1 /* 2 * Copyright 2010 Sun Microsystems, Inc. All rights reserved. 3 * Use is subject to license terms. 4 */ 5 6 /* 7 * Copyright (c) 1998 The NetBSD Foundation, Inc. 8 * All rights reserved. 9 * 10 * This code is derived from software contributed to The NetBSD Foundation 11 * by Frank van der Linden. 12 * 13 * Redistribution and use in source and binary forms, with or without 14 * modification, are permitted provided that the following conditions 15 * are met: 16 * 1. Redistributions of source code must retain the above copyright 17 * notice, this list of conditions and the following disclaimer. 18 * 2. Redistributions in binary form must reproduce the above copyright 19 * notice, this list of conditions and the following disclaimer in the 20 * documentation and/or other materials provided with the distribution. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 23 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 24 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 25 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 32 * POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 #include <sys/varargs.h> 36 #include <sys/types.h> 37 #include <sys/modctl.h> 38 #include <sys/conf.h> 39 #include <sys/devops.h> 40 #include <sys/stream.h> 41 #include <sys/strsun.h> 42 #include <sys/cmn_err.h> 43 #include <sys/ethernet.h> 44 #include <sys/pci.h> 45 #include <sys/kmem.h> 46 #include <sys/time.h> 47 #include <sys/mii.h> 48 #include <sys/miiregs.h> 49 #include <sys/mac_ether.h> 50 #include <sys/mac_provider.h> 51 #include <sys/strsubr.h> 52 #include <sys/pattr.h> 53 #include <sys/dlpi.h> 54 #include <sys/ddi.h> 55 #include <sys/sunddi.h> 56 57 #include <sys/vlan.h> 58 59 #include "elxl.h" 60 61 static boolean_t elxl_add_intr(elxl_t *); 62 static void elxl_probe_media(elxl_t *); 63 static void elxl_set_rxfilter(elxl_t *); 64 static void elxl_set_media(elxl_t *); 65 static uint16_t elxl_read_eeprom(elxl_t *, int); 66 static void elxl_init(elxl_t *); 67 static void elxl_stop(elxl_t *); 68 static void elxl_reset(elxl_t *); 69 static void elxl_getstats(elxl_t *); 70 71 static int elxl_eeprom_busy(elxl_t *); 72 73 static void elxl_setup_tx(elxl_t *); 74 75 static uint16_t elxl_mii_read(void *, uint8_t, uint8_t); 76 static void elxl_mii_write(void *, uint8_t, uint8_t, uint16_t); 77 static void elxl_mii_notify(void *, link_state_t); 78 79 static int elxl_m_stat(void *, uint_t, uint64_t *); 80 static int elxl_m_start(void *); 81 static void elxl_m_stop(void *); 82 static mblk_t *elxl_m_tx(void *, mblk_t *); 83 static int elxl_m_promisc(void *, boolean_t); 84 static int elxl_m_multicst(void *, boolean_t, const uint8_t *); 85 static int elxl_m_unicst(void *, const uint8_t *); 86 static int elxl_m_getprop(void *, const char *, mac_prop_id_t, uint_t, 87 uint_t, void *, uint_t *); 88 static int elxl_m_setprop(void *, const char *, mac_prop_id_t, uint_t, 89 const void *); 90 static boolean_t elxl_m_getcapab(void *, mac_capab_t cap, void *); 91 static uint_t elxl_intr(caddr_t, caddr_t); 92 static void elxl_error(elxl_t *, char *, ...); 93 static void elxl_linkcheck(void *); 94 static int elxl_attach(dev_info_t *); 95 static void elxl_detach(elxl_t *); 96 static void elxl_suspend(elxl_t *); 97 static void elxl_resume(dev_info_t *); 98 static int elxl_ddi_attach(dev_info_t *, ddi_attach_cmd_t); 99 static int elxl_ddi_detach(dev_info_t *, ddi_detach_cmd_t); 100 static int elxl_ddi_quiesce(dev_info_t *); 101 102 static ddi_device_acc_attr_t ex_dev_acc_attr = { 103 DDI_DEVICE_ATTR_V0, 104 DDI_STRUCTURE_LE_ACC, 105 DDI_STRICTORDER_ACC 106 }; 107 108 static ddi_device_acc_attr_t ex_buf_acc_attr = { 109 DDI_DEVICE_ATTR_V0, 110 DDI_NEVERSWAP_ACC, 111 DDI_STORECACHING_OK_ACC 112 }; 113 114 /* 115 * In theory buffers can have more flexible DMA attributes, but since 116 * we're just using a preallocated region with bcopy, there is little 117 * reason to allow for rougher alignment. (Further, the 8-byte 118 * alignment can allow for more efficient bcopy and similar operations 119 * from the buffer.) 120 */ 121 static ddi_dma_attr_t ex_dma_attr = { 122 DMA_ATTR_V0, /* dma_attr_version */ 123 0, /* dma_attr_addr_lo */ 124 0xFFFFFFFFU, /* dma_attr_addr_hi */ 125 0x00FFFFFFU, /* dma_attr_count_max */ 126 8, /* dma_attr_align */ 127 0x7F, /* dma_attr_burstsizes */ 128 1, /* dma_attr_minxfer */ 129 0xFFFFFFFFU, /* dma_attr_maxxfer */ 130 0xFFFFFFFFU, /* dma_attr_seg */ 131 1, /* dma_attr_sgllen */ 132 1, /* dma_attr_granular */ 133 0 /* dma_attr_flags */ 134 }; 135 136 static uint8_t ex_broadcast[6] = { 137 0xff, 0xff, 0xff, 0xff, 0xff, 0xff 138 }; 139 140 /* 141 * Structure to map media-present bits in boards to ifmedia codes and 142 * printable media names. Used for table-driven ifmedia initialization. 143 */ 144 typedef struct ex_media { 145 int exm_mpbit; /* media present bit */ 146 int exm_xcvr; /* XCVR_SEL_* constant */ 147 } ex_media_t; 148 149 /* 150 * Media table for 3c90x chips. Note that chips with MII have no 151 * `native' media. This is sorted in "reverse preference". 152 */ 153 static ex_media_t ex_native_media[] = { 154 { MEDIAOPT_AUI, XCVR_SEL_AUI }, 155 { MEDIAOPT_BNC, XCVR_SEL_BNC }, 156 { MEDIAOPT_10T, XCVR_SEL_10T }, 157 { MEDIAOPT_100TX, XCVR_SEL_AUTO }, /* only 90XB */ 158 { MEDIAOPT_100FX, XCVR_SEL_100FX }, 159 { MEDIAOPT_MII, XCVR_SEL_MII }, 160 { MEDIAOPT_100T4, XCVR_SEL_MII }, 161 { 0, 0 }, 162 }; 163 164 165 /* 166 * NB: There are lots of other models that *could* be supported. 167 * Specifically there are cardbus and miniPCI variants that could be 168 * easily added here, but they require special hacks and I have no 169 * access to the hardware required to verify them. Especially they 170 * seem to require some extra work in another register window, and I 171 * have no supporting documentation. 172 */ 173 static const struct ex_product { 174 uint16_t epp_prodid; /* PCI product ID */ 175 const char *epp_name; /* device name */ 176 unsigned epp_flags; /* initial softc flags */ 177 } ex_products[] = { 178 { 0x4500, "3c450-TX", 0 }, 179 { 0x7646, "3cSOHO100-TX", 0 }, 180 { 0x9000, "3c900-TPO", 0 }, 181 { 0x9001, "3c900-COMBO", 0 }, 182 { 0x9004, "3c900B-TPO", 0 }, 183 { 0x9005, "3c900B-COMBO", 0 }, 184 { 0x9006, "3c900B-TPC", 0 }, 185 { 0x900a, "3c900B-FL", 0 }, 186 { 0x9050, "3c905-TX", 0 }, 187 { 0x9051, "3c905-T4", 0 }, 188 { 0x9055, "3c905B-TX", 0 }, 189 { 0x9056, "3c905B-T4", 0 }, 190 { 0x9058, "3c905B-COMBO", 0 }, 191 { 0x905a, "3c905B-FX", 0 }, 192 { 0x9200, "3c905C-TX", 0 }, 193 { 0x9201, "3c920B-EMB", 0 }, 194 { 0x9202, "3c920B-EMB-WNM", 0 }, 195 { 0x9800, "3c980", 0 }, 196 { 0x9805, "3c980C-TXM", 0 }, 197 198 { 0, NULL, 0 }, 199 }; 200 201 mac_priv_prop_t ex_priv_prop[] = { 202 { "_media", MAC_PROP_PERM_RW }, 203 { "_available_media", MAC_PROP_PERM_READ }, 204 }; 205 206 static mii_ops_t ex_mii_ops = { 207 MII_OPS_VERSION, 208 elxl_mii_read, 209 elxl_mii_write, 210 elxl_mii_notify, 211 }; 212 213 static mac_callbacks_t elxl_m_callbacks = { 214 MC_GETCAPAB | MC_SETPROP | MC_GETPROP, 215 elxl_m_stat, 216 elxl_m_start, 217 elxl_m_stop, 218 elxl_m_promisc, 219 elxl_m_multicst, 220 elxl_m_unicst, 221 elxl_m_tx, 222 NULL, 223 elxl_m_getcapab, 224 NULL, 225 NULL, 226 elxl_m_setprop, 227 elxl_m_getprop 228 }; 229 230 /* 231 * Stream information 232 */ 233 DDI_DEFINE_STREAM_OPS(ex_devops, nulldev, nulldev, 234 elxl_ddi_attach, elxl_ddi_detach, 235 nodev, NULL, D_MP, NULL, elxl_ddi_quiesce); 236 237 /* 238 * Module linkage information. 