xref: /illumos-gate/usr/src/uts/common/fs/zfs/sa.c (revision 3e95bd4ab92abca814bd28e854607d1975c7dc88)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
23  */
24 
25 #include <sys/zfs_context.h>
26 #include <sys/types.h>
27 #include <sys/param.h>
28 #include <sys/systm.h>
29 #include <sys/sysmacros.h>
30 #include <sys/dmu.h>
31 #include <sys/dmu_impl.h>
32 #include <sys/dmu_objset.h>
33 #include <sys/dbuf.h>
34 #include <sys/dnode.h>
35 #include <sys/zap.h>
36 #include <sys/sa.h>
37 #include <sys/sunddi.h>
38 #include <sys/sa_impl.h>
39 #include <sys/dnode.h>
40 #include <sys/errno.h>
41 #include <sys/zfs_context.h>
42 
43 /*
44  * ZFS System attributes:
45  *
46  * A generic mechanism to allow for arbitrary attributes
47  * to be stored in a dnode.  The data will be stored in the bonus buffer of
48  * the dnode and if necessary a special "spill" block will be used to handle
49  * overflow situations.  The spill block will be sized to fit the data
50  * from 512 - 128K.  When a spill block is used the BP (blkptr_t) for the
51  * spill block is stored at the end of the current bonus buffer.  Any
52  * attributes that would be in the way of the blkptr_t will be relocated
53  * into the spill block.
54  *
55  * Attribute registration:
56  *
57  * Stored persistently on a per dataset basis
58  * a mapping between attribute "string" names and their actual attribute
59  * numeric values, length, and byteswap function.  The names are only used
60  * during registration.  All  attributes are known by their unique attribute
61  * id value.  If an attribute can have a variable size then the value
62  * 0 will be used to indicate this.
63  *
64  * Attribute Layout:
65  *
66  * Attribute layouts are a way to compactly store multiple attributes, but
67  * without taking the overhead associated with managing each attribute
68  * individually.  Since you will typically have the same set of attributes
69  * stored in the same order a single table will be used to represent that
70  * layout.  The ZPL for example will usually have only about 10 different
71  * layouts (regular files, device files, symlinks,
72  * regular files + scanstamp, files/dir with extended attributes, and then
73  * you have the possibility of all of those minus ACL, because it would
74  * be kicked out into the spill block)
75  *
76  * Layouts are simply an array of the attributes and their
77  * ordering i.e. [0, 1, 4, 5, 2]
78  *
79  * Each distinct layout is given a unique layout number and that is whats
80  * stored in the header at the beginning of the SA data buffer.
81  *
82  * A layout only covers a single dbuf (bonus or spill).  If a set of
83  * attributes is split up between the bonus buffer and a spill buffer then
84  * two different layouts will be used.  This allows us to byteswap the
85  * spill without looking at the bonus buffer and keeps the on disk format of
86  * the bonus and spill buffer the same.
87  *
88  * Adding a single attribute will cause the entire set of attributes to
89  * be rewritten and could result in a new layout number being constructed
90  * as part of the rewrite if no such layout exists for the new set of
91  * attribues.  The new attribute will be appended to the end of the already
92  * existing attributes.
93  *
94  * Both the attribute registration and attribute layout information are
95  * stored in normal ZAP attributes.  Their should be a small number of
96  * known layouts and the set of attributes is assumed to typically be quite
97  * small.
98  *
99  * The registered attributes and layout "table" information is maintained
100  * in core and a special "sa_os_t" is attached to the objset_t.
101  *
102  * A special interface is provided to allow for quickly applying
103  * a large set of attributes at once.  sa_replace_all_by_template() is
104  * used to set an array of attributes.  This is used by the ZPL when
105  * creating a brand new file.  The template that is passed into the function
106  * specifies the attribute, size for variable length attributes, location of
107  * data and special "data locator" function if the data isn't in a contiguous
108  * location.
109  *
110  * Byteswap implications:
111  * Since the SA attributes are not entirely self describing we can't do
112  * the normal byteswap processing.  The special ZAP layout attribute and
113  * attribute registration attributes define the byteswap function and the
114  * size of the attributes, unless it is variable sized.
115  * The normal ZFS byteswapping infrastructure assumes you don't need
116  * to read any objects in order to do the necessary byteswapping.  Whereas
117  * SA attributes can only be properly byteswapped if the dataset is opened
118  * and the layout/attribute ZAP attributes are available.  Because of this
119  * the SA attributes will be byteswapped when they are first accessed by
120  * the SA code that will read the SA data.
121  */
122 
123 typedef void (sa_iterfunc_t)(void *hdr, void *addr, sa_attr_type_t,
124     uint16_t length, int length_idx, boolean_t, void *userp);
125 
126 static int sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype);
127 static void sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab);
128 static void *sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype,
129     void *data);
130 static void sa_idx_tab_rele(objset_t *os, void *arg);
131 static void sa_copy_data(sa_data_locator_t *func, void *start, void *target,
132     int buflen);
133 static int sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr,
134     sa_data_op_t action, sa_data_locator_t *locator, void *datastart,
135     uint16_t buflen, dmu_tx_t *tx);
136 
137 arc_byteswap_func_t *sa_bswap_table[] = {
138 	byteswap_uint64_array,
139 	byteswap_uint32_array,
140 	byteswap_uint16_array,
141 	byteswap_uint8_array,
142 	zfs_acl_byteswap,
143 };
144 
145 #define	SA_COPY_DATA(f, s, t, l) \
146 	{ \
147 		if (f == NULL) { \
148 			if (l == 8) { \
149 				*(uint64_t *)t = *(uint64_t *)s; \
150 			} else if (l == 16) { \
151 				*(uint64_t *)t = *(uint64_t *)s; \
152 				*(uint64_t *)((uintptr_t)t + 8) = \
153 				    *(uint64_t *)((uintptr_t)s + 8); \
154 			} else { \
155 				bcopy(s, t, l); \
156 			} \
157 		} else \
158 			sa_copy_data(f, s, t, l); \
159 	}
160 
161 /*
162  * This table is fixed and cannot be changed.  Its purpose is to
163  * allow the SA code to work with both old/new ZPL file systems.
164  * It contains the list of legacy attributes.  These attributes aren't
165  * stored in the "attribute" registry zap objects, since older ZPL file systems
166  * won't have the registry.  Only objsets of type ZFS_TYPE_FILESYSTEM will
167  * use this static table.
168  */
169 sa_attr_reg_t sa_legacy_attrs[] = {
170 	{"ZPL_ATIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 0},
171 	{"ZPL_MTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 1},
172 	{"ZPL_CTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 2},
173 	{"ZPL_CRTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 3},
174 	{"ZPL_GEN", sizeof (uint64_t), SA_UINT64_ARRAY, 4},
175 	{"ZPL_MODE", sizeof (uint64_t), SA_UINT64_ARRAY, 5},
176 	{"ZPL_SIZE", sizeof (uint64_t), SA_UINT64_ARRAY, 6},
177 	{"ZPL_PARENT", sizeof (uint64_t), SA_UINT64_ARRAY, 7},
178 	{"ZPL_LINKS", sizeof (uint64_t), SA_UINT64_ARRAY, 8},
179 	{"ZPL_XATTR", sizeof (uint64_t), SA_UINT64_ARRAY, 9},
180 	{"ZPL_RDEV", sizeof (uint64_t), SA_UINT64_ARRAY, 10},
181 	{"ZPL_FLAGS", sizeof (uint64_t), SA_UINT64_ARRAY, 11},
182 	{"ZPL_UID", sizeof (uint64_t), SA_UINT64_ARRAY, 12},
183 	{"ZPL_GID", sizeof (uint64_t), SA_UINT64_ARRAY, 13},
184 	{"ZPL_PAD", sizeof (uint64_t) * 4, SA_UINT64_ARRAY, 14},
185 	{"ZPL_ZNODE_ACL", 88, SA_UINT8_ARRAY, 15},
186 };
187 
188 /*
189  * ZPL legacy layout
190  * This is only used for objects of type DMU_OT_ZNODE
191  */
192 sa_attr_type_t sa_legacy_zpl_layout[] = {
193     0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
194 };
195 
196 /*
197  * Special dummy layout used for buffers with no attributes.
