1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. 22# Copyright 2012 Joshua M. Clulow <josh@sysmgr.org> 23# Copyright 2015 Nexenta Systems, Inc. All rights reserved. 24# Copyright 2015, OmniTI Computer Consulting, Inc. All rights reserved. 25# Copyright 2016 RackTop Systems. 26# Copyright 2019 OmniOS Community Edition (OmniOSce) Association. 27# Copyright 2020 Joyent, Inc. 28# Copyright 2023 Bill Sommerfeld 29# 30# - This file is sourced by "bldenv" and "nightly" and should not 31# be executed directly. 32# - This script is only interpreted by ksh93 and explicitly allows the 33# use of ksh93 language extensions. 34 35 36# ----------------------------------------------------------------------------- 37# Parameters you are likely to want to change 38# ----------------------------------------------------------------------------- 39 40# DEBUG build only (-D, -F) 41# do not bringover from the parent (-n) 42# runs 'make check' (-C) 43# checks for new interfaces in libraries (-A) 44# sends mail on completion (-m and the MAILTO variable) 45# creates packages for PIT/RE (-p) 46# checks for changes in ELF runpaths (-r) 47# build and use this workspace's tools in $SRC/tools (-t) 48export NIGHTLY_OPTIONS='-FnCDAmprt' 49 50# Some scripts optionally send mail messages to MAILTO. 51#export MAILTO= 52 53# CODEMGR_WS - where is your workspace at 54export CODEMGR_WS="${CODEMGR_WS:-`git rev-parse --show-toplevel`}" 55 56# Compilers may be specified using the following variables: 57# PRIMARY_CC - primary C compiler 58# PRIMARY_CCC - primary C++ compiler 59# 60# SHADOW_CCS - list of shadow C compilers 61# SHADOW_CCCS - list of shadow C++ compilers 62# 63# Each entry has the form <name>,<path to binary>,<style> where name is a 64# free-form name (possibly used in the makefiles to guard options), path is 65# the path to the executable. style is the 'style' of command line taken by 66# the compiler, currently either gnu (or gcc) or sun (or cc), which is also 67# used by Makefiles to guard options. 68# 69# for example: 70# export PRIMARY_CC=gcc4,/opt/gcc/4.4.4/bin/gcc,gnu 71# export PRIMARY_CCC=gcc4,/opt/gcc/4.4.4/bin/g++,gnu 72# export SHADOW_CCS=studio12,/opt/SUNWspro/bin/cc,sun 73# export SHADOW_CCCS=studio12,/opt/SUNWspro/bin/CC,sun 74# 75# There can be several space-separated entries in SHADOW_* to run multiple 76# shadow compilers. 77# 78# To disable shadow compilation, unset SHADOW_* or set them to the empty string. 79# 80export GNUC_ROOT=/usr/gcc/10 81export PRIMARY_CC=gcc10,$GNUC_ROOT/bin/gcc,gnu 82export PRIMARY_CCC=gcc10,$GNUC_ROOT/bin/g++,gnu 83export SHADOW_CCS=gcc7,/usr/gcc/7/bin/gcc,gnu 84export SHADOW_CCCS=gcc7,/usr/gcc/7/bin/g++,gnu 85 86# comment to disable smatch 87export ENABLE_SMATCH=1 88 89# Comment this out to disable support for SMB printing, i.e. if you 90# don't want to bother providing the CUPS headers this needs. 91export ENABLE_SMB_PRINTING= 92 93# If your distro uses certain versions of Perl, make sure either Makefile.master 94# contains your new defaults OR your .env file sets them. 95# These are how you would override for building on OmniOS r151028, for example. 