1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_DMU_H 27 #define _SYS_DMU_H 28 29 /* 30 * This file describes the interface that the DMU provides for its 31 * consumers. 32 * 33 * The DMU also interacts with the SPA. That interface is described in 34 * dmu_spa.h. 35 */ 36 37 #include <sys/inttypes.h> 38 #include <sys/types.h> 39 #include <sys/param.h> 40 #include <sys/cred.h> 41 42 #ifdef __cplusplus 43 extern "C" { 44 #endif 45 46 struct uio; 47 struct page; 48 struct vnode; 49 struct spa; 50 struct zilog; 51 struct zio; 52 struct blkptr; 53 struct zap_cursor; 54 struct dsl_dataset; 55 struct dsl_pool; 56 struct dnode; 57 struct drr_begin; 58 struct drr_end; 59 struct zbookmark; 60 struct spa; 61 struct nvlist; 62 struct arc_buf; 63 64 typedef struct objset objset_t; 65 typedef struct dmu_tx dmu_tx_t; 66 typedef struct dsl_dir dsl_dir_t; 67 68 typedef enum dmu_object_type { 69 DMU_OT_NONE, 70 /* general: */ 71 DMU_OT_OBJECT_DIRECTORY, /* ZAP */ 72 DMU_OT_OBJECT_ARRAY, /* UINT64 */ 73 DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ 74 DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ 75 DMU_OT_BPLIST, /* UINT64 */ 76 DMU_OT_BPLIST_HDR, /* UINT64 */ 77 /* spa: */ 78 DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ 79 DMU_OT_SPACE_MAP, /* UINT64 */ 80 /* zil: */ 81 DMU_OT_INTENT_LOG, /* UINT64 */ 82 /* dmu: */ 83 DMU_OT_DNODE, /* DNODE */ 84 DMU_OT_OBJSET, /* OBJSET */ 85 /* dsl: */ 86 DMU_OT_DSL_DIR, /* UINT64 */ 87 DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ 88 DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ 89 DMU_OT_DSL_PROPS, /* ZAP */ 90 DMU_OT_DSL_DATASET, /* UINT64 */ 91 /* zpl: */ 92 DMU_OT_ZNODE, /* ZNODE */ 93 DMU_OT_OLDACL, /* Old ACL */ 94 DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ 95 DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ 96 DMU_OT_MASTER_NODE, /* ZAP */ 97 DMU_OT_UNLINKED_SET, /* ZAP */ 98 /* zvol: */ 99 DMU_OT_ZVOL, /* UINT8 */ 100 DMU_OT_ZVOL_PROP, /* ZAP */ 101 /* other; for testing only! */ 102 DMU_OT_PLAIN_OTHER, /* UINT8 */ 103 DMU_OT_UINT64_OTHER, /* UINT64 */ 104 DMU_OT_ZAP_OTHER, /* ZAP */ 105 /* new object types: */ 106 DMU_OT_ERROR_LOG, /* ZAP */ 107 DMU_OT_SPA_HISTORY, /* UINT8 */ 108 DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */ 109 DMU_OT_POOL_PROPS, /* ZAP */ 110 DMU_OT_DSL_PERMS, /* ZAP */ 111 DMU_OT_ACL, /* ACL */ 112 DMU_OT_SYSACL, /* SYSACL */ 113 DMU_OT_FUID, /* FUID table (Packed NVLIST UINT8) */ 114 DMU_OT_FUID_SIZE, /* FUID table size UINT64 */ 115 DMU_OT_NEXT_CLONES, /* ZAP */ 116 DMU_OT_SCRUB_QUEUE, /* ZAP */ 117 DMU_OT_USERGROUP_USED, /* ZAP */ 118 DMU_OT_USERGROUP_QUOTA, /* ZAP */ 119 DMU_OT_USERREFS, /* ZAP */ 120 DMU_OT_NUMTYPES 121 } dmu_object_type_t; 122 123 typedef enum dmu_objset_type { 124 DMU_OST_NONE, 125 DMU_OST_META, 126 DMU_OST_ZFS, 127 DMU_OST_ZVOL, 128 DMU_OST_OTHER, /* For testing only! */ 129 DMU_OST_ANY, /* Be careful! */ 130 DMU_OST_NUMTYPES 131 } dmu_objset_type_t; 132 133 void byteswap_uint64_array(void *buf, size_t size); 134 void byteswap_uint32_array(void *buf, size_t size); 135 void byteswap_uint16_array(void *buf, size_t size); 136 void byteswap_uint8_array(void *buf, size_t size); 137 void zap_byteswap(void *buf, size_t size); 138 void zfs_oldacl_byteswap(void *buf, size_t size); 139 void zfs_acl_byteswap(void *buf, size_t size); 140 void zfs_znode_byteswap(void *buf, size_t size); 141 142 #define DS_FIND_SNAPSHOTS (1<<0) 143 #define DS_FIND_CHILDREN (1<<1) 144 145 /* 146 * The maximum number of bytes that can be accessed as part of one 147 * operation, including metadata. 148 */ 149 #define DMU_MAX_ACCESS (10<<20) /* 10MB */ 150 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */ 151 152 #define DMU_USERUSED_OBJECT (-1ULL) 153 #define DMU_GROUPUSED_OBJECT (-2ULL) 154 155 /* 156 * Public routines to create, destroy, open, and close objsets. 