 483 * to ensure that the multiple accesses (which attempt to remove the 484 * two database entries) can be done atomically. 485 * 486 * This works the same in both maintenance mode and HCA mode, except 487 * for the call to hermon_rsrc_free(). In the case of maintenance mode, 488 * this call is not needed, as it was not allocated in hermon_open() 489 * above. 490 */ 491 key = dev; 492 mutex_enter(&hermon_userland_rsrc_db.hdl_umapdb_lock); 493 status = hermon_umap_db_find_nolock(instance, key, MLNX_UMAP_PID_RSRC, 494 &value, HERMON_UMAP_DB_REMOVE, &umapdb); 495 if (status == DDI_SUCCESS) { 496 /* 497 * If the "hdb_priv" field is non-NULL, it indicates that 498 * some "on close" handling is still necessary. Call 499 * hermon_umap_db_handle_onclose_cb() to do the handling (i.e. 500 * to invoke all the registered callbacks). Then free up 501 * the resources associated with "hdb_priv" and continue 502 * closing. 503 */ 504 priv = (hermon_umap_db_priv_t *)umapdb->hdbe_common.hdb_priv; 505 if (priv != NULL) { 506 reset_status = hermon_umap_db_handle_onclose_cb(priv); 507 kmem_free(priv, sizeof (hermon_umap_db_priv_t)); 508 umapdb->hdbe_common.hdb_priv = (void *)NULL; 509 } 510 511 hermon_umap_db_free(umapdb); 512 513 /* 514 * Now do another lookup using PID as the key (copy it from 515 * "value"). When this lookup is complete, the "value" field 516 * will contain the hermon_rsrc_t pointer for the UAR page 517 * resource. 518 */ 519 key = value; 520 status = hermon_umap_db_find_nolock(instance, key, 521 MLNX_UMAP_UARPG_RSRC, &value, HERMON_UMAP_DB_REMOVE, 522 &umapdb); 523 if (status == DDI_SUCCESS) { 524 hermon_umap_db_free(umapdb); 525 /* If in "maintenance mode", don't free the rsrc */ 526 if (HERMON_IS_OPERATIONAL(state->hs_operational_mode)) { 527 rsrcp = (hermon_rsrc_t *)(uintptr_t)value; 528 hermon_rsrc_free(state, &rsrcp); 529 } 530 } 531 } 532 mutex_exit(&hermon_userland_rsrc_db.hdl_umapdb_lock); 533 return (reset_status); 534 } 535 536 537 /* 538 * hermon_attach() 539 * Context: Only called from attach() path context 540 */ 541 static int 542 hermon_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) 543 { 544 hermon_state_t *state; 545 ibc_clnt_hdl_t tmp_ibtfpriv; 546 ibc_status_t ibc_status; 547 int instance; 548 int status; 549 550 #ifdef __lock_lint 551 (void) hermon_quiesce(dip); 552 #endif 553 554 switch (cmd) { 555 case DDI_ATTACH: 556 instance = ddi_get_instance(dip); 557 status = ddi_soft_state_zalloc(hermon_statep, instance); 558 if (status != DDI_SUCCESS) { 559 cmn_err(CE_NOTE, "hermon%d: driver failed to attach: " 560 "attach_ssz_fail", instance); 561 goto fail_attach_nomsg; 562 563 } 564 state = ddi_get_soft_state(hermon_statep, instance); 565 if (state == NULL) { 566 ddi_soft_state_free(hermon_statep, instance); 567 cmn_err(CE_NOTE, "hermon%d: driver failed to attach: " 568 "attach_gss_fail", instance); 569 goto fail_attach_nomsg; 570 } 571 572 /* clear the attach error buffer */ 573 HERMON_ATTACH_MSG_INIT(state->hs_attach_buf); 574 575 /* Save away devinfo and instance before hermon_fm_init() */ 576 state->hs_dip = dip; 577 state->hs_instance = instance; 578 579 hermon_fm_init(state); 580 581 /* 582 * Initialize Hermon driver and hardware. 583 * 584 * Note: If this initialization fails we may still wish to 585 * create a device node and remain operational so that Hermon 586 * firmware can be updated/flashed (i.e. "maintenance mode"). 587 * If this is the case, then "hs_operational_mode" will be 588 * equal to HERMON_MAINTENANCE_MODE. We will not attempt to 589 * attach to the IBTF or register with the IBMF (i.e. no 590 * InfiniBand interfaces will be enabled). 591 */ 592 status = hermon_drv_init(state, dip, instance); 593 if ((status != DDI_SUCCESS) && 594 (HERMON_IS_OPERATIONAL(state->hs_operational_mode))) { 595 goto fail_attach; 596 } 597 598 /* 599 * Change the Hermon FM mode 600 */ 601 if ((hermon_get_state(state) & HCA_PIO_FM) && 602 HERMON_IS_OPERATIONAL(state->hs_operational_mode)) { 603 /* 604 * Now we wait for 50ms to give an opportunity 605 * to Solaris FMA so that HW errors can be notified. 606 * Then check if there are HW errors or not. If 607 * a HW error is detected, the Hermon attachment 608 * must be failed. 609 */ 610 delay(drv_usectohz(50000)); 611 if (hermon_init_failure(state)) { 612 hermon_drv_fini(state); 613 HERMON_WARNING(state, "unable to " 614 "attach Hermon due to a HW error"); 615 HERMON_ATTACH_MSG(state->hs_attach_buf, 616 "hermon_attach_failure"); 617 goto fail_attach; 618 } 619 620 /* 621 * There seems no HW errors during the attachment, 622 * so let's change the Hermon FM state to the 623 * ereport only mode. 624 */ 625 if (hermon_fm_ereport_init(state) != DDI_SUCCESS) { 626 /* unwind the resources */ 627 hermon_drv_fini(state); 628 HERMON_ATTACH_MSG(state->hs_attach_buf, 629 "hermon_attach_failure"); 630 goto fail_attach; 631 } 632 } 633 634 /* Create the minor node for device */ 635 status = ddi_create_minor_node(dip, "devctl", S_IFCHR, instance, 636 DDI_PSEUDO, 0); 637 if (status != DDI_SUCCESS) { 638 hermon_drv_fini(state); 639 HERMON_ATTACH_MSG(state->hs_attach_buf, 640 "attach_create_mn_fail"); 641 goto fail_attach; 642 } 643 644 /* 645 * If we are in "maintenance mode", then we don't want to 646 * register with the IBTF. All InfiniBand interfaces are 647 * uninitialized, and the device is only capable of handling 648 * requests to update/flash firmware (or test/debug requests). 649 */ 650 if (HERMON_IS_OPERATIONAL(state->hs_operational_mode)) { 651 cmn_err(CE_NOTE, "!Hermon is operational\n"); 652 653 /* Attach to InfiniBand Transport Framework (IBTF) */ 654 ibc_status = ibc_attach(&tmp_ibtfpriv, 655 &state->hs_ibtfinfo); 656 if (ibc_status != IBC_SUCCESS) { 657 cmn_err(CE_CONT, "hermon_attach: ibc_attach " 658 "failed\n"); 659 ddi_remove_minor_node(dip, "devctl"); 660 hermon_drv_fini(state); 661 HERMON_ATTACH_MSG(state->hs_attach_buf, 662 "attach_ibcattach_fail"); 663 goto fail_attach; 664 } 665 666 /* 667 * Now that we've successfully attached to the IBTF, 668 * we enable all appropriate asynch and CQ events to 669 * be forwarded to the IBTF. 670 */ 671 HERMON_ENABLE_IBTF_CALLB(state, tmp_ibtfpriv); 672 673 ibc_post_attach(state->hs_ibtfpriv); 674 675 /* Register agents with IB Mgmt Framework (IBMF) */ 676 status = hermon_agent_handlers_init(state); 677 if (status != DDI_SUCCESS) { 678 (void) ibc_pre_detach(tmp_ibtfpriv, DDI_DETACH); 679 HERMON_QUIESCE_IBTF_CALLB(state); 680 if (state->hs_in_evcallb != 0) { 681 HERMON_WARNING(state, "unable to " 682 "quiesce Hermon IBTF callbacks"); 683 } 684 ibc_detach(tmp_ibtfpriv); 685 ddi_remove_minor_node(dip, "devctl"); 686 hermon_drv_fini(state); 687 HERMON_ATTACH_MSG(state->hs_attach_buf, 688 "attach_agentinit_fail"); 689 goto fail_attach; 690 } 691 } 692 693 /* Report attach in maintenance mode, if appropriate */ 694 if (!(HERMON_IS_OPERATIONAL(state->hs_operational_mode))) { 695 cmn_err(CE_NOTE, "hermon%d: driver attached " 696 "(for maintenance mode only)", state->hs_instance); 697 hermon_fm_ereport(state, HCA_IBA_ERR, HCA_ERR_DEGRADED); 698 } 699 700 /* Report that driver was loaded */ 701 ddi_report_dev(dip); 702 703 /* Send device information to log file */ 704 hermon_device_info_report(state); 705 706 /* DEBUG PRINT */ 707 cmn_err(CE_CONT, "!Hermon attach complete\n"); 708 return (DDI_SUCCESS); 709 710 case DDI_RESUME: 711 /* Add code here for DDI_RESUME XXX */ 712 return (DDI_FAILURE); 713 714 default: 715 cmn_err(CE_WARN, "hermon_attach: unknown cmd (0x%x)\n", cmd); 716 break; 717 } 718 719 fail_attach: 720 cmn_err(CE_NOTE, "hermon%d: driver failed to attach: %s", instance, 721 state->hs_attach_buf); 722 if (hermon_get_state(state) & HCA_EREPORT_FM) { 723 hermon_fm_ereport(state, HCA_SYS_ERR, HCA_ERR_SRV_LOST); 724 } 725 hermon_drv_fini2(state); 726 hermon_fm_fini(state); 727 ddi_soft_state_free(hermon_statep, instance); 728 729 fail_attach_nomsg: 730 return (DDI_FAILURE); 731 } 732 733 734 /* 735 * hermon_detach() 736 * Context: Only called from detach() path context 737 */ 738 static int 739 hermon_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) 740 { 741 hermon_state_t *state; 742 ibc_clnt_hdl_t tmp_ibtfpriv; 743 ibc_status_t ibc_status; 744 int instance, status; 745 746 instance = ddi_get_instance(dip); 747 state = ddi_get_soft_state(hermon_statep, instance); 748 if (state == NULL) { 749 return (DDI_FAILURE); 750 } 751 752 switch (cmd) { 753 case DDI_DETACH: 754 /* 755 * If we are in "maintenance mode", then we do not want to 756 * do teardown for any of the InfiniBand interfaces. 757 * Specifically, this means not detaching from IBTF (we never 758 * attached to begin with) and not deregistering from IBMF. 759 */ 760 if (HERMON_IS_OPERATIONAL(state->hs_operational_mode)) { 761 /* Unregister agents from IB Mgmt Framework (IBMF) */ 762 status = hermon_agent_handlers_fini(state); 763 if (status != DDI_SUCCESS) { 764 return (DDI_FAILURE); 765 } 766 767 /* 768 * Attempt the "pre-detach" from InfiniBand Transport 769 * Framework (IBTF). At this point the IBTF is still 770 * capable of handling incoming asynch and completion 771 * events. This "pre-detach" is primarily a mechanism 772 * to notify the appropriate IBTF clients that the 773 * HCA is being removed/offlined. 774 */ 775 ibc_status = ibc_pre_detach(state->hs_ibtfpriv, cmd); 776 if (ibc_status != IBC_SUCCESS) { 777 status = hermon_agent_handlers_init(state); 778 if (status != DDI_SUCCESS) { 779 HERMON_WARNING(state, "failed to " 780 "restart Hermon agents"); 781 } 782 return (DDI_FAILURE); 783 } 784 785 /* 786 * Before we can fully detach from the IBTF we need to 787 * ensure that we have handled all outstanding event 788 * callbacks. This is accomplished by quiescing the 789 * event callback mechanism. Note: if we are unable 790 * to successfully quiesce the callbacks, then this is 791 * an indication that something has probably gone 792 * seriously wrong. We print out a warning, but 793 * continue. 794 */ 795 tmp_ibtfpriv = state->hs_ibtfpriv; 796 HERMON_QUIESCE_IBTF_CALLB(state); 797 if (state->hs_in_evcallb != 0) { 798 HERMON_WARNING(state, "unable to quiesce " 799 "Hermon IBTF callbacks"); 800 } 801 802 /* Complete the detach from the IBTF */ 803 ibc_detach(tmp_ibtfpriv); 804 } 805 806 /* Remove the minor node for device */ 807 ddi_remove_minor_node(dip, "devctl"); 808 809 /* 810 * Only call hermon_drv_fini() if we are in Hermon HCA mode. 811 * (Because if we are in "maintenance mode", then we never 812 * successfully finished init.) Only report successful 813 * detach for normal HCA mode. 814 */ 815 if (HERMON_IS_OPERATIONAL(state->hs_operational_mode)) { 816 /* Cleanup driver resources and shutdown hardware */ 817 hermon_drv_fini(state); 818 cmn_err(CE_CONT, "!Hermon driver successfully " 819 "detached\n"); 820 } 821 822 hermon_drv_fini2(state); 823 hermon_fm_fini(state); 824 ddi_soft_state_free(hermon_statep, instance); 825 826 return (DDI_SUCCESS); 827 828 case DDI_SUSPEND: 829 /* Add code here for DDI_SUSPEND XXX */ 830 return (DDI_FAILURE); 831 832 default: 833 cmn_err(CE_WARN, "hermon_detach: unknown cmd (0x%x)\n", cmd); 834 break; 835 } 836 837 return (DDI_FAILURE); 838 } 839 840 /* 841 * hermon_dma_attr_init() 842 * Context: Can be called from interrupt or base context. 843 */ 844 845 /* ARGSUSED */ 846 void 847 hermon_dma_attr_init(hermon_state_t *state, ddi_dma_attr_t *dma_attr) 848 { 849 _NOTE(NOW_INVISIBLE_TO_OTHER_THREADS(*dma_attr)) 850 851 dma_attr->dma_attr_version = DMA_ATTR_V0; 852 dma_attr->dma_attr_addr_lo = 0; 853 dma_attr->dma_attr_addr_hi = 0xFFFFFFFFFFFFFFFFull; 854 dma_attr->dma_attr_count_max = 0xFFFFFFFFFFFFFFFFull; 855 dma_attr->dma_attr_align = HERMON_PAGESIZE; /* default 4K */ 856 dma_attr->dma_attr_burstsizes = 0x3FF; 857 dma_attr->dma_attr_minxfer = 1; 858 dma_attr->dma_attr_maxxfer = 0xFFFFFFFFFFFFFFFFull; 859 dma_attr->dma_attr_seg = 0xFFFFFFFFFFFFFFFFull; 860 dma_attr->dma_attr_sgllen = 0x7FFFFFFF; 861 dma_attr->dma_attr_granular = 1; 862 dma_attr->dma_attr_flags = 0; 863 } 864 865 /* 866 * hermon_dma_alloc() 867 * Context: Can be called from base context. 868 */ 869 int 870 hermon_dma_alloc(hermon_state_t *state, hermon_dma_info_t *dma_info, 871 uint16_t opcode) 872 { 873 ddi_dma_handle_t dma_hdl; 874 ddi_dma_attr_t dma_attr; 875 ddi_acc_handle_t acc_hdl; 876 ddi_dma_cookie_t cookie; 877 uint64_t kaddr; 878 uint64_t real_len; 879 uint_t ccount; 880 int status; 881 882 hermon_dma_attr_init(state, &dma_attr); 883 884 /* Allocate a DMA handle */ 885 status = ddi_dma_alloc_handle(state->hs_dip, &dma_attr, DDI_DMA_SLEEP, 886 NULL, &dma_hdl); 887 if (status != DDI_SUCCESS) { 888 IBTF_DPRINTF_L2("DMA", "alloc handle failed: %d", status); 889 cmn_err(CE_CONT, "DMA alloc handle failed(status %d)", status); 890 return (DDI_FAILURE); 891 } 892 893 /* Allocate DMA memory */ 894 status = ddi_dma_mem_alloc(dma_hdl, dma_info->length, 895 &state->hs_reg_accattr, DDI_DMA_CONSISTENT, DDI_DMA_SLEEP, NULL, 896 (caddr_t *)&kaddr, (size_t *)&real_len, &acc_hdl); 897 if (status != DDI_SUCCESS) { 898 ddi_dma_free_handle(&dma_hdl); 899 IBTF_DPRINTF_L2("DMA", "memory alloc failed: %d", status); 900 cmn_err(CE_CONT, "DMA memory alloc failed(status %d)", status); 901 return (DDI_FAILURE); 902 } 903 bzero((caddr_t)(uintptr_t)kaddr, real_len); 904 905 /* Bind the memory to the handle */ 906 status = ddi_dma_addr_bind_handle(dma_hdl, NULL, 907 (caddr_t)(uintptr_t)kaddr, (size_t)real_len, DDI_DMA_RDWR | 908 DDI_DMA_CONSISTENT, DDI_DMA_SLEEP, NULL, &cookie, &ccount); 909 if (status != DDI_SUCCESS) { 910 ddi_dma_mem_free(&acc_hdl); 911 ddi_dma_free_handle(&dma_hdl); 912 IBTF_DPRINTF_L2("DMA", "bind handle failed: %d", status); 913 cmn_err(CE_CONT, "DMA bind handle failed(status %d)", status); 914 return (DDI_FAILURE); 915 } 916 917 /* Package the hermon_dma_info contents and return */ 918 dma_info->vaddr = kaddr; 919 dma_info->dma_hdl = dma_hdl; 920 dma_info->acc_hdl = acc_hdl; 921 922 /* Pass the mapping information to the firmware */ 923 status = hermon_map_cmd_post(state, dma_info, opcode, cookie, ccount); 924 if (status != DDI_SUCCESS) { 925 char *s; 926 hermon_dma_free(dma_info); 927 switch (opcode) { 928 case MAP_ICM: 929 s = "MAP_ICM"; 930 break; 931 case MAP_FA: 932 s = "MAP_FA"; 933 break; 934 case MAP_ICM_AUX: 935 s = "MAP_ICM_AUX"; 936 break; 937 default: 938 s = "UNKNOWN"; 939 } 940 cmn_err(CE_NOTE, "Map cmd '%s' failed, status %08x\n", 941 s, status); 942 return (DDI_FAILURE); 943 } 944 945 return (DDI_SUCCESS); 946 } 947 948 /* 949 * hermon_dma_free() 950 * Context: Can be called from base context. 951 */ 952 void 953 hermon_dma_free(hermon_dma_info_t *info) 954 { 955 /* Unbind the handles and free the memory */ 956 (void) ddi_dma_unbind_handle(info->dma_hdl); 957 ddi_dma_mem_free(&info->acc_hdl); 958 ddi_dma_free_handle(&info->dma_hdl); 959 } 960 961 /* These macros are valid for use only in hermon_icm_alloc/hermon_icm_free. */ 962 #define HERMON_ICM_ALLOC(rsrc) \ 963 hermon_icm_alloc(state, rsrc, index1, index2) 964 #define HERMON_ICM_FREE(rsrc) \ 965 hermon_icm_free(state, rsrc, index1, index2) 966 967 /* 968 * hermon_icm_alloc() 969 * Context: Can be called from base context. 970 * 971 * Only one thread can be here for a given hermon_rsrc_type_t "type". 972 */ 973 int 974 hermon_icm_alloc(hermon_state_t *state, hermon_rsrc_type_t type, 975 uint32_t index1, uint32_t index2) 976 { 977 hermon_icm_table_t *icm; 978 hermon_dma_info_t *dma_info; 979 uint8_t *bitmap; 980 int status; 981 982 if (hermon_verbose) { 983 IBTF_DPRINTF_L2("hermon", "hermon_icm_alloc: rsrc_type (0x%x) " 984 "index1/2 (0x%x/0x%x)", type, index1, index2); 985 } 986 987 icm = &state->hs_icm[type]; 988 989 switch (type) { 990 case HERMON_QPC: 991 status = HERMON_ICM_ALLOC(HERMON_CMPT_QPC); 992 if (status != DDI_SUCCESS) { 993 return (status); 994 } 995 status = HERMON_ICM_ALLOC(HERMON_RDB); 996 if (status != DDI_SUCCESS) { /* undo icm_alloc's */ 997 HERMON_ICM_FREE(HERMON_CMPT_QPC); 998 return (status); 999 } 1000 status = HERMON_ICM_ALLOC(HERMON_ALTC); 1001 if (status != DDI_SUCCESS) { /* undo icm_alloc's */ 1002 HERMON_ICM_FREE(HERMON_RDB); 1003 HERMON_ICM_FREE(HERMON_CMPT_QPC); 1004 return (status); 1005 } 1006 status = HERMON_ICM_ALLOC(HERMON_AUXC); 1007 if (status != DDI_SUCCESS) { /* undo icm_alloc's */ 1008 HERMON_ICM_FREE(HERMON_ALTC); 1009 HERMON_ICM_FREE(HERMON_RDB); 1010 HERMON_ICM_FREE(HERMON_CMPT_QPC); 1011 return (status); 1012 } 1013 break; 1014 case HERMON_SRQC: 1015 status = HERMON_ICM_ALLOC(HERMON_CMPT_SRQC); 1016 if (status != DDI_SUCCESS) { 1017 return (status); 1018 } 1019 break; 1020 case HERMON_CQC: 1021 status = HERMON_ICM_ALLOC(HERMON_CMPT_CQC); 1022 if (status != DDI_SUCCESS) { 1023 return (status); 1024 } 1025 break; 1026 case HERMON_EQC: 1027 status = HERMON_ICM_ALLOC(HERMON_CMPT_EQC); 1028 if (status != DDI_SUCCESS) { /* undo icm_alloc's */ 1029 return (status); 1030 } 1031 break; 1032 } 1033 1034 /* ensure existence of bitmap and dmainfo, sets "dma_info" */ 1035 hermon_bitmap(bitmap, dma_info, icm, index1); 1036 1037 /* Set up the DMA handle for allocation and mapping */ 1038 dma_info = icm->icm_dma[index1] + index2; 1039 _NOTE(NOW_INVISIBLE_TO_OTHER_THREADS(*dma_info)) 1040 dma_info->length = icm->span << icm->log_object_size; 1041 dma_info->icmaddr = icm->icm_baseaddr + 1042 (((index1 << icm->split_shift) + 1043 (index2 << icm->span_shift)) << icm->log_object_size); 1044 1045 if (hermon_verbose) { 1046 IBTF_DPRINTF_L2("hermon", "alloc DMA: " 1047 "rsrc (0x%x) index (%x, %x) " 1048 "icm_addr/len (%llx/%x) bitmap %p", type, index1, index2, 1049 (longlong_t)dma_info->icmaddr, dma_info->length, bitmap); 1050 } 1051 1052 /* Allocate and map memory for this span */ 1053 status = hermon_dma_alloc(state, dma_info, MAP_ICM); 1054 if (status != DDI_SUCCESS) { 1055 IBTF_DPRINTF_L2("hermon", "hermon_icm_alloc: DMA " 1056 "allocation failed, status 0x%x", status); 1057 switch (type) { 1058 case HERMON_QPC: 1059 HERMON_ICM_FREE(HERMON_AUXC); 1060 HERMON_ICM_FREE(HERMON_ALTC); 1061 HERMON_ICM_FREE(HERMON_RDB); 1062 HERMON_ICM_FREE(HERMON_CMPT_QPC); 1063 break; 1064 case HERMON_SRQC: 1065 HERMON_ICM_FREE(HERMON_CMPT_SRQC); 1066 break; 1067 case HERMON_CQC: 1068 HERMON_ICM_FREE(HERMON_CMPT_CQC); 1069 break; 1070 case HERMON_EQC: 1071 HERMON_ICM_FREE(HERMON_CMPT_EQC); 1072 break; 1073 } 1074 1075 return (DDI_FAILURE); 1076 } 1077 if (hermon_verbose) { 1078 IBTF_DPRINTF_L2("hermon", "hermon_icm_alloc: mapping ICM: " 1079 "rsrc_type (0x%x) index (0x%x, 0x%x) alloc length (0x%x) " 1080 "icm_addr (0x%lx)", type, index1, index2, dma_info->length, 1081 dma_info->icmaddr); 1082 } 1083 1084 /* Set the bit for this slot in the table bitmap */ 1085 HERMON_BMAP_BIT_SET(icm->icm_bitmap[index1], index2); 1086 1087 return (DDI_SUCCESS); 1088 } 1089 1090 /* 1091 * hermon_icm_free() 1092 * Context: Can be called from base context. 