Copyright 1987, 1989 by the Student Information Processing Board of the Massachusetts Institute of Technology. For copying and distribution information, please see the file kerberosv5/mit-sipb-copyright.h.
Portions Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved
The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. See the License for the specific language governing permissions and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
/usr/bin/kinit [-ARvV] [-p | -P] [-f | -F] [-a] [-c cache_name] [-k [-t keytab_file]] [-l lifetime] [-r renewable_life] [-s start_time] [-S service_name] [principal]
When you use kinit without options, the utility prompts for your principal and Kerberos password, and tries to authenticate your login with the local Kerberos server. The principal can be specified on the command line if desired.
If Kerberos authenticates the login attempt, kinit retrieves your initial ticket-granting ticket and puts it in the ticket cache. By default your ticket is stored in the file /tmp/krb5cc_uid, where uid specifies your user identification number. Tickets expire after a specified lifetime, after which kinit must be run again. Any existing contents of the cache are destroyed by kinit.
Values specified in the command line override the values specified in the Kerberos configuration file for lifetime and renewable_life.
The kdestroy(1) command can be used to destroy any active tickets before you end your login session.
Requests tickets with the local addresses.
Requests address-less tickets.
Uses cache_name as the credentials (ticket) cache name and location. If this option is not used, the default cache name and location are used.
Requests forwardable tickets.
Not forwardable. Does not request forwardable tickets. Tickets that have been acquired on one host cannot normally be used on another host. A client can request that the ticket be marked forwardable. Once the TKT_FLG_FORWARDABLE flag is set on a ticket, the user can use this ticket to request a new ticket, but with a different IP address. Thus, users can use their current credentials to get credentials valid on another machine. This option allows a user to explicitly obtain a non-forwardable ticket.
Requests a host ticket, obtained from a key in the local host's keytab file. The name and location of the keytab file can be specified with the -t keytab_file option. Otherwise, the default name and location is used.
Requests a ticket with the lifetime lifetime. If the -l option is not specified, the default ticket lifetime (configured by each site) is used. Specifying a ticket lifetime longer than the maximum ticket lifetime (configured by each site) results in a ticket with the maximum lifetime. See the Time Formats section for the valid time duration formats that you can specify for lifetime. See kdc.conf(5) and kadmin(8) (for getprinc command to verify the lifetime values for the server principal). The lifetime of the tickets returned is the minimum of the following:
Value specified in the command line.
Value specified in the KDC configuration file.
Value specified in the Kerberos data base for the server principal. In the case of kinit, it is krbtgt/realm name.
Value specified in the Kerberos database for the user principal.
Requests proxiable tickets.
Not proxiable. Does not request proxiable tickets. A proxiable ticket is a ticket that allows you to get a ticket for a service with IP addresses other than the ones in the Ticket Granting Ticket. This option allows a user to explicitly obtain a non-proxiable ticket.
Requests renewable tickets, with a total lifetime of renewable_life. See the Time Formats section for the valid time duration formats that you can specify for renewable_life. See kdc.conf(5) and kadmin(8) (for getprinc command to verify the lifetime values for the server principal). The renewable lifetime of the tickets returned is the minimum of the following:
Value specified in the command line.
Value specified in the KDC configuration file.
Value specified in the Kerberos data base for the server principal. In the case of kinit, it is krbtgt/realm name.
Value specified in the Kerberos database for the user principal.
Requests renewal of the ticket-granting ticket. Notice that an expired ticket cannot be renewed, even if the ticket is still within its renewable life.
Requests a postdated ticket, valid starting at start_time. Postdated tickets are issued with the invalid flag set, and need to be fed back to the KDC before use. See the Time Formats section for either the valid absolute time or time duration formats that you can specify for start_time. kinit attempts to match an absolute time first before trying to match a time duration.
Specifies an alternate service name to use when getting initial tickets.
Requests that the ticket granting ticket in the cache (with the invalid flag set) be passed to the KDC for validation. If the ticket is within its requested time range, the cache is replaced with the validated ticket.
Verbose output. Displays further information to the user, such as confirmation of authentication and version.