198  */
199 
200 sa_attr_type_t sa_dummy_zpl_layout[] = { 0 };
201 
202 static int sa_legacy_attr_count = 16;
203 static kmem_cache_t *sa_cache = NULL;
204 
205 /*ARGSUSED*/
206 static int
207 sa_cache_constructor(void *buf, void *unused, int kmflag)
208 {
209 	sa_handle_t *hdl = buf;
210 
211 	hdl->sa_bonus_tab = NULL;
212 	hdl->sa_spill_tab = NULL;
213 	hdl->sa_os = NULL;
214 	hdl->sa_userp = NULL;
215 	hdl->sa_bonus = NULL;
216 	hdl->sa_spill = NULL;
217 	mutex_init(&hdl->sa_lock, NULL, MUTEX_DEFAULT, NULL);
218 	return (0);
219 }
220 
221 /*ARGSUSED*/
222 static void
223 sa_cache_destructor(void *buf, void *unused)
224 {
225 	sa_handle_t *hdl = buf;
226 	mutex_destroy(&hdl->sa_lock);
227 }
228 
229 void
230 sa_cache_init(void)
231 {
232 	sa_cache = kmem_cache_create("sa_cache",
233 	    sizeof (sa_handle_t), 0, sa_cache_constructor,
234 	    sa_cache_destructor, NULL, NULL, NULL, 0);
235 }
236 
237 void
238 sa_cache_fini(void)
239 {
240 	if (sa_cache)
241 		kmem_cache_destroy(sa_cache);
242 }
243 
244 static int
245 layout_num_compare(const void *arg1, const void *arg2)
246 {
247 	const sa_lot_t *node1 = arg1;
248 	const sa_lot_t *node2 = arg2;
249 
250 	if (node1->lot_num > node2->lot_num)
251 		return (1);
252 	else if (node1->lot_num < node2->lot_num)
253 		return (-1);
254 	return (0);
255 }
256 
257 static int
258 layout_hash_compare(const void *arg1, const void *arg2)
259 {
260 	const sa_lot_t *node1 = arg1;
261 	const sa_lot_t *node2 = arg2;
262 
263 	if (node1->lot_hash > node2->lot_hash)
264 		return (1);
265 	if (node1->lot_hash < node2->lot_hash)
266 		return (-1);
267 	if (node1->lot_instance > node2->lot_instance)
268 		return (1);
269 	if (node1->lot_instance < node2->lot_instance)
270 		return (-1);
271 	return (0);
272 }
273 
274 boolean_t
275 sa_layout_equal(sa_lot_t *tbf, sa_attr_type_t *attrs, int count)
276 {
277 	int i;
278 
279 	if (count != tbf->lot_attr_count)
280 		return (1);
281 
282 	for (i = 0; i != count; i++) {
283 		if (attrs[i] != tbf->lot_attrs[i])
284 			return (1);
285 	}
286 	return (0);
287 }
288 
289 #define	SA_ATTR_HASH(attr) (zfs_crc64_table[(-1ULL ^ attr) & 0xFF])
290 
291 static uint64_t
292 sa_layout_info_hash(sa_attr_type_t *attrs, int attr_count)
293 {
294 	int i;
295 	uint64_t crc = -1ULL;
296 
297 	for (i = 0; i != attr_count; i++)
298 		crc ^= SA_ATTR_HASH(attrs[i]);
299 
300 	return (crc);
301 }
302 
303 static int
304 sa_get_spill(sa_handle_t *hdl)
305 {
306 	int rc;
307 	if (hdl->sa_spill == NULL) {
308 		if ((rc = dmu_spill_hold_existing(hdl->sa_bonus, NULL,
309 		    &hdl->sa_spill)) == 0)
310 			VERIFY(0 == sa_build_index(hdl, SA_SPILL));
311 	} else {
312 		rc = 0;
313 	}
314 
315 	return (rc);
316 }
317 
318 /*
319  * Main attribute lookup/update function
320  * returns 0 for success or non zero for failures
321  *
322  * Operates on bulk array, first failure will abort further processing
323  */
324 int
325 sa_attr_op(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count,
326     sa_data_op_t data_op, dmu_tx_t *tx)
327 {
328 	sa_os_t *sa = hdl->sa_os->os_sa;
329 	int i;
330 	int error = 0;
331 	sa_buf_type_t buftypes;
332 
333 	buftypes = 0;
334 
335 	ASSERT(count > 0);
336 	for (i = 0; i != count; i++) {
337 		ASSERT(bulk[i].sa_attr <= hdl->sa_os->os_sa->sa_num_attrs);
338 
339 		bulk[i].sa_addr = NULL;
340 		/* First check the bonus buffer */
341 
342 		if (hdl->sa_bonus_tab && TOC_ATTR_PRESENT(
343 		    hdl->sa_bonus_tab->sa_idx_tab[bulk[i].sa_attr])) {
344 			SA_ATTR_INFO(sa, hdl->sa_bonus_tab,
345 			    SA_GET_HDR(hdl, SA_BONUS),
346 			    bulk[i].sa_attr, bulk[i], SA_BONUS, hdl);
347 			if (tx && !(buftypes & SA_BONUS)) {
348 				dmu_buf_will_dirty(hdl->sa_bonus, tx);
349 				buftypes |= SA_BONUS;
350 			}
351 		}
352 		if (bulk[i].sa_addr == NULL &&
353 		    ((error = sa_get_spill(hdl)) == 0)) {
354 			if (TOC_ATTR_PRESENT(
355 			    hdl->sa_spill_tab->sa_idx_tab[bulk[i].sa_attr])) {
356 				SA_ATTR_INFO(sa, hdl->sa_spill_tab,
357 				    SA_GET_HDR(hdl, SA_SPILL),
358 				    bulk[i].sa_attr, bulk[i], SA_SPILL, hdl);
359 				if (tx && !(buftypes & SA_SPILL) &&
360 				    bulk[i].sa_size == bulk[i].sa_length) {
361 					dmu_buf_will_dirty(hdl->sa_spill, tx);
362 					buftypes |= SA_SPILL;
363 				}
364 			}
365 		}
366 		if (error && error != ENOENT) {
367 			return ((error == ECKSUM) ? EIO : error);
368 		}
369 
370 		switch (data_op) {
371 		case SA_LOOKUP:
372 			if (bulk[i].sa_addr == NULL)
373 				return (ENOENT);
374 			if (bulk[i].sa_data) {
375 				SA_COPY_DATA(bulk[i].sa_data_func,
376 				    bulk[i].sa_addr, bulk[i].sa_data,
377 				    bulk[i].sa_size);
378 			}
379 			continue;
380 
381 		case SA_UPDATE:
382 			/* existing rewrite of attr */
383 			if (bulk[i].sa_addr &&
384 			    bulk[i].sa_size == bulk[i].sa_length) {
385 				SA_COPY_DATA(bulk[i].sa_data_func,
386 				    bulk[i].sa_data, bulk[i].sa_addr,
387 				    bulk[i].sa_length);
388 				continue;
389 			} else if (bulk[i].sa_addr) { /* attr size change */
390 				error = sa_modify_attrs(hdl, bulk[i].sa_attr,
391 				    SA_REPLACE, bulk[i].sa_data_func,
392 				    bulk[i].sa_data, bulk[i].sa_length, tx);
393 			} else { /* adding new attribute */
394 				error = sa_modify_attrs(hdl, bulk[i].sa_attr,
395 				    SA_ADD, bulk[i].sa_data_func,
396 				    bulk[i].sa_data, bulk[i].sa_length, tx);
397 			}
398 			if (error)
399 				return (error);
400 			break;
401 		}
402 	}
403 	return (error);
404 }
405 
406 static sa_lot_t *
407 sa_add_layout_entry(objset_t *os, sa_attr_type_t *attrs, int attr_count,
408     uint64_t lot_num, uint64_t hash, boolean_t zapadd, dmu_tx_t *tx)
409 {
410 	sa_os_t *sa = os->os_sa;
411 	sa_lot_t *tb, *findtb;
412 	int i;
413 	avl_index_t loc;
414 
415 	ASSERT(MUTEX_HELD(&sa->sa_lock));
416 	tb = kmem_zalloc(sizeof (sa_lot_t), KM_SLEEP);
417 	tb->lot_attr_count = attr_count;
418 	tb->lot_attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count,
419 	    KM_SLEEP);
420 	bcopy(attrs, tb->lot_attrs, sizeof (sa_attr_type_t) * attr_count);
421 	tb->lot_num = lot_num;
422 	tb->lot_hash = hash;
423 	tb->lot_instance = 0;
424 
425 	if (zapadd) {
426 		char attr_name[8];
427 
428 		if (sa->sa_layout_attr_obj == 0) {
429 			sa->sa_layout_attr_obj = zap_create(os,
430 			    DMU_OT_SA_ATTR_LAYOUTS, DMU_OT_NONE, 0, tx);
431 			VERIFY(zap_add(os, sa->sa_master_obj, SA_LAYOUTS, 8, 1,
432 			    &sa->sa_layout_attr_obj, tx) == 0);
433 		}
434 
435 		(void) snprintf(attr_name, sizeof (attr_name),
436 		    "%d", (int)lot_num);
437 		VERIFY(0 == zap_update(os, os->os_sa->sa_layout_attr_obj,
438 		    attr_name, 2, attr_count, attrs, tx));
439 	}
440 
441 	list_create(&tb->lot_idx_tab, sizeof (sa_idx_tab_t),
442 	    offsetof(sa_idx_tab_t, sa_next));
443 
444 	for (i = 0; i != attr_count; i++) {
445 		if (sa->sa_attr_table[tb->lot_attrs[i]].sa_length == 0)
446 			tb->lot_var_sizes++;
447 	}
448 
449 	avl_add(&sa->sa_layout_num_tree, tb);
450 
451 	/* verify we don't have a hash collision */
452 	if ((findtb = avl_find(&sa->sa_layout_hash_tree, tb, &loc)) != NULL) {
453 		for (; findtb && findtb->lot_hash == hash;
454 		    findtb = AVL_NEXT(&sa->sa_layout_hash_tree, findtb)) {
455 			if (findtb->lot_instance != tb->lot_instance)
456 				break;
457 			tb->lot_instance++;
458 		}
459 	}
460 	avl_add(&sa->sa_layout_hash_tree, tb);
461 	return (tb);
462 }
463 
464 static void
465 sa_find_layout(objset_t *os, uint64_t hash, sa_attr_type_t *attrs,
466     int count, dmu_tx_t *tx, sa_lot_t **lot)
467 {
468 	sa_lot_t *tb, tbsearch;
469 	avl_index_t loc;
470 	sa_os_t *sa = os->os_sa;
471 	boolean_t found = B_FALSE;
472 
473 	mutex_enter(&sa->sa_lock);
474 	tbsearch.lot_hash = hash;
475 	tbsearch.lot_instance = 0;
476 	tb = avl_find(&sa->sa_layout_hash_tree, &tbsearch, &loc);
477 	if (tb) {
478 		for (; tb && tb->lot_hash == hash;
479 		    tb = AVL_NEXT(&sa->sa_layout_hash_tree, tb)) {
