1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _LIBTOPO_H 28 #define _LIBTOPO_H 29 30 #include <sys/nvpair.h> 31 #include <stdio.h> 32 33 #ifdef __cplusplus 34 extern "C" { 35 #endif 36 37 #define TOPO_VERSION 1 /* Library ABI Interface Version */ 38 39 typedef struct topo_hdl topo_hdl_t; 40 typedef struct topo_node tnode_t; 41 typedef struct topo_walk topo_walk_t; 42 typedef int32_t topo_instance_t; 43 typedef uint32_t topo_version_t; 44 45 typedef struct topo_list { 46 struct topo_list *l_prev; 47 struct topo_list *l_next; 48 } topo_list_t; 49 50 typedef struct topo_faclist { 51 topo_list_t tf_list; 52 tnode_t *tf_node; 53 } topo_faclist_t; 54 55 /* 56 * The following functions, error codes and data structures are private 57 * to libtopo snapshot consumers and enumerator modules. 58 */ 59 extern topo_hdl_t *topo_open(int, const char *, int *); 60 extern void topo_close(topo_hdl_t *); 61 extern char *topo_snap_hold(topo_hdl_t *, const char *, int *); 62 extern void topo_snap_release(topo_hdl_t *); 63 64 /* 65 * Snapshot walker support 66 */ 67 typedef int (*topo_walk_cb_t)(topo_hdl_t *, tnode_t *, void *); 68 69 extern topo_walk_t *topo_walk_init(topo_hdl_t *, const char *, topo_walk_cb_t, 70 void *, int *); 71 extern int topo_walk_step(topo_walk_t *, int); 72 extern void topo_walk_fini(topo_walk_t *); 73 74 /* 75 * Walk status returned from walker 76 */ 77 #define TOPO_WALK_ERR -1 78 #define TOPO_WALK_NEXT 0 79 #define TOPO_WALK_TERMINATE 1 80 81 /* 82 * Types of walks: depth-first (child) or breadth-first (sibling) 83 */ 84 #define TOPO_WALK_CHILD 0x0001 85 #define TOPO_WALK_SIBLING 0x0002 86 87 /* 88 * FMRI helper routines 89 */ 90 extern int topo_fmri_present(topo_hdl_t *, nvlist_t *, int *); 91 extern int topo_fmri_replaced(topo_hdl_t *, nvlist_t *, int *); 92 extern int topo_fmri_contains(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 93 extern int topo_fmri_expand(topo_hdl_t *, nvlist_t *, int *); 94 extern int topo_fmri_unusable(topo_hdl_t *, nvlist_t *, int *); 95 extern int topo_fmri_service_state(topo_hdl_t *, nvlist_t *, int *); 96 extern int topo_fmri_nvl2str(topo_hdl_t *, nvlist_t *, char **, int *); 97 extern int topo_fmri_str2nvl(topo_hdl_t *, const char *, nvlist_t **, int *); 98 extern int topo_fmri_asru(topo_hdl_t *, nvlist_t *, nvlist_t **, int *); 99 extern int topo_fmri_fru(topo_hdl_t *, nvlist_t *, nvlist_t **, 100 int *); 101 extern int topo_fmri_label(topo_hdl_t *, nvlist_t *, char **, int *); 102 extern int topo_fmri_serial(topo_hdl_t *, nvlist_t *, char **, int *); 103 extern int topo_fmri_compare(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 104 extern int topo_fmri_facility(topo_hdl_t *, nvlist_t *, const char *, 105 uint32_t, topo_walk_cb_t, void *, int *); 106 107 /* 108 * Private utility functions for fmd 109 */ 110 extern ulong_t topo_fmri_strhash(topo_hdl_t *, const char *); 111 extern boolean_t topo_fmri_strcmp(topo_hdl_t *, const char *, const char *); 112 113 /* 114 * Topo node utilities: callable from topo_walk_step() callback or module 115 * enumeration, topo_mod_enumerate() 116 */ 117 extern char *topo_node_name(tnode_t *); 118 extern topo_instance_t topo_node_instance(tnode_t *); 119 extern tnode_t *topo_node_parent(tnode_t *); 120 extern void *topo_node_private(tnode_t *); 121 extern int topo_node_flags(tnode_t *); 122 extern int topo_node_asru(tnode_t *, nvlist_t **, nvlist_t *, int *); 123 extern int topo_node_fru(tnode_t *, nvlist_t **, nvlist_t *, int *); 124 extern int topo_node_resource(tnode_t *, nvlist_t **, int *); 125 extern int topo_node_label(tnode_t *, char **, int *); 126 extern int topo_method_invoke(tnode_t *node, const char *, topo_version_t, 127 nvlist_t *, nvlist_t **, int *); 128 extern boolean_t topo_method_supported(tnode_t *, const char *, 129 topo_version_t); 130 extern int topo_node_facility(topo_hdl_t *, tnode_t *, const char *, 131 uint32_t, topo_faclist_t *, int *); 132 133 /* 134 * Node flags: denotes type of node 135 */ 136 #define TOPO_NODE_DEFAULT 0 137 #define TOPO_NODE_FACILITY 1 138 139 #define TOPO_FAC_TYPE_SENSOR "sensor" 140 #define TOPO_FAC_TYPE_INDICATOR "indicator" 141 142 /* 143 * Topo property get functions 144 */ 145 extern int topo_prop_get_int32(tnode_t *, const char *, const char *, 146 int32_t *, int *); 147 extern int topo_prop_get_uint32(tnode_t *, const char *, const char *, 148 uint32_t *, int *); 149 extern int topo_prop_get_int64(tnode_t *, const char *, const char *, 150 int64_t *, int *); 151 extern int topo_prop_get_uint64(tnode_t *, const char *, const char *, 152 uint64_t *, int *); 153 extern int topo_prop_get_double(tnode_t *, const char *, const char *, 154 double *, int *); 155 extern int topo_prop_get_string(tnode_t *, const char *, const char *, 156 char **, int *); 157 extern int topo_prop_get_fmri(tnode_t *, const char *, const char *, 158 nvlist_t **, int *); 159 extern int topo_prop_get_int32_array(tnode_t *, const char *, const char *, 160 int32_t **, uint_t *, int *); 161 extern int topo_prop_get_uint32_array(tnode_t *, const char *, const char *, 162 uint32_t **, uint_t *, int *); 163 extern int topo_prop_get_int64_array(tnode_t *, const char *, const char *, 164 int64_t **, uint_t *, int *); 165 extern int topo_prop_get_uint64_array(tnode_t *, const char *, const char *, 166 uint64_t **, uint_t *, int *); 167 extern int topo_prop_get_string_array(tnode_t *, const char *, const char *, 168 char ***, uint_t *, int *); 169 extern int topo_prop_get_fmri_array(tnode_t *, const char *, const char *, 170 nvlist_t ***, uint_t *, int *); 171 172 /* 173 * Topo property set functions 174 */ 175 extern int topo_prop_set_int32(tnode_t *, const char *, const char *, int, 176 int32_t, int *); 177 extern int topo_prop_set_uint32(tnode_t *, const char *, const char *, int, 178 uint32_t, int *); 179 extern int topo_prop_set_int64(tnode_t *, const char *, const char *, 180 int, int64_t, int *); 181 extern int topo_prop_set_uint64(tnode_t *, const char *, const char *, 182 int, uint64_t, int *); 183 extern int topo_prop_set_double(tnode_t *, const char *, const char *, 184 int, double, int *); 185 extern int topo_prop_set_string(tnode_t *, const char *, const char *, 186 int, const char *, int *); 187 extern int topo_prop_set_fmri(tnode_t *, const char *, const char *, 188 int, const nvlist_t *, int *); 189 extern int topo_prop_set_int32_array(tnode_t *, const char *, const char *, int, 190 int32_t *, uint_t, int *); 191 extern int topo_prop_set_uint32_array(tnode_t *, const char *, const char *, 192 int, uint32_t *, uint_t, int *); 193 extern int topo_prop_set_int64_array(tnode_t *, const char *, const char *, 194 int, int64_t *, uint_t, int *); 195 extern int topo_prop_set_uint64_array(tnode_t *, const char *, const char *, 196 int, uint64_t *, uint_t, int *); 197 extern int topo_prop_set_string_array(tnode_t *, const char *, const char *, 198 int, const char **, uint_t, int *); 199 extern int topo_prop_set_fmri_array(tnode_t *, const char *, const char *, 200 int, const nvlist_t **, uint_t, int *); 201 202 #define TOPO_PROP_IMMUTABLE 0 203 #define TOPO_PROP_MUTABLE 1 204 205 /* Protocol property group and property names */ 206 #define TOPO_PGROUP_PROTOCOL "protocol" /* Required property group */ 207 #define TOPO_PROP_RESOURCE "resource" /* resource FMRI */ 208 #define TOPO_PROP_ASRU "ASRU" /* ASRU FMRI */ 209 #define TOPO_PROP_FRU "FRU" /* FRU FMRI */ 210 #define TOPO_PROP_MOD "module" /* software module FMRI */ 211 #define TOPO_PROP_PKG "package" /* software package FMRI */ 212 #define TOPO_PROP_LABEL "label" /* property LABEL */ 213 214 #define TOPO_METH_FAC_ENUM "fac_enum" 215 216 /* 217 * System property group 218 */ 219 #define TOPO_PGROUP_SYSTEM "system" 220 #define TOPO_PROP_ISA "isa" 221 #define TOPO_PROP_MACHINE "machine" 222 223 /* 224 * These enum definitions are used to define a set of error tags associated with 225 * libtopo error conditions occuring during the adminstration of 226 * properties, invocation of methods and fmri-based queries. The shell script 227 * mkerror.sh is used to parse this file and create a corresponding topo_error.c 228 * source file. 229 * 230 * If you do something other than add a new error tag here, you may need to 231 * update the mkerror shell script as it is based upon simple regexps. 232 */ 233 typedef enum topo_prop_errno { 234 ETOPO_PROP_UNKNOWN = 3000, /* unknown topo prop error */ 235 ETOPO_PROP_NOENT, /* undefined property or property group */ 236 ETOPO_PROP_DEFD, /* static property already defined */ 237 ETOPO_PROP_NOMEM, /* memory limit exceeded during property allocation */ 238 ETOPO_PROP_TYPE, /* invalid property type */ 239 ETOPO_PROP_NAME, /* invalid property name */ 240 ETOPO_PROP_NOINHERIT, /* can not inherit property */ 241 ETOPO_PROP_NVL, /* malformed property nvlist */ 242 ETOPO_PROP_METHOD, /* get property method failed */ 243 ETOPO_PROP_END /* end of prop errno list (to ease auto-merge) */ 244 } topo_prop_errno_t; 245 246 typedef enum topo_method_errno { 247 ETOPO_METHOD_UNKNOWN = 3100, /* unknown topo method error */ 248 ETOPO_METHOD_INVAL, /* invalid method registration */ 249 ETOPO_METHOD_NOTSUP, /* method not supported */ 250 ETOPO_METHOD_FAIL, /* method failed */ 251 ETOPO_METHOD_VEROLD, /* app is compiled to use obsolete method */ 252 ETOPO_METHOD_VERNEW, /* app is compiled to use obsolete method */ 253 ETOPO_METHOD_NOMEM, /* memory limit exceeded during method op */ 254 ETOPO_METHOD_DEFD, /* method op already defined */ 255 ETOPO_METHOD_END /* end of method errno list */ 256 } topo_method_errno_t; 257 258 typedef enum topo_fmri_errno { 259 ETOPO_FMRI_UNKNOWN = 