xref: /illumos-gate/usr/src/uts/common/fs/zfs/sa.c (revision 4870e0a7381ec2ec57437062574e6ddc3dd48d7f)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
24  * Portions Copyright 2011 iXsystems, Inc
25  * Copyright (c) 2013 by Delphix. All rights reserved.
26  * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
27  */
28 
29 #include <sys/zfs_context.h>
30 #include <sys/types.h>
31 #include <sys/param.h>
32 #include <sys/systm.h>
33 #include <sys/sysmacros.h>
34 #include <sys/dmu.h>
35 #include <sys/dmu_impl.h>
36 #include <sys/dmu_objset.h>
37 #include <sys/dbuf.h>
38 #include <sys/dnode.h>
39 #include <sys/zap.h>
40 #include <sys/sa.h>
41 #include <sys/sunddi.h>
42 #include <sys/sa_impl.h>
43 #include <sys/dnode.h>
44 #include <sys/errno.h>
45 #include <sys/zfs_context.h>
46 
47 /*
48  * ZFS System attributes:
49  *
50  * A generic mechanism to allow for arbitrary attributes
51  * to be stored in a dnode.  The data will be stored in the bonus buffer of
52  * the dnode and if necessary a special "spill" block will be used to handle
53  * overflow situations.  The spill block will be sized to fit the data
54  * from 512 - 128K.  When a spill block is used the BP (blkptr_t) for the
55  * spill block is stored at the end of the current bonus buffer.  Any
56  * attributes that would be in the way of the blkptr_t will be relocated
57  * into the spill block.
58  *
59  * Attribute registration:
60  *
61  * Stored persistently on a per dataset basis
62  * a mapping between attribute "string" names and their actual attribute
63  * numeric values, length, and byteswap function.  The names are only used
64  * during registration.  All  attributes are known by their unique attribute
65  * id value.  If an attribute can have a variable size then the value
66  * 0 will be used to indicate this.
67  *
68  * Attribute Layout:
69  *
70  * Attribute layouts are a way to compactly store multiple attributes, but
71  * without taking the overhead associated with managing each attribute
72  * individually.  Since you will typically have the same set of attributes
73  * stored in the same order a single table will be used to represent that
74  * layout.  The ZPL for example will usually have only about 10 different
75  * layouts (regular files, device files, symlinks,
76  * regular files + scanstamp, files/dir with extended attributes, and then
77  * you have the possibility of all of those minus ACL, because it would
78  * be kicked out into the spill block)
79  *
80  * Layouts are simply an array of the attributes and their
81  * ordering i.e. [0, 1, 4, 5, 2]
82  *
83  * Each distinct layout is given a unique layout number and that is whats
84  * stored in the header at the beginning of the SA data buffer.
85  *
86  * A layout only covers a single dbuf (bonus or spill).  If a set of
87  * attributes is split up between the bonus buffer and a spill buffer then
88  * two different layouts will be used.  This allows us to byteswap the
89  * spill without looking at the bonus buffer and keeps the on disk format of
90  * the bonus and spill buffer the same.
91  *
92  * Adding a single attribute will cause the entire set of attributes to
93  * be rewritten and could result in a new layout number being constructed
94  * as part of the rewrite if no such layout exists for the new set of
95  * attribues.  The new attribute will be appended to the end of the already
96  * existing attributes.
97  *
98  * Both the attribute registration and attribute layout information are
99  * stored in normal ZAP attributes.  Their should be a small number of
100  * known layouts and the set of attributes is assumed to typically be quite
101  * small.
102  *
103  * The registered attributes and layout "table" information is maintained
104  * in core and a special "sa_os_t" is attached to the objset_t.
105  *
106  * A special interface is provided to allow for quickly applying
107  * a large set of attributes at once.  sa_replace_all_by_template() is
108  * used to set an array of attributes.  This is used by the ZPL when
109  * creating a brand new file.  The template that is passed into the function
110  * specifies the attribute, size for variable length attributes, location of
111  * data and special "data locator" function if the data isn't in a contiguous
112  * location.
113  *
114  * Byteswap implications:
115  *
116  * Since the SA attributes are not entirely self describing we can't do
117  * the normal byteswap processing.  The special ZAP layout attribute and
118  * attribute registration attributes define the byteswap function and the
119  * size of the attributes, unless it is variable sized.
120  * The normal ZFS byteswapping infrastructure assumes you don't need
121  * to read any objects in order to do the necessary byteswapping.  Whereas
122  * SA attributes can only be properly byteswapped if the dataset is opened
123  * and the layout/attribute ZAP attributes are available.  Because of this
124  * the SA attributes will be byteswapped when they are first accessed by
125  * the SA code that will read the SA data.
126  */
127 
128 typedef void (sa_iterfunc_t)(void *hdr, void *addr, sa_attr_type_t,
129     uint16_t length, int length_idx, boolean_t, void *userp);
130 
131 static int sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype);
132 static void sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab);
133 static void *sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype,
134     void *data);
135 static void sa_idx_tab_rele(objset_t *os, void *arg);
136 static void sa_copy_data(sa_data_locator_t *func, void *start, void *target,
137     int buflen);
138 static int sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr,
139     sa_data_op_t action, sa_data_locator_t *locator, void *datastart,
140     uint16_t buflen, dmu_tx_t *tx);
141 
142 arc_byteswap_func_t *sa_bswap_table[] = {
143 	byteswap_uint64_array,
144 	byteswap_uint32_array,
145 	byteswap_uint16_array,
146 	byteswap_uint8_array,
147 	zfs_acl_byteswap,
148 };
149 
150 #define	SA_COPY_DATA(f, s, t, l) \
151 	{ \
152 		if (f == NULL) { \
153 			if (l == 8) { \
154 				*(uint64_t *)t = *(uint64_t *)s; \
155 			} else if (l == 16) { \
156 				*(uint64_t *)t = *(uint64_t *)s; \
157 				*(uint64_t *)((uintptr_t)t + 8) = \
158 				    *(uint64_t *)((uintptr_t)s + 8); \
159 			} else { \
160 				bcopy(s, t, l); \
161 			} \
162 		} else \
163 			sa_copy_data(f, s, t, l); \
164 	}
165 
166 /*
167  * This table is fixed and cannot be changed.  Its purpose is to
168  * allow the SA code to work with both old/new ZPL file systems.
169  * It contains the list of legacy attributes.  These attributes aren't
170  * stored in the "attribute" registry zap objects, since older ZPL file systems
171  * won't have the registry.  Only objsets of type ZFS_TYPE_FILESYSTEM will
172  * use this static table.
173  */
174 sa_attr_reg_t sa_legacy_attrs[] = {
175 	{"ZPL_ATIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 0},
176 	{"ZPL_MTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 1},
177 	{"ZPL_CTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 2},
178 	{"ZPL_CRTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 3},
179 	{"ZPL_GEN", sizeof (uint64_t), SA_UINT64_ARRAY, 4},
180 	{"ZPL_MODE", sizeof (uint64_t), SA_UINT64_ARRAY, 5},
181 	{"ZPL_SIZE", sizeof (uint64_t), SA_UINT64_ARRAY, 6},
182 	{"ZPL_PARENT", sizeof (uint64_t), SA_UINT64_ARRAY, 7},
183 	{"ZPL_LINKS", sizeof (uint64_t), SA_UINT64_ARRAY, 8},
184 	{"ZPL_XATTR", sizeof (uint64_t), SA_UINT64_ARRAY, 9},
185 	{"ZPL_RDEV", sizeof (uint64_t), SA_UINT64_ARRAY, 10},
186 	{"ZPL_FLAGS", sizeof (uint64_t), SA_UINT64_ARRAY, 11},
187 	{"ZPL_UID", sizeof (uint64_t), SA_UINT64_ARRAY, 12},
188 	{"ZPL_GID", sizeof (uint64_t), SA_UINT64_ARRAY, 13},
189 	{"ZPL_PAD", sizeof (uint64_t) * 4, SA_UINT64_ARRAY, 14},
190 	{"ZPL_ZNODE_ACL", 88, SA_UINT8_ARRAY, 15},
191 };
192 
193 /*
194  * This is only used for objects of type DMU_OT_ZNODE
195  */
196 sa_attr_type_t sa_legacy_zpl_layout[] = {
197     0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
198 };
199 
200 /*
201  * Special dummy layout used for buffers with no attributes.
