fs/zfs/vdev_indirect.c

/*
 * CDDL HEADER START
 *
 * This file and its contents are supplied under the terms of the
 * Common Development and Distribution License ("CDDL"), version 1.0.
 * You may only use this file in accordance with the terms of version
 * 1.0 of the CDDL.
 *
 * A full copy of the text of the CDDL should have accompanied this
 * source.  A copy of the CDDL is also available via the Internet at
 * http://www.illumos.org/license/CDDL.
 *
 * CDDL HEADER END
 */

/*
 * Copyright (c) 2014, 2019 by Delphix. All rights reserved.
 */

#include <sys/zfs_context.h>
#include <sys/spa.h>
#include <sys/spa_impl.h>
#include <sys/vdev_impl.h>
#include <sys/fs/zfs.h>
#include <sys/zio.h>
#include <sys/zio_checksum.h>
#include <sys/metaslab.h>
#include <sys/refcount.h>
#include <sys/dmu.h>
#include <sys/vdev_indirect_mapping.h>
#include <sys/dmu_tx.h>
#include <sys/dsl_synctask.h>
#include <sys/zap.h>
#include <sys/abd.h>
#include <sys/zthr.h>

/*
 * An indirect vdev corresponds to a vdev that has been removed.  Since
 * we cannot rewrite block pointers of snapshots, etc., we keep a
 * mapping from old location on the removed device to the new location
 * on another device in the pool and use this mapping whenever we need
 * to access the DVA.  Unfortunately, this mapping did not respect
 * logical block boundaries when it was first created, and so a DVA on
 * this indirect vdev may be "split" into multiple sections that each
 * map to a different location.  As a consequence, not all DVAs can be
 * translated to an equivalent new DVA.  Instead we must provide a
 * "vdev_remap" operation that executes a callback on each contiguous
 * segment of the new location.  This function is used in multiple ways:
 *
 *  - i/os to this vdev use the callback to determine where the
 *    data is now located, and issue child i/os for each segment's new
 *    location.
 *
 *  - frees and claims to this vdev use the callback to free or claim
 *    each mapped segment.  (Note that we don't actually need to claim
 *    log blocks on indirect vdevs, because we don't allocate to
 *    removing vdevs.  However, zdb uses zio_claim() for its leak
 *    detection.)
 */

/*
 * "Big theory statement" for how we mark blocks obsolete.
 *
 * When a block on an indirect vdev is freed or remapped, a section of
 * that vdev's mapping may no longer be referenced (aka "obsolete").  We
 * keep track of how much of each mapping entry is obsolete.  When
 * an entry becomes completely obsolete, we can remove it, thus reducing
 * the memory used by the mapping.  The complete picture of obsolescence
 * is given by the following data structures, described below:
 *  - the entry-specific obsolete count
 *  - the vdev-specific obsolete spacemap
 *  - the pool-specific obsolete bpobj
 *
 * == On disk data structures used ==
 *
 * We track the obsolete space for the pool using several objects.  Each
 * of these objects is created on demand and freed when no longer
 * needed, and is assumed to be empty if it does not exist.
 * SPA_FEATURE_OBSOLETE_COUNTS includes the count of these objects.
 *
 *  - Each vic_mapping_object (associated with an indirect vdev) can
 *    have a vimp_counts_object.  This is an array of uint32_t's
 *    with the same number of entries as the vic_mapping_object.  When
 *    the mapping is condensed, entries from the vic_obsolete_sm_object
 *    (see below) are folded into the counts.  Therefore, each
 *    obsolete_counts entry tells us the number of bytes in the
 *    corresponding mapping entry that were not referenced when the
 *    mapping was last condensed.
 *
 *  - Each indirect or removing vdev can have a vic_obsolete_sm_object.
 *    This is a space map containing an alloc entry for every DVA that
 *    has been obsoleted since the last time this indirect vdev was
 *    condensed.  We use this object in order to improve performance
 *    when marking a DVA as obsolete.  Instead of modifying an arbitrary
 *    offset of the vimp_counts_object, we only need to append an entry
 *    to the end of this object.  When a DVA becomes obsolete, it is
 *    added to the obsolete space map.  This happens when the DVA is
 *    freed, remapped and not referenced by a snapshot, or the last
 *    snapshot referencing it is destroyed.
 *
 *  - Each dataset can have a ds_remap_deadlist object.  This is a
 *    deadlist object containing all blocks that were remapped in this
 *    dataset but referenced in a previous snapshot.  Blocks can *only*
 *    appear on this list if they were remapped (dsl_dataset_block_remapped);
 *    blocks that were killed in a head dataset are put on the normal
 *    ds_deadlist and marked obsolete when they are freed.
 *
 *  - The pool can have a dp_obsolete_bpobj.  This is a list of blocks
 *    in the pool that need to be marked obsolete.  When a snapshot is
 *    destroyed, we move some of the ds_remap_deadlist to the obsolete
 *    bpobj (see dsl_destroy_snapshot_handle_remaps()).  We then
 *    asynchronously process the obsolete bpobj, moving its entries to
 *    the specific vdevs' obsolete space maps.
 *
 * == Summary of how we mark blocks as obsolete ==
 *
 * - When freeing a block: if any DVA is on an indirect vdev, append to
 *   vic_obsolete_sm_object.
 * - When remapping a block, add dva to ds_remap_deadlist (if prev snap
 *   references; otherwise append to vic_obsolete_sm_object).
 * - When freeing a snapshot: move parts of ds_remap_deadlist to
 *   dp_obsolete_bpobj (same algorithm as ds_deadlist).
 * - When syncing the spa: process dp_obsolete_bpobj, moving ranges to
 *   individual vdev's vic_obsolete_sm_object.
 */

/*
 * "Big theory statement" for how we condense indirect vdevs.
 *
 * Condensing an indirect vdev's mapping is the process of determining
 * the precise counts of obsolete space for each mapping entry (by
 * integrating the obsolete spacemap into the obsolete counts) and
 * writing out a new mapping that contains only referenced entries.
 *
 * We condense a vdev when we expect the mapping to shrink (see
 * vdev_indirect_should_condense()), but only perform one condense at a
 * time to limit the memory usage.  In addition, we use a separate
 * open-context thread (spa_condense_indirect_thread) to incrementally
 * create the new mapping object in a way that minimizes the impact on
 * the rest of the system.
 *
 * == Generating a new mapping ==
 *
 * To generate a new mapping, we follow these steps:
 *
 * 1. Save the old obsolete space map and create a new mapping object
 *    (see spa_condense_indirect_start_sync()).  This initializes the
 *    spa_condensing_indirect_phys with the "previous obsolete space map",
 *    which is now read only.  Newly obsolete DVAs will be added to a
 *    new (initially empty) obsolete space map, and will not be
 *    considered as part of this condense operation.
 *
 * 2. Construct in memory the precise counts of obsolete space for each
 *    mapping entry, by incorporating the obsolete space map into the
 *    counts.  (See vdev_indirect_mapping_load_obsolete_{counts,spacemap}().)
 *
 * 3. Iterate through each mapping entry, writing to the new mapping any
 *    entries that are not completely obsolete (i.e. which don't have
 *    obsolete count == mapping length).  (See
 *    spa_condense_indirect_generate_new_mapping().)
 *
 * 4. Destroy the old mapping object and switch over to the new one
 *    (spa_condense_indirect_complete_sync).
 *
 * == Restarting from failure ==
 *
 * To restart the condense when we import/open the pool, we must start
 * at the 2nd step above: reconstruct the precise counts in memory,
 * based on the space map + counts.  Then in the 3rd step, we start
 * iterating where we left off: at vimp_max_offset of the new mapping
 * object.
 */

boolean_t zfs_condense_indirect_vdevs_enable = B_TRUE;

/*
 * Condense if at least this percent of the bytes in the mapping is
 * obsolete.  With the default of 25%, the amount of space mapped
 * will be reduced to 1% of its original size after at most 16
 * condenses.  Higher values will condense less often (causing less
 * i/o); lower values will reduce the mapping size more quickly.
 */
int zfs_indirect_condense_obsolete_pct = 25;

/*
 * Condense if the obsolete space map takes up more than this amount of
 * space on disk (logically).  This limits the amount of disk space
 * consumed by the obsolete space map; the default of 1GB is small enough
 * that we typically don't mind "wasting" it.
 */
uint64_t zfs_condense_max_obsolete_bytes = 1024 * 1024 * 1024;

/*
 * Don't bother condensing if the mapping uses less than this amount of
 * memory.  The default of 128KB is considered a "trivial" amount of
 * memory and not worth reducing.
 */
uint64_t zfs_condense_min_mapping_bytes = 128 * 1024;