3200, /* unknown topo fmri error */ 260 ETOPO_FMRI_NVL, /* nvlist allocation failure for FMRI */ 261 ETOPO_FMRI_VERSION, /* invalid FMRI scheme version */ 262 ETOPO_FMRI_MALFORM, /* malformed FMRI */ 263 ETOPO_FMRI_NOMEM, /* memory limit exceeded */ 264 ETOPO_FMRI_END /* end of fmri errno list */ 265 } topo_fmri_errno_t; 266 267 typedef enum topo_hdl_errno { 268 ETOPO_HDL_UNKNOWN = 3300, /* unknown topo handle error */ 269 ETOPO_HDL_ABIVER, /* handle opened with invalid ABI version */ 270 ETOPO_HDL_SNAP, /* snapshot already taken */ 271 ETOPO_HDL_INVAL, /* invalid argument specified */ 272 ETOPO_HDL_UUID, /* uuid already set */ 273 ETOPO_HDL_NOMEM, /* memory limit exceeded */ 274 ETOPO_HDL_END /* end of handle errno list */ 275 } topo_hdl_errno_t; 276 277 extern const char *topo_strerror(int); 278 extern void topo_hdl_strfree(topo_hdl_t *, char *); 279 extern void topo_debug_set(topo_hdl_t *, const char *, const char *); 280 281 /* 282 * The following functions and data structures to support property 283 * observability are private to the fmtopo command. 284 */ 285 286 /* 287 * Each topology node advertises the name and data stability of each of its 288 * modules and properties. (see attributes(5)). 289 */ 290 291 /* 292 * Topo stability attributes 293 */ 294 typedef enum topo_stability { 295 TOPO_STABILITY_UNKNOWN = 0, /* private to libtopo */ 296 TOPO_STABILITY_INTERNAL, /* private to libtopo */ 297 TOPO_STABILITY_PRIVATE, /* private to Sun */ 298 TOPO_STABILITY_OBSOLETE, /* scheduled for removal */ 299 TOPO_STABILITY_EXTERNAL, /* not controlled by Sun */ 300 TOPO_STABILITY_UNSTABLE, /* new or rapidly changing */ 301 TOPO_STABILITY_EVOLVING, /* less rapidly changing */ 302 TOPO_STABILITY_STABLE, /* mature interface from Sun */ 303 TOPO_STABILITY_STANDARD /* industry standard */ 304 } topo_stability_t; 305 306 #define TOPO_STABILITY_MAX TOPO_STABILITY_STANDARD /* max valid stab */ 307 308 typedef struct topo_pgroup_info { 309 const char *tpi_name; /* property group name */ 310 topo_stability_t tpi_namestab; /* stability of group name */ 311 topo_stability_t tpi_datastab; /* stability of all property values */ 312 topo_version_t tpi_version; /* version of pgroup definition */ 313 } topo_pgroup_info_t; 314 315 extern topo_stability_t topo_name2stability(const char *); 316 extern const char *topo_stability2name(topo_stability_t); 317 extern void topo_pgroup_destroy(tnode_t *, const char *); 318 extern topo_pgroup_info_t *topo_pgroup_info(tnode_t *, const char *, int *); 319 320 typedef enum { 321 TOPO_TYPE_INVALID = 0, 322 TOPO_TYPE_BOOLEAN, /* boolean */ 323 TOPO_TYPE_INT32, /* int32_t */ 324 TOPO_TYPE_UINT32, /* uint32_t */ 325 TOPO_TYPE_INT64, /* int64_t */ 326 TOPO_TYPE_UINT64, /* uint64_t */ 327 TOPO_TYPE_STRING, /* const char* */ 328 TOPO_TYPE_TIME, /* uint64_t */ 329 TOPO_TYPE_SIZE, /* uint64_t */ 330 TOPO_TYPE_FMRI, /* nvlist_t */ 331 TOPO_TYPE_INT32_ARRAY, /* array of int32_t */ 332 TOPO_TYPE_UINT32_ARRAY, /* array of uint32_t */ 333 TOPO_TYPE_INT64_ARRAY, /* array of int64_t */ 334 TOPO_TYPE_UINT64_ARRAY, /* array of uint64_t */ 335 TOPO_TYPE_STRING_ARRAY, /* array of const char* */ 336 TOPO_TYPE_FMRI_ARRAY, /* array of nvlist_t */ 337 TOPO_TYPE_DOUBLE /* double */ 338 } topo_type_t; 339 340 extern nvlist_t *topo_prop_getprops(tnode_t *, int *err); 341 extern int topo_prop_getprop(tnode_t *, const char *, const char *, 342 nvlist_t *, nvlist_t **, int *); 343 extern int topo_prop_getpgrp(tnode_t *, const char *, nvlist_t **, int *); 344 extern int topo_prop_setprop(tnode_t *, const char *, nvlist_t *, 345 int, nvlist_t *, int *); 346 extern int topo_fmri_getprop(topo_hdl_t *, nvlist_t *, const char *, 347 const char *, nvlist_t *, nvlist_t **, int *); 348 extern int topo_fmri_getpgrp(topo_hdl_t *, nvlist_t *, const char *, 349 nvlist_t **, int *); 350 extern int topo_fmri_setprop(topo_hdl_t *, nvlist_t *, const char *, 351 nvlist_t *, int, nvlist_t *, int *); 352 353 /* Property node NVL names used in topo_prop_getprops */ 354 #define TOPO_PROP_GROUP "property-group" 355 #define TOPO_PROP_GROUP_NAME "property-group-name" 356 #define TOPO_PROP_GROUP_DSTAB "property-group-data-stability" 357 #define TOPO_PROP_GROUP_NSTAB "property-group-name-stability" 358 #define TOPO_PROP_GROUP_VERSION "property-group-version" 359 #define TOPO_PROP_VAL "property" 360 #define TOPO_PROP_VAL_NAME "property-name" 361 #define TOPO_PROP_VAL_VAL "property-value" 362 #define TOPO_PROP_VAL_TYPE "property-type" 363 #define TOPO_PROP_FLAG "property-flag" 364 365 /* 366 * ARGS list used in topo property methods 367 */ 368 #define TOPO_PROP_ARGS "args" 369 #define TOPO_PROP_PARGS "private-args" 370 371 extern int topo_xml_print(topo_hdl_t *, FILE *, const char *scheme, int *); 372 373 extern void *topo_hdl_alloc(topo_hdl_t *, size_t); 374 extern void *topo_hdl_zalloc(topo_hdl_t *, size_t); 375 extern void topo_hdl_free(topo_hdl_t *, void *, size_t); 376 extern int topo_hdl_nvalloc(topo_hdl_t *, nvlist_t **, uint_t); 377 extern int topo_hdl_nvdup(topo_hdl_t *, nvlist_t *, nvlist_t **); 378 extern char *topo_hdl_strdup(topo_hdl_t *, const char *); 379 380 /* 381 * Interfaces for converting sensor/indicator types, units, states, etc to 382 * a string 383 */ 384 void topo_sensor_type_name(uint32_t type, char *buf, size_t len); 385 void topo_sensor_units_name(uint8_t type, char *buf, size_t len); 386 void topo_led_type_name(uint8_t type, char *buf, size_t len); 387 void topo_led_state_name(uint8_t type, char *buf, size_t len); 388 void topo_sensor_state_name(uint32_t sensor_type, uint8_t state, char *buf, 389 size_t len); 390 391 /* 392 * Defines for standard properties for sensors and indicators 393 */ 394 #define TOPO_PGROUP_FACILITY "facility" 395 396 #define TOPO_SENSOR_READING "reading" 397 #define TOPO_SENSOR_STATE "state" 398 #define TOPO_SENSOR_CLASS "sensor-class" 399 #define TOPO_FACILITY_TYPE "type" 400 #define TOPO_SENSOR_UNITS "units" 401 #define TOPO_LED_MODE "mode" 402 403 /* 404 * Sensor Classes 405 * 406 * The "sensor-class" property in the "facility" propgroup on 407 * facility nodes of type "sensor" should be set to one of these 408 * two values. 409 * 410 * Threshold sensors provide an analog sensor reading via the 411 * "reading" property in the facility propgroup. They will also 412 * provide one or more discrete states via the "state" property 413 * in the facility propgroup. 414 * 415 * Discrete sensors will not provide an analog reading by will 416 * provide one or more discrete states via the "state" property 417 * in the facility propgroup. 418 */ 419 #define TOPO_SENSOR_CLASS_THRESHOLD "threshold" 420 #define TOPO_SENSOR_CLASS_DISCRETE "discrete" 421 422 /* 423 * Sensor unit types. We're using the unit types and corresponding 424 * codes described in the IPMI 2.0 spec as a reference as it seems to be a 425 * reasonably comprehensive list. This also simplifies the IPMI provider code 426 * since the unit type codes will map exactly to what libtopo uses (so no 427 * conversion necessary). 428 */ 429 typedef enum topo_sensor_unit { 430 TOPO_SENSOR_UNITS_UNSPECIFIED = 0, 431 TOPO_SENSOR_UNITS_DEGREES_C, 432 TOPO_SENSOR_UNITS_DEGREES_F, 433 TOPO_SENSOR_UNITS_DEGREES_K, 434 TOPO_SENSOR_UNITS_VOLTS, 435 TOPO_SENSOR_UNITS_AMPS, 436 TOPO_SENSOR_UNITS_WATTS, 437 TOPO_SENSOR_UNITS_JOULES, 438 TOPO_SENSOR_UNITS_COULOMBS, 439 TOPO_SENSOR_UNITS_VA, 440 TOPO_SENSOR_UNITS_NITS, 441 TOPO_SENSOR_UNITS_LUMEN, 442 TOPO_SENSOR_UNITS_LUX, 443 TOPO_SENSOR_UNITS_CANDELA, 444 TOPO_SENSOR_UNITS_KPA, 445 TOPO_SENSOR_UNITS_PSI, 446 447 TOPO_SENSOR_UNITS_NEWTON, 448 TOPO_SENSOR_UNITS_CFM, 449 TOPO_SENSOR_UNITS_RPM, 450 TOPO_SENSOR_UNITS_HZ, 451 TOPO_SENSOR_UNITS_MICROSEC, 452 TOPO_SENSOR_UNITS_MILLISEC, 453 TOPO_SENSOR_UNITS_SECS, 454 TOPO_SENSOR_UNITS_MIN, 455 TOPO_SENSOR_UNITS_HOUR, 456 TOPO_SENSOR_UNITS_DAY, 457 TOPO_SENSOR_UNITS_WEEK, 458 TOPO_SENSOR_UNITS_MIL, 459 TOPO_SENSOR_UNITS_INCHES, 460 TOPO_SENSOR_UNITS_FEET, 461 TOPO_SENSOR_UNITS_CUB_INCH, 462 TOPO_SENSOR_UNITS_CUB_FEET, 463 464 TOPO_SENSOR_UNITS_MM, 465 TOPO_SENSOR_UNITS_CM, 466 TOPO_SENSOR_UNITS_METERS, 467 TOPO_SENSOR_UNITS_CUB_CM, 468 TOPO_SENSOR_UNITS_CUB_METER, 469 TOPO_SENSOR_UNITS_LITERS, 470 TOPO_SENSOR_UNITS_FLUID_OUNCE, 471 TOPO_SENSOR_UNITS_RADIANS, 472 TOPO_SENSOR_UNITS_STERADIANS, 473 TOPO_SENSOR_UNITS_REVOLUTIONS, 474 TOPO_SENSOR_UNITS_CYCLES, 475 TOPO_SENSOR_UNITS_GRAVITIES, 476 TOPO_SENSOR_UNITS_OUNCE, 477 TOPO_SENSOR_UNITS_POUND, 478 TOPO_SENSOR_UNITS_FOOT_POUND, 479 TOPO_SENSOR_UNITS_OZ_INCH, 480 481 TOPO_SENSOR_UNITS_GAUSS, 482 TOPO_SENSOR_UNITS_GILBERTS, 483 TOPO_SENSOR_UNITS_HENRY, 484 TOPO_SENSOR_UNITS_MILHENRY, 485 TOPO_SENSOR_UNITS_FARAD, 486 TOPO_SENSOR_UNITS_MICROFARAD, 487 TOPO_SENSOR_UNITS_OHMS, 488 TOPO_SENSOR_UNITS_SIEMENS, 489 TOPO_SENSOR_UNITS_MOLE, 490 TOPO_SENSOR_UNITS_BECQUEREL, 491 TOPO_SENSOR_UNITS_PPM, 492 TOPO_SENSOR_UNITS_RESERVED1, 493 TOPO_SENSOR_UNITS_DECIBELS, 494 TOPO_SENSOR_UNITS_DBA, 495 TOPO_SENSOR_UNITS_DBC, 496 TOPO_SENSOR_UNITS_GRAY, 497 498 TOPO_SENSOR_UNITS_SIEVERT, 499 TOPO_SENSOR_UNITS_COLOR_TEMP_K, 500 TOPO_SENSOR_UNITS_BIT, 501 TOPO_SENSOR_UNITS_KILOBIT, 502 TOPO_SENSOR_UNITS_MEGABIT, 503 TOPO_SENSOR_UNITS_GIGABIT, 504 TOPO_SENSOR_UNITS_BYTE, 505 TOPO_SENSOR_UNITS_KILOBYTE, 506 TOPO_SENSOR_UNITS_MEGABYTE, 507 TOPO_SENSOR_UNITS_GIGABYTE, 508 TOPO_SENSOR_UNITS_WORD, 509 TOPO_SENSOR_UNITS_DWORD, 510 TOPO_SENSOR_UNITS_QWORD, 511 TOPO_SENSOR_UNITS_MEMLINE, 512 TOPO_SENSOR_UNITS_HIT, 513 TOPO_SENSOR_UNITS_MISS, 514 515 TOPO_SENSOR_UNITS_RETRY, 516 TOPO_SENSOR_UNITS_RESET, 517 TOPO_SENSOR_UNITS_OVERFLOW, 518 TOPO_SENSOR_UNITS_UNDERRUN, 519 TOPO_SENSOR_UNITS_COLLISION, 520 TOPO_SENSOR_UNITS_PACKETS, 521 TOPO_SENSOR_UNITS_MESSAGES, 522 TOPO_SENSOR_UNITS_CHARACTERS, 523 TOPO_SENSOR_UNITS_ERROR, 524 TOPO_SENSOR_UNITS_CE, 525 TOPO_SENSOR_UNITS_UE, 526 TOPO_SENSOR_UNITS_FATAL_ERROR, 527 TOPO_SENSOR_UNITS_GRAMS 528 } topo_sensor_unit_t; 529 530 /* 531 * Sensor Types amd the associated sensor-type-specific states 532 * 533 * These are used to decode the type and state properties in the facility 534 * propgroup on facility nodes of type sensor. 