1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * db_table.cc 24 * 25 * Copyright 2004 Sun Microsystems, Inc. All rights reserved. 26 * Use is subject to license terms. 27 * 28 * Copyright 2015 RackTop Systems. 29 * Copyright (c) 2016 by Delphix. All rights reserved. 30 */ 31 32 #include <stdio.h> 33 #include <malloc.h> 34 #include <string.h> 35 #include <stdlib.h> /* srand48() */ 36 #include <lber.h> 37 #include <ldap.h> 38 #include "db_headers.h" 39 #include "db_table.h" 40 #include "db_pickle.h" /* for dump and load */ 41 #include "db_entry.h" 42 #include "nisdb_mt.h" 43 44 #include "ldap_parse.h" 45 #include "ldap_util.h" 46 #include "ldap_map.h" 47 #include "ldap_xdr.h" 48 #include "nis_hashitem.h" 49 #include "nisdb_ldap.h" 50 #include "nis_parse_ldap_conf.h" 51 52 static time_t maxTimeT; 53 54 /* 55 * Find the largest (positive) value of time_t. 56 * 57 * If time_t is unsigned, the largest possible value is just ~0. 58 * However, if it's signed, then ~0 is negative. Since lint (for 59 * sure), and perhaps the compiler too, dislike comparing an 60 * unsigned quantity to see if it's less than zero, we compare 61 * to one instead. If negative, the largest possible value is 62 * th inverse of 2**(N-1), where N is the number of bits in a 63 * time_t. 64 */ 65 extern "C" { 66 static void 67 __setMaxTimeT(void) 68 { 69 unsigned char b[sizeof (time_t)]; 70 int i; 71 72 /* Compute ~0 for an unknown length integer */ 73 for (i = 0; i < sizeof (time_t); i++) { 74 b[i] = 0xff; 75 } 76 /* Set maxTimeT to ~0 of appropriate length */ 77 (void) memcpy(&maxTimeT, b, sizeof (time_t)); 78 79 if (maxTimeT < 1) 80 maxTimeT = ~(1L<<((8*sizeof (maxTimeT))-1)); 81 } 82 #pragma init(__setMaxTimeT) 83 } 84 85 /* How much to grow table by */ 86 #define DB_TABLE_GROWTH_INCREMENT 1024 87 88 /* 0'th not used; might be confusing. */ 89 #define DB_TABLE_START 1 90 91 /* prevents wrap around numbers from being passed */ 92 #define CALLOC_LIMIT 536870911 93 94 /* Initial table sizes to use before using 1K increments. */ 95 /* This helps conserve memory usage when there are lots of small tables. */ 96 static int tabsizes[] = { 97 16, 98 128, 99 512, 100 DB_TABLE_GROWTH_INCREMENT, 101 0 102 }; 103 104 /* Returns the next size to use for table */ 105 static long unsigned 106 get_new_table_size(long unsigned oldsize) 107 { 108 long unsigned newsize = 0, n; 109 if (oldsize == 0) 110 newsize = tabsizes[0]; 111 else { 112 for (n = 0; newsize = tabsizes[n++]; ) 113 if (oldsize == newsize) { 114 newsize = tabsizes[n]; /* get next size */ 115 break; 116 } 117 if (newsize == 0) 118 newsize = oldsize + DB_TABLE_GROWTH_INCREMENT; 119 } 120 return (newsize); 121 } 122 123 124 /* destructor */ 125 db_free_list::~db_free_list() 126 { 127 WRITELOCKV(this, "w db_free_list::~db_free_list"); 128 reset(); /* free list entries */ 129 DESTROYRW(free_list); 130 } 131 132 void 133 db_free_list::reset() 134 { 135 db_free_entry *current, *nextentry; 136 137 WRITELOCKV(this, "w db_free_list::reset"); 138 for (current = head; current != NULL; ) { 139 nextentry = current->next; 140 delete current; 141 current = nextentry; 142 } 143 head = NULL; 144 count = 0; 145 WRITEUNLOCKV(this, "wu db_free_list::reset"); 146 } 147 148 /* Returns the location of a free entry, or NULL, if there aren't any. */ 149 entryp 150 db_free_list::pop() 151 { 152 WRITELOCK(this, NULL, "w db_free_list::pop"); 153 if (head == NULL) { 154 WRITEUNLOCK(this, NULL, "wu db_free_list::pop"); 155 return (NULL); 156 } 157 db_free_entry* old_head = head; 158 entryp found = head->where; 159 head = head->next; 160 delete old_head; 161 --count; 162 WRITEUNLOCK(this, found, "wu db_free_list::pop"); 163 return (found); 164 } 165 166 /* 167 * Adds given location to the free list. 168 * Returns TRUE if successful, FALSE otherwise (when out of memory). 