Copyright (c) 2004, Sun Microsystems, Inc. All Rights Reserved
The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
/dev/diskette0
/dev/rdiskette0
/dev/diskette[0-1]
/dev/rdiskette[0-1]
The fd and fdc drivers provide the interfaces to floppy disks using the Intel 8272, Intel 82077, NEC 765, or compatible disk controllers on x86 based systems.
The default partitions for the floppy driver are: a
All cylinders except the last
Only the last cylinder
Entire diskette
The fd driver autosenses the density of the diskette.
When the floppy is first opened the driver looks for a SunOS label in logical block 0 of the diskette. If attempts to read the SunOS label fail, the open will fail. If block 0 is read successfully but a SunOS label is not found, auto-sensed geometry and default partitioning are assumed.
The fd driver supports both block and raw interfaces.
The block files (/dev/diskette*) access the diskette using the system's normal buffering mechanism and may be read and written without regard to physical diskette records.
There is also a raw (/dev/rdiskette*) interface that provides for direct transmission between the diskette and the user's read or write buffer. A single read(2) or write(2) call usually results in one I/O operation; therefore raw I/O is considerably more efficient when larger blocking factors are used. A blocking factor of no less than 8 Kbytes is recommended. See the Notes section, below, for information on the number of sectors per track.
For 3.5" double-sided diskettes, the following densities are supported:
80 cylinders, 21 sectors per track, 1.7 Mbyte capacity
80 cylinders, 18 sectors per track, 1.44 Mbyte capacity
80 cylinders, 9 sectors per track, 720 Kbyte capacity
80 cylinders, 36 sectors per track, 2.88 Mbyte capacity
80 cylinders, 21 sectors per track, 1.7 Mbyte capacity
80 cylinders, 18 sectors per track, 1.44 Mbyte capacity
80 cylinders, 9 sectors per track, 760 Kbyte capacity
For 5.25" double-sided diskettes on x86 platforms, the densities listed below are supported:
5.25" diskettes are not supported on SPARC platforms.
80 cylinders, 15 sectors per track, 1.2 Mbyte capacity
40 cylinders, 9 sectors per track, 360 Kbyte capacity
40 cylinders, 8 sectors per track, 320 Kbyte capacity
80 cylinders, 9 sectors per track, 720 Kbyte capacity
40 cylinders, 16 sectors per track (256 bytes per sector), 320 Kbyte capacity
40 cylinders, 4 sectors per track (1024 bytes per sector), 320 Kbyte capacity
During opening, the partition has been opened for exclusive access and another process wants to open the partition. Once open, this error is returned if the floppy disk driver attempted to pass a command to the floppy disk controller when the controller was busy handling another command. In this case, the application should try the operation again.
An invalid address was specified in an ioctl command (see fdio(4I)).
The number of bytes read or written is not a multiple of the diskette's sector size. This error is also returned when an unsupported command is specified using the FDIOCMD ioctl command (see fdio(4I)).
During opening, the diskette does not have a label or there is no diskette in the drive. Once open, this error is returned if the requested I/O transfer could not be completed.
An attempt was made to write past the end of the diskette.
The floppy disk driver does not support the requested ioctl functions (see fdio(4I)).
The floppy disk device does not exist or the device is not ready.
The floppy disk device is opened for write access and the diskette in the drive is write protected.
The floppy disk device does not support the requested ioctl function ( FDEJECT).
The driver attempts to initialize itself using the information found in the configuration file, /platform/i86pc/kernel/drv/fd.conf.
name="fd" parent="fdc" unit=0; name="fd" parent="fdc" unit=1;
driver module
structs and definitions for Intel 82072 and 82077 controllers
structs and definitions for floppy drivers
device file
device file
raw device file
raw device file
block file
raw file
directory containing volume management character device file
directory containing the volume management raw character device file
symbolic link to the entry in /dev/rdiskette0
driver module
configuration file for floppy driver
floppy-controller driver module
configuration file for the floppy-controller
structs and definitions for x86 floppy devices
structs and definitions for x86 floppy media
device file
device file
raw device file
raw device file
block file
raw file
directory containing volume management character device file
directory containing the volume management raw character device file
symbolic link to the entry in /dev/rdiskette0
device file
raw device file
block file
raw file
directory containing volume management character device file
directory containing the volume management raw character device file
symbolic link to the entry in /dev/rdiskette1
fdformat(1), dd(8), drvconfig(8), read(2), write(2), driver.conf(5), dkio(4I) fdio(4I)
The <command name> failed after several retries on drive <n>. The three hex values in parenthesis are the contents of status register 0, status register 1, and status register 2 of the Intel 8272, the Intel 82072, and the Intel 82077 Floppy Disk Controller on completion of the command, as documented in the data sheet for that part. This error message is usually followed by one of the following, interpreting the bits of the status register: fd<n>:
not writable
crc error blk <block number> There was a data error on <block number>.
bad format
timeout
drive not ready
unformatted diskette or no diskette in drive
block <block number> is past the end! (nblk=<total number of blocks>) The operation tried to access a block number that is greater than the total number of blocks.
b_bcount 0x<op_size> not % 0x<sect_size> The size of an operation is not a multiple of the sector size.
host bus error. There was a hardware error on a system bus.
Overrun/underrun errors occur when accessing a diskette while the system is heavily loaded. Decrease the load on the system and retry the diskette access.
3.5" high density diskettes have 18 sectors per track and 5.25" high density diskettes have 15 sectors per track. They can cross a track (though not a cylinder) boundary without losing data, so when using dd(8) or read(2)/write(2) calls to or from the raw diskette, you should specify bs=18k or multiples thereof for 3.5" diskettes, and bs=15k or multiples thereof for 5.25" diskettes.
The SPARC fd driver is not an unloadable module.
Under Solaris (x86 Edition), the configuration of the floppy drives is specified in CMOS configuration memory. Use the BIOS setup program for the system to define the diskette size and density/capacity for each installed drive. Note that MS-DOS may operate the floppy drives correctly, even though the CMOS configuration may be in error. Solaris (x86 Edition) relies on the CMOS configuration to be accurate.