1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# Copyright (c) 2012, 2017 by Delphix. All rights reserved. 26# Copyright 2016 Nexenta Systems, Inc. 27# Copyright (c) 2017 Datto Inc. 28# 29 30. ${STF_TOOLS}/contrib/include/logapi.shlib 31 32# Determine whether a dataset is mounted 33# 34# $1 dataset name 35# $2 filesystem type; optional - defaulted to zfs 36# 37# Return 0 if dataset is mounted; 1 if unmounted; 2 on error 38 39function ismounted 40{ 41 typeset fstype=$2 42 [[ -z $fstype ]] && fstype=zfs 43 typeset out dir name ret 44 45 case $fstype in 46 zfs) 47 if [[ "$1" == "/"* ]] ; then 48 for out in $(zfs mount | awk '{print $2}'); do 49 [[ $1 == $out ]] && return 0 50 done 51 else 52 for out in $(zfs mount | awk '{print $1}'); do 53 [[ $1 == $out ]] && return 0 54 done 55 fi 56 ;; 57 ufs|nfs) 58 out=$(df -F $fstype $1 2>/dev/null) 59 ret=$? 60 (($ret != 0)) && return $ret 61 62 dir=${out%%\(*} 63 dir=${dir%% *} 64 name=${out##*\(} 65 name=${name%%\)*} 66 name=${name%% *} 67 68 [[ "$1" == "$dir" || "$1" == "$name" ]] && return 0 69 ;; 70 esac 71 72 return 1 73} 74 75# Return 0 if a dataset is mounted; 1 otherwise 76# 77# $1 dataset name 78# $2 filesystem type; optional - defaulted to zfs 79 80function mounted 81{ 82 ismounted $1 $2 83 (($? == 0)) && return 0 84 return 1 85} 86 87# Return 0 if a dataset is unmounted; 1 otherwise 88# 89# $1 dataset name 90# $2 filesystem type; optional - defaulted to zfs 91 92function unmounted 93{ 94 ismounted $1 $2 95 (($? == 1)) && return 0 96 return 1 97} 98 99# split line on "," 100# 101# $1 - line to split 102 103function splitline 104{ 105 echo $1 | sed "s/,/ /g" 106} 107 108function default_setup 109{ 110 default_setup_noexit "$@" 111 112 log_pass 113} 114 115# 116# Given a list of disks, setup storage pools and datasets. 117# 118function default_setup_noexit 119{ 120 typeset disklist=$1 121 typeset container=$2 122 typeset volume=$3 123 124 if is_global_zone; then 125 if poolexists $TESTPOOL ; then 126 destroy_pool $TESTPOOL 127 fi 128 [[ -d /$TESTPOOL ]] && rm -rf /$TESTPOOL 129 log_must zpool create -f $TESTPOOL $disklist 130 else 131 reexport_pool 132 fi 133 134 rm -rf $TESTDIR || log_unresolved Could not remove $TESTDIR 135 mkdir -p $TESTDIR || log_unresolved Could not create $TESTDIR 136 137 log_must zfs create $TESTPOOL/$TESTFS 138 log_must zfs set mountpoint=$TESTDIR $TESTPOOL/$TESTFS 139 140 if [[ -n $container ]]; then 141 rm -rf $TESTDIR1 || \ 142 log_unresolved Could not remove $TESTDIR1 143 mkdir -p $TESTDIR1 || \ 144 log_unresolved Could not create $TESTDIR1 145 146 log_must zfs create $TESTPOOL/$TESTCTR 147 log_must zfs set canmount=off $TESTPOOL/$TESTCTR 148 log_must zfs create $TESTPOOL/$TESTCTR/$TESTFS1 149 log_must zfs set mountpoint=$TESTDIR1 \ 150 $TESTPOOL/$TESTCTR/$TESTFS1 151 fi 152 153 if [[ -n $volume ]]; then 154 if is_global_zone ; then 155 log_must zfs create -V $VOLSIZE $TESTPOOL/$TESTVOL 156 else 157 log_must zfs create $TESTPOOL/$TESTVOL 158 fi 159 fi 160} 161 162# 163# Given a list of disks, setup a storage pool, file system and 164# a container. 165# 166function default_container_setup 167{ 168 typeset disklist=$1 169 170 default_setup "$disklist" "true" 171} 172 173# 174# Given a list of disks, setup a storage pool,file system 175# and a volume. 176# 177function default_volume_setup 178{ 179 typeset disklist=$1 180 181 default_setup "$disklist" "" "true" 182} 183 184# 185# Given a list of disks, setup a storage pool,file system, 186# a container and a volume. 187# 188function default_container_volume_setup 189{ 190 typeset disklist=$1 191 192 default_setup "$disklist" "true" "true" 193} 194 195# 196# Create a snapshot on a filesystem or volume. Defaultly create a snapshot on 197# filesystem 198# 199# $1 Existing filesystem or volume name. Default, $TESTPOOL/$TESTFS 200# $2 snapshot name. Default, $TESTSNAP 201# 202function create_snapshot 203{ 204 typeset fs_vol=${1:-$TESTPOOL/$TESTFS} 205 typeset snap=${2:-$TESTSNAP} 206 207 [[ -z $fs_vol ]] && log_fail "Filesystem or volume's name is undefined." 208 [[ -z $snap ]] && log_fail "Snapshot's name is undefined." 209 210 if snapexists $fs_vol@$snap; then 211 log_fail "$fs_vol@$snap already exists." 212 fi 213 datasetexists $fs_vol || \ 214 log_fail "$fs_vol must exist." 215 216 log_must zfs snapshot $fs_vol@$snap 217} 218 219# 220# Create a clone from a snapshot, default clone name is $TESTCLONE. 221# 222# $1 Existing snapshot, $TESTPOOL/$TESTFS@$TESTSNAP is default. 223# $2 Clone name, $TESTPOOL/$TESTCLONE is default. 224# 225function create_clone # snapshot clone 226{ 227 typeset snap=${1:-$TESTPOOL/$TESTFS@$TESTSNAP} 228 typeset clone=${2:-$TESTPOOL/$TESTCLONE} 229 230 [[ -z $snap ]] && \ 231 log_fail "Snapshot name is undefined." 232 [[ -z $clone ]] && \ 233 log_fail "Clone name is undefined." 234 235 log_must zfs clone $snap $clone 236} 237 238# 239# Create a bookmark of the given snapshot. Defaultly create a bookmark on 240# filesystem. 241# 242# $1 Existing filesystem or volume name. Default, $TESTFS 243# $2 Existing snapshot name. Default, $TESTSNAP 244# $3 bookmark name. Default, $TESTBKMARK 245# 246function create_bookmark 247{ 248 typeset fs_vol=${1:-$TESTFS} 249 typeset snap=${2:-$TESTSNAP} 250 typeset bkmark=${3:-$TESTBKMARK} 251 252 [[ -z $fs_vol ]] && log_fail "Filesystem or volume's name is undefined." 253 [[ -z $snap ]] && log_fail "Snapshot's name is undefined." 254 [[ -z $bkmark ]] && log_fail "Bookmark's name is undefined." 255 256 if bkmarkexists $fs_vol#$bkmark; then 257 log_fail "$fs_vol#$bkmark already exists." 258 fi 259 datasetexists $fs_vol || \ 260 log_fail "$fs_vol must exist." 261 snapexists $fs_vol@$snap || \ 262 log_fail "$fs_vol@$snap must exist." 263 264 log_must zfs bookmark $fs_vol@$snap $fs_vol#$bkmark 265} 266 267# 268# Create a temporary clone result of an interrupted resumable 'zfs receive' 269# $1 Destination filesystem name. Must not exist, will be created as the result 270# of this function along with its %recv temporary clone 271# $2 Source filesystem name. Must not exist, will be created and destroyed 272# 273function create_recv_clone 274{ 275 typeset recvfs="$1" 276 typeset sendfs="${2:-$TESTPOOL/create_recv_clone}" 277 typeset snap="$sendfs@snap1" 278 typeset incr="$sendfs@snap2" 279 typeset mountpoint="$TESTDIR/create_recv_clone" 280 typeset sendfile="$TESTDIR/create_recv_clone.zsnap" 281 282 [[ -z $recvfs ]] && log_fail "Recv filesystem's name is undefined." 283 284 datasetexists $recvfs && log_fail "Recv filesystem must not exist." 285 datasetexists $sendfs && log_fail "Send filesystem must not exist." 286 287 log_must zfs create -o mountpoint="$mountpoint" $sendfs 288 log_must zfs snapshot $snap 289 log_must eval "zfs send $snap | zfs recv -u $recvfs" 290 log_must mkfile 1m "$mountpoint/data" 291 log_must zfs snapshot $incr 292 log_must eval "zfs send -i $snap $incr | dd bs=10k count=1 > $sendfile" 293 log_mustnot eval "zfs recv -su $recvfs < $sendfile" 294 log_must zfs destroy -r $sendfs 295 log_must rm -f "$sendfile" 296 297 if [[ $(get_prop 'inconsistent' "$recvfs/%recv") -ne 1 ]]; then 298 log_fail "Error creating temporary $recvfs/%recv clone" 299 fi 300} 301 302function default_mirror_setup 303{ 304 default_mirror_setup_noexit $1 $2 $3 305 306 log_pass 307} 308 309# 310# Given a pair of disks, set up a storage pool and dataset for the mirror 311# @parameters: $1 the primary side of the mirror 312# $2 the secondary side of the mirror 313# @uses: ZPOOL ZFS TESTPOOL TESTFS 314function default_mirror_setup_noexit 315{ 316 readonly func="default_mirror_setup_noexit" 317 typeset primary=$1 318 typeset secondary=$2 319 320 [[ -z $primary ]] && \ 321 log_fail "$func: No parameters passed" 322 [[ -z $secondary ]] && \ 323 log_fail "$func: No secondary partition passed" 324 [[ -d /$TESTPOOL ]] && rm -rf /$TESTPOOL 325 log_must zpool create -f $TESTPOOL mirror $@ 326 log_must zfs create $TESTPOOL/$TESTFS 327 log_must zfs set mountpoint=$TESTDIR $TESTPOOL/$TESTFS 328} 329 330# 331# create a number of mirrors. 