Sun Microsystems, Inc. gratefully acknowledges The Open Group for
permission to reproduce portions of its copyrighted documentation.
Original documentation from The Open Group can be obtained online at
http://www.opengroup.org/bookstore/.
The Institute of Electrical and Electronics Engineers and The Open
Group, have given us permission to reprint portions of their
documentation.
In the following statement, the phrase ``this text'' refers to portions
of the system documentation.
Portions of this text are reprinted and reproduced in electronic form
in the SunOS Reference Manual, from IEEE Std 1003.1, 2004 Edition,
Standard for Information Technology -- Portable Operating System
Interface (POSIX), The Open Group Base Specifications Issue 6,
Copyright (C) 2001-2004 by the Institute of Electrical and Electronics
Engineers, Inc and The Open Group. In the event of any discrepancy
between these versions and the original IEEE and The Open Group
Standard, the original IEEE and The Open Group Standard is the referee
document. The original Standard can be obtained online at
http://www.opengroup.org/unix/online.html.
This notice shall appear on any product containing this material.
The contents of this file are subject to the terms of the
Common Development and Distribution License (the "License").
You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
or http://www.opensolaris.org/os/licensing.
See the License for the specific language governing permissions
and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each
file and include the License file at usr/src/OPENSOLARIS.LICENSE.
If applicable, add the following below this CDDL HEADER, with the
fields enclosed by brackets "[]" replaced with your own identifying
information: Portions Copyright [yyyy] [name of copyright owner]
Copyright 1989 AT&T
Portions Copyright (c) 1992, X/Open Company Limited All Rights Reserved
Copyright (c) 2009, Sun Microsystems, Inc. All Rights Reserved
Copyright (c) 2012 Gary Mills
cpio -i [-bBcdfkmPqrsStuvV6@/] [-C bufsize] [-E file] [-H header] [-I [-M message]] [-R id] [pattern]...
cpio -o [-aABcLPqvV@/] [-C bufsize] [-H header] [-O file [-M message]]
cpio -p [-adlLmPquvV@/] [-R id] directory
If the underlying file system of the source file supports detection of holes as reported by pathconf(2), the file is a sparse file, and the destination file is seekable, then holes in sparse files are preserved in pass mode, otherwise holes are filled with zeros.
cpio assumes four-byte words.
If, when writing to a character device (-o) or reading from a character device (-i), cpio reaches the end of a medium (such as the end of a diskette), and the -O and -I options are not used, cpio prints the following message:
To continue, type device/file name when ready.
To continue, you must replace the medium and type the character special device name (/dev/rdiskette for example) and press RETURN. You might want to continue by directing cpio to use a different device. For example, if you have two floppy drives you might want to switch between them so cpio can proceed while you are changing the floppies. Press RETURN to cause the cpio process to exit.
(copy in) Reads an archive from the standard input and conditionally extracts the files contained in it and places them into the current directory tree.
(copy out) Reads a list of file path names from the standard input and copies those files to the standard output in the form of a cpio archive.
(pass) Reads a list of file path names from the standard input and conditionally copies those files into the destination directory tree.
The following options can be appended in any sequence to the -i, -o, or -p options: -a
Resets access times of input files after they have been copied, making cpio's access invisible. Access times are not reset for linked files when cpio -pla is specified.
Appends files to an archive. The -A option requires the -O option. Valid only with archives that are files, or that are on floppy diskettes or hard disk partitions. The effect on files that are linked in the existing portion of the archive is unpredictable.
Reverses the order of the bytes within each word. Use only with the -i option.
Blocks input/output 5120 bytes to the record. The default buffer size is 8192 bytes when this and the -C options are not used. -B does not apply to the -p (pass) option.
Reads or writes header information in ASCII character form for portability. There are no UID or GID restrictions associated with this header format. Use this option between SVR4-based machines, or the -H odc option between unknown machines. The -c option implies the use of expanded device numbers, which are only supported on SVR4-based systems. When transferring files between SunOS 4 or Interactive UNIX and the Solaris 2.6 Operating environment or compatible versions, use -H odc.
Blocks input/output bufsize bytes to the record, where bufsize is replaced by a positive integer. The default buffer size is 8192 bytes when this and -B options are not used. -C does not apply to the -p (pass) option.
Creates directories as needed.
Specifies an input file (file) that contains a list of filenames to be extracted from the archive (one filename per line).
Copies in all files except those in patterns. See OPERANDS for a description of pattern.
Reads or writes header information in header format. Always use this option or the -c option when the origin and the destination machines are different types. This option is mutually exclusive with options -c and -6. Valid values for header are: bar
bar head and format. Used only with the -i option (read only).
