xref: /illumos-gate/usr/src/uts/common/io/chxge/ch.c (revision ed093b41a93e8563e6e1e5dae0768dda2a7bcc27)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  * Copyright 2018 Joyent, Inc.
26  */
27 
28 /*
29  * This file is part of the Chelsio T1 Ethernet driver.
30  *
31  * Copyright (C) 2003-2005 Chelsio Communications.  All rights reserved.
32  */
33 
34 /*
35  * Solaris Multithreaded STREAMS DLPI Chelsio PCI Ethernet Driver
36  */
37 
38 /* #define CH_DEBUG 1 */
39 #ifdef CH_DEBUG
40 #define	DEBUG_ENTER(a) debug_enter(a)
41 #define	PRINT(a) printf a
42 #else
43 #define	DEBUG_ENTER(a)
44 #define	PRINT(a)
45 #endif
46 
47 #include <sys/types.h>
48 #include <sys/conf.h>
49 #include <sys/debug.h>
50 #include <sys/stropts.h>
51 #include <sys/stream.h>
52 #include <sys/strlog.h>
53 #include <sys/kmem.h>
54 #include <sys/stat.h>
55 #include <sys/kstat.h>
56 #include <sys/modctl.h>
57 #include <sys/errno.h>
58 #include <sys/cmn_err.h>
59 #include <sys/ddi.h>
60 #include <sys/sunddi.h>
61 #include <sys/dlpi.h>
62 #include <sys/ethernet.h>
63 #include <sys/mac_provider.h>
64 #include <sys/strsun.h>
65 #include <sys/strsubr.h>
66 #include <inet/common.h>
67 #include <inet/nd.h>
68 #include <inet/ip.h>
69 #include <inet/tcp.h>
70 #include <sys/pattr.h>
71 #include <sys/gld.h>
72 #include "ostypes.h"
73 #include "common.h"
74 #include "oschtoe.h"
75 #include "sge.h"
76 #include "regs.h"
77 #include "ch.h"			/* Chelsio Driver specific parameters */
78 #include "version.h"
79 
80 /*
81  * Function prototypes.
82  */
83 static int ch_attach(dev_info_t *, ddi_attach_cmd_t);
84 static int ch_detach(dev_info_t *, ddi_detach_cmd_t);
85 static int ch_quiesce(dev_info_t *);
86 static void ch_free_dma_handles(ch_t *chp);
87 static void ch_set_name(ch_t *chp, int unit);
88 static void ch_free_name(ch_t *chp);
89 static void ch_get_prop(ch_t *chp);
90 
91 #if defined(__sparc)
92 static void ch_free_dvma_handles(ch_t *chp);
93 #endif
94 
95 /* GLD interfaces */
96 static int ch_reset(gld_mac_info_t *);
97 static int ch_start(gld_mac_info_t *);
98 static int ch_stop(gld_mac_info_t *);
99 static int ch_set_mac_address(gld_mac_info_t *, uint8_t *);
100 static int ch_set_multicast(gld_mac_info_t *, uint8_t *, int);
101 static int ch_ioctl(gld_mac_info_t *, queue_t *, mblk_t *);
102 static int ch_set_promiscuous(gld_mac_info_t *, int);
103 static int ch_get_stats(gld_mac_info_t *, struct gld_stats *);
104 static int ch_send(gld_mac_info_t *, mblk_t *);
105 static uint_t ch_intr(gld_mac_info_t *);
106 
107 /*
108  * Data access requirements.
109  */
110 static struct ddi_device_acc_attr le_attr = {
111 	DDI_DEVICE_ATTR_V0,
112 	DDI_STRUCTURE_LE_ACC,
113 	DDI_STRICTORDER_ACC
114 };
115 
116 /*
117  * No swap mapping device attributes
118  */
119 static struct ddi_device_acc_attr null_attr = {
120 	DDI_DEVICE_ATTR_V0,
121 	DDI_NEVERSWAP_ACC,
122 	DDI_STRICTORDER_ACC
123 };
124 
125 /*
126  * STREAMS driver identification struture module_info(9s)
127  *
128  * driver limit values
129  */
130 
131 static	struct module_info ch_minfo = {
132 	CHIDNUM,	/* mi_idnum */
133 	CHNAME,		/* mi_idname */
134 	CHMINPSZ,	/* mi_minpsz */
135 	CHMAXPSZ,	/* mi_maxpsz */
136 	CHHIWAT,	/* mi_hiwat */
137 	CHLOWAT		/* mi_lowat */
138 };
139 
140 /*
141  * STREAMS queue processiong procedures qinit(9s)
142  *
143  * read queue procedures
144  */
145 
146 static struct qinit ch_rinit = {
147 	(int (*)()) NULL, 	/* qi_putp */
148 	gld_rsrv,		/* qi_srvp */
149 	gld_open,		/* qi_qopen */
150 	gld_close,		/* qi_qclose */
151 	(int (*)()) NULL, 	/* qi_qadmin */
152 	&ch_minfo,		/* qi_minfo */
153 	NULL			/* qi_mstat */
154 };
155 
156 /*
157  * STREAMS queue processiong procedures qinit(9s)
158  *
159  * write queue procedures
160  */
161 
162 static struct qinit ch_winit = {
163 	gld_wput,		/* qi_putp */
164 	gld_wsrv,		/* qi_srvp */
165 	(int (*)()) NULL, 	/* qi_qopen */
166 	(int (*)()) NULL, 	/* qi_qclose */
167 	(int (*)()) NULL, 	/* qi_qadmin */
168 	&ch_minfo,		/* qi_minfo */
169 	NULL			/* qi_mstat */
170 };
171 
172 /*
173  * STREAMS entity declaration structure - streamtab(9s)
174  */
175 static struct streamtab	chinfo = {
176 	&ch_rinit,	/* read queue information */
177 	&ch_winit,	/* write queue information */
178 	NULL,		/* st_muxrinit */
179 	NULL		/* st_muxwrinit */
180 };
181 
182 /*
183  * Device driver ops vector - cb_ops(9s)
184  *
185  * charater/block entry points structure.
186  * chinfo identifies driver as a STREAMS driver.
187  */
188 
189 static struct cb_ops cb_ch_ops = {
190 	nulldev,	/* cb_open */
191 	nulldev,	/* cb_close */
192 	nodev,		/* cb_strategy */
193 	nodev,		/* cb_print */
194 	nodev,		/* cb_dump */
195 	nodev,		/* cb_read */
196 	nodev,		/* cb_write */
197 	nodev,		/* cb_ioctl */
198 	nodev,		/* cb_devmap */
199 	nodev,		/* cb_mmap */
200 	nodev,		/* cb_segmap */
201 	nochpoll,	/* cb_chpoll */
202 	ddi_prop_op,	/* report driver property information - prop_op(9e) */
203 	&chinfo,	/* cb_stream */
204 #if defined(__sparc)
205 	D_MP | D_64BIT,
206 #else
207 	D_MP,		/* cb_flag (supports multi-threading) */
208 #endif
209 	CB_REV,		/* cb_rev */
210 	nodev,		/* cb_aread */
211 	nodev		/* cb_awrite */
212 };
213 
214 /*
215  * dev_ops(9S) structure
216  *
217  * Device Operations table, for autoconfiguration
218  */
219 
220 static	struct dev_ops ch_ops = {
221 	DEVO_REV,	/* Driver build version */
222 	0,		/* Initial driver reference count */
223 	gld_getinfo,	/* funcp: get driver information - getinfo(9e) */
224 	nulldev,	/* funcp: entry point obsolute - identify(9e) */
225 	nulldev,	/* funp: probe for device - probe(9e) */
226 	ch_attach,	/* funp: attach driver to dev_info - attach(9e) */
227 	ch_detach,	/* funp: detach driver to unload - detach(9e) */
228 	nodev,		/* funp: reset device (not supported) - dev_ops(9s) */
229 	&cb_ch_ops,	/* ptr to cb_ops structure */
230 	NULL,		/* ptr to nexus bus operations structure (leaf) */
231 	NULL,		/* funp: change device power level - power(9e) */
232 	ch_quiesce,	/* devo_quiesce */
233 };
234 
235 /*
236  * modldrv(9s) structure
237  *
238  * Definition for module specific device driver linkage structures (modctl.h)
239  */
240 
241 static struct modldrv modldrv = {
242 	&mod_driverops,		/* driver module */
243 	VERSION,
244 	&ch_ops,		/* driver ops */
245 };
246 
247 /*
248  * modlinkage(9s) structure
249  *
250  * module linkage base structure (modctl.h)
251  */
252 
253 static struct modlinkage modlinkage = {
254 	MODREV_1,		/* revision # of system */
255 	&modldrv,		/* NULL terminated list of linkage strucures */
256 	NULL
257 };
258 
259 /* ===================== start of STREAMS driver code ================== */
260 
261 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
262 /*
263  * global pointer to toe per-driver control structure.
264  */
265 #define	MAX_CARDS	4
266 ch_t *gchp[MAX_CARDS];
267 #endif
268 
269 kmutex_t in_use_l;
270 uint32_t buffers_in_use[SZ_INUSE];
271 uint32_t in_use_index;
272 
273 /*
274  * Ethernet broadcast address definition.
275  */
276 static struct ether_addr etherbroadcastaddr = {
277 	0xff, 0xff, 0xff, 0xff, 0xff, 0xff
278 };
279 
280 /*
281  * Module initialization functions.
282  *
283  *      Routine         Called by
284  *      _init(9E)       modload(9F)
285  *      _info(9E)       modinfo(9F)
286  *      _fini(9E)       modunload(9F)
287  */
288 
289 /*
290  * _init(9E):
291  *
292  * Initial, one-time, resource allocation and data initialization.
293  */
294 
295 int
296 _init(void)
297 {
298 	int status;
299 
300 	status = mod_install(&modlinkage);
301 
302 	mutex_init(&in_use_l, NULL, MUTEX_DRIVER, NULL);
303 
304 	return (status);
305 }
306 
307 /*
308  * _fini(9E): It is here that any device information that was allocated
309  * during the _init(9E) routine should be released and the module removed
310  * from the system.  In the case of per-instance information, that information
311  * should be released in the _detach(9E) routine.
312  */
313 
314 int
315 _fini(void)
316 {
317 	int status;
318 	int i;
319 	uint32_t t = 0;
320 
321 	for (i = 0; i < SZ_INUSE; i++)
322 		t += buffers_in_use[i];
323 
324 	if (t != 0)
325 		return (DDI_FAILURE);
326 
327 	status = mod_remove(&modlinkage);
328 
329 	if (status == DDI_SUCCESS)
330 		mutex_destroy(&in_use_l);
331 
332 	return (status);
333 }
334 
335 int
336 _info(struct modinfo *modinfop)
337 {
338 	int status;
339 
340 
341 	status = mod_info(&modlinkage, modinfop);
342 
343 	return (status);
344 }
345 
346 /*
347  * Attach(9E) - This is called on the open to the device.  It creates
348  * an instance of the driver.  In this routine we create the minor
349  * device node.  The routine also initializes all per-unit
350  * mutex's and conditional variables.