239 */ 240 241 static struct modldrv ex_modldrv = { 242 &mod_driverops, /* drv_modops */ 243 "3Com EtherLink XL", /* drv_linkinfo */ 244 &ex_devops /* drv_dev_ops */ 245 }; 246 247 static struct modlinkage ex_modlinkage = { 248 MODREV_1, /* ml_rev */ 249 { &ex_modldrv, NULL } /* ml_linkage */ 250 }; 251 252 int 253 _init(void) 254 { 255 int rv; 256 mac_init_ops(&ex_devops, "elxl"); 257 if ((rv = mod_install(&ex_modlinkage)) != DDI_SUCCESS) { 258 mac_fini_ops(&ex_devops); 259 } 260 return (rv); 261 } 262 263 int 264 _fini(void) 265 { 266 int rv; 267 if ((rv = mod_remove(&ex_modlinkage)) == DDI_SUCCESS) { 268 mac_fini_ops(&ex_devops); 269 } 270 return (rv); 271 } 272 273 int 274 _info(struct modinfo *modinfop) 275 { 276 return (mod_info(&ex_modlinkage, modinfop)); 277 } 278 279 static void 280 ex_free_ring(ex_ring_t *r) 281 { 282 for (int i = 0; i < r->r_count; i++) { 283 ex_desc_t *ed = &r->r_desc[i]; 284 if (ed->ed_bufaddr) 285 (void) ddi_dma_unbind_handle(ed->ed_dmah); 286 if (ed->ed_acch) 287 ddi_dma_mem_free(&ed->ed_acch); 288 if (ed->ed_dmah) 289 ddi_dma_free_handle(&ed->ed_dmah); 290 } 291 292 if (r->r_paddr) 293 (void) ddi_dma_unbind_handle(r->r_dmah); 294 if (r->r_acch) 295 ddi_dma_mem_free(&r->r_acch); 296 if (r->r_dmah) 297 ddi_dma_free_handle(&r->r_dmah); 298 299 kmem_free(r->r_desc, sizeof (ex_desc_t) * r->r_count); 300 r->r_desc = NULL; 301 } 302 303 static void 304 elxl_reset_ring(ex_ring_t *r, uint_t dir) 305 { 306 ex_desc_t *ed; 307 ex_pd_t *pd; 308 309 if (dir == DDI_DMA_WRITE) { 310 /* transmit ring, not linked yet */ 311 for (int i = 0; i < r->r_count; i++) { 312 ed = &r->r_desc[i]; 313 pd = ed->ed_pd; 314 PUT_PD(r, pd->pd_link, 0); 315 PUT_PD(r, pd->pd_fsh, 0); 316 PUT_PD(r, pd->pd_len, EX_FR_LAST); 317 PUT_PD(r, pd->pd_addr, ed->ed_bufaddr); 318 } 319 r->r_head = NULL; 320 r->r_tail = NULL; 321 r->r_avail = r->r_count; 322 } else { 323 /* receive is linked into a list */ 324 for (int i = 0; i < r->r_count; i++) { 325 ed = &r->r_desc[i]; 326 pd = ed->ed_pd; 327 PUT_PD(r, pd->pd_link, ed->ed_next->ed_descaddr); 328 PUT_PD(r, pd->pd_status, 0); 329 PUT_PD(r, pd->pd_len, EX_BUFSZ | EX_FR_LAST); 330 PUT_PD(r, pd->pd_addr, ed->ed_bufaddr); 331 } 332 r->r_head = &r->r_desc[0]; 333 r->r_tail = NULL; 334 r->r_avail = 0; 335 } 336 (void) ddi_dma_sync(r->r_dmah, 0, 0, DDI_DMA_SYNC_FORDEV); 337 } 338 339 static boolean_t 340 ex_alloc_ring(elxl_t *sc, int count, ex_ring_t *r, uint_t dir) 341 { 342 dev_info_t *dip = sc->ex_dip; 343 int i; 344 int rv; 345 size_t len; 346 ddi_dma_cookie_t dmac; 347 unsigned ndmac; 348 349 r->r_count = count; 350 r->r_desc = kmem_zalloc(sizeof (ex_desc_t) * count, KM_SLEEP); 351 352 rv = ddi_dma_alloc_handle(dip, &ex_dma_attr, DDI_DMA_DONTWAIT, 353 NULL, &r->r_dmah); 354 if (rv != DDI_SUCCESS) { 355 elxl_error(sc, "unable to allocate descriptor dma handle"); 356 return (B_FALSE); 357 } 358 359 rv = ddi_dma_mem_alloc(r->r_dmah, count * sizeof (struct ex_pd), 360 &ex_dev_acc_attr, DDI_DMA_CONSISTENT, DDI_DMA_DONTWAIT, NULL, 361 (caddr_t *)&r->r_pd, &len, &r->r_acch); 362 if (rv != DDI_SUCCESS) { 363 elxl_error(sc, "unable to allocate descriptor memory"); 364 return (B_FALSE); 365 } 366 bzero(r->r_pd, len); 367 368 rv = ddi_dma_addr_bind_handle(r->r_dmah, NULL, 369 (caddr_t)r->r_pd, len, DDI_DMA_RDWR | DDI_DMA_CONSISTENT, 370 DDI_DMA_DONTWAIT, NULL, &dmac, &ndmac); 371 if (rv != DDI_DMA_MAPPED) { 372 elxl_error(sc, "unable to map descriptor memory"); 373 return (B_FALSE); 374 } 375 r->r_paddr = dmac.dmac_address; 376 377 for (i = 0; i < count; i++) { 378 ex_desc_t *ed = &r->r_desc[i]; 379 ex_pd_t *pd = &r->r_pd[i]; 380 381 ed->ed_pd = pd; 382 ed->ed_off = (i * sizeof (ex_pd_t)); 383 ed->ed_descaddr = r->r_paddr + (i * sizeof (ex_pd_t)); 384 385 /* Link the high level descriptors into a ring. */ 386 ed->ed_next = &r->r_desc[(i + 1) % count]; 387 ed->ed_next->ed_prev = ed; 388 389 rv = ddi_dma_alloc_handle(dip, &ex_dma_attr, 390 DDI_DMA_DONTWAIT, NULL, &ed->ed_dmah); 391 if (rv != 0) { 392 elxl_error(sc, "can't allocate buf dma handle"); 393 return (B_FALSE); 394 } 395 rv = ddi_dma_mem_alloc(ed->ed_dmah, EX_BUFSZ, &ex_buf_acc_attr, 396 DDI_DMA_STREAMING, DDI_DMA_DONTWAIT, NULL, &ed->ed_buf, 397 &len, &ed->ed_acch); 398 if (rv != DDI_SUCCESS) { 399 elxl_error(sc, "unable to allocate buf memory"); 400 return (B_FALSE); 401 } 402 bzero(ed->ed_buf, len); 403 404 rv = ddi_dma_addr_bind_handle(ed->ed_dmah, NULL, 405 ed->ed_buf, len, dir | DDI_DMA_STREAMING, 406 DDI_DMA_DONTWAIT, NULL, &dmac, &ndmac); 407 if (rv != DDI_DMA_MAPPED) { 408 elxl_error(sc, "unable to map buf memory"); 409 return (B_FALSE); 410 } 411 ed->ed_bufaddr = dmac.dmac_address; 412 } 413 414 elxl_reset_ring(r, dir); 415 416 return (B_TRUE); 417 } 418 419 static boolean_t 420 elxl_add_intr(elxl_t *sc) 421 { 422 dev_info_t *dip; 423 int actual; 424 uint_t ipri; 425 426 int rv; 427 428 dip = sc->ex_dip; 429 430 rv = ddi_intr_alloc(dip, &sc->ex_intrh, DDI_INTR_TYPE_FIXED, 431 0, 1, &actual, DDI_INTR_ALLOC_STRICT); 432 if ((rv != DDI_SUCCESS) || (actual != 1)) { 433 elxl_error(sc, "Unable to allocate interrupt, %d, count %d", 434 rv, actual); 435 return (B_FALSE); 436 } 437 438 if (ddi_intr_get_pri(sc->ex_intrh, &ipri) != DDI_SUCCESS) { 439 elxl_error(sc, "Unable to get interrupt priority"); 440 return (B_FALSE); 441 } 442 443 if (ddi_intr_add_handler(sc->ex_intrh, elxl_intr, sc, NULL) != 444 DDI_SUCCESS) { 445 elxl_error(sc, "Can't add interrupt handler"); 446 (void) ddi_intr_free(sc->ex_intrh); 447 sc->ex_intrh = NULL; 448 return (B_FALSE); 449 } 450 mutex_init(&sc->ex_intrlock, NULL, MUTEX_DRIVER, DDI_INTR_PRI(ipri)); 451 mutex_init(&sc->ex_txlock, NULL, MUTEX_DRIVER, DDI_INTR_PRI(ipri)); 452 453 return (B_TRUE); 454 } 455 456 static int 457 elxl_attach(dev_info_t *dip) 458 { 459 elxl_t *sc; 460 mac_register_t *macp; 461 uint16_t val; 462 uint16_t venid; 463 uint16_t devid; 464 int i; 465 466 sc = kmem_zalloc(sizeof (*sc), KM_SLEEP); 467 ddi_set_driver_private(dip, sc); 468 sc->ex_dip = dip; 469 470 if (pci_config_setup(dip, &sc->ex_pcih) != DDI_SUCCESS) { 471 elxl_error(sc, "unable to setup PCI config handle"); 472 goto fail; 473 } 474 venid = pci_config_get16(sc->ex_pcih, PCI_CONF_VENID); 475 devid = pci_config_get16(sc->ex_pcih, PCI_CONF_DEVID); 476 477 if (venid != 0x10b7) { 478 /* Not a 3Com part! */ 479 elxl_error(sc, "Unsupported vendor id (0x%x)", venid); 480 goto fail; 481 } 482 for (i = 0; ex_products[i].epp_name; i++) { 483 if (devid == ex_products[i].epp_prodid) { 484 cmn_err(CE_CONT, "?