157 */ 158 int dmu_objset_hold(const char *name, void *tag, objset_t **osp); 159 int dmu_objset_own(const char *name, dmu_objset_type_t type, 160 boolean_t readonly, void *tag, objset_t **osp); 161 void dmu_objset_rele(objset_t *os, void *tag); 162 void dmu_objset_disown(objset_t *os, void *tag); 163 int dmu_objset_open_ds(struct dsl_dataset *ds, objset_t **osp); 164 165 int dmu_objset_evict_dbufs(objset_t *os); 166 int dmu_objset_create(const char *name, dmu_objset_type_t type, uint64_t flags, 167 void (*func)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx), void *arg); 168 int dmu_objset_clone(const char *name, struct dsl_dataset *clone_origin, 169 uint64_t flags); 170 int dmu_objset_destroy(const char *name, boolean_t defer); 171 int dmu_snapshots_destroy(char *fsname, char *snapname, boolean_t defer); 172 int dmu_objset_snapshot(char *fsname, char *snapname, struct nvlist *props, 173 boolean_t recursive); 174 int dmu_objset_rename(const char *name, const char *newname, 175 boolean_t recursive); 176 int dmu_objset_find(char *name, int func(char *, void *), void *arg, 177 int flags); 178 void dmu_objset_byteswap(void *buf, size_t size); 179 180 typedef struct dmu_buf { 181 uint64_t db_object; /* object that this buffer is part of */ 182 uint64_t db_offset; /* byte offset in this object */ 183 uint64_t db_size; /* size of buffer in bytes */ 184 void *db_data; /* data in buffer */ 185 } dmu_buf_t; 186 187 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr); 188 189 /* 190 * The names of zap entries in the DIRECTORY_OBJECT of the MOS. 191 */ 192 #define DMU_POOL_DIRECTORY_OBJECT 1 193 #define DMU_POOL_CONFIG "config" 194 #define DMU_POOL_ROOT_DATASET "root_dataset" 195 #define DMU_POOL_SYNC_BPLIST "sync_bplist" 196 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" 197 #define DMU_POOL_ERRLOG_LAST "errlog_last" 198 #define DMU_POOL_SPARES "spares" 199 #define DMU_POOL_DEFLATE "deflate" 200 #define DMU_POOL_HISTORY "history" 201 #define DMU_POOL_PROPS "pool_props" 202 #define DMU_POOL_L2CACHE "l2cache" 203 #define DMU_POOL_TMP_USERREFS "tmp_userrefs" 204 205 /* 4x8 zbookmark_t */ 206 #define DMU_POOL_SCRUB_BOOKMARK "scrub_bookmark" 207 /* 1x8 zap obj DMU_OT_SCRUB_QUEUE */ 208 #define DMU_POOL_SCRUB_QUEUE "scrub_queue" 209 /* 1x8 txg */ 210 #define DMU_POOL_SCRUB_MIN_TXG "scrub_min_txg" 211 /* 1x8 txg */ 212 #define DMU_POOL_SCRUB_MAX_TXG "scrub_max_txg" 213 /* 1x4 enum scrub_func */ 214 #define DMU_POOL_SCRUB_FUNC "scrub_func" 215 /* 1x8 count */ 216 #define DMU_POOL_SCRUB_ERRORS "scrub_errors" 217 218 /* 219 * Allocate an object from this objset. The range of object numbers 220 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode. 221 * 222 * The transaction must be assigned to a txg. The newly allocated 223 * object will be "held" in the transaction (ie. you can modify the 224 * newly allocated object in this transaction). 225 * 226 * dmu_object_alloc() chooses an object and returns it in *objectp. 227 * 228 * dmu_object_claim() allocates a specific object number. If that 229 * number is already allocated, it fails and returns EEXIST. 230 * 231 * Return 0 on success, or ENOSPC or EEXIST as specified above. 232 */ 233 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot, 234 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 235 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot, 236 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 237 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot, 238 int blocksize, dmu_object_type_t bonustype, int bonuslen); 239 240 /* 241 * Free an object from this objset. 242 * 243 * The object's data will be freed as well (ie. you don't need to call 244 * dmu_free(object, 0, -1, tx)). 245 * 246 * The object need not be held in the transaction. 247 * 248 * If there are any holds on this object's buffers (via dmu_buf_hold()), 249 * or tx holds on the object (via dmu_tx_hold_object()), you can not 250 * free it; it fails and returns EBUSY. 