/*
 * This is used by the test suite so that it can ensure that certain
 * actions happen while in the middle of a condense (which might otherwise
 * complete too quickly).  If used to reduce the performance impact of
 * condensing in production, a maximum value of 1 should be sufficient.
 */
int zfs_condense_indirect_commit_entry_delay_ticks = 0;

/*
 * If an indirect split block contains more than this many possible unique
 * combinations when being reconstructed, consider it too computationally
 * expensive to check them all. Instead, try at most 100 randomly-selected
 * combinations each time the block is accessed.  This allows all segment
 * copies to participate fairly in the reconstruction when all combinations
 * cannot be checked and prevents repeated use of one bad copy.
 */
int zfs_reconstruct_indirect_combinations_max = 256;


/*
 * Enable to simulate damaged segments and validate reconstruction.
 * Used by ztest
 */
unsigned long zfs_reconstruct_indirect_damage_fraction = 0;

/*
 * The indirect_child_t represents the vdev that we will read from, when we
 * need to read all copies of the data (e.g. for scrub or reconstruction).
 * For plain (non-mirror) top-level vdevs (i.e. is_vdev is not a mirror),
 * ic_vdev is the same as is_vdev.  However, for mirror top-level vdevs,
 * ic_vdev is a child of the mirror.
 */
typedef struct indirect_child {
	abd_t *ic_data;
	vdev_t *ic_vdev;

	/*
	 * ic_duplicate is NULL when the ic_data contents are unique, when it
	 * is determined to be a duplicate it references the primary child.
	 */
	struct indirect_child *ic_duplicate;
	list_node_t ic_node; /* node on is_unique_child */
} indirect_child_t;

/*
 * The indirect_split_t represents one mapped segment of an i/o to the
 * indirect vdev. For non-split (contiguously-mapped) blocks, there will be
 * only one indirect_split_t, with is_split_offset==0 and is_size==io_size.
 * For split blocks, there will be several of these.
 */
typedef struct indirect_split {
	list_node_t is_node; /* link on iv_splits */

	/*
	 * is_split_offset is the offset into the i/o.
	 * This is the sum of the previous splits' is_size's.
	 */
	uint64_t is_split_offset;

	vdev_t *is_vdev; /* top-level vdev */
	uint64_t is_target_offset; /* offset on is_vdev */
	uint64_t is_size;
	int is_children; /* number of entries in is_child[] */
	int is_unique_children; /* number of entries in is_unique_child */
	list_t is_unique_child;

	/*
	 * is_good_child is the child that we are currently using to
	 * attempt reconstruction.
	 */
	indirect_child_t *is_good_child;

	indirect_child_t is_child[1]; /* variable-length */
} indirect_split_t;

/*
 * The indirect_vsd_t is associated with each i/o to the indirect vdev.
 * It is the "Vdev-Specific Data" in the zio_t's io_vsd.
 */
typedef struct indirect_vsd {
	boolean_t iv_split_block;
	boolean_t iv_reconstruct;
	uint64_t iv_unique_combinations;
	uint64_t iv_attempts;
	uint64_t iv_attempts_max;

	list_t iv_splits; /* list of indirect_split_t's */
} indirect_vsd_t;

static void
vdev_indirect_map_free(zio_t *zio)
{
	indirect_vsd_t *iv = zio->io_vsd;

	indirect_split_t *is;
	while ((is = list_head(&iv->iv_splits)) != NULL) {
		for (int c = 0; c < is->is_children; c++) {
			indirect_child_t *ic = &is->is_child[c];
			if (ic->ic_data != NULL)
				abd_free(ic->ic_data);
		}
		list_remove(&iv->iv_splits, is);

		indirect_child_t *ic;
		while ((ic = list_head(&is->is_unique_child)) != NULL)
			list_remove(&is->is_unique_child, ic);

		list_destroy(&is->is_unique_child);

		kmem_free(is,
		    offsetof(indirect_split_t, is_child[is->is_children]));
	}
	kmem_free(iv, sizeof (*iv));
}

static const zio_vsd_ops_t vdev_indirect_vsd_ops = {
	vdev_indirect_map_free,
	zio_vsd_default_cksum_report
};
/*
 * Mark the given offset and size as being obsolete.
 */
void
vdev_indirect_mark_obsolete(vdev_t *vd, uint64_t offset, uint64_t size)
{
	spa_t *spa = vd->vdev_spa;

	ASSERT3U(vd->vdev_indirect_config.vic_mapping_object, !=, 0);
	ASSERT(vd->vdev_removing || vd->vdev_ops == &vdev_indirect_ops);
	ASSERT(size > 0);
	VERIFY(vdev_indirect_mapping_entry_for_offset(
	    vd->vdev_indirect_mapping, offset) != NULL);

	if (spa_feature_is_enabled(spa, SPA_FEATURE_OBSOLETE_COUNTS)) {
		mutex_enter(&vd->vdev_obsolete_lock);
		range_tree_add(vd->vdev_obsolete_segments, offset, size);
		mutex_exit(&vd->vdev_obsolete_lock);
		vdev_dirty(vd, 0, NULL, spa_syncing_txg(spa));
	}
}

/*
 * Mark the DVA vdev_id:offset:size as being obsolete in the given tx. This
 * wrapper is provided because the DMU does not know about vdev_t's and
 * cannot directly call vdev_indirect_mark_obsolete.
 */
void
spa_vdev_indirect_mark_obsolete(spa_t *spa, uint64_t vdev_id, uint64_t offset,
    uint64_t size, dmu_tx_t *tx)
{
	vdev_t *vd = vdev_lookup_top(spa, vdev_id);
	ASSERT(dmu_tx_is_syncing(tx));

	/* The DMU can only remap indirect vdevs. */
	ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
	vdev_indirect_mark_obsolete(vd, offset, size);
}

static spa_condensing_indirect_t *
spa_condensing_indirect_create(spa_t *spa)
{
	spa_condensing_indirect_phys_t *scip =
	    &spa->spa_condensing_indirect_phys;
	spa_condensing_indirect_t *sci = kmem_zalloc(sizeof (*sci), KM_SLEEP);
	objset_t *mos = spa->spa_meta_objset;

	for (int i = 0; i < TXG_SIZE; i++) {
		list_create(&sci->sci_new_mapping_entries[i],
		    sizeof (vdev_indirect_mapping_entry_t),
		    offsetof(vdev_indirect_mapping_entry_t, vime_node));
	}

	sci->sci_new_mapping =
	    vdev_indirect_mapping_open(mos, scip->scip_next_mapping_object);

	return (sci);
}

static void
spa_condensing_indirect_destroy(spa_condensing_indirect_t *sci)
{
	for (int i = 0; i < TXG_SIZE; i++)
		list_destroy(&sci->sci_new_mapping_entries[i]);

	if (sci->sci_new_mapping != NULL)
		vdev_indirect_mapping_close(sci->sci_new_mapping);

	kmem_free(sci, sizeof (*sci));
}

boolean_t
vdev_indirect_should_condense(vdev_t *vd)
{
	vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
	spa_t *spa = vd->vdev_spa;

	ASSERT(dsl_pool_sync_context(spa->spa_dsl_pool));

	if (!zfs_condense_indirect_vdevs_enable)
		return (B_FALSE);

	/*
	 * We can only condense one indirect vdev at a time.
	 */
	if (spa->spa_condensing_indirect != NULL)
		return (B_FALSE);

	if (spa_shutting_down(spa))
		return (B_FALSE);

	/*
	 * The mapping object size must not change while we are
	 * condensing, so we can only condense indirect vdevs
	 * (not vdevs that are still in the middle of being removed).
	 */
	if (vd->vdev_ops != &vdev_indirect_ops)
		return (B_FALSE);

	/*
	 * If nothing new has been marked obsolete, there is no
	 * point in condensing.
	 */
	if (vd->vdev_obsolete_sm == NULL) {
		ASSERT0(vdev_obsolete_sm_object(vd));
		return (B_FALSE);
	}

	ASSERT(vd->vdev_obsolete_sm != NULL);

	ASSERT3U(vdev_obsolete_sm_object(vd), ==,
	    space_map_object(vd->vdev_obsolete_sm));

	uint64_t bytes_mapped = vdev_indirect_mapping_bytes_mapped(vim);
	uint64_t bytes_obsolete = space_map_allocated(vd->vdev_obsolete_sm);
	uint64_t mapping_size = vdev_indirect_mapping_size(vim);
	uint64_t obsolete_sm_size = space_map_length(vd->vdev_obsolete_sm);

	ASSERT3U(bytes_obsolete, <=, bytes_mapped);