202  */
203 sa_attr_type_t sa_dummy_zpl_layout[] = { 0 };
204 
205 static int sa_legacy_attr_count = 16;
206 static kmem_cache_t *sa_cache = NULL;
207 
208 /*ARGSUSED*/
209 static int
210 sa_cache_constructor(void *buf, void *unused, int kmflag)
211 {
212 	sa_handle_t *hdl = buf;
213 
214 	mutex_init(&hdl->sa_lock, NULL, MUTEX_DEFAULT, NULL);
215 	return (0);
216 }
217 
218 /*ARGSUSED*/
219 static void
220 sa_cache_destructor(void *buf, void *unused)
221 {
222 	sa_handle_t *hdl = buf;
223 	mutex_destroy(&hdl->sa_lock);
224 }
225 
226 void
227 sa_cache_init(void)
228 {
229 	sa_cache = kmem_cache_create("sa_cache",
230 	    sizeof (sa_handle_t), 0, sa_cache_constructor,
231 	    sa_cache_destructor, NULL, NULL, NULL, 0);
232 }
233 
234 void
235 sa_cache_fini(void)
236 {
237 	if (sa_cache)
238 		kmem_cache_destroy(sa_cache);
239 }
240 
241 static int
242 layout_num_compare(const void *arg1, const void *arg2)
243 {
244 	const sa_lot_t *node1 = arg1;
245 	const sa_lot_t *node2 = arg2;
246 
247 	if (node1->lot_num > node2->lot_num)
248 		return (1);
249 	else if (node1->lot_num < node2->lot_num)
250 		return (-1);
251 	return (0);
252 }
253 
254 static int
255 layout_hash_compare(const void *arg1, const void *arg2)
256 {
257 	const sa_lot_t *node1 = arg1;
258 	const sa_lot_t *node2 = arg2;
259 
260 	if (node1->lot_hash > node2->lot_hash)
261 		return (1);
262 	if (node1->lot_hash < node2->lot_hash)
263 		return (-1);
264 	if (node1->lot_instance > node2->lot_instance)
265 		return (1);
266 	if (node1->lot_instance < node2->lot_instance)
267 		return (-1);
268 	return (0);
269 }
270 
271 boolean_t
272 sa_layout_equal(sa_lot_t *tbf, sa_attr_type_t *attrs, int count)
273 {
274 	int i;
275 
276 	if (count != tbf->lot_attr_count)
277 		return (1);
278 
279 	for (i = 0; i != count; i++) {
280 		if (attrs[i] != tbf->lot_attrs[i])
281 			return (1);
282 	}
283 	return (0);
284 }
285 
286 #define	SA_ATTR_HASH(attr) (zfs_crc64_table[(-1ULL ^ attr) & 0xFF])
287 
288 static uint64_t
289 sa_layout_info_hash(sa_attr_type_t *attrs, int attr_count)
290 {
291 	int i;
292 	uint64_t crc = -1ULL;
293 
294 	for (i = 0; i != attr_count; i++)
295 		crc ^= SA_ATTR_HASH(attrs[i]);
296 
297 	return (crc);
298 }
299 
300 static int
301 sa_get_spill(sa_handle_t *hdl)
302 {
303 	int rc;
304 	if (hdl->sa_spill == NULL) {
305 		if ((rc = dmu_spill_hold_existing(hdl->sa_bonus, NULL,
306 		    &hdl->sa_spill)) == 0)
307 			VERIFY(0 == sa_build_index(hdl, SA_SPILL));
308 	} else {
309 		rc = 0;
310 	}
311 
312 	return (rc);
313 }
314 
315 /*
316  * Main attribute lookup/update function
317  * returns 0 for success or non zero for failures
318  *
319  * Operates on bulk array, first failure will abort further processing
320  */
321 int
322 sa_attr_op(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count,
323     sa_data_op_t data_op, dmu_tx_t *tx)
324 {
325 	sa_os_t *sa = hdl->sa_os->os_sa;
326 	int i;
327 	int error = 0;
328 	sa_buf_type_t buftypes;
329 
330 	buftypes = 0;
331 
332 	ASSERT(count > 0);
333 	for (i = 0; i != count; i++) {
334 		ASSERT(bulk[i].sa_attr <= hdl->sa_os->os_sa->sa_num_attrs);
335 
336 		bulk[i].sa_addr = NULL;
337 		/* First check the bonus buffer */
338 
339 		if (hdl->sa_bonus_tab && TOC_ATTR_PRESENT(
340 		    hdl->sa_bonus_tab->sa_idx_tab[bulk[i].sa_attr])) {
341 			SA_ATTR_INFO(sa, hdl->sa_bonus_tab,
342 			    SA_GET_HDR(hdl, SA_BONUS),
343 			    bulk[i].sa_attr, bulk[i], SA_BONUS, hdl);
344 			if (tx && !(buftypes & SA_BONUS)) {
345 				dmu_buf_will_dirty(hdl->sa_bonus, tx);
346 				buftypes |= SA_BONUS;
347 			}
348 		}
349 		if (bulk[i].sa_addr == NULL &&
350 		    ((error = sa_get_spill(hdl)) == 0)) {
351 			if (TOC_ATTR_PRESENT(
352 			    hdl->sa_spill_tab->sa_idx_tab[bulk[i].sa_attr])) {
353 				SA_ATTR_INFO(sa, hdl->sa_spill_tab,
354 				    SA_GET_HDR(hdl, SA_SPILL),
355 				    bulk[i].sa_attr, bulk[i], SA_SPILL, hdl);
356 				if (tx && !(buftypes & SA_SPILL) &&
357 				    bulk[i].sa_size == bulk[i].sa_length) {
358 					dmu_buf_will_dirty(hdl->sa_spill, tx);
359 					buftypes |= SA_SPILL;
360 				}
361 			}
362 		}
363 		if (error && error != ENOENT) {
364 			return ((error == ECKSUM) ? EIO : error);
365 		}
366 
367 		switch (data_op) {
368 		case SA_LOOKUP:
369 			if (bulk[i].sa_addr == NULL)
370 				return (SET_ERROR(ENOENT));
371 			if (bulk[i].sa_data) {
372 				SA_COPY_DATA(bulk[i].sa_data_func,
373 				    bulk[i].sa_addr, bulk[i].sa_data,
374 				    bulk[i].sa_size);
375 			}
376 			continue;
377 
378 		case SA_UPDATE:
379 			/* existing rewrite of attr */
380 			if (bulk[i].sa_addr &&
381 			    bulk[i].sa_size == bulk[i].sa_length) {
382 				SA_COPY_DATA(bulk[i].sa_data_func,
383 				    bulk[i].sa_data, bulk[i].sa_addr,
384 				    bulk[i].sa_length);
385 				continue;
386 			} else if (bulk[i].sa_addr) { /* attr size change */
387 				error = sa_modify_attrs(hdl, bulk[i].sa_attr,
388 				    SA_REPLACE, bulk[i].sa_data_func,
389 				    bulk[i].sa_data, bulk[i].sa_length, tx);
390 			} else { /* adding new attribute */
391 				error = sa_modify_attrs(hdl, bulk[i].sa_attr,
392 				    SA_ADD, bulk[i].sa_data_func,
393 				    bulk[i].sa_data, bulk[i].sa_length, tx);
394 			}
395 			if (error)
396 				return (error);
397 			break;
398 		}
399 	}
400 	return (error);
401 }
402 
403 static sa_lot_t *
404 sa_add_layout_entry(objset_t *os, sa_attr_type_t *attrs, int attr_count,
405     uint64_t lot_num, uint64_t hash, boolean_t zapadd, dmu_tx_t *tx)
406 {
407 	sa_os_t *sa = os->os_sa;
408 	sa_lot_t *tb, *findtb;
409 	int i;
410 	avl_index_t loc;
411 
412 	ASSERT(MUTEX_HELD(&sa->sa_lock));
413 	tb = kmem_zalloc(sizeof (sa_lot_t), KM_SLEEP);
414 	tb->lot_attr_count = attr_count;
415 	tb->lot_attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count,
416 	    KM_SLEEP);
417 	bcopy(attrs, tb->lot_attrs, sizeof (sa_attr_type_t) * attr_count);
418 	tb->lot_num = lot_num;
419 	tb->lot_hash = hash;
420 	tb->lot_instance = 0;
421 
422 	if (zapadd) {
423 		char attr_name[8];
424 
425 		if (sa->sa_layout_attr_obj == 0) {
426 			sa->sa_layout_attr_obj = zap_create_link(os,
427 			    DMU_OT_SA_ATTR_LAYOUTS,
428 			    sa->sa_master_obj, SA_LAYOUTS, tx);
429 		}
430 
431 		(void) snprintf(attr_name, sizeof (attr_name),
432 		    "%d", (int)lot_num);
433 		VERIFY(0 == zap_update(os, os->os_sa->sa_layout_attr_obj,
434 		    attr_name, 2, attr_count, attrs, tx));
435 	}
436 
437 	list_create(&tb->lot_idx_tab, sizeof (sa_idx_tab_t),
438 	    offsetof(sa_idx_tab_t, sa_next));
439 
440 	for (i = 0; i != attr_count; i++) {
441 		if (sa->sa_attr_table[tb->lot_attrs[i]].sa_length == 0)
442 			tb->lot_var_sizes++;
443 	}
444 
445 	avl_add(&sa->sa_layout_num_tree, tb);
446 
447 	/* verify we don't have a hash collision */
448 	if ((findtb = avl_find(&sa->sa_layout_hash_tree, tb, &loc)) != NULL) {
449 		for (; findtb && findtb->lot_hash == hash;
450 		    findtb = AVL_NEXT(&sa->sa_layout_hash_tree, findtb)) {
451 			if (findtb->lot_instance != tb->lot_instance)
452 				break;
453 			tb->lot_instance++;
454 		}
455 	}
456 	avl_add(&sa->sa_layout_hash_tree, tb);
457 	return (tb);
458 }
459 
460 static void
461 sa_find_layout(objset_t *os, uint64_t hash, sa_attr_type_t *attrs,
462     int count, dmu_tx_t *tx, sa_lot_t **lot)
463 {
464 	sa_lot_t *tb, tbsearch;
465 	avl_index_t loc;
466 	sa_os_t *sa = os->os_sa;
467 	boolean_t found = B_FALSE;
468 
469 	mutex_enter(&sa->sa_lock);
470 	tbsearch.lot_hash = hash;
471 	tbsearch.lot_instance = 0;
472 	tb = avl_find(&sa->sa_layout_hash_tree, &tbsearch, &loc);
473 	if (tb) {
474 		for (; tb && tb->lot_hash == hash;
475 		    tb = AVL_NEXT(&sa->sa_layout_hash_tree, tb)) {
476 			if (sa_layout_equal(tb, attrs, count) == 0) {
477 				found = B_TRUE;
478 				break;
479 			}
480 		}
481 	}
482 	if (!found) {
483 		tb = sa_add_layout_entry(os, attrs, count,
484 		    avl_numnodes(&sa->sa_layout_num_tree), hash, B_TRUE, tx);
485 	}
486 	mutex_exit(&sa->sa_lock);
487 	*lot = tb;
488 }
489 
490 static int
491 sa_resize_spill(sa_handle_t *hdl, uint32_t size, dmu_tx_t *tx)
492 {
493 	int error;
494 	uint32_t blocksize;
495 
496 	if (size == 0) {
497 		blocksize = SPA_MINBLOCKSIZE;
498 	} else if (size > SPA_OLD_MAXBLOCKSIZE) {
499 		ASSERT(0);
500 		return (SET_ERROR(EFBIG));
501 	} else {
502 		blocksize = P2ROUNDUP_TYPED(size, SPA_MINBLOCKSIZE, uint32_t);
503 	}
504 
505 	error = dbuf_spill_set_blksz(hdl->sa_spill, blocksize, tx);
506 	ASSERT(error == 0);
507 	return (error);
508 }
509 
510 static void
511 sa_copy_data(sa_data_locator_t *func, void *datastart, void *target, int buflen)
512 {
513 	if (func == NULL) {
514 		bcopy(datastart, target, buflen);
515 	} else {
516 		boolean_t start;
517 		int bytes;
518 		void *dataptr;
519 		void *saptr = target;
520 		uint32_t length;
521 
522 		start = B_TRUE;
523 		bytes = 0;
524 		while (bytes < buflen) {
525 			func(&dataptr, &length, buflen, start, datastart);
526 			bcopy(dataptr, saptr, length);
527 			saptr = (void *)((caddr_t)saptr + length);
528 			bytes += length;
529 			start = B_FALSE;
530 		}
531 	}
532 }
533 
534 /*
535  * Determine several different sizes
536  * first the sa header size
537  * the number of bytes to be stored
538  * if spill would occur the index in the attribute array is returned
539  *
540  * the boolean will_spill will be set when spilling is necessary.  It
541  * is only set when the buftype is SA_BONUS
542  */
543 static int
544 sa_find_sizes(sa_os_t *sa, sa_bulk_attr_t *attr_desc, int attr_count,
545     dmu_buf_t *db, sa_buf_type_t buftype, int *index, int *total,
546     boolean_t *will_spill)
547 {
548 	int var_size = 0;
549 	int i;
550 	int full_space;
551 	int hdrsize;
552 	int extra_hdrsize;
553 
554 	if (buftype == SA_BONUS && sa->sa_force_spill) {
555 		*total = 0;
556 		*index = 0;
557 		*will_spill = B_TRUE;
558 		return (0);
559 	}
560 
561 	*index = -1;
562 	*total = 0;
563 	*will_spill = B_FALSE;
564 
565 	extra_hdrsize = 0;
566 	hdrsize = (SA_BONUSTYPE_FROM_DB(db) == DMU_OT_ZNODE) ? 0 :
567 	    sizeof (sa_hdr_phys_t);
568 
569 	full_space = (buftype == SA_BONUS) ? DN_MAX_BONUSLEN : db->db_size;
570 	ASSERT(IS_P2ALIGNED(full_space, 8));
571 
572 	for (i = 0; i != attr_count; i++) {
573 		boolean_t is_var_sz;
574 
575 		*total = P2ROUNDUP(*total, 8);
576 		*total += attr_desc[i].sa_length;
577 		if (*will_spill)
578 			continue;
579 
580 		is_var_sz = (SA_REGISTERED_LEN(sa, attr_desc[i].sa_attr) == 0);
581 		if (is_var_sz) {
582 			var_size++;
583 		}
584 
585 		if (is_var_sz && var_size > 1) {
586 			/*
587 			 * Don't worry that the spill block might overflow.