169 */ 170 bool_t 171 db_free_list::push(entryp tabloc) 172 { 173 db_free_entry * newentry = new db_free_entry; 174 175 WRITELOCK(this, FALSE, "w db_free_list::push"); 176 if (newentry == NULL) { 177 WRITEUNLOCK(this, FALSE, "wu db_free_list::push"); 178 FATAL3("db_free_list::push: cannot allocation space", 179 DB_MEMORY_LIMIT, FALSE); 180 } 181 newentry->where = tabloc; 182 newentry->next = head; 183 head = newentry; 184 ++count; 185 WRITEUNLOCK(this, TRUE, "wu db_free_list::push"); 186 return (TRUE); 187 } 188 189 /* 190 * Returns in a vector the information in the free list. 191 * Vector returned is of form: [n free cells][n1][n2][loc1], ..[locn]. 192 * Leave the first 'n' cells free. 193 * n1 is the number of entries that should be in the freelist. 194 * n2 is the number of entries actually found in the freelist. 195 * [loc1...locn] are the entries. n2 <= n1 because we never count beyond n1. 196 * It is up to the caller to free the returned vector when it is through. 197 */ 198 long * 199 db_free_list::stats(int nslots) 200 { 201 long realcount = 0, 202 i, 203 liststart = nslots, // start of freelist 204 listend = nslots+count+2; // end of freelist 205 db_free_entry_p current = head; 206 207 READLOCK(this, NULL, "r db_free_list::stats"); 208 209 long *answer = (long *)malloc((int)(listend)*sizeof (long)); 210 if (answer == 0) { 211 READUNLOCK(this, NULL, "ru db_free_list::stats"); 212 FATAL3("db_free_list::stats: cannot allocation space", 213 DB_MEMORY_LIMIT, NULL); 214 } 215 216 answer[liststart] = count; /* size of freelist */ 217 218 for (i = liststart+2; i < listend && current != NULL; i++) { 219 answer[i] = current->where; 220 current = current->next; 221 ++realcount; 222 } 223 224 answer[liststart+1] = realcount; 225 READUNLOCK(this, answer, "ru db_free_list::stats"); 226 return (answer); 227 } 228 229 230 /* Set default values for the mapping structure */ 231 void 232 db_table::initMappingStruct(__nisdb_table_mapping_t *m) { 233 if (m == 0) 234 return; 235 236 m->initTtlLo = (ldapDBTableMapping.initTtlLo > 0) ? 237 ldapDBTableMapping.initTtlLo : (3600-1800); 238 m->initTtlHi = (ldapDBTableMapping.initTtlHi > 0) ? 239 ldapDBTableMapping.initTtlHi : (3600+1800); 240 m->ttl = (ldapDBTableMapping.ttl > 0) ? 241 ldapDBTableMapping.ttl : 3600; 242 m->enumExpire = 0; 243 m->fromLDAP = FALSE; 244 m->toLDAP = FALSE; 245 m->isMaster = FALSE; 246 m->retrieveError = ldapDBTableMapping.retrieveError; 247 m->retrieveErrorRetry.attempts = 248 ldapDBTableMapping.retrieveErrorRetry.attempts; 249 m->retrieveErrorRetry.timeout = 250 ldapDBTableMapping.retrieveErrorRetry.timeout; 251 m->storeError = ldapDBTableMapping.storeError; 252 m->storeErrorRetry.attempts = 253 ldapDBTableMapping.storeErrorRetry.attempts; 254 m->storeErrorRetry.timeout = 255 ldapDBTableMapping.storeErrorRetry.timeout; 256 m->storeErrorDisp = ldapDBTableMapping.storeErrorDisp; 257 m->refreshError = ldapDBTableMapping.refreshError; 258 m->refreshErrorRetry.attempts = 259 ldapDBTableMapping.refreshErrorRetry.attempts; 260 m->refreshErrorRetry.timeout = 261 ldapDBTableMapping.refreshErrorRetry.timeout; 262 m->matchFetch = ldapDBTableMapping.matchFetch; 263 264 if (mapping.expire != 0) 265 free(mapping.expire); 266 m->expire = 0; 267 268 if (m->tm != 0) 269 free(m->tm); 270 m->tm = 0; 271 272 /* 273 * The 'objType' field obviously indicates the type of object. 274 * However, we also use it to tell us if we've retrieved mapping 275 * data from LDAP or not; in the latter case, 'objType' is 276 * NIS_BOGUS_OBJ. For purposes of maintaining expiration times, 277 * we may need to know if the object is a table or a directory 278 * _before_ we've retrieved any mapping data. Hence the 'expireType' 279 * field, which starts as NIS_BOGUS_OBJ (meaning, don't know, assume 280 * directory for now), and later is set to NIS_DIRECTORY_OBJ 281 * (always keep expiration data, in case one of the dir entries 282 * is mapped) or NIS_TABLE_OBJ (only need expiration data if 283 * tha table is mapped). 