xref: /illumos-gate/usr/src/lib/libc/port/gen/initgroups.c (revision 45ede40b2394db7967e59f19288fae9b62efd4aa)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  * Copyright 2020 Joyent, Inc.
26  */
27 
28 /*	Copyright (c) 1988 AT&T	*/
29 /*	  All Rights Reserved  	*/
30 
31 #pragma weak _initgroups = initgroups
32 
33 #include <stdlib.h>
34 #include <string.h>
35 #include <errno.h>
36 #include <grp.h>
37 #include <limits.h>
38 #include <sys/debug.h>
39 #include <sys/types.h>
40 #include <sys/param.h>
41 #include <unistd.h>
42 
43 /* Private interface to the groups code in getgrnam.c */
44 extern int _getgroupsbymember(const char *, gid_t[], int, int);
45 
46 int
47 initgroups(const char *uname, gid_t agroup)
48 {
49 	gid_t *groups;
50 	long ngroups_max;
51 	int ngroups;
52 	int errsave, retsave;
53 
54 	if ((ngroups_max = sysconf(_SC_NGROUPS_MAX)) < 0) {
55 		/* ==== Hope sysconf() set errno to something sensible */
56 		return (-1);
57 	}
58 	/*
59 	 * ngroups_max is the maximum number of supplemental groups per
60 	 * process. if no supplemental groups are allowed, we're done.
61 	 */
62 	if (ngroups_max == 0)
63 		return (0);
64 
65 	if ((groups = (gid_t *)calloc(ngroups_max, sizeof (gid_t))) == 0) {
66 		errno = ENOMEM;
67 		return (-1);
68 	}
69 	groups[0] = agroup;
70 
71 	ngroups = _getgroupsbymember(uname, groups, (int)ngroups_max,
72 	    (agroup <= MAXUID) ? 1 : 0);
73 	if (ngroups < 0) {
74 		/* XXX -- man page does not define a value for errno in */
75 		/* this case.  Should be looked into sometime.	*/
76 		free(groups);
77 		return (-1);
78 	}
79 
80 	retsave = setgroups(ngroups, groups);
81 	errsave = errno;
82 
83 	free(groups);
84 
85 	errno = errsave;
86 	return (retsave);
87 }
88 
89 int
90 getgrouplist(const char *uname, gid_t agroup, gid_t *groups, int *ngroups)
91 {
92 	gid_t *grouplist = NULL;
93 	gid_t *grpptr;
94 	long ngroups_max;
95 	int sz, ret;
96 
97 	/*
98 	 * We require sysconf(_SC_NGROUPS_MAX) either returns a sane value (>0)
99 	 * or fails. If it returns 0, something has gone horribly, horribly
100 	 * wrong.
101 	 */
102 	ngroups_max = sysconf(_SC_NGROUPS_MAX);
103 	if (ngroups_max > INT_MAX)
104 		ngroups_max = INT_MAX;
105 	else if (ngroups_max < 0)
106 		return (-1);
107 	VERIFY3S(ngroups_max, >, 0);
108 
109 	/*
110 	 * The documented behavior of getgrouplist(3C) on other platforms
111 	 * (e.g. Linux and FreeBSD) do not list any failures other than
112 	 * 'groups is too small'. However, examination of some popular
113 	 * implementations of getgrouplist on those platforms (e.g. glibc and
114 	 * musl -- both appear to share the same man page for getgrouplist(3))
115 	 * show that they can in fact fail for other reasons (e.g. ENOMEM,
116 	 * EIO).
117 	 *
118 	 * As such, we don't attempt to catch and deal with any underlying
119 	 * errors here. Instead, any underlying errors cause getgrouplist(3C)
120 	 * to fail, and any errno value set is left unmodified for examination
121 	 * by the caller.
122 	 *
123 	 * One small complication is that the internal _getgroupsbymember()
124 	 * itself doesn't provide any way to report back if the buffer supplied
125 	 * to _getgroupsbymember() is too small. Instead, we always supply
126 	 * a buffer large enough to hold _SC_NGROUPS_MAX entries -- either
127 	 * by allocating one ourselves or using the user supplied buffer if
128 	 * sufficiently large.
129 	 *
130 	 * The system behavior is undefined for any user in more groups than
131 	 * _SC_NGROUPS_MAX -- initgroups(3C) for example just ignores any
132 	 * excess groups (and which _SC_NGROUPS_MAX sized subset of groups end
133 	 * up being set as the secondary groups is non-deterministic), so this
134 	 * seems reasonable. Modifying _getgroupsbymember() would require
135 	 * modification of the NSS code (due to the pervasive special handling
136 	 * of _getgroupsbymember() in the NSS code) as well as modification of
137 	 * all NSS backends that implement it. As there are at least a few
138 	 * known third party NSS backends, we've opted to avoid doing this
139 	 * for now.
140 	 */
141 
142 	if ((ngroups == NULL) || (*ngroups <= 0) || (groups == NULL)) {
143 		*ngroups = ngroups_max;
144 		errno = EINVAL;
145 		return (-1);
146 	}
147 
148 	if (*ngroups < ngroups_max) {
149 		/*
150 		 * The caller's buffer might be too small, try to use our own
151 		 * buffer instead.
152 		 */
153 		grouplist = calloc(ngroups_max, sizeof (gid_t));
154 		if (grouplist == NULL)
155 			return (-1);
156 
157 		grpptr = grouplist;
158 		sz = ngroups_max;
159 	} else {
160 		/* The caller's buffer is large enough, so use it */
161 		grpptr = groups;
162 		sz = *ngroups;
163 	}
164 
165 	/*
166 	 * Always add agroup as the first member -- it should always appear
167 	 * in the resulting list of groups, and this allows the backends to
168 	 * skip adding it.
169 	 */
170 	grpptr[0] = agroup;
171 
172 	ret = _getgroupsbymember(uname, grpptr, sz, 1);
173 
174 	/*
175 	 * We passed in 1 group entry. We should at minimum get 1 entry back
176 	 * from _getgroupsbymember(). If we don't, there is a bug in the NSS
177 	 * code or a backend. Since the return value is used to size a copy
178 	 * further below, we hard fail (abort) here if we get back an
179 	 * impossible value so we're not traipsing all over memory (which would
180 	 * just make debugging any such problem all the more difficult).
181 	 */
182 	VERIFY3S(ret, >, 0);
183 
184 	/*
185 	 * If we used the caller's buffer, it means its size was >= ngroups_max
186 	 * entries, and we're done.
187 	 */
188 	if (grpptr == groups) {
189 		/* Set *ngroups to the number of entries in groups */
190 		*ngroups = ret;
191 		return (ret);
192 	}
193 
194 	/* We verified earlier *ngroups > 0 */
195 	if (ret < *ngroups) {
196 		/* Copy as many gids that will fit */
197 		(void) memcpy(groups, grpptr, *ngroups * sizeof (gid_t));
198 
199 		*ngroups = ret;
200 		ret = -1;
201 		errno = ERANGE;
202 	} else {
203 		(void) memcpy(groups, grpptr, ret * sizeof (gid_t));
204 		*ngroups = ret;
205 	}
206 
207 	free(grouplist);
208 	return (ret);
209 }
210