xref: /illumos-gate/usr/src/man/man9s/mac_callbacks.9s (revision 3580e26c24814e4d892b1eae539b8761388f79f1)
1.\"
2.\" This file and its contents are supplied under the terms of the
3.\" Common Development and Distribution License ("CDDL"), version 1.0.
4.\" You may only use this file in accordance with the terms of version
5.\" 1.0 of the CDDL.
6.\"
7.\" A full copy of the text of the CDDL should have accompanied this
8.\" source.  A copy of the CDDL is also available via the Internet at
9.\" http://www.illumos.org/license/CDDL.
10.\"
11.\"
12.\" Copyright (c) 2017, Joyent, Inc.
13.\" Copyright 2022 Oxide Computer Company
14.\"
15.Dd July 2, 2022
16.Dt MAC_CALLBACKS 9S
17.Os
18.Sh NAME
19.Nm mac_callbacks ,
20.Nm mac_callbacks_t
21.Nd networking device driver entry points structure
22.Sh SYNOPSIS
23.In sys/mac_provider.h
24.Sh INTERFACE LEVEL
25illumos DDI specific
26.Sh DESCRIPTION
27The
28.Sy mac_callbacks
29structure is used by GLDv3 networking device drivers implementing and
30using the
31.Xr mac 9E
32framework and interfaces.
33.Pp
34The structure is normally allocated statically by drivers as a single
35global entry.
36A pointer to it is passed as the
37.Fa m_callbacks
38member of the
39.Vt mac_register_t
40structure.
41.Sh TYPES
42The following types define the function pointers in use in the
43.Vt mac_register_t .
44.Bd -literal -offset indent
45typedef int		(*mac_getstat_t)(void *, uint_t, uint64_t *);
46typedef	int		(*mac_start_t)(void *);
47typedef void		(*mac_stop_t)(void *);
48typedef int		(*mac_setpromisc_t)(void *, boolean_t);
49typedef int		(*mac_multicst_t)(void *, boolean_t, const uint8_t *);
50typedef int		(*mac_unicst_t)(void *, const uint8_t *);
51typedef void		(*mac_ioctl_t)(void *, queue_t *, mblk_t *);
52typedef void		(*mac_resources_t)(void *);
53typedef mblk_t		*(*mac_tx_t)(void *, mblk_t *);
54typedef	boolean_t	(*mac_getcapab_t)(void *, mac_capab_t, void *);
55typedef	int		(*mac_open_t)(void *);
56typedef void		(*mac_close_t)(void *);
57typedef	int		(*mac_set_prop_t)(void *, const char *, mac_prop_id_t,
58			    uint_t, const void *);
59typedef	int		(*mac_get_prop_t)(void *, const char *, mac_prop_id_t,
60			    uint_t, void *);
61typedef void		(*mac_prop_info_t)(void *, const char *, mac_prop_id_t,
62			    mac_prop_info_handle_t);
63.Ed
64.Sh STRUCTURE MEMBERS
65.Bd -literal -offset indent
66uint_t		mc_callbacks;	/* Denotes which callbacks are set */
67mac_getstat_t	mc_getstat;	/* Get the value of a statistic */
68mac_start_t	mc_start;	/* Start the device */
69mac_stop_t	mc_stop;	/* Stop the device */
70mac_setpromisc_t mc_setpromisc;	/* Enable or disable promiscuous mode */
71mac_multicst_t	mc_multicst;	/* Enable or disable a multicast addr */
72mac_unicst_t	mc_unicst;	/* Set the unicast MAC address */
73mac_tx_t	mc_tx;		/* Transmit a packet */
74void		*mc_reserved;	/* Reserved, do not use */
75mac_ioctl_t	mc_ioctl;	/* Process an unknown ioctl */
76mac_getcapab_t	mc_getcapab;	/* Get capability information */
77mac_open_t	mc_open;	/* Open the device */
78mac_close_t	mc_close;	/* Close the device */
79mac_set_prop_t	mc_setprop;	/* Set a device property */
80mac_get_prop_t	mc_getprop;	/* Get a device property */
81mac_prop_info_t	mc_propinfo;	/* Get property information */
82.Ed
83.Pp
84The
85.Fa mc_callbacks
86member is used to denote which of a series of optional callbacks are
87present.