284 */ 285 m->objType = NIS_BOGUS_OBJ; 286 m->expireType = NIS_BOGUS_OBJ; 287 if (m->objName != 0) 288 free(m->objName); 289 m->objName = 0; 290 } 291 292 void 293 db_table::db_table_ldap_init(void) { 294 295 INITRW(table); 296 297 enumMode.flag = 0; 298 enumCount.flag = 0; 299 enumIndex.ptr = 0; 300 enumArray.ptr = 0; 301 302 mapping.expire = 0; 303 mapping.tm = 0; 304 mapping.objName = 0; 305 mapping.isDeferredTable = FALSE; 306 (void) mutex_init(&mapping.enumLock, 0, 0); 307 mapping.enumTid = 0; 308 mapping.enumStat = -1; 309 mapping.enumDeferred = 0; 310 mapping.enumEntries = 0; 311 mapping.enumTime = 0; 312 } 313 314 /* db_table constructor */ 315 db_table::db_table() : freelist() 316 { 317 tab = NULL; 318 table_size = 0; 319 last_used = 0; 320 count = 0; 321 322 db_table_ldap_init(); 323 initMappingStruct(&mapping); 324 325 /* grow(); */ 326 } 327 328 /* 329 * db_table destructor: 330 * 1. Get rid of contents of freelist 331 * 2. delete all entries hanging off table 332 * 3. get rid of table itself 333 */ 334 db_table::~db_table() 335 { 336 WRITELOCKV(this, "w db_table::~db_table"); 337 reset(); 338 DESTROYRW(table); 339 } 340 341 /* reset size and pointers */ 342 void 343 db_table::reset() 344 { 345 int i, done = 0; 346 347 WRITELOCKV(this, "w db_table::reset"); 348 freelist.reset(); 349 350 /* Add sanity check in case of table corruption */ 351 if (tab != NULL) { 352 for (i = 0; 353 i <= last_used && i < table_size && done < count; 354 i++) { 355 if (tab[i]) { 356 free_entry(tab[i]); 357 ++done; 358 } 359 } 360 } 361 362 delete tab; 363 table_size = last_used = count = 0; 364 tab = NULL; 365 sfree(mapping.expire); 366 mapping.expire = NULL; 367 mapping.objType = NIS_BOGUS_OBJ; 368 mapping.expireType = NIS_BOGUS_OBJ; 369 sfree(mapping.objName); 370 mapping.objName = 0; 371 /* Leave other values of the mapping structure unchanged */ 372 enumMode.flag = 0; 373 enumCount.flag = 0; 374 sfree(enumIndex.ptr); 375 enumIndex.ptr = 0; 376 sfree(enumArray.ptr); 377 enumArray.ptr = 0; 378 WRITEUNLOCKV(this, "wu db_table::reset"); 379 } 380 381 db_status 382 db_table::allocateExpire(long oldSize, long newSize) { 383 time_t *newExpire; 384 385 newExpire = (time_t *)realloc(mapping.expire, 386 newSize * sizeof (mapping.expire[0])); 387 if (newExpire != NULL) { 388 /* Initialize new portion */ 389 (void) memset(&newExpire[oldSize], 0, 390 (newSize-oldSize) * sizeof (newExpire[0])); 391 mapping.expire = newExpire; 392 } else { 393 return (DB_MEMORY_LIMIT); 394 } 395 396 return (DB_SUCCESS); 397 } 398 399 db_status 400 db_table::allocateEnumArray(long oldSize, long newSize) { 401 entry_object **newEnumArray; 402 const char *myself = "db_table::allocateEnumArray"; 403 404 if (enumCount.flag > 0) { 405 if (enumIndex.ptr == 0) { 406 enumIndex.ptr = (entryp *)am(myself, enumCount.flag * 407 sizeof (entryp)); 408 if (enumIndex.ptr == 0) 409 return (DB_MEMORY_LIMIT); 410 } 411 oldSize = 0; 412 newSize = enumCount.flag; 413 } 414 newEnumArray = (entry_object **)realloc(enumArray.ptr, 415 newSize * sizeof (entry_object *)); 416 if (newEnumArray != 0 && newSize > oldSize) { 417 (void) memcpy(&newEnumArray[oldSize], &tab[oldSize], 418 (newSize-oldSize) * sizeof (entry_object *)); 419 enumArray.ptr = newEnumArray; 420 } else if (newEnumArray == 0) { 421 return (DB_MEMORY_LIMIT); 422 } 423 424 return (DB_SUCCESS); 425 } 426 427 /* Expand the table. Fatal error if insufficient memory. */ 428 void 429 db_table::grow() 430 { 431 WRITELOCKV(this, "w db_table::grow"); 432 long oldsize = table_size; 433 entry_object_p *oldtab = tab; 434 long i; 435 436 table_size = get_new_table_size(oldsize); 437 438 #ifdef DEBUG 439 fprintf(stderr, "db_table GROWING to %d\n", table_size); 440 #endif 441 442 if (table_size > CALLOC_LIMIT) { 443 table_size = oldsize; 444 WRITEUNLOCKV(this, "wu db_table::grow"); 445 FATAL("db_table::grow: table size exceeds calloc limit", 446 DB_MEMORY_LIMIT); 447 } 448 