1093 * 1094 * ICM resources have been successfully returned from hermon_icm_alloc(). 1095 * Associated dma_info is no longer in use. Free the ICM backing memory. 1096 */ 1097 void 1098 hermon_icm_free(hermon_state_t *state, hermon_rsrc_type_t type, 1099 uint32_t index1, uint32_t index2) 1100 { 1101 hermon_icm_table_t *icm; 1102 hermon_dma_info_t *dma_info; 1103 int status; 1104 1105 icm = &state->hs_icm[type]; 1106 ASSERT(icm->icm_dma[index1][index2].icm_refcnt == 0); 1107 1108 if (hermon_verbose) { 1109 IBTF_DPRINTF_L2("hermon", "hermon_icm_free: rsrc_type (0x%x) " 1110 "index (0x%x, 0x%x)", type, index1, index2); 1111 } 1112 1113 dma_info = icm->icm_dma[index1] + index2; 1114 1115 /* The following only happens if attach() is failing. */ 1116 if (dma_info == NULL) 1117 return; 1118 1119 /* Unmap the ICM allocation, then free the backing DMA memory */ 1120 status = hermon_unmap_icm_cmd_post(state, dma_info); 1121 if (status != DDI_SUCCESS) { 1122 HERMON_WARNING(state, "UNMAP_ICM failure"); 1123 } 1124 hermon_dma_free(dma_info); 1125 1126 /* Clear the bit in the ICM table bitmap */ 1127 HERMON_BMAP_BIT_CLR(icm->icm_bitmap[index1], index2); 1128 1129 switch (type) { 1130 case HERMON_QPC: 1131 HERMON_ICM_FREE(HERMON_AUXC); 1132 HERMON_ICM_FREE(HERMON_ALTC); 1133 HERMON_ICM_FREE(HERMON_RDB); 1134 HERMON_ICM_FREE(HERMON_CMPT_QPC); 1135 break; 1136 case HERMON_SRQC: 1137 HERMON_ICM_FREE(HERMON_CMPT_SRQC); 1138 break; 1139 case HERMON_CQC: 1140 HERMON_ICM_FREE(HERMON_CMPT_CQC); 1141 break; 1142 case HERMON_EQC: 1143 HERMON_ICM_FREE(HERMON_CMPT_EQC); 1144 break; 1145 1146 } 1147 } 1148 1149 /* 1150 * hermon_drv_init() 1151 * Context: Only called from attach() path context 1152 */ 1153 /* ARGSUSED */ 1154 static int 1155 hermon_drv_init(hermon_state_t *state, dev_info_t *dip, int instance) 1156 { 1157 int status; 1158 1159 /* 1160 * Check and set the operational mode of the device. If the driver is 1161 * bound to the Hermon device in "maintenance mode", then this generally 1162 * means that either the device has been specifically jumpered to 1163 * start in this mode or the firmware boot process has failed to 1164 * successfully load either the primary or the secondary firmware 1165 * image. 1166 */ 1167 if (HERMON_IS_HCA_MODE(state->hs_dip)) { 1168 state->hs_operational_mode = HERMON_HCA_MODE; 1169 state->hs_cfg_profile_setting = HERMON_CFG_MEMFREE; 1170 1171 } else if (HERMON_IS_MAINTENANCE_MODE(state->hs_dip)) { 1172 HERMON_FMANOTE(state, HERMON_FMA_MAINT); 1173 state->hs_operational_mode = HERMON_MAINTENANCE_MODE; 1174 state->hs_fm_degraded_reason = HCA_FW_MISC; /* not fw reason */ 1175 return (DDI_FAILURE); 1176 1177 } else { 1178 state->hs_operational_mode = 0; /* invalid operational mode */ 1179 HERMON_FMANOTE(state, HERMON_FMA_PCIID); 1180 HERMON_WARNING(state, "unexpected device type detected"); 1181 return (DDI_FAILURE); 1182 } 1183 1184 /* 1185 * Initialize the Hermon hardware. 1186 * 1187 * Note: If this routine returns an error, it is often a reasonably 1188 * good indication that something Hermon firmware-related has caused 1189 * the failure or some HW related errors have caused the failure. 1190 * (also there are few possibilities that SW (e.g. SW resource 1191 * shortage) can cause the failure, but the majority case is due to 1192 * either a firmware related error or a HW related one) In order to 1193 * give the user an opportunity (if desired) to update or reflash 1194 * the Hermon firmware image, we set "hs_operational_mode" flag 1195 * (described above) to indicate that we wish to enter maintenance 1196 * mode in case of the firmware-related issue. 1197 */ 1198 status = hermon_hw_init(state); 1199 if (status != DDI_SUCCESS) { 1200 cmn_err(CE_NOTE, "hermon%d: error during attach: %s", instance, 1201 state->hs_attach_buf); 1202 return (DDI_FAILURE); 1203 } 1204 1205 /* 1206 * Now that the ISR has been setup, arm all the EQs for event 1207 * generation. 1208 */ 1209 1210 status = hermon_eq_arm_all(state); 1211 if (status != DDI_SUCCESS) { 1212 cmn_err(CE_NOTE, "EQ Arm All failed\n"); 1213 hermon_hw_fini(state, HERMON_DRV_CLEANUP_ALL); 1214 return (DDI_FAILURE); 1215 } 1216 1217 /* test interrupts and event queues */ 1218 status = hermon_nop_post(state, 0x0, 0x0); 1219 if (status != DDI_SUCCESS) { 1220 cmn_err(CE_NOTE, "Interrupts/EQs failed\n"); 1221 hermon_hw_fini(state, HERMON_DRV_CLEANUP_ALL); 1222 return (DDI_FAILURE); 1223 } 1224 1225 /* Initialize Hermon softstate */ 1226 status = hermon_soft_state_init(state); 1227 if (status != DDI_SUCCESS) { 1228 cmn_err(CE_NOTE, "Failed to init soft state\n"); 1229 hermon_hw_fini(state, HERMON_DRV_CLEANUP_ALL); 1230 return (DDI_FAILURE); 1231 } 1232 1233 return (DDI_SUCCESS); 1234 } 1235 1236 1237 /* 1238 * hermon_drv_fini() 1239 * Context: Only called from attach() and/or detach() path contexts 1240 */ 1241 static void 1242 hermon_drv_fini(hermon_state_t *state) 1243 { 1244 /* Cleanup Hermon softstate */ 1245 hermon_soft_state_fini(state); 1246 1247 /* Cleanup Hermon resources and shutdown hardware */ 1248 hermon_hw_fini(state, HERMON_DRV_CLEANUP_ALL); 1249 } 1250 1251 1252 /* 1253 * hermon_drv_fini2() 1254 * Context: Only called from attach() and/or detach() path contexts 1255 */ 1256 static void 1257 hermon_drv_fini2(hermon_state_t *state) 1258 { 1259 if (state->hs_fm_poll_thread) { 1260 ddi_periodic_delete(state->hs_fm_poll_thread); 1261 state->hs_fm_poll_thread = NULL; 1262 } 1263 1264 /* HERMON_DRV_CLEANUP_LEVEL1 */ 1265 if (state->hs_fm_cmdhdl) { 1266 hermon_regs_map_free(state, &state->hs_fm_cmdhdl); 1267 state->hs_fm_cmdhdl = NULL; 1268 } 1269 1270 if (state->hs_reg_cmdhdl) { 1271 ddi_regs_map_free(&state->hs_reg_cmdhdl); 1272 state->hs_reg_cmdhdl = NULL; 1273 } 1274 1275 /* HERMON_DRV_CLEANUP_LEVEL0 */ 1276 if (state->hs_msix_tbl_entries) { 1277 kmem_free(state->hs_msix_tbl_entries, 1278 state->hs_msix_tbl_size); 1279 state->hs_msix_tbl_entries = NULL; 1280 } 1281 1282 if (state->hs_msix_pba_entries) { 1283 kmem_free(state->hs_msix_pba_entries, 1284 state->hs_msix_pba_size); 1285 state->hs_msix_pba_entries = NULL; 1286 } 1287 1288 if (state->hs_fm_msix_tblhdl) { 1289 hermon_regs_map_free(state, &state->hs_fm_msix_tblhdl); 1290 state->hs_fm_msix_tblhdl = NULL; 1291 } 1292 1293 if (state->hs_reg_msix_tblhdl) { 1294 ddi_regs_map_free(&state->hs_reg_msix_tblhdl); 1295 state->hs_reg_msix_tblhdl = NULL; 1296 } 1297 1298 if (state->hs_fm_msix_pbahdl) { 1299 hermon_regs_map_free(state, &state->hs_fm_msix_pbahdl); 1300 state->hs_fm_msix_pbahdl = NULL; 1301 } 1302 1303 if (state->hs_reg_msix_pbahdl) { 1304 ddi_regs_map_free(&state->hs_reg_msix_pbahdl); 1305 state->hs_reg_msix_pbahdl = NULL; 1306 } 1307 1308 if (state->hs_fm_pcihdl) { 1309 hermon_pci_config_teardown(state, &state->hs_fm_pcihdl); 1310 state->hs_fm_pcihdl = NULL; 1311 } 1312 1313 if (state->hs_reg_pcihdl) { 1314 pci_config_teardown(&state->hs_reg_pcihdl); 1315 state->hs_reg_pcihdl = NULL; 1316 } 1317 } 1318 1319 1320 /* 1321 * hermon_isr_init() 1322 * Context: Only called from attach() path context 1323 */ 1324 static int 1325 hermon_isr_init(hermon_state_t *state) 1326 { 1327 int status; 1328 int intr; 1329 1330 for (intr = 0; intr < state->hs_intrmsi_allocd; intr++) { 1331 1332 /* 1333 * Add a handler for the interrupt or MSI 1334 */ 1335 status = ddi_intr_add_handler(state->hs_intrmsi_hdl[intr], 1336 hermon_isr, (caddr_t)state, (void *)(uintptr_t)intr); 1337 if (status != DDI_SUCCESS) { 1338 return (DDI_FAILURE); 1339 } 1340 1341 /* 1342 * Enable the software interrupt. Note: depending on the value 1343 * returned in the capability flag, we have to call either 1344 * ddi_intr_block_enable() or ddi_intr_enable(). 1345 */ 1346 if (state->hs_intrmsi_cap & DDI_INTR_FLAG_BLOCK) { 1347 status = ddi_intr_block_enable( 1348 &state->hs_intrmsi_hdl[intr], 1); 1349 if (status != DDI_SUCCESS) { 1350 return (DDI_FAILURE); 1351 } 1352 } else { 1353 status = ddi_intr_enable(state->hs_intrmsi_hdl[intr]); 1354 if (status != DDI_SUCCESS) { 1355 return (DDI_FAILURE); 1356 } 1357 } 1358 } 1359 1360 /* 1361 * Now that the ISR has been enabled, defer arm_all EQs for event 1362 * generation until later, in case MSIX is enabled 1363 */ 1364 return (DDI_SUCCESS); 1365 } 1366 1367 1368 /* 1369 * hermon_isr_fini() 1370 * Context: Only called from attach() and/or detach() path contexts 1371 */ 1372 static void 1373 hermon_isr_fini(hermon_state_t *state) 1374 { 1375 int intr; 1376 1377 for (intr = 0; intr < state->hs_intrmsi_allocd; intr++) { 1378 /* Disable the software interrupt */ 1379 if (state->hs_intrmsi_cap & DDI_INTR_FLAG_BLOCK) { 1380 (void) ddi_intr_block_disable( 1381 &state->hs_intrmsi_hdl[intr], 1); 1382 } else { 1383 (void) ddi_intr_disable(state->hs_intrmsi_hdl[intr]); 1384 } 1385 1386 /* 1387 * Remove the software handler for the interrupt or MSI 1388 */ 1389 (void) ddi_intr_remove_handler(state->hs_intrmsi_hdl[intr]); 1390 } 1391 } 1392 1393 1394 /* 1395 * Sum of ICM configured values: 1396 * cMPT, dMPT, MTT, QPC, SRQC, RDB, CQC, ALTC, AUXC, EQC, MCG 1397 * 1398 */ 1399 static uint64_t 1400 hermon_size_icm(hermon_state_t *state) 1401 { 1402 hermon_hw_querydevlim_t *devlim; 1403 hermon_cfg_profile_t *cfg; 1404 uint64_t num_cmpts, num_dmpts, num_mtts; 1405 uint64_t num_qpcs, num_srqc, num_rdbs; 1406 #ifndef HERMON_FW_WORKAROUND 1407 uint64_t num_auxc; 1408 #endif 1409 uint64_t num_cqcs, num_altc; 1410 uint64_t num_eqcs, num_mcgs; 1411 uint64_t size; 1412 1413 devlim = &state->hs_devlim; 1414 cfg = state->hs_cfg_profile; 1415 /* number of respective entries */ 1416 num_cmpts = (uint64_t)0x1 << cfg->cp_log_num_cmpt; 1417 num_mtts = (uint64_t)0x1 << cfg->cp_log_num_mtt; 1418 num_dmpts = (uint64_t)0x1 << cfg->cp_log_num_dmpt; 1419 num_qpcs = (uint64_t)0x1 << cfg->cp_log_num_qp; 1420 num_srqc = (uint64_t)0x1 << cfg->cp_log_num_srq; 1421 num_rdbs = (uint64_t)0x1 << cfg->cp_log_num_rdb; 1422 num_cqcs = (uint64_t)0x1 << cfg->cp_log_num_cq; 1423 num_altc = (uint64_t)0x1 << cfg->cp_log_num_qp; 1424 #ifndef HERMON_FW_WORKAROUND 1425 num_auxc = (uint64_t)0x1 << cfg->cp_log_num_qp; 1426 #endif 1427 num_eqcs = (uint64_t)0x1 << cfg->cp_log_num_eq; 1428 num_mcgs = (uint64_t)0x1 << cfg->cp_log_num_mcg; 1429 1430 size = 1431 num_cmpts * devlim->cmpt_entry_sz + 1432 num_dmpts * devlim->dmpt_entry_sz + 1433 num_mtts * devlim->mtt_entry_sz + 1434 num_qpcs * devlim->qpc_entry_sz + 1435 num_srqc * devlim->srq_entry_sz + 1436 num_rdbs * devlim->rdmardc_entry_sz + 1437 num_cqcs * devlim->cqc_entry_sz + 1438 num_altc * devlim->altc_entry_sz + 1439 #ifdef HERMON_FW_WORKAROUND 1440 0x80000000ull + 1441 #else 1442 num_auxc * devlim->aux_entry_sz + 1443 #endif 1444 num_eqcs * devlim->eqc_entry_sz + 1445 num_mcgs * HERMON_MCGMEM_SZ(state); 1446 return (size); 1447 } 1448 1449 1450 /* 1451 * hermon_hw_init() 1452 * Context: Only called from attach() path context 1453 */ 1454 static int 1455 hermon_hw_init(hermon_state_t *state) 1456 { 1457 hermon_drv_cleanup_level_t cleanup; 1458 sm_nodeinfo_t nodeinfo; 1459 uint64_t clr_intr_offset; 1460 int status; 1461 uint32_t fw_size; /* in page */ 1462 uint64_t offset; 1463 1464 /* This is where driver initialization begins */ 1465 cleanup = HERMON_DRV_CLEANUP_LEVEL0; 1466 1467 /* Setup device access attributes */ 1468 state->hs_reg_accattr.devacc_attr_version = DDI_DEVICE_ATTR_V0; 1469 state->hs_reg_accattr.devacc_attr_endian_flags = DDI_STRUCTURE_BE_ACC; 1470 state->hs_reg_accattr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; 1471 state->hs_reg_accattr.devacc_attr_access = DDI_DEFAULT_ACC; 1472 1473 /* Setup fma-protected access attributes */ 1474 state->hs_fm_accattr.devacc_attr_version = 1475 hermon_devacc_attr_version(state); 1476 state->hs_fm_accattr.devacc_attr_endian_flags = DDI_STRUCTURE_BE_ACC; 1477 state->hs_fm_accattr.devacc_attr_dataorder = DDI_STRICTORDER_ACC; 1478 /* set acc err protection type */ 1479 state->hs_fm_accattr.devacc_attr_access = 1480 hermon_devacc_attr_access(state); 1481 1482 /* Setup for PCI config read/write of HCA device */ 1483 status = hermon_pci_config_setup(state, &state->hs_fm_pcihdl); 1484 if (status != DDI_SUCCESS) { 1485 hermon_hw_fini(state, cleanup); 1486 HERMON_ATTACH_MSG(state->hs_attach_buf, 1487 "hw_init_PCI_config_space_regmap_fail"); 1488 /* This case is not the degraded one */ 1489 return (DDI_FAILURE); 1490 } 1491 1492 /* Map PCI config space and MSI-X tables/pba */ 1493 hermon_set_msix_info(state); 1494 1495 /* Map in Hermon registers (CMD, UAR, MSIX) and setup offsets */ 1496 status = hermon_regs_map_setup(state, HERMON_CMD_BAR, 1497 &state->hs_reg_cmd_baseaddr, 0, 0, &state->hs_fm_accattr, 1498 &state->hs_fm_cmdhdl); 1499 if (status != DDI_SUCCESS) { 1500 hermon_hw_fini(state, cleanup); 1501 HERMON_ATTACH_MSG(state->hs_attach_buf, 1502 "hw_init_CMD_BAR_regmap_fail"); 1503 /* This case is not the degraded one */ 1504 return (DDI_FAILURE); 1505 } 1506 1507 cleanup = HERMON_DRV_CLEANUP_LEVEL1; 1508 /* 1509 * We defer UAR-BAR mapping until later. Need to know if 1510 * blueflame mapping is to be done, and don't know that until after 1511 * we get the dev_caps, so do it right after that 1512 */ 1513 1514 /* 1515 * There is a third BAR defined for Hermon - it is for MSIX 1516 * 1517 * Will need to explore it's possible need/use w/ Mellanox 1518 * [es] Temporary mapping maybe 1519 */ 1520 1521 #ifdef HERMON_SUPPORTS_MSIX_BAR 1522 status = ddi_regs_map_setup(state->hs_dip, HERMON_MSIX_BAR, 1523 &state->hs_reg_msi_baseaddr, 0, 0, &state->hs_reg_accattr, 1524 &state->hs_reg_msihdl); 1525 if (status != DDI_SUCCESS) { 1526 hermon_hw_fini(state, cleanup); 1527 HERMON_ATTACH_MSG(state->hs_attach_buf, 1528 "hw_init_MSIX_BAR_regmap_fail"); 1529 /* This case is not the degraded one */ 1530 return (DDI_FAILURE); 1531 } 1532 #endif 1533 1534 cleanup = HERMON_DRV_CLEANUP_LEVEL2; 1535 1536 /* 1537 * Save interesting registers away. The offsets of the first two 1538 * here (HCR and sw_reset) are detailed in the PRM, the others are 1539 * derived from values in the QUERY_FW output, so we'll save them 1540 * off later. 1541 */ 1542 /* Host Command Register (HCR) */ 1543 state->hs_cmd_regs.hcr = (hermon_hw_hcr_t *) 1544 ((uintptr_t)state->hs_reg_cmd_baseaddr + HERMON_CMD_HCR_OFFSET); 1545 state->hs_cmd_toggle = 0; /* initialize it for use */ 1546 1547 /* Software Reset register (sw_reset) and semaphore */ 1548 state->hs_cmd_regs.sw_reset = (uint32_t *) 1549 ((uintptr_t)state->hs_reg_cmd_baseaddr + 1550 HERMON_CMD_SW_RESET_OFFSET); 1551 state->hs_cmd_regs.sw_semaphore = (uint32_t *) 1552 ((uintptr_t)state->hs_reg_cmd_baseaddr + 1553 HERMON_CMD_SW_SEMAPHORE_OFFSET); 1554 1555 /* Retrieve PCI device, vendor and rev IDs */ 1556 state->hs_vendor_id = HERMON_GET_VENDOR_ID(state->hs_dip); 1557 state->hs_device_id = HERMON_GET_DEVICE_ID(state->hs_dip); 1558 state->hs_revision_id = HERMON_GET_REVISION_ID(state->hs_dip); 1559 1560 /* make sure init'd before we start filling things in */ 1561 bzero(&state->hs_hcaparams, sizeof (struct hermon_hw_initqueryhca_s)); 1562 1563 /* Initialize the Phase1 configuration profile */ 1564 status = hermon_cfg_profile_init_phase1(state); 1565 if (status != DDI_SUCCESS) { 1566 hermon_hw_fini(state, cleanup); 1567 HERMON_ATTACH_MSG(state->hs_attach_buf, 1568 "hw_init_cfginit1_fail"); 1569 /* This case is not the degraded one */ 1570 return (DDI_FAILURE); 1571 } 1572 cleanup = HERMON_DRV_CLEANUP_LEVEL3; 1573 1574 /* Do a software reset of the adapter to ensure proper state */ 1575 status = hermon_sw_reset(state); 1576 if (status != HERMON_CMD_SUCCESS) { 1577 hermon_hw_fini(state, cleanup); 1578 HERMON_ATTACH_MSG(state->hs_attach_buf, 1579 "hw_init_sw_reset_fail"); 1580 /* This case is not the degraded one */ 1581 return (DDI_FAILURE); 1582 } 1583 1584 /* Initialize mailboxes */ 1585 status = hermon_rsrc_init_phase1(state); 1586 if (status != DDI_SUCCESS) { 1587 hermon_hw_fini(state, cleanup); 1588 HERMON_ATTACH_MSG(state->hs_attach_buf, 1589 "hw_init_rsrcinit1_fail"); 1590 /* This case is not the degraded one */ 1591 return (DDI_FAILURE); 1592 } 1593 cleanup = HERMON_DRV_CLEANUP_LEVEL4; 1594 1595 /* Post QUERY_FW */ 1596 status = hermon_cmn_query_cmd_post(state, QUERY_FW, 0, 0, &state->hs_fw, 1597 sizeof (hermon_hw_queryfw_t), HERMON_CMD_NOSLEEP_SPIN); 1598 if (status != HERMON_CMD_SUCCESS) { 1599 cmn_err(CE_NOTE, "QUERY_FW command failed: %08x\n", status); 1600 hermon_hw_fini(state, cleanup); 1601 HERMON_ATTACH_MSG(state->hs_attach_buf, 1602 "hw_init_query_fw_cmd_fail"); 1603 /* This case is not the degraded one */ 1604 return (DDI_FAILURE); 1605 } 1606 1607 /* Validate what/that HERMON FW version is appropriate */ 1608 1609 status = hermon_fw_version_check(state); 1610 if (status != DDI_SUCCESS) { 1611 HERMON_FMANOTE(state, HERMON_FMA_FWVER); 1612 if (state->hs_operational_mode == HERMON_HCA_MODE) { 1613 cmn_err(CE_CONT, "Unsupported Hermon FW version: " 1614 "expected: %04d.