351  *
352  * If we were resuming a suspended instance of a device due to power
353  * management, then that would be handled here as well.  For more on
354  * that subject see the man page for pm(9E)
355  *
356  * Interface exists: make available by filling in network interface
357  * record.  System will initialize the interface when it is ready
358  * to accept packets.
359  */
360 int chdebug = 0;
361 int ch_abort_debug = 0;
362 
363 static int
364 ch_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
365 {
366 	ch_t *chp;
367 	int rv;
368 	int unit;
369 #ifdef CH_DEBUG
370 	int Version;
371 	int VendorID;
372 	int DeviceID;
373 	int SubDeviceID;
374 	int Command;
375 #endif
376 	gld_mac_info_t *macinfo;		/* GLD stuff follows */
377 	char *driver;
378 
379 	if (ch_abort_debug)
380 		debug_enter("ch_attach");
381 
382 	if (chdebug)
383 		return (DDI_FAILURE);
384 
385 
386 	if (cmd == DDI_ATTACH) {
387 
388 		unit = ddi_get_instance(dip);
389 
390 		driver = (char *)ddi_driver_name(dip);
391 
392 		PRINT(("driver %s unit: %d\n", driver, unit));
393 
394 		macinfo = gld_mac_alloc(dip);
395 		if (macinfo == NULL) {
396 			PRINT(("macinfo allocation failed\n"));
397 			DEBUG_ENTER("ch_attach");
398 			return (DDI_FAILURE);
399 		}
400 
401 		chp = (ch_t *)kmem_zalloc(sizeof (ch_t), KM_SLEEP);
402 
403 		if (chp == NULL) {
404 			PRINT(("zalloc of chp failed\n"));
405 			DEBUG_ENTER("ch_attach");
406 
407 			gld_mac_free(macinfo);
408 
409 			return (DDI_FAILURE);
410 		}
411 
412 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
413 		/* Solaris TOE support */
414 		gchp[unit] = chp;
415 #endif
416 
417 		PRINT(("attach macinfo: %p chp: %p\n", macinfo, chp));
418 
419 		chp->ch_dip  = dip;
420 		chp->ch_macp = macinfo;
421 		chp->ch_unit = unit;
422 		ch_set_name(chp, unit);
423 
424 		/*
425 		 * map in PCI register spaces
426 		 *
427 		 * PCI register set 0 - PCI configuration space
428 		 * PCI register set 1 - T101 card register space #1
429 		 */
430 
431 		/* map in T101 PCI configuration space */
432 		rv = pci_config_setup(
433 		    dip,		/* ptr to dev's dev_info struct */
434 		    &chp->ch_hpci);	/* ptr to data access handle */
435 
436 		if (rv != DDI_SUCCESS) {
437 			PRINT(("PCI config setup failed\n"));
438 			DEBUG_ENTER("ch_attach");
439 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
440 			gchp[unit] = NULL;
441 #endif
442 			cmn_err(CE_WARN, "%s: ddi_config_setup PCI error %d\n",
443 			    chp->ch_name, rv);
444 
445 			ch_free_name(chp);
446 			kmem_free(chp, sizeof (ch_t));
447 			gld_mac_free(macinfo);
448 
449 			return (DDI_FAILURE);
450 		}
451 
452 		ch_get_prop(chp);
453 
454 		macinfo->gldm_devinfo = dip;
455 		macinfo->gldm_private = (caddr_t)chp;
456 		macinfo->gldm_reset = ch_reset;
457 		macinfo->gldm_start = ch_start;
458 		macinfo->gldm_stop = ch_stop;
459 		macinfo->gldm_set_mac_addr = ch_set_mac_address;
460 		macinfo->gldm_send = ch_send;
461 		macinfo->gldm_set_promiscuous = ch_set_promiscuous;
462 		macinfo->gldm_get_stats = ch_get_stats;
463 		macinfo->gldm_ioctl = ch_ioctl;
464 		macinfo->gldm_set_multicast = ch_set_multicast;
465 		macinfo->gldm_intr = ch_intr;
466 		macinfo->gldm_mctl = NULL;
467 
468 		macinfo->gldm_ident = driver;
469 		macinfo->gldm_type = DL_ETHER;
470 		macinfo->gldm_minpkt = 0;
471 		macinfo->gldm_maxpkt = chp->ch_mtu;
472 		macinfo->gldm_addrlen = ETHERADDRL;
473 		macinfo->gldm_saplen = -2;
474 		macinfo->gldm_ppa = unit;
475 		macinfo->gldm_broadcast_addr =
476 		    etherbroadcastaddr.ether_addr_octet;
477 
478 
479 		/*
480 		 * do a power reset of card
481 		 *
482 		 * 1. set PwrState to D3hot (3)
483 		 * 2. clear PwrState flags
484 		 */
485 		pci_config_put32(chp->ch_hpci, 0x44, 3);
486 		pci_config_put32(chp->ch_hpci, 0x44, 0);
487 
488 		/* delay .5 sec */
489 		DELAY(500000);
490 
491 #ifdef CH_DEBUG
492 		VendorID    = pci_config_get16(chp->ch_hpci, 0);
493 		DeviceID    = pci_config_get16(chp->ch_hpci, 2);
494 		SubDeviceID = pci_config_get16(chp->ch_hpci, 0x2e);
495 		Command = pci_config_get16(chp->ch_hpci, 4);
496 
497 		PRINT(("IDs: %x,%x,%x\n", VendorID, DeviceID, SubDeviceID));
498 		PRINT(("Command: %x\n", Command));
499 #endif
500 		/* map in T101 register space (BAR0) */
501 		rv = ddi_regs_map_setup(
502 		    dip,		/* ptr to dev's dev_info struct */
503 		    BAR0,		/* register address space */
504 		    &chp->ch_bar0,	/* address of offset */
505 		    0,		/* offset into register address space */
506 		    0,		/* length mapped (everything) */
507 		    &le_attr,	/* ptr to device attr structure */
508 		    &chp->ch_hbar0);	/* ptr to data access handle */
509 
510 		if (rv != DDI_SUCCESS) {
511 			PRINT(("map registers failed\n"));
512 			DEBUG_ENTER("ch_attach");
513 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
514 			gchp[unit] = NULL;
515 #endif
516 			cmn_err(CE_WARN,
517 			    "%s: ddi_regs_map_setup BAR0 error %d\n",
518 			    chp->ch_name, rv);
519 
520 			pci_config_teardown(&chp->ch_hpci);
521 			ch_free_name(chp);
522 			kmem_free(chp, sizeof (ch_t));
523 			gld_mac_free(macinfo);
524 
525 			return (DDI_FAILURE);
526 		}
527 
528 #ifdef CH_DEBUG
529 		Version  = ddi_get32(chp->ch_hbar0,
530 		    (uint32_t *)(chp->ch_bar0+0x6c));
531 #endif
532 
533 		(void) ddi_dev_regsize(dip, 1, &chp->ch_bar0sz);
534 
535 		PRINT(("PCI BAR0 space addr: %p\n", chp->ch_bar0));
536 		PRINT(("PCI BAR0 space size: %x\n", chp->ch_bar0sz));
537 		PRINT(("PE Version: %x\n", Version));
538 
539 		/*
540 		 * Add interrupt to system.
541 		 */
542 		rv = ddi_get_iblock_cookie(
543 		    dip,		   /* ptr to dev's dev_info struct */
544 		    0,		   /* interrupt # (0) */
545 		    &chp->ch_icookp); /* ptr to interrupt block cookie */
546 
547 		if (rv != DDI_SUCCESS) {
548 			PRINT(("iblock cookie failed\n"));
549 			DEBUG_ENTER("ch_attach");
550 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
551 			gchp[unit] = NULL;
552 #endif
553 			cmn_err(CE_WARN,
554 			    "%s: ddi_get_iblock_cookie error %d\n",
555 			    chp->ch_name, rv);
556 
557 			ddi_regs_map_free(&chp->ch_hbar0);
558 			pci_config_teardown(&chp->ch_hpci);
559 			ch_free_name(chp);
560 			kmem_free(chp, sizeof (ch_t));
561 			gld_mac_free(macinfo);
562 
563 			return (DDI_FAILURE);
564 		}
565 
566 		/*
567 		 * add interrupt handler before card setup.
568 		 */
569 		rv = ddi_add_intr(
570 		    dip,		/* ptr to dev's dev_info struct */
571 		    0,		/* interrupt # (0) */
572 		    0,		/* iblock cookie ptr (NULL) */
573 		    0,		/* idevice cookie ptr (NULL) */
574 		    gld_intr,	/* function ptr to interrupt handler */
575 		    (caddr_t)macinfo);	/* handler argument */
576 
577 		if (rv != DDI_SUCCESS) {
578 			PRINT(("add_intr failed\n"));
579 			DEBUG_ENTER("ch_attach");
580 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
581 			gchp[unit] = NULL;
582 #endif
583 			cmn_err(CE_WARN, "%s: ddi_add_intr error %d\n",
584 			    chp->ch_name, rv);
585 
586 			ddi_regs_map_free(&chp->ch_hbar0);
587 			pci_config_teardown(&chp->ch_hpci);
588 			ch_free_name(chp);
589 			kmem_free(chp, sizeof (ch_t));
590 			gld_mac_free(macinfo);
591 
592 			return (DDI_FAILURE);
593 		}
594 
595 		/* initalize all the remaining per-card locks */
596 		mutex_init(&chp->ch_lock, NULL, MUTEX_DRIVER,
597 		    (void *)chp->ch_icookp);
598 		mutex_init(&chp->ch_intr, NULL, MUTEX_DRIVER,
599 		    (void *)chp->ch_icookp);
600 		mutex_init(&chp->ch_mc_lck, NULL, MUTEX_DRIVER, NULL);
601 		mutex_init(&chp->ch_dh_lck, NULL, MUTEX_DRIVER, NULL);
602 		mutex_init(&chp->mac_lock, NULL, MUTEX_DRIVER, NULL);
603 
604 		/* ------- initialize Chelsio card ------- */
605 
606 		if (pe_attach(chp)) {
607 			PRINT(("card initialization failed\n"));
608 			DEBUG_ENTER("ch_attach");
609 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
610 			gchp[unit] = NULL;
611 #endif
612 			cmn_err(CE_WARN, "%s: pe_attach failed\n",
613 			    chp->ch_name);
614 
615 			mutex_destroy(&chp->ch_lock);
616 			mutex_destroy(&chp->ch_intr);
617 			mutex_destroy(&chp->ch_mc_lck);
618 			mutex_destroy(&chp->ch_dh_lck);
619 			mutex_destroy(&chp->mac_lock);
620 			ddi_remove_intr(dip, 0, chp->ch_icookp);
621 			ddi_regs_map_free(&chp->ch_hbar0);
622 			pci_config_teardown(&chp->ch_hpci);
623 			ch_free_name(chp);
624 			kmem_free(chp, sizeof (ch_t));
625 			gld_mac_free(macinfo);
626 
627 			return (DDI_FAILURE);
628 		}
629 
630 		/* ------- done with Chelsio card ------- */
631 
632 		/* now can  set mac address */
633 		macinfo->gldm_vendor_addr = pe_get_mac(chp);
634 
635 		macinfo->gldm_cookie = chp->ch_icookp;
636 
637 		/*
638 		 * We only active checksum offload for T2 architectures.