251 * 252 * If the object is not allocated, it fails and returns ENOENT. 253 * 254 * Return 0 on success, or EBUSY or ENOENT as specified above. 255 */ 256 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx); 257 258 /* 259 * Find the next allocated or free object. 260 * 261 * The objectp parameter is in-out. It will be updated to be the next 262 * object which is allocated. Ignore objects which have not been 263 * modified since txg. 264 * 265 * XXX Can only be called on a objset with no dirty data. 266 * 267 * Returns 0 on success, or ENOENT if there are no more objects. 268 */ 269 int dmu_object_next(objset_t *os, uint64_t *objectp, 270 boolean_t hole, uint64_t txg); 271 272 /* 273 * Set the data blocksize for an object. 274 * 275 * The object cannot have any blocks allcated beyond the first. If 276 * the first block is allocated already, the new size must be greater 277 * than the current block size. If these conditions are not met, 278 * ENOTSUP will be returned. 279 * 280 * Returns 0 on success, or EBUSY if there are any holds on the object 281 * contents, or ENOTSUP as described above. 282 */ 283 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, 284 int ibs, dmu_tx_t *tx); 285 286 /* 287 * Set the checksum property on a dnode. The new checksum algorithm will 288 * apply to all newly written blocks; existing blocks will not be affected. 289 */ 290 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, 291 dmu_tx_t *tx); 292 293 /* 294 * Set the compress property on a dnode. The new compression algorithm will 295 * apply to all newly written blocks; existing blocks will not be affected. 296 */ 297 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, 298 dmu_tx_t *tx); 299 300 /* 301 * Decide how many copies of a given block we should make. Can be from 302 * 1 to SPA_DVAS_PER_BP. 303 */ 304 int dmu_get_replication_level(objset_t *os, struct zbookmark *zb, 305 dmu_object_type_t ot); 306 /* 307 * The bonus data is accessed more or less like a regular buffer. 308 * You must dmu_bonus_hold() to get the buffer, which will give you a 309 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus 310 * data. As with any normal buffer, you must call dmu_buf_read() to 311 * read db_data, dmu_buf_will_dirty() before modifying it, and the 312 * object must be held in an assigned transaction before calling 313 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus 314 * buffer as well. You must release your hold with dmu_buf_rele(). 315 */ 316 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **); 317 int dmu_bonus_max(void); 318 int dmu_set_bonus(dmu_buf_t *, int, dmu_tx_t *); 319 320 /* 321 * Obtain the DMU buffer from the specified object which contains the 322 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so 323 * that it will remain in memory. You must release the hold with 324 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your 325 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU. 326 * 327 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill 328 * on the returned buffer before reading or writing the buffer's 329 * db_data. The comments for those routines describe what particular 330 * operations are valid after calling them. 331 * 332 * The object number must be a valid, allocated object number. 333 */ 334 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, 335 void *tag, dmu_buf_t **); 336 void dmu_buf_add_ref(dmu_buf_t *db, void* tag); 337 void dmu_buf_rele(dmu_buf_t *db, void *tag); 338 uint64_t dmu_buf_refcount(dmu_buf_t *db); 339 340 /* 341 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a 342 * range of an object. A pointer to an array of dmu_buf_t*'s is 343 * returned (in *dbpp). 