449 // if ((tab = new entry_object_p[table_size]) == NULL) 450 if ((tab = (entry_object_p*) 451 calloc((unsigned int) table_size, 452 sizeof (entry_object_p))) == NULL) { 453 tab = oldtab; // restore previous table info 454 table_size = oldsize; 455 WRITEUNLOCKV(this, "wu db_table::grow"); 456 FATAL("db_table::grow: cannot allocate space", DB_MEMORY_LIMIT); 457 } 458 459 /* 460 * For directories, we may need the expire time array even if the 461 * directory itself isn't mapped. If the objType and expireType both 462 * are bogus, we don't know yet if this is a table or a directory, 463 * and must proceed accordingly. 464 */ 465 if (mapping.objType == NIS_DIRECTORY_OBJ || 466 mapping.expireType != NIS_TABLE_OBJ || 467 mapping.fromLDAP) { 468 db_status stat = allocateExpire(oldsize, table_size); 469 if (stat != DB_SUCCESS) { 470 free(tab); 471 tab = oldtab; 472 table_size = oldsize; 473 WRITEUNLOCKV(this, "wu db_table::grow expire"); 474 FATAL( 475 "db_table::grow: cannot allocate space for expire", stat); 476 } 477 } 478 479 if (oldtab != NULL) { 480 for (i = 0; i < oldsize; i++) { // transfer old to new 481 tab[i] = oldtab[i]; 482 } 483 delete oldtab; 484 } 485 486 if (enumMode.flag) { 487 db_status stat = allocateEnumArray(oldsize, table_size); 488 if (stat != DB_SUCCESS) { 489 free(tab); 490 tab = oldtab; 491 table_size = oldsize; 492 WRITEUNLOCKV(this, "wu db_table::grow enumArray"); 493 FATAL( 494 "db_table::grow: cannot allocate space for enumArray", stat); 495 } 496 } 497 498 WRITEUNLOCKV(this, "wu db_table::grow"); 499 } 500 501 /* 502 * Return the first entry in table, also return its position in 503 * 'where'. Return NULL in both if no next entry is found. 504 */ 505 entry_object* 506 db_table::first_entry(entryp * where) 507 { 508 ASSERTRHELD(table); 509 if (count == 0 || tab == NULL) { /* empty table */ 510 *where = NULL; 511 return (NULL); 512 } else { 513 entryp i; 514 for (i = DB_TABLE_START; 515 i < table_size && i <= last_used; i++) { 516 if (tab[i] != NULL) { 517 *where = i; 518 return (tab[i]); 519 } 520 } 521 } 522 *where = NULL; 523 return (NULL); 524 } 525 526 /* 527 * Return the next entry in table from 'prev', also return its position in 528 * 'newentry'. Return NULL in both if no next entry is found. 529 */ 530 entry_object * 531 db_table::next_entry(entryp prev, entryp* newentry) 532 { 533 long i; 534 535 ASSERTRHELD(table); 536 if (prev >= table_size || tab == NULL || tab[prev] == NULL) 537 return (NULL); 538 for (i = prev+1; i < table_size && i <= last_used; i++) { 539 if (tab[i] != NULL) { 540 *newentry = i; 541 return (tab[i]); 542 } 543 } 544 *newentry = NULL; 545 return (NULL); 546 } 547 548 /* Return entry at location 'where', NULL if location is invalid. */ 549 entry_object * 550 db_table::get_entry(entryp where) 551 { 552 ASSERTRHELD(table); 553 if (where < table_size && tab != NULL && tab[where] != NULL) 554 return (tab[where]); 555 else 556 return (NULL); 557 } 558 559 void 560 db_table::setEntryExp(entryp where, entry_obj *obj, int initialLoad) { 561 nis_object *o; 562 const char *myself = "db_table::setEntryExp"; 563 564 /* 565 * If we don't know what type of object this is yet, we 566 * can find out now. If it's a directory, the pseudo-object 567 * in column zero will have the type "IN_DIRECTORY"; 568 * otherwise, it's a table object. 569 */ 570 if (mapping.expireType == NIS_BOGUS_OBJ) { 571 if (obj != 0) { 572 if (obj->en_type != 0 && 573 strcmp(obj->en_type, "IN_DIRECTORY") == 0) { 574 mapping.expireType = NIS_DIRECTORY_OBJ; 575 } else { 576 mapping.expireType = NIS_TABLE_OBJ; 577 if (!mapping.fromLDAP) { 578 free(mapping.expire); 579 mapping.expire = 0; 580 } 581 } 582 } 583 } 584 585 /* Set the entry TTL */ 586 if (mapping.expire != NULL) { 587 struct timeval now; 588 time_t lo, hi, ttl; 589 590 (void) gettimeofday(&now, NULL); 591 if (mapping.expireType == NIS_TABLE_OBJ) { 592 lo = mapping.initTtlLo; 593 hi = mapping.initTtlHi; 594 ttl = mapping.ttl; 595 /* TTL == 0 means always expired */ 596 if (ttl == 0) 597 ttl = -1; 598 } else { 599 __nis_table_mapping_t *t = 0; 600 601 o = unmakePseudoEntryObj(obj, 0); 602 if (o != 0) { 603 __nis_buffer_t b = {0, 0}; 604 605 bp2buf(myself, &b, "%s.