639 		 */
640 		if (is_T2(chp)) {
641 			if (chp->ch_config.cksum_enabled)
642 				macinfo->gldm_capabilities |=
643 				    GLD_CAP_CKSUM_FULL_V4;
644 		} else
645 			chp->ch_config.cksum_enabled = 0;
646 
647 		rv = gld_register(
648 		    dip,		/* ptr to dev's dev_info struct */
649 		    (char *)ddi_driver_name(dip),	/* driver name */
650 		    macinfo);	/* ptr to gld macinfo buffer */
651 
652 		/*
653 		 * The Jumbo frames capability is not yet available
654 		 * in Solaris 10 so registration will fail. MTU > 1500 is
655 		 * supported in Update 1.
656 		 */
657 		if (rv != DDI_SUCCESS) {
658 			cmn_err(CE_NOTE, "MTU > 1500 not supported by GLD.\n");
659 			cmn_err(CE_NOTE, "Setting MTU to 1500. \n");
660 			macinfo->gldm_maxpkt = chp->ch_mtu = 1500;
661 			rv = gld_register(
662 			    dip,	/* ptr to dev's dev_info struct */
663 			    (char *)ddi_driver_name(dip), /* driver name */
664 			    macinfo); /* ptr to gld macinfo buffer */
665 		}
666 
667 
668 		if (rv != DDI_SUCCESS) {
669 			PRINT(("gld_register failed\n"));
670 			DEBUG_ENTER("ch_attach");
671 
672 			cmn_err(CE_WARN, "%s: gld_register error %d\n",
673 			    chp->ch_name, rv);
674 
675 			pe_detach(chp);
676 
677 			mutex_destroy(&chp->ch_lock);
678 			mutex_destroy(&chp->ch_intr);
679 			mutex_destroy(&chp->ch_mc_lck);
680 			mutex_destroy(&chp->ch_dh_lck);
681 			mutex_destroy(&chp->mac_lock);
682 			ddi_remove_intr(dip, 0, chp->ch_icookp);
683 			ddi_regs_map_free(&chp->ch_hbar0);
684 			pci_config_teardown(&chp->ch_hpci);
685 			ch_free_name(chp);
686 			kmem_free(chp, sizeof (ch_t));
687 			gld_mac_free(macinfo);
688 
689 			return (DDI_FAILURE);
690 		}
691 
692 		/*
693 		 * print a banner at boot time (verbose mode), announcing
694 		 * the device pointed to by dip
695 		 */
696 		ddi_report_dev(dip);
697 
698 		if (ch_abort_debug)
699 			debug_enter("ch_attach");
700 
701 		return (DDI_SUCCESS);
702 
703 	} else if (cmd == DDI_RESUME) {
704 		PRINT(("attach resume\n"));
705 		DEBUG_ENTER("ch_attach");
706 		if ((chp = (ch_t *)ddi_get_driver_private(dip)) == NULL)
707 			return (DDI_FAILURE);
708 
709 		mutex_enter(&chp->ch_lock);
710 		chp->ch_flags &= ~PESUSPENDED;
711 		mutex_exit(&chp->ch_lock);
712 		return (DDI_SUCCESS);
713 	} else {
714 		PRINT(("attach: bad command\n"));
715 		DEBUG_ENTER("ch_attach");
716 
717 		return (DDI_FAILURE);
718 	}
719 }
720 
721 /*
722  * quiesce(9E) entry point.
723  *
724  * This function is called when the system is single-threaded at high
725  * PIL with preemption disabled. Therefore, this function must not be
726  * blocked.
727  *
728  * This function returns DDI_SUCCESS on success, or DDI_FAILURE on failure.
729  * DDI_FAILURE indicates an error condition and should almost never happen.
730  */
731 static int
732 ch_quiesce(dev_info_t *dip)
733 {
734 	ch_t *chp;
735 	gld_mac_info_t *macinfo =
736 	    (gld_mac_info_t *)ddi_get_driver_private(dip);
737 
738 	chp = (ch_t *)macinfo->gldm_private;
739 	chdebug = 0;
740 	ch_abort_debug = 0;
741 
742 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
743 	gchp[chp->ch_unit] = NULL;
744 #endif
745 
746 	/* Set driver state for this card to IDLE */
747 	chp->ch_state = PEIDLE;
748 
749 	/*
750 	 * Do a power reset of card
751 	 * 1. set PwrState to D3hot (3)
752 	 * 2. clear PwrState flags
753 	 */
754 	pci_config_put32(chp->ch_hpci, 0x44, 3);
755 	pci_config_put32(chp->ch_hpci, 0x44, 0);
756 
757 	/* Wait 0.5 sec */
758 	drv_usecwait(500000);
759 
760 	/*
761 	 * Now stop the chip
762 	 */
763 	chp->ch_refcnt = 0;
764 	chp->ch_state = PESTOP;
765 
766 	/* Disables all interrupts */
767 	t1_interrupts_disable(chp);
768 
769 	/* Disables SGE queues */
770 	t1_write_reg_4(chp->sge->obj, A_SG_CONTROL, 0x0);
771 	t1_write_reg_4(chp->sge->obj, A_SG_INT_CAUSE, 0x0);
772 
773 	return (DDI_SUCCESS);
774 }
775 
776 static int
777 ch_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
778 {
779 	gld_mac_info_t *macinfo;
780 	ch_t *chp;
781 
782 	if (cmd == DDI_DETACH) {
783 		macinfo = (gld_mac_info_t *)ddi_get_driver_private(dip);
784 		chp = (ch_t *)macinfo->gldm_private;
785 
786 		/*
787 		 * fail detach if there are outstanding mblks still
788 		 * in use somewhere.
789 		 */
790 		DEBUG_ENTER("ch_detach");
791 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
792 		mutex_enter(&chp->ch_lock);
793 		if (chp->ch_refcnt > 0) {
794 			mutex_exit(&chp->ch_lock);
795 			return (DDI_FAILURE);
796 		}
797 		mutex_exit(&chp->ch_lock);
798 		gchp[chp->ch_unit] = NULL;
799 #endif
800 		/*
801 		 * set driver state for this card to IDLE. We're
802 		 * shutting down.
803 		 */
804 		mutex_enter(&chp->ch_lock);
805 		chp->ch_state = PEIDLE;
806 		mutex_exit(&chp->ch_lock);
807 
808 		/*
809 		 * do a power reset of card
810 		 *
811 		 * 1. set PwrState to D3hot (3)
812 		 * 2. clear PwrState flags
813 		 */
814 		pci_config_put32(chp->ch_hpci, 0x44, 3);
815 		pci_config_put32(chp->ch_hpci, 0x44, 0);
816 
817 		/* delay .5 sec */
818 		DELAY(500000);
819 
820 		/* free register resources */
821 		(void) gld_unregister(macinfo);
822 
823 		/* make sure no interrupts while shutting down card */
824 		ddi_remove_intr(dip, 0, chp->ch_icookp);
825 
826 		/*
827 		 * reset device and recover resources
828 		 */
829 		pe_detach(chp);
830 
831 		ddi_regs_map_free(&chp->ch_hbar0);
832 		pci_config_teardown(&chp->ch_hpci);
833 		mutex_destroy(&chp->ch_lock);
834 		mutex_destroy(&chp->ch_intr);
835 		mutex_destroy(&chp->ch_mc_lck);
836 		mutex_destroy(&chp->ch_dh_lck);
837 		mutex_destroy(&chp->mac_lock);
838 		ch_free_dma_handles(chp);
839 #if defined(__sparc)
840 		ch_free_dvma_handles(chp);
841 #endif
842 		ch_free_name(chp);
843 		kmem_free(chp, sizeof (ch_t));
844 		gld_mac_free(macinfo);
845 
846 		DEBUG_ENTER("ch_detach end");
847 
848 		return (DDI_SUCCESS);
849 
850 	} else if ((cmd == DDI_SUSPEND) || (cmd == DDI_PM_SUSPEND)) {
851 		DEBUG_ENTER("suspend");
852 		if ((chp = (ch_t *)ddi_get_driver_private(dip)) == NULL)
853 			return (DDI_FAILURE);
854 		mutex_enter(&chp->ch_lock);
855 		chp->ch_flags |= PESUSPENDED;
856 		mutex_exit(&chp->ch_lock);
857 #ifdef TODO
858 		/* Un-initialize (STOP) T101 */
859 #endif
860 		return (DDI_SUCCESS);
861 	} else
862 		return (DDI_FAILURE);
863 }
864 
865 /*
866  * ch_alloc_dma_mem
867  *
868  * allocates DMA handle
869  * allocates kernel memory
870  * allocates DMA access handle
871  *
872  * chp - per-board descriptor
873  * type - byteswap mapping?
