1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _FRAMEWORK_SES_H 28 #define _FRAMEWORK_SES_H 29 30 #pragma ident "%Z%%M% %I% %E% SMI" 31 32 #ifdef __cplusplus 33 extern "C" { 34 #endif 35 36 /* 37 * Node properties 38 */ 39 #define SES_PROP_ELEMENT_TYPE "ses-element-type" 40 typedef enum ses2_element_type { 41 SES_ET_UNSPECIFIED = 0, 42 SES_ET_DEVICE = 0x1, 43 SES_ET_POWER_SUPPLY = 0x2, 44 SES_ET_COOLING = 0x3, 45 SES_ET_TEMPERATURE_SENSOR = 0x4, 46 SES_ET_DOOR_LOCK = 0x5, 47 SES_ET_AUDIBLE_ALARM = 0x6, 48 SES_ET_ESC_ELECTRONICS = 0x7, 49 SES_ET_SCC_ELECTRONICS = 0x8, 50 SES_ET_NONVOLATILE_CACHE = 0x9, 51 SES_ET_INVALID_OPERATION_REASON = 0xa, 52 SES_ET_UPS = 0xb, 53 SES_ET_DISPLAY = 0xc, 54 SES_ET_KEY_PAD_ENTRY = 0xd, 55 SES_ET_ENCLOSURE = 0xe, 56 SES_ET_SCSI_PORT_XCVR = 0xf, 57 SES_ET_LANGUAGE = 0x10, 58 SES_ET_COMMUNICATION_PORT = 0x11, 59 SES_ET_VOLTAGE_SENSOR = 0x12, 60 SES_ET_CURRENT_SENSOR = 0x13, 61 SES_ET_SCSI_TARGET_PORT = 0x14, 62 SES_ET_SCSI_INITIATOR_PORT = 0x15, 63 SES_ET_SIMPLE_SUBENCLOSURE = 0x16, 64 SES_ET_ARRAY_DEVICE = 0x17, 65 SES_ET_SAS_EXPANDER = 0x18, 66 SES_ET_SAS_CONNECTOR = 0x19 67 } ses2_element_type_t; 68 69 #define SES_PROP_STATUS_CODE "ses-status-code" 70 typedef enum ses_element_status_code { 71 SES_ESC_UNSUPPORTED = 0, 72 SES_ESC_OK = 1, 73 SES_ESC_CRITICAL = 2, 74 SES_ESC_NONCRITICAL = 3, 75 SES_ESC_UNRECOVERABLE = 4, 76 SES_ESC_NOT_INSTALLED = 5, 77 SES_ESC_UNKNOWN = 6, 78 SES_ESC_UNAVAIL = 7, 79 SES_ESC_NO_ACCESS = 8 80 } ses_element_status_code_t; 81 82 #define SES_PROP_ELEMENT_CLASS_INDEX "ses-element-class-index" /* U64 */ 83 #define SES_PROP_ELEMENT_INDEX "ses-element-index" /* U64 */ 84 #define SES_PROP_BAY_NUMBER "ses-bay-number" /* U64 */ 85 #define SES_PROP_PRDFAIL "ses-failure-predicted" 86 #define SES_PROP_SWAP "ses-swapped" 87 #define SES_PROP_DISABLED "ses-disabled" 88 #define SES_PROP_IDENT "ses-identify" 89 #define SES_PROP_WARN "ses-warning" 90 #define SES_PROP_FAIL "ses-failed" 91 #define SES_PROP_WARN_REQ "ses-warning-indicator-requested" 92 #define SES_PROP_FAIL_REQ "ses-failure-indicator-requested" 93 #define SES_PROP_REPORT "ses-reported-via" 94 #define SES_PROP_RMV "ses-ready-to-remove" 95 #define SES_PROP_OFF "ses-off" 96 #define SES_PROP_REQUESTED_ON "ses-requested-on" 97 #define SES_PROP_CLASS_DESCRIPTION "ses-class-description" /* S */ 98 #define SES_PROP_DESCRIPTION "ses-description" /* S */ 99 #define SES_PROP_HOT_SWAP "ses-hot-swappable" 100 101 #define SES_PROP_CRIT_OVER "ses-critical-over" 102 #define SES_PROP_CRIT_UNDER "ses-critical-under" 103 #define SES_PROP_WARN_OVER "ses-warning-over" 