1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22# Copyright (c) 1991, 2010, Oracle and/or its affiliates. All rights reserved. 23# Copyright 2014 Garrett D'Amore <garrett@damore.org> 24# Copyright 2016 Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org> 25# Copyright (c) 2017 by Delphix. All rights reserved. 26# Copyright 2019 Joyent, Inc. 27# 28# This Makefiles contains the common targets and definitions for 29# all kernels. It is to be included in the Makefiles for specific 30# implementation architectures and processor architecture dependent 31# modules: i.e.: all driving kernel Makefiles. 32# 33 34# 35# All C objects depend on inline files. However, cc(1) doesn't generate 36# the correct dependency info. Also, these Makefiles don't contain a 37# separate list of C-derived object files (but it is light weight to 38# let the assembler files think they depend upon this when they don't). 39# Fortunately, the inline files won't change very often. So, for now, 40# all objects depend on the inline files. Remove this when the inliner 41# is fixed to drop correct dependency information. 42# 43$(OBJECTS): $(INLINES) 44 45# 46# Partially link .o files to generate the kmod. The fake dependency 47# on modstubs simplifies things... 48# 49$(BINARY): $(OBJECTS) $(DTRACE_MAPFILE) $(MAPFILE) 50 $(LD) -ztype=kmod $(LDFLAGS) -o $@ $(OBJECTS) 51 $(CTFMERGE_UNIQUIFY_AGAINST_GENUNIX) 52 $(POST_PROCESS) 53 54# 55# This target checks each kmod for undefined entry points. It does not 56# modify the kmod in any way. 57# 58$(MODULE).check: FRC 59 @BUILD_TYPE=DBG32 $(MAKE) $(MODULE).check.targ 60 61$(MODULE).check.targ: $(BINARY) $(OBJECTS) $(EXTRA_CHECK_OBJS) $(UNIX_O) $(MODSTUBS_O) $(GENLIB) 62 $(LD) -o /dev/null $(OBJECTS) $(EXTRA_CHECK_OBJS) $(UNIX_O) $(MODSTUBS_O) $(GENLIB) 63 64# 65# Since assym.h is a derived file, the dependency must be explicit for all 66# files including this file. The actual lists are defined in 67# */Makefile.files. 68# 69$(ASSYM_DEPS:%=$(OBJS_DIR)/%): $(DSF_DIR)/$(OBJS_DIR)/assym.h 70 71# 72# Everybody need to know how to create a modstubs.o built with the 73# appropriate flags and located in the appropriate location. 74# 75$(MODSTUBS_O): $(MODSTUBS) 76 $(COMPILE.s) -o $@ $(MODSTUBS) 77 78# 79# Build the source file which contains the kernel's utsname, 80# with release, version and machine set as follows: 81# 82# release: contents of $(RELEASE) (Spaces replaced by '_') 83# version: contents of $(PATCHID) (Spaces replaced by '_') 84# machine: contents of $(UNAME_M) 85# 86# Build environment information is only contained in the comment section. 