1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved. 24 * Copyright 2017 Nexenta Systems, Inc. All rights reserved. 25 */ 26 27 #include <sys/sdt.h> 28 #include <smbsrv/smb_kproto.h> 29 #include <smbsrv/smb_fsops.h> 30 #include <smbsrv/netbios.h> 31 32 33 static int smb_write_truncate(smb_request_t *, smb_rw_param_t *); 34 35 36 /* 37 * Write count bytes at the specified offset in a file. The offset is 38 * limited to 32-bits. If the count is zero, the file is truncated to 39 * the length specified by the offset. 40 * 41 * The response count indicates the actual number of bytes written, which 42 * will equal the requested count on success. If request and response 43 * counts differ but there is no error, the client will assume that the 44 * server encountered a resource issue. 45 */ 46 smb_sdrc_t 47 smb_pre_write(smb_request_t *sr) 48 { 49 smb_rw_param_t *param; 50 uint32_t off; 51 uint16_t count; 52 int rc; 53 54 param = kmem_zalloc(sizeof (smb_rw_param_t), KM_SLEEP); 55 sr->arg.rw = param; 56 param->rw_magic = SMB_RW_MAGIC; 57 58 rc = smbsr_decode_vwv(sr, "wwl", &sr->smb_fid, &count, &off); 59 60 param->rw_count = (uint32_t)count; 61 param->rw_offset = (uint64_t)off; 62 param->rw_vdb.vdb_uio.uio_loffset = (offset_t)param->rw_offset; 63 64 DTRACE_SMB_START(op__Write, smb_request_t *, sr); /* arg.rw */ 65 66 return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); 67 } 68 69 void 70 smb_post_write(smb_request_t *sr) 71 { 72 DTRACE_SMB_DONE(op__Write, smb_request_t *, sr); /* arg.rw */ 73 74 kmem_free(sr->arg.rw, sizeof (smb_rw_param_t)); 75 } 76 77 smb_sdrc_t 78 smb_com_write(smb_request_t *sr) 79 { 80 smb_rw_param_t *param = sr->arg.rw; 81 int rc; 82 83 smbsr_lookup_file(sr); 84 if (sr->fid_ofile == NULL) { 85 smbsr_error(sr, NT_STATUS_INVALID_HANDLE, ERRDOS, ERRbadfid); 86 return (SDRC_ERROR); 87 } 88 89 sr->user_cr = smb_ofile_getcred(sr->fid_ofile); 90 91 if (param->rw_count == 0) { 92 rc = smb_write_truncate(sr, param); 93 } else { 94 rc = smbsr_decode_data(sr, "D", ¶m->rw_vdb); 95 96 if ((rc != 0) || (param->rw_vdb.vdb_len != param->rw_count)) { 97 smbsr_error(sr, NT_STATUS_INVALID_PARAMETER, 98 ERRDOS, ERROR_INVALID_PARAMETER); 99 return (SDRC_ERROR); 100 } 101 102 param->rw_vdb.vdb_uio.uio_loffset = (offset_t)param->rw_offset; 103 104 rc = smb_common_write(sr, param); 105 } 106 107 if (rc != 0) { 108 if (sr->smb_error.status != NT_STATUS_FILE_LOCK_CONFLICT) 109 smbsr_errno(sr, rc); 110 return (SDRC_ERROR); 111 } 112 113 rc = smbsr_encode_result(sr, 1, 0, "bww", 1, 114 (uint16_t)param->rw_count, 0); 115 return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); 116 } 117 118 /* 119 * Write count bytes to a file and then close the file. This function 120 * can only be used to write to 32-bit offsets and the client must set 121 * WordCount (6 or 12) correctly in order to locate the data to be 122 * written. If an error occurs on the write, the file should still be 123 * closed. If Count is 0, the file is truncated (or extended) to offset. 124 * 125 * If the last_write time is non-zero, last_write should be used to set 126 * the mtime. Otherwise the file system stamps the mtime. Failure to 127 * set mtime should not result in an error response. 