874  * flags - type of mapping
875  * size - # bytes mapped
876  * paddr - physical address
877  * dh - ddi dma handle
878  * ah - ddi access handle
879  */
880 
881 void *
882 ch_alloc_dma_mem(ch_t *chp, int type, int flags, int size, uint64_t *paddr,
883 	ulong_t *dh, ulong_t *ah)
884 {
885 	ddi_dma_attr_t ch_dma_attr;
886 	ddi_dma_cookie_t cookie;
887 	ddi_dma_handle_t ch_dh;
888 	ddi_acc_handle_t ch_ah;
889 	ddi_device_acc_attr_t *dev_attrp;
890 	caddr_t ch_vaddr;
891 	size_t rlen;
892 	uint_t count;
893 	uint_t mapping;
894 	uint_t align;
895 	uint_t rv;
896 	uint_t direction;
897 
898 	mapping = (flags&DMA_STREAM)?DDI_DMA_STREAMING:DDI_DMA_CONSISTENT;
899 	if (flags & DMA_4KALN)
900 		align = 0x4000;
901 	else if (flags & DMA_SMALN)
902 		align = chp->ch_sm_buf_aln;
903 	else if (flags & DMA_BGALN)
904 		align = chp->ch_bg_buf_aln;
905 	else {
906 		cmn_err(CE_WARN, "ch_alloc_dma_mem(%s): bad alignment flag\n",
907 		    chp->ch_name);
908 		return (0);
909 	}
910 	direction = (flags&DMA_OUT)?DDI_DMA_WRITE:DDI_DMA_READ;
911 
912 	/*
913 	 * dynamically create a dma attribute structure
914 	 */
915 	ch_dma_attr.dma_attr_version = DMA_ATTR_V0;
916 	ch_dma_attr.dma_attr_addr_lo = 0;
917 	ch_dma_attr.dma_attr_addr_hi = 0xffffffffffffffff;
918 	ch_dma_attr.dma_attr_count_max = 0x00ffffff;
919 	ch_dma_attr.dma_attr_align = align;
920 	ch_dma_attr.dma_attr_burstsizes = 0xfff;
921 	ch_dma_attr.dma_attr_minxfer = 1;
922 	ch_dma_attr.dma_attr_maxxfer = 0x00ffffff;
923 	ch_dma_attr.dma_attr_seg = 0xffffffff;
924 	ch_dma_attr.dma_attr_sgllen = 1;
925 	ch_dma_attr.dma_attr_granular = 1;
926 	ch_dma_attr.dma_attr_flags = 0;
927 
928 	rv = ddi_dma_alloc_handle(
929 	    chp->ch_dip,		/* device dev_info structure */
930 	    &ch_dma_attr,		/* DMA attributes */
931 	    DDI_DMA_SLEEP,		/* Wait if no memory */
932 	    NULL,			/* no argument to callback */
933 	    &ch_dh);			/* DMA handle */
934 	if (rv != DDI_SUCCESS) {
935 
936 		cmn_err(CE_WARN,
937 		    "%s: ch_alloc_dma_mem: ddi_dma_alloc_handle error %d\n",
938 		    chp->ch_name, rv);
939 
940 		return (0);
941 	}
942 
943 	/* set byte order for data xfer */
944 	if (type)
945 		dev_attrp = &null_attr;
946 	else
947 		dev_attrp = &le_attr;
948 
949 	rv = ddi_dma_mem_alloc(
950 	    ch_dh,		/* dma handle */
951 	    size,		/* size desired allocate */
952 	    dev_attrp,		/* access attributes */
953 	    mapping,
954 	    DDI_DMA_SLEEP,	/* wait for resources */
955 	    NULL,		/* no argument */
956 	    &ch_vaddr,		/* allocated memory */
957 	    &rlen,		/* real size allocated */
958 	    &ch_ah);		/* data access handle */
959 	if (rv != DDI_SUCCESS) {
960 		ddi_dma_free_handle(&ch_dh);
961 
962 		cmn_err(CE_WARN,
963 		    "%s: ch_alloc_dma_mem: ddi_dma_mem_alloc error %d\n",
964 		    chp->ch_name, rv);
965 
966 		return (0);
967 	}
968 
969 	rv = ddi_dma_addr_bind_handle(
970 	    ch_dh,				/* dma handle */
971 	    (struct as *)0,			/* kernel address space */
972 	    ch_vaddr,				/* virtual address */
973 	    rlen,				/* length of object */
974 	    direction|mapping,
975 	    DDI_DMA_SLEEP,			/* Wait for resources */
976 	    NULL,				/* no argument */
977 	    &cookie,				/* dma cookie */
978 	    &count);
979 	if (rv != DDI_DMA_MAPPED) {
980 		ddi_dma_mem_free(&ch_ah);
981 		ddi_dma_free_handle(&ch_dh);
982 
983 		cmn_err(CE_WARN,
984 		    "%s: ch_alloc_dma_mem: ddi_dma_addr_bind_handle error %d\n",
985 		    chp->ch_name, rv);
986 
987 		return (0);
988 	}
989 
990 	if (count != 1) {
991 		cmn_err(CE_WARN,
992 		    "%s: ch_alloc_dma_mem: ch_alloc_dma_mem cookie count %d\n",
993 		    chp->ch_name, count);
994 		PRINT(("ch_alloc_dma_mem cookie count %d\n", count));
995 
996 		ddi_dma_mem_free(&ch_ah);
997 		ddi_dma_free_handle(&ch_dh);
998 
999 		return (0);
1000 	}
1001 
1002 	*paddr = cookie.dmac_laddress;
1003 
1004 	*(ddi_dma_handle_t *)dh = ch_dh;
1005 	*(ddi_acc_handle_t *)ah = ch_ah;
1006 
1007 	return ((void *)ch_vaddr);
1008 }
1009 
1010 /*
1011  * ch_free_dma_mem
1012  *
1013  * frees resources allocated by ch_alloc_dma_mem()
1014  *
1015  * frees DMA handle
1016  * frees kernel memory
1017  * frees DMA access handle
1018  */
1019 
1020 void
1021 ch_free_dma_mem(ulong_t dh, ulong_t ah)
1022 {
1023 	ddi_dma_handle_t ch_dh = (ddi_dma_handle_t)dh;
1024 	ddi_acc_handle_t ch_ah = (ddi_acc_handle_t)ah;
1025 
1026 	(void) ddi_dma_unbind_handle(ch_dh);
1027 	ddi_dma_mem_free(&ch_ah);
1028 	ddi_dma_free_handle(&ch_dh);
1029 }
1030 
1031 /*
1032  * create a dma handle and return a dma handle entry.
1033  */
1034 free_dh_t *
1035 ch_get_dma_handle(ch_t *chp)
1036 {
1037 	ddi_dma_handle_t ch_dh;
1038 	ddi_dma_attr_t ch_dma_attr;
1039 	free_dh_t *dhe;
1040 	int rv;
1041 
1042 	dhe = (free_dh_t *)kmem_zalloc(sizeof (*dhe), KM_SLEEP);
1043 
1044 	ch_dma_attr.dma_attr_version = DMA_ATTR_V0;
1045 	ch_dma_attr.dma_attr_addr_lo = 0;
1046 	ch_dma_attr.dma_attr_addr_hi = 0xffffffffffffffff;
1047 	ch_dma_attr.dma_attr_count_max = 0x00ffffff;
1048 	ch_dma_attr.dma_attr_align = 1;
1049 	ch_dma_attr.dma_attr_burstsizes = 0xfff;
1050 	ch_dma_attr.dma_attr_minxfer = 1;
1051 	ch_dma_attr.dma_attr_maxxfer = 0x00ffffff;
1052 	ch_dma_attr.dma_attr_seg = 0xffffffff;
1053 	ch_dma_attr.dma_attr_sgllen = 5;
1054 	ch_dma_attr.dma_attr_granular = 1;
1055 	ch_dma_attr.dma_attr_flags = 0;
1056 
1057 	rv = ddi_dma_alloc_handle(
1058 	    chp->ch_dip,		/* device dev_info */
1059 	    &ch_dma_attr,		/* DMA attributes */
1060 	    DDI_DMA_SLEEP,		/* Wait if no memory */
1061 	    NULL,			/* no argument */
1062 	    &ch_dh);			/* DMA handle */
1063 	if (rv != DDI_SUCCESS) {
1064 
1065 		cmn_err(CE_WARN,
1066 		    "%s: ch_get_dma_handle: ddi_dma_alloc_handle error %d\n",
1067 		    chp->ch_name, rv);
1068 
1069 		kmem_free(dhe, sizeof (*dhe));
1070 
1071 		return ((free_dh_t *)0);
1072 	}
1073 
1074 	dhe->dhe_dh = (ulong_t)ch_dh;
1075 
1076 	return (dhe);
1077 }
1078 
1079 /*
1080  * free the linked list of dma descriptor entries.
1081  */
1082 static void
1083 ch_free_dma_handles(ch_t *chp)
1084 {
1085 	free_dh_t *dhe, *the;
1086 
1087 	dhe = chp->ch_dh;
1088 	while (dhe) {
1089 		ddi_dma_free_handle((ddi_dma_handle_t *)&dhe->dhe_dh);
1090 		the = dhe;
1091 		dhe = dhe->dhe_next;
1092 		kmem_free(the, sizeof (*the));
1093 	}
1094 	chp->ch_dh = NULL;
1095 }
1096 
1097 /*
1098  * ch_bind_dma_handle()
1099  *
1100  * returns # of entries used off of cmdQ_ce_t array to hold physical addrs.
1101  *
1102  * chp - per-board descriptor
1103  * size - # bytes mapped
1104  * vaddr - virtual address
1105  * cmp - array of cmdQ_ce_t entries
1106  * cnt - # free entries in cmp array
1107  */
1108 
1109 uint32_t
1110 ch_bind_dma_handle(ch_t *chp, int size, caddr_t vaddr, cmdQ_ce_t *cmp,
1111 	uint32_t cnt)
1112 {
1113 	ddi_dma_cookie_t cookie;
1114 	ddi_dma_handle_t ch_dh;
1115 	uint_t count;
1116 	uint32_t n = 1;
1117 	free_dh_t *dhe;
1118 	uint_t rv;
1119 
1120 	mutex_enter(&chp->ch_dh_lck);
1121 	if ((dhe = chp->ch_dh) != NULL) {
1122 		chp->ch_dh = dhe->dhe_next;
1123 	}
1124 	mutex_exit(&chp->ch_dh_lck);
1125 
1126 	if (dhe == NULL) {
1127 		return (0);
1128 	}
1129 
1130 	ch_dh = (ddi_dma_handle_t)dhe->dhe_dh;
1131 
1132 	rv = ddi_dma_addr_bind_handle(
1133 	    ch_dh,		/* dma handle */
1134 	    (struct as *)0,	/* kernel address space */
1135 	    vaddr,		/* virtual address */
1136 	    size,		/* length of object */
1137 	    DDI_DMA_WRITE|DDI_DMA_STREAMING,
1138 	    DDI_DMA_SLEEP,	/* Wait for resources */
1139 	    NULL,		/* no argument */
1140 	    &cookie,	/* dma cookie */
1141 	    &count);
1142 	if (rv != DDI_DMA_MAPPED) {
1143 
1144 		/* return dma header descriptor back to free list */
1145 		mutex_enter(&chp->ch_dh_lck);
1146 		dhe->dhe_next = chp->ch_dh;
1147 		chp->ch_dh = dhe;
1148 		mutex_exit(&chp->ch_dh_lck);
1149 
1150 		cmn_err(CE_WARN,
1151 		    "%s: ch_bind_dma_handle: ddi_dma_addr_bind_handle err %d\n",
1152 		    chp->ch_name, rv);
1153 
1154 		return (0);
1155 	}
1156 
1157 	/*
1158 	 * abort if we've run out of space
1159 	 */
1160 	if (count > cnt) {
1161 		/* return dma header descriptor back to free list */
1162 		mutex_enter(&chp->ch_dh_lck);
1163 		dhe->dhe_next = chp->ch_dh;
1164 		chp->ch_dh = dhe;
1165 		mutex_exit(&chp->ch_dh_lck);
1166 
1167 		return (0);
1168 	}
1169 
1170 	cmp->ce_pa = cookie.dmac_laddress;
1171 	cmp->ce_dh = NULL;
1172 	cmp->ce_len = cookie.dmac_size;
1173 	cmp->ce_mp = NULL;
1174 	cmp->ce_flg = DH_DMA;
1175 
1176 	while (--count) {
1177 		cmp++;
1178 		n++;
1179 		ddi_dma_nextcookie(ch_dh, &cookie);
1180 		cmp->ce_pa = cookie.dmac_laddress;
1181 		cmp->ce_dh = NULL;
1182 		cmp->ce_len = cookie.dmac_size;
1183 		cmp->ce_mp = NULL;
1184 		cmp->ce_flg = DH_DMA;
1185 	}
1186 
1187 	cmp->ce_dh = dhe;
1188 
1189 	return (n);
1190 }
1191 
1192 /*
1193  * ch_unbind_dma_handle()
1194  *
1195  * frees resources alloacted by ch_bind_dma_handle().