%04d.%04d, " 1615 "actual: %04d.%04d.%04d\n", 1616 HERMON_FW_VER_MAJOR, 1617 HERMON_FW_VER_MINOR, 1618 HERMON_FW_VER_SUBMINOR, 1619 state->hs_fw.fw_rev_major, 1620 state->hs_fw.fw_rev_minor, 1621 state->hs_fw.fw_rev_subminor); 1622 } else { 1623 cmn_err(CE_CONT, "Unsupported FW version: " 1624 "%04d.%04d.%04d\n", 1625 state->hs_fw.fw_rev_major, 1626 state->hs_fw.fw_rev_minor, 1627 state->hs_fw.fw_rev_subminor); 1628 } 1629 state->hs_operational_mode = HERMON_MAINTENANCE_MODE; 1630 state->hs_fm_degraded_reason = HCA_FW_MISMATCH; 1631 hermon_hw_fini(state, cleanup); 1632 HERMON_ATTACH_MSG(state->hs_attach_buf, 1633 "hw_init_checkfwver_fail"); 1634 /* This case is the degraded one */ 1635 return (HERMON_CMD_BAD_NVMEM); 1636 } 1637 1638 /* 1639 * Save off the rest of the interesting registers that we'll be using. 1640 * Setup the offsets for the other registers. 1641 */ 1642 1643 /* 1644 * Hermon does the intr_offset from the BAR - technically should get the 1645 * BAR info from the response, but PRM says it's from BAR0-1, which is 1646 * for us the CMD BAR 1647 */ 1648 1649 clr_intr_offset = state->hs_fw.clr_intr_offs & HERMON_CMD_OFFSET_MASK; 1650 1651 /* Save Clear Interrupt address */ 1652 state->hs_cmd_regs.clr_intr = (uint64_t *) 1653 (uintptr_t)(state->hs_reg_cmd_baseaddr + clr_intr_offset); 1654 1655 /* 1656 * Set the error buffer also into the structure - used in hermon_event.c 1657 * to check for internal error on the HCA, not reported in eqe or 1658 * (necessarily) by interrupt 1659 */ 1660 state->hs_cmd_regs.fw_err_buf = (uint32_t *)(uintptr_t) 1661 (state->hs_reg_cmd_baseaddr + state->hs_fw.error_buf_addr); 1662 1663 /* 1664 * Invoke a polling thread to check the error buffer periodically. 1665 */ 1666 if (!hermon_no_inter_err_chk) { 1667 state->hs_fm_poll_thread = ddi_periodic_add( 1668 hermon_inter_err_chk, (void *)state, FM_POLL_INTERVAL, 1669 DDI_IPL_0); 1670 } 1671 1672 cleanup = HERMON_DRV_CLEANUP_LEVEL5; 1673 1674 /* 1675 * Allocate, map, and run the HCA Firmware. 1676 */ 1677 1678 /* Allocate memory for the firmware to load into and map it */ 1679 1680 /* get next higher power of 2 */ 1681 fw_size = 1 << highbit(state->hs_fw.fw_pages); 1682 state->hs_fw_dma.length = fw_size << HERMON_PAGESHIFT; 1683 status = hermon_dma_alloc(state, &state->hs_fw_dma, MAP_FA); 1684 if (status != DDI_SUCCESS) { 1685 cmn_err(CE_NOTE, "FW alloc failed\n"); 1686 hermon_hw_fini(state, cleanup); 1687 HERMON_ATTACH_MSG(state->hs_attach_buf, 1688 "hw_init_dma_alloc_fw_fail"); 1689 /* This case is not the degraded one */ 1690 return (DDI_FAILURE); 1691 } 1692 1693 cleanup = HERMON_DRV_CLEANUP_LEVEL6; 1694 1695 /* Invoke the RUN_FW cmd to run the firmware */ 1696 status = hermon_run_fw_cmd_post(state); 1697 if (status != DDI_SUCCESS) { 1698 cmn_err(CE_NOTE, "RUN_FW command failed: 0x%08x\n", status); 1699 if (status == HERMON_CMD_BAD_NVMEM) { 1700 state->hs_operational_mode = HERMON_MAINTENANCE_MODE; 1701 state->hs_fm_degraded_reason = HCA_FW_CORRUPT; 1702 } 1703 hermon_hw_fini(state, cleanup); 1704 HERMON_ATTACH_MSG(state->hs_attach_buf, "hw_init_run_fw_fail"); 1705 /* 1706 * If the status is HERMON_CMD_BAD_NVMEM, it's likely the 1707 * firmware is corrupted, so the mode falls into the 1708 * maintenance mode. 1709 */ 1710 return (status == HERMON_CMD_BAD_NVMEM ? HERMON_CMD_BAD_NVMEM : 1711 DDI_FAILURE); 1712 } 1713 1714 1715 /* 1716 * QUERY DEVICE LIMITS/CAPABILITIES 1717 * NOTE - in Hermon, the command is changed to QUERY_DEV_CAP, 1718 * but for familiarity we have kept the structure name the 1719 * same as Tavor/Arbel 1720 */ 1721 1722 status = hermon_cmn_query_cmd_post(state, QUERY_DEV_CAP, 0, 0, 1723 &state->hs_devlim, sizeof (hermon_hw_querydevlim_t), 1724 HERMON_CMD_NOSLEEP_SPIN); 1725 if (status != HERMON_CMD_SUCCESS) { 1726 cmn_err(CE_NOTE, "QUERY_DEV_CAP command failed: 0x%08x\n", 1727 status); 1728 hermon_hw_fini(state, cleanup); 1729 HERMON_ATTACH_MSG(state->hs_attach_buf, "hw_init_devcap_fail"); 1730 /* This case is not the degraded one */ 1731 return (DDI_FAILURE); 1732 } 1733 1734 state->hs_devlim.num_rsvd_eq = max(state->hs_devlim.num_rsvd_eq, 1735 (4 * state->hs_devlim.num_rsvd_uar)); /* lesser of resvd's */ 1736 1737 /* now we have enough info to map in the UAR BAR */ 1738 /* 1739 * First, we figure out how to map the BAR for UAR - use only half if 1740 * BlueFlame is enabled - in that case the mapped length is 1/2 the 1741 * log_max_uar_sz (max__uar - 1) * 1MB ( +20). 1742 */ 1743 1744 if (state->hs_devlim.blu_flm) { /* Blue Flame Enabled */ 1745 offset = (uint64_t)1 << (state->hs_devlim.log_max_uar_sz + 20); 1746 } else { 1747 offset = 0; /* a zero length means map the whole thing */ 1748 } 1749 status = hermon_regs_map_setup(state, HERMON_UAR_BAR, 1750 &state->hs_reg_uar_baseaddr, 0, offset, &state->hs_fm_accattr, 1751 &state->hs_fm_uarhdl); 1752 if (status != DDI_SUCCESS) { 1753 HERMON_ATTACH_MSG(state->hs_attach_buf, "UAR BAR mapping"); 1754 /* This case is not the degraded one */ 1755 return (DDI_FAILURE); 1756 } 1757 1758 /* and if BlueFlame is enabled, map the other half there */ 1759 if (state->hs_devlim.blu_flm) { /* Blue Flame Enabled */ 1760 offset = (uint64_t)1 << (state->hs_devlim.log_max_uar_sz + 20); 1761 status = ddi_regs_map_setup(state->hs_dip, HERMON_UAR_BAR, 1762 &state->hs_reg_bf_baseaddr, offset, offset, 1763 &state->hs_reg_accattr, &state->hs_reg_bfhdl); 1764 if (status != DDI_SUCCESS) { 1765 HERMON_ATTACH_MSG(state->hs_attach_buf, 1766 "BlueFlame BAR mapping"); 1767 /* This case is not the degraded one */ 1768 return (DDI_FAILURE); 1769 } 1770 /* This will be used in hw_fini if we fail to init. */ 1771 state->hs_bf_offset = offset; 1772 } 1773 cleanup = HERMON_DRV_CLEANUP_LEVEL7; 1774 1775 /* Hermon has a couple of things needed for phase 2 in query port */ 1776 1777 status = hermon_cmn_query_cmd_post(state, QUERY_PORT, 0, 0x01, 1778 &state->hs_queryport, sizeof (hermon_hw_query_port_t), 1779 HERMON_CMD_NOSLEEP_SPIN); 1780 if (status != HERMON_CMD_SUCCESS) { 1781 cmn_err(CE_NOTE, "QUERY_PORT command failed: 0x%08x\n", 1782 status); 1783 hermon_hw_fini(state, cleanup); 1784 HERMON_ATTACH_MSG(state->hs_attach_buf, 1785 "hw_init_queryport_fail"); 1786 /* This case is not the degraded one */ 1787 return (DDI_FAILURE); 1788 } 1789 1790 /* Initialize the Phase2 Hermon configuration profile */ 1791 status = hermon_cfg_profile_init_phase2(state); 1792 if (status != DDI_SUCCESS) { 1793 cmn_err(CE_NOTE, "CFG phase 2 failed: 0x%08x\n", status); 1794 hermon_hw_fini(state, cleanup); 1795 HERMON_ATTACH_MSG(state->hs_attach_buf, 1796 "hw_init_cfginit2_fail"); 1797 /* This case is not the degraded one */ 1798 return (DDI_FAILURE); 1799 } 1800 1801 /* Determine and set the ICM size */ 1802 state->hs_icm_sz = hermon_size_icm(state); 1803 status = hermon_set_icm_size_cmd_post(state); 1804 if (status != DDI_SUCCESS) { 1805 cmn_err(CE_NOTE, "Hermon: SET_ICM_SIZE cmd failed: 0x%08x\n", 1806 status); 1807 hermon_hw_fini(state, cleanup); 1808 HERMON_ATTACH_MSG(state->hs_attach_buf, 1809 "hw_init_seticmsz_fail"); 1810 /* This case is not the degraded one */ 1811 return (DDI_FAILURE); 1812 } 1813 /* alloc icm aux physical memory and map it */ 1814 1815 state->hs_icma_dma.length = 1 << highbit(state->hs_icma_sz); 1816 1817 status = hermon_dma_alloc(state, &state->hs_icma_dma, MAP_ICM_AUX); 1818 if (status != DDI_SUCCESS) { 1819 cmn_err(CE_NOTE, "failed to alloc (0x%llx) bytes for ICMA\n", 1820 (longlong_t)state->hs_icma_dma.length); 1821 hermon_hw_fini(state, cleanup); 1822 HERMON_ATTACH_MSG(state->hs_attach_buf, 1823 "hw_init_dma_alloc_icm_aux_fail"); 1824 /* This case is not the degraded one */ 1825 return (DDI_FAILURE); 1826 } 1827 cleanup = HERMON_DRV_CLEANUP_LEVEL8; 1828 1829 cleanup = HERMON_DRV_CLEANUP_LEVEL9; 1830 1831 /* Allocate an array of structures to house the ICM tables */ 1832 state->hs_icm = kmem_zalloc(HERMON_NUM_ICM_RESOURCES * 1833 sizeof (hermon_icm_table_t), KM_SLEEP); 1834 1835 /* Set up the ICM address space and the INIT_HCA command input */ 1836 status = hermon_icm_config_setup(state, &state->hs_hcaparams); 1837 if (status != HERMON_CMD_SUCCESS) { 1838 cmn_err(CE_NOTE, "ICM configuration failed\n"); 1839 hermon_hw_fini(state, cleanup); 1840 HERMON_ATTACH_MSG(state->hs_attach_buf, 1841 "hw_init_icm_config_setup_fail"); 1842 /* This case is not the degraded one */ 1843 return (DDI_FAILURE); 1844 } 1845 cleanup = HERMON_DRV_CLEANUP_LEVEL10; 1846 1847 /* Initialize the adapter with the INIT_HCA cmd */ 1848 status = hermon_init_hca_cmd_post(state, &state->hs_hcaparams, 1849 HERMON_CMD_NOSLEEP_SPIN); 1850 if (status != HERMON_CMD_SUCCESS) { 1851 cmn_err(CE_NOTE, "INIT_HCA command failed: %08x\n", status); 1852 hermon_hw_fini(state, cleanup); 1853 HERMON_ATTACH_MSG(state->hs_attach_buf, "hw_init_hca_fail"); 1854 /* This case is not the degraded one */ 1855 return (DDI_FAILURE); 1856 } 1857 cleanup = HERMON_DRV_CLEANUP_LEVEL11; 1858 1859 /* Enter the second phase of init for Hermon configuration/resources */ 1860 status = hermon_rsrc_init_phase2(state); 1861 if (status != DDI_SUCCESS) { 1862 hermon_hw_fini(state, cleanup); 1863 HERMON_ATTACH_MSG(state->hs_attach_buf, 1864 "hw_init_rsrcinit2_fail"); 1865 /* This case is not the degraded one */ 1866 return (DDI_FAILURE); 1867 } 1868 cleanup = HERMON_DRV_CLEANUP_LEVEL12; 1869 1870 /* Query the adapter via QUERY_ADAPTER */ 1871 status = hermon_cmn_query_cmd_post(state, QUERY_ADAPTER, 0, 0, 1872 &state->hs_adapter, sizeof (hermon_hw_queryadapter_t), 1873 HERMON_CMD_NOSLEEP_SPIN); 1874 if (status != HERMON_CMD_SUCCESS) { 1875 cmn_err(CE_NOTE, "Hermon: QUERY_ADAPTER command failed: %08x\n", 1876 status); 1877 hermon_hw_fini(state, cleanup); 1878 HERMON_ATTACH_MSG(state->hs_attach_buf, 1879 "hw_init_query_adapter_fail"); 1880 /* This case is not the degraded one */ 1881 return (DDI_FAILURE); 1882 } 1883 1884 /* Allocate protection domain (PD) for Hermon internal use */ 1885 status = hermon_pd_alloc(state, &state->hs_pdhdl_internal, 1886 HERMON_SLEEP); 1887 if (status != DDI_SUCCESS) { 1888 cmn_err(CE_NOTE, "failed to alloc internal PD\n"); 1889 hermon_hw_fini(state, cleanup); 1890 HERMON_ATTACH_MSG(state->hs_attach_buf, 1891 "hw_init_internal_pd_alloc_fail"); 1892 /* This case is not the degraded one */ 1893 return (DDI_FAILURE); 1894 } 1895 cleanup = HERMON_DRV_CLEANUP_LEVEL13; 1896 1897 /* Setup UAR page for kernel use */ 1898 status = hermon_internal_uarpg_init(state); 1899 if (status != DDI_SUCCESS) { 1900 cmn_err(CE_NOTE, "failed to setup internal UAR\n"); 1901 hermon_hw_fini(state, cleanup); 1902 HERMON_ATTACH_MSG(state->hs_attach_buf, 1903 "hw_init_internal_uarpg_alloc_fail"); 1904 /* This case is not the degraded one */ 1905 return (DDI_FAILURE); 1906 } 1907 cleanup = HERMON_DRV_CLEANUP_LEVEL14; 1908 1909 /* Query and initialize the Hermon interrupt/MSI information */ 1910 status = hermon_intr_or_msi_init(state); 1911 if (status != DDI_SUCCESS) { 1912 cmn_err(CE_NOTE, "failed to setup INTR/MSI\n"); 1913 hermon_hw_fini(state, cleanup); 1914 HERMON_ATTACH_MSG(state->hs_attach_buf, 1915 "hw_init_intr_or_msi_init_fail"); 1916 /* This case is not the degraded one */ 1917 return (DDI_FAILURE); 1918 } 1919 cleanup = HERMON_DRV_CLEANUP_LEVEL15; 1920 1921 status = hermon_isr_init(state); /* set up the isr */ 1922 if (status != DDI_SUCCESS) { 1923 cmn_err(CE_NOTE, "failed to init isr\n"); 1924 hermon_hw_fini(state, cleanup); 1925 HERMON_ATTACH_MSG(state->hs_attach_buf, 1926 "hw_init_isrinit_fail"); 1927 /* This case is not the degraded one */ 1928 return (DDI_FAILURE); 1929 } 1930 cleanup = HERMON_DRV_CLEANUP_LEVEL16; 1931 1932 /* Setup the event queues */ 1933 status = hermon_eq_init_all(state); 1934 if (status != DDI_SUCCESS) { 1935 cmn_err(CE_NOTE, "failed to init EQs\n"); 1936 hermon_hw_fini(state, cleanup); 1937 HERMON_ATTACH_MSG(state->hs_attach_buf, 1938 "hw_init_eqinitall_fail"); 1939 /* This case is not the degraded one */ 1940 return (DDI_FAILURE); 1941 } 1942 cleanup = HERMON_DRV_CLEANUP_LEVEL17; 1943 1944 1945 1946 /* Reserve contexts for QP0 and QP1 */ 1947 status = hermon_special_qp_contexts_reserve(state); 1948 if (status != DDI_SUCCESS) { 1949 cmn_err(CE_NOTE, "failed to init special QPs\n"); 1950 hermon_hw_fini(state, cleanup); 1951 HERMON_ATTACH_MSG(state->hs_attach_buf, 1952 "hw_init_rsrv_sqp_fail"); 1953 /* This case is not the degraded one */ 1954 return (DDI_FAILURE); 1955 } 1956 cleanup = HERMON_DRV_CLEANUP_LEVEL18; 1957 1958 /* Initialize for multicast group handling */ 1959 status = hermon_mcg_init(state); 1960 if (status != DDI_SUCCESS) { 1961 cmn_err(CE_NOTE, "failed to init multicast\n"); 1962 hermon_hw_fini(state, cleanup); 1963 HERMON_ATTACH_MSG(state->hs_attach_buf, 1964 "hw_init_mcg_init_fail"); 1965 /* This case is not the degraded one */ 1966 return (DDI_FAILURE); 1967 } 1968 cleanup = HERMON_DRV_CLEANUP_LEVEL19; 1969 1970 /* Initialize the Hermon IB port(s) */ 1971 status = hermon_hca_port_init(state); 1972 if (status != DDI_SUCCESS) { 1973 cmn_err(CE_NOTE, "failed to init HCA Port\n"); 1974 hermon_hw_fini(state, cleanup); 1975 HERMON_ATTACH_MSG(state->hs_attach_buf, 1976 "hw_init_hca_port_init_fail"); 1977 /* This case is not the degraded one */ 1978 return (DDI_FAILURE); 1979 } 1980 1981 cleanup = HERMON_DRV_CLEANUP_ALL; 1982 1983 /* Determine NodeGUID and SystemImageGUID */ 1984 status = hermon_getnodeinfo_cmd_post(state, HERMON_CMD_NOSLEEP_SPIN, 1985 &nodeinfo); 1986 if (status != HERMON_CMD_SUCCESS) { 1987 cmn_err(CE_NOTE, "GetNodeInfo command failed: %08x\n", status); 1988 hermon_hw_fini(state, cleanup); 1989 HERMON_ATTACH_MSG(state->hs_attach_buf, 1990 "hw_init_getnodeinfo_cmd_fail"); 1991 /* This case is not the degraded one */ 1992 return (DDI_FAILURE); 1993 } 1994 1995 /* 1996 * If the NodeGUID value was set in OBP properties, then we use that 1997 * value. But we still print a message if the value we queried from 1998 * firmware does not match this value. 1999 * 2000 * Otherwise if OBP value is not set then we use the value from 2001 * firmware unconditionally. 2002 */ 2003 if (state->hs_cfg_profile->cp_nodeguid) { 2004 state->hs_nodeguid = state->hs_cfg_profile->cp_nodeguid; 2005 } else { 2006 state->hs_nodeguid = nodeinfo.NodeGUID; 2007 } 2008 2009 if (state->hs_nodeguid != nodeinfo.NodeGUID) { 2010 cmn_err(CE_NOTE, "!NodeGUID value queried from firmware " 2011 "does not match value set by device property"); 2012 } 2013 2014 /* 2015 * If the SystemImageGUID value was set in OBP properties, then we use 2016 * that value. But we still print a message if the value we queried 2017 * from firmware does not match this value. 2018 * 2019 * Otherwise if OBP value is not set then we use the value from 2020 * firmware unconditionally. 2021 */ 2022 if (state->hs_cfg_profile->cp_sysimgguid) { 2023 state->hs_sysimgguid = state->hs_cfg_profile->cp_sysimgguid; 2024 } else { 2025 state->hs_sysimgguid = nodeinfo.SystemImageGUID; 2026 } 2027 2028 if (state->hs_sysimgguid != nodeinfo.SystemImageGUID) { 2029 cmn_err(CE_NOTE, "!SystemImageGUID value queried from firmware " 2030 "does not match value set by device property"); 2031 } 2032 2033 /* Get NodeDescription */ 2034 status = hermon_getnodedesc_cmd_post(state, HERMON_CMD_NOSLEEP_SPIN, 2035 (sm_nodedesc_t *)&state->hs_nodedesc); 2036 if (status != HERMON_CMD_SUCCESS) { 2037 cmn_err(CE_CONT, "GetNodeDesc command failed: %08x\n", status); 2038 hermon_hw_fini(state, cleanup); 2039 HERMON_ATTACH_MSG(state->hs_attach_buf, 2040 "hw_init_getnodedesc_cmd_fail"); 2041 /* This case is not the degraded one */ 2042 return (DDI_FAILURE); 2043 } 2044 2045 return (DDI_SUCCESS); 2046 } 2047 2048 2049 /* 2050 * hermon_hw_fini() 2051 * Context: Only called from attach() and/or detach() path contexts 2052 */ 2053 static void 2054 hermon_hw_fini(hermon_state_t *state, hermon_drv_cleanup_level_t cleanup) 2055 { 2056 uint_t num_ports; 2057 int i, status; 2058 2059 2060 /* 2061 * JBDB - We might not want to run these returns in all cases of 2062 * Bad News. We should still attempt to free all of the DMA memory 2063 * resources... This needs to be worked last, after all allocations 2064 * are implemented. For now, and possibly for later, this works. 2065 */ 2066 2067 switch (cleanup) { 2068 /* 2069 * If we add more driver initialization steps that should be cleaned 2070 * up here, we need to ensure that HERMON_DRV_CLEANUP_ALL is still the 2071 * first entry (i.e. corresponds to the last init step). 2072 */ 2073 case HERMON_DRV_CLEANUP_ALL: 2074 /* Shutdown the Hermon IB port(s) */ 2075 num_ports = state->hs_cfg_profile->cp_num_ports; 2076 (void) hermon_hca_ports_shutdown(state, num_ports); 2077 /* FALLTHROUGH */ 2078 2079 case HERMON_DRV_CLEANUP_LEVEL19: 2080 /* Teardown resources used for multicast group handling */ 2081 hermon_mcg_fini(state); 2082 /* FALLTHROUGH */ 2083 2084 case HERMON_DRV_CLEANUP_LEVEL18: 2085 /* Unreserve the special QP contexts */ 2086 hermon_special_qp_contexts_unreserve(state); 2087 /* FALLTHROUGH */ 2088 2089 case HERMON_DRV_CLEANUP_LEVEL17: 2090 /* 2091 * Attempt to teardown all event queues (EQ). If we fail 2092 * here then print a warning message and return. Something 2093 * (either in HW or SW) has gone seriously wrong. 