104 #define SES_PROP_WARN_UNDER "ses-warning-under" 105 106 #define SES_FC_PROP_NODE_NAME "ses-fc-node-name" /* U64 */ 107 #define SES_FC_PROP_LOOP_POS "ses-fc-loop-position" /* U64 */ 108 #define SES_FC_PROP_REQ_HARDADDR "ses-fc-requested-hard-address" 109 #define SES_FC_PROP_N_PORT_ID "ses-fc-n_port-identifier" /* U64 */ 110 #define SES_FC_PROP_N_PORT_NAME "ses-fc-n_port-name" /* U64 */ 111 #define SES_FC_PROP_PORTS "ses-fc-ports" /* NVA */ 112 113 #define SES_SAS_PROP_DEVICE_TYPE "ses-sas-device-type" /* U64 */ 114 /* 115 * SAS2r11 7.8.2 Table 123 116 */ 117 typedef enum sas_device_type { 118 SAS_DT_END_DEVICE = 0x01, 119 SAS_DT_EXPANDER = 0x02, 120 SAS_DT_LEGACY_EXPANDER = 0x3 121 } sas_device_type_t; 122 123 #define SES_SAS_PROP_SMPI_PORT "ses-sas-smp-initiator-port" 124 #define SES_SAS_PROP_STPI_PORT "ses-sas-stp-initiator-port" 125 #define SES_SAS_PROP_SSPI_PORT "ses-sas-ssp-initiator-port" 126 #define SES_SAS_PROP_SATA_DEVICE "ses-sas-sata-device" 127 #define SES_SAS_PROP_SMPT_PORT "ses-sas-smp-target-port" 128 #define SES_SAS_PROP_STPT_PORT "ses-sas-stp-target-port" 129 #define SES_SAS_PROP_SSPT_PORT "ses-sas-ssp-target-port" 130 #define SES_SAS_PROP_ATT_ADDR "ses-sas-attached-address" /* U64 */ 131 #define SES_SAS_PROP_ADDR "ses-sas-address" /* U64 */ 132 #define SES_SAS_PROP_PHY_ID "ses-sas-phy-identifier" /* U64 */ 133 #define SES_SAS_PROP_PHYS "ses-sas-phys" /* NVA */ 134 #define SES_PROP_CE_IDX "ses-connector-element-index" /* U64 */ 135 #define SES_PROP_OE_IDX "ses-other-element-index" /* U64 */ 136 137 #define SES_PROP_THRESH_CRIT_HI "ses-high-critical-threshold" /* U64 */ 138 #define SES_PROP_THRESH_WARN_HI "ses-high-warning-threshold" /* U64 */ 139 #define SES_PROP_THRESH_CRIT_LO "ses-low-critical-threshold" /* U64 */ 140 #define SES_PROP_THRESH_WARN_LO "ses-low-warning-threshold" /* U64 */ 141 142 /* 143 * Audible Alarm properties 144 */ 145 #define SES_ALARM_PROP_UNRECOV "ses-indicating-unrecoverable" 146 #define SES_ALARM_PROP_CRIT "ses-indicating-critical" 147 #define SES_ALARM_PROP_NONCRIT "ses-indicating-noncritical" 148 #define SES_ALARM_PROP_INFO "ses-indicating-informational" 149 #define SES_ALARM_PROP_REMIND "ses-reminder-mode" 150 #define SES_ALARM_PROP_MUTED "ses-muted" 151 #define SES_ALARM_PROP_RQST_MUTE "ses-mute-requested" 152 153 /* 154 * Nonvolatile Cache properties 155 */ 156 #define SES_CACHE_PROP_SIZE "ses-cache-size" /* U64 */ 157 158 /* 159 * Cooling Element properties 160 */ 161 #define SES_COOLING_PROP_FAN_SPEED "ses-fan-speed" /* U64 */ 162 #define SES_COOLING_PROP_SPEED_CODE "ses-fan-speed-code" /* U64 */ 163 typedef