88This method allows additional members to be added to the
89.Vt mac_callbacks_t
90structure while maintaining ABI compatibility with existing modules.
91If a member is not mentioned below, then it is a part of the base version
92of the structure and device drivers do not need to set anything to
93indicate that it is present.
94The
95.Fa mc_callbacks
96member should be set to the bitwise inclusive OR of the following
97pre-processor values:
98.Bl -tag -width Dv -offset indent
99.It Dv MC_IOCTL
100Indicates that the
101.Fa mc_ioctl
102structure member has been set.
103.It Dv MC_GETCAPAB
104Indicates that the
105.Fa mc_getcapab
106structure member has been set.
107.It Dv MC_OPEN
108Indicates that the
109.Fa mc_open
110structure member has been set.
111.It Dv MC_CLOSE
112Indicates that the
113.Fa mc_close
114structure member has been set.
115.It Dv MC_SETPROP
116Indicates that the
117.Fa mc_setprop
118structure member has been set.
119.It Dv MC_GETPROP
120Indicates that the
121.Fa mc_getprop
122structure member has been set.
123.It Dv MC_PROPINFO
124Indicates that the
125.Fa mc_propinfo
126structure member has been set.
127.It Dv MC_PROPERTIES
128Indicates that the
129.Fa mc_getprop ,
130.Fa mc_propinfo ,
131and
132.Fa mc_setprop
133structure members have been set.
134.El
135.Pp
136The
137.Fa mc_getstat
138function defines an entry point used to receive statistics about the
139device.
140A list of statistics that it is required to support is available in
141.Xr mac 9E .
142For more information on the requirements of the function, see
143.Xr mc_getstat 9E .
144.Pp
145The
146.Fa mc_start
147member defines an entry point that is used to start the device.
148For more information on the requirements of the function, see
149.Xr mc_start 9E .
150.Pp
151The
152.Fa mc_stop
153member defines an entry point that is used to stop the device.
154It is the opposite of the
155.Fa mc_start
156member.
157For more information on the requirements of the function, see
158.Xr mc_stop 9E .
159.Pp
160The
161.Fa mc_setpromisc
162member is used to enable and disable promiscuous mode on the device.
163For more information on the requirements of the function, see
164.Xr mc_setpromisc 9E .
165.Pp
166The
167.Fa mc_multicst
168member is used to enable or disable multicast addresses in the device's
169filters.
170For more information on the requirements of the function, see
171.Xr mc_multicst 9E .
172.Pp
173The
174.Fa mc_unicst
175member is used to set the primary unicast MAC address of the device.
176For more information on the requirements of the function, see
177.Xr mc_unicst 9E .
178.Pp
179The
180.Fa mc_tx
181member is used to transmit a single message on the wire.
182For more information on the requirements of the function, see
183.Xr mc_tx 9E .
184.Pp
185The
186.Fa mc_ioctl
187member is used to process device specific ioctls.
188The MAC framework does not define any ioctls that devices should handle;
189however, there may be private ioctls for this device.
190This entry point is optional.
191For it to be considered, the
192.Dv MC_IOCTL
193value must be present in the
194.Fa mc_callbacks
195member.
196For more information on the requirements of the function, see
197.Xr mc_ioctl 9E .
198.Pp
199The
200.Fa mc_getcapab
201member is used to determine device capabilities.
202Each capability has its own data and semantics associated with it.
203A list of capabilities is provided in
204.Xr mac 9E .
205This entry point is optional.
206For it to be used, the
207.Dv MC_GETCAPAB
208value must be present in the
209.Fa mc_callbacks
210member.
211For more information on the requirements of the function, see
212.Xr mc_getcapab 9E .
213.Pp
214The
215.Fa mc_open
216member is used to provide specific actions to take when the device is
217opened.
218Note that most device drivers will not have a need to implement this.