2094 */ 2095 status = hermon_eq_fini_all(state); 2096 if (status != DDI_SUCCESS) { 2097 HERMON_WARNING(state, "failed to teardown EQs"); 2098 return; 2099 } 2100 /* FALLTHROUGH */ 2101 case HERMON_DRV_CLEANUP_LEVEL16: 2102 /* Teardown Hermon interrupts */ 2103 hermon_isr_fini(state); 2104 /* FALLTHROUGH */ 2105 2106 case HERMON_DRV_CLEANUP_LEVEL15: 2107 status = hermon_intr_or_msi_fini(state); 2108 if (status != DDI_SUCCESS) { 2109 HERMON_WARNING(state, "failed to free intr/MSI"); 2110 return; 2111 } 2112 /* FALLTHROUGH */ 2113 2114 case HERMON_DRV_CLEANUP_LEVEL14: 2115 /* Free the resources for the Hermon internal UAR pages */ 2116 hermon_internal_uarpg_fini(state); 2117 /* FALLTHROUGH */ 2118 2119 case HERMON_DRV_CLEANUP_LEVEL13: 2120 /* 2121 * Free the PD that was used internally by Hermon software. If 2122 * we fail here then print a warning and return. Something 2123 * (probably software-related, but perhaps HW) has gone wrong. 2124 */ 2125 status = hermon_pd_free(state, &state->hs_pdhdl_internal); 2126 if (status != DDI_SUCCESS) { 2127 HERMON_WARNING(state, "failed to free internal PD"); 2128 return; 2129 } 2130 /* FALLTHROUGH */ 2131 2132 case HERMON_DRV_CLEANUP_LEVEL12: 2133 /* Cleanup all the phase2 resources first */ 2134 hermon_rsrc_fini(state, HERMON_RSRC_CLEANUP_ALL); 2135 /* FALLTHROUGH */ 2136 2137 case HERMON_DRV_CLEANUP_LEVEL11: 2138 /* LEVEL11 is after INIT_HCA */ 2139 /* FALLTHROUGH */ 2140 2141 2142 case HERMON_DRV_CLEANUP_LEVEL10: 2143 /* 2144 * Unmap the ICM memory area with UNMAP_ICM command. 2145 */ 2146 status = hermon_unmap_icm_cmd_post(state, NULL); 2147 if (status != DDI_SUCCESS) { 2148 cmn_err(CE_WARN, 2149 "hermon_hw_fini: failed to unmap ICM\n"); 2150 } 2151 2152 /* Free the initial ICM DMA handles */ 2153 hermon_icm_dma_fini(state); 2154 2155 /* Free the ICM table structures */ 2156 hermon_icm_tables_fini(state); 2157 2158 /* Free the ICM table handles */ 2159 kmem_free(state->hs_icm, HERMON_NUM_ICM_RESOURCES * 2160 sizeof (hermon_icm_table_t)); 2161 2162 /* FALLTHROUGH */ 2163 2164 case HERMON_DRV_CLEANUP_LEVEL9: 2165 /* 2166 * Unmap the ICM Aux memory area with UNMAP_ICM_AUX command. 2167 */ 2168 status = hermon_unmap_icm_aux_cmd_post(state); 2169 if (status != HERMON_CMD_SUCCESS) { 2170 cmn_err(CE_NOTE, 2171 "hermon_hw_fini: failed to unmap ICMA\n"); 2172 } 2173 /* FALLTHROUGH */ 2174 2175 case HERMON_DRV_CLEANUP_LEVEL8: 2176 /* 2177 * Deallocate ICM Aux DMA memory. 2178 */ 2179 hermon_dma_free(&state->hs_icma_dma); 2180 /* FALLTHROUGH */ 2181 2182 case HERMON_DRV_CLEANUP_LEVEL7: 2183 if (state->hs_fm_uarhdl) { 2184 hermon_regs_map_free(state, &state->hs_fm_uarhdl); 2185 state->hs_fm_uarhdl = NULL; 2186 } 2187 2188 if (state->hs_reg_uarhdl) { 2189 ddi_regs_map_free(&state->hs_reg_uarhdl); 2190 state->hs_reg_uarhdl = NULL; 2191 } 2192 2193 if (state->hs_bf_offset != 0 && state->hs_reg_bfhdl) { 2194 ddi_regs_map_free(&state->hs_reg_bfhdl); 2195 state->hs_reg_bfhdl = NULL; 2196 } 2197 2198 for (i = 0; i < HERMON_MAX_PORTS; i++) { 2199 if (state->hs_pkey[i]) { 2200 kmem_free(state->hs_pkey[i], (1 << 2201 state->hs_cfg_profile->cp_log_max_pkeytbl) * 2202 sizeof (ib_pkey_t)); 2203 state->hs_pkey[i] = NULL; 2204 } 2205 if (state->hs_guid[i]) { 2206 kmem_free(state->hs_guid[i], (1 << 2207 state->hs_cfg_profile->cp_log_max_gidtbl) * 2208 sizeof (ib_guid_t)); 2209 state->hs_guid[i] = NULL; 2210 } 2211 } 2212 /* FALLTHROUGH */ 2213 2214 case HERMON_DRV_CLEANUP_LEVEL6: 2215 /* 2216 * Unmap the firmware memory area with UNMAP_FA command. 2217 */ 2218 status = hermon_unmap_fa_cmd_post(state); 2219 2220 if (status != HERMON_CMD_SUCCESS) { 2221 cmn_err(CE_NOTE, 2222 "hermon_hw_fini: failed to unmap FW\n"); 2223 } 2224 2225 /* 2226 * Deallocate firmware DMA memory. 2227 */ 2228 hermon_dma_free(&state->hs_fw_dma); 2229 /* FALLTHROUGH */ 2230 2231 case HERMON_DRV_CLEANUP_LEVEL5: 2232 /* stop the poll thread */ 2233 if (state->hs_fm_poll_thread) { 2234 ddi_periodic_delete(state->hs_fm_poll_thread); 2235 state->hs_fm_poll_thread = NULL; 2236 } 2237 /* FALLTHROUGH */ 2238 2239 case HERMON_DRV_CLEANUP_LEVEL4: 2240 /* Then cleanup the phase1 resources */ 2241 hermon_rsrc_fini(state, HERMON_RSRC_CLEANUP_PHASE1_COMPLETE); 2242 /* FALLTHROUGH */ 2243 2244 case HERMON_DRV_CLEANUP_LEVEL3: 2245 /* Teardown any resources allocated for the config profile */ 2246 hermon_cfg_profile_fini(state); 2247 /* FALLTHROUGH */ 2248 2249 case HERMON_DRV_CLEANUP_LEVEL2: 2250 #ifdef HERMON_SUPPORTS_MSIX_BAR 2251 /* 2252 * unmap 3rd BAR, MSIX BAR 2253 */ 2254 if (state->hs_reg_msihdl) { 2255 ddi_regs_map_free(&state->hs_reg_msihdl); 2256 state->hs_reg_msihdl = NULL; 2257 } 2258 /* FALLTHROUGH */ 2259 #endif 2260 case HERMON_DRV_CLEANUP_LEVEL1: 2261 case HERMON_DRV_CLEANUP_LEVEL0: 2262 /* 2263 * LEVEL1 and LEVEL0 resources are freed in 2264 * hermon_drv_fini2(). 2265 */ 2266 break; 2267 2268 default: 2269 HERMON_WARNING(state, "unexpected driver cleanup level"); 2270 return; 2271 } 2272 } 2273 2274 2275 /* 2276 * hermon_soft_state_init() 2277 * Context: Only called from attach() path context 2278 */ 2279 static int 2280 hermon_soft_state_init(hermon_state_t *state) 2281 { 2282 ibt_hca_attr_t *hca_attr; 2283 uint64_t maxval, val; 2284 ibt_hca_flags_t caps = IBT_HCA_NO_FLAGS; 2285 ibt_hca_flags2_t caps2 = IBT_HCA2_NO_FLAGS; 2286 int status; 2287 int max_send_wqe_bytes; 2288 int max_recv_wqe_bytes; 2289 2290 /* 2291 * The ibc_hca_info_t struct is passed to the IBTF. This is the 2292 * routine where we initialize it. Many of the init values come from 2293 * either configuration variables or successful queries of the Hermon 2294 * hardware abilities 2295 */ 2296 state->hs_ibtfinfo.hca_ci_vers = IBCI_V3; 2297 state->hs_ibtfinfo.hca_dip = state->hs_dip; 2298 state->hs_ibtfinfo.hca_handle = (ibc_hca_hdl_t)state; 2299 state->hs_ibtfinfo.hca_ops = &hermon_ibc_ops; 2300 2301 hca_attr = kmem_zalloc(sizeof (ibt_hca_attr_t), KM_SLEEP); 2302 state->hs_ibtfinfo.hca_attr = hca_attr; 2303 2304 hca_attr->hca_fw_major_version = state->hs_fw.fw_rev_major; 2305 hca_attr->hca_fw_minor_version = state->hs_fw.fw_rev_minor; 2306 hca_attr->hca_fw_micro_version = state->hs_fw.fw_rev_subminor; 2307 2308 /* CQ interrupt moderation maximums - each limited to 16 bits */ 2309 hca_attr->hca_max_cq_mod_count = 0xFFFF; 2310 hca_attr->hca_max_cq_mod_usec = 0xFFFF; 2311 2312 /* CQ relocation to other EQs - change when multiple MSI-Xs are used */ 2313 hca_attr->hca_max_cq_handlers = 1; 2314 2315 /* 2316 * Determine HCA capabilities: 2317 * No default support for IBT_HCA_RD, IBT_HCA_RAW_MULTICAST, 2318 * IBT_HCA_ATOMICS_GLOBAL, IBT_HCA_RESIZE_CHAN, IBT_HCA_INIT_TYPE, 2319 * or IBT_HCA_SHUTDOWN_PORT 2320 * But IBT_HCA_AH_PORT_CHECK, IBT_HCA_SQD_RTS_PORT, IBT_HCA_SI_GUID, 2321 * IBT_HCA_RNR_NAK, IBT_HCA_CURRENT_QP_STATE, IBT_HCA_PORT_UP, 2322 * IBT_HCA_SRQ, IBT_HCA_RESIZE_SRQ and IBT_HCA_FMR are always 2323 * supported 2324 * All other features are conditionally supported, depending on the 2325 * status return by the Hermon HCA in QUERY_DEV_LIM. 2326 */ 2327 if (state->hs_devlim.ud_multi) { 2328 caps |= IBT_HCA_UD_MULTICAST; 2329 } 2330 if (state->hs_devlim.atomic) { 2331 caps |= IBT_HCA_ATOMICS_HCA; 2332 } 2333 if (state->hs_devlim.apm) { 2334 caps |= IBT_HCA_AUTO_PATH_MIG; 2335 } 2336 if (state->hs_devlim.pkey_v) { 2337 caps |= IBT_HCA_PKEY_CNTR; 2338 } 2339 if (state->hs_devlim.qkey_v) { 2340 caps |= IBT_HCA_QKEY_CNTR; 2341 } 2342 if (state->hs_devlim.ipoib_cksm) { 2343 caps |= IBT_HCA_CKSUM_FULL; 2344 caps2 |= IBT_HCA2_IP_CLASS; 2345 } 2346 if (state->hs_devlim.mod_wr_srq) { 2347 caps |= IBT_HCA_RESIZE_SRQ; 2348 } 2349 if (state->hs_devlim.lif) { 2350 caps |= IBT_HCA_LOCAL_INVAL_FENCE; 2351 } 2352 if (state->hs_devlim.reserved_lkey) { 2353 caps2 |= IBT_HCA2_RES_LKEY; 2354 hca_attr->hca_reserved_lkey = state->hs_devlim.rsv_lkey; 2355 } 2356 if (state->hs_devlim.local_inv && state->hs_devlim.remote_inv && 2357 state->hs_devlim.fast_reg_wr) { /* fw needs to be >= 2.6.636 */ 2358 if (state->hs_fw.fw_rev_major > 2) 2359 caps2 |= IBT_HCA2_MEM_MGT_EXT; 2360 else if (state->hs_fw.fw_rev_major == 2) 2361 if (state->hs_fw.fw_rev_minor > 6) 2362 caps2 |= IBT_HCA2_MEM_MGT_EXT; 2363 else if (state->hs_fw.fw_rev_minor == 6) 2364 if (state->hs_fw.fw_rev_subminor >= 636) 2365 caps2 |= IBT_HCA2_MEM_MGT_EXT; 2366 } 2367 if (state->hs_devlim.mps) { 2368 caps |= IBT_HCA_ZERO_BASED_VA; 2369 } 2370 if (state->hs_devlim.zb) { 2371 caps |= IBT_HCA_MULT_PAGE_SZ_MR; 2372 } 2373 caps |= (IBT_HCA_AH_PORT_CHECK | IBT_HCA_SQD_SQD_PORT | 2374 IBT_HCA_SI_GUID | IBT_HCA_RNR_NAK | IBT_HCA_CURRENT_QP_STATE | 2375 IBT_HCA_PORT_UP | IBT_HCA_RC_SRQ | IBT_HCA_UD_SRQ | IBT_HCA_FMR); 2376 2377 if (state->hs_devlim.log_max_gso_sz) { 2378 hca_attr->hca_max_lso_size = 2379 (1 << state->hs_devlim.log_max_gso_sz); 2380 /* 64 = ctrl & datagram seg, 4 = LSO seg, 16 = 1 SGL */ 2381 hca_attr->hca_max_lso_hdr_size = 2382 state->hs_devlim.max_desc_sz_sq - (64 + 4 + 16); 2383 } 2384 2385 caps |= IBT_HCA_WQE_SIZE_INFO; 2386 max_send_wqe_bytes = state->hs_devlim.max_desc_sz_sq; 2387 max_recv_wqe_bytes = state->hs_devlim.max_desc_sz_rq; 2388 hca_attr->hca_ud_send_sgl_sz = (max_send_wqe_bytes / 16) - 4; 2389 hca_attr->hca_conn_send_sgl_sz = (max_send_wqe_bytes / 16) - 1; 2390 hca_attr->hca_conn_rdma_sgl_overhead = 1; 2391 hca_attr->hca_recv_sgl_sz = max_recv_wqe_bytes / 16; 2392 2393 /* We choose not to support "inline" unless it improves performance */ 2394 hca_attr->hca_max_inline_size = 0; 2395 hca_attr->hca_ud_send_inline_sz = 0; 2396 hca_attr->hca_conn_send_inline_sz = 0; 2397 hca_attr->hca_conn_rdmaw_inline_overhead = 4; 2398 2399 hca_attr->hca_flags = caps; 2400 hca_attr->hca_flags2 = caps2; 2401 2402 /* 2403 * Set hca_attr's IDs 2404 */ 2405 hca_attr->hca_vendor_id = state->hs_vendor_id; 2406 hca_attr->hca_device_id = state->hs_device_id; 2407 hca_attr->hca_version_id = state->hs_revision_id; 2408 2409 /* 2410 * Determine number of available QPs and max QP size. Number of 2411 * available QPs is determined by subtracting the number of 2412 * "reserved QPs" (i.e. reserved for firmware use) from the 2413 * total number configured. 2414 */ 2415 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_num_qp); 2416 hca_attr->hca_max_qp = val - ((uint64_t)1 << 2417 state->hs_devlim.log_rsvd_qp); 2418 maxval = ((uint64_t)1 << state->hs_devlim.log_max_qp_sz); 2419 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_max_qp_sz); 2420 if (val > maxval) { 2421 kmem_free(hca_attr, sizeof (ibt_hca_attr_t)); 2422 HERMON_ATTACH_MSG(state->hs_attach_buf, 2423 "soft_state_init_maxqpsz_toobig_fail"); 2424 return (DDI_FAILURE); 2425 } 2426 /* we need to reduce this by the max space needed for headroom */ 2427 hca_attr->hca_max_qp_sz = (uint_t)val - (HERMON_QP_OH_SIZE >> 2428 HERMON_QP_WQE_LOG_MINIMUM) - 1; 2429 2430 /* 2431 * Determine max scatter-gather size in WQEs. The HCA has split 2432 * the max sgl into rec'v Q and send Q values. Use the least. 2433 * 2434 * This is mainly useful for legacy clients. Smart clients 2435 * such as IPoIB will use the IBT_HCA_WQE_SIZE_INFO sgl info. 2436 */ 2437 if (state->hs_devlim.max_sg_rq <= state->hs_devlim.max_sg_sq) { 2438 maxval = state->hs_devlim.max_sg_rq; 2439 } else { 2440 maxval = state->hs_devlim.max_sg_sq; 2441 } 2442 val = state->hs_cfg_profile->cp_wqe_max_sgl; 2443 if (val > maxval) { 2444 kmem_free(hca_attr, sizeof (ibt_hca_attr_t)); 2445 HERMON_ATTACH_MSG(state->hs_attach_buf, 2446 "soft_state_init_toomanysgl_fail"); 2447 return (DDI_FAILURE); 2448 } 2449 /* If the rounded value for max SGL is too large, cap it */ 2450 if (state->hs_cfg_profile->cp_wqe_real_max_sgl > maxval) { 2451 state->hs_cfg_profile->cp_wqe_real_max_sgl = (uint32_t)maxval; 2452 val = maxval; 2453 } else { 2454 val = state->hs_cfg_profile->cp_wqe_real_max_sgl; 2455 } 2456 2457 hca_attr->hca_max_sgl = (uint_t)val; 2458 hca_attr->hca_max_rd_sgl = 0; /* zero because RD is unsupported */ 2459 2460 /* 2461 * Determine number of available CQs and max CQ size. Number of 2462 * available CQs is determined by subtracting the number of 2463 * "reserved CQs" (i.e. reserved for firmware use) from the 2464 * total number configured. 2465 */ 2466 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_num_cq); 2467 hca_attr->hca_max_cq = val - ((uint64_t)1 << 2468 state->hs_devlim.log_rsvd_cq); 2469 maxval = ((uint64_t)1 << state->hs_devlim.log_max_cq_sz); 2470 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_max_cq_sz) - 1; 2471 if (val > maxval) { 2472 kmem_free(hca_attr, sizeof (ibt_hca_attr_t)); 2473 HERMON_ATTACH_MSG(state->hs_attach_buf, 2474 "soft_state_init_maxcqsz_toobig_fail"); 2475 return (DDI_FAILURE); 2476 } 2477 hca_attr->hca_max_cq_sz = (uint_t)val; 2478 2479 /* 2480 * Determine number of available SRQs and max SRQ size. Number of 2481 * available SRQs is determined by subtracting the number of 2482 * "reserved SRQs" (i.e. reserved for firmware use) from the 2483 * total number configured. 2484 */ 2485 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_num_srq); 2486 hca_attr->hca_max_srqs = val - ((uint64_t)1 << 2487 state->hs_devlim.log_rsvd_srq); 2488 maxval = ((uint64_t)1 << state->hs_devlim.log_max_srq_sz); 2489 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_max_srq_sz); 2490 2491 if (val > maxval) { 2492 kmem_free(hca_attr, sizeof (ibt_hca_attr_t)); 2493 HERMON_ATTACH_MSG(state->hs_attach_buf, 2494 "soft_state_init_maxsrqsz_toobig_fail"); 2495 return (DDI_FAILURE); 2496 } 2497 hca_attr->hca_max_srqs_sz = (uint_t)val; 2498 2499 val = hca_attr->hca_recv_sgl_sz - 1; /* SRQ has a list link */ 2500 maxval = state->hs_devlim.max_sg_rq - 1; 2501 if (val > maxval) { 2502 kmem_free(hca_attr, sizeof (ibt_hca_attr_t)); 2503 HERMON_ATTACH_MSG(state->hs_attach_buf, 2504 "soft_state_init_toomanysrqsgl_fail"); 2505 return (DDI_FAILURE); 2506 } 2507 hca_attr->hca_max_srq_sgl = (uint_t)val; 2508 2509 /* 2510 * Determine supported HCA page sizes 2511 * XXX 2512 * For now we simply return the system pagesize as the only supported 2513 * pagesize 2514 */ 2515 hca_attr->hca_page_sz = ((PAGESIZE == (1 << 13)) ? IBT_PAGE_8K : 2516 IBT_PAGE_4K); 2517 2518 /* 2519 * Determine number of available MemReg, MemWin, and their max size. 2520 * Number of available MRs and MWs is determined by subtracting 2521 * the number of "reserved MPTs" (i.e. reserved for firmware use) 2522 * from the total number configured for each. 2523 */ 2524 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_num_dmpt); 2525 hca_attr->hca_max_memr = val - ((uint64_t)1 << 2526 state->hs_devlim.log_rsvd_dmpt); 2527 hca_attr->hca_max_mem_win = state->hs_devlim.mem_win ? (val - 2528 ((uint64_t)1 << state->hs_devlim.log_rsvd_dmpt)) : 0; 2529 maxval = state->hs_devlim.log_max_mrw_sz; 2530 val = state->hs_cfg_profile->cp_log_max_mrw_sz; 2531 if (val > maxval) { 2532 kmem_free(hca_attr, sizeof (ibt_hca_attr_t)); 2533 HERMON_ATTACH_MSG(state->hs_attach_buf, 2534 "soft_state_init_maxmrwsz_toobig_fail"); 2535 return (DDI_FAILURE); 2536 } 2537 hca_attr->hca_max_memr_len = ((uint64_t)1 << val); 2538 2539 /* Determine RDMA/Atomic properties */ 2540 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_num_rdb); 2541 hca_attr->hca_max_rsc = (uint_t)val; 2542 val = state->hs_cfg_profile->cp_hca_max_rdma_in_qp; 2543 hca_attr->hca_max_rdma_in_qp = (uint8_t)val; 2544 val = state->hs_cfg_profile->cp_hca_max_rdma_out_qp; 2545 hca_attr->hca_max_rdma_out_qp = (uint8_t)val; 2546 hca_attr->hca_max_rdma_in_ee = 0; 2547 hca_attr->hca_max_rdma_out_ee = 0; 2548 2549 /* 2550 * Determine maximum number of raw IPv6 and Ether QPs. Set to 0 2551 * because neither type of raw QP is supported 2552 */ 2553 hca_attr->hca_max_ipv6_qp = 0; 2554 hca_attr->hca_max_ether_qp = 0; 2555 2556 /* Determine max number of MCGs and max QP-per-MCG */ 2557 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_num_qp); 2558 hca_attr->hca_max_mcg_qps = (uint_t)val; 2559 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_num_mcg); 2560 hca_attr->hca_max_mcg = (uint_t)val; 2561 val = state->hs_cfg_profile->cp_num_qp_per_mcg; 2562 hca_attr->hca_max_qp_per_mcg = (uint_t)val; 2563 2564 /* Determine max number partitions (i.e. PKeys) */ 2565 maxval = ((uint64_t)state->hs_cfg_profile->cp_num_ports << 2566 state->hs_queryport.log_max_pkey); 2567 val = ((uint64_t)state->hs_cfg_profile->cp_num_ports << 2568 state->hs_cfg_profile->cp_log_max_pkeytbl); 2569 2570 if (val > maxval) { 2571 kmem_free(hca_attr, sizeof (ibt_hca_attr_t)); 2572 HERMON_ATTACH_MSG(state->hs_attach_buf, 2573 "soft_state_init_toomanypkey_fail"); 2574 return (DDI_FAILURE); 2575 } 2576 hca_attr->hca_max_partitions = (uint16_t)val; 2577 2578 /* Determine number of ports */ 2579 maxval = state->hs_devlim.num_ports; 2580 val = state->hs_cfg_profile->cp_num_ports; 2581 if ((val > maxval) || (val == 0)) { 2582 kmem_free(hca_attr, sizeof (ibt_hca_attr_t)); 2583 HERMON_ATTACH_MSG(state->hs_attach_buf, 2584 "soft_state_init_toomanyports_fail"); 2585 return (DDI_FAILURE); 2586 } 2587 hca_attr->hca_nports = (uint8_t)val; 2588 2589 /* Copy NodeGUID and SystemImageGUID from softstate */ 2590 hca_attr->hca_node_guid = state->hs_nodeguid; 2591 hca_attr->hca_si_guid = state->hs_sysimgguid; 2592 2593 /* 2594 * Determine local ACK delay. Use the value suggested by the Hermon 2595 * hardware (from the QUERY_DEV_CAP command) 2596 */ 2597 hca_attr->hca_local_ack_delay = state->hs_devlim.ca_ack_delay; 2598 2599 /* Determine max SGID table and PKey table sizes */ 2600 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_max_gidtbl); 2601 hca_attr->hca_max_port_sgid_tbl_sz = (uint_t)val; 