Copyright (c) 2009 Sun Microsystems, Inc. All Rights Reserved.
The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
/etc/krb5/krb5.conf
The format of the krb5.conf consists of sections headings in square brackets. Each section can contain zero or more configuration variables (called relations), of the form:
relation= relation-value
or
relation-subsection = {
relation= relation-value
relation= relation-value
}
The krb5.conf file can contain any or all of the following sections: libdefaults
Contains default values used by the Kerberos V5 library.
Contains subsections for Kerberos V5 applications, where relation-subsection is the name of an application. Each subsection describes application-specific defaults.
Contains subsections for Kerberos realms, where relation-subsection is the name of a realm. Each subsection contains relations that define the properties for that particular realm.
Contains relations which map domain names and subdomains onto Kerberos realm names. This is used by programs to determine what realm a host should be in, given its fully qualified domain name.
Contains relations which determine how Kerberos programs are to perform logging.
Contains the authentication paths used with direct (nonhierarchical) cross-realm authentication. Entries in this section are used by the client to determine the intermediate realms which can be used in cross-realm authentication. It is also used by the end-service when checking the transited field for trusted intermediate realms.
Contains relations for Kerberos database plug-in-specific configuration information.
For a Key Distribution Center (KDC), can contain the location of the kdc.conf file.
Selects the dbmodule section entry to use to access the Kerberos database. If this parameter is not present the code uses the standard db2-based Kerberos database.
Specifies the default keytab name to be used by application servers such as telnetd and rlogind. The default is /etc/krb5/krb5.keytab.
Identifies the default Kerberos realm for the client. Set its value to your Kerberos realm.
Identifies the supported list of session key encryption types that should be returned by the KDC. The list can be delimited with commas or whitespace. The supported encryption types are des3-cbc-sha1-kd, des-cbc-crc, des-cbc-md5, arcfour-hmac-md5, arcfour-hmac-md5-exp, aes128-cts-hmac-sha1-96, and aes256-cts-hmac-sha1-96.
Identifies the supported list of session key encryption types that should be requested by the client. The format is the same as for default_tgs_enctypes. The supported encryption types are des3-cbc-sha1-kd, des-cbc-crc, des-cbc-md5, arcfour-hmac-md5, arcfour-hmac-md5-exp, aes128-cts-hmac-sha1-96, and aes256-cts-hmac-sha1-96.
Sets the maximum allowable amount of clock skew in seconds that the library tolerates before assuming that a Kerberos message is invalid. The default value is 300 seconds, or five minutes.
Sets the "forwardable" flag in all tickets. This allows users to transfer their credentials from one host to another without reauthenticating. This option can also be set in the [appdefaults] or [realms] section (see below) to limit its use in particular applications or just to a specific realm.
This relation controls the encryption types for session keys permitted by server applications that use Kerberos for authentication. In addition, it controls the encryption types of keys added to a keytab by means of the kadmin(8) ktadd command. The default is: aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-hmac-sha1-kd, arcfour-hmac-md5, arcfour-hmac-md5-exp, des-cbc-md5, des-cbc-crc.
Sets the proxiable flag in all tickets. This allows users to create a proxy ticket that can be transferred to a kerberized service to allow that service to perform some function on behalf of the original user. This option can also be set in the [appdefaults] or [realms] section (see below) to limit its use in particular applications or just to a specific realm.
Requests renewable tickets, with a total lifetime of lifetime. The value for lifetime must be followed immediately by one of the following delimiters: s
seconds
minutes
hours
days
renew_lifetime = 90m
Do not mix units. A value of "3h30m" results in an error.
Sets the requested maximum lifetime of the ticket. The values for lifetime follow the format described for the renew_lifetime option, above.