enum ses_cooling_fan_speed { 164 SES_COOLING_FAN_SPEED_STOPPED = 0, 165 SES_COOLING_FAN_SPEED_LOWEST = 1, 166 SES_COOLING_FAN_SPEED_LOWER = 2, 167 SES_COOLING_FAN_SPEED_LOW = 3, 168 SES_COOLING_FAN_SPEED_INTERMEDIATE = 4, 169 SES_COOLING_FAN_SPEED_HIGH = 5, 170 SES_COOLING_FAN_SPEED_HIGHER = 6, 171 SES_COOLING_FAN_SPEED_HIGHEST = 7 172 } ses_cooling_fan_speed_t; 173 174 /* 175 * Device/Array Device properties 176 */ 177 #define SES_DEV_PROP_SLOT_ADDR "ses-slot-address" /* U64 */ 178 #define SES_DEV_PROP_PRDFAIL "ses-failure-predicted" 179 #define SES_DEV_PROP_READY_TO_INSERT "ses-ready-to-insert" 180 #define SES_DEV_PROP_ENC_BYP_A "ses-enclosure-bypassed-a" 181 #define SES_DEV_PROP_ENC_BYP_B "ses-enclosure-bypassed-b" 182 #define SES_DEV_PROP_DO_NOT_REMOVE "ses-do-not-remove" 183 #define SES_DEV_PROP_APP_BYP_A "ses-app-client-bypassed-a" 184 #define SES_DEV_PROP_APP_BYP_B "ses-app-client-bypassed-b" 185 #define SES_DEV_PROP_DEV_BYP_A "ses-device-bypassed-a" 186 #define SES_DEV_PROP_DEV_BYP_B "ses-device-bypassed-b" 187 #define SES_DEV_PROP_BYP_A "ses-bypassed-a" 188 #define SES_DEV_PROP_BYP_B "ses-bypassed-b" 189 #define SES_DEV_PROP_FAULT_RQSTD "ses-fault-requested" 190 #define SES_DEV_PROP_FAULT_SENSED "ses-fault-sensed" 191 #define SES_DEV_PROP_SAS_NOT_ALL_PHYS "ses-sas-not-all-phys" 192 193 /* Control only */ 194 #define SES_DEV_PROP_REQ_MISSING "ses-request-missing" 195 #define SES_DEV_PROP_REQ_ACTIVE "ses-request-activity" 196 197 #define SES_AD_PROP_RR_ABORT "ses-remap-rebuild-abort" 198 #define SES_AD_PROP_REBUILD "ses-remap-rebuild" 199 #define SES_AD_PROP_IN_FAILED_ARRAY "ses-in-failed-array" 200 #define SES_AD_PROP_IN_CRIT_ARRAY "ses-in-critical-array" 201 #define SES_AD_PROP_CONS_CHK "ses-consistency-check" 202 #define SES_AD_PROP_HOT_SPARE "ses-hot-spare" 203 #define SES_AD_PROP_RSVD_DEVICE "ses-reserved-device" 204 #define SES_AD_PROP_OK "ses-ok" 205 206 /* 207 * Display Element properties 208 */ 209 #define SES_DPY_PROP_CHAR "ses-displayed-character" /* U16 */ 210 #define SES_DPY_PROP_MODE "ses-display-mode" /* U64 */ 211 /* 212 * SES-2r17 Table 96, 7.3.14 213 */ 214 typedef enum ses_display_mode_ctl { 215 SES_DISPLAY_MC_NOCHG = 0, 216 SES_DISPLAY_MC_ESP = 1, 217 SES_DISPLAY_MC_SET = 2 218 } ses_display_mode_ctl_t; 219 220 typedef enum ses2_display_mode_status { 221 SES_DISPLAY_MS_NOTSUP = 0, 222 SES_DISPLAY_MS_ESP = 1, 223 SES_DISPLAY_MS_SET = 2 224 } ses_display_mode_status_t; 225 226 /* 227 * Current Sensor properties 228 */ 229 #define SES_CS_PROP_CURRENT_MA "ses-current" /* I64 */ 230 231 /* 232 * Door Lock properties 233 */ 234 #define