344 * 345 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and 346 * frees the array. The hold on the array of buffers MUST be released 347 * with dmu_buf_rele_array. You can NOT release the hold on each buffer 348 * individually with dmu_buf_rele. 349 */ 350 int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset, 351 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp); 352 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag); 353 354 /* 355 * Returns NULL on success, or the existing user ptr if it's already 356 * been set. 357 * 358 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user(). 359 * 360 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which 361 * will be set to db->db_data when you are allowed to access it. Note 362 * that db->db_data (the pointer) can change when you do dmu_buf_read(), 363 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill(). 364 * *user_data_ptr_ptr will be set to the new value when it changes. 365 * 366 * If non-NULL, pageout func will be called when this buffer is being 367 * excised from the cache, so that you can clean up the data structure 368 * pointed to by user_ptr. 369 * 370 * dmu_evict_user() will call the pageout func for all buffers in a 371 * objset with a given pageout func. 372 */ 373 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr, 374 dmu_buf_evict_func_t *pageout_func); 375 /* 376 * set_user_ie is the same as set_user, but request immediate eviction 377 * when hold count goes to zero. 378 */ 379 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr, 380 void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func); 381 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr, 382 void *user_ptr, void *user_data_ptr_ptr, 383 dmu_buf_evict_func_t *pageout_func); 384 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func); 385 386 /* 387 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set. 388 */ 389 void *dmu_buf_get_user(dmu_buf_t *db); 390 391 /* 392 * Indicate that you are going to modify the buffer's data (db_data). 393 * 394 * The transaction (tx) must be assigned to a txg (ie. you've called 395 * dmu_tx_assign()). The buffer's object must be held in the tx 396 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)). 397 */ 398 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx); 399 400 /* 401 * Tells if the given dbuf is freeable. 402 */ 403 boolean_t dmu_buf_freeable(dmu_buf_t *); 404 405 /* 406 * You must create a transaction, then hold the objects which you will 407 * (or might) modify as part of this transaction. Then you must assign 408 * the transaction to a transaction group. Once the transaction has 409 * been assigned, you can modify buffers which belong to held objects as 410 * part of this transaction. You can't modify buffers before the 411 * transaction has been assigned; you can't modify buffers which don't 412 * belong to objects which this transaction holds; you can't hold 413 * objects once the transaction has been assigned. You may hold an 414 * object which you are going to free (with dmu_object_free()), but you 415 * don't have to. 416 * 417 * You can abort the transaction before it has been assigned. 418 * 419 * Note that you may hold buffers (with dmu_buf_hold) at any time, 420 * regardless of transaction state. 421 */ 422 423 #define DMU_NEW_OBJECT (-1ULL) 424 #define DMU_OBJECT_END (-1ULL) 425 426 dmu_tx_t *dmu_tx_create(objset_t *os); 427 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len); 428 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off, 429 uint64_t len); 430 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, const char *name); 431 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object); 432 void dmu_tx_abort(dmu_tx_t *tx); 433 int dmu_tx_assign(dmu_tx_t *tx, uint64_t txg_how); 434 void dmu_tx_wait(dmu_tx_t *tx); 435 void dmu_tx_commit(dmu_tx_t *tx); 436 437 /* 438 * Free up the data blocks for a defined range of a file. If size is 439 * zero, the range from offset to end-of-file is freed. 440 */ 441 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, 442 uint64_t size, dmu_tx_t *tx); 443 int dmu_free_long_range(objset_t *os, uint64_t object, uint64_t offset, 444 uint64_t size); 445 int dmu_free_object(objset_t *os, uint64_t object); 446 447 /* 448 * Convenience functions. 