535 * 536 * Again we're basically using the same defines as for IPMI as it's serves 537 * as a good starting point and simplifies the IPMI provider code. Of course 538 * other facility providers will need to convert from their native codes 539 * to the topo code when they set the type and state properties. 540 */ 541 #define TOPO_SENSOR_TYPE_RESERVED 0x0000 542 #define TOPO_SENSOR_TYPE_TEMP 0x0001 543 #define TOPO_SENSOR_TYPE_VOLTAGE 0x0002 544 #define TOPO_SENSOR_TYPE_CURRENT 0x0003 545 #define TOPO_SENSOR_TYPE_FAN 0x0004 546 #define TOPO_SENSOR_TYPE_PHYSICAL 0x0005 547 548 #define TOPO_SENSOR_STATE_PHYSICAL_GENERAL 0x0001 549 #define TOPO_SENSOR_STATE_PHYSICAL_BAY 0x0002 550 #define TOPO_SENSOR_STATE_PHYSICAL_CARD 0x0004 551 #define TOPO_SENSOR_STATE_PHYSICAL_PROCESSOR 0x0008 552 #define TOPO_SENSOR_STATE_PHYSICAL_LAN 0x0010 553 #define TOPO_SENSOR_STATE_PHYSICAL_DOCK 0x0020 554 #define TOPO_SENSOR_STATE_PHYSICAL_FAN 0x0040 555 556 #define TOPO_SENSOR_TYPE_PLATFORM 0x0006 557 558 #define TOPO_SENSOR_STATE_PLATFORM_SECURE 0x0001 559 #define TOPO_SENSOR_STATE_PLATFORM_USER_PASS 0x0002 560 #define TOPO_SENSOR_STATE_PLATFORM_SETUP_PASS 0x0004 561 #define TOPO_SENSOR_STATE_PLATFORM_NETWORK_PASS 0x0008 562 #define TOPO_SENSOR_STATE_PLATFORM_OTHER_PASS 0x0010 563 #define TOPO_SENSOR_STATE_PLATFORM_OUT_OF_BAND 0x0020 564 565 #define TOPO_SENSOR_TYPE_PROCESSOR 0x0007 566 567 #define TOPO_SENSOR_STATE_PROCESSOR_IERR 0x0001 568 #define TOPO_SENSOR_STATE_PROCESSOR_THERMAL 0x0002 569 #define TOPO_SENSOR_STATE_PROCESSOR_FRB1 0x0004 570 #define TOPO_SENSOR_STATE_PROCESSOR_FRB2 0x0008 571 #define TOPO_SENSOR_STATE_PROCESSOR_FRB3 0x0010 572 #define TOPO_SENSOR_STATE_PROCESSOR_CONFIG 0x0020 573 #define TOPO_SENSOR_STATE_PROCESSOR_SMBIOS 0x0040 574 #define TOPO_SENSOR_STATE_PROCESSOR_PRESENT 0x0080 575 #define TOPO_SENSOR_STATE_PROCESSOR_DISABLED 0x0100 576 #define TOPO_SENSOR_STATE_PROCESSOR_TERMINATOR 0x0200 577 #define TOPO_SENSOR_STATE_PROCESSOR_THROTTLED 0x0400 578 579 #define TOPO_SENSOR_TYPE_POWER_SUPPLY 0x0008 580 581 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PRESENT 0x0001 582 #define TOPO_SENSOR_STATE_POWER_SUPPLY_FAILURE 0x0002 583 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PREDFAIL 0x0004 584 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_LOST 0x0008 585 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE 0x0010 586 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE_PRES 0x0020 587 #define TOPO_SENSOR_STATE_POWER_SUPPLY_CONFIG_ERR 0x0040 588 589 #define TOPO_SENSOR_TYPE_POWER_UNIT 0x0009 590 591 #define TOPO_SENSOR_STATE_POWER_UNIT_OFF 0x0001 592 #define TOPO_SENSOR_STATE_POWER_UNIT_CYCLE 0x0002 593 #define TOPO_SENSOR_STATE_POWER_UNIT_240_DOWN 0x0004 594 #define TOPO_SENSOR_STATE_POWER_UNIT_INTERLOCK_DOWN 0x0008 595 #define TOPO_SENSOR_STATE_POWER_UNIT_AC_LOST 0x0010 596 #define TOPO_SENSOR_STATE_POWER_UNIT_SOFT_FAILURE 0x0020 597 #define TOPO_SENSOR_STATE_POWER_UNIT_FAIL 0x0040 598 #define TOPO_SENSOR_STATE_POWER_UNIT_PREDFAIL 0x0080 599 600 #define TOPO_SENSOR_TYPE_COOLING 0x000A 601 #define TOPO_SENSOR_TYPE_OTHER 0x000B 602 603 #define TOPO_SENSOR_TYPE_MEMORY 0x000C 604 605 #define TOPO_SENSOR_STATE_MEMORY_CE 0x0001 606 #define TOPO_SENSOR_STATE_MEMORY_UE 0x0002 607 #define TOPO_SENSOR_STATE_MEMORY_PARITY 0x0004 608 #define TOPO_SENSOR_STATE_MEMORY_SCRUB_FAIL 0x0008 609 #define TOPO_SENSOR_STATE_MEMORY_DISABLED 0x0010 610 #define TOPO_SENSOR_STATE_MEMORY_CE_LOG_LIMIT 0x0020 611 #define TOPO_SENSOR_STATE_MEMORY_PRESENT 0x0040 612 #define TOPO_SENSOR_STATE_MEMORY_CONFIG_ERR 0x0080 613 #define TOPO_SENSOR_STATE_MEMORY_SPARE 0x0100 614 #define TOPO_SENSOR_STATE_MEMORY_THROTTLED 0x0200 615 #define TOPO_SENSOR_STATE_MEMORY_OVERTEMP 0x0400 616 617 #define TOPO_SENSOR_TYPE_BAY 0x000D 618 619 #define TOPO_SENSOR_STATE_BAY_PRESENT 0x0001 620 #define TOPO_SENSOR_STATE_BAY_FAULT 0x0002 621 #define TOPO_SENSOR_STATE_BAY_PREDFAIL 0x0004 622 #define TOPO_SENSOR_STATE_BAY_SPARE 0x0008 623 #define TOPO_SENSOR_STATE_BAY_CHECK 0x0010 624 #define TOPO_SENSOR_STATE_BAY_CRITICAL 0x0020 625 #define TOPO_SENSOR_STATE_BAY_FAILED 0x0040 626 #define TOPO_SENSOR_STATE_BAY_REBUILDING 0x0080 627 #define TOPO_SENSOR_STATE_BAY_ABORTED 0x0100 628 629 #define TOPO_SENSOR_TYPE_POST_RESIZE 0x000E 630 631 #define TOPO_SENSOR_TYPE_FIRMWARE 0x000F 632 633 #define