1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright (c) 1989, 2010, Oracle and/or its affiliates. All rights reserved. 24# Copyright 2018 Nexenta Systems, Inc. 25# 26 27include ../Makefile.master 28 29# 30# List of architectures to build as part of the standard build. 31# 32# Some of these architectures are built in parallel (see i386_PARALLEL and 33# sparc_PARALLEL). This requires building some parts first before parallel build 34# can start. Platform make files know what should be built as a prerequisite for 35# the parallel build to work. The i386_PREREQ and sparc_PREREQ variables tell 36# which platform directory to enter to start making prerequisite dependencies. 37# 38sparc_ARCHITECTURES = sun4v sun4u sparc 39 40i386_ARCHITECTURES = i86pc i86xpv intel 41 42# 43# For i386 all architectures can be compiled in parallel. 44# 45# intel/Makefile knows how to build prerequisites needed for parallel build. 46# 47i386_PREREQ = intel 48i386_PARALLEL = $(i386_ARCHITECTURES) 49 50# 51# For sparc all architectures can be compiled in parallel. 52# 53# sun4/Makefile knows how to build prerequisites needed for parallel build. 54# can start. 55# 56sparc_PREREQ = sun4 57sparc_PARALLEL = $(sparc_ARCHITECTURES) 58 59# 60# Platforms defined in $(MACH)_PARALLEL are built in parallel. DUMMY is placed 61# at the end in case $(MACH)_PARALLEL is empty to prevent everything going in 62# parallel. 63# 64.PARALLEL: $($(MACH)_PARALLEL) DUMMY 65 66# 67# For build prerequisites we use a special target which is constructed by adding 68# '.prereq' suffix to the $(MACH)_PREREQ. 69# 70PREREQ_TARGET = $($(MACH)_PREREQ:%=%.prereq) 71 72 73def := TARGET= def 74all := TARGET= all 75install := TARGET= install 76install_h := TARGET= install_h 77clean := TARGET= clean 78clobber := TARGET= clobber 79clobber_h := TARGET= clobber 80lint := TARGET= lint 81clean.lint := TARGET= clean.lint 82check := TARGET= check 83modlist := TARGET= modlist 84modlist := NO_STATE= -K $$MODSTATE$$$$ 85 86.KEEP_STATE: 87 88def all lint: all_h $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 89 90install: all_h install_dirs $(PMTMO_FILE) $($(MACH)_ARCHITECTURES) 91 92install_dirs: 93 @cd ..; pwd; $(MAKE) rootdirs 94 @pwd 95 96# 97# Rule to build prerequisites. The left part of the pattern will match 98# PREREQ_TARGET. 99# 100# The location of the Makefile is determined by strippinng '.prereq' suffix from 101# the target name. We add '.prereq' suffix to the target passed to the child 102# Makefile so that it can distinguish prerequisite build from the regular one. 103# 104# 105%.prereq: 106 @cd $(@:%.prereq=%); pwd; $(MAKE) $(NO_STATE) $(TARGET).prereq 107 108# 109# Rule to build architecture files. Build all required prerequisites and then 110# build the rest (potentially in parallel). 111# 112$($(MACH)_ARCHITECTURES): $(PREREQ_TARGET) FRC 113 @cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET) 114 115$(PMTMO_FILE) pmtmo_file: $(PATCH_MAKEUP_TABLE) 116 @if [ -z "$(PATCH_MAKEUP_TABLE)" ] ; then \ 117 echo 'ERROR: $$(PATCH_MAKEUP_TABLE) not set' \ 118 'in environment' >&2 ; \ 119 exit 1 ; \ 120 fi 121 RELEASE="$(RELEASE)" MACH="$(MACH)" \ 122 $(CTFCVTPTBL) -o $(PMTMO_FILE) $(PATCH_MAKEUP_TABLE) 123 124# 125# The following is the list of directories which contain Makefiles with 126# targets to install header file. The machine independent headers are 127# installed by invoking the Makefile in the directory containing the 128# header files. Machine and architecture dependent headers are installed 129# by invoking the main makefile for that architecture/machine which, 130# in turn, is responsible for invoking the Makefiles which install headers. 131# It is done this way so as not to assume that all of the header files in 132# the architecture/machine dependent subdirectories are in completely 133# isomorphic locations. 134# 135COMMON_HDRDIRS= common/c2 \ 136 common/des \ 137 common/fs \ 138 common/gssapi \ 139 common/idmap \ 140 common/klm \ 141 common/inet \ 142 common/inet/ipf/netinet \ 143 common/inet/kssl \ 144 common/inet/nca \ 145 common/inet/sockmods/netpacket \ 146 common/io/bpf/net \ 147 common/io/fibre-channel/fca/qlc \ 148 common/ipp \ 149 common/net \ 150 common/netinet \ 151 common/nfs \ 152 common/pcmcia/sys \ 153 common/rpc \ 154 common/rpcsvc \ 155 common/sharefs \ 156 common/smb \ 157 common/smbsrv \ 158 common/sys \ 159 common/vm 160 161 162# 163# Subset of COMMON_HDRDIRS in which at least one header is generated 164# at runtime (e.g., rpcgen), and in which "make clean" should run. 165# Other directories should be included here, but do not yet have the 166# necessary Makefile support (make clean). 167# 168DYNHDRDIRS = common/gssapi \ 169 common/idmap \ 170 common/io/fibre-channel/fca/qlc \ 171 common/klm \ 172 common/rpc \ 173 common/rpcsvc \ 174 common/sys 175 176sparc_HDRDIRS= sun/sys 177i386_HDRDIRS= i86pc/vm i86xpv/vm 178 179HDRDIRS= $(COMMON_HDRDIRS) $($(MACH)_HDRDIRS) 180install_h check: $(HDRDIRS) $($(MACH)_ARCHITECTURES) 181 182$(HDRDIRS): FRC 183 @cd $@; pwd; $(MAKE) $(TARGET) 184 185# ensures that headers made by rpcgen and others are available in uts source 186# for kernel builds to reference without building install_h 187# 188all_h: FRC 189 @cd common/sys; pwd; $(MAKE) $@ 190 @cd common/rpc; pwd; $(MAKE) $@ 191 @cd common/rpcsvc; pwd; $(MAKE) $@ 192 @cd common/gssapi; pwd; $(MAKE) $@ 193 @cd common/idmap; pwd; $(MAKE) $@ 194 @cd common/klm; pwd; $(MAKE) $@ 195 196clean clobber: $($(MACH)_ARCHITECTURES) $(DYNHDRDIRS) 197 @if [ '$(PATCH_BUILD)' != '#' ] ; then \ 198 echo $(RM) $(PMTMO_FILE) ; \ 199 $(RM) $(PMTMO_FILE) ; \ 200 fi 201 202# testing convenience 203clobber_h: $(DYNHDRDIRS) 204 205clean.lint modlist: $($(MACH)_ARCHITECTURES) 206 207# 208# Cross-reference customization: build a cross-reference over all of 209# the supported architectures. Although there's no correct way to set 210# the include path (since we don't know what architecture is the one 211# the user will be interested in), it's historically been set to 212# mirror the $(XRDIRS) list, and that works kinda sorta okay. 213# 214XRDIRS = $(sparc_ARCHITECTURES) $(i386_ARCHITECTURES) sun4 sfmmu \ 215 sun common 216 217XRINCDIRS = $(XRDIRS) 218 219cscope.out tags: FRC 220 $(XREF) -x $@ 221 222FRC: 223