Indicates whether DNS SRV records need to be used to locate the KDCs and the other servers for a realm, if they have not already been listed in the [realms] section. This option makes the machine vulnerable to a certain type of DoS attack if someone spoofs the DNS records and does a redirect to another server. This is, however, no worse than a DoS, since the bogus KDC is unable to decode anything sent (excepting the initial ticket request, which has no encrypted data). Also, anything the fake KDC sends out isl not trusted without verification (the local machine is unaware of the secret key to be used). If dns_lookup_kdc is not specified but dns_fallback is, then that value is used instead. In either case, values (if present) in the [realms] section override DNS. dns_lookup_kdc is enabled by default.
Indicates whether DNS TXT records need to be used to determine the Kerberos realm information and/or the host/domain name-to-realm mapping of a host, if this information is not already present in the krb5.conf file. Enabling this option might make the host vulnerable to a redirection attack, wherein spoofed DNS replies persuade a client to authenticate to the wrong realm. In a realm with no cross-realm trusts, this a DoS attack. If dns_lookup_realm is not specified but dns_fallback is, then that value is used instead. In either case, values (if present) in the [libdefaults] and [domain_realm] sections override DNS.
Generic flag controlling the use of DNS for retrieval of information about Kerberos servers and host/domain name-to-realm mapping. If both dns_lookup_kdc and dns_lookup_realm have been specified, this option has no effect.
If true, the local keytab file (/etc/krb5/krb5.keytab) must contain an entry for the local host principal, for example, host/foo.example.net@EXAMPLE.COM. This entry is needed to verify that the TGT requested was issued by the same KDC that issued the key for the host principal. If undefined, the behavior is as if this option were set to true. Setting this value to false leaves the system vulnerable to DNS spoofing attacks. This parameter can be in the [realms] section to set it on a per-realm basis, or it can be in the [libdefaults] section to make it a network-wide setting for all realms.
The following relations can be found in the [appdefaults] section, though not all relations are recognized by all kerberized applications. Some are specific to particular applications. autologin = [true | false]
Forces the application to attempt automatic login by presenting Kerberos credentials. This is valid for the following applications: rlogin, rsh, rcp, rdist, and telnet.
Forces applications to use encryption by default (after authentication) to protect the privacy of the sessions. This is valid for the following applications: rlogin, rsh, rcp, rdist, and telnet.
Forces applications to forward the user'ss credentials (after authentication) to the remote server. This is valid for the following applications: rlogin, rsh, rcp, rdist, and telnet.
See the description in the [libdefaults] section above. This is used by any application that creates a ticket granting ticket and also by applications that can forward tickets to a remote server.
See the description in the [libdefaults] section above. This is used by any application that creates a ticket granting ticket.
Creates a TGT that can be renewed (prior to the ticket expiration time). This is used by any application that creates a ticket granting ticket.
Creates tickets with no address bindings. This is to allow tickets to be used across a NAT boundary or when using multi-homed systems. This option is valid in the kinit [appdefault] section only.
Sets the maximum lifetime of the ticket, with a total lifetime of lifetime. The values for lifetime follow the format described in the [libdefaults] section above. This option is obsolete and is removed in a future release of the Solaris operating system.
Requests renewable tickets, with a total lifetime of lifetime. The values for lifetime follow the format described in the [libdefaults] section above. This option is obsolete and is removed in a future release of the Solaris operating system.
Specifies which Kerberized "rcmd" protocol to use when using the Kerberized rlogin(1), rsh(1), rcp(1), or rdist(1) programs. The default is to use rcmdv2 by default, as this is the more secure and more recent update of the protocol. However, when talking to older MIT or SEAM-based "rcmd" servers, it can be necessary to force the new clients to use the older rcmdv1 protocol. This option is valid only for the following applications: rlogin, rcp, rsh, and rdist.
The following application defaults can be set to true or false:
kinit forwardable = true proxiable = true renewable = true no_addresses = true max_life = delta_time max_renewable_life = delta_time
See kinit(1) for the valid time duration formats you can specify for delta_time.
In the following example, kinit gets forwardable tickets by default and telnet has three default behaviors specified:
[appdefaults]
kinit = {
forwardable = true
}
telnet = {
forward = true
encrypt = true
autologin = true
}
The application defaults specified here are overridden by those specified in the [realms] section.