588 			 * It will be resized if needed in sa_build_layouts().
589 			 */
590 			if (buftype == SA_SPILL ||
591 			    P2ROUNDUP(hdrsize + sizeof (uint16_t), 8) +
592 			    *total < full_space) {
593 				/*
594 				 * Account for header space used by array of
595 				 * optional sizes of variable-length attributes.
596 				 * Record the extra header size in case this
597 				 * increase needs to be reversed due to
598 				 * spill-over.
599 				 */
600 				hdrsize += sizeof (uint16_t);
601 				if (*index != -1)
602 					extra_hdrsize += sizeof (uint16_t);
603 			} else {
604 				ASSERT(buftype == SA_BONUS);
605 				if (*index == -1)
606 					*index = i;
607 				*will_spill = B_TRUE;
608 				continue;
609 			}
610 		}
611 
612 		/*
613 		 * find index of where spill *could* occur.
614 		 * Then continue to count of remainder attribute
615 		 * space.  The sum is used later for sizing bonus
616 		 * and spill buffer.
617 		 */
618 		if (buftype == SA_BONUS && *index == -1 &&
619 		    *total + P2ROUNDUP(hdrsize, 8) >
620 		    (full_space - sizeof (blkptr_t))) {
621 			*index = i;
622 		}
623 
624 		if (*total + P2ROUNDUP(hdrsize, 8) > full_space &&
625 		    buftype == SA_BONUS)
626 			*will_spill = B_TRUE;
627 	}
628 
629 	if (*will_spill)
630 		hdrsize -= extra_hdrsize;
631 
632 	hdrsize = P2ROUNDUP(hdrsize, 8);
633 	return (hdrsize);
634 }
635 
636 #define	BUF_SPACE_NEEDED(total, header) (total + header)
637 
638 /*
639  * Find layout that corresponds to ordering of attributes
640  * If not found a new layout number is created and added to
641  * persistent layout tables.
642  */
643 static int
644 sa_build_layouts(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, int attr_count,
645     dmu_tx_t *tx)
646 {
647 	sa_os_t *sa = hdl->sa_os->os_sa;
648 	uint64_t hash;
649 	sa_buf_type_t buftype;
650 	sa_hdr_phys_t *sahdr;
651 	void *data_start;
652 	int buf_space;
653 	sa_attr_type_t *attrs, *attrs_start;
654 	int i, lot_count;
655 	int hdrsize;
656 	int spillhdrsize = 0;
657 	int used;
658 	dmu_object_type_t bonustype;
659 	sa_lot_t *lot;
660 	int len_idx;
661 	int spill_used;
662 	boolean_t spilling;
663 
664 	dmu_buf_will_dirty(hdl->sa_bonus, tx);
665 	bonustype = SA_BONUSTYPE_FROM_DB(hdl->sa_bonus);
666 
667 	/* first determine bonus header size and sum of all attributes */
668 	hdrsize = sa_find_sizes(sa, attr_desc, attr_count, hdl->sa_bonus,
669 	    SA_BONUS, &i, &used, &spilling);
670 
671 	if (used > SPA_OLD_MAXBLOCKSIZE)
672 		return (SET_ERROR(EFBIG));
673 
674 	VERIFY(0 == dmu_set_bonus(hdl->sa_bonus, spilling ?
675 	    MIN(DN_MAX_BONUSLEN - sizeof (blkptr_t), used + hdrsize) :
676 	    used + hdrsize, tx));
677 
678 	ASSERT((bonustype == DMU_OT_ZNODE && spilling == 0) ||
679 	    bonustype == DMU_OT_SA);
680 
681 	/* setup and size spill buffer when needed */
682 	if (spilling) {
683 		boolean_t dummy;
684 
685 		if (hdl->sa_spill == NULL) {
686 			VERIFY(dmu_spill_hold_by_bonus(hdl->sa_bonus, NULL,
687 			    &hdl->sa_spill) == 0);
688 		}
689 		dmu_buf_will_dirty(hdl->sa_spill, tx);
690 
691 		spillhdrsize = sa_find_sizes(sa, &attr_desc[i],
692 		    attr_count - i, hdl->sa_spill, SA_SPILL, &i,
693 		    &spill_used, &dummy);
694 
695 		if (spill_used > SPA_OLD_MAXBLOCKSIZE)
696 			return (SET_ERROR(EFBIG));
697 
698 		buf_space = hdl->sa_spill->db_size - spillhdrsize;
699 		if (BUF_SPACE_NEEDED(spill_used, spillhdrsize) >
700 		    hdl->sa_spill->db_size)
701 			VERIFY(0 == sa_resize_spill(hdl,
702 			    BUF_SPACE_NEEDED(spill_used, spillhdrsize), tx));
703 	}
704 
705 	/* setup starting pointers to lay down data */
706 	data_start = (void *)((uintptr_t)hdl->sa_bonus->db_data + hdrsize);
707 	sahdr = (sa_hdr_phys_t *)hdl->sa_bonus->db_data;
708 	buftype = SA_BONUS;
709 
710 	if (spilling)
711 		buf_space = (sa->sa_force_spill) ?
712 		    0 : SA_BLKPTR_SPACE - hdrsize;
713 	else
714 		buf_space = hdl->sa_bonus->db_size - hdrsize;
715 
716 	attrs_start = attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count,
717 	    KM_SLEEP);
718 	lot_count = 0;
719 
720 	for (i = 0, len_idx = 0, hash = -1ULL; i != attr_count; i++) {
721 		uint16_t length;
722 
723 		ASSERT(IS_P2ALIGNED(data_start, 8));
724 		ASSERT(IS_P2ALIGNED(buf_space, 8));
725 		attrs[i] = attr_desc[i].sa_attr;
726 		length = SA_REGISTERED_LEN(sa, attrs[i]);
727 		if (length == 0)
728 			length = attr_desc[i].sa_length;
729 
730 		if (buf_space < length) {  /* switch to spill buffer */
731 			VERIFY(spilling);
732 			VERIFY(bonustype == DMU_OT_SA);
733 			if (buftype == SA_BONUS && !sa->sa_force_spill) {
734 				sa_find_layout(hdl->sa_os, hash, attrs_start,
735 				    lot_count, tx, &lot);
736 				SA_SET_HDR(sahdr, lot->lot_num, hdrsize);
737 			}
738 
739 			buftype = SA_SPILL;
740 			hash = -1ULL;
741 			len_idx = 0;
742 
743 			sahdr = (sa_hdr_phys_t *)hdl->sa_spill->db_data;
744 			sahdr->sa_magic = SA_MAGIC;
745 			data_start = (void *)((uintptr_t)sahdr +
746 			    spillhdrsize);
747 			attrs_start = &attrs[i];
748 			buf_space = hdl->sa_spill->db_size - spillhdrsize;
749 			lot_count = 0;
750 		}
751 		hash ^= SA_ATTR_HASH(attrs[i]);
752 		attr_desc[i].sa_addr = data_start;
753 		attr_desc[i].sa_size = length;
754 		SA_COPY_DATA(attr_desc[i].sa_data_func, attr_desc[i].sa_data,
755 		    data_start, length);
756 		if (sa->sa_attr_table[attrs[i]].sa_length == 0) {
757 			sahdr->sa_lengths[len_idx++] = length;
758 		}
759 		data_start = (void *)P2ROUNDUP(((uintptr_t)data_start +
760 		    length), 8);
761 		buf_space -= P2ROUNDUP(length, 8);
762 		lot_count++;
763 	}
764 
765 	sa_find_layout(hdl->sa_os, hash, attrs_start, lot_count, tx, &lot);
766 
767 	/*
768 	 * Verify that old znodes always have layout number 0.