332# We create a number($1) of 2 way mirrors using the pairs of disks named 333# on the command line. These mirrors are *not* mounted 334# @parameters: $1 the number of mirrors to create 335# $... the devices to use to create the mirrors on 336# @uses: ZPOOL ZFS TESTPOOL 337function setup_mirrors 338{ 339 typeset -i nmirrors=$1 340 341 shift 342 while ((nmirrors > 0)); do 343 log_must test -n "$1" -a -n "$2" 344 [[ -d /$TESTPOOL$nmirrors ]] && rm -rf /$TESTPOOL$nmirrors 345 log_must zpool create -f $TESTPOOL$nmirrors mirror $1 $2 346 shift 2 347 ((nmirrors = nmirrors - 1)) 348 done 349} 350 351# 352# create a number of raidz pools. 353# We create a number($1) of 2 raidz pools using the pairs of disks named 354# on the command line. These pools are *not* mounted 355# @parameters: $1 the number of pools to create 356# $... the devices to use to create the pools on 357# @uses: ZPOOL ZFS TESTPOOL 358function setup_raidzs 359{ 360 typeset -i nraidzs=$1 361 362 shift 363 while ((nraidzs > 0)); do 364 log_must test -n "$1" -a -n "$2" 365 [[ -d /$TESTPOOL$nraidzs ]] && rm -rf /$TESTPOOL$nraidzs 366 log_must zpool create -f $TESTPOOL$nraidzs raidz $1 $2 367 shift 2 368 ((nraidzs = nraidzs - 1)) 369 done 370} 371 372# 373# Destroy the configured testpool mirrors. 374# the mirrors are of the form ${TESTPOOL}{number} 375# @uses: ZPOOL ZFS TESTPOOL 376function destroy_mirrors 377{ 378 default_cleanup_noexit 379 380 log_pass 381} 382 383# 384# Given a minimum of two disks, set up a storage pool and dataset for the raid-z 385# $1 the list of disks 386# 387function default_raidz_setup 388{ 389 typeset disklist="$*" 390 disks=(${disklist[*]}) 391 392 if [[ ${#disks[*]} -lt 2 ]]; then 393 log_fail "A raid-z requires a minimum of two disks." 394 fi 395 396 [[ -d /$TESTPOOL ]] && rm -rf /$TESTPOOL 397 log_must zpool create -f $TESTPOOL raidz $1 $2 $3 398 log_must zfs create $TESTPOOL/$TESTFS 399 log_must zfs set mountpoint=$TESTDIR $TESTPOOL/$TESTFS 400 401 log_pass 402} 403 404# 405# Common function used to cleanup storage pools and datasets. 406# 407# Invoked at the start of the test suite to ensure the system 408# is in a known state, and also at the end of each set of 409# sub-tests to ensure errors from one set of tests doesn't 410# impact the execution of the next set. 411 412function default_cleanup 413{ 414 default_cleanup_noexit 415 416 log_pass 417} 418 419function default_cleanup_noexit 420{ 421 typeset exclude="" 422 typeset pool="" 423 # 424 # Destroying the pool will also destroy any 425 # filesystems it contains. 426 # 427 if is_global_zone; then 428 zfs unmount -a > /dev/null 2>&1 429 exclude=`eval echo \"'(${KEEP})'\"` 430 ALL_POOLS=$(zpool list -H -o name \ 431 | grep -v "$NO_POOLS" | egrep -v "$exclude") 432 # Here, we loop through the pools we're allowed to 433 # destroy, only destroying them if it's safe to do 434 # so. 435 while [ ! -z ${ALL_POOLS} ] 436 do 437 for pool in ${ALL_POOLS} 438 do 439 if safe_to_destroy_pool $pool ; 440 then 441 destroy_pool $pool 442 fi 443 ALL_POOLS=$(zpool list -H -o name \ 444 | grep -v "$NO_POOLS" \ 445 | egrep -v "$exclude") 446 done 447 done 448 449 zfs mount -a 450 else 451 typeset fs="" 452 for fs in $(zfs list -H -o name \ 453 | grep "^$ZONE_POOL/$ZONE_CTR[01234]/"); do 454 datasetexists $fs && \ 455 log_must zfs destroy -Rf $fs 456 done 457 458 # Need cleanup here to avoid garbage dir left. 459 for fs in $(zfs list -H -o name); do 460 [[ $fs == /$ZONE_POOL ]] && continue 461 [[ -d $fs ]] && log_must rm -rf $fs/* 462 done 463 464 # 465 # Reset the $ZONE_POOL/$ZONE_CTR[01234] file systems property to 466 # the default value 467 # 468 for fs in $(zfs list -H -o name); do 469 if [[ $fs == $ZONE_POOL/$ZONE_CTR[01234] ]]; then 470 log_must zfs set reservation=none $fs 471 log_must zfs set recordsize=128K $fs 472 log_must zfs set mountpoint=/$fs $fs 473 typeset enc="" 474 enc=$(get_prop encryption $fs) 475 if [[ $? -ne 0 ]] || [[ -z "$enc" ]] || \ 476 [[ "$enc" == "off" ]]; then 477 log_must zfs set checksum=on $fs 478 fi 479 log_must zfs set compression=off $fs 480 log_must zfs set atime=on $fs 481 log_must zfs set devices=off $fs 482 log_must zfs set exec=on $fs 483 log_must zfs set setuid=on $fs 484 log_must zfs set readonly=off $fs 485 log_must zfs set snapdir=hidden $fs 486 log_must zfs set aclmode=groupmask $fs 487 log_must zfs set aclinherit=secure $fs 488 fi 489 done 490 fi 491 492 [[ -d $TESTDIR ]] && \ 493 log_must rm -rf $TESTDIR 494} 495 496 497# 498# Common function used to cleanup storage pools, file systems 499# and containers. 500# 501function default_container_cleanup 502{ 503 if ! is_global_zone; then 504 reexport_pool 505 fi 506 507 ismounted $TESTPOOL/$TESTCTR/$TESTFS1 508 [[ $? -eq 0 ]] && \ 509 log_must zfs unmount $TESTPOOL/$TESTCTR/$TESTFS1 510 511 datasetexists $TESTPOOL/$TESTCTR/$TESTFS1 && \ 512 log_must zfs destroy -R $TESTPOOL/$TESTCTR/$TESTFS1 513 514 datasetexists $TESTPOOL/$TESTCTR && \ 515 log_must zfs destroy -Rf $TESTPOOL/$TESTCTR 516 517 [[ -e $TESTDIR1 ]] && \ 518 log_must rm -rf $TESTDIR1 > /dev/null 2>&1 519 520 default_cleanup 521} 522 523# 524# Common function used to cleanup snapshot of file system or volume. Default to 525# delete the file system's snapshot 526# 527# $1 snapshot name 528# 529function destroy_snapshot 530{ 531 typeset snap=${1:-$TESTPOOL/$TESTFS@$TESTSNAP} 532 533 if ! snapexists $snap; then 534 log_fail "'$snap' does not existed." 535 fi 536 537 # 538 # For the sake of the value which come from 'get_prop' is not equal 539 # to the really mountpoint when the snapshot is unmounted. So, firstly 540 # check and make sure this snapshot's been mounted in current system. 541 # 542 typeset mtpt="" 543 if ismounted $snap; then 544 mtpt=$(get_prop mountpoint $snap) 545 (($? != 0)) && \ 546 log_fail "get_prop mountpoint $snap failed." 547 fi 548 549 log_must zfs destroy $snap 550 [[ $mtpt != "" && -d $mtpt ]] && \ 551 log_must rm -rf $mtpt 552} 553 554# 555# Common function used to cleanup clone. 556# 557# $1 clone name 558# 559function destroy_clone 560{ 561 typeset clone=${1:-$TESTPOOL/$TESTCLONE} 562 563 if ! datasetexists $clone; then 564 log_fail "'$clone' does not existed." 565 fi 566 567 # With the same reason in destroy_snapshot 568 typeset mtpt="" 569 if ismounted $clone; then 570 mtpt=$(get_prop mountpoint $clone) 571 (($? != 0)) && \ 572 log_fail "get_prop mountpoint $clone failed." 573 fi 574 575 log_must zfs destroy $clone 576 [[ $mtpt != "" && -d $mtpt ]] && \ 577 log_must rm -rf $mtpt 578} 579 580# 581# Common function used to cleanup bookmark of file system or volume. Default 582# to delete the file system's bookmark. 583# 584# $1 bookmark name 585# 586function destroy_bookmark 587{ 588 typeset bkmark=${1:-$TESTPOOL/$TESTFS#$TESTBKMARK} 589 590 if ! bkmarkexists $bkmark; then 591 log_fail "'$bkmarkp' does not existed." 592 fi 593 594 log_must zfs destroy $bkmark 595} 596 597# Return 0 if a snapshot exists; $? otherwise 598# 599# $1 - snapshot name 600 601function snapexists 602{ 603 zfs list -H -t snapshot "$1" > /dev/null 2>&1 604 return $? 605} 606 607# 608# Return 0 if a bookmark exists; $? otherwise 609# 610# $1 - bookmark name 611# 612function bkmarkexists 613{ 614 zfs list -H -t bookmark "$1" > /dev/null 2>&1 615 return $? 616} 617 618# 619# Set a property to a certain value on a dataset. 620# Sets a property of the dataset to the value as passed in. 621# @param: 622# $1 dataset who's property is being set 623# $2 property to set 624# $3 value to set property to 625# @return: 626# 0 if the property could be set. 627# non-zero otherwise. 628# @use: ZFS 629# 630function dataset_setprop 631{ 632 typeset fn=dataset_setprop 633 634 if (($# < 3)); then 635 log_note "$fn: Insufficient parameters (need 3, had $#)" 636 return 1 637 fi 638 typeset output= 639 output=$(zfs set $2=$3 $1 2>&1) 640 typeset rv=$? 641 if ((rv != 0)); then 642 log_note "Setting property on $1 failed." 643 log_note "property $2=$3" 644 log_note "Return Code: $rv" 645 log_note "Output: $output" 646 return $rv 647 fi 648 return 0 649} 650 651# 652# Assign suite defined dataset properties. 