1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * Copyright (c) 1999-2000 by Sun Microsystems, Inc. 24 * All rights reserved. 25 */ 26 27 #pragma ident "%Z%%M% %I% %E% SMI" 28 29 /* 30 * hci1394_extern.c 31 * Central location for externs. There are two exceptions to this, 32 * hci1394_statep (located in hci1394.c) and hci1394_evts (located in 33 * hci1394_s1394if.c). 34 */ 35 36 #include <sys/conf.h> 37 #include <sys/ddi.h> 38 #include <sys/modctl.h> 39 #include <sys/stat.h> 40 41 #include <sys/1394/h1394.h> 42 43 #include <sys/1394/adapters/hci1394.h> 44 45 46 47 /* 48 * The 1394 bus ticks are in 125uS increments. split_timeout is represented in 49 * 1394 bus ticks. 800 bus ticks is 100mS. 50 */ 51 uint32_t hci1394_split_timeout = 800; 52 53 54 /* 55 * 1394 address map for OpenHCI adpaters. 56 * 57 * This is what is reported to the services layer. The hci1394 driver does not 58 * modify the HW to reflect this. This should reflect what the OpenHCI 1.0 HW 59 * is set to. The comments below give the actual address ranges where the 60 * actual structure has the format of - start address, size, type. 61 * 62 * physical => 0x0000000000000000 - 0x00000000FFFFFFFF 63 * posted write => 0x0000000100000000 - 0x0000FFFEFFFFFFFF 64 * normal => 0x0000FFFF00000000 - 0x0000FFFFEFFFFFFF 65 * csr => 0x0000FFFFF0000000 - 0x0000FFFFFFFFFFFF 66 */ 67 h1394_addr_map_t hci1394_addr_map[HCI1394_ADDR_MAP_SIZE] = { 68 {0x0000000000000000, 0x0000000100000000, H1394_ADDR_PHYSICAL}, 69 {0x0000000100000000, 0x0000FFFE00000000, H1394_ADDR_POSTED_WRITE}, 70 {0x0000FFFF00000000, 0x00000000F0000000, H1394_ADDR_NORMAL}, 71 {0x0000FFFFF0000000, 0x0000000010000000, H1394_ADDR_CSR} 72 }; 73 74 75 /* Max number of uS to wait for phy reads & writes to finish */ 76 uint_t hci1394_phy_delay_uS = 10; 77 78 /* 79 * Time to wait for PHY to SCLK to be stable. There does not seem to be standard 80 * time for how long wait for the PHY to come up. The problem is that the PHY 81 * provides a clock to the link layer and if that is not stable, we could get a 82 * PCI timeout error when reading/writing a phy register (and maybe an OpenHCI 83 * register?) This used to be set to 10mS which works for just about every 84 * adapter we tested on. We got a new TI adapter which would crash the system 85 * once in a while if nothing (1394 device) was plugged into the adapter? 86 * Changing this delay to 50mS made that problem go away. 87 * 88 * NOTE: Do not this delay unless you know what your doing!!!! 89 */ 90 uint_t hci1394_phy_stabilization_delay_uS = 50000; 91