769 	 * Must be DMU_OT_SA for arbitrary layouts
770 	 */
771 	VERIFY((bonustype == DMU_OT_ZNODE && lot->lot_num == 0) ||
772 	    (bonustype == DMU_OT_SA && lot->lot_num > 1));
773 
774 	if (bonustype == DMU_OT_SA) {
775 		SA_SET_HDR(sahdr, lot->lot_num,
776 		    buftype == SA_BONUS ? hdrsize : spillhdrsize);
777 	}
778 
779 	kmem_free(attrs, sizeof (sa_attr_type_t) * attr_count);
780 	if (hdl->sa_bonus_tab) {
781 		sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab);
782 		hdl->sa_bonus_tab = NULL;
783 	}
784 	if (!sa->sa_force_spill)
785 		VERIFY(0 == sa_build_index(hdl, SA_BONUS));
786 	if (hdl->sa_spill) {
787 		sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab);
788 		if (!spilling) {
789 			/*
790 			 * remove spill block that is no longer needed.
791 			 */
792 			dmu_buf_rele(hdl->sa_spill, NULL);
793 			hdl->sa_spill = NULL;
794 			hdl->sa_spill_tab = NULL;
795 			VERIFY(0 == dmu_rm_spill(hdl->sa_os,
796 			    sa_handle_object(hdl), tx));
797 		} else {
798 			VERIFY(0 == sa_build_index(hdl, SA_SPILL));
799 		}
800 	}
801 
802 	return (0);
803 }
804 
805 static void
806 sa_free_attr_table(sa_os_t *sa)
807 {
808 	int i;
809 
810 	if (sa->sa_attr_table == NULL)
811 		return;
812 
813 	for (i = 0; i != sa->sa_num_attrs; i++) {
814 		if (sa->sa_attr_table[i].sa_name)
815 			kmem_free(sa->sa_attr_table[i].sa_name,
816 			    strlen(sa->sa_attr_table[i].sa_name) + 1);
817 	}
818 
819 	kmem_free(sa->sa_attr_table,
820 	    sizeof (sa_attr_table_t) * sa->sa_num_attrs);
821 
822 	sa->sa_attr_table = NULL;
823 }
824 
825 static int
826 sa_attr_table_setup(objset_t *os, sa_attr_reg_t *reg_attrs, int count)
827 {
828 	sa_os_t *sa = os->os_sa;
829 	uint64_t sa_attr_count = 0;
830 	uint64_t sa_reg_count = 0;
831 	int error = 0;
832 	uint64_t attr_value;
833 	sa_attr_table_t *tb;
834 	zap_cursor_t zc;
835 	zap_attribute_t za;
836 	int registered_count = 0;
837 	int i;
838 	dmu_objset_type_t ostype = dmu_objset_type(os);
839 
840 	sa->sa_user_table =
841 	    kmem_zalloc(count * sizeof (sa_attr_type_t), KM_SLEEP);
842 	sa->sa_user_table_sz = count * sizeof (sa_attr_type_t);
843 
844 	if (sa->sa_reg_attr_obj != 0) {
845 		error = zap_count(os, sa->sa_reg_attr_obj,
846 		    &sa_attr_count);
847 
848 		/*
849 		 * Make sure we retrieved a count and that it isn't zero
850 		 */
851 		if (error || (error == 0 && sa_attr_count == 0)) {
852 			if (error == 0)
853 				error = SET_ERROR(EINVAL);
854 			goto bail;
855 		}
856 		sa_reg_count = sa_attr_count;
857 	}
858 
859 	if (ostype == DMU_OST_ZFS && sa_attr_count == 0)
860 		sa_attr_count += sa_legacy_attr_count;
861 
862 	/* Allocate attribute numbers for attributes that aren't registered */
863 	for (i = 0; i != count; i++) {
864 		boolean_t found = B_FALSE;
865 		int j;
866 
867 		if (ostype == DMU_OST_ZFS) {
868 			for (j = 0; j != sa_legacy_attr_count; j++) {
869 				if (strcmp(reg_attrs[i].sa_name,
870 				    sa_legacy_attrs[j].sa_name) == 0) {
871 					sa->sa_user_table[i] =
872 					    sa_legacy_attrs[j].sa_attr;
873 					found = B_TRUE;
874 				}
875 			}
876 		}
877 		if (found)
878 			continue;
879 
880 		if (sa->sa_reg_attr_obj)
881 			error = zap_lookup(os, sa->sa_reg_attr_obj,
882 			    reg_attrs[i].sa_name, 8, 1, &attr_value);
883 		else
884 			error = SET_ERROR(ENOENT);
885 		switch (error) {
886 		case ENOENT:
887 			sa->sa_user_table[i] = (sa_attr_type_t)sa_attr_count;
888 			sa_attr_count++;
889 			break;
890 		case 0:
891 			sa->sa_user_table[i] = ATTR_NUM(attr_value);
892 			break;
893 		default:
894 			goto bail;
895 		}
896 	}
897 
898 	sa->sa_num_attrs = sa_attr_count;
899 	tb = sa->sa_attr_table =
900 	    kmem_zalloc(sizeof (sa_attr_table_t) * sa_attr_count, KM_SLEEP);
901 
902 	/*
903 	 * Attribute table is constructed from requested attribute list,
904 	 * previously foreign registered attributes, and also the legacy
905 	 * ZPL set of attributes.
906 	 */
907 
908 	if (sa->sa_reg_attr_obj) {
909 		for (zap_cursor_init(&zc, os, sa->sa_reg_attr_obj);
910 		    (error = zap_cursor_retrieve(&zc, &za)) == 0;
911 		    zap_cursor_advance(&zc)) {
912 			uint64_t value;
913 			value  = za.za_first_integer;
914 
915 			registered_count++;
916 			tb[ATTR_NUM(value)].sa_attr = ATTR_NUM(value);
917 			tb[ATTR_NUM(value)].sa_length = ATTR_LENGTH(value);
918 			tb[ATTR_NUM(value)].sa_byteswap = ATTR_BSWAP(value);
919 			tb[ATTR_NUM(value)].sa_registered = B_TRUE;
920 
921 			if (tb[ATTR_NUM(value)].sa_name) {
922 				continue;
923 			}
924 			tb[ATTR_NUM(value)].sa_name =
925 			    kmem_zalloc(strlen(za.za_name) +1, KM_SLEEP);
926 			(void) strlcpy(tb[ATTR_NUM(value)].sa_name, za.za_name,
927 			    strlen(za.za_name) +1);
928 		}
929 		zap_cursor_fini(&zc);
930 		/*
931 		 * Make sure we processed the correct number of registered
932 		 * attributes
933 		 */
934 		if (registered_count != sa_reg_count) {
935 			ASSERT(error != 0);
936 			goto bail;
937 		}
938 
939 	}
940 
941 	if (ostype == DMU_OST_ZFS) {
942 		for (i = 0; i != sa_legacy_attr_count; i++) {
943 			if (tb[i].sa_name)
944 				continue;
945 			tb[i].sa_attr = sa_legacy_attrs[i].sa_attr;
946 			tb[i].sa_length = sa_legacy_attrs[i].sa_length;
947 			tb[i].sa_byteswap = sa_legacy_attrs[i].sa_byteswap;
948 			tb[i].sa_registered = B_FALSE;
949 			tb[i].sa_name =
950 			    kmem_zalloc(strlen(sa_legacy_attrs[i].sa_name) +1,
951 			    KM_SLEEP);
952 			(void) strlcpy(tb[i].sa_name,
953 			    sa_legacy_attrs[i].sa_name,
954 			    strlen(sa_legacy_attrs[i].sa_name) + 1);
955 		}
956 	}
957 
958 	for (i = 0; i != count; i++) {
959 		sa_attr_type_t attr_id;
960 
961 		attr_id = sa->sa_user_table[i];
962 		if (tb[attr_id].sa_name)
963 			continue;
964 
965 		tb[attr_id].sa_length = reg_attrs[i].sa_length;
966 		tb[attr_id].sa_byteswap = reg_attrs[i].sa_byteswap;
967 		tb[attr_id].sa_attr = attr_id;
968 		tb[attr_id].sa_name =
969 		    kmem_zalloc(strlen(reg_attrs[i].sa_name) + 1, KM_SLEEP);
970 		(void) strlcpy(tb[attr_id].sa_name, reg_attrs[i].sa_name,
971 		    strlen(reg_attrs[i].sa_name) + 1);
972 	}
973 
974 	sa->sa_need_attr_registration =
975 	    (sa_attr_count != registered_count);
976 
977 	return (0);
978 bail:
979 	kmem_free(sa->sa_user_table, count * sizeof (sa_attr_type_t));
980 	sa->sa_user_table = NULL;
981 	sa_free_attr_table(sa);
982 	return ((error != 0) ? error : EINVAL);
983 }
984 
985 int
986 sa_setup(objset_t *os, uint64_t sa_obj, sa_attr_reg_t *reg_attrs, int count,
987     sa_attr_type_t **user_table)
988 {
989 	zap_cursor_t zc;
990 	zap_attribute_t za;
991 	sa_os_t *sa;
992 	dmu_objset_type_t ostype = dmu_objset_type(os);
993 	sa_attr_type_t *tb;
994 	int error;
995 
996 	mutex_enter(&os->os_user_ptr_lock);
997 	if (os->os_sa) {
998 		mutex_enter(&os->os_sa->sa_lock);
999 		mutex_exit(&os->os_user_ptr_lock);
1000 		tb = os->os_sa->sa_user_table;
1001 		mutex_exit(&os->os_sa->sa_lock);
1002 		*user_table = tb;
1003 		return (0);
1004 	}
1005 
1006 	sa = kmem_zalloc(sizeof (sa_os_t), KM_SLEEP);
1007 	mutex_init(&sa->sa_lock, NULL, MUTEX_DEFAULT, NULL);
1008 	sa->sa_master_obj = sa_obj;
1009 
1010 	os->os_sa = sa;