%s%d: 3Com %s", 485 ddi_driver_name(dip), 486 ddi_get_instance(dip), 487 ex_products[i].epp_name); 488 sc->ex_conf = ex_products[i].epp_flags; 489 break; 490 } 491 } 492 if (ex_products[i].epp_name == NULL) { 493 /* Not a produce we know how to support */ 494 elxl_error(sc, "Unsupported device id (0x%x)", devid); 495 elxl_error(sc, "Driver may or may not function."); 496 } 497 498 pci_config_put16(sc->ex_pcih, PCI_CONF_COMM, 499 pci_config_get16(sc->ex_pcih, PCI_CONF_COMM) | 500 PCI_COMM_IO | PCI_COMM_MAE | PCI_COMM_ME); 501 502 if (ddi_regs_map_setup(dip, 1, &sc->ex_regsva, 0, 0, &ex_dev_acc_attr, 503 &sc->ex_regsh) != DDI_SUCCESS) { 504 elxl_error(sc, "Unable to map device registers"); 505 goto fail; 506 } 507 508 if (!elxl_add_intr(sc)) { 509 goto fail; 510 } 511 512 elxl_reset(sc); 513 514 val = elxl_read_eeprom(sc, EE_OEM_ADDR_0); 515 sc->ex_factaddr[0] = val >> 8; 516 sc->ex_factaddr[1] = val & 0xff; 517 val = elxl_read_eeprom(sc, EE_OEM_ADDR_1); 518 sc->ex_factaddr[2] = val >> 8; 519 sc->ex_factaddr[3] = val & 0xff; 520 val = elxl_read_eeprom(sc, EE_OEM_ADDR_2); 521 sc->ex_factaddr[4] = val >> 8; 522 sc->ex_factaddr[5] = val & 0xff; 523 bcopy(sc->ex_factaddr, sc->ex_curraddr, 6); 524 525 sc->ex_capab = elxl_read_eeprom(sc, EE_CAPABILITIES); 526 527 /* 528 * Is this a 90XB? If bit 2 (supportsLargePackets) is set, or 529 * bit (supportsNoTxLength) is clear, then its a 90X. 530 * Otherwise its a 90XB. 531 */ 532 if ((sc->ex_capab & (1 << 2)) || !(sc->ex_capab & (1 << 9))) { 533 sc->ex_conf &= ~CONF_90XB; 534 } else { 535 sc->ex_conf |= CONF_90XB; 536 } 537 538 if (!ex_alloc_ring(sc, EX_NRX, &sc->ex_rxring, DDI_DMA_READ)) { 539 goto fail; 540 } 541 542 if (!ex_alloc_ring(sc, EX_NTX, &sc->ex_txring, DDI_DMA_WRITE)) { 543 goto fail; 544 } 545 546 elxl_probe_media(sc); 547 548 /* 549 * The probe may have indicated MII! 550 */ 551 if (sc->ex_mediaopt & (MEDIAOPT_MII | MEDIAOPT_100TX)) { 552 sc->ex_miih = mii_alloc(sc, sc->ex_dip, &ex_mii_ops); 553 if (sc->ex_miih == NULL) { 554 goto fail; 555 } 556 /* 557 * Note: The 90XB models can in theory support pause, 558 * but we're not enabling now due to lack of units for 559 * testing with. If this is changed, make sure to 560 * update the code in elxl_mii_notify to set the flow 561 * control field in the W3_MAC_CONTROL register. 562 */ 563 mii_set_pauseable(sc->ex_miih, B_FALSE, B_FALSE); 564 } 565 if ((macp = mac_alloc(MAC_VERSION)) == NULL) { 566 elxl_error(sc, "MAC register allocation failed"); 567 goto fail; 568 } 569 macp->m_type_ident = MAC_PLUGIN_IDENT_ETHER; 570 macp->m_driver = sc; 571 macp->m_dip = dip; 572 macp->m_src_addr = sc->ex_curraddr; 573 macp->m_callbacks = &elxl_m_callbacks; 574 macp->m_min_sdu = 0; 575 macp->m_max_sdu = ETHERMTU; 576 macp->m_margin = VLAN_TAGSZ; 577 macp->m_priv_props = ex_priv_prop; 578 macp->m_priv_prop_count = 2; 579 580 (void) ddi_intr_enable(sc->ex_intrh); 581 582 if (mac_register(macp, &sc->ex_mach) == DDI_SUCCESS) { 583 584 /* 585 * Note: we don't want to start link checking 586 * until *after* we have added the MAC handle. 587 */ 588 if (sc->ex_mediaopt & 589 (MEDIAOPT_MASK & ~(MEDIAOPT_MII | MEDIAOPT_100TX))) { 590 591 /* Check non-MII link state once per second. */ 592 sc->ex_linkcheck = 593 ddi_periodic_add(elxl_linkcheck, sc, 10000000, 0); 594 } 595 596 mac_free(macp); 597 return (DDI_SUCCESS); 598 } 599 600 mac_free(macp); 601 602 fail: 603 elxl_detach(sc); 604 return (DDI_FAILURE); 605 } 606 607 /* 608 * Find the media present on non-MII chips, and select the one to use. 609 */ 610 static void 611 elxl_probe_media(elxl_t *sc) 612 { 613 ex_media_t *exm; 614 uint32_t config; 615 uint32_t default_media; 616 uint16_t media_options; 617 618 SET_WIN(3); 619 config = GET32(W3_INTERNAL_CONFIG); 620 media_options = GET16(W3_MEDIAOPT); 621 622 /* 623 * We modify the media_options field so that we have a 624 * consistent view of the media available, without worrying 625 * about the version of ASIC, etc. 626 */ 627 628 /* 629 * 100BASE-TX is handled differently on 90XB from 90X. Older 630 * parts use the external MII to provide this support. 631 */ 632 if (sc->ex_conf & CONF_90XB) { 633 if (media_options & MEDIAOPT_100TX) { 634 /* 635 * 3Com advises that we should only ever use the 636 * auto mode. Notably, it seems that there should 637 * never be a 90XB board with the MEDIAOPT_10T bit set 638 * without this bit. If it happens, the driver will 639 * run in compatible 10BASE-T only mode. 640 */ 641 media_options &= ~MEDIAOPT_10T; 642 } 643 } else { 644 if (media_options & MEDIAOPT_100TX) { 645 /* 646 * If this occurs, we really want to use it like 647 * an MII device. Generally in this situation we 648 * want to use the MII exclusively, and there ought 649 * not be a 10bT transceiver. 650 */ 651 media_options |= MEDIAOPT_MII; 652 media_options &= ~MEDIAOPT_100TX; 653 media_options &= ~MEDIAOPT_10T; 654 655 /* 656 * Additionally, some of these devices map all 657 * internal PHY register at *every* address, not 658 * just the "allowed" address 24. 659 */ 660 sc->ex_conf |= CONF_INTPHY; 661 } 662 /* 663 * Early versions didn't have 10FL models, and used this 664 * bit for something else (VCO). 665 */ 666 media_options &= ~MEDIAOPT_10FL; 667 } 668 if (media_options & MEDIAOPT_100T4) { 669 /* 100BASE-T4 units all use the MII bus. */ 670 media_options |= MEDIAOPT_MII; 671 media_options &= ~MEDIAOPT_100T4; 672 } 673 674 /* Save our media options. */ 675 sc->ex_mediaopt = media_options; 676 677 #define APPEND_MEDIA(str, bit, name) \ 678 if (media_options & (bit)) { \ 679 (void) strlcat(str, *str ? "," : "", sizeof (str)); \ 680 (void) strlcat(str, name, sizeof (str)); \ 681 } 682 683 APPEND_MEDIA(sc->ex_medias, (MEDIAOPT_MII|MEDIAOPT_100TX), "mii"); 684 APPEND_MEDIA(sc->ex_medias, MEDIAOPT_10T, "tp-hdx,tp-fdx"); 685 APPEND_MEDIA(sc->ex_medias, MEDIAOPT_100FX, "fx-hdx,fx-fdx"); 686 APPEND_MEDIA(sc->ex_medias, MEDIAOPT_BNC, "bnc"); 687 APPEND_MEDIA(sc->ex_medias, MEDIAOPT_AUI, "aui"); 688 APPEND_MEDIA(sc->ex_medias, MEDIAOPT_10FL, "fl-hdx,fl-fdx"); 689 690 if (config & XCVR_SEL_100TX) { 691 /* Only found on 90XB. Don't use this, use AUTO instead! */ 692 config |= XCVR_SEL_AUTO; 693 config &= ~XCVR_SEL_100TX; 694 } 695 696 default_media = (config & XCVR_SEL_MASK); 697 698 /* Sanity check that there are any media! */ 699 if ((media_options & MEDIAOPT_MASK) == 0) { 700 elxl_error(sc, 701 "No media present? Attempting to use default."); 702 /* 703 * This "default" may be non-sensical. At worst it should 704 * cause a busted link. 705 */ 706 sc->ex_xcvr = default_media; 707 } 708 709 for (exm = ex_native_media; exm->exm_mpbit != 0; exm++) { 710 if (media_options & exm->exm_mpbit) { 711 if (exm->exm_xcvr == default_media) { 712 /* preferred default is present, just use it */ 713 sc->ex_xcvr = default_media; 714 return; 715 } 716 717 sc->ex_xcvr = exm->exm_xcvr; 718 /* but keep trying for other more preferred options */ 719 } 720 } 721 } 722 723 /* 724 * Setup transmitter parameters. 