SES_LOCK_PROP_UNLOCKED "ses-unlocked" 235 236 /* 237 * SCSI Initiator or Target Port properties 238 */ 239 #define SES_ITP_PROP_ENABLED "ses-enabled" 240 241 /* 242 * Language Module properties 243 */ 244 #define SES_LANG_PROP_LANGCODE "ses-language-code" /* U64 */ 245 246 /* 247 * SCSI Port/Transceiver properties 248 */ 249 #define SES_PX_PROP_XMIT_FAIL "ses-transmitter-failure" 250 #define SES_PX_PROP_LOL "ses-loss-of-link" 251 252 /* 253 * Power Supply properties 254 */ 255 #define SES_PSU_PROP_DC_OVER_CURRENT "ses-dc-over-current" 256 #define SES_PSU_PROP_DC_UNDER_VOLTAGE "ses-dc-under-voltage" 257 #define SES_PSU_PROP_DC_OVER_VOLTAGE "ses-dc-over-voltage" 258 #define SES_PSU_PROP_DC_FAIL "ses-dc-fail" 259 #define SES_PSU_PROP_AC_FAIL "ses-ac-fail" 260 #define SES_PSU_PROP_TEMP_WARN "ses-temperature-warning" /* I64 */ 261 #define SES_PSU_PROP_OVERTEMP_FAIL "ses-overtemperature-failure" 262 263 /* 264 * SAS Expander properties 265 */ 266 #define SES_EXP_PROP_SAS_ADDR "ses-expander-sas-address" /* U64 */ 267 268 /* 269 * SAS Connector properties 270 */ 271 #define SES_SC_PROP_PHYSICAL_LINK "ses-sas-physical-link" /* U64 */ 272 #define SES_SC_PROP_CONNECTOR_TYPE "ses-sas-connector-type" /* U64 */ 273 /* 274 * SES2r17 Table 122, 7.3.26 275 */ 276 typedef enum ses_sasconn_type { 277 SES_SASCONN_T_UNKNOWN = 0, 278 SES_SASCONN_T_SFF_8470 = 0x1, 279 SES_SASCONN_T_SFF_8088 = 0x2, 280 SES_SASCONN_T_VENDOR_EXT = 0xf, 281 SES_SASCONN_T_SFF_8484 = 0x10, 282 SES_SASCONN_T_SFF_8087 = 0x11, 283 SES_SASCONN_T_SFF_8482_R = 0x20, 284 SES_SASCONN_T_SATA_HOST = 0x21, 285 SES_SASCONN_T_SFF_8482_P = 0x22, 286 SES_SASCONN_T_SATA_DEV = 0x23, 287 SES_SASCONN_T_VIRTUAL = 0x2f, 288 SES_SASCONN_T_VENDOR_INT = 0x3f, 289 SES_SASCONN_T_VENDOR_70 = 0x70, 290 SES_SASCONN_T_VENDOR_71 = 0x71, 291 SES_SASCONN_T_VENDOR_72 = 0x72, 292 SES_SASCONN_T_VENDOR_73 = 0x73, 293 SES_SASCONN_T_VENDOR_74 = 0x74, 294 SES_SASCONN_T_VENDOR_75 = 0x75, 295 SES_SASCONN_T_VENDOR_76 = 0x76, 296 SES_SASCONN_T_VENDOR_77 = 0x77, 297 SES_SASCONN_T_VENDOR_78 = 0x78, 298 SES_SASCONN_T_VENDOR_79 = 0x79, 299 SES_SASCONN_T_VENDOR_7A = 0x7a, 300 SES_SASCONN_T_VENDOR_7B = 0x7b, 301 SES_SASCONN_T_VENDOR_7C = 0x7c, 302 SES_SASCONN_T_VENDOR_7D = 0x7d, 303 SES_SASCONN_T_VENDOR_7E = 0x7e, 304 SES_SASCONN_T_VENDOR_7F = 0x7f 305 } ses_sasconn_type_t; 306 307 /* 308 * Simple Subenclosure properties 309 */ 310 #define SES_SS_PROP_SHORT_STATUS "ses-short-status" /* U64 */ 311 312 /* 313 * Temperature Sensor properties 314 */ 315 #define SES_TEMP_PROP_TEMP "ses-temperature" /* I64 */ 316 317 /* 318 * Uninterruptible Power Supply properties 