1011 	mutex_enter(&sa->sa_lock);
1012 	mutex_exit(&os->os_user_ptr_lock);
1013 	avl_create(&sa->sa_layout_num_tree, layout_num_compare,
1014 	    sizeof (sa_lot_t), offsetof(sa_lot_t, lot_num_node));
1015 	avl_create(&sa->sa_layout_hash_tree, layout_hash_compare,
1016 	    sizeof (sa_lot_t), offsetof(sa_lot_t, lot_hash_node));
1017 
1018 	if (sa_obj) {
1019 		error = zap_lookup(os, sa_obj, SA_LAYOUTS,
1020 		    8, 1, &sa->sa_layout_attr_obj);
1021 		if (error != 0 && error != ENOENT)
1022 			goto fail;
1023 		error = zap_lookup(os, sa_obj, SA_REGISTRY,
1024 		    8, 1, &sa->sa_reg_attr_obj);
1025 		if (error != 0 && error != ENOENT)
1026 			goto fail;
1027 	}
1028 
1029 	if ((error = sa_attr_table_setup(os, reg_attrs, count)) != 0)
1030 		goto fail;
1031 
1032 	if (sa->sa_layout_attr_obj != 0) {
1033 		uint64_t layout_count;
1034 
1035 		error = zap_count(os, sa->sa_layout_attr_obj,
1036 		    &layout_count);
1037 
1038 		/*
1039 		 * Layout number count should be > 0
1040 		 */
1041 		if (error || (error == 0 && layout_count == 0)) {
1042 			if (error == 0)
1043 				error = SET_ERROR(EINVAL);
1044 			goto fail;
1045 		}
1046 
1047 		for (zap_cursor_init(&zc, os, sa->sa_layout_attr_obj);
1048 		    (error = zap_cursor_retrieve(&zc, &za)) == 0;
1049 		    zap_cursor_advance(&zc)) {
1050 			sa_attr_type_t *lot_attrs;
1051 			uint64_t lot_num;
1052 
1053 			lot_attrs = kmem_zalloc(sizeof (sa_attr_type_t) *
1054 			    za.za_num_integers, KM_SLEEP);
1055 
1056 			if ((error = (zap_lookup(os, sa->sa_layout_attr_obj,
1057 			    za.za_name, 2, za.za_num_integers,
1058 			    lot_attrs))) != 0) {
1059 				kmem_free(lot_attrs, sizeof (sa_attr_type_t) *
1060 				    za.za_num_integers);
1061 				break;
1062 			}
1063 			VERIFY(ddi_strtoull(za.za_name, NULL, 10,
1064 			    (unsigned long long *)&lot_num) == 0);
1065 
1066 			(void) sa_add_layout_entry(os, lot_attrs,
1067 			    za.za_num_integers, lot_num,
1068 			    sa_layout_info_hash(lot_attrs,
1069 			    za.za_num_integers), B_FALSE, NULL);
1070 			kmem_free(lot_attrs, sizeof (sa_attr_type_t) *
1071 			    za.za_num_integers);
1072 		}
1073 		zap_cursor_fini(&zc);
1074 
1075 		/*
1076 		 * Make sure layout count matches number of entries added
1077 		 * to AVL tree
1078 		 */
1079 		if (avl_numnodes(&sa->sa_layout_num_tree) != layout_count) {
1080 			ASSERT(error != 0);
1081 			goto fail;
1082 		}
1083 	}
1084 
1085 	/* Add special layout number for old ZNODES */
1086 	if (ostype == DMU_OST_ZFS) {
1087 		(void) sa_add_layout_entry(os, sa_legacy_zpl_layout,
1088 		    sa_legacy_attr_count, 0,
1089 		    sa_layout_info_hash(sa_legacy_zpl_layout,
1090 		    sa_legacy_attr_count), B_FALSE, NULL);
1091 
1092 		(void) sa_add_layout_entry(os, sa_dummy_zpl_layout, 0, 1,
1093 		    0, B_FALSE, NULL);
1094 	}
1095 	*user_table = os->os_sa->sa_user_table;
1096 	mutex_exit(&sa->sa_lock);
1097 	return (0);
1098 fail:
1099 	os->os_sa = NULL;
1100 	sa_free_attr_table(sa);
1101 	if (sa->sa_user_table)
1102 		kmem_free(sa->sa_user_table, sa->sa_user_table_sz);
1103 	mutex_exit(&sa->sa_lock);
1104 	avl_destroy(&sa->sa_layout_hash_tree);
1105 	avl_destroy(&sa->sa_layout_num_tree);
1106 	mutex_destroy(&sa->sa_lock);
1107 	kmem_free(sa, sizeof (sa_os_t));
1108 	return ((error == ECKSUM) ? EIO : error);
1109 }
1110 
1111 void
1112 sa_tear_down(objset_t *os)
1113 {
1114 	sa_os_t *sa = os->os_sa;
1115 	sa_lot_t *layout;
1116 	void *cookie;
1117 
1118 	kmem_free(sa->sa_user_table, sa->sa_user_table_sz);
1119 
1120 	/* Free up attr table */
1121 
1122 	sa_free_attr_table(sa);
1123 
1124 	cookie = NULL;
1125 	while (layout = avl_destroy_nodes(&sa->sa_layout_hash_tree, &cookie)) {
1126 		sa_idx_tab_t *tab;
1127 		while (tab = list_head(&layout->lot_idx_tab)) {
1128 			ASSERT(refcount_count(&tab->sa_refcount));
1129 			sa_idx_tab_rele(os, tab);
1130 		}
1131 	}
1132 
1133 	cookie = NULL;
1134 	while (layout = avl_destroy_nodes(&sa->sa_layout_num_tree, &cookie)) {
1135 		kmem_free(layout->lot_attrs,
1136 		    sizeof (sa_attr_type_t) * layout->lot_attr_count);
1137 		kmem_free(layout, sizeof (sa_lot_t));
1138 	}
1139 
1140 	avl_destroy(&sa->sa_layout_hash_tree);
1141 	avl_destroy(&sa->sa_layout_num_tree);
1142 	mutex_destroy(&sa->sa_lock);
1143 
1144 	kmem_free(sa, sizeof (sa_os_t));
1145 	os->os_sa = NULL;
1146 }
1147 
1148 void
1149 sa_build_idx_tab(void *hdr, void *attr_addr, sa_attr_type_t attr,
1150     uint16_t length, int length_idx, boolean_t var_length, void *userp)
1151 {
1152 	sa_idx_tab_t *idx_tab = userp;
1153 
1154 	if (var_length) {
1155 		ASSERT(idx_tab->sa_variable_lengths);
1156 		idx_tab->sa_variable_lengths[length_idx] = length;
1157 	}
1158 	TOC_ATTR_ENCODE(idx_tab->sa_idx_tab[attr], length_idx,
1159 	    (uint32_t)((uintptr_t)attr_addr - (uintptr_t)hdr));
1160 }
1161 
1162 static void
1163 sa_attr_iter(objset_t *os, sa_hdr_phys_t *hdr, dmu_object_type_t type,
1164     sa_iterfunc_t func, sa_lot_t *tab, void *userp)
1165 {
1166 	void *data_start;
1167 	sa_lot_t *tb = tab;
1168 	sa_lot_t search;
1169 	avl_index_t loc;
1170 	sa_os_t *sa = os->os_sa;
1171 	int i;
1172 	uint16_t *length_start = NULL;
1173 	uint8_t length_idx = 0;
1174 
1175 	if (tab == NULL) {
1176 		search.lot_num = SA_LAYOUT_NUM(hdr, type);
1177 		tb = avl_find(&sa->sa_layout_num_tree, &search, &loc);
1178 		ASSERT(tb);
1179 	}
1180 
1181 	if (IS_SA_BONUSTYPE(type)) {
1182 		data_start = (void *)P2ROUNDUP(((uintptr_t)hdr +
1183 		    offsetof(sa_hdr_phys_t, sa_lengths) +
1184 		    (sizeof (uint16_t) * tb->lot_var_sizes)), 8);
1185 		length_start = hdr->sa_lengths;
1186 	} else {
1187 		data_start = hdr;
1188 	}
1189 
1190 	for (i = 0; i != tb->lot_attr_count; i++) {
1191 		int attr_length, reg_length;
1192 		uint8_t idx_len;
1193 
1194 		reg_length = sa->sa_attr_table[tb->lot_attrs[i]].sa_length;
1195 		if (reg_length) {
1196 			attr_length = reg_length;
1197 			idx_len = 0;
1198 		} else {
1199 			attr_length = length_start[length_idx];
1200 			idx_len = length_idx++;
1201 		}
1202 
1203 		func(hdr, data_start, tb->lot_attrs[i], attr_length,
1204 		    idx_len, reg_length == 0 ? B_TRUE : B_FALSE, userp);
1205 
1206 		data_start = (void *)P2ROUNDUP(((uintptr_t)data_start +
1207 		    attr_length), 8);
1208 	}
1209 }
1210 
1211 /*ARGSUSED*/
1212 void
1213 sa_byteswap_cb(void *hdr, void *attr_addr, sa_attr_type_t attr,
1214     uint16_t length, int length_idx, boolean_t variable_length, void *userp)
1215 {
1216 	sa_handle_t *hdl = userp;
1217 	sa_os_t *sa = hdl->sa_os->os_sa;
1218 
1219 	sa_bswap_table[sa->sa_attr_table[attr].sa_byteswap](attr_addr, length);
1220 }
1221 
1222 void
1223 sa_byteswap(sa_handle_t *hdl, sa_buf_type_t buftype)
1224 {
1225 	sa_hdr_phys_t *sa_hdr_phys = SA_GET_HDR(hdl, buftype);
1226 	dmu_buf_impl_t *db;
1227 	sa_os_t *sa = hdl->sa_os->os_sa;
1228 	int num_lengths = 1;
1229 	int i;
1230 
1231 	ASSERT(MUTEX_HELD(&sa->sa_lock));
1232 	if (sa_hdr_phys->sa_magic == SA_MAGIC)
1233 		return;
1234 
1235 	db = SA_GET_DB(hdl, buftype);
1236 
1237 	if (buftype == SA_SPILL) {
1238 		arc_release(db->db_buf, NULL);
1239 		arc_buf_thaw(db->db_buf);
1240 	}
1241 
