1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 2006, 2010, Oracle and/or its affiliates. All rights reserved. 24 */ 25 /* 26 * Copyright (c) 2018, Joyent, Inc. All rights reserved. 27 */ 28 29 #ifndef _LIBTOPO_H 30 #define _LIBTOPO_H 31 32 #include <sys/nvpair.h> 33 #include <stdio.h> 34 #include <libdevinfo.h> 35 36 #ifdef __cplusplus 37 extern "C" { 38 #endif 39 40 #define TOPO_VERSION 1 /* Library ABI Interface Version */ 41 42 typedef struct topo_hdl topo_hdl_t; 43 typedef struct topo_node tnode_t; 44 typedef struct topo_walk topo_walk_t; 45 typedef int32_t topo_instance_t; 46 typedef uint32_t topo_version_t; 47 48 typedef struct topo_list { 49 struct topo_list *l_prev; 50 struct topo_list *l_next; 51 } topo_list_t; 52 53 typedef struct topo_faclist { 54 topo_list_t tf_list; 55 tnode_t *tf_node; 56 } topo_faclist_t; 57 58 /* 59 * The following functions, error codes and data structures are private 60 * to libtopo snapshot consumers and enumerator modules. 61 */ 62 extern topo_hdl_t *topo_open(int, const char *, int *); 63 extern void topo_close(topo_hdl_t *); 64 extern char *topo_snap_hold(topo_hdl_t *, const char *, int *); 65 extern void topo_snap_release(topo_hdl_t *); 66 67 /* 68 * Snapshot walker support 69 */ 70 typedef int (*topo_walk_cb_t)(topo_hdl_t *, tnode_t *, void *); 71 72 extern topo_walk_t *topo_walk_init(topo_hdl_t *, const char *, topo_walk_cb_t, 73 void *, int *); 74 extern int topo_walk_step(topo_walk_t *, int); 75 extern void topo_walk_fini(topo_walk_t *); 76 extern di_node_t topo_hdl_devinfo(topo_hdl_t *); 77 extern di_prom_handle_t topo_hdl_prominfo(topo_hdl_t *); 78 79 /* 80 * Walk status returned from walker 81 */ 82 #define TOPO_WALK_ERR -1 83 #define TOPO_WALK_NEXT 0 84 #define TOPO_WALK_TERMINATE 1 85 86 /* 87 * Types of walks: depth-first (child) or breadth-first (sibling) 88 */ 89 #define TOPO_WALK_CHILD 0x0001 90 #define TOPO_WALK_SIBLING 0x0002 91 92 /* 93 * FMRI helper routines 94 */ 95 extern int topo_fmri_present(topo_hdl_t *, nvlist_t *, int *); 96 extern int topo_fmri_replaced(topo_hdl_t *, nvlist_t *, int *); 97 extern int topo_fmri_contains(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 98 extern int topo_fmri_expand(topo_hdl_t *, nvlist_t *, int *); 99 extern int topo_fmri_unusable(topo_hdl_t *, nvlist_t *, int *); 100 extern int topo_fmri_service_state(topo_hdl_t *, nvlist_t *, int *); 101 extern int topo_fmri_retire(topo_hdl_t *, nvlist_t *, int *); 102 extern int topo_fmri_unretire(topo_hdl_t *, nvlist_t *, int *); 103 extern int topo_fmri_nvl2str(topo_hdl_t *, nvlist_t *, char **, int *); 104 extern int topo_fmri_str2nvl(topo_hdl_t *, const char *, nvlist_t **, int *); 105 extern int topo_fmri_asru(topo_hdl_t *, nvlist_t *, nvlist_t **, int *); 106 extern int topo_fmri_fru(topo_hdl_t *, nvlist_t *, nvlist_t **, 107 int *); 108 extern int topo_fmri_label(topo_hdl_t *, nvlist_t *, char **, int *); 109 extern int topo_fmri_serial(topo_hdl_t *, nvlist_t *, char **, int *); 110 extern int topo_fmri_compare(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 111 extern int topo_fmri_facility(topo_hdl_t *, nvlist_t *, const char *, 112 uint32_t, topo_walk_cb_t, void *, int *); 113 114 /* 115 * Consolidation private utility functions 116 */ 117 extern ulong_t topo_fmri_strhash(topo_hdl_t *, const char *); 118 extern ulong_t topo_fmri_strhash_noauth(topo_hdl_t *, const char *); 119 extern boolean_t topo_fmri_strcmp(topo_hdl_t *, const char *, const char *); 120 extern boolean_t topo_fmri_strcmp_noauth(topo_hdl_t *, const char *, 121 const char *); 122 123 /* 124 * Topo node utilities: callable from topo_walk_step() callback or module 125 * enumeration, topo_mod_enumerate() 126 */ 127 extern char *topo_node_name(tnode_t *); 128 extern topo_instance_t topo_node_instance(tnode_t *); 129 extern tnode_t *topo_node_parent(tnode_t *); 130 extern void *topo_node_private(tnode_t *); 131 extern int topo_node_flags(tnode_t *); 132 extern int topo_node_asru(tnode_t *, nvlist_t **, nvlist_t *, int *); 133 extern int topo_node_fru(tnode_t *, nvlist_t **, nvlist_t *, int *); 134 extern int topo_node_resource(tnode_t *, nvlist_t **, int *); 135 extern int topo_node_label(tnode_t *, char **, int *); 136 extern tnode_t *topo_node_lookup(tnode_t *, const char *, topo_instance_t); 137 extern int topo_method_invoke(tnode_t *node, const char *, topo_version_t, 138 nvlist_t *, nvlist_t **, int *); 139 extern boolean_t topo_method_supported(tnode_t *, const char *, 140 topo_version_t); 141 extern int topo_node_facility(topo_hdl_t *, tnode_t *, const char *, 142 uint32_t, topo_faclist_t *, int *); 143 extern int topo_node_child_walk(topo_hdl_t *, tnode_t *, topo_walk_cb_t, 144 void *, int *); 145 146 /* 147 * Node flags: denotes type of node 148 */ 149 #define TOPO_NODE_DEFAULT 0 150 #define TOPO_NODE_FACILITY 1 151 152 #define TOPO_FAC_TYPE_SENSOR "sensor" 153 #define TOPO_FAC_TYPE_INDICATOR "indicator" 154 155 /* 156 * Topo property get functions 157 */ 158 extern int topo_prop_get_int32(tnode_t *, const char *, const char *, 159 int32_t *, int *); 160 extern int topo_prop_get_uint32(tnode_t *, const char *, const char *, 161 uint32_t *, int *); 162 extern int topo_prop_get_int64(tnode_t *, const char *, const char *, 163 int64_t *, int *); 164 extern int topo_prop_get_uint64(tnode_t *, const char *, const char *, 165 uint64_t *, int *); 166 extern int topo_prop_get_double(tnode_t *, const char *, const char *, 167 double *, int *); 168 extern int topo_prop_get_string(tnode_t *, const char *, const char *, 169 char **, int *); 170 extern int topo_prop_get_fmri(tnode_t *, const char *, const char *, 171 nvlist_t **, int *); 172 extern int topo_prop_get_int32_array(tnode_t *, const char *, const char *, 173 int32_t **, uint_t *, int *); 174 extern int topo_prop_get_uint32_array(tnode_t *, const char *, const char *, 175 uint32_t **, uint_t *, int *); 176 extern int topo_prop_get_int64_array(tnode_t *, const char *, const char *, 177 int64_t **, uint_t *, int *); 178 extern int topo_prop_get_uint64_array(tnode_t *, const char *, const char *, 179 uint64_t **, uint_t *, int *); 180 extern int topo_prop_get_string_array(tnode_t *, const char *, const char *, 181 char ***, uint_t *, int *); 182 extern int topo_prop_get_fmri_array(tnode_t *, const char *, const char *, 183 nvlist_t ***, uint_t *, int *); 184 185 /* 186 * Topo property set functions 187 */ 188 extern int topo_prop_set_int32(tnode_t *, const char *, const char *, int, 189 int32_t, int *); 190 extern int topo_prop_set_uint32(tnode_t *, const char *, const char *, int, 191 uint32_t, int *); 192 extern int topo_prop_set_int64(tnode_t *, const char *, const char *, 193 int, int64_t, int *); 194 extern int topo_prop_set_uint64(tnode_t *, const char *, const char *, 195 int, uint64_t, int *); 196 extern int topo_prop_set_double(tnode_t *, const char *, const char *, 197 int, double, int *); 198 extern int topo_prop_set_string(tnode_t *, const char *, const char *, 199 int, const char *, int *); 200 extern int topo_prop_set_fmri(tnode_t *, const char *, const char *, 201 int, const nvlist_t *, int *); 202 extern int topo_prop_set_int32_array(tnode_t *, const char *, const char *, int, 203 int32_t *, uint_t, int *); 204 extern int topo_prop_set_uint32_array(tnode_t *, const char *, const char *, 205 int, uint32_t *, uint_t, int *); 206 extern int topo_prop_set_int64_array(tnode_t *, const char *, const char *, 207 int, int64_t *, uint_t, int *); 208 extern int topo_prop_set_uint64_array(tnode_t *, const char *, const char *, 209 int, uint64_t *, uint_t, int *); 210 extern int topo_prop_set_string_array(tnode_t *, const char *, const char *, 211 int, const char **, uint_t, int *); 212 extern int topo_prop_set_fmri_array(tnode_t *, const char *, const char *, 213 int, const nvlist_t **, uint_t, int *); 214 215 #define TOPO_PROP_IMMUTABLE 0 216 #define TOPO_PROP_MUTABLE 0x01 217 #define TOPO_PROP_NONVOLATILE 0x02 218 219 /* Protocol property group and property names */ 220 #define TOPO_PGROUP_PROTOCOL "protocol" /* Required property group */ 221 #define TOPO_PROP_RESOURCE "resource" /* resource FMRI */ 222 #define TOPO_PROP_ASRU "ASRU" /* ASRU FMRI */ 223 #define TOPO_PROP_FRU "FRU" /* FRU FMRI */ 224 #define TOPO_PROP_MOD "module" /* software module FMRI */ 225 #define TOPO_PROP_PKG "package" /* software package FMRI */ 226 #define TOPO_PROP_LABEL "label" /* property LABEL */ 227 228 #define TOPO_METH_FAC_ENUM "fac_enum" 229 230 /* 231 * System property group 232 */ 233 #define TOPO_PGROUP_SYSTEM "system" 234 #define TOPO_PROP_ISA "isa" 235 #define TOPO_PROP_MACHINE "machine" 236 237 #define TOPO_PGROUP_IPMI "ipmi" 238 239 /* 240 * These enum definitions are used to define a set of error tags associated with 241 * libtopo error conditions occuring during the adminstration of 242 * properties, invocation of methods and fmri-based queries. The shell script 243 * mkerror.sh is used to parse this file and create a corresponding topo_error.c 244 * source file. 245 * 246 * If you do something other than add a new error tag here, you may need to 247 * update the mkerror shell script as it is based upon simple regexps. 248 */ 249 typedef enum topo_prop_errno { 250 ETOPO_PROP_UNKNOWN = 3000, /* unknown topo prop error */ 251 ETOPO_PROP_NOENT, /* undefined property or property group */ 252 ETOPO_PROP_DEFD, /* static property already defined */ 253 ETOPO_PROP_NOMEM, /* memory limit exceeded during property allocation */ 254 ETOPO_PROP_TYPE, /* invalid property type */ 255 ETOPO_PROP_NAME, /* invalid property name */ 256 ETOPO_PROP_NOINHERIT, /* can not inherit property */ 257 ETOPO_PROP_NVL, /* malformed property nvlist */ 258 ETOPO_PROP_METHOD, /* get property method failed */ 259 ETOPO_PROP_END /* end of prop errno list (to ease auto-merge) */ 260 } topo_prop_errno_t; 261 262 typedef enum topo_method_errno { 263 ETOPO_METHOD_UNKNOWN = 3100, /* unknown topo method error */ 264 ETOPO_METHOD_INVAL, /* invalid method registration */ 265 ETOPO_METHOD_NOTSUP, /* method not supported */ 266 ETOPO_METHOD_FAIL, /* method failed */ 267 ETOPO_METHOD_VEROLD, /* app is compiled to use obsolete method */ 268 ETOPO_METHOD_VERNEW, /* app is compiled to use obsolete method */ 269 ETOPO_METHOD_NOMEM, /* memory limit exceeded during method op */ 270 ETOPO_METHOD_DEFD, /* method