ASCII header with expanded device numbers and an additional per-file checksum. There are no UID or GID restrictions associated with this header format.
ASCII header with small device numbers. This is the IEEE/P1003 Data Interchange Standard cpio header and format. It has the widest range of portability of any of the header formats. It is the official format for transferring files between POSIX-conforming systems (see standards(7)). Use this format to communicate with SunOS 4 and Interactive UNIX. This header format allows UIDs and GIDs up to 262143 to be stored in the header.
tar header and format. This is an older tar header format that allows UIDs and GIDs up to 2097151 to be stored in the header. It is provided for the reading of legacy archives only, that is, in conjunction with option -i. Specifying this archive format with option -o has the same effect as specifying the "ustar" format: the output archive is in ustar format, and must be read using -H ustar.
IEEE/P1003 Data Interchange Standard tar header and format. This header format allows UIDs and GIDs up to 2097151 to be stored in the header.
Reads the contents of file as an input archive, instead of the standard input. If file is a character special device, and the current medium has been completely read, replace the medium and press RETURN to continue to the next medium. This option is used only with the -i option.
Attempts to skip corrupted file headers and I/O errors that might be encountered. If you want to copy files from a medium that is corrupted or out of sequence, this option lets you read only those files with good headers. For cpio archives that contain other cpio archives, if an error is encountered, cpio can terminate prematurely. cpio finds the next good header, which can be one for a smaller archive, and terminate when the smaller archive's trailer is encountered. Use only with the -i option.
In pass mode, makes hard links between the source and destination whenever possible. If the -L option is also specified, the hard link is to the file referred to by the symbolic link. Otherwise, the hard link is to the symbolic link itself. Use only with the -p option.
Follows symbolic links. If a symbolic link to a directory is encountered, archives the directory referred to by the link, using the name of the link. Otherwise, archives the file referred to by the link, using the name of the link.
Retains previous file modification time. This option is ineffective on directories that are being copied.
Defines a message to use when switching media. When you use the -O or -I options and specify a character special device, you can use this option to define the message that is printed when you reach the end of the medium. One %d can be placed in message to print the sequence number of the next medium needed to continue.
Directs the output of cpio to file, instead of the standard output. If file is a character special device and the current medium is full, replace the medium and type a carriage return to continue to the next medium. Use only with the -o option.
Preserves ACLs. If the option is used for output, existing ACLs are written along with other attributes, except for extended attributes, to the standard output. ACLs are created as special files with a special file type. If the option is used for input, existing ACLs are extracted along with other attributes from standard input. The option recognizes the special file type. Notice that errors occurs if a cpio archive with ACLs is extracted by previous versions of cpio. This option should not be used with the -c option, as ACL support might not be present on all systems, and hence is not portable. Use ASCII headers for portability.
Quiet. Suppresses the number of blocks message that normally is printed after the copy is completed.
Interactively renames files. If the user types a carriage return alone, the file is skipped. If the user types a ``.'', the original pathname is retained. Not available with cpio -p.
Reassigns ownership and group information for each file to user ID. (ID must be a valid login ID from the passwd database.) This option is valid only when id is the invoking user or the super-user. See NOTES.
Swaps bytes within each half word.
Swaps halfwords within each word.
Prints a table of contents of the input. If any file in the table of contents has extended attributes, these are also listed. No files are created. -t and -V are mutually exclusive.
Copies unconditionally. Normally, an older file is not replaced a newer file with the same name, although an older directory updates a newer directory.
Verbose. Prints a list of file and extended attribute names. When used with the -t option, the table of contents looks like the output of an ls -l command (see ls(1)).
Special verbose. Prints a dot for each file read or written. Useful to assure the user that cpio is working without printing out all file names.
Processes a UNIX System Sixth Edition archive format file. Use only with the -i option. This option is mutually exclusive with -c and -H.
Includes extended attributes in archive. By default, cpio does not place extended attributes in the archive. With this flag, cpio looks for extended attributes on the files to be placed in the archive and add them, as regular files, to the archive. The extended attribute files go in the archive as special files with special file types. When the -@ flag is used with -i or -p, it instructs cpio to restore extended attribute data along with the normal file data. Extended attribute files can only be extracted from an archive as part of a normal file extract. Attempts to explicitly extract attribute records are ignored.
Includes extended system attributes in archive. By default, cpio does not place extended system attributes in the archive. With this flag, cpio looks for extended system attributes on the files to be placed in the archive and add them, as regular files, to the archive. The extended attribute files go in the archive as special files with special file types. When the -/ flag is used with -i or -p, it instructs cpio to restore extended system attribute data along with the normal file data. Extended system attribute files can only be extracted from an archive as part of a normal file extract. Attempts to explicitly extract attribute records are ignored.