725 */ 726 static void 727 elxl_setup_tx(elxl_t *sc) 728 { 729 /* 730 * Disable reclaim threshold for 90xB, set free threshold to 731 * 6 * 256 = 1536 for 90x. 732 */ 733 if (sc->ex_conf & CONF_90XB) 734 PUT_CMD(CMD_SET_TXRECLAIM | 255); 735 else 736 PUT8(REG_TXFREETHRESH, 6); 737 738 /* 739 * We've seen underflows at the root cause of NIC hangs on 740 * older cards. Use a store-and-forward model to prevent that. 741 */ 742 PUT_CMD(CMD_SET_TXSTART | EX_BUFSZ >> 2); 743 } 744 745 /* 746 * Bring device up. 747 */ 748 static void 749 elxl_init(elxl_t *sc) 750 { 751 if (sc->ex_suspended) 752 return; 753 754 WAIT_CMD(sc); 755 elxl_stop(sc); 756 757 PUT_CMD(CMD_RX_RESET); 758 WAIT_CMD(sc); 759 PUT_CMD(CMD_TX_RESET); 760 WAIT_CMD(sc); 761 762 /* Load Tx parameters. */ 763 elxl_setup_tx(sc); 764 765 PUT32(REG_DMACTRL, GET32(REG_DMACTRL) | DMACTRL_UPRXEAREN); 766 767 PUT_CMD(CMD_IND_ENABLE | INT_WATCHED); 768 PUT_CMD(CMD_INT_ENABLE | INT_WATCHED); 769 770 PUT_CMD(CMD_INT_ACK | 0xff); 771 772 elxl_set_media(sc); 773 elxl_set_rxfilter(sc); 774 775 /* Configure for VLAN tag sizing. */ 776 SET_WIN(3); 777 if (sc->ex_conf & CONF_90XB) { 778 PUT16(W3_MAX_PKT_SIZE, EX_BUFSZ); 779 } else { 780 PUT16(W3_MAC_CONTROL, GET16(W3_MAC_CONTROL) | 781 MAC_CONTROL_ALLOW_LARGE); 782 } 783 784 PUT_CMD(CMD_SET_RXEARLY | (EX_BUFSZ >> 2)); 785 786 PUT_CMD(CMD_STATS_ENABLE); 787 PUT_CMD(CMD_TX_ENABLE); 788 PUT32(REG_UPLISTPTR, sc->ex_rxring.r_paddr); 789 PUT_CMD(CMD_RX_ENABLE); 790 PUT_CMD(CMD_UP_UNSTALL); 791 } 792 793 /* 794 * Set multicast receive filter. Also take care of promiscuous mode. 795 * Note that *some* of this hardware is fully capable of either a 256 796 * or 64 bit multicast hash. However, we can't determine what the 797 * size of the hash table is easily, and so we are expected to be able 798 * to resubmit the entire list of addresses each time. This puts an 799 * onerous burden on the driver to maintain its list of multicast 800 * addresses. Since multicast stuff is usually not that performance 801 * sensitive, and since we don't usually have much of it, we are just 802 * going to skip it. We allow the upper layers to filter it, as 803 * needed, by setting the all-multicast bit if the hardware can do it. 804 * This also reduces our test burden. 805 */ 806 static void 807 elxl_set_rxfilter(elxl_t *sc) 808 { 809 uint16_t mask = FILTER_UNICAST | FILTER_ALLBCAST; 810 811 if (sc->ex_suspended) 812 return; 813 814 /* 815 * Set the station address and clear the station mask. The latter 816 * is needed for 90x cards, 0 is the default for 90xB cards. 817 */ 818 SET_WIN(2); 819 for (int i = 0; i < ETHERADDRL; i++) { 820 PUT8(W2_STATION_ADDRESS + i, sc->ex_curraddr[i]); 821 PUT8(W2_STATION_MASK + i, 0); 822 } 823 824 if (sc->ex_mccount) { 825 mask |= FILTER_ALLMULTI; 826 } 827 if (sc->ex_promisc) { 828 mask |= FILTER_PROMISC; 829 } 830 PUT_CMD(CMD_SET_FILTER | mask); 831 } 832 833 static void 834 elxl_set_media(elxl_t *sc) 835 { 836 uint32_t configreg; 837 838 SET_WIN(4); 839 PUT16(W4_MEDIASTAT, 0); 840 PUT_CMD(CMD_BNC_DISABLE); 841 drv_usecwait(800); 842 843 /* 844 * Now turn on the selected media/transceiver. 845 */ 846 switch (sc->ex_xcvr) { 847 case XCVR_SEL_10T: 848 sc->ex_mii_active = B_FALSE; 849 PUT16(W4_MEDIASTAT, 850 MEDIASTAT_JABGUARD_EN | MEDIASTAT_LINKBEAT_EN); 851 drv_usecwait(800); 852 break; 853 854 case XCVR_SEL_BNC: 855 sc->ex_mii_active = B_FALSE; 856 PUT_CMD(CMD_BNC_ENABLE); 857 drv_usecwait(800); 858 break; 859 860 case XCVR_SEL_100FX: 861 sc->ex_mii_active = B_FALSE; /* Is this really true? */ 862 PUT16(W4_MEDIASTAT, MEDIASTAT_LINKBEAT_EN); 863 drv_usecwait(800); 864 break; 865 866 case XCVR_SEL_AUI: 867 sc->ex_mii_active = B_FALSE; 868 PUT16(W4_MEDIASTAT, MEDIASTAT_SQE_EN); 869 drv_usecwait(800); 870 break; 871 872 case XCVR_SEL_AUTO: 873 case XCVR_SEL_MII: 874 /* 875 * This is due to paranoia. If a card claims 876 * to default to MII, but doesn't have it set in 877 * media options, then we don't want to leave 878 * the MII active or we'll have problems derferencing 879 * the "mii handle". 880 */ 881 if (sc->ex_miih) { 882 sc->ex_mii_active = B_TRUE; 883 } else { 884 sc->ex_mii_active = B_FALSE; 885 } 886 break; 887 888 default: 889 sc->ex_mii_active = B_FALSE; 890 elxl_error(sc, "Impossible media setting!"); 891 break; 892 } 893 894 SET_WIN(3); 895 configreg = GET32(W3_INTERNAL_CONFIG); 896 897 configreg &= ~(XCVR_SEL_MASK); 898 configreg |= (sc->ex_xcvr); 899 900 PUT32(W3_INTERNAL_CONFIG, configreg); 901 902 /* 903 * If we're not using MII, force the full-duplex setting. MII 904 * based modes handle the full-duplex setting via the MII 905 * notify callback. 906 */ 907 if (!sc->ex_mii_active) { 908 uint16_t mctl; 909 mctl = GET16(W3_MAC_CONTROL); 910 if (sc->ex_fdx) { 911 mctl |= MAC_CONTROL_FDX; 912 } else { 913 mctl &= ~MAC_CONTROL_FDX; 914 } 915 PUT16(W3_MAC_CONTROL, mctl); 916 } 917 } 918 919 /* 920 * Get currently-selected media from card. 921 * (if_media callback, may be called before interface is brought up). 922 */ 923 static void 924 elxl_linkcheck(void *arg) 925 { 926 elxl_t *sc = arg; 927 uint16_t stat; 928 link_state_t link; 929 930 mutex_enter(&sc->ex_txlock); 931 if (sc->ex_mii_active) { 932 mutex_exit(&sc->ex_txlock); 933 return; 934 } 935 if (sc->ex_running && !sc->ex_suspended) { 936 switch (sc->ex_xcvr) { 937 case XCVR_SEL_100FX: 938 /* these media we can detect link on */ 939 SET_WIN(4); 940 stat = GET16(W4_MEDIASTAT); 941 if (stat & MEDIASTAT_LINKDETECT) { 942 sc->ex_link = LINK_STATE_UP; 943 sc->ex_speed = 100000000; 944 } else { 945 sc->ex_link = LINK_STATE_DOWN; 946 sc->ex_speed = 0; 947 } 948 break; 949 950 case XCVR_SEL_10T: 951 /* these media we can detect link on */ 952 SET_WIN(4); 953 stat = GET16(W4_MEDIASTAT); 954 if (stat & MEDIASTAT_LINKDETECT) { 955 sc->ex_link = LINK_STATE_UP; 956 sc->ex_speed = 10000000; 957 } else { 958 sc->ex_link = LINK_STATE_DOWN; 959 sc->ex_speed = 0; 960 } 961 break; 962 963 case XCVR_SEL_BNC: 964 case XCVR_SEL_AUI: 965 default: 966 /* 967 * For these we don't really know the answer, 968 * but if we lie then at least it won't cause 969 * ifconfig to turn off the RUNNING flag. 970 * This is necessary because we might 971 * transition from LINK_STATE_DOWN when 972 * switching media. 973 */ 974 sc->ex_speed = 10000000; 975 sc->ex_link = LINK_STATE_UP; 976 break; 977 } 978 SET_WIN(3); 979 sc->ex_duplex = GET16(W3_MAC_CONTROL) & MAC_CONTROL_FDX ? 