1242 	sa_hdr_phys->sa_magic = BSWAP_32(sa_hdr_phys->sa_magic);
1243 	sa_hdr_phys->sa_layout_info = BSWAP_16(sa_hdr_phys->sa_layout_info);
1244 
1245 	/*
1246 	 * Determine number of variable lenghts in header
1247 	 * The standard 8 byte header has one for free and a
1248 	 * 16 byte header would have 4 + 1;
1249 	 */
1250 	if (SA_HDR_SIZE(sa_hdr_phys) > 8)
1251 		num_lengths += (SA_HDR_SIZE(sa_hdr_phys) - 8) >> 1;
1252 	for (i = 0; i != num_lengths; i++)
1253 		sa_hdr_phys->sa_lengths[i] =
1254 		    BSWAP_16(sa_hdr_phys->sa_lengths[i]);
1255 
1256 	sa_attr_iter(hdl->sa_os, sa_hdr_phys, DMU_OT_SA,
1257 	    sa_byteswap_cb, NULL, hdl);
1258 
1259 	if (buftype == SA_SPILL)
1260 		arc_buf_freeze(((dmu_buf_impl_t *)hdl->sa_spill)->db_buf);
1261 }
1262 
1263 static int
1264 sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype)
1265 {
1266 	sa_hdr_phys_t *sa_hdr_phys;
1267 	dmu_buf_impl_t *db = SA_GET_DB(hdl, buftype);
1268 	dmu_object_type_t bonustype = SA_BONUSTYPE_FROM_DB(db);
1269 	sa_os_t *sa = hdl->sa_os->os_sa;
1270 	sa_idx_tab_t *idx_tab;
1271 
1272 	sa_hdr_phys = SA_GET_HDR(hdl, buftype);
1273 
1274 	mutex_enter(&sa->sa_lock);
1275 
1276 	/* Do we need to byteswap? */
1277 
1278 	/* only check if not old znode */
1279 	if (IS_SA_BONUSTYPE(bonustype) && sa_hdr_phys->sa_magic != SA_MAGIC &&
1280 	    sa_hdr_phys->sa_magic != 0) {
1281 		VERIFY(BSWAP_32(sa_hdr_phys->sa_magic) == SA_MAGIC);
1282 		sa_byteswap(hdl, buftype);
1283 	}
1284 
1285 	idx_tab = sa_find_idx_tab(hdl->sa_os, bonustype, sa_hdr_phys);
1286 
1287 	if (buftype == SA_BONUS)
1288 		hdl->sa_bonus_tab = idx_tab;
1289 	else
1290 		hdl->sa_spill_tab = idx_tab;
1291 
1292 	mutex_exit(&sa->sa_lock);
1293 	return (0);
1294 }
1295 
1296 /*ARGSUSED*/
1297 static void
1298 sa_evict(void *dbu)
1299 {
1300 	panic("evicting sa dbuf\n");
1301 }
1302 
1303 static void
1304 sa_idx_tab_rele(objset_t *os, void *arg)
1305 {
1306 	sa_os_t *sa = os->os_sa;
1307 	sa_idx_tab_t *idx_tab = arg;
1308 
1309 	if (idx_tab == NULL)
1310 		return;
1311 
1312 	mutex_enter(&sa->sa_lock);
1313 	if (refcount_remove(&idx_tab->sa_refcount, NULL) == 0) {
1314 		list_remove(&idx_tab->sa_layout->lot_idx_tab, idx_tab);
1315 		if (idx_tab->sa_variable_lengths)
1316 			kmem_free(idx_tab->sa_variable_lengths,
1317 			    sizeof (uint16_t) *
1318 			    idx_tab->sa_layout->lot_var_sizes);
1319 		refcount_destroy(&idx_tab->sa_refcount);
1320 		kmem_free(idx_tab->sa_idx_tab,
1321 		    sizeof (uint32_t) * sa->sa_num_attrs);
1322 		kmem_free(idx_tab, sizeof (sa_idx_tab_t));
1323 	}
1324 	mutex_exit(&sa->sa_lock);
1325 }
1326 
1327 static void
1328 sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab)
1329 {
1330 	sa_os_t *sa = os->os_sa;
1331 
1332 	ASSERT(MUTEX_HELD(&sa->sa_lock));
1333 	(void) refcount_add(&idx_tab->sa_refcount, NULL);
1334 }
1335 
1336 void
1337 sa_handle_destroy(sa_handle_t *hdl)
1338 {
1339 	dmu_buf_t *db = hdl->sa_bonus;
1340 
1341 	mutex_enter(&hdl->sa_lock);
1342 	(void) dmu_buf_remove_user(db, &hdl->sa_dbu);
1343 
1344 	if (hdl->sa_bonus_tab)
1345 		sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab);
1346 
1347 	if (hdl->sa_spill_tab)
1348 		sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab);
1349 
1350 	dmu_buf_rele(hdl->sa_bonus, NULL);
1351 
1352 	if (hdl->sa_spill)
1353 		dmu_buf_rele((dmu_buf_t *)hdl->sa_spill, NULL);
1354 	mutex_exit(&hdl->sa_lock);
1355 
1356 	kmem_cache_free(sa_cache, hdl);
1357 }
1358 
1359 int
1360 sa_handle_get_from_db(objset_t *os, dmu_buf_t *db, void *userp,
1361     sa_handle_type_t hdl_type, sa_handle_t **handlepp)
1362 {
1363 	int error = 0;
1364 	dmu_object_info_t doi;
1365 	sa_handle_t *handle = NULL;
1366 
1367 #ifdef ZFS_DEBUG
1368 	dmu_object_info_from_db(db, &doi);
1369 	ASSERT(doi.doi_bonus_type == DMU_OT_SA ||
1370 	    doi.doi_bonus_type == DMU_OT_ZNODE);
1371 #endif
1372 	/* find handle, if it exists */
1373 	/* if one doesn't exist then create a new one, and initialize it */
1374 
1375 	if (hdl_type == SA_HDL_SHARED)
1376 		handle = dmu_buf_get_user(db);
1377 
1378 	if (handle == NULL) {
1379 		sa_handle_t *winner = NULL;
1380 
1381 		handle = kmem_cache_alloc(sa_cache, KM_SLEEP);
1382 		handle->sa_dbu.dbu_evict_func = NULL;
1383 		handle->sa_userp = userp;
1384 		handle->sa_bonus = db;
1385 		handle->sa_os = os;
1386 		handle->sa_spill = NULL;
1387 		handle->sa_bonus_tab = NULL;
1388 		handle->sa_spill_tab = NULL;
1389 
1390 		error = sa_build_index(handle, SA_BONUS);
1391 
1392 		if (hdl_type == SA_HDL_SHARED) {
1393 			dmu_buf_init_user(&handle->sa_dbu, sa_evict, NULL);
1394 			winner = dmu_buf_set_user_ie(db, &handle->sa_dbu);
1395 		}
1396 
1397 		if (winner != NULL) {
1398 			kmem_cache_free(sa_cache, handle);
1399 			handle = winner;
1400 		}
1401 	}
1402 	*handlepp = handle;
1403 
1404 	return (error);
1405 }
1406 
1407 int
1408 sa_handle_get(objset_t *objset, uint64_t objid, void *userp,
1409     sa_handle_type_t hdl_type, sa_handle_t **handlepp)
1410 {
1411 	dmu_buf_t *db;
1412 	int error;
1413 
1414 	if (error = dmu_bonus_hold(objset, objid, NULL, &db))
1415 		return (error);
1416 
1417 	return (sa_handle_get_from_db(objset, db, userp, hdl_type,
1418 	    handlepp));
1419 }
1420 
1421 int
1422 sa_buf_hold(objset_t *objset, uint64_t obj_num, void *tag, dmu_buf_t **db)
1423 {
1424 	return (dmu_bonus_hold(objset, obj_num, tag, db));
1425 }
1426 
1427 void
1428 sa_buf_rele(dmu_buf_t *db, void *tag)
1429 {
1430 	dmu_buf_rele(db, tag);
1431 }
1432 
1433 int
1434 sa_lookup_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count)
1435 {
1436 	ASSERT(hdl);
1437 	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1438 	return (sa_attr_op(hdl, bulk, count, SA_LOOKUP, NULL));
1439 }
1440 
1441 int
1442 sa_lookup(sa_handle_t *hdl, sa_attr_type_t attr, void *buf, uint32_t buflen)
1443 {
1444 	int error;
1445 	sa_bulk_attr_t bulk;
1446 
1447 	bulk.sa_attr = attr;
1448 	bulk.sa_data = buf;
1449 	bulk.sa_length = buflen;
1450 	bulk.sa_data_func = NULL;
1451 
1452 	ASSERT(hdl);
1453 	mutex_enter(&hdl->sa_lock);
1454 	error = sa_lookup_impl(hdl, &bulk, 1);
1455 	mutex_exit(&hdl->sa_lock);
1456 	return (error);
1457 }
1458 
1459 #ifdef _KERNEL
1460 int
1461 sa_lookup_uio(sa_handle_t *hdl, sa_attr_type_t attr, uio_t *uio)
1462 {
1463 	int error;
1464 	sa_bulk_attr_t bulk;
1465 
1466 	bulk.sa_data = NULL;
1467 	bulk.sa_attr = attr;
1468 	bulk.sa_data_func = NULL;
1469 
1470 	ASSERT(hdl);
1471 
1472 	mutex_enter(&hdl->sa_lock);
1473 	if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) == 0) {
1474 		error = uiomove((void *)bulk.sa_addr, MIN(bulk.sa_size,
1475 		    uio->uio_resid), UIO_READ, uio);
1476 	}
1477 	mutex_exit(&hdl->sa_lock);
1478 	return (error);
1479 
1480 }
1481 #endif
1482 
1483 void *
1484 sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype, void *data)
1485 {
1486 	sa_idx_tab_t *idx_tab;
1487 	sa_hdr_phys_t *hdr = (sa_hdr_phys_t *)data;
1488 	sa_os_t *sa = os->os_sa;
1489 	sa_lot_t *tb, search;
1490 	avl_index_t loc;
1491 
1492 	/*
1493 	 * Deterimine layout number.  If SA node and header == 0 then
1494 	 * force the index table to the dummy "1" empty layout.