	/*
	 * If a high percentage of the bytes that are mapped have become
	 * obsolete, condense (unless the mapping is already small enough).
	 * This has a good chance of reducing the amount of memory used
	 * by the mapping.
	 */
	if (bytes_obsolete * 100 / bytes_mapped >=
	    zfs_indirect_condense_obsolete_pct &&
	    mapping_size > zfs_condense_min_mapping_bytes) {
		zfs_dbgmsg("should condense vdev %llu because obsolete "
		    "spacemap covers %d%% of %lluMB mapping",
		    (u_longlong_t)vd->vdev_id,
		    (int)(bytes_obsolete * 100 / bytes_mapped),
		    (u_longlong_t)bytes_mapped / 1024 / 1024);
		return (B_TRUE);
	}

	/*
	 * If the obsolete space map takes up too much space on disk,
	 * condense in order to free up this disk space.
	 */
	if (obsolete_sm_size >= zfs_condense_max_obsolete_bytes) {
		zfs_dbgmsg("should condense vdev %llu because obsolete sm "
		    "length %lluMB >= max size %lluMB",
		    (u_longlong_t)vd->vdev_id,
		    (u_longlong_t)obsolete_sm_size / 1024 / 1024,
		    (u_longlong_t)zfs_condense_max_obsolete_bytes /
		    1024 / 1024);
		return (B_TRUE);
	}

	return (B_FALSE);
}

/*
 * This sync task completes (finishes) a condense, deleting the old
 * mapping and replacing it with the new one.
 */
static void
spa_condense_indirect_complete_sync(void *arg, dmu_tx_t *tx)
{
	spa_condensing_indirect_t *sci = arg;
	spa_t *spa = dmu_tx_pool(tx)->dp_spa;
	spa_condensing_indirect_phys_t *scip =
	    &spa->spa_condensing_indirect_phys;
	vdev_t *vd = vdev_lookup_top(spa, scip->scip_vdev);
	vdev_indirect_config_t *vic = &vd->vdev_indirect_config;
	objset_t *mos = spa->spa_meta_objset;
	vdev_indirect_mapping_t *old_mapping = vd->vdev_indirect_mapping;
	uint64_t old_count = vdev_indirect_mapping_num_entries(old_mapping);
	uint64_t new_count =
	    vdev_indirect_mapping_num_entries(sci->sci_new_mapping);

	ASSERT(dmu_tx_is_syncing(tx));
	ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
	ASSERT3P(sci, ==, spa->spa_condensing_indirect);
	for (int i = 0; i < TXG_SIZE; i++) {
		ASSERT(list_is_empty(&sci->sci_new_mapping_entries[i]));
	}
	ASSERT(vic->vic_mapping_object != 0);
	ASSERT3U(vd->vdev_id, ==, scip->scip_vdev);
	ASSERT(scip->scip_next_mapping_object != 0);
	ASSERT(scip->scip_prev_obsolete_sm_object != 0);

	/*
	 * Reset vdev_indirect_mapping to refer to the new object.
	 */
	rw_enter(&vd->vdev_indirect_rwlock, RW_WRITER);
	vdev_indirect_mapping_close(vd->vdev_indirect_mapping);
	vd->vdev_indirect_mapping = sci->sci_new_mapping;
	rw_exit(&vd->vdev_indirect_rwlock);

	sci->sci_new_mapping = NULL;
	vdev_indirect_mapping_free(mos, vic->vic_mapping_object, tx);
	vic->vic_mapping_object = scip->scip_next_mapping_object;
	scip->scip_next_mapping_object = 0;

	space_map_free_obj(mos, scip->scip_prev_obsolete_sm_object, tx);
	spa_feature_decr(spa, SPA_FEATURE_OBSOLETE_COUNTS, tx);
	scip->scip_prev_obsolete_sm_object = 0;

	scip->scip_vdev = 0;

	VERIFY0(zap_remove(mos, DMU_POOL_DIRECTORY_OBJECT,
	    DMU_POOL_CONDENSING_INDIRECT, tx));
	spa_condensing_indirect_destroy(spa->spa_condensing_indirect);
	spa->spa_condensing_indirect = NULL;

	zfs_dbgmsg("finished condense of vdev %llu in txg %llu: "
	    "new mapping object %llu has %llu entries "
	    "(was %llu entries)",
	    vd->vdev_id, dmu_tx_get_txg(tx), vic->vic_mapping_object,
	    new_count, old_count);

	vdev_config_dirty(spa->spa_root_vdev);
}

/*
 * This sync task appends entries to the new mapping object.
 */
static void
spa_condense_indirect_commit_sync(void *arg, dmu_tx_t *tx)
{
	spa_condensing_indirect_t *sci = arg;
	uint64_t txg = dmu_tx_get_txg(tx);
	spa_t *spa = dmu_tx_pool(tx)->dp_spa;

	ASSERT(dmu_tx_is_syncing(tx));
	ASSERT3P(sci, ==, spa->spa_condensing_indirect);

	vdev_indirect_mapping_add_entries(sci->sci_new_mapping,
	    &sci->sci_new_mapping_entries[txg & TXG_MASK], tx);
	ASSERT(list_is_empty(&sci->sci_new_mapping_entries[txg & TXG_MASK]));
}

/*
 * Open-context function to add one entry to the new mapping.  The new
 * entry will be remembered and written from syncing context.
 */
static void
spa_condense_indirect_commit_entry(spa_t *spa,
    vdev_indirect_mapping_entry_phys_t *vimep, uint32_t count)
{
	spa_condensing_indirect_t *sci = spa->spa_condensing_indirect;

	ASSERT3U(count, <, DVA_GET_ASIZE(&vimep->vimep_dst));

	dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir);
	dmu_tx_hold_space(tx, sizeof (*vimep) + sizeof (count));
	VERIFY0(dmu_tx_assign(tx, TXG_WAIT));
	int txgoff = dmu_tx_get_txg(tx) & TXG_MASK;

	/*
	 * If we are the first entry committed this txg, kick off the sync
	 * task to write to the MOS on our behalf.
	 */
	if (list_is_empty(&sci->sci_new_mapping_entries[txgoff])) {
		dsl_sync_task_nowait(dmu_tx_pool(tx),
		    spa_condense_indirect_commit_sync, sci,
		    0, ZFS_SPACE_CHECK_NONE, tx);
	}

	vdev_indirect_mapping_entry_t *vime =
	    kmem_alloc(sizeof (*vime), KM_SLEEP);
	vime->vime_mapping = *vimep;
	vime->vime_obsolete_count = count;
	list_insert_tail(&sci->sci_new_mapping_entries[txgoff], vime);

	dmu_tx_commit(tx);
}

static void
spa_condense_indirect_generate_new_mapping(vdev_t *vd,
    uint32_t *obsolete_counts, uint64_t start_index, zthr_t *zthr)
{
	spa_t *spa = vd->vdev_spa;
	uint64_t mapi = start_index;
	vdev_indirect_mapping_t *old_mapping = vd->vdev_indirect_mapping;
	uint64_t old_num_entries =
	    vdev_indirect_mapping_num_entries(old_mapping);

	ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
	ASSERT3U(vd->vdev_id, ==, spa->spa_condensing_indirect_phys.scip_vdev);

	zfs_dbgmsg("starting condense of vdev %llu from index %llu",
	    (u_longlong_t)vd->vdev_id,
	    (u_longlong_t)mapi);

	while (mapi < old_num_entries) {

		if (zthr_iscancelled(zthr)) {
			zfs_dbgmsg("pausing condense of vdev %llu "
			    "at index %llu", (u_longlong_t)vd->vdev_id,
			    (u_longlong_t)mapi);
			break;
		}

		vdev_indirect_mapping_entry_phys_t *entry =
		    &old_mapping->vim_entries[mapi];
		uint64_t entry_size = DVA_GET_ASIZE(&entry->vimep_dst);
		ASSERT3U(obsolete_counts[mapi], <=, entry_size);
		if (obsolete_counts[mapi] < entry_size) {
			spa_condense_indirect_commit_entry(spa, entry,
			    obsolete_counts[mapi]);

			/*
			 * This delay may be requested for testing, debugging,
			 * or performance reasons.
			 */
			delay(zfs_condense_indirect_commit_entry_delay_ticks);
		}

		mapi++;
	}
}

/* ARGSUSED */
static boolean_t
spa_condense_indirect_thread_check(void *arg, zthr_t *zthr)
{
	spa_t *spa = arg;

	return (spa->spa_condensing_indirect != NULL);
}

/* ARGSUSED */
static void
spa_condense_indirect_thread(void *arg, zthr_t *zthr)
{
	spa_t *spa = arg;
	vdev_t *vd;

	ASSERT3P(spa->spa_condensing_indirect, !=, NULL);
	spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
	vd = vdev_lookup_top(spa, spa->spa_condensing_indirect_phys.scip_vdev);
	ASSERT3P(vd, !=, NULL);
	spa_config_exit(spa, SCL_VDEV, FTAG);

	spa_condensing_indirect_t *sci = spa->spa_condensing_indirect;
	spa_condensing_indirect_phys_t *scip =
	    &spa->spa_condensing_indirect_phys;
	uint32_t *counts;
	uint64_t start_index;
	vdev_indirect_mapping_t *old_mapping = vd->vdev_indirect_mapping;
	space_map_t *prev_obsolete_sm = NULL;