Identifies the host where the Kerberos administration daemon (kadmind) is running. Typically, this is the master KDC.
Application defaults that are specific to a particular realm can be specified within a [realms] subsection. Realm-specific application defaults override the global defaults specified in the [appdefaults] section.
For use in the default realm, non-default realms can be equated with the default realm for authenticated name-to-local name mapping.
This subsection allows you to set explicit mappings from principal names to local user names. The tag is the mapping name and the value is the corresponding local user name.
This tag allows you to set a general rule for mapping principal names to local user names. It is used if there is not an explicit mapping for the principal name that is being translated. The possible values are:
RULE:[<ncomps>:<format>](<regex>)s/<regex>/<text>/Each rule has three parts: First part\(emFormulate the string on which to perform operations:
If not present then the string defaults to the fully flattened principal minus the realm name. Otherwise the syntax is as follows:
"[" <ncomps> ":" <format> "]"Where: <ncomps> is the number of expected components for this rule. If the particular principal does not have this number of components, then this rule does not apply. <format> is a string of <component> or verbatim characters to be inserted. <component> is of the form "$"<number> to select the <number>th component. <number> begins from 1.
If not present, this rule can apply to all selections. Otherwise the syntax is as follows:
"(" <regex> ")"
Where:
<regex> is a selector regular expression. If this regular expression
matches the whole pattern generated from the first part, then this rule still
applies.
If not present, then the selection string is passed verbatim and is matched. Otherwise, the syntax is as follows:
<rule> ...
Where:
<rule> is of the form:
"s/" <regex> "/" <text> "/" ["g"]Regular expressions are defined in regex(7). For example: auth_to_local = RULE:[1:$1@$0](.*@.*EXAMPLE\.COM)s/@.*// The preceding maps username@EXAMPLE.COM and all sub-realms of EXAMPLE.COM to username.
The principal name is used as the local name. If the principal has more than one component or is not in the default realm, this rule is not applicable and the conversion fails.
Selects the dbmodule section entry to use to access the Kerberos database.
This allows a computer to use multiple local addresses, to allow Kerberos to work in a network that uses NATs. The addresses should be in a comma-separated list.
The name of a host running a KDC for that realm. An optional port number (separated from the hostname by a colon) can be included.
Identifies the host where the Kerberos password-changing server is running. Typically, this is the same as host indicated in the admin_server. If this parameter is omitted, the host in admin_server is used. You can also specify a port number if the server indicated by kpasswd_server runs on a port other than 464 (the default). The format of this parameter is: hostname[:port].
Identifies the protocol to be used when communicating with the server indicated by kpasswd_server. By default, this parameter is defined to be RPCSEC_GSS, which is the protocol used by Solaris-based administration servers. To be able to change a principal's password stored on non-Solaris Kerberos server, such as Microsoft Active Directory or MIT Kerberos, this value should be SET_CHANGE. This indicates that a non-RPC- based protocol is used to communicate the password change request to the server in the kpasswd_server entry.
When sending a message to the KDC, the library tries using TCP before UDP if the size of the message is above udp_preference_limit. If the message is smaller than udp_preference_limit, then UDP is tried before TCP. Regardless of the size, both protocols are tried if the first attempt fails.
If true, the local keytab file (/etc/krb5/krb5.keytab) must contain an entry for the local host principal, for example, host/foo.example.net@EXAMPLE.COM. This entry is needed to verify that the TGT requested was issued by the same KDC that issued the key for the host principal. If undefined, the behavior is as if this option were set to true. Setting this value to false leaves the system vulnerable to DNS spoofing attacks. This parameter might be in the [realms] section to set it on a per-realm basis, or it might be in the [libdefaults] section to make it a network-wide setting for all realms.
The parameters "forwardable", "proxiable", and "renew_lifetime" as described in the [libdefaults] section (see above) are also valid in the [realms] section.
