te
Copyright (c) 2006, Sun Microsystems, Inc. All Rights Reserved
The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
routeadm - IP forwarding and routing configuration

routeadm [-p [option]]

routeadm [-R root-dir] [-e option ...] [-d option...]
 [-r option...] [-s var=value]

routeadm [-l fmri]

routeadm [-m fmri key=value [key=value]...]

routeadm [-u]

The routeadm command is used to administer system-wide configuration for IP forwarding and routing. IP forwarding is the passing of IP packets from one network to another; IP routing is the use of a routing protocol to determine routes.

IP forwarding and routing functions are also represented as services within the service management facility (SMF), and can be administered by means of svcadm(8) also, using the following fault management resource identifiers (FMRIs):

svc:/network/ipv4-forwarding:default
svc:/network/ipv6-forwarding:default
svc:/network/routing/route:default
svc:/network/routing/ripng:default

See EXAMPLES for relevant examples.

In addition to enabling and disabling routing and forwarding, routeadm is used to interact with SMF-based routing daemon services. Routing daemon services are identified by the presence of a routeadm application property group, which routeadm uses in administering the given service. Routing daemon services can also specify properties relating to their operation in the routing application property group; these can be modified by means of routeadm -m. If an FMRI for a service without such a property group is specified, an error is issued and the operation is not carried out. If a routing daemon has not been converted to SMF, the ipv4[or 6]-routing-daemon, ipv4[or 6]-routing-daemon-args, and ipv4[or 6]-routing-stop-cmd variables can be used to specify the appropriate daemon for IPv4 or IPv6 routing. routeadm will then run that daemon using the svc:/network/routing/legacy-routing:ipv4[or 6] service as appropriate. This conversion process occurs when you issue an enable (-e), disable (-d) or an update (-u) command.

The first usage, in the SYNOPSIS above, reports the current configuration.

The following command-line options are supported: -p [option]

-R root-dir -e option... -d option... -l fmri -m fmri key=value -r option... -u -s key=value

Multiple -e, -d, and -r options can be specified on the command line. Changes made by -e, -d, and -r are persistent, but are not applied to the running system unless routeadm is called later with the -u option.

Use the following options as arguments to the -e, -d, and -r options (shown above as option...). ipv4-forwarding

ipv4-routing ipv6-forwarding ipv6-routing

The forwarding and routing settings are related but not mutually dependent. For example, a router typically forwards IP packets and uses a routing protocol, but nothing would prevent an administrator from configuring a router that forwards packets and does not use a routing protocol. In that case, the administrator would enable forwarding, disable routing, and populate the router's routing table with static routes.

The forwarding settings are global settings. Each interface also has an IFF_ROUTER forwarding flag that determines whether packets can be forwarded to or from a particular interface. That flag can be independently controlled by means of ifconfig(8)'s router option. When the global forwarding setting is changed (that is, -u is issued to change the value from enabled to disabled or vice-versa), all interface flags in the system are changed simultaneously to reflect the new global policy. Interfaces configured by means of DHCP automatically have their interface-specific IFF_ROUTER flag cleared.

When a new interface is plumbed by means of ifconfig, the value of the interface-specific forwarding flag is set according to the current global forwarding value. Thus, the forwarding value forms the "default" for all new interfaces.

Example 1 Enabling IPv4 Forwarding

IPv4 forwarding is disabled by default. The following command enables IPv4 forwarding:

example# routeadm -e ipv4-forwarding

Example 2 Apply Configured Settings to the Running System

In the previous example, a system setting was changed, but will not take effect until the next reboot unless a command such as the following is used:

example# routeadm -u

An alternative to the above two steps is to simply enable the equivalent SMF service:

example# svcadm enable svc:/network/ipv4-forwarding

...or, using the abbreviated FMRI:

example# svcadm enable ipv4-forwarding

Example 3 Making a Setting Revert to its Default

To make the setting changed in the first example revert to its default, enter the following:

example# routeadm -r ipv4-forwarding
example# routeadm -u

Example 4 Starting in.routed with the -q Flag

Setting the -q flag is represented in the SMF service by setting the quiet_mode property to true. The following sequence of commands starts in.routed with the -q flag:

example# routeadm -m route:default quiet_mode=true
example# routeadm -e ipv4-routing -u

See in.routed(8) for details of property names and how they relate to daemon behavior.

The following exit values are returned: 0

!=0 /etc/inet/routing.conf

See attributes(7) for descriptions of the following attributes:

ATTRIBUTE TYPE ATTRIBUTE VALUE

Interface Stability Stable

gateways (5), attributes (7), smf (7), ifconfig (8), in.routed (8), svcadm (8)