op already defined */ 271 ETOPO_METHOD_END /* end of method errno list */ 272 } topo_method_errno_t; 273 274 typedef enum topo_fmri_errno { 275 ETOPO_FMRI_UNKNOWN = 3200, /* unknown topo fmri error */ 276 ETOPO_FMRI_NVL, /* nvlist allocation failure for FMRI */ 277 ETOPO_FMRI_VERSION, /* invalid FMRI scheme version */ 278 ETOPO_FMRI_MALFORM, /* malformed FMRI */ 279 ETOPO_FMRI_NOMEM, /* memory limit exceeded */ 280 ETOPO_FMRI_END /* end of fmri errno list */ 281 } topo_fmri_errno_t; 282 283 typedef enum topo_hdl_errno { 284 ETOPO_HDL_UNKNOWN = 3300, /* unknown topo handle error */ 285 ETOPO_HDL_ABIVER, /* handle opened with invalid ABI version */ 286 ETOPO_HDL_SNAP, /* snapshot already taken */ 287 ETOPO_HDL_INVAL, /* invalid argument specified */ 288 ETOPO_HDL_UUID, /* uuid already set */ 289 ETOPO_HDL_NOMEM, /* memory limit exceeded */ 290 ETOPO_HDL_END /* end of handle errno list */ 291 } topo_hdl_errno_t; 292 293 extern const char *topo_strerror(int); 294 extern void topo_hdl_strfree(topo_hdl_t *, char *); 295 extern void topo_debug_set(topo_hdl_t *, const char *, const char *); 296 297 /* 298 * The following functions and data structures to support property 299 * observability are private to the fmtopo command. 300 */ 301 302 /* 303 * Each topology node advertises the name and data stability of each of its 304 * modules and properties. (see attributes(5)). 305 */ 306 307 /* 308 * Topo stability attributes 309 */ 310 typedef enum topo_stability { 311 TOPO_STABILITY_UNKNOWN = 0, /* private to libtopo */ 312 TOPO_STABILITY_INTERNAL, /* private to libtopo */ 313 TOPO_STABILITY_PRIVATE, /* private to Sun */ 314 TOPO_STABILITY_OBSOLETE, /* scheduled for removal */ 315 TOPO_STABILITY_EXTERNAL, /* not controlled by Sun */ 316 TOPO_STABILITY_UNSTABLE, /* new or rapidly changing */ 317 TOPO_STABILITY_EVOLVING, /* less rapidly changing */ 318 TOPO_STABILITY_STABLE, /* mature interface from Sun */ 319 TOPO_STABILITY_STANDARD /* industry standard */ 320 } topo_stability_t; 321 322 #define TOPO_STABILITY_MAX TOPO_STABILITY_STANDARD /* max valid stab */ 323 324 typedef struct topo_pgroup_info { 325 const char *tpi_name; /* property group name */ 326 topo_stability_t tpi_namestab; /* stability of group name */ 327 topo_stability_t tpi_datastab; /* stability of all property values */ 328 topo_version_t tpi_version; /* version of pgroup definition */ 329 } topo_pgroup_info_t; 330 331 extern topo_stability_t topo_name2stability(const char *); 332 extern const char *topo_stability2name(topo_stability_t); 333 extern void topo_pgroup_destroy(tnode_t *, const char *); 334 extern topo_pgroup_info_t *topo_pgroup_info(tnode_t *, const char *, int *); 335 336 typedef enum { 337 TOPO_TYPE_INVALID = 0, 338 TOPO_TYPE_BOOLEAN, /* boolean */ 339 TOPO_TYPE_INT32, /* int32_t */ 340 TOPO_TYPE_UINT32, /* uint32_t */ 341 TOPO_TYPE_INT64, /* int64_t */ 342 TOPO_TYPE_UINT64, /* uint64_t */ 343 TOPO_TYPE_STRING, /* const char* */ 344 TOPO_TYPE_TIME, /* uint64_t */ 345 TOPO_TYPE_SIZE, /* uint64_t */ 346 TOPO_TYPE_FMRI, /* nvlist_t */ 347 TOPO_TYPE_INT32_ARRAY, /* array of int32_t */ 348 TOPO_TYPE_UINT32_ARRAY, /* array of uint32_t */ 349 TOPO_TYPE_INT64_ARRAY, /* array of int64_t */ 350 TOPO_TYPE_UINT64_ARRAY, /* array of uint64_t */ 351 TOPO_TYPE_STRING_ARRAY, /* array of const char* */ 352 TOPO_TYPE_FMRI_ARRAY, /* array of nvlist_t */ 353 TOPO_TYPE_DOUBLE /* double */ 354 } topo_type_t; 355 356 extern nvlist_t *topo_prop_getprops(tnode_t *, int *err); 357 extern int topo_prop_getprop(tnode_t *, const char *, const char *, 358 nvlist_t *, nvlist_t **, int *); 359 extern int topo_prop_getpgrp(tnode_t *, const char *, nvlist_t **, int *); 360 extern int topo_prop_setprop(tnode_t *, const char *, nvlist_t *, 361 int, nvlist_t *, int *); 362 extern int topo_fmri_getprop(topo_hdl_t *, nvlist_t *, const char *, 363 const char *, nvlist_t *, nvlist_t **, int *); 364 extern int topo_fmri_getpgrp(topo_hdl_t *, nvlist_t *, const char *, 365 nvlist_t **, int *); 366 extern int topo_fmri_setprop(topo_hdl_t *, nvlist_t *, const char *, 367 nvlist_t *, int, nvlist_t *, int *); 368 extern void topo_pgroup_hcset(tnode_t *, nvlist_t *); 369 370 /* Property node NVL names used in topo_prop_getprops */ 371 #define TOPO_PROP_GROUP "property-group" 372 #define TOPO_PROP_GROUP_NAME "property-group-name" 373 #define TOPO_PROP_GROUP_DSTAB "property-group-data-stability" 374 #define TOPO_PROP_GROUP_NSTAB "property-group-name-stability" 375 #define TOPO_PROP_GROUP_VERSION "property-group-version" 376 #define TOPO_PROP_VAL "property" 377 #define TOPO_PROP_VAL_NAME "property-name" 378 #define TOPO_PROP_VAL_VAL "property-value" 379 #define TOPO_PROP_VAL_TYPE "property-type" 380 #define TOPO_PROP_FLAG "property-flag" 381 382 /* 383 * ARGS list used in topo property methods 384 */ 385 #define TOPO_PROP_ARGS "args" 386 #define TOPO_PROP_PARGS "private-args" 387 388 extern int topo_xml_print(topo_hdl_t *, FILE *, const char *scheme, int *); 389 390 extern void *topo_hdl_alloc(topo_hdl_t *, size_t); 391 extern void *topo_hdl_zalloc(topo_hdl_t *, size_t); 392 extern void topo_hdl_free(topo_hdl_t *, void *, size_t); 393 extern