480 			if (sa_layout_equal(tb, attrs, count) == 0) {
481 				found = B_TRUE;
482 				break;
483 			}
484 		}
485 	}
486 	if (!found) {
487 		tb = sa_add_layout_entry(os, attrs, count,
488 		    avl_numnodes(&sa->sa_layout_num_tree), hash, B_TRUE, tx);
489 	}
490 	mutex_exit(&sa->sa_lock);
491 	*lot = tb;
492 }
493 
494 static int
495 sa_resize_spill(sa_handle_t *hdl, uint32_t size, dmu_tx_t *tx)
496 {
497 	int error;
498 	uint32_t blocksize;
499 
500 	if (size == 0) {
501 		blocksize = SPA_MINBLOCKSIZE;
502 	} else if (size > SPA_MAXBLOCKSIZE) {
503 		ASSERT(0);
504 		return (EFBIG);
505 	} else {
506 		blocksize = P2ROUNDUP_TYPED(size, SPA_MINBLOCKSIZE, uint32_t);
507 	}
508 
509 	error = dbuf_spill_set_blksz(hdl->sa_spill, blocksize, tx);
510 	ASSERT(error == 0);
511 	return (error);
512 }
513 
514 static void
515 sa_copy_data(sa_data_locator_t *func, void *datastart, void *target, int buflen)
516 {
517 	if (func == NULL) {
518 		bcopy(datastart, target, buflen);
519 	} else {
520 		boolean_t start;
521 		int bytes;
522 		void *dataptr;
523 		void *saptr = target;
524 		uint32_t length;
525 
526 		start = B_TRUE;
527 		bytes = 0;
528 		while (bytes < buflen) {
529 			func(&dataptr, &length, buflen, start, datastart);
530 			bcopy(dataptr, saptr, length);
531 			saptr = (void *)((caddr_t)saptr + length);
532 			bytes += length;
533 			start = B_FALSE;
534 		}
535 	}
536 }
537 
538 /*
539  * Determine several different sizes
540  * first the sa header size
541  * the number of bytes to be stored
542  * if spill would occur the index in the attribute array is returned
543  *
544  * the boolean will_spill will be set when spilling is necessary.  It
545  * is only set when the buftype is SA_BONUS
546  */
547 static int
548 sa_find_sizes(sa_os_t *sa, sa_bulk_attr_t *attr_desc, int attr_count,
549     dmu_buf_t *db, sa_buf_type_t buftype, int *index, int *total,
550     boolean_t *will_spill)
551 {
552 	int var_size = 0;
553 	int i;
554 	int full_space;
555 	int hdrsize;
556 	boolean_t done = B_FALSE;
557 
558 	if (buftype == SA_BONUS && sa->sa_force_spill) {
559 		*total = 0;
560 		*index = 0;
561 		*will_spill = B_TRUE;
562 		return (0);
563 	}
564 
565 	*index = -1;
566 	*total = 0;
567 
568 	if (buftype == SA_BONUS)
569 		*will_spill = B_FALSE;
570 
571 	hdrsize = (SA_BONUSTYPE_FROM_DB(db) == DMU_OT_ZNODE) ? 0 :
572 	    sizeof (sa_hdr_phys_t);
573 
574 	full_space = (buftype == SA_BONUS) ? DN_MAX_BONUSLEN : db->db_size;
575 
576 	for (i = 0; i != attr_count; i++) {
577 		boolean_t is_var_sz;
578 
579 		*total += attr_desc[i].sa_length;
580 		if (done)
581 			goto next;
582 
583 		is_var_sz = (SA_REGISTERED_LEN(sa, attr_desc[i].sa_attr) == 0);
584 		if (is_var_sz) {
585 			var_size++;
586 		}
587 
588 		if (is_var_sz && var_size > 1) {
589 			if (P2ROUNDUP(hdrsize + sizeof (uint16_t), 8) +
590 			    *total < full_space) {
591 				hdrsize += sizeof (uint16_t);
592 			} else {
593 				done = B_TRUE;
594 				*index = i;
595 				if (buftype == SA_BONUS)
596 					*will_spill = B_TRUE;
597 				continue;
598 			}
599 		}
600 
601 		/*
602 		 * find index of where spill *could* occur.
603 		 * Then continue to count of remainder attribute
604 		 * space.  The sum is used later for sizing bonus
605 		 * and spill buffer.
606 		 */
607 		if (buftype == SA_BONUS && *index == -1 &&
608 		    P2ROUNDUP(*total + hdrsize, 8) >
609 		    (full_space - sizeof (blkptr_t))) {
610 			*index = i;
611 			done = B_TRUE;
612 		}
613 
614 next:
615 		if (P2ROUNDUP(*total + hdrsize, 8) > full_space &&
616 		    buftype == SA_BONUS)
617 			*will_spill = B_TRUE;
618 	}
619 
620 	hdrsize = P2ROUNDUP(hdrsize, 8);
621 	return (hdrsize);
622 }
623 
624 #define	BUF_SPACE_NEEDED(total, header) (total + header)
625 
626 /*
627  * Find layout that corresponds to ordering of attributes
628  * If not found a new layout number is created and added to
629  * persistent layout tables.
630  */
631 static int
632 sa_build_layouts(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, int attr_count,
633     dmu_tx_t *tx)
634 {
635 	sa_os_t *sa = hdl->sa_os->os_sa;
636 	uint64_t hash;
637 	sa_buf_type_t buftype;
638 	sa_hdr_phys_t *sahdr;
639 	void *data_start;
640 	int buf_space;
641 	sa_attr_type_t *attrs, *attrs_start;
642 	int i, lot_count;
643 	int hdrsize, spillhdrsize;
644 	int used;
645 	dmu_object_type_t bonustype;
646 	sa_lot_t *lot;
647 	int len_idx;
648 	int spill_used;
649 	boolean_t spilling;
650 
651 	dmu_buf_will_dirty(hdl->sa_bonus, tx);
652 	bonustype = SA_BONUSTYPE_FROM_DB(hdl->sa_bonus);
653 
654 	/* first determine bonus header size and sum of all attributes */
655 	hdrsize = sa_find_sizes(sa, attr_desc, attr_count, hdl->sa_bonus,
656 	    SA_BONUS, &i, &used, &spilling);
657 
658 	if (used > SPA_MAXBLOCKSIZE)
659 		return (EFBIG);
660 
661 	VERIFY(0 == dmu_set_bonus(hdl->sa_bonus, spilling ?
662 	    MIN(DN_MAX_BONUSLEN - sizeof (blkptr_t), used + hdrsize) :
663 	    used + hdrsize, tx));
664 
665 	ASSERT((bonustype == DMU_OT_ZNODE && spilling == 0) ||
666 	    bonustype == DMU_OT_SA);
667 
668 	/* setup and size spill buffer when needed */
669 	if (spilling) {
670 		boolean_t dummy;
671 
672 		if (hdl->sa_spill == NULL) {
673 			VERIFY(dmu_spill_hold_by_bonus(hdl->sa_bonus, NULL,
674 			    &hdl->sa_spill) == 0);
675 		}
676 		dmu_buf_will_dirty(hdl->sa_spill, tx);
677 
678 		spillhdrsize = sa_find_sizes(sa, &attr_desc[i],
679 		    attr_count - i, hdl->sa_spill, SA_SPILL, &i,
680 		    &spill_used, &dummy);
681 
682 		if (spill_used > SPA_MAXBLOCKSIZE)
683 			return (EFBIG);
684 
685 		buf_space = hdl->sa_spill->db_size - spillhdrsize;
686 		if (BUF_SPACE_NEEDED(spill_used, spillhdrsize) >
687 		    hdl->sa_spill->db_size)
688 			VERIFY(0 == sa_resize_spill(hdl,
689 			    BUF_SPACE_NEEDED(spill_used, spillhdrsize), tx));
690 	}
691 
692 	/* setup starting pointers to lay down data */
693 	data_start = (void *)((uintptr_t)hdl->sa_bonus->db_data + hdrsize);
694 	sahdr = (sa_hdr_phys_t *)hdl->sa_bonus->db_data;
695 	buftype = SA_BONUS;
696 
697 	if (spilling)
698 		buf_space = (sa->sa_force_spill) ?
699 		    0 : SA_BLKPTR_SPACE - hdrsize;
700 	else
701 		buf_space = hdl->sa_bonus->db_size - hdrsize;
702 
703 	attrs_start = attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count,
704 	    KM_SLEEP);
705 	lot_count = 0;
706 
707 	for (i = 0, len_idx = 0, hash = -1ULL; i != attr_count; i++) {
708 		uint16_t length;
709 
710 		attrs[i] = attr_desc[i].sa_attr;
711 		length = SA_REGISTERED_LEN(sa, attrs[i]);
712 		if (length == 0)
713 			length = attr_desc[i].sa_length;
714 
715 		if (buf_space < length) {  /* switch to spill buffer */
716 			VERIFY(bonustype == DMU_OT_SA);
717 			if (buftype == SA_BONUS && !sa->sa_force_spill) {
718 				sa_find_layout(hdl->sa_os, hash, attrs_start,
719 				    lot_count, tx, &lot);
720 				SA_SET_HDR(sahdr, lot->lot_num, hdrsize);
721 			}
722 
723 			buftype = SA_SPILL;
724 			hash = -1ULL;
725 			len_idx = 0;
726 
727 			sahdr = (sa_hdr_phys_t *)hdl->sa_spill->db_data;
728 			sahdr->sa_magic = SA_MAGIC;
729 			data_start = (void *)((uintptr_t)sahdr +
730 			    spillhdrsize);
731 			attrs_start = &attrs[i];
732 			buf_space = hdl->sa_spill->db_size - spillhdrsize;
733 			lot_count = 0;
734 		}
735 		hash ^= SA_ATTR_HASH(attrs[i]);
736 		attr_desc[i].sa_addr = data_start;
737 		attr_desc[i].sa_size = length;
738 		SA_COPY_DATA(attr_desc[i].sa_data_func, attr_desc[i].sa_data,
739 		    data_start, length);
740 		if (sa->sa_attr_table[attrs[i]].sa_length == 0) {
741 			sahdr->sa_lengths[len_idx++] = length;
742 		}
743 		data_start = (void *)P2ROUNDUP(((uintptr_t)data_start +
744 		    length), 8);
745 		buf_space -= P2ROUNDUP(length, 8);
746 		lot_count++;
747 	}
748 
749 	sa_find_layout(hdl->sa_os, hash, attrs_start, lot_count, tx, &lot);
750 
751 	/*
752 	 * Verify that old znodes always have layout number 0.