1196  *
1197  * frees DMA handle
1198  */
1199 
1200 void
1201 ch_unbind_dma_handle(ch_t *chp, free_dh_t *dhe)
1202 {
1203 	ddi_dma_handle_t ch_dh = (ddi_dma_handle_t)dhe->dhe_dh;
1204 
1205 	if (ddi_dma_unbind_handle(ch_dh))
1206 		cmn_err(CE_WARN, "%s: ddi_dma_unbind_handle failed",
1207 		    chp->ch_name);
1208 
1209 	mutex_enter(&chp->ch_dh_lck);
1210 	dhe->dhe_next = chp->ch_dh;
1211 	chp->ch_dh = dhe;
1212 	mutex_exit(&chp->ch_dh_lck);
1213 }
1214 
1215 #if defined(__sparc)
1216 /*
1217  * DVMA stuff. Solaris only.
1218  */
1219 
1220 /*
1221  * create a dvma handle and return a dma handle entry.
1222  * DVMA is on sparc only!
1223  */
1224 
1225 free_dh_t *
1226 ch_get_dvma_handle(ch_t *chp)
1227 {
1228 	ddi_dma_handle_t ch_dh;
1229 	ddi_dma_lim_t ch_dvma_attr;
1230 	free_dh_t *dhe;
1231 	int rv;
1232 
1233 	dhe = (free_dh_t *)kmem_zalloc(sizeof (*dhe), KM_SLEEP);
1234 
1235 	ch_dvma_attr.dlim_addr_lo = 0;
1236 	ch_dvma_attr.dlim_addr_hi = 0xffffffff;
1237 	ch_dvma_attr.dlim_cntr_max = 0xffffffff;
1238 	ch_dvma_attr.dlim_burstsizes = 0xfff;
1239 	ch_dvma_attr.dlim_minxfer = 1;
1240 	ch_dvma_attr.dlim_dmaspeed = 0;
1241 
1242 	rv = dvma_reserve(
1243 	    chp->ch_dip,		/* device dev_info */
1244 	    &ch_dvma_attr,		/* DVMA attributes */
1245 	    3,			/* number of pages */
1246 	    &ch_dh);		/* DVMA handle */
1247 
1248 	if (rv != DDI_SUCCESS) {
1249 
1250 		cmn_err(CE_WARN,
1251 		    "%s: ch_get_dvma_handle: dvma_reserve() error %d\n",
1252 		    chp->ch_name, rv);
1253 
1254 		kmem_free(dhe, sizeof (*dhe));
1255 
1256 		return ((free_dh_t *)0);
1257 	}
1258 
1259 	dhe->dhe_dh = (ulong_t)ch_dh;
1260 
1261 	return (dhe);
1262 }
1263 
1264 /*
1265  * free the linked list of dvma descriptor entries.
1266  * DVMA is only on sparc!
1267  */
1268 
1269 static void
1270 ch_free_dvma_handles(ch_t *chp)
1271 {
1272 	free_dh_t *dhe, *the;
1273 
1274 	dhe = chp->ch_vdh;
1275 	while (dhe) {
1276 		dvma_release((ddi_dma_handle_t)dhe->dhe_dh);
1277 		the = dhe;
1278 		dhe = dhe->dhe_next;
1279 		kmem_free(the, sizeof (*the));
1280 	}
1281 	chp->ch_vdh = NULL;
1282 }
1283 
1284 /*
1285  * ch_bind_dvma_handle()
1286  *
1287  * returns # of entries used off of cmdQ_ce_t array to hold physical addrs.
1288  * DVMA in sparc only
1289  *
1290  * chp - per-board descriptor
1291  * size - # bytes mapped
1292  * vaddr - virtual address
1293  * cmp - array of cmdQ_ce_t entries
1294  * cnt - # free entries in cmp array
1295  */
1296 
1297 uint32_t
1298 ch_bind_dvma_handle(ch_t *chp, int size, caddr_t vaddr, cmdQ_ce_t *cmp,
1299 	uint32_t cnt)
1300 {
1301 	ddi_dma_cookie_t cookie;
1302 	ddi_dma_handle_t ch_dh;
1303 	uint32_t n = 1;
1304 	free_dh_t *dhe;
1305 
1306 	mutex_enter(&chp->ch_dh_lck);
1307 	if ((dhe = chp->ch_vdh) != NULL) {
1308 		chp->ch_vdh = dhe->dhe_next;
1309 	}
1310 	mutex_exit(&chp->ch_dh_lck);
1311 
1312 	if (dhe == NULL) {
1313 		return (0);
1314 	}
1315 
1316 	ch_dh = (ddi_dma_handle_t)dhe->dhe_dh;
1317 	n = cnt;
1318 
1319 	dvma_kaddr_load(
1320 	    ch_dh,		/* dvma handle */
1321 	    vaddr,		/* virtual address */
1322 	    size,		/* length of object */
1323 	    0,		/* start at index 0 */
1324 	    &cookie);
1325 
1326 	dvma_sync(ch_dh, 0, DDI_DMA_SYNC_FORDEV);
1327 
1328 	cookie.dmac_notused = 0;
1329 	n = 1;
1330 
1331 	cmp->ce_pa = cookie.dmac_laddress;
1332 	cmp->ce_dh = dhe;
1333 	cmp->ce_len = cookie.dmac_size;
1334 	cmp->ce_mp = NULL;
1335 	cmp->ce_flg = DH_DVMA;	/* indicate a dvma descriptor */
1336 
1337 	return (n);
1338 }
1339 
1340 /*
1341  * ch_unbind_dvma_handle()
1342  *
1343  * frees resources alloacted by ch_bind_dvma_handle().
1344  *
1345  * frees DMA handle
1346  */
1347 
1348 void
1349 ch_unbind_dvma_handle(ch_t *chp, free_dh_t *dhe)
1350 {
1351 	ddi_dma_handle_t ch_dh = (ddi_dma_handle_t)dhe->dhe_dh;
1352 
1353 	dvma_unload(ch_dh, 0, -1);
1354 
1355 	mutex_enter(&chp->ch_dh_lck);
1356 	dhe->dhe_next = chp->ch_vdh;
1357 	chp->ch_vdh = dhe;
1358 	mutex_exit(&chp->ch_dh_lck);
1359 }
1360 
1361 #endif	/* defined(__sparc) */
1362 
1363 /*
1364  * send received packet up stream.
1365  *
1366  * if driver has been stopped, then we drop the message.
1367  */
1368 void
1369 ch_send_up(ch_t *chp, mblk_t *mp, uint32_t cksum, int flg)
1370 {
1371 	/*
1372 	 * probably do not need a lock here. When we set PESTOP in
1373 	 * ch_stop() a packet could have just passed here and gone
1374 	 * upstream. The next one will be dropped.
1375 	 */
1376 	if (chp->ch_state == PERUNNING) {
1377 		/*
1378 		 * note that flg will not be set unless enable_checksum_offload
1379 		 * set in /etc/system (see sge.c).
1380 		 */
1381 		if (flg)
1382 			mac_hcksum_set(mp, 0, 0, 0, cksum, HCK_FULLCKSUM);
1383 		gld_recv(chp->ch_macp, mp);
1384 	} else {
1385 		freemsg(mp);
1386 	}
1387 }
1388 
1389 /*
1390  * unblock gld driver.
1391  */
1392 void
1393 ch_gld_ok(ch_t *chp)
1394 {
1395 	gld_sched(chp->ch_macp);
1396 }
1397 
1398 
1399 /*
1400  * reset the card.
1401  *
1402  * Note: we only do this after the card has been initialized.
1403  */
1404 static int
1405 ch_reset(gld_mac_info_t *mp)
1406 {
1407 	ch_t *chp;
1408 
1409 	if (mp == NULL) {
1410 		return (GLD_FAILURE);
1411 	}
1412 
1413 	chp = (ch_t *)mp->gldm_private;
1414 
1415 	if (chp == NULL) {
1416 		return (GLD_FAILURE);
1417 	}
1418 
1419 #ifdef NOTYET
1420 	/*
1421 	 * do a reset of card
1422 	 *
1423 	 * 1. set PwrState to D3hot (3)
1424 	 * 2. clear PwrState flags
1425 	 */
1426 	/*
1427 	 * When we did this, the card didn't start. First guess is that
1428 	 * the initialization is not quite correct. For now, we don't
1429 	 * reset things.
1430 	 */
1431 	if (chp->ch_hpci) {
1432 		pci_config_put32(chp->ch_hpci, 0x44, 3);
1433 		pci_config_put32(chp->ch_hpci, 0x44, 0);
1434 
1435 		/* delay .5 sec */
1436 		DELAY(500000);
1437 	}
1438 #endif
1439 
1440 	return (GLD_SUCCESS);
1441 }
1442 
1443 static int
1444 ch_start(gld_mac_info_t *macinfo)
1445 {
1446 	ch_t *chp = (ch_t *)macinfo->gldm_private;
1447 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
1448 	/* only initialize card on first attempt */
1449 	mutex_enter(&chp->ch_lock);
1450 	chp->ch_refcnt++;
1451 	if (chp->ch_refcnt == 1) {
1452 		chp->ch_state = PERUNNING;
1453 		mutex_exit(&chp->ch_lock);
1454 		pe_init((void *)chp);
1455 	} else
1456 		mutex_exit(&chp->ch_lock);
1457 #else
1458 	pe_init((void *)chp);
1459 
1460 	/* go to running state, we're being started */
1461 	mutex_enter(&chp->ch_lock);
1462 	chp->ch_state = PERUNNING;
1463 	mutex_exit(&chp->ch_lock);
1464 #endif
1465 
1466 	return (GLD_SUCCESS);
1467 }
1468 
1469 static int
1470 ch_stop(gld_mac_info_t *mp)
1471 {
1472 	ch_t *chp = (ch_t *)mp->gldm_private;
1473 
1474 	/*
1475 	 * can only stop the chip if it's been initialized
1476 	 */
1477 	mutex_enter(&chp->ch_lock);
1478 	if (chp->ch_state == PEIDLE) {
1479 		mutex_exit(&chp->ch_lock);
1480 		return (GLD_FAILURE);
1481 	}
1482 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
1483 	chp->ch_refcnt--;
1484 	if (chp->ch_refcnt == 0) {
1485 		chp->ch_state = PESTOP;
1486 		mutex_exit(&chp->ch_lock);
1487 		pe_stop(chp);
1488 	} else
1489 		mutex_exit(&chp->ch_lock);
1490 #else
1491 	chp->ch_state = PESTOP;
1492 	mutex_exit(&chp->ch_lock);
1493 	pe_stop(chp);
1494 #endif
1495 	return (GLD_SUCCESS);
1496 }
1497 
1498 static int
1499 ch_set_mac_address(gld_mac_info_t *mp, uint8_t *mac)
1500 {
1501 	ch_t *chp;
1502 
1503 	if (mp) {
1504 		chp = (ch_t *)mp->gldm_private;
1505 	} else {
1506 		return (GLD_FAILURE);
1507 	}
1508 
1509 	pe_set_mac(chp, mac);
1510 
1511 	return (GLD_SUCCESS);
1512 }
1513 
1514 static int
1515 ch_set_multicast(gld_mac_info_t *mp, uint8_t *ep, int flg)
1516 {
1517 	ch_t *chp = (ch_t *)mp->gldm_private;
1518 
1519 	return (pe_set_mc(chp, ep, flg));
1520 }
1521 
1522 static int
1523 ch_ioctl(gld_mac_info_t *macinfo, queue_t *q, mblk_t *mp)
1524 {
1525 	struct iocblk *iocp;
1526 
1527 	switch (mp->b_datap->db_type) {
1528 	case M_IOCTL:
1529 		/* pe_ioctl() does qreply() */
1530 		pe_ioctl((ch_t *)(macinfo->gldm_private), q, mp);
1531 		break;
1532 
1533 	default:
1534 /*
1535  *		cmn_err(CE_NOTE, "ch_ioctl not M_IOCTL\n");
1536  *		debug_enter("bad ch_ioctl");
1537  */
1538 
1539 		iocp = (struct iocblk *)mp->b_rptr;
1540 
1541 		if (mp->b_cont)
1542 			freemsg(mp->b_cont);
1543 		mp->b_cont = NULL;
1544 
1545 		mp->b_datap->db_type = M_IOCNAK;
1546 		iocp->ioc_error = EINVAL;
1547 		qreply(q, mp);
1548 		break;
1549 	}
1550 
1551 	return (GLD_SUCCESS);
1552 }
1553 
1554 static int
1555 ch_set_promiscuous(gld_mac_info_t *mp, int flag)
1556 {
1557 	ch_t *chp = (ch_t *)mp->gldm_private;
1558 
1559 	switch (flag) {
1560 	case GLD_MAC_PROMISC_MULTI:
1561 		pe_set_promiscuous(chp, 2);
1562 		break;
1563 
1564 	case GLD_MAC_PROMISC_NONE:
1565 		pe_set_promiscuous(chp, 0);
1566 		break;
1567 
1568 	case GLD_MAC_PROMISC_PHYS:
1569 	default:
1570 		pe_set_promiscuous(chp, 1);
1571 		break;
1572 	}
1573 
1574 	return (GLD_SUCCESS);
1575 }
1576 
1577 static int
1578 ch_get_stats(gld_mac_info_t *mp, struct gld_stats *gs)
1579 {
1580 	ch_t *chp = (ch_t *)mp->gldm_private;
1581 	uint64_t speed;
1582 	uint32_t intrcnt;
1583 	uint32_t norcvbuf;
1584 	uint32_t oerrors;
1585 	uint32_t ierrors;
1586 	uint32_t underrun;
1587 	uint32_t overrun;
1588 	uint32_t framing;
1589 	uint32_t crc;
1590 	uint32_t carrier;
1591 	uint32_t collisions;
1592 	uint32_t xcollisions;
1593 	uint32_t late;
1594 	uint32_t defer;
1595 	uint32_t xerrs;
1596 	uint32_t rerrs;
1597 	uint32_t toolong;
1598 	uint32_t runt;
1599 	ulong_t multixmt;
1600 	ulong_t multircv;
1601 	ulong_t brdcstxmt;
1602 	ulong_t brdcstrcv;
1603 
1604 	/*
1605 	 * race looks benign here.