319 */ 320 #define SES_UPS_PROP_TIMELEFT "ses-battery-time-remaining" /* U64 */ 321 #define SES_UPS_PROP_INTF_FAIL "ses-interface-failure" 322 #define SES_UPS_PROP_WARN "ses-low-battery-warning" 323 #define SES_UPS_PROP_UPS_FAIL "ses-ups-failure" 324 #define SES_UPS_PROP_DC_FAIL "ses-dc-failure" 325 #define SES_UPS_PROP_AC_FAIL "ses-ac-failure" 326 #define SES_UPS_PROP_AC_QUAL "ses-ac-quality-exception" 327 #define SES_UPS_PROP_AC_HI "ses-ac-overvoltage-exception" 328 #define SES_UPS_PROP_AC_LO "ses-ac-undervoltage-exception" 329 #define SES_UPS_PROP_BPF "ses-battery-failure-predicted" 330 #define SES_UPS_PROP_BATT_FAIL "ses-battery-failure" 331 332 /* 333 * Voltage Sensor properties 334 */ 335 #define SES_VS_PROP_VOLTAGE_MV "ses-voltage" /* I64 */ 336 337 /* 338 * Enclosure Services Controller properties (Control only) 339 */ 340 #define SES_ESC_PROP_SELECT "ses-select-element" 341 342 /* 343 * Primary/Subenclosure properties 344 */ 345 #define SES_EN_PROP_EID "ses-enclosure-id" /* U64 */ 346 #define SES_EN_PROP_ESPID "ses-enclosure-service-proc-id" 347 #define SES_EN_PROP_NESP "ses-enclosure-service-proc-count" 348 #define SES_EN_PROP_LID "ses-logical-id" /* NV */ 349 #define SES_EN_PROP_VID "ses-vendor-id" /* S */ 350 #define SES_EN_PROP_PID "ses-product-id" /* S */ 351 #define SES_EN_PROP_REV "ses-product-revision" /* S */ 352 #define SES_EN_PROP_VS "ses-product-vendor-specific" /* BA */ 353 354 #define SES_EN_PROP_UNRECOV "ses-status-unrecoverable" 355 #define SES_EN_PROP_CRIT "ses-status-critical" 356 #define SES_EN_PROP_NONCRIT "ses-status-noncritical" 357 #define SES_EN_PROP_INFO "ses-status-informational" 358 #define SES_EN_PROP_INVOP "ses-status-invalid-operation" 359 #define SES_EN_PROP_HELP "ses-help-text" /* S */ 360 #define SES_EN_PROP_STRING "ses-string-in-data" /* BA */ 361 #define SES_EN_PROP_SHORT "ses-short-status" /* U64 */ 362 #define SES_EN_PROP_UCODE "ses-microcode-dl-status" /* U64 */ 363 typedef enum ses2_dl_ucode_status { 364 SES2_DLUCODE_S_NOP = 0, 365 SES2_DLUCODE_S_INPROGRESS = 0x1, 366 SES2_DLUCODE_S_SAVING = 0x2, 367 SES2_DLUCODE_S_INTERIM_3 = 0x3, 368 SES2_DLUCODE_S_INTERIM_4 = 0x4, 369 SES2_DLUCODE_S_INTERIM_5 = 0x5, 370 SES2_DLUCODE_S_INTERIM_6 = 0x6, 371 SES2_DLUCODE_S_INTERIM_7 = 0x7, 372 SES2_DLUCODE_S_INTERIM_8 = 0x8, 373 SES2_DLUCODE_S_INTERIM_9 = 0x9, 374 SES2_DLUCODE_S_INTERIM_A = 0xa, 375 SES2_DLUCODE_S_INTERIM_B = 0xb, 376 SES2_DLUCODE_S_INTERIM_C = 0xc, 377 SES2_DLUCODE_S_INTERIM_D = 0xd, 378 SES2_DLUCODE_S_INTERIM_E = 0xe, 379 SES2_DLUCODE_S_INTERIM_F = 0xf, 380 SES2_DLUCODE_S_COMPLETE_NOW = 0x10, 381 SES2_DLUCODE_S_COMPLETE_AT_RESET = 0x11, 382 SES2_DLUCODE_S_COMPLETE_AT_POWERON = 0x12, 383 SES2_DLUCODE_S_VENDOR_70 = 0x70, 384 SES2_DLUCODE_S_VENDOR_71 = 0x71, 385 SES2_DLUCODE_S_VENDOR_72 = 0x72, 386 SES2_DLUCODE_S_VENDOR_73 = 0x73, 387 SES2_DLUCODE_S_VENDOR_74 = 0x74, 388 SES2_DLUCODE_S_VENDOR_75 = 0x75, 389 SES2_DLUCODE_S_VENDOR_76 = 0x76, 390 SES2_DLUCODE_S_VENDOR_77 = 0x77, 391 SES2_DLUCODE_S_VENDOR_78 = 0x78, 392 SES2_DLUCODE_S_VENDOR_79 = 0x79, 393 SES2_DLUCODE_S_VENDOR_7A = 0x7a, 394 SES2_DLUCODE_S_VENDOR_7B = 0x7b, 395 SES2_DLUCODE_S_VENDOR_7C = 0x7c, 396 SES2_DLUCODE_S_VENDOR_7D = 0x7d, 397 SES2_DLUCODE_S_VENDOR_7E = 0x7e, 398 SES2_DLUCODE_S_VENDOR_7F = 0x7f, 399 SES2_DLUCODE_S_PAGE_ERR = 0x80, 400 SES2_DLUCODE_S_IMAGE_ERR = 0x81, 401 SES2_DLUCODE_S_TIMEOUT = 0x82, 402 SES2_DLUCODE_S_INTERNAL_NEEDIMAGE = 0x83, 403 SES2_DLUCODE_S_INTERNAL_SAFE = 0x84, 404 SES2_DLUCODE_S_VENDOR_ERR_F0 = 0xf0, 405 SES2_DLUCODE_S_VENDOR_ERR_F1 = 0xf1, 406 SES2_DLUCODE_S_VENDOR_ERR_F2 = 0xf2, 407 SES2_DLUCODE_S_VENDOR_ERR_F3 = 0xf3, 408 SES2_DLUCODE_S_VENDOR_ERR_F4 = 0xf4, 409 SES2_DLUCODE_S_VENDOR_ERR_F5 = 0xf5, 410 SES2_DLUCODE_S_VENDOR_ERR_F6 = 0xf6, 411 SES2_DLUCODE_S_VENDOR_ERR_F7 = 0xf7, 412 SES2_DLUCODE_S_VENDOR_ERR_F8 = 0xf8, 413 SES2_DLUCODE_S_VENDOR_ERR_F9 = 0xf9, 414 SES2_DLUCODE_S_VENDOR_ERR_FA = 0xfa, 415 SES2_DLUCODE_S_VENDOR_ERR_FB = 0xfb, 416 SES2_DLUCODE_S_VENDOR_ERR_FC = 0xfc, 417 SES2_DLUCODE_S_VENDOR_ERR_FD = 0xfd, 418 SES2_DLUCODE_S_VENDOR_ERR_FE = 0xfe, 419 SES2_DLUCODE_S_VENDOR_ERR_FF = 0xff 420 } ses2_dl_ucode_status_t; 421 422 typedef enum ses_dl_ucode_mode { 423 SES_DLUCODE_M_WITH_OFFS = 6, 424 SES_DLUCODE_M_WITH_OFFS_SAVE = 7 425 } ses_dl_ucode_mode_t; 426 427 #define SES_EN_PROP_UCODE_A "ses-microcode-dl-addl-status" /* U64 */ 428 #define SES_EN_PROP_UCODE_SZ "ses-microcode-maximum-size" /* U64 */ 429 #define SES_EN_PROP_UCODE_BUF "ses-microcode-buffer-id" /* U64 */ 430 #define SES_EN_PROP_UCODE_OFF "ses-microcode-buffer-offset" /* U64 */ 431 432 #define SES_EN_PROP_NICK "ses-nickname" /* S */ 433 #define SES_EN_PROP_NICK_STATUS "ses-nickname-status" /* U64 */ 434 typedef enum ses_subnick_status { 435 SES_SNS_NO_ERROR = 0x0, 436 SES_SNS_ERR_PAGE = 0x80, 437 SES_SNS_ERR_INT_NICKLOST = 0x81, 438 SES_SNS_ERR_INT_PRESERVED = 0x82 439 } ses_subnick_status_t; 440 441 #define SES_EN_PROP_NICK_ADDL_STATUS "ses-nickname-additional-status" 442 #define SES_EN_PROP_NICK_LANG "ses-nickname-language" /* U64 */ 443 444 #define SES_EN_PROP_POWER_DELAY "ses-power-cycle-delay" /* U64 */ 445 #define SES_EN_PROP_POWER_DURATION "ses-power-cycle-duration" /* U64 */ 446 #define