%s", 606 o->zo_name, o->zo_domain); 607 t = getObjMapping(b.buf, 0, 1, 0, 0); 608 sfree(b.buf); 609 nis_destroy_object(o); 610 } 611 612 if (t != 0) { 613 lo = t->initTtlLo; 614 hi = t->initTtlHi; 615 ttl = t->ttl; 616 /* TTL == 0 means always expired */ 617 if (ttl == 0) 618 ttl = -1; 619 } else { 620 /* 621 * No expiration time initialization 622 * data. Cook up values that will 623 * result in mapping.expire[where] 624 * set to maxTimeT. 625 */ 626 hi = lo = ttl = maxTimeT - now.tv_sec; 627 } 628 } 629 630 if (initialLoad) { 631 int interval = hi - lo + 1; 632 if (interval <= 1) { 633 mapping.expire[where] = now.tv_sec + lo; 634 } else { 635 srand48(now.tv_sec); 636 mapping.expire[where] = now.tv_sec + 637 (lrand48() % interval); 638 } 639 if (mapping.enumExpire == 0 || 640 mapping.expire[where] < 641 mapping.enumExpire) 642 mapping.enumExpire = mapping.expire[where]; 643 } else { 644 mapping.expire[where] = now.tv_sec + ttl; 645 } 646 } 647 } 648 649 /* 650 * Add given entry to table in first available slot (either look in freelist 651 * or add to end of table) and return the the position of where the record 652 * is placed. 'count' is incremented if entry is added. Table may grow 653 * as a side-effect of the addition. Copy is made of input. 654 */ 655 entryp 656 db_table::add_entry(entry_object *obj, int initialLoad) { 657 /* 658 * We're returning an index of the table array, so the caller 659 * should hold a lock until done with the index. To save us 660 * the bother of upgrading to a write lock, it might as well 661 * be a write lock to begin with. 662 */ 663 ASSERTWHELD(table); 664 entryp where = freelist.pop(); 665 if (where == NULL) { /* empty freelist */ 666 if (last_used >= (table_size-1)) /* full (> is for 0) */ 667 grow(); 668 where = ++last_used; 669 } 670 if (tab != NULL) { 671 ++count; 672 setEntryExp(where, obj, initialLoad); 673 674 if (enumMode.flag) 675 enumTouch(where); 676 tab[where] = new_entry(obj); 677 return (where); 678 } else { 679 return (NULL); 680 } 681 } 682 683 /* 684 * Replaces object at specified location by given entry. 685 * Returns TRUE if replacement successful; FALSE otherwise. 686 * There must something already at the specified location, otherwise, 687 * replacement fails. Copy is not made of the input. 688 * The pre-existing entry is freed. 689 */ 690 bool_t 691 db_table::replace_entry(entryp where, entry_object * obj) 692 { 693 ASSERTWHELD(table); 694 if (where < DB_TABLE_START || where >= table_size || 695 tab == NULL || tab[where] == NULL) 696 return (FALSE); 697 /* (Re-)set the entry TTL */ 698 setEntryExp(where, obj, 0); 699 700 if (enumMode.flag) 701 enumTouch(where); 702 free_entry(tab[where]); 703 tab[where] = obj; 704 return (TRUE); 705 } 706 707 /* 708 * Deletes entry at specified location. Returns TRUE if location is valid; 709 * FALSE if location is invalid, or the freed location cannot be added to 710 * the freelist. 'count' is decremented if the deletion occurs. The object 711 * at that location is freed. 712 */ 713 bool_t 714 db_table::delete_entry(entryp where) 715 { 716 bool_t ret = TRUE; 717 718 ASSERTWHELD(table); 719 if (where < DB_TABLE_START || where >= table_size || 720 tab == NULL || tab[where] == NULL) 721 return (FALSE); 722 if (mapping.expire != NULL) { 723 mapping.expire[where] = 0; 724 } 725 if (enumMode.flag) 726 enumTouch(where); 727 free_entry(tab[where]); 728 tab[where] = NULL; /* very important to set it to null */ 729 --count; 730 if (where == last_used) { /* simple case, deleting from end */ 731 --last_used; 732 return (TRUE); 733 } else { 734 return (freelist.push(where)); 735 } 736 return (ret); 737 } 738 739 /* 740 * Returns statistics of table. 