653# This function is used to apply the suite's defined default set of 654# properties to a dataset. 655# @parameters: $1 dataset to use 656# @uses: ZFS COMPRESSION_PROP CHECKSUM_PROP 657# @returns: 658# 0 if the dataset has been altered. 659# 1 if no pool name was passed in. 660# 2 if the dataset could not be found. 661# 3 if the dataset could not have it's properties set. 662# 663function dataset_set_defaultproperties 664{ 665 typeset dataset="$1" 666 667 [[ -z $dataset ]] && return 1 668 669 typeset confset= 670 typeset -i found=0 671 for confset in $(zfs list); do 672 if [[ $dataset = $confset ]]; then 673 found=1 674 break 675 fi 676 done 677 [[ $found -eq 0 ]] && return 2 678 if [[ -n $COMPRESSION_PROP ]]; then 679 dataset_setprop $dataset compression $COMPRESSION_PROP || \ 680 return 3 681 log_note "Compression set to '$COMPRESSION_PROP' on $dataset" 682 fi 683 if [[ -n $CHECKSUM_PROP ]]; then 684 dataset_setprop $dataset checksum $CHECKSUM_PROP || \ 685 return 3 686 log_note "Checksum set to '$CHECKSUM_PROP' on $dataset" 687 fi 688 return 0 689} 690 691# 692# Check a numeric assertion 693# @parameter: $@ the assertion to check 694# @output: big loud notice if assertion failed 695# @use: log_fail 696# 697function assert 698{ 699 (($@)) || log_fail "$@" 700} 701 702# 703# Function to format partition size of a disk 704# Given a disk cxtxdx reduces all partitions 705# to 0 size 706# 707function zero_partitions #<whole_disk_name> 708{ 709 typeset diskname=$1 710 typeset i 711 712 for i in 0 1 3 4 5 6 7 713 do 714 set_partition $i "" 0mb $diskname 715 done 716} 717 718# 719# Given a slice, size and disk, this function 720# formats the slice to the specified size. 721# Size should be specified with units as per 722# the `format` command requirements eg. 100mb 3gb 723# 724function set_partition #<slice_num> <slice_start> <size_plus_units> <whole_disk_name> 725{ 726 typeset -i slicenum=$1 727 typeset start=$2 728 typeset size=$3 729 typeset disk=$4 730 [[ -z $slicenum || -z $size || -z $disk ]] && \ 731 log_fail "The slice, size or disk name is unspecified." 732 typeset format_file=/var/tmp/format_in.$$ 733 734 echo "partition" >$format_file 735 echo "$slicenum" >> $format_file 736 echo "" >> $format_file 737 echo "" >> $format_file 738 echo "$start" >> $format_file 739 echo "$size" >> $format_file 740 echo "label" >> $format_file 741 echo "" >> $format_file 742 echo "q" >> $format_file 743 echo "q" >> $format_file 744 745 format -e -s -d $disk -f $format_file 746 typeset ret_val=$? 747 rm -f $format_file 748 [[ $ret_val -ne 0 ]] && \ 749 log_fail "Unable to format $disk slice $slicenum to $size" 750 return 0 751} 752 753# 754# Get the end cyl of the given slice 755# 756function get_endslice #<disk> <slice> 757{ 758 typeset disk=$1 759 typeset slice=$2 760 if [[ -z $disk || -z $slice ]] ; then 761 log_fail "The disk name or slice number is unspecified." 762 fi 763 764 disk=${disk#/dev/dsk/} 765 disk=${disk#/dev/rdsk/} 766 disk=${disk%s*} 767 768 typeset -i ratio=0 769 ratio=$(prtvtoc /dev/rdsk/${disk}s2 | \ 770 grep "sectors\/cylinder" | \ 771 awk '{print $2}') 772 773 if ((ratio == 0)); then 774 return 775 fi 776 777 typeset -i endcyl=$(prtvtoc -h /dev/rdsk/${disk}s2 | 778 nawk -v token="$slice" '{if ($1==token) print $6}') 779 780 ((endcyl = (endcyl + 1) / ratio)) 781 echo $endcyl 782} 783 784 785# 786# Given a size,disk and total slice number, this function formats the 787# disk slices from 0 to the total slice number with the same specified 788# size. 789# 790function partition_disk #<slice_size> <whole_disk_name> <total_slices> 791{ 792 typeset -i i=0 793 typeset slice_size=$1 794 typeset disk_name=$2 795 typeset total_slices=$3 796 typeset cyl 797 798 zero_partitions $disk_name 799 while ((i < $total_slices)); do 800 if ((i == 2)); then 801 ((i = i + 1)) 802 continue 803 fi 804 set_partition $i "$cyl" $slice_size $disk_name 805 cyl=$(get_endslice $disk_name $i) 806 ((i = i+1)) 807 done 808} 809 810# 811# This function continues to write to a filenum number of files into dirnum 812# number of directories until either file_write returns an error or the 813# maximum number of files per directory have been written. 814# 815# Usage: 816# fill_fs [destdir] [dirnum] [filenum] [bytes] [num_writes] [data] 817# 818# Return value: 0 on success 819# non 0 on error 820# 821# Where : 822# destdir: is the directory where everything is to be created under 823# dirnum: the maximum number of subdirectories to use, -1 no limit 824# filenum: the maximum number of files per subdirectory 825# bytes: number of bytes to write 826# num_writes: numer of types to write out bytes 827# data: the data that will be writen 828# 829# E.g. 830# file_fs /testdir 20 25 1024 256 0 831# 832# Note: bytes * num_writes equals the size of the testfile 833# 834function fill_fs # destdir dirnum filenum bytes num_writes data 835{ 836 typeset destdir=${1:-$TESTDIR} 837 typeset -i dirnum=${2:-50} 838 typeset -i filenum=${3:-50} 839 typeset -i bytes=${4:-8192} 840 typeset -i num_writes=${5:-10240} 841 typeset -i data=${6:-0} 842 843 typeset -i odirnum=1 844 typeset -i idirnum=0 845 typeset -i fn=0 846 typeset -i retval=0 847 848 log_must mkdir -p $destdir/$idirnum 849 while (($odirnum > 0)); do 850 if ((dirnum >= 0 && idirnum >= dirnum)); then 851 odirnum=0 852 break 853 fi 854 file_write -o create -f $destdir/$idirnum/$TESTFILE.$fn \ 855 -b $bytes -c $num_writes -d $data 856 retval=$? 857 if (($retval != 0)); then 858 odirnum=0 859 break 860 fi 861 if (($fn >= $filenum)); then 862 fn=0 863 ((idirnum = idirnum + 1)) 864 log_must mkdir -p $destdir/$idirnum 865 else 866 ((fn = fn + 1)) 867 fi 868 done 869 return $retval 870} 871 872# 873# Simple function to get the specified property. If unable to 874# get the property then exits. 875# 876# Note property is in 'parsable' format (-p) 877# 878function get_prop # property dataset 879{ 880 typeset prop_val 881 typeset prop=$1 882 typeset dataset=$2 883 884 prop_val=$(zfs get -pH -o value $prop $dataset 2>/dev/null) 885 if [[ $? -ne 0 ]]; then 886 log_note "Unable to get $prop property for dataset " \ 887 "$dataset" 888 return 1 889 fi 890 891 echo "$prop_val" 892 return 0 893} 894 895# 896# Simple function to get the specified property of pool. If unable to 897# get the property then exits. 898# 899function get_pool_prop # property pool 900{ 901 typeset prop_val 902 typeset prop=$1 903 typeset pool=$2 904 905 if poolexists $pool ; then 906 prop_val=$(zpool get $prop $pool 2>/dev/null | tail -1 | \ 907 awk '{print $3}') 908 if [[ $? -ne 0 ]]; then 909 log_note "Unable to get $prop property for pool " \ 910 "$pool" 911 return 1 912 fi 913 else 914 log_note "Pool $pool not exists." 915 return 1 916 fi 917 918 echo $prop_val 919 return 0 920} 921 922# Return 0 if a pool exists; $? otherwise 923# 924# $1 - pool name 925 926function poolexists 927{ 928 typeset pool=$1 929 930 if [[ -z $pool ]]; then 931 log_note "No pool name given." 932 return 1 933 fi 934 935 zpool get name "$pool" > /dev/null 2>&1 936 return $? 937} 938 939# Return 0 if all the specified datasets exist; $? otherwise 940# 941# $1-n dataset name 942function datasetexists 943{ 944 if (($# == 0)); then 945 log_note "No dataset name given." 946 return 1 947 fi 948 949 while (($# > 0)); do 950 zfs get name $1 > /dev/null 2>&1 || \ 951 return $? 952 shift 953 done 954 955 return 0 956} 957 958# return 0 if none of the specified datasets exists, otherwise return 1. 959# 960# $1-n dataset name 961function datasetnonexists 962{ 963 if (($# == 0)); then 964 log_note "No dataset name given." 965 return 1 966 fi 967 968 while (($# > 0)); do 969 zfs list -H -t filesystem,snapshot,volume $1 > /dev/null 2>&1 \ 970 && return 1 971 shift 972 done 973 974 return 0 975} 976 977# 978# Given a mountpoint, or a dataset name, determine if it is shared. 979# 980# Returns 0 if shared, 1 otherwise. 