SES_EN_PROP_POWER_REQUEST "ses-power-cycle-request" /* U64 */ 447 448 typedef enum ses_power_delay { 449 SES_PDL_NONE = 0x0, 450 SES_PDL_IMMEDIATE = 0x3f 451 } ses_power_delay_t; 452 453 typedef enum ses_power_duration { 454 SES_PDR_NONE = 0x0, 455 SES_PDR_MANUAL = 0x3f 456 } ses_power_duration_t; 457 458 typedef enum ses_power_request { 459 SES_PRQ_NONE = 0x0, 460 SES_PRQ_SET = 0x1, 461 SES_PRQ_CANCEL = 0x2 462 } ses_power_request_t; 463 464 /* 465 * IEEE logical IDs (for SES_EN_PROP_LID) 466 */ 467 #define SPC3_NAA_INT "naa-id-integer" /* U64 */ 468 #define SPC3_NAA_ID_TYPE "naa-id-type" /* U64 */ 469 #define SPC3_NAA_COMPANY_ID "naa-company-id" /* U64 */ 470 #define SPC3_NAA_VS_A "naa-vendor-specific-a" /* U64 */ 471 #define SPC3_NAA_VS_B "naa-vendor-specific-b" /* U64 */ 472 473 /* 474 * SES-2 Diagnostic page codes (Table 5, 6.1.1). The set of exported pages 475 * constitutes an inter-plugin interface and is therefore part of the public 476 * header file. 477 */ 478 typedef enum ses2_diag_page { 479 SES2_DIAGPAGE_SUPPORTED_PAGES = 0x00, 480 SES2_DIAGPAGE_CONFIG = 0x01, 481 SES2_DIAGPAGE_ENCLOSURE_CTL_STATUS = 0x02, 482 SES2_DIAGPAGE_HELP_TEXT = 0x03, 483 SES2_DIAGPAGE_STRING_IO = 0x04, 484 SES2_DIAGPAGE_THRESHOLD_IO = 0x05, 485 SES2_DIAGPAGE_ELEMENT_DESC = 0x07, 486 SES2_DIAGPAGE_SHORT_STATUS = 0x08, 487 SES2_DIAGPAGE_ENCLOSURE_BUSY = 0x09, 488 SES2_DIAGPAGE_ADDL_ELEM_STATUS = 0x0a, 489 SES2_DIAGPAGE_SUBENCLOSURE_HELP_TEXT = 0x0b, 490 SES2_DIAGPAGE_SUBENCLOSURE_STRING_IO = 0x0c, 491 SES2_DIAGPAGE_SUPPORTED_SES_PAGES = 0x0d, 492 SES2_DIAGPAGE_DL_MICROCODE_CTL_STATUS = 0x0e, 493 SES2_DIAGPAGE_SUBENCLOSURE_NICKNAME_CTL_STATUS = 0x0f, 494 SES2_DIAGPAGE_VENDOR_0 = 0x10, 495 SES2_DIAGPAGE_VENDOR_1 = 0x11, 496 SES2_DIAGPAGE_VENDOR_2 = 0x12, 497 SES2_DIAGPAGE_VENDOR_3 = 0x13, 498 SES2_DIAGPAGE_VENDOR_4 = 0x14, 499 SES2_DIAGPAGE_VENDOR_5 = 0x15, 500 SES2_DIAGPAGE_VENDOR_6 = 0x16, 501 SES2_DIAGPAGE_VENDOR_7 = 0x17, 502 SES2_DIAGPAGE_VENDOR_8 = 0x18, 503 SES2_DIAGPAGE_VENDOR_9 = 0x19, 504 SES2_DIAGPAGE_VENDOR_A = 0x1a, 505 SES2_DIAGPAGE_VENDOR_B = 0x1b, 506 SES2_DIAGPAGE_VENDOR_C = 0x1c, 507 SES2_DIAGPAGE_VENDOR_D = 0x1d, 508 SES2_DIAGPAGE_VENDOR_E = 0x1e, 509 SES2_DIAGPAGE_VENDOR_F = 0x1f 510 } ses2_diag_page_t; 511 512 #define SES_CTL_OP_SETPROP "ses-ctl-setprop" 513 #define SES_CTL_OP_DL_UCODE "ses-ctl-dl-ucode" 514 515 #define SES_CTL_PROP_UCODE_DATA "ses-ctl-ucode-data" 516 #define SES_CTL_PROP_UCODE_BUFID "ses-ctl-ucode-bufid" 517 #define SES_CTL_PROP_UCODE_MODE "ses-ctl-ucode-mode" 518 519 #ifdef __cplusplus 520 } 521 #endif 522 523 #endif /* _FRAMEWORK_SES_H */ 524