Notice that kpasswd_server and kpasswd_protocol are realm-specific parameters. Most often, you need to specify them only when using a non-Solaris-based Kerberos server. Otherwise, the change request is sent over RPCSEC_GSS to the Solaris Kerberos administration server.
If no translation entry applies, the host's realm is considered to be the hostname's domain portion converted to upper case. For example, the following [domain_realm] section maps crash.mit.edu into the TEST.ATHENA.MIT.EDU realm:
[domain_realm] .mit.edu = ATHENA.MIT.EDU mit.edu = ATHENA.MIT.EDU crash.mit.edu = TEST.ATHENA.MIT.EDU .example.org = EXAMPLE.ORG example.org = EXAMPLE.ORG
All other hosts in the mit.edu domain maps by default to the ATHENA.MIT.EDU realm, and all hosts in the example.org domain maps by default into the EXAMPLE.ORG realm. The entries for the hosts mit.edu and example.org. Without these entries, these hosts would be mapped into the Kerberos realms EDU and ORG, respectively.
The following relations can be defined to specify how to log. The same relation can be repeated if you want to assign it multiple logging methods. admin_server
Specifies how to log the Kerberos administration daemon (kadmind). The default is FILE:/var/krb5/kadmin.log.
Specifies how to perform logging in the absence of explicit specifications otherwise.
The admin_server, default, and kdc relations can have the following values: FILE:filename
FILE=filename
This value causes the entity's logging messages to go to the specified file. If the `=' form is used, the file is overwritten. If the `:' form is used, the file is appended to.
This value causes the entity's logging messages to go to its standard error stream.
This value causes the entity's logging messages to go to the console, if the system supports it.
This causes the entity's logging messages to go to the specified device.
This causes the entity's logging messages to go to the system log.
The severity argument specifies the default severity of system log messages. This can be any of the following severities supported by the syslog(3C) call, minus the LOG_ prefix: LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR, LOG_WARNING, LOG_NOTICE, LOG_INFO, and LOG_DEBUG. For example, a value of CRIT would specify LOG_CRIT severity.
The facility argument specifies the facility under which the messages are logged. This can be any of the following facilities supported by the syslog(3C) call minus the LOG_ prefix: LOG_KERN, LOG_USER, LOG_MAIL, LOG_DAEMON, LOG_AUTH, LOG_LPR, LOG_NEWS, LOG_UUCP, LOG_CRON, and LOG_LOCAL0 through LOG_LOCAL7.
If no severity is specified, the default is ERR. If no facility is specified, the default is AUTH.
The following relation can be defined to specify how to rotate kdc log files if the FILE: value is being used to log: kdc_rotate
A relation subsection that enables kdc logging to be rotated to multiple files based on a time interval. This can be used to avoid logging to one file, which might grow too large and bring the KDC to a halt.
The time interval for the rotation is specified by the period relation. The number of log files to be rotated is specified by the versions relation. Both the period and versions (described below) should be included in this subsection. And, this subsection applies only if the kdc relation has a FILE: value.
The following relations can be specified for the kdc_rotate relation subsection: period=delta_time
Specifies the time interval before a new log file is created. See the TimeFormats section in kinit(1) for the valid time duration formats you can specify for delta_time. If period is not specified or set to never, no rotation occurs.
Specifying a time interval does not mean that the log files are rotated at the time interval based on real time. This is because the time interval is checked at each attempt to write a record to the log, or when logging is actually occurring. Therefore, rotation occurs only when logging has actually occurred for the specified time interval. versions=number
Specifies how many previous versions are saved before the rotation begins. A number is appended to the log file, starting with 0 and ending with (number - 1). For example, if versions is set to 2, up to three logging files are created (filename, filename.0, and filename.1) before the first one is overwritten to begin the rotation.
Notice that if versions is not specified or set to 0, only one log file is created, but it is overwritten whenever the time interval is met.
In the following example, the logging messages from the Kerberos administration daemon goes to the console. The logging messages from the KDC is appended to the /var/krb5/kdc.log, which is rotated between twenty-one log files with a specified time interval of a day.