980 LINK_DUPLEX_FULL : LINK_DUPLEX_HALF; 981 } else { 982 sc->ex_speed = 0; 983 sc->ex_duplex = LINK_DUPLEX_UNKNOWN; 984 sc->ex_link = LINK_STATE_UNKNOWN; 985 } 986 link = sc->ex_link; 987 mutex_exit(&sc->ex_txlock); 988 989 mac_link_update(sc->ex_mach, link); 990 } 991 992 static int 993 elxl_m_promisc(void *arg, boolean_t on) 994 { 995 elxl_t *sc = arg; 996 997 mutex_enter(&sc->ex_intrlock); 998 mutex_enter(&sc->ex_txlock); 999 sc->ex_promisc = on; 1000 elxl_set_rxfilter(sc); 1001 mutex_exit(&sc->ex_txlock); 1002 mutex_exit(&sc->ex_intrlock); 1003 return (0); 1004 } 1005 1006 static int 1007 elxl_m_multicst(void *arg, boolean_t add, const uint8_t *addr) 1008 { 1009 elxl_t *sc = arg; 1010 1011 _NOTE(ARGUNUSED(addr)); 1012 1013 mutex_enter(&sc->ex_intrlock); 1014 mutex_enter(&sc->ex_txlock); 1015 if (add) { 1016 sc->ex_mccount++; 1017 if (sc->ex_mccount == 1) { 1018 elxl_set_rxfilter(sc); 1019 } 1020 } else { 1021 sc->ex_mccount--; 1022 if (sc->ex_mccount == 0) { 1023 elxl_set_rxfilter(sc); 1024 } 1025 } 1026 mutex_exit(&sc->ex_txlock); 1027 mutex_exit(&sc->ex_intrlock); 1028 return (0); 1029 } 1030 1031 static int 1032 elxl_m_unicst(void *arg, const uint8_t *addr) 1033 { 1034 elxl_t *sc = arg; 1035 1036 mutex_enter(&sc->ex_intrlock); 1037 mutex_enter(&sc->ex_txlock); 1038 bcopy(addr, sc->ex_curraddr, ETHERADDRL); 1039 elxl_set_rxfilter(sc); 1040 mutex_exit(&sc->ex_txlock); 1041 mutex_exit(&sc->ex_intrlock); 1042 1043 return (0); 1044 } 1045 1046 static mblk_t * 1047 elxl_m_tx(void *arg, mblk_t *mp) 1048 { 1049 elxl_t *sc = arg; 1050 ex_desc_t *txd; 1051 ex_desc_t *first; 1052 ex_desc_t *tail; 1053 size_t len; 1054 ex_ring_t *r; 1055 ex_pd_t *pd; 1056 uint32_t cflags; 1057 mblk_t *nmp; 1058 boolean_t reenable = B_FALSE; 1059 boolean_t reset = B_FALSE; 1060 uint32_t paddr; 1061 1062 r = &sc->ex_txring; 1063 mutex_enter(&sc->ex_txlock); 1064 if (sc->ex_suspended) { 1065 while (mp != NULL) { 1066 sc->ex_nocarrier++; 1067 nmp = mp->b_next; 1068 freemsg(mp); 1069 mp = nmp; 1070 } 1071 mutex_exit(&sc->ex_txlock); 1072 return (NULL); 1073 } 1074 1075 for (int limit = (EX_NTX * 2); limit; limit--) { 1076 uint8_t stat = GET8(REG_TXSTATUS); 1077 if ((stat & TXSTATUS_COMPLETE) == 0) { 1078 break; 1079 } 1080 if (stat & TXSTATUS_MAXCOLLISIONS) { 1081 reenable = B_TRUE; 1082 sc->ex_excoll++; 1083 } 1084 if ((stat & TXSTATUS_ERRS) != 0) { 1085 reset = B_TRUE; 1086 if (stat & TXSTATUS_JABBER) { 1087 sc->ex_jabber++; 1088 } 1089 if (stat & TXSTATUS_RECLAIM_ERR) { 1090 sc->ex_txerr++; 1091 } 1092 if (stat & TXSTATUS_UNDERRUN) { 1093 sc->ex_uflo++; 1094 } 1095 } 1096 PUT8(REG_TXSTATUS, 0); 1097 } 1098 1099 if (reset || reenable) { 1100 paddr = GET32(REG_DNLISTPTR); 1101 if (reset) { 1102 WAIT_CMD(sc); 1103 PUT_CMD(CMD_TX_RESET); 1104 WAIT_CMD(sc); 1105 elxl_setup_tx(sc); 1106 } 1107 PUT_CMD(CMD_TX_ENABLE); 1108 if (paddr) { 1109 PUT32(REG_DNLISTPTR, paddr); 1110 } 1111 } 1112 1113 /* first reclaim any free descriptors */ 1114 while (r->r_avail < r->r_count) { 1115 1116 paddr = GET32(REG_DNLISTPTR); 1117 txd = r->r_head; 1118 if (paddr == txd->ed_descaddr) { 1119 /* still processing this one, we're done */ 1120 break; 1121 } 1122 if (paddr == 0) { 1123 /* done processing the entire list! */ 1124 r->r_head = NULL; 1125 r->r_tail = NULL; 1126 r->r_avail = r->r_count; 1127 break; 1128 } 1129 r->r_avail++; 1130 r->r_head = txd->ed_next; 1131 } 1132 1133 if ((r->r_avail < r->r_count) && (GET32(REG_DNLISTPTR) != 0)) { 1134 PUT_CMD(CMD_DN_STALL); 1135 WAIT_CMD(sc); 1136 } 1137 1138 first = NULL; 1139 tail = r->r_tail; 1140 1141 /* 1142 * If there is already a tx list, select the next desc on the list. 1143 * Otherwise, just pick the first descriptor. 1144 */ 1145 txd = tail ? tail->ed_next : &r->r_desc[0]; 1146 1147 while ((mp != NULL) && (r->r_avail)) { 1148 1149 nmp = mp->b_next; 1150 1151 len = msgsize(mp); 1152 if (len > (ETHERMAX + VLAN_TAGSZ)) { 1153 sc->ex_txerr++; 1154 freemsg(mp); 1155 mp = nmp; 1156 continue; 1157 } 1158 1159 cflags = 0; 1160 if ((sc->ex_conf & CONF_90XB) != 0) { 1161 uint32_t pflags; 1162 hcksum_retrieve(mp, NULL, NULL, NULL, NULL, NULL, NULL, 1163 &pflags); 1164 if (pflags & HCK_IPV4_HDRCKSUM) { 1165 cflags |= EX_DPD_IPCKSUM; 1166 } 1167 if (pflags & HCK_FULLCKSUM) { 1168 cflags |= (EX_DPD_TCPCKSUM | EX_DPD_UDPCKSUM); 1169 } 1170 } 1171 1172 /* Mark this descriptor is in use. We're committed now. */ 1173 mcopymsg(mp, txd->ed_buf); /* frees the mblk! */ 1174 r->r_avail--; 1175 mp = nmp; 1176 1177 /* Accounting stuff. */ 1178 sc->ex_opackets++; 1179 sc->ex_obytes += len; 1180 if (txd->ed_buf[0] & 0x1) { 1181 if (bcmp(txd->ed_buf, ex_broadcast, ETHERADDRL) != 0) { 1182 sc->ex_multixmt++; 1183 } else { 1184 sc->ex_brdcstxmt++; 1185 } 1186 } 1187 1188 pd = txd->ed_pd; 1189 1190 1191 /* 1192 * Zero pad the frame if its too short. This 1193 * also avoids a checksum offload bug. 1194 */ 1195 if (len < 30) { 1196 bzero(txd->ed_buf + len, ETHERMIN - len); 1197 len = ETHERMIN; 1198 } 1199 1200 /* 1201 * If this our first packet so far, record the head 1202 * of the list. 1203 */ 1204 if (first == NULL) { 1205 first = txd; 1206 } 1207 1208 (void) ddi_dma_sync(txd->ed_dmah, 0, 0, DDI_DMA_SYNC_FORDEV); 1209 1210 PUT_PD(r, pd->pd_link, 0); 1211 PUT_PD(r, pd->pd_fsh, len | cflags); 1212 PUT_PD(r, pd->pd_addr, txd->ed_bufaddr); 1213 PUT_PD(r, pd->pd_len, len | EX_FR_LAST); 1214 1215 /* 1216 * Write the link into the previous descriptor. Note that 1217 * if this is the first packet (so no previous queued), this 1218 * will be benign because the previous descriptor won't be 1219 * on any tx list. (Furthermore, we'll clear its link field 1220 * when we do later use it.) 1221 */ 1222 PUT_PD(r, txd->ed_prev->ed_pd->pd_link, txd->ed_descaddr); 1223 } 1224 1225 /* 1226 * Are we submitting any packets? 1227 */ 1228 if (first != NULL) { 1229 /* Interrupt on the last packet. */ 1230 PUT_PD(r, pd->pd_fsh, len | cflags | EX_DPD_DNIND); 1231 1232 if (tail == NULL) { 1233 /* No packets pending, so its a new list head! */ 1234 r->r_head = first; 1235 } else { 1236 pd = tail->ed_pd; 1237 /* We've added frames, so don't interrupt mid-list. */ 1238 PUT_PD(r, pd->pd_fsh, 1239 GET_PD(r, pd->pd_fsh) & ~(EX_DPD_DNIND)); 1240 } 1241 /* Record the last descriptor. */ 1242 r->r_tail = txd; 1243 1244 /* flush the entire ring - we're stopped so its safe */ 1245 (void) ddi_dma_sync(r->r_dmah, 0, 0, DDI_DMA_SYNC_FORDEV); 1246 } 1247 1248 /* Restart transmitter. */ 1249 if (sc->ex_txring.r_head) { 1250 PUT32(REG_DNLISTPTR, sc->ex_txring.r_head->ed_descaddr); 1251 } 1252 PUT_CMD(CMD_DN_UNSTALL); 1253 1254 mutex_exit(&sc->ex_txlock); 1255 1256 return (mp); 1257 } 1258 1259 static mblk_t * 1260 elxl_recv(elxl_t *sc, ex_desc_t *rxd, uint32_t stat) 1261 { 1262 mblk_t *mp = NULL; 1263 uint32_t len; 1264 1265 len = stat & EX_UPD_PKTLENMASK; 1266 if (stat & (EX_UPD_ERR_VLAN | EX_UPD_OVERFLOW)) { 1267 if (stat & EX_UPD_RUNT) { 1268 sc->ex_runt++; 1269 } 1270 if (stat & EX_UPD_OVERRUN) { 1271 sc->ex_oflo++; 1272 } 1273 if (stat & EX_UPD_CRCERR) { 1274 sc->ex_fcs++; 1275 } 1276 if (stat & EX_UPD_ALIGNERR) { 1277 sc->ex_align++; 1278 } 1279 if (stat & EX_UPD_OVERFLOW) { 1280 sc->ex_toolong++; 1281 } 1282 return (NULL); 1283 } 1284 if (len < sizeof (struct ether_header)) { 1285 sc->ex_runt++; 1286 return (NULL); 1287 } 1288 if (len > (ETHERMAX + VLAN_TAGSZ)) { 1289 /* Allow four bytes for the VLAN header */ 1290 sc->ex_toolong++; 1291 return (NULL); 1292 } 1293 if ((mp = allocb(len + 14, BPRI_HI)) == NULL) { 1294 sc->ex_allocbfail++; 1295 return (NULL); 1296 } 1297 1298 (void) ddi_dma_sync(rxd->ed_dmah, 0, 0, DDI_DMA_SYNC_FORKERNEL); 1299 mp->b_rptr += 14; 1300 mp->b_wptr = mp->b_rptr + len; 1301 bcopy(rxd->ed_buf, mp->b_rptr, len); 1302 1303 sc->ex_ipackets++; 1304 sc->ex_ibytes += len; 1305 if (rxd->ed_buf[0] & 0x1) { 1306 if (bcmp(rxd->ed_buf, ex_broadcast, ETHERADDRL) != 0) { 1307 sc->ex_multircv++; 1308 } else { 1309 sc->ex_brdcstrcv++; 1310 } 1311 } 1312 1313 /* 1314 * Set the incoming checksum information for the packet. 