2602 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_max_pkeytbl); 2603 hca_attr->hca_max_port_pkey_tbl_sz = (uint16_t)val; 2604 2605 /* Determine max number of PDs */ 2606 maxval = ((uint64_t)1 << state->hs_devlim.log_max_pd); 2607 val = ((uint64_t)1 << state->hs_cfg_profile->cp_log_num_pd); 2608 if (val > maxval) { 2609 kmem_free(hca_attr, sizeof (ibt_hca_attr_t)); 2610 HERMON_ATTACH_MSG(state->hs_attach_buf, 2611 "soft_state_init_toomanypd_fail"); 2612 return (DDI_FAILURE); 2613 } 2614 hca_attr->hca_max_pd = (uint_t)val; 2615 2616 /* Determine max number of Address Handles (NOT IN ARBEL or HERMON) */ 2617 hca_attr->hca_max_ah = 0; 2618 2619 /* No RDDs or EECs (since Reliable Datagram is not supported) */ 2620 hca_attr->hca_max_rdd = 0; 2621 hca_attr->hca_max_eec = 0; 2622 2623 /* Initialize lock for reserved UAR page access */ 2624 mutex_init(&state->hs_uar_lock, NULL, MUTEX_DRIVER, 2625 DDI_INTR_PRI(state->hs_intrmsi_pri)); 2626 2627 /* Initialize the flash fields */ 2628 state->hs_fw_flashstarted = 0; 2629 mutex_init(&state->hs_fw_flashlock, NULL, MUTEX_DRIVER, 2630 DDI_INTR_PRI(state->hs_intrmsi_pri)); 2631 2632 /* Initialize the lock for the info ioctl */ 2633 mutex_init(&state->hs_info_lock, NULL, MUTEX_DRIVER, 2634 DDI_INTR_PRI(state->hs_intrmsi_pri)); 2635 2636 /* Initialize the AVL tree for QP number support */ 2637 hermon_qpn_avl_init(state); 2638 2639 /* Initialize the kstat info structure */ 2640 status = hermon_kstat_init(state); 2641 if (status != DDI_SUCCESS) { 2642 hermon_qpn_avl_fini(state); 2643 mutex_destroy(&state->hs_info_lock); 2644 mutex_destroy(&state->hs_fw_flashlock); 2645 mutex_destroy(&state->hs_uar_lock); 2646 kmem_free(hca_attr, sizeof (ibt_hca_attr_t)); 2647 HERMON_ATTACH_MSG(state->hs_attach_buf, 2648 "soft_state_init_kstatinit_fail"); 2649 return (DDI_FAILURE); 2650 } 2651 2652 return (DDI_SUCCESS); 2653 } 2654 2655 2656 /* 2657 * hermon_soft_state_fini() 2658 * Context: Called only from detach() path context 2659 */ 2660 static void 2661 hermon_soft_state_fini(hermon_state_t *state) 2662 { 2663 2664 /* Teardown the kstat info */ 2665 hermon_kstat_fini(state); 2666 2667 /* Teardown the AVL tree for QP number support */ 2668 hermon_qpn_avl_fini(state); 2669 2670 /* Free up info ioctl mutex */ 2671 mutex_destroy(&state->hs_info_lock); 2672 2673 /* Free up flash mutex */ 2674 mutex_destroy(&state->hs_fw_flashlock); 2675 2676 /* Free up the UAR page access mutex */ 2677 mutex_destroy(&state->hs_uar_lock); 2678 2679 /* Free up the hca_attr struct */ 2680 kmem_free(state->hs_ibtfinfo.hca_attr, sizeof (ibt_hca_attr_t)); 2681 2682 } 2683 2684 /* 2685 * hermon_icm_config_setup() 2686 * Context: Only called from attach() path context 2687 */ 2688 static int 2689 hermon_icm_config_setup(hermon_state_t *state, 2690 hermon_hw_initqueryhca_t *inithca) 2691 { 2692 hermon_hw_querydevlim_t *devlim; 2693 hermon_cfg_profile_t *cfg; 2694 hermon_icm_table_t *icm_p[HERMON_NUM_ICM_RESOURCES]; 2695 hermon_icm_table_t *icm; 2696 hermon_icm_table_t *tmp; 2697 uint64_t icm_addr; 2698 uint64_t icm_size; 2699 int status, i, j; 2700 2701 2702 /* Bring in local devlims, cfg_profile and hs_icm table list */ 2703 devlim = &state->hs_devlim; 2704 cfg = state->hs_cfg_profile; 2705 icm = state->hs_icm; 2706 2707 /* 2708 * Assign each ICM table's entry size from data in the devlims, 2709 * except for RDB and MCG sizes, which are not returned in devlims 2710 * but do have a fixed size, and the UAR context entry size, which 2711 * we determine. For this, we use the "cp_num_pgs_per_uce" value 2712 * from our hs_cfg_profile. 2713 */ 2714 icm[HERMON_CMPT].object_size = devlim->cmpt_entry_sz; 2715 icm[HERMON_CMPT_QPC].object_size = devlim->cmpt_entry_sz; 2716 icm[HERMON_CMPT_SRQC].object_size = devlim->cmpt_entry_sz; 2717 icm[HERMON_CMPT_CQC].object_size = devlim->cmpt_entry_sz; 2718 icm[HERMON_CMPT_EQC].object_size = devlim->cmpt_entry_sz; 2719 icm[HERMON_MTT].object_size = devlim->mtt_entry_sz; 2720 icm[HERMON_DMPT].object_size = devlim->dmpt_entry_sz; 2721 icm[HERMON_QPC].object_size = devlim->qpc_entry_sz; 2722 icm[HERMON_CQC].object_size = devlim->cqc_entry_sz; 2723 icm[HERMON_SRQC].object_size = devlim->srq_entry_sz; 2724 icm[HERMON_EQC].object_size = devlim->eqc_entry_sz; 2725 icm[HERMON_RDB].object_size = devlim->rdmardc_entry_sz * 2726 cfg->cp_hca_max_rdma_in_qp; 2727 icm[HERMON_MCG].object_size = HERMON_MCGMEM_SZ(state); 2728 icm[HERMON_ALTC].object_size = devlim->altc_entry_sz; 2729 icm[HERMON_AUXC].object_size = devlim->aux_entry_sz; 2730 2731 /* Assign each ICM table's log2 number of entries */ 2732 icm[HERMON_CMPT].log_num_entries = cfg->cp_log_num_cmpt; 2733 icm[HERMON_CMPT_QPC].log_num_entries = cfg->cp_log_num_qp; 2734 icm[HERMON_CMPT_SRQC].log_num_entries = cfg->cp_log_num_srq; 2735 icm[HERMON_CMPT_CQC].log_num_entries = cfg->cp_log_num_cq; 2736 icm[HERMON_CMPT_EQC].log_num_entries = HERMON_NUM_EQ_SHIFT; 2737 icm[HERMON_MTT].log_num_entries = cfg->cp_log_num_mtt; 2738 icm[HERMON_DMPT].log_num_entries = cfg->cp_log_num_dmpt; 2739 icm[HERMON_QPC].log_num_entries = cfg->cp_log_num_qp; 2740 icm[HERMON_SRQC].log_num_entries = cfg->cp_log_num_srq; 2741 icm[HERMON_CQC].log_num_entries = cfg->cp_log_num_cq; 2742 icm[HERMON_EQC].log_num_entries = HERMON_NUM_EQ_SHIFT; 2743 icm[HERMON_RDB].log_num_entries = cfg->cp_log_num_qp; 2744 icm[HERMON_MCG].log_num_entries = cfg->cp_log_num_mcg; 2745 icm[HERMON_ALTC].log_num_entries = cfg->cp_log_num_qp; 2746 icm[HERMON_AUXC].log_num_entries = cfg->cp_log_num_qp; 2747 2748 /* Initialize the ICM tables */ 2749 hermon_icm_tables_init(state); 2750 2751 /* 2752 * ICM tables must be aligned on their size in the ICM address 2753 * space. So, here we order the tables from largest total table 2754 * size to the smallest. All tables are a power of 2 in size, so 2755 * this will ensure that all tables are aligned on their own size 2756 * without wasting space in the ICM. 2757 * 2758 * In order to easily set the ICM addresses without needing to 2759 * worry about the ordering of our table indices as relates to 2760 * the hermon_rsrc_type_t enum, we will use a list of pointers 2761 * representing the tables for the sort, then assign ICM addresses 2762 * below using it. 2763 */ 2764 for (i = 0; i < HERMON_NUM_ICM_RESOURCES; i++) { 2765 icm_p[i] = &icm[i]; 2766 } 2767 for (i = HERMON_NUM_ICM_RESOURCES; i > 0; i--) { 2768 switch (i) { 2769 case HERMON_CMPT_QPC: 2770 case HERMON_CMPT_SRQC: 2771 case HERMON_CMPT_CQC: 2772 case HERMON_CMPT_EQC: 2773 continue; 2774 } 2775 for (j = 1; j < i; j++) { 2776 if (icm_p[j]->table_size > icm_p[j - 1]->table_size) { 2777 tmp = icm_p[j]; 2778 icm_p[j] = icm_p[j - 1]; 2779 icm_p[j - 1] = tmp; 2780 } 2781 } 2782 } 2783 2784 /* Initialize the ICM address and ICM size */ 2785 icm_addr = icm_size = 0; 2786 2787 /* 2788 * Set the ICM base address of each table, using our sorted 2789 * list of pointers from above. 2790 */ 2791 for (i = 0; i < HERMON_NUM_ICM_RESOURCES; i++) { 2792 j = icm_p[i]->icm_type; 2793 switch (j) { 2794 case HERMON_CMPT_QPC: 2795 case HERMON_CMPT_SRQC: 2796 case HERMON_CMPT_CQC: 2797 case HERMON_CMPT_EQC: 2798 continue; 2799 } 2800 if (icm[j].table_size) { 2801 /* 2802 * Set the ICM base address in the table, save the 2803 * ICM offset in the rsrc pool and increment the 2804 * total ICM allocation. 2805 */ 2806 icm[j].icm_baseaddr = icm_addr; 2807 if (hermon_verbose) { 2808 IBTF_DPRINTF_L2("ICMADDR", "rsrc %x @ %p" 2809 " size %llx", j, icm[j].icm_baseaddr, 2810 icm[j].table_size); 2811 } 2812 icm_size += icm[j].table_size; 2813 } 2814 2815 /* Verify that we don't exceed maximum ICM size */ 2816 if (icm_size > devlim->max_icm_size) { 2817 /* free the ICM table memory resources */ 2818 hermon_icm_tables_fini(state); 2819 cmn_err(CE_WARN, "ICM configuration exceeds maximum " 2820 "configuration: max (0x%lx) requested (0x%lx)\n", 2821 (ulong_t)devlim->max_icm_size, (ulong_t)icm_size); 2822 HERMON_ATTACH_MSG(state->hs_attach_buf, 2823 "icm_config_toobig_fail"); 2824 return (DDI_FAILURE); 2825 } 2826 2827 /* assign address to the 4 pieces of the CMPT */ 2828 if (j == HERMON_CMPT) { 2829 uint64_t cmpt_size = icm[j].table_size >> 2; 2830 #define init_cmpt_icm_baseaddr(rsrc, indx) \ 2831 icm[rsrc].icm_baseaddr = icm_addr + (indx * cmpt_size); 2832 init_cmpt_icm_baseaddr(HERMON_CMPT_QPC, 0); 2833 init_cmpt_icm_baseaddr(HERMON_CMPT_SRQC, 1); 2834 init_cmpt_icm_baseaddr(HERMON_CMPT_CQC, 2); 2835 init_cmpt_icm_baseaddr(HERMON_CMPT_EQC, 3); 2836 } 2837 2838 /* Increment the ICM address for the next table */ 2839 icm_addr += icm[j].table_size; 2840 } 2841 2842 /* Populate the structure for the INIT_HCA command */ 2843 hermon_inithca_set(state, inithca); 2844 2845 /* 2846 * Prior to invoking INIT_HCA, we must have ICM memory in place 2847 * for the reserved objects in each table. We will allocate and map 2848 * this initial ICM memory here. Note that given the assignment 2849 * of span_size above, tables that are smaller or equal in total 2850 * size to the default span_size will be mapped in full. 2851 */ 2852 status = hermon_icm_dma_init(state); 2853 if (status != DDI_SUCCESS) { 2854 /* free the ICM table memory resources */ 2855 hermon_icm_tables_fini(state); 2856 HERMON_WARNING(state, "Failed to allocate initial ICM"); 2857 HERMON_ATTACH_MSG(state->hs_attach_buf, 2858 "icm_config_dma_init_fail"); 2859 return (DDI_FAILURE); 2860 } 2861 2862 return (DDI_SUCCESS); 2863 } 2864 2865 /* 2866 * hermon_inithca_set() 2867 * Context: Only called from attach() path context 2868 */ 2869 static void 2870 hermon_inithca_set(hermon_state_t *state, hermon_hw_initqueryhca_t *inithca) 2871 { 2872 hermon_cfg_profile_t *cfg; 2873 hermon_icm_table_t *icm; 2874 int i; 2875 2876 2877 /* Populate the INIT_HCA structure */ 2878 icm = state->hs_icm; 2879 cfg = state->hs_cfg_profile; 2880 2881 /* set version */ 2882 inithca->version = 0x02; /* PRM 0.36 */ 2883 /* set cacheline - log2 in 16-byte chunks */ 2884 inithca->log2_cacheline = 0x2; /* optimized for 64 byte cache */ 2885 2886 /* we need to update the inithca info with thie UAR info too */ 2887 inithca->uar.log_max_uars = highbit(cfg->cp_log_num_uar); 2888 inithca->uar.uar_pg_sz = PAGESHIFT - HERMON_PAGESHIFT; 2889 2890 /* Set endianess */ 2891 #ifdef _LITTLE_ENDIAN 2892 inithca->big_endian = 0; 2893 #else 2894 inithca->big_endian = 1; 2895 #endif 2896 2897 /* Port Checking is on by default */ 2898 inithca->udav_port_chk = HERMON_UDAV_PORTCHK_ENABLED; 2899 2900 /* Enable IPoIB checksum */ 2901 if (state->hs_devlim.ipoib_cksm) 2902 inithca->chsum_en = 1; 2903 2904 /* Set each ICM table's attributes */ 2905 for (i = 0; i < HERMON_NUM_ICM_RESOURCES; i++) { 2906 switch (icm[i].icm_type) { 2907 case HERMON_CMPT: 2908 inithca->tpt.cmpt_baseaddr = icm[i].icm_baseaddr; 2909 break; 2910 2911 case HERMON_MTT: 2912 inithca->tpt.mtt_baseaddr = icm[i].icm_baseaddr; 2913 break; 2914 2915 case HERMON_DMPT: 2916 inithca->tpt.dmpt_baseaddr = icm[i].icm_baseaddr; 2917 inithca->tpt.log_dmpt_sz = icm[i].log_num_entries; 2918 inithca->tpt.pgfault_rnr_to = 0; /* just in case */ 2919 break; 2920 2921 case HERMON_QPC: 2922 inithca->context.log_num_qp = icm[i].log_num_entries; 2923 inithca->context.qpc_baseaddr_h = 2924 icm[i].icm_baseaddr >> 32; 2925 inithca->context.qpc_baseaddr_l = 2926 (icm[i].icm_baseaddr & 0xFFFFFFFF) >> 5; 2927 break; 2928 2929 case HERMON_CQC: 2930 inithca->context.log_num_cq = icm[i].log_num_entries; 2931 inithca->context.cqc_baseaddr_h = 2932 icm[i].icm_baseaddr >> 32; 2933 inithca->context.cqc_baseaddr_l = 2934 (icm[i].icm_baseaddr & 0xFFFFFFFF) >> 5; 2935 break; 2936 2937 case HERMON_SRQC: 2938 inithca->context.log_num_srq = icm[i].log_num_entries; 2939 inithca->context.srqc_baseaddr_h = 2940 icm[i].icm_baseaddr >> 32; 2941 inithca->context.srqc_baseaddr_l = 2942 (icm[i].icm_baseaddr & 0xFFFFFFFF) >> 5; 2943 break; 2944 2945 case HERMON_EQC: 2946 inithca->context.log_num_eq = icm[i].log_num_entries; 2947 inithca->context.eqc_baseaddr_h = 2948 icm[i].icm_baseaddr >> 32; 2949 inithca->context.eqc_baseaddr_l = 2950 (icm[i].icm_baseaddr & 0xFFFFFFFF) >> 5; 2951 break; 2952 2953 case HERMON_RDB: 2954 inithca->context.rdmardc_baseaddr_h = 2955 icm[i].icm_baseaddr >> 32; 2956 inithca->context.rdmardc_baseaddr_l = 2957 (icm[i].icm_baseaddr & 0xFFFFFFFF) >> 5; 2958 inithca->context.log_num_rdmardc = 2959 icm[i].log_num_entries; 2960 break; 2961 2962 case HERMON_MCG: 2963 inithca->multi.mc_baseaddr = icm[i].icm_baseaddr; 2964 inithca->multi.log_mc_tbl_sz = icm[i].log_num_entries; 2965 inithca->multi.log_mc_tbl_ent = 2966 highbit(HERMON_MCGMEM_SZ(state)) - 1; 2967 inithca->multi.log_mc_tbl_hash_sz = 2968 cfg->cp_log_num_mcg_hash; 2969 inithca->multi.mc_hash_fn = HERMON_MCG_DEFAULT_HASH_FN; 2970 break; 2971 2972 case HERMON_ALTC: 2973 inithca->context.altc_baseaddr = icm[i].icm_baseaddr; 2974 break; 2975 2976 case HERMON_AUXC: 2977 inithca->context.auxc_baseaddr = icm[i].icm_baseaddr; 2978 break; 2979 2980 default: 2981 break; 2982 2983 } 2984 } 2985 2986 } 2987 2988 /* 2989 * hermon_icm_tables_init() 2990 * Context: Only called from attach() path context 2991 * 2992 * Dynamic ICM breaks the various ICM tables into "span_size" chunks 2993 * to enable allocation of backing memory on demand. Arbel used a 2994 * fixed size ARBEL_ICM_SPAN_SIZE (initially was 512KB) as the 2995 * span_size for all ICM chunks. Hermon has other considerations, 2996 * so the span_size used differs from Arbel. 2997 * 2998 * The basic considerations for why Hermon differs are: 2999 * 3000 * 1) ICM memory is in units of HERMON pages. 3001 * 3002 * 2) The AUXC table is approximately 1 byte per QP. 3003 * 3004 * 3) ICM memory for AUXC, ALTC, and RDB is allocated when 3005 * the ICM memory for the corresponding QPC is allocated. 3006 * 3007 * 4) ICM memory for the CMPT corresponding to the various primary 3008 * resources (QPC, SRQC, CQC, and EQC) is allocated when the ICM 3009 * memory for the primary resource is allocated. 3010 * 3011 * One HERMON page (4KB) would typically map 4K QPs worth of AUXC. 3012 * So, the minimum chunk for the various QPC related ICM memory should 3013 * all be allocated to support the 4K QPs. Currently, this means the 3014 * amount of memory for the various QP chunks is: 3015 * 3016 * QPC 256*4K bytes 3017 * RDB 128*4K bytes 3018 * CMPT 64*4K bytes 3019 * ALTC 64*4K bytes 3020 * AUXC 1*4K bytes 3021 * 3022 * The span_size chosen for the QP resource is 4KB of AUXC entries, 3023 * or 1 HERMON_PAGESIZE worth, which is the minimum ICM mapping size. 3024 * 3025 * Other ICM resources can have their span_size be more arbitrary. 3026 * This is 4K (HERMON_ICM_SPAN), except for MTTs because they are tiny. 3027 */ 3028 3029 /* macro to make the code below cleaner */ 3030 #define init_dependent(rsrc, dep) \ 3031 icm[dep].span = icm[rsrc].span; \ 3032 icm[dep].num_spans = icm[rsrc].num_spans; \ 3033 icm[dep].split_shift = icm[rsrc].split_shift; \ 3034 icm[dep].span_mask = icm[rsrc].span_mask; \ 3035 icm[dep].span_shift = icm[rsrc].span_shift; \ 3036 icm[dep].rsrc_mask = icm[rsrc].rsrc_mask; \ 3037 if (hermon_verbose) { \ 3038 IBTF_DPRINTF_L2("hermon", "tables_init: " \ 3039 "rsrc (0x%x) size (0x%lx) span (0x%x) " \ 3040 "num_spans (0x%x)", dep, icm[dep].table_size, \ 3041 icm[dep].span, icm[dep].num_spans); \ 3042 IBTF_DPRINTF_L2("hermon", "tables_init: " \ 3043 "span_shift (0x%x) split_shift (0x%x)", \ 3044 icm[dep].span_shift, icm[dep].split_shift); \ 3045 IBTF_DPRINTF_L2("hermon", "tables_init: " \ 3046 "span_mask (0x%x) rsrc_mask (0x%x)", \ 3047 icm[dep].span_mask, icm[dep].rsrc_mask); \ 3048 } 3049 3050 static void 3051 hermon_icm_tables_init(hermon_state_t *state) 3052 { 3053 hermon_icm_table_t *icm; 3054 int i, k; 3055 uint32_t per_split; 3056 3057 3058 icm = state->hs_icm; 3059 3060 for (i = 0; i < HERMON_NUM_ICM_RESOURCES; i++) { 3061 icm[i].icm_type = i; 3062 icm[i].num_entries = 1 << icm[i].log_num_entries; 3063 icm[i].log_object_size = highbit(icm[i].object_size) - 1; 3064 icm[i].table_size = icm[i].num_entries << 3065 icm[i].log_object_size; 3066 3067 /* deal with "dependent" resource types */ 3068 switch (i) { 3069 case HERMON_AUXC: 3070 #ifdef HERMON_FW_WORKAROUND 3071 icm[i].table_size = 0x80000000ull; 3072 /* FALLTHROUGH */ 3073 #endif 3074 case HERMON_CMPT_QPC: 3075 case HERMON_RDB: 3076 case HERMON_ALTC: 3077 init_dependent(HERMON_QPC, i); 3078 continue; 3079 case HERMON_CMPT_SRQC: 3080 init_dependent(HERMON_SRQC, i); 3081 continue; 3082 case HERMON_CMPT_CQC: 3083 init_dependent(HERMON_CQC, i); 3084 continue; 3085 case HERMON_CMPT_EQC: 3086 init_dependent(HERMON_EQC, i); 3087 continue; 3088 } 3089 3090 icm[i].span = HERMON_ICM_SPAN; /* default #rsrc's in 1 span */ 3091 if (i == HERMON_MTT) /* Alloc enough MTTs to map 256MB */ 3092 icm[i].span = HERMON_ICM_SPAN * 16; 3093 icm[i].num_spans = icm[i].num_entries / icm[i].span; 3094 if (icm[i].num_spans == 0) { 3095 icm[i].span = icm[i].num_entries; 3096 per_split = 1; 3097 icm[i].num_spans = icm[i].num_entries / icm[i].span; 3098 } else { 3099 per_split = icm[i].num_spans / HERMON_ICM_SPLIT; 3100 if (per_split == 0) { 3101 per_split = 1; 3102 } 3103 } 3104 if (hermon_verbose) 3105 IBTF_DPRINTF_L2("ICM", "rsrc %x span %x num_spans %x", 3106 i, icm[i].span, icm[i].num_spans); 3107 3108 /* 3109 * Ensure a minimum table size of an ICM page, and a 3110 * maximum span size of the ICM table size. This ensures 3111 * that we don't have less than an ICM page to map, which is 3112 * impossible, and that we will map an entire table at 3113 * once if it's total size is less than the span size. 3114 */ 3115 icm[i].table_size = max(icm[i].table_size, HERMON_PAGESIZE); 3116 3117 icm[i].span_shift = 0; 3118 for (k = icm[i].span; k != 1; k >>= 1) 3119 icm[i].span_shift++; 3120 icm[i].split_shift = icm[i].span_shift; 3121 for (k = per_split; k != 1; k >>= 1) 3122 icm[i].split_shift++; 3123 icm[i].span_mask = (1 << icm[i].split_shift) - 3124 (1 << icm[i].span_shift); 3125 icm[i].rsrc_mask = (1 << icm[i].span_shift) - 1; 3126 3127 3128 /* Initialize the table lock */ 3129 mutex_init(&icm[i].icm_table_lock, NULL, MUTEX_DRIVER, 3130 DDI_INTR_PRI(state->hs_intrmsi_pri)); 3131 cv_init(&icm[i].icm_table_cv, NULL, CV_DRIVER, NULL); 3132 3133 if (hermon_verbose) { 3134 IBTF_DPRINTF_L2("hermon", "tables_init: " 3135 "rsrc (0x%x) size (0x%lx)", i, icm[i].table_size); 3136 IBTF_DPRINTF_L2("hermon", "tables_init: " 3137 "span (0x%x) num_spans (0x%x)", 3138 icm[i].span, icm[i].num_spans); 3139 IBTF_DPRINTF_L2("hermon", "tables_init: " 3140 "span_shift (0x%x) split_shift (0x%x)", 3141 icm[i].span_shift, icm[i].split_shift); 3142 IBTF_DPRINTF_L2("hermon", "tables_init: " 3143 "span_mask (0x%x) rsrc_mask (0x%x)", 3144 icm[i].span_mask, icm[i].rsrc_mask); 3145 } 3146 } 3147 3148 } 3149 3150 /* 3151 * hermon_icm_tables_fini() 3152 * Context: Only called from attach() path context 3153 * 3154 * Clean up all icm_tables. Free the bitmap and dma_info arrays. 