TOPO_SENSOR_STATE_FIRMWARE_ERROR 0x0001 634 #define TOPO_SENSOR_STATE_FIRMWARE_HANG 0x0002 635 #define TOPO_SENSOR_STATE_FIRMWARE_PROGRESS 0x0004 636 637 #define TOPO_SENSOR_TYPE_EVENT_LOG 0x0010 638 639 #define TOPO_SENSOR_STATE_EVENT_LOG_CE 0x0001 640 #define TOPO_SENSOR_STATE_EVENT_LOG_TYPE 0x0002 641 #define TOPO_SENSOR_STATE_EVENT_LOG_RESET 0x0004 642 #define TOPO_SENSOR_STATE_EVENT_LOG_ALL 0x0008 643 #define TOPO_SENSOR_STATE_EVENT_LOG_FULL 0x0010 644 #define TOPO_SENSOR_STATE_EVENT_LOG_ALMOST_FULL 0x0020 645 646 #define TOPO_SENSOR_TYPE_WATCHDOG1 0x0011 647 648 #define TOPO_SENSOR_STATE_WATCHDOG_BIOS_RESET 0x0001 649 #define TOPO_SENSOR_STATE_WATCHDOG_OS_RESET 0x0002 650 #define TOPO_SENSOR_STATE_WATCHDOG_OS_SHUTDOWN 0x0004 651 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_DOWN 0x0008 652 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_CYCLE 0x0010 653 #define TOPO_SENSOR_STATE_WATCHDOG_OS_NMI_DIAG 0x0020 654 #define TOPO_SENSOR_STATE_WATCHDOG_EXPIRED 0x0040 655 #define TOPO_SENSOR_STATE_WATCHDOG_PRE_TIMEOUT_INT 0x0080 656 657 #define TOPO_SENSOR_TYPE_SYSTEM 0x0012 658 659 #define TOPO_SENSOR_STATE_SYSTEM_RECONF 0x0001 660 #define TOPO_SENSOR_STATE_SYSTEM_BOOT 0x0002 661 #define TOPO_SENSOR_STATE_SYSTEM_UNKNOWN_HW_FAILURE 0x0004 662 #define TOPO_SENSOR_STATE_SYSTEM_AUX_LOG_UPDATED 0x0008 663 #define TOPO_SENSOR_STATE_SYSTEM_PEF_ACTION 0x0010 664 #define TOPO_SENSOR_STATE_SYSTEM_TIMETAMP_CLOCKSYNC 0x0020 665 666 #define TOPO_SENSOR_TYPE_CRITICAL 0x0013 667 668 #define TOPO_SENSOR_STATE_CRITICAL_EXT_NMI 0x0001 669 #define TOPO_SENSOR_STATE_CRITICAL_BUS_TIMEOUT 0x0002 670 #define TOPO_SENSOR_STATE_CRITICAL_IO_NMI 0x0004 671 #define TOPO_SENSOR_STATE_CRITICAL_SW_NMI 0x0008 672 #define TOPO_SENSOR_STATE_CRITICAL_PCI_PERR 0x0010 673 #define TOPO_SENSOR_STATE_CRITICAL_PCI_SERR 0x0020 674 #define TOPO_SENSOR_STATE_CRITICAL_EISA_FAILSAFE 0x0040 675 #define TOPO_SENSOR_STATE_CRITICAL_BUS_CE 0x0080 676 #define TOPO_SENSOR_STATE_CRITICAL_BUS_UE 0x0100 677 #define TOPO_SENSOR_STATE_CRITICAL_FATAL_NMI 0x0200 678 #define TOPO_SENSOR_STATE_CRITICAL_BUS_FATAL_ERR 0x0400 679 #define TOPO_SENSOR_STATE_CRITICAL_BUS_DEGRADED 0x0800 680 681 #define TOPO_SENSOR_TYPE_BUTTON 0x0014 682 683 #define TOPO_SENSOR_STATE_BUTTON_PWR 0x0001 684 #define TOPO_SENSOR_STATE_BUTTON_SLEEP 0x0002 685 #define TOPO_SENSOR_STATE_BUTTON_RESET 0x0004 686 #define TOPO_SENSOR_STATE_BUTTON_FRU_LATCH 0x0008 687 #define TOPO_SENSOR_STATE_BUTTON_FRU_SERVICE 0x0010 688 689 #define TOPO_SENSOR_TYPE_MODULE 0x0015 690 #define TOPO_SENSOR_TYPE_MICROCONTROLLER 0x0016 691 #define TOPO_SENSOR_TYPE_CARD 0x0017 692 #define TOPO_SENSOR_TYPE_CHASSIS 0x0018 693 694 #define TOPO_SENSOR_TYPE_CHIPSET 0x0019 695 696 #define TOPO_SENSOR_STATE_CHIPSET_PWR_CTL_FAIL 0x0001 697 698 #define TOPO_SENSOR_TYPE_FRU 0x001A 699 700 #define TOPO_SENSOR_TYPE_CABLE 0x001B 701 702 #define TOPO_SENSOR_STATE_CABLE_CONNECTED 0x0001 703 #define TOPO_SENSOR_STATE_CABLE_CONFIG_ERR 0x0002 704 705 #define TOPO_SENSOR_TYPE_TERMINATOR 0x001C 706 707 #define TOPO_SENSOR_TYPE_BOOT_STATE 0x001D 708 709 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_PWR_UP 0x0001 710 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_HARD_RESET 0x0002 711 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_WARM_RESET 0x0004 712 #define TOPO_SENSOR_STATE_BOOT_STATE_PXE_BOOT 0x0008 713 #define TOPO_SENSOR_STATE_BOOT_STATE_DIAG_BOOT 0x0010 714 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_HARD_RESET 0x0020 715 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_WARM_RESET 0x0040 716 #define TOPO_SENSOR_STATE_BOOT_STATE_SYS_RESTART 0x0080 717 718 #define TOPO_SENSOR_TYPE_BOOT_ERROR 0x001E 719 720 #define TOPO_SENSOR_STATE_BOOT_ERROR_NOMEDIA 0x0001 721 #define TOPO_SENSOR_STATE_BOOT_ERROR_NON_BOOTABLE_DISK 0x0002 722 #define TOPO_SENSOR_STATE_BOOT_ERROR_NO_PXE_SERVER 0x0004 723 #define TOPO_SENSOR_STATE_BOOT_ERROR_INV_BOOT_SECT 0x0008 724 #define TOPO_SENSOR_STATE_BOOT_ERROR_USR_SELECT_TIMEOUT 0x0010 725 726 #define TOPO_SENSOR_TYPE_BOOT_OS 0x001F 727 728 #define TOPO_SENSOR_STATE_BOOT_OS_A_DRV_BOOT_COMPLETE 0x0001 729 #define TOPO_SENSOR_STATE_BOOT_OS_C_DRV_BOOT_COMPLETE 0x0002 730 #define TOPO_SENSOR_STATE_BOOT_OS_PXE_BOOT_COMPLETE 0x0004 731 #define TOPO_SENSOR_STATE_BOOT_OS_DIAG_BOOT_COMPLETE 0x0008 732 #define TOPO_SENSOR_STATE_BOOT_OS_CDROM_BOOT_COMPLETE 0x0010 733 #define TOPO_SENSOR_STATE_BOOT_OS_ROM_BOOT_COMPLETE 0x0020 734 #define TOPO_SENSOR_STATE_BOOT_OS_UNSPEC_BOOT_COMPLETE 0x0040 735 736 #define TOPO_SENSOR_TYPE_OS_SHUTDOWN 0x0020 737 738 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_LOADING 0x0001 739 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_CRASH 0x0002 740 #define TOPO_SENSOR_STATE_OS_STOP_GRACEFUL 0x0004 741 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_GRACEFUL 0x0008 