128 */ 129 smb_sdrc_t 130 smb_pre_write_and_close(smb_request_t *sr) 131 { 132 smb_rw_param_t *param; 133 uint32_t off; 134 uint16_t count; 135 int rc; 136 137 param = kmem_zalloc(sizeof (smb_rw_param_t), KM_SLEEP); 138 sr->arg.rw = param; 139 param->rw_magic = SMB_RW_MAGIC; 140 141 if (sr->smb_wct == 12) { 142 rc = smbsr_decode_vwv(sr, "wwll12.", &sr->smb_fid, 143 &count, &off, ¶m->rw_last_write); 144 } else { 145 rc = smbsr_decode_vwv(sr, "wwll", &sr->smb_fid, 146 &count, &off, ¶m->rw_last_write); 147 } 148 149 param->rw_count = (uint32_t)count; 150 param->rw_offset = (uint64_t)off; 151 152 DTRACE_SMB_START(op__WriteAndClose, smb_request_t *, sr); /* arg.rw */ 153 154 return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); 155 } 156 157 void 158 smb_post_write_and_close(smb_request_t *sr) 159 { 160 DTRACE_SMB_DONE(op__WriteAndClose, smb_request_t *, sr); /* arg.rw */ 161 162 kmem_free(sr->arg.rw, sizeof (smb_rw_param_t)); 163 } 164 165 smb_sdrc_t 166 smb_com_write_and_close(smb_request_t *sr) 167 { 168 smb_rw_param_t *param = sr->arg.rw; 169 uint16_t count; 170 int rc = 0; 171 172 smbsr_lookup_file(sr); 173 if (sr->fid_ofile == NULL) { 174 smbsr_error(sr, NT_STATUS_INVALID_HANDLE, ERRDOS, ERRbadfid); 175 return (SDRC_ERROR); 176 } 177 178 sr->user_cr = smb_ofile_getcred(sr->fid_ofile); 179 180 if (param->rw_count == 0) { 181 rc = smb_write_truncate(sr, param); 182 } else { 183 /* 184 * There may be a bug here: should this be "3.#B"? 185 */ 186 rc = smbsr_decode_data(sr, ".#B", param->rw_count, 187 ¶m->rw_vdb); 188 189 if ((rc != 0) || (param->rw_vdb.vdb_len != param->rw_count)) { 190 smbsr_error(sr, NT_STATUS_INVALID_PARAMETER, 191 ERRDOS, ERROR_INVALID_PARAMETER); 192 return (SDRC_ERROR); 193 } 194 195 param->rw_vdb.vdb_uio.uio_loffset = (offset_t)param->rw_offset; 196 197 rc = smb_common_write(sr, param); 198 } 199 200 if (rc != 0) { 201 if (sr->smb_error.status != NT_STATUS_FILE_LOCK_CONFLICT) 202 smbsr_errno(sr, rc); 203 return (SDRC_ERROR); 204 } 205 206 smb_ofile_close(sr->fid_ofile, param->rw_last_write); 207 208 count = (uint16_t)param->rw_count; 209 rc = smbsr_encode_result(sr, 1, 0, "bww", 1, count, 0); 210 return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); 211 } 212 213 /* 214 * Write count bytes to a file at the specified offset and then unlock 215 * them. Write behind is safe because the client should have the range 216 * locked and this request is allowed to extend the file - note that 217 * offset is limited to 32-bits. 218 * 219 * Spec advice: it is an error for count to be zero. For compatibility, 220 * we take no action and return success. 221 * 222 * The SmbLockAndRead/SmbWriteAndUnlock sub-dialect is only valid on disk 223 * files. Reject any attempt to use it on other shares. 224 * 225 * The response count indicates the actual number of bytes written, which 226 * will equal the requested count on success. If request and response 227 * counts differ but there is no error, the client will assume that the 228 * server encountered a resource issue. 