1606 	 */
1607 	if (chp->ch_state != PERUNNING) {
1608 		return (GLD_FAILURE);
1609 	}
1610 
1611 	(void) pe_get_stats(chp,
1612 	    &speed,
1613 	    &intrcnt,
1614 	    &norcvbuf,
1615 	    &oerrors,
1616 	    &ierrors,
1617 	    &underrun,
1618 	    &overrun,
1619 	    &framing,
1620 	    &crc,
1621 	    &carrier,
1622 	    &collisions,
1623 	    &xcollisions,
1624 	    &late,
1625 	    &defer,
1626 	    &xerrs,
1627 	    &rerrs,
1628 	    &toolong,
1629 	    &runt,
1630 	    &multixmt,
1631 	    &multircv,
1632 	    &brdcstxmt,
1633 	    &brdcstrcv);
1634 
1635 	gs->glds_speed = speed;
1636 	gs->glds_media = GLDM_UNKNOWN;
1637 	gs->glds_intr  = intrcnt;
1638 	gs->glds_norcvbuf = norcvbuf;
1639 	gs->glds_errxmt = oerrors;
1640 	gs->glds_errrcv = ierrors;
1641 	gs->glds_missed = ierrors;	/* ??? */
1642 	gs->glds_underflow = underrun;
1643 	gs->glds_overflow = overrun;
1644 	gs->glds_frame = framing;
1645 	gs->glds_crc = crc;
1646 	gs->glds_duplex = GLD_DUPLEX_FULL;
1647 	gs->glds_nocarrier = carrier;
1648 	gs->glds_collisions = collisions;
1649 	gs->glds_excoll = xcollisions;
1650 	gs->glds_xmtlatecoll = late;
1651 	gs->glds_defer = defer;
1652 	gs->glds_dot3_first_coll = 0;	/* Not available */
1653 	gs->glds_dot3_multi_coll = 0;	/* Not available */
1654 	gs->glds_dot3_sqe_error = 0;	/* Not available */
1655 	gs->glds_dot3_mac_xmt_error = xerrs;
1656 	gs->glds_dot3_mac_rcv_error = rerrs;
1657 	gs->glds_dot3_frame_too_long = toolong;
1658 	gs->glds_short = runt;
1659 
1660 	gs->glds_noxmtbuf = 0;		/* not documented */
1661 	gs->glds_xmtretry = 0;		/* not documented */
1662 	gs->glds_multixmt = multixmt;	/* not documented */
1663 	gs->glds_multircv = multircv;	/* not documented */
1664 	gs->glds_brdcstxmt = brdcstxmt;	/* not documented */
1665 	gs->glds_brdcstrcv = brdcstrcv;	/* not documented */
1666 
1667 	return (GLD_SUCCESS);
1668 }
1669 
1670 
1671 static int
1672 ch_send(gld_mac_info_t *macinfo, mblk_t *mp)
1673 {
1674 	ch_t *chp = (ch_t *)macinfo->gldm_private;
1675 	uint32_t flg;
1676 	uint32_t msg_flg;
1677 
1678 #ifdef TX_CKSUM_FIX
1679 	mblk_t *nmp;
1680 	int frags;
1681 	size_t msg_len;
1682 	struct ether_header *ehdr;
1683 	ipha_t *ihdr;
1684 	int tflg = 0;
1685 #endif	/* TX_CKSUM_FIX */
1686 
1687 	/*
1688 	 * race looks benign here.
1689 	 */
1690 	if (chp->ch_state != PERUNNING) {
1691 		return (GLD_FAILURE);
1692 	}
1693 
1694 	msg_flg = 0;
1695 	if (chp->ch_config.cksum_enabled) {
1696 		if (is_T2(chp)) {
1697 			mac_hcksum_get(mp, NULL, NULL, NULL, NULL, &msg_flg);
1698 			flg = (msg_flg & HCK_FULLCKSUM)?
1699 			    CH_NO_CPL: CH_NO_HWCKSUM|CH_NO_CPL;
1700 		} else
1701 			flg = CH_NO_CPL;
1702 	} else
1703 	flg = CH_NO_HWCKSUM | CH_NO_CPL;
1704 
1705 #ifdef TX_CKSUM_FIX
1706 	/*
1707 	 * Check if the message spans more than one mblk or
1708 	 * if it does and the ip header is not in the first
1709 	 * fragment then pull up the message. This case is
1710 	 * expected to be rare.
1711 	 */
1712 	frags = 0;
1713 	msg_len = 0;
1714 	nmp = mp;
1715 	do {
1716 		frags++;
1717 		msg_len += MBLKL(nmp);
1718 		nmp = nmp->b_cont;
1719 	} while (nmp);
1720 #define	MAX_ALL_HDRLEN SZ_CPL_TX_PKT + sizeof (struct ether_header) + \
1721 				TCP_MAX_COMBINED_HEADER_LENGTH
1722 	/*
1723 	 * If the first mblk has enough space at the beginning of
1724 	 * the data buffer to hold a CPL header, then, we'll expancd
1725 	 * the front of the buffer so a pullup will leave space for
1726 	 * pe_start() to add the CPL header in line. We need to remember
1727 	 * that we've done this so we can undo it after the pullup.
1728 	 *
1729 	 * Note that if we decide to do an allocb to hold the CPL header,
1730 	 * we need to catch the case where we've added an empty mblk for
1731 	 * the header but never did a pullup. This would result in the
1732 	 * tests for etherheader, etc. being done on the initial, empty,
1733 	 * mblk instead of the one with data. See PR3646 for further
1734 	 * details. (note this PR is closed since it is no longer relevant).
1735 	 *
1736 	 * Another point is that if we do add an allocb to add space for
1737 	 * a CPL header, after a pullup, the initial pointer, mp, in GLD will
1738 	 * no longer point to a valid mblk. When we get the mblk (by allocb),
1739 	 * we need to switch the mblk structure values between it and the
1740 	 * mp structure values referenced by GLD. This handles the case where
1741 	 * we've run out of cmdQ entries and report GLD_NORESOURCES back to
1742 	 * GLD. The pointer to the mblk data will have been modified to hold
1743 	 * an empty 8 bytes for the CPL header, For now, we let the pe_start()
1744 	 * routine prepend an 8 byte mblk.
1745 	 */
1746 	if (MBLKHEAD(mp) >= SZ_CPL_TX_PKT) {
1747 		mp->b_rptr -= SZ_CPL_TX_PKT;
1748 		tflg = 1;
1749 	}
1750 	if (frags > 3) {
1751 		chp->sge->intr_cnt.tx_msg_pullups++;
1752 		if (pullupmsg(mp, -1) == 0) {
1753 			freemsg(mp);
1754 			return (GLD_SUCCESS);
1755 		}
1756 	} else if ((msg_len > MAX_ALL_HDRLEN) &&
1757 	    (MBLKL(mp) < MAX_ALL_HDRLEN)) {
1758 		chp->sge->intr_cnt.tx_hdr_pullups++;
1759 		if (pullupmsg(mp, MAX_ALL_HDRLEN) == 0) {
1760 			freemsg(mp);
1761 			return (GLD_SUCCESS);
1762 		}
1763 	}
1764 	if (tflg)
1765 		mp->b_rptr += SZ_CPL_TX_PKT;
1766 
1767 	ehdr = (struct ether_header *)mp->b_rptr;
1768 	if (ehdr->ether_type == htons(ETHERTYPE_IP)) {
1769 		ihdr = (ipha_t *)&mp->b_rptr[sizeof (struct ether_header)];
1770 		if ((ihdr->ipha_fragment_offset_and_flags & IPH_MF)) {
1771 			if (ihdr->ipha_protocol == IPPROTO_UDP) {
1772 				flg |= CH_UDP_MF;
1773 				chp->sge->intr_cnt.tx_udp_ip_frag++;
1774 			} else if (ihdr->ipha_protocol == IPPROTO_TCP) {
1775 				flg |= CH_TCP_MF;
1776 				chp->sge->intr_cnt.tx_tcp_ip_frag++;
1777 			}
1778 		} else if (ihdr->ipha_protocol == IPPROTO_UDP)
1779 			flg |= CH_UDP;
1780 	}
1781 #endif	/* TX_CKSUM_FIX */
1782 
1783 	/*
1784 	 * return 0 - data send successfully
1785 	 * return 1 - no resources, reschedule
1786 	 */
1787 	if (pe_start(chp, mp, flg))
1788 		return (GLD_NORESOURCES);
1789 	else
1790 		return (GLD_SUCCESS);
1791 }
1792 
1793 static uint_t
1794 ch_intr(gld_mac_info_t *mp)
1795 {
1796 	return (pe_intr((ch_t *)mp->gldm_private));
1797 }
1798 
1799 /*
1800  * generate name of driver with unit# postpended.
