te
Copyright (c) 2003, Sun Microsystems, Inc. All Rights Reserved.
The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
datadm - maintain DAT static registry file

/usr/bin/datadm [-v] [-u] [-a service_provider.conf]
 [-r service_provider.conf]

The datadm utility maintains the DAT static registry file, dat.conf(5).

This administrative configuration program allows uDAPL service providers to add and remove themselves to the dat.conf file.

You can add or remove interface adapters that a service provider supports from a system after its installation. You can use datadm to update the dat.conf file to reflect the current state of the system. A new set of interface adapters for all the service providers currently installed is regenerated.

The following options are supported: -a service_provider.conf -r service_provider.conf -u -v Example 1 Enumerating a Device Entry

The following example enumerates a device entry in the service_provider.conf(5) file into interface adapters in the dat.conf(5) file.

Assume that SUNW has a service provider library that supports the device tavor. It has a service_provider.conf(5) file installed in the directory /usr/share/dat/SUNWudaplt.conf with a single entry as follows:

driver_name=tavor u1.2 nonthreadsafe default\e
 udapl_tavor.so.1 SUNW.1.0 ""

tavor is an Infiniband Host Channel Adapter with two ports. Both IB ports exist in a single IB partition, 0x8001. If an IP interface is plumbed to each port, there are two IPoIB device instances, ibd0 and ibd1:

# ls -l /dev/ibd*
/dev/ibd0 -> /devices/pci@1/pci15b3,5a44@0/ibport@1,8001,ipib:ibd0
/dev/ibd1 -> /devices/pci@1/pci15b3,5a44@0/ibport@2,8001,ipib:ibd1

Running the command, datadm -a /usr/share/dat/SUNWudaplt.conf appends two new entries (if they do not already exist) in the /etc/dat/dat.conf file:

ibd0 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
ibd1 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"

Example 2 Updating the dat.conf to Reflect the Current State of the System

A new IB partition, 0x8002 is added to the above example covering port 1 of the Host Channel Adapter. If a new IP interface is plumbed to port 1/partition 0x8002, there is a third IPoIB device instance: ibd2.

# ls -l /dev/ibd*
 /dev/ibd0 -> /devices/pci@1/pci15b3,5a44@0/ibport@1,8001,ipib:ibd0
 /dev/ibd1 -> /devices/pci@1/pci15b3,5a44@0/ibport@2,8001,ipib:ibd1
 /dev/ibd2 -> /devices/pci@1/pci15b3,5a44@0/ibport@1,8002,ipib:ibd2

Running datadm -u command, updates the /etc/dat/dat.conf file with a new entry added reflecting the current state of the system.

datadm -v shows that there are now three entries in the /etc/dat/dat.conf file:

ibd0 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
ibd1 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
ibd2 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"

/etc/dat/dat.conf See attributes(7) for descriptions of the following attributes:

ATTRIBUTE TYPE ATTRIBUTE VALUE

Interface Stability Evolving

libdat (3LIB), dat.conf (5), service_provider.conf (5), attributes (7)