753 	 * Must be DMU_OT_SA for arbitrary layouts
754 	 */
755 	VERIFY((bonustype == DMU_OT_ZNODE && lot->lot_num == 0) ||
756 	    (bonustype == DMU_OT_SA && lot->lot_num > 1));
757 
758 	if (bonustype == DMU_OT_SA) {
759 		SA_SET_HDR(sahdr, lot->lot_num,
760 		    buftype == SA_BONUS ? hdrsize : spillhdrsize);
761 	}
762 
763 	kmem_free(attrs, sizeof (sa_attr_type_t) * attr_count);
764 	if (hdl->sa_bonus_tab) {
765 		sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab);
766 		hdl->sa_bonus_tab = NULL;
767 	}
768 	if (!sa->sa_force_spill)
769 		VERIFY(0 == sa_build_index(hdl, SA_BONUS));
770 	if (hdl->sa_spill) {
771 		sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab);
772 		if (!spilling) {
773 			/*
774 			 * remove spill block that is no longer needed.
775 			 */
776 			dmu_buf_rele(hdl->sa_spill, NULL);
777 			hdl->sa_spill = NULL;
778 			hdl->sa_spill_tab = NULL;
779 			VERIFY(0 == dmu_rm_spill(hdl->sa_os,
780 			    sa_handle_object(hdl), tx));
781 		} else {
782 			VERIFY(0 == sa_build_index(hdl, SA_SPILL));
783 		}
784 	}
785 
786 	return (0);
787 }
788 
789 static void
790 sa_free_attr_table(sa_os_t *sa)
791 {
792 	int i;
793 
794 	if (sa->sa_attr_table == NULL)
795 		return;
796 
797 	for (i = 0; i != sa->sa_num_attrs; i++) {
798 		if (sa->sa_attr_table[i].sa_name)
799 			kmem_free(sa->sa_attr_table[i].sa_name,
800 			    strlen(sa->sa_attr_table[i].sa_name) + 1);
801 	}
802 
803 	kmem_free(sa->sa_attr_table,
804 	    sizeof (sa_attr_table_t) * sa->sa_num_attrs);
805 
806 	sa->sa_attr_table = NULL;
807 }
808 
809 static int
810 sa_attr_table_setup(objset_t *os, sa_attr_reg_t *reg_attrs, int count)
811 {
812 	sa_os_t *sa = os->os_sa;
813 	uint64_t sa_attr_count = 0;
814 	uint64_t sa_reg_count;
815 	int error = 0;
816 	uint64_t attr_value;
817 	sa_attr_table_t *tb;
818 	zap_cursor_t zc;
819 	zap_attribute_t za;
820 	int registered_count = 0;
821 	int i;
822 	dmu_objset_type_t ostype = dmu_objset_type(os);
823 
824 	sa->sa_user_table =
825 	    kmem_zalloc(count * sizeof (sa_attr_type_t), KM_SLEEP);
826 	sa->sa_user_table_sz = count * sizeof (sa_attr_type_t);
827 
828 	if (sa->sa_reg_attr_obj != 0) {
829 		error = zap_count(os, sa->sa_reg_attr_obj,
830 		    &sa_attr_count);
831 
832 		/*
833 		 * Make sure we retrieved a count and that it isn't zero
834 		 */
835 		if (error || (error == 0 && sa_attr_count == 0)) {
836 			if (error == 0)
837 				error = EINVAL;
838 			goto bail;
839 		}
840 		sa_reg_count = sa_attr_count;
841 	}
842 
843 	if (ostype == DMU_OST_ZFS && sa_attr_count == 0)
844 		sa_attr_count += sa_legacy_attr_count;
845 
846 	/* Allocate attribute numbers for attributes that aren't registered */
847 	for (i = 0; i != count; i++) {
848 		boolean_t found = B_FALSE;
849 		int j;
850 
851 		if (ostype == DMU_OST_ZFS) {
852 			for (j = 0; j != sa_legacy_attr_count; j++) {
853 				if (strcmp(reg_attrs[i].sa_name,
854 				    sa_legacy_attrs[j].sa_name) == 0) {
855 					sa->sa_user_table[i] =
856 					    sa_legacy_attrs[j].sa_attr;
857 					found = B_TRUE;
858 				}
859 			}
860 		}
861 		if (found)
862 			continue;
863 
864 		if (sa->sa_reg_attr_obj)
865 			error = zap_lookup(os, sa->sa_reg_attr_obj,
866 			    reg_attrs[i].sa_name, 8, 1, &attr_value);
867 		else
868 			error = ENOENT;
869 		switch (error) {
870 		case ENOENT:
871 			sa->sa_user_table[i] = (sa_attr_type_t)sa_attr_count;
872 			sa_attr_count++;
873 			break;
874 		case 0:
875 			sa->sa_user_table[i] = ATTR_NUM(attr_value);
876 			break;
877 		default:
878 			goto bail;
879 		}
880 	}
881 
882 	sa->sa_num_attrs = sa_attr_count;
883 	tb = sa->sa_attr_table =
884 	    kmem_zalloc(sizeof (sa_attr_table_t) * sa_attr_count, KM_SLEEP);
885 
886 	/*
887 	 * Attribute table is constructed from requested attribute list,
888 	 * previously foreign registered attributes, and also the legacy
889 	 * ZPL set of attributes.
890 	 */
891 
892 	if (sa->sa_reg_attr_obj) {
893 		for (zap_cursor_init(&zc, os, sa->sa_reg_attr_obj);
894 		    (error = zap_cursor_retrieve(&zc, &za)) == 0;
895 		    zap_cursor_advance(&zc)) {
896 			uint64_t value;
897 			value  = za.za_first_integer;
898 
899 			registered_count++;
900 			tb[ATTR_NUM(value)].sa_attr = ATTR_NUM(value);
901 			tb[ATTR_NUM(value)].sa_length = ATTR_LENGTH(value);
902 			tb[ATTR_NUM(value)].sa_byteswap = ATTR_BSWAP(value);
903 			tb[ATTR_NUM(value)].sa_registered = B_TRUE;
904 
905 			if (tb[ATTR_NUM(value)].sa_name) {
906 				continue;
907 			}
908 			tb[ATTR_NUM(value)].sa_name =
909 			    kmem_zalloc(strlen(za.za_name) +1, KM_SLEEP);
910 			(void) strlcpy(tb[ATTR_NUM(value)].sa_name, za.za_name,
911 			    strlen(za.za_name) +1);
912 		}
913 		zap_cursor_fini(&zc);
914 		/*
915 		 * Make sure we processed the correct number of registered
916 		 * attributes
917 		 */
918 		if (registered_count != sa_reg_count) {
919 			ASSERT(error != 0);
920 			goto bail;
921 		}
922 
923 	}
924 
925 	if (ostype == DMU_OST_ZFS) {
926 		for (i = 0; i != sa_legacy_attr_count; i++) {
927 			if (tb[i].sa_name)
928 				continue;
929 			tb[i].sa_attr = sa_legacy_attrs[i].sa_attr;
930 			tb[i].sa_length = sa_legacy_attrs[i].sa_length;
931 			tb[i].sa_byteswap = sa_legacy_attrs[i].sa_byteswap;
932 			tb[i].sa_registered = B_FALSE;
933 			tb[i].sa_name =
934 			    kmem_zalloc(strlen(sa_legacy_attrs[i].sa_name) +1,
935 			    KM_SLEEP);
936 			(void) strlcpy(tb[i].sa_name,
937 			    sa_legacy_attrs[i].sa_name,
938 			    strlen(sa_legacy_attrs[i].sa_name) + 1);
939 		}
940 	}
941 
942 	for (i = 0; i != count; i++) {
943 		sa_attr_type_t attr_id;
944 
945 		attr_id = sa->sa_user_table[i];
946 		if (tb[attr_id].sa_name)
947 			continue;
948 
949 		tb[attr_id].sa_length = reg_attrs[i].sa_length;
950 		tb[attr_id].sa_byteswap = reg_attrs[i].sa_byteswap;
951 		tb[attr_id].sa_attr = attr_id;
952 		tb[attr_id].sa_name =
953 		    kmem_zalloc(strlen(reg_attrs[i].sa_name) + 1, KM_SLEEP);
954 		(void) strlcpy(tb[attr_id].sa_name, reg_attrs[i].sa_name,
955 		    strlen(reg_attrs[i].sa_name) + 1);
956 	}
957 
958 	sa->sa_need_attr_registration =
959 	    (sa_attr_count != registered_count);
960 
961 	return (0);
962 bail:
963 	kmem_free(sa->sa_user_table, count * sizeof (sa_attr_type_t));
964 	sa->sa_user_table = NULL;
965 	sa_free_attr_table(sa);
966 	return ((error != 0) ? error : EINVAL);
967 }
968 
969 int
970 sa_setup(objset_t *os, uint64_t sa_obj, sa_attr_reg_t *reg_attrs, int count,
971     sa_attr_type_t **user_table)
972 {
973 	zap_cursor_t zc;
974 	zap_attribute_t za;
975 	sa_os_t *sa;
976 	dmu_objset_type_t ostype = dmu_objset_type(os);
977 	sa_attr_type_t *tb;
978 	int error;
979 
980 	mutex_enter(&os->os_lock);
981 	if (os->os_sa) {
982 		mutex_enter(&os->os_sa->sa_lock);
983 		mutex_exit(&os->os_lock);
984 		tb = os->os_sa->sa_user_table;
985 		mutex_exit(&os->os_sa->sa_lock);
986 		*user_table = tb;
987 		return (0);
988 	}
989 
990 	sa = kmem_zalloc(sizeof (sa_os_t), KM_SLEEP);
991 	mutex_init(&sa->sa_lock, NULL, MUTEX_DEFAULT, NULL);
992 	sa->sa_master_obj = sa_obj;