[logging] admin_server = CONSOLE kdc = FILE:/export/logging/kadmin.log kdc_rotate = { period = 1d versions = 20 }
A client uses this section to find the authentication path between its realm and the realm of the server. The server uses this section to verify the authentication path used by the client, by checking the transited field of the received ticket.
There is a subsection for each participating realm, and each subsection has relations named for each of the realms. The relation-value is an intermediate realm which can participate in the cross-realm authentication. The relations can be repeated if there is more than one intermediate realm. A value of '.' means that the two realms share keys directly, and no intermediate realms should be allowed to participate.
There are n**2 possible entries in this table, but only those entries which is needed on the client or the server need to be present. The client needs a subsection named for its local realm, with relations named for all the realms of servers it needs to authenticate with. A server needs a subsection named for each realm of the clients it serves.
For example, ANL.GOV, PNL.GOV, and NERSC.GOV all wish to use the ES.NET realm as an intermediate realm. ANL has a sub realm of TEST.ANL.GOV, which authenticates with NERSC.GOV but not PNL.GOV. The [capath] section for ANL.GOV systems would look like this:
[capaths]
ANL.GOV = {
TEST.ANL.GOV = .
PNL.GOV = ES.NET
NERSC.GOV = ES.NET
ES.NET = .
}
TEST.ANL.GOV = {
ANL.GOV = .
}
PNL.GOV = {
ANL.GOV = ES.NET
}
NERSC.GOV = {
ANL.GOV = ES.NET
}
ES.NET = {
ANL.GOV = .
}
The [capath] section of the configuration file used on NERSC.GOV systems would look like this:
[capaths]
NERSC.GOV = {
ANL.GOV = ES.NET
TEST.ANL.GOV = ES.NET
TEST.ANL.GOV = ANL.GOV
PNL.GOV = ES.NET
ES.NET = .
}
ANL.GOV = {
NERSC.GOV = ES.NET
}
PNL.GOV = {
NERSC.GOV = ES.NET
}
ES.NET = {
NERSC.GOV = .
}
TEST.ANL.GOV = {
NERSC.GOV = ANL.GOV
NERSC.GOV = ES.NET
}
In the above examples, the ordering is not important, except when the same relation is used more than once. The client uses this to determine the path. (It is not important to the server, since the transited field is not sorted.)
The search order is:
1. realm-specific subsection of [libdefaults]
[libdefaults] EXAMPLE.COM = { pkinit_anchors = FILE:/usr/local/example.com.crt
2. realm-specific value in the [realms] section
[realms]
OTHERREALM.ORG = {
pkinit_anchors = FILE:/usr/local/otherrealm.org.crt
3. generic value in the [libdefaults] section
[libdefaults] pkinit_anchors = DIR:/usr/local/generic_trusted_cas/
The syntax for specifying Public Key identity, trust, and revocation information for pkinit is as follows: pkinit_identities = URI
Specifies the location(s) to be used to find the user's X.509 identity information. This option can be specified multiple times. Each value is attempted in order until identity information is found and authentication is attempted. These values are not used if the user specifies X509_user_identity on the command line. Valid URI types are FILE, DIR, PKCS11, PKCS12, and ENV. See the PKINIT URI Types section for more details.
Specifies the location of trusted anchor (root) certificates which the client trusts to sign KDC certificates. This option can be specified multiple times. These values from the config file are not used if the user specifies X509_anchors on the command line. Valid URI types are FILE and DIR. See the PKINIT URI Types section for more details.
Specifies the location of intermediate certificates which can be used by the client to complete the trust chain between a KDC certificate and a trusted anchor. This option can be specified multiple times. Valid URI types are FILE and DIR. See the PKINIT URI Types section for more details.
Specifies the location of Certificate Revocation List (CRL) information to be used by the client when verifying the validity of the KDC certificate presented. This option can be specified multiple times. The only valid URI type is DIR. See the PKINIT URI Types section for more details.