229 */ 230 smb_sdrc_t 231 smb_pre_write_and_unlock(smb_request_t *sr) 232 { 233 smb_rw_param_t *param; 234 uint32_t off; 235 uint16_t count; 236 uint16_t remcnt; 237 int rc; 238 239 param = kmem_zalloc(sizeof (smb_rw_param_t), KM_SLEEP); 240 sr->arg.rw = param; 241 param->rw_magic = SMB_RW_MAGIC; 242 243 rc = smbsr_decode_vwv(sr, "wwlw", &sr->smb_fid, &count, &off, &remcnt); 244 245 param->rw_count = (uint32_t)count; 246 param->rw_offset = (uint64_t)off; 247 248 DTRACE_SMB_START(op__WriteAndUnlock, smb_request_t *, sr); /* arg.rw */ 249 250 return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); 251 } 252 253 void 254 smb_post_write_and_unlock(smb_request_t *sr) 255 { 256 DTRACE_SMB_DONE(op__WriteAndUnlock, smb_request_t *, sr); /* arg.rw */ 257 258 kmem_free(sr->arg.rw, sizeof (smb_rw_param_t)); 259 } 260 261 smb_sdrc_t 262 smb_com_write_and_unlock(smb_request_t *sr) 263 { 264 smb_rw_param_t *param = sr->arg.rw; 265 uint32_t lk_pid; 266 uint32_t status; 267 int rc = 0; 268 269 if (STYPE_ISDSK(sr->tid_tree->t_res_type) == 0) { 270 smbsr_error(sr, NT_STATUS_ACCESS_DENIED, ERRDOS, ERRnoaccess); 271 return (SDRC_ERROR); 272 } 273 274 smbsr_lookup_file(sr); 275 if (sr->fid_ofile == NULL) { 276 smbsr_error(sr, NT_STATUS_INVALID_HANDLE, ERRDOS, ERRbadfid); 277 return (SDRC_ERROR); 278 } 279 280 sr->user_cr = smb_ofile_getcred(sr->fid_ofile); 281 282 if (param->rw_count == 0) { 283 rc = smbsr_encode_result(sr, 1, 0, "bww", 1, 0, 0); 284 return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); 285 } 286 287 288 rc = smbsr_decode_data(sr, "D", ¶m->rw_vdb); 289 290 if ((rc != 0) || (param->rw_count != param->rw_vdb.vdb_len)) { 291 smbsr_error(sr, NT_STATUS_INVALID_PARAMETER, 292 ERRDOS, ERROR_INVALID_PARAMETER); 293 return (SDRC_ERROR); 294 } 295 296 param->rw_vdb.vdb_uio.uio_loffset = (offset_t)param->rw_offset; 297 298 if ((rc = smb_common_write(sr, param)) != 0) { 299 if (sr->smb_error.status != NT_STATUS_FILE_LOCK_CONFLICT) 300 smbsr_errno(sr, rc); 301 return (SDRC_ERROR); 302 } 303 304 305 /* Note: SMB1 locking uses 16-bit PIDs. */ 306 lk_pid = sr->smb_pid & 0xFFFF; 307 308 status = smb_unlock_range(sr, param->rw_offset, 309 (uint64_t)param->rw_count, lk_pid); 310 if (status != NT_STATUS_SUCCESS) { 311 smbsr_error(sr, NT_STATUS_RANGE_NOT_LOCKED, 312 ERRDOS, ERROR_NOT_LOCKED); 313 return (SDRC_ERROR); 314 } 315 316 rc = smbsr_encode_result(sr, 1, 0, "bww", 1, 317 (uint16_t)param->rw_count, 0); 318 return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); 319 } 320 321 /* 322 * The SMB_COM_WRITE_RAW protocol was a negotiated option introduced in 323 * SMB Core Plus to maximize performance when writing a large block 324 * of data to a server. It's obsolete and no longer supported. 325 * 326 * We keep a handler for it so the dtrace provider can see if 327 * the client tried to use this command. 328 */ 329 smb_sdrc_t 330 smb_pre_write_raw(smb_request_t *sr) 331 { 332 DTRACE_SMB_START(op__WriteRaw, smb_request_t *, sr); 333 return (SDRC_SUCCESS); 334 } 335 336 void 337 smb_post_write_raw(smb_request_t *sr) 338 { 339 DTRACE_SMB_DONE(op__WriteRaw, smb_request_t *, sr); 340 } 341 342 smb_sdrc_t 343 smb_com_write_raw(struct smb_request *sr) 344 { 345 smbsr_error(sr, NT_STATUS_NOT_SUPPORTED, ERRDOS, 346 ERROR_NOT_SUPPORTED); 347 return (SDRC_ERROR); 348 } 349 350 /* 351 * Write bytes to a file (SMB Core). This request was extended in 352 * LM 0.12 to support 64-bit offsets, indicated by sending a wct of 353 * 14, instead of 12, and including additional offset information. 354 * 355 * A ByteCount of 0 does not truncate the file - use SMB_COM_WRITE 356 * to truncate a file. A zero length merely transfers zero bytes. 357 * 358 * If bit 0 of WriteMode is set, Fid must refer to a disk file and 359 * the data must be on stable storage before responding. 