993 
994 	os->os_sa = sa;
995 	mutex_enter(&sa->sa_lock);
996 	mutex_exit(&os->os_lock);
997 	avl_create(&sa->sa_layout_num_tree, layout_num_compare,
998 	    sizeof (sa_lot_t), offsetof(sa_lot_t, lot_num_node));
999 	avl_create(&sa->sa_layout_hash_tree, layout_hash_compare,
1000 	    sizeof (sa_lot_t), offsetof(sa_lot_t, lot_hash_node));
1001 
1002 	if (sa_obj) {
1003 		error = zap_lookup(os, sa_obj, SA_LAYOUTS,
1004 		    8, 1, &sa->sa_layout_attr_obj);
1005 		if (error != 0 && error != ENOENT)
1006 			goto fail;
1007 		error = zap_lookup(os, sa_obj, SA_REGISTRY,
1008 		    8, 1, &sa->sa_reg_attr_obj);
1009 		if (error != 0 && error != ENOENT)
1010 			goto fail;
1011 	}
1012 
1013 	if ((error = sa_attr_table_setup(os, reg_attrs, count)) != 0)
1014 		goto fail;
1015 
1016 	if (sa->sa_layout_attr_obj != 0) {
1017 		uint64_t layout_count;
1018 
1019 		error = zap_count(os, sa->sa_layout_attr_obj,
1020 		    &layout_count);
1021 
1022 		/*
1023 		 * Layout number count should be > 0
1024 		 */
1025 		if (error || (error == 0 && layout_count == 0)) {
1026 			if (error == 0)
1027 				error = EINVAL;
1028 			goto fail;
1029 		}
1030 
1031 		for (zap_cursor_init(&zc, os, sa->sa_layout_attr_obj);
1032 		    (error = zap_cursor_retrieve(&zc, &za)) == 0;
1033 		    zap_cursor_advance(&zc)) {
1034 			sa_attr_type_t *lot_attrs;
1035 			uint64_t lot_num;
1036 
1037 			lot_attrs = kmem_zalloc(sizeof (sa_attr_type_t) *
1038 			    za.za_num_integers, KM_SLEEP);
1039 
1040 			if ((error = (zap_lookup(os, sa->sa_layout_attr_obj,
1041 			    za.za_name, 2, za.za_num_integers,
1042 			    lot_attrs))) != 0) {
1043 				kmem_free(lot_attrs, sizeof (sa_attr_type_t) *
1044 				    za.za_num_integers);
1045 				break;
1046 			}
1047 			VERIFY(ddi_strtoull(za.za_name, NULL, 10,
1048 			    (unsigned long long *)&lot_num) == 0);
1049 
1050 			(void) sa_add_layout_entry(os, lot_attrs,
1051 			    za.za_num_integers, lot_num,
1052 			    sa_layout_info_hash(lot_attrs,
1053 			    za.za_num_integers), B_FALSE, NULL);
1054 			kmem_free(lot_attrs, sizeof (sa_attr_type_t) *
1055 			    za.za_num_integers);
1056 		}
1057 		zap_cursor_fini(&zc);
1058 
1059 		/*
1060 		 * Make sure layout count matches number of entries added
1061 		 * to AVL tree
1062 		 */
1063 		if (avl_numnodes(&sa->sa_layout_num_tree) != layout_count) {
1064 			ASSERT(error != 0);
1065 			goto fail;
1066 		}
1067 	}
1068 
1069 	/* Add special layout number for old ZNODES */
1070 	if (ostype == DMU_OST_ZFS) {
1071 		(void) sa_add_layout_entry(os, sa_legacy_zpl_layout,
1072 		    sa_legacy_attr_count, 0,
1073 		    sa_layout_info_hash(sa_legacy_zpl_layout,
1074 		    sa_legacy_attr_count), B_FALSE, NULL);
1075 
1076 		(void) sa_add_layout_entry(os, sa_dummy_zpl_layout, 0, 1,
1077 		    0, B_FALSE, NULL);
1078 	}
1079 	*user_table = os->os_sa->sa_user_table;
1080 	mutex_exit(&sa->sa_lock);
1081 	return (0);
1082 fail:
1083 	os->os_sa = NULL;
1084 	sa_free_attr_table(sa);
1085 	if (sa->sa_user_table)
1086 		kmem_free(sa->sa_user_table, sa->sa_user_table_sz);
1087 	mutex_exit(&sa->sa_lock);
1088 	kmem_free(sa, sizeof (sa_os_t));
1089 	return ((error == ECKSUM) ? EIO : error);
1090 }
1091 
1092 void
1093 sa_tear_down(objset_t *os)
1094 {
1095 	sa_os_t *sa = os->os_sa;
1096 	sa_lot_t *layout;
1097 	void *cookie;
1098 
1099 	kmem_free(sa->sa_user_table, sa->sa_user_table_sz);
1100 
1101 	/* Free up attr table */
1102 
1103 	sa_free_attr_table(sa);
1104 
1105 	cookie = NULL;
1106 	while (layout = avl_destroy_nodes(&sa->sa_layout_hash_tree, &cookie)) {
1107 		sa_idx_tab_t *tab;
1108 		while (tab = list_head(&layout->lot_idx_tab)) {
1109 			ASSERT(refcount_count(&tab->sa_refcount));
1110 			sa_idx_tab_rele(os, tab);
1111 		}
1112 	}
1113 
1114 	cookie = NULL;
1115 	while (layout = avl_destroy_nodes(&sa->sa_layout_num_tree, &cookie)) {
1116 		kmem_free(layout->lot_attrs,
1117 		    sizeof (sa_attr_type_t) * layout->lot_attr_count);
1118 		kmem_free(layout, sizeof (sa_lot_t));
1119 	}
1120 
1121 	avl_destroy(&sa->sa_layout_hash_tree);
1122 	avl_destroy(&sa->sa_layout_num_tree);
1123 
1124 	kmem_free(sa, sizeof (sa_os_t));
1125 	os->os_sa = NULL;
1126 }
1127 
1128 void
1129 sa_build_idx_tab(void *hdr, void *attr_addr, sa_attr_type_t attr,
1130     uint16_t length, int length_idx, boolean_t var_length, void *userp)
1131 {
1132 	sa_idx_tab_t *idx_tab = userp;
1133 
1134 	if (var_length) {
1135 		ASSERT(idx_tab->sa_variable_lengths);
1136 		idx_tab->sa_variable_lengths[length_idx] = length;
1137 	}
1138 	TOC_ATTR_ENCODE(idx_tab->sa_idx_tab[attr], length_idx,
1139 	    (uint32_t)((uintptr_t)attr_addr - (uintptr_t)hdr));
1140 }
1141 
1142 static void
1143 sa_attr_iter(objset_t *os, sa_hdr_phys_t *hdr, dmu_object_type_t type,
1144     sa_iterfunc_t func, sa_lot_t *tab, void *userp)
1145 {
1146 	void *data_start;
1147 	sa_lot_t *tb = tab;
1148 	sa_lot_t search;
1149 	avl_index_t loc;
1150 	sa_os_t *sa = os->os_sa;
1151 	int i;
1152 	uint16_t *length_start = NULL;
1153 	uint8_t length_idx = 0;
1154 
1155 	if (tab == NULL) {
1156 		search.lot_num = SA_LAYOUT_NUM(hdr, type);
1157 		tb = avl_find(&sa->sa_layout_num_tree, &search, &loc);
1158 		ASSERT(tb);
1159 	}
1160 
1161 	if (IS_SA_BONUSTYPE(type)) {
1162 		data_start = (void *)P2ROUNDUP(((uintptr_t)hdr +
1163 		    offsetof(sa_hdr_phys_t, sa_lengths) +
1164 		    (sizeof (uint16_t) * tb->lot_var_sizes)), 8);
1165 		length_start = hdr->sa_lengths;
1166 	} else {
1167 		data_start = hdr;
1168 	}
1169 
1170 	for (i = 0; i != tb->lot_attr_count; i++) {
1171 		int attr_length, reg_length;
1172 		uint8_t idx_len;
1173 
1174 		reg_length = sa->sa_attr_table[tb->lot_attrs[i]].sa_length;
1175 		if (reg_length) {
1176 			attr_length = reg_length;
1177 			idx_len = 0;
1178 		} else {
1179 			attr_length = length_start[length_idx];
1180 			idx_len = length_idx++;
1181 		}
1182 
1183 		func(hdr, data_start, tb->lot_attrs[i], attr_length,
1184 		    idx_len, reg_length == 0 ? B_TRUE : B_FALSE, userp);
1185 
1186 		data_start = (void *)P2ROUNDUP(((uintptr_t)data_start +
1187 		    attr_length), 8);
1188 	}
1189 }
1190 
1191 /*ARGSUSED*/
1192 void
1193 sa_byteswap_cb(void *hdr, void *attr_addr, sa_attr_type_t attr,
1194     uint16_t length, int length_idx, boolean_t variable_length, void *userp)
1195 {
1196 	sa_handle_t *hdl = userp;
1197 	sa_os_t *sa = hdl->sa_os->os_sa;
1198 
1199 	sa_bswap_table[sa->sa_attr_table[attr].sa_byteswap](attr_addr, length);
1200 }
1201 
1202 void
1203 sa_byteswap(sa_handle_t *hdl, sa_buf_type_t buftype)
1204 {
1205 	sa_hdr_phys_t *sa_hdr_phys = SA_GET_HDR(hdl, buftype);
1206 	dmu_buf_impl_t *db;
1207 	sa_os_t *sa = hdl->sa_os->os_sa;
1208 	int num_lengths = 1;
1209 	int i;
1210 
1211 	ASSERT(MUTEX_HELD(&sa->sa_lock));
1212 	if (sa_hdr_phys->sa_magic == SA_MAGIC)
1213 		return;
1214 
1215 	db = SA_GET_DB(hdl, buftype);
1216 
1217 	if (buftype == SA_SPILL) {
1218 		arc_release(db->db_buf, NULL);
1219 		arc_buf_thaw(db->db_buf);
1220 	}
1221 
1222 	sa_hdr_phys->sa_magic = BSWAP_32(sa_hdr_phys->sa_magic);