742 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_PEF 0x0010 743 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_BMC 0x0020 744 745 #define TOPO_SENSOR_TYPE_SLOT 0x0021 746 747 #define TOPO_SENSOR_STATE_SLOT_FAULT_ASSERTED 0x0001 748 #define TOPO_SENSOR_STATE_SLOT_IDENTIFY_ASSERTED 0x0002 749 #define TOPO_SENSOR_STATE_SLOT_CONNECTED 0x0004 750 #define TOPO_SENSOR_STATE_SLOT_INSTALL_READY 0x0008 751 #define TOPO_SENSOR_STATE_SLOT_REMOVE_READY 0x0010 752 #define TOPO_SENSOR_STATE_SLOT_PWR_OFF 0x0020 753 #define TOPO_SENSOR_STATE_SLOT_REMOVED 0x0040 754 #define TOPO_SENSOR_STATE_SLOT_INTERLOCK_ASSERTED 0x0080 755 #define TOPO_SENSOR_STATE_SLOT_DISABLED 0x0100 756 #define TOPO_SENSOR_STATE_SLOT_SPARE_DEVICE 0x0200 757 758 #define TOPO_SENSOR_TYPE_ACPI 0x0022 759 760 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S0_G0 0x0001 761 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1 0x0002 762 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S2 0x0004 763 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S3 0x0008 764 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4 0x0010 765 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_G2_SOFT_OFF 0x0020 766 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4_S5_SOFT_OFF 0x0040 767 #define TOPO_SENSOR_STATE_ACPI_PSATTE_G3_MECH_OFF 0x0080 768 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1_S2_S3_SLEEP 0x0100 769 #define TOPO_SENSOR_STATE_ACPI_PSTATE_G1_SLEEP 0x0200 770 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_OVERRIDE 0x0400 771 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_ON 0x0800 772 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_OFF 0x1000 773 #define TOPO_SENSOR_STATE_ACPI_PSTATE_UNKNOWN 0x2000 774 775 #define TOPO_SENSOR_TYPE_WATCHDOG2 0x0023 776 777 #define TOPO_SENSOR_STATE_WATCHDOG2_EXPIRED 0x0001 778 #define TOPO_SENSOR_STATE_WATCHDOG2_HARD_RESET 0x0002 779 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_DOWN 0x0004 780 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_CYCLE 0x0008 781 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED1 0x0010 782 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED2 0x0020 783 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED3 0x0040 784 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED4 0x0080 785 #define TOPO_SENSOR_STATE_WATCHDOG2_TIMEOUT_INT 0x0100 786 787 #define TOPO_SENSOR_TYPE_ALERT 0x0024 788 789 #define TOPO_SENSOR_STATE_ALERT_PLAT_PAGE 0x0001 790 #define TOPO_SENSOR_STATE_ALERT_PLAT_LAN_ALERT 0x0002 791 #define TOPO_SENSOR_STATE_ALERT_PLAT_EVT_TRAP 0x0004 792 #define TOPO_SENSOR_STATE_ALERT_PLAT_SNMP_TRAP 0x0008 793 794 #define TOPO_SENSOR_TYPE_PRESENCE 0x0025 795 796 #define TOPO_SENSOR_STATE_PRESENCE_PRESENT 0x0001 797 #define TOPO_SENSOR_STATE_PRESENCE_ABSENT 0x0002 798 #define TOPO_SENSOR_STATE_PRESENCE_DISABLED 0x0004 799 800 #define TOPO_SENSOR_TYPE_ASIC 0x0026 801 802 #define TOPO_SENSOR_TYPE_LAN 0x0027 803 804 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT_LOST 0x0001 805 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT 0x0002 806 807 #define TOPO_SENSOR_TYPE_HEALTH 0x0028 808 809 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_ACC_DEGRADED 0x0001 810 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_ACC_DEGRADED 0x0002 811 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_OFFLINE 0x0004 812 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_UNAVAIL 0x0008 813 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_FAILURE 0x0010 814 #define TOPO_SENSOR_STATE_HEALTH_FRU_FAILURE 0x0020 815 816 #define TOPO_SENSOR_TYPE_BATTERY 0x0029 817 818 #define TOPO_SENSOR_STATE_BATTERY_LOW 0x0001 819 #define TOPO_SENSOR_STATE_BATTERY_FAILED 0x0002 820 #define TOPO_SENSOR_STATE_BATTERY_PRESENCE 0x0004 821 822 #define TOPO_SENSOR_TYPE_AUDIT 0x002A 823 824 #define TOPO_SENSOR_STATE_AUDIT_SESSION_ACTIVATED 0x0001 825 #define TOPO_SENSOR_STATE_AUDIT_SESSION_DEACTIVATED 0x0002 826 827 #define TOPO_SENSOR_TYPE_VERSION 0x002B 828 829 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE 0x0001 830 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE 0x0002 831 #define TOPO_SENSOR_STATE_VERSION_HW_INCOMPATIBLE 0x0004 832 #define TOPO_SENSOR_STATE_VERSION_SW_INCOMPATIBLE 0x0008 833 #define TOPO_SENSOR_STATE_VERSION_HW_INVAL 0x0010 834 #define TOPO_SENSOR_STATE_VERSION_SW_INVAL 0x0020 835 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE_SUCCESS 0x0040 836 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE_SUCCESS 0x0080 837 838 #define TOPO_SENSOR_TYPE_FRU_STATE 0x002C 839 840 #define TOPO_SENSOR_STATE_FRU_STATE_NOT_INSTALLED 0x0001 841 #define TOPO_SENSOR_STATE_FRU_STATE_INACTIVE 0x0002 842 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_REQ 0x0004 843 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_INPROGRESS 0x0008 844 #define TOPO_SENSOR_STATE_FRU_STATE_ACTIVE 0x0010 845 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_REQ 0x0020 846 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_INPROGRESS 0x0040 847 #define TOPO_SENSOR_STATE_FRU_STATE_COMM_LOST 0x0080 848 849 /* 850 * We simplify the IPMI sensor type code defines by combining the generic 851 * and sensor-specific codes into a single range. Because there's overlap 852 * between the two ranges we offset the generic type codes by 0x0100 853 * which allows ample room in the hole for future expansion of the table to 854 * accomodate either additions to the IPMI spec or to support new sensor types 855 * for alternate provider modules. 