1801  */
1802 void
1803 ch_set_name(ch_t *chp, int unit)
1804 {
1805 	chp->ch_name = (char *)kmem_alloc(sizeof ("chxge00"), KM_SLEEP);
1806 	if (unit > 9) {
1807 		bcopy("chxge00", (void *)chp->ch_name, sizeof ("chxge00"));
1808 		chp->ch_name[5] += unit/10;
1809 		chp->ch_name[6] += unit%10;
1810 	} else {
1811 		bcopy("chxge0", (void *)chp->ch_name, sizeof ("chxge0"));
1812 		chp->ch_name[5] += unit;
1813 	}
1814 }
1815 
1816 void
1817 ch_free_name(ch_t *chp)
1818 {
1819 	if (chp->ch_name)
1820 		kmem_free(chp->ch_name, sizeof ("chxge00"));
1821 	chp->ch_name = NULL;
1822 }
1823 
1824 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
1825 /*
1826  * register toe offload.
1827  */
1828 void *
1829 ch_register(void *instp, void *toe_rcv, void *toe_free, void *toe_tunnel,
1830     kmutex_t *toe_tx_mx, kcondvar_t *toe_of_cv, int unit)
1831 {
1832 	ch_t *chp = gchp[unit];
1833 	if (chp != NULL) {
1834 		mutex_enter(&chp->ch_lock);
1835 
1836 		chp->toe_rcv = (void (*)(void *, mblk_t *))toe_rcv;
1837 		chp->ch_toeinst = instp;
1838 		chp->toe_free = (void (*)(void *, tbuf_t *))toe_free;
1839 		chp->toe_tunnel = (int (*)(void *, mblk_t *))toe_tunnel;
1840 		chp->ch_tx_overflow_mutex = toe_tx_mx;
1841 		chp->ch_tx_overflow_cv = toe_of_cv;
1842 		chp->open_device_map |= TOEDEV_DEVMAP_BIT;
1843 
1844 		/* start up adapter if first user */
1845 		chp->ch_refcnt++;
1846 		if (chp->ch_refcnt == 1) {
1847 			chp->ch_state = PERUNNING;
1848 			mutex_exit(&chp->ch_lock);
1849 			pe_init((void *)chp);
1850 		} else
1851 			mutex_exit(&chp->ch_lock);
1852 	}
1853 	return ((void *)gchp[unit]);
1854 }
1855 
1856 /*
1857  * unregister toe offload.
1858  * XXX Need to fix races here.
1859  *     1. turn off SGE interrupts.
1860  *     2. do update
1861  *     3. re-enable SGE interrupts
1862  *     4. SGE doorbell to make sure things get restarted.
1863  */
1864 void
1865 ch_unregister(void)
1866 {
1867 	int i;
1868 	ch_t *chp;
1869 
1870 	for (i = 0; i < MAX_CARDS; i++) {
1871 		chp = gchp[i];
1872 		if (chp == NULL)
1873 			continue;
1874 
1875 		mutex_enter(&chp->ch_lock);
1876 
1877 		chp->ch_refcnt--;
1878 		if (chp->ch_refcnt == 0) {
1879 			chp->ch_state = PESTOP;
1880 			mutex_exit(&chp->ch_lock);
1881 			pe_stop(chp);
1882 		} else
1883 			mutex_exit(&chp->ch_lock);
1884 
1885 		chp->open_device_map &= ~TOEDEV_DEVMAP_BIT;
1886 		chp->toe_rcv = NULL;
1887 		chp->ch_toeinst =  NULL;
1888 		chp->toe_free = NULL;
1889 		chp->toe_tunnel = NULL;
1890 		chp->ch_tx_overflow_mutex = NULL;
1891 		chp->ch_tx_overflow_cv = NULL;
1892 	}
1893 }
1894 #endif	/* CONFIG_CHELSIO_T1_OFFLOAD */
1895 
1896 /*
1897  * get properties from chxge.conf
1898  */
1899 static void
1900 ch_get_prop(ch_t *chp)
1901 {
1902 	int val;
1903 	int tval = 0;
1904 	extern int enable_latency_timer;
1905 	extern uint32_t sge_cmdq0_cnt;
1906 	extern uint32_t sge_cmdq1_cnt;
1907 	extern uint32_t sge_flq0_cnt;
1908 	extern uint32_t sge_flq1_cnt;
1909 	extern uint32_t sge_respq_cnt;
1910 	extern uint32_t sge_cmdq0_cnt_orig;
1911 	extern uint32_t sge_cmdq1_cnt_orig;
1912 	extern uint32_t sge_flq0_cnt_orig;
1913 	extern uint32_t sge_flq1_cnt_orig;
1914 	extern uint32_t sge_respq_cnt_orig;
1915 	dev_info_t *pdip;
1916 	uint32_t vendor_id, device_id, revision_id;
1917 	uint32_t *prop_val = NULL;
1918 	uint32_t prop_len = 0;
1919 
1920 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
1921 	    "enable_dvma", -1);
1922 	if (val == -1)
1923 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
1924 		    "enable-dvma", -1);
1925 	if (val != -1) {
1926 		if (val != 0)
1927 			chp->ch_config.enable_dvma = 1;
1928 	}
1929 
1930 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
1931 	    "amd_bug_workaround", -1);
1932 	if (val == -1)
1933 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
1934 		    "amd-bug-workaround", -1);
1935 
1936 	if (val != -1) {
1937 		if (val == 0) {
1938 			chp->ch_config.burstsize_set = 0;
1939 			chp->ch_config.transaction_cnt_set = 0;
1940 			goto fail_exit;
1941 		}
1942 	}
1943 	/*
1944 	 * Step up to the parent node,  That's the node above us
1945 	 * in the device tree. And will typically be the PCI host
1946 	 * Controller.
1947 	 */
1948 	pdip = ddi_get_parent(chp->ch_dip);
1949 
1950 	/*
1951 	 * Now get the 'Vendor id' properties
1952 	 */
1953 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, pdip, 0, "vendor-id",
1954 	    (int **)&prop_val, &prop_len) != DDI_PROP_SUCCESS) {
1955 		chp->ch_config.burstsize_set = 0;
1956 		chp->ch_config.transaction_cnt_set = 0;
1957 		goto fail_exit;
1958 	}
1959 	vendor_id = *(uint32_t *)prop_val;
1960 	ddi_prop_free(prop_val);
1961 
1962 	/*
1963 	 * Now get the 'Device id' properties
1964 	 */
1965 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, pdip, 0, "device-id",
1966 	    (int **)&prop_val, &prop_len) != DDI_PROP_SUCCESS) {
1967 		chp->ch_config.burstsize_set = 0;
1968 		chp->ch_config.transaction_cnt_set = 0;
1969 		goto fail_exit;
1970 	}
1971 	device_id = *(uint32_t *)prop_val;
1972 	ddi_prop_free(prop_val);
1973 
1974 	/*
1975 	 * Now get the 'Revision id' properties
1976 	 */
1977 	if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, pdip, 0, "revision-id",
1978 	    (int **)&prop_val, &prop_len) != DDI_PROP_SUCCESS) {
1979 		chp->ch_config.burstsize_set = 0;
1980 		chp->ch_config.transaction_cnt_set = 0;
1981 		goto fail_exit;
1982 	}
1983 	revision_id = *(uint32_t *)prop_val;
1984 	ddi_prop_free(prop_val);
1985 
1986 	/*
1987 	 * set default values based on node above us.
1988 	 */
1989 	if ((vendor_id == AMD_VENDOR_ID) && (device_id == AMD_BRIDGE) &&
1990 	    (revision_id <= AMD_BRIDGE_REV)) {
1991 		uint32_t v;
1992 		uint32_t burst;
1993 		uint32_t cnt;
1994 
1995 		/* if 133 Mhz not enabled, then do nothing - we're not PCIx */
1996 		v = pci_config_get32(chp->ch_hpci, 0x64);
1997 		if ((v & 0x20000) == 0) {
1998 			chp->ch_config.burstsize_set = 0;
1999 			chp->ch_config.transaction_cnt_set = 0;
2000 			goto fail_exit;
2001 		}
2002 
2003 		/* check burst size and transaction count */
2004 		v = pci_config_get32(chp->ch_hpci, 0x60);
2005 		burst = (v >> 18) & 3;
2006 		cnt = (v >> 20) & 7;
2007 
2008 		switch (burst) {
2009 		case 0:	/* 512 */
2010 			/* 512 burst size legal with split cnts 1,2,3 */
2011 			if (cnt <= 2) {
2012 				chp->ch_config.burstsize_set = 0;
2013 				chp->ch_config.transaction_cnt_set = 0;
2014 				goto fail_exit;
2015 			}
2016 			break;
2017 		case 1:	/* 1024 */
2018 			/* 1024 burst size legal with split cnts 1,2 */
2019 			if (cnt <= 1) {
2020 				chp->ch_config.burstsize_set = 0;
2021 				chp->ch_config.transaction_cnt_set = 0;
2022 				goto fail_exit;
2023 			}
2024 			break;
2025 		case 2:	/* 2048 */
2026 			/* 2048 burst size legal with split cnts 1 */
2027 			if (cnt == 0) {
2028 				chp->ch_config.burstsize_set = 0;
2029 				chp->ch_config.transaction_cnt_set = 0;
2030 				goto fail_exit;
2031 			}
2032 			break;
2033 		case 3:	/* 4096 */
2034 			break;
2035 		}
2036 	} else {
2037 		goto fail_exit;
2038 	}
2039 
2040 	/*
2041 	 * if illegal burst size seen, then default to 1024 burst size
2042 	 */
2043 	chp->ch_config.burstsize = 1;
2044 	chp->ch_config.burstsize_set = 1;
2045 	/*
2046 	 * if illegal transaction cnt seen, then default to 2
2047 	 */
2048 	chp->ch_config.transaction_cnt = 1;
2049 	chp->ch_config.transaction_cnt_set = 1;
2050 
2051 
2052 fail_exit:
2053 
2054 	/*
2055 	 * alter the burstsize parameter via an entry
2056 	 * in chxge.conf
2057 	 */
2058 
2059 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2060 	    "pci_burstsize", -1);
2061 	if (val == -1)
2062 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2063 		    "pci-burstsize", -1);
2064 
2065 	if (val != -1) {
2066 
2067 		switch (val) {
2068 		case 0:	/* use default */
2069 			chp->ch_config.burstsize_set = 0;
2070 			break;
2071 
2072 		case 1024:
2073 			chp->ch_config.burstsize_set = 1;
2074 			chp->ch_config.burstsize = 1;
2075 			break;
2076 
2077 		case 2048:
2078 			chp->ch_config.burstsize_set = 1;
2079 			chp->ch_config.burstsize = 2;
2080 			break;
2081 
2082 		case 4096:
2083 			cmn_err(CE_WARN, "%s not supported %d\n",
2084 			    chp->ch_name, val);
2085 			break;
2086 
2087 		default:
2088 			cmn_err(CE_WARN, "%s illegal burst size %d\n",
2089 			    chp->ch_name, val);
2090 			break;
2091 		}
2092 	}
2093 
2094 	/*
2095 	 * set transaction count
2096 	 */
2097 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2098 	    "pci_split_transaction_cnt", -1);
2099 	if (val == -1)
2100 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2101 		    "pci-split-transaction-cnt", -1);
2102 
2103 	if (val != -1) {
2104 		switch (val) {
2105 		case 0:	/* use default */
2106 			chp->ch_config.transaction_cnt_set = 0;
2107 			break;
2108 
2109 		case 1:
2110 			chp->ch_config.transaction_cnt_set = 1;
2111 			chp->ch_config.transaction_cnt = 0;
2112 			break;
2113 
2114 		case 2:
2115 			chp->ch_config.transaction_cnt_set = 1;
2116 			chp->ch_config.transaction_cnt = 1;
2117 			break;
2118 
2119 		case 3:
2120 			chp->ch_config.transaction_cnt_set = 1;
2121 			chp->ch_config.transaction_cnt = 2;
2122 			break;
2123 
2124 		case 4:
2125 			chp->ch_config.transaction_cnt_set = 1;
2126 			chp->ch_config.transaction_cnt = 3;
2127 			break;
2128 
2129 		case 8:
2130 			chp->ch_config.transaction_cnt_set = 1;
2131 			chp->ch_config.transaction_cnt = 4;
2132 			break;
2133 
2134 		case 12:
2135 			chp->ch_config.transaction_cnt_set = 1;
2136 			chp->ch_config.transaction_cnt = 5;
2137 			break;
2138 
2139 		case 16:
2140 			chp->ch_config.transaction_cnt_set = 1;
2141 			chp->ch_config.transaction_cnt = 6;
2142 			break;
2143 
2144 		case 32:
2145 			chp->ch_config.transaction_cnt_set = 1;
2146 			chp->ch_config.transaction_cnt = 7;
2147 			break;
2148 
2149 		default:
2150 			cmn_err(CE_WARN, "%s illegal transaction cnt %d\n",
2151 			    chp->ch_name, val);
2152 			break;
2153 		}
2154 	}
2155 
2156 	/*
2157 	 * set relaxed ordering bit?