int topo_hdl_nvalloc(topo_hdl_t *, nvlist_t **, uint_t); 394 extern int topo_hdl_nvdup(topo_hdl_t *, nvlist_t *, nvlist_t **); 395 extern char *topo_hdl_strdup(topo_hdl_t *, const char *); 396 397 /* 398 * Interfaces for converting sensor/indicator types, units, states, etc to 399 * a string 400 */ 401 void topo_sensor_type_name(uint32_t type, char *buf, size_t len); 402 void topo_sensor_units_name(uint8_t type, char *buf, size_t len); 403 void topo_led_type_name(uint8_t type, char *buf, size_t len); 404 void topo_led_state_name(uint8_t type, char *buf, size_t len); 405 void topo_sensor_state_name(uint32_t sensor_type, uint8_t state, char *buf, 406 size_t len); 407 408 /* 409 * Defines for standard properties for sensors and indicators 410 */ 411 #define TOPO_PGROUP_FACILITY "facility" 412 413 #define TOPO_SENSOR_READING "reading" 414 #define TOPO_SENSOR_STATE "state" 415 #define TOPO_SENSOR_CLASS "sensor-class" 416 #define TOPO_FACILITY_TYPE "type" 417 #define TOPO_SENSOR_UNITS "units" 418 #define TOPO_LED_MODE "mode" 419 420 #define TOPO_PROP_THRESHOLD_LNC "threshold-lower-non-critical" 421 #define TOPO_PROP_THRESHOLD_LCR "threshold-lower-critical" 422 #define TOPO_PROP_THRESHOLD_LNR "threshold-lower-non-recoverable" 423 424 #define TOPO_PROP_THRESHOLD_UNC "threshold-upper-non-critical" 425 #define TOPO_PROP_THRESHOLD_UCR "threshold-upper-critical" 426 #define TOPO_PROP_THRESHOLD_UNR "threshold-upper-non-recoverable" 427 428 /* 429 * Sensor Classes 430 * 431 * The "sensor-class" property in the "facility" propgroup on 432 * facility nodes of type "sensor" should be set to one of these 433 * two values. 434 * 435 * Threshold sensors provide an analog sensor reading via the 436 * "reading" property in the facility propgroup. They will also 437 * provide one or more discrete states via the "state" property 438 * in the facility propgroup. 439 * 440 * Discrete sensors will not provide an analog reading by will 441 * provide one or more discrete states via the "state" property 442 * in the facility propgroup. 443 */ 444 #define TOPO_SENSOR_CLASS_THRESHOLD "threshold" 445 #define TOPO_SENSOR_CLASS_DISCRETE "discrete" 446 447 /* 448 * Sensor unit types. We're using the unit types and corresponding 449 * codes described in the IPMI 2.0 spec as a reference as it seems to be a 450 * reasonably comprehensive list. This also simplifies the IPMI provider code 451 * since the unit type codes will map exactly to what libtopo uses (so no 452 * conversion necessary). 453 */ 454 typedef enum topo_sensor_unit { 455 TOPO_SENSOR_UNITS_UNSPECIFIED = 0, 456 TOPO_SENSOR_UNITS_DEGREES_C, 457 TOPO_SENSOR_UNITS_DEGREES_F, 458 TOPO_SENSOR_UNITS_DEGREES_K, 459 TOPO_SENSOR_UNITS_VOLTS, 460 TOPO_SENSOR_UNITS_AMPS, 461 TOPO_SENSOR_UNITS_WATTS, 462 TOPO_SENSOR_UNITS_JOULES, 463 TOPO_SENSOR_UNITS_COULOMBS, 464 TOPO_SENSOR_UNITS_VA, 465 TOPO_SENSOR_UNITS_NITS, 466 TOPO_SENSOR_UNITS_LUMEN, 467 TOPO_SENSOR_UNITS_LUX, 468 TOPO_SENSOR_UNITS_CANDELA, 469 TOPO_SENSOR_UNITS_KPA, 470 TOPO_SENSOR_UNITS_PSI, 471 472 TOPO_SENSOR_UNITS_NEWTON, 473 TOPO_SENSOR_UNITS_CFM, 474 TOPO_SENSOR_UNITS_RPM, 475 TOPO_SENSOR_UNITS_HZ, 476 TOPO_SENSOR_UNITS_MICROSEC, 477 TOPO_SENSOR_UNITS_MILLISEC, 478 TOPO_SENSOR_UNITS_SECS, 479 TOPO_SENSOR_UNITS_MIN, 480 TOPO_SENSOR_UNITS_HOUR, 481 TOPO_SENSOR_UNITS_DAY, 482 TOPO_SENSOR_UNITS_WEEK, 483 TOPO_SENSOR_UNITS_MIL, 484 TOPO_SENSOR_UNITS_INCHES, 485 TOPO_SENSOR_UNITS_FEET, 486 TOPO_SENSOR_UNITS_CUB_INCH, 487 TOPO_SENSOR_UNITS_CUB_FEET, 488 489 TOPO_SENSOR_UNITS_MM, 490 TOPO_SENSOR_UNITS_CM, 491 TOPO_SENSOR_UNITS_METERS, 492 TOPO_SENSOR_UNITS_CUB_CM, 493 TOPO_SENSOR_UNITS_CUB_METER, 494 TOPO_SENSOR_UNITS_LITERS, 495 TOPO_SENSOR_UNITS_FLUID_OUNCE, 496 TOPO_SENSOR_UNITS_RADIANS, 497 TOPO_SENSOR_UNITS_STERADIANS, 498 TOPO_SENSOR_UNITS_REVOLUTIONS, 499 TOPO_SENSOR_UNITS_CYCLES, 500 TOPO_SENSOR_UNITS_GRAVITIES, 501 TOPO_SENSOR_UNITS_OUNCE, 502 TOPO_SENSOR_UNITS_POUND, 503 TOPO_SENSOR_UNITS_FOOT_POUND, 504 TOPO_SENSOR_UNITS_OZ_INCH, 505 506 TOPO_SENSOR_UNITS_GAUSS, 507 TOPO_SENSOR_UNITS_GILBERTS, 508 TOPO_SENSOR_UNITS_HENRY, 509 TOPO_SENSOR_UNITS_MILHENRY, 510 TOPO_SENSOR_UNITS_FARAD, 511 TOPO_SENSOR_UNITS_MICROFARAD, 512 TOPO_SENSOR_UNITS_OHMS, 513 TOPO_SENSOR_UNITS_SIEMENS, 514 TOPO_SENSOR_UNITS_MOLE, 515 TOPO_SENSOR_UNITS_BECQUEREL, 516 TOPO_SENSOR_UNITS_PPM, 517 TOPO_SENSOR_UNITS_RESERVED1, 518 TOPO_SENSOR_UNITS_DECIBELS, 519 TOPO_SENSOR_UNITS_DBA, 520 TOPO_SENSOR_UNITS_DBC, 521 TOPO_SENSOR_UNITS_GRAY, 522 523 TOPO_SENSOR_UNITS_SIEVERT, 524 TOPO_SENSOR_UNITS_COLOR_TEMP_K, 525 TOPO_SENSOR_UNITS_BIT, 526 TOPO_SENSOR_UNITS_KILOBIT, 527 TOPO_SENSOR_UNITS_MEGABIT, 528 TOPO_SENSOR_UNITS_GIGABIT, 529 TOPO_SENSOR_UNITS_BYTE, 530 TOPO_SENSOR_UNITS_KILOBYTE, 531 TOPO_SENSOR_UNITS_MEGABYTE, 532 TOPO_SENSOR_UNITS_GIGABYTE, 533 TOPO_SENSOR_UNITS_WORD, 534 TOPO_SENSOR_UNITS_DWORD, 535 TOPO_SENSOR_UNITS_QWORD, 536 TOPO_SENSOR_UNITS_MEMLINE, 537 TOPO_SENSOR_UNITS_HIT, 538 TOPO_SENSOR_UNITS_MISS, 539 540 TOPO_SENSOR_UNITS_RETRY, 541 TOPO_SENSOR_UNITS_RESET, 542 TOPO_SENSOR_UNITS_OVERFLOW, 543 TOPO_SENSOR_UNITS_UNDERRUN, 544 TOPO_SENSOR_UNITS_COLLISION, 545 TOPO_SENSOR_UNITS_PACKETS, 546 