1495 	 *
1496 	 * The layout number would only be zero for a newly created file
1497 	 * that has not added any attributes yet, or with crypto enabled which
1498 	 * doesn't write any attributes to the bonus buffer.
1499 	 */
1500 
1501 	search.lot_num = SA_LAYOUT_NUM(hdr, bonustype);
1502 
1503 	tb = avl_find(&sa->sa_layout_num_tree, &search, &loc);
1504 
1505 	/* Verify header size is consistent with layout information */
1506 	ASSERT(tb);
1507 	ASSERT(IS_SA_BONUSTYPE(bonustype) &&
1508 	    SA_HDR_SIZE_MATCH_LAYOUT(hdr, tb) || !IS_SA_BONUSTYPE(bonustype) ||
1509 	    (IS_SA_BONUSTYPE(bonustype) && hdr->sa_layout_info == 0));
1510 
1511 	/*
1512 	 * See if any of the already existing TOC entries can be reused?
1513 	 */
1514 
1515 	for (idx_tab = list_head(&tb->lot_idx_tab); idx_tab;
1516 	    idx_tab = list_next(&tb->lot_idx_tab, idx_tab)) {
1517 		boolean_t valid_idx = B_TRUE;
1518 		int i;
1519 
1520 		if (tb->lot_var_sizes != 0 &&
1521 		    idx_tab->sa_variable_lengths != NULL) {
1522 			for (i = 0; i != tb->lot_var_sizes; i++) {
1523 				if (hdr->sa_lengths[i] !=
1524 				    idx_tab->sa_variable_lengths[i]) {
1525 					valid_idx = B_FALSE;
1526 					break;
1527 				}
1528 			}
1529 		}
1530 		if (valid_idx) {
1531 			sa_idx_tab_hold(os, idx_tab);
1532 			return (idx_tab);
1533 		}
1534 	}
1535 
1536 	/* No such luck, create a new entry */
1537 	idx_tab = kmem_zalloc(sizeof (sa_idx_tab_t), KM_SLEEP);
1538 	idx_tab->sa_idx_tab =
1539 	    kmem_zalloc(sizeof (uint32_t) * sa->sa_num_attrs, KM_SLEEP);
1540 	idx_tab->sa_layout = tb;
1541 	refcount_create(&idx_tab->sa_refcount);
1542 	if (tb->lot_var_sizes)
1543 		idx_tab->sa_variable_lengths = kmem_alloc(sizeof (uint16_t) *
1544 		    tb->lot_var_sizes, KM_SLEEP);
1545 
1546 	sa_attr_iter(os, hdr, bonustype, sa_build_idx_tab,
1547 	    tb, idx_tab);
1548 	sa_idx_tab_hold(os, idx_tab);   /* one hold for consumer */
1549 	sa_idx_tab_hold(os, idx_tab);	/* one for layout */
1550 	list_insert_tail(&tb->lot_idx_tab, idx_tab);
1551 	return (idx_tab);
1552 }
1553 
1554 void
1555 sa_default_locator(void **dataptr, uint32_t *len, uint32_t total_len,
1556     boolean_t start, void *userdata)
1557 {
1558 	ASSERT(start);
1559 
1560 	*dataptr = userdata;
1561 	*len = total_len;
1562 }
1563 
1564 static void
1565 sa_attr_register_sync(sa_handle_t *hdl, dmu_tx_t *tx)
1566 {
1567 	uint64_t attr_value = 0;
1568 	sa_os_t *sa = hdl->sa_os->os_sa;
1569 	sa_attr_table_t *tb = sa->sa_attr_table;
1570 	int i;
1571 
1572 	mutex_enter(&sa->sa_lock);
1573 
1574 	if (!sa->sa_need_attr_registration || sa->sa_master_obj == NULL) {
1575 		mutex_exit(&sa->sa_lock);
1576 		return;
1577 	}
1578 
1579 	if (sa->sa_reg_attr_obj == NULL) {
1580 		sa->sa_reg_attr_obj = zap_create_link(hdl->sa_os,
1581 		    DMU_OT_SA_ATTR_REGISTRATION,
1582 		    sa->sa_master_obj, SA_REGISTRY, tx);
1583 	}
1584 	for (i = 0; i != sa->sa_num_attrs; i++) {
1585 		if (sa->sa_attr_table[i].sa_registered)
1586 			continue;
1587 		ATTR_ENCODE(attr_value, tb[i].sa_attr, tb[i].sa_length,
1588 		    tb[i].sa_byteswap);
1589 		VERIFY(0 == zap_update(hdl->sa_os, sa->sa_reg_attr_obj,
1590 		    tb[i].sa_name, 8, 1, &attr_value, tx));
1591 		tb[i].sa_registered = B_TRUE;
1592 	}
1593 	sa->sa_need_attr_registration = B_FALSE;
1594 	mutex_exit(&sa->sa_lock);
1595 }
1596 
1597 /*
1598  * Replace all attributes with attributes specified in template.
1599  * If dnode had a spill buffer then those attributes will be
1600  * also be replaced, possibly with just an empty spill block
1601  *
1602  * This interface is intended to only be used for bulk adding of
1603  * attributes for a new file.  It will also be used by the ZPL
1604  * when converting and old formatted znode to native SA support.
1605  */
1606 int
1607 sa_replace_all_by_template_locked(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc,
1608     int attr_count, dmu_tx_t *tx)
1609 {
1610 	sa_os_t *sa = hdl->sa_os->os_sa;
1611 
1612 	if (sa->sa_need_attr_registration)
1613 		sa_attr_register_sync(hdl, tx);
1614 	return (sa_build_layouts(hdl, attr_desc, attr_count, tx));
1615 }
1616 
1617 int
1618 sa_replace_all_by_template(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc,
1619     int attr_count, dmu_tx_t *tx)
1620 {
1621 	int error;
1622 
1623 	mutex_enter(&hdl->sa_lock);
1624 	error = sa_replace_all_by_template_locked(hdl, attr_desc,
1625 	    attr_count, tx);
1626 	mutex_exit(&hdl->sa_lock);
1627 	return (error);
1628 }
1629 
1630 /*
1631  * Add/remove a single attribute or replace a variable-sized attribute value
1632  * with a value of a different size, and then rewrite the entire set
1633  * of attributes.
1634  * Same-length attribute value replacement (including fixed-length attributes)
1635  * is handled more efficiently by the upper layers.
1636  */
1637 static int
1638 sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr,
1639     sa_data_op_t action, sa_data_locator_t *locator, void *datastart,
1640     uint16_t buflen, dmu_tx_t *tx)
1641 {
1642 	sa_os_t *sa = hdl->sa_os->os_sa;
1643 	dmu_buf_impl_t *db = (dmu_buf_impl_t *)hdl->sa_bonus;
1644 	dnode_t *dn;
1645 	sa_bulk_attr_t *attr_desc;
1646 	void *old_data[2];
1647 	int bonus_attr_count = 0;
1648 	int bonus_data_size = 0;
1649 	int spill_data_size = 0;
1650 	int spill_attr_count = 0;
1651 	int error;
1652 	uint16_t length, reg_length;
1653 	int i, j, k, length_idx;
1654 	sa_hdr_phys_t *hdr;
1655 	sa_idx_tab_t *idx_tab;
1656 	int attr_count;
1657 	int count;
1658 
1659 	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1660 
1661 	/* First make of copy of the old data */
1662 
1663 	DB_DNODE_ENTER(db);
1664 	dn = DB_DNODE(db);
1665 	if (dn->dn_bonuslen != 0) {
1666 		bonus_data_size = hdl->sa_bonus->db_size;
1667 		old_data[0] = kmem_alloc(bonus_data_size, KM_SLEEP);
1668 		bcopy(hdl->sa_bonus->db_data, old_data[0],
1669 		    hdl->sa_bonus->db_size);
1670 		bonus_attr_count = hdl->sa_bonus_tab->sa_layout->lot_attr_count;
1671 	} else {
1672 		old_data[0] = NULL;
1673 	}
1674 	DB_DNODE_EXIT(db);
1675 
1676 	/* Bring spill buffer online if it isn't currently */
1677 
1678 	if ((error = sa_get_spill(hdl)) == 0) {
1679 		spill_data_size = hdl->sa_spill->db_size;
1680 		old_data[1] = kmem_alloc(spill_data_size, KM_SLEEP);
1681 		bcopy(hdl->sa_spill->db_data, old_data[1],
1682 		    hdl->sa_spill->db_size);
1683 		spill_attr_count =
1684 		    hdl->sa_spill_tab->sa_layout->lot_attr_count;
1685 	} else if (error && error != ENOENT) {
1686 		if (old_data[0])
1687 			kmem_free(old_data[0], bonus_data_size);
1688 		return (error);
1689 	} else {
1690 		old_data[1] = NULL;
1691 	}
1692 
1693 	/* build descriptor of all attributes */
1694 
1695 	attr_count = bonus_attr_count + spill_attr_count;
1696 	if (action == SA_ADD)
1697 		attr_count++;
1698 	else if (action == SA_REMOVE)
1699 		attr_count--;
1700 
1701 	attr_desc = kmem_zalloc(sizeof (sa_bulk_attr_t) * attr_count, KM_SLEEP);
1702 
1703 	/*
1704 	 * loop through bonus and spill buffer if it exists, and
1705 	 * build up new attr_descriptor to reset the attributes
1706 	 */
1707 	k = j = 0;
1708 	count = bonus_attr_count;
1709 	hdr = SA_GET_HDR(hdl, SA_BONUS);
1710 	idx_tab = SA_IDX_TAB_GET(hdl, SA_BONUS);
1711 	for (; k != 2; k++) {
1712 		/*
1713 		 * Iterate over each attribute in layout.  Fetch the
1714 		 * size of variable-length attributes needing rewrite
1715 		 * from sa_lengths[].