219It is not required for this function to be implemented for this device to be
220used with
221.Xr dlpi 4P .
222This entry point is optional.
223For it to be used, the
224.Dv MC_OPEN
225value must be present in the
226.Fa mc_callbacks
227member.
228For more information on the requirements of the function, see
229.Xr mc_open 9E .
230.Pp
231The
232.Fa mc_close
233member is used to provide specific actions to take when the device is
234closed.
235Note that most device drivers will not have a need to implement this.
236It is not required for this function to be implemented for this device to be
237used with
238.Xr dlpi 4P .
239This entry point is optional.
240For it to be used, the
241.Dv MC_CLOSE
242value must be present in the
243.Fa mc_callbacks
244member.
245For more information on the requirements of the function, see
246.Xr mc_close 9E .
247.Pp
248The
249.Fa mc_getprop
250member is used to get the current value of a property from the device.
251A list of properties, their sizes, and their interpretation is available in
252.Xr mac 9E .
253This entry point is optional.
254For it to be used, the
255.Dv MC_GETPROP
256value must be present in the
257.Fa mc_callbacks
258member.
259For more information on the requirements of the function, see
260.Xr mc_getprop 9E .
261.Pp
262The
263.Fa mc_setprop
264member is used to set the value of a device property.
265A list of properties, their sizes, and their interpretation is available in
266.Xr mac 9E .
267This entry point is optional.
268For it to be used, the
269.Dv MC_SETPROP
270value must be present in the
271.Fa mc_callbacks
272member.
273For more information on the requirements of the function, see
274.Xr mc_setprop 9E .
275.Pp
276The
277.Fa mc_propinfo
278member is used to obtain metadata about a property such as its default
279value, whether or not it is writable, and more.
280A list of properties, their sizes, and their interpretation is available in
281.Xr mac 9E .
282This entry point is optional.
283For it to be used, the
284.Dv MC_PROPINFO
285value must be present in the
286.Fa mc_callbacks
287member.
288For more information on the requirements of the function, see
289.Xr mc_propinfo 9E .
290.Ss Required Members
291Many members in the structure are optional; however, the following
292members must be set or a call to
293.Xr mac_register 9F
294will fail.
295.Bl -bullet -offset indent
296.It
297.Fa mc_getstat
298.It
299.Fa mc_start
300.It
301.Fa mc_stop
302.It
303.Fa mc_setpromisc
304.It
305.Fa mc_multicst
306.It
307.Fa mc_tx
308.It
309.Fa mc_unicst
310.El
311.Pp
312Devices which implement the
313.Dv MAC_CAPAB_RINGS
314capability for receive rings must not implement the
315.Fa mc_unicst
316entry point.
317Devices which implement the
318.Dv MAC_CAPAB_RINGS
319capability for transmit rings must not implement the
320.Fa mc_tx
321entry points.
322For more information about the capability, please see
323.Xr mac_capab_rings 9E .
324.Pp
325Generally, a device that implements one of
326.Fa mc_getprop ,
327.Fa mc_setprop ,
328or
329.Fa mc_propinfo
330will want to implement all three endpoints to ensure that the property
331is fully integrated into user land utilities such as
332.Xr dladm 8 .
333.Sh SEE ALSO
334.Xr dlpi 4P ,
335.Xr dladm 8 ,
336.Xr mac 9E ,
337.Xr mac_capab_rings 9E ,
338.Xr mc_close 9E ,
339.Xr mc_getcapab 9E ,
340.Xr mc_getprop 9E ,
341.Xr mc_getstat 9E ,
342.Xr mc_ioctl 9E ,
343.Xr mc_multicst 9E ,
344.Xr mc_open 9E ,
345.Xr mc_propinfo 9E ,
346.Xr mc_setpromisc 9E ,
347.Xr mc_setprop 9E ,
348.Xr mc_start 9E ,
349.Xr mc_stop 9E ,
350.Xr mc_tx 9E ,
351.Xr mc_unicst 9E ,
352.Xr mac_register 9F ,
353.Xr mac_register 9S
354