3155 */ 3156 static void 3157 hermon_icm_tables_fini(hermon_state_t *state) 3158 { 3159 hermon_icm_table_t *icm; 3160 int nspans; 3161 int i, j; 3162 3163 3164 icm = state->hs_icm; 3165 3166 for (i = 0; i < HERMON_NUM_ICM_RESOURCES; i++) { 3167 3168 mutex_enter(&icm[i].icm_table_lock); 3169 nspans = icm[i].num_spans; 3170 3171 for (j = 0; j < HERMON_ICM_SPLIT; j++) { 3172 if (icm[i].icm_dma[j]) 3173 /* Free the ICM DMA slots */ 3174 kmem_free(icm[i].icm_dma[j], 3175 nspans * sizeof (hermon_dma_info_t)); 3176 3177 if (icm[i].icm_bitmap[j]) 3178 /* Free the table bitmap */ 3179 kmem_free(icm[i].icm_bitmap[j], 3180 (nspans + 7) / 8); 3181 } 3182 /* Destroy the table lock */ 3183 cv_destroy(&icm[i].icm_table_cv); 3184 mutex_exit(&icm[i].icm_table_lock); 3185 mutex_destroy(&icm[i].icm_table_lock); 3186 } 3187 3188 } 3189 3190 /* 3191 * hermon_icm_dma_init() 3192 * Context: Only called from attach() path context 3193 */ 3194 static int 3195 hermon_icm_dma_init(hermon_state_t *state) 3196 { 3197 hermon_icm_table_t *icm; 3198 hermon_rsrc_type_t type; 3199 int status; 3200 3201 3202 /* 3203 * This routine will allocate initial ICM DMA resources for ICM 3204 * tables that have reserved ICM objects. This is the only routine 3205 * where we should have to allocate ICM outside of hermon_rsrc_alloc(). 3206 * We need to allocate ICM here explicitly, rather than in 3207 * hermon_rsrc_alloc(), because we've not yet completed the resource 3208 * pool initialization. When the resource pools are initialized 3209 * (in hermon_rsrc_init_phase2(), see hermon_rsrc.c for more 3210 * information), resource preallocations will be invoked to match 3211 * the ICM allocations seen here. We will then be able to use the 3212 * normal allocation path. Note we don't need to set a refcnt on 3213 * these initial allocations because that will be done in the calls 3214 * to hermon_rsrc_alloc() from hermon_hw_entries_init() for the 3215 * "prealloc" objects (see hermon_rsrc.c for more information). 3216 */ 3217 for (type = 0; type < HERMON_NUM_ICM_RESOURCES; type++) { 3218 3219 /* ICM for these is allocated within hermon_icm_alloc() */ 3220 switch (type) { 3221 case HERMON_CMPT: 3222 case HERMON_CMPT_QPC: 3223 case HERMON_CMPT_SRQC: 3224 case HERMON_CMPT_CQC: 3225 case HERMON_CMPT_EQC: 3226 case HERMON_AUXC: 3227 case HERMON_ALTC: 3228 case HERMON_RDB: 3229 continue; 3230 } 3231 3232 icm = &state->hs_icm[type]; 3233 3234 mutex_enter(&icm->icm_table_lock); 3235 status = hermon_icm_alloc(state, type, 0, 0); 3236 mutex_exit(&icm->icm_table_lock); 3237 if (status != DDI_SUCCESS) { 3238 while (type--) { 3239 icm = &state->hs_icm[type]; 3240 mutex_enter(&icm->icm_table_lock); 3241 hermon_icm_free(state, type, 0, 0); 3242 mutex_exit(&icm->icm_table_lock); 3243 } 3244 return (DDI_FAILURE); 3245 } 3246 3247 if (hermon_verbose) { 3248 IBTF_DPRINTF_L2("hermon", "hermon_icm_dma_init: " 3249 "table (0x%x) index (0x%x) allocated", type, 0); 3250 } 3251 } 3252 3253 return (DDI_SUCCESS); 3254 } 3255 3256 /* 3257 * hermon_icm_dma_fini() 3258 * Context: Only called from attach() path context 3259 * 3260 * ICM has been completely unmapped. We just free the memory here. 3261 */ 3262 static void 3263 hermon_icm_dma_fini(hermon_state_t *state) 3264 { 3265 hermon_icm_table_t *icm; 3266 hermon_dma_info_t *dma_info; 3267 hermon_rsrc_type_t type; 3268 int index1, index2; 3269 3270 3271 for (type = 0; type < HERMON_NUM_ICM_RESOURCES; type++) { 3272 icm = &state->hs_icm[type]; 3273 for (index1 = 0; index1 < HERMON_ICM_SPLIT; index1++) { 3274 dma_info = icm->icm_dma[index1]; 3275 if (dma_info == NULL) 3276 continue; 3277 for (index2 = 0; index2 < icm->num_spans; index2++) { 3278 if (dma_info[index2].dma_hdl) 3279 hermon_dma_free(&dma_info[index2]); 3280 dma_info[index2].dma_hdl = NULL; 3281 } 3282 } 3283 } 3284 3285 } 3286 3287 /* 3288 * hermon_hca_port_init() 3289 * Context: Only called from attach() path context 3290 */ 3291 static int 3292 hermon_hca_port_init(hermon_state_t *state) 3293 { 3294 hermon_hw_set_port_t *portinits, *initport; 3295 hermon_cfg_profile_t *cfgprof; 3296 uint_t num_ports; 3297 int i = 0, status; 3298 uint64_t maxval, val; 3299 uint64_t sysimgguid, nodeguid, portguid; 3300 3301 3302 cfgprof = state->hs_cfg_profile; 3303 3304 /* Get number of HCA ports */ 3305 num_ports = cfgprof->cp_num_ports; 3306 3307 /* Allocate space for Hermon set port struct(s) */ 3308 portinits = (hermon_hw_set_port_t *)kmem_zalloc(num_ports * 3309 sizeof (hermon_hw_set_port_t), KM_SLEEP); 3310 3311 3312 3313 /* Post commands to initialize each Hermon HCA port */ 3314 /* 3315 * In Hermon, the process is different than in previous HCAs. 3316 * Here, you have to: 3317 * QUERY_PORT - to get basic information from the HCA 3318 * set the fields accordingly 3319 * SET_PORT - to change/set everything as desired 3320 * INIT_PORT - to bring the port up 3321 * 3322 * Needs to be done for each port in turn 3323 */ 3324 3325 for (i = 0; i < num_ports; i++) { 3326 bzero(&state->hs_queryport, sizeof (hermon_hw_query_port_t)); 3327 status = hermon_cmn_query_cmd_post(state, QUERY_PORT, 0, 3328 (i + 1), &state->hs_queryport, 3329 sizeof (hermon_hw_query_port_t), HERMON_CMD_NOSLEEP_SPIN); 3330 if (status != HERMON_CMD_SUCCESS) { 3331 cmn_err(CE_CONT, "Hermon: QUERY_PORT (port %02d) " 3332 "command failed: %08x\n", i + 1, status); 3333 goto init_ports_fail; 3334 } 3335 initport = &portinits[i]; 3336 state->hs_initport = &portinits[i]; 3337 3338 bzero(initport, sizeof (hermon_hw_query_port_t)); 3339 3340 /* 3341 * Determine whether we need to override the firmware's 3342 * default SystemImageGUID setting. 3343 */ 3344 sysimgguid = cfgprof->cp_sysimgguid; 3345 if (sysimgguid != 0) { 3346 initport->sig = 1; 3347 initport->sys_img_guid = sysimgguid; 3348 } 3349 3350 /* 3351 * Determine whether we need to override the firmware's 3352 * default NodeGUID setting. 3353 */ 3354 nodeguid = cfgprof->cp_nodeguid; 3355 if (nodeguid != 0) { 3356 initport->ng = 1; 3357 initport->node_guid = nodeguid; 3358 } 3359 3360 /* 3361 * Determine whether we need to override the firmware's 3362 * default PortGUID setting. 3363 */ 3364 portguid = cfgprof->cp_portguid[i]; 3365 if (portguid != 0) { 3366 initport->g0 = 1; 3367 initport->guid0 = portguid; 3368 } 3369 3370 /* Validate max MTU size */ 3371 maxval = state->hs_queryport.ib_mtu; 3372 val = cfgprof->cp_max_mtu; 3373 if (val > maxval) { 3374 goto init_ports_fail; 3375 } 3376 3377 /* Set mtu_cap to 4096 bytes */ 3378 initport->mmc = 1; /* set the change bit */ 3379 initport->mtu_cap = 5; /* for 4096 bytes */ 3380 3381 /* Validate the max port width */ 3382 maxval = state->hs_queryport.ib_port_wid; 3383 val = cfgprof->cp_max_port_width; 3384 if (val > maxval) { 3385 goto init_ports_fail; 3386 } 3387 3388 /* Validate max VL cap size */ 3389 maxval = state->hs_queryport.max_vl; 3390 val = cfgprof->cp_max_vlcap; 3391 if (val > maxval) { 3392 goto init_ports_fail; 3393 } 3394 3395 /* Since we're doing mtu_cap, cut vl_cap down */ 3396 initport->mvc = 1; /* set this change bit */ 3397 initport->vl_cap = 3; /* 3 means vl0-vl3, 4 total */ 3398 3399 /* Validate max GID table size */ 3400 maxval = ((uint64_t)1 << state->hs_queryport.log_max_gid); 3401 val = ((uint64_t)1 << cfgprof->cp_log_max_gidtbl); 3402 if (val > maxval) { 3403 goto init_ports_fail; 3404 } 3405 initport->max_guid = (uint16_t)val; 3406 initport->mg = 1; 3407 3408 /* Validate max PKey table size */ 3409 maxval = ((uint64_t)1 << state->hs_queryport.log_max_pkey); 3410 val = ((uint64_t)1 << cfgprof->cp_log_max_pkeytbl); 3411 if (val > maxval) { 3412 goto init_ports_fail; 3413 } 3414 initport->max_pkey = (uint16_t)val; 3415 initport->mp = 1; 3416 /* 3417 * Post the SET_PORT cmd to Hermon firmware. This sets 3418 * the parameters of the port. 3419 */ 3420 status = hermon_set_port_cmd_post(state, initport, i + 1, 3421 HERMON_CMD_NOSLEEP_SPIN); 3422 if (status != HERMON_CMD_SUCCESS) { 3423 cmn_err(CE_CONT, "Hermon: SET_PORT (port %02d) command " 3424 "failed: %08x\n", i + 1, status); 3425 goto init_ports_fail; 3426 } 3427 /* issue another SET_PORT cmd - performance fix/workaround */ 3428 /* XXX - need to discuss with Mellanox */ 3429 bzero(initport, sizeof (hermon_hw_query_port_t)); 3430 initport->cap_mask = 0x02500868; 3431 status = hermon_set_port_cmd_post(state, initport, i + 1, 3432 HERMON_CMD_NOSLEEP_SPIN); 3433 if (status != HERMON_CMD_SUCCESS) { 3434 cmn_err(CE_CONT, "Hermon: SET_PORT (port %02d) command " 3435 "failed: %08x\n", i + 1, status); 3436 goto init_ports_fail; 3437 } 3438 } 3439 3440 /* 3441 * Finally, do the INIT_PORT for each port in turn 3442 * When this command completes, the corresponding Hermon port 3443 * will be physically "Up" and initialized. 3444 */ 3445 for (i = 0; i < num_ports; i++) { 3446 status = hermon_init_port_cmd_post(state, i + 1, 3447 HERMON_CMD_NOSLEEP_SPIN); 3448 if (status != HERMON_CMD_SUCCESS) { 3449 cmn_err(CE_CONT, "Hermon: INIT_PORT (port %02d) " 3450 "comman failed: %08x\n", i + 1, status); 3451 goto init_ports_fail; 3452 } 3453 } 3454 3455 /* Free up the memory for Hermon port init struct(s), return success */ 3456 kmem_free(portinits, num_ports * sizeof (hermon_hw_set_port_t)); 3457 return (DDI_SUCCESS); 3458 3459 init_ports_fail: 3460 /* 3461 * Free up the memory for Hermon port init struct(s), shutdown any 3462 * successfully initialized ports, and return failure 3463 */ 3464 kmem_free(portinits, num_ports * sizeof (hermon_hw_set_port_t)); 3465 (void) hermon_hca_ports_shutdown(state, i); 3466 3467 return (DDI_FAILURE); 3468 } 3469 3470 3471 /* 3472 * hermon_hca_ports_shutdown() 3473 * Context: Only called from attach() and/or detach() path contexts 3474 */ 3475 static int 3476 hermon_hca_ports_shutdown(hermon_state_t *state, uint_t num_init) 3477 { 3478 int i, status; 3479 3480 /* 3481 * Post commands to shutdown all init'd Hermon HCA ports. Note: if 3482 * any of these commands fail for any reason, it would be entirely 3483 * unexpected and probably indicative a serious problem (HW or SW). 3484 * Although we do return void from this function, this type of failure 3485 * should not go unreported. That is why we have the warning message. 3486 */ 3487 for (i = 0; i < num_init; i++) { 3488 status = hermon_close_port_cmd_post(state, i + 1, 3489 HERMON_CMD_NOSLEEP_SPIN); 3490 if (status != HERMON_CMD_SUCCESS) { 3491 HERMON_WARNING(state, "failed to shutdown HCA port"); 3492 return (status); 3493 } 3494 } 3495 return (HERMON_CMD_SUCCESS); 3496 } 3497 3498 3499 /* 3500 * hermon_internal_uarpg_init 3501 * Context: Only called from attach() path context 3502 */ 3503 static int 3504 hermon_internal_uarpg_init(hermon_state_t *state) 3505 { 3506 int status; 3507 hermon_dbr_info_t *info; 3508 3509 /* 3510 * Allocate the UAR page for kernel use. This UAR page is 3511 * the privileged UAR page through which all kernel generated 3512 * doorbells will be rung. There are a number of UAR pages 3513 * reserved by hardware at the front of the UAR BAR, indicated 3514 * by DEVCAP.num_rsvd_uar, which we have already allocated. So, 3515 * the kernel page, or UAR page index num_rsvd_uar, will be 3516 * allocated here for kernel use. 3517 */ 3518 3519 status = hermon_rsrc_alloc(state, HERMON_UARPG, 1, HERMON_SLEEP, 3520 &state->hs_uarkpg_rsrc); 3521 if (status != DDI_SUCCESS) { 3522 return (DDI_FAILURE); 3523 } 3524 3525 /* Setup pointer to kernel UAR page */ 3526 state->hs_uar = (hermon_hw_uar_t *)state->hs_uarkpg_rsrc->hr_addr; 3527 3528 /* need to set up DBr tracking as well */ 3529 status = hermon_dbr_page_alloc(state, &info); 3530 if (status != DDI_SUCCESS) { 3531 return (DDI_FAILURE); 3532 } 3533 state->hs_kern_dbr = info; 3534 return (DDI_SUCCESS); 3535 } 3536 3537 3538 /* 3539 * hermon_internal_uarpg_fini 3540 * Context: Only called from attach() and/or detach() path contexts 3541 */ 3542 static void 3543 hermon_internal_uarpg_fini(hermon_state_t *state) 3544 { 3545 /* Free up Hermon UAR page #1 (kernel driver doorbells) */ 3546 hermon_rsrc_free(state, &state->hs_uarkpg_rsrc); 3547 } 3548 3549 3550 /* 3551 * hermon_special_qp_contexts_reserve() 3552 * Context: Only called from attach() path context 3553 */ 3554 static int 3555 hermon_special_qp_contexts_reserve(hermon_state_t *state) 3556 { 3557 hermon_rsrc_t *qp0_rsrc, *qp1_rsrc, *qp_resvd; 3558 int status; 3559 3560 /* Initialize the lock used for special QP rsrc management */ 3561 mutex_init(&state->hs_spec_qplock, NULL, MUTEX_DRIVER, 3562 DDI_INTR_PRI(state->hs_intrmsi_pri)); 3563 3564 /* 3565 * Reserve contexts for QP0. These QP contexts will be setup to 3566 * act as aliases for the real QP0. Note: We are required to grab 3567 * two QPs (one per port) even if we are operating in single-port 3568 * mode. 3569 */ 3570 status = hermon_rsrc_alloc(state, HERMON_QPC, 2, 3571 HERMON_SLEEP, &qp0_rsrc); 3572 if (status != DDI_SUCCESS) { 3573 mutex_destroy(&state->hs_spec_qplock); 3574 return (DDI_FAILURE); 3575 } 3576 state->hs_spec_qp0 = qp0_rsrc; 3577 3578 /* 3579 * Reserve contexts for QP1. These QP contexts will be setup to 3580 * act as aliases for the real QP1. Note: We are required to grab 3581 * two QPs (one per port) even if we are operating in single-port 3582 * mode. 3583 */ 3584 status = hermon_rsrc_alloc(state, HERMON_QPC, 2, 3585 HERMON_SLEEP, &qp1_rsrc); 3586 if (status != DDI_SUCCESS) { 3587 hermon_rsrc_free(state, &qp0_rsrc); 3588 mutex_destroy(&state->hs_spec_qplock); 3589 return (DDI_FAILURE); 3590 } 3591 state->hs_spec_qp1 = qp1_rsrc; 3592 3593 status = hermon_rsrc_alloc(state, HERMON_QPC, 4, 3594 HERMON_SLEEP, &qp_resvd); 3595 if (status != DDI_SUCCESS) { 3596 hermon_rsrc_free(state, &qp1_rsrc); 3597 hermon_rsrc_free(state, &qp0_rsrc); 3598 mutex_destroy(&state->hs_spec_qplock); 3599 return (DDI_FAILURE); 3600 } 3601 state->hs_spec_qp_unused = qp_resvd; 3602 3603 return (DDI_SUCCESS); 3604 } 3605 3606 3607 /* 3608 * hermon_special_qp_contexts_unreserve() 3609 * Context: Only called from attach() and/or detach() path contexts 3610 */ 3611 static void 3612 hermon_special_qp_contexts_unreserve(hermon_state_t *state) 3613 { 3614 3615 /* Unreserve contexts for spec_qp_unused */ 3616 hermon_rsrc_free(state, &state->hs_spec_qp_unused); 3617 3618 /* Unreserve contexts for QP1 */ 3619 hermon_rsrc_free(state, &state->hs_spec_qp1); 3620 3621 /* Unreserve contexts for QP0 */ 3622 hermon_rsrc_free(state, &state->hs_spec_qp0); 3623 3624 /* Destroy the lock used for special QP rsrc management */ 3625 mutex_destroy(&state->hs_spec_qplock); 3626 3627 } 3628 3629 3630 /* 3631 * hermon_sw_reset() 3632 * Context: Currently called only from attach() path context 3633 */ 3634 static int 3635 hermon_sw_reset(hermon_state_t *state) 3636 { 3637 ddi_acc_handle_t hdl = hermon_get_pcihdl(state); 3638 ddi_acc_handle_t cmdhdl = hermon_get_cmdhdl(state); 3639 uint32_t reset_delay; 3640 int status, i; 3641 uint32_t sem; 3642 uint_t offset; 3643 uint32_t data32; /* for devctl & linkctl */ 3644 int loopcnt; 3645 3646 /* initialize the FMA retry loop */ 3647 hermon_pio_init(fm_loop_cnt, fm_status, fm_test); 3648 hermon_pio_init(fm_loop_cnt2, fm_status2, fm_test2); 3649 3650 /* 3651 * If the configured software reset delay is set to zero, then we 3652 * will not attempt a software reset of the Hermon device. 3653 */ 3654 reset_delay = state->hs_cfg_profile->cp_sw_reset_delay; 3655 if (reset_delay == 0) { 3656 return (DDI_SUCCESS); 3657 } 3658 3659 /* the FMA retry loop starts. */ 3660 hermon_pio_start(state, cmdhdl, pio_error, fm_loop_cnt, fm_status, 3661 fm_test); 3662 hermon_pio_start(state, hdl, pio_error2, fm_loop_cnt2, fm_status2, 3663 fm_test2); 3664 3665 /* Query the PCI capabilities of the HCA device */ 3666 /* but don't process the VPD until after reset */ 3667 status = hermon_pci_capability_list(state, hdl); 3668 if (status != DDI_SUCCESS) { 3669 cmn_err(CE_NOTE, "failed to get pci capabilities list(0x%x)\n", 3670 status); 3671 return (DDI_FAILURE); 3672 } 3673 3674 /* 3675 * Read all PCI config info (reg0...reg63). Note: According to the 3676 * Hermon software reset application note, we should not read or 3677 * restore the values in reg22 and reg23. 3678 * NOTE: For Hermon (and Arbel too) it says to restore the command 3679 * register LAST, and technically, you need to restore the 3680 * PCIE Capability "device control" and "link control" (word-sized, 3681 * at offsets 0x08 and 0x10 from the capbility ID respectively). 