1716 		 */
1717 		for (i = 0, length_idx = 0; i != count; i++) {
1718 			sa_attr_type_t attr;
1719 
1720 			attr = idx_tab->sa_layout->lot_attrs[i];
1721 			reg_length = SA_REGISTERED_LEN(sa, attr);
1722 			if (reg_length == 0) {
1723 				length = hdr->sa_lengths[length_idx];
1724 				length_idx++;
1725 			} else {
1726 				length = reg_length;
1727 			}
1728 			if (attr == newattr) {
1729 				/*
1730 				 * There is nothing to do for SA_REMOVE,
1731 				 * so it is just skipped.
1732 				 */
1733 				if (action == SA_REMOVE)
1734 					continue;
1735 
1736 				/*
1737 				 * Duplicate attributes are not allowed, so the
1738 				 * action can not be SA_ADD here.
1739 				 */
1740 				ASSERT3S(action, ==, SA_REPLACE);
1741 
1742 				/*
1743 				 * Only a variable-sized attribute can be
1744 				 * replaced here, and its size must be changing.
1745 				 */
1746 				ASSERT3U(reg_length, ==, 0);
1747 				ASSERT3U(length, !=, buflen);
1748 				SA_ADD_BULK_ATTR(attr_desc, j, attr,
1749 				    locator, datastart, buflen);
1750 			} else {
1751 				SA_ADD_BULK_ATTR(attr_desc, j, attr,
1752 				    NULL, (void *)
1753 				    (TOC_OFF(idx_tab->sa_idx_tab[attr]) +
1754 				    (uintptr_t)old_data[k]), length);
1755 			}
1756 		}
1757 		if (k == 0 && hdl->sa_spill) {
1758 			hdr = SA_GET_HDR(hdl, SA_SPILL);
1759 			idx_tab = SA_IDX_TAB_GET(hdl, SA_SPILL);
1760 			count = spill_attr_count;
1761 		} else {
1762 			break;
1763 		}
1764 	}
1765 	if (action == SA_ADD) {
1766 		reg_length = SA_REGISTERED_LEN(sa, newattr);
1767 		IMPLY(reg_length != 0, reg_length == buflen);
1768 		SA_ADD_BULK_ATTR(attr_desc, j, newattr, locator,
1769 		    datastart, buflen);
1770 	}
1771 	ASSERT3U(j, ==, attr_count);
1772 
1773 	error = sa_build_layouts(hdl, attr_desc, attr_count, tx);
1774 
1775 	if (old_data[0])
1776 		kmem_free(old_data[0], bonus_data_size);
1777 	if (old_data[1])
1778 		kmem_free(old_data[1], spill_data_size);
1779 	kmem_free(attr_desc, sizeof (sa_bulk_attr_t) * attr_count);
1780 
1781 	return (error);
1782 }
1783 
1784 static int
1785 sa_bulk_update_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count,
1786     dmu_tx_t *tx)
1787 {
1788 	int error;
1789 	sa_os_t *sa = hdl->sa_os->os_sa;
1790 	dmu_object_type_t bonustype;
1791 
1792 	bonustype = SA_BONUSTYPE_FROM_DB(SA_GET_DB(hdl, SA_BONUS));
1793 
1794 	ASSERT(hdl);
1795 	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1796 
1797 	/* sync out registration table if necessary */
1798 	if (sa->sa_need_attr_registration)
1799 		sa_attr_register_sync(hdl, tx);
1800 
1801 	error = sa_attr_op(hdl, bulk, count, SA_UPDATE, tx);
1802 	if (error == 0 && !IS_SA_BONUSTYPE(bonustype) && sa->sa_update_cb)
1803 		sa->sa_update_cb(hdl, tx);
1804 
1805 	return (error);
1806 }
1807 
1808 /*
1809  * update or add new attribute
1810  */
1811 int
1812 sa_update(sa_handle_t *hdl, sa_attr_type_t type,
1813     void *buf, uint32_t buflen, dmu_tx_t *tx)
1814 {
1815 	int error;
1816 	sa_bulk_attr_t bulk;
1817 
1818 	bulk.sa_attr = type;
1819 	bulk.sa_data_func = NULL;
1820 	bulk.sa_length = buflen;
1821 	bulk.sa_data = buf;
1822 
1823 	mutex_enter(&hdl->sa_lock);
1824 	error = sa_bulk_update_impl(hdl, &bulk, 1, tx);
1825 	mutex_exit(&hdl->sa_lock);
1826 	return (error);
1827 }
1828 
1829 int
1830 sa_update_from_cb(sa_handle_t *hdl, sa_attr_type_t attr,
1831     uint32_t buflen, sa_data_locator_t *locator, void *userdata, dmu_tx_t *tx)
1832 {
1833 	int error;
1834 	sa_bulk_attr_t bulk;
1835 
1836 	bulk.sa_attr = attr;
1837 	bulk.sa_data = userdata;
1838 	bulk.sa_data_func = locator;
1839 	bulk.sa_length = buflen;
1840 
1841 	mutex_enter(&hdl->sa_lock);
1842 	error = sa_bulk_update_impl(hdl, &bulk, 1, tx);
1843 	mutex_exit(&hdl->sa_lock);
1844 	return (error);
1845 }
1846 
1847 /*
1848  * Return size of an attribute
1849  */
1850 
1851 int
1852 sa_size(sa_handle_t *hdl, sa_attr_type_t attr, int *size)
1853 {
1854 	sa_bulk_attr_t bulk;
1855 	int error;
1856 
1857 	bulk.sa_data = NULL;
1858 	bulk.sa_attr = attr;
1859 	bulk.sa_data_func = NULL;
1860 
1861 	ASSERT(hdl);
1862 	mutex_enter(&hdl->sa_lock);
1863 	if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) != 0) {
1864 		mutex_exit(&hdl->sa_lock);
1865 		return (error);
1866 	}
1867 	*size = bulk.sa_size;
1868 
1869 	mutex_exit(&hdl->sa_lock);
1870 	return (0);
1871 }
1872 
1873 int
1874 sa_bulk_lookup_locked(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count)
1875 {
1876 	ASSERT(hdl);
1877 	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1878 	return (sa_lookup_impl(hdl, attrs, count));
1879 }
1880 
1881 int
1882 sa_bulk_lookup(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count)
1883 {
1884 	int error;
1885 
1886 	ASSERT(hdl);
1887 	mutex_enter(&hdl->sa_lock);
1888 	error = sa_bulk_lookup_locked(hdl, attrs, count);
1889 	mutex_exit(&hdl->sa_lock);
1890 	return (error);
1891 }
1892 
1893 int
1894 sa_bulk_update(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count, dmu_tx_t *tx)
1895 {
1896 	int error;
1897 
1898 	ASSERT(hdl);
1899 	mutex_enter(&hdl->sa_lock);
1900 	error = sa_bulk_update_impl(hdl, attrs, count, tx);
1901 	mutex_exit(&hdl->sa_lock);
1902 	return (error);
1903 }
1904 
1905 int
1906 sa_remove(sa_handle_t *hdl, sa_attr_type_t attr, dmu_tx_t *tx)
1907 {
1908 	int error;
1909 
1910 	mutex_enter(&hdl->sa_lock);
1911 	error = sa_modify_attrs(hdl, attr, SA_REMOVE, NULL,
1912 	    NULL, 0, tx);
1913 	mutex_exit(&hdl->sa_lock);
1914 	return (error);
1915 }
1916 
1917 void
1918 sa_object_info(sa_handle_t *hdl, dmu_object_info_t *doi)
1919 {
1920 	dmu_object_info_from_db((dmu_buf_t *)hdl->sa_bonus, doi);
1921 }
1922 
1923 void
1924 sa_object_size(sa_handle_t *hdl, uint32_t *blksize, u_longlong_t *nblocks)
1925 {
1926 	dmu_object_size_from_db((dmu_buf_t *)hdl->sa_bonus,
1927 	    blksize, nblocks);
1928 }
1929 
1930 void
1931 sa_set_userp(sa_handle_t *hdl, void *ptr)
1932 {
1933 	hdl->sa_userp = ptr;
1934 }
1935 
1936 dmu_buf_t *
1937 sa_get_db(sa_handle_t *hdl)
1938 {
1939 	return ((dmu_buf_t *)hdl->sa_bonus);
1940 }
1941 
1942 void *
1943 sa_get_userdata(sa_handle_t *hdl)
1944 {
1945 	return (hdl->sa_userp);
1946 }
1947 
1948 void
1949 sa_register_update_callback_locked(objset_t *os, sa_update_cb_t *func)
1950 {
1951 	ASSERT(MUTEX_HELD(&os->os_sa->sa_lock));
1952 	os->os_sa->sa_update_cb = func;
1953 }
1954 
1955 void
1956 sa_register_update_callback(objset_t *os, sa_update_cb_t *func)
1957 {
1958 
1959 	mutex_enter(&os->os_sa->sa_lock);
1960 	sa_register_update_callback_locked(os, func);
1961 	mutex_exit(&os->os_sa->sa_lock);
1962 }
1963 
1964 uint64_t
1965 sa_handle_object(sa_handle_t *hdl)
1966 {
1967 	return (hdl->sa_bonus->db_object);
1968 }
1969 
1970 boolean_t
1971 sa_enabled(objset_t *os)
1972 {
1973 	return (os->os_sa == NULL);
1974 }
1975 
1976 int
1977 sa_set_sa_object(objset_t *os, uint64_t sa_object)
1978 {
1979 	sa_os_t *sa = os->os_sa;
1980 
1981 	if (sa->sa_master_obj)
1982 		return (1);
1983 
1984 	sa->sa_master_obj = sa_object;
1985 
1986 	return (0);
1987 }
1988 
1989 int
1990 sa_hdrsize(void *arg)
1991 {
1992 	sa_hdr_phys_t *hdr = arg;
1993 
1994 	return (SA_HDR_SIZE(hdr));
1995 }
1996 
1997 void
1998 sa_handle_lock(sa_handle_t *hdl)
1999 {
2000 	ASSERT(hdl);
2001 	mutex_enter(&hdl->sa_lock);
2002 }
2003 
2004 void
2005 sa_handle_unlock(sa_handle_t *hdl)
2006 {
2007 	ASSERT(hdl);
2008 	mutex_exit(&hdl->sa_lock);
2009 }
2010