856 */ 857 #define TOPO_SENSOR_TYPE_THRESHOLD_STATE 0x0101 858 859 #define TOPO_SENSOR_THRESH_LOWER_NONCRIT 0x0001 860 #define TOPO_SENSOR_THRESH_LOWER_CRIT 0x0002 861 #define TOPO_SENSOR_THRESH_LOWER_NONREC 0x0004 862 #define TOPO_SENSOR_THRESH_UPPER_NONCRIT 0x0008 863 #define TOPO_SENSOR_THRESH_UPPER_CRIT 0x0010 864 #define TOPO_SENSOR_THRESH_UPPER_NONREC 0x0020 865 866 #define TOPO_SENSOR_TYPE_GENERIC_USAGE 0x0102 867 868 #define TOPO_SENSOR_STATE_GENERIC_USAGE_IDLE 0x0001 869 #define TOPO_SENSOR_STATE_GENERIC_USAGE_ACTIVE 0x0002 870 #define TOPO_SENSOR_STATE_GENERIC_USAGE_BUSY 0x0004 871 872 #define TOPO_SENSOR_TYPE_GENERIC_STATE 0x0103 873 874 #define TOPO_SENSOR_STATE_GENERIC_STATE_DEASSERTED 0x0001 875 #define TOPO_SENSOR_STATE_GENERIC_STATE_ASSERTED 0x0002 876 877 #define TOPO_SENSOR_TYPE_GENERIC_PREDFAIL 0x0104 878 879 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_DEASSERTED 0x0001 880 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_ASSERTED 0x0002 881 882 #define TOPO_SENSOR_TYPE_GENERIC_LIMIT 0x0105 883 884 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_NOT_EXCEEDED 0x0001 885 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_EXCEEDED 0x0002 886 887 #define TOPO_SENSOR_TYPE_GENERIC_PERFORMANCE 0x0106 888 889 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_MET 0x0001 890 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_LAGS 0x0002 891 892 #define TOPO_SENSOR_TYPE_SEVERITY 0x0107 893 894 #define TOPO_SENSOR_STATE_SEVERITY_OK 0x0001 895 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_HIGH 0x0002 896 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_HIGH 0x0004 897 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_HIGH 0x0008 898 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_LOW 0x0010 899 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_LOW 0x0020 900 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_LOW 0x0020 901 #define TOPO_SENSOR_STATE_SEVERITY_MONITOR 0x0040 902 #define TOPO_SENSOR_STATE_SEVERITY_INFORMATIONAL 0x0080 903 904 #define TOPO_SENSOR_TYPE_GENERIC_PRESENCE 0x0108 905 906 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_DEASSERTED 0x0001 907 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_ASSERTED 0x0002 908 909 #define TOPO_SENSOR_TYPE_GENERIC_AVAILABILITY 0x0109 910 911 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_DEASSERTED 0x0001 912 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_ASSERTED 0x0002 913 914 #define TOPO_SENSOR_TYPE_GENERIC_STATUS 0x010A 915 916 #define TOPO_SENSOR_STATE_GENERIC_STATUS_RUNNING 0x0001 917 #define TOPO_SENSOR_STATE_GENERIC_STATUS_IN_TEST 0x0002 918 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_OFF 0x0004 919 #define TOPO_SENSOR_STATE_GENERIC_STATUS_ONLINE 0x0008 920 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFFLINE 0x0010 921 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFF_DUTY 0x0020 922 #define TOPO_SENSOR_STATE_GENERIC_STATUS_DEGRADED 0x0040 923 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_SAVE 0x0080 924 #define TOPO_SENSOR_STATE_GENERIC_STATUS_INSTALL_ERR 0x0100 925 926 #define TOPO_SENSOR_TYPE_GENERIC_REDUNDANCY 0x010B 927 928 /* 929 * ACPI power state 930 */ 931 #define TOPO_SENSOR_TYPE_GENERIC_ACPI 0x010C 932 933 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D0 0x0001 934 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D1 0x0002 935 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D2 0x0004 936 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D3 0x0008 937 938 /* 939 * Indicator modes and types 940 */ 941 typedef enum topo_led_state { 942 TOPO_LED_STATE_OFF = 0, 943 TOPO_LED_STATE_ON 944 } topo_led_state_t; 945 946 /* 947 * This list is limited to the set of LED's that we're likely to manage through 948 * FMA. Thus is does not include things like power or activity LED's 949 */ 950 typedef enum topo_led_type { 951 TOPO_LED_TYPE_SERVICE = 0, 952 TOPO_LED_TYPE_LOCATE, 953 TOPO_LED_TYPE_OK2RM, 954 TOPO_LED_TYPE_PRESENT 955 } topo_led_type_t; 956 957 958 #ifdef __cplusplus 959 } 960 #endif 961 962 #endif /* _LIBTOPO_H */ 963