3682 * We hold off restoring the command register - offset 0x4 - till last 3683 */ 3684 3685 /* 1st, wait for the semaphore assure accessibility - per PRM */ 3686 status = -1; 3687 for (i = 0; i < NANOSEC/MICROSEC /* 1sec timeout */; i++) { 3688 sem = ddi_get32(cmdhdl, state->hs_cmd_regs.sw_semaphore); 3689 if (sem == 0) { 3690 status = 0; 3691 break; 3692 } 3693 drv_usecwait(1); 3694 } 3695 3696 /* Check if timeout happens */ 3697 if (status == -1) { 3698 /* 3699 * Remove this acc handle from Hermon, then log 3700 * the error. 3701 */ 3702 hermon_pci_config_teardown(state, &hdl); 3703 3704 cmn_err(CE_WARN, "hermon_sw_reset timeout: " 3705 "failed to get the semaphore(0x%p)\n", 3706 (void *)state->hs_cmd_regs.sw_semaphore); 3707 3708 hermon_fm_ereport(state, HCA_IBA_ERR, HCA_ERR_NON_FATAL); 3709 return (DDI_FAILURE); 3710 } 3711 3712 for (i = 0; i < HERMON_SW_RESET_NUMREGS; i++) { 3713 if ((i != HERMON_SW_RESET_REG22_RSVD) && 3714 (i != HERMON_SW_RESET_REG23_RSVD)) { 3715 state->hs_cfg_data[i] = pci_config_get32(hdl, i << 2); 3716 } 3717 } 3718 3719 /* 3720 * Perform the software reset (by writing 1 at offset 0xF0010) 3721 */ 3722 ddi_put32(cmdhdl, state->hs_cmd_regs.sw_reset, HERMON_SW_RESET_START); 3723 3724 /* 3725 * This delay is required so as not to cause a panic here. If the 3726 * device is accessed too soon after reset it will not respond to 3727 * config cycles, causing a Master Abort and panic. 3728 */ 3729 drv_usecwait(reset_delay); 3730 3731 /* 3732 * Poll waiting for the device to finish resetting. 3733 */ 3734 loopcnt = 100; /* 100 times @ 100 usec - total delay 10 msec */ 3735 while ((pci_config_get32(hdl, 0) & 0x0000FFFF) != PCI_VENID_MLX) { 3736 drv_usecwait(HERMON_SW_RESET_POLL_DELAY); 3737 if (--loopcnt == 0) 3738 break; /* just in case, break and go on */ 3739 } 3740 if (loopcnt == 0) 3741 cmn_err(CE_CONT, "!Never see VEND_ID - read == %X", 3742 pci_config_get32(hdl, 0)); 3743 3744 /* 3745 * Restore the config info 3746 */ 3747 for (i = 0; i < HERMON_SW_RESET_NUMREGS; i++) { 3748 if (i == 1) continue; /* skip the status/ctrl reg */ 3749 if ((i != HERMON_SW_RESET_REG22_RSVD) && 3750 (i != HERMON_SW_RESET_REG23_RSVD)) { 3751 pci_config_put32(hdl, i << 2, state->hs_cfg_data[i]); 3752 } 3753 } 3754 3755 /* 3756 * PCI Express Capability - we saved during capability list, and 3757 * we'll restore them here. 3758 */ 3759 offset = state->hs_pci_cap_offset; 3760 data32 = state->hs_pci_cap_devctl; 3761 pci_config_put32(hdl, offset + HERMON_PCI_CAP_DEV_OFFS, data32); 3762 data32 = state->hs_pci_cap_lnkctl; 3763 pci_config_put32(hdl, offset + HERMON_PCI_CAP_LNK_OFFS, data32); 3764 3765 pci_config_put32(hdl, 0x04, (state->hs_cfg_data[1] | 0x0006)); 3766 3767 /* the FMA retry loop ends. */ 3768 hermon_pio_end(state, hdl, pio_error2, fm_loop_cnt2, fm_status2, 3769 fm_test2); 3770 hermon_pio_end(state, cmdhdl, pio_error, fm_loop_cnt, fm_status, 3771 fm_test); 3772 3773 return (DDI_SUCCESS); 3774 3775 pio_error2: 3776 /* fall through */ 3777 pio_error: 3778 hermon_fm_ereport(state, HCA_SYS_ERR, HCA_ERR_NON_FATAL); 3779 return (DDI_FAILURE); 3780 } 3781 3782 3783 /* 3784 * hermon_mcg_init() 3785 * Context: Only called from attach() path context 3786 */ 3787 static int 3788 hermon_mcg_init(hermon_state_t *state) 3789 { 3790 uint_t mcg_tmp_sz; 3791 3792 3793 /* 3794 * Allocate space for the MCG temporary copy buffer. This is 3795 * used by the Attach/Detach Multicast Group code 3796 */ 3797 mcg_tmp_sz = HERMON_MCGMEM_SZ(state); 3798 state->hs_mcgtmp = kmem_zalloc(mcg_tmp_sz, KM_SLEEP); 3799 3800 /* 3801 * Initialize the multicast group mutex. This ensures atomic 3802 * access to add, modify, and remove entries in the multicast 3803 * group hash lists. 3804 */ 3805 mutex_init(&state->hs_mcglock, NULL, MUTEX_DRIVER, 3806 DDI_INTR_PRI(state->hs_intrmsi_pri)); 3807 3808 return (DDI_SUCCESS); 3809 } 3810 3811 3812 /* 3813 * hermon_mcg_fini() 3814 * Context: Only called from attach() and/or detach() path contexts 3815 */ 3816 static void 3817 hermon_mcg_fini(hermon_state_t *state) 3818 { 3819 uint_t mcg_tmp_sz; 3820 3821 3822 /* Free up the space used for the MCG temporary copy buffer */ 3823 mcg_tmp_sz = HERMON_MCGMEM_SZ(state); 3824 kmem_free(state->hs_mcgtmp, mcg_tmp_sz); 3825 3826 /* Destroy the multicast group mutex */ 3827 mutex_destroy(&state->hs_mcglock); 3828 3829 } 3830 3831 3832 /* 3833 * hermon_fw_version_check() 3834 * Context: Only called from attach() path context 3835 */ 3836 static int 3837 hermon_fw_version_check(hermon_state_t *state) 3838 { 3839 3840 uint_t hermon_fw_ver_major; 3841 uint_t hermon_fw_ver_minor; 3842 uint_t hermon_fw_ver_subminor; 3843 3844 #ifdef FMA_TEST 3845 if (hermon_test_num == -1) { 3846 return (DDI_FAILURE); 3847 } 3848 #endif 3849 3850 /* 3851 * Depending on which version of driver we have attached, and which 3852 * HCA we've attached, the firmware version checks will be different. 3853 * We set up the comparison values for both Arbel and Sinai HCAs. 3854 */ 3855 switch (state->hs_operational_mode) { 3856 case HERMON_HCA_MODE: 3857 hermon_fw_ver_major = HERMON_FW_VER_MAJOR; 3858 hermon_fw_ver_minor = HERMON_FW_VER_MINOR; 3859 hermon_fw_ver_subminor = HERMON_FW_VER_SUBMINOR; 3860 break; 3861 3862 default: 3863 return (DDI_FAILURE); 3864 } 3865 3866 /* 3867 * If FW revision major number is less than acceptable, 3868 * return failure, else if greater return success. If 3869 * the major numbers are equal than check the minor number 3870 */ 3871 if (state->hs_fw.fw_rev_major < hermon_fw_ver_major) { 3872 return (DDI_FAILURE); 3873 } else if (state->hs_fw.fw_rev_major > hermon_fw_ver_major) { 3874 return (DDI_SUCCESS); 3875 } 3876 3877 /* 3878 * Do the same check as above, except for minor revision numbers 3879 * If the minor numbers are equal than check the subminor number 3880 */ 3881 if (state->hs_fw.fw_rev_minor < hermon_fw_ver_minor) { 3882 return (DDI_FAILURE); 3883 } else if (state->hs_fw.fw_rev_minor > hermon_fw_ver_minor) { 3884 return (DDI_SUCCESS); 3885 } 3886 3887 /* 3888 * Once again we do the same check as above, except for the subminor 3889 * revision number. If the subminor numbers are equal here, then 3890 * these are the same firmware version, return success 3891 */ 3892 if (state->hs_fw.fw_rev_subminor < hermon_fw_ver_subminor) { 3893 return (DDI_FAILURE); 3894 } else if (state->hs_fw.fw_rev_subminor > hermon_fw_ver_subminor) { 3895 return (DDI_SUCCESS); 3896 } 3897 3898 return (DDI_SUCCESS); 3899 } 3900 3901 3902 /* 3903 * hermon_device_info_report() 3904 * Context: Only called from attach() path context 3905 */ 3906 static void 3907 hermon_device_info_report(hermon_state_t *state) 3908 { 3909 3910 cmn_err(CE_CONT, "?hermon%d: FW ver: %04d.%04d.%04d, " 3911 "HW rev: %02d\n", state->hs_instance, state->hs_fw.fw_rev_major, 3912 state->hs_fw.fw_rev_minor, state->hs_fw.fw_rev_subminor, 3913 state->hs_revision_id); 3914 cmn_err(CE_CONT, "?hermon%d: %64s (0x%016" PRIx64 ")\n", 3915 state->hs_instance, state->hs_nodedesc, state->hs_nodeguid); 3916 3917 } 3918 3919 3920 /* 3921 * hermon_pci_capability_list() 3922 * Context: Only called from attach() path context 3923 */ 3924 static int 3925 hermon_pci_capability_list(hermon_state_t *state, ddi_acc_handle_t hdl) 3926 { 3927 uint_t offset, data; 3928 uint32_t data32; 3929 3930 state->hs_pci_cap_offset = 0; /* make sure it's cleared */ 3931 3932 /* 3933 * Check for the "PCI Capabilities" bit in the "Status Register". 3934 * Bit 4 in this register indicates the presence of a "PCI 3935 * Capabilities" list. 3936 * 3937 * PCI-Express requires this bit to be set to 1. 3938 */ 3939 data = pci_config_get16(hdl, 0x06); 3940 if ((data & 0x10) == 0) { 3941 return (DDI_FAILURE); 3942 } 3943 3944 /* 3945 * Starting from offset 0x34 in PCI config space, find the 3946 * head of "PCI capabilities" list, and walk the list. If 3947 * capabilities of a known type are encountered (e.g. 3948 * "PCI-X Capability"), then call the appropriate handler 3949 * function. 3950 */ 3951 offset = pci_config_get8(hdl, 0x34); 3952 while (offset != 0x0) { 3953 data = pci_config_get8(hdl, offset); 3954 /* 3955 * Check for known capability types. Hermon has the 3956 * following: 3957 * o Power Mgmt (0x02) 3958 * o VPD Capability (0x03) 3959 * o PCI-E Capability (0x10) 3960 * o MSIX Capability (0x11) 3961 */ 3962 switch (data) { 3963 case 0x01: 3964 /* power mgmt handling */ 3965 break; 3966 case 0x03: 3967 3968 /* 3969 * Reading the PCIe VPD is inconsistent - that is, sometimes causes 3970 * problems on (mostly) X64, though we've also seen problems w/ Sparc 3971 * and Tavor --- so, for now until it's root caused, don't try and 3972 * read it 3973 */ 3974 #ifdef HERMON_VPD_WORKS 3975 hermon_pci_capability_vpd(state, hdl, offset); 3976 #else 3977 delay(100); 3978 hermon_pci_capability_vpd(state, hdl, offset); 3979 #endif 3980 break; 3981 case 0x10: 3982 /* 3983 * PCI Express Capability - save offset & contents 3984 * for later in reset 3985 */ 3986 state->hs_pci_cap_offset = offset; 3987 data32 = pci_config_get32(hdl, 3988 offset + HERMON_PCI_CAP_DEV_OFFS); 3989 state->hs_pci_cap_devctl = data32; 3990 data32 = pci_config_get32(hdl, 3991 offset + HERMON_PCI_CAP_LNK_OFFS); 3992 state->hs_pci_cap_lnkctl = data32; 3993 break; 3994 case 0x11: 3995 /* 3996 * MSIX support - nothing to do, taken care of in the 3997 * MSI/MSIX interrupt frameworkd 3998 */ 3999 break; 4000 default: 4001 /* just go on to the next */ 4002 break; 4003 } 4004 4005 /* Get offset of next entry in list */ 4006 offset = pci_config_get8(hdl, offset + 1); 4007 } 4008 4009 return (DDI_SUCCESS); 4010 } 4011 4012 /* 4013 * hermon_pci_read_vpd() 4014 * Context: Only called from attach() path context 4015 * utility routine for hermon_pci_capability_vpd() 4016 */ 4017 static int 4018 hermon_pci_read_vpd(ddi_acc_handle_t hdl, uint_t offset, uint32_t addr, 4019 uint32_t *data) 4020 { 4021 int retry = 40; /* retry counter for EEPROM poll */ 4022 uint32_t val; 4023 int vpd_addr = offset + 2; 4024 int vpd_data = offset + 4; 4025 4026 /* 4027 * In order to read a 32-bit value from VPD, we are to write down 4028 * the address (offset in the VPD itself) to the address register. 4029 * To signal the read, we also clear bit 31. We then poll on bit 31 4030 * and when it is set, we can then read our 4 bytes from the data 4031 * register. 4032 */ 4033 (void) pci_config_put32(hdl, offset, addr << 16); 4034 do { 4035 drv_usecwait(1000); 4036 val = pci_config_get16(hdl, vpd_addr); 4037 if (val & 0x8000) { /* flag bit set */ 4038 *data = pci_config_get32(hdl, vpd_data); 4039 return (DDI_SUCCESS); 4040 } 4041 } while (--retry); 4042 /* read of flag failed write one message but count the failures */ 4043 if (debug_vpd == 0) 4044 cmn_err(CE_NOTE, 4045 "!Failed to see flag bit after VPD addr write\n"); 4046 debug_vpd++; 4047 4048 4049 vpd_read_fail: 4050 return (DDI_FAILURE); 4051 } 4052 4053 4054 4055 /* 4056 * hermon_pci_capability_vpd() 4057 * Context: Only called from attach() path context 4058 */ 4059 static void 4060 hermon_pci_capability_vpd(hermon_state_t *state, ddi_acc_handle_t hdl, 4061 uint_t offset) 4062 { 4063 uint8_t name_length; 4064 uint8_t pn_length; 4065 int i, err = 0; 4066 int vpd_str_id = 0; 4067 int vpd_ro_desc; 4068 int vpd_ro_pn_desc; 4069 #ifdef _BIG_ENDIAN 4070 uint32_t data32; 4071 #endif /* _BIG_ENDIAN */ 4072 union { 4073 uint32_t vpd_int[HERMON_VPD_HDR_DWSIZE]; 4074 uchar_t vpd_char[HERMON_VPD_HDR_BSIZE]; 4075 } vpd; 4076 4077 4078 /* 4079 * Read in the Vital Product Data (VPD) to the extend needed 4080 * by the fwflash utility 4081 */ 4082 for (i = 0; i < HERMON_VPD_HDR_DWSIZE; i++) { 4083 err = hermon_pci_read_vpd(hdl, offset, i << 2, &vpd.vpd_int[i]); 4084 if (err != DDI_SUCCESS) { 4085 cmn_err(CE_NOTE, "!VPD read failed\n"); 4086 goto out; 4087 } 4088 } 4089 4090 #ifdef _BIG_ENDIAN 4091 /* Need to swap bytes for big endian. */ 4092 for (i = 0; i < HERMON_VPD_HDR_DWSIZE; i++) { 4093 data32 = vpd.vpd_int[i]; 4094 vpd.vpd_char[(i << 2) + 3] = 4095 (uchar_t)((data32 & 0xFF000000) >> 24); 4096 vpd.vpd_char[(i << 2) + 2] = 4097 (uchar_t)((data32 & 0x00FF0000) >> 16); 4098 vpd.vpd_char[(i << 2) + 1] = 4099 (uchar_t)((data32 & 0x0000FF00) >> 8); 4100 vpd.vpd_char[i << 2] = (uchar_t)(data32 & 0x000000FF); 4101 } 4102 #endif /* _BIG_ENDIAN */ 4103 4104 /* Check for VPD String ID Tag */ 4105 if (vpd.vpd_char[vpd_str_id] == 0x82) { 4106 /* get the product name */ 4107 name_length = (uint8_t)vpd.vpd_char[vpd_str_id + 1]; 4108 if (name_length > sizeof (state->hs_hca_name)) { 4109 cmn_err(CE_NOTE, "!VPD name too large (0x%x)\n", 4110 name_length); 4111 goto out; 4112 } 4113 (void) memcpy(state->hs_hca_name, &vpd.vpd_char[vpd_str_id + 3], 4114 name_length); 4115 state->hs_hca_name[name_length] = 0; 4116 4117 /* get the part number */ 4118 vpd_ro_desc = name_length + 3; /* read-only tag location */ 4119 vpd_ro_pn_desc = vpd_ro_desc + 3; /* P/N keyword location */ 4120 4121 /* Verify read-only tag and Part Number keyword. */ 4122 if (vpd.vpd_char[vpd_ro_desc] != 0x90 || 4123 (vpd.vpd_char[vpd_ro_pn_desc] != 'P' && 4124 vpd.vpd_char[vpd_ro_pn_desc + 1] != 'N')) { 4125 cmn_err(CE_NOTE, "!VPD Part Number not found\n"); 4126 goto out; 4127 } 4128 4129 pn_length = (uint8_t)vpd.vpd_char[vpd_ro_pn_desc + 2]; 4130 if (pn_length > sizeof (state->hs_hca_pn)) { 4131 cmn_err(CE_NOTE, "!VPD part number too large (0x%x)\n", 4132 name_length); 4133 goto out; 4134 } 4135 (void) memcpy(state->hs_hca_pn, 4136 &vpd.vpd_char[vpd_ro_pn_desc + 3], 4137 pn_length); 4138 state->hs_hca_pn[pn_length] = 0; 4139 state->hs_hca_pn_len = pn_length; 4140 cmn_err(CE_CONT, "!vpd %s\n", state->hs_hca_pn); 4141 } else { 4142 /* Wrong VPD String ID Tag */ 4143 cmn_err(CE_NOTE, "!VPD String ID Tag not found, tag: %02x\n", 4144 vpd.vpd_char[0]); 4145 goto out; 4146 } 4147 return; 4148 out: 4149 state->hs_hca_pn_len = 0; 4150 } 4151 4152 4153 4154 /* 4155 * hermon_intr_or_msi_init() 4156 * Context: Only called from attach() path context 4157 */ 4158 static int 4159 hermon_intr_or_msi_init(hermon_state_t *state) 4160 { 4161 int status; 4162 4163 4164 /* Query for the list of supported interrupt event types */ 4165 status = ddi_intr_get_supported_types(state->hs_dip, 4166 &state->hs_intr_types_avail); 4167 if (status != DDI_SUCCESS) { 4168 return (DDI_FAILURE); 4169 } 4170 4171 /* 4172 * If Hermon supports MSI-X in this system (and, if it 4173 * hasn't been overridden by a configuration variable), then 4174 * the default behavior is to use a single MSI-X. Otherwise, 4175 * fallback to using legacy interrupts. Also, if MSI-X is chosen, 4176 * but fails for whatever reasons, then next try MSI 4177 */ 4178 if ((state->hs_cfg_profile->cp_use_msi_if_avail != 0) && 4179 (state->hs_intr_types_avail & DDI_INTR_TYPE_MSIX)) { 4180 status = hermon_add_intrs(state, DDI_INTR_TYPE_MSIX); 4181 if (status == DDI_SUCCESS) { 4182 state->hs_intr_type_chosen = DDI_INTR_TYPE_MSIX; 4183 return (DDI_SUCCESS); 4184 } 4185 } 4186 4187 /* 4188 * If Hermon supports MSI in this system (and, if it 4189 * hasn't been overridden by a configuration variable), then 4190 * the default behavior is to use a single MSIX. Otherwise, 4191 * fallback to using legacy interrupts. Also, if MSI is chosen, 4192 * but fails for whatever reasons, then fallback to using legacy 4193 * interrupts. 4194 */ 4195 if ((state->hs_cfg_profile->cp_use_msi_if_avail != 0) && 4196 (state->hs_intr_types_avail & DDI_INTR_TYPE_MSI)) { 4197 status = hermon_add_intrs(state, DDI_INTR_TYPE_MSI); 4198 if (status == DDI_SUCCESS) { 4199 state->hs_intr_type_chosen = DDI_INTR_TYPE_MSI; 4200 return (DDI_SUCCESS); 4201 } 4202 } 4203 4204 /* 4205 * MSI interrupt allocation failed, or was not available. Fallback to 4206 * legacy interrupt support. 4207 */ 4208 if (state->hs_intr_types_avail & DDI_INTR_TYPE_FIXED) { 4209 status = hermon_add_intrs(state, DDI_INTR_TYPE_FIXED); 4210 if (status == DDI_SUCCESS) { 4211 state->hs_intr_type_chosen = DDI_INTR_TYPE_FIXED; 4212 return (DDI_SUCCESS); 4213 } 4214 } 4215 4216 /* 4217 * None of MSI, MSI-X, nor legacy interrupts were successful. 4218 * Return failure. 4219 */ 4220 return (DDI_FAILURE); 4221 } 4222 4223 /* 4224 * hermon_add_intrs() 4225 * Context: Only called from attach() patch context 4226 */ 4227 static int 4228 hermon_add_intrs(hermon_state_t *state, int intr_type) 4229 { 4230 int status; 4231 4232 4233 /* Get number of interrupts/MSI supported */ 4234 status = ddi_intr_get_nintrs(state->hs_dip, intr_type, 4235 &state->hs_intrmsi_count); 4236 if (status != DDI_SUCCESS) { 4237 return (DDI_FAILURE); 4238 } 4239 4240 /* Get number of available interrupts/MSI */ 4241 status = ddi_intr_get_navail(state->hs_dip, intr_type, 4242 &state->hs_intrmsi_avail); 4243 if (status != DDI_SUCCESS) { 4244 return (DDI_FAILURE); 4245 } 4246 4247 /* Ensure that we have at least one (1) usable MSI or interrupt */ 4248 if ((state->hs_intrmsi_avail < 1) || (state->hs_intrmsi_count < 1)) { 4249 return (DDI_FAILURE); 4250 } 4251 4252 /* Attempt to allocate the maximum #interrupt/MSI handles */ 4253 status = ddi_intr_alloc(state->hs_dip, &state->hs_intrmsi_hdl[0], 4254 intr_type, 0, min(HERMON_MSIX_MAX, state->hs_intrmsi_avail), 4255 &state->hs_intrmsi_allocd, DDI_INTR_ALLOC_NORMAL); 4256 if (status != DDI_SUCCESS) { 4257 return (DDI_FAILURE); 4258 } 4259 4260 /* Ensure that we have allocated at least one (1) MSI or interrupt */ 4261 if (state->hs_intrmsi_allocd < 1) { 4262 return (DDI_FAILURE); 4263 } 4264 state->hs_eq_dist = state->hs_intrmsi_allocd - 1; /* start at 0 */ 4265 4266 /* 4267 * Extract the priority for the allocated interrupt/MSI. This 4268 * will be used later when initializing certain mutexes. 