	ASSERT3U(vd->vdev_id, ==, scip->scip_vdev);
	ASSERT(scip->scip_next_mapping_object != 0);
	ASSERT(scip->scip_prev_obsolete_sm_object != 0);
	ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);

	for (int i = 0; i < TXG_SIZE; i++) {
		/*
		 * The list must start out empty in order for the
		 * _commit_sync() sync task to be properly registered
		 * on the first call to _commit_entry(); so it's wise
		 * to double check and ensure we actually are starting
		 * with empty lists.
		 */
		ASSERT(list_is_empty(&sci->sci_new_mapping_entries[i]));
	}

	VERIFY0(space_map_open(&prev_obsolete_sm, spa->spa_meta_objset,
	    scip->scip_prev_obsolete_sm_object, 0, vd->vdev_asize, 0));
	counts = vdev_indirect_mapping_load_obsolete_counts(old_mapping);
	if (prev_obsolete_sm != NULL) {
		vdev_indirect_mapping_load_obsolete_spacemap(old_mapping,
		    counts, prev_obsolete_sm);
	}
	space_map_close(prev_obsolete_sm);

	/*
	 * Generate new mapping.  Determine what index to continue from
	 * based on the max offset that we've already written in the
	 * new mapping.
	 */
	uint64_t max_offset =
	    vdev_indirect_mapping_max_offset(sci->sci_new_mapping);
	if (max_offset == 0) {
		/* We haven't written anything to the new mapping yet. */
		start_index = 0;
	} else {
		/*
		 * Pick up from where we left off. _entry_for_offset()
		 * returns a pointer into the vim_entries array. If
		 * max_offset is greater than any of the mappings
		 * contained in the table  NULL will be returned and
		 * that indicates we've exhausted our iteration of the
		 * old_mapping.
		 */

		vdev_indirect_mapping_entry_phys_t *entry =
		    vdev_indirect_mapping_entry_for_offset_or_next(old_mapping,
		    max_offset);

		if (entry == NULL) {
			/*
			 * We've already written the whole new mapping.
			 * This special value will cause us to skip the
			 * generate_new_mapping step and just do the sync
			 * task to complete the condense.
			 */
			start_index = UINT64_MAX;
		} else {
			start_index = entry - old_mapping->vim_entries;
			ASSERT3U(start_index, <,
			    vdev_indirect_mapping_num_entries(old_mapping));
		}
	}

	spa_condense_indirect_generate_new_mapping(vd, counts,
	    start_index, zthr);

	vdev_indirect_mapping_free_obsolete_counts(old_mapping, counts);

	/*
	 * If the zthr has received a cancellation signal while running
	 * in generate_new_mapping() or at any point after that, then bail
	 * early. We don't want to complete the condense if the spa is
	 * shutting down.
	 */
	if (zthr_iscancelled(zthr))
		return;

	VERIFY0(dsl_sync_task(spa_name(spa), NULL,
	    spa_condense_indirect_complete_sync, sci, 0,
	    ZFS_SPACE_CHECK_EXTRA_RESERVED));
}

/*
 * Sync task to begin the condensing process.
 */
void
spa_condense_indirect_start_sync(vdev_t *vd, dmu_tx_t *tx)
{
	spa_t *spa = vd->vdev_spa;
	spa_condensing_indirect_phys_t *scip =
	    &spa->spa_condensing_indirect_phys;

	ASSERT0(scip->scip_next_mapping_object);
	ASSERT0(scip->scip_prev_obsolete_sm_object);
	ASSERT0(scip->scip_vdev);
	ASSERT(dmu_tx_is_syncing(tx));
	ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
	ASSERT(spa_feature_is_active(spa, SPA_FEATURE_OBSOLETE_COUNTS));
	ASSERT(vdev_indirect_mapping_num_entries(vd->vdev_indirect_mapping));

	uint64_t obsolete_sm_obj = vdev_obsolete_sm_object(vd);
	ASSERT(obsolete_sm_obj != 0);

	scip->scip_vdev = vd->vdev_id;
	scip->scip_next_mapping_object =
	    vdev_indirect_mapping_alloc(spa->spa_meta_objset, tx);

	scip->scip_prev_obsolete_sm_object = obsolete_sm_obj;

	/*
	 * We don't need to allocate a new space map object, since
	 * vdev_indirect_sync_obsolete will allocate one when needed.
	 */
	space_map_close(vd->vdev_obsolete_sm);
	vd->vdev_obsolete_sm = NULL;
	VERIFY0(zap_remove(spa->spa_meta_objset, vd->vdev_top_zap,
	    VDEV_TOP_ZAP_INDIRECT_OBSOLETE_SM, tx));

	VERIFY0(zap_add(spa->spa_dsl_pool->dp_meta_objset,
	    DMU_POOL_DIRECTORY_OBJECT,
	    DMU_POOL_CONDENSING_INDIRECT, sizeof (uint64_t),
	    sizeof (*scip) / sizeof (uint64_t), scip, tx));

	ASSERT3P(spa->spa_condensing_indirect, ==, NULL);
	spa->spa_condensing_indirect = spa_condensing_indirect_create(spa);

	zfs_dbgmsg("starting condense of vdev %llu in txg %llu: "
	    "posm=%llu nm=%llu",
	    vd->vdev_id, dmu_tx_get_txg(tx),
	    (u_longlong_t)scip->scip_prev_obsolete_sm_object,
	    (u_longlong_t)scip->scip_next_mapping_object);

	zthr_wakeup(spa->spa_condense_zthr);
}

/*
 * Sync to the given vdev's obsolete space map any segments that are no longer
 * referenced as of the given txg.
 *
 * If the obsolete space map doesn't exist yet, create and open it.
 */
void
vdev_indirect_sync_obsolete(vdev_t *vd, dmu_tx_t *tx)
{
	spa_t *spa = vd->vdev_spa;
	vdev_indirect_config_t *vic = &vd->vdev_indirect_config;

	ASSERT3U(vic->vic_mapping_object, !=, 0);
	ASSERT(range_tree_space(vd->vdev_obsolete_segments) > 0);
	ASSERT(vd->vdev_removing || vd->vdev_ops == &vdev_indirect_ops);
	ASSERT(spa_feature_is_enabled(spa, SPA_FEATURE_OBSOLETE_COUNTS));

	if (vdev_obsolete_sm_object(vd) == 0) {
		uint64_t obsolete_sm_object =
		    space_map_alloc(spa->spa_meta_objset,
		    zfs_vdev_standard_sm_blksz, tx);

		ASSERT(vd->vdev_top_zap != 0);
		VERIFY0(zap_add(vd->vdev_spa->spa_meta_objset, vd->vdev_top_zap,
		    VDEV_TOP_ZAP_INDIRECT_OBSOLETE_SM,
		    sizeof (obsolete_sm_object), 1, &obsolete_sm_object, tx));
		ASSERT3U(vdev_obsolete_sm_object(vd), !=, 0);

		spa_feature_incr(spa, SPA_FEATURE_OBSOLETE_COUNTS, tx);
		VERIFY0(space_map_open(&vd->vdev_obsolete_sm,
		    spa->spa_meta_objset, obsolete_sm_object,
		    0, vd->vdev_asize, 0));
	}

	ASSERT(vd->vdev_obsolete_sm != NULL);
	ASSERT3U(vdev_obsolete_sm_object(vd), ==,
	    space_map_object(vd->vdev_obsolete_sm));

	space_map_write(vd->vdev_obsolete_sm,
	    vd->vdev_obsolete_segments, SM_ALLOC, SM_NO_VDEVID, tx);
	range_tree_vacate(vd->vdev_obsolete_segments, NULL, NULL);
}

int
spa_condense_init(spa_t *spa)
{
	int error = zap_lookup(spa->spa_meta_objset,
	    DMU_POOL_DIRECTORY_OBJECT,
	    DMU_POOL_CONDENSING_INDIRECT, sizeof (uint64_t),
	    sizeof (spa->spa_condensing_indirect_phys) / sizeof (uint64_t),
	    &spa->spa_condensing_indirect_phys);
	if (error == 0) {
		if (spa_writeable(spa)) {
			spa->spa_condensing_indirect =
			    spa_condensing_indirect_create(spa);
		}
		return (0);
	} else if (error == ENOENT) {
		return (0);
	} else {
		return (error);
	}
}

void
spa_condense_fini(spa_t *spa)
{
	if (spa->spa_condensing_indirect != NULL) {
		spa_condensing_indirect_destroy(spa->spa_condensing_indirect);
		spa->spa_condensing_indirect = NULL;
	}
}

void
spa_start_indirect_condensing_thread(spa_t *spa)
{
	ASSERT3P(spa->spa_condense_zthr, ==, NULL);
	spa->spa_condense_zthr = zthr_create(spa_condense_indirect_thread_check,
	    spa_condense_indirect_thread, spa);
}