1315 */ 1316 if (((sc->ex_conf & CONF_90XB) != 0) && 1317 ((stat & EX_UPD_IPCHECKED) != 0) && 1318 ((stat & (EX_UPD_CKSUMERR)) == 0)) { 1319 uint32_t pflags = 0; 1320 if (stat & EX_UPD_IPCHECKED) { 1321 pflags |= HCK_IPV4_HDRCKSUM; 1322 } 1323 if (stat & (EX_UPD_TCPCHECKED | EX_UPD_UDPCHECKED)) { 1324 pflags |= (HCK_FULLCKSUM | HCK_FULLCKSUM_OK); 1325 } 1326 (void) hcksum_assoc(mp, NULL, NULL, 0, 0, 0, 0, pflags, 0); 1327 } 1328 1329 return (mp); 1330 } 1331 1332 static int 1333 elxl_m_start(void *arg) 1334 { 1335 elxl_t *sc = arg; 1336 1337 mutex_enter(&sc->ex_intrlock); 1338 mutex_enter(&sc->ex_txlock); 1339 1340 elxl_init(sc); 1341 sc->ex_running = B_TRUE; 1342 1343 mutex_exit(&sc->ex_txlock); 1344 mutex_exit(&sc->ex_intrlock); 1345 1346 if (sc->ex_miih) { 1347 mii_start(sc->ex_miih); 1348 } 1349 return (0); 1350 } 1351 1352 static void 1353 elxl_m_stop(void *arg) 1354 { 1355 elxl_t *sc = arg; 1356 1357 if (sc->ex_miih) { 1358 mii_stop(sc->ex_miih); 1359 } 1360 1361 mutex_enter(&sc->ex_intrlock); 1362 mutex_enter(&sc->ex_txlock); 1363 1364 elxl_stop(sc); 1365 sc->ex_running = B_FALSE; 1366 1367 mutex_exit(&sc->ex_txlock); 1368 mutex_exit(&sc->ex_intrlock); 1369 } 1370 1371 static boolean_t 1372 elxl_m_getcapab(void *arg, mac_capab_t cap, void *data) 1373 { 1374 elxl_t *sc = arg; 1375 switch (cap) { 1376 case MAC_CAPAB_HCKSUM: { 1377 uint32_t *flags = data; 1378 if (sc->ex_conf & CONF_90XB) { 1379 *flags = HCKSUM_IPHDRCKSUM | HCKSUM_INET_FULL_V4; 1380 return (B_TRUE); 1381 } 1382 return (B_FALSE); 1383 } 1384 default: 1385 return (B_FALSE); 1386 } 1387 } 1388 1389 static int 1390 elxl_m_getprop(void *arg, const char *name, mac_prop_id_t num, uint_t flags, 1391 uint_t sz, void *val, uint_t *perm) 1392 { 1393 elxl_t *sc = arg; 1394 int rv; 1395 boolean_t isdef = (flags & MAC_PROP_DEFAULT); 1396 1397 if (sc->ex_mii_active) { 1398 rv = mii_m_getprop(sc->ex_miih, name, num, flags, sz, 1399 val, perm); 1400 if (rv != ENOTSUP) 1401 return (rv); 1402 } 1403 1404 switch (num) { 1405 case MAC_PROP_DUPLEX: 1406 *perm = MAC_PROP_PERM_READ; 1407 *(uint8_t *)val = isdef ? LINK_DUPLEX_HALF : sc->ex_duplex; 1408 break; 1409 case MAC_PROP_SPEED: 1410 *perm = MAC_PROP_PERM_READ; 1411 *(uint8_t *)val = sc->ex_speed; 1412 break; 1413 case MAC_PROP_STATUS: 1414 *perm = MAC_PROP_PERM_READ; 1415 bcopy(&sc->ex_link, val, sizeof (link_state_t)); 1416 break; 1417 1418 case MAC_PROP_PRIVATE: 1419 if (strcmp(name, "_media") == 0) { 1420 char *str; 1421 *perm = MAC_PROP_PERM_RW; 1422 1423 switch (sc->ex_xcvr) { 1424 case XCVR_SEL_AUTO: 1425 case XCVR_SEL_MII: 1426 str = "mii"; 1427 break; 1428 case XCVR_SEL_10T: 1429 str = sc->ex_fdx ? "tp-fdx" : "tp-hdx"; 1430 break; 1431 case XCVR_SEL_BNC: 1432 str = "bnc"; 1433 break; 1434 case XCVR_SEL_AUI: 1435 if (sc->ex_mediaopt & MEDIAOPT_10FL) { 1436 str = sc->ex_fdx ? "fl-fdx" : "fl-hdx"; 1437 } else { 1438 str = "aui"; 1439 } 1440 break; 1441 case XCVR_SEL_100FX: 1442 str = sc->ex_fdx ? "fx-fdx" : "fx-hdx"; 1443 break; 1444 default: 1445 str = "unknown"; 1446 break; 1447 } 1448 (void) snprintf(val, sz, "%s", str); 1449 return (0); 1450 } 1451 /* 1452 * This available media property is a hack, and should 1453 * be removed when we can provide proper support for 1454 * querying it as proposed in PSARC 2009/235. (At the 1455 * moment the implementation lacks support for using 1456 * MAC_PROP_POSSIBLE with private properties.) 1457 */ 1458 if (strcmp(name, "_available_media") == 0) { 1459 *perm = MAC_PROP_PERM_READ; 1460 (void) snprintf(val, sz, "%s", sc->ex_medias); 1461 return (0); 1462 } 1463 break; 1464 } 1465 return (ENOTSUP); 1466 } 1467 1468 static int 1469 elxl_m_setprop(void *arg, const char *name, mac_prop_id_t num, uint_t sz, 1470 const void *val) 1471 { 1472 elxl_t *sc = arg; 1473 int rv; 1474 1475 if (sc->ex_mii_active) { 1476 rv = mii_m_setprop(sc->ex_miih, name, num, sz, val); 1477 if (rv != ENOTSUP) { 1478 return (rv); 1479 } 1480 } 1481 switch (num) { 1482 1483 case MAC_PROP_PRIVATE: 1484 if (strcmp(name, "_media") == 0) { 1485 uint32_t mopt = sc->ex_mediaopt; 1486 1487 if (strcmp(val, "mii") == 0) { 1488 if (mopt & MEDIAOPT_100TX) { 1489 sc->ex_xcvr = XCVR_SEL_AUTO; 1490 } else if (mopt & MEDIAOPT_MII) { 1491 sc->ex_xcvr = XCVR_SEL_MII; 1492 } else { 1493 return (EINVAL); 1494 } 1495 } else if (strcmp(val, "tp-fdx") == 0) { 1496 /* select media option */ 1497 if (mopt & MEDIAOPT_10T) { 1498 sc->ex_xcvr = XCVR_SEL_10T; 1499 sc->ex_fdx = B_TRUE; 1500 } else { 1501 return (EINVAL); 1502 } 1503 } else if (strcmp(val, "tp-hdx") == 0) { 1504 /* select media option */ 1505 if (mopt & MEDIAOPT_10T) { 1506 sc->ex_xcvr = XCVR_SEL_10T; 1507 sc->ex_fdx = B_FALSE; 1508 } else { 1509 return (EINVAL); 1510 } 1511 } else if (strcmp(val, "fx-fdx") == 0) { 1512 if (mopt & MEDIAOPT_100FX) { 1513 sc->ex_xcvr = XCVR_SEL_100FX; 1514 sc->ex_fdx = B_TRUE; 1515 } else { 1516 return (EINVAL); 1517 } 1518 } else if (strcmp(val, "fx-hdx") == 0) { 1519 if (mopt & MEDIAOPT_100FX) { 1520 sc->ex_xcvr = XCVR_SEL_100FX; 1521 sc->ex_fdx = B_FALSE; 1522 } else { 1523 return (EINVAL); 1524 } 1525 } else if (strcmp(val, "bnc") == 0) { 1526 if (mopt & MEDIAOPT_BNC) { 1527 sc->ex_xcvr = XCVR_SEL_BNC; 1528 sc->ex_fdx = B_FALSE; 1529 } else { 1530 return (EINVAL); 1531 } 1532 } else if (strcmp(val, "aui") == 0) { 1533 if (mopt & MEDIAOPT_AUI) { 1534 sc->ex_xcvr = XCVR_SEL_AUI; 1535 sc->ex_fdx = B_FALSE; 1536 } else { 1537 return (EINVAL); 1538 } 1539 } else if (strcmp(val, "fl-fdx") == 0) { 1540 if (mopt & MEDIAOPT_10FL) { 1541 sc->ex_xcvr = XCVR_SEL_AUI; 1542 sc->ex_fdx = B_TRUE; 1543 } else { 1544 return (EINVAL); 1545 } 1546 } else if (strcmp(val, "fl-hdx") == 0) { 1547 if (mopt & MEDIAOPT_10FL) { 1548 sc->ex_xcvr = XCVR_SEL_AUI; 1549 sc->ex_fdx = B_FALSE; 1550 } else { 1551 return (EINVAL); 1552 } 1553 1554 } else { 1555 return (EINVAL); 1556 } 1557 goto reset; 1558 } 1559 break; 1560 default: 1561 break; 1562 } 1563 1564 return (ENOTSUP); 1565 1566 reset: 1567 mutex_enter(&sc->ex_intrlock); 1568 mutex_enter(&sc->ex_txlock); 1569 if (!sc->ex_suspended) { 1570 elxl_reset(sc); 1571 if (sc->ex_running) { 1572 elxl_init(sc); 1573 } 1574 } 1575 mutex_exit(&sc->ex_txlock); 1576 mutex_exit(&sc->ex_intrlock); 1577 return (0); 1578 } 1579 1580 static int 1581 elxl_m_stat(void *arg, uint_t stat, uint64_t *val) 1582 { 1583 elxl_t *sc = arg; 1584 1585 if (stat == MAC_STAT_IFSPEED) { 1586 elxl_getstats(sc); 1587 } 1588 1589 if ((sc->ex_mii_active) && 1590 (mii_m_getstat(sc->ex_miih, stat, val) == 0)) { 1591 return (0); 1592 } 1593 1594 switch (stat) { 1595 case MAC_STAT_IFSPEED: 1596 *val = sc->ex_speed; 1597 break; 1598 1599 case ETHER_STAT_LINK_DUPLEX: 