Specifies a pre-authentication attribute and value to be passed to pre-authentication plugins. The acceptable attribute and value values vary from pre-authentication plugin to plugin. This option can be specified multiple times to specify multiple attributes. If no value is specified, it is assumed to be yes. The following attributes are recognized by the OpenSSL pkinit pre-authentication mechanism: X509_user_identity=URI
Specifies where to find user's X509 identity information. Valid URI types are FILE, DIR, PKCS11, PKCS12, and ENV. See the PKINIT URI Types section for details.
Specifies where to find trusted X509 anchor information. Valid URI types are FILE and DIR. See the PKINIT URI Types section for details.
Specifies the use of RSA, rather than the default Diffie-Hellman protocol.
This option has context-specific behavior. X509_user_identity
file-name specifies the name of a PEM-format file containing the user's certificate. If key-file-name is not specified, the user's private key is expected to be in file-name as well. Otherwise, key-file-name is the name of the file containing the private key.
file-name is assumed to be the name of an OpenSSL-style ca-bundle file. The ca-bundle file should be base-64 encoded.
This option has context-specific behavior. X509_user_identity
directory-name specifies a directory with files named *.crt and *.key, where the first part of the file name is the same for matching pairs of certificate and private key files. When a file with a name ending with .crt is found, a matching file ending with .key is assumed to contain the private key. If no such file is found, then the certificate in the .crt is not used.
directory-name is assumed to be an OpenSSL-style hashed CA directory where each CA cert is stored in a file named hash-of-ca-cert.#. This infrastructure is encouraged, but all files in the directory are examined and if they contain certificates (in PEM format), and are used.
pkcs12-file-name is the name of a PKCS #12 format file, containing the user's certificate and private key.
All keyword and values are optional. PKCS11 modules (for example, opensc-pkcs11.so) must be installed as a crypto provider under libpkcs11(3LIB). slotid= and/or token= can be specified to force the use of a particular smard card reader or token if there is more than one available. certid= and/or certlabel= can be specified to force the selection of a particular certificate on the device. See the pkinit_cert_match configuration option for more ways to select a particular certificate to use for pkinit.
environment-variable-name specifies the name of an environment variable which has been set to a value conforming to one of the previous values. For example, ENV:X509_PROXY, where environment variable X509_PROXY has been set to FILE:/tmp/my_proxy.pem.
| Absolute Time Format Example |
| yymmddhhmm[ss] 990702133530 |
| hhmm[ss] 133530 |
| yy.mm.dd.hh.mm.ss 99:07:02:13:35:30 |
| hh:mm[:ss] 13:35:30 |
| ldate:ltime 07-07-99:13:35:30 |
| dd-month-yyyy:hh:mm[:ss] 02-july-1999:13:35:30 |
| Variable Description |
| dd day |
| hh hour (24-hour clock) |
| mm minutes |
| ss seconds |
| yy |
| year within century (0-68 is 2000 to 2068; 69-99 is 1969 to 1999) |
| yyyy year including century |
| month locale's full or abbreviated month name |
| ldate locale's appropriate date representation |
| ltime locale's appropriate time representation |
The following time duration formats can be used for the -l lifetime, -r renewable_life, and -s start_time options. The examples are based on the time duration of 14 days, 7 hours, 5 minutes, and 30 seconds.
| Time Duration Format Example |
| #d 14d |
| #h 7h |
| #m 5m |
| #s 30s |
| #d#h#m#s 14d7h5m30s |
| #h#m[#s] 7h5m30s |
| days-hh:mm:ss 14-07:05:30 |
| hours:mm[:ss] 7:05:30 |
| Delimiter Description |
| d number of days |
| h number of hours |
| m number of minutes |
| s number of seconds |
| Variable Description |
| # number |
| days number of days |
| hours number of hours |
| hh hour (24-hour clock) |
| mm minutes |
| ss seconds |
Location of the credentials (ticket) cache. See krb5envvar(7) for syntax and details.
Default credentials cache (uid is the decimal UID of the user).
Default location for the local host's keytab file.
Default location for the local host's configuration file. See krb5.conf(5).
| ATTRIBUTE TYPE ATTRIBUTE VALUE |
| Interface Stability See below. |
The command arguments are Evolving. The command output is Unstable.