xref: /illumos-gate/usr/src/man/man9f/bitset64.9f (revision dd72704bd9e794056c558153663c739e2012d721)
1.\"
2.\" This file and its contents are supplied under the terms of the
3.\" Common Development and Distribution License ("CDDL"), version 1.0.
4.\" You may only use this file in accordance with the terms of version
5.\" 1.0 of the CDDL.
6.\"
7.\" A full copy of the text of the CDDL should have accompanied this
8.\" source.  A copy of the CDDL is also available via the Internet at
9.\" http://www.illumos.org/license/CDDL.
10.\"
11.\"
12.\" Copyright 2022 Oxide Computer Company
13.\"
14.Dd April 12, 2022
15.Dt BITSET64 9F
16.Os
17.Sh NAME
18.Nm bitset8 ,
19.Nm bitset16 ,
20.Nm bitset32 ,
21.Nm bitset64
22.Nd set bitfield values in an integer
23.Sh SYNOPSIS
24.In sys/bitext.h
25.Ft uint8_t
26.Fo bitset8
27.Fa "uint8_t base"
28.Fa "uint_t high"
29.Fa "uint_t low"
30.Fa "uint8_t value"
31.Fc
32.Ft uint16_t
33.Fo bitset16
34.Fa "uint16_t base"
35.Fa "uint_t high"
36.Fa "uint_t low"
37.Fa "uint16_t value"
38.Fc
39.Ft uint32_t
40.Fo bitset32
41.Fa "uint32_t base"
42.Fa "uint_t high"
43.Fa "uint_t low"
44.Fa "uint32_t value"
45.Fc
46.Ft uint64_t
47.Fo bitset64
48.Fa "uint64_t base"
49.Fa "uint_t high"
50.Fa "uint_t low"
51.Fa "uint64_t value"
52.Fc
53.Sh INTERFACE LEVEL
54.Sy Volatile -
55This interface is still evolving in illumos.
56API and ABI stability is not guaranteed.
57.Sh PARAMETERS
58.Bl -tag -width Fa
59.It Fa base
60The starting integer that will have a value ORed into it.
61.It Fa high
62The high end, inclusive, of the bit range to insert
63.Fa value
64into
65.Fa base .
66.It Fa low
67The low end, inclusive, of the bit range to extract from
68.Fa value .
69.It Fa value
70A value to insert into
71.Fa base .
72.El
73.Sh DESCRIPTION
74The
75.Fn bitset8 ,
76.Fn bitset16 ,
77.Fn bitset32 ,
78and
79.Fn bitset64
80functions are used to logically bitwise-OR in the integer
81.Fa value
82into a specified bit position in
83.Fa base .
84Effectively, the function zeros out the bit range in
85.Fa base ,
86described by
87.Fa high
88and
89.Fa low
90and then performs a bitwise-OR of
91.Fa base
92which has been adjusted to start at
93.Fa low .
94.Pp
95The
96.Fa high
97and
98.Fa low
99arguments describe an inclusive bit range
100.Po
101.Pf [ Fa low ,
102.Fa high ]
103.Pc
104which describes where
105.Fa value
106should be inserted.
107It is illegal
108for
109.Fa low
110to be greater than
111.Fa high ,
112for
113.Fa low
114or
115.Fa high
116to exceed the integer's bit range
117.Po
118e.g. neither can be greater than 7 for
119.Fn bitset8
120.Pc ,
121and
122.Fa value
123must not exceed the described bit range.
124That is, if
125.Fa high
126was 2
127and
128.Fa low
129was 1,
130.Fa value
131could not be larger than a 2-bit value.
132.Pp
133Note, these functions do not modify either
134.Fa base
135or
136.Fa value .
137.Sh RETURN VALUES
138Upon successful completion, the
139.Fn bitset8 ,
140.Fn bitset16 ,
141.Fn bitset32 ,
142and
143.Fn bitset64
144functions all return a new value that has first cleared the specified
145bit range from
146.Fa base
147and then replaced it with
148.Fa value .
149.Sh EXAMPLES
150.Sy Example 1 -
151Using the
152.Fn bitset32
153function to build up a register value.
154.Pp
155A common use case for these functions is to help deal with registers
156that are defined as a series of bit values.
157The following example shows a register's bit definitions and then how
158they are used to construct a value to write.
159.Bd -literal
160/*
161 * This represents a token register definition. It is normally a
162 * uint32_t.
163 */
164#define	DF_IO_BASE_V2_SET_BASE(r, v)	bitx32(r, 24, 12, v)
165#define	DF_IO_BASE_V2_SET_IE(r, v)	bitset32(r, 5, 5, v)
166#define	DF_IO_BASE_V2_SET_WE(r, v)	bitset32(r, 1, 1, v)
167#define	DF_IO_BASE_V2_SET_RE(r, v)	bitset32(r, 0, 0, v)
168
169void
170setup_register(uint32_t base)
171{
172	uint32_t reg = 0;
173
174	/*
175	 * Set read enable, write enable, and the base. Then write the
176	 * hardware register.
177	 */
178	reg = DF_IO_BASE_V2_SET_RE(reg, 1);
179	reg = DF_IO_BASE_V2_SET_WE(reg, 1);
180	reg = DF_IO_BASE_V2_SET_BASE(reg, base);
181	write_register(XXX, reg);
182}
183.Ed
184.Sh SEE ALSO
185.Xr bitdel64 9F ,
186.Xr bitx64 9F
187