/*
 * Gets the obsolete spacemap object from the vdev's ZAP.
 * Returns the spacemap object, or 0 if it wasn't in the ZAP or the ZAP doesn't
 * exist yet.
 */
int
vdev_obsolete_sm_object(vdev_t *vd)
{
	ASSERT0(spa_config_held(vd->vdev_spa, SCL_ALL, RW_WRITER));
	if (vd->vdev_top_zap == 0) {
		return (0);
	}

	uint64_t sm_obj = 0;
	int err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_top_zap,
	    VDEV_TOP_ZAP_INDIRECT_OBSOLETE_SM, sizeof (sm_obj), 1, &sm_obj);

	ASSERT(err == 0 || err == ENOENT);

	return (sm_obj);
}

boolean_t
vdev_obsolete_counts_are_precise(vdev_t *vd)
{
	ASSERT0(spa_config_held(vd->vdev_spa, SCL_ALL, RW_WRITER));
	if (vd->vdev_top_zap == 0) {
		return (B_FALSE);
	}

	uint64_t val = 0;
	int err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_top_zap,
	    VDEV_TOP_ZAP_OBSOLETE_COUNTS_ARE_PRECISE, sizeof (val), 1, &val);

	ASSERT(err == 0 || err == ENOENT);

	return (val != 0);
}

/* ARGSUSED */
static void
vdev_indirect_close(vdev_t *vd)
{
}

/* ARGSUSED */
static int
vdev_indirect_open(vdev_t *vd, uint64_t *psize, uint64_t *max_psize,
    uint64_t *ashift)
{
	*psize = *max_psize = vd->vdev_asize +
	    VDEV_LABEL_START_SIZE + VDEV_LABEL_END_SIZE;
	*ashift = vd->vdev_ashift;
	return (0);
}

typedef struct remap_segment {
	vdev_t *rs_vd;
	uint64_t rs_offset;
	uint64_t rs_asize;
	uint64_t rs_split_offset;
	list_node_t rs_node;
} remap_segment_t;

remap_segment_t *
rs_alloc(vdev_t *vd, uint64_t offset, uint64_t asize, uint64_t split_offset)
{
	remap_segment_t *rs = kmem_alloc(sizeof (remap_segment_t), KM_SLEEP);
	rs->rs_vd = vd;
	rs->rs_offset = offset;
	rs->rs_asize = asize;
	rs->rs_split_offset = split_offset;
	return (rs);
}

/*
 * Given an indirect vdev and an extent on that vdev, it duplicates the
 * physical entries of the indirect mapping that correspond to the extent
 * to a new array and returns a pointer to it. In addition, copied_entries
 * is populated with the number of mapping entries that were duplicated.
 *
 * Note that the function assumes that the caller holds vdev_indirect_rwlock.
 * This ensures that the mapping won't change due to condensing as we
 * copy over its contents.
 *
 * Finally, since we are doing an allocation, it is up to the caller to
 * free the array allocated in this function.
 */
vdev_indirect_mapping_entry_phys_t *
vdev_indirect_mapping_duplicate_adjacent_entries(vdev_t *vd, uint64_t offset,
    uint64_t asize, uint64_t *copied_entries)
{
	vdev_indirect_mapping_entry_phys_t *duplicate_mappings = NULL;
	vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
	uint64_t entries = 0;

	ASSERT(RW_READ_HELD(&vd->vdev_indirect_rwlock));

	vdev_indirect_mapping_entry_phys_t *first_mapping =
	    vdev_indirect_mapping_entry_for_offset(vim, offset);
	ASSERT3P(first_mapping, !=, NULL);

	vdev_indirect_mapping_entry_phys_t *m = first_mapping;
	while (asize > 0) {
		uint64_t size = DVA_GET_ASIZE(&m->vimep_dst);

		ASSERT3U(offset, >=, DVA_MAPPING_GET_SRC_OFFSET(m));
		ASSERT3U(offset, <, DVA_MAPPING_GET_SRC_OFFSET(m) + size);

		uint64_t inner_offset = offset - DVA_MAPPING_GET_SRC_OFFSET(m);
		uint64_t inner_size = MIN(asize, size - inner_offset);

		offset += inner_size;
		asize -= inner_size;
		entries++;
		m++;
	}

	size_t copy_length = entries * sizeof (*first_mapping);
	duplicate_mappings = kmem_alloc(copy_length, KM_SLEEP);
	bcopy(first_mapping, duplicate_mappings, copy_length);
	*copied_entries = entries;

	return (duplicate_mappings);
}

/*
 * Goes through the relevant indirect mappings until it hits a concrete vdev
 * and issues the callback. On the way to the concrete vdev, if any other
 * indirect vdevs are encountered, then the callback will also be called on
 * each of those indirect vdevs. For example, if the segment is mapped to
 * segment A on indirect vdev 1, and then segment A on indirect vdev 1 is
 * mapped to segment B on concrete vdev 2, then the callback will be called on
 * both vdev 1 and vdev 2.
 *
 * While the callback passed to vdev_indirect_remap() is called on every vdev
 * the function encounters, certain callbacks only care about concrete vdevs.
 * These types of callbacks should return immediately and explicitly when they
 * are called on an indirect vdev.
 *
 * Because there is a possibility that a DVA section in the indirect device
 * has been split into multiple sections in our mapping, we keep track
 * of the relevant contiguous segments of the new location (remap_segment_t)
 * in a stack. This way we can call the callback for each of the new sections
 * created by a single section of the indirect device. Note though, that in
 * this scenario the callbacks in each split block won't occur in-order in
 * terms of offset, so callers should not make any assumptions about that.
 *
 * For callbacks that don't handle split blocks and immediately return when
 * they encounter them (as is the case for remap_blkptr_cb), the caller can
 * assume that its callback will be applied from the first indirect vdev
 * encountered to the last one and then the concrete vdev, in that order.
 */
static void
vdev_indirect_remap(vdev_t *vd, uint64_t offset, uint64_t asize,
    void (*func)(uint64_t, vdev_t *, uint64_t, uint64_t, void *), void *arg)
{
	list_t stack;
	spa_t *spa = vd->vdev_spa;

	list_create(&stack, sizeof (remap_segment_t),
	    offsetof(remap_segment_t, rs_node));

	for (remap_segment_t *rs = rs_alloc(vd, offset, asize, 0);
	    rs != NULL; rs = list_remove_head(&stack)) {
		vdev_t *v = rs->rs_vd;
		uint64_t num_entries = 0;

		ASSERT(spa_config_held(spa, SCL_ALL, RW_READER) != 0);
		ASSERT(rs->rs_asize > 0);

		/*
		 * Note: As this function can be called from open context
		 * (e.g. zio_read()), we need the following rwlock to
		 * prevent the mapping from being changed by condensing.
		 *
		 * So we grab the lock and we make a copy of the entries
		 * that are relevant to the extent that we are working on.
		 * Once that is done, we drop the lock and iterate over
		 * our copy of the mapping. Once we are done with the with
		 * the remap segment and we free it, we also free our copy
		 * of the indirect mapping entries that are relevant to it.
		 *
		 * This way we don't need to wait until the function is
		 * finished with a segment, to condense it. In addition, we
		 * don't need a recursive rwlock for the case that a call to
		 * vdev_indirect_remap() needs to call itself (through the
		 * codepath of its callback) for the same vdev in the middle
		 * of its execution.
		 */
		rw_enter(&v->vdev_indirect_rwlock, RW_READER);
		vdev_indirect_mapping_t *vim = v->vdev_indirect_mapping;
		ASSERT3P(vim, !=, NULL);

		vdev_indirect_mapping_entry_phys_t *mapping =
		    vdev_indirect_mapping_duplicate_adjacent_entries(v,
		    rs->rs_offset, rs->rs_asize, &num_entries);
		ASSERT3P(mapping, !=, NULL);
		ASSERT3U(num_entries, >, 0);
		rw_exit(&v->vdev_indirect_rwlock);

		for (uint64_t i = 0; i < num_entries; i++) {
			/*
			 * Note: the vdev_indirect_mapping can not change
			 * while we are running.  It only changes while the
			 * removal is in progress, and then only from syncing
			 * context. While a removal is in progress, this
			 * function is only called for frees, which also only
			 * happen from syncing context.
			 */
			vdev_indirect_mapping_entry_phys_t *m = &mapping[i];

			ASSERT3P(m, !=, NULL);
			ASSERT3U(rs->rs_asize, >, 0);

			uint64_t size = DVA_GET_ASIZE(&m->vimep_dst);
			uint64_t dst_offset = DVA_GET_OFFSET(&m->vimep_dst);
			uint64_t dst_vdev = DVA_GET_VDEV(&m->vimep_dst);