741 * [vector_size][table_size][last_used][count][freelist]. 742 * It is up to the caller to free the returned vector when it is through. 743 * The free list is included if 'fl' is TRUE. 744 */ 745 long * 746 db_table::stats(bool_t include_freelist) 747 { 748 long *answer; 749 750 READLOCK(this, NULL, "r db_table::stats"); 751 if (include_freelist) 752 answer = freelist.stats(3); 753 else { 754 answer = (long *)malloc(3*sizeof (long)); 755 } 756 757 if (answer) { 758 answer[0] = table_size; 759 answer[1] = last_used; 760 answer[2] = count; 761 } 762 READUNLOCK(this, answer, "ru db_table::stats"); 763 return (answer); 764 } 765 766 bool_t 767 db_table::configure(char *tablePath) { 768 long i; 769 struct timeval now; 770 const char *myself = "db_table::configure"; 771 772 (void) gettimeofday(&now, NULL); 773 774 WRITELOCK(this, FALSE, "db_table::configure w"); 775 776 /* (Re-)initialize from global info */ 777 initMappingStruct(&mapping); 778 779 /* Retrieve table mapping for this table */ 780 mapping.tm = (__nis_table_mapping_t *)__nis_find_item_mt( 781 tablePath, &ldapMappingList, 0, 0); 782 if (mapping.tm != 0) { 783 __nis_object_dn_t *odn = mapping.tm->objectDN; 784 785 /* 786 * The mapping.fromLDAP and mapping.toLDAP fields serve as 787 * quick-references that tell us if mapping is enabled. 788 * Hence, initialize them appropriately from the table 789 * mapping objectDN. 790 */ 791 while (odn != 0 && (!mapping.fromLDAP || !mapping.toLDAP)) { 792 if (odn->read.scope != LDAP_SCOPE_UNKNOWN) 793 mapping.fromLDAP = TRUE; 794 if (odn->write.scope != LDAP_SCOPE_UNKNOWN) 795 mapping.toLDAP = TRUE; 796 odn = (__nis_object_dn_t *)odn->next; 797 } 798 799 /* Set the timeout values */ 800 mapping.initTtlLo = mapping.tm->initTtlLo; 801 mapping.initTtlHi = mapping.tm->initTtlHi; 802 mapping.ttl = mapping.tm->ttl; 803 804 mapping.objName = sdup(myself, T, mapping.tm->objName); 805 if (mapping.objName == 0 && mapping.tm->objName != 0) { 806 WRITEUNLOCK(this, FALSE, 807 "db_table::configure wu objName"); 808 FATAL3("db_table::configure objName", 809 DB_MEMORY_LIMIT, FALSE); 810 } 811 } 812 813 /* 814 * In order to initialize the expiration times, we need to know 815 * if 'this' represents a table or a directory. To that end, we 816 * find an entry in the table, and invoke setEntryExp() on it. 817 * As a side effect, setEntryExp() will examine the pseudo-object 818 * in the entry, and set the expireType accordingly. 819 */ 820 if (tab != 0) { 821 for (i = 0; i <= last_used; i++) { 822 if (tab[i] != NULL) { 823 setEntryExp(i, tab[i], 1); 824 break; 825 } 826 } 827 } 828 829 /* 830 * If mapping from an LDAP repository, make sure we have the 831 * expiration time array. 832 */ 833 if ((mapping.expireType != NIS_TABLE_OBJ || mapping.fromLDAP) && 834 mapping.expire == NULL && table_size > 0 && tab != 0) { 835 db_status stat = allocateExpire(0, table_size); 836 if (stat != DB_SUCCESS) { 837 WRITEUNLOCK(this, FALSE, 838 "db_table::configure wu expire"); 839 FATAL3("db_table::configure expire", 840 stat, FALSE); 841 } 842 } else if (mapping.expireType == NIS_TABLE_OBJ && !mapping.fromLDAP && 843 mapping.expire != NULL) { 844 /* Not using expiration times */ 845 free(mapping.expire); 846 mapping.expire = NULL; 847 } 848 849 /* 850 * Set initial expire times for entries that don't already have one. 851 * Establish the enumeration expiration time to be the minimum of 852 * all expiration times in the table, though no larger than current 853 * time plus initTtlHi. 