96#export PERL_VERSION=5.28 97#export PERL_VARIANT=-thread-multi 98#export PERL_PKGVERS= 99 100# To disable building of the 32-bit or 64-bit perl modules (or both), 101# uncomment these lines: 102#export BUILDPERL32='#' 103#export BUILDPERL64='#' 104 105# If your distro uses certain versions of Python, make sure either 106# Makefile.master contains your new defaults OR your .env file sets them. 107#export PYTHON3_VERSION=3.9 108#export PYTHON3_PKGVERS=-39 109#export PYTHON3_SUFFIX= 110 111# Set console color scheme either by build type: 112# 113#export RELEASE_CONSOLE_COLOR="-DDEFAULT_ANSI_FOREGROUND=ANSI_COLOR_BLACK \ 114# -DDEFAULT_ANSI_BACKGROUND=ANSI_COLOR_WHITE" 115# 116#export DEBUG_CONSOLE_COLOR="-DDEFAULT_ANSI_FOREGROUND=ANSI_COLOR_RED \ 117# -DDEFAULT_ANSI_BACKGROUND=ANSI_COLOR_WHITE" 118# 119# or just one for any build type: 120# 121#export DEFAULT_CONSOLE_COLOR="-DDEFAULT_ANSI_FOREGROUND=ANSI_COLOR_BLACK \ 122# -DDEFAULT_ANSI_BACKGROUND=ANSI_COLOR_WHITE" 123 124# Set if your distribution has different package versioning 125#export PKGVERS_BRANCH=2018.0.0.17900 126 127# Skip Java 11 builds on distributions that don't support it 128#export BLD_JAVA_11= 129 130# POST_NIGHTLY can be any command to be run at the end of nightly. See 131# nightly(1) for interactions between environment variables and this command. 132#POST_NIGHTLY= 133 134# Populates /etc/versions/build on each nightly run 135export BUILDVERSION_EXEC="git describe --all --long --dirty" 136 137# ----------------------------------------------------------------------------- 138# You are less likely to need to modify parameters below. 139# ----------------------------------------------------------------------------- 140 141# Maximum number of dmake jobs. The recommended number is 2 + NCPUS, 142# where NCPUS is the number of logical CPUs on your build system. 143function maxjobs 144{ 145 nameref maxjobs=$1 146 integer ncpu 147 integer -r min_mem_per_job=512 # minimum amount of memory for a job 148 149 ncpu=$(builtin getconf ; getconf 'NPROCESSORS_ONLN') 150 (( maxjobs=ncpu + 2 )) 151 152 # Throttle number of parallel jobs launched by dmake to a value which 153 # gurantees that all jobs have enough memory. This was added to avoid 154 # excessive paging/swapping in cases of virtual machine installations 155 # which have lots of CPUs but not enough memory assigned to handle 156 # that many parallel jobs 157 if [[ $(/usr/sbin/prtconf 2>'/dev/null') == ~(E)Memory\ size:\ ([[:digit:]]+)\ Megabytes ]] ; then 158 integer max_jobs_per_memory # parallel jobs which fit into physical memory 159 integer physical_memory # physical memory installed 160 161 # The array ".sh.match" contains the contents of capturing 162 # brackets in the last regex, .sh.match[1] will contain 163 # the value matched by ([[:digit:]]+), i.e. the amount of 164 # memory installed 165 physical_memory="10#${.sh.match[1]}" 166 167 (( 168 max_jobs_per_memory=round(physical_memory/min_mem_per_job) , 169 maxjobs=fmax(2, fmin(maxjobs, max_jobs_per_memory)) 170 )) 171 fi 172 173 return 0 174} 175 176maxjobs DMAKE_MAX_JOBS # "DMAKE_MAX_JOBS" passed as ksh(1) name reference 177export DMAKE_MAX_JOBS 178 179# path to onbld tool binaries 180ONBLD_BIN='/opt/onbld/bin' 181 182# PARENT_WS is used to determine the parent of this workspace. This is 183# for the options that deal with the parent workspace (such as where the 184# proto area will go). 185export PARENT_WS="${PARENT_WS:-}" 186 187# CLONE_WS is the workspace nightly should do a bringover from. 188# The bringover, if any, is done as STAFFER. 