1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. 22# Copyright 2015 Nexenta Systems, Inc. All rights reserved. 23# Copyright 2012 Joshua M. Clulow <josh@sysmgr.org> 24# Copyright 2015, OmniTI Computer Consulting, Inc. All rights reserved. 25# Copyright 2019 OmniOS Community Edition (OmniOSce) Association. 26# Copyright 2019, Joyent, Inc. 27# 28# - This file is sourced by "bldenv.sh" and "nightly.sh" and should not 29# be executed directly. 30# - This script is only interpreted by ksh93 and explicitly allows the 31# use of ksh93 language extensions. 32 33 34# ----------------------------------------------------------------------------- 35# Parameters you are likely to want to change 36# ----------------------------------------------------------------------------- 37 38# DEBUG build only (-D, -F) 39# do not bringover from the parent (-n) 40# runs 'make check' (-C) 41# checks for new interfaces in libraries (-A) 42# sends mail on completion (-m and the MAILTO variable) 43# creates packages for PIT/RE (-p) 44# checks for changes in ELF runpaths (-r) 45# build and use this workspace's tools in $SRC/tools (-t) 46export NIGHTLY_OPTIONS='-FnCDAmprt' 47 48# Some scripts optionally send mail messages to MAILTO. 49#export MAILTO= 50 51# CODEMGR_WS - where is your workspace at 52export CODEMGR_WS="`git rev-parse --show-toplevel`" 53 54# Compilers may be specified using the following variables: 55# PRIMARY_CC - primary C compiler 56# PRIMARY_CCC - primary C++ compiler 57# 58# SHADOW_CCS - list of shadow C compilers 59# SHADOW_CCCS - list of shadow C++ compilers 60# 61# Each entry has the form <name>,<path to binary>,<style> where name is a 62# free-form name (possibly used in the makefiles to guard options), path is 63# the path to the executable. style is the 'style' of command line taken by 64# the compiler, currently either gnu (or gcc) or sun (or cc), which is also 65# used by Makefiles to guard options. 66# 67# __SUNC and __GNUC must still be set to reflect the style of the primary 68# compiler (and to influence the default primary, otherwise) 69# 70# for example: 71# export PRIMARY_CC=gcc4,/opt/gcc/4.4.4/bin/gcc,gnu 72# export PRIMARY_CCC=gcc4,/opt/gcc/4.4.4/bin/g++,gnu 73# export SHADOW_CCS=studio12,/opt/SUNWspro/bin/cc,sun 74# export SHADOW_CCCS=studio12,/opt/SUNWspro/bin/CC,sun 75# 76# There can be several space-separated entries in SHADOW_* to run multiple 77# shadow compilers. 78# 79# To disable shadow compilation, unset SHADOW_* or set them to the empty string. 80# 81export GNUC_ROOT=/usr/gcc/7 82export PRIMARY_CC=gcc7,$GNUC_ROOT/bin/gcc,gnu 83export PRIMARY_CCC=gcc7,$GNUC_ROOT/bin/g++,gnu 84export SHADOW_CCS=gcc4,/opt/gcc/4.4.4/bin/gcc,gnu 85export SHADOW_CCCS=gcc4,/opt/gcc/4.4.4/bin/g++,gnu 86 87# comment to disable smatch 88export ENABLE_SMATCH=1 89 90# Comment this out to disable support for SMB printing, i.e. if you 91# don't want to bother providing the CUPS headers this needs. 92export ENABLE_SMB_PRINTING= 93 94# If your distro uses certain versions of Perl, make sure either Makefile.master 95# contains your new defaults OR your .env file sets them. 96# These are how you would override for building on OmniOS r151028, for example. 