The default certificate verification process always checks the available revocation information to see if a certificate has been revoked. If a match is found for the certificate in a CRL, verification fails. If the certificate being verified is not listed in a CRL, or there is no CRL present for its issuing CA, and pkinit_require_crl_checking is false, then verification succeeds. However, if pkinit_require_crl_checking is true and there is no CRL information available for the issuing CA, then verification fails. pkinit_require_crl_checking should be set to true if the policy is such that up-to-date CRLs must be present for every CA.
Specifies the size of the Diffie-Hellman key the client attempts to use. The acceptable values are currently 1024, 2048, and 4096. The default is 2048.
This flag specifies whether the target realm is assumed to support only the old, pre-RFC version of the protocol. The default is false.
If this flag is set to true, it expects that the target KDC is patched to return a reply with a checksum rather than a nonce. The default is false.
This option specifies what Extended Key Usage value the KDC certificate presented to the client must contain. If the KDC certificate has the pkinit SubjectAlternativeName encoded as the Kerberos TGS name, EKU checking is not necessary since the issuing CA has certified this as a KDC certificate. The values recognized in the krb5.conf file are: kpKDC
This is the default value and specifies that the KDC must have the id-pkinit-KPKdc EKU as defined in RFC4556.
If kpServerAuth is specified, a KDC certificate with the id-kp-serverAuth EKU as used by Microsoft is accepted.
If none is specified, then the KDC certificate is not checked to verify it has an acceptable EKU. The use of this option is not recommended.
The presence of this option indicates that the client is willing to accept a KDC certificate with a dNSName SAN (Subject Alternative Name) rather than requiring the id-pkinit-san as defined in RFC4556. This option can be specified multiple times. Its value should contain the acceptable hostname for the KDC (as contained in its certificate).
Specifies matching rules that the client certificate must match before it is used to attempt pkinit authentication. If a user has multiple certificates available (on a smart card, or by way of another media), there must be exactly one certificate chosen before attempting pkinit authentication. This option can be specified multiple times. All the available certificates are checked against each rule in order until there is a match of exactly one certificate. The Subject and Issuer comparison strings are the RFC2253 string representations from the certificate Subject DN and Issuer DN values. The syntax of the matching rules is:
[relation-operator]component-rule `...'where relation-operator
Specify relation-operator as &&, meaning all component rules must match, or ||, meaning only one component rule must match. If relation-operator is not specified, the default is &&.
There is no punctuation or white space between component rules.Specify component-rule as one of the following:
`<SUBJECT>'regular-expression `<ISSUER>'regular-expression `<SAN>'regular-expression `<EKU>'extended-key-usage-list where extended-key-usage-list is a comma-separated list of required Extended Key Usage values. All values in the list must be present in the certificate. `pkinit' `msScLogin' `clientAuth' `emailProtection' `<KU>'key-usage-list where key-usage-list is a comma-separated list of required Key Usage values. All values in the list must be present in the certificate. `digitalSignature'
pkinit_cert_match = ||<SUBJECT>.*DoE.*<SAN>.*@EXAMPLE.COM pkinit_cert_match = &&<EKU>msScLogin,clientAuth<ISSUER>.*DoE.* pkinit_cert_match = <EKU>msScLogin,clientAuth<KU>digitalSignature
This option has context-specific behavior. pkinit_identities
file-name specifies the name of a PEM-format file containing the user's certificate. If key-file-name is not specified, the user's private key is expected to be in file-name as well. Otherwise, key-file-name is the name of the file containing the private key.
pkinit_pool
file-name is assumed to be the name of an OpenSSL-style ca-bundle file. The ca-bundle file should be base-64 encoded.
This option has context-specific behavior. pkinit_identities
directory-name specifies a directory with files named *.crt and *.key, where the first part of the file name is the same for matching pairs of certificate and private key files. When a file with a name ending with .crt is found, a matching file ending with .key is assumed to contain the private key. If no such file is found, then the certificate in the .crt is not used.
pkinit_pool
directory-name is assumed to be an OpenSSL-style hashed CA directory where each CA cert is stored in a file named hash-of-ca-cert.#. This infrastructure is encouraged, but all files in the directory are examined and if they contain certificates (in PEM format), they are used.
pkcs12-file-name is the name of a PKCS #12 format file, containing the user's certificate and private key.