			ASSERT3U(rs->rs_offset, >=,
			    DVA_MAPPING_GET_SRC_OFFSET(m));
			ASSERT3U(rs->rs_offset, <,
			    DVA_MAPPING_GET_SRC_OFFSET(m) + size);
			ASSERT3U(dst_vdev, !=, v->vdev_id);

			uint64_t inner_offset = rs->rs_offset -
			    DVA_MAPPING_GET_SRC_OFFSET(m);
			uint64_t inner_size =
			    MIN(rs->rs_asize, size - inner_offset);

			vdev_t *dst_v = vdev_lookup_top(spa, dst_vdev);
			ASSERT3P(dst_v, !=, NULL);

			if (dst_v->vdev_ops == &vdev_indirect_ops) {
				list_insert_head(&stack,
				    rs_alloc(dst_v, dst_offset + inner_offset,
				    inner_size, rs->rs_split_offset));

			}

			if ((zfs_flags & ZFS_DEBUG_INDIRECT_REMAP) &&
			    IS_P2ALIGNED(inner_size, 2 * SPA_MINBLOCKSIZE)) {
				/*
				 * Note: This clause exists only solely for
				 * testing purposes. We use it to ensure that
				 * split blocks work and that the callbacks
				 * using them yield the same result if issued
				 * in reverse order.
				 */
				uint64_t inner_half = inner_size / 2;

				func(rs->rs_split_offset + inner_half, dst_v,
				    dst_offset + inner_offset + inner_half,
				    inner_half, arg);

				func(rs->rs_split_offset, dst_v,
				    dst_offset + inner_offset,
				    inner_half, arg);
			} else {
				func(rs->rs_split_offset, dst_v,
				    dst_offset + inner_offset,
				    inner_size, arg);
			}

			rs->rs_offset += inner_size;
			rs->rs_asize -= inner_size;
			rs->rs_split_offset += inner_size;
		}
		VERIFY0(rs->rs_asize);

		kmem_free(mapping, num_entries * sizeof (*mapping));
		kmem_free(rs, sizeof (remap_segment_t));
	}
	list_destroy(&stack);
}

static void
vdev_indirect_child_io_done(zio_t *zio)
{
	zio_t *pio = zio->io_private;

	mutex_enter(&pio->io_lock);
	pio->io_error = zio_worst_error(pio->io_error, zio->io_error);
	mutex_exit(&pio->io_lock);

	abd_put(zio->io_abd);
}

/*
 * This is a callback for vdev_indirect_remap() which allocates an
 * indirect_split_t for each split segment and adds it to iv_splits.
 */
static void
vdev_indirect_gather_splits(uint64_t split_offset, vdev_t *vd, uint64_t offset,
    uint64_t size, void *arg)
{
	zio_t *zio = arg;
	indirect_vsd_t *iv = zio->io_vsd;

	ASSERT3P(vd, !=, NULL);

	if (vd->vdev_ops == &vdev_indirect_ops)
		return;

	int n = 1;
	if (vd->vdev_ops == &vdev_mirror_ops)
		n = vd->vdev_children;

	indirect_split_t *is =
	    kmem_zalloc(offsetof(indirect_split_t, is_child[n]), KM_SLEEP);

	is->is_children = n;
	is->is_size = size;
	is->is_split_offset = split_offset;
	is->is_target_offset = offset;
	is->is_vdev = vd;
	list_create(&is->is_unique_child, sizeof (indirect_child_t),
	    offsetof(indirect_child_t, ic_node));

	/*
	 * Note that we only consider multiple copies of the data for
	 * *mirror* vdevs.  We don't for "replacing" or "spare" vdevs, even
	 * though they use the same ops as mirror, because there's only one
	 * "good" copy under the replacing/spare.
	 */
	if (vd->vdev_ops == &vdev_mirror_ops) {
		for (int i = 0; i < n; i++) {
			is->is_child[i].ic_vdev = vd->vdev_child[i];
			list_link_init(&is->is_child[i].ic_node);
		}
	} else {
		is->is_child[0].ic_vdev = vd;
	}

	list_insert_tail(&iv->iv_splits, is);
}

static void
vdev_indirect_read_split_done(zio_t *zio)
{
	indirect_child_t *ic = zio->io_private;

	if (zio->io_error != 0) {
		/*
		 * Clear ic_data to indicate that we do not have data for this
		 * child.
		 */
		abd_free(ic->ic_data);
		ic->ic_data = NULL;
	}
}

/*
 * Issue reads for all copies (mirror children) of all splits.
 */
static void
vdev_indirect_read_all(zio_t *zio)
{
	indirect_vsd_t *iv = zio->io_vsd;

	ASSERT3U(zio->io_type, ==, ZIO_TYPE_READ);

	for (indirect_split_t *is = list_head(&iv->iv_splits);
	    is != NULL; is = list_next(&iv->iv_splits, is)) {
		for (int i = 0; i < is->is_children; i++) {
			indirect_child_t *ic = &is->is_child[i];

			if (!vdev_readable(ic->ic_vdev))
				continue;

			/*
			 * Note, we may read from a child whose DTL
			 * indicates that the data may not be present here.
			 * While this might result in a few i/os that will
			 * likely return incorrect data, it simplifies the
			 * code since we can treat scrub and resilver
			 * identically.  (The incorrect data will be
			 * detected and ignored when we verify the
			 * checksum.)
			 */

			ic->ic_data = abd_alloc_sametype(zio->io_abd,
			    is->is_size);
			ic->ic_duplicate = NULL;

			zio_nowait(zio_vdev_child_io(zio, NULL,
			    ic->ic_vdev, is->is_target_offset, ic->ic_data,
			    is->is_size, zio->io_type, zio->io_priority, 0,
			    vdev_indirect_read_split_done, ic));
		}
	}
	iv->iv_reconstruct = B_TRUE;
}

static void
vdev_indirect_io_start(zio_t *zio)
{
	spa_t *spa = zio->io_spa;
	indirect_vsd_t *iv = kmem_zalloc(sizeof (*iv), KM_SLEEP);
	list_create(&iv->iv_splits,
	    sizeof (indirect_split_t), offsetof(indirect_split_t, is_node));

	zio->io_vsd = iv;
	zio->io_vsd_ops = &vdev_indirect_vsd_ops;

	ASSERT(spa_config_held(spa, SCL_ALL, RW_READER) != 0);
	if (zio->io_type != ZIO_TYPE_READ) {
		ASSERT3U(zio->io_type, ==, ZIO_TYPE_WRITE);
		/*
		 * Note: this code can handle other kinds of writes,
		 * but we don't expect them.
		 */
		ASSERT((zio->io_flags & (ZIO_FLAG_SELF_HEAL |
		    ZIO_FLAG_RESILVER | ZIO_FLAG_INDUCE_DAMAGE)) != 0);
	}

	vdev_indirect_remap(zio->io_vd, zio->io_offset, zio->io_size,
	    vdev_indirect_gather_splits, zio);

	indirect_split_t *first = list_head(&iv->iv_splits);
	if (first->is_size == zio->io_size) {
		/*
		 * This is not a split block; we are pointing to the entire
		 * data, which will checksum the same as the original data.
		 * Pass the BP down so that the child i/o can verify the
		 * checksum, and try a different location if available
		 * (e.g. on a mirror).
		 *
		 * While this special case could be handled the same as the
		 * general (split block) case, doing it this way ensures
		 * that the vast majority of blocks on indirect vdevs
		 * (which are not split) are handled identically to blocks
		 * on non-indirect vdevs.  This allows us to be less strict
		 * about performance in the general (but rare) case.
		 */
		ASSERT0(first->is_split_offset);
		ASSERT3P(list_next(&iv->iv_splits, first), ==, NULL);
		zio_nowait(zio_vdev_child_io(zio, zio->io_bp,
		    first->is_vdev, first->is_target_offset,
		    abd_get_offset(zio->io_abd, 0),
		    zio->io_size, zio->io_type, zio->io_priority, 0,
		    vdev_indirect_child_io_done, zio));
	} else {
		iv->iv_split_block = B_TRUE;
		if (zio->io_type == ZIO_TYPE_READ &&
		    zio->io_flags & (ZIO_FLAG_SCRUB | ZIO_FLAG_RESILVER)) {
			/*
			 * Read all copies.  Note that for simplicity,
			 * we don't bother consulting the DTL in the
			 * resilver case.
			 */
			vdev_indirect_read_all(zio);
		} else {
			/*
			 * If this is a read zio, we read one copy of each
			 * split segment, from the top-level vdev.  Since
			 * we don't know the checksum of each split
			 * individually, the child zio can't ensure that
			 * we get the right data. E.g. if it's a mirror,
			 * it will just read from a random (healthy) leaf
			 * vdev. We have to verify the checksum in
			 * vdev_indirect_io_done().
			 *
			 * For write zios, the vdev code will ensure we write
			 * to all children.
			 */
			for (indirect_split_t *is = list_head(&iv->iv_splits);
			    is != NULL; is = list_next(&iv->iv_splits, is)) {
				zio_nowait(zio_vdev_child_io(zio, NULL,
				    is->is_vdev, is->is_target_offset,
				    abd_get_offset(zio->io_abd,
				    is->is_split_offset),
				    is->is_size, zio->io_type,
				    zio->io_priority, 0,
				    vdev_indirect_child_io_done, zio));
			}
		}
	}