1223 	sa_hdr_phys->sa_layout_info = BSWAP_16(sa_hdr_phys->sa_layout_info);
1224 
1225 	/*
1226 	 * Determine number of variable lenghts in header
1227 	 * The standard 8 byte header has one for free and a
1228 	 * 16 byte header would have 4 + 1;
1229 	 */
1230 	if (SA_HDR_SIZE(sa_hdr_phys) > 8)
1231 		num_lengths += (SA_HDR_SIZE(sa_hdr_phys) - 8) >> 1;
1232 	for (i = 0; i != num_lengths; i++)
1233 		sa_hdr_phys->sa_lengths[i] =
1234 		    BSWAP_16(sa_hdr_phys->sa_lengths[i]);
1235 
1236 	sa_attr_iter(hdl->sa_os, sa_hdr_phys, DMU_OT_SA,
1237 	    sa_byteswap_cb, NULL, hdl);
1238 
1239 	if (buftype == SA_SPILL)
1240 		arc_buf_freeze(((dmu_buf_impl_t *)hdl->sa_spill)->db_buf);
1241 }
1242 
1243 static int
1244 sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype)
1245 {
1246 	sa_hdr_phys_t *sa_hdr_phys;
1247 	dmu_buf_impl_t *db = SA_GET_DB(hdl, buftype);
1248 	dmu_object_type_t bonustype = SA_BONUSTYPE_FROM_DB(db);
1249 	sa_os_t *sa = hdl->sa_os->os_sa;
1250 	sa_idx_tab_t *idx_tab;
1251 
1252 	sa_hdr_phys = SA_GET_HDR(hdl, buftype);
1253 
1254 	mutex_enter(&sa->sa_lock);
1255 
1256 	/* Do we need to byteswap? */
1257 
1258 	/* only check if not old znode */
1259 	if (IS_SA_BONUSTYPE(bonustype) && sa_hdr_phys->sa_magic != SA_MAGIC &&
1260 	    sa_hdr_phys->sa_magic != 0) {
1261 		VERIFY(BSWAP_32(sa_hdr_phys->sa_magic) == SA_MAGIC);
1262 		sa_byteswap(hdl, buftype);
1263 	}
1264 
1265 	idx_tab = sa_find_idx_tab(hdl->sa_os, bonustype, sa_hdr_phys);
1266 
1267 	if (buftype == SA_BONUS)
1268 		hdl->sa_bonus_tab = idx_tab;
1269 	else
1270 		hdl->sa_spill_tab = idx_tab;
1271 
1272 	mutex_exit(&sa->sa_lock);
1273 	return (0);
1274 }
1275 
1276 /*ARGSUSED*/
1277 void
1278 sa_evict(dmu_buf_t *db, void *sap)
1279 {
1280 	panic("evicting sa dbuf %p\n", (void *)db);
1281 }
1282 
1283 static void
1284 sa_idx_tab_rele(objset_t *os, void *arg)
1285 {
1286 	sa_os_t *sa = os->os_sa;
1287 	sa_idx_tab_t *idx_tab = arg;
1288 
1289 	if (idx_tab == NULL)
1290 		return;
1291 
1292 	mutex_enter(&sa->sa_lock);
1293 	if (refcount_remove(&idx_tab->sa_refcount, NULL) == 0) {
1294 		list_remove(&idx_tab->sa_layout->lot_idx_tab, idx_tab);
1295 		if (idx_tab->sa_variable_lengths)
1296 			kmem_free(idx_tab->sa_variable_lengths,
1297 			    sizeof (uint16_t) *
1298 			    idx_tab->sa_layout->lot_var_sizes);
1299 		refcount_destroy(&idx_tab->sa_refcount);
1300 		kmem_free(idx_tab->sa_idx_tab,
1301 		    sizeof (uint32_t) * sa->sa_num_attrs);
1302 		kmem_free(idx_tab, sizeof (sa_idx_tab_t));
1303 	}
1304 	mutex_exit(&sa->sa_lock);
1305 }
1306 
1307 static void
1308 sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab)
1309 {
1310 	sa_os_t *sa = os->os_sa;
1311 
1312 	ASSERT(MUTEX_HELD(&sa->sa_lock));
1313 	(void) refcount_add(&idx_tab->sa_refcount, NULL);
1314 }
1315 
1316 void
1317 sa_handle_destroy(sa_handle_t *hdl)
1318 {
1319 	mutex_enter(&hdl->sa_lock);
1320 	(void) dmu_buf_update_user((dmu_buf_t *)hdl->sa_bonus, hdl,
1321 	    NULL, NULL, NULL);
1322 
1323 	if (hdl->sa_bonus_tab) {
1324 		sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab);
1325 		hdl->sa_bonus_tab = NULL;
1326 	}
1327 	if (hdl->sa_spill_tab) {
1328 		sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab);
1329 		hdl->sa_spill_tab = NULL;
1330 	}
1331 
1332 	dmu_buf_rele(hdl->sa_bonus, NULL);
1333 
1334 	if (hdl->sa_spill)
1335 		dmu_buf_rele((dmu_buf_t *)hdl->sa_spill, NULL);
1336 	mutex_exit(&hdl->sa_lock);
1337 
1338 	kmem_cache_free(sa_cache, hdl);
1339 }
1340 
1341 int
1342 sa_handle_get_from_db(objset_t *os, dmu_buf_t *db, void *userp,
1343     sa_handle_type_t hdl_type, sa_handle_t **handlepp)
1344 {
1345 	int error = 0;
1346 	dmu_object_info_t doi;
1347 	sa_handle_t *handle;
1348 
1349 #ifdef ZFS_DEBUG
1350 	dmu_object_info_from_db(db, &doi);
1351 	ASSERT(doi.doi_bonus_type == DMU_OT_SA ||
1352 	    doi.doi_bonus_type == DMU_OT_ZNODE);
1353 #endif
1354 	/* find handle, if it exists */
1355 	/* if one doesn't exist then create a new one, and initialize it */
1356 
1357 	handle = (hdl_type == SA_HDL_SHARED) ? dmu_buf_get_user(db) : NULL;
1358 	if (handle == NULL) {
1359 		sa_handle_t *newhandle;
1360 		handle = kmem_cache_alloc(sa_cache, KM_SLEEP);
1361 		handle->sa_userp = userp;
1362 		handle->sa_bonus = db;
1363 		handle->sa_os = os;
1364 		handle->sa_spill = NULL;
1365 
1366 		error = sa_build_index(handle, SA_BONUS);
1367 		newhandle = (hdl_type == SA_HDL_SHARED) ?
1368 		    dmu_buf_set_user_ie(db, handle,
1369 		    NULL, sa_evict) : NULL;
1370 
1371 		if (newhandle != NULL) {
1372 			kmem_cache_free(sa_cache, handle);
1373 			handle = newhandle;
1374 		}
1375 	}
1376 	*handlepp = handle;
1377 
1378 	return (error);
1379 }
1380 
1381 int
1382 sa_handle_get(objset_t *objset, uint64_t objid, void *userp,
1383     sa_handle_type_t hdl_type, sa_handle_t **handlepp)
1384 {
1385 	dmu_buf_t *db;
1386 	int error;
1387 
1388 	if (error = dmu_bonus_hold(objset, objid, NULL, &db))
1389 		return (error);
1390 
1391 	return (sa_handle_get_from_db(objset, db, userp, hdl_type,
1392 	    handlepp));
1393 }
1394 
1395 int
1396 sa_buf_hold(objset_t *objset, uint64_t obj_num, void *tag, dmu_buf_t **db)
1397 {
1398 	return (dmu_bonus_hold(objset, obj_num, tag, db));
1399 }
1400 
1401 void
1402 sa_buf_rele(dmu_buf_t *db, void *tag)
1403 {
1404 	dmu_buf_rele(db, tag);
1405 }
1406 
1407 int
1408 sa_lookup_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count)
1409 {
1410 	ASSERT(hdl);
1411 	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1412 	return (sa_attr_op(hdl, bulk, count, SA_LOOKUP, NULL));
1413 }
1414 
1415 int
1416 sa_lookup(sa_handle_t *hdl, sa_attr_type_t attr, void *buf, uint32_t buflen)
1417 {
1418 	int error;
1419 	sa_bulk_attr_t bulk;
1420 
1421 	bulk.sa_attr = attr;
1422 	bulk.sa_data = buf;
1423 	bulk.sa_length = buflen;
1424 	bulk.sa_data_func = NULL;
1425 
1426 	ASSERT(hdl);
1427 	mutex_enter(&hdl->sa_lock);
1428 	error = sa_lookup_impl(hdl, &bulk, 1);
1429 	mutex_exit(&hdl->sa_lock);
1430 	return (error);
1431 }
1432 
1433 #ifdef _KERNEL
1434 int
1435 sa_lookup_uio(sa_handle_t *hdl, sa_attr_type_t attr, uio_t *uio)
1436 {
1437 	int error;
1438 	sa_bulk_attr_t bulk;
1439 
1440 	bulk.sa_data = NULL;
1441 	bulk.sa_attr = attr;
1442 	bulk.sa_data_func = NULL;
1443 
1444 	ASSERT(hdl);
1445 
1446 	mutex_enter(&hdl->sa_lock);
1447 	if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) == 0) {
1448 		error = uiomove((void *)bulk.sa_addr, MIN(bulk.sa_size,
1449 		    uio->uio_resid), UIO_READ, uio);
1450 	}
1451 	mutex_exit(&hdl->sa_lock);
1452 	return (error);
1453 
1454 }
1455 #endif
1456 
1457 void *
1458 sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype, void *data)
1459 {
1460 	sa_idx_tab_t *idx_tab;
1461 	sa_hdr_phys_t *hdr = (sa_hdr_phys_t *)data;
1462 	sa_os_t *sa = os->os_sa;
1463 	sa_lot_t *tb, search;
1464 	avl_index_t loc;
1465 
1466 	/*
1467 	 * Deterimine layout number.  If SA node and header == 0 then
1468 	 * force the index table to the dummy "1" empty layout.