97#export PERL_VERSION=5.28 98#export PERL_ARCH=i86pc-solaris-thread-multi-64int 99#export PERL_PKGVERS= 100 101# If your distro uses certain versions of Python, make sure either 102# Makefile.master contains your new defaults OR your .env file sets them. 103#export PYTHON_VERSION=2.7 104#export PYTHON_PKGVERS=-27 105#export PYTHON_SUFFIX= 106#export PYTHON3_VERSION=3.5 107#export PYTHON3_PKGVERS=-35 108#export PYTHON3_SUFFIX=m 109 110# To disable building with either Python2 or Python 3 (or both), uncomment 111# these lines: 112#export BUILDPY2='#' 113#export BUILDPY3='#' 114 115# Set console color scheme either by build type: 116# 117#export RELEASE_CONSOLE_COLOR="-DDEFAULT_ANSI_FOREGROUND=ANSI_COLOR_BLACK \ 118# -DDEFAULT_ANSI_BACKGROUND=ANSI_COLOR_WHITE" 119# 120#export DEBUG_CONSOLE_COLOR="-DDEFAULT_ANSI_FOREGROUND=ANSI_COLOR_RED \ 121# -DDEFAULT_ANSI_BACKGROUND=ANSI_COLOR_WHITE" 122# 123# or just one for any build type: 124# 125#export DEFAULT_CONSOLE_COLOR="-DDEFAULT_ANSI_FOREGROUND=ANSI_COLOR_BLACK \ 126# -DDEFAULT_ANSI_BACKGROUND=ANSI_COLOR_WHITE" 127 128# Set if your distribution has different package versioning 129#export PKGVERS_BRANCH=2018.0.0.17900 130 131# Skip Java 8 builds on distributions that don't support it 132#export BLD_JAVA_8= 133 134# POST_NIGHTLY can be any command to be run at the end of nightly. See 135# nightly(1) for interactions between environment variables and this command. 136#POST_NIGHTLY= 137 138# ----------------------------------------------------------------------------- 139# You are less likely to need to modify parameters below. 140# ----------------------------------------------------------------------------- 141 142# Maximum number of dmake jobs. The recommended number is 2 + NCPUS, 143# where NCPUS is the number of logical CPUs on your build system. 144function maxjobs 145{ 146 nameref maxjobs=$1 147 integer ncpu 148 integer -r min_mem_per_job=512 # minimum amount of memory for a job 149 150 ncpu=$(builtin getconf ; getconf 'NPROCESSORS_ONLN') 151 (( maxjobs=ncpu + 2 )) 152 153 # Throttle number of parallel jobs launched by dmake to a value which 154 # gurantees that all jobs have enough memory. This was added to avoid 155 # excessive paging/swapping in cases of virtual machine installations 156 # which have lots of CPUs but not enough memory assigned to handle 157 # that many parallel jobs 158 if [[ $(/usr/sbin/prtconf 2>'/dev/null') == ~(E)Memory\ size:\ ([[:digit:]]+)\ Megabytes ]] ; then 159 integer max_jobs_per_memory # parallel jobs which fit into physical memory 160 integer physical_memory # physical memory installed 161 162 # The array ".sh.match" contains the contents of capturing 163 # brackets in the last regex, .sh.match[1] will contain 164 # the value matched by ([[:digit:]]+), i.e. the amount of 165 # memory installed 166 physical_memory="10#${.sh.match[1]}" 167 168 (( 169 max_jobs_per_memory=round(physical_memory/min_mem_per_job) , 170 maxjobs=fmax(2, fmin(maxjobs, max_jobs_per_memory)) 171 )) 172 fi 173 174 return 0 175} 176 177maxjobs DMAKE_MAX_JOBS # "DMAKE_MAX_JOBS" passed as ksh(1) name reference 178export DMAKE_MAX_JOBS 179 180# path to onbld tool binaries 181ONBLD_BIN='/opt/onbld/bin' 182 183# PARENT_WS is used to determine the parent of this workspace. This is 184# for the options that deal with the parent workspace (such as where the 185# proto area will go). 186export PARENT_WS='' 187 188# CLONE_WS is the workspace nightly should do a bringover from. 189# The bringover, if any, is done as STAFFER. 190export CLONE_WS='ssh://anonhg@hg.illumos.org/illumos-gate' 191 192# Set STAFFER to your own login as gatekeeper or developer 193# The point is to use group "staff" and avoid referencing the parent 194# workspace as root. 195export STAFFER="$LOGNAME" 196export MAILTO="${MAILTO:-$STAFFER}" 197 198# If you wish the mail messages to be From: an arbitrary address, export 199# MAILFROM. 