	zio_execute(zio);
}

/*
 * Report a checksum error for a child.
 */
static void
vdev_indirect_checksum_error(zio_t *zio,
    indirect_split_t *is, indirect_child_t *ic)
{
	vdev_t *vd = ic->ic_vdev;

	if (zio->io_flags & ZIO_FLAG_SPECULATIVE)
		return;

	mutex_enter(&vd->vdev_stat_lock);
	vd->vdev_stat.vs_checksum_errors++;
	mutex_exit(&vd->vdev_stat_lock);

	zio_bad_cksum_t zbc = { 0 };
	void *bad_buf = abd_borrow_buf_copy(ic->ic_data, is->is_size);
	abd_t *good_abd = is->is_good_child->ic_data;
	void *good_buf = abd_borrow_buf_copy(good_abd, is->is_size);
	zfs_ereport_post_checksum(zio->io_spa, vd, &zio->io_bookmark, zio,
	    is->is_target_offset, is->is_size, good_buf, bad_buf, &zbc);
	abd_return_buf(ic->ic_data, bad_buf, is->is_size);
	abd_return_buf(good_abd, good_buf, is->is_size);
}

/*
 * Issue repair i/os for any incorrect copies.  We do this by comparing
 * each split segment's correct data (is_good_child's ic_data) with each
 * other copy of the data.  If they differ, then we overwrite the bad data
 * with the good copy.  Note that we do this without regard for the DTL's,
 * which simplifies this code and also issues the optimal number of writes
 * (based on which copies actually read bad data, as opposed to which we
 * think might be wrong).  For the same reason, we always use
 * ZIO_FLAG_SELF_HEAL, to bypass the DTL check in zio_vdev_io_start().
 */
static void
vdev_indirect_repair(zio_t *zio)
{
	indirect_vsd_t *iv = zio->io_vsd;

	enum zio_flag flags = ZIO_FLAG_IO_REPAIR;

	if (!(zio->io_flags & (ZIO_FLAG_SCRUB | ZIO_FLAG_RESILVER)))
		flags |= ZIO_FLAG_SELF_HEAL;

	if (!spa_writeable(zio->io_spa))
		return;

	for (indirect_split_t *is = list_head(&iv->iv_splits);
	    is != NULL; is = list_next(&iv->iv_splits, is)) {
		for (int c = 0; c < is->is_children; c++) {
			indirect_child_t *ic = &is->is_child[c];
			if (ic == is->is_good_child)
				continue;
			if (ic->ic_data == NULL)
				continue;
			if (ic->ic_duplicate == is->is_good_child)
				continue;

			zio_nowait(zio_vdev_child_io(zio, NULL,
			    ic->ic_vdev, is->is_target_offset,
			    is->is_good_child->ic_data, is->is_size,
			    ZIO_TYPE_WRITE, ZIO_PRIORITY_ASYNC_WRITE,
			    ZIO_FLAG_IO_REPAIR | ZIO_FLAG_SELF_HEAL,
			    NULL, NULL));

			vdev_indirect_checksum_error(zio, is, ic);
		}
	}
}

/*
 * Report checksum errors on all children that we read from.
 */
static void
vdev_indirect_all_checksum_errors(zio_t *zio)
{
	indirect_vsd_t *iv = zio->io_vsd;

	if (zio->io_flags & ZIO_FLAG_SPECULATIVE)
		return;

	for (indirect_split_t *is = list_head(&iv->iv_splits);
	    is != NULL; is = list_next(&iv->iv_splits, is)) {
		for (int c = 0; c < is->is_children; c++) {
			indirect_child_t *ic = &is->is_child[c];

			if (ic->ic_data == NULL)
				continue;

			vdev_t *vd = ic->ic_vdev;

			mutex_enter(&vd->vdev_stat_lock);
			vd->vdev_stat.vs_checksum_errors++;
			mutex_exit(&vd->vdev_stat_lock);

			zfs_ereport_post_checksum(zio->io_spa, vd,
			    &zio->io_bookmark, zio, is->is_target_offset,
			    is->is_size, NULL, NULL, NULL);
		}
	}
}

/*
 * Copy data from all the splits to a main zio then validate the checksum.
 * If then checksum is successfully validated return success.
 */
static int
vdev_indirect_splits_checksum_validate(indirect_vsd_t *iv, zio_t *zio)
{
	zio_bad_cksum_t zbc;

	for (indirect_split_t *is = list_head(&iv->iv_splits);
	    is != NULL; is = list_next(&iv->iv_splits, is)) {

		ASSERT3P(is->is_good_child->ic_data, !=, NULL);
		ASSERT3P(is->is_good_child->ic_duplicate, ==, NULL);

		abd_copy_off(zio->io_abd, is->is_good_child->ic_data,
		    is->is_split_offset, 0, is->is_size);
	}

	return (zio_checksum_error(zio, &zbc));
}

/*
 * There are relatively few possible combinations making it feasible to
 * deterministically check them all.  We do this by setting the good_child
 * to the next unique split version.  If we reach the end of the list then
 * "carry over" to the next unique split version (like counting in base
 * is_unique_children, but each digit can have a different base).
 */
static int
vdev_indirect_splits_enumerate_all(indirect_vsd_t *iv, zio_t *zio)
{
	boolean_t more = B_TRUE;

	iv->iv_attempts = 0;

	for (indirect_split_t *is = list_head(&iv->iv_splits);
	    is != NULL; is = list_next(&iv->iv_splits, is))
		is->is_good_child = list_head(&is->is_unique_child);

	while (more == B_TRUE) {
		iv->iv_attempts++;
		more = B_FALSE;

		if (vdev_indirect_splits_checksum_validate(iv, zio) == 0)
			return (0);

		for (indirect_split_t *is = list_head(&iv->iv_splits);
		    is != NULL; is = list_next(&iv->iv_splits, is)) {
			is->is_good_child = list_next(&is->is_unique_child,
			    is->is_good_child);
			if (is->is_good_child != NULL) {
				more = B_TRUE;
				break;
			}

			is->is_good_child = list_head(&is->is_unique_child);
		}
	}

	ASSERT3S(iv->iv_attempts, <=, iv->iv_unique_combinations);

	return (SET_ERROR(ECKSUM));
}

/*
 * There are too many combinations to try all of them in a reasonable amount
 * of time.  So try a fixed number of random combinations from the unique
 * split versions, after which we'll consider the block unrecoverable.
 */
static int
vdev_indirect_splits_enumerate_randomly(indirect_vsd_t *iv, zio_t *zio)
{
	iv->iv_attempts = 0;

	while (iv->iv_attempts < iv->iv_attempts_max) {
		iv->iv_attempts++;

		for (indirect_split_t *is = list_head(&iv->iv_splits);
		    is != NULL; is = list_next(&iv->iv_splits, is)) {
			indirect_child_t *ic = list_head(&is->is_unique_child);
			int children = is->is_unique_children;

			for (int i = spa_get_random(children); i > 0; i--)
				ic = list_next(&is->is_unique_child, ic);

			ASSERT3P(ic, !=, NULL);
			is->is_good_child = ic;
		}

		if (vdev_indirect_splits_checksum_validate(iv, zio) == 0)
			return (0);
	}

	return (SET_ERROR(ECKSUM));
}

/*
 * This is a validation function for reconstruction.  It randomly selects
 * a good combination, if one can be found, and then it intentionally
 * damages all other segment copes by zeroing them.  This forces the
 * reconstruction algorithm to locate the one remaining known good copy.
 */
static int
vdev_indirect_splits_damage(indirect_vsd_t *iv, zio_t *zio)
{
	/* Presume all the copies are unique for initial selection. */
	for (indirect_split_t *is = list_head(&iv->iv_splits);
	    is != NULL; is = list_next(&iv->iv_splits, is)) {
		is->is_unique_children = 0;

		for (int i = 0; i < is->is_children; i++) {
			indirect_child_t *ic = &is->is_child[i];
			if (ic->ic_data != NULL) {
				is->is_unique_children++;
				list_insert_tail(&is->is_unique_child, ic);
			}
		}
	}