1469 	 *
1470 	 * The layout number would only be zero for a newly created file
1471 	 * that has not added any attributes yet, or with crypto enabled which
1472 	 * doesn't write any attributes to the bonus buffer.
1473 	 */
1474 
1475 	search.lot_num = SA_LAYOUT_NUM(hdr, bonustype);
1476 
1477 	tb = avl_find(&sa->sa_layout_num_tree, &search, &loc);
1478 
1479 	/* Verify header size is consistent with layout information */
1480 	ASSERT(tb);
1481 	ASSERT(IS_SA_BONUSTYPE(bonustype) &&
1482 	    SA_HDR_SIZE_MATCH_LAYOUT(hdr, tb) || !IS_SA_BONUSTYPE(bonustype) ||
1483 	    (IS_SA_BONUSTYPE(bonustype) && hdr->sa_layout_info == 0));
1484 
1485 	/*
1486 	 * See if any of the already existing TOC entries can be reused?
1487 	 */
1488 
1489 	for (idx_tab = list_head(&tb->lot_idx_tab); idx_tab;
1490 	    idx_tab = list_next(&tb->lot_idx_tab, idx_tab)) {
1491 		boolean_t valid_idx = B_TRUE;
1492 		int i;
1493 
1494 		if (tb->lot_var_sizes != 0 &&
1495 		    idx_tab->sa_variable_lengths != NULL) {
1496 			for (i = 0; i != tb->lot_var_sizes; i++) {
1497 				if (hdr->sa_lengths[i] !=
1498 				    idx_tab->sa_variable_lengths[i]) {
1499 					valid_idx = B_FALSE;
1500 					break;
1501 				}
1502 			}
1503 		}
1504 		if (valid_idx) {
1505 			sa_idx_tab_hold(os, idx_tab);
1506 			return (idx_tab);
1507 		}
1508 	}
1509 
1510 	/* No such luck, create a new entry */
1511 	idx_tab = kmem_zalloc(sizeof (sa_idx_tab_t), KM_SLEEP);
1512 	idx_tab->sa_idx_tab =
1513 	    kmem_zalloc(sizeof (uint32_t) * sa->sa_num_attrs, KM_SLEEP);
1514 	idx_tab->sa_layout = tb;
1515 	refcount_create(&idx_tab->sa_refcount);
1516 	if (tb->lot_var_sizes)
1517 		idx_tab->sa_variable_lengths = kmem_alloc(sizeof (uint16_t) *
1518 		    tb->lot_var_sizes, KM_SLEEP);
1519 
1520 	sa_attr_iter(os, hdr, bonustype, sa_build_idx_tab,
1521 	    tb, idx_tab);
1522 	sa_idx_tab_hold(os, idx_tab);   /* one hold for consumer */
1523 	sa_idx_tab_hold(os, idx_tab);	/* one for layout */
1524 	list_insert_tail(&tb->lot_idx_tab, idx_tab);
1525 	return (idx_tab);
1526 }
1527 
1528 void
1529 sa_default_locator(void **dataptr, uint32_t *len, uint32_t total_len,
1530     boolean_t start, void *userdata)
1531 {
1532 	ASSERT(start);
1533 
1534 	*dataptr = userdata;
1535 	*len = total_len;
1536 }
1537 
1538 static void
1539 sa_attr_register_sync(sa_handle_t *hdl, dmu_tx_t *tx)
1540 {
1541 	uint64_t attr_value = 0;
1542 	sa_os_t *sa = hdl->sa_os->os_sa;
1543 	sa_attr_table_t *tb = sa->sa_attr_table;
1544 	int i;
1545 
1546 	mutex_enter(&sa->sa_lock);
1547 
1548 	if (!sa->sa_need_attr_registration || sa->sa_master_obj == NULL) {
1549 		mutex_exit(&sa->sa_lock);
1550 		return;
1551 	}
1552 
1553 	if (sa->sa_reg_attr_obj == NULL) {
1554 		sa->sa_reg_attr_obj = zap_create(hdl->sa_os,
1555 		    DMU_OT_SA_ATTR_REGISTRATION, DMU_OT_NONE, 0, tx);
1556 		VERIFY(zap_add(hdl->sa_os, sa->sa_master_obj,
1557 		    SA_REGISTRY, 8, 1, &sa->sa_reg_attr_obj, tx) == 0);
1558 	}
1559 	for (i = 0; i != sa->sa_num_attrs; i++) {
1560 		if (sa->sa_attr_table[i].sa_registered)
1561 			continue;
1562 		ATTR_ENCODE(attr_value, tb[i].sa_attr, tb[i].sa_length,
1563 		    tb[i].sa_byteswap);
1564 		VERIFY(0 == zap_update(hdl->sa_os, sa->sa_reg_attr_obj,
1565 		    tb[i].sa_name, 8, 1, &attr_value, tx));
1566 		tb[i].sa_registered = B_TRUE;
1567 	}
1568 	sa->sa_need_attr_registration = B_FALSE;
1569 	mutex_exit(&sa->sa_lock);
1570 }
1571 
1572 /*
1573  * Replace all attributes with attributes specified in template.
1574  * If dnode had a spill buffer then those attributes will be
1575  * also be replaced, possibly with just an empty spill block
1576  *
1577  * This interface is intended to only be used for bulk adding of
1578  * attributes for a new file.  It will also be used by the ZPL
1579  * when converting and old formatted znode to native SA support.
1580  */
1581 int
1582 sa_replace_all_by_template_locked(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc,
1583     int attr_count, dmu_tx_t *tx)
1584 {
1585 	sa_os_t *sa = hdl->sa_os->os_sa;
1586 
1587 	if (sa->sa_need_attr_registration)
1588 		sa_attr_register_sync(hdl, tx);
1589 	return (sa_build_layouts(hdl, attr_desc, attr_count, tx));
1590 }
1591 
1592 int
1593 sa_replace_all_by_template(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc,
1594     int attr_count, dmu_tx_t *tx)
1595 {
1596 	int error;
1597 
1598 	mutex_enter(&hdl->sa_lock);
1599 	error = sa_replace_all_by_template_locked(hdl, attr_desc,
1600 	    attr_count, tx);
1601 	mutex_exit(&hdl->sa_lock);
1602 	return (error);
1603 }
1604 
1605 /*
1606  * add/remove/replace a single attribute and then rewrite the entire set
1607  * of attributes.
1608  */
1609 static int
1610 sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr,
1611     sa_data_op_t action, sa_data_locator_t *locator, void *datastart,
1612     uint16_t buflen, dmu_tx_t *tx)
1613 {
1614 	sa_os_t *sa = hdl->sa_os->os_sa;
1615 	sa_bulk_attr_t *attr_desc;
1616 	void *old_data[2];
1617 	int bonus_attr_count = 0;
1618 	int bonus_data_size, spill_data_size;
1619 	int spill_attr_count = 0;
1620 	int error;
1621 	uint16_t length;
1622 	int i, j, k, length_idx;
1623 	sa_hdr_phys_t *hdr;
1624 	sa_idx_tab_t *idx_tab;
1625 	int attr_count;
1626 	int count;
1627 
1628 	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1629 
1630 	/* First make of copy of the old data */
1631 
1632 	if (((dmu_buf_impl_t *)hdl->sa_bonus)->db_dnode->dn_bonuslen) {
1633 		bonus_data_size = hdl->sa_bonus->db_size;
1634 		old_data[0] = kmem_alloc(bonus_data_size, KM_SLEEP);
1635 		bcopy(hdl->sa_bonus->db_data, old_data[0],
1636 		    hdl->sa_bonus->db_size);
1637 		bonus_attr_count = hdl->sa_bonus_tab->sa_layout->lot_attr_count;
1638 	} else {
1639 		old_data[0] = NULL;
1640 	}
1641 
1642 	/* Bring spill buffer online if it isn't currently */
1643 
1644 	if ((error = sa_get_spill(hdl)) == 0) {
1645 		spill_data_size = hdl->sa_spill->db_size;
1646 		old_data[1] = kmem_alloc(spill_data_size, KM_SLEEP);
1647 		bcopy(hdl->sa_spill->db_data, old_data[1],
1648 		    hdl->sa_spill->db_size);
1649 		spill_attr_count =
1650 		    hdl->sa_spill_tab->sa_layout->lot_attr_count;
1651 	} else if (error && error != ENOENT) {
1652 		if (old_data[0])
1653 			kmem_free(old_data[0], bonus_data_size);
1654 		return (error);
1655 	} else {
1656 		old_data[1] = NULL;
1657 	}
1658 
1659 	/* build descriptor of all attributes */
1660 
1661 	attr_count = bonus_attr_count + spill_attr_count;
1662 	if (action == SA_ADD)
1663 		attr_count++;
1664 	else if (action == SA_REMOVE)
1665 		attr_count--;
1666 
1667 	attr_desc = kmem_zalloc(sizeof (sa_bulk_attr_t) * attr_count, KM_SLEEP);
1668 
1669 	/*
1670 	 * loop through bonus and spill buffer if it exists, and
1671 	 * build up new attr_descriptor to reset the attributes
1672 	 */
1673 	k = j = 0;
1674 	count = bonus_attr_count;
1675 	hdr = SA_GET_HDR(hdl, SA_BONUS);
1676 	idx_tab = SA_IDX_TAB_GET(hdl, SA_BONUS);
1677 	for (; k != 2; k++) {
1678 		/* iterate over each attribute in layout */
1679 		for (i = 0, length_idx = 0; i != count; i++) {