981# 982function is_shared 983{ 984 typeset fs=$1 985 typeset mtpt 986 987 if [[ $fs != "/"* ]] ; then 988 if datasetnonexists "$fs" ; then 989 return 1 990 else 991 mtpt=$(get_prop mountpoint "$fs") 992 case $mtpt in 993 none|legacy|-) return 1 994 ;; 995 *) fs=$mtpt 996 ;; 997 esac 998 fi 999 fi 1000 1001 for mtpt in `share | awk '{print $2}'` ; do 1002 if [[ $mtpt == $fs ]] ; then 1003 return 0 1004 fi 1005 done 1006 1007 typeset stat=$(svcs -H -o STA nfs/server:default) 1008 if [[ $stat != "ON" ]]; then 1009 log_note "Current nfs/server status: $stat" 1010 fi 1011 1012 return 1 1013} 1014 1015# 1016# Given a mountpoint, determine if it is not shared. 1017# 1018# Returns 0 if not shared, 1 otherwise. 1019# 1020function not_shared 1021{ 1022 typeset fs=$1 1023 1024 is_shared $fs 1025 if (($? == 0)); then 1026 return 1 1027 fi 1028 1029 return 0 1030} 1031 1032# 1033# Helper function to unshare a mountpoint. 1034# 1035function unshare_fs #fs 1036{ 1037 typeset fs=$1 1038 1039 is_shared $fs 1040 if (($? == 0)); then 1041 log_must zfs unshare $fs 1042 fi 1043 1044 return 0 1045} 1046 1047# 1048# Check NFS server status and trigger it online. 1049# 1050function setup_nfs_server 1051{ 1052 # Cannot share directory in non-global zone. 1053 # 1054 if ! is_global_zone; then 1055 log_note "Cannot trigger NFS server by sharing in LZ." 1056 return 1057 fi 1058 1059 typeset nfs_fmri="svc:/network/nfs/server:default" 1060 if [[ $(svcs -Ho STA $nfs_fmri) != "ON" ]]; then 1061 # 1062 # Only really sharing operation can enable NFS server 1063 # to online permanently. 1064 # 1065 typeset dummy=/tmp/dummy 1066 1067 if [[ -d $dummy ]]; then 1068 log_must rm -rf $dummy 1069 fi 1070 1071 log_must mkdir $dummy 1072 log_must share $dummy 1073 1074 # 1075 # Waiting for fmri's status to be the final status. 1076 # Otherwise, in transition, an asterisk (*) is appended for 1077 # instances, unshare will reverse status to 'DIS' again. 1078 # 1079 # Waiting for 1's at least. 1080 # 1081 log_must sleep 1 1082 timeout=10 1083 while [[ timeout -ne 0 && $(svcs -Ho STA $nfs_fmri) == *'*' ]] 1084 do 1085 log_must sleep 1 1086 1087 ((timeout -= 1)) 1088 done 1089 1090 log_must unshare $dummy 1091 log_must rm -rf $dummy 1092 fi 1093 1094 log_note "Current NFS status: '$(svcs -Ho STA,FMRI $nfs_fmri)'" 1095} 1096 1097# 1098# To verify whether calling process is in global zone 1099# 1100# Return 0 if in global zone, 1 in non-global zone 1101# 1102function is_global_zone 1103{ 1104 typeset cur_zone=$(zonename 2>/dev/null) 1105 if [[ $cur_zone != "global" ]]; then 1106 return 1 1107 fi 1108 return 0 1109} 1110 1111# 1112# Verify whether test is permitted to run from 1113# global zone, local zone, or both 1114# 1115# $1 zone limit, could be "global", "local", or "both"(no limit) 1116# 1117# Return 0 if permitted, otherwise exit with log_unsupported 1118# 1119function verify_runnable # zone limit 1120{ 1121 typeset limit=$1 1122 1123 [[ -z $limit ]] && return 0 1124 1125 if is_global_zone ; then 1126 case $limit in 1127 global|both) 1128 ;; 1129 local) log_unsupported "Test is unable to run from "\ 1130 "global zone." 1131 ;; 1132 *) log_note "Warning: unknown limit $limit - " \ 1133 "use both." 1134 ;; 1135 esac 1136 else 1137 case $limit in 1138 local|both) 1139 ;; 1140 global) log_unsupported "Test is unable to run from "\ 1141 "local zone." 1142 ;; 1143 *) log_note "Warning: unknown limit $limit - " \ 1144 "use both." 1145 ;; 1146 esac 1147 1148 reexport_pool 1149 fi 1150 1151 return 0 1152} 1153 1154# Return 0 if create successfully or the pool exists; $? otherwise 1155# Note: In local zones, this function should return 0 silently. 1156# 1157# $1 - pool name 1158# $2-n - [keyword] devs_list 1159 1160function create_pool #pool devs_list 1161{ 1162 typeset pool=${1%%/*} 1163 1164 shift 1165 1166 if [[ -z $pool ]]; then 1167 log_note "Missing pool name." 1168 return 1 1169 fi 1170 1171 if poolexists $pool ; then 1172 destroy_pool $pool 1173 fi 1174 1175 if is_global_zone ; then 1176 [[ -d /$pool ]] && rm -rf /$pool 1177 log_must zpool create -f $pool $@ 1178 fi 1179 1180 return 0 1181} 1182 1183# Return 0 if destroy successfully or the pool exists; $? otherwise 1184# Note: In local zones, this function should return 0 silently. 1185# 1186# $1 - pool name 1187# Destroy pool with the given parameters. 1188 1189function destroy_pool #pool 1190{ 1191 typeset pool=${1%%/*} 1192 typeset mtpt 1193 1194 if [[ -z $pool ]]; then 1195 log_note "No pool name given." 1196 return 1 1197 fi 1198 1199 if is_global_zone ; then 1200 if poolexists "$pool" ; then 1201 mtpt=$(get_prop mountpoint "$pool") 1202 1203 # At times, syseventd activity can cause attempts to 1204 # destroy a pool to fail with EBUSY. We retry a few 1205 # times allowing failures before requiring the destroy 1206 # to succeed. 1207 typeset -i wait_time=10 ret=1 count=0 1208 must="" 1209 while [[ $ret -ne 0 ]]; do 1210 $must zpool destroy -f $pool 1211 ret=$? 1212 [[ $ret -eq 0 ]] && break 1213 log_note "zpool destroy failed with $ret" 1214 [[ count++ -ge 7 ]] && must=log_must 1215 sleep $wait_time 1216 done 1217 1218 [[ -d $mtpt ]] && \ 1219 log_must rm -rf $mtpt 1220 else 1221 log_note "Pool does not exist. ($pool)" 1222 return 1 1223 fi 1224 fi 1225 1226 return 0 1227} 1228 1229# Return 0 if created successfully; $? otherwise 1230# 1231# $1 - dataset name 1232# $2-n - dataset options 1233 1234function create_dataset #dataset dataset_options 1235{ 1236 typeset dataset=$1 1237 1238 shift 1239 1240 if [[ -z $dataset ]]; then 1241 log_note "Missing dataset name." 1242 return 1 1243 fi 1244 1245 if datasetexists $dataset ; then 1246 destroy_dataset $dataset 1247 fi 1248 1249 log_must zfs create $@ $dataset 1250 1251 return 0 1252} 1253 1254# Return 0 if destroy successfully or the dataset exists; $? otherwise 1255# Note: In local zones, this function should return 0 silently. 1256# 1257# $1 - dataset name 1258 1259function destroy_dataset #dataset 1260{ 1261 typeset dataset=$1 1262 typeset mtpt 1263 1264 if [[ -z $dataset ]]; then 1265 log_note "No dataset name given." 1266 return 1 1267 fi 1268 1269 if datasetexists "$dataset" ; then 1270 mtpt=$(get_prop mountpoint "$dataset") 1271 log_must zfs destroy -r $dataset 1272 [[ -d $mtpt ]] && log_must rm -rf $mtpt 1273 else 1274 log_note "Dataset does not exist. ($dataset)" 1275 return 1 1276 fi 1277 1278 return 0 1279} 1280 1281# 1282# Firstly, create a pool with 5 datasets. Then, create a single zone and 1283# export the 5 datasets to it. In addition, we also add a ZFS filesystem 1284# and a zvol device to the zone. 1285# 1286# $1 zone name 1287# $2 zone root directory prefix 1288# $3 zone ip 1289# 1290function zfs_zones_setup #zone_name zone_root zone_ip 1291{ 1292 typeset zone_name=${1:-$(hostname)-z} 1293 typeset zone_root=${2:-"/zone_root"} 1294 typeset zone_ip=${3:-"10.1.1.10"} 1295 typeset prefix_ctr=$ZONE_CTR 1296 typeset pool_name=$ZONE_POOL 1297 typeset -i cntctr=5 1298 typeset -i i=0 1299 1300 # Create pool and 5 container within it 1301 # 1302 [[ -d /$pool_name ]] && rm -rf /$pool_name 1303 log_must zpool create -f $pool_name $DISKS 1304 while ((i < cntctr)); do 1305 log_must zfs create $pool_name/$prefix_ctr$i 1306 ((i += 1)) 1307 done 1308 1309 # create a zvol 1310 log_must zfs create -V 1g $pool_name/zone_zvol 1311 1312 # 1313 # If current system support slog, add slog device for pool 1314 # 1315 if verify_slog_support ; then 1316 typeset sdevs="/var/tmp/sdev1 /var/tmp/sdev2" 1317 log_must mkfile $MINVDEVSIZE $sdevs 1318 log_must zpool add $pool_name log mirror $sdevs 1319 fi 1320 1321 # this isn't supported just yet. 1322 # Create a filesystem. In order to add this to 1323 # the zone, it must have it's mountpoint set to 'legacy' 1324 # log_must zfs create $pool_name/zfs_filesystem 1325 # log_must zfs set mountpoint=legacy $pool_name/zfs_filesystem 1326 1327 [[ -d $zone_root ]] && \ 1328 log_must rm -rf $zone_root/$zone_name 1329 [[ ! -d $zone_root ]] && \ 1330 log_must mkdir -p -m 0700 $zone_root/$zone_name 1331 1332 # Create zone configure file and configure the zone 1333 # 1334 typeset zone_conf=/tmp/zone_conf.