A path name of an existing directory to be used as the target of cpio -p.
Expressions making use of a pattern-matching notation similar to that used by the shell (see sh(1)) for filename pattern matching, and similar to regular expressions. The following metacharacters are defined: *
Matches any string, including the empty string.
Matches any single character.
Matches any one of the enclosed characters. A pair of characters separated by `-' matches any symbol between the pair (inclusive), as defined by the system default collating sequence. If the first character following the opening `[' is a `!', the results are unspecified.
The ! (exclamation point) means not. For example, the !abc* pattern would exclude all files that begin with abc.
Example 1 Using standard input
example% ls | cpio -oc > ../newfile
When standard input is directed through a pipe to cpio -o, as in the example above, it groups the files so they can be directed (>) to a single file (../newfile). The -c option insures that the file is portable to other machines (as would the -H option). Instead of ls(1), you could use find(1), echo(1), cat(1), and so on, to pipe a list of names to cpio. You could direct the output to a device instead of a file.
Example 2 Extracting files into directories
example% cat newfile | cpio -icd "memo/a1" "memo/b*"
In this example, cpio -i uses the output file of cpio -o (directed through a pipe with cat), extracts those files that match the patterns (memo/a1, memo/b*), creates directories below the current directory as needed (-d option), and places the files in the appropriate directories. The -c option is used if the input file was created with a portable header. If no patterns were given, all files from newfile would be placed in the directory.
Example 3 Copying or linking files to another directory
example% find . -depth -print | cpio -pdlmv newdir
In this example, cpio -p takes the file names piped to it and copies or links (-l option) those files to another directory, newdir. The -d option says to create directories as needed. The -m option says to retain the modification time. (It is important to use the -depth option of find(1) to generate path names for cpio. This eliminates problems that cpio could have trying to create files under read-only directories.) The destination directory, newdir, must exist.
Notice that when you use cpio in conjunction with find, if you use the -L option with cpio, you must use the -follow option with find and vice versa. Otherwise, there are undesirable results.
For multi-reel archives, dismount the old volume, mount the new one, and continue to the next tape by typing the name of the next device (probably the same as the first reel). To stop, type a RETURN and cpio ends.
cpio creates its temporary file in /var/tmp by default. Otherwise, it uses the directory specified by TMPDIR.
Successful completion.
An error occurred.
| ATTRIBUTE TYPE ATTRIBUTE VALUE |
| CSI Enabled |
| Interface Stability Committed |
| Header type Command line options Maximum path name length |
| BINARY "-o" 256 |
| POSIX "-oH odc" 256 |
| ASCII "-oc" 1023 |
| CRC "-oH crc" 1023 |
| USTAR "-oH ustar" 255 |
When the command line options "-o -H tar" are specified, the archive created is of type USTAR. This means that it is an error to read this same archive using the command line options "-i -H tar". The archive should be read using the command line options "-i -H ustar". The options "-i -H tar" refer to an older tar archive format.
An error message is output for files whose UID or GID are too large to fit in the selected header format. Use -H crc or -c to create archives that allow all UID or GID values.
Only the super-user can copy special files.
Blocks are reported in 512-byte quantities.
If a file has 000 permissions, contains more than 0 characters of data, and the user is not root, the file is not saved or restored.
When cpio is invoked in Copy In or Pass Mode by a user with {PRIV_FILE_CHOWN_SELF} privilege, and in particular on a system where {_POSIX_CHOWN_RESTRICTED} is not in effect (effectively granting this privilege to all users where not overridden), extracted or copied files can end up with owners and groups determined by those of the original archived files, which can differ from the invoking user's. This might not be what the user intended. The -R option can be used to retain file ownership, if desired, if you specify the user's id.
The inode number stored in the header (/usr/include/archives.h) is an unsigned short, which is 2 bytes. This limits the range of inode numbers from 0 to 65535. Files which are hard linked must fall in this inode range. This could be a problem when moving cpio archives between different vendors' machines.
You must use the same blocking factor when you retrieve or copy files from the tape to the hard disk as you did when you copied files from the hard disk to the tape. Therefore, you must specify the -B or -C option.
During -p and -o processing, cpio buffers the file list presented on stdin in a temporary file.
The new pax(1) format, with a command that supports it (for example, tar), should be used for large files. The cpio command is no longer part of the current POSIX standard and is deprecated in favor of pax.