4269 */ 4270 status = ddi_intr_get_pri(state->hs_intrmsi_hdl[0], 4271 &state->hs_intrmsi_pri); 4272 if (status != DDI_SUCCESS) { 4273 /* Free the allocated interrupt/MSI handle */ 4274 (void) ddi_intr_free(state->hs_intrmsi_hdl[0]); 4275 4276 return (DDI_FAILURE); 4277 } 4278 4279 /* Make sure the interrupt/MSI priority is below 'high level' */ 4280 if (state->hs_intrmsi_pri >= ddi_intr_get_hilevel_pri()) { 4281 /* Free the allocated interrupt/MSI handle */ 4282 (void) ddi_intr_free(state->hs_intrmsi_hdl[0]); 4283 4284 return (DDI_FAILURE); 4285 } 4286 4287 /* Get add'l capability information regarding interrupt/MSI */ 4288 status = ddi_intr_get_cap(state->hs_intrmsi_hdl[0], 4289 &state->hs_intrmsi_cap); 4290 if (status != DDI_SUCCESS) { 4291 /* Free the allocated interrupt/MSI handle */ 4292 (void) ddi_intr_free(state->hs_intrmsi_hdl[0]); 4293 4294 return (DDI_FAILURE); 4295 } 4296 4297 return (DDI_SUCCESS); 4298 } 4299 4300 4301 /* 4302 * hermon_intr_or_msi_fini() 4303 * Context: Only called from attach() and/or detach() path contexts 4304 */ 4305 static int 4306 hermon_intr_or_msi_fini(hermon_state_t *state) 4307 { 4308 int status; 4309 int intr; 4310 4311 for (intr = 0; intr < state->hs_intrmsi_allocd; intr++) { 4312 4313 /* Free the allocated interrupt/MSI handle */ 4314 status = ddi_intr_free(state->hs_intrmsi_hdl[intr]); 4315 if (status != DDI_SUCCESS) { 4316 return (DDI_FAILURE); 4317 } 4318 } 4319 return (DDI_SUCCESS); 4320 } 4321 4322 4323 /*ARGSUSED*/ 4324 void 4325 hermon_pci_capability_msix(hermon_state_t *state, ddi_acc_handle_t hdl, 4326 uint_t offset) 4327 { 4328 uint32_t msix_data; 4329 uint16_t msg_cntr; 4330 uint32_t t_offset; /* table offset */ 4331 uint32_t t_bir; 4332 uint32_t p_offset; /* pba */ 4333 uint32_t p_bir; 4334 int t_size; /* size in entries - each is 4 dwords */ 4335 4336 /* come in with offset pointing at the capability structure */ 4337 4338 msix_data = pci_config_get32(hdl, offset); 4339 cmn_err(CE_CONT, "Full cap structure dword = %X\n", msix_data); 4340 msg_cntr = pci_config_get16(hdl, offset+2); 4341 cmn_err(CE_CONT, "MSIX msg_control = %X\n", msg_cntr); 4342 offset += 4; 4343 msix_data = pci_config_get32(hdl, offset); /* table info */ 4344 t_offset = (msix_data & 0xFFF8) >> 3; 4345 t_bir = msix_data & 0x07; 4346 offset += 4; 4347 cmn_err(CE_CONT, " table %X --offset = %X, bir(bar) = %X\n", 4348 msix_data, t_offset, t_bir); 4349 msix_data = pci_config_get32(hdl, offset); /* PBA info */ 4350 p_offset = (msix_data & 0xFFF8) >> 3; 4351 p_bir = msix_data & 0x07; 4352 4353 cmn_err(CE_CONT, " PBA %X --offset = %X, bir(bar) = %X\n", 4354 msix_data, p_offset, p_bir); 4355 t_size = msg_cntr & 0x7FF; /* low eleven bits */ 4356 cmn_err(CE_CONT, " table size = %X entries\n", t_size); 4357 4358 offset = t_offset; /* reuse this for offset from BAR */ 4359 #ifdef HERMON_SUPPORTS_MSIX_BAR 4360 cmn_err(CE_CONT, "First 2 table entries behind BAR2 \n"); 4361 for (i = 0; i < 2; i++) { 4362 for (j = 0; j < 4; j++, offset += 4) { 4363 msix_data = ddi_get32(state->hs_reg_msihdl, 4364 (uint32_t *)((uintptr_t)state->hs_reg_msi_baseaddr 4365 + offset)); 4366 cmn_err(CE_CONT, "MSI table entry %d, dword %d == %X\n", 4367 i, j, msix_data); 4368 } 4369 } 4370 #endif 4371 4372 } 4373 4374 /* 4375 * X86 fastreboot support functions. 4376 * These functions are used to save/restore MSI-X table/PBA and also 4377 * to disable MSI-X interrupts in hermon_quiesce(). 4378 */ 4379 4380 /* Return the message control for MSI-X */ 4381 static ushort_t 4382 get_msix_ctrl(dev_info_t *dip) 4383 { 4384 ushort_t msix_ctrl = 0, caps_ctrl = 0; 4385 hermon_state_t *state = ddi_get_soft_state(hermon_statep, 4386 DEVI(dip)->devi_instance); 4387 ddi_acc_handle_t pci_cfg_hdl = hermon_get_pcihdl(state); 4388 ASSERT(pci_cfg_hdl != NULL); 4389 4390 if ((PCI_CAP_LOCATE(pci_cfg_hdl, 4391 PCI_CAP_ID_MSI_X, &caps_ctrl) == DDI_SUCCESS)) { 4392 if ((msix_ctrl = PCI_CAP_GET16(pci_cfg_hdl, NULL, caps_ctrl, 4393 PCI_MSIX_CTRL)) == PCI_CAP_EINVAL16) 4394 return (0); 4395 } 4396 ASSERT(msix_ctrl != 0); 4397 4398 return (msix_ctrl); 4399 } 4400 4401 /* Return the MSI-X table size */ 4402 static size_t 4403 get_msix_tbl_size(dev_info_t *dip) 4404 { 4405 ushort_t msix_ctrl = get_msix_ctrl(dip); 4406 ASSERT(msix_ctrl != 0); 4407 4408 return (((msix_ctrl & PCI_MSIX_TBL_SIZE_MASK) + 1) * 4409 PCI_MSIX_VECTOR_SIZE); 4410 } 4411 4412 /* Return the MSI-X PBA size */ 4413 static size_t 4414 get_msix_pba_size(dev_info_t *dip) 4415 { 4416 ushort_t msix_ctrl = get_msix_ctrl(dip); 4417 ASSERT(msix_ctrl != 0); 4418 4419 return (((msix_ctrl & PCI_MSIX_TBL_SIZE_MASK) + 64) / 64 * 8); 4420 } 4421 4422 /* Set up the MSI-X table/PBA save area */ 4423 static void 4424 hermon_set_msix_info(hermon_state_t *state) 4425 { 4426 uint_t rnumber, breg, nregs; 4427 ushort_t caps_ctrl, msix_ctrl; 4428 pci_regspec_t *rp; 4429 int reg_size, addr_space, offset, *regs_list, i; 4430 4431 /* 4432 * MSI-X BIR Index Table: 4433 * BAR indicator register (BIR) to Base Address register. 4434 */ 4435 uchar_t pci_msix_bir_index[8] = {0x10, 0x14, 0x18, 0x1c, 4436 0x20, 0x24, 0xff, 0xff}; 4437 4438 /* Fastreboot data access attribute */ 4439 ddi_device_acc_attr_t dev_attr = { 4440 0, /* version */ 4441 DDI_STRUCTURE_LE_ACC, 4442 DDI_STRICTORDER_ACC, /* attr access */ 4443 0 4444 }; 4445 4446 ddi_acc_handle_t pci_cfg_hdl = hermon_get_pcihdl(state); 4447 ASSERT(pci_cfg_hdl != NULL); 4448 4449 if ((PCI_CAP_LOCATE(pci_cfg_hdl, 4450 PCI_CAP_ID_MSI_X, &caps_ctrl) == DDI_SUCCESS)) { 4451 if ((msix_ctrl = PCI_CAP_GET16(pci_cfg_hdl, NULL, caps_ctrl, 4452 PCI_MSIX_CTRL)) == PCI_CAP_EINVAL16) 4453 return; 4454 } 4455 ASSERT(msix_ctrl != 0); 4456 4457 state->hs_msix_tbl_offset = PCI_CAP_GET32(pci_cfg_hdl, NULL, caps_ctrl, 4458 PCI_MSIX_TBL_OFFSET); 4459 4460 /* Get the BIR for MSI-X table */ 4461 breg = pci_msix_bir_index[state->hs_msix_tbl_offset & 4462 PCI_MSIX_TBL_BIR_MASK]; 4463 ASSERT(breg != 0xFF); 4464 4465 /* Set the MSI-X table offset */ 4466 state->hs_msix_tbl_offset = state->hs_msix_tbl_offset & 4467 ~PCI_MSIX_TBL_BIR_MASK; 4468 4469 /* Set the MSI-X table size */ 4470 state->hs_msix_tbl_size = ((msix_ctrl & PCI_MSIX_TBL_SIZE_MASK) + 1) * 4471 PCI_MSIX_VECTOR_SIZE; 4472 4473 if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, state->hs_dip, 4474 DDI_PROP_DONTPASS, "reg", (int **)®s_list, &nregs) != 4475 DDI_PROP_SUCCESS) { 4476 return; 4477 } 4478 reg_size = sizeof (pci_regspec_t) / sizeof (int); 4479 4480 /* Check the register number for MSI-X table */ 4481 for (i = 1, rnumber = 0; i < nregs/reg_size; i++) { 4482 rp = (pci_regspec_t *)®s_list[i * reg_size]; 4483 addr_space = rp->pci_phys_hi & PCI_ADDR_MASK; 4484 offset = PCI_REG_REG_G(rp->pci_phys_hi); 4485 4486 if ((offset == breg) && ((addr_space == PCI_ADDR_MEM32) || 4487 (addr_space == PCI_ADDR_MEM64))) { 4488 rnumber = i; 4489 break; 4490 } 4491 } 4492 ASSERT(rnumber != 0); 4493 state->hs_msix_tbl_rnumber = rnumber; 4494 4495 /* Set device attribute version and access according to Hermon FM */ 4496 dev_attr.devacc_attr_version = hermon_devacc_attr_version(state); 4497 dev_attr.devacc_attr_access = hermon_devacc_attr_access(state); 4498 4499 /* Map the entire MSI-X vector table */ 4500 if (hermon_regs_map_setup(state, state->hs_msix_tbl_rnumber, 4501 (caddr_t *)&state->hs_msix_tbl_addr, state->hs_msix_tbl_offset, 4502 state->hs_msix_tbl_size, &dev_attr, 4503 &state->hs_fm_msix_tblhdl) != DDI_SUCCESS) { 4504 return; 4505 } 4506 4507 state->hs_msix_pba_offset = PCI_CAP_GET32(pci_cfg_hdl, NULL, caps_ctrl, 4508 PCI_MSIX_PBA_OFFSET); 4509 4510 /* Get the BIR for MSI-X PBA */ 4511 breg = pci_msix_bir_index[state->hs_msix_pba_offset & 4512 PCI_MSIX_PBA_BIR_MASK]; 4513 ASSERT(breg != 0xFF); 4514 4515 /* Set the MSI-X PBA offset */ 4516 state->hs_msix_pba_offset = state->hs_msix_pba_offset & 4517 ~PCI_MSIX_PBA_BIR_MASK; 4518 4519 /* Set the MSI-X PBA size */ 4520 state->hs_msix_pba_size = 4521 ((msix_ctrl & PCI_MSIX_TBL_SIZE_MASK) + 64) / 64 * 8; 4522 4523 /* Check the register number for MSI-X PBA */ 4524 for (i = 1, rnumber = 0; i < nregs/reg_size; i++) { 4525 rp = (pci_regspec_t *)®s_list[i * reg_size]; 4526 addr_space = rp->pci_phys_hi & PCI_ADDR_MASK; 4527 offset = PCI_REG_REG_G(rp->pci_phys_hi); 4528 4529 if ((offset == breg) && ((addr_space == PCI_ADDR_MEM32) || 4530 (addr_space == PCI_ADDR_MEM64))) { 4531 rnumber = i; 4532 break; 4533 } 4534 } 4535 ASSERT(rnumber != 0); 4536 state->hs_msix_pba_rnumber = rnumber; 4537 4538 /* Map in the MSI-X Pending Bit Array */ 4539 if (hermon_regs_map_setup(state, state->hs_msix_pba_rnumber, 4540 (caddr_t *)&state->hs_msix_pba_addr, state->hs_msix_pba_offset, 4541 state->hs_msix_pba_size, &dev_attr, 4542 &state->hs_fm_msix_pbahdl) != DDI_SUCCESS) { 4543 hermon_regs_map_free(state, &state->hs_fm_msix_tblhdl); 4544 state->hs_fm_msix_tblhdl = NULL; 4545 return; 4546 } 4547 4548 /* Set the MSI-X table save area */ 4549 state->hs_msix_tbl_entries = kmem_alloc(state->hs_msix_tbl_size, 4550 KM_SLEEP); 4551 4552 /* Set the MSI-X PBA save area */ 4553 state->hs_msix_pba_entries = kmem_alloc(state->hs_msix_pba_size, 4554 KM_SLEEP); 4555 } 4556 4557 /* Disable Hermon interrupts */ 4558 static int 4559 hermon_intr_disable(hermon_state_t *state) 4560 { 4561 ushort_t msix_ctrl = 0, caps_ctrl = 0; 4562 ddi_acc_handle_t pci_cfg_hdl = hermon_get_pcihdl(state); 4563 ddi_acc_handle_t msix_tblhdl = hermon_get_msix_tblhdl(state); 4564 int i, j; 4565 ASSERT(pci_cfg_hdl != NULL && msix_tblhdl != NULL); 4566 ASSERT(state->hs_intr_types_avail & 4567 (DDI_INTR_TYPE_FIXED | DDI_INTR_TYPE_MSI | DDI_INTR_TYPE_MSIX)); 4568 4569 /* 4570 * Check if MSI-X interrupts are used. If so, disable MSI-X interupts. 4571 * If not, since Hermon doesn't support MSI interrupts, assuming the 4572 * legacy interrupt is used instead, disable the legacy interrupt. 4573 */ 4574 if ((state->hs_cfg_profile->cp_use_msi_if_avail != 0) && 4575 (state->hs_intr_types_avail & DDI_INTR_TYPE_MSIX)) { 4576 4577 if ((PCI_CAP_LOCATE(pci_cfg_hdl, 4578 PCI_CAP_ID_MSI_X, &caps_ctrl) == DDI_SUCCESS)) { 4579 if ((msix_ctrl = PCI_CAP_GET16(pci_cfg_hdl, NULL, 4580 caps_ctrl, PCI_MSIX_CTRL)) == PCI_CAP_EINVAL16) 4581 return (DDI_FAILURE); 4582 } 4583 ASSERT(msix_ctrl != 0); 4584 4585 if (!(msix_ctrl & PCI_MSIX_ENABLE_BIT)) 4586 return (DDI_SUCCESS); 4587 4588 /* Clear all inums in MSI-X table */ 4589 for (i = 0; i < get_msix_tbl_size(state->hs_dip); 4590 i += PCI_MSIX_VECTOR_SIZE) { 4591 for (j = 0; j < PCI_MSIX_VECTOR_SIZE; j += 4) { 4592 char *addr = state->hs_msix_tbl_addr + i + j; 4593 ddi_put32(msix_tblhdl, 4594 (uint32_t *)(uintptr_t)addr, 0x0); 4595 } 4596 } 4597 4598 /* Disable MSI-X interrupts */ 4599 msix_ctrl &= ~PCI_MSIX_ENABLE_BIT; 4600 PCI_CAP_PUT16(pci_cfg_hdl, NULL, caps_ctrl, PCI_MSIX_CTRL, 4601 msix_ctrl); 4602 4603 } else { 4604 uint16_t cmdreg = pci_config_get16(pci_cfg_hdl, PCI_CONF_COMM); 4605 ASSERT(state->hs_intr_types_avail & DDI_INTR_TYPE_FIXED); 4606 4607 /* Disable the legacy interrupts */ 4608 cmdreg |= PCI_COMM_INTX_DISABLE; 4609 pci_config_put16(pci_cfg_hdl, PCI_CONF_COMM, cmdreg); 4610 } 4611 4612 return (DDI_SUCCESS); 4613 } 4614 4615 /* Hermon quiesce(9F) entry */ 4616 static int 4617 hermon_quiesce(dev_info_t *dip) 4618 { 4619 hermon_state_t *state = ddi_get_soft_state(hermon_statep, 4620 DEVI(dip)->devi_instance); 4621 ddi_acc_handle_t pcihdl = hermon_get_pcihdl(state); 4622 ddi_acc_handle_t cmdhdl = hermon_get_cmdhdl(state); 4623 ddi_acc_handle_t msix_tbl_hdl = hermon_get_msix_tblhdl(state); 4624 ddi_acc_handle_t msix_pba_hdl = hermon_get_msix_pbahdl(state); 4625 uint32_t sem, reset_delay = state->hs_cfg_profile->cp_sw_reset_delay; 4626 uint64_t data64; 4627 uint32_t data32; 4628 int status, i, j, loopcnt; 4629 uint_t offset; 4630 4631 ASSERT(state != NULL); 4632 4633 /* start fastreboot */ 4634 state->hs_quiescing = B_TRUE; 4635 4636 /* If it's in maintenance mode, do nothing but return with SUCCESS */ 4637 if (!HERMON_IS_OPERATIONAL(state->hs_operational_mode)) { 4638 return (DDI_SUCCESS); 4639 } 4640 4641 /* suppress Hermon FM ereports */ 4642 if (hermon_get_state(state) & HCA_EREPORT_FM) { 4643 hermon_clr_state_nolock(state, HCA_EREPORT_FM); 4644 } 4645 4646 /* Shutdown HCA ports */ 4647 if (hermon_hca_ports_shutdown(state, 4648 state->hs_cfg_profile->cp_num_ports) != HERMON_CMD_SUCCESS) { 4649 state->hs_quiescing = B_FALSE; 4650 return (DDI_FAILURE); 4651 } 4652 4653 /* Close HCA */ 4654 if (hermon_close_hca_cmd_post(state, HERMON_CMD_NOSLEEP_SPIN) != 4655 HERMON_CMD_SUCCESS) { 4656 state->hs_quiescing = B_FALSE; 4657 return (DDI_FAILURE); 4658 } 4659 4660 /* Disable interrupts */ 4661 if (hermon_intr_disable(state) != DDI_SUCCESS) { 4662 state->hs_quiescing = B_FALSE; 4663 return (DDI_FAILURE); 4664 } 4665 4666 /* 4667 * Query the PCI capabilities of the HCA device, but don't process 4668 * the VPD until after reset. 4669 */ 4670 if (hermon_pci_capability_list(state, pcihdl) != DDI_SUCCESS) { 4671 state->hs_quiescing = B_FALSE; 4672 return (DDI_FAILURE); 4673 } 4674 4675 /* 4676 * Read all PCI config info (reg0...reg63). Note: According to the 4677 * Hermon software reset application note, we should not read or 4678 * restore the values in reg22 and reg23. 4679 * NOTE: For Hermon (and Arbel too) it says to restore the command 4680 * register LAST, and technically, you need to restore the 4681 * PCIE Capability "device control" and "link control" (word-sized, 4682 * at offsets 0x08 and 0x10 from the capbility ID respectively). 4683 * We hold off restoring the command register - offset 0x4 - till last 4684 */ 4685 4686 /* 1st, wait for the semaphore assure accessibility - per PRM */ 4687 status = -1; 4688 for (i = 0; i < NANOSEC/MICROSEC /* 1sec timeout */; i++) { 4689 sem = ddi_get32(cmdhdl, state->hs_cmd_regs.sw_semaphore); 4690 if (sem == 0) { 4691 status = 0; 4692 break; 4693 } 4694 drv_usecwait(1); 4695 } 4696 4697 /* Check if timeout happens */ 4698 if (status == -1) { 4699 state->hs_quiescing = B_FALSE; 4700 return (DDI_FAILURE); 4701 } 4702 4703 /* MSI-X interrupts are used, save the MSI-X table */ 4704 if (msix_tbl_hdl && msix_pba_hdl) { 4705 /* save MSI-X table */ 4706 for (i = 0; i < get_msix_tbl_size(state->hs_dip); 4707 i += PCI_MSIX_VECTOR_SIZE) { 4708 for (j = 0; j < PCI_MSIX_VECTOR_SIZE; j += 4) { 4709 char *addr = state->hs_msix_tbl_addr + i + j; 4710 data32 = ddi_get32(msix_tbl_hdl, 4711 (uint32_t *)(uintptr_t)addr); 4712 *(uint32_t *)(uintptr_t)(state-> 4713 hs_msix_tbl_entries + i + j) = data32; 4714 } 4715 } 4716 /* save MSI-X PBA */ 4717 for (i = 0; i < get_msix_pba_size(state->hs_dip); i += 8) { 4718 char *addr = state->hs_msix_pba_addr + i; 4719 data64 = ddi_get64(msix_pba_hdl, 4720 (uint64_t *)(uintptr_t)addr); 4721 *(uint64_t *)(uintptr_t)(state-> 4722 hs_msix_pba_entries + i) = data64; 4723 } 4724 } 4725 4726 /* save PCI config space */ 4727 for (i = 0; i < HERMON_SW_RESET_NUMREGS; i++) { 4728 if ((i != HERMON_SW_RESET_REG22_RSVD) && 4729 (i != HERMON_SW_RESET_REG23_RSVD)) { 4730 state->hs_cfg_data[i] = 4731 pci_config_get32(pcihdl, i << 2); 4732 } 4733 } 4734 4735 /* SW-reset HCA */ 4736 ddi_put32(cmdhdl, state->hs_cmd_regs.sw_reset, HERMON_SW_RESET_START); 4737 4738 /* 4739 * This delay is required so as not to cause a panic here. If the 4740 * device is accessed too soon after reset it will not respond to 4741 * config cycles, causing a Master Abort and panic. 4742 */ 4743 drv_usecwait(reset_delay); 4744 4745 /* Poll waiting for the device to finish resetting */ 4746 loopcnt = 100; /* 100 times @ 100 usec - total delay 10 msec */ 4747 while ((pci_config_get32(pcihdl, 0) & 0x0000FFFF) != PCI_VENID_MLX) { 4748 drv_usecwait(HERMON_SW_RESET_POLL_DELAY); 4749 if (--loopcnt == 0) 4750 break; /* just in case, break and go on */ 4751 } 4752 if (loopcnt == 0) { 4753 state->hs_quiescing = B_FALSE; 4754 return (DDI_FAILURE); 4755 } 4756 4757 /* Restore the config info */ 4758 for (i = 0; i < HERMON_SW_RESET_NUMREGS; i++) { 4759 if (i == 1) continue; /* skip the status/ctrl reg */ 4760 if ((i != HERMON_SW_RESET_REG22_RSVD) && 4761 (i != HERMON_SW_RESET_REG23_RSVD)) { 4762 pci_config_put32(pcihdl, i << 2, state->hs_cfg_data[i]); 4763 } 4764 } 4765 4766 /* If MSI-X interrupts are used, restore the MSI-X table */ 4767 if (msix_tbl_hdl && msix_pba_hdl) { 4768 /* restore MSI-X PBA */ 4769 for (i = 0; i < get_msix_pba_size(state->hs_dip); i += 8) { 4770 char *addr = state->hs_msix_pba_addr + i; 4771 data64 = *(uint64_t *)(uintptr_t) 4772 (state->hs_msix_pba_entries + i); 4773 ddi_put64(msix_pba_hdl, 4774 (uint64_t *)(uintptr_t)addr, data64); 4775 } 4776 /* restore MSI-X table */ 4777 for (i = 0; i < get_msix_tbl_size(state->hs_dip); 4778 i += PCI_MSIX_VECTOR_SIZE) { 4779 for (j = 0; j < PCI_MSIX_VECTOR_SIZE; j += 4) { 4780 char *addr = state->hs_msix_tbl_addr + i + j; 4781 data32 = *(uint32_t *)(uintptr_t) 4782 (state->hs_msix_tbl_entries + i + j); 4783 ddi_put32(msix_tbl_hdl, 4784 (uint32_t *)(uintptr_t)addr, data32); 4785 } 4786 } 4787 } 4788 4789 /* 4790 * PCI Express Capability - we saved during capability list, and 4791 * we'll restore them here. 4792 */ 4793 offset = state->hs_pci_cap_offset; 4794 data32 = state->hs_pci_cap_devctl; 4795 pci_config_put32(pcihdl, offset + HERMON_PCI_CAP_DEV_OFFS, data32); 4796 data32 = state->hs_pci_cap_lnkctl; 4797 pci_config_put32(pcihdl, offset + HERMON_PCI_CAP_LNK_OFFS, data32); 4798 4799 /* restore the command register */ 4800 pci_config_put32(pcihdl, 0x04, (state->hs_cfg_data[1] | 0x0006)); 4801 4802 return (DDI_SUCCESS); 4803 } 4804