$$ 1335 echo "create" > $zone_conf 1336 echo "set zonepath=$zone_root/$zone_name" >> $zone_conf 1337 echo "set autoboot=true" >> $zone_conf 1338 i=0 1339 while ((i < cntctr)); do 1340 echo "add dataset" >> $zone_conf 1341 echo "set name=$pool_name/$prefix_ctr$i" >> \ 1342 $zone_conf 1343 echo "end" >> $zone_conf 1344 ((i += 1)) 1345 done 1346 1347 # add our zvol to the zone 1348 echo "add device" >> $zone_conf 1349 echo "set match=/dev/zvol/dsk/$pool_name/zone_zvol" >> $zone_conf 1350 echo "end" >> $zone_conf 1351 1352 # add a corresponding zvol rdsk to the zone 1353 echo "add device" >> $zone_conf 1354 echo "set match=/dev/zvol/rdsk/$pool_name/zone_zvol" >> $zone_conf 1355 echo "end" >> $zone_conf 1356 1357 # once it's supported, we'll add our filesystem to the zone 1358 # echo "add fs" >> $zone_conf 1359 # echo "set type=zfs" >> $zone_conf 1360 # echo "set special=$pool_name/zfs_filesystem" >> $zone_conf 1361 # echo "set dir=/export/zfs_filesystem" >> $zone_conf 1362 # echo "end" >> $zone_conf 1363 1364 echo "verify" >> $zone_conf 1365 echo "commit" >> $zone_conf 1366 log_must zonecfg -z $zone_name -f $zone_conf 1367 log_must rm -f $zone_conf 1368 1369 # Install the zone 1370 zoneadm -z $zone_name install 1371 if (($? == 0)); then 1372 log_note "SUCCESS: zoneadm -z $zone_name install" 1373 else 1374 log_fail "FAIL: zoneadm -z $zone_name install" 1375 fi 1376 1377 # Install sysidcfg file 1378 # 1379 typeset sysidcfg=$zone_root/$zone_name/root/etc/sysidcfg 1380 echo "system_locale=C" > $sysidcfg 1381 echo "terminal=dtterm" >> $sysidcfg 1382 echo "network_interface=primary {" >> $sysidcfg 1383 echo "hostname=$zone_name" >> $sysidcfg 1384 echo "}" >> $sysidcfg 1385 echo "name_service=NONE" >> $sysidcfg 1386 echo "root_password=mo791xfZ/SFiw" >> $sysidcfg 1387 echo "security_policy=NONE" >> $sysidcfg 1388 echo "timezone=US/Eastern" >> $sysidcfg 1389 1390 # Boot this zone 1391 log_must zoneadm -z $zone_name boot 1392} 1393 1394# 1395# Reexport TESTPOOL & TESTPOOL(1-4) 1396# 1397function reexport_pool 1398{ 1399 typeset -i cntctr=5 1400 typeset -i i=0 1401 1402 while ((i < cntctr)); do 1403 if ((i == 0)); then 1404 TESTPOOL=$ZONE_POOL/$ZONE_CTR$i 1405 if ! ismounted $TESTPOOL; then 1406 log_must zfs mount $TESTPOOL 1407 fi 1408 else 1409 eval TESTPOOL$i=$ZONE_POOL/$ZONE_CTR$i 1410 if eval ! ismounted \$TESTPOOL$i; then 1411 log_must eval zfs mount \$TESTPOOL$i 1412 fi 1413 fi 1414 ((i += 1)) 1415 done 1416} 1417 1418# 1419# Verify a given disk is online or offline 1420# 1421# Return 0 is pool/disk matches expected state, 1 otherwise 1422# 1423function check_state # pool disk state{online,offline} 1424{ 1425 typeset pool=$1 1426 typeset disk=${2#/dev/dsk/} 1427 typeset state=$3 1428 1429 zpool status -v $pool | grep "$disk" \ 1430 | grep -i "$state" > /dev/null 2>&1 1431 1432 return $? 1433} 1434 1435# 1436# Get the mountpoint of snapshot 1437# For the snapshot use <mp_filesystem>/.zfs/snapshot/<snap> 1438# as its mountpoint 1439# 1440function snapshot_mountpoint 1441{ 1442 typeset dataset=${1:-$TESTPOOL/$TESTFS@$TESTSNAP} 1443 1444 if [[ $dataset != *@* ]]; then 1445 log_fail "Error name of snapshot '$dataset'." 1446 fi 1447 1448 typeset fs=${dataset%@*} 1449 typeset snap=${dataset#*@} 1450 1451 if [[ -z $fs || -z $snap ]]; then 1452 log_fail "Error name of snapshot '$dataset'." 1453 fi 1454 1455 echo $(get_prop mountpoint $fs)/.zfs/snapshot/$snap 1456} 1457 1458# 1459# Given a pool and file system, this function will verify the file system 1460# using the zdb internal tool. Note that the pool is exported and imported 1461# to ensure it has consistent state. 1462# 1463function verify_filesys # pool filesystem dir 1464{ 1465 typeset pool="$1" 1466 typeset filesys="$2" 1467 typeset zdbout="/tmp/zdbout.$$" 1468 1469 shift 1470 shift 1471 typeset dirs=$@ 1472 typeset search_path="" 1473 1474 log_note "Calling zdb to verify filesystem '$filesys'" 1475 zfs unmount -a > /dev/null 2>&1 1476 log_must zpool export $pool 1477 1478 if [[ -n $dirs ]] ; then 1479 for dir in $dirs ; do 1480 search_path="$search_path -d $dir" 1481 done 1482 fi 1483 1484 log_must zpool import $search_path $pool 1485 1486 zdb -cudi $filesys > $zdbout 2>&1 1487 if [[ $? != 0 ]]; then 1488 log_note "Output: zdb -cudi $filesys" 1489 cat $zdbout 1490 log_fail "zdb detected errors with: '$filesys'" 1491 fi 1492 1493 log_must zfs mount -a 1494 log_must rm -rf $zdbout 1495} 1496 1497# 1498# Given a pool, and this function list all disks in the pool 1499# 1500function get_disklist # pool 1501{ 1502 typeset disklist="" 1503 1504 disklist=$(zpool iostat -v $1 | nawk '(NR >4) {print $1}' | \ 1505 grep -v "\-\-\-\-\-" | \ 1506 egrep -v -e "^(mirror|raidz1|raidz2|spare|log|cache)$") 1507 1508 echo $disklist 1509} 1510 1511# /** 1512# This function kills a given list of processes after a time period. We use 1513# this in the stress tests instead of STF_TIMEOUT so that we can have processes 1514# run for a fixed amount of time, yet still pass. Tests that hit STF_TIMEOUT 1515# would be listed as FAIL, which we don't want : we're happy with stress tests 1516# running for a certain amount of time, then finishing. 1517# 1518# @param $1 the time in seconds after which we should terminate these processes 1519# @param $2..$n the processes we wish to terminate. 1520# */ 1521function stress_timeout 1522{ 1523 typeset -i TIMEOUT=$1 1524 shift 1525 typeset cpids="$@" 1526 1527 log_note "Waiting for child processes($cpids). " \ 1528 "It could last dozens of minutes, please be patient ..." 1529 log_must sleep $TIMEOUT 1530 1531 log_note "Killing child processes after ${TIMEOUT} stress timeout." 1532 typeset pid 1533 for pid in $cpids; do 1534 ps -p $pid > /dev/null 2>&1 1535 if (($? == 0)); then 1536 log_must kill -USR1 $pid 1537 fi 1538 done 1539} 1540 1541# 1542# Verify a given hotspare disk is inuse or avail 1543# 1544# Return 0 is pool/disk matches expected state, 1 otherwise 1545# 1546function check_hotspare_state # pool disk state{inuse,avail} 1547{ 1548 typeset pool=$1 1549 typeset disk=${2#/dev/dsk/} 1550 typeset state=$3 1551 1552 cur_state=$(get_device_state $pool $disk "spares") 1553 1554 if [[ $state != ${cur_state} ]]; then 1555 return 1 1556 fi 1557 return 0 1558} 1559 1560# 1561# Wait until a hotspare transitions to a given state or times out. 1562# 1563# Return 0 when pool/disk matches expected state, 1 on timeout. 1564# 1565function wait_hotspare_state # pool disk state timeout 1566{ 1567 typeset pool=$1 1568 typeset disk=${2#$/DEV_DSKDIR/} 1569 typeset state=$3 1570 typeset timeout=${4:-60} 1571 typeset -i i=0 1572 1573 while [[ $i -lt $timeout ]]; do 1574 if check_hotspare_state $pool $disk $state; then 1575 return 0 1576 fi 1577 1578 i=$((i+1)) 1579 sleep 1 1580 done 1581 1582 return 1 1583} 1584 1585# 1586# Verify a given slog disk is inuse or avail 1587# 1588# Return 0 is pool/disk matches expected state, 1 otherwise 1589# 1590function check_slog_state # pool disk state{online,offline,unavail} 1591{ 1592 typeset pool=$1 1593 typeset disk=${2#/dev/dsk/} 1594 typeset state=$3 1595 1596 cur_state=$(get_device_state $pool $disk "logs") 1597 1598 if [[ $state != ${cur_state} ]]; then 1599 return 1 1600 fi 1601 return 0 1602} 1603 1604# 1605# Verify a given vdev disk is inuse or avail 1606# 1607# Return 0 is pool/disk matches expected state, 1 otherwise 1608# 1609function check_vdev_state # pool disk state{online,offline,unavail} 1610{ 1611 typeset pool=$1 1612 typeset disk=${2#/dev/dsk/} 1613 typeset state=$3 1614 1615 cur_state=$(get_device_state $pool $disk) 1616 1617 if [[ $state != ${cur_state} ]]; then 1618 return 1 1619 fi 1620 return 0 1621} 1622 1623# 1624# Wait until a vdev transitions to a given state or times out. 1625# 1626# Return 0 when pool/disk matches expected state, 1 on timeout. 1627# 1628function wait_vdev_state # pool disk state timeout 1629{ 1630 typeset pool=$1 1631 typeset disk=${2#$/DEV_DSKDIR/} 1632 typeset state=$3 1633 typeset timeout=${4:-60} 1634 typeset -i i=0 1635 1636 while [[ $i -lt $timeout ]]; do 1637 if check_vdev_state $pool $disk $state; then 1638 return 0 1639 fi 1640 1641 i=$((i+1)) 1642 sleep 1 1643 done 1644 1645 return 1 1646} 1647 1648# 1649# Check the output of 'zpool status -v <pool>', 1650# and to see if the content of <token> contain the <keyword> specified. 