360 * 361 * MS-SMB 3.3.5.8 update to LM 0.12 4.2.5: 362 * If CAP_LARGE_WRITEX is set, the byte count may be larger than the 363 * negotiated buffer size and the server is expected to write the 364 * number of bytes specified. 365 */ 366 smb_sdrc_t 367 smb_pre_write_andx(smb_request_t *sr) 368 { 369 smb_rw_param_t *param; 370 uint32_t off_low; 371 uint32_t off_high; 372 uint16_t datalen_low; 373 uint16_t datalen_high; 374 uint16_t remcnt; 375 int rc; 376 377 param = kmem_zalloc(sizeof (smb_rw_param_t), KM_SLEEP); 378 sr->arg.rw = param; 379 param->rw_magic = SMB_RW_MAGIC; 380 381 if (sr->smb_wct == 14) { 382 rc = smbsr_decode_vwv(sr, "4.wl4.wwwwwl", &sr->smb_fid, 383 &off_low, ¶m->rw_mode, &remcnt, &datalen_high, 384 &datalen_low, ¶m->rw_dsoff, &off_high); 385 386 if (param->rw_dsoff >= 63) 387 param->rw_dsoff -= 63; 388 param->rw_offset = ((uint64_t)off_high << 32) | off_low; 389 } else if (sr->smb_wct == 12) { 390 rc = smbsr_decode_vwv(sr, "4.wl4.wwwww", &sr->smb_fid, 391 &off_low, ¶m->rw_mode, &remcnt, &datalen_high, 392 &datalen_low, ¶m->rw_dsoff); 393 394 if (param->rw_dsoff >= 59) 395 param->rw_dsoff -= 59; 396 param->rw_offset = (uint64_t)off_low; 397 /* off_high not present */ 398 } else { 399 rc = -1; 400 } 401 402 param->rw_count = (uint32_t)datalen_low; 403 404 /* 405 * Work-around a Win7 bug, where it fails to set the 406 * CAP_LARGE_WRITEX flag during session setup. Assume 407 * a large write if the data remaining is >= 64k. 408 */ 409 if ((sr->session->capabilities & CAP_LARGE_WRITEX) != 0 || 410 (sr->smb_data.max_bytes > (sr->smb_data.chain_offset + 0xFFFF))) 411 param->rw_count |= ((uint32_t)datalen_high << 16); 412 413 DTRACE_SMB_START(op__WriteX, smb_request_t *, sr); /* arg.rw */ 414 415 return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); 416 } 417 418 void 419 smb_post_write_andx(smb_request_t *sr) 420 { 421 DTRACE_SMB_DONE(op__WriteX, smb_request_t *, sr); /* arg.rw */ 422 423 kmem_free(sr->arg.rw, sizeof (smb_rw_param_t)); 424 } 425 426 smb_sdrc_t 427 smb_com_write_andx(smb_request_t *sr) 428 { 429 smb_rw_param_t *param = sr->arg.rw; 430 uint16_t count_high; 431 uint16_t count_low; 432 int rc; 433 434 ASSERT(param); 435 ASSERT(param->rw_magic == SMB_RW_MAGIC); 436 437 smbsr_lookup_file(sr); 438 if (sr->fid_ofile == NULL) { 439 smbsr_error(sr, NT_STATUS_INVALID_HANDLE, ERRDOS, ERRbadfid); 440 return (SDRC_ERROR); 441 } 442 443 sr->user_cr = smb_ofile_getcred(sr->fid_ofile); 444 445 if (SMB_WRMODE_IS_STABLE(param->rw_mode) && 446 STYPE_ISIPC(sr->tid_tree->t_res_type)) { 447 smbsr_error(sr, 0, ERRSRV, ERRaccess); 448 return (SDRC_ERROR); 449 } 450 451 rc = smbsr_decode_data(sr, "#.#B", param->rw_dsoff, param->rw_count, 452 ¶m->rw_vdb); 453 454 if ((rc != 0) || (param->rw_vdb.vdb_len != param->rw_count)) { 455 smbsr_error(sr, NT_STATUS_INVALID_PARAMETER, 456 ERRDOS, ERROR_INVALID_PARAMETER); 457 return (SDRC_ERROR); 458 } 459 460 param->rw_vdb.vdb_uio.uio_loffset = (offset_t)param->rw_offset; 461 462 if (param->rw_count != 0) { 463 if ((rc = smb_common_write(sr, param)) != 0) { 464 if (sr->smb_error.status != 465 NT_STATUS_FILE_LOCK_CONFLICT) 466 smbsr_errno(sr, rc); 467 return (SDRC_ERROR); 468 } 469 } 470 471 count_low = param->rw_count & 0xFFFF; 472 count_high = (param->rw_count >> 16) & 0xFF; 473 474 rc = smbsr_encode_result(sr, 6, 0, "bb1.wwwwww", 475 6, sr->andx_com, 15, count_low, 0, count_high, 0, 0); 476 477 return ((rc == 0) ? SDRC_SUCCESS : SDRC_ERROR); 478 } 479 480 /* 481 * Common function for writing files or IPC/MSRPC named pipes. 