All keyword/values are optional. PKCS11 modules (for example, opensc-pkcs11.so) must be installed as a crypto provider under libpkcs11(3LIB). slotid= and/or token= can be specified to force the use of a particular smart card reader or token if there is more than one available. certid= and/or certlabel= can be specified to force the selection of a particular certificate on the device. See the pkinit_cert_match configuration option for more ways to select a particular certificate to use for pkinit.
environment-variable-name specifies the name of an environment variable which has been set to a value conforming to one of the previous values. For example, ENV:X509_PROXY, where environment variable X509_PROXY has been set to FILE:/tmp/my_proxy.pem.
Name of the plug-in library. To use the LDAP KDB plug-in the name must be kdb_ldap. The default value is db2.
Path to the Network Security Services (NSS) trusted database for an SSL connection. This is a required parameter when using the LDAP KDB plug-in.
Number of connections per LDAP instance. The default is 5.
Bind DN for kadmind. This specifies the DN that the kadmind service uses when binding to the LDAP Directory Server. The password for this bind DN should be in the ldap_service_password_file.
Bind DN for a Key Distribution Center (KDC). This specifies the DN that the krb5kdc service use when binding to the LDAP Directory Server. The password for this bind DN should be in the ldap_service_password_file.
List of LDAP directory servers in URI format. Use of either of the following is acceptable.
ldap://<ds hostname>:<SSL port> ldap://<ds hostname>Each server URI should be separated by whitespace.
File containing stashed passwords used by the KDC when binding to the LDAP Directory Server. The default is /var/krb5/service_passwd. This file is created using kdb5_ldap_util(8).
Port number for SSL connection with directory server. The default is 389.
The following is an example of a generic krb5.conf file:
[libdefaults]
default_realm = ATHENA.MIT.EDU
default_tkt_enctypes = des-cbc-crc
default_tgs_enctypes = des-cbc-crc
[realms]
ATHENA.MIT.EDU = {
kdc = kerberos.mit.edu
kdc = kerberos-1.mit.edu
kdc = kerberos-2.mit.edu
admin_server = kerberos.mit.edu
auth_to_local_realm = KRBDEV.ATHENA.MIT.EDU
}
EXAMPLE.ORG = {
kdc = kerberos.example.org
kdc = kerberos-1.example.org
admin_server = kerberos.example.org
}
[domain_realm]
.mit.edu = ATHENA.MIT.EDU
mit.edu = ATHENA.MIT.EDU
Example 2 KDC Using the LDAP KDB plug-in, realms and dbmodules Sections
The following is an example of the realms and dbmodules sections of a Kerberos configuration file when the KDC is using the LDAP KDB plug-in.
[realms] EXAMPLE.COM = { kdc = kc-umpk-01.athena.mit.edu kdc = kc-umpk-02.athena.mit.edu admin_server = kc-umpk-01.athena.mit.edu database_module = LDAP } [dbmodules] LDAP = { db_library = kdb_ldap ldap_kerberos_container_dn = "cn=krbcontainer,dc=mit,dc=edu" ldap_kdc_dn = "cn=kdc service,ou=profile,dc=mit,dc=edu" ldap_kadmind_dn = "cn=kadmin service,ou=profile,dc=mit,dc=edu" ldap_cert_path = /var/ldap ldap_servers = ldaps://ds.mit.edu }
KDC logging file
| ATTRIBUTE TYPE ATTRIBUTE VALUE |
| Interface Stability See below. |
All of the keywords are Committed, except for the PKINIT keywords, which are Volatile.
Error initializing krb5: Improper format of item
To bypass any other problems that might occur, you should fix the file as soon as possible.
The max_life and max_renewable_life options are obsolete and is removed in a future release of the Solaris operating system.