1651# 1652# Return 0 is contain, 1 otherwise 1653# 1654function check_pool_status # pool token keyword <verbose> 1655{ 1656 typeset pool=$1 1657 typeset token=$2 1658 typeset keyword=$3 1659 typeset verbose=${4:-false} 1660 1661 scan=$(zpool status -v "$pool" 2>/dev/null | nawk -v token="$token:" ' 1662 ($1==token) {print $0}') 1663 if [[ $verbose == true ]]; then 1664 log_note $scan 1665 fi 1666 echo $scan | grep -i "$keyword" > /dev/null 2>&1 1667 1668 return $? 1669} 1670 1671# 1672# These 6 following functions are instance of check_pool_status() 1673# is_pool_resilvering - to check if the pool is resilver in progress 1674# is_pool_resilvered - to check if the pool is resilver completed 1675# is_pool_scrubbing - to check if the pool is scrub in progress 1676# is_pool_scrubbed - to check if the pool is scrub completed 1677# is_pool_scrub_stopped - to check if the pool is scrub stopped 1678# is_pool_scrub_paused - to check if the pool has scrub paused 1679# is_pool_removing - to check if the pool is removing a vdev 1680# is_pool_removed - to check if the pool is remove completed 1681# 1682function is_pool_resilvering #pool <verbose> 1683{ 1684 check_pool_status "$1" "scan" "resilver in progress since " $2 1685 return $? 1686} 1687 1688function is_pool_resilvered #pool <verbose> 1689{ 1690 check_pool_status "$1" "scan" "resilvered " $2 1691 return $? 1692} 1693 1694function is_pool_scrubbing #pool <verbose> 1695{ 1696 check_pool_status "$1" "scan" "scrub in progress since " $2 1697 return $? 1698} 1699 1700function is_pool_scrubbed #pool <verbose> 1701{ 1702 check_pool_status "$1" "scan" "scrub repaired" $2 1703 return $? 1704} 1705 1706function is_pool_scrub_stopped #pool <verbose> 1707{ 1708 check_pool_status "$1" "scan" "scrub canceled" $2 1709 return $? 1710} 1711 1712function is_pool_scrub_paused #pool <verbose> 1713{ 1714 check_pool_status "$1" "scan" "scrub paused since " $2 1715 return $? 1716} 1717 1718function is_pool_removing #pool 1719{ 1720 check_pool_status "$1" "remove" "in progress since " 1721 return $? 1722} 1723 1724function is_pool_removed #pool 1725{ 1726 check_pool_status "$1" "remove" "completed on" 1727 return $? 1728} 1729 1730function wait_for_degraded 1731{ 1732 typeset pool=$1 1733 typeset timeout=${2:-30} 1734 typeset t0=$SECONDS 1735 1736 while :; do 1737 [[ $(get_pool_prop health $pool) == "DEGRADED" ]] && break 1738 log_note "$pool is not yet degraded." 1739 sleep 1 1740 if ((SECONDS - t0 > $timeout)); then 1741 log_note "$pool not degraded after $timeout seconds." 1742 return 1 1743 fi 1744 done 1745 1746 return 0 1747} 1748 1749# 1750# Use create_pool()/destroy_pool() to clean up the infomation in 1751# in the given disk to avoid slice overlapping. 1752# 1753function cleanup_devices #vdevs 1754{ 1755 typeset pool="foopool$$" 1756 1757 if poolexists $pool ; then 1758 destroy_pool $pool 1759 fi 1760 1761 create_pool $pool $@ 1762 destroy_pool $pool 1763 1764 return 0 1765} 1766 1767#/** 1768# A function to find and locate free disks on a system or from given 1769# disks as the parameter. It works by locating disks that are in use 1770# as swap devices and dump devices, and also disks listed in /etc/vfstab 1771# 1772# $@ given disks to find which are free, default is all disks in 1773# the test system 1774# 1775# @return a string containing the list of available disks 1776#*/ 1777function find_disks 1778{ 1779 sfi=/tmp/swaplist.$$ 1780 dmpi=/tmp/dumpdev.$$ 1781 max_finddisksnum=${MAX_FINDDISKSNUM:-6} 1782 1783 swap -l > $sfi 1784 dumpadm > $dmpi 2>/dev/null 1785 1786# write an awk script that can process the output of format 1787# to produce a list of disks we know about. Note that we have 1788# to escape "$2" so that the shell doesn't interpret it while 1789# we're creating the awk script. 1790# ------------------- 1791 cat > /tmp/find_disks.awk <<EOF 1792#!/bin/nawk -f 1793 BEGIN { FS="."; } 1794 1795 /^Specify disk/{ 1796 searchdisks=0; 1797 } 1798 1799 { 1800 if (searchdisks && \$2 !~ "^$"){ 1801 split(\$2,arr," "); 1802 print arr[1]; 1803 } 1804 } 1805 1806 /^AVAILABLE DISK SELECTIONS:/{ 1807 searchdisks=1; 1808 } 1809EOF 1810#--------------------- 1811 1812 chmod 755 /tmp/find_disks.awk 1813 disks=${@:-$(echo "" | format -e 2>/dev/null | /tmp/find_disks.awk)} 1814 rm /tmp/find_disks.awk 1815 1816 unused="" 1817 for disk in $disks; do 1818 # Check for mounted 1819 grep "${disk}[sp]" /etc/mnttab >/dev/null 1820 (($? == 0)) && continue 1821 # Check for swap 1822 grep "${disk}[sp]" $sfi >/dev/null 1823 (($? == 0)) && continue 1824 # check for dump device 1825 grep "${disk}[sp]" $dmpi >/dev/null 1826 (($? == 0)) && continue 1827 # check to see if this disk hasn't been explicitly excluded 1828 # by a user-set environment variable 1829 echo "${ZFS_HOST_DEVICES_IGNORE}" | grep "${disk}" > /dev/null 1830 (($? == 0)) && continue 1831 unused_candidates="$unused_candidates $disk" 1832 done 1833 rm $sfi 1834 rm $dmpi 1835 1836# now just check to see if those disks do actually exist 1837# by looking for a device pointing to the first slice in 1838# each case. limit the number to max_finddisksnum 1839 count=0 1840 for disk in $unused_candidates; do 1841 if [ -b /dev/dsk/${disk}s0 ]; then 1842 if [ $count -lt $max_finddisksnum ]; then 1843 unused="$unused $disk" 1844 # do not impose limit if $@ is provided 1845 [[ -z $@ ]] && ((count = count + 1)) 1846 fi 1847 fi 1848 done 1849 1850# finally, return our disk list 1851 echo $unused 1852} 1853 1854# 1855# Add specified user to specified group 1856# 1857# $1 group name 1858# $2 user name 1859# $3 base of the homedir (optional) 1860# 1861function add_user #<group_name> <user_name> <basedir> 1862{ 1863 typeset gname=$1 1864 typeset uname=$2 1865 typeset basedir=${3:-"/var/tmp"} 1866 1867 if ((${#gname} == 0 || ${#uname} == 0)); then 1868 log_fail "group name or user name are not defined." 1869 fi 1870 1871 log_must useradd -g $gname -d $basedir/$uname -m $uname 1872 1873 return 0 1874} 1875 1876# 1877# Delete the specified user. 1878# 1879# $1 login name 1880# $2 base of the homedir (optional) 1881# 1882function del_user #<logname> <basedir> 1883{ 1884 typeset user=$1 1885 typeset basedir=${2:-"/var/tmp"} 1886 1887 if ((${#user} == 0)); then 1888 log_fail "login name is necessary." 1889 fi 1890 1891 if id $user > /dev/null 2>&1; then 1892 log_must userdel $user 1893 fi 1894 1895 [[ -d $basedir/$user ]] && rm -fr $basedir/$user 1896 1897 return 0 1898} 1899 1900# 1901# Select valid gid and create specified group. 1902# 1903# $1 group name 1904# 1905function add_group #<group_name> 1906{ 1907 typeset group=$1 1908 1909 if ((${#group} == 0)); then 1910 log_fail "group name is necessary." 1911 fi 1912 1913 # Assign 100 as the base gid 1914 typeset -i gid=100 1915 while true; do 1916 groupadd -g $gid $group > /dev/null 2>&1 1917 typeset -i ret=$? 1918 case $ret in 1919 0) return 0 ;; 1920 # The gid is not unique 1921 4) ((gid += 1)) ;; 1922 *) return 1 ;; 1923 esac 1924 done 1925} 1926 1927# 1928# Delete the specified group. 1929# 1930# $1 group name 1931# 1932function del_group #<group_name> 1933{ 1934 typeset grp=$1 1935 if ((${#grp} == 0)); then 1936 log_fail "group name is necessary." 1937 fi 1938 1939 groupmod -n $grp $grp > /dev/null 2>&1 1940 typeset -i ret=$? 1941 case $ret in 1942 # Group does not exist. 1943 6) return 0 ;; 1944 # Name already exists as a group name 1945 9) log_must groupdel $grp ;; 1946 *) return 1 ;; 1947 esac 1948 1949 return 0 1950} 1951 1952# 1953# This function will return true if it's safe to destroy the pool passed 1954# as argument 1. It checks for pools based on zvols and files, and also 1955# files contained in a pool that may have a different mountpoint. 