1680 			sa_attr_type_t attr;
1681 
1682 			attr = idx_tab->sa_layout->lot_attrs[i];
1683 			if (attr == newattr) {
1684 				if (action == SA_REMOVE) {
1685 					j++;
1686 					continue;
1687 				}
1688 				ASSERT(SA_REGISTERED_LEN(sa, attr) == 0);
1689 				ASSERT(action == SA_REPLACE);
1690 				SA_ADD_BULK_ATTR(attr_desc, j, attr,
1691 				    locator, datastart, buflen);
1692 			} else {
1693 				length = SA_REGISTERED_LEN(sa, attr);
1694 				if (length == 0) {
1695 					length = hdr->sa_lengths[length_idx++];
1696 				}
1697 
1698 				SA_ADD_BULK_ATTR(attr_desc, j, attr,
1699 				    NULL, (void *)
1700 				    (TOC_OFF(idx_tab->sa_idx_tab[attr]) +
1701 				    (uintptr_t)old_data[k]), length);
1702 			}
1703 		}
1704 		if (k == 0 && hdl->sa_spill) {
1705 			hdr = SA_GET_HDR(hdl, SA_SPILL);
1706 			idx_tab = SA_IDX_TAB_GET(hdl, SA_SPILL);
1707 			count = spill_attr_count;
1708 		} else {
1709 			break;
1710 		}
1711 	}
1712 	if (action == SA_ADD) {
1713 		length = SA_REGISTERED_LEN(sa, newattr);
1714 		if (length == 0) {
1715 			length = buflen;
1716 		}
1717 		SA_ADD_BULK_ATTR(attr_desc, j, newattr, locator,
1718 		    datastart, buflen);
1719 	}
1720 
1721 	error = sa_build_layouts(hdl, attr_desc, attr_count, tx);
1722 
1723 	if (old_data[0])
1724 		kmem_free(old_data[0], bonus_data_size);
1725 	if (old_data[1])
1726 		kmem_free(old_data[1], spill_data_size);
1727 	kmem_free(attr_desc, sizeof (sa_bulk_attr_t) * attr_count);
1728 
1729 	return (error);
1730 }
1731 
1732 static int
1733 sa_bulk_update_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count,
1734     dmu_tx_t *tx)
1735 {
1736 	int error;
1737 	sa_os_t *sa = hdl->sa_os->os_sa;
1738 	dmu_object_type_t bonustype;
1739 
1740 	bonustype = SA_BONUSTYPE_FROM_DB(SA_GET_DB(hdl, SA_BONUS));
1741 
1742 	ASSERT(hdl);
1743 	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1744 
1745 	/* sync out registration table if necessary */
1746 	if (sa->sa_need_attr_registration)
1747 		sa_attr_register_sync(hdl, tx);
1748 
1749 	error = sa_attr_op(hdl, bulk, count, SA_UPDATE, tx);
1750 	if (error == 0 && !IS_SA_BONUSTYPE(bonustype) && sa->sa_update_cb)
1751 		sa->sa_update_cb(hdl, tx);
1752 
1753 	return (error);
1754 }
1755 
1756 /*
1757  * update or add new attribute
1758  */
1759 int
1760 sa_update(sa_handle_t *hdl, sa_attr_type_t type,
1761     void *buf, uint32_t buflen, dmu_tx_t *tx)
1762 {
1763 	int error;
1764 	sa_bulk_attr_t bulk;
1765 
1766 	bulk.sa_attr = type;
1767 	bulk.sa_data_func = NULL;
1768 	bulk.sa_length = buflen;
1769 	bulk.sa_data = buf;
1770 
1771 	mutex_enter(&hdl->sa_lock);
1772 	error = sa_bulk_update_impl(hdl, &bulk, 1, tx);
1773 	mutex_exit(&hdl->sa_lock);
1774 	return (error);
1775 }
1776 
1777 int
1778 sa_update_from_cb(sa_handle_t *hdl, sa_attr_type_t attr,
1779     uint32_t buflen, sa_data_locator_t *locator, void *userdata, dmu_tx_t *tx)
1780 {
1781 	int error;
1782 	sa_bulk_attr_t bulk;
1783 
1784 	bulk.sa_attr = attr;
1785 	bulk.sa_data = userdata;
1786 	bulk.sa_data_func = locator;
1787 	bulk.sa_length = buflen;
1788 
1789 	mutex_enter(&hdl->sa_lock);
1790 	error = sa_bulk_update_impl(hdl, &bulk, 1, tx);
1791 	mutex_exit(&hdl->sa_lock);
1792 	return (error);
1793 }
1794 
1795 /*
1796  * Return size of an attribute
1797  */
1798 
1799 int
1800 sa_size(sa_handle_t *hdl, sa_attr_type_t attr, int *size)
1801 {
1802 	sa_bulk_attr_t bulk;
1803 	int error;
1804 
1805 	bulk.sa_data = NULL;
1806 	bulk.sa_attr = attr;
1807 	bulk.sa_data_func = NULL;
1808 
1809 	ASSERT(hdl);
1810 	mutex_enter(&hdl->sa_lock);
1811 	if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) != 0) {
1812 		mutex_exit(&hdl->sa_lock);
1813 		return (error);
1814 	}
1815 	*size = bulk.sa_size;
1816 
1817 	mutex_exit(&hdl->sa_lock);
1818 	return (0);
1819 }
1820 
1821 int
1822 sa_bulk_lookup_locked(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count)
1823 {
1824 	ASSERT(hdl);
1825 	ASSERT(MUTEX_HELD(&hdl->sa_lock));
1826 	return (sa_lookup_impl(hdl, attrs, count));
1827 }
1828 
1829 int
1830 sa_bulk_lookup(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count)
1831 {
1832 	int error;
1833 
1834 	ASSERT(hdl);
1835 	mutex_enter(&hdl->sa_lock);
1836 	error = sa_bulk_lookup_locked(hdl, attrs, count);
1837 	mutex_exit(&hdl->sa_lock);
1838 	return (error);
1839 }
1840 
1841 int
1842 sa_bulk_update(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count, dmu_tx_t *tx)
1843 {
1844 	int error;
1845 
1846 	ASSERT(hdl);
1847 	mutex_enter(&hdl->sa_lock);
1848 	error = sa_bulk_update_impl(hdl, attrs, count, tx);
1849 	mutex_exit(&hdl->sa_lock);
1850 	return (error);
1851 }
1852 
1853 int
1854 sa_remove(sa_handle_t *hdl, sa_attr_type_t attr, dmu_tx_t *tx)
1855 {
1856 	int error;
1857 
1858 	mutex_enter(&hdl->sa_lock);
1859 	error = sa_modify_attrs(hdl, attr, SA_REMOVE, NULL,
1860 	    NULL, 0, tx);
1861 	mutex_exit(&hdl->sa_lock);
1862 	return (error);
1863 }
1864 
1865 void
1866 sa_object_info(sa_handle_t *hdl, dmu_object_info_t *doi)
1867 {
1868 	dmu_object_info_from_db((dmu_buf_t *)hdl->sa_bonus, doi);
1869 }
1870 
1871 void
1872 sa_object_size(sa_handle_t *hdl, uint32_t *blksize, u_longlong_t *nblocks)
1873 {
1874 	dmu_object_size_from_db((dmu_buf_t *)hdl->sa_bonus,
1875 	    blksize, nblocks);
1876 }
1877 
1878 void
1879 sa_update_user(sa_handle_t *newhdl, sa_handle_t *oldhdl)
1880 {
1881 	(void) dmu_buf_update_user((dmu_buf_t *)newhdl->sa_bonus,
1882 	    oldhdl, newhdl, NULL, sa_evict);
1883 	oldhdl->sa_bonus = NULL;
1884 }
1885 
1886 void
1887 sa_set_userp(sa_handle_t *hdl, void *ptr)
1888 {
1889 	hdl->sa_userp = ptr;
1890 }
1891 
1892 dmu_buf_t *
1893 sa_get_db(sa_handle_t *hdl)
1894 {
1895 	return ((dmu_buf_t *)hdl->sa_bonus);
1896 }
1897 
1898 void *
1899 sa_get_userdata(sa_handle_t *hdl)
1900 {
1901 	return (hdl->sa_userp);
1902 }
1903 
1904 void
1905 sa_register_update_callback_locked(objset_t *os, sa_update_cb_t *func)
1906 {
1907 	ASSERT(MUTEX_HELD(&os->os_sa->sa_lock));
1908 	os->os_sa->sa_update_cb = func;
1909 }
1910 
1911 void
1912 sa_register_update_callback(objset_t *os, sa_update_cb_t *func)
1913 {
1914 
1915 	mutex_enter(&os->os_sa->sa_lock);
1916 	sa_register_update_callback_locked(os, func);
1917 	mutex_exit(&os->os_sa->sa_lock);
1918 }
1919 
1920 uint64_t
1921 sa_handle_object(sa_handle_t *hdl)
1922 {
1923 	return (hdl->sa_bonus->db_object);
1924 }
1925 
1926 boolean_t
1927 sa_enabled(objset_t *os)
1928 {
1929 	return (os->os_sa == NULL);
1930 }
1931 
1932 int
1933 sa_set_sa_object(objset_t *os, uint64_t sa_object)
1934 {
1935 	sa_os_t *sa = os->os_sa;
1936 
1937 	if (sa->sa_master_obj)
1938 		return (1);
1939 
1940 	sa->sa_master_obj = sa_object;
1941 
1942 	return (0);
1943 }
1944 
1945 int
1946 sa_hdrsize(void *arg)
1947 {
1948 	sa_hdr_phys_t *hdr = arg;
1949 
1950 	return (SA_HDR_SIZE(hdr));
1951 }
1952 
1953 void
1954 sa_handle_lock(sa_handle_t *hdl)
1955 {
1956 	ASSERT(hdl);
1957 	mutex_enter(&hdl->sa_lock);
1958 }
1959 
1960 void
1961 sa_handle_unlock(sa_handle_t *hdl)
1962 {
1963 	ASSERT(hdl);
1964 	mutex_exit(&hdl->sa_lock);
1965 }
1966