1600 *val = sc->ex_duplex; 1601 break; 1602 1603 case MAC_STAT_MULTIRCV: 1604 *val = sc->ex_multircv; 1605 break; 1606 1607 case MAC_STAT_BRDCSTRCV: 1608 *val = sc->ex_brdcstrcv; 1609 break; 1610 1611 case MAC_STAT_MULTIXMT: 1612 *val = sc->ex_multixmt; 1613 break; 1614 1615 case MAC_STAT_BRDCSTXMT: 1616 *val = sc->ex_brdcstxmt; 1617 break; 1618 1619 case MAC_STAT_IPACKETS: 1620 *val = sc->ex_ipackets; 1621 break; 1622 1623 case MAC_STAT_OPACKETS: 1624 *val = sc->ex_opackets; 1625 break; 1626 1627 case MAC_STAT_RBYTES: 1628 *val = sc->ex_ibytes; 1629 break; 1630 case MAC_STAT_OBYTES: 1631 *val = sc->ex_obytes; 1632 break; 1633 1634 case MAC_STAT_COLLISIONS: 1635 case ETHER_STAT_FIRST_COLLISIONS: 1636 *val = sc->ex_singlecol + sc->ex_multcol; 1637 break; 1638 1639 case ETHER_STAT_MULTI_COLLISIONS: 1640 *val = sc->ex_multcol; 1641 break; 1642 1643 case ETHER_STAT_TX_LATE_COLLISIONS: 1644 *val = sc->ex_latecol; 1645 break; 1646 1647 case ETHER_STAT_ALIGN_ERRORS: 1648 *val = sc->ex_align; 1649 break; 1650 1651 case ETHER_STAT_FCS_ERRORS: 1652 *val = sc->ex_fcs; 1653 break; 1654 1655 case ETHER_STAT_SQE_ERRORS: 1656 *val = sc->ex_sqe; 1657 break; 1658 1659 case ETHER_STAT_DEFER_XMTS: 1660 *val = sc->ex_defer; 1661 break; 1662 1663 case ETHER_STAT_CARRIER_ERRORS: 1664 *val = sc->ex_nocarrier; 1665 break; 1666 1667 case ETHER_STAT_TOOLONG_ERRORS: 1668 *val = sc->ex_toolong; 1669 break; 1670 1671 case ETHER_STAT_EX_COLLISIONS: 1672 *val = sc->ex_excoll; 1673 break; 1674 1675 case MAC_STAT_OVERFLOWS: 1676 *val = sc->ex_oflo; 1677 break; 1678 1679 case MAC_STAT_UNDERFLOWS: 1680 *val = sc->ex_uflo; 1681 break; 1682 1683 case ETHER_STAT_TOOSHORT_ERRORS: 1684 *val = sc->ex_runt; 1685 break; 1686 1687 case ETHER_STAT_JABBER_ERRORS: 1688 *val = sc->ex_jabber; 1689 break; 1690 1691 case MAC_STAT_NORCVBUF: 1692 *val = sc->ex_allocbfail; 1693 break; 1694 1695 case MAC_STAT_OERRORS: 1696 *val = sc->ex_jabber + sc->ex_latecol + sc->ex_uflo; 1697 break; 1698 1699 case MAC_STAT_IERRORS: 1700 *val = sc->ex_align + sc->ex_fcs + sc->ex_runt + 1701 sc->ex_toolong + sc->ex_oflo + sc->ex_allocbfail; 1702 break; 1703 1704 default: 1705 return (ENOTSUP); 1706 } 1707 return (0); 1708 } 1709 1710 static uint_t 1711 elxl_intr(caddr_t arg, caddr_t dontcare) 1712 { 1713 elxl_t *sc = (void *)arg; 1714 uint16_t stat; 1715 mblk_t *mphead = NULL; 1716 mblk_t **mpp = &mphead; 1717 1718 _NOTE(ARGUNUSED(dontcare)); 1719 1720 mutex_enter(&sc->ex_intrlock); 1721 if (sc->ex_suspended) { 1722 mutex_exit(&sc->ex_intrlock); 1723 return (DDI_INTR_UNCLAIMED); 1724 } 1725 1726 stat = GET16(REG_CMD_STAT); 1727 1728 if ((stat & INT_LATCH) == 0) { 1729 mutex_exit(&sc->ex_intrlock); 1730 return (DDI_INTR_UNCLAIMED); 1731 } 1732 1733 /* 1734 * Acknowledge interrupts. 1735 */ 1736 PUT_CMD(CMD_INT_ACK | (stat & INT_WATCHED) | INT_LATCH); 1737 1738 if (stat & INT_HOST_ERROR) { 1739 /* XXX: Potentially a good spot for FMA */ 1740 elxl_error(sc, "Adapter failure (%x)", stat); 1741 mutex_enter(&sc->ex_txlock); 1742 elxl_reset(sc); 1743 if (sc->ex_running) 1744 elxl_init(sc); 1745 mutex_exit(&sc->ex_txlock); 1746 mutex_exit(&sc->ex_intrlock); 1747 return (DDI_INTR_CLAIMED); 1748 } 1749 if (stat & INT_UP_COMPLETE) { 1750 ex_ring_t *r; 1751 ex_desc_t *rxd; 1752 ex_pd_t *pd; 1753 mblk_t *mp; 1754 uint32_t pktstat; 1755 1756 r = &sc->ex_rxring; 1757 1758 for (;;) { 1759 rxd = r->r_head; 1760 pd = rxd->ed_pd; 1761 1762 (void) ddi_dma_sync(r->r_dmah, rxd->ed_off, 1763 sizeof (ex_pd_t), DDI_DMA_SYNC_FORKERNEL); 1764 1765 pktstat = GET_PD(r, pd->pd_status); 1766 1767 if ((pktstat & EX_UPD_COMPLETE) == 0) { 1768 break; 1769 } 1770 1771 /* Advance head to next packet. */ 1772 r->r_head = r->r_head->ed_next; 1773 1774 if ((mp = elxl_recv(sc, rxd, pktstat)) != NULL) { 1775 *mpp = mp; 1776 mpp = &mp->b_next; 1777 } 1778 1779 /* clear the upComplete status, reset other fields */ 1780 PUT_PD(r, pd->pd_status, 0); 1781 PUT_PD(r, pd->pd_len, EX_BUFSZ | EX_FR_LAST); 1782 PUT_PD(r, pd->pd_addr, rxd->ed_bufaddr); 1783 (void) ddi_dma_sync(r->r_dmah, rxd->ed_off, 1784 sizeof (ex_pd_t), DDI_DMA_SYNC_FORDEV); 1785 } 1786 1787 /* 1788 * If the engine stalled processing (due to 1789 * insufficient UPDs usually), restart it. 1790 */ 1791 if (GET32(REG_UPLISTPTR) == 0) { 1792 /* 1793 * This seems that it can happen in an RX overrun 1794 * situation. 1795 */ 1796 mutex_enter(&sc->ex_txlock); 1797 if (sc->ex_running) 1798 elxl_init(sc); 1799 mutex_exit(&sc->ex_txlock); 1800 } 1801 PUT_CMD(CMD_UP_UNSTALL); 1802 } 1803 1804 mutex_exit(&sc->ex_intrlock); 1805 1806 if (mphead) { 1807 mac_rx(sc->ex_mach, NULL, mphead); 1808 } 1809 if (stat & INT_STATS) { 1810 elxl_getstats(sc); 1811 } 1812 if (stat & INT_DN_COMPLETE) { 1813 mac_tx_update(sc->ex_mach); 1814 } 1815 1816 return (DDI_INTR_CLAIMED); 1817 } 1818 1819 static void 1820 elxl_getstats(elxl_t *sc) 1821 { 1822 mutex_enter(&sc->ex_txlock); 1823 if (sc->ex_suspended) { 1824 mutex_exit(&sc->ex_txlock); 1825 return; 1826 } 1827 1828 SET_WIN(6); 1829 /* 1830 * We count the packets and bytes elsewhere, but we need to 1831 * read the registers to clear them. 1832 */ 1833 (void) GET8(W6_RX_FRAMES); 1834 (void) GET8(W6_TX_FRAMES); 1835 (void) GET8(W6_UPPER_FRAMES); 1836 (void) GET8(W6_RX_OVERRUNS); /* counted by elxl_recv */ 1837 (void) GET16(W6_RX_BYTES); 1838 (void) GET16(W6_TX_BYTES); 1839 1840 sc->ex_defer += GET8(W6_DEFER); 1841 sc->ex_latecol += GET8(W6_TX_LATE_COL); 1842 sc->ex_singlecol += GET8(W6_SINGLE_COL); 1843 sc->ex_multcol += GET8(W6_MULT_COL); 1844 sc->ex_sqe += GET8(W6_SQE_ERRORS); 1845 sc->ex_nocarrier += GET8(W6_NO_CARRIER); 1846 1847 SET_WIN(4); 1848 /* Note: we ought to report this somewhere... */ 1849 (void) GET8(W4_BADSSD); 1850 1851 mutex_exit(&sc->ex_txlock); 1852 } 1853 1854 static void 1855 elxl_reset(elxl_t *sc) 1856 { 1857 PUT_CMD(CMD_GLOBAL_RESET); 1858 /* 1859 * Some ASICs need a longer time (20 ms) to come properly out 1860 * of reset. Do not reduce this value. 1861 * 1862 * Note that this occurs only during attach and failure recovery, 1863 * so it should be mostly harmless. 