1956# 1957function safe_to_destroy_pool { # $1 the pool name 1958 1959 typeset pool="" 1960 typeset DONT_DESTROY="" 1961 1962 # We check that by deleting the $1 pool, we're not 1963 # going to pull the rug out from other pools. Do this 1964 # by looking at all other pools, ensuring that they 1965 # aren't built from files or zvols contained in this pool. 1966 1967 for pool in $(zpool list -H -o name) 1968 do 1969 ALTMOUNTPOOL="" 1970 1971 # this is a list of the top-level directories in each of the 1972 # files that make up the path to the files the pool is based on 1973 FILEPOOL=$(zpool status -v $pool | grep /$1/ | \ 1974 awk '{print $1}') 1975 1976 # this is a list of the zvols that make up the pool 1977 ZVOLPOOL=$(zpool status -v $pool | grep "/dev/zvol/dsk/$1$" \ 1978 | awk '{print $1}') 1979 1980 # also want to determine if it's a file-based pool using an 1981 # alternate mountpoint... 1982 POOL_FILE_DIRS=$(zpool status -v $pool | \ 1983 grep / | awk '{print $1}' | \ 1984 awk -F/ '{print $2}' | grep -v "dev") 1985 1986 for pooldir in $POOL_FILE_DIRS 1987 do 1988 OUTPUT=$(zfs list -H -r -o mountpoint $1 | \ 1989 grep "${pooldir}$" | awk '{print $1}') 1990 1991 ALTMOUNTPOOL="${ALTMOUNTPOOL}${OUTPUT}" 1992 done 1993 1994 1995 if [ ! -z "$ZVOLPOOL" ] 1996 then 1997 DONT_DESTROY="true" 1998 log_note "Pool $pool is built from $ZVOLPOOL on $1" 1999 fi 2000 2001 if [ ! -z "$FILEPOOL" ] 2002 then 2003 DONT_DESTROY="true" 2004 log_note "Pool $pool is built from $FILEPOOL on $1" 2005 fi 2006 2007 if [ ! -z "$ALTMOUNTPOOL" ] 2008 then 2009 DONT_DESTROY="true" 2010 log_note "Pool $pool is built from $ALTMOUNTPOOL on $1" 2011 fi 2012 done 2013 2014 if [ -z "${DONT_DESTROY}" ] 2015 then 2016 return 0 2017 else 2018 log_note "Warning: it is not safe to destroy $1!" 2019 return 1 2020 fi 2021} 2022 2023# 2024# Get the available ZFS compression options 2025# $1 option type zfs_set|zfs_compress 2026# 2027function get_compress_opts 2028{ 2029 typeset COMPRESS_OPTS 2030 typeset GZIP_OPTS="gzip gzip-1 gzip-2 gzip-3 gzip-4 gzip-5 \ 2031 gzip-6 gzip-7 gzip-8 gzip-9" 2032 2033 if [[ $1 == "zfs_compress" ]] ; then 2034 COMPRESS_OPTS="on lzjb" 2035 elif [[ $1 == "zfs_set" ]] ; then 2036 COMPRESS_OPTS="on off lzjb" 2037 fi 2038 typeset valid_opts="$COMPRESS_OPTS" 2039 zfs get 2>&1 | grep gzip >/dev/null 2>&1 2040 if [[ $? -eq 0 ]]; then 2041 valid_opts="$valid_opts $GZIP_OPTS" 2042 fi 2043 echo "$valid_opts" 2044} 2045 2046# 2047# Verify zfs operation with -p option work as expected 2048# $1 operation, value could be create, clone or rename 2049# $2 dataset type, value could be fs or vol 2050# $3 dataset name 2051# $4 new dataset name 2052# 2053function verify_opt_p_ops 2054{ 2055 typeset ops=$1 2056 typeset datatype=$2 2057 typeset dataset=$3 2058 typeset newdataset=$4 2059 2060 if [[ $datatype != "fs" && $datatype != "vol" ]]; then 2061 log_fail "$datatype is not supported." 2062 fi 2063 2064 # check parameters accordingly 2065 case $ops in 2066 create) 2067 newdataset=$dataset 2068 dataset="" 2069 if [[ $datatype == "vol" ]]; then 2070 ops="create -V $VOLSIZE" 2071 fi 2072 ;; 2073 clone) 2074 if [[ -z $newdataset ]]; then 2075 log_fail "newdataset should not be empty" \ 2076 "when ops is $ops." 2077 fi 2078 log_must datasetexists $dataset 2079 log_must snapexists $dataset 2080 ;; 2081 rename) 2082 if [[ -z $newdataset ]]; then 2083 log_fail "newdataset should not be empty" \ 2084 "when ops is $ops." 2085 fi 2086 log_must datasetexists $dataset 2087 log_mustnot snapexists $dataset 2088 ;; 2089 *) 2090 log_fail "$ops is not supported." 2091 ;; 2092 esac 2093 2094 # make sure the upper level filesystem does not exist 2095 if datasetexists ${newdataset%/*} ; then 2096 log_must zfs destroy -rRf ${newdataset%/*} 2097 fi 2098 2099 # without -p option, operation will fail 2100 log_mustnot zfs $ops $dataset $newdataset 2101 log_mustnot datasetexists $newdataset ${newdataset%/*} 2102 2103 # with -p option, operation should succeed 2104 log_must zfs $ops -p $dataset $newdataset 2105 if ! datasetexists $newdataset ; then 2106 log_fail "-p option does not work for $ops" 2107 fi 2108 2109 # when $ops is create or clone, redo the operation still return zero 2110 if [[ $ops != "rename" ]]; then 2111 log_must zfs $ops -p $dataset $newdataset 2112 fi 2113 2114 return 0 2115} 2116 2117# 2118# Get configuration of pool 2119# $1 pool name 2120# $2 config name 2121# 2122function get_config 2123{ 2124 typeset pool=$1 2125 typeset config=$2 2126 typeset alt_root 2127 2128 if ! poolexists "$pool" ; then 2129 return 1 2130 fi 2131 alt_root=$(zpool list -H $pool | awk '{print $NF}') 2132 if [[ $alt_root == "-" ]]; then 2133 value=$(zdb -C $pool | grep "$config:" | awk -F: \ 2134 '{print $2}') 2135 else 2136 value=$(zdb -e $pool | grep "$config:" | awk -F: \ 2137 '{print $2}') 2138 fi 2139 if [[ -n $value ]] ; then 2140 value=${value#'} 2141 value=${value%'} 2142 fi 2143 echo $value 2144 2145 return 0 2146} 2147 2148# 2149# Privated function. Random select one of items from arguments. 2150# 2151# $1 count 2152# $2-n string 2153# 2154function _random_get 2155{ 2156 typeset cnt=$1 2157 shift 2158 2159 typeset str="$@" 2160 typeset -i ind 2161 ((ind = RANDOM % cnt + 1)) 2162 2163 typeset ret=$(echo "$str" | cut -f $ind -d ' ') 2164 echo $ret 2165} 2166 2167# 2168# Random select one of item from arguments which include NONE string 2169# 2170function random_get_with_non 2171{ 2172 typeset -i cnt=$# 2173 ((cnt =+ 1)) 2174 2175 _random_get "$cnt" "$@" 2176} 2177 2178# 2179# Random select one of item from arguments which doesn't include NONE string 2180# 2181function random_get 2182{ 2183 _random_get "$#" "$@" 2184} 2185 2186# 2187# Detect if the current system support slog 2188# 2189function verify_slog_support 2190{ 2191 typeset dir=/tmp/disk.$$ 2192 typeset pool=foo.$$ 2193 typeset vdev=$dir/a 2194 typeset sdev=$dir/b 2195 2196 mkdir -p $dir 2197 mkfile $MINVDEVSIZE $vdev $sdev 2198 2199 typeset -i ret=0 2200 if ! zpool create -n $pool $vdev log $sdev > /dev/null 2>&1; then 2201 ret=1 2202 fi 2203 rm -r $dir 2204 2205 return $ret 2206} 2207 2208# 2209# The function will generate a dataset name with specific length 2210# $1, the length of the name 2211# $2, the base string to construct the name 2212# 2213function gen_dataset_name 2214{ 2215 typeset -i len=$1 2216 typeset basestr="$2" 2217 typeset -i baselen=${#basestr} 2218 typeset -i iter=0 2219 typeset l_name="" 2220 2221 if ((len % baselen == 0)); then 2222 ((iter = len / baselen)) 2223 else 2224 ((iter = len / baselen + 1)) 2225 fi 2226 while ((iter > 0)); do 2227 l_name="${l_name}$basestr" 2228 2229 ((iter -= 1)) 2230 done 2231 2232 echo $l_name 2233} 2234 2235# 2236# Get cksum tuple of dataset 2237# $1 dataset name 2238# 2239# sample zdb output: 2240# Dataset data/test [ZPL], ID 355, cr_txg 2413856, 31.0K, 7 objects, rootbp 2241# DVA[0]=<0:803046400:200> DVA[1]=<0:81199000:200> [L0 DMU objset] fletcher4 2242# lzjb LE contiguous unique double size=800L/200P birth=2413856L/2413856P 2243# fill=7 cksum=11ce125712:643a9c18ee2:125e25238fca0:254a3f74b59744 2244function datasetcksum 2245{ 2246 typeset cksum 2247 sync 2248 cksum=$(zdb -vvv $1 | grep "^Dataset $1 \[" | grep "cksum" \ 2249 | awk -F= '{print $7}') 2250 echo $cksum 2251} 2252 2253# 2254# Get cksum of file 2255# #1 file path 2256# 2257function checksum 2258{ 2259 typeset cksum 2260 cksum=$(cksum $1 | awk '{print $1}') 2261 echo $cksum 2262} 2263 2264# 2265# Get the given disk/slice state from the specific field of the pool 2266# 2267function get_device_state #pool disk field("", "spares","logs") 2268{ 2269 typeset pool=$1 2270 typeset disk=${2#/dev/dsk/} 2271 typeset field=${3:-$pool} 2272 2273 state=$(zpool status -v "$pool" 2>/dev/null | \ 2274 nawk -v device=$disk -v pool=$pool -v field=$field \ 2275 'BEGIN {startconfig=0; startfield=0; } 2276 /config:/ {startconfig=1} 2277 (startconfig==1) && ($1==field) {startfield=1; next;} 2278 (startfield==1) && ($1==device) {print $2; exit;} 2279 (startfield==1) && 2280 ($1==field || $1 ~ "^spares$" || $1 ~ "^logs$") {startfield=0}') 2281 echo $state 2282} 2283 2284 2285# 2286# print the given directory filesystem type 2287# 2288# $1 directory name 2289# 2290function get_fstype 2291{ 2292 typeset dir=$1 2293 2294 if [[ -z $dir ]]; then 2295 log_fail "Usage: get_fstype <directory>" 2296 fi 2297 2298 # 2299 # $ df -n / 2300 # / : ufs 2301 # 2302 df -n $dir | awk '{print $3}' 2303} 2304 2305# 2306# Given a disk, label it to VTOC regardless what label was on the disk 2307# $1 disk 2308# 2309function labelvtoc 2310{ 2311 typeset disk=$1 2312 if [[ -z $disk ]]; then 2313 log_fail "The disk name is unspecified." 