Sun Microsystems, Inc. gratefully acknowledges The Open Group for
permission to reproduce portions of its copyrighted documentation.
Original documentation from The Open Group can be obtained online at
http://www.opengroup.org/bookstore/.
The Institute of Electrical and Electronics Engineers and The Open
Group, have given us permission to reprint portions of their
documentation.
In the following statement, the phrase ``this text'' refers to portions
of the system documentation.
Portions of this text are reprinted and reproduced in electronic form
in the SunOS Reference Manual, from IEEE Std 1003.1, 2004 Edition,
Standard for Information Technology -- Portable Operating System
Interface (POSIX), The Open Group Base Specifications Issue 6,
Copyright (C) 2001-2004 by the Institute of Electrical and Electronics
Engineers, Inc and The Open Group. In the event of any discrepancy
between these versions and the original IEEE and The Open Group
Standard, the original IEEE and The Open Group Standard is the referee
document. The original Standard can be obtained online at
http://www.opengroup.org/unix/online.html.
This notice shall appear on any product containing this material.
The contents of this file are subject to the terms of the
Common Development and Distribution License (the "License").
You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
or http://www.opensolaris.org/os/licensing.
See the License for the specific language governing permissions
and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each
file and include the License file at usr/src/OPENSOLARIS.LICENSE.
If applicable, add the following below this CDDL HEADER, with the
fields enclosed by brackets "[]" replaced with your own identifying
information: Portions Copyright [yyyy] [name of copyright owner]
Copyright 1989 AT&T
Portions Copyright (c) 1992, X/Open Company Limited All Rights Reserved
Copyright (c) 2004, Sun Microsystems, Inc. All Rights Reserved
Copyright 2011 Nexenta Systems, Inc. All rights reserved.
Copyright (c) 2017 Joyent, Inc.
/usr/bin/date [-u] [-r seconds | filename] [-R] [+format]
/usr/bin/date [-a [-]sss.fff]
/usr/bin/date [-u] [ [mmdd] HHMM | mmddHHMM [cc] yy] [.SS]
/usr/xpg4/bin/date [-u] [-r seconds | filename] [-R] [+format]
/usr/xpg4/bin/date [-a [-]sss.fff]
/usr/xpg4/bin/date [-u] [ [mmdd] HHMM | mmddHHMM [cc] yy] [.SS]
The date utility writes the date and time to standard output or attempts to set the system date and time. By default, the current date and time is written.
Specifications of native language translations of month and weekday names are supported. The month and weekday names used for a language are based on the locale specified by the environment variable LC_TIME. See environ(5).
The following is the default form for the "C" locale:
%a %b %e %T %Z %Y
For example,
Fri Dec 23 10:10:42 EST 1988
The following options are supported: -a [\|-\|]\|sss.fff
Slowly adjust the time by sss.fff seconds (fff represents fractions of a second). This adjustment can be positive or negative. The system's clock is sped up or slowed down until it has drifted by the number of seconds specified. Only the super-user may adjust the time.
Rather than using the current time, obtain the time based on seconds. seconds will be treated as time since the UNIX Epoch (00:00:00 UTC, January 1, 1970).
Rather than using the current time, obtain the time based on the modification time of filename.
Change the default format to the format used for mail message headers (similar to RFC 822 format). The default format becomes
%a, %d %h %Y %H:%M:%S %z
Display (or set) the date in Greenwich Mean Time (GMT\(emuniversal time), bypassing the normal conversion to (or from) local time.
The following operands are supported: +format
If the argument begins with +, the output of date is the result of passing format and the current time to strftime(). date uses the conversion specifications listed on the strftime(3C) manual page, with the conversion specification for %C determined by whether /usr/bin/date or /usr/xpg4/bin/date is used: /usr/bin/date
Locale's date and time representation. This is the default output for date.
Century (a year divided by 100 and truncated to an integer) as a decimal number [00-99].
Month number
Day number in the month
Hour number (24 hour system)
Minute number
Second number
Century (a year divided by 100 and truncated to an integer) as a decimal number [00-99]. For example, cc is 19 for the year 1988 and 20 for the year 2007.
Last two digits of the year number. If century (cc) is not specified, then values in the range 69-99 shall refer to years 1969 to 1999 inclusive, and values in the range 00-68 shall refer to years 2000 to 2068, inclusive.
The month, day, year number, and century may be omitted; the current values are applied as defaults. For example, the following entry:
example% date 10080045
sets the date to Oct 8, 12:45 a.m. The current year is the default because no year is supplied. The system operates in GMT. date takes care of the conversion to and from local standard and daylight time. Only the super-user may change the date. After successfully setting the date and time, date displays the new date according to the default format. The date command uses TZ to determine the correct time zone information; see environ(5).
Example 1 Generating Output
The following command:
example% date '+DATE: %m/%d/%y%nTIME:%H:%M:%S'
generates as output
DATE: 08/01/76 TIME: 14:45:05
Example 2 Setting the Current Time
The following command sets the current time to 12:34:56:
example# date 1234.56
Example 3 Setting Another Time and Date in Greenwich Mean Time
The following command sets the date to January 1st, 12:30 am, 2000:
example# date -u 010100302000
This is displayed as:
Thu Jan 01 00:30:00 GMT 2000
See environ(5) for descriptions of the following environment variables that affect the execution of date: LANG, LC_ALL, LC_CTYPE, LC_TIME, LC_MESSAGES, and NLSPATH. TZ
Determine the timezone in which the time and date are written, unless the -u option is specified. If the TZ variable is not set and the -u is not specified, the system default timezone is used.
The following exit values are returned: 0
Successful completion.
An error occurred.
See attributes(5) for descriptions of the following attributes:
| ATTRIBUTE TYPE ATTRIBUTE VALUE |
| CSI enabled |
| ATTRIBUTE TYPE ATTRIBUTE VALUE |
| CSI enabled |
| Interface Stability Standard |
strftime(3C), attributes(5), environ(5), standards(5)
You are not the super-user and you tried to change the date.
The date set is syntactically incorrect.
If you attempt to set the current date to one of the dates that the standard and alternate time zones change (for example, the date that daylight time is starting or ending), and you attempt to set the time to a time in the interval between the end of standard time and the beginning of the alternate time (or the end of the alternate time and the beginning of standard time), the results are unpredictable.
Using the date command from within windowing environments to change the date can lead to unpredictable results and is unsafe. It can also be unsafe in the multi-user mode, that is, outside of a windowing system, if the date is changed rapidly back and forth. The recommended method of changing the date is 'date -a'.
Setting the system time or allowing the system time to progress beyond 03:14:07 UTC Jan 19, 2038 is not supported on Solaris.