1864 */ 1865 drv_usecwait(20000); 1866 WAIT_CMD(sc); 1867 } 1868 1869 static void 1870 elxl_stop(elxl_t *sc) 1871 { 1872 ASSERT(mutex_owned(&sc->ex_intrlock)); 1873 ASSERT(mutex_owned(&sc->ex_txlock)); 1874 1875 if (sc->ex_suspended) 1876 return; 1877 1878 PUT_CMD(CMD_RX_DISABLE); 1879 PUT_CMD(CMD_TX_DISABLE); 1880 PUT_CMD(CMD_BNC_DISABLE); 1881 1882 elxl_reset_ring(&sc->ex_rxring, DDI_DMA_READ); 1883 elxl_reset_ring(&sc->ex_txring, DDI_DMA_WRITE); 1884 1885 PUT_CMD(CMD_INT_ACK | INT_LATCH); 1886 /* Disable all interrupts. (0 means "none".) */ 1887 PUT_CMD(CMD_INT_ENABLE | 0); 1888 } 1889 1890 static void 1891 elxl_suspend(elxl_t *sc) 1892 { 1893 if (sc->ex_miih) { 1894 mii_suspend(sc->ex_miih); 1895 } 1896 1897 mutex_enter(&sc->ex_intrlock); 1898 mutex_enter(&sc->ex_txlock); 1899 elxl_stop(sc); 1900 sc->ex_suspended = B_TRUE; 1901 mutex_exit(&sc->ex_txlock); 1902 mutex_exit(&sc->ex_intrlock); 1903 } 1904 1905 static void 1906 elxl_resume(dev_info_t *dip) 1907 { 1908 elxl_t *sc; 1909 1910 /* This should always succeed. */ 1911 sc = ddi_get_driver_private(dip); 1912 ASSERT(sc); 1913 1914 mutex_enter(&sc->ex_intrlock); 1915 mutex_enter(&sc->ex_txlock); 1916 sc->ex_suspended = B_FALSE; 1917 elxl_reset(sc); 1918 if (sc->ex_running) 1919 elxl_init(sc); 1920 mutex_exit(&sc->ex_txlock); 1921 mutex_exit(&sc->ex_intrlock); 1922 1923 if (sc->ex_miih) { 1924 mii_resume(sc->ex_miih); 1925 } 1926 } 1927 1928 static void 1929 elxl_detach(elxl_t *sc) 1930 { 1931 if (sc->ex_miih) { 1932 /* Detach all PHYs */ 1933 mii_free(sc->ex_miih); 1934 } 1935 if (sc->ex_linkcheck) { 1936 ddi_periodic_delete(sc->ex_linkcheck); 1937 } 1938 1939 if (sc->ex_intrh != NULL) { 1940 (void) ddi_intr_disable(sc->ex_intrh); 1941 (void) ddi_intr_remove_handler(sc->ex_intrh); 1942 (void) ddi_intr_free(sc->ex_intrh); 1943 mutex_destroy(&sc->ex_intrlock); 1944 mutex_destroy(&sc->ex_txlock); 1945 } 1946 1947 if (sc->ex_pcih) { 1948 pci_config_teardown(&sc->ex_pcih); 1949 } 1950 if (sc->ex_regsh) { 1951 ddi_regs_map_free(&sc->ex_regsh); 1952 } 1953 ex_free_ring(&sc->ex_txring); 1954 ex_free_ring(&sc->ex_rxring); 1955 1956 kmem_free(sc, sizeof (*sc)); 1957 } 1958 1959 /* 1960 * Read EEPROM data. If we can't unbusy the EEPROM, then zero will be 1961 * returned. This will probably result in a bogus node address. 1962 */ 1963 static uint16_t 1964 elxl_read_eeprom(elxl_t *sc, int offset) 1965 { 1966 uint16_t data = 0; 1967 1968 SET_WIN(0); 1969 if (elxl_eeprom_busy(sc)) 1970 goto out; 1971 1972 PUT16(W0_EE_CMD, EE_CMD_READ | (offset & 0x3f)); 1973 if (elxl_eeprom_busy(sc)) 1974 goto out; 1975 data = GET16(W0_EE_DATA); 1976 out: 1977 return (data); 1978 } 1979 1980 static int 1981 elxl_eeprom_busy(elxl_t *sc) 1982 { 1983 int i = 2000; 1984 1985 while (i--) { 1986 if (!(GET16(W0_EE_CMD) & EE_CMD_BUSY)) 1987 return (0); 1988 drv_usecwait(100); 1989 } 1990 elxl_error(sc, "Eeprom stays busy."); 1991 return (1); 1992 } 1993 1994 static void 1995 ex_mii_send_bits(struct ex_softc *sc, uint16_t bits, int cnt) 1996 { 1997 uint16_t val; 1998 ASSERT(cnt > 0); 1999 2000 PUT16(W4_PHYSMGMT, PHYSMGMT_DIR); 2001 drv_usecwait(1); 2002 2003 for (int i = (1 << (cnt - 1)); i; i >>= 1) { 2004 if (bits & i) { 2005 val = PHYSMGMT_DIR | PHYSMGMT_DATA; 2006 } else { 2007 val = PHYSMGMT_DIR; 2008 } 2009 PUT16(W4_PHYSMGMT, val); 2010 drv_usecwait(1); 2011 PUT16(W4_PHYSMGMT, val | PHYSMGMT_CLK); 2012 drv_usecwait(1); 2013 PUT16(W4_PHYSMGMT, val); 2014 drv_usecwait(1); 2015 } 2016 } 2017 2018 static void 2019 ex_mii_sync(struct ex_softc *sc) 2020 { 2021 /* 2022 * We set the data bit output, and strobe the clock 32 times. 2023 */ 2024 PUT16(W4_PHYSMGMT, PHYSMGMT_DATA | PHYSMGMT_DIR); 2025 drv_usecwait(1); 2026 2027 for (int i = 0; i < 32; i++) { 2028 PUT16(W4_PHYSMGMT, PHYSMGMT_DATA | PHYSMGMT_DIR | PHYSMGMT_CLK); 2029 drv_usecwait(1); 2030 PUT16(W4_PHYSMGMT, PHYSMGMT_DATA | PHYSMGMT_DIR); 2031 drv_usecwait(1); 2032 } 2033 } 2034 2035 static uint16_t 2036 elxl_mii_read(void *arg, uint8_t phy, uint8_t reg) 2037 { 2038 elxl_t *sc = arg; 2039 uint16_t data; 2040 int val; 2041 2042 if ((sc->ex_conf & CONF_INTPHY) && phy != INTPHY_ID) 2043 return (0xffff); 2044 2045 mutex_enter(&sc->ex_txlock); 2046 SET_WIN(4); 2047 2048 ex_mii_sync(sc); 2049 2050 ex_mii_send_bits(sc, 1, 2); /* start */ 2051 ex_mii_send_bits(sc, 2, 2); /* read command */ 2052 ex_mii_send_bits(sc, phy, 5); 2053 ex_mii_send_bits(sc, reg, 5); 2054 2055 PUT16(W4_PHYSMGMT, 0); /* switch to input */ 2056 drv_usecwait(1); 2057 PUT16(W4_PHYSMGMT, PHYSMGMT_CLK); /* turnaround time */ 2058 drv_usecwait(1); 2059 PUT16(W4_PHYSMGMT, 0); 2060 drv_usecwait(1); 2061 2062 PUT16(W4_PHYSMGMT, PHYSMGMT_CLK); /* idle time */ 2063 drv_usecwait(1); 2064 PUT16(W4_PHYSMGMT, 0); 2065 drv_usecwait(1); 2066 2067 for (data = 0, val = 0x8000; val; val >>= 1) { 2068 if (GET16(W4_PHYSMGMT) & PHYSMGMT_DATA) { 2069 data |= val; 2070 } 2071 /* strobe the clock */ 2072 PUT16(W4_PHYSMGMT, PHYSMGMT_CLK); 2073 drv_usecwait(1); 2074 PUT16(W4_PHYSMGMT, 0); 2075 drv_usecwait(1); 2076 } 2077 2078 /* return to output mode */ 2079 PUT16(W4_PHYSMGMT, PHYSMGMT_DIR); 2080 drv_usecwait(1); 2081 2082 mutex_exit(&sc->ex_txlock); 2083 2084 return (data); 2085 } 2086 2087 static void 2088 elxl_mii_write(void *arg, uint8_t phy, uint8_t reg, uint16_t data) 2089 { 2090 elxl_t *sc = arg; 2091 2092 if ((sc->ex_conf & CONF_INTPHY) && phy != INTPHY_ID) 2093 return; 2094 2095 mutex_enter(&sc->ex_txlock); 2096 SET_WIN(4); 2097 2098 ex_mii_sync(sc); 2099 ex_mii_send_bits(sc, 1, 2); /* start */ 2100 ex_mii_send_bits(sc, 1, 2); /* write */ 2101 ex_mii_send_bits(sc, phy, 5); 2102 ex_mii_send_bits(sc, reg, 5); 2103 ex_mii_send_bits(sc, 2, 2); /* ack/turnaround */ 2104 ex_mii_send_bits(sc, data, 16); 2105 2106 /* return to output mode */ 2107 PUT16(W4_PHYSMGMT, PHYSMGMT_DIR); 2108 drv_usecwait(1); 2109 2110 mutex_exit(&sc->ex_txlock); 2111 } 2112 2113 static void 2114 elxl_mii_notify(void *arg, link_state_t link) 2115 { 2116 elxl_t *sc = arg; 2117 int mctl; 2118 link_duplex_t duplex; 2119 2120 duplex = mii_get_duplex(sc->ex_miih); 2121 2122 mutex_enter(&sc->ex_txlock); 2123 if (!sc->ex_mii_active) { 2124 /* If we're using some other legacy media, bail out now */ 2125 mutex_exit(&sc->ex_txlock); 2126 return; 2127 } 2128 if (!sc->ex_suspended) { 2129 SET_WIN(3); 2130 mctl = GET16(W3_MAC_CONTROL); 2131 if (duplex == LINK_DUPLEX_FULL) 2132 mctl |= MAC_CONTROL_FDX; 2133 else 2134 mctl &= ~MAC_CONTROL_FDX; 2135 PUT16(W3_MAC_CONTROL, mctl); 2136 } 2137 mutex_exit(&sc->ex_txlock); 2138 2139 mac_link_update(sc->ex_mach, link); 2140 } 2141 2142 static int 2143 elxl_ddi_attach(dev_info_t *dip, ddi_attach_cmd_t cmd) 2144 { 2145 switch (cmd) { 2146 case DDI_ATTACH: 2147 return (elxl_attach(dip)); 2148 2149 case DDI_RESUME: 2150 elxl_resume(dip); 2151 return (DDI_SUCCESS); 2152 2153 default: 2154 return (DDI_FAILURE); 2155 } 2156 } 2157 2158 static int 2159 elxl_ddi_detach(dev_info_t *dip, ddi_detach_cmd_t cmd) 2160 { 2161 elxl_t *sc; 2162 2163 sc = ddi_get_driver_private(dip); 2164 ASSERT(sc); 2165 2166 switch (cmd) { 2167 case DDI_DETACH: 2168 if (mac_disable(sc->ex_mach) != 0) { 2169 return (DDI_FAILURE); 2170 } 2171 elxl_detach(sc); 2172 (void) mac_unregister(sc->ex_mach); 2173 return (DDI_SUCCESS); 2174 2175 case DDI_SUSPEND: 2176 elxl_suspend(sc); 2177 return (DDI_SUCCESS); 2178 2179 default: 2180 return (DDI_FAILURE); 2181 } 2182 } 2183 2184 static int 2185 elxl_ddi_quiesce(dev_info_t *dip) 2186 { 2187 elxl_t *sc; 2188 2189 sc = ddi_get_driver_private(dip); 2190 ASSERT(sc); 2191 2192 if (!sc->ex_suspended) 2193 elxl_reset(sc); 2194 return (DDI_SUCCESS); 2195 } 2196 2197 static void 2198 elxl_error(elxl_t *sc, char *fmt, ...) 2199 { 2200 va_list ap; 2201 char buf[256]; 2202 2203 va_start(ap, fmt); 2204 (void) vsnprintf(buf, sizeof (buf), fmt, ap); 2205 va_end(ap); 2206 2207 cmn_err(CE_WARN, "%s%d: %s", 2208 ddi_driver_name(sc->ex_dip), ddi_get_instance(sc->ex_dip), buf); 2209 } 2210