482 * 483 * Returns errno values. 484 */ 485 int 486 smb_common_write(smb_request_t *sr, smb_rw_param_t *param) 487 { 488 smb_ofile_t *ofile = sr->fid_ofile; 489 smb_node_t *node; 490 int stability = 0; 491 uint32_t lcount; 492 int rc = 0; 493 494 switch (sr->tid_tree->t_res_type & STYPE_MASK) { 495 case STYPE_DISKTREE: 496 case STYPE_PRINTQ: 497 node = ofile->f_node; 498 499 if (!smb_node_is_dir(node)) { 500 rc = smb_lock_range_access(sr, node, param->rw_offset, 501 param->rw_count, B_TRUE); 502 if (rc != NT_STATUS_SUCCESS) { 503 smbsr_error(sr, NT_STATUS_FILE_LOCK_CONFLICT, 504 ERRDOS, ERROR_LOCK_VIOLATION); 505 return (EACCES); 506 } 507 } 508 509 if (SMB_WRMODE_IS_STABLE(param->rw_mode) || 510 (node->flags & NODE_FLAGS_WRITE_THROUGH)) { 511 stability = FSYNC; 512 } 513 514 rc = smb_fsop_write(sr, sr->user_cr, node, 515 ¶m->rw_vdb.vdb_uio, &lcount, stability); 516 517 if (rc) 518 return (rc); 519 520 /* 521 * Used to have code here to set mtime. 522 * We have just done a write, so we know 523 * the file system will update mtime. 524 * No need to do it again here. 525 * 526 * However, keep track of the fact that 527 * we have written data via this handle. 528 */ 529 ofile->f_written = B_TRUE; 530 531 if (!smb_node_is_dir(node)) 532 smb_oplock_break_levelII(node); 533 534 param->rw_count = lcount; 535 break; 536 537 case STYPE_IPC: 538 param->rw_count = param->rw_vdb.vdb_uio.uio_resid; 539 540 if ((rc = smb_opipe_write(sr, ¶m->rw_vdb.vdb_uio)) != 0) 541 param->rw_count = 0; 542 break; 543 544 default: 545 rc = EACCES; 546 break; 547 } 548 549 if (rc != 0) 550 return (rc); 551 552 mutex_enter(&ofile->f_mutex); 553 ofile->f_seek_pos = param->rw_offset + param->rw_count; 554 mutex_exit(&ofile->f_mutex); 555 return (rc); 556 } 557 558 /* 559 * Truncate a disk file to the specified offset. 560 * Typically, w_count will be zero here. 561 * 562 * Note that smb_write_andx cannot be used to reduce the file size so, 563 * if this is required, smb_write is called with a count of zero and 564 * the appropriate file length in offset. The file should be resized 565 * to the length specified by the offset. 566 * 567 * Returns errno values. 568 */ 569 static int 570 smb_write_truncate(smb_request_t *sr, smb_rw_param_t *param) 571 { 572 smb_ofile_t *ofile = sr->fid_ofile; 573 smb_node_t *node = ofile->f_node; 574 smb_attr_t attr; 575 uint32_t status; 576 int rc; 577 578 if (STYPE_ISIPC(sr->tid_tree->t_res_type)) 579 return (0); 580 581 mutex_enter(&node->n_mutex); 582 if (!smb_node_is_dir(node)) { 583 status = smb_lock_range_access(sr, node, param->rw_offset, 584 param->rw_count, B_TRUE); 585 if (status != NT_STATUS_SUCCESS) { 586 mutex_exit(&node->n_mutex); 587 smbsr_error(sr, NT_STATUS_FILE_LOCK_CONFLICT, 588 ERRDOS, ERROR_LOCK_VIOLATION); 589 return (EACCES); 590 } 591 } 592 mutex_exit(&node->n_mutex); 593 594 bzero(&attr, sizeof (smb_attr_t)); 595 attr.sa_mask = SMB_AT_SIZE; 596 attr.sa_vattr.va_size = param->rw_offset; 597 rc = smb_node_setattr(sr, node, sr->user_cr, ofile, &attr); 598 if (rc != 0) 599 return (rc); 600 601 mutex_enter(&ofile->f_mutex); 602 ofile->f_seek_pos = param->rw_offset + param->rw_count; 603 mutex_exit(&ofile->f_mutex); 604 return (0); 605 } 606