TOPO_SENSOR_UNITS_MESSAGES, 547 TOPO_SENSOR_UNITS_CHARACTERS, 548 TOPO_SENSOR_UNITS_ERROR, 549 TOPO_SENSOR_UNITS_CE, 550 TOPO_SENSOR_UNITS_UE, 551 TOPO_SENSOR_UNITS_FATAL_ERROR, 552 TOPO_SENSOR_UNITS_GRAMS 553 } topo_sensor_unit_t; 554 555 /* 556 * These defines are used by the topo_method_sensor_failure to indicate 557 * whether the source of a sensor failure is believed to be the result of an 558 * internal failure, external condition or unknown 559 */ 560 #define TOPO_SENSOR_ERRSRC_UNKNOWN 0 561 #define TOPO_SENSOR_ERRSRC_INTERNAL 1 562 #define TOPO_SENSOR_ERRSRC_EXTERNAL 2 563 564 /* 565 * Sensor Types amd the associated sensor-type-specific states 566 * 567 * These are used to decode the type and state properties in the facility 568 * propgroup on facility nodes of type sensor. 569 * 570 * Again we're basically using the same defines as for IPMI as it's serves 571 * as a good starting point and simplifies the IPMI provider code. Of course 572 * other facility providers will need to convert from their native codes 573 * to the topo code when they set the type and state properties. 574 */ 575 #define TOPO_SENSOR_TYPE_RESERVED 0x0000 576 #define TOPO_SENSOR_TYPE_TEMP 0x0001 577 #define TOPO_SENSOR_TYPE_VOLTAGE 0x0002 578 #define TOPO_SENSOR_TYPE_CURRENT 0x0003 579 #define TOPO_SENSOR_TYPE_FAN 0x0004 580 #define TOPO_SENSOR_TYPE_PHYSICAL 0x0005 581 582 #define TOPO_SENSOR_STATE_PHYSICAL_GENERAL 0x0001 583 #define TOPO_SENSOR_STATE_PHYSICAL_BAY 0x0002 584 #define TOPO_SENSOR_STATE_PHYSICAL_CARD 0x0004 585 #define TOPO_SENSOR_STATE_PHYSICAL_PROCESSOR 0x0008 586 #define TOPO_SENSOR_STATE_PHYSICAL_LAN 0x0010 587 #define TOPO_SENSOR_STATE_PHYSICAL_DOCK 0x0020 588 #define TOPO_SENSOR_STATE_PHYSICAL_FAN 0x0040 589 590 #define TOPO_SENSOR_TYPE_PLATFORM 0x0006 591 592 #define TOPO_SENSOR_STATE_PLATFORM_SECURE 0x0001 593 #define TOPO_SENSOR_STATE_PLATFORM_USER_PASS 0x0002 594 #define TOPO_SENSOR_STATE_PLATFORM_SETUP_PASS 0x0004 595 #define TOPO_SENSOR_STATE_PLATFORM_NETWORK_PASS 0x0008 596 #define TOPO_SENSOR_STATE_PLATFORM_OTHER_PASS 0x0010 597 #define TOPO_SENSOR_STATE_PLATFORM_OUT_OF_BAND 0x0020 598 599 #define TOPO_SENSOR_TYPE_PROCESSOR 0x0007 600 601 #define TOPO_SENSOR_STATE_PROCESSOR_IERR 0x0001 602 #define TOPO_SENSOR_STATE_PROCESSOR_THERMAL 0x0002 603 #define TOPO_SENSOR_STATE_PROCESSOR_FRB1 0x0004 604 #define TOPO_SENSOR_STATE_PROCESSOR_FRB2 0x0008 605 #define TOPO_SENSOR_STATE_PROCESSOR_FRB3 0x0010 606 #define TOPO_SENSOR_STATE_PROCESSOR_CONFIG 0x0020 607 #define TOPO_SENSOR_STATE_PROCESSOR_SMBIOS 0x0040 608 #define TOPO_SENSOR_STATE_PROCESSOR_PRESENT 0x0080 609 #define TOPO_SENSOR_STATE_PROCESSOR_DISABLED 0x0100 610 #define TOPO_SENSOR_STATE_PROCESSOR_TERMINATOR 0x0200 611 #define TOPO_SENSOR_STATE_PROCESSOR_THROTTLED 0x0400 612 613 #define TOPO_SENSOR_TYPE_POWER_SUPPLY 0x0008 614 615 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PRESENT 0x0001 616 #define TOPO_SENSOR_STATE_POWER_SUPPLY_FAILURE 0x0002 617 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PREDFAIL 0x0004 618 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_LOST 0x0008 619 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE 0x0010 620 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE_PRES 0x0020 621 #define TOPO_SENSOR_STATE_POWER_SUPPLY_CONFIG_ERR 0x0040 622 623 #define TOPO_SENSOR_TYPE_POWER_UNIT 0x0009 624 625 #define TOPO_SENSOR_STATE_POWER_UNIT_OFF 0x0001 626 #define TOPO_SENSOR_STATE_POWER_UNIT_CYCLE 0x0002 627 #define TOPO_SENSOR_STATE_POWER_UNIT_240_DOWN 0x0004 628 #define TOPO_SENSOR_STATE_POWER_UNIT_INTERLOCK_DOWN 0x0008 629 #define TOPO_SENSOR_STATE_POWER_UNIT_AC_LOST 0x0010 630 #define TOPO_SENSOR_STATE_POWER_UNIT_SOFT_FAILURE 0x0020 631 #define TOPO_SENSOR_STATE_POWER_UNIT_FAIL 0x0040 632 #define TOPO_SENSOR_STATE_POWER_UNIT_PREDFAIL 0x0080 633 634 #define TOPO_SENSOR_TYPE_COOLING 0x000A 635 #define TOPO_SENSOR_TYPE_OTHER 0x000B 636 637 #define TOPO_SENSOR_TYPE_MEMORY 0x000C 638 639 #define TOPO_SENSOR_STATE_MEMORY_CE 0x0001 640 #define TOPO_SENSOR_STATE_MEMORY_UE 0x0002 641 #define TOPO_SENSOR_STATE_MEMORY_PARITY 0x0004 642 #define TOPO_SENSOR_STATE_MEMORY_SCRUB_FAIL 0x0008 643 #define TOPO_SENSOR_STATE_MEMORY_DISABLED 0x0010 644 #define TOPO_SENSOR_STATE_MEMORY_CE_LOG_LIMIT 0x0020 645 #define TOPO_SENSOR_STATE_MEMORY_PRESENT 0x0040 646 #define TOPO_SENSOR_STATE_MEMORY_CONFIG_ERR 0x0080 647 #define TOPO_SENSOR_STATE_MEMORY_SPARE 0x0100 648 #define TOPO_SENSOR_STATE_MEMORY_THROTTLED 0x0200 649 #define TOPO_SENSOR_STATE_MEMORY_OVERTEMP 0x0400 650 651 #define TOPO_SENSOR_TYPE_BAY 0x000D 652 653 #define TOPO_SENSOR_STATE_BAY_PRESENT 0x0001 654 #define TOPO_SENSOR_STATE_BAY_FAULT 0x0002 655 #define TOPO_SENSOR_STATE_BAY_PREDFAIL 0x0004 656 #define TOPO_SENSOR_STATE_BAY_SPARE 0x0008 657 #define TOPO_SENSOR_STATE_BAY_CHECK 0x0010 658 #define TOPO_SENSOR_STATE_BAY_CRITICAL 0x0020 659 #define TOPO_SENSOR_STATE_BAY_FAILED 0x0040 660 #define TOPO_SENSOR_STATE_BAY_REBUILDING 0x0080 661 #define TOPO_SENSOR_STATE_BAY_ABORTED 0x0100 662 663 #define TOPO_SENSOR_TYPE_POST_RESIZE 0x000E 664 665 #define TOPO_SENSOR_TYPE_FIRMWARE 0x000F 666 667 #define TOPO_SENSOR_STATE_FIRMWARE_ERROR 0x0001 