854 */ 855 if (mapping.expire != NULL) { 856 int interval = mapping.initTtlHi - mapping.initTtlLo + 1; 857 time_t enumXp = now.tv_sec + mapping.initTtlHi; 858 859 if (interval > 1) 860 srand48(now.tv_sec); 861 for (i = 0; i <= last_used; i++) { 862 if (tab[i] != NULL && mapping.expire[i] == 0) { 863 if (mapping.expireType == NIS_TABLE_OBJ) { 864 if (interval > 1) 865 mapping.expire[i] = 866 now.tv_sec + 867 (lrand48() % interval); 868 else 869 mapping.expire[i] = 870 now.tv_sec + 871 mapping.initTtlLo; 872 } else { 873 setEntryExp(i, tab[i], 1); 874 } 875 } 876 if (enumXp > mapping.expire[i]) 877 enumXp = mapping.expire[i]; 878 } 879 mapping.enumExpire = enumXp; 880 } 881 882 WRITEUNLOCK(this, FALSE, "db_table::configure wu"); 883 884 return (TRUE); 885 } 886 887 /* Return TRUE if the entry at 'loc' hasn't expired */ 888 bool_t 889 db_table::cacheValid(entryp loc) { 890 bool_t ret; 891 struct timeval now; 892 893 (void) gettimeofday(&now, 0); 894 895 READLOCK(this, FALSE, "db_table::cacheValid r"); 896 897 if (loc < 0 || loc >= table_size || tab == 0 || tab[loc] == 0) 898 ret = FALSE; 899 else if (mapping.expire == 0 || mapping.expire[loc] >= now.tv_sec) 900 ret = TRUE; 901 else 902 ret = FALSE; 903 904 READUNLOCK(this, ret, "db_table::cacheValid ru"); 905 906 return (ret); 907 } 908 909 /* 910 * If the supplied object has the same content as the one at 'loc', 911 * update the expiration time for the latter, and return TRUE. 912 */ 913 bool_t 914 db_table::dupEntry(entry_object *obj, entryp loc) { 915 if (obj == 0 || loc < 0 || loc >= table_size || tab == 0 || 916 tab[loc] == 0) 917 return (FALSE); 918 919 if (sameEntry(obj, tab[loc])) { 920 setEntryExp(loc, tab[loc], 0); 921 922 if (enumMode.flag > 0) 923 enumTouch(loc); 924 return (TRUE); 925 } 926 927 return (FALSE); 928 } 929 930 /* 931 * If enumeration mode is enabled, we keep a shadow array that initially 932 * starts out the same as 'tab'. Any update activity (add, remove, replace, 933 * or update timestamp) for an entry in the table means we delete the shadow 934 * array pointer. When ending enumeration mode, we return the shadow array. 935 * Any non-NULL entries in the array have not been updated since the start 936 * of the enum mode. 937 * 938 * The indended use is for enumeration of an LDAP container, where we 939 * will update all entries that currently exist in LDAP. The entries we 940 * don't update are those that don't exist in LDAP, and thus should be 941 * removed. 942 * 943 * Note that any LDAP query strictly speaking can be a partial enumeration 944 * (i.e., return more than one match). Since the query might also have 945 * matched multiple local DB entries, we need to do the same work as for 946 * enumeration for any query. In order to avoid having to work on the 947 * whole 'tab' array for simple queries (which we expect usually will 948 * match just one or at most a few entries), we have a "reduced" enum mode, 949 * where the caller supplies a count of the number of DB entries (derived 950 * from db_mindex::satisfy_query() or similar), and then uses enumSetup() 951 * to specify which 'tab' entries we're interested in. 952 */ 953 void 954 db_table::setEnumMode(long enumNum) { 955 const char *myself = "setEnumMode"; 956 957 enumMode.flag++; 958 if (enumMode.flag == 1) { 959 db_status stat; 960 961 if (enumNum < 0) 962 enumNum = 0; 963 else if (enumNum >= table_size) 964 enumNum = table_size; 965 966 enumCount.flag = enumNum; 967 968 stat = allocateEnumArray(0, table_size); 969 970 if (stat != DB_SUCCESS) { 971 enumMode.flag = 0; 972 enumCount.flag = 0; 973 logmsg(MSG_NOTIMECHECK, LOG_ERR, 974 "%s: No memory for enum check array; entry removal disabled", 975 myself); 976 } 977 } 978 } 979 980 void 981 db_table::clearEnumMode(void) { 982 if (enumMode.flag > 0) { 983 enumMode.flag--; 984 if (enumMode.flag == 0) { 985 sfree(enumArray.ptr); 986 enumArray.ptr = 0; 987 if (enumCount.flag > 0) { 988 sfree(enumIndex.ptr); 989 enumIndex.ptr = 0; 990 enumCount.flag = 0; 991 } 992 } 993 } 994 } 995 996 entry_object ** 997 db_table::endEnumMode(long *numEa) { 998 if (enumMode.flag > 0) { 999 enumMode.flag--; 1000 if (enumMode.flag == 0) { 1001 entry_obj **ea = (entry_object **)enumArray.ptr; 1002 long nea; 1003 1004 enumArray.ptr = 0; 1005 1006 if (enumCount.flag > 0) { 1007 nea = enumCount.flag; 1008 enumCount.flag = 0; 1009 sfree(enumIndex.ptr); 1010 enumIndex.ptr = 0; 1011 } else { 1012 nea = table_size; 1013 } 1014 1015 if (numEa != 0) 1016 *numEa = nea; 1017 1018 return (ea); 1019 } 1020 } 1021 1022 if (numEa != 0) 1023 *numEa = 0; 1024 1025 return (0); 1026 } 1027 1028 /* 1029 * Set the appropriate entry in the enum array to NULL. 1030 */ 1031 void 1032 db_table::enumTouch(entryp loc) { 1033 if (loc < 0 || loc >= table_size) 1034 return; 1035 1036 if (enumMode.flag > 0) { 1037 if (enumCount.flag < 1) { 1038 ((entry_object **)enumArray.ptr)[loc] = 0; 1039 } else { 1040 int i; 1041 1042 for (i = 0; i < enumCount.flag; i++) { 1043 if (loc == ((entryp *)enumIndex.ptr)[i]) { 1044 ((entry_object **)enumArray.ptr)[i] = 0; 1045 break; 1046 } 1047 } 1048 } 1049 } 1050 } 1051 1052 /* 1053 * Add the entry indicated by 'loc' to the enumIndex array, at 'index'. 1054 */ 1055 void 1056 db_table::enumSetup(entryp loc, long index) { 1057 if (enumMode.flag == 0 || loc < 0 || loc >= table_size || 1058 index < 0 || index >= enumCount.flag) 1059 return; 1060 1061 ((entryp *)enumIndex.ptr)[index] = loc; 1062 ((entry_object **)enumArray.ptr)[index] = tab[loc]; 1063 } 1064 1065 /* 1066 * Touch, i.e., update the expiration time for the entry. Also, if enum 1067 * mode is in effect, mark the entry used for enum purposes. 1068 */ 1069 void 1070 db_table::touchEntry(entryp loc) { 1071 if (loc < 0 || loc >= table_size || tab == 0 || tab[loc] == 0) 1072 return; 1073 1074 setEntryExp(loc, tab[loc], 0); 1075 1076 enumTouch(loc); 1077 } 1078 1079 /* ************************* pickle_table ********************* */ 1080 /* Does the actual writing to/from file specific for db_table structure. */ 1081 /* 1082 * This was a static earlier with the func name being transfer_aux. The 1083 * backup and restore project needed this to copy files over. 1084 */ 1085 bool_t 1086 transfer_aux_table(XDR* x, pptr dp) 1087 { 1088 return (xdr_db_table(x, (db_table*) dp)); 1089 } 1090 1091 class pickle_table: public pickle_file { 1092 public: 1093 pickle_table(char *f, pickle_mode m) : pickle_file(f, m) {} 1094 1095 /* Transfers db_table structure pointed to by dp to/from file. */ 1096 int transfer(db_table* dp) 1097 { return (pickle_file::transfer((pptr) dp, &transfer_aux_table)); } 1098 }; 1099 1100 /* 1101 * Writes the contents of table, including the all the entries, into the 1102 * specified file in XDR format. May need to change this to use APPEND 1103 * mode instead. 1104 */ 1105 int 1106 db_table::dump(char *file) 1107 { 1108 int ret; 1109 READLOCK(this, -1, "r db_table::dump"); 1110 pickle_table f(file, PICKLE_WRITE); /* may need to use APPEND mode */ 1111 int status = f.transfer(this); 1112 1113 if (status == 1) 1114 ret = -1; 1115 else 1116 ret = status; 1117 READUNLOCK(this, ret, "ru db_table::dump"); 1118 } 1119 1120 /* Constructor that loads in the table from the given file */ 1121 db_table::db_table(char *file) : freelist() 1122 { 1123 pickle_table f(file, PICKLE_READ); 1124 tab = NULL; 1125 table_size = last_used = count = 0; 1126 1127 /* load table */ 1128 if (f.transfer(this) < 0) { 1129 /* fell through, something went wrong, initialize to null */ 1130 tab = NULL; 1131 table_size = last_used = count = 0; 1132 freelist.init(); 1133 } 1134 1135 db_table_ldap_init(); 1136 initMappingStruct(&mapping); 1137 } 1138 1139 /* Returns whether location is valid. */ 1140 bool_t db_table::entry_exists_p(entryp i) { 1141 bool_t ret = FALSE; 1142 READLOCK(this, FALSE, "r db_table::entry_exists_p"); 1143 if (tab != NULL && i < table_size) 1144 ret = tab[i] != NULL; 1145 READUNLOCK(this, ret, "ru db_table::entry_exists_p"); 1146 return (ret); 1147 } 1148 1149 /* Empty free list */ 1150 void db_free_list::init() { 1151 WRITELOCKV(this, "w db_free_list::init"); 1152 head = NULL; 1153 count = 0; 1154 WRITEUNLOCKV(this, "wu db_free_list::init"); 1155 } 1156