87# 88 89$(OBJS_DIR)/vers.o: $(OBJECTS) 90 $(COMPILE.c) -DUTS_RELEASE=\"`$(ECHO) $(RELEASE) | sed -e 's/ /_/g'`\" \ 91 -DUTS_VERSION=\"`$(ECHO) $(PATCHID) | sed -e 's/ /_/g'`\" \ 92 -DUTS_PLATFORM=\"$(UNAME_M)\" -o $@ $(SRC)/uts/common/os/vers.c 93 $(CTFCONVERT_O) 94 $(POST_PROCESS_O) 95 96# 97# Installation targets and rules: 98# 99$(ROOT_MOD_DIR) $(USR_MOD_DIR): 100 -$(INS.dir) 101 102$(ROOT_MOD_DIRS_32): $(ROOT_MOD_DIR) 103 -$(INS.dir) 104 105$(USR_MOD_DIRS_32): $(USR_MOD_DIR) 106 -$(INS.dir) 107 108$(ROOT_MOD_DIR)/%: $(OBJS_DIR)/% $(ROOT_MOD_DIR) FRC 109 $(INS.file) 110 111$(ROOT_CPU_DIR)/%: $(OBJS_DIR)/% $(ROOT_CPU_DIR) FRC 112 $(INS.file) 113 114$(ROOT_DRV_DIR)/%: $(OBJS_DIR)/% $(ROOT_DRV_DIR) FRC 115 $(INS.file) 116 117$(ROOT_DTRACE_DIR)/%: $(OBJS_DIR)/% $(ROOT_DTRACE_DIR) FRC 118 $(INS.file) 119 120$(ROOT_EXEC_DIR)/%: $(OBJS_DIR)/% $(ROOT_EXEC_DIR) FRC 121 $(INS.file) 122 123$(ROOT_FS_DIR)/%: $(OBJS_DIR)/% $(ROOT_FS_DIR) FRC 124 $(INS.file) 125 126$(ROOT_SCHED_DIR)/%: $(OBJS_DIR)/% $(ROOT_SCHED_DIR) FRC 127 $(INS.file) 128 129$(ROOT_SOCK_DIR)/%: $(OBJS_DIR)/% $(ROOT_SOCK_DIR) FRC 130 $(INS.file) 131 132$(ROOT_STRMOD_DIR)/%: $(OBJS_DIR)/% $(ROOT_STRMOD_DIR) FRC 133 $(INS.file) 134 135$(ROOT_IPP_DIR)/%: $(OBJS_DIR)/% $(ROOT_IPP_DIR) FRC 136 $(INS.file) 137 138$(ROOT_SYS_DIR)/%: $(OBJS_DIR)/% $(ROOT_SYS_DIR) FRC 139 $(INS.file) 140 141$(ROOT_MISC_DIR)/%: $(OBJS_DIR)/% $(ROOT_MISC_DIR) FRC 142 $(INS.file) 143 144$(ROOT_DACF_DIR)/%: $(OBJS_DIR)/% $(ROOT_DACF_DIR) FRC 145 $(INS.file) 146 147$(ROOT_BRAND_DIR)/%: $(OBJS_DIR)/% $(ROOT_BRAND_DIR) FRC 148 $(INS.file) 149 150$(ROOT_CC_DIR)/%: $(OBJS_DIR)/% $(ROOT_MOD_DIR) $(ROOT_CC_DIR) FRC 151 $(INS.file) 152 153$(ROOT_CRYPTO_DIR)/%: $(OBJS_DIR)/% $(ROOT_CRYPTO_DIR) FRC 154 $(INS.file) 155 156$(ROOT_KGSS_DIR)/%: $(OBJS_DIR)/% $(ROOT_KGSS_DIR) FRC 157 $(INS.file) 158 159$(ROOT_SCSI_VHCI_DIR)/%: $(OBJS_DIR)/% $(ROOT_SCSI_VHCI_DIR) FRC 160 $(INS.file) 161 162$(ROOT_PMCS_FW_DIR)/%: $(OBJS_DIR)/% $(ROOT_PMCS_FW_DIR) FRC 163 $(INS.file) 164 165$(ROOT_QLC_FW_DIR)/%: $(OBJS_DIR)/% $(ROOT_QLC_FW_DIR) FRC 166 $(INS.file) 167 168$(ROOT_EMLXS_FW_DIR)/%: $(OBJS_DIR)/% $(ROOT_EMLXS_FW_DIR) FRC 169 $(INS.file) 170 171$(ROOT_MACH_DIR)/%: $(OBJS_DIR)/% $(ROOT_MACH_DIR) FRC 172 $(INS.file) 173 174$(ROOT_FONT_DIR)/%: $(OBJS_DIR)/% $(ROOT_MOD_DIR) $(ROOT_FONT_DIR) FRC 175 $(INS.file) 176 177$(ROOT_MAC_DIR)/%: $(OBJS_DIR)/% $(ROOT_MOD_DIR) $(ROOT_MAC_DIR) FRC 178 $(INS.file) 179 180$(USR_DRV_DIR)/%: $(OBJS_DIR)/% $(USR_DRV_DIR) FRC 181 $(INS.file) 182 183$(USR_EXEC_DIR)/%: $(OBJS_DIR)/% $(USR_EXEC_DIR) FRC 184 $(INS.file) 185 186$(USR_FS_DIR)/%: $(OBJS_DIR)/% $(USR_FS_DIR) FRC 187 $(INS.file) 188 189$(USR_SCHED_DIR)/%: $(OBJS_DIR)/% $(USR_SCHED_DIR) FRC 190 $(INS.file) 191 192$(USR_SOCK_DIR)/%: $(OBJS_DIR)/% $(USR_SOCK_DIR) FRC 193 $(INS.file) 194 195$(USR_STRMOD_DIR)/%: $(OBJS_DIR)/% $(USR_STRMOD_DIR) FRC 196 $(INS.file) 197 198$(USR_SYS_DIR)/%: $(OBJS_DIR)/% $(USR_SYS_DIR) FRC 199 $(INS.file) 200 201$(USR_MISC_DIR)/%: $(OBJS_DIR)/% $(USR_MISC_DIR) FRC 202 $(INS.file) 203 204$(USR_DACF_DIR)/%: $(OBJS_DIR)/% $(USR_DACF_DIR) FRC 205 $(INS.file) 206 207$(USR_PCBE_DIR)/%: $(OBJS_DIR)/% $(USR_PCBE_DIR) FRC 208 $(INS.file) 209 210$(USR_DTRACE_DIR)/%: $(OBJS_DIR)/% $(USR_DTRACE_DIR) FRC 211 $(INS.file) 212 213$(USR_BRAND_DIR)/%: $(OBJS_DIR)/% $(USR_BRAND_DIR) FRC 214 $(INS.file) 215 216$(ROOT_KICONV_DIR)/%: $(OBJS_DIR)/% $(ROOT_KICONV_DIR) FRC 217 $(INS.file) 218 219$(ROOT_FIRMWARE_DIR)/$(MODULE): 220 $(INS.dir) 221 222$(ROOT_FIRMWARE_DIR)/$(MODULE)/%:= FILEMODE = $(CFILEMODE) 223 224$(ROOT_FIRMWARE_DIR)/$(MODULE)/%: $(ROOT_FIRMWARE_DIR)/$(MODULE) $(FWDIR)/% 225 $(INS.file) 226 227include $(SRC)/Makefile.psm.targ 228 229# 230# Target for 64b modules 231# 232$(ROOT_KERN_DIR_64): 233 -$(INS.dir) 234 235$(ROOT_KERN_DIR_64)/%: $(OBJS_DIR)/% $(ROOT_KERN_DIR_64) FRC 236 $(INS.file) 237 238%/$(SUBDIR64): % 239 -$(INS.dir) 240 241# 242# Targets for '.conf' file installation. 243# 244$(ROOT_CONFFILE): $(SRC_CONFFILE) $(ROOT_CONFFILE:%/$(CONFFILE)=%) 245 $(INS.conffile) 246 247# 248# Targets for creating links between common platforms. ROOT_PLAT_LINKS 249# are are the /platform level while ROOT_PLAT_LINKS_2 are one level 250# down (/platform/`uname -i`/{lib|sbin|kernel}. 251# 252$(ROOT_PLAT_LINKS): 253 $(INS.slink1) 254 255$(ROOT_PLAT_LINKS_2): 256 $(INS.slink2) 257 258$(USR_PLAT_LINKS): 259 $(INS.slink1) 260 261$(USR_PLAT_LINKS_2): 262 $(INS.slink2) 263 264# 265# multiple builds support 266# 267def $(DEF_DEPS) := TARGET = def 268all $(ALL_DEPS) := TARGET = all 269clean $(CLEAN_DEPS) := TARGET = clean 270clobber $(CLOBBER_DEPS) := TARGET = clobber 271modlist $(MODLIST_DEPS) := TARGET = modlist 272modlist $(MODLIST_DEPS) := NO_STATE= -K $$MODSTATE$$$$ 273install $(INSTALL_DEPS) := TARGET = install 274symcheck $(SYM_DEPS) := TARGET = symcheck 275 276ALL_TARGS = def all clean clobber install symcheck 277 278ALL_OBJ32 = $(ALL_TARGS:%=%.obj32) 279 280$(ALL_OBJ32): FRC 281 @BUILD_TYPE=OBJ32 VERSION='$(VERSION)' $(MAKE) $(NO_STATE) $(TARGET).targ 282 283ALL_DEBUG32 = $(ALL_TARGS:%=%.debug32) 284 285$(ALL_DEBUG32): FRC 286 @BUILD_TYPE=DBG32 VERSION='$(VERSION)' $(MAKE) $(NO_STATE) $(TARGET).targ 287 288ALL_OBJ64 = $(ALL_TARGS:%=%.obj64) 289 290$(ALL_OBJ64): FRC 291 @BUILD_TYPE=OBJ64 VERSION='$(VERSION)' $(MAKE) $(NO_STATE) $(TARGET).targ 292 293ALL_DEBUG64 = $(ALL_TARGS:%=%.debug64) 294 295$(ALL_DEBUG64): FRC 296 @BUILD_TYPE=DBG64 VERSION='$(VERSION)' $(MAKE) $(NO_STATE) $(TARGET).targ 297 298# 299# Currently only the IP module needs symbol checking on obj64. 300# Other modules have the same global-objs nm output for debug64 and obj64. 301# 302$(SISCHECK_DEPS): $(DEF_DEPS) 303 @TARG=`$(ECHO) $@ | $(CUT) -d'.' -f2`; \ 304 MODSYMS=$(MODULE).symbols.$$TARG; \ 305 if [ -f "$(MODULE).global-objs.$$TARG" ]; then \ 306 $(GREP) -v '#' $(MODULE).global-objs.$$TARG |$(GREP) . | \ 307 $(SORT) -u > $$MODSYMS.tmp; \ 308 $(NM) $$TARG/$(MODULE) |$(GREP) OBJT |$(GREP) -v UNDEF | \ 309 $(CUT) -d'|' -f8 |$(GREP) -v '^___const_' | \ 310 $(GREP) -v '\.[0-9]*$$' |$(SORT) -u \ 311 > $$MODSYMS.tmp.new; \ 312 $(DIFF) $$MODSYMS.tmp $$MODSYMS.tmp.new > $$MODSYMS.diff || \ 313 ($(ECHO) "warning: $(MODULE) symbol checking:" \ 314 "global variable(s) introduced and/or removed."; \ 315 $(CAT) $$MODSYMS.diff; exit 1) \ 316 fi 317 318$(SISCLEAN_DEPS): 319 -TARG=`$(ECHO) $@ | $(CUT) -d'.' -f2`; \ 320 MODSYMS=$(MODULE).symbols.$$TARG; \ 321 $(RM) $$MODSYMS.tmp $$MODSYMS.tmp.new $$MODSYMS.diff Nothing_to_remove 322 323 324$(OBJS_DIR): 325 -@mkdir -p $@ 2> /dev/null 326 327def.targ: $(OBJS_DIR) $(ALL_TARGET) 328 329all.targ: $(OBJS_DIR) $(ALL_TARGET) 330 331install.targ: $(OBJS_DIR) $(INSTALL_TARGET) 332 333# 334# Support for Install.sh. 335# 336 337modlist: $(MODLIST_DEPS) 338 339# paths relative to $(ROOT). 340RELMODULE = $(ROOTMODULE:$(ROOT)/%=%) 341RELCONF = $(ROOT_CONFFILE:$(ROOT)/%=%) 342RELLINK = $(ROOTLINK:$(ROOT)/%=%) 343RELUNIX = $(UNIX32_LINK:$(ROOT)/%=%) 344RELSOFTLINKS = $(ROOTSOFTLINKS:$(ROOT)/%=%) 345 346MODSRC:sh= pwd 347 348# 349# Generate module information for Install.sh, i.e., specify what files 350# Install.sh should include. Each line looks like 351# <tag> <srcdir> <arg1> <arg2> ... 