668 #define TOPO_SENSOR_STATE_FIRMWARE_HANG 0x0002 669 #define TOPO_SENSOR_STATE_FIRMWARE_PROGRESS 0x0004 670 671 #define TOPO_SENSOR_TYPE_EVENT_LOG 0x0010 672 673 #define TOPO_SENSOR_STATE_EVENT_LOG_CE 0x0001 674 #define TOPO_SENSOR_STATE_EVENT_LOG_TYPE 0x0002 675 #define TOPO_SENSOR_STATE_EVENT_LOG_RESET 0x0004 676 #define TOPO_SENSOR_STATE_EVENT_LOG_ALL 0x0008 677 #define TOPO_SENSOR_STATE_EVENT_LOG_FULL 0x0010 678 #define TOPO_SENSOR_STATE_EVENT_LOG_ALMOST_FULL 0x0020 679 680 #define TOPO_SENSOR_TYPE_WATCHDOG1 0x0011 681 682 #define TOPO_SENSOR_STATE_WATCHDOG_BIOS_RESET 0x0001 683 #define TOPO_SENSOR_STATE_WATCHDOG_OS_RESET 0x0002 684 #define TOPO_SENSOR_STATE_WATCHDOG_OS_SHUTDOWN 0x0004 685 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_DOWN 0x0008 686 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_CYCLE 0x0010 687 #define TOPO_SENSOR_STATE_WATCHDOG_OS_NMI_DIAG 0x0020 688 #define TOPO_SENSOR_STATE_WATCHDOG_EXPIRED 0x0040 689 #define TOPO_SENSOR_STATE_WATCHDOG_PRE_TIMEOUT_INT 0x0080 690 691 #define TOPO_SENSOR_TYPE_SYSTEM 0x0012 692 693 #define TOPO_SENSOR_STATE_SYSTEM_RECONF 0x0001 694 #define TOPO_SENSOR_STATE_SYSTEM_BOOT 0x0002 695 #define TOPO_SENSOR_STATE_SYSTEM_UNKNOWN_HW_FAILURE 0x0004 696 #define TOPO_SENSOR_STATE_SYSTEM_AUX_LOG_UPDATED 0x0008 697 #define TOPO_SENSOR_STATE_SYSTEM_PEF_ACTION 0x0010 698 #define TOPO_SENSOR_STATE_SYSTEM_TIMETAMP_CLOCKSYNC 0x0020 699 700 #define TOPO_SENSOR_TYPE_CRITICAL 0x0013 701 702 #define TOPO_SENSOR_STATE_CRITICAL_EXT_NMI 0x0001 703 #define TOPO_SENSOR_STATE_CRITICAL_BUS_TIMEOUT 0x0002 704 #define TOPO_SENSOR_STATE_CRITICAL_IO_NMI 0x0004 705 #define TOPO_SENSOR_STATE_CRITICAL_SW_NMI 0x0008 706 #define TOPO_SENSOR_STATE_CRITICAL_PCI_PERR 0x0010 707 #define TOPO_SENSOR_STATE_CRITICAL_PCI_SERR 0x0020 708 #define TOPO_SENSOR_STATE_CRITICAL_EISA_FAILSAFE 0x0040 709 #define TOPO_SENSOR_STATE_CRITICAL_BUS_CE 0x0080 710 #define TOPO_SENSOR_STATE_CRITICAL_BUS_UE 0x0100 711 #define TOPO_SENSOR_STATE_CRITICAL_FATAL_NMI 0x0200 712 #define TOPO_SENSOR_STATE_CRITICAL_BUS_FATAL_ERR 0x0400 713 #define TOPO_SENSOR_STATE_CRITICAL_BUS_DEGRADED 0x0800 714 715 #define TOPO_SENSOR_TYPE_BUTTON 0x0014 716 717 #define TOPO_SENSOR_STATE_BUTTON_PWR 0x0001 718 #define TOPO_SENSOR_STATE_BUTTON_SLEEP 0x0002 719 #define TOPO_SENSOR_STATE_BUTTON_RESET 0x0004 720 #define TOPO_SENSOR_STATE_BUTTON_FRU_LATCH 0x0008 721 #define TOPO_SENSOR_STATE_BUTTON_FRU_SERVICE 0x0010 722 723 #define TOPO_SENSOR_TYPE_MODULE 0x0015 724 #define TOPO_SENSOR_TYPE_MICROCONTROLLER 0x0016 725 #define TOPO_SENSOR_TYPE_CARD 0x0017 726 #define TOPO_SENSOR_TYPE_CHASSIS 0x0018 727 728 #define TOPO_SENSOR_TYPE_CHIPSET 0x0019 729 730 #define TOPO_SENSOR_STATE_CHIPSET_PWR_CTL_FAIL 0x0001 731 732 #define TOPO_SENSOR_TYPE_FRU 0x001A 733 734 #define TOPO_SENSOR_TYPE_CABLE 0x001B 735 736 #define TOPO_SENSOR_STATE_CABLE_CONNECTED 0x0001 737 #define TOPO_SENSOR_STATE_CABLE_CONFIG_ERR 0x0002 738 739 #define TOPO_SENSOR_TYPE_TERMINATOR 0x001C 740 741 #define TOPO_SENSOR_TYPE_BOOT_STATE 0x001D 742 743 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_PWR_UP 0x0001 744 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_HARD_RESET 0x0002 745 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_WARM_RESET 0x0004 746 #define TOPO_SENSOR_STATE_BOOT_STATE_PXE_BOOT 0x0008 747 #define TOPO_SENSOR_STATE_BOOT_STATE_DIAG_BOOT 0x0010 748 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_HARD_RESET 0x0020 749 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_WARM_RESET 0x0040 750 #define TOPO_SENSOR_STATE_BOOT_STATE_SYS_RESTART 0x0080 751 752 #define TOPO_SENSOR_TYPE_BOOT_ERROR 0x001E 753 754 #define TOPO_SENSOR_STATE_BOOT_ERROR_NOMEDIA 0x0001 755 #define TOPO_SENSOR_STATE_BOOT_ERROR_NON_BOOTABLE_DISK 0x0002 756 #define TOPO_SENSOR_STATE_BOOT_ERROR_NO_PXE_SERVER 0x0004 757 #define TOPO_SENSOR_STATE_BOOT_ERROR_INV_BOOT_SECT 0x0008 758 #define TOPO_SENSOR_STATE_BOOT_ERROR_USR_SELECT_TIMEOUT 0x0010 759 760 #define TOPO_SENSOR_TYPE_BOOT_OS 0x001F 761 762 #define TOPO_SENSOR_STATE_BOOT_OS_A_DRV_BOOT_COMPLETE 0x0001 763 #define TOPO_SENSOR_STATE_BOOT_OS_C_DRV_BOOT_COMPLETE 0x0002 764 #define TOPO_SENSOR_STATE_BOOT_OS_PXE_BOOT_COMPLETE 0x0004 765 #define TOPO_SENSOR_STATE_BOOT_OS_DIAG_BOOT_COMPLETE 0x0008 766 #define TOPO_SENSOR_STATE_BOOT_OS_CDROM_BOOT_COMPLETE 0x0010 767 #define TOPO_SENSOR_STATE_BOOT_OS_ROM_BOOT_COMPLETE 0x0020 768 #define TOPO_SENSOR_STATE_BOOT_OS_UNSPEC_BOOT_COMPLETE 0x0040 769 770 #define TOPO_SENSOR_TYPE_OS_SHUTDOWN 0x0020 771 772 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_LOADING 0x0001 773 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_CRASH 0x0002 774 #define TOPO_SENSOR_STATE_OS_STOP_GRACEFUL 0x0004 775 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_GRACEFUL 0x0008 776 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_PEF 0x0010 777 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_BMC 0x0020 778 779 #define TOPO_SENSOR_TYPE_SLOT 0x0021 780 781 #define TOPO_SENSOR_STATE_SLOT_FAULT_ASSERTED 0x0001 782 #define TOPO_SENSOR_STATE_SLOT_IDENTIFY_ASSERTED 0x0002 783 #define TOPO_SENSOR_STATE_SLOT_CONNECTED 0x0004 784 #define