200#export MAILFROM="user@example.com" 201 202# The project (see project(4)) under which to run this build. If not 203# specified, the build is simply run in a new task in the current project. 204export BUILD_PROJECT='' 205 206# You should not need to change the next three lines 207export ATLOG="$CODEMGR_WS/log" 208export LOGFILE="$ATLOG/nightly.log" 209export MACH="$(uname -p)" 210 211# 212# The following macro points to the closed binaries. Once illumos has 213# totally freed itself, we can remove this reference. 214# 215# Location of encumbered binaries. 216export ON_CLOSED_BINS="$CODEMGR_WS/closed" 217 218# REF_PROTO_LIST - for comparing the list of stuff in your proto area 219# with. Generally this should be left alone, since you want to see differences 220# from your parent (the gate). 221# 222export REF_PROTO_LIST="$PARENT_WS/usr/src/proto_list_${MACH}" 223 224 225export ROOT="$CODEMGR_WS/proto/root_${MACH}" 226export SRC="$CODEMGR_WS/usr/src" 227export MULTI_PROTO="no" 228 229# 230# build environment variables, including version info for mcs, motd, 231# motd, uname and boot messages. Mostly you shouldn't change this except 232# when the release slips (nah) or you move an environment file to a new 233# release 234# 235export VERSION="`git describe --long --all HEAD | cut -d/ -f2-`" 236 237# 238# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 239# there might be special reasons to override them here, but that 240# should not be the case in general 241# 242# export RELEASE='5.11' 243# export RELEASE_DATE='October 2007' 244 245# proto area in parent for optionally depositing a copy of headers and 246# libraries corresponding to the protolibs target 247# not applicable given the NIGHTLY_OPTIONS 248# 249export PARENT_ROOT="$PARENT_WS/proto/root_$MACH" 250export PARENT_TOOLS_ROOT="$PARENT_WS/usr/src/tools/proto/root_$MACH-nd" 251 252# Package creation variables. You probably shouldn't change these, 253# either. 254# 255# PKGARCHIVE determines where the repository will be created. 256# 257# PKGPUBLISHER_REDIST controls the publisher setting for the repository. 258# 259export PKGARCHIVE="${CODEMGR_WS}/packages/${MACH}/nightly" 260# export PKGPUBLISHER_REDIST='on-redist' 261 262# Package manifest format version. 263export PKGFMT_OUTPUT='v1' 264 265# we want make to do as much as it can, just in case there's more than 266# one problem. 267export MAKEFLAGS='k' 268 269# Magic variables to prevent the devpro compilers/teamware from checking 270# for updates or sending mail back to devpro on every use. 271export SUNW_NO_UPDATE_NOTIFY='1' 272export UT_NO_USAGE_TRACKING='1' 273 274# Build tools - don't change these unless you know what you're doing. These 275# variables allows you to get the compilers and onbld files locally. 276# Set BUILD_TOOLS to pull everything from one location. 277# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 278# SUNWonbld and SPRO_ROOT to where you keep the compilers. SPRO_VROOT 279# exists to make it easier to test new versions of the compiler. 280export BUILD_TOOLS='/opt' 281#export ONBLD_TOOLS='/opt/onbld' 282export SPRO_ROOT='/opt/SUNWspro' 283export SPRO_VROOT="$SPRO_ROOT" 284 285# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 286# if the 'N' option is not specified, is to run this test. 287#CHECK_PATHS='y' 288 289if [[ "$ENABLE_SMATCH" = "1" ]]; then 290 SMATCHBIN=$CODEMGR_WS/usr/src/tools/proto/root_$MACH-nd/opt/onbld/bin/$MACH/smatch 291 export SHADOW_CCS="$SHADOW_CCS smatch,$SMATCHBIN,smatch" 292fi 293