352# where <tag> specifies the type of file, <srcdir> gives the source 353# path (useful if there is an error), and <argN> is one or more 354# additional bits of information that Install.sh needs (e.g., source 355# directory, install directory, filtering tags). See Install.sh for 356# details on the arguments for each tag type, especially the functions 357# copymod, filtmod, and filtimpl. 358# 359# Changes to this target may require corresponding changes to 360# Install.sh. 361# 362# Don't issue a MOD entry if it's not in the install list. 363# 364 365$(MODLIST_DEPS): FRC 366 @case $@ in \ 367 *32) \ 368 class=32; \ 369 [ -n "$(RELMODULE)" ] && relmodule=`dirname $(RELMODULE)`;; \ 370 *64) \ 371 class=64; \ 372 [ -n "$(RELMODULE)" ] && \ 373 relmodule=`dirname $(RELMODULE)`/$(SUBDIR64);; \ 374 esac; \ 375 if [ -z "$(THISIMPL)" ]; then \ 376 impl=all; \ 377 else \ 378 impl=$(THISIMPL); \ 379 fi; \ 380 if [ -n "$(ROOTMODULE)" -a -n "$(INSTALL_TARGET)" ]; then \ 381 if [ -z "$(MODULE)" ]; then \ 382 module=`basename $(ROOTMODULE)`; \ 383 else \ 384 module=$(MODULE); \ 385 fi; \ 386 tinstall="$(INSTALL_TARGET)"; \ 387 for t in $$tinstall; do \ 388 if [ "$(ROOTMODULE)" = $$t ]; then \ 389 echo MOD $(MODSRC) $$module $$relmodule \ 390 $$class $$impl; \ 391 break; \ 392 fi \ 393 done \ 394 fi; \ 395 if [ -n "$(CONF_SRCDIR)" ]; then \ 396 tinstall="$(INSTALL_TARGET)"; \ 397 for t in $$tinstall; do \ 398 if [ $(ROOT_CONFFILE) = $$t ]; then \ 399 echo CONF $(MODSRC) $(RELCONF) \ 400 $(MODSRC)/$(CONF_SRCDIR) $$impl $$module; \ 401 break; \ 402 fi \ 403 done \ 404 fi; \ 405 if [ -n "$(ROOTLINK)" ]; then \ 406 rellinks="$(RELLINK)"; \ 407 for r in $$rellinks; do \ 408 if [ $$class = 32 ]; then \ 409 linkdir=`dirname $$r`; \ 410 else \ 411 linkdir=`dirname $$r`/$(SUBDIR64); \ 412 fi; \ 413 echo LINK $(MODSRC) $$relmodule $$module \ 414 $$linkdir `basename $$r` $$impl; \ 415 done \ 416 fi; \ 417 if [ -n "$(UNIX32_LINK)" ]; then \ 418 echo SYMLINK $(MODSRC) $(SUBDIR64)/$(UNIX) \ 419 `dirname $(RELUNIX)` unix $$impl $$module; \ 420 fi; \ 421 trelsoftlinks="$(RELSOFTLINKS)"; \ 422 for t in $$trelsoftlinks; do \ 423 if [ $$class = 32 ]; then \ 424 linkdir=`dirname $$t`; \ 425 else \ 426 linkdir=`dirname $$t`/$(SUBDIR64); \ 427 fi; \ 428 linkname=`basename $$t`; \ 429 echo SYMLINK $(MODSRC) $(MODULE) $$linkdir $$linkname \ 430 $$impl $$module; \ 431 done 432 433# 434# Cleanliness is next to ... 435# 436clean.targ: 437 -$(RM) $(CLEANFILES) Nothing_to_remove 438 439clobber.targ: 440 -$(RM) $(CLOBBERFILES) Nothing_to_remove 441 442FRC: 443