TOPO_SENSOR_STATE_SLOT_INSTALL_READY 0x0008 785 #define TOPO_SENSOR_STATE_SLOT_REMOVE_READY 0x0010 786 #define TOPO_SENSOR_STATE_SLOT_PWR_OFF 0x0020 787 #define TOPO_SENSOR_STATE_SLOT_REMOVED 0x0040 788 #define TOPO_SENSOR_STATE_SLOT_INTERLOCK_ASSERTED 0x0080 789 #define TOPO_SENSOR_STATE_SLOT_DISABLED 0x0100 790 #define TOPO_SENSOR_STATE_SLOT_SPARE_DEVICE 0x0200 791 792 #define TOPO_SENSOR_TYPE_ACPI 0x0022 793 794 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S0_G0 0x0001 795 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1 0x0002 796 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S2 0x0004 797 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S3 0x0008 798 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4 0x0010 799 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_G2_SOFT_OFF 0x0020 800 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4_S5_SOFT_OFF 0x0040 801 #define TOPO_SENSOR_STATE_ACPI_PSATTE_G3_MECH_OFF 0x0080 802 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1_S2_S3_SLEEP 0x0100 803 #define TOPO_SENSOR_STATE_ACPI_PSTATE_G1_SLEEP 0x0200 804 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_OVERRIDE 0x0400 805 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_ON 0x0800 806 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_OFF 0x1000 807 #define TOPO_SENSOR_STATE_ACPI_PSTATE_UNKNOWN 0x2000 808 809 #define TOPO_SENSOR_TYPE_WATCHDOG2 0x0023 810 811 #define TOPO_SENSOR_STATE_WATCHDOG2_EXPIRED 0x0001 812 #define TOPO_SENSOR_STATE_WATCHDOG2_HARD_RESET 0x0002 813 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_DOWN 0x0004 814 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_CYCLE 0x0008 815 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED1 0x0010 816 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED2 0x0020 817 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED3 0x0040 818 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED4 0x0080 819 #define TOPO_SENSOR_STATE_WATCHDOG2_TIMEOUT_INT 0x0100 820 821 #define TOPO_SENSOR_TYPE_ALERT 0x0024 822 823 #define TOPO_SENSOR_STATE_ALERT_PLAT_PAGE 0x0001 824 #define TOPO_SENSOR_STATE_ALERT_PLAT_LAN_ALERT 0x0002 825 #define TOPO_SENSOR_STATE_ALERT_PLAT_EVT_TRAP 0x0004 826 #define TOPO_SENSOR_STATE_ALERT_PLAT_SNMP_TRAP 0x0008 827 828 #define TOPO_SENSOR_TYPE_PRESENCE 0x0025 829 830 #define TOPO_SENSOR_STATE_PRESENCE_PRESENT 0x0001 831 #define TOPO_SENSOR_STATE_PRESENCE_ABSENT 0x0002 832 #define TOPO_SENSOR_STATE_PRESENCE_DISABLED 0x0004 833 834 #define TOPO_SENSOR_TYPE_ASIC 0x0026 835 836 #define TOPO_SENSOR_TYPE_LAN 0x0027 837 838 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT_LOST 0x0001 839 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT 0x0002 840 841 #define TOPO_SENSOR_TYPE_HEALTH 0x0028 842 843 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_ACC_DEGRADED 0x0001 844 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_ACC_DEGRADED 0x0002 845 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_OFFLINE 0x0004 846 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_UNAVAIL 0x0008 847 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_FAILURE 0x0010 848 #define TOPO_SENSOR_STATE_HEALTH_FRU_FAILURE 0x0020 849 850 #define TOPO_SENSOR_TYPE_BATTERY 0x0029 851 852 #define TOPO_SENSOR_STATE_BATTERY_LOW 0x0001 853 #define TOPO_SENSOR_STATE_BATTERY_FAILED 0x0002 854 #define TOPO_SENSOR_STATE_BATTERY_PRESENCE 0x0004 855 856 #define TOPO_SENSOR_TYPE_AUDIT 0x002A 857 858 #define TOPO_SENSOR_STATE_AUDIT_SESSION_ACTIVATED 0x0001 859 #define TOPO_SENSOR_STATE_AUDIT_SESSION_DEACTIVATED 0x0002 860 861 #define TOPO_SENSOR_TYPE_VERSION 0x002B 862 863 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE 0x0001 864 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE 0x0002 865 #define TOPO_SENSOR_STATE_VERSION_HW_INCOMPATIBLE 0x0004 866 #define TOPO_SENSOR_STATE_VERSION_SW_INCOMPATIBLE 0x0008 867 #define TOPO_SENSOR_STATE_VERSION_HW_INVAL 0x0010 868 #define TOPO_SENSOR_STATE_VERSION_SW_INVAL 0x0020 869 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE_SUCCESS 0x0040 870 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE_SUCCESS 0x0080 871 872 #define TOPO_SENSOR_TYPE_FRU_STATE 0x002C 873 874 #define TOPO_SENSOR_STATE_FRU_STATE_NOT_INSTALLED 0x0001 875 #define TOPO_SENSOR_STATE_FRU_STATE_INACTIVE 0x0002 876 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_REQ 0x0004 877 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_INPROGRESS 0x0008 878 #define TOPO_SENSOR_STATE_FRU_STATE_ACTIVE 0x0010 879 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_REQ 0x0020 880 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_INPROGRESS 0x0040 881 #define TOPO_SENSOR_STATE_FRU_STATE_COMM_LOST 0x0080 882 883 /* 884 * We simplify the IPMI sensor type code defines by combining the generic 885 * and sensor-specific codes into a single range. Because there's overlap 886 * between the two ranges we offset the generic type codes by 0x0100 887 * which allows ample room in the hole for future expansion of the table to 888 * accomodate either additions to the IPMI spec or to support new sensor types 889 * for alternate provider modules. 