1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22# Copyright (c) 1989, 2010, Oracle and/or its affiliates. All rights reserved. 23# Copyright 2012 Nexenta Systems, Inc. All rights reserved. 24# 25# include global definitions 26include ../Makefile.master 27 28# 29# List of architectures to build as part of the standard build. 30# 31# Some of these architectures are built in parallel (see i386_PARALLEL and 32# sparc_PARALLEL). This requires building some parts first before parallel build 33# can start. Platform make files know what should be built as a prerequisite for 34# the parallel build to work. The i386_PREREQ and sparc_PREREQ variables tell 35# which platform directory to enter to start making prerequisite dependencies. 36# 37sparc_ARCHITECTURES = sun4v sun4u sparc 38 39i386_ARCHITECTURES = i86pc i86xpv intel 40 41# 42# For i386 all architectures can be compiled in parallel. 43# 44# intel/Makefile knows how to build prerequisites needed for parallel build. 45# 46i386_PREREQ = intel 47i386_PARALLEL = $(i386_ARCHITECTURES) 48 49# 50# For sparc all architectures can be compiled in parallel. 51# 52# sun4/Makefile knows how to build prerequisites needed for parallel build. 53# can start. 54# 55sparc_PREREQ = sun4 56sparc_PARALLEL = $(sparc_ARCHITECTURES) 57 58# 59# Platforms defined in $(MACH)_PARALLEL are built in parallel. DUMMY is placed 60# at the end in case $(MACH)_PARALLEL is empty to prevent everything going in 61# parallel. 62# 63.PARALLEL: $($(MACH)_PARALLEL) DUMMY 64 65# 66# For build prerequisites we use a special target which is constructed by adding 67# '.prereq' suffix to the $(MACH)_PREREQ. 68# 69PREREQ_TARGET = $($(MACH)_PREREQ:%=%.prereq) 70 71 72def := TARGET= def 73all := TARGET= all 74install := TARGET= install 75install_h := TARGET= install_h 76clean := TARGET= clean 77clobber := TARGET= clobber 78clobber_h := TARGET= clobber 79lint := TARGET= lint 80clean.lint := TARGET= clean.lint 81check := TARGET= check 82modlist := TARGET= modlist 83modlist := NO_STATE= -K $$MODSTATE$$$$ 84 85.KEEP_STATE: 86 87def all lint: all_h $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 88 89install: all_h install_dirs $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 90 91install_dirs: 92 @cd ..; pwd; $(MAKE) rootdirs 93 @pwd 94 95# 96# Rule to build prerequisites. The left part of the pattern will match 97# PREREQ_TARGET. 98# 99# The location of the Makefile is determined by strippinng '.prereq' suffix from 100# the target name. We add '.prereq' suffix to the target passed to the child 101# Makefile so that it can distinguish prerequisite build from the regular one. 102# 103# 104%.prereq: 105 @cd $(@:%.prereq=%); pwd; $(MAKE) $(NO_STATE) $(TARGET).prereq 106 107# 108# Rule to build architecture files. Build all required prerequisites and then 109# build the rest (potentially in parallel). 110# 111$($(MACH)_ARCHITECTURES): $(PREREQ_TARGET) FRC 112 @cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET) 113 114$(PMTMO_FILE) pmtmo_file: $(PATCH_MAKEUP_TABLE) 115 @if [ -z "$(PATCH_MAKEUP_TABLE)" ] ; then \ 116 echo 'ERROR: $$(PATCH_MAKEUP_TABLE) not set' \ 117 'in environment' >&2 ; \ 118 exit 1 ; \ 119 fi 120 RELEASE="$(RELEASE)" MACH="$(MACH)" \ 121 $(CTFCVTPTBL) -o $(PMTMO_FILE) $(PATCH_MAKEUP_TABLE) 122 123# 124# The following is the list of directories which contain Makefiles with 125# targets to install header file. The machine independent headers are 126# installed by invoking the Makefile in the directory containing the 127# header files. Machine and architecture dependent headers are installed 128# by invoking the main makefile for that architecture/machine which, 129# in turn, is responsible for invoking the Makefiles which install headers. 130# It is done this way so as not to assume that all of the header files in 131# the architecture/machine dependent subdirectories are in completely 132# isomorphic locations. 133# 134COMMON_HDRDIRS= common/avs \ 135 common/c2 \ 136 common/des \ 137 common/fs \ 138 common/gssapi \ 139 common/idmap \ 140 common/klm \ 141 common/inet \ 142 common/inet/ipf/netinet \ 143 common/inet/kssl \ 144 common/inet/nca \ 145 common/inet/sockmods/netpacket \ 146 common/io/bpf/net \ 147 common/io/fibre-channel/fca/qlc \ 148 common/ipp \ 149 common/net \ 150 common/netinet \ 151 common/nfs \ 152 common/pcmcia/sys \ 153 common/rpc \ 154 common/rpcsvc \ 155 common/sharefs \ 156 common/smb \ 157 common/smbsrv \ 158 common/sys \ 159 common/vm 160 161 162# 163# Subset of COMMON_HDRDIRS in which at least one header is generated 164# at runtime (e.g., rpcgen), and in which "make clean" should run. 165# Other directories should be included here, but do not yet have the 166# necessary Makefile support (make clean). See 6414855. 167# 168DYNHDRDIRS = common/avs \ 169 common/gssapi \ 170 common/idmap \ 171 common/io/fibre-channel/fca/qlc \ 172 common/klm \ 173 common/rpc \ 174 common/rpcsvc \ 175 common/sys 176 177sparc_HDRDIRS= sun/sys 178i386_HDRDIRS= i86pc/vm i86xpv/vm 179 180HDRDIRS= $(COMMON_HDRDIRS) $($(MACH)_HDRDIRS) 181install_h check: $(HDRDIRS) $($(MACH)_ARCHITECTURES) 182 183$(HDRDIRS): FRC 184 @cd $@; pwd; $(MAKE) $(TARGET) 185 186# ensures that headers made by rpcgen and others are available in uts source 187# for kernel builds to reference without building install_h 188# 189all_h: FRC 190 @cd common/sys; pwd; $(MAKE) $@ 191 @cd common/rpc; pwd; $(MAKE) $@ 192 @cd common/rpcsvc; pwd; $(MAKE) $@ 193 @cd common/gssapi; pwd; $(MAKE) $@ 194 @cd common/idmap; pwd; $(MAKE) $@ 195 @cd common/klm; pwd; $(MAKE) $@ 196 197clean clobber: $($(MACH)_ARCHITECTURES) $(DYNHDRDIRS) 198 @if [ '$(PATCH_BUILD)' != '#' ] ; then \ 199 echo $(RM) $(PMTMO_FILE) ; \ 200 $(RM) $(PMTMO_FILE) ; \ 201 fi 202 203# testing convenience 204clobber_h: $(DYNHDRDIRS) 205 206clean.lint modlist: $($(MACH)_ARCHITECTURES) 207 208# 209# Cross-reference customization: build a cross-reference over all of 210# the supported architectures. Although there's no correct way to set 211# the include path (since we don't know what architecture is the one 212# the user will be interested in), it's historically been set to 213# mirror the $(XRDIRS) list, and that works kinda sorta okay. 214# 215XRDIRS = $(sparc_ARCHITECTURES) $(i386_ARCHITECTURES) sun4 sfmmu \ 216 sun common 217 218XRINCDIRS = $(XRDIRS) 219 220cscope.out tags: FRC 221 $(XREF) -x $@ 222 223FRC: 224