2158 	 */
2159 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2160 	    "pci_relaxed_ordering_on", -1);
2161 	if (val == -1)
2162 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2163 		    "pci-relaxed-ordering-on", -1);
2164 
2165 	/*
2166 	 * default is to use system default value.
2167 	 */
2168 	chp->ch_config.relaxed_ordering = 0;
2169 
2170 	if (val != -1) {
2171 		if (val)
2172 			chp->ch_config.relaxed_ordering = 1;
2173 	}
2174 
2175 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2176 	    "enable_latency_timer", -1);
2177 	if (val == -1)
2178 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2179 		    "enable-latency-timer", -1);
2180 	if (val != -1)
2181 		enable_latency_timer = (val == 0)? 0: 1;
2182 
2183 	/*
2184 	 * default maximum Jumbo Frame size.
2185 	 */
2186 	chp->ch_maximum_mtu = 9198;	/* tunable via chxge.conf */
2187 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2188 	    "maximum_mtu", -1);
2189 	if (val == -1) {
2190 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2191 		    "maximum-mtu", -1);
2192 	}
2193 	if (val != -1) {
2194 		if (val > 9582) {
2195 			cmn_err(CE_WARN,
2196 			    "maximum_mtu value %d > 9582. Value set to 9582",
2197 			    val);
2198 			val = 9582;
2199 		} else if (val < 1500) {
2200 			cmn_err(CE_WARN,
2201 			    "maximum_mtu value %d < 1500. Value set to 1500",
2202 			    val);
2203 			val = 1500;
2204 		}
2205 
2206 		if (val)
2207 			chp->ch_maximum_mtu = val;
2208 	}
2209 
2210 	/*
2211 	 * default value for this instance mtu
2212 	 */
2213 	chp->ch_mtu = ETHERMTU;
2214 
2215 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2216 	    "accept_jumbo", -1);
2217 	if (val == -1) {
2218 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2219 		    "accept-jumbo", -1);
2220 	}
2221 	if (val != -1) {
2222 		if (val)
2223 			chp->ch_mtu = chp->ch_maximum_mtu;
2224 	}
2225 #ifdef CONFIG_CHELSIO_T1_OFFLOAD
2226 	chp->ch_sm_buf_sz = 0x800;
2227 	chp->ch_sm_buf_aln = 0x800;
2228 	chp->ch_bg_buf_sz = 0x4000;
2229 	chp->ch_bg_buf_aln = 0x4000;
2230 #else
2231 	chp->ch_sm_buf_sz = 0x200;
2232 	chp->ch_sm_buf_aln = 0x200;
2233 	chp->ch_bg_buf_sz = 0x800;
2234 	chp->ch_bg_buf_aln = 0x800;
2235 	if ((chp->ch_mtu > 0x800) && (chp->ch_mtu <= 0x1000)) {
2236 		chp->ch_sm_buf_sz = 0x400;
2237 		chp->ch_sm_buf_aln = 0x400;
2238 		chp->ch_bg_buf_sz = 0x1000;
2239 		chp->ch_bg_buf_aln = 0x1000;
2240 	} else if ((chp->ch_mtu > 0x1000) && (chp->ch_mtu <= 0x2000)) {
2241 		chp->ch_sm_buf_sz = 0x400;
2242 		chp->ch_sm_buf_aln = 0x400;
2243 		chp->ch_bg_buf_sz = 0x2000;
2244 		chp->ch_bg_buf_aln = 0x2000;
2245 	} else if (chp->ch_mtu > 0x2000) {
2246 		chp->ch_sm_buf_sz = 0x400;
2247 		chp->ch_sm_buf_aln = 0x400;
2248 		chp->ch_bg_buf_sz = 0x3000;
2249 		chp->ch_bg_buf_aln = 0x4000;
2250 	}
2251 #endif
2252 	chp->ch_config.cksum_enabled = 1;
2253 
2254 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2255 	    "enable_checksum_offload", -1);
2256 	if (val == -1)
2257 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2258 		    "enable-checksum-offload", -1);
2259 	if (val != -1) {
2260 		if (val == 0)
2261 			chp->ch_config.cksum_enabled = 0;
2262 	}
2263 
2264 	/*
2265 	 * Provides a tuning capability for the command queue 0 size.
2266 	 */
2267 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2268 	    "sge_cmdq0_cnt", -1);
2269 	if (val == -1)
2270 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2271 		    "sge-cmdq0-cnt", -1);
2272 	if (val != -1) {
2273 		if (val > 10)
2274 			sge_cmdq0_cnt = val;
2275 	}
2276 
2277 	if (sge_cmdq0_cnt > 65535) {
2278 		cmn_err(CE_WARN,
2279 		    "%s: sge-cmdQ0-cnt > 65535 - resetting value to default",
2280 		    chp->ch_name);
2281 		sge_cmdq0_cnt = sge_cmdq0_cnt_orig;
2282 	}
2283 	tval += sge_cmdq0_cnt;
2284 
2285 	/*
2286 	 * Provides a tuning capability for the command queue 1 size.
2287 	 */
2288 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2289 	    "sge_cmdq1_cnt", -1);
2290 	if (val == -1)
2291 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2292 		    "sge-cmdq1-cnt", -1);
2293 	if (val != -1) {
2294 		if (val > 10)
2295 			sge_cmdq1_cnt = val;
2296 	}
2297 
2298 	if (sge_cmdq1_cnt > 65535) {
2299 		cmn_err(CE_WARN,
2300 		    "%s: sge-cmdQ0-cnt > 65535 - resetting value to default",
2301 		    chp->ch_name);
2302 		sge_cmdq1_cnt = sge_cmdq1_cnt_orig;
2303 	}
2304 
2305 	/*
2306 	 * Provides a tuning capability for the free list 0 size.
2307 	 */
2308 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2309 	    "sge_flq0_cnt", -1);
2310 	if (val == -1)
2311 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2312 		    "sge-flq0-cnt", -1);
2313 	if (val != -1) {
2314 		if (val > 512)
2315 			sge_flq0_cnt = val;
2316 	}
2317 
2318 	if (sge_flq0_cnt > 65535) {
2319 		cmn_err(CE_WARN,
2320 		    "%s: sge-flq0-cnt > 65535 - resetting value to default",
2321 		    chp->ch_name);
2322 		sge_flq0_cnt = sge_flq0_cnt_orig;
2323 	}
2324 
2325 	tval += sge_flq0_cnt;
2326 
2327 	/*
2328 	 * Provides a tuning capability for the free list 1 size.
2329 	 */
2330 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2331 	    "sge_flq1_cnt", -1);
2332 	if (val == -1)
2333 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2334 		    "sge-flq1-cnt", -1);
2335 	if (val != -1) {
2336 		if (val > 512)
2337 			sge_flq1_cnt = val;
2338 	}
2339 
2340 	if (sge_flq1_cnt > 65535) {
2341 		cmn_err(CE_WARN,
2342 		    "%s: sge-flq1-cnt > 65535 - resetting value to default",
2343 		    chp->ch_name);
2344 		sge_flq1_cnt = sge_flq1_cnt_orig;
2345 	}
2346 
2347 	tval += sge_flq1_cnt;
2348 
2349 	/*
2350 	 * Provides a tuning capability for the responce queue size.
2351 	 */
2352 	val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2353 	    "sge_respq_cnt", -1);
2354 	if (val == -1)
2355 		val = ddi_getprop(DDI_DEV_T_ANY, chp->ch_dip, DDI_PROP_DONTPASS,
2356 		    "sge-respq-cnt", -1);
2357 	if (val != -1) {
2358 		if (val > 30)
2359 			sge_respq_cnt = val;
2360 	}
2361 
2362 	if (sge_respq_cnt > 65535) {
2363 		cmn_err(CE_WARN,
2364 		    "%s: sge-respq-cnt > 65535 - resetting value to default",
2365 		    chp->ch_name);
2366 		sge_respq_cnt = sge_respq_cnt_orig;
2367 	}
2368 
2369 	if (tval > sge_respq_cnt) {
2370 		if (tval <= 65535) {
2371 			cmn_err(CE_WARN,
2372 	    "%s: sge-respq-cnt < %d - setting value to %d (cmdQ+flq0+flq1)",
2373 			    chp->ch_name, tval, tval);
2374 
2375 			sge_respq_cnt = tval;
2376 		} else {
2377 			cmn_err(CE_WARN,
2378 			    "%s: Q sizes invalid - resetting to default values",
2379 			    chp->ch_name);
2380 
2381 			sge_cmdq0_cnt = sge_cmdq0_cnt_orig;
2382 			sge_cmdq1_cnt = sge_cmdq1_cnt_orig;
2383 			sge_flq0_cnt = sge_flq0_cnt_orig;
2384 			sge_flq1_cnt = sge_flq1_cnt_orig;
2385 			sge_respq_cnt = sge_respq_cnt_orig;
2386 		}
2387 	}
2388 }
2389