449 * 450 * Canfail routines will return 0 on success, or an errno if there is a 451 * nonrecoverable I/O error. 452 */ 453 #define DMU_READ_PREFETCH 0 /* prefetch */ 454 #define DMU_READ_NO_PREFETCH 1 /* don't prefetch */ 455 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 456 void *buf, uint32_t flags); 457 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 458 const void *buf, dmu_tx_t *tx); 459 void dmu_prealloc(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 460 dmu_tx_t *tx); 461 int dmu_read_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size); 462 int dmu_write_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size, 463 dmu_tx_t *tx); 464 int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset, 465 uint64_t size, struct page *pp, dmu_tx_t *tx); 466 struct arc_buf *dmu_request_arcbuf(dmu_buf_t *handle, int size); 467 void dmu_return_arcbuf(struct arc_buf *buf); 468 void dmu_assign_arcbuf(dmu_buf_t *handle, uint64_t offset, struct arc_buf *buf, 469 dmu_tx_t *tx); 470 471 extern int zfs_prefetch_disable; 472 473 /* 474 * Asynchronously try to read in the data. 475 */ 476 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset, 477 uint64_t len); 478 479 typedef struct dmu_object_info { 480 /* All sizes are in bytes. */ 481 uint32_t doi_data_block_size; 482 uint32_t doi_metadata_block_size; 483 uint64_t doi_bonus_size; 484 dmu_object_type_t doi_type; 485 dmu_object_type_t doi_bonus_type; 486 uint8_t doi_indirection; /* 2 = dnode->indirect->data */ 487 uint8_t doi_checksum; 488 uint8_t doi_compress; 489 uint8_t doi_pad[5]; 490 /* Values below are number of 512-byte blocks. */ 491 uint64_t doi_physical_blks; /* data + metadata */ 492 uint64_t doi_max_block_offset; 493 } dmu_object_info_t; 494 495 typedef void arc_byteswap_func_t(void *buf, size_t size); 496 497 typedef struct dmu_object_type_info { 498 arc_byteswap_func_t *ot_byteswap; 499 boolean_t ot_metadata; 500 char *ot_name; 501 } dmu_object_type_info_t; 502 503 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES]; 504 505 /* 506 * Get information on a DMU object. 507 * 508 * Return 0 on success or ENOENT if object is not allocated. 509 * 510 * If doi is NULL, just indicates whether the object exists. 511 */ 512 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi); 513 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi); 514 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi); 515 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize, 516 u_longlong_t *nblk512); 517 518 typedef struct dmu_objset_stats { 519 uint64_t dds_num_clones; /* number of clones of this */ 520 uint64_t dds_creation_txg; 521 uint64_t dds_guid; 522 dmu_objset_type_t dds_type; 523 uint8_t dds_is_snapshot; 524 uint8_t dds_inconsistent; 525 char dds_origin[MAXNAMELEN]; 526 } dmu_objset_stats_t; 527 528 /* 529 * Get stats on a dataset. 530 */ 531 void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat); 532 533 /* 534 * Add entries to the nvlist for all the objset's properties. See 535 * zfs_prop_table[] and zfs(1m) for details on the properties. 536 */ 537 void dmu_objset_stats(objset_t *os, struct nvlist *nv); 538 539 /* 540 * Get the space usage statistics for statvfs(). 541 * 542 * refdbytes is the amount of space "referenced" by this objset. 543 * availbytes is the amount of space available to this objset, taking 544 * into account quotas & reservations, assuming that no other objsets 545 * use the space first. These values correspond to the 'referenced' and 546 * 'available' properties, described in the zfs(1m) manpage. 547 * 548 * usedobjs and availobjs are the number of objects currently allocated, 549 * and available. 550 */ 551 void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp, 552 uint64_t *usedobjsp, uint64_t *availobjsp); 553 554 /* 555 * The fsid_guid is a 56-bit ID that can change to avoid collisions. 