2314 fi 2315 typeset label_file=/var/tmp/labelvtoc.$$ 2316 typeset arch=$(uname -p) 2317 2318 if [[ $arch == "i386" ]]; then 2319 echo "label" > $label_file 2320 echo "0" >> $label_file 2321 echo "" >> $label_file 2322 echo "q" >> $label_file 2323 echo "q" >> $label_file 2324 2325 fdisk -B $disk >/dev/null 2>&1 2326 # wait a while for fdisk finishes 2327 sleep 60 2328 elif [[ $arch == "sparc" ]]; then 2329 echo "label" > $label_file 2330 echo "0" >> $label_file 2331 echo "" >> $label_file 2332 echo "" >> $label_file 2333 echo "" >> $label_file 2334 echo "q" >> $label_file 2335 else 2336 log_fail "unknown arch type" 2337 fi 2338 2339 format -e -s -d $disk -f $label_file 2340 typeset -i ret_val=$? 2341 rm -f $label_file 2342 # 2343 # wait the format to finish 2344 # 2345 sleep 60 2346 if ((ret_val != 0)); then 2347 log_fail "unable to label $disk as VTOC." 2348 fi 2349 2350 return 0 2351} 2352 2353# 2354# check if the system was installed as zfsroot or not 2355# return: 0 ture, otherwise false 2356# 2357function is_zfsroot 2358{ 2359 df -n / | grep zfs > /dev/null 2>&1 2360 return $? 2361} 2362 2363# 2364# get the root filesystem name if it's zfsroot system. 2365# 2366# return: root filesystem name 2367function get_rootfs 2368{ 2369 typeset rootfs="" 2370 rootfs=$(awk '{if ($2 == "/" && $3 == "zfs") print $1}' \ 2371 /etc/mnttab) 2372 if [[ -z "$rootfs" ]]; then 2373 log_fail "Can not get rootfs" 2374 fi 2375 zfs list $rootfs > /dev/null 2>&1 2376 if (($? == 0)); then 2377 echo $rootfs 2378 else 2379 log_fail "This is not a zfsroot system." 2380 fi 2381} 2382 2383# 2384# get the rootfs's pool name 2385# return: 2386# rootpool name 2387# 2388function get_rootpool 2389{ 2390 typeset rootfs="" 2391 typeset rootpool="" 2392 rootfs=$(awk '{if ($2 == "/" && $3 =="zfs") print $1}' \ 2393 /etc/mnttab) 2394 if [[ -z "$rootfs" ]]; then 2395 log_fail "Can not get rootpool" 2396 fi 2397 zfs list $rootfs > /dev/null 2>&1 2398 if (($? == 0)); then 2399 rootpool=`echo $rootfs | awk -F\/ '{print $1}'` 2400 echo $rootpool 2401 else 2402 log_fail "This is not a zfsroot system." 2403 fi 2404} 2405 2406# 2407# Check if the given device is physical device 2408# 2409function is_physical_device #device 2410{ 2411 typeset device=${1#/dev/dsk/} 2412 device=${device#/dev/rdsk/} 2413 2414 echo $device | egrep "^c[0-F]+([td][0-F]+)+$" > /dev/null 2>&1 2415 return $? 2416} 2417 2418# 2419# Get the directory path of given device 2420# 2421function get_device_dir #device 2422{ 2423 typeset device=$1 2424 2425 if ! $(is_physical_device $device) ; then 2426 if [[ $device != "/" ]]; then 2427 device=${device%/*} 2428 fi 2429 echo $device 2430 else 2431 echo "/dev/dsk" 2432 fi 2433} 2434 2435# 2436# Get the package name 2437# 2438function get_package_name 2439{ 2440 typeset dirpath=${1:-$STC_NAME} 2441 2442 echo "SUNWstc-${dirpath}" | /usr/bin/sed -e "s/\//-/g" 2443} 2444 2445# 2446# Get the word numbers from a string separated by white space 2447# 2448function get_word_count 2449{ 2450 echo $1 | wc -w 2451} 2452 2453# 2454# To verify if the require numbers of disks is given 2455# 2456function verify_disk_count 2457{ 2458 typeset -i min=${2:-1} 2459 2460 typeset -i count=$(get_word_count "$1") 2461 2462 if ((count < min)); then 2463 log_untested "A minimum of $min disks is required to run." \ 2464 " You specified $count disk(s)" 2465 fi 2466} 2467 2468function ds_is_volume 2469{ 2470 typeset type=$(get_prop type $1) 2471 [[ $type = "volume" ]] && return 0 2472 return 1 2473} 2474 2475function ds_is_filesystem 2476{ 2477 typeset type=$(get_prop type $1) 2478 [[ $type = "filesystem" ]] && return 0 2479 return 1 2480} 2481 2482function ds_is_snapshot 2483{ 2484 typeset type=$(get_prop type $1) 2485 [[ $type = "snapshot" ]] && return 0 2486 return 1 2487} 2488 2489# 2490# Check if Trusted Extensions are installed and enabled 2491# 2492function is_te_enabled 2493{ 2494 svcs -H -o state labeld 2>/dev/null | grep "enabled" 2495 if (($? != 0)); then 2496 return 1 2497 else 2498 return 0 2499 fi 2500} 2501 2502# Utility function to determine if a system has multiple cpus. 2503function is_mp 2504{ 2505 (($(psrinfo | wc -l) > 1)) 2506} 2507 2508function get_cpu_freq 2509{ 2510 psrinfo -v 0 | awk '/processor operates at/ {print $6}' 2511} 2512 2513# Run the given command as the user provided. 2514function user_run 2515{ 2516 typeset user=$1 2517 shift 2518 2519 eval su \$user -c \"$@\" > /tmp/out 2>/tmp/err 2520 return $? 2521} 2522 2523# 2524# Check if the pool contains the specified vdevs 2525# 2526# $1 pool 2527# $2..n <vdev> ... 2528# 2529# Return 0 if the vdevs are contained in the pool, 1 if any of the specified 2530# vdevs is not in the pool, and 2 if pool name is missing. 2531# 2532function vdevs_in_pool 2533{ 2534 typeset pool=$1 2535 typeset vdev 2536 2537 if [[ -z $pool ]]; then 2538 log_note "Missing pool name." 2539 return 2 2540 fi 2541 2542 shift 2543 2544 typeset tmpfile=$(mktemp) 2545 zpool list -Hv "$pool" >$tmpfile 2546 for vdev in $@; do 2547 grep -w ${vdev##*/} $tmpfile >/dev/null 2>&1 2548 [[ $? -ne 0 ]] && return 1 2549 done 2550 2551 rm -f $tmpfile 2552 2553 return 0; 2554} 2555 2556function get_max 2557{ 2558 typeset -l i max=$1 2559 shift 2560 2561 for i in "$@"; do 2562 max=$(echo $((max > i ? max : i))) 2563 done 2564 2565 echo $max 2566} 2567 2568function get_min 2569{ 2570 typeset -l i min=$1 2571 shift 2572 2573 for i in "$@"; do 2574 min=$(echo $((min < i ? min : i))) 2575 done 2576 2577 echo $min 2578} 2579 2580# 2581# Generate a random number between 1 and the argument. 2582# 2583function random 2584{ 2585 typeset max=$1 2586 echo $(( ($RANDOM % $max) + 1 )) 2587} 2588 2589# Write data that can be compressed into a directory 2590function write_compressible 2591{ 2592 typeset dir=$1 2593 typeset megs=$2 2594 typeset nfiles=${3:-1} 2595 typeset bs=${4:-1024k} 2596 typeset fname=${5:-file} 2597 2598 [[ -d $dir ]] || log_fail "No directory: $dir" 2599 2600 log_must eval "fio \ 2601 --name=job \ 2602 --fallocate=0 \ 2603 --minimal \ 2604 --randrepeat=0 \ 2605 --buffer_compress_percentage=66 \ 2606 --buffer_compress_chunk=4096 \ 2607 --directory=$dir \ 2608 --numjobs=$nfiles \ 2609 --rw=write \ 2610 --bs=$bs \ 2611 --filesize=$megs \ 2612 --filename_format='$fname.\$jobnum' >/dev/null" 2613} 2614 2615function get_objnum 2616{ 2617 typeset pathname=$1 2618 typeset objnum 2619 2620 [[ -e $pathname ]] || log_fail "No such file or directory: $pathname" 2621 objnum=$(stat -c %i $pathname) 2622 echo $objnum 2623} 2624 2625# 2626# Prints the current time in seconds since UNIX Epoch. 2627# 2628function current_epoch 2629{ 2630 printf '%(%s)T' 2631} 2632 2633# 2634# Get decimal value of global uint32_t variable using mdb. 2635# 2636function mdb_get_uint32 2637{ 2638 typeset variable=$1 2639 typeset value 2640 2641 value=$(mdb -k -e "$variable/X | ::eval .=U") 2642 if [[ $? -ne 0 ]]; then 2643 log_fail "Failed to get value of '$variable' from mdb." 2644 return 1 2645 fi 2646 2647 echo $value 2648 return 0 2649} 2650 2651# 2652# Set global uint32_t variable to a decimal value using mdb. 2653# 2654function mdb_set_uint32 2655{ 2656 typeset variable=$1 2657 typeset value=$2 2658 2659 mdb -kw -e "$variable/W 0t$value" > /dev/null 2660 if [[ $? -ne 0 ]]; then 2661 echo "Failed to set '$variable' to '$value' in mdb." 2662 return 1 2663 fi 2664 2665 return 0 2666} 2667 2668# 2669# Set global scalar integer variable to a hex value using mdb. 2670# Note: Target should have CTF data loaded. 2671# 2672function mdb_ctf_set_int 2673{ 2674 typeset variable=$1 2675 typeset value=$2 2676 2677 mdb -kw -e "$variable/z $value" > /dev/null 2678 if [[ $? -ne 0 ]]; then 2679 echo "Failed to set '$variable' to '$value' in mdb." 2680 return 1 2681 fi 2682 2683 return 0 2684} 2685