890 */ 891 #define TOPO_SENSOR_TYPE_THRESHOLD_STATE 0x0101 892 893 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONCRIT 0x0001 894 #define TOPO_SENSOR_STATE_THRESH_LOWER_CRIT 0x0002 895 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONREC 0x0004 896 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONCRIT 0x0008 897 #define TOPO_SENSOR_STATE_THRESH_UPPER_CRIT 0x0010 898 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONREC 0x0020 899 900 #define TOPO_SENSOR_TYPE_GENERIC_USAGE 0x0102 901 902 #define TOPO_SENSOR_STATE_GENERIC_USAGE_IDLE 0x0001 903 #define TOPO_SENSOR_STATE_GENERIC_USAGE_ACTIVE 0x0002 904 #define TOPO_SENSOR_STATE_GENERIC_USAGE_BUSY 0x0004 905 906 #define TOPO_SENSOR_TYPE_GENERIC_STATE 0x0103 907 908 #define TOPO_SENSOR_STATE_GENERIC_STATE_DEASSERTED 0x0001 909 #define TOPO_SENSOR_STATE_GENERIC_STATE_ASSERTED 0x0002 910 911 #define TOPO_SENSOR_TYPE_GENERIC_PREDFAIL 0x0104 912 913 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_DEASSERTED 0x0001 914 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_ASSERTED 0x0002 915 916 #define TOPO_SENSOR_TYPE_GENERIC_LIMIT 0x0105 917 918 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_NOT_EXCEEDED 0x0001 919 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_EXCEEDED 0x0002 920 921 #define TOPO_SENSOR_TYPE_GENERIC_PERFORMANCE 0x0106 922 923 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_MET 0x0001 924 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_LAGS 0x0002 925 926 #define TOPO_SENSOR_TYPE_SEVERITY 0x0107 927 928 #define TOPO_SENSOR_STATE_SEVERITY_OK 0x0001 929 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_HIGH 0x0002 930 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_HIGH 0x0004 931 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_HIGH 0x0008 932 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_LOW 0x0010 933 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_LOW 0x0020 934 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_LOW 0x0020 935 #define TOPO_SENSOR_STATE_SEVERITY_MONITOR 0x0040 936 #define TOPO_SENSOR_STATE_SEVERITY_INFORMATIONAL 0x0080 937 938 #define TOPO_SENSOR_TYPE_GENERIC_PRESENCE 0x0108 939 940 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_DEASSERTED 0x0001 941 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_ASSERTED 0x0002 942 943 #define TOPO_SENSOR_TYPE_GENERIC_AVAILABILITY 0x0109 944 945 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_DEASSERTED 0x0001 946 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_ASSERTED 0x0002 947 948 #define TOPO_SENSOR_TYPE_GENERIC_STATUS 0x010A 949 950 #define TOPO_SENSOR_STATE_GENERIC_STATUS_RUNNING 0x0001 951 #define TOPO_SENSOR_STATE_GENERIC_STATUS_IN_TEST 0x0002 952 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_OFF 0x0004 953 #define TOPO_SENSOR_STATE_GENERIC_STATUS_ONLINE 0x0008 954 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFFLINE 0x0010 955 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFF_DUTY 0x0020 956 #define TOPO_SENSOR_STATE_GENERIC_STATUS_DEGRADED 0x0040 957 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_SAVE 0x0080 958 #define TOPO_SENSOR_STATE_GENERIC_STATUS_INSTALL_ERR 0x0100 959 960 #define TOPO_SENSOR_TYPE_GENERIC_REDUNDANCY 0x010B 961 962 /* 963 * ACPI power state 964 */ 965 #define TOPO_SENSOR_TYPE_GENERIC_ACPI 0x010C 966 967 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D0 0x0001 968 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D1 0x0002 969 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D2 0x0004 970 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D3 0x0008 971 972 /* 973 * These sensor types don't exist in the IPMI spec, but allow consumers to 974 * associate discrete sensors with component failure. The 'ok' sensor is the 975 * inverse of the 'failure' sensor. Note that the values intentionally mimic 976 * TOPO_SENSOR_TYPE_GENERIC_STATE, so that you can use existing IPMI sensors 977 * but just change the type to get semantically meaningful behavior. 978 */ 979 #define TOPO_SENSOR_TYPE_GENERIC_FAILURE 0x010D 980 981 #define TOPO_SENSOR_STATE_GENERIC_FAIL_DEASSERTED 0x0001 982 #define TOPO_SENSOR_STATE_GENERIC_FAIL_NONRECOV 0x0002 983 #define TOPO_SENSOR_STATE_GENERIC_FAIL_CRITICAL 0x0004 984 985 #define TOPO_SENSOR_TYPE_GENERIC_OK 0x010E 986 987 #define TOPO_SENSOR_STATE_GENERIC_OK_DEASSERTED 0x0001 988 #define TOPO_SENSOR_STATE_GENERIC_OK_ASSERTED 0x0002 989 990 /* 991 * Indicator modes and types 992 */ 993 typedef enum topo_led_state { 994 TOPO_LED_STATE_OFF = 0, 995 TOPO_LED_STATE_ON 996 } topo_led_state_t; 997 998 #define TOPO_FAC_TYPE_ANY 0xFFFFFFFF 999 1000 /* 1001 * This list is limited to the set of LED's that we're likely to manage through 1002 * FMA. Thus is does not include things like power or activity LED's 1003 */ 1004 typedef enum topo_led_type { 1005 TOPO_LED_TYPE_SERVICE = 0, 1006 TOPO_LED_TYPE_LOCATE, 1007 TOPO_LED_TYPE_OK2RM, 1008 TOPO_LED_TYPE_PRESENT 1009 } topo_led_type_t; 1010 1011 typedef enum topo_slot_type { 1012 TOPO_SLOT_TYPE_DIMM = 1 1013 } topo_slot_type_t; 1014 1015 1016 #ifdef __cplusplus 1017 } 1018 #endif 1019 1020 #endif /* _LIBTOPO_H */ 1021