556 * (Contrast with the ds_guid which is a 64-bit ID that will never 557 * change, so there is a small probability that it will collide.) 558 */ 559 uint64_t dmu_objset_fsid_guid(objset_t *os); 560 561 int dmu_objset_is_snapshot(objset_t *os); 562 563 extern struct spa *dmu_objset_spa(objset_t *os); 564 extern struct zilog *dmu_objset_zil(objset_t *os); 565 extern struct dsl_pool *dmu_objset_pool(objset_t *os); 566 extern struct dsl_dataset *dmu_objset_ds(objset_t *os); 567 extern void dmu_objset_name(objset_t *os, char *buf); 568 extern dmu_objset_type_t dmu_objset_type(objset_t *os); 569 extern uint64_t dmu_objset_id(objset_t *os); 570 extern uint64_t dmu_objset_logbias(objset_t *os); 571 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name, 572 uint64_t *id, uint64_t *offp, boolean_t *case_conflict); 573 extern int dmu_snapshot_realname(objset_t *os, char *name, char *real, 574 int maxlen, boolean_t *conflict); 575 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name, 576 uint64_t *idp, uint64_t *offp); 577 578 typedef void objset_used_cb_t(objset_t *os, dmu_object_type_t bonustype, 579 void *oldbonus, void *newbonus, uint64_t oldused, uint64_t newused, 580 dmu_tx_t *tx); 581 extern void dmu_objset_register_type(dmu_objset_type_t ost, 582 objset_used_cb_t *cb); 583 extern void dmu_objset_set_user(objset_t *os, void *user_ptr); 584 extern void *dmu_objset_get_user(objset_t *os); 585 586 /* 587 * Return the txg number for the given assigned transaction. 588 */ 589 uint64_t dmu_tx_get_txg(dmu_tx_t *tx); 590 591 /* 592 * Synchronous write. 593 * If a parent zio is provided this function initiates a write on the 594 * provided buffer as a child of the parent zio. 595 * In the absence of a parent zio, the write is completed synchronously. 596 * At write completion, blk is filled with the bp of the written block. 597 * Note that while the data covered by this function will be on stable 598 * storage when the write completes this new data does not become a 599 * permanent part of the file until the associated transaction commits. 600 */ 601 typedef void dmu_sync_cb_t(dmu_buf_t *db, void *arg); 602 int dmu_sync(struct zio *zio, dmu_buf_t *db, 603 struct blkptr *bp, uint64_t txg, dmu_sync_cb_t *done, void *arg); 604 605 /* 606 * Find the next hole or data block in file starting at *off 607 * Return found offset in *off. Return ESRCH for end of file. 608 */ 609 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, 610 uint64_t *off); 611 612 /* 613 * Initial setup and final teardown. 614 */ 615 extern void dmu_init(void); 616 extern void dmu_fini(void); 617 618 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp, 619 uint64_t object, uint64_t offset, int len); 620 void dmu_traverse_objset(objset_t *os, uint64_t txg_start, 621 dmu_traverse_cb_t cb, void *arg); 622 623 int dmu_sendbackup(objset_t *tosnap, objset_t *fromsnap, boolean_t fromorigin, 624 struct vnode *vp, offset_t *off); 625 626 typedef struct dmu_recv_cookie { 627 /* 628 * This structure is opaque! 629 * 630 * If logical and real are different, we are recving the stream 631 * into the "real" temporary clone, and then switching it with 632 * the "logical" target. 633 */ 634 struct dsl_dataset *drc_logical_ds; 635 struct dsl_dataset *drc_real_ds; 636 struct drr_begin *drc_drrb; 637 char *drc_tosnap; 638 boolean_t drc_newfs; 639 boolean_t drc_force; 640 } dmu_recv_cookie_t; 641 642 int dmu_recv_begin(char *tofs, char *tosnap, struct drr_begin *, 643 boolean_t force, objset_t *origin, dmu_recv_cookie_t *); 644 int dmu_recv_stream(dmu_recv_cookie_t *drc, struct vnode *vp, offset_t *voffp); 645 int dmu_recv_end(dmu_recv_cookie_t *drc); 646 647 /* CRC64 table */ 648 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ 649 extern uint64_t zfs_crc64_table[256]; 650 651 #ifdef __cplusplus 652 } 653 #endif 654 655 #endif /* _SYS_DMU_H */ 656