	/*
	 * Set each is_good_child to a randomly-selected child which
	 * is known to contain validated data.
	 */
	int error = vdev_indirect_splits_enumerate_randomly(iv, zio);
	if (error)
		goto out;

	/*
	 * Damage all but the known good copy by zeroing it.  This will
	 * result in two or less unique copies per indirect_child_t.
	 * Both may need to be checked in order to reconstruct the block.
	 * Set iv->iv_attempts_max such that all unique combinations will
	 * enumerated, but limit the damage to at most 16 indirect splits.
	 */
	iv->iv_attempts_max = 1;

	for (indirect_split_t *is = list_head(&iv->iv_splits);
	    is != NULL; is = list_next(&iv->iv_splits, is)) {
		for (int c = 0; c < is->is_children; c++) {
			indirect_child_t *ic = &is->is_child[c];

			if (ic == is->is_good_child)
				continue;
			if (ic->ic_data == NULL)
				continue;

			abd_zero(ic->ic_data, ic->ic_data->abd_size);
		}

		iv->iv_attempts_max *= 2;
		if (iv->iv_attempts_max > (1ULL << 16)) {
			iv->iv_attempts_max = UINT64_MAX;
			break;
		}
	}

out:
	/* Empty the unique children lists so they can be reconstructed. */
	for (indirect_split_t *is = list_head(&iv->iv_splits);
	    is != NULL; is = list_next(&iv->iv_splits, is)) {
		indirect_child_t *ic;
		while ((ic = list_head(&is->is_unique_child)) != NULL)
			list_remove(&is->is_unique_child, ic);

		is->is_unique_children = 0;
	}

	return (error);
}

/*
 * This function is called when we have read all copies of the data and need
 * to try to find a combination of copies that gives us the right checksum.
 *
 * If we pointed to any mirror vdevs, this effectively does the job of the
 * mirror.  The mirror vdev code can't do its own job because we don't know
 * the checksum of each split segment individually.
 *
 * We have to try every unique combination of copies of split segments, until
 * we find one that checksums correctly.  Duplicate segment copies are first
 * identified and latter skipped during reconstruction.  This optimization
 * reduces the search space and ensures that of the remaining combinations
 * at most one is correct.
 *
 * When the total number of combinations is small they can all be checked.
 * For example, if we have 3 segments in the split, and each points to a
 * 2-way mirror with unique copies, we will have the following pieces of data:
 *
 *       |     mirror child
 * split |     [0]        [1]
 * ======|=====================
 *   A   |  data_A_0   data_A_1
 *   B   |  data_B_0   data_B_1
 *   C   |  data_C_0   data_C_1
 *
 * We will try the following (mirror children)^(number of splits) (2^3=8)
 * combinations, which is similar to bitwise-little-endian counting in
 * binary.  In general each "digit" corresponds to a split segment, and the
 * base of each digit is is_children, which can be different for each
 * digit.
 *
 * "low bit"        "high bit"
 *        v                 v
 * data_A_0 data_B_0 data_C_0
 * data_A_1 data_B_0 data_C_0
 * data_A_0 data_B_1 data_C_0
 * data_A_1 data_B_1 data_C_0
 * data_A_0 data_B_0 data_C_1
 * data_A_1 data_B_0 data_C_1
 * data_A_0 data_B_1 data_C_1
 * data_A_1 data_B_1 data_C_1
 *
 * Note that the split segments may be on the same or different top-level
 * vdevs. In either case, we may need to try lots of combinations (see
 * zfs_reconstruct_indirect_combinations_max).  This ensures that if a mirror
 * has small silent errors on all of its children, we can still reconstruct
 * the correct data, as long as those errors are at sufficiently-separated
 * offsets (specifically, separated by the largest block size - default of
 * 128KB, but up to 16MB).
 */
static void
vdev_indirect_reconstruct_io_done(zio_t *zio)
{
	indirect_vsd_t *iv = zio->io_vsd;
	boolean_t known_good = B_FALSE;
	int error;

	iv->iv_unique_combinations = 1;
	iv->iv_attempts_max = UINT64_MAX;

	if (zfs_reconstruct_indirect_combinations_max > 0)
		iv->iv_attempts_max = zfs_reconstruct_indirect_combinations_max;

	/*
	 * If nonzero, every 1/x blocks will be damaged, in order to validate
	 * reconstruction when there are split segments with damaged copies.
	 * Known_good will TRUE when reconstruction is known to be possible.
	 */
	if (zfs_reconstruct_indirect_damage_fraction != 0 &&
	    spa_get_random(zfs_reconstruct_indirect_damage_fraction) == 0)
		known_good = (vdev_indirect_splits_damage(iv, zio) == 0);

	/*
	 * Determine the unique children for a split segment and add them
	 * to the is_unique_child list.  By restricting reconstruction
	 * to these children, only unique combinations will be considered.
	 * This can vastly reduce the search space when there are a large
	 * number of indirect splits.
	 */
	for (indirect_split_t *is = list_head(&iv->iv_splits);
	    is != NULL; is = list_next(&iv->iv_splits, is)) {
		is->is_unique_children = 0;

		for (int i = 0; i < is->is_children; i++) {
			indirect_child_t *ic_i = &is->is_child[i];

			if (ic_i->ic_data == NULL ||
			    ic_i->ic_duplicate != NULL)
				continue;

			for (int j = i + 1; j < is->is_children; j++) {
				indirect_child_t *ic_j = &is->is_child[j];

				if (ic_j->ic_data == NULL ||
				    ic_j->ic_duplicate != NULL)
					continue;

				if (abd_cmp(ic_i->ic_data, ic_j->ic_data,
				    is->is_size) == 0) {
					ic_j->ic_duplicate = ic_i;
				}
			}

			is->is_unique_children++;
			list_insert_tail(&is->is_unique_child, ic_i);
		}

		/* Reconstruction is impossible, no valid children */
		EQUIV(list_is_empty(&is->is_unique_child),
		    is->is_unique_children == 0);
		if (list_is_empty(&is->is_unique_child)) {
			zio->io_error = EIO;
			vdev_indirect_all_checksum_errors(zio);
			zio_checksum_verified(zio);
			return;
		}

		iv->iv_unique_combinations *= is->is_unique_children;
	}

	if (iv->iv_unique_combinations <= iv->iv_attempts_max)
		error = vdev_indirect_splits_enumerate_all(iv, zio);
	else
		error = vdev_indirect_splits_enumerate_randomly(iv, zio);

	if (error != 0) {
		/* All attempted combinations failed. */
		ASSERT3B(known_good, ==, B_FALSE);
		zio->io_error = error;
		vdev_indirect_all_checksum_errors(zio);
	} else {
		/*
		 * The checksum has been successfully validated.  Issue
		 * repair I/Os to any copies of splits which don't match
		 * the validated version.
		 */
		ASSERT0(vdev_indirect_splits_checksum_validate(iv, zio));
		vdev_indirect_repair(zio);
		zio_checksum_verified(zio);
	}
}

static void
vdev_indirect_io_done(zio_t *zio)
{
	indirect_vsd_t *iv = zio->io_vsd;

	if (iv->iv_reconstruct) {
		/*
		 * We have read all copies of the data (e.g. from mirrors),
		 * either because this was a scrub/resilver, or because the
		 * one-copy read didn't checksum correctly.
		 */
		vdev_indirect_reconstruct_io_done(zio);
		return;
	}

	if (!iv->iv_split_block) {
		/*
		 * This was not a split block, so we passed the BP down,
		 * and the checksum was handled by the (one) child zio.
		 */
		return;
	}

	zio_bad_cksum_t zbc;
	int ret = zio_checksum_error(zio, &zbc);
	if (ret == 0) {
		zio_checksum_verified(zio);
		return;
	}

	/*
	 * The checksum didn't match.  Read all copies of all splits, and
	 * then we will try to reconstruct.  The next time
	 * vdev_indirect_io_done() is called, iv_reconstruct will be set.
	 */
	vdev_indirect_read_all(zio);

	zio_vdev_io_redone(zio);
}

vdev_ops_t vdev_indirect_ops = {
	.vdev_op_open = vdev_indirect_open,
	.vdev_op_close = vdev_indirect_close,
	.vdev_op_asize = vdev_default_asize,
	.vdev_op_io_start = vdev_indirect_io_start,
	.vdev_op_io_done = vdev_indirect_io_done,
	.vdev_op_state_change = NULL,
	.vdev_op_need_resilver = NULL,
	.vdev_op_hold = NULL,
	.vdev_op_rele = NULL,
	.vdev_op_remap = vdev_indirect_remap,
	.vdev_op_xlate = NULL,
	.vdev_op_type = VDEV_TYPE_INDIRECT,	/* name of this vdev type */
	.vdev_op_leaf = B_FALSE			/* leaf vdev */
};