189export CLONE_WS="${CLONE_WS:-}" 190 191# Set STAFFER to your own login as gatekeeper or developer 192# The point is to use group "staff" and avoid referencing the parent 193# workspace as root. 194export STAFFER="$LOGNAME" 195export MAILTO="${MAILTO:-$STAFFER}" 196 197# If you wish the mail messages to be From: an arbitrary address, export 198# MAILFROM. 199#export MAILFROM="user@example.com" 200 201# The project (see project(5)) under which to run this build. If not 202# specified, the build is simply run in a new task in the current project. 203export BUILD_PROJECT='' 204 205# You should not need to change the next three lines 206export ATLOG="$CODEMGR_WS/log" 207export LOGFILE="$ATLOG/nightly.log" 208export MACH="$(uname -p)" 209 210# 211# The following macro points to the closed binaries. Once illumos has 212# totally freed itself, we can remove this reference. 213# 214# Location of encumbered binaries. 215export ON_CLOSED_BINS="/opt/onbld/closed" 216 217# REF_PROTO_LIST - for comparing the list of stuff in your proto area 218# with. Generally this should be left alone, since you want to see differences 219# from your parent (the gate). 220# 221export REF_PROTO_LIST="$PARENT_WS/usr/src/proto_list_${MACH}" 222 223 224export ROOT="$CODEMGR_WS/proto/root_${MACH}" 225export SRC="$CODEMGR_WS/usr/src" 226export MULTI_PROTO="no" 227 228# 229# build environment variables, including version info for mcs, motd, 230# motd, uname and boot messages. Mostly you shouldn't change this except 231# when the release slips (nah) or you move an environment file to a new 232# release 233# 234export VERSION="${VERSION:-`git describe --long --all HEAD | cut -d/ -f2-`}" 235 236# 237# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 238# there might be special reasons to override them here, but that 239# should not be the case in general 240# 241# export RELEASE='5.11' 242# export RELEASE_DATE='October 2007' 243 244# proto area in parent for optionally depositing a copy of headers and 245# libraries corresponding to the protolibs target 246# not applicable given the NIGHTLY_OPTIONS 247# 248export PARENT_ROOT="$PARENT_WS/proto/root_$MACH" 249export PARENT_TOOLS_ROOT="$PARENT_WS/usr/src/tools/proto/root_$MACH-nd" 250 251# Package creation variables. You probably shouldn't change these, 252# either. 253# 254# PKGARCHIVE determines where the repository will be created. 255# 256# PKGPUBLISHER_REDIST controls the publisher setting for the repository. 257# 258export PKGARCHIVE="${CODEMGR_WS}/packages/${MACH}/nightly" 259# export PKGPUBLISHER_REDIST='on-redist' 260 261# Package manifest format version. 262export PKGFMT_OUTPUT='v2' 263 264# We want make to do as much as it can, just in case there's more than 265# one problem. 266# We also must set e in MAKEFLAGS as the makefiles depend on importing 267# the environment variables set here. 268export MAKEFLAGS='ke' 269 270# Build tools - don't change these unless you know what you're doing. These 271# variables allows you to get the compilers and onbld files locally. 272# Set BUILD_TOOLS to pull everything from one location. 273# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 274# SUNWonbld. 275export BUILD_TOOLS='/opt' 276#export ONBLD_TOOLS='/opt/onbld' 277 278# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 279# if the 'N' option is not specified, is to run this test. 280#CHECK_PATHS='y' 281 282if [[ "$ENABLE_SMATCH" == "1" ]]; then 283 SMATCHBIN=$CODEMGR_WS/usr/src/tools/proto/root_$MACH-nd/opt/onbld/bin/$MACH/smatch 284 export SHADOW_CCS="$SHADOW_CCS smatch,$SMATCHBIN,smatch" 285fi 286